[UTC 2018-12-18 17:43:08] 17:43:08 Received message from Master: op=Log open serial=255549 17:43:08 Log file open: Observatory C:\PKZPrograms\Logs\20181217 \ PKZ20181218174308_Observatory.txt 17:43:08 Previous log file: 17:43:13 Received message from Master: op=Log directory change serial=255551 17:43:13 Log file directory changed from C:\PKZPrograms\Logs\20181217 to C:\PKZPrograms\Logs\20181218 17:43:13 Log file name is PKZ20181218174313_Observatory.txt 17:45:27 Received message from Master: op=Identify serial=255559 17:55:27 No messages received for 10 min. 6552 sent since last one of these. 17:55:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 17:55:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:55:27 MsgArea S: [UTC 2018-12-18 17:55:52] 18:05:27 No messages received for 10 min. 0 sent since last one of these. 18:05:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 18:05:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:05:27 MsgArea S: 18:15:27 No messages received for 10 min. 0 sent since last one of these. 18:15:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 18:15:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:15:27 MsgArea S: [UTC 2018-12-18 18:15:52] 18:25:27 No messages received for 10 min. 0 sent since last one of these. 18:25:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 18:25:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:25:27 MsgArea S: 18:35:27 No messages received for 10 min. 0 sent since last one of these. 18:35:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 18:35:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:35:27 MsgArea S: [UTC 2018-12-18 18:35:52] 18:45:27 No messages received for 10 min. 0 sent since last one of these. 18:45:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 18:45:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:45:27 MsgArea S: 18:55:27 No messages received for 10 min. 0 sent since last one of these. 18:55:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 18:55:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:55:27 MsgArea S: [UTC 2018-12-18 18:55:52] 19:05:27 No messages received for 10 min. 0 sent since last one of these. 19:05:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 19:05:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:05:27 MsgArea S: 19:15:27 No messages received for 10 min. 0 sent since last one of these. 19:15:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 19:15:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:15:27 MsgArea S: [UTC 2018-12-18 19:15:52] 19:25:27 No messages received for 10 min. 0 sent since last one of these. 19:25:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 19:25:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:25:27 MsgArea S: 19:35:27 No messages received for 10 min. 0 sent since last one of these. 19:35:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 19:35:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:35:27 MsgArea S: [UTC 2018-12-18 19:35:52] 19:45:27 No messages received for 10 min. 0 sent since last one of these. 19:45:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 19:45:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:45:27 MsgArea S: 19:55:27 No messages received for 10 min. 0 sent since last one of these. 19:55:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 19:55:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:55:27 MsgArea S: [UTC 2018-12-18 19:55:52] 20:05:27 No messages received for 10 min. 0 sent since last one of these. 20:05:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 20:05:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:05:27 MsgArea S: 20:15:27 No messages received for 10 min. 0 sent since last one of these. 20:15:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 20:15:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:15:27 MsgArea S: [UTC 2018-12-18 20:15:52] 20:25:27 No messages received for 10 min. 0 sent since last one of these. 20:25:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 20:25:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:25:27 MsgArea S: 20:35:27 No messages received for 10 min. 0 sent since last one of these. 20:35:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 20:35:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:35:27 MsgArea S: [UTC 2018-12-18 20:35:52] 20:45:27 No messages received for 10 min. 0 sent since last one of these. 20:45:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 20:45:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:45:27 MsgArea S: 20:55:27 No messages received for 10 min. 0 sent since last one of these. 20:55:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 20:55:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:55:27 MsgArea S: [UTC 2018-12-18 20:55:52] 21:05:27 No messages received for 10 min. 0 sent since last one of these. 21:05:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 21:05:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:05:27 MsgArea S: 21:15:27 No messages received for 10 min. 0 sent since last one of these. 21:15:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 21:15:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:15:27 MsgArea S: [UTC 2018-12-18 21:15:52] 21:25:27 No messages received for 10 min. 0 sent since last one of these. 21:25:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 21:25:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:25:27 MsgArea S: 21:35:27 No messages received for 10 min. 0 sent since last one of these. 21:35:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 21:35:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:35:27 MsgArea S: [UTC 2018-12-18 21:35:52] 21:45:27 No messages received for 10 min. 0 sent since last one of these. 21:45:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 21:45:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:45:27 MsgArea S: 21:55:27 No messages received for 10 min. 0 sent since last one of these. 21:55:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 21:55:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:55:27 MsgArea S: [UTC 2018-12-18 21:55:52] 22:05:27 No messages received for 10 min. 0 sent since last one of these. 22:05:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 22:05:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:05:27 MsgArea S: 22:15:27 No messages received for 10 min. 0 sent since last one of these. 22:15:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 22:15:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:15:27 MsgArea S: [UTC 2018-12-18 22:15:52] 22:25:27 No messages received for 10 min. 0 sent since last one of these. 22:25:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 22:25:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:25:27 MsgArea S: 22:35:27 No messages received for 10 min. 0 sent since last one of these. 22:35:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 22:35:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:35:27 MsgArea S: [UTC 2018-12-18 22:35:52] 22:45:27 No messages received for 10 min. 0 sent since last one of these. 22:45:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 22:45:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:45:27 MsgArea S: 22:55:27 No messages received for 10 min. 0 sent since last one of these. 22:55:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 22:55:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:55:27 MsgArea S: [UTC 2018-12-18 22:55:52] 23:05:27 No messages received for 10 min. 0 sent since last one of these. 23:05:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 23:05:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:05:27 MsgArea S: 23:15:27 No messages received for 10 min. 0 sent since last one of these. 23:15:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 23:15:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:15:27 MsgArea S: [UTC 2018-12-18 23:15:52] 23:25:27 No messages received for 10 min. 0 sent since last one of these. 23:25:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 23:25:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:25:27 MsgArea S: 23:35:27 No messages received for 10 min. 0 sent since last one of these. 23:35:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 23:35:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:35:27 MsgArea S: [UTC 2018-12-18 23:35:52] 23:45:27 No messages received for 10 min. 0 sent since last one of these. 23:45:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 23:45:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:45:27 MsgArea S: 23:55:27 No messages received for 10 min. 0 sent since last one of these. 23:55:27 MsgArea H: nextMessageSerial=255562 startMsgs=68 nextFree=30192 maxMsg=65468 23:55:27 MsgArea Q: Master=29580:29988 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:55:27 MsgArea S: 23:55:27 Received message from Master: op=PointingHead serial=255563 23:55:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:55:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:55:27 Point started: ret=0 23:55:27 point_skyscan result=0 23:55:28 Check angles 23:55:28 SkyScan query 23:55:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:55:29 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:55:29 Message to Master queued w/err=0: serial=255563 error=0 23:55:34 Received message from Master: op=Filter serial=255564 23:55:34 Color wheel filter change from 2 to 2 23:55:34 FLIGetFilterPos err=0 currentPosition=2 23:55:34 FLIGetStepsRemaining err=0 RemainingSteps=0 23:55:34 Filter is already there-color wheel unchanged 23:55:34 Received message from Master: op=Shutter serial=255565 23:55:34 Shutter LASER close 23:55:35 Received message from Camera: op=State serial=255567 23:55:35 GetSingleValue result=40 Value=cccccccc 23:55:35 SkyScan query 23:55:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:55:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:55:36 Parameters OK 23:55:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:55:36 Set A/D data flow result=40 23:55:36 Set A/D channel type result=40 23:55:36 Set A/D encoding result=40 23:55:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:55:36 Set channel filter=0.000000e+000 result=40 23:55:36 Config A/D Result=40 23:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:55:36 Get A/D filter: -9.255963e+061 result=40 23:55:36 Get A/D value=-858993460 result=40 23:55:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:55:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:55:36 Parameters OK 23:55:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:55:36 Set A/D data flow result=40 23:55:36 Set A/D channel type result=40 23:55:36 Set A/D encoding result=40 23:55:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:55:36 Set channel filter=0.000000e+000 result=40 23:55:36 Config A/D Result=40 23:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:55:36 Get A/D filter: -9.255963e+061 result=40 23:55:36 Get A/D value=-858993460 result=40 23:55:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:55:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:55:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:55:36 Aux= 23:55:36 Message to Camera, serial 255567 queued 23:55:42 Received message from Master: op=PointingHead serial=255578 23:55:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:55:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:55:42 Point started: ret=0 23:55:42 point_skyscan result=0 23:55:43 Check angles 23:55:43 SkyScan query 23:55:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:55:43 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:55:43 Message to Master queued w/err=0: serial=255578 error=0 23:55:48 Received message from Master: op=Filter serial=255579 23:55:48 Color wheel filter change from 2 to 2 23:55:48 FLIGetFilterPos err=0 currentPosition=2 23:55:48 FLIGetStepsRemaining err=0 RemainingSteps=0 23:55:48 Filter is already there-color wheel unchanged 23:55:48 Received message from Master: op=Shutter serial=255580 23:55:48 Shutter LASER close 23:55:49 Received message from Camera: op=State serial=255582 23:55:49 GetSingleValue result=40 Value=cccccccc 23:55:49 SkyScan query 23:55:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:55:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:55:49 Parameters OK 23:55:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:55:49 Set A/D data flow result=40 23:55:49 Set A/D channel type result=40 23:55:49 Set A/D encoding result=40 23:55:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:55:49 Set channel filter=0.000000e+000 result=40 23:55:49 Config A/D Result=40 23:55:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:55:49 Get A/D filter: -9.255963e+061 result=40 23:55:49 Get A/D value=-858993460 result=40 23:55:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:55:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:55:49 Parameters OK 23:55:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:55:49 Set A/D data flow result=40 23:55:49 Set A/D channel type result=40 23:55:49 Set A/D encoding result=40 23:55:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:55:49 Set channel filter=0.000000e+000 result=40 23:55:49 Config A/D Result=40 23:55:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:55:49 Get A/D filter: -9.255963e+061 result=40 23:55:49 Get A/D value=-858993460 result=40 23:55:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:55:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:55:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:55:49 Aux= 23:55:49 Message to Camera, serial 255582 queued [UTC 2018-12-18 23:55:52] 23:56:25 Received message from Master: op=PointingHead serial=255594 23:56:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:56:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:56:25 Point started: ret=0 23:56:25 point_skyscan result=0 23:56:26 Check angles 23:56:26 SkyScan query 23:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:56:27 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:56:27 Message to Master queued w/err=0: serial=255594 error=0 23:56:32 Received message from Master: op=Filter serial=255595 23:56:32 Color wheel filter change from 2 to 2 23:56:32 FLIGetFilterPos err=0 currentPosition=2 23:56:32 FLIGetStepsRemaining err=0 RemainingSteps=0 23:56:32 Filter is already there-color wheel unchanged 23:56:32 Received message from Master: op=Shutter serial=255596 23:56:32 Shutter LASER open 23:56:32 Received message from Camera: op=State serial=255598 23:56:32 GetSingleValue result=40 Value=cccccccc 23:56:32 SkyScan query 23:56:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:56:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:56:33 Parameters OK 23:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:56:33 Set A/D data flow result=40 23:56:33 Set A/D channel type result=40 23:56:33 Set A/D encoding result=40 23:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:56:33 Set channel filter=0.000000e+000 result=40 23:56:33 Config A/D Result=40 23:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:56:33 Get A/D filter: -9.255963e+061 result=40 23:56:33 Get A/D value=-858993460 result=40 23:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:56:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:56:33 Parameters OK 23:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:56:33 Set A/D data flow result=40 23:56:33 Set A/D channel type result=40 23:56:33 Set A/D encoding result=40 23:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:56:33 Set channel filter=0.000000e+000 result=40 23:56:33 Config A/D Result=40 23:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:56:33 Get A/D filter: -9.255963e+061 result=40 23:56:33 Get A/D value=-858993460 result=40 23:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:56:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:56:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:56:33 Aux= 23:56:33 Message to Camera, serial 255598 queued 23:56:41 Received message from Master: op=Shutter serial=255608 23:56:41 Shutter LASER close 23:56:41 Received message from Master: op=PointingHead serial=255612 23:56:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:56:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:56:42 Point started: ret=0 23:56:42 point_skyscan result=0 23:56:43 Check angles 23:56:43 SkyScan query 23:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:56:43 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:56:43 Message to Master queued w/err=0: serial=255612 error=0 23:56:48 Received message from Master: op=Filter serial=255613 23:56:48 Color wheel filter change from 2 to 2 23:56:48 FLIGetFilterPos err=0 currentPosition=2 23:56:48 FLIGetStepsRemaining err=0 RemainingSteps=0 23:56:48 Filter is already there-color wheel unchanged 23:56:48 Received message from Master: op=Shutter serial=255614 23:56:48 Shutter LASER close 23:56:49 Received message from Camera: op=State serial=255616 23:56:49 GetSingleValue result=40 Value=cccccccc 23:56:49 SkyScan query 23:56:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:56:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:56:49 Parameters OK 23:56:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:56:49 Set A/D data flow result=40 23:56:49 Set A/D channel type result=40 23:56:49 Set A/D encoding result=40 23:56:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:56:49 Set channel filter=0.000000e+000 result=40 23:56:49 Config A/D Result=40 23:56:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:56:49 Get A/D filter: -9.255963e+061 result=40 23:56:49 Get A/D value=-858993460 result=40 23:56:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:56:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:56:49 Parameters OK 23:56:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:56:49 Set A/D data flow result=40 23:56:49 Set A/D channel type result=40 23:56:49 Set A/D encoding result=40 23:56:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:56:49 Set channel filter=0.000000e+000 result=40 23:56:49 Config A/D Result=40 23:56:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:56:49 Get A/D filter: -9.255963e+061 result=40 23:56:49 Get A/D value=-858993460 result=40 23:56:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:56:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:56:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:56:49 Aux= 23:56:49 Message to Camera, serial 255616 queued 23:56:57 Received message from Master: op=PointingHead serial=255628 23:56:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 23:56:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 23:56:57 Point started: ret=0 23:56:57 point_skyscan result=0 23:56:58 Check angles 23:56:58 SkyScan query 23:56:59 SkyScan query done: ret=0 az=136.275<-9085 ze=-142.875<-21525 Statuses=0009 0009 23:56:59 Msec=0 True Az=136.275 Ze=-142.875 Az status=0009 Ze status=0009 23:56:59 Check angles 23:56:59 SkyScan query 23:56:59 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.86<-20124 Statuses=0009 0009 23:56:59 Msec=750 True Az=153.81 Ze=-121.86 Az status=0009 Ze status=0009 23:57:00 Check angles 23:57:00 SkyScan query 23:57:00 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.95<-18730 Statuses=0009 0009 23:57:00 Msec=1500 True Az=171.255 Ze=-100.95 Az status=0009 Ze status=0009 23:57:00 Check angles 23:57:00 SkyScan query 23:57:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.025<-17335 Statuses=0008 0009 23:57:01 Msec=2250 True Az=175.995 Ze=-80.025 Az status=0008 Ze status=0009 23:57:01 Check angles 23:57:01 SkyScan query 23:57:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.04<-15936 Statuses=0008 0009 23:57:02 Msec=3000 True Az=175.995 Ze=-59.04 Az status=0008 Ze status=0009 23:57:02 Check angles 23:57:02 SkyScan query 23:57:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 23:57:02 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 23:57:02 Message to Master queued w/err=0: serial=255628 error=0 23:57:07 Received message from Master: op=Filter serial=255629 23:57:07 Color wheel filter change from 2 to 0 23:57:07 FLIGetFilterPos err=0 currentPosition=2 23:57:07 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:14 FLISetFilterPos err=0 rqPosition=0 23:57:14 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:14 Check after 0.00 sec for filter wheel DIn/CWh=0 23:57:14 FLIGetFilterPos err=0 currentPosition=0 23:57:14 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:14 Received message from Master: op=Shutter serial=255630 23:57:14 Shutter LASER close 23:57:14 Received message from Camera: op=State serial=255632 23:57:14 GetSingleValue result=40 Value=cccccccc 23:57:14 SkyScan query 23:57:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 23:57:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:15 Parameters OK 23:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:15 Set A/D data flow result=40 23:57:15 Set A/D channel type result=40 23:57:15 Set A/D encoding result=40 23:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:15 Set channel filter=0.000000e+000 result=40 23:57:15 Config A/D Result=40 23:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:15 Get A/D filter: -9.255963e+061 result=40 23:57:15 Get A/D value=-858993460 result=40 23:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:15 Parameters OK 23:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:15 Set A/D data flow result=40 23:57:15 Set A/D channel type result=40 23:57:15 Set A/D encoding result=40 23:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:15 Set channel filter=0.000000e+000 result=40 23:57:15 Config A/D Result=40 23:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:15 Get A/D filter: -9.255963e+061 result=40 23:57:15 Get A/D value=-858993460 result=40 23:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:57:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:57:15 Aux= 23:57:15 Message to Camera, serial 255632 queued 23:57:51 Received message from Master: op=PointingHead serial=255645 23:57:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 23:57:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 23:57:52 Point started: ret=0 23:57:52 point_skyscan result=0 23:57:53 Check angles 23:57:53 SkyScan query 23:57:53 SkyScan query done: ret=0 az=152.61<-10174 ze=-21.27<-13418 Statuses=0009 0009 23:57:53 Msec=0 True Az=152.61 Ze=-21.27 Az status=0009 Ze status=0009 23:57:53 Check angles 23:57:53 SkyScan query 23:57:54 SkyScan query done: ret=0 az=135.03<-9002 ze=-0.27<-12018 Statuses=0009 0009 23:57:54 Msec=750 True Az=135.03 Ze=-0.27 Az status=0009 Ze status=0009 23:57:54 Check angles 23:57:54 SkyScan query 23:57:55 SkyScan query done: ret=0 az=117.555<-7837 ze=20.685<-10621 Statuses=0009 0009 23:57:55 Msec=1500 True Az=117.555 Ze=20.685 Az status=0009 Ze status=0009 23:57:55 Check angles 23:57:55 SkyScan query 23:57:55 SkyScan query done: ret=0 az=100.17<-6678 ze=41.67<-9222 Statuses=0009 0009 23:57:55 Msec=2250 True Az=100.17 Ze=41.67 Az status=0009 Ze status=0009 23:57:56 Check angles 23:57:56 SkyScan query 23:57:56 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 23:57:56 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 23:57:56 Check angles 23:57:56 SkyScan query 23:57:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 23:57:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 23:57:57 Message to Master queued w/err=0: serial=255645 error=0 23:58:02 Received message from Master: op=Filter serial=255646 23:58:02 Color wheel filter change from 0 to 0 23:58:02 FLIGetFilterPos err=0 currentPosition=0 23:58:02 FLIGetStepsRemaining err=0 RemainingSteps=0 23:58:02 Filter is already there-color wheel unchanged 23:58:02 Received message from Master: op=Shutter serial=255647 23:58:02 Shutter LASER close 23:58:02 Received message from Camera: op=State serial=255649 23:58:02 GetSingleValue result=40 Value=cccccccc 23:58:02 SkyScan query 23:58:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 23:58:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:03 Parameters OK 23:58:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:03 Set A/D data flow result=40 23:58:03 Set A/D channel type result=40 23:58:03 Set A/D encoding result=40 23:58:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:03 Set channel filter=0.000000e+000 result=40 23:58:03 Config A/D Result=40 23:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:03 Get A/D filter: -9.255963e+061 result=40 23:58:03 Get A/D value=-858993460 result=40 23:58:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:03 Parameters OK 23:58:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:03 Set A/D data flow result=40 23:58:03 Set A/D channel type result=40 23:58:03 Set A/D encoding result=40 23:58:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:03 Set channel filter=0.000000e+000 result=40 23:58:03 Config A/D Result=40 23:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:03 Get A/D filter: -9.255963e+061 result=40 23:58:03 Get A/D value=-858993460 result=40 23:58:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:58:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:58:03 Aux= 23:58:03 Message to Camera, serial 255649 queued 23:58:39 Received message from Master: op=PointingHead serial=255662 23:58:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 23:58:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 23:58:40 Point started: ret=0 23:58:40 point_skyscan result=0 23:58:41 Check angles 23:58:41 SkyScan query 23:58:41 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 23:58:41 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 23:58:41 Check angles 23:58:41 SkyScan query 23:58:42 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 23:58:42 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 23:58:42 Check angles 23:58:42 SkyScan query 23:58:43 SkyScan query done: ret=0 az=144.015<-9601 ze=38.505<-9433 Statuses=0009 0008 23:58:43 Msec=1500 True Az=144.015 Ze=38.505 Az status=0009 Ze status=0008 23:58:43 Check angles 23:58:43 SkyScan query 23:58:43 SkyScan query done: ret=0 az=161.49<-10766 ze=38.505<-9433 Statuses=0009 0008 23:58:43 Msec=2250 True Az=161.49 Ze=38.505 Az status=0009 Ze status=0008 23:58:44 Check angles 23:58:44 SkyScan query 23:58:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 23:58:44 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 23:58:44 Check angles 23:58:44 SkyScan query 23:58:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 23:58:45 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 23:58:45 Message to Master queued w/err=0: serial=255662 error=0 23:58:50 Received message from Master: op=Filter serial=255663 23:58:50 Color wheel filter change from 0 to 0 23:58:50 FLIGetFilterPos err=0 currentPosition=0 23:58:50 FLIGetStepsRemaining err=0 RemainingSteps=0 23:58:50 Filter is already there-color wheel unchanged 23:58:50 Received message from Master: op=Shutter serial=255664 23:58:50 Shutter LASER close 23:58:50 Received message from Camera: op=State serial=255666 23:58:50 GetSingleValue result=40 Value=cccccccc 23:58:50 SkyScan query 23:58:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 23:58:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:51 Parameters OK 23:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:51 Set A/D data flow result=40 23:58:51 Set A/D channel type result=40 23:58:51 Set A/D encoding result=40 23:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:51 Set channel filter=0.000000e+000 result=40 23:58:51 Config A/D Result=40 23:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:51 Get A/D filter: -9.255963e+061 result=40 23:58:51 Get A/D value=-858993460 result=40 23:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:51 Parameters OK 23:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:51 Set A/D data flow result=40 23:58:51 Set A/D channel type result=40 23:58:51 Set A/D encoding result=40 23:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:51 Set channel filter=0.000000e+000 result=40 23:58:51 Config A/D Result=40 23:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:51 Get A/D filter: -9.255963e+061 result=40 23:58:51 Get A/D value=-858993460 result=40 23:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:58:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:58:51 Aux= 23:58:51 Message to Camera, serial 255666 queued 23:59:28 Received message from Master: op=PointingHead serial=255679 23:59:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 23:59:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 23:59:28 Point started: ret=0 23:59:28 point_skyscan result=0 23:59:29 Check angles 23:59:29 SkyScan query 23:59:29 SkyScan query done: ret=0 az=153.195<-10213 ze=8.895<-11407 Statuses=0009 0009 23:59:29 Msec=0 True Az=153.195 Ze=8.895 Az status=0009 Ze status=0009 23:59:29 Check angles 23:59:29 SkyScan query 23:59:30 SkyScan query done: ret=0 az=135.795<-9053 ze=-12.06<-12804 Statuses=0009 0009 23:59:30 Msec=750 True Az=135.795 Ze=-12.06 Az status=0009 Ze status=0009 23:59:30 Check angles 23:59:30 SkyScan query 23:59:31 SkyScan query done: ret=0 az=118.26<-7884 ze=-33.015<-14201 Statuses=0009 0009 23:59:31 Msec=1500 True Az=118.26 Ze=-33.015 Az status=0009 Ze status=0009 23:59:31 Check angles 23:59:31 SkyScan query 23:59:32 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.555<-15437 Statuses=0009 0009 23:59:32 Msec=2250 True Az=100.485 Ze=-51.555 Az status=0009 Ze status=0009 23:59:32 Check angles 23:59:32 SkyScan query 23:59:32 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 23:59:32 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 23:59:32 Check angles 23:59:32 SkyScan query 23:59:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 23:59:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 23:59:33 Message to Master queued w/err=0: serial=255679 error=0 23:59:38 Received message from Master: op=Filter serial=255680 23:59:38 Color wheel filter change from 0 to 0 23:59:38 FLIGetFilterPos err=0 currentPosition=0 23:59:38 FLIGetStepsRemaining err=0 RemainingSteps=0 23:59:38 Filter is already there-color wheel unchanged 23:59:38 Received message from Master: op=Shutter serial=255681 23:59:38 Shutter LASER close 23:59:38 Received message from Camera: op=State serial=255683 23:59:38 GetSingleValue result=40 Value=cccccccc 23:59:38 SkyScan query 23:59:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 23:59:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:59:39 Parameters OK 23:59:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:59:39 Set A/D data flow result=40 23:59:39 Set A/D channel type result=40 23:59:39 Set A/D encoding result=40 23:59:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:59:39 Set channel filter=0.000000e+000 result=40 23:59:39 Config A/D Result=40 23:59:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:59:39 Get A/D filter: -9.255963e+061 result=40 23:59:39 Get A/D value=-858993460 result=40 23:59:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:59:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:59:39 Parameters OK 23:59:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:59:39 Set A/D data flow result=40 23:59:39 Set A/D channel type result=40 23:59:39 Set A/D encoding result=40 23:59:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:59:39 Set channel filter=0.000000e+000 result=40 23:59:39 Config A/D Result=40 23:59:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:59:39 Get A/D filter: -9.255963e+061 result=40 23:59:39 Get A/D value=-858993460 result=40 23:59:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:59:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:59:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:59:39 Aux= 23:59:39 Message to Camera, serial 255683 queued 00:00:16 Received message from Master: op=PointingHead serial=255696 00:00:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:00:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:00:16 Point started: ret=0 00:00:16 point_skyscan result=0 00:00:17 Check angles 00:00:17 SkyScan query 00:00:17 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.285<-17419 Statuses=0009 0009 00:00:17 Msec=0 True Az=109.02 Ze=-81.285 Az status=0009 Ze status=0009 00:00:18 Check angles 00:00:18 SkyScan query 00:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 00:00:18 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 00:00:18 Check angles 00:00:18 SkyScan query 00:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.18<-20212 Statuses=0008 0009 00:00:19 Msec=1500 True Az=112.995 Ze=-123.18 Az status=0008 Ze status=0009 00:00:19 Check angles 00:00:19 SkyScan query 00:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 00:00:20 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 00:00:20 Check angles 00:00:20 SkyScan query 00:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 00:00:20 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 00:00:21 Check angles 00:00:21 SkyScan query 00:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:00:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:00:21 Message to Master queued w/err=0: serial=255696 error=0 00:00:26 Received message from Master: op=Filter serial=255697 00:00:26 Color wheel filter change from 0 to 0 00:00:26 FLIGetFilterPos err=0 currentPosition=0 00:00:26 FLIGetStepsRemaining err=0 RemainingSteps=0 00:00:26 Filter is already there-color wheel unchanged 00:00:26 Received message from Master: op=Shutter serial=255698 00:00:26 Shutter LASER open 00:00:26 Received message from Camera: op=State serial=255700 00:00:26 GetSingleValue result=40 Value=cccccccc 00:00:26 SkyScan query 00:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:00:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:27 Parameters OK 00:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:27 Set A/D data flow result=40 00:00:27 Set A/D channel type result=40 00:00:27 Set A/D encoding result=40 00:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:27 Set channel filter=0.000000e+000 result=40 00:00:27 Config A/D Result=40 00:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:27 Get A/D filter: -9.255963e+061 result=40 00:00:27 Get A/D value=-858993460 result=40 00:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:27 Parameters OK 00:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:27 Set A/D data flow result=40 00:00:27 Set A/D channel type result=40 00:00:27 Set A/D encoding result=40 00:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:27 Set channel filter=0.000000e+000 result=40 00:00:27 Config A/D Result=40 00:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:27 Get A/D filter: -9.255963e+061 result=40 00:00:27 Get A/D value=-858993460 result=40 00:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:00:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:00:27 Aux= 00:00:27 Message to Camera, serial 255700 queued 00:00:35 Received message from Master: op=Shutter serial=255710 00:00:35 Shutter LASER close 00:00:36 Received message from Master: op=PointingHead serial=255714 00:00:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:00:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:00:36 Point started: ret=0 00:00:36 point_skyscan result=0 00:00:37 Check angles 00:00:37 SkyScan query 00:00:38 SkyScan query done: ret=0 az=89.565<-5971 ze=156.795<-1547 Statuses=0009 0009 00:00:38 Msec=0 True Az=89.565 Ze=156.795 Az status=0009 Ze status=0009 00:00:38 Check angles 00:00:38 SkyScan query 00:00:38 SkyScan query done: ret=0 az=72.03<-4802 ze=135.9<-2940 Statuses=0009 0009 00:00:38 Msec=750 True Az=72.03 Ze=135.9 Az status=0009 Ze status=0009 00:00:39 Check angles 00:00:39 SkyScan query 00:00:39 SkyScan query done: ret=0 az=54.63<-3642 ze=114.945<-4337 Statuses=0009 0009 00:00:39 Msec=1500 True Az=54.63 Ze=114.945 Az status=0009 Ze status=0009 00:00:39 Check angles 00:00:39 SkyScan query 00:00:40 SkyScan query done: ret=0 az=41.01<-2734 ze=93.99<-5734 Statuses=0009 0009 00:00:40 Msec=2250 True Az=41.01 Ze=93.99 Az status=0009 Ze status=0009 00:00:40 Check angles 00:00:40 SkyScan query 00:00:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.035<-7131 Statuses=0008 0009 00:00:41 Msec=3000 True Az=40.995 Ze=73.035 Az status=0008 Ze status=0009 00:00:41 Check angles 00:00:41 SkyScan query 00:00:41 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 00:00:41 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 00:00:42 Check angles 00:00:42 SkyScan query 00:00:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:00:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:00:42 Message to Master queued w/err=0: serial=255714 error=0 00:00:47 Received message from Master: op=Filter serial=255715 00:00:47 Color wheel filter change from 0 to 0 00:00:47 FLIGetFilterPos err=0 currentPosition=0 00:00:47 FLIGetStepsRemaining err=0 RemainingSteps=0 00:00:47 Filter is already there-color wheel unchanged 00:00:47 Received message from Master: op=Shutter serial=255716 00:00:47 Shutter LASER close 00:00:47 Received message from Camera: op=State serial=255718 00:00:47 GetSingleValue result=40 Value=cccccccc 00:00:47 SkyScan query 00:00:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:00:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:48 Parameters OK 00:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:48 Set A/D data flow result=40 00:00:48 Set A/D channel type result=40 00:00:48 Set A/D encoding result=40 00:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:48 Set channel filter=0.000000e+000 result=40 00:00:48 Config A/D Result=40 00:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:48 Get A/D filter: -9.255963e+061 result=40 00:00:48 Get A/D value=-858993460 result=40 00:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:48 Parameters OK 00:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:48 Set A/D data flow result=40 00:00:48 Set A/D channel type result=40 00:00:48 Set A/D encoding result=40 00:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:48 Set channel filter=0.000000e+000 result=40 00:00:48 Config A/D Result=40 00:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:48 Get A/D filter: -9.255963e+061 result=40 00:00:48 Get A/D value=-858993460 result=40 00:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:00:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:00:48 Aux= 00:00:48 Message to Camera, serial 255718 queued 00:01:24 Received message from Master: op=PointingHead serial=255730 00:01:24 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:01:24 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:01:24 Point started: ret=0 00:01:24 point_skyscan result=0 00:01:25 Check angles 00:01:25 SkyScan query 00:01:26 SkyScan query done: ret=0 az=64.305<-4287 ze=66.555<-7563 Statuses=0009 0008 00:01:26 Msec=0 True Az=64.305 Ze=66.555 Az status=0009 Ze status=0008 00:01:26 Check angles 00:01:26 SkyScan query 00:01:26 SkyScan query done: ret=0 az=82.02<-5468 ze=66.495<-7567 Statuses=0009 0008 00:01:26 Msec=750 True Az=82.02 Ze=66.495 Az status=0009 Ze status=0008 00:01:27 Check angles 00:01:27 SkyScan query 00:01:27 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 00:01:27 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 00:01:27 Check angles 00:01:27 SkyScan query 00:01:28 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 00:01:28 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 00:01:28 Check angles 00:01:28 SkyScan query 00:01:29 SkyScan query done: ret=0 az=134.49<-8966 ze=66.495<-7567 Statuses=0009 0008 00:01:29 Msec=3000 True Az=134.49 Ze=66.495 Az status=0009 Ze status=0008 00:01:29 Check angles 00:01:29 SkyScan query 00:01:29 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 00:01:29 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 00:01:30 Check angles 00:01:30 SkyScan query 00:01:30 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:01:30 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:01:30 Message to Master queued w/err=0: serial=255730 error=0 00:01:35 Received message from Master: op=Filter serial=255731 00:01:35 Color wheel filter change from 0 to 0 00:01:35 FLIGetFilterPos err=0 currentPosition=0 00:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 00:01:35 Filter is already there-color wheel unchanged 00:01:35 Received message from Master: op=Shutter serial=255732 00:01:35 Shutter LASER close 00:01:35 Received message from Camera: op=State serial=255734 00:01:35 GetSingleValue result=40 Value=cccccccc 00:01:35 SkyScan query 00:01:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:36 Parameters OK 00:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:36 Set A/D data flow result=40 00:01:36 Set A/D channel type result=40 00:01:36 Set A/D encoding result=40 00:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:36 Set channel filter=0.000000e+000 result=40 00:01:36 Config A/D Result=40 00:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:36 Get A/D filter: -9.255963e+061 result=40 00:01:36 Get A/D value=-858993460 result=40 00:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:36 Parameters OK 00:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:36 Set A/D data flow result=40 00:01:36 Set A/D channel type result=40 00:01:36 Set A/D encoding result=40 00:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:36 Set channel filter=0.000000e+000 result=40 00:01:36 Config A/D Result=40 00:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:36 Get A/D filter: -9.255963e+061 result=40 00:01:36 Get A/D value=-858993460 result=40 00:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:36 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:01:36 Aux= 00:01:36 Message to Camera, serial 255734 queued 00:02:13 Received message from Master: op=PointingHead serial=255747 00:02:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:02:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:02:13 Point started: ret=0 00:02:13 point_skyscan result=0 00:02:14 Check angles 00:02:14 SkyScan query 00:02:14 SkyScan query done: ret=0 az=134.73<-8982 ze=36.345<-9577 Statuses=0009 0009 00:02:14 Msec=0 True Az=134.73 Ze=36.345 Az status=0009 Ze status=0009 00:02:15 Check angles 00:02:15 SkyScan query 00:02:15 SkyScan query done: ret=0 az=117.24<-7816 ze=15.465<-10969 Statuses=0009 0009 00:02:15 Msec=750 True Az=117.24 Ze=15.465 Az status=0009 Ze status=0009 00:02:15 Check angles 00:02:15 SkyScan query 00:02:16 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.55<-12370 Statuses=0009 0009 00:02:16 Msec=1500 True Az=99.825 Ze=-5.55 Az status=0009 Ze status=0009 00:02:16 Check angles 00:02:16 SkyScan query 00:02:17 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.85<-13790 Statuses=0009 0009 00:02:17 Msec=2250 True Az=82.035 Ze=-26.85 Az status=0009 Ze status=0009 00:02:17 Check angles 00:02:17 SkyScan query 00:02:17 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.58<-14572 Statuses=0009 0008 00:02:17 Msec=3000 True Az=64.44 Ze=-38.58 Az status=0009 Ze status=0008 00:02:18 Check angles 00:02:18 SkyScan query 00:02:18 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.52<-14568 Statuses=0009 0008 00:02:18 Msec=3750 True Az=47.07 Ze=-38.52 Az status=0009 Ze status=0008 00:02:18 Check angles 00:02:18 SkyScan query 00:02:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:02:19 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:02:19 Message to Master queued w/err=0: serial=255747 error=0 00:02:24 Received message from Master: op=Filter serial=255748 00:02:24 Color wheel filter change from 0 to 0 00:02:24 FLIGetFilterPos err=0 currentPosition=0 00:02:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:02:24 Filter is already there-color wheel unchanged 00:02:24 Received message from Master: op=Shutter serial=255749 00:02:24 Shutter LASER close 00:02:24 Received message from Camera: op=State serial=255751 00:02:24 GetSingleValue result=40 Value=cccccccc 00:02:24 SkyScan query 00:02:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:02:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:25 Parameters OK 00:02:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:25 Set A/D data flow result=40 00:02:25 Set A/D channel type result=40 00:02:25 Set A/D encoding result=40 00:02:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:25 Set channel filter=0.000000e+000 result=40 00:02:25 Config A/D Result=40 00:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:25 Get A/D filter: -9.255963e+061 result=40 00:02:25 Get A/D value=-858993460 result=40 00:02:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:25 Parameters OK 00:02:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:25 Set A/D data flow result=40 00:02:25 Set A/D channel type result=40 00:02:25 Set A/D encoding result=40 00:02:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:25 Set channel filter=0.000000e+000 result=40 00:02:25 Config A/D Result=40 00:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:25 Get A/D filter: -9.255963e+061 result=40 00:02:25 Get A/D value=-858993460 result=40 00:02:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:02:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:02:25 Aux= 00:02:25 Message to Camera, serial 255751 queued 00:03:02 Received message from Master: op=PointingHead serial=255764 00:03:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:03:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:03:02 Point started: ret=0 00:03:02 point_skyscan result=0 00:03:03 Check angles 00:03:03 SkyScan query 00:03:03 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.115<-16541 Statuses=0009 0009 00:03:03 Msec=0 True Az=63.87 Ze=-68.115 Az status=0009 Ze status=0009 00:03:03 Check angles 00:03:03 SkyScan query 00:03:04 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.085<-17939 Statuses=0009 0009 00:03:04 Msec=750 True Az=81.3 Ze=-89.085 Az status=0009 Ze status=0009 00:03:04 Check angles 00:03:04 SkyScan query 00:03:05 SkyScan query done: ret=0 az=98.775<-6585 ze=-110.025<-19335 Statuses=0009 0009 00:03:05 Msec=1500 True Az=98.775 Ze=-110.025 Az status=0009 Ze status=0009 00:03:05 Check angles 00:03:05 SkyScan query 00:03:06 SkyScan query done: ret=0 az=116.265<-7751 ze=-130.95<-20730 Statuses=0009 0009 00:03:06 Msec=2250 True Az=116.265 Ze=-130.95 Az status=0009 Ze status=0009 00:03:06 Check angles 00:03:06 SkyScan query 00:03:06 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.555<-21437 Statuses=0009 0008 00:03:06 Msec=3000 True Az=130.965 Ze=-141.555 Az status=0009 Ze status=0008 00:03:06 Check angles 00:03:06 SkyScan query 00:03:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 00:03:07 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 00:03:07 Message to Master queued w/err=0: serial=255764 error=0 00:03:12 Received message from Master: op=Filter serial=255765 00:03:12 Color wheel filter change from 0 to 0 00:03:12 FLIGetFilterPos err=0 currentPosition=0 00:03:12 FLIGetStepsRemaining err=0 RemainingSteps=0 00:03:12 Filter is already there-color wheel unchanged 00:03:12 Received message from Master: op=Shutter serial=255766 00:03:12 Shutter LASER close 00:03:12 Received message from Camera: op=State serial=255768 00:03:12 GetSingleValue result=40 Value=cccccccc 00:03:12 SkyScan query 00:03:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:03:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:13 Parameters OK 00:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:13 Set A/D data flow result=40 00:03:13 Set A/D channel type result=40 00:03:13 Set A/D encoding result=40 00:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:13 Set channel filter=0.000000e+000 result=40 00:03:13 Config A/D Result=40 00:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:13 Get A/D filter: -9.255963e+061 result=40 00:03:13 Get A/D value=-858993460 result=40 00:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:13 Parameters OK 00:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:13 Set A/D data flow result=40 00:03:13 Set A/D channel type result=40 00:03:13 Set A/D encoding result=40 00:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:13 Set channel filter=0.000000e+000 result=40 00:03:13 Config A/D Result=40 00:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:13 Get A/D filter: -9.255963e+061 result=40 00:03:13 Get A/D value=-858993460 result=40 00:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:03:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:03:13 Aux= 00:03:13 Message to Camera, serial 255768 queued 00:03:50 Received message from Master: op=PointingHead serial=255781 00:03:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:03:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:03:50 Point started: ret=0 00:03:50 point_skyscan result=0 00:03:51 Check angles 00:03:51 SkyScan query 00:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0009 0009 00:03:51 Msec=0 True Az=112.995 Ze=-170.985 Az status=0009 Ze status=0009 00:03:51 Check angles 00:03:51 SkyScan query 00:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:03:52 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:03:52 Message to Master queued w/err=0: serial=255781 error=0 00:03:57 Received message from Master: op=Filter serial=255782 00:03:57 Color wheel filter change from 0 to 0 00:03:57 FLIGetFilterPos err=0 currentPosition=0 00:03:57 FLIGetStepsRemaining err=0 RemainingSteps=0 00:03:57 Filter is already there-color wheel unchanged 00:03:57 Received message from Master: op=Shutter serial=255783 00:03:57 Shutter LASER open 00:03:57 Received message from Camera: op=State serial=255785 00:03:57 GetSingleValue result=40 Value=cccccccc 00:03:57 SkyScan query 00:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:03:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:58 Parameters OK 00:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:58 Set A/D data flow result=40 00:03:58 Set A/D channel type result=40 00:03:58 Set A/D encoding result=40 00:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:58 Set channel filter=0.000000e+000 result=40 00:03:58 Config A/D Result=40 00:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:58 Get A/D filter: -9.255963e+061 result=40 00:03:58 Get A/D value=-858993460 result=40 00:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:58 Parameters OK 00:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:58 Set A/D data flow result=40 00:03:58 Set A/D channel type result=40 00:03:58 Set A/D encoding result=40 00:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:58 Set channel filter=0.000000e+000 result=40 00:03:58 Config A/D Result=40 00:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:58 Get A/D filter: -9.255963e+061 result=40 00:03:58 Get A/D value=-858993460 result=40 00:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:03:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:03:58 Aux= 00:03:58 Message to Camera, serial 255785 queued 00:04:06 Received message from Master: op=Shutter serial=255795 00:04:06 Shutter LASER close 00:04:07 Received message from Master: op=PointingHead serial=255799 00:04:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:04:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:04:07 Point started: ret=0 00:04:07 point_skyscan result=0 00:04:08 Check angles 00:04:08 SkyScan query 00:04:09 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.1<-21540 Statuses=0009 0009 00:04:09 Msec=0 True Az=136.095 Ze=-143.1 Az status=0009 Ze status=0009 00:04:09 Check angles 00:04:09 SkyScan query 00:04:09 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.71<-20114 Statuses=0009 0009 00:04:09 Msec=750 True Az=153.885 Ze=-121.71 Az status=0009 Ze status=0009 00:04:10 Check angles 00:04:10 SkyScan query 00:04:10 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.725<-18715 Statuses=0009 0009 00:04:10 Msec=1500 True Az=171.36 Ze=-100.725 Az status=0009 Ze status=0009 00:04:10 Check angles 00:04:10 SkyScan query 00:04:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.845<-17323 Statuses=0008 0009 00:04:11 Msec=2250 True Az=176.01 Ze=-79.845 Az status=0008 Ze status=0009 00:04:11 Check angles 00:04:11 SkyScan query 00:04:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.335<-15889 Statuses=0008 0009 00:04:12 Msec=3000 True Az=176.01 Ze=-58.335 Az status=0008 Ze status=0009 00:04:12 Check angles 00:04:12 SkyScan query 00:04:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:04:12 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:04:12 Message to Master queued w/err=0: serial=255799 error=0 00:04:17 Received message from Master: op=Filter serial=255800 00:04:17 Color wheel filter change from 0 to 0 00:04:17 FLIGetFilterPos err=0 currentPosition=0 00:04:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:04:17 Filter is already there-color wheel unchanged 00:04:18 Received message from Master: op=Shutter serial=255801 00:04:18 Shutter LASER close 00:04:18 Received message from Camera: op=State serial=255803 00:04:18 GetSingleValue result=40 Value=cccccccc 00:04:18 SkyScan query 00:04:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:04:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:18 Parameters OK 00:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:18 Set A/D data flow result=40 00:04:18 Set A/D channel type result=40 00:04:18 Set A/D encoding result=40 00:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:18 Set channel filter=0.000000e+000 result=40 00:04:18 Config A/D Result=40 00:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:18 Get A/D filter: -9.255963e+061 result=40 00:04:18 Get A/D value=-858993460 result=40 00:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:18 Parameters OK 00:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:18 Set A/D data flow result=40 00:04:18 Set A/D channel type result=40 00:04:18 Set A/D encoding result=40 00:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:18 Set channel filter=0.000000e+000 result=40 00:04:18 Config A/D Result=40 00:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:18 Get A/D filter: -9.255963e+061 result=40 00:04:18 Get A/D value=-858993460 result=40 00:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:04:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:04:18 Aux= 00:04:18 Message to Camera, serial 255803 queued 00:04:55 Received message from Master: op=PointingHead serial=255816 00:04:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:04:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:04:56 Point started: ret=0 00:04:56 point_skyscan result=0 00:04:56 Check angles 00:04:56 SkyScan query 00:04:57 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.035<-13469 Statuses=0009 0009 00:04:57 Msec=0 True Az=153.195 Ze=-22.035 Az status=0009 Ze status=0009 00:04:57 Check angles 00:04:57 SkyScan query 00:04:58 SkyScan query done: ret=0 az=135.75<-9050 ze=-0.99<-12066 Statuses=0009 0009 00:04:58 Msec=750 True Az=135.75 Ze=-0.99 Az status=0009 Ze status=0009 00:04:58 Check angles 00:04:58 SkyScan query 00:04:58 SkyScan query done: ret=0 az=118.23<-7882 ze=19.92<-10672 Statuses=0009 0009 00:04:58 Msec=1500 True Az=118.23 Ze=19.92 Az status=0009 Ze status=0009 00:04:59 Check angles 00:04:59 SkyScan query 00:04:59 SkyScan query done: ret=0 az=100.815<-6721 ze=40.875<-9275 Statuses=0009 0009 00:04:59 Msec=2250 True Az=100.815 Ze=40.875 Az status=0009 Ze status=0009 00:04:59 Check angles 00:04:59 SkyScan query 00:05:00 SkyScan query done: ret=0 az=85.965<-5731 ze=51.555<-8563 Statuses=0009 0008 00:05:00 Msec=3000 True Az=85.965 Ze=51.555 Az status=0009 Ze status=0008 00:05:00 Check angles 00:05:00 SkyScan query 00:05:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:05:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:05:01 Message to Master queued w/err=0: serial=255816 error=0 00:05:06 Received message from Master: op=Filter serial=255817 00:05:06 Color wheel filter change from 0 to 0 00:05:06 FLIGetFilterPos err=0 currentPosition=0 00:05:06 FLIGetStepsRemaining err=0 RemainingSteps=0 00:05:06 Filter is already there-color wheel unchanged 00:05:06 Received message from Master: op=Shutter serial=255818 00:05:06 Shutter LASER close 00:05:06 Received message from Camera: op=State serial=255820 00:05:06 GetSingleValue result=40 Value=cccccccc 00:05:06 SkyScan query 00:05:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:05:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:06 Parameters OK 00:05:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:06 Set A/D data flow result=40 00:05:06 Set A/D channel type result=40 00:05:06 Set A/D encoding result=40 00:05:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:06 Set channel filter=0.000000e+000 result=40 00:05:06 Config A/D Result=40 00:05:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:06 Get A/D filter: -9.255963e+061 result=40 00:05:06 Get A/D value=-858993460 result=40 00:05:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:06 Parameters OK 00:05:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:06 Set A/D data flow result=40 00:05:06 Set A/D channel type result=40 00:05:06 Set A/D encoding result=40 00:05:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:06 Set channel filter=0.000000e+000 result=40 00:05:06 Config A/D Result=40 00:05:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:06 Get A/D filter: -9.255963e+061 result=40 00:05:06 Get A/D value=-858993460 result=40 00:05:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:05:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:05:06 Aux= 00:05:06 Message to Camera, serial 255820 queued 00:05:43 Received message from Master: op=PointingHead serial=255833 00:05:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:05:43 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:05:44 Point started: ret=0 00:05:44 point_skyscan result=0 00:05:44 Check angles 00:05:44 SkyScan query 00:05:45 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 00:05:45 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 00:05:45 Check angles 00:05:45 SkyScan query 00:05:46 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 00:05:46 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 00:05:46 Check angles 00:05:46 SkyScan query 00:05:46 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 00:05:46 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 00:05:47 Check angles 00:05:47 SkyScan query 00:05:47 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 00:05:47 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 00:05:47 Check angles 00:05:47 SkyScan query 00:05:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:05:48 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:05:48 Check angles 00:05:48 SkyScan query 00:05:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:05:49 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 00:05:49 Message to Master queued w/err=0: serial=255833 error=0 00:05:54 Received message from Master: op=Filter serial=255834 00:05:54 Color wheel filter change from 0 to 0 00:05:54 FLIGetFilterPos err=0 currentPosition=0 00:05:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:05:54 Filter is already there-color wheel unchanged 00:05:54 Received message from Master: op=Shutter serial=255835 00:05:54 Shutter LASER close 00:05:54 Received message from Camera: op=State serial=255837 00:05:54 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-19 00:05:54] 00:05:54 SkyScan query 00:05:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:05:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:55 Parameters OK 00:05:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:55 Set A/D data flow result=40 00:05:55 Set A/D channel type result=40 00:05:55 Set A/D encoding result=40 00:05:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:55 Set channel filter=0.000000e+000 result=40 00:05:55 Config A/D Result=40 00:05:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:55 Get A/D filter: -9.255963e+061 result=40 00:05:55 Get A/D value=-858993460 result=40 00:05:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:55 Parameters OK 00:05:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:55 Set A/D data flow result=40 00:05:55 Set A/D channel type result=40 00:05:55 Set A/D encoding result=40 00:05:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:55 Set channel filter=0.000000e+000 result=40 00:05:55 Config A/D Result=40 00:05:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:55 Get A/D filter: -9.255963e+061 result=40 00:05:55 Get A/D value=-858993460 result=40 00:05:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:05:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:05:55 Aux= 00:05:55 Message to Camera, serial 255837 queued 00:06:31 Received message from Master: op=PointingHead serial=255850 00:06:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:06:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:06:32 Point started: ret=0 00:06:32 point_skyscan result=0 00:06:33 Check angles 00:06:33 SkyScan query 00:06:33 SkyScan query done: ret=0 az=153.06<-10204 ze=8.7<-11420 Statuses=0009 0009 00:06:33 Msec=0 True Az=153.06 Ze=8.7 Az status=0009 Ze status=0009 00:06:33 Check angles 00:06:33 SkyScan query 00:06:34 SkyScan query done: ret=0 az=135.225<-9015 ze=-12.6<-12840 Statuses=0009 0009 00:06:34 Msec=750 True Az=135.225 Ze=-12.6 Az status=0009 Ze status=0009 00:06:34 Check angles 00:06:34 SkyScan query 00:06:35 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.615<-14241 Statuses=0009 0009 00:06:35 Msec=1500 True Az=117.615 Ze=-33.615 Az status=0009 Ze status=0009 00:06:35 Check angles 00:06:35 SkyScan query 00:06:35 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.57<-15438 Statuses=0009 0009 00:06:35 Msec=2250 True Az=100.365 Ze=-51.57 Az status=0009 Ze status=0009 00:06:36 Check angles 00:06:36 SkyScan query 00:06:36 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:06:36 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:06:36 Check angles 00:06:36 SkyScan query 00:06:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:06:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:06:37 Message to Master queued w/err=0: serial=255850 error=0 00:06:42 Received message from Master: op=Filter serial=255851 00:06:42 Color wheel filter change from 0 to 0 00:06:42 FLIGetFilterPos err=0 currentPosition=0 00:06:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:06:42 Filter is already there-color wheel unchanged 00:06:42 Received message from Master: op=Shutter serial=255852 00:06:42 Shutter LASER close 00:06:42 Received message from Camera: op=State serial=255854 00:06:42 GetSingleValue result=40 Value=cccccccc 00:06:42 SkyScan query 00:06:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:06:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:43 Parameters OK 00:06:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:43 Set A/D data flow result=40 00:06:43 Set A/D channel type result=40 00:06:43 Set A/D encoding result=40 00:06:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:43 Set channel filter=0.000000e+000 result=40 00:06:43 Config A/D Result=40 00:06:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:43 Get A/D filter: -9.255963e+061 result=40 00:06:43 Get A/D value=-858993460 result=40 00:06:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:43 Parameters OK 00:06:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:43 Set A/D data flow result=40 00:06:43 Set A/D channel type result=40 00:06:43 Set A/D encoding result=40 00:06:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:43 Set channel filter=0.000000e+000 result=40 00:06:43 Config A/D Result=40 00:06:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:43 Get A/D filter: -9.255963e+061 result=40 00:06:43 Get A/D value=-858993460 result=40 00:06:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:06:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:06:43 Aux= 00:06:43 Message to Camera, serial 255854 queued 00:07:20 Received message from Master: op=PointingHead serial=255867 00:07:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:07:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:07:20 Point started: ret=0 00:07:20 point_skyscan result=0 00:07:21 Check angles 00:07:21 SkyScan query 00:07:21 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.375<-17425 Statuses=0009 0009 00:07:21 Msec=0 True Az=109.185 Ze=-81.375 Az status=0009 Ze status=0009 00:07:21 Check angles 00:07:21 SkyScan query 00:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 00:07:22 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 00:07:22 Check angles 00:07:22 SkyScan query 00:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 00:07:23 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 00:07:23 Check angles 00:07:23 SkyScan query 00:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 00:07:23 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 00:07:24 Check angles 00:07:24 SkyScan query 00:07:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 00:07:24 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 00:07:24 Check angles 00:07:24 SkyScan query 00:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:07:25 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:07:25 Message to Master queued w/err=0: serial=255867 error=0 00:07:30 Received message from Master: op=Filter serial=255868 00:07:30 Color wheel filter change from 0 to 0 00:07:30 FLIGetFilterPos err=0 currentPosition=0 00:07:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:07:30 Filter is already there-color wheel unchanged 00:07:30 Received message from Master: op=Shutter serial=255869 00:07:30 Shutter LASER open 00:07:30 Received message from Camera: op=State serial=255871 00:07:30 GetSingleValue result=40 Value=cccccccc 00:07:30 SkyScan query 00:07:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:07:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:31 Parameters OK 00:07:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:31 Set A/D data flow result=40 00:07:31 Set A/D channel type result=40 00:07:31 Set A/D encoding result=40 00:07:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:31 Set channel filter=0.000000e+000 result=40 00:07:31 Config A/D Result=40 00:07:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:31 Get A/D filter: -9.255963e+061 result=40 00:07:31 Get A/D value=-858993460 result=40 00:07:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:31 Parameters OK 00:07:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:31 Set A/D data flow result=40 00:07:31 Set A/D channel type result=40 00:07:31 Set A/D encoding result=40 00:07:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:31 Set channel filter=0.000000e+000 result=40 00:07:31 Config A/D Result=40 00:07:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:31 Get A/D filter: -9.255963e+061 result=40 00:07:31 Get A/D value=-858993460 result=40 00:07:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:07:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:07:31 Aux= 00:07:31 Message to Camera, serial 255871 queued 00:07:39 Received message from Master: op=Shutter serial=255881 00:07:39 Shutter LASER close 00:07:40 Received message from Master: op=PointingHead serial=255885 00:07:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:07:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:07:40 Point started: ret=0 00:07:40 point_skyscan result=0 00:07:41 Check angles 00:07:41 SkyScan query 00:07:41 SkyScan query done: ret=0 az=89.805<-5987 ze=157.095<-1527 Statuses=0009 0009 00:07:41 Msec=0 True Az=89.805 Ze=157.095 Az status=0009 Ze status=0009 00:07:42 Check angles 00:07:42 SkyScan query 00:07:42 SkyScan query done: ret=0 az=72.285<-4819 ze=136.125<-2925 Statuses=0009 0009 00:07:42 Msec=750 True Az=72.285 Ze=136.125 Az status=0009 Ze status=0009 00:07:42 Check angles 00:07:42 SkyScan query 00:07:43 SkyScan query done: ret=0 az=54.81<-3654 ze=115.23<-4318 Statuses=0009 0009 00:07:43 Msec=1500 True Az=54.81 Ze=115.23 Az status=0009 Ze status=0009 00:07:43 Check angles 00:07:43 SkyScan query 00:07:44 SkyScan query done: ret=0 az=41.01<-2734 ze=94.185<-5721 Statuses=0009 0009 00:07:44 Msec=2250 True Az=41.01 Ze=94.185 Az status=0009 Ze status=0009 00:07:44 Check angles 00:07:44 SkyScan query 00:07:44 SkyScan query done: ret=0 az=40.995<-2733 ze=73.305<-7113 Statuses=0008 0009 00:07:44 Msec=3000 True Az=40.995 Ze=73.305 Az status=0008 Ze status=0009 00:07:45 Check angles 00:07:45 SkyScan query 00:07:45 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 00:07:45 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 00:07:45 Check angles 00:07:45 SkyScan query 00:07:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:07:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:07:46 Message to Master queued w/err=0: serial=255885 error=0 00:07:51 Received message from Master: op=Filter serial=255886 00:07:51 Color wheel filter change from 0 to 0 00:07:51 FLIGetFilterPos err=0 currentPosition=0 00:07:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:07:51 Filter is already there-color wheel unchanged 00:07:51 Received message from Master: op=Shutter serial=255887 00:07:51 Shutter LASER close 00:07:51 Received message from Camera: op=State serial=255889 00:07:51 GetSingleValue result=40 Value=cccccccc 00:07:51 SkyScan query 00:07:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:07:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:52 Parameters OK 00:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:52 Set A/D data flow result=40 00:07:52 Set A/D channel type result=40 00:07:52 Set A/D encoding result=40 00:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:52 Set channel filter=0.000000e+000 result=40 00:07:52 Config A/D Result=40 00:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:52 Get A/D filter: -9.255963e+061 result=40 00:07:52 Get A/D value=-858993460 result=40 00:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:52 Parameters OK 00:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:52 Set A/D data flow result=40 00:07:52 Set A/D channel type result=40 00:07:52 Set A/D encoding result=40 00:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:52 Set channel filter=0.000000e+000 result=40 00:07:52 Config A/D Result=40 00:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:52 Get A/D filter: -9.255963e+061 result=40 00:07:52 Get A/D value=-858993460 result=40 00:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:07:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:07:52 Aux= 00:07:52 Message to Camera, serial 255889 queued 00:08:29 Received message from Master: op=PointingHead serial=255902 00:08:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:08:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:08:29 Point started: ret=0 00:08:29 point_skyscan result=0 00:08:30 Check angles 00:08:30 SkyScan query 00:08:30 SkyScan query done: ret=0 az=64.095<-4273 ze=66.555<-7563 Statuses=0009 0008 00:08:30 Msec=0 True Az=64.095 Ze=66.555 Az status=0009 Ze status=0008 00:08:31 Check angles 00:08:31 SkyScan query 00:08:31 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 00:08:31 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 00:08:31 Check angles 00:08:31 SkyScan query 00:08:32 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 00:08:32 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 00:08:32 Check angles 00:08:32 SkyScan query 00:08:33 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 00:08:33 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 00:08:33 Check angles 00:08:33 SkyScan query 00:08:33 SkyScan query done: ret=0 az=134.28<-8952 ze=66.495<-7567 Statuses=0009 0008 00:08:33 Msec=3000 True Az=134.28 Ze=66.495 Az status=0009 Ze status=0008 00:08:34 Check angles 00:08:34 SkyScan query 00:08:34 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 00:08:34 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 00:08:34 Check angles 00:08:34 SkyScan query 00:08:35 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:08:35 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:08:35 Message to Master queued w/err=0: serial=255902 error=0 00:08:40 Received message from Master: op=Filter serial=255903 00:08:40 Color wheel filter change from 0 to 0 00:08:40 FLIGetFilterPos err=0 currentPosition=0 00:08:40 FLIGetStepsRemaining err=0 RemainingSteps=0 00:08:40 Filter is already there-color wheel unchanged 00:08:40 Received message from Master: op=Shutter serial=255904 00:08:40 Shutter LASER close 00:08:40 Received message from Camera: op=State serial=255906 00:08:40 GetSingleValue result=40 Value=cccccccc 00:08:40 SkyScan query 00:08:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:08:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:41 Parameters OK 00:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:41 Set A/D data flow result=40 00:08:41 Set A/D channel type result=40 00:08:41 Set A/D encoding result=40 00:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:41 Set channel filter=0.000000e+000 result=40 00:08:41 Config A/D Result=40 00:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:41 Get A/D filter: -9.255963e+061 result=40 00:08:41 Get A/D value=-858993460 result=40 00:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:41 Parameters OK 00:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:41 Set A/D data flow result=40 00:08:41 Set A/D channel type result=40 00:08:41 Set A/D encoding result=40 00:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:41 Set channel filter=0.000000e+000 result=40 00:08:41 Config A/D Result=40 00:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:41 Get A/D filter: -9.255963e+061 result=40 00:08:41 Get A/D value=-858993460 result=40 00:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:08:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:08:41 Aux= 00:08:41 Message to Camera, serial 255906 queued 00:09:18 Received message from Master: op=PointingHead serial=255919 00:09:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:09:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:09:18 Point started: ret=0 00:09:18 point_skyscan result=0 00:09:19 Check angles 00:09:19 SkyScan query 00:09:19 SkyScan query done: ret=0 az=135.165<-9011 ze=36.84<-9544 Statuses=0009 0009 00:09:19 Msec=0 True Az=135.165 Ze=36.84 Az status=0009 Ze status=0009 00:09:19 Check angles 00:09:19 SkyScan query 00:09:20 SkyScan query done: ret=0 az=117.705<-7847 ze=15.93<-10938 Statuses=0009 0009 00:09:20 Msec=750 True Az=117.705 Ze=15.93 Az status=0009 Ze status=0009 00:09:20 Check angles 00:09:20 SkyScan query 00:09:21 SkyScan query done: ret=0 az=100.275<-6685 ze=-5.085<-12339 Statuses=0009 0009 00:09:21 Msec=1500 True Az=100.275 Ze=-5.085 Az status=0009 Ze status=0009 00:09:21 Check angles 00:09:21 SkyScan query 00:09:21 SkyScan query done: ret=0 az=82.77<-5518 ze=-25.995<-13733 Statuses=0009 0009 00:09:21 Msec=2250 True Az=82.77 Ze=-25.995 Az status=0009 Ze status=0009 00:09:22 Check angles 00:09:22 SkyScan query 00:09:22 SkyScan query done: ret=0 az=65.295<-4353 ze=-38.565<-14571 Statuses=0009 0008 00:09:22 Msec=3000 True Az=65.295 Ze=-38.565 Az status=0009 Ze status=0008 00:09:22 Check angles 00:09:22 SkyScan query 00:09:23 SkyScan query done: ret=0 az=47.43<-3162 ze=-38.535<-14569 Statuses=0009 0008 00:09:23 Msec=3750 True Az=47.43 Ze=-38.535 Az status=0009 Ze status=0008 00:09:23 Check angles 00:09:23 SkyScan query 00:09:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:09:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:09:24 Message to Master queued w/err=0: serial=255919 error=0 00:09:29 Received message from Master: op=Filter serial=255920 00:09:29 Color wheel filter change from 0 to 0 00:09:29 FLIGetFilterPos err=0 currentPosition=0 00:09:29 FLIGetStepsRemaining err=0 RemainingSteps=0 00:09:29 Filter is already there-color wheel unchanged 00:09:29 Received message from Master: op=Shutter serial=255921 00:09:29 Shutter LASER close 00:09:29 Received message from Camera: op=State serial=255923 00:09:29 GetSingleValue result=40 Value=cccccccc 00:09:29 SkyScan query 00:09:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:09:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:29 Parameters OK 00:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:29 Set A/D data flow result=40 00:09:29 Set A/D channel type result=40 00:09:29 Set A/D encoding result=40 00:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:29 Set channel filter=0.000000e+000 result=40 00:09:29 Config A/D Result=40 00:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:29 Get A/D filter: -9.255963e+061 result=40 00:09:29 Get A/D value=-858993460 result=40 00:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:29 Parameters OK 00:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:29 Set A/D data flow result=40 00:09:29 Set A/D channel type result=40 00:09:29 Set A/D encoding result=40 00:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:29 Set channel filter=0.000000e+000 result=40 00:09:29 Config A/D Result=40 00:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:29 Get A/D filter: -9.255963e+061 result=40 00:09:29 Get A/D value=-858993460 result=40 00:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:09:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:09:29 Aux= 00:09:29 Message to Camera, serial 255923 queued 00:10:05 Received message from Master: op=PointingHead serial=255935 00:10:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:10:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:10:06 Point started: ret=0 00:10:06 point_skyscan result=0 00:10:06 Check angles 00:10:06 SkyScan query 00:10:07 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.265<-16551 Statuses=0009 0009 00:10:07 Msec=0 True Az=63.99 Ze=-68.265 Az status=0009 Ze status=0009 00:10:07 Check angles 00:10:07 SkyScan query 00:10:08 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.25<-17950 Statuses=0009 0009 00:10:08 Msec=750 True Az=81.375 Ze=-89.25 Az status=0009 Ze status=0009 00:10:08 Check angles 00:10:08 SkyScan query 00:10:09 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.79<-19386 Statuses=0009 0009 00:10:09 Msec=1500 True Az=99.33 Ze=-110.79 Az status=0009 Ze status=0009 00:10:09 Check angles 00:10:09 SkyScan query 00:10:09 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.61<-20774 Statuses=0009 0009 00:10:09 Msec=2250 True Az=116.76 Ze=-131.61 Az status=0009 Ze status=0009 00:10:09 Check angles 00:10:09 SkyScan query 00:10:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 00:10:10 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 00:10:10 Check angles 00:10:10 SkyScan query 00:10:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 00:10:11 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 00:10:11 Message to Master queued w/err=0: serial=255935 error=0 00:10:16 Received message from Master: op=Filter serial=255936 00:10:16 Color wheel filter change from 0 to 0 00:10:16 FLIGetFilterPos err=0 currentPosition=0 00:10:16 FLIGetStepsRemaining err=0 RemainingSteps=0 00:10:16 Filter is already there-color wheel unchanged 00:10:16 Received message from Master: op=Shutter serial=255937 00:10:16 Shutter LASER close 00:10:16 Received message from Camera: op=State serial=255939 00:10:16 GetSingleValue result=40 Value=cccccccc 00:10:16 SkyScan query 00:10:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:10:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:17 Parameters OK 00:10:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:17 Set A/D data flow result=40 00:10:17 Set A/D channel type result=40 00:10:17 Set A/D encoding result=40 00:10:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:17 Set channel filter=0.000000e+000 result=40 00:10:17 Config A/D Result=40 00:10:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:17 Get A/D filter: -9.255963e+061 result=40 00:10:17 Get A/D value=-858993460 result=40 00:10:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:17 Parameters OK 00:10:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:17 Set A/D data flow result=40 00:10:17 Set A/D channel type result=40 00:10:17 Set A/D encoding result=40 00:10:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:17 Set channel filter=0.000000e+000 result=40 00:10:17 Config A/D Result=40 00:10:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:17 Get A/D filter: -9.255963e+061 result=40 00:10:17 Get A/D value=-858993460 result=40 00:10:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:10:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:10:17 Aux= 00:10:17 Message to Camera, serial 255939 queued 00:10:54 Received message from Master: op=PointingHead serial=255952 00:10:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:10:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:10:54 Point started: ret=0 00:10:54 point_skyscan result=0 00:10:55 Check angles 00:10:55 SkyScan query 00:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0009 0009 00:10:55 Msec=0 True Az=112.995 Ze=-171.075 Az status=0009 Ze status=0009 00:10:55 Check angles 00:10:55 SkyScan query 00:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:10:56 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:10:56 Message to Master queued w/err=0: serial=255952 error=0 00:11:01 Received message from Master: op=Filter serial=255953 00:11:01 Color wheel filter change from 0 to 0 00:11:01 FLIGetFilterPos err=0 currentPosition=0 00:11:01 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:01 Filter is already there-color wheel unchanged 00:11:01 Received message from Master: op=Shutter serial=255954 00:11:01 Shutter LASER open 00:11:01 Received message from Camera: op=State serial=255956 00:11:01 GetSingleValue result=40 Value=cccccccc 00:11:01 SkyScan query 00:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:11:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:02 Parameters OK 00:11:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:02 Set A/D data flow result=40 00:11:02 Set A/D channel type result=40 00:11:02 Set A/D encoding result=40 00:11:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:02 Set channel filter=0.000000e+000 result=40 00:11:02 Config A/D Result=40 00:11:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:02 Get A/D filter: -9.255963e+061 result=40 00:11:02 Get A/D value=-858993460 result=40 00:11:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:02 Parameters OK 00:11:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:02 Set A/D data flow result=40 00:11:02 Set A/D channel type result=40 00:11:02 Set A/D encoding result=40 00:11:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:02 Set channel filter=0.000000e+000 result=40 00:11:02 Config A/D Result=40 00:11:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:02 Get A/D filter: -9.255963e+061 result=40 00:11:02 Get A/D value=-858993460 result=40 00:11:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:02 Aux= 00:11:02 Message to Camera, serial 255956 queued 00:11:10 Received message from Master: op=Shutter serial=255966 00:11:10 Shutter LASER close 00:11:11 Received message from Master: op=PointingHead serial=255970 00:11:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:11:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:11:11 Point started: ret=0 00:11:11 point_skyscan result=0 00:11:12 Check angles 00:11:12 SkyScan query 00:11:13 SkyScan query done: ret=0 az=136.275<-9085 ze=-142.86<-21524 Statuses=0009 0009 00:11:13 Msec=0 True Az=136.275 Ze=-142.86 Az status=0009 Ze status=0009 00:11:13 Check angles 00:11:13 SkyScan query 00:11:13 SkyScan query done: ret=0 az=153.72<-10248 ze=-121.905<-20127 Statuses=0009 0009 00:11:13 Msec=750 True Az=153.72 Ze=-121.905 Az status=0009 Ze status=0009 00:11:14 Check angles 00:11:14 SkyScan query 00:11:14 SkyScan query done: ret=0 az=171.3<-11420 ze=-101.025<-18735 Statuses=0009 0009 00:11:14 Msec=1500 True Az=171.3 Ze=-101.025 Az status=0009 Ze status=0009 00:11:14 Check angles 00:11:14 SkyScan query 00:11:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.07<-17338 Statuses=0008 0009 00:11:15 Msec=2250 True Az=176.01 Ze=-80.07 Az status=0008 Ze status=0009 00:11:15 Check angles 00:11:15 SkyScan query 00:11:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.145<-15943 Statuses=0008 0009 00:11:16 Msec=3000 True Az=175.995 Ze=-59.145 Az status=0008 Ze status=0009 00:11:16 Check angles 00:11:16 SkyScan query 00:11:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:11:16 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:11:16 Message to Master queued w/err=0: serial=255970 error=0 00:11:21 Received message from Master: op=Filter serial=255971 00:11:21 Color wheel filter change from 0 to 0 00:11:21 FLIGetFilterPos err=0 currentPosition=0 00:11:21 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:21 Filter is already there-color wheel unchanged 00:11:22 Received message from Master: op=Shutter serial=255972 00:11:22 Shutter LASER close 00:11:22 Received message from Camera: op=State serial=255974 00:11:22 GetSingleValue result=40 Value=cccccccc 00:11:22 SkyScan query 00:11:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:11:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:22 Parameters OK 00:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:22 Set A/D data flow result=40 00:11:22 Set A/D channel type result=40 00:11:22 Set A/D encoding result=40 00:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:22 Set channel filter=0.000000e+000 result=40 00:11:22 Config A/D Result=40 00:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:22 Get A/D filter: -9.255963e+061 result=40 00:11:22 Get A/D value=-858993460 result=40 00:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:22 Parameters OK 00:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:22 Set A/D data flow result=40 00:11:22 Set A/D channel type result=40 00:11:22 Set A/D encoding result=40 00:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:22 Set channel filter=0.000000e+000 result=40 00:11:22 Config A/D Result=40 00:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:22 Get A/D filter: -9.255963e+061 result=40 00:11:22 Get A/D value=-858993460 result=40 00:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:22 Aux= 00:11:22 Message to Camera, serial 255974 queued 00:11:59 Received message from Master: op=PointingHead serial=255987 00:11:59 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:11:59 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:11:59 Point started: ret=0 00:11:59 point_skyscan result=0 00:12:00 Check angles 00:12:00 SkyScan query 00:12:01 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.63<-13442 Statuses=0009 0009 00:12:01 Msec=0 True Az=152.91 Ze=-21.63 Az status=0009 Ze status=0009 00:12:01 Check angles 00:12:01 SkyScan query 00:12:02 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.555<-12037 Statuses=0009 0009 00:12:02 Msec=750 True Az=135.375 Ze=-0.555 Az status=0009 Ze status=0009 00:12:02 Check angles 00:12:02 SkyScan query 00:12:02 SkyScan query done: ret=0 az=117.825<-7855 ze=20.28<-10648 Statuses=0009 0009 00:12:02 Msec=1500 True Az=117.825 Ze=20.28 Az status=0009 Ze status=0009 00:12:02 Check angles 00:12:02 SkyScan query 00:12:03 SkyScan query done: ret=0 az=100.5<-6700 ze=41.34<-9244 Statuses=0009 0009 00:12:03 Msec=2250 True Az=100.5 Ze=41.34 Az status=0009 Ze status=0009 00:12:03 Check angles 00:12:03 SkyScan query 00:12:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 00:12:04 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 00:12:04 Check angles 00:12:04 SkyScan query 00:12:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:12:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:12:05 Message to Master queued w/err=0: serial=255987 error=0 00:12:10 Received message from Master: op=Filter serial=255988 00:12:10 Color wheel filter change from 0 to 0 00:12:10 FLIGetFilterPos err=0 currentPosition=0 00:12:10 FLIGetStepsRemaining err=0 RemainingSteps=0 00:12:10 Filter is already there-color wheel unchanged 00:12:10 Received message from Master: op=Shutter serial=255989 00:12:10 Shutter LASER close 00:12:10 Received message from Camera: op=State serial=255991 00:12:10 GetSingleValue result=40 Value=cccccccc 00:12:10 SkyScan query 00:12:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:12:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:10 Parameters OK 00:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:10 Set A/D data flow result=40 00:12:10 Set A/D channel type result=40 00:12:10 Set A/D encoding result=40 00:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:10 Set channel filter=0.000000e+000 result=40 00:12:10 Config A/D Result=40 00:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:10 Get A/D filter: -9.255963e+061 result=40 00:12:10 Get A/D value=-858993460 result=40 00:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:10 Parameters OK 00:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:10 Set A/D data flow result=40 00:12:10 Set A/D channel type result=40 00:12:10 Set A/D encoding result=40 00:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:10 Set channel filter=0.000000e+000 result=40 00:12:10 Config A/D Result=40 00:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:10 Get A/D filter: -9.255963e+061 result=40 00:12:10 Get A/D value=-858993460 result=40 00:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:12:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:12:10 Aux= 00:12:10 Message to Camera, serial 255991 queued 00:12:47 Received message from Master: op=PointingHead serial=256004 00:12:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:12:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:12:47 Point started: ret=0 00:12:47 point_skyscan result=0 00:12:48 Check angles 00:12:48 SkyScan query 00:12:49 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 00:12:49 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 00:12:49 Check angles 00:12:49 SkyScan query 00:12:50 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 00:12:50 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 00:12:50 Check angles 00:12:50 SkyScan query 00:12:50 SkyScan query done: ret=0 az=144.09<-9606 ze=38.505<-9433 Statuses=0009 0008 00:12:50 Msec=1500 True Az=144.09 Ze=38.505 Az status=0009 Ze status=0008 00:12:50 Check angles 00:12:50 SkyScan query 00:12:51 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 00:12:51 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 00:12:51 Check angles 00:12:51 SkyScan query 00:12:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:12:52 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:12:52 Check angles 00:12:52 SkyScan query 00:12:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:12:53 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 00:12:53 Message to Master queued w/err=0: serial=256004 error=0 00:12:58 Received message from Master: op=Filter serial=256005 00:12:58 Color wheel filter change from 0 to 0 00:12:58 FLIGetFilterPos err=0 currentPosition=0 00:12:58 FLIGetStepsRemaining err=0 RemainingSteps=0 00:12:58 Filter is already there-color wheel unchanged 00:12:58 Received message from Master: op=Shutter serial=256006 00:12:58 Shutter LASER close 00:12:58 Received message from Camera: op=State serial=256008 00:12:58 GetSingleValue result=40 Value=cccccccc 00:12:58 SkyScan query 00:12:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:12:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:58 Parameters OK 00:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:58 Set A/D data flow result=40 00:12:58 Set A/D channel type result=40 00:12:58 Set A/D encoding result=40 00:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:58 Set channel filter=0.000000e+000 result=40 00:12:58 Config A/D Result=40 00:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:58 Get A/D filter: -9.255963e+061 result=40 00:12:58 Get A/D value=-858993460 result=40 00:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:58 Parameters OK 00:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:58 Set A/D data flow result=40 00:12:58 Set A/D channel type result=40 00:12:58 Set A/D encoding result=40 00:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:58 Set channel filter=0.000000e+000 result=40 00:12:58 Config A/D Result=40 00:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:58 Get A/D filter: -9.255963e+061 result=40 00:12:58 Get A/D value=-858993460 result=40 00:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:12:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:12:58 Aux= 00:12:58 Message to Camera, serial 256008 queued 00:13:35 Received message from Master: op=PointingHead serial=256021 00:13:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:13:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:13:36 Point started: ret=0 00:13:36 point_skyscan result=0 00:13:36 Check angles 00:13:36 SkyScan query 00:13:37 SkyScan query done: ret=0 az=153.15<-10210 ze=8.91<-11406 Statuses=0009 0009 00:13:37 Msec=0 True Az=153.15 Ze=8.91 Az status=0009 Ze status=0009 00:13:37 Check angles 00:13:37 SkyScan query 00:13:38 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.42<-12828 Statuses=0009 0009 00:13:38 Msec=750 True Az=135.3 Ze=-12.42 Az status=0009 Ze status=0009 00:13:38 Check angles 00:13:38 SkyScan query 00:13:38 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.45<-14230 Statuses=0009 0009 00:13:38 Msec=1500 True Az=117.825 Ze=-33.45 Az status=0009 Ze status=0009 00:13:39 Check angles 00:13:39 SkyScan query 00:13:39 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 00:13:39 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 00:13:39 Check angles 00:13:39 SkyScan query 00:13:40 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:13:40 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:13:40 Check angles 00:13:40 SkyScan query 00:13:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:13:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:13:41 Message to Master queued w/err=0: serial=256021 error=0 00:13:46 Received message from Master: op=Filter serial=256022 00:13:46 Color wheel filter change from 0 to 0 00:13:46 FLIGetFilterPos err=0 currentPosition=0 00:13:46 FLIGetStepsRemaining err=0 RemainingSteps=0 00:13:46 Filter is already there-color wheel unchanged 00:13:46 Received message from Master: op=Shutter serial=256023 00:13:46 Shutter LASER close 00:13:46 Received message from Camera: op=State serial=256025 00:13:46 GetSingleValue result=40 Value=cccccccc 00:13:46 SkyScan query 00:13:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:13:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:46 Parameters OK 00:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:46 Set A/D data flow result=40 00:13:46 Set A/D channel type result=40 00:13:46 Set A/D encoding result=40 00:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:46 Set channel filter=0.000000e+000 result=40 00:13:46 Config A/D Result=40 00:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:46 Get A/D filter: -9.255963e+061 result=40 00:13:46 Get A/D value=-858993460 result=40 00:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:46 Parameters OK 00:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:46 Set A/D data flow result=40 00:13:46 Set A/D channel type result=40 00:13:46 Set A/D encoding result=40 00:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:46 Set channel filter=0.000000e+000 result=40 00:13:46 Config A/D Result=40 00:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:46 Get A/D filter: -9.255963e+061 result=40 00:13:46 Get A/D value=-858993460 result=40 00:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:13:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:13:46 Aux= 00:13:46 Message to Camera, serial 256025 queued 00:14:23 Received message from Master: op=PointingHead serial=256038 00:14:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:14:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:14:24 Point started: ret=0 00:14:24 point_skyscan result=0 00:14:24 Check angles 00:14:24 SkyScan query 00:14:25 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.015<-17401 Statuses=0009 0009 00:14:25 Msec=0 True Az=108.915 Ze=-81.015 Az status=0009 Ze status=0009 00:14:25 Check angles 00:14:25 SkyScan query 00:14:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 00:14:26 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 00:14:26 Check angles 00:14:26 SkyScan query 00:14:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 00:14:26 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 00:14:27 Check angles 00:14:27 SkyScan query 00:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.215<-21681 Statuses=0008 0009 00:14:27 Msec=2250 True Az=112.995 Ze=-145.215 Az status=0008 Ze status=0009 00:14:27 Check angles 00:14:27 SkyScan query 00:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.185<-23079 Statuses=0008 0009 00:14:28 Msec=3000 True Az=112.995 Ze=-166.185 Az status=0008 Ze status=0009 00:14:28 Check angles 00:14:28 SkyScan query 00:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:14:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:14:29 Message to Master queued w/err=0: serial=256038 error=0 00:14:34 Received message from Master: op=Filter serial=256039 00:14:34 Color wheel filter change from 0 to 0 00:14:34 FLIGetFilterPos err=0 currentPosition=0 00:14:34 FLIGetStepsRemaining err=0 RemainingSteps=0 00:14:34 Filter is already there-color wheel unchanged 00:14:34 Received message from Master: op=Shutter serial=256040 00:14:34 Shutter LASER open 00:14:34 Received message from Camera: op=State serial=256042 00:14:34 GetSingleValue result=40 Value=cccccccc 00:14:34 SkyScan query 00:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:14:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:35 Parameters OK 00:14:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:35 Set A/D data flow result=40 00:14:35 Set A/D channel type result=40 00:14:35 Set A/D encoding result=40 00:14:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:35 Set channel filter=0.000000e+000 result=40 00:14:35 Config A/D Result=40 00:14:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:35 Get A/D filter: -9.255963e+061 result=40 00:14:35 Get A/D value=-858993460 result=40 00:14:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:35 Parameters OK 00:14:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:35 Set A/D data flow result=40 00:14:35 Set A/D channel type result=40 00:14:35 Set A/D encoding result=40 00:14:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:35 Set channel filter=0.000000e+000 result=40 00:14:35 Config A/D Result=40 00:14:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:35 Get A/D filter: -9.255963e+061 result=40 00:14:35 Get A/D value=-858993460 result=40 00:14:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:14:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:14:35 Aux= 00:14:35 Message to Camera, serial 256042 queued 00:14:43 Received message from Master: op=Shutter serial=256052 00:14:43 Shutter LASER close 00:14:44 Received message from Master: op=PointingHead serial=256056 00:14:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:14:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:14:44 Point started: ret=0 00:14:44 point_skyscan result=0 00:14:45 Check angles 00:14:45 SkyScan query 00:14:45 SkyScan query done: ret=0 az=90.105<-6007 ze=157.425<-1505 Statuses=0009 0009 00:14:45 Msec=0 True Az=90.105 Ze=157.425 Az status=0009 Ze status=0009 00:14:45 Check angles 00:14:45 SkyScan query 00:14:46 SkyScan query done: ret=0 az=72.6<-4840 ze=136.38<-2908 Statuses=0009 0009 00:14:46 Msec=750 True Az=72.6 Ze=136.38 Az status=0009 Ze status=0009 00:14:46 Check angles 00:14:46 SkyScan query 00:14:47 SkyScan query done: ret=0 az=55.2<-3680 ze=115.53<-4298 Statuses=0009 0009 00:14:47 Msec=1500 True Az=55.2 Ze=115.53 Az status=0009 Ze status=0009 00:14:47 Check angles 00:14:47 SkyScan query 00:14:47 SkyScan query done: ret=0 az=40.995<-2733 ze=94.47<-5702 Statuses=0009 0009 00:14:47 Msec=2250 True Az=40.995 Ze=94.47 Az status=0009 Ze status=0009 00:14:48 Check angles 00:14:48 SkyScan query 00:14:48 SkyScan query done: ret=0 az=40.995<-2733 ze=73.605<-7093 Statuses=0008 0009 00:14:48 Msec=3000 True Az=40.995 Ze=73.605 Az status=0008 Ze status=0009 00:14:48 Check angles 00:14:48 SkyScan query 00:14:49 SkyScan query done: ret=0 az=40.98<-2732 ze=52.905<-8473 Statuses=0008 0009 00:14:49 Msec=3750 True Az=40.98 Ze=52.905 Az status=0008 Ze status=0009 00:14:49 Check angles 00:14:49 SkyScan query 00:14:50 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 00:14:50 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 00:14:50 Message to Master queued w/err=0: serial=256056 error=0 00:14:55 Received message from Master: op=Filter serial=256057 00:14:55 Color wheel filter change from 0 to 0 00:14:55 FLIGetFilterPos err=0 currentPosition=0 00:14:55 FLIGetStepsRemaining err=0 RemainingSteps=0 00:14:55 Filter is already there-color wheel unchanged 00:14:55 Received message from Master: op=Shutter serial=256058 00:14:55 Shutter LASER close 00:14:55 Received message from Camera: op=State serial=256060 00:14:55 GetSingleValue result=40 Value=cccccccc 00:14:55 SkyScan query 00:14:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:14:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:56 Parameters OK 00:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:56 Set A/D data flow result=40 00:14:56 Set A/D channel type result=40 00:14:56 Set A/D encoding result=40 00:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:56 Set channel filter=0.000000e+000 result=40 00:14:56 Config A/D Result=40 00:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:56 Get A/D filter: -9.255963e+061 result=40 00:14:56 Get A/D value=-858993460 result=40 00:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:56 Parameters OK 00:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:56 Set A/D data flow result=40 00:14:56 Set A/D channel type result=40 00:14:56 Set A/D encoding result=40 00:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:56 Set channel filter=0.000000e+000 result=40 00:14:56 Config A/D Result=40 00:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:56 Get A/D filter: -9.255963e+061 result=40 00:14:56 Get A/D value=-858993460 result=40 00:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:14:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:14:56 Aux= 00:14:56 Message to Camera, serial 256060 queued 00:15:27 Received message from Master: op=Identify serial=256064 00:15:32 Received message from Master: op=PointingHead serial=256075 00:15:32 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:15:32 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:15:32 Point started: ret=0 00:15:32 point_skyscan result=0 00:15:33 Check angles 00:15:33 SkyScan query 00:15:33 SkyScan query done: ret=0 az=64.08<-4272 ze=66.54<-7564 Statuses=0009 0008 00:15:33 Msec=0 True Az=64.08 Ze=66.54 Az status=0009 Ze status=0008 00:15:33 Check angles 00:15:33 SkyScan query 00:15:34 SkyScan query done: ret=0 az=81.36<-5424 ze=66.51<-7566 Statuses=0009 0008 00:15:34 Msec=750 True Az=81.36 Ze=66.51 Az status=0009 Ze status=0008 00:15:34 Check angles 00:15:34 SkyScan query 00:15:35 SkyScan query done: ret=0 az=98.97<-6598 ze=66.495<-7567 Statuses=0009 0008 00:15:35 Msec=1500 True Az=98.97 Ze=66.495 Az status=0009 Ze status=0008 00:15:35 Check angles 00:15:35 SkyScan query 00:15:36 SkyScan query done: ret=0 az=116.4<-7760 ze=66.495<-7567 Statuses=0009 0008 00:15:36 Msec=2250 True Az=116.4 Ze=66.495 Az status=0009 Ze status=0008 00:15:36 Check angles 00:15:36 SkyScan query 00:15:36 SkyScan query done: ret=0 az=133.86<-8924 ze=66.495<-7567 Statuses=0009 0008 00:15:36 Msec=3000 True Az=133.86 Ze=66.495 Az status=0009 Ze status=0008 00:15:36 Check angles 00:15:36 SkyScan query 00:15:37 SkyScan query done: ret=0 az=151.305<-10087 ze=66.495<-7567 Statuses=0009 0008 00:15:37 Msec=3750 True Az=151.305 Ze=66.495 Az status=0009 Ze status=0008 00:15:37 Check angles 00:15:37 SkyScan query 00:15:38 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:15:38 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:15:38 Message to Master queued w/err=0: serial=256075 error=0 00:15:43 Received message from Master: op=Filter serial=256076 00:15:43 Color wheel filter change from 0 to 0 00:15:43 FLIGetFilterPos err=0 currentPosition=0 [UTC 2018-12-19 00:15:43] 00:15:43 FLIGetStepsRemaining err=0 RemainingSteps=0 00:15:43 Filter is already there-color wheel unchanged 00:15:43 Received message from Master: op=Shutter serial=256077 00:15:43 Shutter LASER close 00:15:43 Received message from Camera: op=State serial=256079 00:15:43 GetSingleValue result=40 Value=cccccccc 00:15:43 SkyScan query 00:15:44 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:15:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:44 Parameters OK 00:15:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:44 Set A/D data flow result=40 00:15:44 Set A/D channel type result=40 00:15:44 Set A/D encoding result=40 00:15:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:44 Set channel filter=0.000000e+000 result=40 00:15:44 Config A/D Result=40 00:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:44 Get A/D filter: -9.255963e+061 result=40 00:15:44 Get A/D value=-858993460 result=40 00:15:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:44 Parameters OK 00:15:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:44 Set A/D data flow result=40 00:15:44 Set A/D channel type result=40 00:15:44 Set A/D encoding result=40 00:15:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:44 Set channel filter=0.000000e+000 result=40 00:15:44 Config A/D Result=40 00:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:44 Get A/D filter: -9.255963e+061 result=40 00:15:44 Get A/D value=-858993460 result=40 00:15:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:44 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:15:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:15:44 Aux= 00:15:44 Message to Camera, serial 256079 queued [UTC 2018-12-19 00:15:52] 00:16:20 Received message from Master: op=PointingHead serial=256092 00:16:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:16:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:16:21 Point started: ret=0 00:16:21 point_skyscan result=0 00:16:22 Check angles 00:16:22 SkyScan query 00:16:22 SkyScan query done: ret=0 az=134.715<-8981 ze=36.36<-9576 Statuses=0009 0009 00:16:22 Msec=0 True Az=134.715 Ze=36.36 Az status=0009 Ze status=0009 00:16:22 Check angles 00:16:22 SkyScan query 00:16:23 SkyScan query done: ret=0 az=117.09<-7806 ze=15.375<-10975 Statuses=0009 0009 00:16:23 Msec=750 True Az=117.09 Ze=15.375 Az status=0009 Ze status=0009 00:16:23 Check angles 00:16:23 SkyScan query 00:16:24 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.535<-12369 Statuses=0009 0009 00:16:24 Msec=1500 True Az=99.84 Ze=-5.535 Az status=0009 Ze status=0009 00:16:24 Check angles 00:16:24 SkyScan query 00:16:24 SkyScan query done: ret=0 az=82.38<-5492 ze=-26.535<-13769 Statuses=0009 0009 00:16:24 Msec=2250 True Az=82.38 Ze=-26.535 Az status=0009 Ze status=0009 00:16:25 Check angles 00:16:25 SkyScan query 00:16:25 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.565<-14571 Statuses=0009 0008 00:16:25 Msec=3000 True Az=64.8 Ze=-38.565 Az status=0009 Ze status=0008 00:16:25 Check angles 00:16:25 SkyScan query 00:16:26 SkyScan query done: ret=0 az=47.385<-3159 ze=-38.535<-14569 Statuses=0009 0008 00:16:26 Msec=3750 True Az=47.385 Ze=-38.535 Az status=0009 Ze status=0008 00:16:26 Check angles 00:16:26 SkyScan query 00:16:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:16:27 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:16:27 Message to Master queued w/err=0: serial=256092 error=0 00:16:32 Received message from Master: op=Filter serial=256093 00:16:32 Color wheel filter change from 0 to 0 00:16:32 FLIGetFilterPos err=0 currentPosition=0 00:16:32 FLIGetStepsRemaining err=0 RemainingSteps=0 00:16:32 Filter is already there-color wheel unchanged 00:16:32 Received message from Master: op=Shutter serial=256094 00:16:32 Shutter LASER close 00:16:32 Received message from Camera: op=State serial=256096 00:16:32 GetSingleValue result=40 Value=cccccccc 00:16:32 SkyScan query 00:16:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:16:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:32 Parameters OK 00:16:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:32 Set A/D data flow result=40 00:16:32 Set A/D channel type result=40 00:16:32 Set A/D encoding result=40 00:16:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:32 Set channel filter=0.000000e+000 result=40 00:16:32 Config A/D Result=40 00:16:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:32 Get A/D filter: -9.255963e+061 result=40 00:16:32 Get A/D value=-858993460 result=40 00:16:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:32 Parameters OK 00:16:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:32 Set A/D data flow result=40 00:16:32 Set A/D channel type result=40 00:16:32 Set A/D encoding result=40 00:16:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:32 Set channel filter=0.000000e+000 result=40 00:16:32 Config A/D Result=40 00:16:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:32 Get A/D filter: -9.255963e+061 result=40 00:16:32 Get A/D value=-858993460 result=40 00:16:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:16:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:16:32 Aux= 00:16:32 Message to Camera, serial 256096 queued 00:17:09 Received message from Master: op=PointingHead serial=256109 00:17:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:17:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:17:10 Point started: ret=0 00:17:10 point_skyscan result=0 00:17:10 Check angles 00:17:10 SkyScan query 00:17:11 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.28<-16552 Statuses=0009 0009 00:17:11 Msec=0 True Az=64.005 Ze=-68.28 Az status=0009 Ze status=0009 00:17:11 Check angles 00:17:11 SkyScan query 00:17:12 SkyScan query done: ret=0 az=81.42<-5428 ze=-89.22<-17948 Statuses=0009 0009 00:17:12 Msec=750 True Az=81.42 Ze=-89.22 Az status=0009 Ze status=0009 00:17:12 Check angles 00:17:12 SkyScan query 00:17:12 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.205<-19347 Statuses=0009 0009 00:17:12 Msec=1500 True Az=98.85 Ze=-110.205 Az status=0009 Ze status=0009 00:17:13 Check angles 00:17:13 SkyScan query 00:17:13 SkyScan query done: ret=0 az=116.355<-7757 ze=-131.16<-20744 Statuses=0009 0009 00:17:13 Msec=2250 True Az=116.355 Ze=-131.16 Az status=0009 Ze status=0009 00:17:13 Check angles 00:17:13 SkyScan query 00:17:14 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 00:17:14 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 00:17:14 Check angles 00:17:14 SkyScan query 00:17:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:17:15 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:17:15 Message to Master queued w/err=0: serial=256109 error=0 00:17:20 Received message from Master: op=Filter serial=256110 00:17:20 Color wheel filter change from 0 to 0 00:17:20 FLIGetFilterPos err=0 currentPosition=0 00:17:20 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:20 Filter is already there-color wheel unchanged 00:17:20 Received message from Master: op=Shutter serial=256111 00:17:20 Shutter LASER close 00:17:20 Received message from Camera: op=State serial=256113 00:17:20 GetSingleValue result=40 Value=cccccccc 00:17:20 SkyScan query 00:17:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:17:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:20 Parameters OK 00:17:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:20 Set A/D data flow result=40 00:17:20 Set A/D channel type result=40 00:17:20 Set A/D encoding result=40 00:17:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:20 Set channel filter=0.000000e+000 result=40 00:17:20 Config A/D Result=40 00:17:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:20 Get A/D filter: -9.255963e+061 result=40 00:17:20 Get A/D value=-858993460 result=40 00:17:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:20 Parameters OK 00:17:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:20 Set A/D data flow result=40 00:17:20 Set A/D channel type result=40 00:17:20 Set A/D encoding result=40 00:17:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:20 Set channel filter=0.000000e+000 result=40 00:17:20 Config A/D Result=40 00:17:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:20 Get A/D filter: -9.255963e+061 result=40 00:17:20 Get A/D value=-858993460 result=40 00:17:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:20 Aux= 00:17:20 Message to Camera, serial 256113 queued 00:17:57 Received message from Master: op=PointingHead serial=256126 00:17:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:17:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:17:58 Point started: ret=0 00:17:58 point_skyscan result=0 00:17:58 Check angles 00:17:58 SkyScan query 00:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0009 0009 00:17:59 Msec=0 True Az=112.995 Ze=-171.045 Az status=0009 Ze status=0009 00:17:59 Check angles 00:17:59 SkyScan query 00:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:18:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:18:00 Message to Master queued w/err=0: serial=256126 error=0 00:18:05 Received message from Master: op=Filter serial=256127 00:18:05 Color wheel filter change from 0 to 0 00:18:05 FLIGetFilterPos err=0 currentPosition=0 00:18:05 FLIGetStepsRemaining err=0 RemainingSteps=0 00:18:05 Filter is already there-color wheel unchanged 00:18:05 Received message from Master: op=Shutter serial=256128 00:18:05 Shutter LASER open 00:18:05 Received message from Camera: op=State serial=256130 00:18:05 GetSingleValue result=40 Value=cccccccc 00:18:05 SkyScan query 00:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:18:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:06 Parameters OK 00:18:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:06 Set A/D data flow result=40 00:18:06 Set A/D channel type result=40 00:18:06 Set A/D encoding result=40 00:18:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:06 Set channel filter=0.000000e+000 result=40 00:18:06 Config A/D Result=40 00:18:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:06 Get A/D filter: -9.255963e+061 result=40 00:18:06 Get A/D value=-858993460 result=40 00:18:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:06 Parameters OK 00:18:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:06 Set A/D data flow result=40 00:18:06 Set A/D channel type result=40 00:18:06 Set A/D encoding result=40 00:18:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:06 Set channel filter=0.000000e+000 result=40 00:18:06 Config A/D Result=40 00:18:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:06 Get A/D filter: -9.255963e+061 result=40 00:18:06 Get A/D value=-858993460 result=40 00:18:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:18:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:18:06 Aux= 00:18:06 Message to Camera, serial 256130 queued 00:18:14 Received message from Master: op=Shutter serial=256140 00:18:14 Shutter LASER close 00:18:15 Received message from Master: op=PointingHead serial=256144 00:18:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:18:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:18:15 Point started: ret=0 00:18:15 point_skyscan result=0 00:18:16 Check angles 00:18:16 SkyScan query 00:18:16 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.95<-21530 Statuses=0009 0009 00:18:16 Msec=0 True Az=136.155 Ze=-142.95 Az status=0009 Ze status=0009 00:18:17 Check angles 00:18:17 SkyScan query 00:18:17 SkyScan query done: ret=0 az=153.675<-10245 ze=-121.935<-20129 Statuses=0009 0009 00:18:17 Msec=750 True Az=153.675 Ze=-121.935 Az status=0009 Ze status=0009 00:18:17 Check angles 00:18:17 SkyScan query 00:18:18 SkyScan query done: ret=0 az=171.165<-11411 ze=-101.085<-18739 Statuses=0009 0009 00:18:18 Msec=1500 True Az=171.165 Ze=-101.085 Az status=0009 Ze status=0009 00:18:18 Check angles 00:18:18 SkyScan query 00:18:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.085<-17339 Statuses=0008 0009 00:18:19 Msec=2250 True Az=176.01 Ze=-80.085 Az status=0008 Ze status=0009 00:18:19 Check angles 00:18:19 SkyScan query 00:18:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.16<-15944 Statuses=0008 0009 00:18:19 Msec=3000 True Az=175.995 Ze=-59.16 Az status=0008 Ze status=0009 00:18:20 Check angles 00:18:20 SkyScan query 00:18:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:18:20 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:18:20 Message to Master queued w/err=0: serial=256144 error=0 00:18:25 Received message from Master: op=Filter serial=256145 00:18:25 Color wheel filter change from 0 to 0 00:18:25 FLIGetFilterPos err=0 currentPosition=0 00:18:25 FLIGetStepsRemaining err=0 RemainingSteps=0 00:18:25 Filter is already there-color wheel unchanged 00:18:25 Received message from Master: op=Shutter serial=256146 00:18:25 Shutter LASER close 00:18:25 Received message from Camera: op=State serial=256148 00:18:25 GetSingleValue result=40 Value=cccccccc 00:18:25 SkyScan query 00:18:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:18:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:26 Parameters OK 00:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:26 Set A/D data flow result=40 00:18:26 Set A/D channel type result=40 00:18:26 Set A/D encoding result=40 00:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:26 Set channel filter=0.000000e+000 result=40 00:18:26 Config A/D Result=40 00:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:26 Get A/D filter: -9.255963e+061 result=40 00:18:26 Get A/D value=-858993460 result=40 00:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:26 Parameters OK 00:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:26 Set A/D data flow result=40 00:18:26 Set A/D channel type result=40 00:18:26 Set A/D encoding result=40 00:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:26 Set channel filter=0.000000e+000 result=40 00:18:26 Config A/D Result=40 00:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:26 Get A/D filter: -9.255963e+061 result=40 00:18:26 Get A/D value=-858993460 result=40 00:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:18:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:18:26 Aux= 00:18:26 Message to Camera, serial 256148 queued 00:19:03 Received message from Master: op=PointingHead serial=256161 00:19:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:19:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:19:03 Point started: ret=0 00:19:03 point_skyscan result=0 00:19:04 Check angles 00:19:04 SkyScan query 00:19:05 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.525<-13435 Statuses=0009 0009 00:19:05 Msec=0 True Az=152.745 Ze=-21.525 Az status=0009 Ze status=0009 00:19:05 Check angles 00:19:05 SkyScan query 00:19:05 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.465<-12031 Statuses=0009 0009 00:19:05 Msec=750 True Az=135.375 Ze=-0.465 Az status=0009 Ze status=0009 00:19:05 Check angles 00:19:05 SkyScan query 00:19:06 SkyScan query done: ret=0 az=117.825<-7855 ze=20.355<-10643 Statuses=0009 0009 00:19:06 Msec=1500 True Az=117.825 Ze=20.355 Az status=0009 Ze status=0009 00:19:06 Check angles 00:19:06 SkyScan query 00:19:07 SkyScan query done: ret=0 az=100.5<-6700 ze=41.43<-9238 Statuses=0009 0009 00:19:07 Msec=2250 True Az=100.5 Ze=41.43 Az status=0009 Ze status=0009 00:19:07 Check angles 00:19:07 SkyScan query 00:19:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 00:19:08 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 00:19:08 Check angles 00:19:08 SkyScan query 00:19:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:19:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:19:08 Message to Master queued w/err=0: serial=256161 error=0 00:19:13 Received message from Master: op=Filter serial=256162 00:19:13 Color wheel filter change from 0 to 0 00:19:13 FLIGetFilterPos err=0 currentPosition=0 00:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 00:19:13 Filter is already there-color wheel unchanged 00:19:13 Received message from Master: op=Shutter serial=256163 00:19:13 Shutter LASER close 00:19:14 Received message from Camera: op=State serial=256165 00:19:14 GetSingleValue result=40 Value=cccccccc 00:19:14 SkyScan query 00:19:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:14 Parameters OK 00:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:14 Set A/D data flow result=40 00:19:14 Set A/D channel type result=40 00:19:14 Set A/D encoding result=40 00:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:14 Set channel filter=0.000000e+000 result=40 00:19:14 Config A/D Result=40 00:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:14 Get A/D filter: -9.255963e+061 result=40 00:19:14 Get A/D value=-858993460 result=40 00:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:14 Parameters OK 00:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:14 Set A/D data flow result=40 00:19:14 Set A/D channel type result=40 00:19:14 Set A/D encoding result=40 00:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:14 Set channel filter=0.000000e+000 result=40 00:19:14 Config A/D Result=40 00:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:14 Get A/D filter: -9.255963e+061 result=40 00:19:14 Get A/D value=-858993460 result=40 00:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:19:14 Aux= 00:19:14 Message to Camera, serial 256165 queued 00:19:51 Received message from Master: op=PointingHead serial=256178 00:19:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:19:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:19:51 Point started: ret=0 00:19:51 point_skyscan result=0 00:19:52 Check angles 00:19:52 SkyScan query 00:19:53 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 00:19:53 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 00:19:53 Check angles 00:19:53 SkyScan query 00:19:53 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 00:19:53 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 00:19:54 Check angles 00:19:54 SkyScan query 00:19:54 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 00:19:54 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 00:19:54 Check angles 00:19:54 SkyScan query 00:19:55 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 00:19:55 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 00:19:55 Check angles 00:19:55 SkyScan query 00:19:56 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:19:56 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:19:56 Check angles 00:19:56 SkyScan query 00:19:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:19:56 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 00:19:56 Message to Master queued w/err=0: serial=256178 error=0 00:20:01 Received message from Master: op=Filter serial=256179 00:20:01 Color wheel filter change from 0 to 0 00:20:01 FLIGetFilterPos err=0 currentPosition=0 00:20:01 FLIGetStepsRemaining err=0 RemainingSteps=0 00:20:01 Filter is already there-color wheel unchanged 00:20:02 Received message from Master: op=Shutter serial=256180 00:20:02 Shutter LASER close 00:20:02 Received message from Camera: op=State serial=256182 00:20:02 GetSingleValue result=40 Value=cccccccc 00:20:02 SkyScan query 00:20:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:20:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:02 Parameters OK 00:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:02 Set A/D data flow result=40 00:20:02 Set A/D channel type result=40 00:20:02 Set A/D encoding result=40 00:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:02 Set channel filter=0.000000e+000 result=40 00:20:02 Config A/D Result=40 00:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:02 Get A/D filter: -9.255963e+061 result=40 00:20:02 Get A/D value=-858993460 result=40 00:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:02 Parameters OK 00:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:02 Set A/D data flow result=40 00:20:02 Set A/D channel type result=40 00:20:02 Set A/D encoding result=40 00:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:02 Set channel filter=0.000000e+000 result=40 00:20:02 Config A/D Result=40 00:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:02 Get A/D filter: -9.255963e+061 result=40 00:20:02 Get A/D value=-858993460 result=40 00:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:02 Aux= 00:20:02 Message to Camera, serial 256182 queued 00:20:39 Received message from Master: op=PointingHead serial=256195 00:20:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:20:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:20:39 Point started: ret=0 00:20:39 point_skyscan result=0 00:20:40 Check angles 00:20:40 SkyScan query 00:20:41 SkyScan query done: ret=0 az=152.94<-10196 ze=8.685<-11421 Statuses=0009 0009 00:20:41 Msec=0 True Az=152.94 Ze=8.685 Az status=0009 Ze status=0009 00:20:41 Check angles 00:20:41 SkyScan query 00:20:42 SkyScan query done: ret=0 az=135.54<-9036 ze=-12.21<-12814 Statuses=0009 0009 00:20:42 Msec=750 True Az=135.54 Ze=-12.21 Az status=0009 Ze status=0009 00:20:42 Check angles 00:20:42 SkyScan query 00:20:42 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.18<-14212 Statuses=0009 0009 00:20:42 Msec=1500 True Az=118.02 Ze=-33.18 Az status=0009 Ze status=0009 00:20:42 Check angles 00:20:42 SkyScan query 00:20:43 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.54<-15436 Statuses=0009 0009 00:20:43 Msec=2250 True Az=100.62 Ze=-51.54 Az status=0009 Ze status=0009 00:20:43 Check angles 00:20:43 SkyScan query 00:20:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 00:20:44 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 00:20:44 Check angles 00:20:44 SkyScan query 00:20:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:20:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:20:45 Message to Master queued w/err=0: serial=256195 error=0 00:20:50 Received message from Master: op=Filter serial=256196 00:20:50 Color wheel filter change from 0 to 0 00:20:50 FLIGetFilterPos err=0 currentPosition=0 00:20:50 FLIGetStepsRemaining err=0 RemainingSteps=0 00:20:50 Filter is already there-color wheel unchanged 00:20:50 Received message from Master: op=Shutter serial=256197 00:20:50 Shutter LASER close 00:20:50 Received message from Camera: op=State serial=256199 00:20:50 GetSingleValue result=40 Value=cccccccc 00:20:50 SkyScan query 00:20:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:20:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:50 Parameters OK 00:20:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:50 Set A/D data flow result=40 00:20:50 Set A/D channel type result=40 00:20:50 Set A/D encoding result=40 00:20:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:50 Set channel filter=0.000000e+000 result=40 00:20:50 Config A/D Result=40 00:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:50 Get A/D filter: -9.255963e+061 result=40 00:20:50 Get A/D value=-858993460 result=40 00:20:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:50 Parameters OK 00:20:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:50 Set A/D data flow result=40 00:20:50 Set A/D channel type result=40 00:20:50 Set A/D encoding result=40 00:20:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:50 Set channel filter=0.000000e+000 result=40 00:20:50 Config A/D Result=40 00:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:50 Get A/D filter: -9.255963e+061 result=40 00:20:50 Get A/D value=-858993460 result=40 00:20:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:50 Aux= 00:20:50 Message to Camera, serial 256199 queued 00:21:27 Received message from Master: op=PointingHead serial=256212 00:21:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:21:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:21:27 Point started: ret=0 00:21:27 point_skyscan result=0 00:21:28 Check angles 00:21:28 SkyScan query 00:21:29 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.375<-17425 Statuses=0009 0009 00:21:29 Msec=0 True Az=109.155 Ze=-81.375 Az status=0009 Ze status=0009 00:21:29 Check angles 00:21:29 SkyScan query 00:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 00:21:30 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 00:21:30 Check angles 00:21:30 SkyScan query 00:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.17<-20278 Statuses=0008 0009 00:21:30 Msec=1500 True Az=112.995 Ze=-124.17 Az status=0008 Ze status=0009 00:21:31 Check angles 00:21:31 SkyScan query 00:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.11<-21674 Statuses=0008 0009 00:21:31 Msec=2250 True Az=112.995 Ze=-145.11 Az status=0008 Ze status=0009 00:21:31 Check angles 00:21:31 SkyScan query 00:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.08<-23072 Statuses=0008 0009 00:21:32 Msec=3000 True Az=112.995 Ze=-166.08 Az status=0008 Ze status=0009 00:21:32 Check angles 00:21:32 SkyScan query 00:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:21:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:21:33 Message to Master queued w/err=0: serial=256212 error=0 00:21:38 Received message from Master: op=Filter serial=256213 00:21:38 Color wheel filter change from 0 to 0 00:21:38 FLIGetFilterPos err=0 currentPosition=0 00:21:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:21:38 Filter is already there-color wheel unchanged 00:21:38 Received message from Master: op=Shutter serial=256214 00:21:38 Shutter LASER open 00:21:38 Received message from Camera: op=State serial=256216 00:21:38 GetSingleValue result=40 Value=cccccccc 00:21:38 SkyScan query 00:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:21:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:39 Parameters OK 00:21:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:39 Set A/D data flow result=40 00:21:39 Set A/D channel type result=40 00:21:39 Set A/D encoding result=40 00:21:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:39 Set channel filter=0.000000e+000 result=40 00:21:39 Config A/D Result=40 00:21:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:39 Get A/D filter: -9.255963e+061 result=40 00:21:39 Get A/D value=-858993460 result=40 00:21:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:39 Parameters OK 00:21:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:39 Set A/D data flow result=40 00:21:39 Set A/D channel type result=40 00:21:39 Set A/D encoding result=40 00:21:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:39 Set channel filter=0.000000e+000 result=40 00:21:39 Config A/D Result=40 00:21:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:39 Get A/D filter: -9.255963e+061 result=40 00:21:39 Get A/D value=-858993460 result=40 00:21:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:21:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:21:39 Aux= 00:21:39 Message to Camera, serial 256216 queued 00:21:47 Received message from Master: op=Shutter serial=256226 00:21:47 Shutter LASER close 00:21:47 Received message from Master: op=PointingHead serial=256230 00:21:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:21:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:21:48 Point started: ret=0 00:21:48 point_skyscan result=0 00:21:48 Check angles 00:21:48 SkyScan query 00:21:49 SkyScan query done: ret=0 az=90.015<-6001 ze=157.35<-1510 Statuses=0009 0009 00:21:49 Msec=0 True Az=90.015 Ze=157.35 Az status=0009 Ze status=0009 00:21:49 Check angles 00:21:49 SkyScan query 00:21:50 SkyScan query done: ret=0 az=72.525<-4835 ze=136.365<-2909 Statuses=0009 0009 00:21:50 Msec=750 True Az=72.525 Ze=136.365 Az status=0009 Ze status=0009 00:21:50 Check angles 00:21:50 SkyScan query 00:21:51 SkyScan query done: ret=0 az=55.14<-3676 ze=115.47<-4302 Statuses=0009 0009 00:21:51 Msec=1500 True Az=55.14 Ze=115.47 Az status=0009 Ze status=0009 00:21:51 Check angles 00:21:51 SkyScan query 00:21:51 SkyScan query done: ret=0 az=41.025<-2735 ze=94.44<-5704 Statuses=0009 0009 00:21:51 Msec=2250 True Az=41.025 Ze=94.44 Az status=0009 Ze status=0009 00:21:51 Check angles 00:21:51 SkyScan query 00:21:52 SkyScan query done: ret=0 az=40.995<-2733 ze=73.545<-7097 Statuses=0008 0009 00:21:52 Msec=3000 True Az=40.995 Ze=73.545 Az status=0008 Ze status=0009 00:21:52 Check angles 00:21:52 SkyScan query 00:21:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 00:21:53 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 00:21:53 Check angles 00:21:53 SkyScan query 00:21:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:21:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:21:54 Message to Master queued w/err=0: serial=256230 error=0 00:21:59 Received message from Master: op=Filter serial=256231 00:21:59 Color wheel filter change from 0 to 0 00:21:59 FLIGetFilterPos err=0 currentPosition=0 00:21:59 FLIGetStepsRemaining err=0 RemainingSteps=0 00:21:59 Filter is already there-color wheel unchanged 00:21:59 Received message from Master: op=Shutter serial=256232 00:21:59 Shutter LASER close 00:21:59 Received message from Camera: op=State serial=256234 00:21:59 GetSingleValue result=40 Value=cccccccc 00:21:59 SkyScan query 00:21:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:21:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:59 Parameters OK 00:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:59 Set A/D data flow result=40 00:21:59 Set A/D channel type result=40 00:21:59 Set A/D encoding result=40 00:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:59 Set channel filter=0.000000e+000 result=40 00:21:59 Config A/D Result=40 00:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:59 Get A/D filter: -9.255963e+061 result=40 00:21:59 Get A/D value=-858993460 result=40 00:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:59 Parameters OK 00:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:59 Set A/D data flow result=40 00:21:59 Set A/D channel type result=40 00:21:59 Set A/D encoding result=40 00:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:59 Set channel filter=0.000000e+000 result=40 00:21:59 Config A/D Result=40 00:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:59 Get A/D filter: -9.255963e+061 result=40 00:21:59 Get A/D value=-858993460 result=40 00:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:21:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:21:59 Aux= 00:21:59 Message to Camera, serial 256234 queued 00:22:36 Received message from Master: op=PointingHead serial=256247 00:22:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:22:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:22:37 Point started: ret=0 00:22:37 point_skyscan result=0 00:22:37 Check angles 00:22:37 SkyScan query 00:22:38 SkyScan query done: ret=0 az=64.05<-4270 ze=66.54<-7564 Statuses=0009 0008 00:22:38 Msec=0 True Az=64.05 Ze=66.54 Az status=0009 Ze status=0008 00:22:38 Check angles 00:22:38 SkyScan query 00:22:39 SkyScan query done: ret=0 az=81.825<-5455 ze=66.51<-7566 Statuses=0009 0008 00:22:39 Msec=750 True Az=81.825 Ze=66.51 Az status=0009 Ze status=0008 00:22:39 Check angles 00:22:39 SkyScan query 00:22:40 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 00:22:40 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 00:22:40 Check angles 00:22:40 SkyScan query 00:22:40 SkyScan query done: ret=0 az=117.3<-7820 ze=66.495<-7567 Statuses=0009 0008 00:22:40 Msec=2250 True Az=117.3 Ze=66.495 Az status=0009 Ze status=0008 00:22:40 Check angles 00:22:40 SkyScan query 00:22:41 SkyScan query done: ret=0 az=134.67<-8978 ze=66.495<-7567 Statuses=0009 0008 00:22:41 Msec=3000 True Az=134.67 Ze=66.495 Az status=0009 Ze status=0008 00:22:41 Check angles 00:22:41 SkyScan query 00:22:42 SkyScan query done: ret=0 az=152.04<-10136 ze=66.495<-7567 Statuses=0009 0008 00:22:42 Msec=3750 True Az=152.04 Ze=66.495 Az status=0009 Ze status=0008 00:22:42 Check angles 00:22:42 SkyScan query 00:22:43 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:22:43 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:22:43 Message to Master queued w/err=0: serial=256247 error=0 00:22:48 Received message from Master: op=Filter serial=256248 00:22:48 Color wheel filter change from 0 to 0 00:22:48 FLIGetFilterPos err=0 currentPosition=0 00:22:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:22:48 Filter is already there-color wheel unchanged 00:22:48 Received message from Master: op=Shutter serial=256249 00:22:48 Shutter LASER close 00:22:48 Received message from Camera: op=State serial=256251 00:22:48 GetSingleValue result=40 Value=cccccccc 00:22:48 SkyScan query 00:22:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:48 Parameters OK 00:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:48 Set A/D data flow result=40 00:22:48 Set A/D channel type result=40 00:22:48 Set A/D encoding result=40 00:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:48 Set channel filter=0.000000e+000 result=40 00:22:48 Config A/D Result=40 00:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:48 Get A/D filter: -9.255963e+061 result=40 00:22:48 Get A/D value=-858993460 result=40 00:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:48 Parameters OK 00:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:48 Set A/D data flow result=40 00:22:48 Set A/D channel type result=40 00:22:48 Set A/D encoding result=40 00:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:48 Set channel filter=0.000000e+000 result=40 00:22:48 Config A/D Result=40 00:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:48 Get A/D filter: -9.255963e+061 result=40 00:22:48 Get A/D value=-858993460 result=40 00:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:22:48 Aux= 00:22:48 Message to Camera, serial 256251 queued 00:23:25 Received message from Master: op=PointingHead serial=256264 00:23:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:23:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:23:25 Point started: ret=0 00:23:25 point_skyscan result=0 00:23:26 Check angles 00:23:26 SkyScan query 00:23:27 SkyScan query done: ret=0 az=135.015<-9001 ze=36.735<-9551 Statuses=0009 0009 00:23:27 Msec=0 True Az=135.015 Ze=36.735 Az status=0009 Ze status=0009 00:23:27 Check angles 00:23:27 SkyScan query 00:23:28 SkyScan query done: ret=0 az=117.555<-7837 ze=15.75<-10950 Statuses=0009 0009 00:23:28 Msec=750 True Az=117.555 Ze=15.75 Az status=0009 Ze status=0009 00:23:28 Check angles 00:23:28 SkyScan query 00:23:28 SkyScan query done: ret=0 az=100.11<-6674 ze=-5.19<-12346 Statuses=0009 0009 00:23:28 Msec=1500 True Az=100.11 Ze=-5.19 Az status=0009 Ze status=0009 00:23:28 Check angles 00:23:28 SkyScan query 00:23:29 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.16<-13744 Statuses=0009 0009 00:23:29 Msec=2250 True Az=82.485 Ze=-26.16 Az status=0009 Ze status=0009 00:23:29 Check angles 00:23:29 SkyScan query 00:23:30 SkyScan query done: ret=0 az=64.71<-4314 ze=-38.58<-14572 Statuses=0009 0008 00:23:30 Msec=3000 True Az=64.71 Ze=-38.58 Az status=0009 Ze status=0008 00:23:30 Check angles 00:23:30 SkyScan query 00:23:31 SkyScan query done: ret=0 az=47.205<-3147 ze=-38.52<-14568 Statuses=0009 0008 00:23:31 Msec=3750 True Az=47.205 Ze=-38.52 Az status=0009 Ze status=0008 00:23:31 Check angles 00:23:31 SkyScan query 00:23:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:23:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:23:31 Message to Master queued w/err=0: serial=256264 error=0 00:23:36 Received message from Master: op=Filter serial=256265 00:23:36 Color wheel filter change from 0 to 0 00:23:36 FLIGetFilterPos err=0 currentPosition=0 00:23:36 FLIGetStepsRemaining err=0 RemainingSteps=0 00:23:36 Filter is already there-color wheel unchanged 00:23:36 Received message from Master: op=Shutter serial=256266 00:23:36 Shutter LASER close 00:23:37 Received message from Camera: op=State serial=256268 00:23:37 GetSingleValue result=40 Value=cccccccc 00:23:37 SkyScan query 00:23:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:23:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:37 Parameters OK 00:23:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:37 Set A/D data flow result=40 00:23:37 Set A/D channel type result=40 00:23:37 Set A/D encoding result=40 00:23:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:37 Set channel filter=0.000000e+000 result=40 00:23:37 Config A/D Result=40 00:23:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:37 Get A/D filter: -9.255963e+061 result=40 00:23:37 Get A/D value=-858993460 result=40 00:23:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:37 Parameters OK 00:23:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:37 Set A/D data flow result=40 00:23:37 Set A/D channel type result=40 00:23:37 Set A/D encoding result=40 00:23:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:37 Set channel filter=0.000000e+000 result=40 00:23:37 Config A/D Result=40 00:23:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:37 Get A/D filter: -9.255963e+061 result=40 00:23:37 Get A/D value=-858993460 result=40 00:23:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:23:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:23:37 Aux= 00:23:37 Message to Camera, serial 256268 queued 00:24:14 Received message from Master: op=PointingHead serial=256281 00:24:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:24:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:24:14 Point started: ret=0 00:24:14 point_skyscan result=0 00:24:15 Check angles 00:24:15 SkyScan query 00:24:16 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.22<-16548 Statuses=0009 0009 00:24:16 Msec=0 True Az=63.87 Ze=-68.22 Az status=0009 Ze status=0009 00:24:16 Check angles 00:24:16 SkyScan query 00:24:16 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.085<-17939 Statuses=0009 0009 00:24:16 Msec=750 True Az=81.315 Ze=-89.085 Az status=0009 Ze status=0009 00:24:17 Check angles 00:24:17 SkyScan query 00:24:17 SkyScan query done: ret=0 az=98.805<-6587 ze=-110.04<-19336 Statuses=0009 0009 00:24:17 Msec=1500 True Az=98.805 Ze=-110.04 Az status=0009 Ze status=0009 00:24:17 Check angles 00:24:17 SkyScan query 00:24:18 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.475<-20765 Statuses=0009 0009 00:24:18 Msec=2250 True Az=116.595 Ze=-131.475 Az status=0009 Ze status=0009 00:24:18 Check angles 00:24:18 SkyScan query 00:24:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 00:24:19 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 00:24:19 Check angles 00:24:19 SkyScan query 00:24:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:24:19 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:24:19 Message to Master queued w/err=0: serial=256281 error=0 00:24:24 Received message from Master: op=Filter serial=256282 00:24:24 Color wheel filter change from 0 to 0 00:24:24 FLIGetFilterPos err=0 currentPosition=0 00:24:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:24:24 Filter is already there-color wheel unchanged 00:24:25 Received message from Master: op=Shutter serial=256283 00:24:25 Shutter LASER close 00:24:25 Received message from Camera: op=State serial=256285 00:24:25 GetSingleValue result=40 Value=cccccccc 00:24:25 SkyScan query 00:24:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:24:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:25 Parameters OK 00:24:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:25 Set A/D data flow result=40 00:24:25 Set A/D channel type result=40 00:24:25 Set A/D encoding result=40 00:24:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:25 Set channel filter=0.000000e+000 result=40 00:24:25 Config A/D Result=40 00:24:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:25 Get A/D filter: -9.255963e+061 result=40 00:24:25 Get A/D value=-858993460 result=40 00:24:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:25 Parameters OK 00:24:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:25 Set A/D data flow result=40 00:24:25 Set A/D channel type result=40 00:24:25 Set A/D encoding result=40 00:24:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:25 Set channel filter=0.000000e+000 result=40 00:24:25 Config A/D Result=40 00:24:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:25 Get A/D filter: -9.255963e+061 result=40 00:24:25 Get A/D value=-858993460 result=40 00:24:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:24:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:24:25 Aux= 00:24:25 Message to Camera, serial 256285 queued 00:25:02 Received message from Master: op=PointingHead serial=256298 00:25:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:25:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:25:02 Point started: ret=0 00:25:02 point_skyscan result=0 00:25:03 Check angles 00:25:03 SkyScan query 00:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0009 0009 00:25:04 Msec=0 True Az=112.995 Ze=-170.955 Az status=0009 Ze status=0009 00:25:04 Check angles 00:25:04 SkyScan query 00:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:25:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:25:05 Message to Master queued w/err=0: serial=256298 error=0 00:25:10 Received message from Master: op=Filter serial=256299 00:25:10 Color wheel filter change from 0 to 0 00:25:10 FLIGetFilterPos err=0 currentPosition=0 00:25:10 FLIGetStepsRemaining err=0 RemainingSteps=0 00:25:10 Filter is already there-color wheel unchanged 00:25:10 Received message from Master: op=Shutter serial=256300 00:25:10 Shutter LASER open 00:25:10 Received message from Camera: op=State serial=256302 00:25:10 GetSingleValue result=40 Value=cccccccc 00:25:10 SkyScan query 00:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:25:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:10 Parameters OK 00:25:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:10 Set A/D data flow result=40 00:25:10 Set A/D channel type result=40 00:25:10 Set A/D encoding result=40 00:25:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:10 Set channel filter=0.000000e+000 result=40 00:25:10 Config A/D Result=40 00:25:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:10 Get A/D filter: -9.255963e+061 result=40 00:25:10 Get A/D value=-858993460 result=40 00:25:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:10 Parameters OK 00:25:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:10 Set A/D data flow result=40 00:25:10 Set A/D channel type result=40 00:25:10 Set A/D encoding result=40 00:25:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:10 Set channel filter=0.000000e+000 result=40 00:25:10 Config A/D Result=40 00:25:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:10 Get A/D filter: -9.255963e+061 result=40 00:25:10 Get A/D value=-858993460 result=40 00:25:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:25:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:25:10 Aux= 00:25:10 Message to Camera, serial 256302 queued 00:25:19 Received message from Master: op=Shutter serial=256312 00:25:19 Shutter LASER close 00:25:19 Received message from Master: op=PointingHead serial=256316 00:25:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:25:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:25:20 Point started: ret=0 00:25:20 point_skyscan result=0 00:25:21 Check angles 00:25:21 SkyScan query 00:25:21 SkyScan query done: ret=0 az=136.08<-9072 ze=-143.145<-21543 Statuses=0009 0009 00:25:21 Msec=0 True Az=136.08 Ze=-143.145 Az status=0009 Ze status=0009 00:25:21 Check angles 00:25:21 SkyScan query 00:25:22 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.19<-20146 Statuses=0009 0009 00:25:22 Msec=750 True Az=153.45 Ze=-122.19 Az status=0009 Ze status=0009 00:25:22 Check angles 00:25:22 SkyScan query 00:25:23 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.295<-18753 Statuses=0009 0009 00:25:23 Msec=1500 True Az=171.09 Ze=-101.295 Az status=0009 Ze status=0009 00:25:23 Check angles 00:25:23 SkyScan query 00:25:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.31<-17354 Statuses=0008 0009 00:25:23 Msec=2250 True Az=176.01 Ze=-80.31 Az status=0008 Ze status=0009 00:25:24 Check angles 00:25:24 SkyScan query 00:25:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.385<-15959 Statuses=0008 0009 00:25:24 Msec=3000 True Az=175.995 Ze=-59.385 Az status=0008 Ze status=0009 00:25:24 Check angles 00:25:24 SkyScan query 00:25:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:25:25 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:25:25 Message to Master queued w/err=0: serial=256316 error=0 00:25:30 Received message from Master: op=Filter serial=256317 00:25:30 Color wheel filter change from 0 to 0 00:25:30 FLIGetFilterPos err=0 currentPosition=0 00:25:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:25:30 Filter is already there-color wheel unchanged 00:25:30 Received message from Master: op=Shutter serial=256318 00:25:30 Shutter LASER close 00:25:30 Received message from Camera: op=State serial=256320 00:25:30 GetSingleValue result=40 Value=cccccccc 00:25:30 SkyScan query 00:25:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:25:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:31 Parameters OK 00:25:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:31 Set A/D data flow result=40 00:25:31 Set A/D channel type result=40 00:25:31 Set A/D encoding result=40 00:25:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:31 Set channel filter=0.000000e+000 result=40 00:25:31 Config A/D Result=40 00:25:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:31 Get A/D filter: -9.255963e+061 result=40 00:25:31 Get A/D value=-858993460 result=40 00:25:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:31 Parameters OK 00:25:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:31 Set A/D data flow result=40 00:25:31 Set A/D channel type result=40 00:25:31 Set A/D encoding result=40 00:25:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:31 Set channel filter=0.000000e+000 result=40 00:25:31 Config A/D Result=40 00:25:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:31 Get A/D filter: -9.255963e+061 result=40 00:25:31 Get A/D value=-858993460 result=40 00:25:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:25:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:25:31 Aux= 00:25:31 Message to Camera, serial 256320 queued 00:26:08 Received message from Master: op=PointingHead serial=256333 00:26:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:26:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:26:08 Point started: ret=0 00:26:08 point_skyscan result=0 00:26:09 Check angles 00:26:09 SkyScan query 00:26:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-22.065<-13471 Statuses=0008 0009 00:26:10 Msec=0 True Az=175.995 Ze=-22.065 Az status=0008 Ze status=0009 00:26:10 Check angles 00:26:10 SkyScan query 00:26:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.585<-12039 Statuses=0008 0009 00:26:10 Msec=750 True Az=175.995 Ze=-0.585 Az status=0008 Ze status=0009 00:26:10 Check angles 00:26:10 SkyScan query [UTC 2018-12-19 00:26:11] 00:26:11 SkyScan query done: ret=0 az=175.995<-11733 ze=20.73<-10618 Statuses=0008 0009 00:26:11 Msec=1500 True Az=175.995 Ze=20.73 Az status=0008 Ze status=0009 00:26:11 Check angles 00:26:11 SkyScan query 00:26:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 00:26:12 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 00:26:12 Check angles 00:26:12 SkyScan query 00:26:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 00:26:13 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 00:26:13 Message to Master queued w/err=0: serial=256333 error=0 00:26:18 Received message from Master: op=Filter serial=256334 00:26:18 Color wheel filter change from 0 to 0 00:26:18 FLIGetFilterPos err=0 currentPosition=0 00:26:18 FLIGetStepsRemaining err=0 RemainingSteps=0 00:26:18 Filter is already there-color wheel unchanged 00:26:18 Received message from Master: op=Shutter serial=256335 00:26:18 Shutter LASER close 00:26:18 Received message from Camera: op=State serial=256337 00:26:18 GetSingleValue result=40 Value=cccccccc 00:26:18 SkyScan query 00:26:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:26:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:18 Parameters OK 00:26:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:18 Set A/D data flow result=40 00:26:18 Set A/D channel type result=40 00:26:18 Set A/D encoding result=40 00:26:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:18 Set channel filter=0.000000e+000 result=40 00:26:18 Config A/D Result=40 00:26:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:18 Get A/D filter: -9.255963e+061 result=40 00:26:18 Get A/D value=-858993460 result=40 00:26:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:18 Parameters OK 00:26:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:18 Set A/D data flow result=40 00:26:18 Set A/D channel type result=40 00:26:18 Set A/D encoding result=40 00:26:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:18 Set channel filter=0.000000e+000 result=40 00:26:18 Config A/D Result=40 00:26:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:18 Get A/D filter: -9.255963e+061 result=40 00:26:18 Get A/D value=-858993460 result=40 00:26:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:26:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:26:18 Aux= 00:26:18 Message to Camera, serial 256337 queued 00:26:55 Received message from Master: op=PointingHead serial=256350 00:26:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:26:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:26:56 Point started: ret=0 00:26:56 point_skyscan result=0 00:26:56 Check angles 00:26:56 SkyScan query 00:26:57 SkyScan query done: ret=0 az=152.7<-10180 ze=8.595<-11427 Statuses=0009 0009 00:26:57 Msec=0 True Az=152.7 Ze=8.595 Az status=0009 Ze status=0009 00:26:57 Check angles 00:26:57 SkyScan query 00:26:58 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.255<-12817 Statuses=0009 0009 00:26:58 Msec=750 True Az=135.27 Ze=-12.255 Az status=0009 Ze status=0009 00:26:58 Check angles 00:26:58 SkyScan query 00:26:58 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.3<-14220 Statuses=0009 0009 00:26:58 Msec=1500 True Az=117.78 Ze=-33.3 Az status=0009 Ze status=0009 00:26:59 Check angles 00:26:59 SkyScan query 00:26:59 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.54<-15436 Statuses=0009 0009 00:26:59 Msec=2250 True Az=100.41 Ze=-51.54 Az status=0009 Ze status=0009 00:26:59 Check angles 00:26:59 SkyScan query 00:27:00 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:27:00 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:27:00 Check angles 00:27:00 SkyScan query 00:27:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:27:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:27:01 Message to Master queued w/err=0: serial=256350 error=0 00:27:06 Received message from Master: op=Filter serial=256351 00:27:06 Color wheel filter change from 0 to 0 00:27:06 FLIGetFilterPos err=0 currentPosition=0 00:27:06 FLIGetStepsRemaining err=0 RemainingSteps=0 00:27:06 Filter is already there-color wheel unchanged 00:27:06 Received message from Master: op=Shutter serial=256352 00:27:06 Shutter LASER close 00:27:06 Received message from Camera: op=State serial=256354 00:27:06 GetSingleValue result=40 Value=cccccccc 00:27:06 SkyScan query 00:27:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:06 Parameters OK 00:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:06 Set A/D data flow result=40 00:27:06 Set A/D channel type result=40 00:27:06 Set A/D encoding result=40 00:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:06 Set channel filter=0.000000e+000 result=40 00:27:06 Config A/D Result=40 00:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:06 Get A/D filter: -9.255963e+061 result=40 00:27:06 Get A/D value=-858993460 result=40 00:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:06 Parameters OK 00:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:06 Set A/D data flow result=40 00:27:06 Set A/D channel type result=40 00:27:06 Set A/D encoding result=40 00:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:06 Set channel filter=0.000000e+000 result=40 00:27:06 Config A/D Result=40 00:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:06 Get A/D filter: -9.255963e+061 result=40 00:27:06 Get A/D value=-858993460 result=40 00:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:27:06 Aux= 00:27:06 Message to Camera, serial 256354 queued 00:27:43 Received message from Master: op=PointingHead serial=256367 00:27:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:27:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:27:44 Point started: ret=0 00:27:44 point_skyscan result=0 00:27:44 Check angles 00:27:44 SkyScan query 00:27:45 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.105<-17407 Statuses=0009 0009 00:27:45 Msec=0 True Az=108.81 Ze=-81.105 Az status=0009 Ze status=0009 00:27:45 Check angles 00:27:45 SkyScan query 00:27:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 00:27:46 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 00:27:46 Check angles 00:27:46 SkyScan query 00:27:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 00:27:46 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 00:27:47 Check angles 00:27:47 SkyScan query 00:27:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.305<-21687 Statuses=0008 0009 00:27:47 Msec=2250 True Az=112.995 Ze=-145.305 Az status=0008 Ze status=0009 00:27:47 Check angles 00:27:47 SkyScan query 00:27:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.23<-23082 Statuses=0008 0009 00:27:48 Msec=3000 True Az=112.995 Ze=-166.23 Az status=0008 Ze status=0009 00:27:48 Check angles 00:27:48 SkyScan query 00:27:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:27:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:27:49 Message to Master queued w/err=0: serial=256367 error=0 00:27:54 Received message from Master: op=Filter serial=256368 00:27:54 Color wheel filter change from 0 to 0 00:27:54 FLIGetFilterPos err=0 currentPosition=0 00:27:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:27:54 Filter is already there-color wheel unchanged 00:27:54 Received message from Master: op=Shutter serial=256369 00:27:54 Shutter LASER open 00:27:54 Received message from Camera: op=State serial=256371 00:27:54 GetSingleValue result=40 Value=cccccccc 00:27:54 SkyScan query 00:27:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:27:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:55 Parameters OK 00:27:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:55 Set A/D data flow result=40 00:27:55 Set A/D channel type result=40 00:27:55 Set A/D encoding result=40 00:27:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:55 Set channel filter=0.000000e+000 result=40 00:27:55 Config A/D Result=40 00:27:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:55 Get A/D filter: -9.255963e+061 result=40 00:27:55 Get A/D value=-858993460 result=40 00:27:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:55 Parameters OK 00:27:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:55 Set A/D data flow result=40 00:27:55 Set A/D channel type result=40 00:27:55 Set A/D encoding result=40 00:27:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:55 Set channel filter=0.000000e+000 result=40 00:27:55 Config A/D Result=40 00:27:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:55 Get A/D filter: -9.255963e+061 result=40 00:27:55 Get A/D value=-858993460 result=40 00:27:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:27:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:27:55 Aux= 00:27:55 Message to Camera, serial 256371 queued 00:28:03 Received message from Master: op=Shutter serial=256381 00:28:03 Shutter LASER close 00:28:04 Received message from Master: op=PointingHead serial=256385 00:28:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:28:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:28:04 Point started: ret=0 00:28:04 point_skyscan result=0 00:28:05 Check angles 00:28:05 SkyScan query 00:28:05 SkyScan query done: ret=0 az=89.64<-5976 ze=156.915<-1539 Statuses=0009 0009 00:28:05 Msec=0 True Az=89.64 Ze=156.915 Az status=0009 Ze status=0009 00:28:05 Check angles 00:28:05 SkyScan query 00:28:06 SkyScan query done: ret=0 az=71.865<-4791 ze=135.57<-2962 Statuses=0009 0009 00:28:06 Msec=750 True Az=71.865 Ze=135.57 Az status=0009 Ze status=0009 00:28:06 Check angles 00:28:06 SkyScan query 00:28:07 SkyScan query done: ret=0 az=54.36<-3624 ze=114.555<-4363 Statuses=0009 0009 00:28:07 Msec=1500 True Az=54.36 Ze=114.555 Az status=0009 Ze status=0009 00:28:07 Check angles 00:28:07 SkyScan query 00:28:07 SkyScan query done: ret=0 az=41.01<-2734 ze=93.66<-5756 Statuses=0009 0009 00:28:07 Msec=2250 True Az=41.01 Ze=93.66 Az status=0009 Ze status=0009 00:28:08 Check angles 00:28:08 SkyScan query 00:28:08 SkyScan query done: ret=0 az=40.98<-2732 ze=72.225<-7185 Statuses=0008 0009 00:28:08 Msec=3000 True Az=40.98 Ze=72.225 Az status=0008 Ze status=0009 00:28:08 Check angles 00:28:08 SkyScan query 00:28:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.17<-8522 Statuses=0008 0009 00:28:09 Msec=3750 True Az=40.995 Ze=52.17 Az status=0008 Ze status=0009 00:28:09 Check angles 00:28:09 SkyScan query 00:28:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:28:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:28:10 Message to Master queued w/err=0: serial=256385 error=0 00:28:15 Received message from Master: op=Filter serial=256386 00:28:15 Color wheel filter change from 0 to 0 00:28:15 FLIGetFilterPos err=0 currentPosition=0 00:28:15 FLIGetStepsRemaining err=0 RemainingSteps=0 00:28:15 Filter is already there-color wheel unchanged 00:28:15 Received message from Master: op=Shutter serial=256387 00:28:15 Shutter LASER close 00:28:15 Received message from Camera: op=State serial=256389 00:28:15 GetSingleValue result=40 Value=cccccccc 00:28:15 SkyScan query 00:28:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:28:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:16 Parameters OK 00:28:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:16 Set A/D data flow result=40 00:28:16 Set A/D channel type result=40 00:28:16 Set A/D encoding result=40 00:28:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:16 Set channel filter=0.000000e+000 result=40 00:28:16 Config A/D Result=40 00:28:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:16 Get A/D filter: -9.255963e+061 result=40 00:28:16 Get A/D value=-858993460 result=40 00:28:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:16 Parameters OK 00:28:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:16 Set A/D data flow result=40 00:28:16 Set A/D channel type result=40 00:28:16 Set A/D encoding result=40 00:28:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:16 Set channel filter=0.000000e+000 result=40 00:28:16 Config A/D Result=40 00:28:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:16 Get A/D filter: -9.255963e+061 result=40 00:28:16 Get A/D value=-858993460 result=40 00:28:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:28:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:28:16 Aux= 00:28:16 Message to Camera, serial 256389 queued 00:28:53 Received message from Master: op=PointingHead serial=256402 00:28:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:28:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:28:53 Point started: ret=0 00:28:53 point_skyscan result=0 00:28:54 Check angles 00:28:54 SkyScan query 00:28:54 SkyScan query done: ret=0 az=63.87<-4258 ze=66.525<-7565 Statuses=0009 0008 00:28:54 Msec=0 True Az=63.87 Ze=66.525 Az status=0009 Ze status=0008 00:28:54 Check angles 00:28:54 SkyScan query 00:28:55 SkyScan query done: ret=0 az=81.315<-5421 ze=66.51<-7566 Statuses=0009 0008 00:28:55 Msec=750 True Az=81.315 Ze=66.51 Az status=0009 Ze status=0008 00:28:55 Check angles 00:28:55 SkyScan query 00:28:56 SkyScan query done: ret=0 az=99.18<-6612 ze=66.495<-7567 Statuses=0009 0008 00:28:56 Msec=1500 True Az=99.18 Ze=66.495 Az status=0009 Ze status=0008 00:28:56 Check angles 00:28:56 SkyScan query 00:28:56 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 00:28:56 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 00:28:57 Check angles 00:28:57 SkyScan query 00:28:57 SkyScan query done: ret=0 az=134.91<-8994 ze=66.495<-7567 Statuses=0009 0008 00:28:57 Msec=3000 True Az=134.91 Ze=66.495 Az status=0009 Ze status=0008 00:28:57 Check angles 00:28:57 SkyScan query 00:28:58 SkyScan query done: ret=0 az=152.19<-10146 ze=66.495<-7567 Statuses=0009 0008 00:28:58 Msec=3750 True Az=152.19 Ze=66.495 Az status=0009 Ze status=0008 00:28:58 Check angles 00:28:58 SkyScan query 00:28:59 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:28:59 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:28:59 Message to Master queued w/err=0: serial=256402 error=0 00:29:04 Received message from Master: op=Filter serial=256403 00:29:04 Color wheel filter change from 0 to 0 00:29:04 FLIGetFilterPos err=0 currentPosition=0 00:29:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:29:04 Filter is already there-color wheel unchanged 00:29:04 Received message from Master: op=Shutter serial=256404 00:29:04 Shutter LASER close 00:29:04 Received message from Camera: op=State serial=256406 00:29:04 GetSingleValue result=40 Value=cccccccc 00:29:04 SkyScan query 00:29:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:29:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:05 Parameters OK 00:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:05 Set A/D data flow result=40 00:29:05 Set A/D channel type result=40 00:29:05 Set A/D encoding result=40 00:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:05 Set channel filter=0.000000e+000 result=40 00:29:05 Config A/D Result=40 00:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:05 Get A/D filter: -9.255963e+061 result=40 00:29:05 Get A/D value=-858993460 result=40 00:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:05 Parameters OK 00:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:05 Set A/D data flow result=40 00:29:05 Set A/D channel type result=40 00:29:05 Set A/D encoding result=40 00:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:05 Set channel filter=0.000000e+000 result=40 00:29:05 Config A/D Result=40 00:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:05 Get A/D filter: -9.255963e+061 result=40 00:29:05 Get A/D value=-858993460 result=40 00:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:29:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:29:05 Aux= 00:29:05 Message to Camera, serial 256406 queued 00:29:40 Received message from Master: op=PointingHead serial=256418 00:29:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:29:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:29:41 Point started: ret=0 00:29:41 point_skyscan result=0 00:29:42 Check angles 00:29:42 SkyScan query 00:29:42 SkyScan query done: ret=0 az=134.805<-8987 ze=36.51<-9566 Statuses=0009 0009 00:29:42 Msec=0 True Az=134.805 Ze=36.51 Az status=0009 Ze status=0009 00:29:42 Check angles 00:29:42 SkyScan query 00:29:43 SkyScan query done: ret=0 az=117.315<-7821 ze=15.54<-10964 Statuses=0009 0009 00:29:43 Msec=750 True Az=117.315 Ze=15.54 Az status=0009 Ze status=0009 00:29:43 Check angles 00:29:43 SkyScan query 00:29:44 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.415<-12361 Statuses=0009 0009 00:29:44 Msec=1500 True Az=99.93 Ze=-5.415 Az status=0009 Ze status=0009 00:29:44 Check angles 00:29:44 SkyScan query 00:29:44 SkyScan query done: ret=0 az=82.32<-5488 ze=-26.385<-13759 Statuses=0009 0009 00:29:44 Msec=2250 True Az=82.32 Ze=-26.385 Az status=0009 Ze status=0009 00:29:45 Check angles 00:29:45 SkyScan query 00:29:45 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.58<-14572 Statuses=0009 0008 00:29:45 Msec=3000 True Az=64.92 Ze=-38.58 Az status=0009 Ze status=0008 00:29:45 Check angles 00:29:45 SkyScan query 00:29:46 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.52<-14568 Statuses=0009 0008 00:29:46 Msec=3750 True Az=47.445 Ze=-38.52 Az status=0009 Ze status=0008 00:29:46 Check angles 00:29:46 SkyScan query 00:29:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:29:47 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:29:47 Message to Master queued w/err=0: serial=256418 error=0 00:29:52 Received message from Master: op=Filter serial=256419 00:29:52 Color wheel filter change from 0 to 0 00:29:52 FLIGetFilterPos err=0 currentPosition=0 00:29:52 FLIGetStepsRemaining err=0 RemainingSteps=0 00:29:52 Filter is already there-color wheel unchanged 00:29:52 Received message from Master: op=Shutter serial=256420 00:29:52 Shutter LASER close 00:29:52 Received message from Camera: op=State serial=256422 00:29:52 GetSingleValue result=40 Value=cccccccc 00:29:52 SkyScan query 00:29:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:29:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:52 Parameters OK 00:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:52 Set A/D data flow result=40 00:29:52 Set A/D channel type result=40 00:29:52 Set A/D encoding result=40 00:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:52 Set channel filter=0.000000e+000 result=40 00:29:52 Config A/D Result=40 00:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:52 Get A/D filter: -9.255963e+061 result=40 00:29:52 Get A/D value=-858993460 result=40 00:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:52 Parameters OK 00:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:52 Set A/D data flow result=40 00:29:52 Set A/D channel type result=40 00:29:52 Set A/D encoding result=40 00:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:52 Set channel filter=0.000000e+000 result=40 00:29:52 Config A/D Result=40 00:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:52 Get A/D filter: -9.255963e+061 result=40 00:29:52 Get A/D value=-858993460 result=40 00:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:29:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:29:52 Aux= 00:29:52 Message to Camera, serial 256422 queued 00:30:29 Received message from Master: op=PointingHead serial=256435 00:30:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:30:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:30:30 Point started: ret=0 00:30:30 point_skyscan result=0 00:30:30 Check angles 00:30:30 SkyScan query 00:30:31 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.475<-16565 Statuses=0009 0009 00:30:31 Msec=0 True Az=64.2 Ze=-68.475 Az status=0009 Ze status=0009 00:30:31 Check angles 00:30:31 SkyScan query 00:30:32 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.445<-17963 Statuses=0009 0009 00:30:32 Msec=750 True Az=81.585 Ze=-89.445 Az status=0009 Ze status=0009 00:30:32 Check angles 00:30:32 SkyScan query 00:30:32 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.835<-19389 Statuses=0009 0009 00:30:32 Msec=1500 True Az=99.45 Ze=-110.835 Az status=0009 Ze status=0009 00:30:33 Check angles 00:30:33 SkyScan query 00:30:33 SkyScan query done: ret=0 az=116.88<-7792 ze=-131.76<-20784 Statuses=0009 0009 00:30:33 Msec=2250 True Az=116.88 Ze=-131.76 Az status=0009 Ze status=0009 00:30:33 Check angles 00:30:33 SkyScan query 00:30:34 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 00:30:34 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 00:30:34 Check angles 00:30:34 SkyScan query 00:30:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 00:30:35 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 00:30:35 Message to Master queued w/err=0: serial=256435 error=0 00:30:40 Received message from Master: op=Filter serial=256436 00:30:40 Color wheel filter change from 0 to 0 00:30:40 FLIGetFilterPos err=0 currentPosition=0 00:30:40 FLIGetStepsRemaining err=0 RemainingSteps=0 00:30:40 Filter is already there-color wheel unchanged 00:30:40 Received message from Master: op=Shutter serial=256437 00:30:40 Shutter LASER close 00:30:40 Received message from Camera: op=State serial=256439 00:30:40 GetSingleValue result=40 Value=cccccccc 00:30:40 SkyScan query 00:30:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:30:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:41 Parameters OK 00:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:41 Set A/D data flow result=40 00:30:41 Set A/D channel type result=40 00:30:41 Set A/D encoding result=40 00:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:41 Set channel filter=0.000000e+000 result=40 00:30:41 Config A/D Result=40 00:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:41 Get A/D filter: -9.255963e+061 result=40 00:30:41 Get A/D value=-858993460 result=40 00:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:41 Parameters OK 00:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:41 Set A/D data flow result=40 00:30:41 Set A/D channel type result=40 00:30:41 Set A/D encoding result=40 00:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:41 Set channel filter=0.000000e+000 result=40 00:30:41 Config A/D Result=40 00:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:41 Get A/D filter: -9.255963e+061 result=40 00:30:41 Get A/D value=-858993460 result=40 00:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:30:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:30:41 Aux= 00:30:41 Message to Camera, serial 256439 queued 00:31:17 Received message from Master: op=PointingHead serial=256452 00:31:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:31:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:31:18 Point started: ret=0 00:31:18 point_skyscan result=0 00:31:18 Check angles 00:31:18 SkyScan query 00:31:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.36<-23424 Statuses=0009 0009 00:31:19 Msec=0 True Az=113.01 Ze=-171.36 Az status=0009 Ze status=0009 00:31:19 Check angles 00:31:19 SkyScan query 00:31:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:31:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:31:20 Message to Master queued w/err=0: serial=256452 error=0 00:31:25 Received message from Master: op=Filter serial=256453 00:31:25 Color wheel filter change from 0 to 0 00:31:25 FLIGetFilterPos err=0 currentPosition=0 00:31:25 FLIGetStepsRemaining err=0 RemainingSteps=0 00:31:25 Filter is already there-color wheel unchanged 00:31:25 Received message from Master: op=Shutter serial=256454 00:31:25 Shutter LASER open 00:31:25 Received message from Camera: op=State serial=256456 00:31:25 GetSingleValue result=40 Value=cccccccc 00:31:25 SkyScan query 00:31:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:31:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:26 Parameters OK 00:31:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:26 Set A/D data flow result=40 00:31:26 Set A/D channel type result=40 00:31:26 Set A/D encoding result=40 00:31:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:26 Set channel filter=0.000000e+000 result=40 00:31:26 Config A/D Result=40 00:31:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:26 Get A/D filter: -9.255963e+061 result=40 00:31:26 Get A/D value=-858993460 result=40 00:31:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:26 Parameters OK 00:31:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:26 Set A/D data flow result=40 00:31:26 Set A/D channel type result=40 00:31:26 Set A/D encoding result=40 00:31:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:26 Set channel filter=0.000000e+000 result=40 00:31:26 Config A/D Result=40 00:31:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:26 Get A/D filter: -9.255963e+061 result=40 00:31:26 Get A/D value=-858993460 result=40 00:31:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:31:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:31:26 Aux= 00:31:26 Message to Camera, serial 256456 queued 00:31:34 Received message from Master: op=Shutter serial=256466 00:31:34 Shutter LASER close 00:31:35 Received message from Master: op=PointingHead serial=256470 00:31:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:31:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:31:35 Point started: ret=0 00:31:35 point_skyscan result=0 00:31:36 Check angles 00:31:36 SkyScan query 00:31:36 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.415<-21561 Statuses=0009 0009 00:31:36 Msec=0 True Az=135.9 Ze=-143.415 Az status=0009 Ze status=0009 00:31:37 Check angles 00:31:37 SkyScan query 00:31:37 SkyScan query done: ret=0 az=153.405<-10227 ze=-122.49<-20166 Statuses=0009 0009 00:31:37 Msec=750 True Az=153.405 Ze=-122.49 Az status=0009 Ze status=0009 00:31:37 Check angles 00:31:37 SkyScan query 00:31:38 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.55<-18770 Statuses=0009 0009 00:31:38 Msec=1500 True Az=170.805 Ze=-101.55 Az status=0009 Ze status=0009 00:31:38 Check angles 00:31:38 SkyScan query 00:31:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.52<-17368 Statuses=0008 0009 00:31:39 Msec=2250 True Az=176.01 Ze=-80.52 Az status=0008 Ze status=0009 00:31:39 Check angles 00:31:39 SkyScan query 00:31:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.595<-15973 Statuses=0008 0009 00:31:39 Msec=3000 True Az=176.01 Ze=-59.595 Az status=0008 Ze status=0009 00:31:40 Check angles 00:31:40 SkyScan query 00:31:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:31:40 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:31:40 Message to Master queued w/err=0: serial=256470 error=0 00:31:45 Received message from Master: op=Filter serial=256471 00:31:45 Color wheel filter change from 0 to 0 00:31:45 FLIGetFilterPos err=0 currentPosition=0 00:31:45 FLIGetStepsRemaining err=0 RemainingSteps=0 00:31:45 Filter is already there-color wheel unchanged 00:31:45 Received message from Master: op=Shutter serial=256472 00:31:45 Shutter LASER close 00:31:46 Received message from Camera: op=State serial=256474 00:31:46 GetSingleValue result=40 Value=cccccccc 00:31:46 SkyScan query 00:31:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:31:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:46 Parameters OK 00:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:46 Set A/D data flow result=40 00:31:46 Set A/D channel type result=40 00:31:46 Set A/D encoding result=40 00:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:46 Set channel filter=0.000000e+000 result=40 00:31:46 Config A/D Result=40 00:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:46 Get A/D filter: -9.255963e+061 result=40 00:31:46 Get A/D value=-858993460 result=40 00:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:46 Parameters OK 00:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:46 Set A/D data flow result=40 00:31:46 Set A/D channel type result=40 00:31:46 Set A/D encoding result=40 00:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:46 Set channel filter=0.000000e+000 result=40 00:31:46 Config A/D Result=40 00:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:46 Get A/D filter: -9.255963e+061 result=40 00:31:46 Get A/D value=-858993460 result=40 00:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:31:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:31:46 Aux= 00:31:46 Message to Camera, serial 256474 queued 00:32:23 Received message from Master: op=PointingHead serial=256487 00:32:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:32:23 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:32:23 Point started: ret=0 00:32:23 point_skyscan result=0 00:32:24 Check angles 00:32:24 SkyScan query 00:32:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-22.02<-13468 Statuses=0008 0009 00:32:25 Msec=0 True Az=175.995 Ze=-22.02 Az status=0008 Ze status=0009 00:32:25 Check angles 00:32:25 SkyScan query 00:32:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-1.035<-12069 Statuses=0008 0009 00:32:25 Msec=750 True Az=175.995 Ze=-1.035 Az status=0008 Ze status=0009 00:32:26 Check angles 00:32:26 SkyScan query 00:32:26 SkyScan query done: ret=0 az=175.995<-11733 ze=19.905<-10673 Statuses=0008 0009 00:32:26 Msec=1500 True Az=175.995 Ze=19.905 Az status=0008 Ze status=0009 00:32:26 Check angles 00:32:26 SkyScan query 00:32:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0009 00:32:27 Msec=2250 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0009 00:32:27 Check angles 00:32:27 SkyScan query 00:32:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 00:32:28 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 00:32:28 Message to Master queued w/err=0: serial=256487 error=0 00:32:33 Received message from Master: op=Filter serial=256488 00:32:33 Color wheel filter change from 0 to 0 00:32:33 FLIGetFilterPos err=0 currentPosition=0 00:32:33 FLIGetStepsRemaining err=0 RemainingSteps=0 00:32:33 Filter is already there-color wheel unchanged 00:32:33 Received message from Master: op=Shutter serial=256489 00:32:33 Shutter LASER close 00:32:33 Received message from Camera: op=State serial=256491 00:32:33 GetSingleValue result=40 Value=cccccccc 00:32:33 SkyScan query 00:32:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:32:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:34 Parameters OK 00:32:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:34 Set A/D data flow result=40 00:32:34 Set A/D channel type result=40 00:32:34 Set A/D encoding result=40 00:32:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:34 Set channel filter=0.000000e+000 result=40 00:32:34 Config A/D Result=40 00:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:34 Get A/D filter: -9.255963e+061 result=40 00:32:34 Get A/D value=-858993460 result=40 00:32:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:34 Parameters OK 00:32:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:34 Set A/D data flow result=40 00:32:34 Set A/D channel type result=40 00:32:34 Set A/D encoding result=40 00:32:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:34 Set channel filter=0.000000e+000 result=40 00:32:34 Config A/D Result=40 00:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:34 Get A/D filter: -9.255963e+061 result=40 00:32:34 Get A/D value=-858993460 result=40 00:32:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:32:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:32:34 Aux= 00:32:34 Message to Camera, serial 256491 queued 00:33:10 Received message from Master: op=PointingHead serial=256504 00:33:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:33:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:33:11 Point started: ret=0 00:33:11 point_skyscan result=0 00:33:11 Check angles 00:33:11 SkyScan query 00:33:12 SkyScan query done: ret=0 az=153.18<-10212 ze=8.925<-11405 Statuses=0009 0009 00:33:12 Msec=0 True Az=153.18 Ze=8.925 Az status=0009 Ze status=0009 00:33:12 Check angles 00:33:12 SkyScan query 00:33:13 SkyScan query done: ret=0 az=135.78<-9052 ze=-12<-12800 Statuses=0009 0009 00:33:13 Msec=750 True Az=135.78 Ze=-12 Az status=0009 Ze status=0009 00:33:13 Check angles 00:33:13 SkyScan query 00:33:14 SkyScan query done: ret=0 az=118.245<-7883 ze=-33<-14200 Statuses=0009 0009 00:33:14 Msec=1500 True Az=118.245 Ze=-33 Az status=0009 Ze status=0009 00:33:14 Check angles 00:33:14 SkyScan query 00:33:14 SkyScan query done: ret=0 az=100.785<-6719 ze=-51.51<-15434 Statuses=0009 0009 00:33:14 Msec=2250 True Az=100.785 Ze=-51.51 Az status=0009 Ze status=0009 00:33:14 Check angles 00:33:14 SkyScan query 00:33:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 00:33:15 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 00:33:15 Check angles 00:33:15 SkyScan query 00:33:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:33:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:33:16 Message to Master queued w/err=0: serial=256504 error=0 00:33:21 Received message from Master: op=Filter serial=256505 00:33:21 Color wheel filter change from 0 to 0 00:33:21 FLIGetFilterPos err=0 currentPosition=0 00:33:21 FLIGetStepsRemaining err=0 RemainingSteps=0 00:33:21 Filter is already there-color wheel unchanged 00:33:21 Received message from Master: op=Shutter serial=256506 00:33:21 Shutter LASER close 00:33:21 Received message from Camera: op=State serial=256508 00:33:21 GetSingleValue result=40 Value=cccccccc 00:33:21 SkyScan query 00:33:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:33:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:22 Parameters OK 00:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:22 Set A/D data flow result=40 00:33:22 Set A/D channel type result=40 00:33:22 Set A/D encoding result=40 00:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:22 Set channel filter=0.000000e+000 result=40 00:33:22 Config A/D Result=40 00:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:22 Get A/D filter: -9.255963e+061 result=40 00:33:22 Get A/D value=-858993460 result=40 00:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:22 Parameters OK 00:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:22 Set A/D data flow result=40 00:33:22 Set A/D channel type result=40 00:33:22 Set A/D encoding result=40 00:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:22 Set channel filter=0.000000e+000 result=40 00:33:22 Config A/D Result=40 00:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:22 Get A/D filter: -9.255963e+061 result=40 00:33:22 Get A/D value=-858993460 result=40 00:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:33:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:33:22 Aux= 00:33:22 Message to Camera, serial 256508 queued 00:33:58 Received message from Master: op=PointingHead serial=256521 00:33:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:33:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:33:59 Point started: ret=0 00:33:59 point_skyscan result=0 00:34:00 Check angles 00:34:00 SkyScan query 00:34:00 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.015<-17401 Statuses=0009 0009 00:34:00 Msec=0 True Az=108.84 Ze=-81.015 Az status=0009 Ze status=0009 00:34:00 Check angles 00:34:00 SkyScan query 00:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 00:34:01 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 00:34:01 Check angles 00:34:01 SkyScan query 00:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 00:34:02 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 00:34:02 Check angles 00:34:02 SkyScan query 00:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.85<-21590 Statuses=0008 0009 00:34:02 Msec=2250 True Az=112.995 Ze=-143.85 Az status=0008 Ze status=0009 00:34:03 Check angles 00:34:03 SkyScan query 00:34:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.805<-22987 Statuses=0008 0009 00:34:03 Msec=3000 True Az=112.995 Ze=-164.805 Az status=0008 Ze status=0009 00:34:03 Check angles 00:34:03 SkyScan query 00:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:34:04 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:34:04 Message to Master queued w/err=0: serial=256521 error=0 00:34:09 Received message from Master: op=Filter serial=256522 00:34:09 Color wheel filter change from 0 to 0 00:34:09 FLIGetFilterPos err=0 currentPosition=0 00:34:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:34:09 Filter is already there-color wheel unchanged 00:34:09 Received message from Master: op=Shutter serial=256523 00:34:09 Shutter LASER open 00:34:09 Received message from Camera: op=State serial=256525 00:34:09 GetSingleValue result=40 Value=cccccccc 00:34:09 SkyScan query 00:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:34:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:10 Parameters OK 00:34:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:10 Set A/D data flow result=40 00:34:10 Set A/D channel type result=40 00:34:10 Set A/D encoding result=40 00:34:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:10 Set channel filter=0.000000e+000 result=40 00:34:10 Config A/D Result=40 00:34:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:10 Get A/D filter: -9.255963e+061 result=40 00:34:10 Get A/D value=-858993460 result=40 00:34:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:10 Parameters OK 00:34:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:10 Set A/D data flow result=40 00:34:10 Set A/D channel type result=40 00:34:10 Set A/D encoding result=40 00:34:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:10 Set channel filter=0.000000e+000 result=40 00:34:10 Config A/D Result=40 00:34:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:10 Get A/D filter: -9.255963e+061 result=40 00:34:10 Get A/D value=-858993460 result=40 00:34:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:34:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:34:10 Aux= 00:34:10 Message to Camera, serial 256525 queued 00:34:18 Received message from Master: op=Shutter serial=256535 00:34:18 Shutter LASER close 00:34:19 Received message from Master: op=PointingHead serial=256539 00:34:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:34:19 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:34:19 Point started: ret=0 00:34:19 point_skyscan result=0 00:34:20 Check angles 00:34:20 SkyScan query 00:34:20 SkyScan query done: ret=0 az=90.165<-6011 ze=157.5<-1500 Statuses=0009 0009 00:34:20 Msec=0 True Az=90.165 Ze=157.5 Az status=0009 Ze status=0009 00:34:21 Check angles 00:34:21 SkyScan query 00:34:21 SkyScan query done: ret=0 az=72.705<-4847 ze=136.515<-2899 Statuses=0009 0009 00:34:21 Msec=750 True Az=72.705 Ze=136.515 Az status=0009 Ze status=0009 00:34:21 Check angles 00:34:21 SkyScan query 00:34:22 SkyScan query done: ret=0 az=55.29<-3686 ze=115.635<-4291 Statuses=0009 0009 00:34:22 Msec=1500 True Az=55.29 Ze=115.635 Az status=0009 Ze status=0009 00:34:22 Check angles 00:34:22 SkyScan query 00:34:23 SkyScan query done: ret=0 az=40.965<-2731 ze=94.605<-5693 Statuses=0009 0009 00:34:23 Msec=2250 True Az=40.965 Ze=94.605 Az status=0009 Ze status=0009 00:34:23 Check angles 00:34:23 SkyScan query 00:34:23 SkyScan query done: ret=0 az=40.995<-2733 ze=73.725<-7085 Statuses=0008 0009 00:34:23 Msec=3000 True Az=40.995 Ze=73.725 Az status=0008 Ze status=0009 00:34:24 Check angles 00:34:24 SkyScan query 00:34:24 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 00:34:24 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 00:34:24 Check angles 00:34:24 SkyScan query 00:34:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:34:25 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:34:25 Message to Master queued w/err=0: serial=256539 error=0 00:34:30 Received message from Master: op=Filter serial=256540 00:34:30 Color wheel filter change from 0 to 0 00:34:30 FLIGetFilterPos err=0 currentPosition=0 00:34:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:34:30 Filter is already there-color wheel unchanged 00:34:30 Received message from Master: op=Shutter serial=256541 00:34:30 Shutter LASER close 00:34:30 Received message from Camera: op=State serial=256543 00:34:30 GetSingleValue result=40 Value=cccccccc 00:34:30 SkyScan query 00:34:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:34:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:31 Parameters OK 00:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:31 Set A/D data flow result=40 00:34:31 Set A/D channel type result=40 00:34:31 Set A/D encoding result=40 00:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:31 Set channel filter=0.000000e+000 result=40 00:34:31 Config A/D Result=40 00:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:31 Get A/D filter: -9.255963e+061 result=40 00:34:31 Get A/D value=-858993460 result=40 00:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:31 Parameters OK 00:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:31 Set A/D data flow result=40 00:34:31 Set A/D channel type result=40 00:34:31 Set A/D encoding result=40 00:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:31 Set channel filter=0.000000e+000 result=40 00:34:31 Config A/D Result=40 00:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:31 Get A/D filter: -9.255963e+061 result=40 00:34:31 Get A/D value=-858993460 result=40 00:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:34:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:34:31 Aux= 00:34:31 Message to Camera, serial 256543 queued 00:35:08 Received message from Master: op=PointingHead serial=256556 00:35:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:35:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:35:08 Point started: ret=0 00:35:08 point_skyscan result=0 00:35:09 Check angles 00:35:09 SkyScan query 00:35:09 SkyScan query done: ret=0 az=63.885<-4259 ze=66.54<-7564 Statuses=0009 0008 00:35:09 Msec=0 True Az=63.885 Ze=66.54 Az status=0009 Ze status=0008 00:35:09 Check angles 00:35:09 SkyScan query 00:35:10 SkyScan query done: ret=0 az=81.675<-5445 ze=66.51<-7566 Statuses=0009 0008 00:35:10 Msec=750 True Az=81.675 Ze=66.51 Az status=0009 Ze status=0008 00:35:10 Check angles 00:35:10 SkyScan query 00:35:11 SkyScan query done: ret=0 az=99.33<-6622 ze=66.495<-7567 Statuses=0009 0008 00:35:11 Msec=1500 True Az=99.33 Ze=66.495 Az status=0009 Ze status=0008 00:35:11 Check angles 00:35:11 SkyScan query 00:35:12 SkyScan query done: ret=0 az=116.715<-7781 ze=66.495<-7567 Statuses=0009 0008 00:35:12 Msec=2250 True Az=116.715 Ze=66.495 Az status=0009 Ze status=0008 00:35:12 Check angles 00:35:12 SkyScan query 00:35:12 SkyScan query done: ret=0 az=134.01<-8934 ze=66.495<-7567 Statuses=0009 0008 00:35:12 Msec=3000 True Az=134.01 Ze=66.495 Az status=0009 Ze status=0008 00:35:12 Check angles 00:35:12 SkyScan query 00:35:13 SkyScan query done: ret=0 az=151.53<-10102 ze=66.495<-7567 Statuses=0009 0008 00:35:13 Msec=3750 True Az=151.53 Ze=66.495 Az status=0009 Ze status=0008 00:35:13 Check angles 00:35:13 SkyScan query 00:35:14 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:35:14 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:35:14 Message to Master queued w/err=0: serial=256556 error=0 00:35:19 Received message from Master: op=Filter serial=256557 00:35:19 Color wheel filter change from 0 to 0 00:35:19 FLIGetFilterPos err=0 currentPosition=0 00:35:19 FLIGetStepsRemaining err=0 RemainingSteps=0 00:35:19 Filter is already there-color wheel unchanged 00:35:19 Received message from Master: op=Shutter serial=256558 00:35:19 Shutter LASER close 00:35:19 Received message from Camera: op=State serial=256560 00:35:19 GetSingleValue result=40 Value=cccccccc 00:35:19 SkyScan query 00:35:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:35:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:20 Parameters OK 00:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:20 Set A/D data flow result=40 00:35:20 Set A/D channel type result=40 00:35:20 Set A/D encoding result=40 00:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:20 Set channel filter=0.000000e+000 result=40 00:35:20 Config A/D Result=40 00:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:20 Get A/D filter: -9.255963e+061 result=40 00:35:20 Get A/D value=-858993460 result=40 00:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:20 Parameters OK 00:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:20 Set A/D data flow result=40 00:35:20 Set A/D channel type result=40 00:35:20 Set A/D encoding result=40 00:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:20 Set channel filter=0.000000e+000 result=40 00:35:20 Config A/D Result=40 00:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:20 Get A/D filter: -9.255963e+061 result=40 00:35:20 Get A/D value=-858993460 result=40 00:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:35:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:35:20 Aux= 00:35:20 Message to Camera, serial 256560 queued [UTC 2018-12-19 00:35:52] 00:35:56 Received message from Master: op=PointingHead serial=256573 00:35:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:35:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:35:57 Point started: ret=0 00:35:57 point_skyscan result=0 00:35:58 Check angles 00:35:58 SkyScan query 00:35:58 SkyScan query done: ret=0 az=135.09<-9006 ze=36.81<-9546 Statuses=0009 0009 00:35:58 Msec=0 True Az=135.09 Ze=36.81 Az status=0009 Ze status=0009 00:35:58 Check angles 00:35:58 SkyScan query 00:35:59 SkyScan query done: ret=0 az=117.525<-7835 ze=15.84<-10944 Statuses=0009 0009 00:35:59 Msec=750 True Az=117.525 Ze=15.84 Az status=0009 Ze status=0009 00:35:59 Check angles 00:35:59 SkyScan query 00:36:00 SkyScan query done: ret=0 az=99.705<-6647 ze=-5.505<-12367 Statuses=0009 0009 00:36:00 Msec=1500 True Az=99.705 Ze=-5.505 Az status=0009 Ze status=0009 00:36:00 Check angles 00:36:00 SkyScan query 00:36:00 SkyScan query done: ret=0 az=82.365<-5491 ze=-26.445<-13763 Statuses=0009 0009 00:36:00 Msec=2250 True Az=82.365 Ze=-26.445 Az status=0009 Ze status=0009 00:36:01 Check angles 00:36:01 SkyScan query 00:36:01 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.58<-14572 Statuses=0009 0008 00:36:01 Msec=3000 True Az=64.695 Ze=-38.58 Az status=0009 Ze status=0008 00:36:01 Check angles 00:36:01 SkyScan query 00:36:02 SkyScan query done: ret=0 az=47.385<-3159 ze=-38.52<-14568 Statuses=0009 0008 00:36:02 Msec=3750 True Az=47.385 Ze=-38.52 Az status=0009 Ze status=0008 00:36:02 Check angles 00:36:02 SkyScan query 00:36:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:36:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:36:03 Message to Master queued w/err=0: serial=256573 error=0 00:36:08 Received message from Master: op=Filter serial=256574 00:36:08 Color wheel filter change from 0 to 0 00:36:08 FLIGetFilterPos err=0 currentPosition=0 00:36:08 FLIGetStepsRemaining err=0 RemainingSteps=0 00:36:08 Filter is already there-color wheel unchanged 00:36:08 Received message from Master: op=Shutter serial=256575 00:36:08 Shutter LASER close 00:36:08 Received message from Camera: op=State serial=256577 00:36:08 GetSingleValue result=40 Value=cccccccc 00:36:08 SkyScan query 00:36:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:36:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:08 Parameters OK 00:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:08 Set A/D data flow result=40 00:36:08 Set A/D channel type result=40 00:36:08 Set A/D encoding result=40 00:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:08 Set channel filter=0.000000e+000 result=40 00:36:08 Config A/D Result=40 00:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:08 Get A/D filter: -9.255963e+061 result=40 00:36:08 Get A/D value=-858993460 result=40 00:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:08 Parameters OK 00:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:08 Set A/D data flow result=40 00:36:08 Set A/D channel type result=40 00:36:08 Set A/D encoding result=40 00:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:08 Set channel filter=0.000000e+000 result=40 00:36:08 Config A/D Result=40 00:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:08 Get A/D filter: -9.255963e+061 result=40 00:36:08 Get A/D value=-858993460 result=40 00:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:36:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:36:08 Aux= 00:36:08 Message to Camera, serial 256577 queued 00:36:45 Received message from Master: op=PointingHead serial=256590 00:36:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:36:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:36:46 Point started: ret=0 00:36:46 point_skyscan result=0 00:36:46 Check angles 00:36:46 SkyScan query 00:36:47 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.49<-16566 Statuses=0009 0009 00:36:47 Msec=0 True Az=64.2 Ze=-68.49 Az status=0009 Ze status=0009 00:36:47 Check angles 00:36:47 SkyScan query 00:36:48 SkyScan query done: ret=0 az=82.095<-5473 ze=-89.91<-17994 Statuses=0009 0009 00:36:48 Msec=750 True Az=82.095 Ze=-89.91 Az status=0009 Ze status=0009 00:36:48 Check angles 00:36:48 SkyScan query 00:36:48 SkyScan query done: ret=0 az=100.095<-6673 ze=-111.27<-19418 Statuses=0009 0009 00:36:48 Msec=1500 True Az=100.095 Ze=-111.27 Az status=0009 Ze status=0009 00:36:49 Check angles 00:36:49 SkyScan query 00:36:49 SkyScan query done: ret=0 az=117.525<-7835 ze=-132.21<-20814 Statuses=0009 0009 00:36:49 Msec=2250 True Az=117.525 Ze=-132.21 Az status=0009 Ze status=0009 00:36:49 Check angles 00:36:49 SkyScan query 00:36:50 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 00:36:50 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 00:36:50 Check angles 00:36:50 SkyScan query 00:36:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 00:36:51 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 00:36:51 Message to Master queued w/err=0: serial=256590 error=0 00:36:56 Received message from Master: op=Filter serial=256591 00:36:56 Color wheel filter change from 0 to 0 00:36:56 FLIGetFilterPos err=0 currentPosition=0 00:36:56 FLIGetStepsRemaining err=0 RemainingSteps=0 00:36:56 Filter is already there-color wheel unchanged 00:36:56 Received message from Master: op=Shutter serial=256592 00:36:56 Shutter LASER close 00:36:56 Received message from Camera: op=State serial=256594 00:36:56 GetSingleValue result=40 Value=cccccccc 00:36:56 SkyScan query 00:36:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:36:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:57 Parameters OK 00:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:57 Set A/D data flow result=40 00:36:57 Set A/D channel type result=40 00:36:57 Set A/D encoding result=40 00:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:57 Set channel filter=0.000000e+000 result=40 00:36:57 Config A/D Result=40 00:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:57 Get A/D filter: -9.255963e+061 result=40 00:36:57 Get A/D value=-858993460 result=40 00:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:57 Parameters OK 00:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:57 Set A/D data flow result=40 00:36:57 Set A/D channel type result=40 00:36:57 Set A/D encoding result=40 00:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:57 Set channel filter=0.000000e+000 result=40 00:36:57 Config A/D Result=40 00:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:57 Get A/D filter: -9.255963e+061 result=40 00:36:57 Get A/D value=-858993460 result=40 00:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:36:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:36:57 Aux= 00:36:57 Message to Camera, serial 256594 queued 00:37:32 Received message from Master: op=PointingHead serial=256606 00:37:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:37:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:37:33 Point started: ret=0 00:37:33 point_skyscan result=0 00:37:33 Check angles 00:37:33 SkyScan query 00:37:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 00:37:34 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 00:37:34 Check angles 00:37:34 SkyScan query 00:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:37:35 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:37:35 Message to Master queued w/err=0: serial=256606 error=0 00:37:40 Received message from Master: op=Filter serial=256607 00:37:40 Color wheel filter change from 0 to 0 00:37:40 FLIGetFilterPos err=0 currentPosition=0 00:37:40 FLIGetStepsRemaining err=0 RemainingSteps=0 00:37:40 Filter is already there-color wheel unchanged 00:37:40 Received message from Master: op=Shutter serial=256608 00:37:40 Shutter LASER open 00:37:40 Received message from Camera: op=State serial=256610 00:37:40 GetSingleValue result=40 Value=cccccccc 00:37:40 SkyScan query 00:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:37:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:41 Parameters OK 00:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:41 Set A/D data flow result=40 00:37:41 Set A/D channel type result=40 00:37:41 Set A/D encoding result=40 00:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:41 Set channel filter=0.000000e+000 result=40 00:37:41 Config A/D Result=40 00:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:41 Get A/D filter: -9.255963e+061 result=40 00:37:41 Get A/D value=-858993460 result=40 00:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:41 Parameters OK 00:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:41 Set A/D data flow result=40 00:37:41 Set A/D channel type result=40 00:37:41 Set A/D encoding result=40 00:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:41 Set channel filter=0.000000e+000 result=40 00:37:41 Config A/D Result=40 00:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:41 Get A/D filter: -9.255963e+061 result=40 00:37:41 Get A/D value=-858993460 result=40 00:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:37:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:37:41 Aux= 00:37:41 Message to Camera, serial 256610 queued 00:37:49 Received message from Master: op=Shutter serial=256620 00:37:49 Shutter LASER close 00:37:50 Received message from Master: op=PointingHead serial=256624 00:37:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:37:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:37:50 Point started: ret=0 00:37:50 point_skyscan result=0 00:37:51 Check angles 00:37:51 SkyScan query 00:37:51 SkyScan query done: ret=0 az=135.66<-9044 ze=-143.55<-21570 Statuses=0009 0009 00:37:51 Msec=0 True Az=135.66 Ze=-143.55 Az status=0009 Ze status=0009 00:37:52 Check angles 00:37:52 SkyScan query 00:37:52 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.13<-20142 Statuses=0009 0009 00:37:52 Msec=750 True Az=153.495 Ze=-122.13 Az status=0009 Ze status=0009 00:37:52 Check angles 00:37:52 SkyScan query 00:37:53 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.68<-18712 Statuses=0009 0009 00:37:53 Msec=1500 True Az=171.36 Ze=-100.68 Az status=0009 Ze status=0009 00:37:53 Check angles 00:37:53 SkyScan query 00:37:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.785<-17319 Statuses=0008 0009 00:37:54 Msec=2250 True Az=176.01 Ze=-79.785 Az status=0008 Ze status=0009 00:37:54 Check angles 00:37:54 SkyScan query 00:37:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.8<-15920 Statuses=0008 0009 00:37:54 Msec=3000 True Az=176.01 Ze=-58.8 Az status=0008 Ze status=0009 00:37:55 Check angles 00:37:55 SkyScan query 00:37:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 00:37:55 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 00:37:55 Message to Master queued w/err=0: serial=256624 error=0 00:38:00 Received message from Master: op=Filter serial=256625 00:38:00 Color wheel filter change from 0 to 0 00:38:00 FLIGetFilterPos err=0 currentPosition=0 00:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 00:38:00 Filter is already there-color wheel unchanged 00:38:00 Received message from Master: op=Shutter serial=256626 00:38:00 Shutter LASER close 00:38:01 Received message from Camera: op=State serial=256628 00:38:01 GetSingleValue result=40 Value=cccccccc 00:38:01 SkyScan query 00:38:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:01 Parameters OK 00:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:01 Set A/D data flow result=40 00:38:01 Set A/D channel type result=40 00:38:01 Set A/D encoding result=40 00:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:01 Set channel filter=0.000000e+000 result=40 00:38:01 Config A/D Result=40 00:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:01 Get A/D filter: -9.255963e+061 result=40 00:38:01 Get A/D value=-858993460 result=40 00:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:01 Parameters OK 00:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:01 Set A/D data flow result=40 00:38:01 Set A/D channel type result=40 00:38:01 Set A/D encoding result=40 00:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:01 Set channel filter=0.000000e+000 result=40 00:38:01 Config A/D Result=40 00:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:01 Get A/D filter: -9.255963e+061 result=40 00:38:01 Get A/D value=-858993460 result=40 00:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:38:01 Aux= 00:38:01 Message to Camera, serial 256628 queued 00:38:38 Received message from Master: op=PointingHead serial=256641 00:38:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:38:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:38:38 Point started: ret=0 00:38:38 point_skyscan result=0 00:38:39 Check angles 00:38:39 SkyScan query 00:38:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.405<-13427 Statuses=0008 0009 00:38:40 Msec=0 True Az=175.995 Ze=-21.405 Az status=0008 Ze status=0009 00:38:40 Check angles 00:38:40 SkyScan query 00:38:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.435<-12029 Statuses=0008 0009 00:38:41 Msec=750 True Az=175.995 Ze=-0.435 Az status=0008 Ze status=0009 00:38:41 Check angles 00:38:41 SkyScan query 00:38:41 SkyScan query done: ret=0 az=175.995<-11733 ze=20.475<-10635 Statuses=0008 0009 00:38:41 Msec=1500 True Az=175.995 Ze=20.475 Az status=0008 Ze status=0009 00:38:41 Check angles 00:38:41 SkyScan query 00:38:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 00:38:42 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 00:38:42 Check angles 00:38:42 SkyScan query 00:38:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 00:38:43 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 00:38:43 Message to Master queued w/err=0: serial=256641 error=0 00:38:48 Received message from Master: op=Filter serial=256642 00:38:48 Color wheel filter change from 0 to 0 00:38:48 FLIGetFilterPos err=0 currentPosition=0 00:38:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:38:48 Filter is already there-color wheel unchanged 00:38:48 Received message from Master: op=Shutter serial=256643 00:38:48 Shutter LASER close 00:38:48 Received message from Camera: op=State serial=256645 00:38:48 GetSingleValue result=40 Value=cccccccc 00:38:48 SkyScan query 00:38:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:38:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:49 Parameters OK 00:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:49 Set A/D data flow result=40 00:38:49 Set A/D channel type result=40 00:38:49 Set A/D encoding result=40 00:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:49 Set channel filter=0.000000e+000 result=40 00:38:49 Config A/D Result=40 00:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:49 Get A/D filter: -9.255963e+061 result=40 00:38:49 Get A/D value=-858993460 result=40 00:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:49 Parameters OK 00:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:49 Set A/D data flow result=40 00:38:49 Set A/D channel type result=40 00:38:49 Set A/D encoding result=40 00:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:49 Set channel filter=0.000000e+000 result=40 00:38:49 Config A/D Result=40 00:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:49 Get A/D filter: -9.255963e+061 result=40 00:38:49 Get A/D value=-858993460 result=40 00:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:38:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:38:49 Aux= 00:38:49 Message to Camera, serial 256645 queued 00:39:25 Received message from Master: op=PointingHead serial=256658 00:39:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:39:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:39:26 Point started: ret=0 00:39:26 point_skyscan result=0 00:39:27 Check angles 00:39:27 SkyScan query 00:39:27 SkyScan query done: ret=0 az=152.955<-10197 ze=8.535<-11431 Statuses=0009 0009 00:39:27 Msec=0 True Az=152.955 Ze=8.535 Az status=0009 Ze status=0009 00:39:27 Check angles 00:39:27 SkyScan query 00:39:28 SkyScan query done: ret=0 az=135.06<-9004 ze=-12.87<-12858 Statuses=0009 0009 00:39:28 Msec=750 True Az=135.06 Ze=-12.87 Az status=0009 Ze status=0009 00:39:28 Check angles 00:39:28 SkyScan query 00:39:29 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.84<-14256 Statuses=0009 0009 00:39:29 Msec=1500 True Az=117.6 Ze=-33.84 Az status=0009 Ze status=0009 00:39:29 Check angles 00:39:29 SkyScan query 00:39:29 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.555<-15437 Statuses=0009 0009 00:39:29 Msec=2250 True Az=100.2 Ze=-51.555 Az status=0009 Ze status=0009 00:39:30 Check angles 00:39:30 SkyScan query 00:39:30 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 00:39:30 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 00:39:30 Check angles 00:39:30 SkyScan query 00:39:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:39:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:39:31 Message to Master queued w/err=0: serial=256658 error=0 00:39:36 Received message from Master: op=Filter serial=256659 00:39:36 Color wheel filter change from 0 to 0 00:39:36 FLIGetFilterPos err=0 currentPosition=0 00:39:36 FLIGetStepsRemaining err=0 RemainingSteps=0 00:39:36 Filter is already there-color wheel unchanged 00:39:36 Received message from Master: op=Shutter serial=256660 00:39:36 Shutter LASER close 00:39:36 Received message from Camera: op=State serial=256662 00:39:36 GetSingleValue result=40 Value=cccccccc 00:39:36 SkyScan query 00:39:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:39:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:37 Parameters OK 00:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:37 Set A/D data flow result=40 00:39:37 Set A/D channel type result=40 00:39:37 Set A/D encoding result=40 00:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:37 Set channel filter=0.000000e+000 result=40 00:39:37 Config A/D Result=40 00:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:37 Get A/D filter: -9.255963e+061 result=40 00:39:37 Get A/D value=-858993460 result=40 00:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:37 Parameters OK 00:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:37 Set A/D data flow result=40 00:39:37 Set A/D channel type result=40 00:39:37 Set A/D encoding result=40 00:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:37 Set channel filter=0.000000e+000 result=40 00:39:37 Config A/D Result=40 00:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:37 Get A/D filter: -9.255963e+061 result=40 00:39:37 Get A/D value=-858993460 result=40 00:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:39:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:39:37 Aux= 00:39:37 Message to Camera, serial 256662 queued 00:40:14 Received message from Master: op=PointingHead serial=256675 00:40:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:40:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:40:14 Point started: ret=0 00:40:14 point_skyscan result=0 00:40:15 Check angles 00:40:15 SkyScan query 00:40:15 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.45<-17430 Statuses=0009 0009 00:40:15 Msec=0 True Az=109.17 Ze=-81.45 Az status=0009 Ze status=0009 00:40:15 Check angles 00:40:15 SkyScan query 00:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.825<-18855 Statuses=0008 0009 00:40:16 Msec=750 True Az=112.995 Ze=-102.825 Az status=0008 Ze status=0009 00:40:16 Check angles 00:40:16 SkyScan query 00:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.765<-20251 Statuses=0008 0009 00:40:17 Msec=1500 True Az=112.995 Ze=-123.765 Az status=0008 Ze status=0009 00:40:17 Check angles 00:40:17 SkyScan query 00:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.155<-21677 Statuses=0008 0009 00:40:17 Msec=2250 True Az=112.995 Ze=-145.155 Az status=0008 Ze status=0009 00:40:18 Check angles 00:40:18 SkyScan query 00:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.56<-23104 Statuses=0008 0009 00:40:18 Msec=3000 True Az=112.995 Ze=-166.56 Az status=0008 Ze status=0009 00:40:18 Check angles 00:40:18 SkyScan query 00:40:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:40:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:40:19 Message to Master queued w/err=0: serial=256675 error=0 00:40:24 Received message from Master: op=Filter serial=256676 00:40:24 Color wheel filter change from 0 to 0 00:40:24 FLIGetFilterPos err=0 currentPosition=0 00:40:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:40:24 Filter is already there-color wheel unchanged 00:40:24 Received message from Master: op=Shutter serial=256677 00:40:24 Shutter LASER open 00:40:24 Received message from Camera: op=State serial=256679 00:40:24 GetSingleValue result=40 Value=cccccccc 00:40:24 SkyScan query 00:40:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:40:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:25 Parameters OK 00:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:25 Set A/D data flow result=40 00:40:25 Set A/D channel type result=40 00:40:25 Set A/D encoding result=40 00:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:25 Set channel filter=0.000000e+000 result=40 00:40:25 Config A/D Result=40 00:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:25 Get A/D filter: -9.255963e+061 result=40 00:40:25 Get A/D value=-858993460 result=40 00:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:25 Parameters OK 00:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:25 Set A/D data flow result=40 00:40:25 Set A/D channel type result=40 00:40:25 Set A/D encoding result=40 00:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:25 Set channel filter=0.000000e+000 result=40 00:40:25 Config A/D Result=40 00:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:25 Get A/D filter: -9.255963e+061 result=40 00:40:25 Get A/D value=-858993460 result=40 00:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:40:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:40:25 Aux= 00:40:25 Message to Camera, serial 256679 queued 00:40:33 Received message from Master: op=Shutter serial=256689 00:40:33 Shutter LASER close 00:40:34 Received message from Master: op=PointingHead serial=256693 00:40:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:40:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:40:34 Point started: ret=0 00:40:34 point_skyscan result=0 00:40:35 Check angles 00:40:35 SkyScan query 00:40:35 SkyScan query done: ret=0 az=89.865<-5991 ze=157.2<-1520 Statuses=0009 0009 00:40:35 Msec=0 True Az=89.865 Ze=157.2 Az status=0009 Ze status=0009 00:40:36 Check angles 00:40:36 SkyScan query 00:40:36 SkyScan query done: ret=0 az=72.03<-4802 ze=135.825<-2945 Statuses=0009 0009 00:40:36 Msec=750 True Az=72.03 Ze=135.825 Az status=0009 Ze status=0009 00:40:36 Check angles 00:40:36 SkyScan query 00:40:37 SkyScan query done: ret=0 az=54.585<-3639 ze=114.84<-4344 Statuses=0009 0009 00:40:37 Msec=1500 True Az=54.585 Ze=114.84 Az status=0009 Ze status=0009 00:40:37 Check angles 00:40:37 SkyScan query 00:40:38 SkyScan query done: ret=0 az=41.025<-2735 ze=93.9<-5740 Statuses=0009 0009 00:40:38 Msec=2250 True Az=41.025 Ze=93.9 Az status=0009 Ze status=0009 00:40:38 Check angles 00:40:38 SkyScan query 00:40:38 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 00:40:38 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 00:40:39 Check angles 00:40:39 SkyScan query 00:40:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 00:40:39 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 00:40:39 Check angles 00:40:39 SkyScan query 00:40:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:40:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:40:40 Message to Master queued w/err=0: serial=256693 error=0 00:40:45 Received message from Master: op=Filter serial=256694 00:40:45 Color wheel filter change from 0 to 0 00:40:45 FLIGetFilterPos err=0 currentPosition=0 00:40:45 FLIGetStepsRemaining err=0 RemainingSteps=0 00:40:45 Filter is already there-color wheel unchanged 00:40:45 Received message from Master: op=Shutter serial=256695 00:40:45 Shutter LASER close 00:40:45 Received message from Camera: op=State serial=256697 00:40:45 GetSingleValue result=40 Value=cccccccc 00:40:45 SkyScan query 00:40:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:40:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:46 Parameters OK 00:40:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:46 Set A/D data flow result=40 00:40:46 Set A/D channel type result=40 00:40:46 Set A/D encoding result=40 00:40:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:46 Set channel filter=0.000000e+000 result=40 00:40:46 Config A/D Result=40 00:40:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:46 Get A/D filter: -9.255963e+061 result=40 00:40:46 Get A/D value=-858993460 result=40 00:40:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:46 Parameters OK 00:40:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:46 Set A/D data flow result=40 00:40:46 Set A/D channel type result=40 00:40:46 Set A/D encoding result=40 00:40:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:46 Set channel filter=0.000000e+000 result=40 00:40:46 Config A/D Result=40 00:40:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:46 Get A/D filter: -9.255963e+061 result=40 00:40:46 Get A/D value=-858993460 result=40 00:40:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:40:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:40:46 Aux= 00:40:46 Message to Camera, serial 256697 queued 00:41:23 Received message from Master: op=PointingHead serial=256710 00:41:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:41:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:41:23 Point started: ret=0 00:41:23 point_skyscan result=0 00:41:24 Check angles 00:41:24 SkyScan query 00:41:24 SkyScan query done: ret=0 az=63.93<-4262 ze=66.54<-7564 Statuses=0009 0008 00:41:24 Msec=0 True Az=63.93 Ze=66.54 Az status=0009 Ze status=0008 00:41:25 Check angles 00:41:25 SkyScan query 00:41:25 SkyScan query done: ret=0 az=81.18<-5412 ze=66.51<-7566 Statuses=0009 0008 00:41:25 Msec=750 True Az=81.18 Ze=66.51 Az status=0009 Ze status=0008 00:41:25 Check angles 00:41:25 SkyScan query 00:41:26 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 00:41:26 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 00:41:26 Check angles 00:41:26 SkyScan query 00:41:27 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 00:41:27 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 00:41:27 Check angles 00:41:27 SkyScan query 00:41:27 SkyScan query done: ret=0 az=134.055<-8937 ze=66.495<-7567 Statuses=0009 0008 00:41:27 Msec=3000 True Az=134.055 Ze=66.495 Az status=0009 Ze status=0008 00:41:28 Check angles 00:41:28 SkyScan query 00:41:28 SkyScan query done: ret=0 az=151.815<-10121 ze=66.495<-7567 Statuses=0009 0008 00:41:28 Msec=3750 True Az=151.815 Ze=66.495 Az status=0009 Ze status=0008 00:41:28 Check angles 00:41:28 SkyScan query 00:41:29 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:41:29 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:41:29 Message to Master queued w/err=0: serial=256710 error=0 00:41:34 Received message from Master: op=Filter serial=256711 00:41:34 Color wheel filter change from 0 to 0 00:41:34 FLIGetFilterPos err=0 currentPosition=0 00:41:34 FLIGetStepsRemaining err=0 RemainingSteps=0 00:41:34 Filter is already there-color wheel unchanged 00:41:34 Received message from Master: op=Shutter serial=256712 00:41:34 Shutter LASER close 00:41:34 Received message from Camera: op=State serial=256714 00:41:34 GetSingleValue result=40 Value=cccccccc 00:41:34 SkyScan query 00:41:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:41:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:35 Parameters OK 00:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:35 Set A/D data flow result=40 00:41:35 Set A/D channel type result=40 00:41:35 Set A/D encoding result=40 00:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:35 Set channel filter=0.000000e+000 result=40 00:41:35 Config A/D Result=40 00:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:35 Get A/D filter: -9.255963e+061 result=40 00:41:35 Get A/D value=-858993460 result=40 00:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:35 Parameters OK 00:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:35 Set A/D data flow result=40 00:41:35 Set A/D channel type result=40 00:41:35 Set A/D encoding result=40 00:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:35 Set channel filter=0.000000e+000 result=40 00:41:35 Config A/D Result=40 00:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:35 Get A/D filter: -9.255963e+061 result=40 00:41:35 Get A/D value=-858993460 result=40 00:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:41:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:41:35 Aux= 00:41:35 Message to Camera, serial 256714 queued 00:42:12 Received message from Master: op=PointingHead serial=256727 00:42:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:42:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:42:12 Point started: ret=0 00:42:12 point_skyscan result=0 00:42:13 Check angles 00:42:13 SkyScan query 00:42:13 SkyScan query done: ret=0 az=135.045<-9003 ze=36.75<-9550 Statuses=0009 0009 00:42:13 Msec=0 True Az=135.045 Ze=36.75 Az status=0009 Ze status=0009 00:42:13 Check angles 00:42:13 SkyScan query 00:42:14 SkyScan query done: ret=0 az=117.555<-7837 ze=15.735<-10951 Statuses=0009 0009 00:42:14 Msec=750 True Az=117.555 Ze=15.735 Az status=0009 Ze status=0009 00:42:14 Check angles 00:42:14 SkyScan query 00:42:15 SkyScan query done: ret=0 az=100.185<-6679 ze=-5.16<-12344 Statuses=0009 0009 00:42:15 Msec=1500 True Az=100.185 Ze=-5.16 Az status=0009 Ze status=0009 00:42:15 Check angles 00:42:15 SkyScan query 00:42:16 SkyScan query done: ret=0 az=82.635<-5509 ze=-26.145<-13743 Statuses=0009 0009 00:42:16 Msec=2250 True Az=82.635 Ze=-26.145 Az status=0009 Ze status=0009 00:42:16 Check angles 00:42:16 SkyScan query 00:42:16 SkyScan query done: ret=0 az=65.175<-4345 ze=-38.565<-14571 Statuses=0009 0008 00:42:16 Msec=3000 True Az=65.175 Ze=-38.565 Az status=0009 Ze status=0008 00:42:16 Check angles 00:42:16 SkyScan query 00:42:17 SkyScan query done: ret=0 az=47.7<-3180 ze=-38.535<-14569 Statuses=0009 0008 00:42:17 Msec=3750 True Az=47.7 Ze=-38.535 Az status=0009 Ze status=0008 00:42:17 Check angles 00:42:17 SkyScan query 00:42:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:42:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:42:18 Message to Master queued w/err=0: serial=256727 error=0 00:42:23 Received message from Master: op=Filter serial=256728 00:42:23 Color wheel filter change from 0 to 0 00:42:23 FLIGetFilterPos err=0 currentPosition=0 00:42:23 FLIGetStepsRemaining err=0 RemainingSteps=0 00:42:23 Filter is already there-color wheel unchanged 00:42:23 Received message from Master: op=Shutter serial=256729 00:42:23 Shutter LASER close 00:42:23 Received message from Camera: op=State serial=256731 00:42:23 GetSingleValue result=40 Value=cccccccc 00:42:23 SkyScan query 00:42:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:42:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:24 Parameters OK 00:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:24 Set A/D data flow result=40 00:42:24 Set A/D channel type result=40 00:42:24 Set A/D encoding result=40 00:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:24 Set channel filter=0.000000e+000 result=40 00:42:24 Config A/D Result=40 00:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:24 Get A/D filter: -9.255963e+061 result=40 00:42:24 Get A/D value=-858993460 result=40 00:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:24 Parameters OK 00:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:24 Set A/D data flow result=40 00:42:24 Set A/D channel type result=40 00:42:24 Set A/D encoding result=40 00:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:24 Set channel filter=0.000000e+000 result=40 00:42:24 Config A/D Result=40 00:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:24 Get A/D filter: -9.255963e+061 result=40 00:42:24 Get A/D value=-858993460 result=40 00:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:42:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:42:24 Aux= 00:42:24 Message to Camera, serial 256731 queued 00:43:01 Received message from Master: op=PointingHead serial=256744 00:43:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:43:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:43:01 Point started: ret=0 00:43:01 point_skyscan result=0 00:43:02 Check angles 00:43:02 SkyScan query 00:43:02 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.49<-16566 Statuses=0009 0009 00:43:02 Msec=0 True Az=64.17 Ze=-68.49 Az status=0009 Ze status=0009 00:43:02 Check angles 00:43:02 SkyScan query 00:43:03 SkyScan query done: ret=0 az=81.675<-5445 ze=-89.49<-17966 Statuses=0009 0009 00:43:03 Msec=750 True Az=81.675 Ze=-89.49 Az status=0009 Ze status=0009 00:43:03 Check angles 00:43:03 SkyScan query 00:43:04 SkyScan query done: ret=0 az=99.555<-6637 ze=-110.88<-19392 Statuses=0009 0009 00:43:04 Msec=1500 True Az=99.555 Ze=-110.88 Az status=0009 Ze status=0009 00:43:04 Check angles 00:43:04 SkyScan query 00:43:05 SkyScan query done: ret=0 az=117.51<-7834 ze=-132.225<-20815 Statuses=0009 0009 00:43:05 Msec=2250 True Az=117.51 Ze=-132.225 Az status=0009 Ze status=0009 00:43:05 Check angles 00:43:05 SkyScan query 00:43:05 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 00:43:05 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 00:43:05 Check angles 00:43:05 SkyScan query 00:43:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:43:06 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:43:06 Message to Master queued w/err=0: serial=256744 error=0 00:43:11 Received message from Master: op=Filter serial=256745 00:43:11 Color wheel filter change from 0 to 0 00:43:11 FLIGetFilterPos err=0 currentPosition=0 00:43:11 FLIGetStepsRemaining err=0 RemainingSteps=0 00:43:11 Filter is already there-color wheel unchanged 00:43:11 Received message from Master: op=Shutter serial=256746 00:43:11 Shutter LASER close 00:43:11 Received message from Camera: op=State serial=256748 00:43:11 GetSingleValue result=40 Value=cccccccc 00:43:11 SkyScan query 00:43:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:43:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:12 Parameters OK 00:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:12 Set A/D data flow result=40 00:43:12 Set A/D channel type result=40 00:43:12 Set A/D encoding result=40 00:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:12 Set channel filter=0.000000e+000 result=40 00:43:12 Config A/D Result=40 00:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:12 Get A/D filter: -9.255963e+061 result=40 00:43:12 Get A/D value=-858993460 result=40 00:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:12 Parameters OK 00:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:12 Set A/D data flow result=40 00:43:12 Set A/D channel type result=40 00:43:12 Set A/D encoding result=40 00:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:12 Set channel filter=0.000000e+000 result=40 00:43:12 Config A/D Result=40 00:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:12 Get A/D filter: -9.255963e+061 result=40 00:43:12 Get A/D value=-858993460 result=40 00:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:43:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:43:12 Aux= 00:43:12 Message to Camera, serial 256748 queued 00:43:49 Received message from Master: op=PointingHead serial=256761 00:43:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:43:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:43:49 Point started: ret=0 00:43:49 point_skyscan result=0 00:43:50 Check angles 00:43:50 SkyScan query 00:43:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 00:43:50 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 00:43:50 Check angles 00:43:50 SkyScan query 00:43:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:43:51 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:43:51 Message to Master queued w/err=0: serial=256761 error=0 00:43:56 Received message from Master: op=Filter serial=256762 00:43:56 Color wheel filter change from 0 to 0 00:43:56 FLIGetFilterPos err=0 currentPosition=0 00:43:56 FLIGetStepsRemaining err=0 RemainingSteps=0 00:43:56 Filter is already there-color wheel unchanged 00:43:56 Received message from Master: op=Shutter serial=256763 00:43:56 Shutter LASER open 00:43:56 Received message from Camera: op=State serial=256765 00:43:56 GetSingleValue result=40 Value=cccccccc 00:43:56 SkyScan query 00:43:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:43:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:57 Parameters OK 00:43:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:57 Set A/D data flow result=40 00:43:57 Set A/D channel type result=40 00:43:57 Set A/D encoding result=40 00:43:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:57 Set channel filter=0.000000e+000 result=40 00:43:57 Config A/D Result=40 00:43:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:57 Get A/D filter: -9.255963e+061 result=40 00:43:57 Get A/D value=-858993460 result=40 00:43:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:57 Parameters OK 00:43:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:57 Set A/D data flow result=40 00:43:57 Set A/D channel type result=40 00:43:57 Set A/D encoding result=40 00:43:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:57 Set channel filter=0.000000e+000 result=40 00:43:57 Config A/D Result=40 00:43:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:57 Get A/D filter: -9.255963e+061 result=40 00:43:57 Get A/D value=-858993460 result=40 00:43:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:43:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:43:57 Aux= 00:43:57 Message to Camera, serial 256765 queued 00:44:05 Received message from Master: op=Shutter serial=256775 00:44:05 Shutter LASER close 00:44:06 Received message from Master: op=PointingHead serial=256779 00:44:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:44:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:44:06 Point started: ret=0 00:44:06 point_skyscan result=0 00:44:07 Check angles 00:44:07 SkyScan query 00:44:08 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.43<-21562 Statuses=0009 0009 00:44:08 Msec=0 True Az=135.75 Ze=-143.43 Az status=0009 Ze status=0009 00:44:08 Check angles 00:44:08 SkyScan query 00:44:08 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.025<-20135 Statuses=0009 0009 00:44:08 Msec=750 True Az=153.63 Ze=-122.025 Az status=0009 Ze status=0009 00:44:09 Check angles 00:44:09 SkyScan query 00:44:09 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.545<-18703 Statuses=0009 0009 00:44:09 Msec=1500 True Az=171.525 Ze=-100.545 Az status=0009 Ze status=0009 00:44:09 Check angles 00:44:09 SkyScan query 00:44:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.68<-17312 Statuses=0008 0009 00:44:10 Msec=2250 True Az=176.01 Ze=-79.68 Az status=0008 Ze status=0009 00:44:10 Check angles 00:44:10 SkyScan query 00:44:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.29<-15886 Statuses=0008 0009 00:44:11 Msec=3000 True Az=176.01 Ze=-58.29 Az status=0008 Ze status=0009 00:44:11 Check angles 00:44:11 SkyScan query 00:44:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 00:44:11 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 00:44:11 Message to Master queued w/err=0: serial=256779 error=0 00:44:16 Received message from Master: op=Filter serial=256780 00:44:16 Color wheel filter change from 0 to 0 00:44:16 FLIGetFilterPos err=0 currentPosition=0 00:44:16 FLIGetStepsRemaining err=0 RemainingSteps=0 00:44:16 Filter is already there-color wheel unchanged 00:44:17 Received message from Master: op=Shutter serial=256781 00:44:17 Shutter LASER close 00:44:17 Received message from Camera: op=State serial=256783 00:44:17 GetSingleValue result=40 Value=cccccccc 00:44:17 SkyScan query 00:44:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:44:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:17 Parameters OK 00:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:17 Set A/D data flow result=40 00:44:17 Set A/D channel type result=40 00:44:17 Set A/D encoding result=40 00:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:17 Set channel filter=0.000000e+000 result=40 00:44:17 Config A/D Result=40 00:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:17 Get A/D filter: -9.255963e+061 result=40 00:44:17 Get A/D value=-858993460 result=40 00:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:17 Parameters OK 00:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:17 Set A/D data flow result=40 00:44:17 Set A/D channel type result=40 00:44:17 Set A/D encoding result=40 00:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:17 Set channel filter=0.000000e+000 result=40 00:44:17 Config A/D Result=40 00:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:17 Get A/D filter: -9.255963e+061 result=40 00:44:17 Get A/D value=-858993460 result=40 00:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:44:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:44:17 Aux= 00:44:17 Message to Camera, serial 256783 queued 00:44:54 Received message from Master: op=PointingHead serial=256796 00:44:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:44:54 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:44:55 Point started: ret=0 00:44:55 point_skyscan result=0 00:44:55 Check angles 00:44:55 SkyScan query 00:44:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.24<-13416 Statuses=0008 0009 00:44:56 Msec=0 True Az=175.995 Ze=-21.24 Az status=0008 Ze status=0009 00:44:56 Check angles 00:44:56 SkyScan query 00:44:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.3<-12020 Statuses=0008 0009 00:44:57 Msec=750 True Az=175.995 Ze=-0.3 Az status=0008 Ze status=0009 00:44:57 Check angles 00:44:57 SkyScan query 00:44:58 SkyScan query done: ret=0 az=175.995<-11733 ze=20.64<-10624 Statuses=0008 0009 00:44:58 Msec=1500 True Az=175.995 Ze=20.64 Az status=0008 Ze status=0009 00:44:58 Check angles 00:44:58 SkyScan query 00:44:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 00:44:58 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 00:44:58 Check angles 00:44:58 SkyScan query 00:44:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 00:44:59 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 00:44:59 Message to Master queued w/err=0: serial=256796 error=0 00:45:04 Received message from Master: op=Filter serial=256797 00:45:04 Color wheel filter change from 0 to 0 00:45:04 FLIGetFilterPos err=0 currentPosition=0 00:45:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:45:04 Filter is already there-color wheel unchanged 00:45:04 Received message from Master: op=Shutter serial=256798 00:45:04 Shutter LASER close 00:45:04 Received message from Camera: op=State serial=256800 00:45:04 GetSingleValue result=40 Value=cccccccc 00:45:04 SkyScan query 00:45:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:45:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:05 Parameters OK 00:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:05 Set A/D data flow result=40 00:45:05 Set A/D channel type result=40 00:45:05 Set A/D encoding result=40 00:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:05 Set channel filter=0.000000e+000 result=40 00:45:05 Config A/D Result=40 00:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:05 Get A/D filter: -9.255963e+061 result=40 00:45:05 Get A/D value=-858993460 result=40 00:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:05 Parameters OK 00:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:05 Set A/D data flow result=40 00:45:05 Set A/D channel type result=40 00:45:05 Set A/D encoding result=40 00:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:05 Set channel filter=0.000000e+000 result=40 00:45:05 Config A/D Result=40 00:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:05 Get A/D filter: -9.255963e+061 result=40 00:45:05 Get A/D value=-858993460 result=40 00:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:45:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:45:05 Aux= 00:45:05 Message to Camera, serial 256800 queued 00:45:27 Received message from Master: op=Identify serial=256801 00:45:42 Received message from Master: op=PointingHead serial=256816 00:45:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:45:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:45:42 Point started: ret=0 00:45:42 point_skyscan result=0 00:45:43 Check angles 00:45:43 SkyScan query 00:45:43 SkyScan query done: ret=0 az=152.7<-10180 ze=8.31<-11446 Statuses=0009 0009 00:45:43 Msec=0 True Az=152.7 Ze=8.31 Az status=0009 Ze status=0009 00:45:43 Check angles 00:45:43 SkyScan query 00:45:44 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.585<-12839 Statuses=0009 0009 00:45:44 Msec=750 True Az=135.27 Ze=-12.585 Az status=0009 Ze status=0009 00:45:44 Check angles 00:45:44 SkyScan query 00:45:45 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.585<-14239 Statuses=0009 0009 00:45:45 Msec=1500 True Az=117.765 Ze=-33.585 Az status=0009 Ze status=0009 00:45:45 Check angles 00:45:45 SkyScan query 00:45:46 SkyScan query done: ret=0 az=100.275<-6685 ze=-51.555<-15437 Statuses=0009 0009 00:45:46 Msec=2250 True Az=100.275 Ze=-51.555 Az status=0009 Ze status=0009 00:45:46 Check angles [UTC 2018-12-19 00:45:46] 00:45:46 SkyScan query 00:45:46 SkyScan query done: ret=0 az=85.965<-5731 ze=-51.525<-15435 Statuses=0009 0008 00:45:46 Msec=3000 True Az=85.965 Ze=-51.525 Az status=0009 Ze status=0008 00:45:46 Check angles 00:45:46 SkyScan query 00:45:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:45:47 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:45:47 Message to Master queued w/err=0: serial=256816 error=0 00:45:52 Received message from Master: op=Filter serial=256817 00:45:52 Color wheel filter change from 0 to 0 00:45:52 FLIGetFilterPos err=0 currentPosition=0 00:45:52 FLIGetStepsRemaining err=0 RemainingSteps=0 00:45:52 Filter is already there-color wheel unchanged 00:45:52 Received message from Master: op=Shutter serial=256818 00:45:52 Shutter LASER close 00:45:52 Received message from Camera: op=State serial=256820 00:45:52 GetSingleValue result=40 Value=cccccccc 00:45:52 SkyScan query 00:45:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:45:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:53 Parameters OK 00:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:53 Set A/D data flow result=40 00:45:53 Set A/D channel type result=40 00:45:53 Set A/D encoding result=40 00:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:53 Set channel filter=0.000000e+000 result=40 00:45:53 Config A/D Result=40 00:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:53 Get A/D filter: -9.255963e+061 result=40 00:45:53 Get A/D value=-858993460 result=40 00:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:53 Parameters OK 00:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:53 Set A/D data flow result=40 00:45:53 Set A/D channel type result=40 00:45:53 Set A/D encoding result=40 00:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:53 Set channel filter=0.000000e+000 result=40 00:45:53 Config A/D Result=40 00:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:53 Get A/D filter: -9.255963e+061 result=40 00:45:53 Get A/D value=-858993460 result=40 00:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:45:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:45:53 Aux= 00:45:53 Message to Camera, serial 256820 queued 00:46:30 Received message from Master: op=PointingHead serial=256833 00:46:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:46:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:46:30 Point started: ret=0 00:46:30 point_skyscan result=0 00:46:31 Check angles 00:46:31 SkyScan query 00:46:31 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.465<-17431 Statuses=0009 0009 00:46:31 Msec=0 True Az=109.14 Ze=-81.465 Az status=0009 Ze status=0009 00:46:32 Check angles 00:46:32 SkyScan query 00:46:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 00:46:32 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 00:46:32 Check angles 00:46:32 SkyScan query 00:46:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.81<-20254 Statuses=0008 0009 00:46:33 Msec=1500 True Az=112.995 Ze=-123.81 Az status=0008 Ze status=0009 00:46:33 Check angles 00:46:33 SkyScan query 00:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 00:46:34 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 00:46:34 Check angles 00:46:34 SkyScan query 00:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.705<-23047 Statuses=0008 0009 00:46:34 Msec=3000 True Az=112.995 Ze=-165.705 Az status=0008 Ze status=0009 00:46:35 Check angles 00:46:35 SkyScan query 00:46:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:46:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:46:35 Message to Master queued w/err=0: serial=256833 error=0 00:46:40 Received message from Master: op=Filter serial=256834 00:46:40 Color wheel filter change from 0 to 0 00:46:40 FLIGetFilterPos err=0 currentPosition=0 00:46:40 FLIGetStepsRemaining err=0 RemainingSteps=0 00:46:40 Filter is already there-color wheel unchanged 00:46:40 Received message from Master: op=Shutter serial=256835 00:46:40 Shutter LASER open 00:46:40 Received message from Camera: op=State serial=256837 00:46:40 GetSingleValue result=40 Value=cccccccc 00:46:40 SkyScan query 00:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:46:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:41 Parameters OK 00:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:41 Set A/D data flow result=40 00:46:41 Set A/D channel type result=40 00:46:41 Set A/D encoding result=40 00:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:41 Set channel filter=0.000000e+000 result=40 00:46:41 Config A/D Result=40 00:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:41 Get A/D filter: -9.255963e+061 result=40 00:46:41 Get A/D value=-858993460 result=40 00:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:41 Parameters OK 00:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:41 Set A/D data flow result=40 00:46:41 Set A/D channel type result=40 00:46:41 Set A/D encoding result=40 00:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:41 Set channel filter=0.000000e+000 result=40 00:46:41 Config A/D Result=40 00:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:41 Get A/D filter: -9.255963e+061 result=40 00:46:41 Get A/D value=-858993460 result=40 00:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:46:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:46:41 Aux= 00:46:41 Message to Camera, serial 256837 queued 00:46:49 Received message from Master: op=Shutter serial=256847 00:46:49 Shutter LASER close 00:46:50 Received message from Master: op=PointingHead serial=256851 00:46:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:46:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:46:50 Point started: ret=0 00:46:50 point_skyscan result=0 00:46:51 Check angles 00:46:51 SkyScan query 00:46:52 SkyScan query done: ret=0 az=89.67<-5978 ze=156.915<-1539 Statuses=0009 0009 00:46:52 Msec=0 True Az=89.67 Ze=156.915 Az status=0009 Ze status=0009 00:46:52 Check angles 00:46:52 SkyScan query 00:46:52 SkyScan query done: ret=0 az=72.12<-4808 ze=135.96<-2936 Statuses=0009 0009 00:46:52 Msec=750 True Az=72.12 Ze=135.96 Az status=0009 Ze status=0009 00:46:53 Check angles 00:46:53 SkyScan query 00:46:53 SkyScan query done: ret=0 az=54.78<-3652 ze=114.99<-4334 Statuses=0009 0009 00:46:53 Msec=1500 True Az=54.78 Ze=114.99 Az status=0009 Ze status=0009 00:46:53 Check angles 00:46:53 SkyScan query 00:46:54 SkyScan query done: ret=0 az=41.025<-2735 ze=94.02<-5732 Statuses=0009 0009 00:46:54 Msec=2250 True Az=41.025 Ze=94.02 Az status=0009 Ze status=0009 00:46:54 Check angles 00:46:54 SkyScan query 00:46:55 SkyScan query done: ret=0 az=40.995<-2733 ze=73.08<-7128 Statuses=0008 0009 00:46:55 Msec=3000 True Az=40.995 Ze=73.08 Az status=0008 Ze status=0009 00:46:55 Check angles 00:46:55 SkyScan query 00:46:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.635<-8491 Statuses=0008 0009 00:46:55 Msec=3750 True Az=40.995 Ze=52.635 Az status=0008 Ze status=0009 00:46:56 Check angles 00:46:56 SkyScan query 00:46:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:46:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:46:56 Message to Master queued w/err=0: serial=256851 error=0 00:47:01 Received message from Master: op=Filter serial=256852 00:47:01 Color wheel filter change from 0 to 0 00:47:01 FLIGetFilterPos err=0 currentPosition=0 00:47:01 FLIGetStepsRemaining err=0 RemainingSteps=0 00:47:01 Filter is already there-color wheel unchanged 00:47:01 Received message from Master: op=Shutter serial=256853 00:47:01 Shutter LASER close 00:47:02 Received message from Camera: op=State serial=256855 00:47:02 GetSingleValue result=40 Value=cccccccc 00:47:02 SkyScan query 00:47:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:47:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:02 Parameters OK 00:47:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:02 Set A/D data flow result=40 00:47:02 Set A/D channel type result=40 00:47:02 Set A/D encoding result=40 00:47:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:02 Set channel filter=0.000000e+000 result=40 00:47:02 Config A/D Result=40 00:47:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:02 Get A/D filter: -9.255963e+061 result=40 00:47:02 Get A/D value=-858993460 result=40 00:47:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:02 Parameters OK 00:47:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:02 Set A/D data flow result=40 00:47:02 Set A/D channel type result=40 00:47:02 Set A/D encoding result=40 00:47:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:02 Set channel filter=0.000000e+000 result=40 00:47:02 Config A/D Result=40 00:47:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:02 Get A/D filter: -9.255963e+061 result=40 00:47:02 Get A/D value=-858993460 result=40 00:47:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:47:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:47:02 Aux= 00:47:02 Message to Camera, serial 256855 queued 00:47:39 Received message from Master: op=PointingHead serial=256868 00:47:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:47:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:47:39 Point started: ret=0 00:47:39 point_skyscan result=0 00:47:40 Check angles 00:47:40 SkyScan query 00:47:41 SkyScan query done: ret=0 az=63.81<-4254 ze=66.57<-7562 Statuses=0009 0008 00:47:41 Msec=0 True Az=63.81 Ze=66.57 Az status=0009 Ze status=0008 00:47:41 Check angles 00:47:41 SkyScan query 00:47:41 SkyScan query done: ret=0 az=81.12<-5408 ze=66.495<-7567 Statuses=0009 0008 00:47:41 Msec=750 True Az=81.12 Ze=66.495 Az status=0009 Ze status=0008 00:47:42 Check angles 00:47:42 SkyScan query 00:47:42 SkyScan query done: ret=0 az=98.685<-6579 ze=66.495<-7567 Statuses=0009 0008 00:47:42 Msec=1500 True Az=98.685 Ze=66.495 Az status=0009 Ze status=0008 00:47:42 Check angles 00:47:42 SkyScan query 00:47:43 SkyScan query done: ret=0 az=116.04<-7736 ze=66.495<-7567 Statuses=0009 0008 00:47:43 Msec=2250 True Az=116.04 Ze=66.495 Az status=0009 Ze status=0008 00:47:43 Check angles 00:47:43 SkyScan query 00:47:44 SkyScan query done: ret=0 az=133.455<-8897 ze=66.495<-7567 Statuses=0009 0008 00:47:44 Msec=3000 True Az=133.455 Ze=66.495 Az status=0009 Ze status=0008 00:47:44 Check angles 00:47:44 SkyScan query 00:47:44 SkyScan query done: ret=0 az=150.96<-10064 ze=66.495<-7567 Statuses=0009 0008 00:47:44 Msec=3750 True Az=150.96 Ze=66.495 Az status=0009 Ze status=0008 00:47:45 Check angles 00:47:45 SkyScan query 00:47:45 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:47:45 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:47:45 Message to Master queued w/err=0: serial=256868 error=0 00:47:50 Received message from Master: op=Filter serial=256869 00:47:50 Color wheel filter change from 0 to 0 00:47:50 FLIGetFilterPos err=0 currentPosition=0 00:47:50 FLIGetStepsRemaining err=0 RemainingSteps=0 00:47:50 Filter is already there-color wheel unchanged 00:47:50 Received message from Master: op=Shutter serial=256870 00:47:50 Shutter LASER close 00:47:50 Received message from Camera: op=State serial=256872 00:47:50 GetSingleValue result=40 Value=cccccccc 00:47:50 SkyScan query 00:47:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:47:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:51 Parameters OK 00:47:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:51 Set A/D data flow result=40 00:47:51 Set A/D channel type result=40 00:47:51 Set A/D encoding result=40 00:47:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:51 Set channel filter=0.000000e+000 result=40 00:47:51 Config A/D Result=40 00:47:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:51 Get A/D filter: -9.255963e+061 result=40 00:47:51 Get A/D value=-858993460 result=40 00:47:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:51 Parameters OK 00:47:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:51 Set A/D data flow result=40 00:47:51 Set A/D channel type result=40 00:47:51 Set A/D encoding result=40 00:47:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:51 Set channel filter=0.000000e+000 result=40 00:47:51 Config A/D Result=40 00:47:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:51 Get A/D filter: -9.255963e+061 result=40 00:47:51 Get A/D value=-858993460 result=40 00:47:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:47:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:47:51 Aux= 00:47:51 Message to Camera, serial 256872 queued 00:48:28 Received message from Master: op=PointingHead serial=256885 00:48:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:48:28 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:48:28 Point started: ret=0 00:48:28 point_skyscan result=0 00:48:29 Check angles 00:48:29 SkyScan query 00:48:29 SkyScan query done: ret=0 az=134.85<-8990 ze=36.555<-9563 Statuses=0009 0009 00:48:29 Msec=0 True Az=134.85 Ze=36.555 Az status=0009 Ze status=0009 00:48:30 Check angles 00:48:30 SkyScan query 00:48:30 SkyScan query done: ret=0 az=117.375<-7825 ze=15.615<-10959 Statuses=0009 0009 00:48:30 Msec=750 True Az=117.375 Ze=15.615 Az status=0009 Ze status=0009 00:48:30 Check angles 00:48:30 SkyScan query 00:48:31 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.34<-12356 Statuses=0009 0009 00:48:31 Msec=1500 True Az=99.975 Ze=-5.34 Az status=0009 Ze status=0009 00:48:31 Check angles 00:48:31 SkyScan query 00:48:32 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.775<-13785 Statuses=0009 0009 00:48:32 Msec=2250 True Az=82.125 Ze=-26.775 Az status=0009 Ze status=0009 00:48:32 Check angles 00:48:32 SkyScan query 00:48:32 SkyScan query done: ret=0 az=64.59<-4306 ze=-38.58<-14572 Statuses=0009 0008 00:48:32 Msec=3000 True Az=64.59 Ze=-38.58 Az status=0009 Ze status=0008 00:48:33 Check angles 00:48:33 SkyScan query 00:48:33 SkyScan query done: ret=0 az=47.145<-3143 ze=-38.52<-14568 Statuses=0009 0008 00:48:33 Msec=3750 True Az=47.145 Ze=-38.52 Az status=0009 Ze status=0008 00:48:33 Check angles 00:48:33 SkyScan query 00:48:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:48:34 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:48:34 Message to Master queued w/err=0: serial=256885 error=0 00:48:39 Received message from Master: op=Filter serial=256886 00:48:39 Color wheel filter change from 0 to 0 00:48:39 FLIGetFilterPos err=0 currentPosition=0 00:48:39 FLIGetStepsRemaining err=0 RemainingSteps=0 00:48:39 Filter is already there-color wheel unchanged 00:48:39 Received message from Master: op=Shutter serial=256887 00:48:39 Shutter LASER close 00:48:39 Received message from Camera: op=State serial=256889 00:48:39 GetSingleValue result=40 Value=cccccccc 00:48:39 SkyScan query 00:48:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:48:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:40 Parameters OK 00:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:40 Set A/D data flow result=40 00:48:40 Set A/D channel type result=40 00:48:40 Set A/D encoding result=40 00:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:40 Set channel filter=0.000000e+000 result=40 00:48:40 Config A/D Result=40 00:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:40 Get A/D filter: -9.255963e+061 result=40 00:48:40 Get A/D value=-858993460 result=40 00:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:40 Parameters OK 00:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:40 Set A/D data flow result=40 00:48:40 Set A/D channel type result=40 00:48:40 Set A/D encoding result=40 00:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:40 Set channel filter=0.000000e+000 result=40 00:48:40 Config A/D Result=40 00:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:40 Get A/D filter: -9.255963e+061 result=40 00:48:40 Get A/D value=-858993460 result=40 00:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:48:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:48:40 Aux= 00:48:40 Message to Camera, serial 256889 queued 00:49:17 Received message from Master: op=PointingHead serial=256902 00:49:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:49:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:49:17 Point started: ret=0 00:49:17 point_skyscan result=0 00:49:18 Check angles 00:49:18 SkyScan query 00:49:18 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.04<-16536 Statuses=0009 0009 00:49:18 Msec=0 True Az=63.795 Ze=-68.04 Az status=0009 Ze status=0009 00:49:18 Check angles 00:49:18 SkyScan query 00:49:19 SkyScan query done: ret=0 az=81.15<-5410 ze=-89.01<-17934 Statuses=0009 0009 00:49:19 Msec=750 True Az=81.15 Ze=-89.01 Az status=0009 Ze status=0009 00:49:19 Check angles 00:49:19 SkyScan query 00:49:20 SkyScan query done: ret=0 az=98.595<-6573 ze=-109.935<-19329 Statuses=0009 0009 00:49:20 Msec=1500 True Az=98.595 Ze=-109.935 Az status=0009 Ze status=0009 00:49:20 Check angles 00:49:20 SkyScan query 00:49:21 SkyScan query done: ret=0 az=116.025<-7735 ze=-130.935<-20729 Statuses=0009 0009 00:49:21 Msec=2250 True Az=116.025 Ze=-130.935 Az status=0009 Ze status=0009 00:49:21 Check angles 00:49:21 SkyScan query 00:49:21 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.555<-21437 Statuses=0009 0008 00:49:21 Msec=3000 True Az=130.965 Ze=-141.555 Az status=0009 Ze status=0008 00:49:21 Check angles 00:49:21 SkyScan query 00:49:22 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:49:22 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:49:22 Message to Master queued w/err=0: serial=256902 error=0 00:49:27 Received message from Master: op=Filter serial=256903 00:49:27 Color wheel filter change from 0 to 0 00:49:27 FLIGetFilterPos err=0 currentPosition=0 00:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 00:49:27 Filter is already there-color wheel unchanged 00:49:27 Received message from Master: op=Shutter serial=256904 00:49:27 Shutter LASER close 00:49:27 Received message from Camera: op=State serial=256906 00:49:27 GetSingleValue result=40 Value=cccccccc 00:49:27 SkyScan query 00:49:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:28 Parameters OK 00:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:28 Set A/D data flow result=40 00:49:28 Set A/D channel type result=40 00:49:28 Set A/D encoding result=40 00:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:28 Set channel filter=0.000000e+000 result=40 00:49:28 Config A/D Result=40 00:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:28 Get A/D filter: -9.255963e+061 result=40 00:49:28 Get A/D value=-858993460 result=40 00:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:28 Parameters OK 00:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:28 Set A/D data flow result=40 00:49:28 Set A/D channel type result=40 00:49:28 Set A/D encoding result=40 00:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:28 Set channel filter=0.000000e+000 result=40 00:49:28 Config A/D Result=40 00:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:28 Get A/D filter: -9.255963e+061 result=40 00:49:28 Get A/D value=-858993460 result=40 00:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:49:28 Aux= 00:49:28 Message to Camera, serial 256906 queued 00:50:05 Received message from Master: op=PointingHead serial=256919 00:50:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:50:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:50:05 Point started: ret=0 00:50:05 point_skyscan result=0 00:50:06 Check angles 00:50:06 SkyScan query 00:50:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 00:50:06 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 00:50:06 Check angles 00:50:06 SkyScan query 00:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:50:07 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:50:07 Message to Master queued w/err=0: serial=256919 error=0 00:50:12 Received message from Master: op=Filter serial=256920 00:50:12 Color wheel filter change from 0 to 0 00:50:12 FLIGetFilterPos err=0 currentPosition=0 00:50:12 FLIGetStepsRemaining err=0 RemainingSteps=0 00:50:12 Filter is already there-color wheel unchanged 00:50:12 Received message from Master: op=Shutter serial=256921 00:50:12 Shutter LASER open 00:50:12 Received message from Camera: op=State serial=256923 00:50:12 GetSingleValue result=40 Value=cccccccc 00:50:12 SkyScan query 00:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:50:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:13 Parameters OK 00:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:13 Set A/D data flow result=40 00:50:13 Set A/D channel type result=40 00:50:13 Set A/D encoding result=40 00:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:13 Set channel filter=0.000000e+000 result=40 00:50:13 Config A/D Result=40 00:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:13 Get A/D filter: -9.255963e+061 result=40 00:50:13 Get A/D value=-858993460 result=40 00:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:13 Parameters OK 00:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:13 Set A/D data flow result=40 00:50:13 Set A/D channel type result=40 00:50:13 Set A/D encoding result=40 00:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:13 Set channel filter=0.000000e+000 result=40 00:50:13 Config A/D Result=40 00:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:13 Get A/D filter: -9.255963e+061 result=40 00:50:13 Get A/D value=-858993460 result=40 00:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:50:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:50:13 Aux= 00:50:13 Message to Camera, serial 256923 queued 00:50:21 Received message from Master: op=Shutter serial=256933 00:50:21 Shutter LASER close 00:50:22 Received message from Master: op=PointingHead serial=256937 00:50:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:50:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:50:22 Point started: ret=0 00:50:22 point_skyscan result=0 00:50:23 Check angles 00:50:23 SkyScan query 00:50:24 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.55<-21570 Statuses=0009 0009 00:50:24 Msec=0 True Az=135.705 Ze=-143.55 Az status=0009 Ze status=0009 00:50:24 Check angles 00:50:24 SkyScan query 00:50:24 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.58<-20172 Statuses=0009 0009 00:50:24 Msec=750 True Az=153.24 Ze=-122.58 Az status=0009 Ze status=0009 00:50:25 Check angles 00:50:25 SkyScan query 00:50:25 SkyScan query done: ret=0 az=170.67<-11378 ze=-101.7<-18780 Statuses=0009 0009 00:50:25 Msec=1500 True Az=170.67 Ze=-101.7 Az status=0009 Ze status=0009 00:50:25 Check angles 00:50:25 SkyScan query 00:50:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.67<-17378 Statuses=0008 0009 00:50:26 Msec=2250 True Az=175.995 Ze=-80.67 Az status=0008 Ze status=0009 00:50:26 Check angles 00:50:26 SkyScan query 00:50:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.76<-15984 Statuses=0008 0009 00:50:27 Msec=3000 True Az=176.01 Ze=-59.76 Az status=0008 Ze status=0009 00:50:27 Check angles 00:50:27 SkyScan query 00:50:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:50:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:50:27 Message to Master queued w/err=0: serial=256937 error=0 00:50:32 Received message from Master: op=Filter serial=256938 00:50:32 Color wheel filter change from 0 to 0 00:50:32 FLIGetFilterPos err=0 currentPosition=0 00:50:32 FLIGetStepsRemaining err=0 RemainingSteps=0 00:50:32 Filter is already there-color wheel unchanged 00:50:33 Received message from Master: op=Shutter serial=256939 00:50:33 Shutter LASER close 00:50:33 Received message from Camera: op=State serial=256941 00:50:33 GetSingleValue result=40 Value=cccccccc 00:50:33 SkyScan query 00:50:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:50:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:33 Parameters OK 00:50:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:33 Set A/D data flow result=40 00:50:33 Set A/D channel type result=40 00:50:33 Set A/D encoding result=40 00:50:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:33 Set channel filter=0.000000e+000 result=40 00:50:33 Config A/D Result=40 00:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:33 Get A/D filter: -9.255963e+061 result=40 00:50:33 Get A/D value=-858993460 result=40 00:50:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:33 Parameters OK 00:50:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:33 Set A/D data flow result=40 00:50:33 Set A/D channel type result=40 00:50:33 Set A/D encoding result=40 00:50:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:33 Set channel filter=0.000000e+000 result=40 00:50:33 Config A/D Result=40 00:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:33 Get A/D filter: -9.255963e+061 result=40 00:50:33 Get A/D value=-858993460 result=40 00:50:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:50:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:50:33 Aux= 00:50:33 Message to Camera, serial 256941 queued 00:51:10 Received message from Master: op=PointingHead serial=256954 00:51:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:51:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:51:11 Point started: ret=0 00:51:11 point_skyscan result=0 00:51:11 Check angles 00:51:11 SkyScan query 00:51:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.525<-13435 Statuses=0008 0009 00:51:12 Msec=0 True Az=175.995 Ze=-21.525 Az status=0008 Ze status=0009 00:51:12 Check angles 00:51:12 SkyScan query 00:51:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.54<-12036 Statuses=0008 0009 00:51:13 Msec=750 True Az=175.995 Ze=-0.54 Az status=0008 Ze status=0009 00:51:13 Check angles 00:51:13 SkyScan query 00:51:13 SkyScan query done: ret=0 az=175.995<-11733 ze=20.37<-10642 Statuses=0008 0009 00:51:13 Msec=1500 True Az=175.995 Ze=20.37 Az status=0008 Ze status=0009 00:51:14 Check angles 00:51:14 SkyScan query 00:51:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 00:51:14 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 00:51:14 Check angles 00:51:14 SkyScan query 00:51:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 00:51:15 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 00:51:15 Message to Master queued w/err=0: serial=256954 error=0 00:51:20 Received message from Master: op=Filter serial=256955 00:51:20 Color wheel filter change from 0 to 0 00:51:20 FLIGetFilterPos err=0 currentPosition=0 00:51:20 FLIGetStepsRemaining err=0 RemainingSteps=0 00:51:20 Filter is already there-color wheel unchanged 00:51:20 Received message from Master: op=Shutter serial=256956 00:51:20 Shutter LASER close 00:51:20 Received message from Camera: op=State serial=256958 00:51:20 GetSingleValue result=40 Value=cccccccc 00:51:20 SkyScan query 00:51:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:51:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:21 Parameters OK 00:51:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:21 Set A/D data flow result=40 00:51:21 Set A/D channel type result=40 00:51:21 Set A/D encoding result=40 00:51:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:21 Set channel filter=0.000000e+000 result=40 00:51:21 Config A/D Result=40 00:51:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:21 Get A/D filter: -9.255963e+061 result=40 00:51:21 Get A/D value=-858993460 result=40 00:51:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:21 Parameters OK 00:51:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:21 Set A/D data flow result=40 00:51:21 Set A/D channel type result=40 00:51:21 Set A/D encoding result=40 00:51:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:21 Set channel filter=0.000000e+000 result=40 00:51:21 Config A/D Result=40 00:51:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:21 Get A/D filter: -9.255963e+061 result=40 00:51:21 Get A/D value=-858993460 result=40 00:51:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:51:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:51:21 Aux= 00:51:21 Message to Camera, serial 256958 queued 00:51:57 Received message from Master: op=PointingHead serial=256970 00:51:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:51:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:51:57 Point started: ret=0 00:51:57 point_skyscan result=0 00:51:58 Check angles 00:51:58 SkyScan query 00:51:58 SkyScan query done: ret=0 az=152.61<-10174 ze=8.175<-11455 Statuses=0009 0009 00:51:58 Msec=0 True Az=152.61 Ze=8.175 Az status=0009 Ze status=0009 00:51:59 Check angles 00:51:59 SkyScan query 00:51:59 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.72<-12848 Statuses=0009 0009 00:51:59 Msec=750 True Az=135.12 Ze=-12.72 Az status=0009 Ze status=0009 00:51:59 Check angles 00:51:59 SkyScan query 00:52:00 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.735<-14249 Statuses=0009 0009 00:52:00 Msec=1500 True Az=117.615 Ze=-33.735 Az status=0009 Ze status=0009 00:52:00 Check angles 00:52:00 SkyScan query 00:52:01 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.555<-15437 Statuses=0009 0009 00:52:01 Msec=2250 True Az=100.26 Ze=-51.555 Az status=0009 Ze status=0009 00:52:01 Check angles 00:52:01 SkyScan query 00:52:01 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:52:01 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:52:02 Check angles 00:52:02 SkyScan query 00:52:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:52:02 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:52:02 Message to Master queued w/err=0: serial=256970 error=0 00:52:07 Received message from Master: op=Filter serial=256971 00:52:07 Color wheel filter change from 0 to 0 00:52:07 FLIGetFilterPos err=0 currentPosition=0 00:52:07 FLIGetStepsRemaining err=0 RemainingSteps=0 00:52:07 Filter is already there-color wheel unchanged 00:52:07 Received message from Master: op=Shutter serial=256972 00:52:07 Shutter LASER close 00:52:07 Received message from Camera: op=State serial=256974 00:52:07 GetSingleValue result=40 Value=cccccccc 00:52:07 SkyScan query 00:52:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:08 Parameters OK 00:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:08 Set A/D data flow result=40 00:52:08 Set A/D channel type result=40 00:52:08 Set A/D encoding result=40 00:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:08 Set channel filter=0.000000e+000 result=40 00:52:08 Config A/D Result=40 00:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:08 Get A/D filter: -9.255963e+061 result=40 00:52:08 Get A/D value=-858993460 result=40 00:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:08 Parameters OK 00:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:08 Set A/D data flow result=40 00:52:08 Set A/D channel type result=40 00:52:08 Set A/D encoding result=40 00:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:08 Set channel filter=0.000000e+000 result=40 00:52:08 Config A/D Result=40 00:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:08 Get A/D filter: -9.255963e+061 result=40 00:52:08 Get A/D value=-858993460 result=40 00:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:52:08 Aux= 00:52:08 Message to Camera, serial 256974 queued 00:52:45 Received message from Master: op=PointingHead serial=256987 00:52:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:52:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:52:45 Point started: ret=0 00:52:45 point_skyscan result=0 00:52:46 Check angles 00:52:46 SkyScan query 00:52:46 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.27<-17418 Statuses=0009 0009 00:52:46 Msec=0 True Az=109.02 Ze=-81.27 Az status=0009 Ze status=0009 00:52:47 Check angles 00:52:47 SkyScan query 00:52:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 00:52:47 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 00:52:47 Check angles 00:52:47 SkyScan query 00:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.095<-20273 Statuses=0008 0009 00:52:48 Msec=1500 True Az=112.995 Ze=-124.095 Az status=0008 Ze status=0009 00:52:48 Check angles 00:52:48 SkyScan query 00:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.02<-21668 Statuses=0008 0009 00:52:49 Msec=2250 True Az=112.995 Ze=-145.02 Az status=0008 Ze status=0009 00:52:49 Check angles 00:52:49 SkyScan query 00:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.44<-23096 Statuses=0008 0009 00:52:49 Msec=3000 True Az=112.995 Ze=-166.44 Az status=0008 Ze status=0009 00:52:50 Check angles 00:52:50 SkyScan query 00:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:52:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:52:50 Message to Master queued w/err=0: serial=256987 error=0 00:52:55 Received message from Master: op=Filter serial=256988 00:52:55 Color wheel filter change from 0 to 0 00:52:55 FLIGetFilterPos err=0 currentPosition=0 00:52:55 FLIGetStepsRemaining err=0 RemainingSteps=0 00:52:55 Filter is already there-color wheel unchanged 00:52:55 Received message from Master: op=Shutter serial=256989 00:52:55 Shutter LASER open 00:52:56 Received message from Camera: op=State serial=256991 00:52:56 GetSingleValue result=40 Value=cccccccc 00:52:56 SkyScan query 00:52:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:52:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:56 Parameters OK 00:52:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:56 Set A/D data flow result=40 00:52:56 Set A/D channel type result=40 00:52:56 Set A/D encoding result=40 00:52:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:56 Set channel filter=0.000000e+000 result=40 00:52:56 Config A/D Result=40 00:52:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:56 Get A/D filter: -9.255963e+061 result=40 00:52:56 Get A/D value=-858993460 result=40 00:52:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:56 Parameters OK 00:52:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:56 Set A/D data flow result=40 00:52:56 Set A/D channel type result=40 00:52:56 Set A/D encoding result=40 00:52:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:56 Set channel filter=0.000000e+000 result=40 00:52:56 Config A/D Result=40 00:52:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:56 Get A/D filter: -9.255963e+061 result=40 00:52:56 Get A/D value=-858993460 result=40 00:52:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:52:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:52:56 Aux= 00:52:56 Message to Camera, serial 256991 queued 00:53:05 Received message from Master: op=Shutter serial=257001 00:53:05 Shutter LASER close 00:53:05 Received message from Master: op=PointingHead serial=257005 00:53:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:53:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:53:05 Point started: ret=0 00:53:05 point_skyscan result=0 00:53:06 Check angles 00:53:06 SkyScan query 00:53:07 SkyScan query done: ret=0 az=90.03<-6002 ze=157.425<-1505 Statuses=0009 0009 00:53:07 Msec=0 True Az=90.03 Ze=157.425 Az status=0009 Ze status=0009 00:53:07 Check angles 00:53:07 SkyScan query 00:53:07 SkyScan query done: ret=0 az=72.54<-4836 ze=136.425<-2905 Statuses=0009 0009 00:53:07 Msec=750 True Az=72.54 Ze=136.425 Az status=0009 Ze status=0009 00:53:08 Check angles 00:53:08 SkyScan query 00:53:08 SkyScan query done: ret=0 az=54.78<-3652 ze=115.05<-4330 Statuses=0009 0009 00:53:08 Msec=1500 True Az=54.78 Ze=115.05 Az status=0009 Ze status=0009 00:53:08 Check angles 00:53:08 SkyScan query 00:53:09 SkyScan query done: ret=0 az=41.025<-2735 ze=94.065<-5729 Statuses=0009 0009 00:53:09 Msec=2250 True Az=41.025 Ze=94.065 Az status=0009 Ze status=0009 00:53:09 Check angles 00:53:09 SkyScan query 00:53:10 SkyScan query done: ret=0 az=40.995<-2733 ze=73.08<-7128 Statuses=0008 0009 00:53:10 Msec=3000 True Az=40.995 Ze=73.08 Az status=0008 Ze status=0009 00:53:10 Check angles 00:53:10 SkyScan query 00:53:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 00:53:10 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 00:53:11 Check angles 00:53:11 SkyScan query 00:53:11 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 00:53:11 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 00:53:11 Message to Master queued w/err=0: serial=257005 error=0 00:53:16 Received message from Master: op=Filter serial=257006 00:53:16 Color wheel filter change from 0 to 0 00:53:16 FLIGetFilterPos err=0 currentPosition=0 00:53:16 FLIGetStepsRemaining err=0 RemainingSteps=0 00:53:16 Filter is already there-color wheel unchanged 00:53:16 Received message from Master: op=Shutter serial=257007 00:53:16 Shutter LASER close 00:53:17 Received message from Camera: op=State serial=257009 00:53:17 GetSingleValue result=40 Value=cccccccc 00:53:17 SkyScan query 00:53:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:53:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:17 Parameters OK 00:53:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:17 Set A/D data flow result=40 00:53:17 Set A/D channel type result=40 00:53:17 Set A/D encoding result=40 00:53:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:17 Set channel filter=0.000000e+000 result=40 00:53:17 Config A/D Result=40 00:53:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:17 Get A/D filter: -9.255963e+061 result=40 00:53:17 Get A/D value=-858993460 result=40 00:53:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:17 Parameters OK 00:53:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:17 Set A/D data flow result=40 00:53:17 Set A/D channel type result=40 00:53:17 Set A/D encoding result=40 00:53:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:17 Set channel filter=0.000000e+000 result=40 00:53:17 Config A/D Result=40 00:53:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:17 Get A/D filter: -9.255963e+061 result=40 00:53:17 Get A/D value=-858993460 result=40 00:53:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:53:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:53:17 Aux= 00:53:17 Message to Camera, serial 257009 queued 00:53:54 Received message from Master: op=PointingHead serial=257022 00:53:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:53:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:53:54 Point started: ret=0 00:53:54 point_skyscan result=0 00:53:55 Check angles 00:53:55 SkyScan query 00:53:56 SkyScan query done: ret=0 az=63.81<-4254 ze=66.54<-7564 Statuses=0009 0008 00:53:56 Msec=0 True Az=63.81 Ze=66.54 Az status=0009 Ze status=0008 00:53:56 Check angles 00:53:56 SkyScan query 00:53:56 SkyScan query done: ret=0 az=81.525<-5435 ze=66.51<-7566 Statuses=0009 0008 00:53:56 Msec=750 True Az=81.525 Ze=66.51 Az status=0009 Ze status=0008 00:53:57 Check angles 00:53:57 SkyScan query 00:53:57 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 00:53:57 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 00:53:57 Check angles 00:53:57 SkyScan query 00:53:58 SkyScan query done: ret=0 az=116.595<-7773 ze=66.495<-7567 Statuses=0009 0008 00:53:58 Msec=2250 True Az=116.595 Ze=66.495 Az status=0009 Ze status=0008 00:53:58 Check angles 00:53:58 SkyScan query 00:53:59 SkyScan query done: ret=0 az=133.965<-8931 ze=66.495<-7567 Statuses=0009 0008 00:53:59 Msec=3000 True Az=133.965 Ze=66.495 Az status=0009 Ze status=0008 00:53:59 Check angles 00:53:59 SkyScan query 00:53:59 SkyScan query done: ret=0 az=151.425<-10095 ze=66.495<-7567 Statuses=0009 0008 00:53:59 Msec=3750 True Az=151.425 Ze=66.495 Az status=0009 Ze status=0008 00:54:00 Check angles 00:54:00 SkyScan query 00:54:00 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:54:00 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:54:00 Message to Master queued w/err=0: serial=257022 error=0 00:54:05 Received message from Master: op=Filter serial=257023 00:54:05 Color wheel filter change from 0 to 0 00:54:05 FLIGetFilterPos err=0 currentPosition=0 00:54:05 FLIGetStepsRemaining err=0 RemainingSteps=0 00:54:05 Filter is already there-color wheel unchanged 00:54:05 Received message from Master: op=Shutter serial=257024 00:54:05 Shutter LASER close 00:54:05 Received message from Camera: op=State serial=257026 00:54:05 GetSingleValue result=40 Value=cccccccc 00:54:05 SkyScan query 00:54:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:54:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:06 Parameters OK 00:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:06 Set A/D data flow result=40 00:54:06 Set A/D channel type result=40 00:54:06 Set A/D encoding result=40 00:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:06 Set channel filter=0.000000e+000 result=40 00:54:06 Config A/D Result=40 00:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:06 Get A/D filter: -9.255963e+061 result=40 00:54:06 Get A/D value=-858993460 result=40 00:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:06 Parameters OK 00:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:06 Set A/D data flow result=40 00:54:06 Set A/D channel type result=40 00:54:06 Set A/D encoding result=40 00:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:06 Set channel filter=0.000000e+000 result=40 00:54:06 Config A/D Result=40 00:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:06 Get A/D filter: -9.255963e+061 result=40 00:54:06 Get A/D value=-858993460 result=40 00:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:54:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:54:06 Aux= 00:54:06 Message to Camera, serial 257026 queued 00:54:43 Received message from Master: op=PointingHead serial=257039 00:54:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:54:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:54:43 Point started: ret=0 00:54:43 point_skyscan result=0 00:54:44 Check angles 00:54:44 SkyScan query 00:54:44 SkyScan query done: ret=0 az=135.18<-9012 ze=36.87<-9542 Statuses=0009 0009 00:54:44 Msec=0 True Az=135.18 Ze=36.87 Az status=0009 Ze status=0009 00:54:45 Check angles 00:54:45 SkyScan query 00:54:45 SkyScan query done: ret=0 az=117.705<-7847 ze=15.915<-10939 Statuses=0009 0009 00:54:45 Msec=750 True Az=117.705 Ze=15.915 Az status=0009 Ze status=0009 00:54:45 Check angles 00:54:45 SkyScan query 00:54:46 SkyScan query done: ret=0 az=100.335<-6689 ze=-5.025<-12335 Statuses=0009 0009 00:54:46 Msec=1500 True Az=100.335 Ze=-5.025 Az status=0009 Ze status=0009 00:54:46 Check angles 00:54:46 SkyScan query 00:54:47 SkyScan query done: ret=0 az=82.395<-5493 ze=-26.385<-13759 Statuses=0009 0009 00:54:47 Msec=2250 True Az=82.395 Ze=-26.385 Az status=0009 Ze status=0009 00:54:47 Check angles 00:54:47 SkyScan query 00:54:47 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.58<-14572 Statuses=0009 0008 00:54:47 Msec=3000 True Az=64.86 Ze=-38.58 Az status=0009 Ze status=0008 00:54:48 Check angles 00:54:48 SkyScan query 00:54:48 SkyScan query done: ret=0 az=47.385<-3159 ze=-38.52<-14568 Statuses=0009 0008 00:54:48 Msec=3750 True Az=47.385 Ze=-38.52 Az status=0009 Ze status=0008 00:54:48 Check angles 00:54:48 SkyScan query 00:54:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:54:49 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:54:49 Message to Master queued w/err=0: serial=257039 error=0 00:54:54 Received message from Master: op=Filter serial=257040 00:54:54 Color wheel filter change from 0 to 0 00:54:54 FLIGetFilterPos err=0 currentPosition=0 00:54:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:54:54 Filter is already there-color wheel unchanged 00:54:54 Received message from Master: op=Shutter serial=257041 00:54:54 Shutter LASER close 00:54:54 Received message from Camera: op=State serial=257043 00:54:54 GetSingleValue result=40 Value=cccccccc 00:54:54 SkyScan query 00:54:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:54:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:55 Parameters OK 00:54:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:55 Set A/D data flow result=40 00:54:55 Set A/D channel type result=40 00:54:55 Set A/D encoding result=40 00:54:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:55 Set channel filter=0.000000e+000 result=40 00:54:55 Config A/D Result=40 00:54:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:55 Get A/D filter: -9.255963e+061 result=40 00:54:55 Get A/D value=-858993460 result=40 00:54:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:55 Parameters OK 00:54:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:55 Set A/D data flow result=40 00:54:55 Set A/D channel type result=40 00:54:55 Set A/D encoding result=40 00:54:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:55 Set channel filter=0.000000e+000 result=40 00:54:55 Config A/D Result=40 00:54:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:55 Get A/D filter: -9.255963e+061 result=40 00:54:55 Get A/D value=-858993460 result=40 00:54:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:54:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:54:55 Aux= 00:54:55 Message to Camera, serial 257043 queued 00:55:32 Received message from Master: op=PointingHead serial=257056 00:55:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:55:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:55:32 Point started: ret=0 00:55:32 point_skyscan result=0 00:55:33 Check angles 00:55:33 SkyScan query 00:55:33 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.085<-16539 Statuses=0009 0009 00:55:33 Msec=0 True Az=63.87 Ze=-68.085 Az status=0009 Ze status=0009 00:55:33 Check angles 00:55:33 SkyScan query 00:55:34 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.085<-17939 Statuses=0009 0009 00:55:34 Msec=750 True Az=81.33 Ze=-89.085 Az status=0009 Ze status=0009 00:55:34 Check angles 00:55:34 SkyScan query 00:55:35 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.505<-19367 Statuses=0009 0009 00:55:35 Msec=1500 True Az=99.18 Ze=-110.505 Az status=0009 Ze status=0009 [UTC 2018-12-19 00:55:35] 00:55:35 Check angles 00:55:35 SkyScan query 00:55:36 SkyScan query done: ret=0 az=118.17<-7878 ze=-133.17<-20878 Statuses=0009 0009 00:55:36 Msec=2250 True Az=118.17 Ze=-133.17 Az status=0009 Ze status=0009 00:55:36 Check angles 00:55:36 SkyScan query 00:55:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 00:55:36 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 00:55:37 Check angles 00:55:37 SkyScan query 00:55:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 00:55:37 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 00:55:37 Message to Master queued w/err=0: serial=257056 error=0 00:55:42 Received message from Master: op=Filter serial=257057 00:55:42 Color wheel filter change from 0 to 0 00:55:42 FLIGetFilterPos err=0 currentPosition=0 00:55:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:55:42 Filter is already there-color wheel unchanged 00:55:42 Received message from Master: op=Shutter serial=257058 00:55:42 Shutter LASER close 00:55:42 Received message from Camera: op=State serial=257060 00:55:42 GetSingleValue result=40 Value=cccccccc 00:55:42 SkyScan query 00:55:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:55:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:43 Parameters OK 00:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:43 Set A/D data flow result=40 00:55:43 Set A/D channel type result=40 00:55:43 Set A/D encoding result=40 00:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:43 Set channel filter=0.000000e+000 result=40 00:55:43 Config A/D Result=40 00:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:43 Get A/D filter: -9.255963e+061 result=40 00:55:43 Get A/D value=-858993460 result=40 00:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:43 Parameters OK 00:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:43 Set A/D data flow result=40 00:55:43 Set A/D channel type result=40 00:55:43 Set A/D encoding result=40 00:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:43 Set channel filter=0.000000e+000 result=40 00:55:43 Config A/D Result=40 00:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:43 Get A/D filter: -9.255963e+061 result=40 00:55:43 Get A/D value=-858993460 result=40 00:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:43 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:55:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:55:43 Aux= 00:55:43 Message to Camera, serial 257060 queued [UTC 2018-12-19 00:55:52] 00:56:20 Received message from Master: op=PointingHead serial=257073 00:56:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:56:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:56:20 Point started: ret=0 00:56:20 point_skyscan result=0 00:56:21 Check angles 00:56:21 SkyScan query 00:56:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 00:56:21 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 00:56:22 Check angles 00:56:22 SkyScan query 00:56:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:56:22 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:56:22 Message to Master queued w/err=0: serial=257073 error=0 00:56:27 Received message from Master: op=Filter serial=257074 00:56:27 Color wheel filter change from 0 to 0 00:56:27 FLIGetFilterPos err=0 currentPosition=0 00:56:27 FLIGetStepsRemaining err=0 RemainingSteps=0 00:56:27 Filter is already there-color wheel unchanged 00:56:27 Received message from Master: op=Shutter serial=257075 00:56:27 Shutter LASER open 00:56:27 Received message from Camera: op=State serial=257077 00:56:27 GetSingleValue result=40 Value=cccccccc 00:56:27 SkyScan query 00:56:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:56:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:28 Parameters OK 00:56:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:28 Set A/D data flow result=40 00:56:28 Set A/D channel type result=40 00:56:28 Set A/D encoding result=40 00:56:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:28 Set channel filter=0.000000e+000 result=40 00:56:28 Config A/D Result=40 00:56:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:28 Get A/D filter: -9.255963e+061 result=40 00:56:28 Get A/D value=-858993460 result=40 00:56:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:28 Parameters OK 00:56:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:28 Set A/D data flow result=40 00:56:28 Set A/D channel type result=40 00:56:28 Set A/D encoding result=40 00:56:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:28 Set channel filter=0.000000e+000 result=40 00:56:28 Config A/D Result=40 00:56:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:28 Get A/D filter: -9.255963e+061 result=40 00:56:28 Get A/D value=-858993460 result=40 00:56:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:56:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:56:28 Aux= 00:56:28 Message to Camera, serial 257077 queued 00:56:36 Received message from Master: op=Shutter serial=257086 00:56:36 Shutter LASER close 00:56:36 Received message from Master: op=PointingHead serial=257090 00:56:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:56:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:56:36 Point started: ret=0 00:56:36 point_skyscan result=0 00:56:37 Check angles 00:56:37 SkyScan query 00:56:38 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.415<-21561 Statuses=0009 0009 00:56:38 Msec=0 True Az=135.84 Ze=-143.415 Az status=0009 Ze status=0009 00:56:38 Check angles 00:56:38 SkyScan query 00:56:39 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.43<-20162 Statuses=0009 0009 00:56:39 Msec=750 True Az=153.3 Ze=-122.43 Az status=0009 Ze status=0009 00:56:39 Check angles 00:56:39 SkyScan query 00:56:39 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.535<-18769 Statuses=0009 0009 00:56:39 Msec=1500 True Az=170.85 Ze=-101.535 Az status=0009 Ze status=0009 00:56:39 Check angles 00:56:39 SkyScan query 00:56:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.505<-17367 Statuses=0008 0009 00:56:40 Msec=2250 True Az=175.995 Ze=-80.505 Az status=0008 Ze status=0009 00:56:40 Check angles 00:56:40 SkyScan query 00:56:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.595<-15973 Statuses=0008 0009 00:56:41 Msec=3000 True Az=175.995 Ze=-59.595 Az status=0008 Ze status=0009 00:56:41 Check angles 00:56:41 SkyScan query 00:56:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:56:42 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:56:42 Message to Master queued w/err=0: serial=257090 error=0 00:56:47 Received message from Master: op=Filter serial=257091 00:56:47 Color wheel filter change from 0 to 0 00:56:47 FLIGetFilterPos err=0 currentPosition=0 00:56:47 FLIGetStepsRemaining err=0 RemainingSteps=0 00:56:47 Filter is already there-color wheel unchanged 00:56:47 Received message from Master: op=Shutter serial=257092 00:56:47 Shutter LASER close 00:56:47 Received message from Camera: op=State serial=257094 00:56:47 GetSingleValue result=40 Value=cccccccc 00:56:47 SkyScan query 00:56:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:56:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:47 Parameters OK 00:56:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:47 Set A/D data flow result=40 00:56:47 Set A/D channel type result=40 00:56:47 Set A/D encoding result=40 00:56:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:47 Set channel filter=0.000000e+000 result=40 00:56:47 Config A/D Result=40 00:56:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:47 Get A/D filter: -9.255963e+061 result=40 00:56:47 Get A/D value=-858993460 result=40 00:56:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:47 Parameters OK 00:56:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:47 Set A/D data flow result=40 00:56:47 Set A/D channel type result=40 00:56:47 Set A/D encoding result=40 00:56:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:47 Set channel filter=0.000000e+000 result=40 00:56:47 Config A/D Result=40 00:56:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:47 Get A/D filter: -9.255963e+061 result=40 00:56:47 Get A/D value=-858993460 result=40 00:56:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:56:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:56:47 Aux= 00:56:47 Message to Camera, serial 257094 queued 00:57:24 Received message from Master: op=PointingHead serial=257107 00:57:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:57:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:57:25 Point started: ret=0 00:57:25 point_skyscan result=0 00:57:26 Check angles 00:57:26 SkyScan query 00:57:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-22.005<-13467 Statuses=0008 0009 00:57:26 Msec=0 True Az=175.995 Ze=-22.005 Az status=0008 Ze status=0009 00:57:26 Check angles 00:57:26 SkyScan query 00:57:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.555<-12037 Statuses=0008 0009 00:57:27 Msec=750 True Az=175.995 Ze=-0.555 Az status=0008 Ze status=0009 00:57:27 Check angles 00:57:27 SkyScan query 00:57:28 SkyScan query done: ret=0 az=175.995<-11733 ze=20.37<-10642 Statuses=0008 0009 00:57:28 Msec=1500 True Az=175.995 Ze=20.37 Az status=0008 Ze status=0009 00:57:28 Check angles 00:57:28 SkyScan query 00:57:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.58<-9428 Statuses=0008 0009 00:57:28 Msec=2250 True Az=175.995 Ze=38.58 Az status=0008 Ze status=0009 00:57:29 Check angles 00:57:29 SkyScan query 00:57:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 00:57:29 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 00:57:29 Message to Master queued w/err=0: serial=257107 error=0 00:57:34 Received message from Master: op=Filter serial=257108 00:57:34 Color wheel filter change from 0 to 0 00:57:34 FLIGetFilterPos err=0 currentPosition=0 00:57:34 FLIGetStepsRemaining err=0 RemainingSteps=0 00:57:34 Filter is already there-color wheel unchanged 00:57:34 Received message from Master: op=Shutter serial=257109 00:57:34 Shutter LASER close 00:57:34 Received message from Camera: op=State serial=257111 00:57:34 GetSingleValue result=40 Value=cccccccc 00:57:34 SkyScan query 00:57:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:57:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:35 Parameters OK 00:57:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:35 Set A/D data flow result=40 00:57:35 Set A/D channel type result=40 00:57:35 Set A/D encoding result=40 00:57:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:35 Set channel filter=0.000000e+000 result=40 00:57:35 Config A/D Result=40 00:57:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:35 Get A/D filter: -9.255963e+061 result=40 00:57:35 Get A/D value=-858993460 result=40 00:57:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:35 Parameters OK 00:57:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:35 Set A/D data flow result=40 00:57:35 Set A/D channel type result=40 00:57:35 Set A/D encoding result=40 00:57:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:35 Set channel filter=0.000000e+000 result=40 00:57:35 Config A/D Result=40 00:57:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:35 Get A/D filter: -9.255963e+061 result=40 00:57:35 Get A/D value=-858993460 result=40 00:57:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:57:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:57:35 Aux= 00:57:35 Message to Camera, serial 257111 queued 00:58:12 Received message from Master: op=PointingHead serial=257124 00:58:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:58:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:58:12 Point started: ret=0 00:58:12 point_skyscan result=0 00:58:13 Check angles 00:58:13 SkyScan query 00:58:13 SkyScan query done: ret=0 az=153.09<-10206 ze=8.835<-11411 Statuses=0009 0009 00:58:13 Msec=0 True Az=153.09 Ze=8.835 Az status=0009 Ze status=0009 00:58:14 Check angles 00:58:14 SkyScan query 00:58:14 SkyScan query done: ret=0 az=135.63<-9042 ze=-12.195<-12813 Statuses=0009 0009 00:58:14 Msec=750 True Az=135.63 Ze=-12.195 Az status=0009 Ze status=0009 00:58:14 Check angles 00:58:14 SkyScan query 00:58:15 SkyScan query done: ret=0 az=118.11<-7874 ze=-33.09<-14206 Statuses=0009 0009 00:58:15 Msec=1500 True Az=118.11 Ze=-33.09 Az status=0009 Ze status=0009 00:58:15 Check angles 00:58:15 SkyScan query 00:58:16 SkyScan query done: ret=0 az=100.755<-6717 ze=-51.525<-15435 Statuses=0009 0009 00:58:16 Msec=2250 True Az=100.755 Ze=-51.525 Az status=0009 Ze status=0009 00:58:16 Check angles 00:58:16 SkyScan query 00:58:16 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 00:58:16 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 00:58:17 Check angles 00:58:17 SkyScan query 00:58:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:58:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:58:17 Message to Master queued w/err=0: serial=257124 error=0 00:58:22 Received message from Master: op=Filter serial=257125 00:58:22 Color wheel filter change from 0 to 0 00:58:22 FLIGetFilterPos err=0 currentPosition=0 00:58:22 FLIGetStepsRemaining err=0 RemainingSteps=0 00:58:22 Filter is already there-color wheel unchanged 00:58:22 Received message from Master: op=Shutter serial=257126 00:58:22 Shutter LASER close 00:58:22 Received message from Camera: op=State serial=257128 00:58:22 GetSingleValue result=40 Value=cccccccc 00:58:22 SkyScan query 00:58:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:58:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:23 Parameters OK 00:58:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:23 Set A/D data flow result=40 00:58:23 Set A/D channel type result=40 00:58:23 Set A/D encoding result=40 00:58:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:23 Set channel filter=0.000000e+000 result=40 00:58:23 Config A/D Result=40 00:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:23 Get A/D filter: -9.255963e+061 result=40 00:58:23 Get A/D value=-858993460 result=40 00:58:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:23 Parameters OK 00:58:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:23 Set A/D data flow result=40 00:58:23 Set A/D channel type result=40 00:58:23 Set A/D encoding result=40 00:58:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:23 Set channel filter=0.000000e+000 result=40 00:58:23 Config A/D Result=40 00:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:23 Get A/D filter: -9.255963e+061 result=40 00:58:23 Get A/D value=-858993460 result=40 00:58:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:58:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:58:23 Aux= 00:58:23 Message to Camera, serial 257128 queued 00:59:00 Received message from Master: op=PointingHead serial=257141 00:59:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:59:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:59:00 Point started: ret=0 00:59:00 point_skyscan result=0 00:59:01 Check angles 00:59:01 SkyScan query 00:59:02 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.135<-17409 Statuses=0009 0009 00:59:02 Msec=0 True Az=108.945 Ze=-81.135 Az status=0009 Ze status=0009 00:59:02 Check angles 00:59:02 SkyScan query 00:59:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 00:59:02 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 00:59:02 Check angles 00:59:02 SkyScan query 00:59:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 00:59:03 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 00:59:03 Check angles 00:59:03 SkyScan query 00:59:04 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.45<-21630 Statuses=0008 0009 00:59:04 Msec=2250 True Az=112.98 Ze=-144.45 Az status=0008 Ze status=0009 00:59:04 Check angles 00:59:04 SkyScan query 00:59:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.39<-23026 Statuses=0008 0009 00:59:05 Msec=3000 True Az=112.995 Ze=-165.39 Az status=0008 Ze status=0009 00:59:05 Check angles 00:59:05 SkyScan query 00:59:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:59:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:59:05 Message to Master queued w/err=0: serial=257141 error=0 00:59:10 Received message from Master: op=Filter serial=257142 00:59:10 Color wheel filter change from 0 to 0 00:59:10 FLIGetFilterPos err=0 currentPosition=0 00:59:10 FLIGetStepsRemaining err=0 RemainingSteps=0 00:59:10 Filter is already there-color wheel unchanged 00:59:11 Received message from Master: op=Shutter serial=257143 00:59:11 Shutter LASER open 00:59:11 Received message from Camera: op=State serial=257145 00:59:11 GetSingleValue result=40 Value=cccccccc 00:59:11 SkyScan query 00:59:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:59:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:11 Parameters OK 00:59:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:11 Set A/D data flow result=40 00:59:11 Set A/D channel type result=40 00:59:11 Set A/D encoding result=40 00:59:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:11 Set channel filter=0.000000e+000 result=40 00:59:11 Config A/D Result=40 00:59:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:11 Get A/D filter: -9.255963e+061 result=40 00:59:11 Get A/D value=-858993460 result=40 00:59:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:11 Parameters OK 00:59:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:11 Set A/D data flow result=40 00:59:11 Set A/D channel type result=40 00:59:11 Set A/D encoding result=40 00:59:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:11 Set channel filter=0.000000e+000 result=40 00:59:11 Config A/D Result=40 00:59:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:11 Get A/D filter: -9.255963e+061 result=40 00:59:11 Get A/D value=-858993460 result=40 00:59:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:59:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:59:11 Aux= 00:59:11 Message to Camera, serial 257145 queued 00:59:20 Received message from Master: op=Shutter serial=257155 00:59:20 Shutter LASER close 00:59:20 Received message from Master: op=PointingHead serial=257159 00:59:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:59:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:59:20 Point started: ret=0 00:59:20 point_skyscan result=0 00:59:21 Check angles 00:59:21 SkyScan query 00:59:22 SkyScan query done: ret=0 az=89.865<-5991 ze=157.185<-1521 Statuses=0009 0009 00:59:22 Msec=0 True Az=89.865 Ze=157.185 Az status=0009 Ze status=0009 00:59:22 Check angles 00:59:22 SkyScan query 00:59:23 SkyScan query done: ret=0 az=72.03<-4802 ze=135.81<-2946 Statuses=0009 0009 00:59:23 Msec=750 True Az=72.03 Ze=135.81 Az status=0009 Ze status=0009 00:59:23 Check angles 00:59:23 SkyScan query 00:59:23 SkyScan query done: ret=0 az=54.615<-3641 ze=114.825<-4345 Statuses=0009 0009 00:59:23 Msec=1500 True Az=54.615 Ze=114.825 Az status=0009 Ze status=0009 00:59:23 Check angles 00:59:23 SkyScan query 00:59:24 SkyScan query done: ret=0 az=41.01<-2734 ze=93.885<-5741 Statuses=0009 0009 00:59:24 Msec=2250 True Az=41.01 Ze=93.885 Az status=0009 Ze status=0009 00:59:24 Check angles 00:59:24 SkyScan query 00:59:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.885<-7141 Statuses=0008 0009 00:59:25 Msec=3000 True Az=40.995 Ze=72.885 Az status=0008 Ze status=0009 00:59:25 Check angles 00:59:25 SkyScan query 00:59:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 00:59:26 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 00:59:26 Check angles 00:59:26 SkyScan query 00:59:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:59:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:59:26 Message to Master queued w/err=0: serial=257159 error=0 00:59:31 Received message from Master: op=Filter serial=257160 00:59:31 Color wheel filter change from 0 to 0 00:59:31 FLIGetFilterPos err=0 currentPosition=0 00:59:31 FLIGetStepsRemaining err=0 RemainingSteps=0 00:59:31 Filter is already there-color wheel unchanged 00:59:31 Received message from Master: op=Shutter serial=257161 00:59:31 Shutter LASER close 00:59:32 Received message from Camera: op=State serial=257163 00:59:32 GetSingleValue result=40 Value=cccccccc 00:59:32 SkyScan query 00:59:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:59:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:32 Parameters OK 00:59:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:32 Set A/D data flow result=40 00:59:32 Set A/D channel type result=40 00:59:32 Set A/D encoding result=40 00:59:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:32 Set channel filter=0.000000e+000 result=40 00:59:32 Config A/D Result=40 00:59:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:32 Get A/D filter: -9.255963e+061 result=40 00:59:32 Get A/D value=-858993460 result=40 00:59:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:32 Parameters OK 00:59:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:32 Set A/D data flow result=40 00:59:32 Set A/D channel type result=40 00:59:32 Set A/D encoding result=40 00:59:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:32 Set channel filter=0.000000e+000 result=40 00:59:32 Config A/D Result=40 00:59:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:32 Get A/D filter: -9.255963e+061 result=40 00:59:32 Get A/D value=-858993460 result=40 00:59:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:59:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:59:32 Aux= 00:59:32 Message to Camera, serial 257163 queued 01:00:09 Received message from Master: op=PointingHead serial=257176 01:00:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:00:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:00:09 Point started: ret=0 01:00:09 point_skyscan result=0 01:00:10 Check angles 01:00:10 SkyScan query 01:00:11 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 01:00:11 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 01:00:11 Check angles 01:00:11 SkyScan query 01:00:12 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 01:00:12 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 01:00:12 Check angles 01:00:12 SkyScan query 01:00:12 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 01:00:12 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 01:00:12 Check angles 01:00:12 SkyScan query 01:00:13 SkyScan query done: ret=0 az=116.52<-7768 ze=66.495<-7567 Statuses=0009 0008 01:00:13 Msec=2250 True Az=116.52 Ze=66.495 Az status=0009 Ze status=0008 01:00:13 Check angles 01:00:13 SkyScan query 01:00:14 SkyScan query done: ret=0 az=133.965<-8931 ze=66.495<-7567 Statuses=0009 0008 01:00:14 Msec=3000 True Az=133.965 Ze=66.495 Az status=0009 Ze status=0008 01:00:14 Check angles 01:00:14 SkyScan query 01:00:15 SkyScan query done: ret=0 az=151.365<-10091 ze=66.495<-7567 Statuses=0009 0008 01:00:15 Msec=3750 True Az=151.365 Ze=66.495 Az status=0009 Ze status=0008 01:00:15 Check angles 01:00:15 SkyScan query 01:00:15 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:00:15 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:00:15 Message to Master queued w/err=0: serial=257176 error=0 01:00:20 Received message from Master: op=Filter serial=257177 01:00:20 Color wheel filter change from 0 to 0 01:00:20 FLIGetFilterPos err=0 currentPosition=0 01:00:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:00:20 Filter is already there-color wheel unchanged 01:00:20 Received message from Master: op=Shutter serial=257178 01:00:20 Shutter LASER close 01:00:20 Received message from Camera: op=State serial=257180 01:00:20 GetSingleValue result=40 Value=cccccccc 01:00:20 SkyScan query 01:00:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:00:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:21 Parameters OK 01:00:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:21 Set A/D data flow result=40 01:00:21 Set A/D channel type result=40 01:00:21 Set A/D encoding result=40 01:00:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:21 Set channel filter=0.000000e+000 result=40 01:00:21 Config A/D Result=40 01:00:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:21 Get A/D filter: -9.255963e+061 result=40 01:00:21 Get A/D value=-858993460 result=40 01:00:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:21 Parameters OK 01:00:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:21 Set A/D data flow result=40 01:00:21 Set A/D channel type result=40 01:00:21 Set A/D encoding result=40 01:00:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:21 Set channel filter=0.000000e+000 result=40 01:00:21 Config A/D Result=40 01:00:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:21 Get A/D filter: -9.255963e+061 result=40 01:00:21 Get A/D value=-858993460 result=40 01:00:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:00:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:00:21 Aux= 01:00:21 Message to Camera, serial 257180 queued 01:00:58 Received message from Master: op=PointingHead serial=257193 01:00:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:00:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:00:58 Point started: ret=0 01:00:58 point_skyscan result=0 01:00:59 Check angles 01:00:59 SkyScan query 01:01:00 SkyScan query done: ret=0 az=134.595<-8973 ze=36.255<-9583 Statuses=0009 0009 01:01:00 Msec=0 True Az=134.595 Ze=36.255 Az status=0009 Ze status=0009 01:01:00 Check angles 01:01:00 SkyScan query 01:01:00 SkyScan query done: ret=0 az=116.805<-7787 ze=14.85<-11010 Statuses=0009 0009 01:01:00 Msec=750 True Az=116.805 Ze=14.85 Az status=0009 Ze status=0009 01:01:01 Check angles 01:01:01 SkyScan query 01:01:01 SkyScan query done: ret=0 az=99.33<-6622 ze=-6.105<-12407 Statuses=0009 0009 01:01:01 Msec=1500 True Az=99.33 Ze=-6.105 Az status=0009 Ze status=0009 01:01:01 Check angles 01:01:01 SkyScan query 01:01:02 SkyScan query done: ret=0 az=81.855<-5457 ze=-27.09<-13806 Statuses=0009 0009 01:01:02 Msec=2250 True Az=81.855 Ze=-27.09 Az status=0009 Ze status=0009 01:01:02 Check angles 01:01:02 SkyScan query 01:01:03 SkyScan query done: ret=0 az=64.38<-4292 ze=-38.58<-14572 Statuses=0009 0008 01:01:03 Msec=3000 True Az=64.38 Ze=-38.58 Az status=0009 Ze status=0008 01:01:03 Check angles 01:01:03 SkyScan query 01:01:03 SkyScan query done: ret=0 az=46.92<-3128 ze=-38.52<-14568 Statuses=0009 0008 01:01:03 Msec=3750 True Az=46.92 Ze=-38.52 Az status=0009 Ze status=0008 01:01:04 Check angles 01:01:04 SkyScan query 01:01:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:01:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:01:04 Message to Master queued w/err=0: serial=257193 error=0 01:01:09 Received message from Master: op=Filter serial=257194 01:01:09 Color wheel filter change from 0 to 0 01:01:09 FLIGetFilterPos err=0 currentPosition=0 01:01:09 FLIGetStepsRemaining err=0 RemainingSteps=0 01:01:09 Filter is already there-color wheel unchanged 01:01:09 Received message from Master: op=Shutter serial=257195 01:01:09 Shutter LASER close 01:01:09 Received message from Camera: op=State serial=257197 01:01:09 GetSingleValue result=40 Value=cccccccc 01:01:09 SkyScan query 01:01:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:01:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:10 Parameters OK 01:01:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:10 Set A/D data flow result=40 01:01:10 Set A/D channel type result=40 01:01:10 Set A/D encoding result=40 01:01:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:10 Set channel filter=0.000000e+000 result=40 01:01:10 Config A/D Result=40 01:01:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:10 Get A/D filter: -9.255963e+061 result=40 01:01:10 Get A/D value=-858993460 result=40 01:01:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:10 Parameters OK 01:01:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:10 Set A/D data flow result=40 01:01:10 Set A/D channel type result=40 01:01:10 Set A/D encoding result=40 01:01:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:10 Set channel filter=0.000000e+000 result=40 01:01:10 Config A/D Result=40 01:01:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:10 Get A/D filter: -9.255963e+061 result=40 01:01:10 Get A/D value=-858993460 result=40 01:01:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:01:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:01:10 Aux= 01:01:10 Message to Camera, serial 257197 queued 01:01:47 Received message from Master: op=PointingHead serial=257210 01:01:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:01:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:01:47 Point started: ret=0 01:01:47 point_skyscan result=0 01:01:48 Check angles 01:01:48 SkyScan query 01:01:48 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.535<-16569 Statuses=0009 0009 01:01:48 Msec=0 True Az=64.2 Ze=-68.535 Az status=0009 Ze status=0009 01:01:49 Check angles 01:01:49 SkyScan query 01:01:49 SkyScan query done: ret=0 az=81.72<-5448 ze=-89.52<-17968 Statuses=0009 0009 01:01:49 Msec=750 True Az=81.72 Ze=-89.52 Az status=0009 Ze status=0009 01:01:49 Check angles 01:01:49 SkyScan query 01:01:50 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.505<-19367 Statuses=0009 0009 01:01:50 Msec=1500 True Az=99.18 Ze=-110.505 Az status=0009 Ze status=0009 01:01:50 Check angles 01:01:50 SkyScan query 01:01:51 SkyScan query done: ret=0 az=117<-7800 ze=-131.835<-20789 Statuses=0009 0009 01:01:51 Msec=2250 True Az=117 Ze=-131.835 Az status=0009 Ze status=0009 01:01:51 Check angles 01:01:51 SkyScan query 01:01:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 01:01:52 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 01:01:52 Check angles 01:01:52 SkyScan query 01:01:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 01:01:52 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 01:01:52 Message to Master queued w/err=0: serial=257210 error=0 01:01:57 Received message from Master: op=Filter serial=257211 01:01:57 Color wheel filter change from 0 to 0 01:01:57 FLIGetFilterPos err=0 currentPosition=0 01:01:57 FLIGetStepsRemaining err=0 RemainingSteps=0 01:01:57 Filter is already there-color wheel unchanged 01:01:57 Received message from Master: op=Shutter serial=257212 01:01:57 Shutter LASER close 01:01:57 Received message from Camera: op=State serial=257214 01:01:57 GetSingleValue result=40 Value=cccccccc 01:01:57 SkyScan query 01:01:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:01:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:58 Parameters OK 01:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:58 Set A/D data flow result=40 01:01:58 Set A/D channel type result=40 01:01:58 Set A/D encoding result=40 01:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:58 Set channel filter=0.000000e+000 result=40 01:01:58 Config A/D Result=40 01:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:58 Get A/D filter: -9.255963e+061 result=40 01:01:58 Get A/D value=-858993460 result=40 01:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:58 Parameters OK 01:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:58 Set A/D data flow result=40 01:01:58 Set A/D channel type result=40 01:01:58 Set A/D encoding result=40 01:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:58 Set channel filter=0.000000e+000 result=40 01:01:58 Config A/D Result=40 01:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:58 Get A/D filter: -9.255963e+061 result=40 01:01:58 Get A/D value=-858993460 result=40 01:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:01:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:01:58 Aux= 01:01:58 Message to Camera, serial 257214 queued 01:02:35 Received message from Master: op=PointingHead serial=257227 01:02:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:02:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:02:35 Point started: ret=0 01:02:35 point_skyscan result=0 01:02:36 Check angles 01:02:36 SkyScan query 01:02:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 01:02:37 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 01:02:37 Check angles 01:02:37 SkyScan query 01:02:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:02:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:02:37 Message to Master queued w/err=0: serial=257227 error=0 01:02:42 Received message from Master: op=Filter serial=257228 01:02:42 Color wheel filter change from 0 to 0 01:02:42 FLIGetFilterPos err=0 currentPosition=0 01:02:42 FLIGetStepsRemaining err=0 RemainingSteps=0 01:02:42 Filter is already there-color wheel unchanged 01:02:43 Received message from Master: op=Shutter serial=257229 01:02:43 Shutter LASER open 01:02:43 Received message from Camera: op=State serial=257231 01:02:43 GetSingleValue result=40 Value=cccccccc 01:02:43 SkyScan query 01:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:02:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:43 Parameters OK 01:02:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:43 Set A/D data flow result=40 01:02:43 Set A/D channel type result=40 01:02:43 Set A/D encoding result=40 01:02:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:43 Set channel filter=0.000000e+000 result=40 01:02:43 Config A/D Result=40 01:02:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:43 Get A/D filter: -9.255963e+061 result=40 01:02:43 Get A/D value=-858993460 result=40 01:02:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:43 Parameters OK 01:02:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:43 Set A/D data flow result=40 01:02:43 Set A/D channel type result=40 01:02:43 Set A/D encoding result=40 01:02:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:43 Set channel filter=0.000000e+000 result=40 01:02:43 Config A/D Result=40 01:02:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:43 Get A/D filter: -9.255963e+061 result=40 01:02:43 Get A/D value=-858993460 result=40 01:02:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:02:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:02:43 Aux= 01:02:43 Message to Camera, serial 257231 queued 01:02:52 Received message from Master: op=Shutter serial=257241 01:02:52 Shutter LASER close 01:02:52 Received message from Master: op=PointingHead serial=257245 01:02:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:02:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:02:53 Point started: ret=0 01:02:53 point_skyscan result=0 01:02:53 Check angles 01:02:53 SkyScan query 01:02:54 SkyScan query done: ret=0 az=136.32<-9088 ze=-142.86<-21524 Statuses=0009 0009 01:02:54 Msec=0 True Az=136.32 Ze=-142.86 Az status=0009 Ze status=0009 01:02:54 Check angles 01:02:54 SkyScan query 01:02:55 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.89<-20126 Statuses=0009 0009 01:02:55 Msec=750 True Az=153.705 Ze=-121.89 Az status=0009 Ze status=0009 01:02:55 Check angles 01:02:55 SkyScan query 01:02:56 SkyScan query done: ret=0 az=171.195<-11413 ze=-100.92<-18728 Statuses=0009 0009 01:02:56 Msec=1500 True Az=171.195 Ze=-100.92 Az status=0009 Ze status=0009 01:02:56 Check angles 01:02:56 SkyScan query 01:02:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.025<-17335 Statuses=0008 0009 01:02:56 Msec=2250 True Az=176.01 Ze=-80.025 Az status=0008 Ze status=0009 01:02:56 Check angles 01:02:56 SkyScan query 01:02:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.01<-15934 Statuses=0008 0009 01:02:57 Msec=3000 True Az=175.995 Ze=-59.01 Az status=0008 Ze status=0009 01:02:57 Check angles 01:02:57 SkyScan query 01:02:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 01:02:58 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 01:02:58 Message to Master queued w/err=0: serial=257245 error=0 01:03:03 Received message from Master: op=Filter serial=257246 01:03:03 Color wheel filter change from 0 to 0 01:03:03 FLIGetFilterPos err=0 currentPosition=0 01:03:03 FLIGetStepsRemaining err=0 RemainingSteps=0 01:03:03 Filter is already there-color wheel unchanged 01:03:03 Received message from Master: op=Shutter serial=257247 01:03:03 Shutter LASER close 01:03:03 Received message from Camera: op=State serial=257249 01:03:03 GetSingleValue result=40 Value=cccccccc 01:03:03 SkyScan query 01:03:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:03:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:04 Parameters OK 01:03:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:04 Set A/D data flow result=40 01:03:04 Set A/D channel type result=40 01:03:04 Set A/D encoding result=40 01:03:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:04 Set channel filter=0.000000e+000 result=40 01:03:04 Config A/D Result=40 01:03:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:04 Get A/D filter: -9.255963e+061 result=40 01:03:04 Get A/D value=-858993460 result=40 01:03:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:04 Parameters OK 01:03:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:04 Set A/D data flow result=40 01:03:04 Set A/D channel type result=40 01:03:04 Set A/D encoding result=40 01:03:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:04 Set channel filter=0.000000e+000 result=40 01:03:04 Config A/D Result=40 01:03:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:04 Get A/D filter: -9.255963e+061 result=40 01:03:04 Get A/D value=-858993460 result=40 01:03:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:03:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:03:04 Aux= 01:03:04 Message to Camera, serial 257249 queued 01:03:41 Received message from Master: op=PointingHead serial=257262 01:03:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:03:41 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:03:41 Point started: ret=0 01:03:41 point_skyscan result=0 01:03:42 Check angles 01:03:42 SkyScan query 01:03:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.225<-13415 Statuses=0008 0009 01:03:42 Msec=0 True Az=175.995 Ze=-21.225 Az status=0008 Ze status=0009 01:03:42 Check angles 01:03:42 SkyScan query 01:03:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.315<-12021 Statuses=0008 0009 01:03:43 Msec=750 True Az=175.995 Ze=-0.315 Az status=0008 Ze status=0009 01:03:43 Check angles 01:03:43 SkyScan query 01:03:44 SkyScan query done: ret=0 az=175.995<-11733 ze=20.67<-10622 Statuses=0008 0009 01:03:44 Msec=1500 True Az=175.995 Ze=20.67 Az status=0008 Ze status=0009 01:03:44 Check angles 01:03:44 SkyScan query 01:03:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 01:03:45 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 01:03:45 Check angles 01:03:45 SkyScan query 01:03:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 01:03:45 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 01:03:45 Message to Master queued w/err=0: serial=257262 error=0 01:03:50 Received message from Master: op=Filter serial=257263 01:03:50 Color wheel filter change from 0 to 0 01:03:50 FLIGetFilterPos err=0 currentPosition=0 01:03:50 FLIGetStepsRemaining err=0 RemainingSteps=0 01:03:50 Filter is already there-color wheel unchanged 01:03:51 Received message from Master: op=Shutter serial=257264 01:03:51 Shutter LASER close 01:03:51 Received message from Camera: op=State serial=257266 01:03:51 GetSingleValue result=40 Value=cccccccc 01:03:51 SkyScan query 01:03:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:03:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:51 Parameters OK 01:03:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:51 Set A/D data flow result=40 01:03:51 Set A/D channel type result=40 01:03:51 Set A/D encoding result=40 01:03:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:51 Set channel filter=0.000000e+000 result=40 01:03:51 Config A/D Result=40 01:03:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:51 Get A/D filter: -9.255963e+061 result=40 01:03:51 Get A/D value=-858993460 result=40 01:03:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:51 Parameters OK 01:03:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:51 Set A/D data flow result=40 01:03:51 Set A/D channel type result=40 01:03:51 Set A/D encoding result=40 01:03:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:51 Set channel filter=0.000000e+000 result=40 01:03:51 Config A/D Result=40 01:03:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:51 Get A/D filter: -9.255963e+061 result=40 01:03:51 Get A/D value=-858993460 result=40 01:03:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:03:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:03:51 Aux= 01:03:51 Message to Camera, serial 257266 queued 01:04:28 Received message from Master: op=PointingHead serial=257279 01:04:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:04:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:04:28 Point started: ret=0 01:04:28 point_skyscan result=0 01:04:29 Check angles 01:04:29 SkyScan query 01:04:30 SkyScan query done: ret=0 az=152.73<-10182 ze=8.43<-11438 Statuses=0009 0009 01:04:30 Msec=0 True Az=152.73 Ze=8.43 Az status=0009 Ze status=0009 01:04:30 Check angles 01:04:30 SkyScan query 01:04:30 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.465<-12831 Statuses=0009 0009 01:04:30 Msec=750 True Az=135.3 Ze=-12.465 Az status=0009 Ze status=0009 01:04:31 Check angles 01:04:31 SkyScan query 01:04:31 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.435<-14229 Statuses=0009 0009 01:04:31 Msec=1500 True Az=117.81 Ze=-33.435 Az status=0009 Ze status=0009 01:04:31 Check angles 01:04:31 SkyScan query 01:04:32 SkyScan query done: ret=0 az=100.455<-6697 ze=-51.555<-15437 Statuses=0009 0009 01:04:32 Msec=2250 True Az=100.455 Ze=-51.555 Az status=0009 Ze status=0009 01:04:32 Check angles 01:04:32 SkyScan query 01:04:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 01:04:33 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 01:04:33 Check angles 01:04:33 SkyScan query 01:04:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:04:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:04:33 Message to Master queued w/err=0: serial=257279 error=0 01:04:38 Received message from Master: op=Filter serial=257280 01:04:38 Color wheel filter change from 0 to 0 01:04:38 FLIGetFilterPos err=0 currentPosition=0 01:04:38 FLIGetStepsRemaining err=0 RemainingSteps=0 01:04:38 Filter is already there-color wheel unchanged 01:04:39 Received message from Master: op=Shutter serial=257281 01:04:39 Shutter LASER close 01:04:39 Received message from Camera: op=State serial=257283 01:04:39 GetSingleValue result=40 Value=cccccccc 01:04:39 SkyScan query 01:04:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:04:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:39 Parameters OK 01:04:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:39 Set A/D data flow result=40 01:04:39 Set A/D channel type result=40 01:04:39 Set A/D encoding result=40 01:04:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:39 Set channel filter=0.000000e+000 result=40 01:04:39 Config A/D Result=40 01:04:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:39 Get A/D filter: -9.255963e+061 result=40 01:04:39 Get A/D value=-858993460 result=40 01:04:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:39 Parameters OK 01:04:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:39 Set A/D data flow result=40 01:04:39 Set A/D channel type result=40 01:04:39 Set A/D encoding result=40 01:04:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:39 Set channel filter=0.000000e+000 result=40 01:04:39 Config A/D Result=40 01:04:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:39 Get A/D filter: -9.255963e+061 result=40 01:04:39 Get A/D value=-858993460 result=40 01:04:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:04:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:04:39 Aux= 01:04:39 Message to Camera, serial 257283 queued 01:05:16 Received message from Master: op=PointingHead serial=257296 01:05:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:05:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:05:16 Point started: ret=0 01:05:16 point_skyscan result=0 01:05:17 Check angles 01:05:17 SkyScan query 01:05:18 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.12<-17408 Statuses=0009 0009 01:05:18 Msec=0 True Az=108.81 Ze=-81.12 Az status=0009 Ze status=0009 01:05:18 Check angles 01:05:18 SkyScan query 01:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.105<-18807 Statuses=0008 0009 01:05:18 Msec=750 True Az=112.995 Ze=-102.105 Az status=0008 Ze status=0009 01:05:19 Check angles 01:05:19 SkyScan query 01:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.015<-20201 Statuses=0008 0009 01:05:19 Msec=1500 True Az=112.995 Ze=-123.015 Az status=0008 Ze status=0009 01:05:19 Check angles 01:05:19 SkyScan query 01:05:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 01:05:20 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 01:05:20 Check angles 01:05:20 SkyScan query 01:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.925<-22995 Statuses=0008 0009 01:05:21 Msec=3000 True Az=112.995 Ze=-164.925 Az status=0008 Ze status=0009 01:05:21 Check angles 01:05:21 SkyScan query 01:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:05:21 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:05:21 Message to Master queued w/err=0: serial=257296 error=0 01:05:26 Received message from Master: op=Filter serial=257297 01:05:26 Color wheel filter change from 0 to 0 01:05:26 FLIGetFilterPos err=0 currentPosition=0 01:05:26 FLIGetStepsRemaining err=0 RemainingSteps=0 01:05:26 Filter is already there-color wheel unchanged 01:05:27 Received message from Master: op=Shutter serial=257298 01:05:27 Shutter LASER open 01:05:27 Received message from Camera: op=State serial=257300 01:05:27 GetSingleValue result=40 Value=cccccccc 01:05:27 SkyScan query 01:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:05:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:27 Parameters OK 01:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:27 Set A/D data flow result=40 01:05:27 Set A/D channel type result=40 01:05:27 Set A/D encoding result=40 01:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:27 Set channel filter=0.000000e+000 result=40 01:05:27 Config A/D Result=40 01:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:27 Get A/D filter: -9.255963e+061 result=40 01:05:27 Get A/D value=-858993460 result=40 01:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:27 Parameters OK 01:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:27 Set A/D data flow result=40 01:05:27 Set A/D channel type result=40 01:05:27 Set A/D encoding result=40 01:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:27 Set channel filter=0.000000e+000 result=40 01:05:27 Config A/D Result=40 01:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:27 Get A/D filter: -9.255963e+061 result=40 01:05:27 Get A/D value=-858993460 result=40 01:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:05:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:05:27 Aux= 01:05:27 Message to Camera, serial 257300 queued 01:05:36 Received message from Master: op=Shutter serial=257310 01:05:36 Shutter LASER close 01:05:36 Received message from Master: op=PointingHead serial=257314 01:05:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:05:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:05:37 Point started: ret=0 01:05:37 point_skyscan result=0 01:05:37 Check angles 01:05:37 SkyScan query 01:05:38 SkyScan query done: ret=0 az=90.165<-6011 ze=157.545<-1497 Statuses=0009 0009 01:05:38 Msec=0 True Az=90.165 Ze=157.545 Az status=0009 Ze status=0009 01:05:38 Check angles 01:05:38 SkyScan query 01:05:39 SkyScan query done: ret=0 az=72.69<-4846 ze=136.56<-2896 Statuses=0009 0009 01:05:39 Msec=750 True Az=72.69 Ze=136.56 Az status=0009 Ze status=0009 01:05:39 Check angles 01:05:39 SkyScan query 01:05:39 SkyScan query done: ret=0 az=55.35<-3690 ze=115.68<-4288 Statuses=0009 0009 01:05:39 Msec=1500 True Az=55.35 Ze=115.68 Az status=0009 Ze status=0009 01:05:40 Check angles 01:05:40 SkyScan query 01:05:40 SkyScan query done: ret=0 az=40.95<-2730 ze=94.635<-5691 Statuses=0009 0009 01:05:40 Msec=2250 True Az=40.95 Ze=94.635 Az status=0009 Ze status=0009 01:05:40 Check angles 01:05:40 SkyScan query 01:05:41 SkyScan query done: ret=0 az=40.98<-2732 ze=73.26<-7116 Statuses=0008 0009 01:05:41 Msec=3000 True Az=40.98 Ze=73.26 Az status=0008 Ze status=0009 [UTC 2018-12-19 01:05:41] 01:05:41 Check angles 01:05:41 SkyScan query 01:05:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.9<-8540 Statuses=0008 0009 01:05:42 Msec=3750 True Az=40.995 Ze=51.9 Az status=0008 Ze status=0009 01:05:42 Check angles 01:05:42 SkyScan query 01:05:42 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 01:05:42 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 01:05:42 Message to Master queued w/err=0: serial=257314 error=0 01:05:47 Received message from Master: op=Filter serial=257315 01:05:47 Color wheel filter change from 0 to 0 01:05:47 FLIGetFilterPos err=0 currentPosition=0 01:05:47 FLIGetStepsRemaining err=0 RemainingSteps=0 01:05:47 Filter is already there-color wheel unchanged 01:05:48 Received message from Master: op=Shutter serial=257316 01:05:48 Shutter LASER close 01:05:48 Received message from Camera: op=State serial=257318 01:05:48 GetSingleValue result=40 Value=cccccccc 01:05:48 SkyScan query 01:05:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:05:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:48 Parameters OK 01:05:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:48 Set A/D data flow result=40 01:05:48 Set A/D channel type result=40 01:05:48 Set A/D encoding result=40 01:05:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:48 Set channel filter=0.000000e+000 result=40 01:05:48 Config A/D Result=40 01:05:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:48 Get A/D filter: -9.255963e+061 result=40 01:05:48 Get A/D value=-858993460 result=40 01:05:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:48 Parameters OK 01:05:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:48 Set A/D data flow result=40 01:05:48 Set A/D channel type result=40 01:05:48 Set A/D encoding result=40 01:05:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:48 Set channel filter=0.000000e+000 result=40 01:05:48 Config A/D Result=40 01:05:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:48 Get A/D filter: -9.255963e+061 result=40 01:05:48 Get A/D value=-858993460 result=40 01:05:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:05:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:05:48 Aux= 01:05:48 Message to Camera, serial 257318 queued 01:06:25 Received message from Master: op=PointingHead serial=257331 01:06:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:06:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:06:26 Point started: ret=0 01:06:26 point_skyscan result=0 01:06:26 Check angles 01:06:26 SkyScan query 01:06:27 SkyScan query done: ret=0 az=64.14<-4276 ze=66.54<-7564 Statuses=0009 0008 01:06:27 Msec=0 True Az=64.14 Ze=66.54 Az status=0009 Ze status=0008 01:06:27 Check angles 01:06:27 SkyScan query 01:06:28 SkyScan query done: ret=0 az=81.405<-5427 ze=66.495<-7567 Statuses=0009 0008 01:06:28 Msec=750 True Az=81.405 Ze=66.495 Az status=0009 Ze status=0008 01:06:28 Check angles 01:06:28 SkyScan query 01:06:28 SkyScan query done: ret=0 az=99.525<-6635 ze=66.495<-7567 Statuses=0009 0008 01:06:28 Msec=1500 True Az=99.525 Ze=66.495 Az status=0009 Ze status=0008 01:06:29 Check angles 01:06:29 SkyScan query 01:06:29 SkyScan query done: ret=0 az=117.39<-7826 ze=66.495<-7567 Statuses=0009 0008 01:06:29 Msec=2250 True Az=117.39 Ze=66.495 Az status=0009 Ze status=0008 01:06:29 Check angles 01:06:29 SkyScan query 01:06:30 SkyScan query done: ret=0 az=134.79<-8986 ze=66.495<-7567 Statuses=0009 0008 01:06:30 Msec=3000 True Az=134.79 Ze=66.495 Az status=0009 Ze status=0008 01:06:30 Check angles 01:06:30 SkyScan query 01:06:31 SkyScan query done: ret=0 az=152.055<-10137 ze=66.495<-7567 Statuses=0009 0008 01:06:31 Msec=3750 True Az=152.055 Ze=66.495 Az status=0009 Ze status=0008 01:06:31 Check angles 01:06:31 SkyScan query 01:06:31 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:06:31 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:06:31 Message to Master queued w/err=0: serial=257331 error=0 01:06:36 Received message from Master: op=Filter serial=257332 01:06:36 Color wheel filter change from 0 to 0 01:06:36 FLIGetFilterPos err=0 currentPosition=0 01:06:36 FLIGetStepsRemaining err=0 RemainingSteps=0 01:06:36 Filter is already there-color wheel unchanged 01:06:37 Received message from Master: op=Shutter serial=257333 01:06:37 Shutter LASER close 01:06:37 Received message from Camera: op=State serial=257335 01:06:37 GetSingleValue result=40 Value=cccccccc 01:06:37 SkyScan query 01:06:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:06:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:06:37 Parameters OK 01:06:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:06:37 Set A/D data flow result=40 01:06:37 Set A/D channel type result=40 01:06:37 Set A/D encoding result=40 01:06:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:06:37 Set channel filter=0.000000e+000 result=40 01:06:37 Config A/D Result=40 01:06:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:06:37 Get A/D filter: -9.255963e+061 result=40 01:06:37 Get A/D value=-858993460 result=40 01:06:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:06:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:06:37 Parameters OK 01:06:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:06:37 Set A/D data flow result=40 01:06:37 Set A/D channel type result=40 01:06:37 Set A/D encoding result=40 01:06:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:06:37 Set channel filter=0.000000e+000 result=40 01:06:37 Config A/D Result=40 01:06:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:06:37 Get A/D filter: -9.255963e+061 result=40 01:06:37 Get A/D value=-858993460 result=40 01:06:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:06:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:06:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:06:37 Aux= 01:06:37 Message to Camera, serial 257335 queued 01:07:14 Received message from Master: op=PointingHead serial=257348 01:07:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:07:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:07:14 Point started: ret=0 01:07:14 point_skyscan result=0 01:07:15 Check angles 01:07:15 SkyScan query 01:07:16 SkyScan query done: ret=0 az=134.805<-8987 ze=36.525<-9565 Statuses=0009 0009 01:07:16 Msec=0 True Az=134.805 Ze=36.525 Az status=0009 Ze status=0009 01:07:16 Check angles 01:07:16 SkyScan query 01:07:16 SkyScan query done: ret=0 az=117.33<-7822 ze=15.6<-10960 Statuses=0009 0009 01:07:16 Msec=750 True Az=117.33 Ze=15.6 Az status=0009 Ze status=0009 01:07:17 Check angles 01:07:17 SkyScan query 01:07:17 SkyScan query done: ret=0 az=99.615<-6641 ze=-5.835<-12389 Statuses=0009 0009 01:07:17 Msec=1500 True Az=99.615 Ze=-5.835 Az status=0009 Ze status=0009 01:07:17 Check angles 01:07:17 SkyScan query 01:07:18 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.805<-13787 Statuses=0009 0009 01:07:18 Msec=2250 True Az=82.14 Ze=-26.805 Az status=0009 Ze status=0009 01:07:18 Check angles 01:07:18 SkyScan query 01:07:19 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.58<-14572 Statuses=0009 0008 01:07:19 Msec=3000 True Az=64.62 Ze=-38.58 Az status=0009 Ze status=0008 01:07:19 Check angles 01:07:19 SkyScan query 01:07:19 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.52<-14568 Statuses=0009 0008 01:07:19 Msec=3750 True Az=47.16 Ze=-38.52 Az status=0009 Ze status=0008 01:07:20 Check angles 01:07:20 SkyScan query 01:07:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:07:20 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:07:20 Message to Master queued w/err=0: serial=257348 error=0 01:07:25 Received message from Master: op=Filter serial=257349 01:07:25 Color wheel filter change from 0 to 0 01:07:25 FLIGetFilterPos err=0 currentPosition=0 01:07:25 FLIGetStepsRemaining err=0 RemainingSteps=0 01:07:25 Filter is already there-color wheel unchanged 01:07:25 Received message from Master: op=Shutter serial=257350 01:07:25 Shutter LASER close 01:07:25 Received message from Camera: op=State serial=257352 01:07:25 GetSingleValue result=40 Value=cccccccc 01:07:25 SkyScan query 01:07:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:07:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:26 Parameters OK 01:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:26 Set A/D data flow result=40 01:07:26 Set A/D channel type result=40 01:07:26 Set A/D encoding result=40 01:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:26 Set channel filter=0.000000e+000 result=40 01:07:26 Config A/D Result=40 01:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:26 Get A/D filter: -9.255963e+061 result=40 01:07:26 Get A/D value=-858993460 result=40 01:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:26 Parameters OK 01:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:26 Set A/D data flow result=40 01:07:26 Set A/D channel type result=40 01:07:26 Set A/D encoding result=40 01:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:26 Set channel filter=0.000000e+000 result=40 01:07:26 Config A/D Result=40 01:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:26 Get A/D filter: -9.255963e+061 result=40 01:07:26 Get A/D value=-858993460 result=40 01:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:07:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:07:26 Aux= 01:07:26 Message to Camera, serial 257352 queued 01:08:03 Received message from Master: op=PointingHead serial=257365 01:08:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:08:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:08:03 Point started: ret=0 01:08:03 point_skyscan result=0 01:08:04 Check angles 01:08:04 SkyScan query 01:08:05 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.625<-16575 Statuses=0009 0009 01:08:05 Msec=0 True Az=64.2 Ze=-68.625 Az status=0009 Ze status=0009 01:08:05 Check angles 01:08:05 SkyScan query 01:08:05 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.595<-17973 Statuses=0009 0009 01:08:05 Msec=750 True Az=81.6 Ze=-89.595 Az status=0009 Ze status=0009 01:08:05 Check angles 01:08:05 SkyScan query 01:08:06 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.535<-19369 Statuses=0009 0009 01:08:06 Msec=1500 True Az=99.105 Ze=-110.535 Az status=0009 Ze status=0009 01:08:06 Check angles 01:08:06 SkyScan query 01:08:07 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.475<-20765 Statuses=0009 0009 01:08:07 Msec=2250 True Az=116.595 Ze=-131.475 Az status=0009 Ze status=0009 01:08:07 Check angles 01:08:07 SkyScan query 01:08:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 01:08:08 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 01:08:08 Check angles 01:08:08 SkyScan query 01:08:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 01:08:08 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 01:08:08 Message to Master queued w/err=0: serial=257365 error=0 01:08:13 Received message from Master: op=Filter serial=257366 01:08:13 Color wheel filter change from 0 to 0 01:08:13 FLIGetFilterPos err=0 currentPosition=0 01:08:13 FLIGetStepsRemaining err=0 RemainingSteps=0 01:08:13 Filter is already there-color wheel unchanged 01:08:13 Received message from Master: op=Shutter serial=257367 01:08:13 Shutter LASER close 01:08:14 Received message from Camera: op=State serial=257369 01:08:14 GetSingleValue result=40 Value=cccccccc 01:08:14 SkyScan query 01:08:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:08:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:14 Parameters OK 01:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:14 Set A/D data flow result=40 01:08:14 Set A/D channel type result=40 01:08:14 Set A/D encoding result=40 01:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:14 Set channel filter=0.000000e+000 result=40 01:08:14 Config A/D Result=40 01:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:14 Get A/D filter: -9.255963e+061 result=40 01:08:14 Get A/D value=-858993460 result=40 01:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:14 Parameters OK 01:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:14 Set A/D data flow result=40 01:08:14 Set A/D channel type result=40 01:08:14 Set A/D encoding result=40 01:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:14 Set channel filter=0.000000e+000 result=40 01:08:14 Config A/D Result=40 01:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:14 Get A/D filter: -9.255963e+061 result=40 01:08:14 Get A/D value=-858993460 result=40 01:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:08:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:08:14 Aux= 01:08:14 Message to Camera, serial 257369 queued 01:08:51 Received message from Master: op=PointingHead serial=257382 01:08:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:08:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:08:51 Point started: ret=0 01:08:51 point_skyscan result=0 01:08:52 Check angles 01:08:52 SkyScan query 01:08:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 01:08:53 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 01:08:53 Check angles 01:08:53 SkyScan query 01:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:08:53 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:08:53 Message to Master queued w/err=0: serial=257382 error=0 01:08:58 Received message from Master: op=Filter serial=257383 01:08:58 Color wheel filter change from 0 to 0 01:08:58 FLIGetFilterPos err=0 currentPosition=0 01:08:58 FLIGetStepsRemaining err=0 RemainingSteps=0 01:08:58 Filter is already there-color wheel unchanged 01:08:59 Received message from Master: op=Shutter serial=257384 01:08:59 Shutter LASER open 01:08:59 Received message from Camera: op=State serial=257386 01:08:59 GetSingleValue result=40 Value=cccccccc 01:08:59 SkyScan query 01:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:08:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:59 Parameters OK 01:08:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:59 Set A/D data flow result=40 01:08:59 Set A/D channel type result=40 01:08:59 Set A/D encoding result=40 01:08:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:59 Set channel filter=0.000000e+000 result=40 01:08:59 Config A/D Result=40 01:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:59 Get A/D filter: -9.255963e+061 result=40 01:08:59 Get A/D value=-858993460 result=40 01:08:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:59 Parameters OK 01:08:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:59 Set A/D data flow result=40 01:08:59 Set A/D channel type result=40 01:08:59 Set A/D encoding result=40 01:08:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:59 Set channel filter=0.000000e+000 result=40 01:08:59 Config A/D Result=40 01:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:59 Get A/D filter: -9.255963e+061 result=40 01:08:59 Get A/D value=-858993460 result=40 01:08:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:08:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:08:59 Aux= 01:08:59 Message to Camera, serial 257386 queued 01:09:08 Received message from Master: op=Shutter serial=257396 01:09:08 Shutter LASER close 01:09:08 Received message from Master: op=PointingHead serial=257400 01:09:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:09:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:09:09 Point started: ret=0 01:09:09 point_skyscan result=0 01:09:09 Check angles 01:09:09 SkyScan query 01:09:10 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.1<-21540 Statuses=0009 0009 01:09:10 Msec=0 True Az=136.11 Ze=-143.1 Az status=0009 Ze status=0009 01:09:10 Check angles 01:09:10 SkyScan query 01:09:11 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.13<-20142 Statuses=0009 0009 01:09:11 Msec=750 True Az=153.555 Ze=-122.13 Az status=0009 Ze status=0009 01:09:11 Check angles 01:09:11 SkyScan query 01:09:11 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.25<-18750 Statuses=0009 0009 01:09:11 Msec=1500 True Az=171.135 Ze=-101.25 Az status=0009 Ze status=0009 01:09:12 Check angles 01:09:12 SkyScan query 01:09:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.25<-17350 Statuses=0008 0009 01:09:12 Msec=2250 True Az=175.995 Ze=-80.25 Az status=0008 Ze status=0009 01:09:12 Check angles 01:09:12 SkyScan query 01:09:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.31<-15954 Statuses=0008 0009 01:09:13 Msec=3000 True Az=175.995 Ze=-59.31 Az status=0008 Ze status=0009 01:09:13 Check angles 01:09:13 SkyScan query 01:09:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 01:09:14 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 01:09:14 Message to Master queued w/err=0: serial=257400 error=0 01:09:19 Received message from Master: op=Filter serial=257401 01:09:19 Color wheel filter change from 0 to 0 01:09:19 FLIGetFilterPos err=0 currentPosition=0 01:09:19 FLIGetStepsRemaining err=0 RemainingSteps=0 01:09:19 Filter is already there-color wheel unchanged 01:09:19 Received message from Master: op=Shutter serial=257402 01:09:19 Shutter LASER close 01:09:19 Received message from Camera: op=State serial=257404 01:09:19 GetSingleValue result=40 Value=cccccccc 01:09:19 SkyScan query 01:09:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:09:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:20 Parameters OK 01:09:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:20 Set A/D data flow result=40 01:09:20 Set A/D channel type result=40 01:09:20 Set A/D encoding result=40 01:09:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:20 Set channel filter=0.000000e+000 result=40 01:09:20 Config A/D Result=40 01:09:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:20 Get A/D filter: -9.255963e+061 result=40 01:09:20 Get A/D value=-858993460 result=40 01:09:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:20 Parameters OK 01:09:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:20 Set A/D data flow result=40 01:09:20 Set A/D channel type result=40 01:09:20 Set A/D encoding result=40 01:09:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:20 Set channel filter=0.000000e+000 result=40 01:09:20 Config A/D Result=40 01:09:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:20 Get A/D filter: -9.255963e+061 result=40 01:09:20 Get A/D value=-858993460 result=40 01:09:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:09:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:09:20 Aux= 01:09:20 Message to Camera, serial 257404 queued 01:09:57 Received message from Master: op=PointingHead serial=257417 01:09:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:09:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:09:57 Point started: ret=0 01:09:57 point_skyscan result=0 01:09:58 Check angles 01:09:58 SkyScan query 01:09:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.66<-13444 Statuses=0008 0009 01:09:58 Msec=0 True Az=175.995 Ze=-21.66 Az status=0008 Ze status=0009 01:09:59 Check angles 01:09:59 SkyScan query 01:09:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.63<-12042 Statuses=0008 0009 01:09:59 Msec=750 True Az=175.995 Ze=-0.63 Az status=0008 Ze status=0009 01:09:59 Check angles 01:09:59 SkyScan query 01:10:00 SkyScan query done: ret=0 az=175.995<-11733 ze=20.235<-10651 Statuses=0008 0009 01:10:00 Msec=1500 True Az=175.995 Ze=20.235 Az status=0008 Ze status=0009 01:10:00 Check angles 01:10:00 SkyScan query 01:10:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.565<-9429 Statuses=0008 0009 01:10:01 Msec=2250 True Az=175.995 Ze=38.565 Az status=0008 Ze status=0009 01:10:01 Check angles 01:10:01 SkyScan query 01:10:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 01:10:01 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 01:10:01 Message to Master queued w/err=0: serial=257417 error=0 01:10:06 Received message from Master: op=Filter serial=257418 01:10:06 Color wheel filter change from 0 to 0 01:10:06 FLIGetFilterPos err=0 currentPosition=0 01:10:06 FLIGetStepsRemaining err=0 RemainingSteps=0 01:10:06 Filter is already there-color wheel unchanged 01:10:07 Received message from Master: op=Shutter serial=257419 01:10:07 Shutter LASER close 01:10:07 Received message from Camera: op=State serial=257421 01:10:07 GetSingleValue result=40 Value=cccccccc 01:10:07 SkyScan query 01:10:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:10:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:07 Parameters OK 01:10:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:07 Set A/D data flow result=40 01:10:07 Set A/D channel type result=40 01:10:07 Set A/D encoding result=40 01:10:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:07 Set channel filter=0.000000e+000 result=40 01:10:07 Config A/D Result=40 01:10:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:07 Get A/D filter: -9.255963e+061 result=40 01:10:07 Get A/D value=-858993460 result=40 01:10:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:07 Parameters OK 01:10:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:07 Set A/D data flow result=40 01:10:07 Set A/D channel type result=40 01:10:07 Set A/D encoding result=40 01:10:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:07 Set channel filter=0.000000e+000 result=40 01:10:07 Config A/D Result=40 01:10:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:07 Get A/D filter: -9.255963e+061 result=40 01:10:07 Get A/D value=-858993460 result=40 01:10:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:10:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:10:07 Aux= 01:10:07 Message to Camera, serial 257421 queued 01:10:44 Received message from Master: op=PointingHead serial=257434 01:10:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:10:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:10:44 Point started: ret=0 01:10:44 point_skyscan result=0 01:10:45 Check angles 01:10:45 SkyScan query 01:10:46 SkyScan query done: ret=0 az=152.85<-10190 ze=8.385<-11441 Statuses=0009 0009 01:10:46 Msec=0 True Az=152.85 Ze=8.385 Az status=0009 Ze status=0009 01:10:46 Check angles 01:10:46 SkyScan query 01:10:46 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.48<-12832 Statuses=0009 0009 01:10:46 Msec=750 True Az=135.33 Ze=-12.48 Az status=0009 Ze status=0009 01:10:47 Check angles 01:10:47 SkyScan query 01:10:47 SkyScan query done: ret=0 az=117.48<-7832 ze=-33.96<-14264 Statuses=0009 0009 01:10:47 Msec=1500 True Az=117.48 Ze=-33.96 Az status=0009 Ze status=0009 01:10:47 Check angles 01:10:47 SkyScan query 01:10:48 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.57<-15438 Statuses=0009 0009 01:10:48 Msec=2250 True Az=100.05 Ze=-51.57 Az status=0009 Ze status=0009 01:10:48 Check angles 01:10:48 SkyScan query 01:10:49 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:10:49 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:10:49 Check angles 01:10:49 SkyScan query 01:10:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:10:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:10:49 Message to Master queued w/err=0: serial=257434 error=0 01:10:54 Received message from Master: op=Filter serial=257435 01:10:54 Color wheel filter change from 0 to 0 01:10:54 FLIGetFilterPos err=0 currentPosition=0 01:10:54 FLIGetStepsRemaining err=0 RemainingSteps=0 01:10:54 Filter is already there-color wheel unchanged 01:10:55 Received message from Master: op=Shutter serial=257436 01:10:55 Shutter LASER close 01:10:55 Received message from Camera: op=State serial=257438 01:10:55 GetSingleValue result=40 Value=cccccccc 01:10:55 SkyScan query 01:10:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:10:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:55 Parameters OK 01:10:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:55 Set A/D data flow result=40 01:10:55 Set A/D channel type result=40 01:10:55 Set A/D encoding result=40 01:10:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:55 Set channel filter=0.000000e+000 result=40 01:10:55 Config A/D Result=40 01:10:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:55 Get A/D filter: -9.255963e+061 result=40 01:10:55 Get A/D value=-858993460 result=40 01:10:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:55 Parameters OK 01:10:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:55 Set A/D data flow result=40 01:10:55 Set A/D channel type result=40 01:10:55 Set A/D encoding result=40 01:10:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:55 Set channel filter=0.000000e+000 result=40 01:10:55 Config A/D Result=40 01:10:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:55 Get A/D filter: -9.255963e+061 result=40 01:10:55 Get A/D value=-858993460 result=40 01:10:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:10:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:10:55 Aux= 01:10:55 Message to Camera, serial 257438 queued 01:11:32 Received message from Master: op=PointingHead serial=257451 01:11:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:11:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:11:32 Point started: ret=0 01:11:32 point_skyscan result=0 01:11:33 Check angles 01:11:33 SkyScan query 01:11:34 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.405<-17427 Statuses=0009 0009 01:11:34 Msec=0 True Az=109.155 Ze=-81.405 Az status=0009 Ze status=0009 01:11:34 Check angles 01:11:34 SkyScan query 01:11:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.81<-18854 Statuses=0008 0009 01:11:35 Msec=750 True Az=112.995 Ze=-102.81 Az status=0008 Ze status=0009 01:11:35 Check angles 01:11:35 SkyScan query 01:11:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 01:11:35 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 01:11:35 Check angles 01:11:35 SkyScan query 01:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.72<-21648 Statuses=0008 0009 01:11:36 Msec=2250 True Az=112.995 Ze=-144.72 Az status=0008 Ze status=0009 01:11:36 Check angles 01:11:36 SkyScan query 01:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.69<-23046 Statuses=0008 0009 01:11:37 Msec=3000 True Az=112.995 Ze=-165.69 Az status=0008 Ze status=0009 01:11:37 Check angles 01:11:37 SkyScan query 01:11:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:11:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:11:38 Message to Master queued w/err=0: serial=257451 error=0 01:11:43 Received message from Master: op=Filter serial=257452 01:11:43 Color wheel filter change from 0 to 0 01:11:43 FLIGetFilterPos err=0 currentPosition=0 01:11:43 FLIGetStepsRemaining err=0 RemainingSteps=0 01:11:43 Filter is already there-color wheel unchanged 01:11:43 Received message from Master: op=Shutter serial=257453 01:11:43 Shutter LASER open 01:11:43 Received message from Camera: op=State serial=257455 01:11:43 GetSingleValue result=40 Value=cccccccc 01:11:43 SkyScan query 01:11:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:11:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:43 Parameters OK 01:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:43 Set A/D data flow result=40 01:11:43 Set A/D channel type result=40 01:11:43 Set A/D encoding result=40 01:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:43 Set channel filter=0.000000e+000 result=40 01:11:43 Config A/D Result=40 01:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:43 Get A/D filter: -9.255963e+061 result=40 01:11:43 Get A/D value=-858993460 result=40 01:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:43 Parameters OK 01:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:43 Set A/D data flow result=40 01:11:43 Set A/D channel type result=40 01:11:43 Set A/D encoding result=40 01:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:43 Set channel filter=0.000000e+000 result=40 01:11:43 Config A/D Result=40 01:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:43 Get A/D filter: -9.255963e+061 result=40 01:11:43 Get A/D value=-858993460 result=40 01:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:11:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:11:43 Aux= 01:11:43 Message to Camera, serial 257455 queued 01:11:52 Received message from Master: op=Shutter serial=257465 01:11:52 Shutter LASER close 01:11:52 Received message from Master: op=PointingHead serial=257469 01:11:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:11:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:11:53 Point started: ret=0 01:11:53 point_skyscan result=0 01:11:53 Check angles 01:11:53 SkyScan query 01:11:54 SkyScan query done: ret=0 az=90.045<-6003 ze=157.32<-1512 Statuses=0009 0009 01:11:54 Msec=0 True Az=90.045 Ze=157.32 Az status=0009 Ze status=0009 01:11:54 Check angles 01:11:54 SkyScan query 01:11:55 SkyScan query done: ret=0 az=72.525<-4835 ze=136.35<-2910 Statuses=0009 0009 01:11:55 Msec=750 True Az=72.525 Ze=136.35 Az status=0009 Ze status=0009 01:11:55 Check angles 01:11:55 SkyScan query 01:11:56 SkyScan query done: ret=0 az=55.2<-3680 ze=115.425<-4305 Statuses=0009 0009 01:11:56 Msec=1500 True Az=55.2 Ze=115.425 Az status=0009 Ze status=0009 01:11:56 Check angles 01:11:56 SkyScan query 01:11:56 SkyScan query done: ret=0 az=40.98<-2732 ze=94.425<-5705 Statuses=0009 0009 01:11:56 Msec=2250 True Az=40.98 Ze=94.425 Az status=0009 Ze status=0009 01:11:56 Check angles 01:11:56 SkyScan query 01:11:57 SkyScan query done: ret=0 az=40.995<-2733 ze=73.5<-7100 Statuses=0008 0009 01:11:57 Msec=3000 True Az=40.995 Ze=73.5 Az status=0008 Ze status=0009 01:11:57 Check angles 01:11:57 SkyScan query 01:11:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.89<-8474 Statuses=0008 0009 01:11:58 Msec=3750 True Az=40.995 Ze=52.89 Az status=0008 Ze status=0009 01:11:58 Check angles 01:11:58 SkyScan query 01:11:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:11:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:11:59 Message to Master queued w/err=0: serial=257469 error=0 01:12:04 Received message from Master: op=Filter serial=257470 01:12:04 Color wheel filter change from 0 to 0 01:12:04 FLIGetFilterPos err=0 currentPosition=0 01:12:04 FLIGetStepsRemaining err=0 RemainingSteps=0 01:12:04 Filter is already there-color wheel unchanged 01:12:04 Received message from Master: op=Shutter serial=257471 01:12:04 Shutter LASER close 01:12:04 Received message from Camera: op=State serial=257473 01:12:04 GetSingleValue result=40 Value=cccccccc 01:12:04 SkyScan query 01:12:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:12:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:04 Parameters OK 01:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:04 Set A/D data flow result=40 01:12:04 Set A/D channel type result=40 01:12:04 Set A/D encoding result=40 01:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:04 Set channel filter=0.000000e+000 result=40 01:12:04 Config A/D Result=40 01:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:04 Get A/D filter: -9.255963e+061 result=40 01:12:04 Get A/D value=-858993460 result=40 01:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:04 Parameters OK 01:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:04 Set A/D data flow result=40 01:12:04 Set A/D channel type result=40 01:12:04 Set A/D encoding result=40 01:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:04 Set channel filter=0.000000e+000 result=40 01:12:04 Config A/D Result=40 01:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:04 Get A/D filter: -9.255963e+061 result=40 01:12:04 Get A/D value=-858993460 result=40 01:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:12:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:12:04 Aux= 01:12:04 Message to Camera, serial 257473 queued 01:12:41 Received message from Master: op=PointingHead serial=257486 01:12:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:12:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:12:42 Point started: ret=0 01:12:42 point_skyscan result=0 01:12:42 Check angles 01:12:42 SkyScan query 01:12:43 SkyScan query done: ret=0 az=64.275<-4285 ze=66.555<-7563 Statuses=0009 0008 01:12:43 Msec=0 True Az=64.275 Ze=66.555 Az status=0009 Ze status=0008 01:12:43 Check angles 01:12:43 SkyScan query 01:12:44 SkyScan query done: ret=0 az=81.705<-5447 ze=66.495<-7567 Statuses=0009 0008 01:12:44 Msec=750 True Az=81.705 Ze=66.495 Az status=0009 Ze status=0008 01:12:44 Check angles 01:12:44 SkyScan query 01:12:44 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 01:12:44 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 01:12:45 Check angles 01:12:45 SkyScan query 01:12:45 SkyScan query done: ret=0 az=116.715<-7781 ze=66.495<-7567 Statuses=0009 0008 01:12:45 Msec=2250 True Az=116.715 Ze=66.495 Az status=0009 Ze status=0008 01:12:45 Check angles 01:12:45 SkyScan query 01:12:46 SkyScan query done: ret=0 az=134.1<-8940 ze=66.495<-7567 Statuses=0009 0008 01:12:46 Msec=3000 True Az=134.1 Ze=66.495 Az status=0009 Ze status=0008 01:12:46 Check angles 01:12:46 SkyScan query 01:12:47 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 01:12:47 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 01:12:47 Check angles 01:12:47 SkyScan query 01:12:47 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:12:47 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:12:47 Message to Master queued w/err=0: serial=257486 error=0 01:12:52 Received message from Master: op=Filter serial=257487 01:12:52 Color wheel filter change from 0 to 0 01:12:52 FLIGetFilterPos err=0 currentPosition=0 01:12:52 FLIGetStepsRemaining err=0 RemainingSteps=0 01:12:52 Filter is already there-color wheel unchanged 01:12:53 Received message from Master: op=Shutter serial=257488 01:12:53 Shutter LASER close 01:12:53 Received message from Camera: op=State serial=257490 01:12:53 GetSingleValue result=40 Value=cccccccc 01:12:53 SkyScan query 01:12:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:12:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:53 Parameters OK 01:12:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:53 Set A/D data flow result=40 01:12:53 Set A/D channel type result=40 01:12:53 Set A/D encoding result=40 01:12:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:53 Set channel filter=0.000000e+000 result=40 01:12:53 Config A/D Result=40 01:12:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:53 Get A/D filter: -9.255963e+061 result=40 01:12:53 Get A/D value=-858993460 result=40 01:12:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:53 Parameters OK 01:12:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:53 Set A/D data flow result=40 01:12:53 Set A/D channel type result=40 01:12:53 Set A/D encoding result=40 01:12:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:53 Set channel filter=0.000000e+000 result=40 01:12:53 Config A/D Result=40 01:12:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:53 Get A/D filter: -9.255963e+061 result=40 01:12:53 Get A/D value=-858993460 result=40 01:12:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:12:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:12:53 Aux= 01:12:53 Message to Camera, serial 257490 queued 01:13:29 Received message from Master: op=PointingHead serial=257502 01:13:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:13:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:13:29 Point started: ret=0 01:13:29 point_skyscan result=0 01:13:30 Check angles 01:13:30 SkyScan query 01:13:31 SkyScan query done: ret=0 az=134.985<-8999 ze=36.75<-9550 Statuses=0009 0009 01:13:31 Msec=0 True Az=134.985 Ze=36.75 Az status=0009 Ze status=0009 01:13:31 Check angles 01:13:31 SkyScan query 01:13:32 SkyScan query done: ret=0 az=117.51<-7834 ze=15.795<-10947 Statuses=0009 0009 01:13:32 Msec=750 True Az=117.51 Ze=15.795 Az status=0009 Ze status=0009 01:13:32 Check angles 01:13:32 SkyScan query 01:13:32 SkyScan query done: ret=0 az=99.735<-6649 ze=-5.58<-12372 Statuses=0009 0009 01:13:32 Msec=1500 True Az=99.735 Ze=-5.58 Az status=0009 Ze status=0009 01:13:32 Check angles 01:13:32 SkyScan query 01:13:33 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.55<-13770 Statuses=0009 0009 01:13:33 Msec=2250 True Az=82.26 Ze=-26.55 Az status=0009 Ze status=0009 01:13:33 Check angles 01:13:33 SkyScan query 01:13:34 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.58<-14572 Statuses=0009 0008 01:13:34 Msec=3000 True Az=64.695 Ze=-38.58 Az status=0009 Ze status=0008 01:13:34 Check angles 01:13:34 SkyScan query 01:13:35 SkyScan query done: ret=0 az=46.905<-3127 ze=-38.52<-14568 Statuses=0009 0008 01:13:35 Msec=3750 True Az=46.905 Ze=-38.52 Az status=0009 Ze status=0008 01:13:35 Check angles 01:13:35 SkyScan query 01:13:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:13:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:13:35 Message to Master queued w/err=0: serial=257502 error=0 01:13:40 Received message from Master: op=Filter serial=257503 01:13:40 Color wheel filter change from 0 to 0 01:13:40 FLIGetFilterPos err=0 currentPosition=0 01:13:40 FLIGetStepsRemaining err=0 RemainingSteps=0 01:13:40 Filter is already there-color wheel unchanged 01:13:41 Received message from Master: op=Shutter serial=257504 01:13:41 Shutter LASER close 01:13:41 Received message from Camera: op=State serial=257506 01:13:41 GetSingleValue result=40 Value=cccccccc 01:13:41 SkyScan query 01:13:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:13:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:41 Parameters OK 01:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:41 Set A/D data flow result=40 01:13:41 Set A/D channel type result=40 01:13:41 Set A/D encoding result=40 01:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:41 Set channel filter=0.000000e+000 result=40 01:13:41 Config A/D Result=40 01:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:41 Get A/D filter: -9.255963e+061 result=40 01:13:41 Get A/D value=-858993460 result=40 01:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:41 Parameters OK 01:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:41 Set A/D data flow result=40 01:13:41 Set A/D channel type result=40 01:13:41 Set A/D encoding result=40 01:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:41 Set channel filter=0.000000e+000 result=40 01:13:41 Config A/D Result=40 01:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:41 Get A/D filter: -9.255963e+061 result=40 01:13:41 Get A/D value=-858993460 result=40 01:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:13:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:13:41 Aux= 01:13:41 Message to Camera, serial 257506 queued 01:14:18 Received message from Master: op=PointingHead serial=257519 01:14:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:14:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:14:18 Point started: ret=0 01:14:18 point_skyscan result=0 01:14:19 Check angles 01:14:19 SkyScan query 01:14:20 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.025<-16535 Statuses=0009 0009 01:14:20 Msec=0 True Az=63.78 Ze=-68.025 Az status=0009 Ze status=0009 01:14:20 Check angles 01:14:20 SkyScan query 01:14:20 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.01<-17934 Statuses=0009 0009 01:14:20 Msec=750 True Az=81.285 Ze=-89.01 Az status=0009 Ze status=0009 01:14:21 Check angles 01:14:21 SkyScan query 01:14:21 SkyScan query done: ret=0 az=98.775<-6585 ze=-109.935<-19329 Statuses=0009 0009 01:14:21 Msec=1500 True Az=98.775 Ze=-109.935 Az status=0009 Ze status=0009 01:14:21 Check angles 01:14:21 SkyScan query 01:14:22 SkyScan query done: ret=0 az=116.145<-7743 ze=-130.92<-20728 Statuses=0009 0009 01:14:22 Msec=2250 True Az=116.145 Ze=-130.92 Az status=0009 Ze status=0009 01:14:22 Check angles 01:14:22 SkyScan query 01:14:23 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.555<-21437 Statuses=0009 0008 01:14:23 Msec=3000 True Az=130.965 Ze=-141.555 Az status=0009 Ze status=0008 01:14:23 Check angles 01:14:23 SkyScan query 01:14:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 01:14:23 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 01:14:23 Message to Master queued w/err=0: serial=257519 error=0 01:14:28 Received message from Master: op=Filter serial=257520 01:14:28 Color wheel filter change from 0 to 0 01:14:28 FLIGetFilterPos err=0 currentPosition=0 01:14:28 FLIGetStepsRemaining err=0 RemainingSteps=0 01:14:28 Filter is already there-color wheel unchanged 01:14:29 Received message from Master: op=Shutter serial=257521 01:14:29 Shutter LASER close 01:14:29 Received message from Camera: op=State serial=257523 01:14:29 GetSingleValue result=40 Value=cccccccc 01:14:29 SkyScan query 01:14:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:14:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:29 Parameters OK 01:14:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:29 Set A/D data flow result=40 01:14:29 Set A/D channel type result=40 01:14:29 Set A/D encoding result=40 01:14:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:29 Set channel filter=0.000000e+000 result=40 01:14:29 Config A/D Result=40 01:14:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:29 Get A/D filter: -9.255963e+061 result=40 01:14:29 Get A/D value=-858993460 result=40 01:14:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:29 Parameters OK 01:14:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:29 Set A/D data flow result=40 01:14:29 Set A/D channel type result=40 01:14:29 Set A/D encoding result=40 01:14:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:29 Set channel filter=0.000000e+000 result=40 01:14:29 Config A/D Result=40 01:14:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:29 Get A/D filter: -9.255963e+061 result=40 01:14:29 Get A/D value=-858993460 result=40 01:14:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:14:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:14:29 Aux= 01:14:29 Message to Camera, serial 257523 queued 01:15:05 Received message from Master: op=PointingHead serial=257535 01:15:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:15:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:15:05 Point started: ret=0 01:15:05 point_skyscan result=0 01:15:06 Check angles 01:15:06 SkyScan query 01:15:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 01:15:07 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 01:15:07 Check angles 01:15:07 SkyScan query 01:15:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:15:08 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:15:08 Message to Master queued w/err=0: serial=257535 error=0 01:15:13 Received message from Master: op=Filter serial=257536 01:15:13 Color wheel filter change from 0 to 0 01:15:13 FLIGetFilterPos err=0 currentPosition=0 01:15:13 FLIGetStepsRemaining err=0 RemainingSteps=0 01:15:13 Filter is already there-color wheel unchanged 01:15:13 Received message from Master: op=Shutter serial=257537 01:15:13 Shutter LASER open 01:15:13 Received message from Camera: op=State serial=257539 01:15:13 GetSingleValue result=40 Value=cccccccc 01:15:13 SkyScan query 01:15:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:15:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:13 Parameters OK 01:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:13 Set A/D data flow result=40 01:15:13 Set A/D channel type result=40 01:15:13 Set A/D encoding result=40 01:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:13 Set channel filter=0.000000e+000 result=40 01:15:13 Config A/D Result=40 01:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:13 Get A/D filter: -9.255963e+061 result=40 01:15:13 Get A/D value=-858993460 result=40 01:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:13 Parameters OK 01:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:13 Set A/D data flow result=40 01:15:13 Set A/D channel type result=40 01:15:13 Set A/D encoding result=40 01:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:13 Set channel filter=0.000000e+000 result=40 01:15:13 Config A/D Result=40 01:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:13 Get A/D filter: -9.255963e+061 result=40 01:15:13 Get A/D value=-858993460 result=40 01:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:15:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:15:13 Aux= 01:15:13 Message to Camera, serial 257539 queued 01:15:22 Received message from Master: op=Shutter serial=257549 01:15:22 Shutter LASER close 01:15:22 Received message from Master: op=PointingHead serial=257553 01:15:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:15:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:15:23 Point started: ret=0 01:15:23 point_skyscan result=0 01:15:24 Check angles 01:15:24 SkyScan query 01:15:24 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.37<-21558 Statuses=0009 0009 01:15:24 Msec=0 True Az=135.9 Ze=-143.37 Az status=0009 Ze status=0009 01:15:24 Check angles 01:15:24 SkyScan query 01:15:25 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.385<-20159 Statuses=0009 0009 01:15:25 Msec=750 True Az=153.435 Ze=-122.385 Az status=0009 Ze status=0009 01:15:25 Check angles 01:15:25 SkyScan query 01:15:26 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.52<-18768 Statuses=0009 0009 01:15:26 Msec=1500 True Az=170.895 Ze=-101.52 Az status=0009 Ze status=0009 01:15:26 Check angles 01:15:26 SkyScan query 01:15:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.49<-17366 Statuses=0008 0009 01:15:26 Msec=2250 True Az=175.995 Ze=-80.49 Az status=0008 Ze status=0009 01:15:27 Check angles 01:15:27 SkyScan query 01:15:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.565<-15971 Statuses=0008 0009 01:15:27 Msec=3000 True Az=175.995 Ze=-59.565 Az status=0008 Ze status=0009 01:15:27 Received message from Master: op=Identify serial=257554 01:15:27 Check angles 01:15:27 SkyScan query 01:15:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:15:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:15:28 Message to Master queued w/err=0: serial=257553 error=0 01:15:33 Received message from Master: op=Filter serial=257557 01:15:33 Color wheel filter change from 0 to 0 01:15:33 FLIGetFilterPos err=0 currentPosition=0 01:15:33 FLIGetStepsRemaining err=0 RemainingSteps=0 01:15:33 Filter is already there-color wheel unchanged [UTC 2018-12-19 01:15:33] 01:15:33 Received message from Master: op=Shutter serial=257558 01:15:33 Shutter LASER close 01:15:33 Received message from Camera: op=State serial=257560 01:15:33 GetSingleValue result=40 Value=cccccccc 01:15:33 SkyScan query 01:15:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:15:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:34 Parameters OK 01:15:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:34 Set A/D data flow result=40 01:15:34 Set A/D channel type result=40 01:15:34 Set A/D encoding result=40 01:15:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:34 Set channel filter=0.000000e+000 result=40 01:15:34 Config A/D Result=40 01:15:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:34 Get A/D filter: -9.255963e+061 result=40 01:15:34 Get A/D value=-858993460 result=40 01:15:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:34 Parameters OK 01:15:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:34 Set A/D data flow result=40 01:15:34 Set A/D channel type result=40 01:15:34 Set A/D encoding result=40 01:15:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:34 Set channel filter=0.000000e+000 result=40 01:15:34 Config A/D Result=40 01:15:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:34 Get A/D filter: -9.255963e+061 result=40 01:15:34 Get A/D value=-858993460 result=40 01:15:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:15:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:15:34 Aux= 01:15:34 Message to Camera, serial 257560 queued [UTC 2018-12-19 01:15:52] 01:16:11 Received message from Master: op=PointingHead serial=257573 01:16:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:16:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:16:11 Point started: ret=0 01:16:11 point_skyscan result=0 01:16:12 Check angles 01:16:12 SkyScan query 01:16:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.99<-13466 Statuses=0008 0009 01:16:12 Msec=0 True Az=175.995 Ze=-21.99 Az status=0008 Ze status=0009 01:16:13 Check angles 01:16:13 SkyScan query 01:16:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.54<-12036 Statuses=0008 0009 01:16:13 Msec=750 True Az=175.995 Ze=-0.54 Az status=0008 Ze status=0009 01:16:13 Check angles 01:16:13 SkyScan query 01:16:14 SkyScan query done: ret=0 az=175.995<-11733 ze=20.37<-10642 Statuses=0008 0009 01:16:14 Msec=1500 True Az=175.995 Ze=20.37 Az status=0008 Ze status=0009 01:16:14 Check angles 01:16:14 SkyScan query 01:16:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.58<-9428 Statuses=0008 0009 01:16:15 Msec=2250 True Az=175.995 Ze=38.58 Az status=0008 Ze status=0009 01:16:15 Check angles 01:16:15 SkyScan query 01:16:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 01:16:15 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 01:16:15 Message to Master queued w/err=0: serial=257573 error=0 01:16:20 Received message from Master: op=Filter serial=257574 01:16:20 Color wheel filter change from 0 to 0 01:16:20 FLIGetFilterPos err=0 currentPosition=0 01:16:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:16:20 Filter is already there-color wheel unchanged 01:16:21 Received message from Master: op=Shutter serial=257575 01:16:21 Shutter LASER close 01:16:21 Received message from Camera: op=State serial=257577 01:16:21 GetSingleValue result=40 Value=cccccccc 01:16:21 SkyScan query 01:16:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:16:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:21 Parameters OK 01:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:21 Set A/D data flow result=40 01:16:21 Set A/D channel type result=40 01:16:21 Set A/D encoding result=40 01:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:21 Set channel filter=0.000000e+000 result=40 01:16:21 Config A/D Result=40 01:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:21 Get A/D filter: -9.255963e+061 result=40 01:16:21 Get A/D value=-858993460 result=40 01:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:21 Parameters OK 01:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:21 Set A/D data flow result=40 01:16:21 Set A/D channel type result=40 01:16:21 Set A/D encoding result=40 01:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:21 Set channel filter=0.000000e+000 result=40 01:16:21 Config A/D Result=40 01:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:21 Get A/D filter: -9.255963e+061 result=40 01:16:21 Get A/D value=-858993460 result=40 01:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:16:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:16:21 Aux= 01:16:21 Message to Camera, serial 257577 queued 01:16:58 Received message from Master: op=PointingHead serial=257590 01:16:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:16:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:16:58 Point started: ret=0 01:16:58 point_skyscan result=0 01:16:59 Check angles 01:16:59 SkyScan query 01:17:00 SkyScan query done: ret=0 az=152.895<-10193 ze=8.43<-11438 Statuses=0009 0009 01:17:00 Msec=0 True Az=152.895 Ze=8.43 Az status=0009 Ze status=0009 01:17:00 Check angles 01:17:00 SkyScan query 01:17:01 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.45<-12830 Statuses=0009 0009 01:17:01 Msec=750 True Az=135.375 Ze=-12.45 Az status=0009 Ze status=0009 01:17:01 Check angles 01:17:01 SkyScan query 01:17:01 SkyScan query done: ret=0 az=117.84<-7856 ze=-33.435<-14229 Statuses=0009 0009 01:17:01 Msec=1500 True Az=117.84 Ze=-33.435 Az status=0009 Ze status=0009 01:17:01 Check angles 01:17:01 SkyScan query 01:17:02 SkyScan query done: ret=0 az=100.47<-6698 ze=-51.555<-15437 Statuses=0009 0009 01:17:02 Msec=2250 True Az=100.47 Ze=-51.555 Az status=0009 Ze status=0009 01:17:02 Check angles 01:17:02 SkyScan query 01:17:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 01:17:03 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 01:17:03 Check angles 01:17:03 SkyScan query 01:17:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:17:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:17:04 Message to Master queued w/err=0: serial=257590 error=0 01:17:09 Received message from Master: op=Filter serial=257591 01:17:09 Color wheel filter change from 0 to 0 01:17:09 FLIGetFilterPos err=0 currentPosition=0 01:17:09 FLIGetStepsRemaining err=0 RemainingSteps=0 01:17:09 Filter is already there-color wheel unchanged 01:17:09 Received message from Master: op=Shutter serial=257592 01:17:09 Shutter LASER close 01:17:09 Received message from Camera: op=State serial=257594 01:17:09 GetSingleValue result=40 Value=cccccccc 01:17:09 SkyScan query 01:17:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:17:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:09 Parameters OK 01:17:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:09 Set A/D data flow result=40 01:17:09 Set A/D channel type result=40 01:17:09 Set A/D encoding result=40 01:17:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:09 Set channel filter=0.000000e+000 result=40 01:17:09 Config A/D Result=40 01:17:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:09 Get A/D filter: -9.255963e+061 result=40 01:17:09 Get A/D value=-858993460 result=40 01:17:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:09 Parameters OK 01:17:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:09 Set A/D data flow result=40 01:17:09 Set A/D channel type result=40 01:17:09 Set A/D encoding result=40 01:17:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:09 Set channel filter=0.000000e+000 result=40 01:17:09 Config A/D Result=40 01:17:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:09 Get A/D filter: -9.255963e+061 result=40 01:17:09 Get A/D value=-858993460 result=40 01:17:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:17:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:17:09 Aux= 01:17:09 Message to Camera, serial 257594 queued 01:17:46 Received message from Master: op=PointingHead serial=257607 01:17:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:17:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:17:46 Point started: ret=0 01:17:46 point_skyscan result=0 01:17:47 Check angles 01:17:47 SkyScan query 01:17:48 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.48<-17432 Statuses=0009 0009 01:17:48 Msec=0 True Az=109.155 Ze=-81.48 Az status=0009 Ze status=0009 01:17:48 Check angles 01:17:48 SkyScan query 01:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.855<-18857 Statuses=0008 0009 01:17:49 Msec=750 True Az=112.995 Ze=-102.855 Az status=0008 Ze status=0009 01:17:49 Check angles 01:17:49 SkyScan query 01:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 01:17:49 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 01:17:49 Check angles 01:17:49 SkyScan query 01:17:50 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.75<-21650 Statuses=0008 0009 01:17:50 Msec=2250 True Az=112.98 Ze=-144.75 Az status=0008 Ze status=0009 01:17:50 Check angles 01:17:50 SkyScan query 01:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.17<-23078 Statuses=0008 0009 01:17:51 Msec=3000 True Az=112.995 Ze=-166.17 Az status=0008 Ze status=0009 01:17:51 Check angles 01:17:51 SkyScan query 01:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:17:52 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:17:52 Message to Master queued w/err=0: serial=257607 error=0 01:17:57 Received message from Master: op=Filter serial=257608 01:17:57 Color wheel filter change from 0 to 0 01:17:57 FLIGetFilterPos err=0 currentPosition=0 01:17:57 FLIGetStepsRemaining err=0 RemainingSteps=0 01:17:57 Filter is already there-color wheel unchanged 01:17:57 Received message from Master: op=Shutter serial=257609 01:17:57 Shutter LASER open 01:17:57 Received message from Camera: op=State serial=257611 01:17:57 GetSingleValue result=40 Value=cccccccc 01:17:57 SkyScan query 01:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:17:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:58 Parameters OK 01:17:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:58 Set A/D data flow result=40 01:17:58 Set A/D channel type result=40 01:17:58 Set A/D encoding result=40 01:17:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:58 Set channel filter=0.000000e+000 result=40 01:17:58 Config A/D Result=40 01:17:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:58 Get A/D filter: -9.255963e+061 result=40 01:17:58 Get A/D value=-858993460 result=40 01:17:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:58 Parameters OK 01:17:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:58 Set A/D data flow result=40 01:17:58 Set A/D channel type result=40 01:17:58 Set A/D encoding result=40 01:17:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:58 Set channel filter=0.000000e+000 result=40 01:17:58 Config A/D Result=40 01:17:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:58 Get A/D filter: -9.255963e+061 result=40 01:17:58 Get A/D value=-858993460 result=40 01:17:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:17:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:17:58 Aux= 01:17:58 Message to Camera, serial 257611 queued 01:18:06 Received message from Master: op=Shutter serial=257621 01:18:06 Shutter LASER close 01:18:06 Received message from Master: op=PointingHead serial=257625 01:18:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:18:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:18:07 Point started: ret=0 01:18:07 point_skyscan result=0 01:18:08 Check angles 01:18:08 SkyScan query 01:18:08 SkyScan query done: ret=0 az=89.64<-5976 ze=157.065<-1529 Statuses=0009 0009 01:18:08 Msec=0 True Az=89.64 Ze=157.065 Az status=0009 Ze status=0009 01:18:08 Check angles 01:18:08 SkyScan query 01:18:09 SkyScan query done: ret=0 az=72.225<-4815 ze=136.125<-2925 Statuses=0009 0009 01:18:09 Msec=750 True Az=72.225 Ze=136.125 Az status=0009 Ze status=0009 01:18:09 Check angles 01:18:09 SkyScan query 01:18:10 SkyScan query done: ret=0 az=54.855<-3657 ze=115.185<-4321 Statuses=0009 0009 01:18:10 Msec=1500 True Az=54.855 Ze=115.185 Az status=0009 Ze status=0009 01:18:10 Check angles 01:18:10 SkyScan query 01:18:10 SkyScan query done: ret=0 az=40.995<-2733 ze=94.185<-5721 Statuses=0009 0009 01:18:10 Msec=2250 True Az=40.995 Ze=94.185 Az status=0009 Ze status=0009 01:18:11 Check angles 01:18:11 SkyScan query 01:18:11 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 01:18:11 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 01:18:11 Check angles 01:18:11 SkyScan query 01:18:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 01:18:12 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 01:18:12 Check angles 01:18:12 SkyScan query 01:18:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:18:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:18:13 Message to Master queued w/err=0: serial=257625 error=0 01:18:18 Received message from Master: op=Filter serial=257626 01:18:18 Color wheel filter change from 0 to 0 01:18:18 FLIGetFilterPos err=0 currentPosition=0 01:18:18 FLIGetStepsRemaining err=0 RemainingSteps=0 01:18:18 Filter is already there-color wheel unchanged 01:18:18 Received message from Master: op=Shutter serial=257627 01:18:18 Shutter LASER close 01:18:18 Received message from Camera: op=State serial=257629 01:18:18 GetSingleValue result=40 Value=cccccccc 01:18:18 SkyScan query 01:18:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:18:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:19 Parameters OK 01:18:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:19 Set A/D data flow result=40 01:18:19 Set A/D channel type result=40 01:18:19 Set A/D encoding result=40 01:18:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:19 Set channel filter=0.000000e+000 result=40 01:18:19 Config A/D Result=40 01:18:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:19 Get A/D filter: -9.255963e+061 result=40 01:18:19 Get A/D value=-858993460 result=40 01:18:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:19 Parameters OK 01:18:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:19 Set A/D data flow result=40 01:18:19 Set A/D channel type result=40 01:18:19 Set A/D encoding result=40 01:18:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:19 Set channel filter=0.000000e+000 result=40 01:18:19 Config A/D Result=40 01:18:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:19 Get A/D filter: -9.255963e+061 result=40 01:18:19 Get A/D value=-858993460 result=40 01:18:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:18:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:18:19 Aux= 01:18:19 Message to Camera, serial 257629 queued 01:18:55 Received message from Master: op=PointingHead serial=257642 01:18:55 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:18:55 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:18:56 Point started: ret=0 01:18:56 point_skyscan result=0 01:18:57 Check angles 01:18:57 SkyScan query 01:18:57 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 01:18:57 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 01:18:57 Check angles 01:18:57 SkyScan query 01:18:58 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 01:18:58 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 01:18:58 Check angles 01:18:58 SkyScan query 01:18:59 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 01:18:59 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 01:18:59 Check angles 01:18:59 SkyScan query 01:18:59 SkyScan query done: ret=0 az=116.55<-7770 ze=66.495<-7567 Statuses=0009 0008 01:18:59 Msec=2250 True Az=116.55 Ze=66.495 Az status=0009 Ze status=0008 01:19:00 Check angles 01:19:00 SkyScan query 01:19:00 SkyScan query done: ret=0 az=133.935<-8929 ze=66.495<-7567 Statuses=0009 0008 01:19:00 Msec=3000 True Az=133.935 Ze=66.495 Az status=0009 Ze status=0008 01:19:00 Check angles 01:19:00 SkyScan query 01:19:01 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 01:19:01 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 01:19:01 Check angles 01:19:01 SkyScan query 01:19:02 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:19:02 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:19:02 Message to Master queued w/err=0: serial=257642 error=0 01:19:07 Received message from Master: op=Filter serial=257643 01:19:07 Color wheel filter change from 0 to 0 01:19:07 FLIGetFilterPos err=0 currentPosition=0 01:19:07 FLIGetStepsRemaining err=0 RemainingSteps=0 01:19:07 Filter is already there-color wheel unchanged 01:19:07 Received message from Master: op=Shutter serial=257644 01:19:07 Shutter LASER close 01:19:07 Received message from Camera: op=State serial=257646 01:19:07 GetSingleValue result=40 Value=cccccccc 01:19:07 SkyScan query 01:19:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:19:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:07 Parameters OK 01:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:07 Set A/D data flow result=40 01:19:07 Set A/D channel type result=40 01:19:07 Set A/D encoding result=40 01:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:07 Set channel filter=0.000000e+000 result=40 01:19:07 Config A/D Result=40 01:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:07 Get A/D filter: -9.255963e+061 result=40 01:19:07 Get A/D value=-858993460 result=40 01:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:07 Parameters OK 01:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:07 Set A/D data flow result=40 01:19:07 Set A/D channel type result=40 01:19:07 Set A/D encoding result=40 01:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:07 Set channel filter=0.000000e+000 result=40 01:19:07 Config A/D Result=40 01:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:07 Get A/D filter: -9.255963e+061 result=40 01:19:07 Get A/D value=-858993460 result=40 01:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:07 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:19:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:19:07 Aux= 01:19:07 Message to Camera, serial 257646 queued 01:19:44 Received message from Master: op=PointingHead serial=257659 01:19:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:19:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:19:45 Point started: ret=0 01:19:45 point_skyscan result=0 01:19:45 Check angles 01:19:45 SkyScan query 01:19:46 SkyScan query done: ret=0 az=134.76<-8984 ze=36.48<-9568 Statuses=0009 0009 01:19:46 Msec=0 True Az=134.76 Ze=36.48 Az status=0009 Ze status=0009 01:19:46 Check angles 01:19:46 SkyScan query 01:19:47 SkyScan query done: ret=0 az=116.955<-7797 ze=15.06<-10996 Statuses=0009 0009 01:19:47 Msec=750 True Az=116.955 Ze=15.06 Az status=0009 Ze status=0009 01:19:47 Check angles 01:19:47 SkyScan query 01:19:47 SkyScan query done: ret=0 az=99.51<-6634 ze=-5.925<-12395 Statuses=0009 0009 01:19:47 Msec=1500 True Az=99.51 Ze=-5.925 Az status=0009 Ze status=0009 01:19:48 Check angles 01:19:48 SkyScan query 01:19:48 SkyScan query done: ret=0 az=81.72<-5448 ze=-27.375<-13825 Statuses=0009 0009 01:19:48 Msec=2250 True Az=81.72 Ze=-27.375 Az status=0009 Ze status=0009 01:19:48 Check angles 01:19:48 SkyScan query 01:19:49 SkyScan query done: ret=0 az=63.81<-4254 ze=-38.58<-14572 Statuses=0009 0008 01:19:49 Msec=3000 True Az=63.81 Ze=-38.58 Az status=0009 Ze status=0008 01:19:49 Check angles 01:19:49 SkyScan query 01:19:50 SkyScan query done: ret=0 az=46.065<-3071 ze=-38.52<-14568 Statuses=0009 0008 01:19:50 Msec=3750 True Az=46.065 Ze=-38.52 Az status=0009 Ze status=0008 01:19:50 Check angles 01:19:50 SkyScan query 01:19:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:19:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:19:50 Message to Master queued w/err=0: serial=257659 error=0 01:19:55 Received message from Master: op=Filter serial=257660 01:19:55 Color wheel filter change from 0 to 0 01:19:55 FLIGetFilterPos err=0 currentPosition=0 01:19:55 FLIGetStepsRemaining err=0 RemainingSteps=0 01:19:55 Filter is already there-color wheel unchanged 01:19:56 Received message from Master: op=Shutter serial=257661 01:19:56 Shutter LASER close 01:19:56 Received message from Camera: op=State serial=257663 01:19:56 GetSingleValue result=40 Value=cccccccc 01:19:56 SkyScan query 01:19:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:19:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:56 Parameters OK 01:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:56 Set A/D data flow result=40 01:19:56 Set A/D channel type result=40 01:19:56 Set A/D encoding result=40 01:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:56 Set channel filter=0.000000e+000 result=40 01:19:56 Config A/D Result=40 01:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:56 Get A/D filter: -9.255963e+061 result=40 01:19:56 Get A/D value=-858993460 result=40 01:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:56 Parameters OK 01:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:56 Set A/D data flow result=40 01:19:56 Set A/D channel type result=40 01:19:56 Set A/D encoding result=40 01:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:56 Set channel filter=0.000000e+000 result=40 01:19:56 Config A/D Result=40 01:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:56 Get A/D filter: -9.255963e+061 result=40 01:19:56 Get A/D value=-858993460 result=40 01:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:19:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:19:56 Aux= 01:19:56 Message to Camera, serial 257663 queued 01:20:33 Received message from Master: op=PointingHead serial=257676 01:20:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:20:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:20:33 Point started: ret=0 01:20:33 point_skyscan result=0 01:20:34 Check angles 01:20:34 SkyScan query 01:20:35 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.82<-16588 Statuses=0009 0009 01:20:35 Msec=0 True Az=64.425 Ze=-68.82 Az status=0009 Ze status=0009 01:20:35 Check angles 01:20:35 SkyScan query 01:20:36 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.775<-17985 Statuses=0009 0009 01:20:36 Msec=750 True Az=81.825 Ze=-89.775 Az status=0009 Ze status=0009 01:20:36 Check angles 01:20:36 SkyScan query 01:20:36 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.73<-19382 Statuses=0009 0009 01:20:36 Msec=1500 True Az=99.405 Ze=-110.73 Az status=0009 Ze status=0009 01:20:37 Check angles 01:20:37 SkyScan query 01:20:37 SkyScan query done: ret=0 az=117.3<-7820 ze=-132.06<-20804 Statuses=0009 0009 01:20:37 Msec=2250 True Az=117.3 Ze=-132.06 Az status=0009 Ze status=0009 01:20:37 Check angles 01:20:37 SkyScan query 01:20:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 01:20:38 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 01:20:38 Check angles 01:20:38 SkyScan query 01:20:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 01:20:39 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 01:20:39 Message to Master queued w/err=0: serial=257676 error=0 01:20:44 Received message from Master: op=Filter serial=257677 01:20:44 Color wheel filter change from 0 to 0 01:20:44 FLIGetFilterPos err=0 currentPosition=0 01:20:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:20:44 Filter is already there-color wheel unchanged 01:20:44 Received message from Master: op=Shutter serial=257678 01:20:44 Shutter LASER close 01:20:44 Received message from Camera: op=State serial=257680 01:20:44 GetSingleValue result=40 Value=cccccccc 01:20:44 SkyScan query 01:20:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:20:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:44 Parameters OK 01:20:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:44 Set A/D data flow result=40 01:20:44 Set A/D channel type result=40 01:20:44 Set A/D encoding result=40 01:20:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:44 Set channel filter=0.000000e+000 result=40 01:20:44 Config A/D Result=40 01:20:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:44 Get A/D filter: -9.255963e+061 result=40 01:20:44 Get A/D value=-858993460 result=40 01:20:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:44 Parameters OK 01:20:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:44 Set A/D data flow result=40 01:20:44 Set A/D channel type result=40 01:20:44 Set A/D encoding result=40 01:20:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:44 Set channel filter=0.000000e+000 result=40 01:20:44 Config A/D Result=40 01:20:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:44 Get A/D filter: -9.255963e+061 result=40 01:20:44 Get A/D value=-858993460 result=40 01:20:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:20:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:20:44 Aux= 01:20:44 Message to Camera, serial 257680 queued 01:21:21 Received message from Master: op=PointingHead serial=257693 01:21:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:21:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:21:22 Point started: ret=0 01:21:22 point_skyscan result=0 01:21:22 Check angles 01:21:22 SkyScan query 01:21:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 01:21:23 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 01:21:23 Check angles 01:21:23 SkyScan query 01:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:21:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:21:24 Message to Master queued w/err=0: serial=257693 error=0 01:21:29 Received message from Master: op=Filter serial=257694 01:21:29 Color wheel filter change from 0 to 0 01:21:29 FLIGetFilterPos err=0 currentPosition=0 01:21:29 FLIGetStepsRemaining err=0 RemainingSteps=0 01:21:29 Filter is already there-color wheel unchanged 01:21:29 Received message from Master: op=Shutter serial=257695 01:21:29 Shutter LASER open 01:21:29 Received message from Camera: op=State serial=257697 01:21:29 GetSingleValue result=40 Value=cccccccc 01:21:29 SkyScan query 01:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:21:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:30 Parameters OK 01:21:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:30 Set A/D data flow result=40 01:21:30 Set A/D channel type result=40 01:21:30 Set A/D encoding result=40 01:21:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:30 Set channel filter=0.000000e+000 result=40 01:21:30 Config A/D Result=40 01:21:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:30 Get A/D filter: -9.255963e+061 result=40 01:21:30 Get A/D value=-858993460 result=40 01:21:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:30 Parameters OK 01:21:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:30 Set A/D data flow result=40 01:21:30 Set A/D channel type result=40 01:21:30 Set A/D encoding result=40 01:21:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:30 Set channel filter=0.000000e+000 result=40 01:21:30 Config A/D Result=40 01:21:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:30 Get A/D filter: -9.255963e+061 result=40 01:21:30 Get A/D value=-858993460 result=40 01:21:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:21:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:21:30 Aux= 01:21:30 Message to Camera, serial 257697 queued 01:21:38 Received message from Master: op=Shutter serial=257707 01:21:38 Shutter LASER close 01:21:39 Received message from Master: op=PointingHead serial=257711 01:21:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:21:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:21:39 Point started: ret=0 01:21:39 point_skyscan result=0 01:21:40 Check angles 01:21:40 SkyScan query 01:21:40 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.355<-21557 Statuses=0009 0009 01:21:40 Msec=0 True Az=135.84 Ze=-143.355 Az status=0009 Ze status=0009 01:21:40 Check angles 01:21:40 SkyScan query 01:21:41 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.25<-20150 Statuses=0009 0009 01:21:41 Msec=750 True Az=153.45 Ze=-122.25 Az status=0009 Ze status=0009 01:21:41 Check angles 01:21:41 SkyScan query 01:21:42 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.49<-18766 Statuses=0009 0009 01:21:42 Msec=1500 True Az=170.835 Ze=-101.49 Az status=0009 Ze status=0009 01:21:42 Check angles 01:21:42 SkyScan query 01:21:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.475<-17365 Statuses=0008 0009 01:21:43 Msec=2250 True Az=175.995 Ze=-80.475 Az status=0008 Ze status=0009 01:21:43 Check angles 01:21:43 SkyScan query 01:21:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.55<-15970 Statuses=0008 0009 01:21:43 Msec=3000 True Az=175.995 Ze=-59.55 Az status=0008 Ze status=0009 01:21:43 Check angles 01:21:43 SkyScan query 01:21:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:21:44 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:21:44 Message to Master queued w/err=0: serial=257711 error=0 01:21:49 Received message from Master: op=Filter serial=257712 01:21:49 Color wheel filter change from 0 to 0 01:21:49 FLIGetFilterPos err=0 currentPosition=0 01:21:49 FLIGetStepsRemaining err=0 RemainingSteps=0 01:21:49 Filter is already there-color wheel unchanged 01:21:49 Received message from Master: op=Shutter serial=257713 01:21:49 Shutter LASER close 01:21:49 Received message from Camera: op=State serial=257715 01:21:49 GetSingleValue result=40 Value=cccccccc 01:21:49 SkyScan query 01:21:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:21:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:50 Parameters OK 01:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:50 Set A/D data flow result=40 01:21:50 Set A/D channel type result=40 01:21:50 Set A/D encoding result=40 01:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:50 Set channel filter=0.000000e+000 result=40 01:21:50 Config A/D Result=40 01:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:50 Get A/D filter: -9.255963e+061 result=40 01:21:50 Get A/D value=-858993460 result=40 01:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:50 Parameters OK 01:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:50 Set A/D data flow result=40 01:21:50 Set A/D channel type result=40 01:21:50 Set A/D encoding result=40 01:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:50 Set channel filter=0.000000e+000 result=40 01:21:50 Config A/D Result=40 01:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:50 Get A/D filter: -9.255963e+061 result=40 01:21:50 Get A/D value=-858993460 result=40 01:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:21:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:21:50 Aux= 01:21:50 Message to Camera, serial 257715 queued 01:22:27 Received message from Master: op=PointingHead serial=257728 01:22:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:22:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:22:27 Point started: ret=0 01:22:27 point_skyscan result=0 01:22:28 Check angles 01:22:28 SkyScan query 01:22:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.6<-13440 Statuses=0008 0009 01:22:29 Msec=0 True Az=175.995 Ze=-21.6 Az status=0008 Ze status=0009 01:22:29 Check angles 01:22:29 SkyScan query 01:22:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.6<-12040 Statuses=0008 0009 01:22:29 Msec=750 True Az=175.995 Ze=-0.6 Az status=0008 Ze status=0009 01:22:29 Check angles 01:22:29 SkyScan query 01:22:30 SkyScan query done: ret=0 az=175.995<-11733 ze=20.775<-10615 Statuses=0008 0009 01:22:30 Msec=1500 True Az=175.995 Ze=20.775 Az status=0008 Ze status=0009 01:22:30 Check angles 01:22:30 SkyScan query 01:22:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 01:22:31 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 01:22:31 Check angles 01:22:31 SkyScan query 01:22:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 01:22:32 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 01:22:32 Message to Master queued w/err=0: serial=257728 error=0 01:22:37 Received message from Master: op=Filter serial=257729 01:22:37 Color wheel filter change from 0 to 0 01:22:37 FLIGetFilterPos err=0 currentPosition=0 01:22:37 FLIGetStepsRemaining err=0 RemainingSteps=0 01:22:37 Filter is already there-color wheel unchanged 01:22:37 Received message from Master: op=Shutter serial=257730 01:22:37 Shutter LASER close 01:22:37 Received message from Camera: op=State serial=257732 01:22:37 GetSingleValue result=40 Value=cccccccc 01:22:37 SkyScan query 01:22:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:22:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:37 Parameters OK 01:22:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:37 Set A/D data flow result=40 01:22:37 Set A/D channel type result=40 01:22:37 Set A/D encoding result=40 01:22:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:37 Set channel filter=0.000000e+000 result=40 01:22:37 Config A/D Result=40 01:22:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:37 Get A/D filter: -9.255963e+061 result=40 01:22:37 Get A/D value=-858993460 result=40 01:22:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:37 Parameters OK 01:22:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:37 Set A/D data flow result=40 01:22:37 Set A/D channel type result=40 01:22:37 Set A/D encoding result=40 01:22:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:37 Set channel filter=0.000000e+000 result=40 01:22:37 Config A/D Result=40 01:22:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:37 Get A/D filter: -9.255963e+061 result=40 01:22:37 Get A/D value=-858993460 result=40 01:22:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:22:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:22:37 Aux= 01:22:37 Message to Camera, serial 257732 queued 01:23:14 Received message from Master: op=PointingHead serial=257745 01:23:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:23:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:23:15 Point started: ret=0 01:23:15 point_skyscan result=0 01:23:15 Check angles 01:23:15 SkyScan query 01:23:16 SkyScan query done: ret=0 az=153.225<-10215 ze=8.985<-11401 Statuses=0009 0009 01:23:16 Msec=0 True Az=153.225 Ze=8.985 Az status=0009 Ze status=0009 01:23:16 Check angles 01:23:16 SkyScan query 01:23:17 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.015<-12801 Statuses=0009 0009 01:23:17 Msec=750 True Az=135.765 Ze=-12.015 Az status=0009 Ze status=0009 01:23:17 Check angles 01:23:17 SkyScan query 01:23:17 SkyScan query done: ret=0 az=118.245<-7883 ze=-32.955<-14197 Statuses=0009 0009 01:23:17 Msec=1500 True Az=118.245 Ze=-32.955 Az status=0009 Ze status=0009 01:23:18 Check angles 01:23:18 SkyScan query 01:23:18 SkyScan query done: ret=0 az=100.845<-6723 ze=-51.495<-15433 Statuses=0009 0009 01:23:18 Msec=2250 True Az=100.845 Ze=-51.495 Az status=0009 Ze status=0009 01:23:18 Check angles 01:23:18 SkyScan query 01:23:19 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 01:23:19 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 01:23:19 Check angles 01:23:19 SkyScan query 01:23:20 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 01:23:20 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 01:23:20 Message to Master queued w/err=0: serial=257745 error=0 01:23:25 Received message from Master: op=Filter serial=257746 01:23:25 Color wheel filter change from 0 to 0 01:23:25 FLIGetFilterPos err=0 currentPosition=0 01:23:25 FLIGetStepsRemaining err=0 RemainingSteps=0 01:23:25 Filter is already there-color wheel unchanged 01:23:25 Received message from Master: op=Shutter serial=257747 01:23:25 Shutter LASER close 01:23:25 Received message from Camera: op=State serial=257749 01:23:25 GetSingleValue result=40 Value=cccccccc 01:23:25 SkyScan query 01:23:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:23:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:25 Parameters OK 01:23:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:25 Set A/D data flow result=40 01:23:25 Set A/D channel type result=40 01:23:25 Set A/D encoding result=40 01:23:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:25 Set channel filter=0.000000e+000 result=40 01:23:25 Config A/D Result=40 01:23:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:25 Get A/D filter: -9.255963e+061 result=40 01:23:25 Get A/D value=-858993460 result=40 01:23:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:25 Parameters OK 01:23:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:25 Set A/D data flow result=40 01:23:25 Set A/D channel type result=40 01:23:25 Set A/D encoding result=40 01:23:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:25 Set channel filter=0.000000e+000 result=40 01:23:25 Config A/D Result=40 01:23:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:25 Get A/D filter: -9.255963e+061 result=40 01:23:25 Get A/D value=-858993460 result=40 01:23:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:23:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:23:25 Aux= 01:23:25 Message to Camera, serial 257749 queued 01:24:02 Received message from Master: op=PointingHead serial=257762 01:24:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:24:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:24:03 Point started: ret=0 01:24:03 point_skyscan result=0 01:24:03 Check angles 01:24:03 SkyScan query 01:24:04 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.135<-17409 Statuses=0009 0009 01:24:04 Msec=0 True Az=108.885 Ze=-81.135 Az status=0009 Ze status=0009 01:24:04 Check angles 01:24:04 SkyScan query 01:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 01:24:05 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 01:24:05 Check angles 01:24:05 SkyScan query 01:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.075<-20205 Statuses=0008 0009 01:24:05 Msec=1500 True Az=112.995 Ze=-123.075 Az status=0008 Ze status=0009 01:24:06 Check angles 01:24:06 SkyScan query 01:24:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.03<-21602 Statuses=0008 0009 01:24:06 Msec=2250 True Az=112.995 Ze=-144.03 Az status=0008 Ze status=0009 01:24:06 Check angles 01:24:06 SkyScan query 01:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 01:24:07 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 01:24:07 Check angles 01:24:07 SkyScan query 01:24:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:24:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:24:08 Message to Master queued w/err=0: serial=257762 error=0 01:24:13 Received message from Master: op=Filter serial=257763 01:24:13 Color wheel filter change from 0 to 0 01:24:13 FLIGetFilterPos err=0 currentPosition=0 01:24:13 FLIGetStepsRemaining err=0 RemainingSteps=0 01:24:13 Filter is already there-color wheel unchanged 01:24:13 Received message from Master: op=Shutter serial=257764 01:24:13 Shutter LASER open 01:24:13 Received message from Camera: op=State serial=257766 01:24:13 GetSingleValue result=40 Value=cccccccc 01:24:13 SkyScan query 01:24:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:24:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:14 Parameters OK 01:24:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:14 Set A/D data flow result=40 01:24:14 Set A/D channel type result=40 01:24:14 Set A/D encoding result=40 01:24:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:14 Set channel filter=0.000000e+000 result=40 01:24:14 Config A/D Result=40 01:24:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:14 Get A/D filter: -9.255963e+061 result=40 01:24:14 Get A/D value=-858993460 result=40 01:24:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:14 Parameters OK 01:24:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:14 Set A/D data flow result=40 01:24:14 Set A/D channel type result=40 01:24:14 Set A/D encoding result=40 01:24:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:14 Set channel filter=0.000000e+000 result=40 01:24:14 Config A/D Result=40 01:24:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:14 Get A/D filter: -9.255963e+061 result=40 01:24:14 Get A/D value=-858993460 result=40 01:24:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:24:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:24:14 Aux= 01:24:14 Message to Camera, serial 257766 queued 01:24:22 Received message from Master: op=Shutter serial=257776 01:24:22 Shutter LASER close 01:24:23 Received message from Master: op=PointingHead serial=257780 01:24:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:24:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:24:23 Point started: ret=0 01:24:23 point_skyscan result=0 01:24:24 Check angles 01:24:24 SkyScan query 01:24:24 SkyScan query done: ret=0 az=90.015<-6001 ze=157.305<-1513 Statuses=0009 0009 01:24:24 Msec=0 True Az=90.015 Ze=157.305 Az status=0009 Ze status=0009 01:24:24 Check angles 01:24:24 SkyScan query 01:24:25 SkyScan query done: ret=0 az=72.585<-4839 ze=136.35<-2910 Statuses=0009 0009 01:24:25 Msec=750 True Az=72.585 Ze=136.35 Az status=0009 Ze status=0009 01:24:25 Check angles 01:24:25 SkyScan query 01:24:26 SkyScan query done: ret=0 az=55.2<-3680 ze=115.425<-4305 Statuses=0009 0009 01:24:26 Msec=1500 True Az=55.2 Ze=115.425 Az status=0009 Ze status=0009 01:24:26 Check angles 01:24:26 SkyScan query 01:24:26 SkyScan query done: ret=0 az=41.025<-2735 ze=94.035<-5731 Statuses=0009 0009 01:24:26 Msec=2250 True Az=41.025 Ze=94.035 Az status=0009 Ze status=0009 01:24:27 Check angles 01:24:27 SkyScan query 01:24:27 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 01:24:27 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 01:24:27 Check angles 01:24:27 SkyScan query 01:24:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 01:24:28 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 01:24:28 Check angles 01:24:28 SkyScan query 01:24:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:24:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:24:29 Message to Master queued w/err=0: serial=257780 error=0 01:24:34 Received message from Master: op=Filter serial=257781 01:24:34 Color wheel filter change from 0 to 0 01:24:34 FLIGetFilterPos err=0 currentPosition=0 01:24:34 FLIGetStepsRemaining err=0 RemainingSteps=0 01:24:34 Filter is already there-color wheel unchanged 01:24:34 Received message from Master: op=Shutter serial=257782 01:24:34 Shutter LASER close 01:24:34 Received message from Camera: op=State serial=257784 01:24:34 GetSingleValue result=40 Value=cccccccc 01:24:34 SkyScan query 01:24:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:24:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:35 Parameters OK 01:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:35 Set A/D data flow result=40 01:24:35 Set A/D channel type result=40 01:24:35 Set A/D encoding result=40 01:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:35 Set channel filter=0.000000e+000 result=40 01:24:35 Config A/D Result=40 01:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:35 Get A/D filter: -9.255963e+061 result=40 01:24:35 Get A/D value=-858993460 result=40 01:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:35 Parameters OK 01:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:35 Set A/D data flow result=40 01:24:35 Set A/D channel type result=40 01:24:35 Set A/D encoding result=40 01:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:35 Set channel filter=0.000000e+000 result=40 01:24:35 Config A/D Result=40 01:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:35 Get A/D filter: -9.255963e+061 result=40 01:24:35 Get A/D value=-858993460 result=40 01:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:24:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:24:35 Aux= 01:24:35 Message to Camera, serial 257784 queued 01:25:11 Received message from Master: op=PointingHead serial=257797 01:25:11 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:25:11 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:25:12 Point started: ret=0 01:25:12 point_skyscan result=0 01:25:13 Check angles 01:25:13 SkyScan query 01:25:13 SkyScan query done: ret=0 az=64.08<-4272 ze=66.555<-7563 Statuses=0009 0008 01:25:13 Msec=0 True Az=64.08 Ze=66.555 Az status=0009 Ze status=0008 01:25:13 Check angles 01:25:13 SkyScan query 01:25:14 SkyScan query done: ret=0 az=81.585<-5439 ze=66.495<-7567 Statuses=0009 0008 01:25:14 Msec=750 True Az=81.585 Ze=66.495 Az status=0009 Ze status=0008 01:25:14 Check angles 01:25:14 SkyScan query 01:25:15 SkyScan query done: ret=0 az=99.06<-6604 ze=66.495<-7567 Statuses=0009 0008 01:25:15 Msec=1500 True Az=99.06 Ze=66.495 Az status=0009 Ze status=0008 01:25:15 Check angles 01:25:15 SkyScan query 01:25:15 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 01:25:15 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 01:25:16 Check angles 01:25:16 SkyScan query 01:25:16 SkyScan query done: ret=0 az=134.28<-8952 ze=66.495<-7567 Statuses=0009 0008 01:25:16 Msec=3000 True Az=134.28 Ze=66.495 Az status=0009 Ze status=0008 01:25:16 Check angles 01:25:16 SkyScan query 01:25:17 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 01:25:17 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 01:25:17 Check angles 01:25:17 SkyScan query 01:25:18 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:25:18 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:25:18 Message to Master queued w/err=0: serial=257797 error=0 01:25:23 Received message from Master: op=Filter serial=257798 01:25:23 Color wheel filter change from 0 to 0 01:25:23 FLIGetFilterPos err=0 currentPosition=0 01:25:23 FLIGetStepsRemaining err=0 RemainingSteps=0 01:25:23 Filter is already there-color wheel unchanged 01:25:23 Received message from Master: op=Shutter serial=257799 01:25:23 Shutter LASER close 01:25:23 Received message from Camera: op=State serial=257801 01:25:23 GetSingleValue result=40 Value=cccccccc 01:25:23 SkyScan query 01:25:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:25:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:24 Parameters OK 01:25:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:24 Set A/D data flow result=40 01:25:24 Set A/D channel type result=40 01:25:24 Set A/D encoding result=40 01:25:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:24 Set channel filter=0.000000e+000 result=40 01:25:24 Config A/D Result=40 01:25:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:24 Get A/D filter: -9.255963e+061 result=40 01:25:24 Get A/D value=-858993460 result=40 01:25:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:24 Parameters OK 01:25:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:24 Set A/D data flow result=40 01:25:24 Set A/D channel type result=40 01:25:24 Set A/D encoding result=40 01:25:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:24 Set channel filter=0.000000e+000 result=40 01:25:24 Config A/D Result=40 01:25:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:24 Get A/D filter: -9.255963e+061 result=40 01:25:24 Get A/D value=-858993460 result=40 01:25:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:24 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:25:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:25:24 Aux= 01:25:24 Message to Camera, serial 257801 queued 01:26:00 Received message from Master: op=PointingHead serial=257814 01:26:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:26:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 [UTC 2018-12-19 01:26:01] 01:26:01 Point started: ret=0 01:26:01 point_skyscan result=0 01:26:01 Check angles 01:26:01 SkyScan query 01:26:02 SkyScan query done: ret=0 az=133.71<-8914 ze=35.085<-9661 Statuses=0009 0009 01:26:02 Msec=0 True Az=133.71 Ze=35.085 Az status=0009 Ze status=0009 01:26:02 Check angles 01:26:02 SkyScan query 01:26:03 SkyScan query done: ret=0 az=116.22<-7748 ze=14.115<-11059 Statuses=0009 0009 01:26:03 Msec=750 True Az=116.22 Ze=14.115 Az status=0009 Ze status=0009 01:26:03 Check angles 01:26:03 SkyScan query 01:26:04 SkyScan query done: ret=0 az=98.325<-6555 ze=-7.215<-12481 Statuses=0009 0009 01:26:04 Msec=1500 True Az=98.325 Ze=-7.215 Az status=0009 Ze status=0009 01:26:04 Check angles 01:26:04 SkyScan query 01:26:04 SkyScan query done: ret=0 az=80.97<-5398 ze=-28.185<-13879 Statuses=0009 0009 01:26:04 Msec=2250 True Az=80.97 Ze=-28.185 Az status=0009 Ze status=0009 01:26:04 Check angles 01:26:04 SkyScan query 01:26:05 SkyScan query done: ret=0 az=63.39<-4226 ze=-38.565<-14571 Statuses=0009 0008 01:26:05 Msec=3000 True Az=63.39 Ze=-38.565 Az status=0009 Ze status=0008 01:26:05 Check angles 01:26:05 SkyScan query 01:26:06 SkyScan query done: ret=0 az=45.69<-3046 ze=-38.52<-14568 Statuses=0009 0008 01:26:06 Msec=3750 True Az=45.69 Ze=-38.52 Az status=0009 Ze status=0008 01:26:06 Check angles 01:26:06 SkyScan query 01:26:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:26:07 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:26:07 Message to Master queued w/err=0: serial=257814 error=0 01:26:12 Received message from Master: op=Filter serial=257815 01:26:12 Color wheel filter change from 0 to 0 01:26:12 FLIGetFilterPos err=0 currentPosition=0 01:26:12 FLIGetStepsRemaining err=0 RemainingSteps=0 01:26:12 Filter is already there-color wheel unchanged 01:26:12 Received message from Master: op=Shutter serial=257816 01:26:12 Shutter LASER close 01:26:12 Received message from Camera: op=State serial=257818 01:26:12 GetSingleValue result=40 Value=cccccccc 01:26:12 SkyScan query 01:26:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:26:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:12 Parameters OK 01:26:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:12 Set A/D data flow result=40 01:26:12 Set A/D channel type result=40 01:26:12 Set A/D encoding result=40 01:26:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:12 Set channel filter=0.000000e+000 result=40 01:26:12 Config A/D Result=40 01:26:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:12 Get A/D filter: -9.255963e+061 result=40 01:26:12 Get A/D value=-858993460 result=40 01:26:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:12 Parameters OK 01:26:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:12 Set A/D data flow result=40 01:26:12 Set A/D channel type result=40 01:26:12 Set A/D encoding result=40 01:26:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:12 Set channel filter=0.000000e+000 result=40 01:26:12 Config A/D Result=40 01:26:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:12 Get A/D filter: -9.255963e+061 result=40 01:26:12 Get A/D value=-858993460 result=40 01:26:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:26:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:26:12 Aux= 01:26:12 Message to Camera, serial 257818 queued 01:26:49 Received message from Master: op=PointingHead serial=257831 01:26:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:26:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:26:50 Point started: ret=0 01:26:50 point_skyscan result=0 01:26:50 Check angles 01:26:50 SkyScan query 01:26:51 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.13<-16542 Statuses=0009 0009 01:26:51 Msec=0 True Az=63.87 Ze=-68.13 Az status=0009 Ze status=0009 01:26:51 Check angles 01:26:51 SkyScan query 01:26:52 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.1<-17940 Statuses=0009 0009 01:26:52 Msec=750 True Az=81.315 Ze=-89.1 Az status=0009 Ze status=0009 01:26:52 Check angles 01:26:52 SkyScan query 01:26:52 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.025<-19335 Statuses=0009 0009 01:26:52 Msec=1500 True Az=98.82 Ze=-110.025 Az status=0009 Ze status=0009 01:26:53 Check angles 01:26:53 SkyScan query 01:26:53 SkyScan query done: ret=0 az=116.13<-7742 ze=-131.025<-20735 Statuses=0009 0009 01:26:53 Msec=2250 True Az=116.13 Ze=-131.025 Az status=0009 Ze status=0009 01:26:53 Check angles 01:26:53 SkyScan query 01:26:54 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 01:26:54 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 01:26:54 Check angles 01:26:54 SkyScan query 01:26:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 01:26:55 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 01:26:55 Message to Master queued w/err=0: serial=257831 error=0 01:27:00 Received message from Master: op=Filter serial=257832 01:27:00 Color wheel filter change from 0 to 0 01:27:00 FLIGetFilterPos err=0 currentPosition=0 01:27:00 FLIGetStepsRemaining err=0 RemainingSteps=0 01:27:00 Filter is already there-color wheel unchanged 01:27:00 Received message from Master: op=Shutter serial=257833 01:27:00 Shutter LASER close 01:27:00 Received message from Camera: op=State serial=257835 01:27:00 GetSingleValue result=40 Value=cccccccc 01:27:00 SkyScan query 01:27:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:27:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:00 Parameters OK 01:27:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:00 Set A/D data flow result=40 01:27:00 Set A/D channel type result=40 01:27:00 Set A/D encoding result=40 01:27:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:00 Set channel filter=0.000000e+000 result=40 01:27:00 Config A/D Result=40 01:27:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:00 Get A/D filter: -9.255963e+061 result=40 01:27:00 Get A/D value=-858993460 result=40 01:27:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:00 Parameters OK 01:27:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:00 Set A/D data flow result=40 01:27:00 Set A/D channel type result=40 01:27:00 Set A/D encoding result=40 01:27:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:00 Set channel filter=0.000000e+000 result=40 01:27:00 Config A/D Result=40 01:27:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:00 Get A/D filter: -9.255963e+061 result=40 01:27:00 Get A/D value=-858993460 result=40 01:27:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:27:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:27:00 Aux= 01:27:00 Message to Camera, serial 257835 queued 01:27:37 Received message from Master: op=PointingHead serial=257848 01:27:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:27:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:27:38 Point started: ret=0 01:27:38 point_skyscan result=0 01:27:38 Check angles 01:27:38 SkyScan query 01:27:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 01:27:39 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 01:27:39 Check angles 01:27:39 SkyScan query 01:27:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:27:40 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:27:40 Message to Master queued w/err=0: serial=257848 error=0 01:27:45 Received message from Master: op=Filter serial=257849 01:27:45 Color wheel filter change from 0 to 0 01:27:45 FLIGetFilterPos err=0 currentPosition=0 01:27:45 FLIGetStepsRemaining err=0 RemainingSteps=0 01:27:45 Filter is already there-color wheel unchanged 01:27:45 Received message from Master: op=Shutter serial=257850 01:27:45 Shutter LASER open 01:27:45 Received message from Camera: op=State serial=257852 01:27:45 GetSingleValue result=40 Value=cccccccc 01:27:45 SkyScan query 01:27:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:27:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:46 Parameters OK 01:27:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:46 Set A/D data flow result=40 01:27:46 Set A/D channel type result=40 01:27:46 Set A/D encoding result=40 01:27:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:46 Set channel filter=0.000000e+000 result=40 01:27:46 Config A/D Result=40 01:27:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:46 Get A/D filter: -9.255963e+061 result=40 01:27:46 Get A/D value=-858993460 result=40 01:27:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:46 Parameters OK 01:27:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:46 Set A/D data flow result=40 01:27:46 Set A/D channel type result=40 01:27:46 Set A/D encoding result=40 01:27:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:46 Set channel filter=0.000000e+000 result=40 01:27:46 Config A/D Result=40 01:27:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:46 Get A/D filter: -9.255963e+061 result=40 01:27:46 Get A/D value=-858993460 result=40 01:27:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:27:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:27:46 Aux= 01:27:46 Message to Camera, serial 257852 queued 01:27:54 Received message from Master: op=Shutter serial=257862 01:27:54 Shutter LASER close 01:27:55 Received message from Master: op=PointingHead serial=257866 01:27:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:27:55 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:27:55 Point started: ret=0 01:27:55 point_skyscan result=0 01:27:56 Check angles 01:27:56 SkyScan query 01:27:56 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.595<-21573 Statuses=0009 0009 01:27:56 Msec=0 True Az=135.705 Ze=-143.595 Az status=0009 Ze status=0009 01:27:57 Check angles 01:27:57 SkyScan query 01:27:57 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.625<-20175 Statuses=0009 0009 01:27:57 Msec=750 True Az=153.225 Ze=-122.625 Az status=0009 Ze status=0009 01:27:57 Check angles 01:27:57 SkyScan query 01:27:58 SkyScan query done: ret=0 az=170.7<-11380 ze=-101.715<-18781 Statuses=0009 0009 01:27:58 Msec=1500 True Az=170.7 Ze=-101.715 Az status=0009 Ze status=0009 01:27:58 Check angles 01:27:58 SkyScan query 01:27:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.67<-17378 Statuses=0008 0009 01:27:59 Msec=2250 True Az=175.995 Ze=-80.67 Az status=0008 Ze status=0009 01:27:59 Check angles 01:27:59 SkyScan query 01:27:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.73<-15982 Statuses=0008 0009 01:27:59 Msec=3000 True Az=175.995 Ze=-59.73 Az status=0008 Ze status=0009 01:28:00 Check angles 01:28:00 SkyScan query 01:28:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:28:00 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:28:00 Message to Master queued w/err=0: serial=257866 error=0 01:28:05 Received message from Master: op=Filter serial=257867 01:28:05 Color wheel filter change from 0 to 0 01:28:05 FLIGetFilterPos err=0 currentPosition=0 01:28:05 FLIGetStepsRemaining err=0 RemainingSteps=0 01:28:05 Filter is already there-color wheel unchanged 01:28:05 Received message from Master: op=Shutter serial=257868 01:28:05 Shutter LASER close 01:28:05 Received message from Camera: op=State serial=257870 01:28:05 GetSingleValue result=40 Value=cccccccc 01:28:05 SkyScan query 01:28:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:28:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:06 Parameters OK 01:28:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:06 Set A/D data flow result=40 01:28:06 Set A/D channel type result=40 01:28:06 Set A/D encoding result=40 01:28:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:06 Set channel filter=0.000000e+000 result=40 01:28:06 Config A/D Result=40 01:28:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:06 Get A/D filter: -9.255963e+061 result=40 01:28:06 Get A/D value=-858993460 result=40 01:28:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:06 Parameters OK 01:28:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:06 Set A/D data flow result=40 01:28:06 Set A/D channel type result=40 01:28:06 Set A/D encoding result=40 01:28:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:06 Set channel filter=0.000000e+000 result=40 01:28:06 Config A/D Result=40 01:28:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:06 Get A/D filter: -9.255963e+061 result=40 01:28:06 Get A/D value=-858993460 result=40 01:28:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:28:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:28:06 Aux= 01:28:06 Message to Camera, serial 257870 queued 01:28:43 Received message from Master: op=PointingHead serial=257883 01:28:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:28:43 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:28:43 Point started: ret=0 01:28:43 point_skyscan result=0 01:28:44 Check angles 01:28:44 SkyScan query 01:28:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.48<-13432 Statuses=0008 0009 01:28:45 Msec=0 True Az=175.995 Ze=-21.48 Az status=0008 Ze status=0009 01:28:45 Check angles 01:28:45 SkyScan query 01:28:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.135<-12009 Statuses=0008 0009 01:28:45 Msec=750 True Az=175.995 Ze=-0.135 Az status=0008 Ze status=0009 01:28:46 Check angles 01:28:46 SkyScan query 01:28:46 SkyScan query done: ret=0 az=175.995<-11733 ze=20.85<-10610 Statuses=0008 0009 01:28:46 Msec=1500 True Az=175.995 Ze=20.85 Az status=0008 Ze status=0009 01:28:46 Check angles 01:28:46 SkyScan query 01:28:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 01:28:47 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 01:28:47 Check angles 01:28:47 SkyScan query 01:28:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 01:28:48 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 01:28:48 Message to Master queued w/err=0: serial=257883 error=0 01:28:53 Received message from Master: op=Filter serial=257884 01:28:53 Color wheel filter change from 0 to 0 01:28:53 FLIGetFilterPos err=0 currentPosition=0 01:28:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:28:53 Filter is already there-color wheel unchanged 01:28:53 Received message from Master: op=Shutter serial=257885 01:28:53 Shutter LASER close 01:28:53 Received message from Camera: op=State serial=257887 01:28:53 GetSingleValue result=40 Value=cccccccc 01:28:53 SkyScan query 01:28:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:28:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:54 Parameters OK 01:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:54 Set A/D data flow result=40 01:28:54 Set A/D channel type result=40 01:28:54 Set A/D encoding result=40 01:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:54 Set channel filter=0.000000e+000 result=40 01:28:54 Config A/D Result=40 01:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:54 Get A/D filter: -9.255963e+061 result=40 01:28:54 Get A/D value=-858993460 result=40 01:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:54 Parameters OK 01:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:54 Set A/D data flow result=40 01:28:54 Set A/D channel type result=40 01:28:54 Set A/D encoding result=40 01:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:54 Set channel filter=0.000000e+000 result=40 01:28:54 Config A/D Result=40 01:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:54 Get A/D filter: -9.255963e+061 result=40 01:28:54 Get A/D value=-858993460 result=40 01:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:28:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:28:54 Aux= 01:28:54 Message to Camera, serial 257887 queued 01:29:29 Received message from Master: op=PointingHead serial=257899 01:29:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:29:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:29:30 Point started: ret=0 01:29:30 point_skyscan result=0 01:29:30 Check angles 01:29:30 SkyScan query 01:29:31 SkyScan query done: ret=0 az=152.685<-10179 ze=8.295<-11447 Statuses=0009 0009 01:29:31 Msec=0 True Az=152.685 Ze=8.295 Az status=0009 Ze status=0009 01:29:31 Check angles 01:29:31 SkyScan query 01:29:32 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.585<-12839 Statuses=0009 0009 01:29:32 Msec=750 True Az=135.12 Ze=-12.585 Az status=0009 Ze status=0009 01:29:32 Check angles 01:29:32 SkyScan query 01:29:33 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.6<-14240 Statuses=0009 0009 01:29:33 Msec=1500 True Az=117.615 Ze=-33.6 Az status=0009 Ze status=0009 01:29:33 Check angles 01:29:33 SkyScan query 01:29:33 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.555<-15437 Statuses=0009 0009 01:29:33 Msec=2250 True Az=100.26 Ze=-51.555 Az status=0009 Ze status=0009 01:29:34 Check angles 01:29:34 SkyScan query 01:29:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:29:34 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:29:34 Check angles 01:29:34 SkyScan query 01:29:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:29:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:29:35 Message to Master queued w/err=0: serial=257899 error=0 01:29:40 Received message from Master: op=Filter serial=257900 01:29:40 Color wheel filter change from 0 to 0 01:29:40 FLIGetFilterPos err=0 currentPosition=0 01:29:40 FLIGetStepsRemaining err=0 RemainingSteps=0 01:29:40 Filter is already there-color wheel unchanged 01:29:40 Received message from Master: op=Shutter serial=257901 01:29:40 Shutter LASER close 01:29:40 Received message from Camera: op=State serial=257903 01:29:40 GetSingleValue result=40 Value=cccccccc 01:29:40 SkyScan query 01:29:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:29:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:41 Parameters OK 01:29:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:41 Set A/D data flow result=40 01:29:41 Set A/D channel type result=40 01:29:41 Set A/D encoding result=40 01:29:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:41 Set channel filter=0.000000e+000 result=40 01:29:41 Config A/D Result=40 01:29:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:41 Get A/D filter: -9.255963e+061 result=40 01:29:41 Get A/D value=-858993460 result=40 01:29:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:41 Parameters OK 01:29:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:41 Set A/D data flow result=40 01:29:41 Set A/D channel type result=40 01:29:41 Set A/D encoding result=40 01:29:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:41 Set channel filter=0.000000e+000 result=40 01:29:41 Config A/D Result=40 01:29:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:41 Get A/D filter: -9.255963e+061 result=40 01:29:41 Get A/D value=-858993460 result=40 01:29:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:29:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:29:41 Aux= 01:29:41 Message to Camera, serial 257903 queued 01:30:17 Received message from Master: op=PointingHead serial=257916 01:30:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:30:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:30:18 Point started: ret=0 01:30:18 point_skyscan result=0 01:30:19 Check angles 01:30:19 SkyScan query 01:30:19 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.75<-17450 Statuses=0009 0009 01:30:19 Msec=0 True Az=109.38 Ze=-81.75 Az status=0009 Ze status=0009 01:30:19 Check angles 01:30:19 SkyScan query 01:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 01:30:20 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 01:30:20 Check angles 01:30:20 SkyScan query 01:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 01:30:21 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 01:30:21 Check angles 01:30:21 SkyScan query 01:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 01:30:21 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 01:30:22 Check angles 01:30:22 SkyScan query 01:30:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.51<-23034 Statuses=0008 0009 01:30:22 Msec=3000 True Az=112.995 Ze=-165.51 Az status=0008 Ze status=0009 01:30:22 Check angles 01:30:22 SkyScan query 01:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:30:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:30:23 Message to Master queued w/err=0: serial=257916 error=0 01:30:28 Received message from Master: op=Filter serial=257917 01:30:28 Color wheel filter change from 0 to 0 01:30:28 FLIGetFilterPos err=0 currentPosition=0 01:30:28 FLIGetStepsRemaining err=0 RemainingSteps=0 01:30:28 Filter is already there-color wheel unchanged 01:30:28 Received message from Master: op=Shutter serial=257918 01:30:28 Shutter LASER open 01:30:28 Received message from Camera: op=State serial=257920 01:30:28 GetSingleValue result=40 Value=cccccccc 01:30:28 SkyScan query 01:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:30:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:29 Parameters OK 01:30:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:29 Set A/D data flow result=40 01:30:29 Set A/D channel type result=40 01:30:29 Set A/D encoding result=40 01:30:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:29 Set channel filter=0.000000e+000 result=40 01:30:29 Config A/D Result=40 01:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:29 Get A/D filter: -9.255963e+061 result=40 01:30:29 Get A/D value=-858993460 result=40 01:30:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:29 Parameters OK 01:30:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:29 Set A/D data flow result=40 01:30:29 Set A/D channel type result=40 01:30:29 Set A/D encoding result=40 01:30:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:29 Set channel filter=0.000000e+000 result=40 01:30:29 Config A/D Result=40 01:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:29 Get A/D filter: -9.255963e+061 result=40 01:30:29 Get A/D value=-858993460 result=40 01:30:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:30:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:30:29 Aux= 01:30:29 Message to Camera, serial 257920 queued 01:30:37 Received message from Master: op=Shutter serial=257930 01:30:37 Shutter LASER close 01:30:38 Received message from Master: op=PointingHead serial=257934 01:30:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:30:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:30:38 Point started: ret=0 01:30:38 point_skyscan result=0 01:30:39 Check angles 01:30:39 SkyScan query 01:30:39 SkyScan query done: ret=0 az=90.09<-6006 ze=157.41<-1506 Statuses=0009 0009 01:30:39 Msec=0 True Az=90.09 Ze=157.41 Az status=0009 Ze status=0009 01:30:40 Check angles 01:30:40 SkyScan query 01:30:40 SkyScan query done: ret=0 az=72.615<-4841 ze=136.455<-2903 Statuses=0009 0009 01:30:40 Msec=750 True Az=72.615 Ze=136.455 Az status=0009 Ze status=0009 01:30:40 Check angles 01:30:40 SkyScan query 01:30:41 SkyScan query done: ret=0 az=54.81<-3654 ze=115.08<-4328 Statuses=0009 0009 01:30:41 Msec=1500 True Az=54.81 Ze=115.08 Az status=0009 Ze status=0009 01:30:41 Check angles 01:30:41 SkyScan query 01:30:42 SkyScan query done: ret=0 az=41.01<-2734 ze=93.675<-5755 Statuses=0009 0009 01:30:42 Msec=2250 True Az=41.01 Ze=93.675 Az status=0009 Ze status=0009 01:30:42 Check angles 01:30:42 SkyScan query 01:30:42 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 01:30:42 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 01:30:43 Check angles 01:30:43 SkyScan query 01:30:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 01:30:43 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 01:30:43 Check angles 01:30:43 SkyScan query 01:30:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:30:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:30:44 Message to Master queued w/err=0: serial=257934 error=0 01:30:49 Received message from Master: op=Filter serial=257935 01:30:49 Color wheel filter change from 0 to 0 01:30:49 FLIGetFilterPos err=0 currentPosition=0 01:30:49 FLIGetStepsRemaining err=0 RemainingSteps=0 01:30:49 Filter is already there-color wheel unchanged 01:30:49 Received message from Master: op=Shutter serial=257936 01:30:49 Shutter LASER close 01:30:49 Received message from Camera: op=State serial=257938 01:30:49 GetSingleValue result=40 Value=cccccccc 01:30:49 SkyScan query 01:30:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:30:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:50 Parameters OK 01:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:50 Set A/D data flow result=40 01:30:50 Set A/D channel type result=40 01:30:50 Set A/D encoding result=40 01:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:50 Set channel filter=0.000000e+000 result=40 01:30:50 Config A/D Result=40 01:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:50 Get A/D filter: -9.255963e+061 result=40 01:30:50 Get A/D value=-858993460 result=40 01:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:50 Parameters OK 01:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:50 Set A/D data flow result=40 01:30:50 Set A/D channel type result=40 01:30:50 Set A/D encoding result=40 01:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:50 Set channel filter=0.000000e+000 result=40 01:30:50 Config A/D Result=40 01:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:50 Get A/D filter: -9.255963e+061 result=40 01:30:50 Get A/D value=-858993460 result=40 01:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:30:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:30:50 Aux= 01:30:50 Message to Camera, serial 257938 queued 01:31:27 Received message from Master: op=PointingHead serial=257951 01:31:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:31:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:31:27 Point started: ret=0 01:31:27 point_skyscan result=0 01:31:28 Check angles 01:31:28 SkyScan query 01:31:28 SkyScan query done: ret=0 az=64.29<-4286 ze=66.555<-7563 Statuses=0009 0008 01:31:28 Msec=0 True Az=64.29 Ze=66.555 Az status=0009 Ze status=0008 01:31:29 Check angles 01:31:29 SkyScan query 01:31:29 SkyScan query done: ret=0 az=82.125<-5475 ze=66.495<-7567 Statuses=0009 0008 01:31:29 Msec=750 True Az=82.125 Ze=66.495 Az status=0009 Ze status=0008 01:31:29 Check angles 01:31:29 SkyScan query 01:31:30 SkyScan query done: ret=0 az=99.66<-6644 ze=66.495<-7567 Statuses=0009 0008 01:31:30 Msec=1500 True Az=99.66 Ze=66.495 Az status=0009 Ze status=0008 01:31:30 Check angles 01:31:30 SkyScan query 01:31:31 SkyScan query done: ret=0 az=117.045<-7803 ze=66.495<-7567 Statuses=0009 0008 01:31:31 Msec=2250 True Az=117.045 Ze=66.495 Az status=0009 Ze status=0008 01:31:31 Check angles 01:31:31 SkyScan query 01:31:31 SkyScan query done: ret=0 az=134.865<-8991 ze=66.495<-7567 Statuses=0009 0008 01:31:31 Msec=3000 True Az=134.865 Ze=66.495 Az status=0009 Ze status=0008 01:31:32 Check angles 01:31:32 SkyScan query 01:31:32 SkyScan query done: ret=0 az=152.295<-10153 ze=66.495<-7567 Statuses=0009 0008 01:31:32 Msec=3750 True Az=152.295 Ze=66.495 Az status=0009 Ze status=0008 01:31:32 Check angles 01:31:32 SkyScan query 01:31:33 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:31:33 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:31:33 Message to Master queued w/err=0: serial=257951 error=0 01:31:38 Received message from Master: op=Filter serial=257952 01:31:38 Color wheel filter change from 0 to 0 01:31:38 FLIGetFilterPos err=0 currentPosition=0 01:31:38 FLIGetStepsRemaining err=0 RemainingSteps=0 01:31:38 Filter is already there-color wheel unchanged 01:31:38 Received message from Master: op=Shutter serial=257953 01:31:38 Shutter LASER close 01:31:38 Received message from Camera: op=State serial=257955 01:31:38 GetSingleValue result=40 Value=cccccccc 01:31:38 SkyScan query 01:31:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:31:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:31:39 Parameters OK 01:31:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:31:39 Set A/D data flow result=40 01:31:39 Set A/D channel type result=40 01:31:39 Set A/D encoding result=40 01:31:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:31:39 Set channel filter=0.000000e+000 result=40 01:31:39 Config A/D Result=40 01:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:31:39 Get A/D filter: -9.255963e+061 result=40 01:31:39 Get A/D value=-858993460 result=40 01:31:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:31:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:31:39 Parameters OK 01:31:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:31:39 Set A/D data flow result=40 01:31:39 Set A/D channel type result=40 01:31:39 Set A/D encoding result=40 01:31:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:31:39 Set channel filter=0.000000e+000 result=40 01:31:39 Config A/D Result=40 01:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:31:39 Get A/D filter: -9.255963e+061 result=40 01:31:39 Get A/D value=-858993460 result=40 01:31:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:31:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:31:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:31:39 Aux= 01:31:39 Message to Camera, serial 257955 queued 01:32:16 Received message from Master: op=PointingHead serial=257968 01:32:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:32:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:32:16 Point started: ret=0 01:32:16 point_skyscan result=0 01:32:17 Check angles 01:32:17 SkyScan query 01:32:17 SkyScan query done: ret=0 az=134.58<-8972 ze=36.48<-9568 Statuses=0009 0009 01:32:17 Msec=0 True Az=134.58 Ze=36.48 Az status=0009 Ze status=0009 01:32:17 Check angles 01:32:17 SkyScan query 01:32:18 SkyScan query done: ret=0 az=117.105<-7807 ze=15.54<-10964 Statuses=0009 0009 01:32:18 Msec=750 True Az=117.105 Ze=15.54 Az status=0009 Ze status=0009 01:32:18 Check angles 01:32:18 SkyScan query 01:32:19 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.445<-12363 Statuses=0009 0009 01:32:19 Msec=1500 True Az=99.81 Ze=-5.445 Az status=0009 Ze status=0009 01:32:19 Check angles 01:32:19 SkyScan query 01:32:19 SkyScan query done: ret=0 az=82.305<-5487 ze=-26.4<-13760 Statuses=0009 0009 01:32:19 Msec=2250 True Az=82.305 Ze=-26.4 Az status=0009 Ze status=0009 01:32:20 Check angles 01:32:20 SkyScan query 01:32:20 SkyScan query done: ret=0 az=64.71<-4314 ze=-38.58<-14572 Statuses=0009 0008 01:32:20 Msec=3000 True Az=64.71 Ze=-38.58 Az status=0009 Ze status=0008 01:32:20 Check angles 01:32:20 SkyScan query 01:32:21 SkyScan query done: ret=0 az=47.265<-3151 ze=-38.52<-14568 Statuses=0009 0008 01:32:21 Msec=3750 True Az=47.265 Ze=-38.52 Az status=0009 Ze status=0008 01:32:21 Check angles 01:32:21 SkyScan query 01:32:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:32:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:32:22 Message to Master queued w/err=0: serial=257968 error=0 01:32:27 Received message from Master: op=Filter serial=257969 01:32:27 Color wheel filter change from 0 to 0 01:32:27 FLIGetFilterPos err=0 currentPosition=0 01:32:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:32:27 Filter is already there-color wheel unchanged 01:32:27 Received message from Master: op=Shutter serial=257970 01:32:27 Shutter LASER close 01:32:27 Received message from Camera: op=State serial=257972 01:32:27 GetSingleValue result=40 Value=cccccccc 01:32:27 SkyScan query 01:32:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:32:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:28 Parameters OK 01:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:28 Set A/D data flow result=40 01:32:28 Set A/D channel type result=40 01:32:28 Set A/D encoding result=40 01:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:28 Set channel filter=0.000000e+000 result=40 01:32:28 Config A/D Result=40 01:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:28 Get A/D filter: -9.255963e+061 result=40 01:32:28 Get A/D value=-858993460 result=40 01:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:28 Parameters OK 01:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:28 Set A/D data flow result=40 01:32:28 Set A/D channel type result=40 01:32:28 Set A/D encoding result=40 01:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:28 Set channel filter=0.000000e+000 result=40 01:32:28 Config A/D Result=40 01:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:28 Get A/D filter: -9.255963e+061 result=40 01:32:28 Get A/D value=-858993460 result=40 01:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:32:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:32:28 Aux= 01:32:28 Message to Camera, serial 257972 queued 01:33:03 Received message from Master: op=PointingHead serial=257984 01:33:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:33:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:33:04 Point started: ret=0 01:33:04 point_skyscan result=0 01:33:05 Check angles 01:33:05 SkyScan query 01:33:05 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.655<-16577 Statuses=0009 0009 01:33:05 Msec=0 True Az=64.245 Ze=-68.655 Az status=0009 Ze status=0009 01:33:05 Check angles 01:33:05 SkyScan query 01:33:06 SkyScan query done: ret=0 az=81.69<-5446 ze=-89.625<-17975 Statuses=0009 0009 01:33:06 Msec=750 True Az=81.69 Ze=-89.625 Az status=0009 Ze status=0009 01:33:06 Check angles 01:33:06 SkyScan query 01:33:07 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.58<-19372 Statuses=0009 0009 01:33:07 Msec=1500 True Az=99.225 Ze=-110.58 Az status=0009 Ze status=0009 01:33:07 Check angles 01:33:07 SkyScan query 01:33:07 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.505<-20767 Statuses=0009 0009 01:33:07 Msec=2250 True Az=116.745 Ze=-131.505 Az status=0009 Ze status=0009 01:33:08 Check angles 01:33:08 SkyScan query 01:33:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 01:33:08 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 01:33:08 Check angles 01:33:08 SkyScan query 01:33:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 01:33:09 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 01:33:09 Message to Master queued w/err=0: serial=257984 error=0 01:33:14 Received message from Master: op=Filter serial=257985 01:33:14 Color wheel filter change from 0 to 0 01:33:14 FLIGetFilterPos err=0 currentPosition=0 01:33:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:33:14 Filter is already there-color wheel unchanged 01:33:14 Received message from Master: op=Shutter serial=257986 01:33:14 Shutter LASER close 01:33:14 Received message from Camera: op=State serial=257988 01:33:14 GetSingleValue result=40 Value=cccccccc 01:33:14 SkyScan query 01:33:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:33:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:15 Parameters OK 01:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:15 Set A/D data flow result=40 01:33:15 Set A/D channel type result=40 01:33:15 Set A/D encoding result=40 01:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:15 Set channel filter=0.000000e+000 result=40 01:33:15 Config A/D Result=40 01:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:15 Get A/D filter: -9.255963e+061 result=40 01:33:15 Get A/D value=-858993460 result=40 01:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:15 Parameters OK 01:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:15 Set A/D data flow result=40 01:33:15 Set A/D channel type result=40 01:33:15 Set A/D encoding result=40 01:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:15 Set channel filter=0.000000e+000 result=40 01:33:15 Config A/D Result=40 01:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:15 Get A/D filter: -9.255963e+061 result=40 01:33:15 Get A/D value=-858993460 result=40 01:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:33:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:33:15 Aux= 01:33:15 Message to Camera, serial 257988 queued 01:33:51 Received message from Master: op=PointingHead serial=258001 01:33:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:33:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:33:52 Point started: ret=0 01:33:52 point_skyscan result=0 01:33:53 Check angles 01:33:53 SkyScan query 01:33:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.375<-23425 Statuses=0009 0009 01:33:53 Msec=0 True Az=113.01 Ze=-171.375 Az status=0009 Ze status=0009 01:33:53 Check angles 01:33:53 SkyScan query 01:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:33:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:33:54 Message to Master queued w/err=0: serial=258001 error=0 01:33:59 Received message from Master: op=Filter serial=258002 01:33:59 Color wheel filter change from 0 to 0 01:33:59 FLIGetFilterPos err=0 currentPosition=0 01:33:59 FLIGetStepsRemaining err=0 RemainingSteps=0 01:33:59 Filter is already there-color wheel unchanged 01:33:59 Received message from Master: op=Shutter serial=258003 01:33:59 Shutter LASER open 01:33:59 Received message from Camera: op=State serial=258005 01:33:59 GetSingleValue result=40 Value=cccccccc 01:33:59 SkyScan query 01:34:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:34:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:00 Parameters OK 01:34:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:00 Set A/D data flow result=40 01:34:00 Set A/D channel type result=40 01:34:00 Set A/D encoding result=40 01:34:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:00 Set channel filter=0.000000e+000 result=40 01:34:00 Config A/D Result=40 01:34:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:00 Get A/D filter: -9.255963e+061 result=40 01:34:00 Get A/D value=-858993460 result=40 01:34:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:00 Parameters OK 01:34:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:00 Set A/D data flow result=40 01:34:00 Set A/D channel type result=40 01:34:00 Set A/D encoding result=40 01:34:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:00 Set channel filter=0.000000e+000 result=40 01:34:00 Config A/D Result=40 01:34:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:00 Get A/D filter: -9.255963e+061 result=40 01:34:00 Get A/D value=-858993460 result=40 01:34:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:34:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:34:00 Aux= 01:34:00 Message to Camera, serial 258005 queued 01:34:08 Received message from Master: op=Shutter serial=258015 01:34:08 Shutter LASER close 01:34:09 Received message from Master: op=PointingHead serial=258019 01:34:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:34:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:34:09 Point started: ret=0 01:34:09 point_skyscan result=0 01:34:10 Check angles 01:34:10 SkyScan query 01:34:11 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.415<-21561 Statuses=0009 0009 01:34:11 Msec=0 True Az=135.9 Ze=-143.415 Az status=0009 Ze status=0009 01:34:11 Check angles 01:34:11 SkyScan query 01:34:11 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.43<-20162 Statuses=0009 0009 01:34:11 Msec=750 True Az=153.3 Ze=-122.43 Az status=0009 Ze status=0009 01:34:11 Check angles 01:34:11 SkyScan query 01:34:12 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.55<-18770 Statuses=0009 0009 01:34:12 Msec=1500 True Az=170.775 Ze=-101.55 Az status=0009 Ze status=0009 01:34:12 Check angles 01:34:12 SkyScan query 01:34:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.145<-17343 Statuses=0008 0009 01:34:13 Msec=2250 True Az=176.01 Ze=-80.145 Az status=0008 Ze status=0009 01:34:13 Check angles 01:34:13 SkyScan query 01:34:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 01:34:14 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 01:34:14 Check angles 01:34:14 SkyScan query 01:34:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:34:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:34:14 Message to Master queued w/err=0: serial=258019 error=0 01:34:19 Received message from Master: op=Filter serial=258020 01:34:19 Color wheel filter change from 0 to 0 01:34:19 FLIGetFilterPos err=0 currentPosition=0 01:34:19 FLIGetStepsRemaining err=0 RemainingSteps=0 01:34:19 Filter is already there-color wheel unchanged 01:34:19 Received message from Master: op=Shutter serial=258021 01:34:19 Shutter LASER close 01:34:20 Received message from Camera: op=State serial=258023 01:34:20 GetSingleValue result=40 Value=cccccccc 01:34:20 SkyScan query 01:34:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:34:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:20 Parameters OK 01:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:20 Set A/D data flow result=40 01:34:20 Set A/D channel type result=40 01:34:20 Set A/D encoding result=40 01:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:20 Set channel filter=0.000000e+000 result=40 01:34:20 Config A/D Result=40 01:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:20 Get A/D filter: -9.255963e+061 result=40 01:34:20 Get A/D value=-858993460 result=40 01:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:20 Parameters OK 01:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:20 Set A/D data flow result=40 01:34:20 Set A/D channel type result=40 01:34:20 Set A/D encoding result=40 01:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:20 Set channel filter=0.000000e+000 result=40 01:34:20 Config A/D Result=40 01:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:20 Get A/D filter: -9.255963e+061 result=40 01:34:20 Get A/D value=-858993460 result=40 01:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:34:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:34:20 Aux= 01:34:20 Message to Camera, serial 258023 queued 01:34:57 Received message from Master: op=PointingHead serial=258036 01:34:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:34:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:34:58 Point started: ret=0 01:34:58 point_skyscan result=0 01:34:58 Check angles 01:34:58 SkyScan query 01:34:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.615<-13441 Statuses=0008 0009 01:34:59 Msec=0 True Az=175.995 Ze=-21.615 Az status=0008 Ze status=0009 01:34:59 Check angles 01:34:59 SkyScan query 01:35:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.63<-12042 Statuses=0008 0009 01:35:00 Msec=750 True Az=175.995 Ze=-0.63 Az status=0008 Ze status=0009 01:35:00 Check angles 01:35:00 SkyScan query 01:35:00 SkyScan query done: ret=0 az=175.995<-11733 ze=20.31<-10646 Statuses=0008 0009 01:35:00 Msec=1500 True Az=175.995 Ze=20.31 Az status=0008 Ze status=0009 01:35:01 Check angles 01:35:01 SkyScan query 01:35:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.565<-9429 Statuses=0008 0009 01:35:01 Msec=2250 True Az=175.995 Ze=38.565 Az status=0008 Ze status=0009 01:35:01 Check angles 01:35:01 SkyScan query 01:35:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 01:35:02 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 01:35:02 Message to Master queued w/err=0: serial=258036 error=0 01:35:07 Received message from Master: op=Filter serial=258037 01:35:07 Color wheel filter change from 0 to 0 01:35:07 FLIGetFilterPos err=0 currentPosition=0 01:35:07 FLIGetStepsRemaining err=0 RemainingSteps=0 01:35:07 Filter is already there-color wheel unchanged 01:35:07 Received message from Master: op=Shutter serial=258038 01:35:07 Shutter LASER close 01:35:07 Received message from Camera: op=State serial=258040 01:35:07 GetSingleValue result=40 Value=cccccccc 01:35:07 SkyScan query 01:35:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:35:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:08 Parameters OK 01:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:08 Set A/D data flow result=40 01:35:08 Set A/D channel type result=40 01:35:08 Set A/D encoding result=40 01:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:08 Set channel filter=0.000000e+000 result=40 01:35:08 Config A/D Result=40 01:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:08 Get A/D filter: -9.255963e+061 result=40 01:35:08 Get A/D value=-858993460 result=40 01:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:08 Parameters OK 01:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:08 Set A/D data flow result=40 01:35:08 Set A/D channel type result=40 01:35:08 Set A/D encoding result=40 01:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:08 Set channel filter=0.000000e+000 result=40 01:35:08 Config A/D Result=40 01:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:08 Get A/D filter: -9.255963e+061 result=40 01:35:08 Get A/D value=-858993460 result=40 01:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:35:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:35:08 Aux= 01:35:08 Message to Camera, serial 258040 queued 01:35:44 Received message from Master: op=PointingHead serial=258053 01:35:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:35:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:35:45 Point started: ret=0 01:35:45 point_skyscan result=0 01:35:46 Check angles 01:35:46 SkyScan query 01:35:46 SkyScan query done: ret=0 az=153.09<-10206 ze=8.73<-11418 Statuses=0009 0009 01:35:46 Msec=0 True Az=153.09 Ze=8.73 Az status=0009 Ze status=0009 01:35:46 Check angles 01:35:46 SkyScan query 01:35:47 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.195<-12813 Statuses=0009 0009 01:35:47 Msec=750 True Az=135.66 Ze=-12.195 Az status=0009 Ze status=0009 01:35:47 Check angles 01:35:47 SkyScan query 01:35:48 SkyScan query done: ret=0 az=118.11<-7874 ze=-33.15<-14210 Statuses=0009 0009 01:35:48 Msec=1500 True Az=118.11 Ze=-33.15 Az status=0009 Ze status=0009 01:35:48 Check angles 01:35:48 SkyScan query 01:35:48 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 01:35:48 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 01:35:49 Check angles 01:35:49 SkyScan query 01:35:49 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 01:35:49 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 01:35:49 Check angles [UTC 2018-12-19 01:35:49] 01:35:49 SkyScan query 01:35:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:35:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:35:50 Message to Master queued w/err=0: serial=258053 error=0 [UTC 2018-12-19 01:35:52] 01:35:55 Received message from Master: op=Filter serial=258054 01:35:55 Color wheel filter change from 0 to 0 01:35:55 FLIGetFilterPos err=0 currentPosition=0 01:35:55 FLIGetStepsRemaining err=0 RemainingSteps=0 01:35:55 Filter is already there-color wheel unchanged 01:35:55 Received message from Master: op=Shutter serial=258055 01:35:55 Shutter LASER close 01:35:55 Received message from Camera: op=State serial=258057 01:35:55 GetSingleValue result=40 Value=cccccccc 01:35:55 SkyScan query 01:35:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:35:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:56 Parameters OK 01:35:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:56 Set A/D data flow result=40 01:35:56 Set A/D channel type result=40 01:35:56 Set A/D encoding result=40 01:35:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:56 Set channel filter=0.000000e+000 result=40 01:35:56 Config A/D Result=40 01:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:56 Get A/D filter: -9.255963e+061 result=40 01:35:56 Get A/D value=-858993460 result=40 01:35:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:56 Parameters OK 01:35:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:56 Set A/D data flow result=40 01:35:56 Set A/D channel type result=40 01:35:56 Set A/D encoding result=40 01:35:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:56 Set channel filter=0.000000e+000 result=40 01:35:56 Config A/D Result=40 01:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:56 Get A/D filter: -9.255963e+061 result=40 01:35:56 Get A/D value=-858993460 result=40 01:35:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:35:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:35:56 Aux= 01:35:56 Message to Camera, serial 258057 queued 01:36:33 Received message from Master: op=PointingHead serial=258070 01:36:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:36:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:36:33 Point started: ret=0 01:36:33 point_skyscan result=0 01:36:34 Check angles 01:36:34 SkyScan query 01:36:34 SkyScan query done: ret=0 az=108.96<-7264 ze=-80.985<-17399 Statuses=0009 0009 01:36:34 Msec=0 True Az=108.96 Ze=-80.985 Az status=0009 Ze status=0009 01:36:34 Check angles 01:36:34 SkyScan query 01:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.94<-18796 Statuses=0008 0009 01:36:35 Msec=750 True Az=112.995 Ze=-101.94 Az status=0008 Ze status=0009 01:36:35 Check angles 01:36:35 SkyScan query 01:36:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 01:36:36 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 01:36:36 Check angles 01:36:36 SkyScan query 01:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.865<-21591 Statuses=0008 0009 01:36:37 Msec=2250 True Az=112.995 Ze=-143.865 Az status=0008 Ze status=0009 01:36:37 Check angles 01:36:37 SkyScan query 01:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.24<-23016 Statuses=0008 0009 01:36:37 Msec=3000 True Az=112.995 Ze=-165.24 Az status=0008 Ze status=0009 01:36:37 Check angles 01:36:37 SkyScan query 01:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:36:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:36:38 Message to Master queued w/err=0: serial=258070 error=0 01:36:43 Received message from Master: op=Filter serial=258071 01:36:43 Color wheel filter change from 0 to 0 01:36:43 FLIGetFilterPos err=0 currentPosition=0 01:36:43 FLIGetStepsRemaining err=0 RemainingSteps=0 01:36:43 Filter is already there-color wheel unchanged 01:36:43 Received message from Master: op=Shutter serial=258072 01:36:43 Shutter LASER open 01:36:43 Received message from Camera: op=State serial=258074 01:36:43 GetSingleValue result=40 Value=cccccccc 01:36:43 SkyScan query 01:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:36:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:44 Parameters OK 01:36:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:44 Set A/D data flow result=40 01:36:44 Set A/D channel type result=40 01:36:44 Set A/D encoding result=40 01:36:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:44 Set channel filter=0.000000e+000 result=40 01:36:44 Config A/D Result=40 01:36:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:44 Get A/D filter: -9.255963e+061 result=40 01:36:44 Get A/D value=-858993460 result=40 01:36:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:44 Parameters OK 01:36:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:44 Set A/D data flow result=40 01:36:44 Set A/D channel type result=40 01:36:44 Set A/D encoding result=40 01:36:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:44 Set channel filter=0.000000e+000 result=40 01:36:44 Config A/D Result=40 01:36:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:44 Get A/D filter: -9.255963e+061 result=40 01:36:44 Get A/D value=-858993460 result=40 01:36:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:36:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:36:44 Aux= 01:36:44 Message to Camera, serial 258074 queued 01:36:52 Received message from Master: op=Shutter serial=258084 01:36:52 Shutter LASER close 01:36:53 Received message from Master: op=PointingHead serial=258088 01:36:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:36:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:36:53 Point started: ret=0 01:36:53 point_skyscan result=0 01:36:54 Check angles 01:36:54 SkyScan query 01:36:55 SkyScan query done: ret=0 az=89.865<-5991 ze=157.155<-1523 Statuses=0009 0009 01:36:55 Msec=0 True Az=89.865 Ze=157.155 Az status=0009 Ze status=0009 01:36:55 Check angles 01:36:55 SkyScan query 01:36:55 SkyScan query done: ret=0 az=72<-4800 ze=135.78<-2948 Statuses=0009 0009 01:36:55 Msec=750 True Az=72 Ze=135.78 Az status=0009 Ze status=0009 01:36:56 Check angles 01:36:56 SkyScan query 01:36:56 SkyScan query done: ret=0 az=54.555<-3637 ze=114.78<-4348 Statuses=0009 0009 01:36:56 Msec=1500 True Az=54.555 Ze=114.78 Az status=0009 Ze status=0009 01:36:56 Check angles 01:36:56 SkyScan query 01:36:57 SkyScan query done: ret=0 az=41.01<-2734 ze=93.855<-5743 Statuses=0009 0009 01:36:57 Msec=2250 True Az=41.01 Ze=93.855 Az status=0009 Ze status=0009 01:36:57 Check angles 01:36:57 SkyScan query 01:36:58 SkyScan query done: ret=0 az=40.995<-2733 ze=72.45<-7170 Statuses=0008 0009 01:36:58 Msec=3000 True Az=40.995 Ze=72.45 Az status=0008 Ze status=0009 01:36:58 Check angles 01:36:58 SkyScan query 01:36:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.065<-8529 Statuses=0008 0009 01:36:58 Msec=3750 True Az=40.995 Ze=52.065 Az status=0008 Ze status=0009 01:36:59 Check angles 01:36:59 SkyScan query 01:36:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:36:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:36:59 Message to Master queued w/err=0: serial=258088 error=0 01:37:04 Received message from Master: op=Filter serial=258089 01:37:04 Color wheel filter change from 0 to 0 01:37:04 FLIGetFilterPos err=0 currentPosition=0 01:37:04 FLIGetStepsRemaining err=0 RemainingSteps=0 01:37:04 Filter is already there-color wheel unchanged 01:37:04 Received message from Master: op=Shutter serial=258090 01:37:04 Shutter LASER close 01:37:05 Received message from Camera: op=State serial=258092 01:37:05 GetSingleValue result=40 Value=cccccccc 01:37:05 SkyScan query 01:37:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:37:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:05 Parameters OK 01:37:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:05 Set A/D data flow result=40 01:37:05 Set A/D channel type result=40 01:37:05 Set A/D encoding result=40 01:37:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:05 Set channel filter=0.000000e+000 result=40 01:37:05 Config A/D Result=40 01:37:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:05 Get A/D filter: -9.255963e+061 result=40 01:37:05 Get A/D value=-858993460 result=40 01:37:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:05 Parameters OK 01:37:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:05 Set A/D data flow result=40 01:37:05 Set A/D channel type result=40 01:37:05 Set A/D encoding result=40 01:37:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:05 Set channel filter=0.000000e+000 result=40 01:37:05 Config A/D Result=40 01:37:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:05 Get A/D filter: -9.255963e+061 result=40 01:37:05 Get A/D value=-858993460 result=40 01:37:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:37:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:37:05 Aux= 01:37:05 Message to Camera, serial 258092 queued 01:37:42 Received message from Master: op=PointingHead serial=258105 01:37:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:37:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:37:42 Point started: ret=0 01:37:42 point_skyscan result=0 01:37:43 Check angles 01:37:43 SkyScan query 01:37:44 SkyScan query done: ret=0 az=64.125<-4275 ze=66.555<-7563 Statuses=0009 0008 01:37:44 Msec=0 True Az=64.125 Ze=66.555 Az status=0009 Ze status=0008 01:37:44 Check angles 01:37:44 SkyScan query 01:37:44 SkyScan query done: ret=0 az=81.78<-5452 ze=66.51<-7566 Statuses=0009 0008 01:37:44 Msec=750 True Az=81.78 Ze=66.51 Az status=0009 Ze status=0008 01:37:45 Check angles 01:37:45 SkyScan query 01:37:45 SkyScan query done: ret=0 az=99.51<-6634 ze=66.495<-7567 Statuses=0009 0008 01:37:45 Msec=1500 True Az=99.51 Ze=66.495 Az status=0009 Ze status=0008 01:37:45 Check angles 01:37:45 SkyScan query 01:37:46 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 01:37:46 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 01:37:46 Check angles 01:37:46 SkyScan query 01:37:47 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 01:37:47 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 01:37:47 Check angles 01:37:47 SkyScan query 01:37:47 SkyScan query done: ret=0 az=151.665<-10111 ze=66.495<-7567 Statuses=0009 0008 01:37:47 Msec=3750 True Az=151.665 Ze=66.495 Az status=0009 Ze status=0008 01:37:48 Check angles 01:37:48 SkyScan query 01:37:48 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:37:48 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:37:48 Message to Master queued w/err=0: serial=258105 error=0 01:37:53 Received message from Master: op=Filter serial=258106 01:37:53 Color wheel filter change from 0 to 0 01:37:53 FLIGetFilterPos err=0 currentPosition=0 01:37:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:37:53 Filter is already there-color wheel unchanged 01:37:53 Received message from Master: op=Shutter serial=258107 01:37:53 Shutter LASER close 01:37:53 Received message from Camera: op=State serial=258109 01:37:53 GetSingleValue result=40 Value=cccccccc 01:37:53 SkyScan query 01:37:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:37:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:54 Parameters OK 01:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:54 Set A/D data flow result=40 01:37:54 Set A/D channel type result=40 01:37:54 Set A/D encoding result=40 01:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:54 Set channel filter=0.000000e+000 result=40 01:37:54 Config A/D Result=40 01:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:54 Get A/D filter: -9.255963e+061 result=40 01:37:54 Get A/D value=-858993460 result=40 01:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:54 Parameters OK 01:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:54 Set A/D data flow result=40 01:37:54 Set A/D channel type result=40 01:37:54 Set A/D encoding result=40 01:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:54 Set channel filter=0.000000e+000 result=40 01:37:54 Config A/D Result=40 01:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:54 Get A/D filter: -9.255963e+061 result=40 01:37:54 Get A/D value=-858993460 result=40 01:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:37:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:37:54 Aux= 01:37:54 Message to Camera, serial 258109 queued 01:38:30 Received message from Master: op=PointingHead serial=258121 01:38:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:38:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:38:30 Point started: ret=0 01:38:30 point_skyscan result=0 01:38:31 Check angles 01:38:31 SkyScan query 01:38:32 SkyScan query done: ret=0 az=134.97<-8998 ze=36.69<-9554 Statuses=0009 0009 01:38:32 Msec=0 True Az=134.97 Ze=36.69 Az status=0009 Ze status=0009 01:38:32 Check angles 01:38:32 SkyScan query 01:38:32 SkyScan query done: ret=0 az=117.495<-7833 ze=15.765<-10949 Statuses=0009 0009 01:38:32 Msec=750 True Az=117.495 Ze=15.765 Az status=0009 Ze status=0009 01:38:32 Check angles 01:38:32 SkyScan query 01:38:33 SkyScan query done: ret=0 az=100.125<-6675 ze=-5.325<-12355 Statuses=0009 0009 01:38:33 Msec=1500 True Az=100.125 Ze=-5.325 Az status=0009 Ze status=0009 01:38:33 Check angles 01:38:33 SkyScan query 01:38:34 SkyScan query done: ret=0 az=82.515<-5501 ze=-26.16<-13744 Statuses=0009 0009 01:38:34 Msec=2250 True Az=82.515 Ze=-26.16 Az status=0009 Ze status=0009 01:38:34 Check angles 01:38:34 SkyScan query 01:38:35 SkyScan query done: ret=0 az=65.16<-4344 ze=-38.58<-14572 Statuses=0009 0008 01:38:35 Msec=3000 True Az=65.16 Ze=-38.58 Az status=0009 Ze status=0008 01:38:35 Check angles 01:38:35 SkyScan query 01:38:35 SkyScan query done: ret=0 az=47.655<-3177 ze=-38.52<-14568 Statuses=0009 0008 01:38:35 Msec=3750 True Az=47.655 Ze=-38.52 Az status=0009 Ze status=0008 01:38:35 Check angles 01:38:35 SkyScan query 01:38:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:38:36 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:38:36 Message to Master queued w/err=0: serial=258121 error=0 01:38:41 Received message from Master: op=Filter serial=258122 01:38:41 Color wheel filter change from 0 to 0 01:38:41 FLIGetFilterPos err=0 currentPosition=0 01:38:41 FLIGetStepsRemaining err=0 RemainingSteps=0 01:38:41 Filter is already there-color wheel unchanged 01:38:41 Received message from Master: op=Shutter serial=258123 01:38:41 Shutter LASER close 01:38:41 Received message from Camera: op=State serial=258125 01:38:41 GetSingleValue result=40 Value=cccccccc 01:38:41 SkyScan query 01:38:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:38:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:42 Parameters OK 01:38:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:42 Set A/D data flow result=40 01:38:42 Set A/D channel type result=40 01:38:42 Set A/D encoding result=40 01:38:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:42 Set channel filter=0.000000e+000 result=40 01:38:42 Config A/D Result=40 01:38:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:42 Get A/D filter: -9.255963e+061 result=40 01:38:42 Get A/D value=-858993460 result=40 01:38:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:42 Parameters OK 01:38:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:42 Set A/D data flow result=40 01:38:42 Set A/D channel type result=40 01:38:42 Set A/D encoding result=40 01:38:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:42 Set channel filter=0.000000e+000 result=40 01:38:42 Config A/D Result=40 01:38:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:42 Get A/D filter: -9.255963e+061 result=40 01:38:42 Get A/D value=-858993460 result=40 01:38:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:38:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:38:42 Aux= 01:38:42 Message to Camera, serial 258125 queued 01:39:19 Received message from Master: op=PointingHead serial=258138 01:39:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:39:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:39:19 Point started: ret=0 01:39:19 point_skyscan result=0 01:39:20 Check angles 01:39:20 SkyScan query 01:39:20 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.115<-16541 Statuses=0009 0009 01:39:20 Msec=0 True Az=64.08 Ze=-68.115 Az status=0009 Ze status=0009 01:39:20 Check angles 01:39:20 SkyScan query 01:39:21 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.535<-17969 Statuses=0009 0009 01:39:21 Msec=750 True Az=81.78 Ze=-89.535 Az status=0009 Ze status=0009 01:39:21 Check angles 01:39:21 SkyScan query 01:39:22 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.505<-19367 Statuses=0009 0009 01:39:22 Msec=1500 True Az=99.33 Ze=-110.505 Az status=0009 Ze status=0009 01:39:22 Check angles 01:39:22 SkyScan query 01:39:23 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.43<-20762 Statuses=0009 0009 01:39:23 Msec=2250 True Az=116.715 Ze=-131.43 Az status=0009 Ze status=0009 01:39:23 Check angles 01:39:23 SkyScan query 01:39:23 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 01:39:23 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 01:39:24 Check angles 01:39:24 SkyScan query 01:39:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 01:39:24 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 01:39:24 Message to Master queued w/err=0: serial=258138 error=0 01:39:29 Received message from Master: op=Filter serial=258139 01:39:29 Color wheel filter change from 0 to 0 01:39:29 FLIGetFilterPos err=0 currentPosition=0 01:39:29 FLIGetStepsRemaining err=0 RemainingSteps=0 01:39:29 Filter is already there-color wheel unchanged 01:39:29 Received message from Master: op=Shutter serial=258140 01:39:29 Shutter LASER close 01:39:29 Received message from Camera: op=State serial=258142 01:39:29 GetSingleValue result=40 Value=cccccccc 01:39:29 SkyScan query 01:39:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:39:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:30 Parameters OK 01:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:30 Set A/D data flow result=40 01:39:30 Set A/D channel type result=40 01:39:30 Set A/D encoding result=40 01:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:30 Set channel filter=0.000000e+000 result=40 01:39:30 Config A/D Result=40 01:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:30 Get A/D filter: -9.255963e+061 result=40 01:39:30 Get A/D value=-858993460 result=40 01:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:30 Parameters OK 01:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:30 Set A/D data flow result=40 01:39:30 Set A/D channel type result=40 01:39:30 Set A/D encoding result=40 01:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:30 Set channel filter=0.000000e+000 result=40 01:39:30 Config A/D Result=40 01:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:30 Get A/D filter: -9.255963e+061 result=40 01:39:30 Get A/D value=-858993460 result=40 01:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:39:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:39:30 Aux= 01:39:30 Message to Camera, serial 258142 queued 01:40:07 Received message from Master: op=PointingHead serial=258155 01:40:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:40:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:40:07 Point started: ret=0 01:40:07 point_skyscan result=0 01:40:08 Check angles 01:40:08 SkyScan query 01:40:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 01:40:08 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 01:40:09 Check angles 01:40:09 SkyScan query 01:40:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:40:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:40:09 Message to Master queued w/err=0: serial=258155 error=0 01:40:14 Received message from Master: op=Filter serial=258156 01:40:14 Color wheel filter change from 0 to 0 01:40:14 FLIGetFilterPos err=0 currentPosition=0 01:40:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:40:14 Filter is already there-color wheel unchanged 01:40:14 Received message from Master: op=Shutter serial=258157 01:40:14 Shutter LASER open 01:40:15 Received message from Camera: op=State serial=258159 01:40:15 GetSingleValue result=40 Value=cccccccc 01:40:15 SkyScan query 01:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:40:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:15 Parameters OK 01:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:15 Set A/D data flow result=40 01:40:15 Set A/D channel type result=40 01:40:15 Set A/D encoding result=40 01:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:15 Set channel filter=0.000000e+000 result=40 01:40:15 Config A/D Result=40 01:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:15 Get A/D filter: -9.255963e+061 result=40 01:40:15 Get A/D value=-858993460 result=40 01:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:15 Parameters OK 01:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:15 Set A/D data flow result=40 01:40:15 Set A/D channel type result=40 01:40:15 Set A/D encoding result=40 01:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:15 Set channel filter=0.000000e+000 result=40 01:40:15 Config A/D Result=40 01:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:15 Get A/D filter: -9.255963e+061 result=40 01:40:15 Get A/D value=-858993460 result=40 01:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:40:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:40:15 Aux= 01:40:15 Message to Camera, serial 258159 queued 01:40:24 Received message from Master: op=Shutter serial=258169 01:40:24 Shutter LASER close 01:40:24 Received message from Master: op=PointingHead serial=258173 01:40:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:40:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:40:24 Point started: ret=0 01:40:24 point_skyscan result=0 01:40:25 Check angles 01:40:25 SkyScan query 01:40:26 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.295<-21553 Statuses=0009 0009 01:40:26 Msec=0 True Az=135.9 Ze=-143.295 Az status=0009 Ze status=0009 01:40:26 Check angles 01:40:26 SkyScan query 01:40:27 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.355<-20157 Statuses=0009 0009 01:40:27 Msec=750 True Az=153.435 Ze=-122.355 Az status=0009 Ze status=0009 01:40:27 Check angles 01:40:27 SkyScan query 01:40:27 SkyScan query done: ret=0 az=171.33<-11422 ze=-100.92<-18728 Statuses=0009 0009 01:40:27 Msec=1500 True Az=171.33 Ze=-100.92 Az status=0009 Ze status=0009 01:40:27 Check angles 01:40:27 SkyScan query 01:40:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.025<-17335 Statuses=0008 0009 01:40:28 Msec=2250 True Az=176.01 Ze=-80.025 Az status=0008 Ze status=0009 01:40:28 Check angles 01:40:28 SkyScan query 01:40:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 01:40:29 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 01:40:29 Check angles 01:40:29 SkyScan query 01:40:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:40:30 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:40:30 Message to Master queued w/err=0: serial=258173 error=0 01:40:35 Received message from Master: op=Filter serial=258174 01:40:35 Color wheel filter change from 0 to 0 01:40:35 FLIGetFilterPos err=0 currentPosition=0 01:40:35 FLIGetStepsRemaining err=0 RemainingSteps=0 01:40:35 Filter is already there-color wheel unchanged 01:40:35 Received message from Master: op=Shutter serial=258175 01:40:35 Shutter LASER close 01:40:35 Received message from Camera: op=State serial=258177 01:40:35 GetSingleValue result=40 Value=cccccccc 01:40:35 SkyScan query 01:40:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:40:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:35 Parameters OK 01:40:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:35 Set A/D data flow result=40 01:40:35 Set A/D channel type result=40 01:40:35 Set A/D encoding result=40 01:40:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:35 Set channel filter=0.000000e+000 result=40 01:40:35 Config A/D Result=40 01:40:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:35 Get A/D filter: -9.255963e+061 result=40 01:40:35 Get A/D value=-858993460 result=40 01:40:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:35 Parameters OK 01:40:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:35 Set A/D data flow result=40 01:40:35 Set A/D channel type result=40 01:40:35 Set A/D encoding result=40 01:40:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:35 Set channel filter=0.000000e+000 result=40 01:40:35 Config A/D Result=40 01:40:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:35 Get A/D filter: -9.255963e+061 result=40 01:40:35 Get A/D value=-858993460 result=40 01:40:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:40:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:40:35 Aux= 01:40:35 Message to Camera, serial 258177 queued 01:41:12 Received message from Master: op=PointingHead serial=258190 01:41:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:41:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:41:13 Point started: ret=0 01:41:13 point_skyscan result=0 01:41:14 Check angles 01:41:14 SkyScan query 01:41:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.315<-13421 Statuses=0008 0009 01:41:14 Msec=0 True Az=175.995 Ze=-21.315 Az status=0008 Ze status=0009 01:41:14 Check angles 01:41:14 SkyScan query 01:41:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.375<-12025 Statuses=0008 0009 01:41:15 Msec=750 True Az=175.995 Ze=-0.375 Az status=0008 Ze status=0009 01:41:15 Check angles 01:41:15 SkyScan query 01:41:16 SkyScan query done: ret=0 az=175.995<-11733 ze=20.55<-10630 Statuses=0008 0009 01:41:16 Msec=1500 True Az=175.995 Ze=20.55 Az status=0008 Ze status=0009 01:41:16 Check angles 01:41:16 SkyScan query 01:41:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 01:41:16 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 01:41:17 Check angles 01:41:17 SkyScan query 01:41:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 01:41:17 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 01:41:17 Message to Master queued w/err=0: serial=258190 error=0 01:41:22 Received message from Master: op=Filter serial=258191 01:41:22 Color wheel filter change from 0 to 0 01:41:22 FLIGetFilterPos err=0 currentPosition=0 01:41:22 FLIGetStepsRemaining err=0 RemainingSteps=0 01:41:22 Filter is already there-color wheel unchanged 01:41:22 Received message from Master: op=Shutter serial=258192 01:41:22 Shutter LASER close 01:41:22 Received message from Camera: op=State serial=258194 01:41:22 GetSingleValue result=40 Value=cccccccc 01:41:22 SkyScan query 01:41:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:41:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:23 Parameters OK 01:41:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:23 Set A/D data flow result=40 01:41:23 Set A/D channel type result=40 01:41:23 Set A/D encoding result=40 01:41:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:23 Set channel filter=0.000000e+000 result=40 01:41:23 Config A/D Result=40 01:41:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:23 Get A/D filter: -9.255963e+061 result=40 01:41:23 Get A/D value=-858993460 result=40 01:41:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:23 Parameters OK 01:41:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:23 Set A/D data flow result=40 01:41:23 Set A/D channel type result=40 01:41:23 Set A/D encoding result=40 01:41:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:23 Set channel filter=0.000000e+000 result=40 01:41:23 Config A/D Result=40 01:41:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:23 Get A/D filter: -9.255963e+061 result=40 01:41:23 Get A/D value=-858993460 result=40 01:41:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:41:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:41:23 Aux= 01:41:23 Message to Camera, serial 258194 queued 01:42:00 Received message from Master: op=PointingHead serial=258207 01:42:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:42:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:42:00 Point started: ret=0 01:42:00 point_skyscan result=0 01:42:01 Check angles 01:42:01 SkyScan query 01:42:02 SkyScan query done: ret=0 az=152.955<-10197 ze=8.55<-11430 Statuses=0009 0009 01:42:02 Msec=0 True Az=152.955 Ze=8.55 Az status=0009 Ze status=0009 01:42:02 Check angles 01:42:02 SkyScan query 01:42:02 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.36<-12824 Statuses=0009 0009 01:42:02 Msec=750 True Az=135.33 Ze=-12.36 Az status=0009 Ze status=0009 01:42:02 Check angles 01:42:02 SkyScan query 01:42:03 SkyScan query done: ret=0 az=117.84<-7856 ze=-33.33<-14222 Statuses=0009 0009 01:42:03 Msec=1500 True Az=117.84 Ze=-33.33 Az status=0009 Ze status=0009 01:42:03 Check angles 01:42:03 SkyScan query 01:42:04 SkyScan query done: ret=0 az=100.5<-6700 ze=-51.54<-15436 Statuses=0009 0009 01:42:04 Msec=2250 True Az=100.5 Ze=-51.54 Az status=0009 Ze status=0009 01:42:04 Check angles 01:42:04 SkyScan query 01:42:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 01:42:05 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 01:42:05 Check angles 01:42:05 SkyScan query 01:42:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:42:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:42:05 Message to Master queued w/err=0: serial=258207 error=0 01:42:10 Received message from Master: op=Filter serial=258208 01:42:10 Color wheel filter change from 0 to 0 01:42:10 FLIGetFilterPos err=0 currentPosition=0 01:42:10 FLIGetStepsRemaining err=0 RemainingSteps=0 01:42:10 Filter is already there-color wheel unchanged 01:42:10 Received message from Master: op=Shutter serial=258209 01:42:10 Shutter LASER close 01:42:11 Received message from Camera: op=State serial=258211 01:42:11 GetSingleValue result=40 Value=cccccccc 01:42:11 SkyScan query 01:42:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:42:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:11 Parameters OK 01:42:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:11 Set A/D data flow result=40 01:42:11 Set A/D channel type result=40 01:42:11 Set A/D encoding result=40 01:42:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:11 Set channel filter=0.000000e+000 result=40 01:42:11 Config A/D Result=40 01:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:11 Get A/D filter: -9.255963e+061 result=40 01:42:11 Get A/D value=-858993460 result=40 01:42:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:11 Parameters OK 01:42:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:11 Set A/D data flow result=40 01:42:11 Set A/D channel type result=40 01:42:11 Set A/D encoding result=40 01:42:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:11 Set channel filter=0.000000e+000 result=40 01:42:11 Config A/D Result=40 01:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:11 Get A/D filter: -9.255963e+061 result=40 01:42:11 Get A/D value=-858993460 result=40 01:42:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:42:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:42:11 Aux= 01:42:11 Message to Camera, serial 258211 queued 01:42:48 Received message from Master: op=PointingHead serial=258224 01:42:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:42:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:42:48 Point started: ret=0 01:42:48 point_skyscan result=0 01:42:49 Check angles 01:42:49 SkyScan query 01:42:50 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.21<-17414 Statuses=0009 0009 01:42:50 Msec=0 True Az=108.975 Ze=-81.21 Az status=0009 Ze status=0009 01:42:50 Check angles 01:42:50 SkyScan query 01:42:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.585<-18839 Statuses=0008 0009 01:42:50 Msec=750 True Az=112.995 Ze=-102.585 Az status=0008 Ze status=0009 01:42:51 Check angles 01:42:51 SkyScan query 01:42:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.585<-20239 Statuses=0008 0009 01:42:51 Msec=1500 True Az=112.995 Ze=-123.585 Az status=0008 Ze status=0009 01:42:51 Check angles 01:42:51 SkyScan query 01:42:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 01:42:52 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 01:42:52 Check angles 01:42:52 SkyScan query 01:42:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 01:42:53 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 01:42:53 Check angles 01:42:53 SkyScan query 01:42:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:42:53 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:42:53 Message to Master queued w/err=0: serial=258224 error=0 01:42:58 Received message from Master: op=Filter serial=258225 01:42:58 Color wheel filter change from 0 to 0 01:42:58 FLIGetFilterPos err=0 currentPosition=0 01:42:58 FLIGetStepsRemaining err=0 RemainingSteps=0 01:42:58 Filter is already there-color wheel unchanged 01:42:59 Received message from Master: op=Shutter serial=258226 01:42:59 Shutter LASER open 01:42:59 Received message from Camera: op=State serial=258228 01:42:59 GetSingleValue result=40 Value=cccccccc 01:42:59 SkyScan query 01:42:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:42:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:59 Parameters OK 01:42:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:59 Set A/D data flow result=40 01:42:59 Set A/D channel type result=40 01:42:59 Set A/D encoding result=40 01:42:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:59 Set channel filter=0.000000e+000 result=40 01:42:59 Config A/D Result=40 01:42:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:59 Get A/D filter: -9.255963e+061 result=40 01:42:59 Get A/D value=-858993460 result=40 01:42:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:59 Parameters OK 01:42:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:59 Set A/D data flow result=40 01:42:59 Set A/D channel type result=40 01:42:59 Set A/D encoding result=40 01:42:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:59 Set channel filter=0.000000e+000 result=40 01:42:59 Config A/D Result=40 01:42:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:59 Get A/D filter: -9.255963e+061 result=40 01:42:59 Get A/D value=-858993460 result=40 01:42:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:42:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:42:59 Aux= 01:42:59 Message to Camera, serial 258228 queued 01:43:08 Received message from Master: op=Shutter serial=258238 01:43:08 Shutter LASER close 01:43:08 Received message from Master: op=PointingHead serial=258242 01:43:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:43:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:43:09 Point started: ret=0 01:43:09 point_skyscan result=0 01:43:09 Check angles 01:43:09 SkyScan query 01:43:10 SkyScan query done: ret=0 az=90.09<-6006 ze=157.425<-1505 Statuses=0009 0009 01:43:10 Msec=0 True Az=90.09 Ze=157.425 Az status=0009 Ze status=0009 01:43:10 Check angles 01:43:10 SkyScan query 01:43:11 SkyScan query done: ret=0 az=72.585<-4839 ze=136.425<-2905 Statuses=0009 0009 01:43:11 Msec=750 True Az=72.585 Ze=136.425 Az status=0009 Ze status=0009 01:43:11 Check angles 01:43:11 SkyScan query 01:43:11 SkyScan query done: ret=0 az=55.215<-3681 ze=115.53<-4298 Statuses=0009 0009 01:43:11 Msec=1500 True Az=55.215 Ze=115.53 Az status=0009 Ze status=0009 01:43:12 Check angles 01:43:12 SkyScan query 01:43:12 SkyScan query done: ret=0 az=40.995<-2733 ze=94.545<-5697 Statuses=0009 0009 01:43:12 Msec=2250 True Az=40.995 Ze=94.545 Az status=0009 Ze status=0009 01:43:12 Check angles 01:43:12 SkyScan query 01:43:13 SkyScan query done: ret=0 az=40.995<-2733 ze=73.62<-7092 Statuses=0008 0009 01:43:13 Msec=3000 True Az=40.995 Ze=73.62 Az status=0008 Ze status=0009 01:43:13 Check angles 01:43:13 SkyScan query 01:43:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.965<-8469 Statuses=0008 0009 01:43:14 Msec=3750 True Az=40.995 Ze=52.965 Az status=0008 Ze status=0009 01:43:14 Check angles 01:43:14 SkyScan query 01:43:14 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 01:43:14 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 01:43:14 Message to Master queued w/err=0: serial=258242 error=0 01:43:19 Received message from Master: op=Filter serial=258243 01:43:19 Color wheel filter change from 0 to 0 01:43:19 FLIGetFilterPos err=0 currentPosition=0 01:43:19 FLIGetStepsRemaining err=0 RemainingSteps=0 01:43:19 Filter is already there-color wheel unchanged 01:43:20 Received message from Master: op=Shutter serial=258244 01:43:20 Shutter LASER close 01:43:20 Received message from Camera: op=State serial=258246 01:43:20 GetSingleValue result=40 Value=cccccccc 01:43:20 SkyScan query 01:43:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:43:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:20 Parameters OK 01:43:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:20 Set A/D data flow result=40 01:43:20 Set A/D channel type result=40 01:43:20 Set A/D encoding result=40 01:43:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:20 Set channel filter=0.000000e+000 result=40 01:43:20 Config A/D Result=40 01:43:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:20 Get A/D filter: -9.255963e+061 result=40 01:43:20 Get A/D value=-858993460 result=40 01:43:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:20 Parameters OK 01:43:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:20 Set A/D data flow result=40 01:43:20 Set A/D channel type result=40 01:43:20 Set A/D encoding result=40 01:43:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:20 Set channel filter=0.000000e+000 result=40 01:43:20 Config A/D Result=40 01:43:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:20 Get A/D filter: -9.255963e+061 result=40 01:43:20 Get A/D value=-858993460 result=40 01:43:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:43:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:43:20 Aux= 01:43:20 Message to Camera, serial 258246 queued 01:43:57 Received message from Master: op=PointingHead serial=258259 01:43:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:43:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:43:57 Point started: ret=0 01:43:57 point_skyscan result=0 01:43:58 Check angles 01:43:58 SkyScan query 01:43:59 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 01:43:59 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 01:43:59 Check angles 01:43:59 SkyScan query 01:44:00 SkyScan query done: ret=0 az=81.375<-5425 ze=66.495<-7567 Statuses=0009 0008 01:44:00 Msec=750 True Az=81.375 Ze=66.495 Az status=0009 Ze status=0008 01:44:00 Check angles 01:44:00 SkyScan query 01:44:00 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 01:44:00 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 01:44:00 Check angles 01:44:00 SkyScan query 01:44:01 SkyScan query done: ret=0 az=116.355<-7757 ze=66.495<-7567 Statuses=0009 0008 01:44:01 Msec=2250 True Az=116.355 Ze=66.495 Az status=0009 Ze status=0008 01:44:01 Check angles 01:44:01 SkyScan query 01:44:02 SkyScan query done: ret=0 az=133.845<-8923 ze=66.495<-7567 Statuses=0009 0008 01:44:02 Msec=3000 True Az=133.845 Ze=66.495 Az status=0009 Ze status=0008 01:44:02 Check angles 01:44:02 SkyScan query 01:44:03 SkyScan query done: ret=0 az=151.305<-10087 ze=66.495<-7567 Statuses=0009 0008 01:44:03 Msec=3750 True Az=151.305 Ze=66.495 Az status=0009 Ze status=0008 01:44:03 Check angles 01:44:03 SkyScan query 01:44:03 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:44:03 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:44:03 Message to Master queued w/err=0: serial=258259 error=0 01:44:08 Received message from Master: op=Filter serial=258260 01:44:08 Color wheel filter change from 0 to 0 01:44:08 FLIGetFilterPos err=0 currentPosition=0 01:44:08 FLIGetStepsRemaining err=0 RemainingSteps=0 01:44:08 Filter is already there-color wheel unchanged 01:44:08 Received message from Master: op=Shutter serial=258261 01:44:08 Shutter LASER close 01:44:08 Received message from Camera: op=State serial=258263 01:44:08 GetSingleValue result=40 Value=cccccccc 01:44:08 SkyScan query 01:44:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:44:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:09 Parameters OK 01:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:09 Set A/D data flow result=40 01:44:09 Set A/D channel type result=40 01:44:09 Set A/D encoding result=40 01:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:09 Set channel filter=0.000000e+000 result=40 01:44:09 Config A/D Result=40 01:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:09 Get A/D filter: -9.255963e+061 result=40 01:44:09 Get A/D value=-858993460 result=40 01:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:09 Parameters OK 01:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:09 Set A/D data flow result=40 01:44:09 Set A/D channel type result=40 01:44:09 Set A/D encoding result=40 01:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:09 Set channel filter=0.000000e+000 result=40 01:44:09 Config A/D Result=40 01:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:09 Get A/D filter: -9.255963e+061 result=40 01:44:09 Get A/D value=-858993460 result=40 01:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:44:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:44:09 Aux= 01:44:09 Message to Camera, serial 258263 queued 01:44:46 Received message from Master: op=PointingHead serial=258276 01:44:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:44:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:44:46 Point started: ret=0 01:44:46 point_skyscan result=0 01:44:47 Check angles 01:44:47 SkyScan query 01:44:48 SkyScan query done: ret=0 az=135.045<-9003 ze=36.795<-9547 Statuses=0009 0009 01:44:48 Msec=0 True Az=135.045 Ze=36.795 Az status=0009 Ze status=0009 01:44:48 Check angles 01:44:48 SkyScan query 01:44:48 SkyScan query done: ret=0 az=117.6<-7840 ze=15.84<-10944 Statuses=0009 0009 01:44:48 Msec=750 True Az=117.6 Ze=15.84 Az status=0009 Ze status=0009 01:44:49 Check angles 01:44:49 SkyScan query 01:44:49 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.535<-12369 Statuses=0009 0009 01:44:49 Msec=1500 True Az=99.87 Ze=-5.535 Az status=0009 Ze status=0009 01:44:49 Check angles 01:44:49 SkyScan query 01:44:50 SkyScan query done: ret=0 az=82.305<-5487 ze=-26.505<-13767 Statuses=0009 0009 01:44:50 Msec=2250 True Az=82.305 Ze=-26.505 Az status=0009 Ze status=0009 01:44:50 Check angles 01:44:50 SkyScan query 01:44:51 SkyScan query done: ret=0 az=64.47<-4298 ze=-38.58<-14572 Statuses=0009 0008 01:44:51 Msec=3000 True Az=64.47 Ze=-38.58 Az status=0009 Ze status=0008 01:44:51 Check angles 01:44:51 SkyScan query 01:44:51 SkyScan query done: ret=0 az=47.01<-3134 ze=-38.52<-14568 Statuses=0009 0008 01:44:51 Msec=3750 True Az=47.01 Ze=-38.52 Az status=0009 Ze status=0008 01:44:52 Check angles 01:44:52 SkyScan query 01:44:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:44:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:44:52 Message to Master queued w/err=0: serial=258276 error=0 01:44:57 Received message from Master: op=Filter serial=258277 01:44:57 Color wheel filter change from 0 to 0 01:44:57 FLIGetFilterPos err=0 currentPosition=0 01:44:57 FLIGetStepsRemaining err=0 RemainingSteps=0 01:44:57 Filter is already there-color wheel unchanged 01:44:57 Received message from Master: op=Shutter serial=258278 01:44:57 Shutter LASER close 01:44:57 Received message from Camera: op=State serial=258280 01:44:57 GetSingleValue result=40 Value=cccccccc 01:44:57 SkyScan query 01:44:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:44:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:58 Parameters OK 01:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:58 Set A/D data flow result=40 01:44:58 Set A/D channel type result=40 01:44:58 Set A/D encoding result=40 01:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:58 Set channel filter=0.000000e+000 result=40 01:44:58 Config A/D Result=40 01:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:58 Get A/D filter: -9.255963e+061 result=40 01:44:58 Get A/D value=-858993460 result=40 01:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:58 Parameters OK 01:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:58 Set A/D data flow result=40 01:44:58 Set A/D channel type result=40 01:44:58 Set A/D encoding result=40 01:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:58 Set channel filter=0.000000e+000 result=40 01:44:58 Config A/D Result=40 01:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:58 Get A/D filter: -9.255963e+061 result=40 01:44:58 Get A/D value=-858993460 result=40 01:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:44:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:44:58 Aux= 01:44:58 Message to Camera, serial 258280 queued 01:45:27 Received message from Master: op=Identify serial=258282 01:45:34 Received message from Master: op=PointingHead serial=258295 01:45:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:45:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:45:34 Point started: ret=0 01:45:34 point_skyscan result=0 01:45:35 Check angles 01:45:35 SkyScan query 01:45:35 SkyScan query done: ret=0 az=63.795<-4253 ze=-67.995<-16533 Statuses=0009 0009 01:45:35 Msec=0 True Az=63.795 Ze=-67.995 Az status=0009 Ze status=0009 01:45:36 Check angles 01:45:36 SkyScan query 01:45:36 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.475<-17965 Statuses=0009 0009 01:45:36 Msec=750 True Az=81.585 Ze=-89.475 Az status=0009 Ze status=0009 01:45:36 Check angles 01:45:36 SkyScan query 01:45:37 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.4<-19360 Statuses=0009 0009 01:45:37 Msec=1500 True Az=99.165 Ze=-110.4 Az status=0009 Ze status=0009 01:45:37 Check angles 01:45:37 SkyScan query 01:45:38 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.34<-20756 Statuses=0009 0009 01:45:38 Msec=2250 True Az=116.55 Ze=-131.34 Az status=0009 Ze status=0009 01:45:38 Check angles 01:45:38 SkyScan query 01:45:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 [UTC 2018-12-19 01:45:38] 01:45:38 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 01:45:39 Check angles 01:45:39 SkyScan query 01:45:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 01:45:39 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 01:45:39 Message to Master queued w/err=0: serial=258295 error=0 01:45:44 Received message from Master: op=Filter serial=258296 01:45:44 Color wheel filter change from 0 to 0 01:45:44 FLIGetFilterPos err=0 currentPosition=0 01:45:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:45:44 Filter is already there-color wheel unchanged 01:45:44 Received message from Master: op=Shutter serial=258297 01:45:44 Shutter LASER close 01:45:44 Received message from Camera: op=State serial=258299 01:45:44 GetSingleValue result=40 Value=cccccccc 01:45:44 SkyScan query 01:45:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:45:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:45 Parameters OK 01:45:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:45 Set A/D data flow result=40 01:45:45 Set A/D channel type result=40 01:45:45 Set A/D encoding result=40 01:45:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:45 Set channel filter=0.000000e+000 result=40 01:45:45 Config A/D Result=40 01:45:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:45 Get A/D filter: -9.255963e+061 result=40 01:45:45 Get A/D value=-858993460 result=40 01:45:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:45 Parameters OK 01:45:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:45 Set A/D data flow result=40 01:45:45 Set A/D channel type result=40 01:45:45 Set A/D encoding result=40 01:45:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:45 Set channel filter=0.000000e+000 result=40 01:45:45 Config A/D Result=40 01:45:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:45 Get A/D filter: -9.255963e+061 result=40 01:45:45 Get A/D value=-858993460 result=40 01:45:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:45:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:45:45 Aux= 01:45:45 Message to Camera, serial 258299 queued 01:46:22 Received message from Master: op=PointingHead serial=258312 01:46:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:46:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:46:22 Point started: ret=0 01:46:22 point_skyscan result=0 01:46:23 Check angles 01:46:23 SkyScan query 01:46:24 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 01:46:24 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 01:46:24 Check angles 01:46:24 SkyScan query 01:46:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:46:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:46:24 Message to Master queued w/err=0: serial=258312 error=0 01:46:29 Received message from Master: op=Filter serial=258313 01:46:29 Color wheel filter change from 0 to 0 01:46:29 FLIGetFilterPos err=0 currentPosition=0 01:46:29 FLIGetStepsRemaining err=0 RemainingSteps=0 01:46:29 Filter is already there-color wheel unchanged 01:46:30 Received message from Master: op=Shutter serial=258314 01:46:30 Shutter LASER open 01:46:30 Received message from Camera: op=State serial=258316 01:46:30 GetSingleValue result=40 Value=cccccccc 01:46:30 SkyScan query 01:46:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:46:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:30 Parameters OK 01:46:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:30 Set A/D data flow result=40 01:46:30 Set A/D channel type result=40 01:46:30 Set A/D encoding result=40 01:46:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:30 Set channel filter=0.000000e+000 result=40 01:46:30 Config A/D Result=40 01:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:30 Get A/D filter: -9.255963e+061 result=40 01:46:30 Get A/D value=-858993460 result=40 01:46:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:30 Parameters OK 01:46:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:30 Set A/D data flow result=40 01:46:30 Set A/D channel type result=40 01:46:30 Set A/D encoding result=40 01:46:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:30 Set channel filter=0.000000e+000 result=40 01:46:30 Config A/D Result=40 01:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:30 Get A/D filter: -9.255963e+061 result=40 01:46:30 Get A/D value=-858993460 result=40 01:46:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:46:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:46:30 Aux= 01:46:30 Message to Camera, serial 258316 queued 01:46:39 Received message from Master: op=Shutter serial=258326 01:46:39 Shutter LASER close 01:46:39 Received message from Master: op=PointingHead serial=258330 01:46:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:46:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:46:40 Point started: ret=0 01:46:40 point_skyscan result=0 01:46:40 Check angles 01:46:40 SkyScan query 01:46:41 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.52<-21568 Statuses=0009 0009 01:46:41 Msec=0 True Az=135.705 Ze=-143.52 Az status=0009 Ze status=0009 01:46:41 Check angles 01:46:41 SkyScan query 01:46:42 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.55<-20170 Statuses=0009 0009 01:46:42 Msec=750 True Az=153.24 Ze=-122.55 Az status=0009 Ze status=0009 01:46:42 Check angles 01:46:42 SkyScan query 01:46:42 SkyScan query done: ret=0 az=170.67<-11378 ze=-101.67<-18778 Statuses=0009 0009 01:46:42 Msec=1500 True Az=170.67 Ze=-101.67 Az status=0009 Ze status=0009 01:46:43 Check angles 01:46:43 SkyScan query 01:46:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.64<-17376 Statuses=0008 0009 01:46:43 Msec=2250 True Az=175.995 Ze=-80.64 Az status=0008 Ze status=0009 01:46:43 Check angles 01:46:43 SkyScan query 01:46:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.715<-15981 Statuses=0008 0009 01:46:44 Msec=3000 True Az=176.01 Ze=-59.715 Az status=0008 Ze status=0009 01:46:44 Check angles 01:46:44 SkyScan query 01:46:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 01:46:45 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 01:46:45 Message to Master queued w/err=0: serial=258330 error=0 01:46:50 Received message from Master: op=Filter serial=258331 01:46:50 Color wheel filter change from 0 to 0 01:46:50 FLIGetFilterPos err=0 currentPosition=0 01:46:50 FLIGetStepsRemaining err=0 RemainingSteps=0 01:46:50 Filter is already there-color wheel unchanged 01:46:50 Received message from Master: op=Shutter serial=258332 01:46:50 Shutter LASER close 01:46:50 Received message from Camera: op=State serial=258334 01:46:50 GetSingleValue result=40 Value=cccccccc 01:46:50 SkyScan query 01:46:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:46:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:51 Parameters OK 01:46:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:51 Set A/D data flow result=40 01:46:51 Set A/D channel type result=40 01:46:51 Set A/D encoding result=40 01:46:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:51 Set channel filter=0.000000e+000 result=40 01:46:51 Config A/D Result=40 01:46:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:51 Get A/D filter: -9.255963e+061 result=40 01:46:51 Get A/D value=-858993460 result=40 01:46:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:51 Parameters OK 01:46:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:51 Set A/D data flow result=40 01:46:51 Set A/D channel type result=40 01:46:51 Set A/D encoding result=40 01:46:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:51 Set channel filter=0.000000e+000 result=40 01:46:51 Config A/D Result=40 01:46:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:51 Get A/D filter: -9.255963e+061 result=40 01:46:51 Get A/D value=-858993460 result=40 01:46:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:46:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:46:51 Aux= 01:46:51 Message to Camera, serial 258334 queued 01:47:28 Received message from Master: op=PointingHead serial=258347 01:47:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:47:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:47:28 Point started: ret=0 01:47:28 point_skyscan result=0 01:47:29 Check angles 01:47:29 SkyScan query 01:47:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.69<-13446 Statuses=0008 0009 01:47:29 Msec=0 True Az=175.995 Ze=-21.69 Az status=0008 Ze status=0009 01:47:29 Check angles 01:47:29 SkyScan query 01:47:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.6<-12040 Statuses=0008 0009 01:47:30 Msec=750 True Az=175.995 Ze=-0.6 Az status=0008 Ze status=0009 01:47:30 Check angles 01:47:30 SkyScan query 01:47:31 SkyScan query done: ret=0 az=175.995<-11733 ze=20.205<-10653 Statuses=0008 0009 01:47:31 Msec=1500 True Az=175.995 Ze=20.205 Az status=0008 Ze status=0009 01:47:31 Check angles 01:47:31 SkyScan query 01:47:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.565<-9429 Statuses=0008 0009 01:47:32 Msec=2250 True Az=175.995 Ze=38.565 Az status=0008 Ze status=0009 01:47:32 Check angles 01:47:32 SkyScan query 01:47:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.55<-9430 Statuses=0008 0008 01:47:32 Msec=3000 True Az=175.995 Ze=38.55 Az status=0008 Ze status=0008 01:47:32 Message to Master queued w/err=0: serial=258347 error=0 01:47:37 Received message from Master: op=Filter serial=258348 01:47:37 Color wheel filter change from 0 to 0 01:47:37 FLIGetFilterPos err=0 currentPosition=0 01:47:37 FLIGetStepsRemaining err=0 RemainingSteps=0 01:47:37 Filter is already there-color wheel unchanged 01:47:37 Received message from Master: op=Shutter serial=258349 01:47:37 Shutter LASER close 01:47:37 Received message from Camera: op=State serial=258351 01:47:37 GetSingleValue result=40 Value=cccccccc 01:47:37 SkyScan query 01:47:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:47:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:38 Parameters OK 01:47:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:38 Set A/D data flow result=40 01:47:38 Set A/D channel type result=40 01:47:38 Set A/D encoding result=40 01:47:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:38 Set channel filter=0.000000e+000 result=40 01:47:38 Config A/D Result=40 01:47:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:38 Get A/D filter: -9.255963e+061 result=40 01:47:38 Get A/D value=-858993460 result=40 01:47:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:38 Parameters OK 01:47:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:38 Set A/D data flow result=40 01:47:38 Set A/D channel type result=40 01:47:38 Set A/D encoding result=40 01:47:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:38 Set channel filter=0.000000e+000 result=40 01:47:38 Config A/D Result=40 01:47:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:38 Get A/D filter: -9.255963e+061 result=40 01:47:38 Get A/D value=-858993460 result=40 01:47:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:47:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:47:38 Aux= 01:47:38 Message to Camera, serial 258351 queued 01:48:15 Received message from Master: op=PointingHead serial=258364 01:48:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:48:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:48:15 Point started: ret=0 01:48:15 point_skyscan result=0 01:48:16 Check angles 01:48:16 SkyScan query 01:48:17 SkyScan query done: ret=0 az=152.745<-10183 ze=8.31<-11446 Statuses=0009 0009 01:48:17 Msec=0 True Az=152.745 Ze=8.31 Az status=0009 Ze status=0009 01:48:17 Check angles 01:48:17 SkyScan query 01:48:17 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.57<-12838 Statuses=0009 0009 01:48:17 Msec=750 True Az=135.27 Ze=-12.57 Az status=0009 Ze status=0009 01:48:18 Check angles 01:48:18 SkyScan query 01:48:18 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.555<-14237 Statuses=0009 0009 01:48:18 Msec=1500 True Az=117.795 Ze=-33.555 Az status=0009 Ze status=0009 01:48:18 Check angles 01:48:18 SkyScan query 01:48:19 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.555<-15437 Statuses=0009 0009 01:48:19 Msec=2250 True Az=100.395 Ze=-51.555 Az status=0009 Ze status=0009 01:48:19 Check angles 01:48:19 SkyScan query 01:48:20 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:48:20 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:48:20 Check angles 01:48:20 SkyScan query 01:48:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:48:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:48:20 Message to Master queued w/err=0: serial=258364 error=0 01:48:25 Received message from Master: op=Filter serial=258365 01:48:25 Color wheel filter change from 0 to 0 01:48:25 FLIGetFilterPos err=0 currentPosition=0 01:48:25 FLIGetStepsRemaining err=0 RemainingSteps=0 01:48:25 Filter is already there-color wheel unchanged 01:48:26 Received message from Master: op=Shutter serial=258366 01:48:26 Shutter LASER close 01:48:26 Received message from Camera: op=State serial=258368 01:48:26 GetSingleValue result=40 Value=cccccccc 01:48:26 SkyScan query 01:48:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:48:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:48:26 Parameters OK 01:48:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:48:26 Set A/D data flow result=40 01:48:26 Set A/D channel type result=40 01:48:26 Set A/D encoding result=40 01:48:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:48:26 Set channel filter=0.000000e+000 result=40 01:48:26 Config A/D Result=40 01:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:48:26 Get A/D filter: -9.255963e+061 result=40 01:48:26 Get A/D value=-858993460 result=40 01:48:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:48:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:48:26 Parameters OK 01:48:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:48:26 Set A/D data flow result=40 01:48:26 Set A/D channel type result=40 01:48:26 Set A/D encoding result=40 01:48:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:48:26 Set channel filter=0.000000e+000 result=40 01:48:26 Config A/D Result=40 01:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:48:26 Get A/D filter: -9.255963e+061 result=40 01:48:26 Get A/D value=-858993460 result=40 01:48:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:48:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:48:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:48:26 Aux= 01:48:26 Message to Camera, serial 258368 queued 01:49:03 Received message from Master: op=PointingHead serial=258381 01:49:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:49:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:49:03 Point started: ret=0 01:49:03 point_skyscan result=0 01:49:04 Check angles 01:49:04 SkyScan query 01:49:05 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.435<-17429 Statuses=0009 0009 01:49:05 Msec=0 True Az=109.14 Ze=-81.435 Az status=0009 Ze status=0009 01:49:05 Check angles 01:49:05 SkyScan query 01:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.84<-18856 Statuses=0008 0009 01:49:05 Msec=750 True Az=112.995 Ze=-102.84 Az status=0008 Ze status=0009 01:49:06 Check angles 01:49:06 SkyScan query 01:49:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 01:49:06 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 01:49:06 Check angles 01:49:06 SkyScan query 01:49:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 01:49:07 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 01:49:07 Check angles 01:49:07 SkyScan query 01:49:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.095<-23073 Statuses=0008 0009 01:49:08 Msec=3000 True Az=112.995 Ze=-166.095 Az status=0008 Ze status=0009 01:49:08 Check angles 01:49:08 SkyScan query 01:49:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:49:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:49:08 Message to Master queued w/err=0: serial=258381 error=0 01:49:13 Received message from Master: op=Filter serial=258382 01:49:13 Color wheel filter change from 0 to 0 01:49:13 FLIGetFilterPos err=0 currentPosition=0 01:49:13 FLIGetStepsRemaining err=0 RemainingSteps=0 01:49:13 Filter is already there-color wheel unchanged 01:49:14 Received message from Master: op=Shutter serial=258383 01:49:14 Shutter LASER open 01:49:14 Received message from Camera: op=State serial=258385 01:49:14 GetSingleValue result=40 Value=cccccccc 01:49:14 SkyScan query 01:49:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:49:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:14 Parameters OK 01:49:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:14 Set A/D data flow result=40 01:49:14 Set A/D channel type result=40 01:49:14 Set A/D encoding result=40 01:49:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:14 Set channel filter=0.000000e+000 result=40 01:49:14 Config A/D Result=40 01:49:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:14 Get A/D filter: -9.255963e+061 result=40 01:49:14 Get A/D value=-858993460 result=40 01:49:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:14 Parameters OK 01:49:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:14 Set A/D data flow result=40 01:49:14 Set A/D channel type result=40 01:49:14 Set A/D encoding result=40 01:49:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:14 Set channel filter=0.000000e+000 result=40 01:49:14 Config A/D Result=40 01:49:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:14 Get A/D filter: -9.255963e+061 result=40 01:49:14 Get A/D value=-858993460 result=40 01:49:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:49:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:49:14 Aux= 01:49:14 Message to Camera, serial 258385 queued 01:49:23 Received message from Master: op=Shutter serial=258395 01:49:23 Shutter LASER close 01:49:23 Received message from Master: op=PointingHead serial=258399 01:49:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:49:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:49:24 Point started: ret=0 01:49:24 point_skyscan result=0 01:49:24 Check angles 01:49:24 SkyScan query 01:49:25 SkyScan query done: ret=0 az=89.85<-5990 ze=157.2<-1520 Statuses=0009 0009 01:49:25 Msec=0 True Az=89.85 Ze=157.2 Az status=0009 Ze status=0009 01:49:25 Check angles 01:49:25 SkyScan query 01:49:26 SkyScan query done: ret=0 az=72.015<-4801 ze=135.795<-2947 Statuses=0009 0009 01:49:26 Msec=750 True Az=72.015 Ze=135.795 Az status=0009 Ze status=0009 01:49:26 Check angles 01:49:26 SkyScan query 01:49:26 SkyScan query done: ret=0 az=54.27<-3618 ze=114.345<-4377 Statuses=0009 0009 01:49:26 Msec=1500 True Az=54.27 Ze=114.345 Az status=0009 Ze status=0009 01:49:27 Check angles 01:49:27 SkyScan query 01:49:27 SkyScan query done: ret=0 az=40.98<-2732 ze=93<-5800 Statuses=0009 0009 01:49:27 Msec=2250 True Az=40.98 Ze=93 Az status=0009 Ze status=0009 01:49:27 Check angles 01:49:27 SkyScan query 01:49:28 SkyScan query done: ret=0 az=40.995<-2733 ze=72.045<-7197 Statuses=0008 0009 01:49:28 Msec=3000 True Az=40.995 Ze=72.045 Az status=0008 Ze status=0009 01:49:28 Check angles 01:49:28 SkyScan query 01:49:29 SkyScan query done: ret=0 az=40.98<-2732 ze=52.08<-8528 Statuses=0008 0009 01:49:29 Msec=3750 True Az=40.98 Ze=52.08 Az status=0008 Ze status=0009 01:49:29 Check angles 01:49:29 SkyScan query 01:49:29 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 01:49:29 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 01:49:29 Message to Master queued w/err=0: serial=258399 error=0 01:49:34 Received message from Master: op=Filter serial=258400 01:49:34 Color wheel filter change from 0 to 0 01:49:34 FLIGetFilterPos err=0 currentPosition=0 01:49:34 FLIGetStepsRemaining err=0 RemainingSteps=0 01:49:34 Filter is already there-color wheel unchanged 01:49:35 Received message from Master: op=Shutter serial=258401 01:49:35 Shutter LASER close 01:49:35 Received message from Camera: op=State serial=258403 01:49:35 GetSingleValue result=40 Value=cccccccc 01:49:35 SkyScan query 01:49:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:49:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:35 Parameters OK 01:49:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:35 Set A/D data flow result=40 01:49:35 Set A/D channel type result=40 01:49:35 Set A/D encoding result=40 01:49:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:35 Set channel filter=0.000000e+000 result=40 01:49:35 Config A/D Result=40 01:49:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:35 Get A/D filter: -9.255963e+061 result=40 01:49:35 Get A/D value=-858993460 result=40 01:49:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:35 Parameters OK 01:49:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:35 Set A/D data flow result=40 01:49:35 Set A/D channel type result=40 01:49:35 Set A/D encoding result=40 01:49:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:35 Set channel filter=0.000000e+000 result=40 01:49:35 Config A/D Result=40 01:49:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:35 Get A/D filter: -9.255963e+061 result=40 01:49:35 Get A/D value=-858993460 result=40 01:49:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:49:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:49:35 Aux= 01:49:35 Message to Camera, serial 258403 queued 01:50:12 Received message from Master: op=PointingHead serial=258416 01:50:12 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:50:12 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:50:13 Point started: ret=0 01:50:13 point_skyscan result=0 01:50:13 Check angles 01:50:13 SkyScan query 01:50:14 SkyScan query done: ret=0 az=64.065<-4271 ze=66.51<-7566 Statuses=0009 0008 01:50:14 Msec=0 True Az=64.065 Ze=66.51 Az status=0009 Ze status=0008 01:50:14 Check angles 01:50:14 SkyScan query 01:50:15 SkyScan query done: ret=0 az=81.315<-5421 ze=66.495<-7567 Statuses=0009 0008 01:50:15 Msec=750 True Az=81.315 Ze=66.495 Az status=0009 Ze status=0008 01:50:15 Check angles 01:50:15 SkyScan query 01:50:15 SkyScan query done: ret=0 az=98.925<-6595 ze=66.495<-7567 Statuses=0009 0008 01:50:15 Msec=1500 True Az=98.925 Ze=66.495 Az status=0009 Ze status=0008 01:50:16 Check angles 01:50:16 SkyScan query 01:50:16 SkyScan query done: ret=0 az=116.43<-7762 ze=66.495<-7567 Statuses=0009 0008 01:50:16 Msec=2250 True Az=116.43 Ze=66.495 Az status=0009 Ze status=0008 01:50:16 Check angles 01:50:16 SkyScan query 01:50:17 SkyScan query done: ret=0 az=133.845<-8923 ze=66.495<-7567 Statuses=0009 0008 01:50:17 Msec=3000 True Az=133.845 Ze=66.495 Az status=0009 Ze status=0008 01:50:17 Check angles 01:50:17 SkyScan query 01:50:18 SkyScan query done: ret=0 az=151.29<-10086 ze=66.495<-7567 Statuses=0009 0008 01:50:18 Msec=3750 True Az=151.29 Ze=66.495 Az status=0009 Ze status=0008 01:50:18 Check angles 01:50:18 SkyScan query 01:50:18 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:50:18 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:50:18 Message to Master queued w/err=0: serial=258416 error=0 01:50:23 Received message from Master: op=Filter serial=258417 01:50:23 Color wheel filter change from 0 to 0 01:50:23 FLIGetFilterPos err=0 currentPosition=0 01:50:23 FLIGetStepsRemaining err=0 RemainingSteps=0 01:50:23 Filter is already there-color wheel unchanged 01:50:24 Received message from Master: op=Shutter serial=258418 01:50:24 Shutter LASER close 01:50:24 Received message from Camera: op=State serial=258420 01:50:24 GetSingleValue result=40 Value=cccccccc 01:50:24 SkyScan query 01:50:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:50:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:24 Parameters OK 01:50:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:24 Set A/D data flow result=40 01:50:24 Set A/D channel type result=40 01:50:24 Set A/D encoding result=40 01:50:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:24 Set channel filter=0.000000e+000 result=40 01:50:24 Config A/D Result=40 01:50:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:24 Get A/D filter: -9.255963e+061 result=40 01:50:24 Get A/D value=-858993460 result=40 01:50:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:24 Parameters OK 01:50:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:24 Set A/D data flow result=40 01:50:24 Set A/D channel type result=40 01:50:24 Set A/D encoding result=40 01:50:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:24 Set channel filter=0.000000e+000 result=40 01:50:24 Config A/D Result=40 01:50:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:24 Get A/D filter: -9.255963e+061 result=40 01:50:24 Get A/D value=-858993460 result=40 01:50:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:24 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:50:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:50:24 Aux= 01:50:24 Message to Camera, serial 258420 queued 01:51:00 Received message from Master: op=PointingHead serial=258432 01:51:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:51:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:51:00 Point started: ret=0 01:51:00 point_skyscan result=0 01:51:01 Check angles 01:51:01 SkyScan query 01:51:02 SkyScan query done: ret=0 az=134.595<-8973 ze=36.33<-9578 Statuses=0009 0009 01:51:02 Msec=0 True Az=134.595 Ze=36.33 Az status=0009 Ze status=0009 01:51:02 Check angles 01:51:02 SkyScan query 01:51:03 SkyScan query done: ret=0 az=117.135<-7809 ze=15.42<-10972 Statuses=0009 0009 01:51:03 Msec=750 True Az=117.135 Ze=15.42 Az status=0009 Ze status=0009 01:51:03 Check angles 01:51:03 SkyScan query 01:51:03 SkyScan query done: ret=0 az=99.705<-6647 ze=-5.565<-12371 Statuses=0009 0009 01:51:03 Msec=1500 True Az=99.705 Ze=-5.565 Az status=0009 Ze status=0009 01:51:03 Check angles 01:51:03 SkyScan query 01:51:04 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.52<-13768 Statuses=0009 0009 01:51:04 Msec=2250 True Az=82.26 Ze=-26.52 Az status=0009 Ze status=0009 01:51:04 Check angles 01:51:04 SkyScan query 01:51:05 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.565<-14571 Statuses=0009 0008 01:51:05 Msec=3000 True Az=64.74 Ze=-38.565 Az status=0009 Ze status=0008 01:51:05 Check angles 01:51:05 SkyScan query 01:51:06 SkyScan query done: ret=0 az=47.25<-3150 ze=-38.52<-14568 Statuses=0009 0008 01:51:06 Msec=3750 True Az=47.25 Ze=-38.52 Az status=0009 Ze status=0008 01:51:06 Check angles 01:51:06 SkyScan query 01:51:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:51:06 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:51:06 Message to Master queued w/err=0: serial=258432 error=0 01:51:11 Received message from Master: op=Filter serial=258433 01:51:11 Color wheel filter change from 0 to 0 01:51:11 FLIGetFilterPos err=0 currentPosition=0 01:51:11 FLIGetStepsRemaining err=0 RemainingSteps=0 01:51:11 Filter is already there-color wheel unchanged 01:51:11 Received message from Master: op=Shutter serial=258434 01:51:11 Shutter LASER close 01:51:11 Received message from Camera: op=State serial=258436 01:51:11 GetSingleValue result=40 Value=cccccccc 01:51:11 SkyScan query 01:51:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:51:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:12 Parameters OK 01:51:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:12 Set A/D data flow result=40 01:51:12 Set A/D channel type result=40 01:51:12 Set A/D encoding result=40 01:51:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:12 Set channel filter=0.000000e+000 result=40 01:51:12 Config A/D Result=40 01:51:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:12 Get A/D filter: -9.255963e+061 result=40 01:51:12 Get A/D value=-858993460 result=40 01:51:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:12 Parameters OK 01:51:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:12 Set A/D data flow result=40 01:51:12 Set A/D channel type result=40 01:51:12 Set A/D encoding result=40 01:51:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:12 Set channel filter=0.000000e+000 result=40 01:51:12 Config A/D Result=40 01:51:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:12 Get A/D filter: -9.255963e+061 result=40 01:51:12 Get A/D value=-858993460 result=40 01:51:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:51:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:51:12 Aux= 01:51:12 Message to Camera, serial 258436 queued 01:51:49 Received message from Master: op=PointingHead serial=258449 01:51:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:51:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:51:49 Point started: ret=0 01:51:49 point_skyscan result=0 01:51:50 Check angles 01:51:50 SkyScan query 01:51:51 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.235<-16549 Statuses=0009 0009 01:51:51 Msec=0 True Az=63.96 Ze=-68.235 Az status=0009 Ze status=0009 01:51:51 Check angles 01:51:51 SkyScan query 01:51:51 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.22<-17948 Statuses=0009 0009 01:51:51 Msec=750 True Az=81.33 Ze=-89.22 Az status=0009 Ze status=0009 01:51:51 Check angles 01:51:51 SkyScan query 01:51:52 SkyScan query done: ret=0 az=98.835<-6589 ze=-110.145<-19343 Statuses=0009 0009 01:51:52 Msec=1500 True Az=98.835 Ze=-110.145 Az status=0009 Ze status=0009 01:51:52 Check angles 01:51:52 SkyScan query 01:51:53 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.535<-20769 Statuses=0009 0009 01:51:53 Msec=2250 True Az=116.715 Ze=-131.535 Az status=0009 Ze status=0009 01:51:53 Check angles 01:51:53 SkyScan query 01:51:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 01:51:54 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 01:51:54 Check angles 01:51:54 SkyScan query 01:51:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 01:51:54 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 01:51:54 Message to Master queued w/err=0: serial=258449 error=0 01:51:59 Received message from Master: op=Filter serial=258450 01:51:59 Color wheel filter change from 0 to 0 01:51:59 FLIGetFilterPos err=0 currentPosition=0 01:51:59 FLIGetStepsRemaining err=0 RemainingSteps=0 01:51:59 Filter is already there-color wheel unchanged 01:52:00 Received message from Master: op=Shutter serial=258451 01:52:00 Shutter LASER close 01:52:00 Received message from Camera: op=State serial=258453 01:52:00 GetSingleValue result=40 Value=cccccccc 01:52:00 SkyScan query 01:52:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:52:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:00 Parameters OK 01:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:00 Set A/D data flow result=40 01:52:00 Set A/D channel type result=40 01:52:00 Set A/D encoding result=40 01:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:00 Set channel filter=0.000000e+000 result=40 01:52:00 Config A/D Result=40 01:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:00 Get A/D filter: -9.255963e+061 result=40 01:52:00 Get A/D value=-858993460 result=40 01:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:00 Parameters OK 01:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:00 Set A/D data flow result=40 01:52:00 Set A/D channel type result=40 01:52:00 Set A/D encoding result=40 01:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:00 Set channel filter=0.000000e+000 result=40 01:52:00 Config A/D Result=40 01:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:00 Get A/D filter: -9.255963e+061 result=40 01:52:00 Get A/D value=-858993460 result=40 01:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:52:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:52:00 Aux= 01:52:00 Message to Camera, serial 258453 queued 01:52:37 Received message from Master: op=PointingHead serial=258466 01:52:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:52:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:52:37 Point started: ret=0 01:52:37 point_skyscan result=0 01:52:38 Check angles 01:52:38 SkyScan query 01:52:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0009 0009 01:52:39 Msec=0 True Az=112.995 Ze=-170.955 Az status=0009 Ze status=0009 01:52:39 Check angles 01:52:39 SkyScan query 01:52:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:52:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:52:39 Message to Master queued w/err=0: serial=258466 error=0 01:52:44 Received message from Master: op=Filter serial=258467 01:52:44 Color wheel filter change from 0 to 0 01:52:44 FLIGetFilterPos err=0 currentPosition=0 01:52:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:52:44 Filter is already there-color wheel unchanged 01:52:45 Received message from Master: op=Shutter serial=258468 01:52:45 Shutter LASER open 01:52:45 Received message from Camera: op=State serial=258470 01:52:45 GetSingleValue result=40 Value=cccccccc 01:52:45 SkyScan query 01:52:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:52:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:45 Parameters OK 01:52:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:45 Set A/D data flow result=40 01:52:45 Set A/D channel type result=40 01:52:45 Set A/D encoding result=40 01:52:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:45 Set channel filter=0.000000e+000 result=40 01:52:45 Config A/D Result=40 01:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:45 Get A/D filter: -9.255963e+061 result=40 01:52:45 Get A/D value=-858993460 result=40 01:52:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:45 Parameters OK 01:52:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:45 Set A/D data flow result=40 01:52:45 Set A/D channel type result=40 01:52:45 Set A/D encoding result=40 01:52:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:45 Set channel filter=0.000000e+000 result=40 01:52:45 Config A/D Result=40 01:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:45 Get A/D filter: -9.255963e+061 result=40 01:52:45 Get A/D value=-858993460 result=40 01:52:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:52:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:52:45 Aux= 01:52:45 Message to Camera, serial 258470 queued 01:52:54 Received message from Master: op=Shutter serial=258480 01:52:54 Shutter LASER close 01:52:54 Received message from Master: op=PointingHead serial=258484 01:52:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:52:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:52:55 Point started: ret=0 01:52:55 point_skyscan result=0 01:52:55 Check angles 01:52:55 SkyScan query 01:52:56 SkyScan query done: ret=0 az=136.125<-9075 ze=-143.055<-21537 Statuses=0009 0009 01:52:56 Msec=0 True Az=136.125 Ze=-143.055 Az status=0009 Ze status=0009 01:52:56 Check angles 01:52:56 SkyScan query 01:52:57 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.1<-20140 Statuses=0009 0009 01:52:57 Msec=750 True Az=153.66 Ze=-122.1 Az status=0009 Ze status=0009 01:52:57 Check angles 01:52:57 SkyScan query 01:52:57 SkyScan query done: ret=0 az=171.15<-11410 ze=-101.175<-18745 Statuses=0009 0009 01:52:57 Msec=1500 True Az=171.15 Ze=-101.175 Az status=0009 Ze status=0009 01:52:58 Check angles 01:52:58 SkyScan query 01:52:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.25<-17350 Statuses=0008 0009 01:52:58 Msec=2250 True Az=176.01 Ze=-80.25 Az status=0008 Ze status=0009 01:52:58 Check angles 01:52:58 SkyScan query 01:52:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.77<-15918 Statuses=0008 0009 01:52:59 Msec=3000 True Az=176.01 Ze=-58.77 Az status=0008 Ze status=0009 01:52:59 Check angles 01:52:59 SkyScan query 01:53:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:53:00 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:53:00 Message to Master queued w/err=0: serial=258484 error=0 01:53:05 Received message from Master: op=Filter serial=258485 01:53:05 Color wheel filter change from 0 to 0 01:53:05 FLIGetFilterPos err=0 currentPosition=0 01:53:05 FLIGetStepsRemaining err=0 RemainingSteps=0 01:53:05 Filter is already there-color wheel unchanged 01:53:05 Received message from Master: op=Shutter serial=258486 01:53:05 Shutter LASER close 01:53:05 Received message from Camera: op=State serial=258488 01:53:05 GetSingleValue result=40 Value=cccccccc 01:53:05 SkyScan query 01:53:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:53:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:06 Parameters OK 01:53:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:06 Set A/D data flow result=40 01:53:06 Set A/D channel type result=40 01:53:06 Set A/D encoding result=40 01:53:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:06 Set channel filter=0.000000e+000 result=40 01:53:06 Config A/D Result=40 01:53:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:06 Get A/D filter: -9.255963e+061 result=40 01:53:06 Get A/D value=-858993460 result=40 01:53:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:06 Parameters OK 01:53:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:06 Set A/D data flow result=40 01:53:06 Set A/D channel type result=40 01:53:06 Set A/D encoding result=40 01:53:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:06 Set channel filter=0.000000e+000 result=40 01:53:06 Config A/D Result=40 01:53:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:06 Get A/D filter: -9.255963e+061 result=40 01:53:06 Get A/D value=-858993460 result=40 01:53:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:53:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:53:06 Aux= 01:53:06 Message to Camera, serial 258488 queued 01:53:43 Received message from Master: op=PointingHead serial=258501 01:53:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:53:43 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:53:43 Point started: ret=0 01:53:43 point_skyscan result=0 01:53:44 Check angles 01:53:44 SkyScan query 01:53:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.885<-13459 Statuses=0008 0009 01:53:44 Msec=0 True Az=175.995 Ze=-21.885 Az status=0008 Ze status=0009 01:53:44 Check angles 01:53:44 SkyScan query 01:53:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.525<-12035 Statuses=0008 0009 01:53:45 Msec=750 True Az=175.995 Ze=-0.525 Az status=0008 Ze status=0009 01:53:45 Check angles 01:53:45 SkyScan query 01:53:46 SkyScan query done: ret=0 az=175.995<-11733 ze=20.475<-10635 Statuses=0008 0009 01:53:46 Msec=1500 True Az=175.995 Ze=20.475 Az status=0008 Ze status=0009 01:53:46 Check angles 01:53:46 SkyScan query 01:53:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.58<-9428 Statuses=0008 0009 01:53:47 Msec=2250 True Az=175.995 Ze=38.58 Az status=0008 Ze status=0009 01:53:47 Check angles 01:53:47 SkyScan query 01:53:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 01:53:47 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 01:53:47 Message to Master queued w/err=0: serial=258501 error=0 01:53:52 Received message from Master: op=Filter serial=258502 01:53:52 Color wheel filter change from 0 to 0 01:53:52 FLIGetFilterPos err=0 currentPosition=0 01:53:52 FLIGetStepsRemaining err=0 RemainingSteps=0 01:53:52 Filter is already there-color wheel unchanged 01:53:52 Received message from Master: op=Shutter serial=258503 01:53:52 Shutter LASER close 01:53:53 Received message from Camera: op=State serial=258505 01:53:53 GetSingleValue result=40 Value=cccccccc 01:53:53 SkyScan query 01:53:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:53:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:53 Parameters OK 01:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:53 Set A/D data flow result=40 01:53:53 Set A/D channel type result=40 01:53:53 Set A/D encoding result=40 01:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:53 Set channel filter=0.000000e+000 result=40 01:53:53 Config A/D Result=40 01:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:53 Get A/D filter: -9.255963e+061 result=40 01:53:53 Get A/D value=-858993460 result=40 01:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:53 Parameters OK 01:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:53 Set A/D data flow result=40 01:53:53 Set A/D channel type result=40 01:53:53 Set A/D encoding result=40 01:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:53 Set channel filter=0.000000e+000 result=40 01:53:53 Config A/D Result=40 01:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:53 Get A/D filter: -9.255963e+061 result=40 01:53:53 Get A/D value=-858993460 result=40 01:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:53:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:53:53 Aux= 01:53:53 Message to Camera, serial 258505 queued 01:54:30 Received message from Master: op=PointingHead serial=258518 01:54:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:54:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:54:30 Point started: ret=0 01:54:30 point_skyscan result=0 01:54:31 Check angles 01:54:31 SkyScan query 01:54:32 SkyScan query done: ret=0 az=152.88<-10192 ze=8.565<-11429 Statuses=0009 0009 01:54:32 Msec=0 True Az=152.88 Ze=8.565 Az status=0009 Ze status=0009 01:54:32 Check angles 01:54:32 SkyScan query 01:54:32 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.345<-12823 Statuses=0009 0009 01:54:32 Msec=750 True Az=135.36 Ze=-12.345 Az status=0009 Ze status=0009 01:54:33 Check angles 01:54:33 SkyScan query 01:54:33 SkyScan query done: ret=0 az=117.84<-7856 ze=-33.315<-14221 Statuses=0009 0009 01:54:33 Msec=1500 True Az=117.84 Ze=-33.315 Az status=0009 Ze status=0009 01:54:33 Check angles 01:54:33 SkyScan query 01:54:34 SkyScan query done: ret=0 az=100.455<-6697 ze=-51.54<-15436 Statuses=0009 0009 01:54:34 Msec=2250 True Az=100.455 Ze=-51.54 Az status=0009 Ze status=0009 01:54:34 Check angles 01:54:34 SkyScan query 01:54:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 01:54:35 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 01:54:35 Check angles 01:54:35 SkyScan query 01:54:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:54:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:54:35 Message to Master queued w/err=0: serial=258518 error=0 01:54:40 Received message from Master: op=Filter serial=258519 01:54:40 Color wheel filter change from 0 to 0 01:54:40 FLIGetFilterPos err=0 currentPosition=0 01:54:40 FLIGetStepsRemaining err=0 RemainingSteps=0 01:54:40 Filter is already there-color wheel unchanged 01:54:41 Received message from Master: op=Shutter serial=258520 01:54:41 Shutter LASER close 01:54:41 Received message from Camera: op=State serial=258522 01:54:41 GetSingleValue result=40 Value=cccccccc 01:54:41 SkyScan query 01:54:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:54:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:41 Parameters OK 01:54:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:41 Set A/D data flow result=40 01:54:41 Set A/D channel type result=40 01:54:41 Set A/D encoding result=40 01:54:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:41 Set channel filter=0.000000e+000 result=40 01:54:41 Config A/D Result=40 01:54:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:41 Get A/D filter: -9.255963e+061 result=40 01:54:41 Get A/D value=-858993460 result=40 01:54:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:41 Parameters OK 01:54:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:41 Set A/D data flow result=40 01:54:41 Set A/D channel type result=40 01:54:41 Set A/D encoding result=40 01:54:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:41 Set channel filter=0.000000e+000 result=40 01:54:41 Config A/D Result=40 01:54:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:41 Get A/D filter: -9.255963e+061 result=40 01:54:41 Get A/D value=-858993460 result=40 01:54:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:54:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:54:41 Aux= 01:54:41 Message to Camera, serial 258522 queued 01:55:18 Received message from Master: op=PointingHead serial=258535 01:55:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:55:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:55:18 Point started: ret=0 01:55:18 point_skyscan result=0 01:55:19 Check angles 01:55:19 SkyScan query 01:55:20 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.435<-17429 Statuses=0009 0009 01:55:20 Msec=0 True Az=109.155 Ze=-81.435 Az status=0009 Ze status=0009 01:55:20 Check angles 01:55:20 SkyScan query 01:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 01:55:21 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 01:55:21 Check angles 01:55:21 SkyScan query 01:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.825<-20255 Statuses=0008 0009 01:55:21 Msec=1500 True Az=112.995 Ze=-123.825 Az status=0008 Ze status=0009 01:55:21 Check angles 01:55:21 SkyScan query 01:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 01:55:22 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 01:55:22 Check angles 01:55:22 SkyScan query 01:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.705<-23047 Statuses=0008 0009 01:55:23 Msec=3000 True Az=112.995 Ze=-165.705 Az status=0008 Ze status=0009 01:55:23 Check angles 01:55:23 SkyScan query 01:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:55:24 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:55:24 Message to Master queued w/err=0: serial=258535 error=0 01:55:29 Received message from Master: op=Filter serial=258536 01:55:29 Color wheel filter change from 0 to 0 01:55:29 FLIGetFilterPos err=0 currentPosition=0 01:55:29 FLIGetStepsRemaining err=0 RemainingSteps=0 01:55:29 Filter is already there-color wheel unchanged 01:55:29 Received message from Master: op=Shutter serial=258537 01:55:29 Shutter LASER open 01:55:29 Received message from Camera: op=State serial=258539 01:55:29 GetSingleValue result=40 Value=cccccccc 01:55:29 SkyScan query 01:55:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:55:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:30 Parameters OK 01:55:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:30 Set A/D data flow result=40 01:55:30 Set A/D channel type result=40 01:55:30 Set A/D encoding result=40 01:55:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:30 Set channel filter=0.000000e+000 result=40 01:55:30 Config A/D Result=40 01:55:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-19 01:55:30] 01:55:30 Get A/D filter: -9.255963e+061 result=40 01:55:30 Get A/D value=-858993460 result=40 01:55:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:30 Parameters OK 01:55:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:30 Set A/D data flow result=40 01:55:30 Set A/D channel type result=40 01:55:30 Set A/D encoding result=40 01:55:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:30 Set channel filter=0.000000e+000 result=40 01:55:30 Config A/D Result=40 01:55:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:30 Get A/D filter: -9.255963e+061 result=40 01:55:30 Get A/D value=-858993460 result=40 01:55:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:55:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:55:30 Aux= 01:55:30 Message to Camera, serial 258539 queued 01:55:38 Received message from Master: op=Shutter serial=258549 01:55:38 Shutter LASER close 01:55:38 Received message from Master: op=PointingHead serial=258553 01:55:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:55:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:55:39 Point started: ret=0 01:55:39 point_skyscan result=0 01:55:39 Check angles 01:55:39 SkyScan query 01:55:40 SkyScan query done: ret=0 az=89.85<-5990 ze=157.245<-1517 Statuses=0009 0009 01:55:40 Msec=0 True Az=89.85 Ze=157.245 Az status=0009 Ze status=0009 01:55:40 Check angles 01:55:40 SkyScan query 01:55:41 SkyScan query done: ret=0 az=72.48<-4832 ze=136.29<-2914 Statuses=0009 0009 01:55:41 Msec=750 True Az=72.48 Ze=136.29 Az status=0009 Ze status=0009 01:55:41 Check angles 01:55:41 SkyScan query 01:55:42 SkyScan query done: ret=0 az=54.705<-3647 ze=114.9<-4340 Statuses=0009 0009 01:55:42 Msec=1500 True Az=54.705 Ze=114.9 Az status=0009 Ze status=0009 01:55:42 Check angles 01:55:42 SkyScan query 01:55:42 SkyScan query done: ret=0 az=41.01<-2734 ze=93.54<-5764 Statuses=0009 0009 01:55:42 Msec=2250 True Az=41.01 Ze=93.54 Az status=0009 Ze status=0009 01:55:42 Check angles 01:55:42 SkyScan query 01:55:43 SkyScan query done: ret=0 az=40.995<-2733 ze=72.525<-7165 Statuses=0008 0009 01:55:43 Msec=3000 True Az=40.995 Ze=72.525 Az status=0008 Ze status=0009 01:55:43 Check angles 01:55:43 SkyScan query 01:55:44 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 01:55:44 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 01:55:44 Check angles 01:55:44 SkyScan query 01:55:45 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 01:55:45 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 01:55:45 Message to Master queued w/err=0: serial=258553 error=0 01:55:50 Received message from Master: op=Filter serial=258554 01:55:50 Color wheel filter change from 0 to 0 01:55:50 FLIGetFilterPos err=0 currentPosition=0 01:55:50 FLIGetStepsRemaining err=0 RemainingSteps=0 01:55:50 Filter is already there-color wheel unchanged 01:55:50 Received message from Master: op=Shutter serial=258555 01:55:50 Shutter LASER close 01:55:50 Received message from Camera: op=State serial=258557 01:55:50 GetSingleValue result=40 Value=cccccccc 01:55:50 SkyScan query 01:55:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:55:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:50 Parameters OK 01:55:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:50 Set A/D data flow result=40 01:55:50 Set A/D channel type result=40 01:55:50 Set A/D encoding result=40 01:55:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:50 Set channel filter=0.000000e+000 result=40 01:55:50 Config A/D Result=40 01:55:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:50 Get A/D filter: -9.255963e+061 result=40 01:55:50 Get A/D value=-858993460 result=40 01:55:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:50 Parameters OK 01:55:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:50 Set A/D data flow result=40 01:55:50 Set A/D channel type result=40 01:55:50 Set A/D encoding result=40 01:55:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:50 Set channel filter=0.000000e+000 result=40 01:55:50 Config A/D Result=40 01:55:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:50 Get A/D filter: -9.255963e+061 result=40 01:55:50 Get A/D value=-858993460 result=40 01:55:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:55:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:55:50 Aux= 01:55:50 Message to Camera, serial 258557 queued [UTC 2018-12-19 01:55:52] 01:56:27 Received message from Master: op=PointingHead serial=258570 01:56:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:56:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:56:28 Point started: ret=0 01:56:28 point_skyscan result=0 01:56:28 Check angles 01:56:28 SkyScan query 01:56:29 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 01:56:29 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 01:56:29 Check angles 01:56:29 SkyScan query 01:56:30 SkyScan query done: ret=0 az=81.6<-5440 ze=66.495<-7567 Statuses=0009 0008 01:56:30 Msec=750 True Az=81.6 Ze=66.495 Az status=0009 Ze status=0008 01:56:30 Check angles 01:56:30 SkyScan query 01:56:30 SkyScan query done: ret=0 az=99.255<-6617 ze=66.495<-7567 Statuses=0009 0008 01:56:30 Msec=1500 True Az=99.255 Ze=66.495 Az status=0009 Ze status=0008 01:56:31 Check angles 01:56:31 SkyScan query 01:56:31 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 01:56:31 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 01:56:31 Check angles 01:56:31 SkyScan query 01:56:32 SkyScan query done: ret=0 az=134.535<-8969 ze=66.495<-7567 Statuses=0009 0008 01:56:32 Msec=3000 True Az=134.535 Ze=66.495 Az status=0009 Ze status=0008 01:56:32 Check angles 01:56:32 SkyScan query 01:56:33 SkyScan query done: ret=0 az=151.815<-10121 ze=66.495<-7567 Statuses=0009 0008 01:56:33 Msec=3750 True Az=151.815 Ze=66.495 Az status=0009 Ze status=0008 01:56:33 Check angles 01:56:33 SkyScan query 01:56:34 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:56:34 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:56:34 Message to Master queued w/err=0: serial=258570 error=0 01:56:39 Received message from Master: op=Filter serial=258571 01:56:39 Color wheel filter change from 0 to 0 01:56:39 FLIGetFilterPos err=0 currentPosition=0 01:56:39 FLIGetStepsRemaining err=0 RemainingSteps=0 01:56:39 Filter is already there-color wheel unchanged 01:56:39 Received message from Master: op=Shutter serial=258572 01:56:39 Shutter LASER close 01:56:39 Received message from Camera: op=State serial=258574 01:56:39 GetSingleValue result=40 Value=cccccccc 01:56:39 SkyScan query 01:56:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:56:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:39 Parameters OK 01:56:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:39 Set A/D data flow result=40 01:56:39 Set A/D channel type result=40 01:56:39 Set A/D encoding result=40 01:56:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:39 Set channel filter=0.000000e+000 result=40 01:56:39 Config A/D Result=40 01:56:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:39 Get A/D filter: -9.255963e+061 result=40 01:56:39 Get A/D value=-858993460 result=40 01:56:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:39 Parameters OK 01:56:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:39 Set A/D data flow result=40 01:56:39 Set A/D channel type result=40 01:56:39 Set A/D encoding result=40 01:56:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:39 Set channel filter=0.000000e+000 result=40 01:56:39 Config A/D Result=40 01:56:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:39 Get A/D filter: -9.255963e+061 result=40 01:56:39 Get A/D value=-858993460 result=40 01:56:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:56:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:56:39 Aux= 01:56:39 Message to Camera, serial 258574 queued 01:57:16 Received message from Master: op=PointingHead serial=258587 01:57:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:57:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:57:16 Point started: ret=0 01:57:16 point_skyscan result=0 01:57:17 Check angles 01:57:17 SkyScan query 01:57:18 SkyScan query done: ret=0 az=135.045<-9003 ze=36.765<-9549 Statuses=0009 0009 01:57:18 Msec=0 True Az=135.045 Ze=36.765 Az status=0009 Ze status=0009 01:57:18 Check angles 01:57:18 SkyScan query 01:57:19 SkyScan query done: ret=0 az=117.63<-7842 ze=15.825<-10945 Statuses=0009 0009 01:57:19 Msec=750 True Az=117.63 Ze=15.825 Az status=0009 Ze status=0009 01:57:19 Check angles 01:57:19 SkyScan query 01:57:19 SkyScan query done: ret=0 az=100.245<-6683 ze=-5.145<-12343 Statuses=0009 0009 01:57:19 Msec=1500 True Az=100.245 Ze=-5.145 Az status=0009 Ze status=0009 01:57:19 Check angles 01:57:19 SkyScan query 01:57:20 SkyScan query done: ret=0 az=82.695<-5513 ze=-26.1<-13740 Statuses=0009 0009 01:57:20 Msec=2250 True Az=82.695 Ze=-26.1 Az status=0009 Ze status=0009 01:57:20 Check angles 01:57:20 SkyScan query 01:57:21 SkyScan query done: ret=0 az=65.235<-4349 ze=-38.58<-14572 Statuses=0009 0008 01:57:21 Msec=3000 True Az=65.235 Ze=-38.58 Az status=0009 Ze status=0008 01:57:21 Check angles 01:57:21 SkyScan query 01:57:22 SkyScan query done: ret=0 az=47.745<-3183 ze=-38.52<-14568 Statuses=0009 0008 01:57:22 Msec=3750 True Az=47.745 Ze=-38.52 Az status=0009 Ze status=0008 01:57:22 Check angles 01:57:22 SkyScan query 01:57:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:57:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:57:22 Message to Master queued w/err=0: serial=258587 error=0 01:57:27 Received message from Master: op=Filter serial=258588 01:57:27 Color wheel filter change from 0 to 0 01:57:27 FLIGetFilterPos err=0 currentPosition=0 01:57:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:57:27 Filter is already there-color wheel unchanged 01:57:27 Received message from Master: op=Shutter serial=258589 01:57:27 Shutter LASER close 01:57:28 Received message from Camera: op=State serial=258591 01:57:28 GetSingleValue result=40 Value=cccccccc 01:57:28 SkyScan query 01:57:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:57:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:28 Parameters OK 01:57:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:28 Set A/D data flow result=40 01:57:28 Set A/D channel type result=40 01:57:28 Set A/D encoding result=40 01:57:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:28 Set channel filter=0.000000e+000 result=40 01:57:28 Config A/D Result=40 01:57:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:28 Get A/D filter: -9.255963e+061 result=40 01:57:28 Get A/D value=-858993460 result=40 01:57:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:28 Parameters OK 01:57:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:28 Set A/D data flow result=40 01:57:28 Set A/D channel type result=40 01:57:28 Set A/D encoding result=40 01:57:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:28 Set channel filter=0.000000e+000 result=40 01:57:28 Config A/D Result=40 01:57:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:28 Get A/D filter: -9.255963e+061 result=40 01:57:28 Get A/D value=-858993460 result=40 01:57:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:57:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:57:28 Aux= 01:57:28 Message to Camera, serial 258591 queued 01:58:05 Received message from Master: op=PointingHead serial=258604 01:58:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:58:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:58:05 Point started: ret=0 01:58:05 point_skyscan result=0 01:58:06 Check angles 01:58:06 SkyScan query 01:58:07 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.205<-16547 Statuses=0009 0009 01:58:07 Msec=0 True Az=63.96 Ze=-68.205 Az status=0009 Ze status=0009 01:58:07 Check angles 01:58:07 SkyScan query 01:58:07 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.235<-17949 Statuses=0009 0009 01:58:07 Msec=750 True Az=81.36 Ze=-89.235 Az status=0009 Ze status=0009 01:58:08 Check angles 01:58:08 SkyScan query 01:58:08 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.115<-19341 Statuses=0009 0009 01:58:08 Msec=1500 True Az=98.895 Ze=-110.115 Az status=0009 Ze status=0009 01:58:08 Check angles 01:58:08 SkyScan query 01:58:09 SkyScan query done: ret=0 az=116.28<-7752 ze=-131.085<-20739 Statuses=0009 0009 01:58:09 Msec=2250 True Az=116.28 Ze=-131.085 Az status=0009 Ze status=0009 01:58:09 Check angles 01:58:09 SkyScan query 01:58:10 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 01:58:10 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 01:58:10 Check angles 01:58:10 SkyScan query 01:58:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 01:58:10 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 01:58:10 Message to Master queued w/err=0: serial=258604 error=0 01:58:15 Received message from Master: op=Filter serial=258605 01:58:15 Color wheel filter change from 0 to 0 01:58:15 FLIGetFilterPos err=0 currentPosition=0 01:58:15 FLIGetStepsRemaining err=0 RemainingSteps=0 01:58:15 Filter is already there-color wheel unchanged 01:58:16 Received message from Master: op=Shutter serial=258606 01:58:16 Shutter LASER close 01:58:16 Received message from Camera: op=State serial=258608 01:58:16 GetSingleValue result=40 Value=cccccccc 01:58:16 SkyScan query 01:58:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:58:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:16 Parameters OK 01:58:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:16 Set A/D data flow result=40 01:58:16 Set A/D channel type result=40 01:58:16 Set A/D encoding result=40 01:58:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:16 Set channel filter=0.000000e+000 result=40 01:58:16 Config A/D Result=40 01:58:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:16 Get A/D filter: -9.255963e+061 result=40 01:58:16 Get A/D value=-858993460 result=40 01:58:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:16 Parameters OK 01:58:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:16 Set A/D data flow result=40 01:58:16 Set A/D channel type result=40 01:58:16 Set A/D encoding result=40 01:58:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:16 Set channel filter=0.000000e+000 result=40 01:58:16 Config A/D Result=40 01:58:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:16 Get A/D filter: -9.255963e+061 result=40 01:58:16 Get A/D value=-858993460 result=40 01:58:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:58:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:58:16 Aux= 01:58:16 Message to Camera, serial 258608 queued 01:58:53 Received message from Master: op=PointingHead serial=258621 01:58:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:58:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:58:53 Point started: ret=0 01:58:53 point_skyscan result=0 01:58:54 Check angles 01:58:54 SkyScan query 01:58:55 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.45<-23430 Statuses=0009 0009 01:58:55 Msec=0 True Az=113.01 Ze=-171.45 Az status=0009 Ze status=0009 01:58:55 Check angles 01:58:55 SkyScan query 01:58:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:58:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:58:55 Message to Master queued w/err=0: serial=258621 error=0 01:59:00 Received message from Master: op=Filter serial=258622 01:59:00 Color wheel filter change from 0 to 0 01:59:00 FLIGetFilterPos err=0 currentPosition=0 01:59:00 FLIGetStepsRemaining err=0 RemainingSteps=0 01:59:00 Filter is already there-color wheel unchanged 01:59:01 Received message from Master: op=Shutter serial=258623 01:59:01 Shutter LASER open 01:59:01 Received message from Camera: op=State serial=258625 01:59:01 GetSingleValue result=40 Value=cccccccc 01:59:01 SkyScan query 01:59:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:59:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:01 Parameters OK 01:59:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:01 Set A/D data flow result=40 01:59:01 Set A/D channel type result=40 01:59:01 Set A/D encoding result=40 01:59:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:01 Set channel filter=0.000000e+000 result=40 01:59:01 Config A/D Result=40 01:59:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:01 Get A/D filter: -9.255963e+061 result=40 01:59:01 Get A/D value=-858993460 result=40 01:59:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:01 Parameters OK 01:59:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:01 Set A/D data flow result=40 01:59:01 Set A/D channel type result=40 01:59:01 Set A/D encoding result=40 01:59:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:01 Set channel filter=0.000000e+000 result=40 01:59:01 Config A/D Result=40 01:59:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:01 Get A/D filter: -9.255963e+061 result=40 01:59:01 Get A/D value=-858993460 result=40 01:59:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:59:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:59:01 Aux= 01:59:01 Message to Camera, serial 258625 queued 01:59:10 Received message from Master: op=Shutter serial=258635 01:59:10 Shutter LASER close 01:59:10 Received message from Master: op=PointingHead serial=258639 01:59:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:59:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:59:11 Point started: ret=0 01:59:11 point_skyscan result=0 01:59:11 Check angles 01:59:11 SkyScan query 01:59:12 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.385<-21559 Statuses=0009 0009 01:59:12 Msec=0 True Az=135.84 Ze=-143.385 Az status=0009 Ze status=0009 01:59:12 Check angles 01:59:12 SkyScan query 01:59:13 SkyScan query done: ret=0 az=153.285<-10219 ze=-122.4<-20160 Statuses=0009 0009 01:59:13 Msec=750 True Az=153.285 Ze=-122.4 Az status=0009 Ze status=0009 01:59:13 Check angles 01:59:13 SkyScan query 01:59:14 SkyScan query done: ret=0 az=171.15<-11410 ze=-100.995<-18733 Statuses=0009 0009 01:59:14 Msec=1500 True Az=171.15 Ze=-100.995 Az status=0009 Ze status=0009 01:59:14 Check angles 01:59:14 SkyScan query 01:59:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.115<-17341 Statuses=0008 0009 01:59:14 Msec=2250 True Az=176.01 Ze=-80.115 Az status=0008 Ze status=0009 01:59:14 Check angles 01:59:14 SkyScan query 01:59:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.16<-15944 Statuses=0008 0009 01:59:15 Msec=3000 True Az=176.01 Ze=-59.16 Az status=0008 Ze status=0009 01:59:15 Check angles 01:59:15 SkyScan query 01:59:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 01:59:16 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 01:59:16 Message to Master queued w/err=0: serial=258639 error=0 01:59:21 Received message from Master: op=Filter serial=258640 01:59:21 Color wheel filter change from 0 to 0 01:59:21 FLIGetFilterPos err=0 currentPosition=0 01:59:21 FLIGetStepsRemaining err=0 RemainingSteps=0 01:59:21 Filter is already there-color wheel unchanged 01:59:21 Received message from Master: op=Shutter serial=258641 01:59:21 Shutter LASER close 01:59:21 Received message from Camera: op=State serial=258643 01:59:21 GetSingleValue result=40 Value=cccccccc 01:59:21 SkyScan query 01:59:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:59:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:22 Parameters OK 01:59:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:22 Set A/D data flow result=40 01:59:22 Set A/D channel type result=40 01:59:22 Set A/D encoding result=40 01:59:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:22 Set channel filter=0.000000e+000 result=40 01:59:22 Config A/D Result=40 01:59:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:22 Get A/D filter: -9.255963e+061 result=40 01:59:22 Get A/D value=-858993460 result=40 01:59:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:22 Parameters OK 01:59:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:22 Set A/D data flow result=40 01:59:22 Set A/D channel type result=40 01:59:22 Set A/D encoding result=40 01:59:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:22 Set channel filter=0.000000e+000 result=40 01:59:22 Config A/D Result=40 01:59:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:22 Get A/D filter: -9.255963e+061 result=40 01:59:22 Get A/D value=-858993460 result=40 01:59:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:59:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:59:22 Aux= 01:59:22 Message to Camera, serial 258643 queued 01:59:59 Received message from Master: op=PointingHead serial=258656 01:59:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:59:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:59:59 Point started: ret=0 01:59:59 point_skyscan result=0 02:00:00 Check angles 02:00:00 SkyScan query 02:00:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.66<-13444 Statuses=0008 0009 02:00:01 Msec=0 True Az=175.995 Ze=-21.66 Az status=0008 Ze status=0009 02:00:01 Check angles 02:00:01 SkyScan query 02:00:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.705<-12047 Statuses=0008 0009 02:00:01 Msec=750 True Az=175.995 Ze=-0.705 Az status=0008 Ze status=0009 02:00:01 Check angles 02:00:01 SkyScan query 02:00:02 SkyScan query done: ret=0 az=175.995<-11733 ze=20.325<-10645 Statuses=0008 0009 02:00:02 Msec=1500 True Az=175.995 Ze=20.325 Az status=0008 Ze status=0009 02:00:02 Check angles 02:00:02 SkyScan query 02:00:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.565<-9429 Statuses=0008 0009 02:00:03 Msec=2250 True Az=175.995 Ze=38.565 Az status=0008 Ze status=0009 02:00:03 Check angles 02:00:03 SkyScan query 02:00:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.55<-9430 Statuses=0008 0008 02:00:04 Msec=3000 True Az=175.995 Ze=38.55 Az status=0008 Ze status=0008 02:00:04 Message to Master queued w/err=0: serial=258656 error=0 02:00:09 Received message from Master: op=Filter serial=258657 02:00:09 Color wheel filter change from 0 to 0 02:00:09 FLIGetFilterPos err=0 currentPosition=0 02:00:09 FLIGetStepsRemaining err=0 RemainingSteps=0 02:00:09 Filter is already there-color wheel unchanged 02:00:09 Received message from Master: op=Shutter serial=258658 02:00:09 Shutter LASER close 02:00:09 Received message from Camera: op=State serial=258660 02:00:09 GetSingleValue result=40 Value=cccccccc 02:00:09 SkyScan query 02:00:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:00:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:09 Parameters OK 02:00:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:09 Set A/D data flow result=40 02:00:09 Set A/D channel type result=40 02:00:09 Set A/D encoding result=40 02:00:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:09 Set channel filter=0.000000e+000 result=40 02:00:09 Config A/D Result=40 02:00:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:09 Get A/D filter: -9.255963e+061 result=40 02:00:09 Get A/D value=-858993460 result=40 02:00:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:09 Parameters OK 02:00:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:09 Set A/D data flow result=40 02:00:09 Set A/D channel type result=40 02:00:09 Set A/D encoding result=40 02:00:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:09 Set channel filter=0.000000e+000 result=40 02:00:09 Config A/D Result=40 02:00:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:09 Get A/D filter: -9.255963e+061 result=40 02:00:09 Get A/D value=-858993460 result=40 02:00:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:00:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:00:09 Aux= 02:00:09 Message to Camera, serial 258660 queued 02:00:46 Received message from Master: op=PointingHead serial=258673 02:00:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:00:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:00:47 Point started: ret=0 02:00:47 point_skyscan result=0 02:00:47 Check angles 02:00:47 SkyScan query 02:00:48 SkyScan query done: ret=0 az=152.91<-10194 ze=8.64<-11424 Statuses=0009 0009 02:00:48 Msec=0 True Az=152.91 Ze=8.64 Az status=0009 Ze status=0009 02:00:48 Check angles 02:00:48 SkyScan query 02:00:49 SkyScan query done: ret=0 az=135.495<-9033 ze=-12.27<-12818 Statuses=0009 0009 02:00:49 Msec=750 True Az=135.495 Ze=-12.27 Az status=0009 Ze status=0009 02:00:49 Check angles 02:00:49 SkyScan query 02:00:49 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.24<-14216 Statuses=0009 0009 02:00:49 Msec=1500 True Az=118.005 Ze=-33.24 Az status=0009 Ze status=0009 02:00:50 Check angles 02:00:50 SkyScan query 02:00:50 SkyScan query done: ret=0 az=100.665<-6711 ze=-51.54<-15436 Statuses=0009 0009 02:00:50 Msec=2250 True Az=100.665 Ze=-51.54 Az status=0009 Ze status=0009 02:00:50 Check angles 02:00:50 SkyScan query 02:00:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 02:00:51 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 02:00:51 Check angles 02:00:51 SkyScan query 02:00:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:00:52 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:00:52 Message to Master queued w/err=0: serial=258673 error=0 02:00:57 Received message from Master: op=Filter serial=258674 02:00:57 Color wheel filter change from 0 to 0 02:00:57 FLIGetFilterPos err=0 currentPosition=0 02:00:57 FLIGetStepsRemaining err=0 RemainingSteps=0 02:00:57 Filter is already there-color wheel unchanged 02:00:57 Received message from Master: op=Shutter serial=258675 02:00:57 Shutter LASER close 02:00:57 Received message from Camera: op=State serial=258677 02:00:57 GetSingleValue result=40 Value=cccccccc 02:00:57 SkyScan query 02:00:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:00:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:57 Parameters OK 02:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:57 Set A/D data flow result=40 02:00:57 Set A/D channel type result=40 02:00:57 Set A/D encoding result=40 02:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:57 Set channel filter=0.000000e+000 result=40 02:00:57 Config A/D Result=40 02:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:57 Get A/D filter: -9.255963e+061 result=40 02:00:57 Get A/D value=-858993460 result=40 02:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:57 Parameters OK 02:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:57 Set A/D data flow result=40 02:00:57 Set A/D channel type result=40 02:00:57 Set A/D encoding result=40 02:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:57 Set channel filter=0.000000e+000 result=40 02:00:57 Config A/D Result=40 02:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:57 Get A/D filter: -9.255963e+061 result=40 02:00:57 Get A/D value=-858993460 result=40 02:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:00:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:00:57 Aux= 02:00:57 Message to Camera, serial 258677 queued 02:01:34 Received message from Master: op=PointingHead serial=258690 02:01:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:01:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:01:35 Point started: ret=0 02:01:35 point_skyscan result=0 02:01:35 Check angles 02:01:35 SkyScan query 02:01:36 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.315<-17421 Statuses=0009 0009 02:01:36 Msec=0 True Az=109.02 Ze=-81.315 Az status=0009 Ze status=0009 02:01:36 Check angles 02:01:36 SkyScan query 02:01:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 02:01:37 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 02:01:37 Check angles 02:01:37 SkyScan query 02:01:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 02:01:37 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 02:01:38 Check angles 02:01:38 SkyScan query 02:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 02:01:38 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 02:01:38 Check angles 02:01:38 SkyScan query 02:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.15<-23010 Statuses=0008 0009 02:01:39 Msec=3000 True Az=112.995 Ze=-165.15 Az status=0008 Ze status=0009 02:01:39 Check angles 02:01:39 SkyScan query 02:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:01:40 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:01:40 Message to Master queued w/err=0: serial=258690 error=0 02:01:45 Received message from Master: op=Filter serial=258691 02:01:45 Color wheel filter change from 0 to 0 02:01:45 FLIGetFilterPos err=0 currentPosition=0 02:01:45 FLIGetStepsRemaining err=0 RemainingSteps=0 02:01:45 Filter is already there-color wheel unchanged 02:01:45 Received message from Master: op=Shutter serial=258692 02:01:45 Shutter LASER open 02:01:45 Received message from Camera: op=State serial=258694 02:01:45 GetSingleValue result=40 Value=cccccccc 02:01:45 SkyScan query 02:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:01:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:46 Parameters OK 02:01:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:46 Set A/D data flow result=40 02:01:46 Set A/D channel type result=40 02:01:46 Set A/D encoding result=40 02:01:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:46 Set channel filter=0.000000e+000 result=40 02:01:46 Config A/D Result=40 02:01:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:46 Get A/D filter: -9.255963e+061 result=40 02:01:46 Get A/D value=-858993460 result=40 02:01:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:46 Parameters OK 02:01:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:46 Set A/D data flow result=40 02:01:46 Set A/D channel type result=40 02:01:46 Set A/D encoding result=40 02:01:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:46 Set channel filter=0.000000e+000 result=40 02:01:46 Config A/D Result=40 02:01:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:46 Get A/D filter: -9.255963e+061 result=40 02:01:46 Get A/D value=-858993460 result=40 02:01:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:01:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:01:46 Aux= 02:01:46 Message to Camera, serial 258694 queued 02:01:54 Received message from Master: op=Shutter serial=258704 02:01:54 Shutter LASER close 02:01:54 Received message from Master: op=PointingHead serial=258708 02:01:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:01:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:01:55 Point started: ret=0 02:01:55 point_skyscan result=0 02:01:56 Check angles 02:01:56 SkyScan query 02:01:56 SkyScan query done: ret=0 az=89.85<-5990 ze=157.26<-1516 Statuses=0009 0009 02:01:56 Msec=0 True Az=89.85 Ze=157.26 Az status=0009 Ze status=0009 02:01:56 Check angles 02:01:56 SkyScan query 02:01:57 SkyScan query done: ret=0 az=72.495<-4833 ze=136.305<-2913 Statuses=0009 0009 02:01:57 Msec=750 True Az=72.495 Ze=136.305 Az status=0009 Ze status=0009 02:01:57 Check angles 02:01:57 SkyScan query 02:01:58 SkyScan query done: ret=0 az=55.095<-3673 ze=115.395<-4307 Statuses=0009 0009 02:01:58 Msec=1500 True Az=55.095 Ze=115.395 Az status=0009 Ze status=0009 02:01:58 Check angles 02:01:58 SkyScan query 02:01:58 SkyScan query done: ret=0 az=41.01<-2734 ze=94.38<-5708 Statuses=0009 0009 02:01:58 Msec=2250 True Az=41.01 Ze=94.38 Az status=0009 Ze status=0009 02:01:59 Check angles 02:01:59 SkyScan query 02:01:59 SkyScan query done: ret=0 az=40.995<-2733 ze=73.44<-7104 Statuses=0008 0009 02:01:59 Msec=3000 True Az=40.995 Ze=73.44 Az status=0008 Ze status=0009 02:01:59 Check angles 02:01:59 SkyScan query 02:02:00 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 02:02:00 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 02:02:00 Check angles 02:02:00 SkyScan query 02:02:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:02:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:02:01 Message to Master queued w/err=0: serial=258708 error=0 02:02:06 Received message from Master: op=Filter serial=258709 02:02:06 Color wheel filter change from 0 to 0 02:02:06 FLIGetFilterPos err=0 currentPosition=0 02:02:06 FLIGetStepsRemaining err=0 RemainingSteps=0 02:02:06 Filter is already there-color wheel unchanged 02:02:06 Received message from Master: op=Shutter serial=258710 02:02:06 Shutter LASER close 02:02:06 Received message from Camera: op=State serial=258712 02:02:06 GetSingleValue result=40 Value=cccccccc 02:02:06 SkyScan query 02:02:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:02:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:07 Parameters OK 02:02:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:07 Set A/D data flow result=40 02:02:07 Set A/D channel type result=40 02:02:07 Set A/D encoding result=40 02:02:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:07 Set channel filter=0.000000e+000 result=40 02:02:07 Config A/D Result=40 02:02:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:07 Get A/D filter: -9.255963e+061 result=40 02:02:07 Get A/D value=-858993460 result=40 02:02:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:07 Parameters OK 02:02:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:07 Set A/D data flow result=40 02:02:07 Set A/D channel type result=40 02:02:07 Set A/D encoding result=40 02:02:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:07 Set channel filter=0.000000e+000 result=40 02:02:07 Config A/D Result=40 02:02:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:07 Get A/D filter: -9.255963e+061 result=40 02:02:07 Get A/D value=-858993460 result=40 02:02:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:02:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:02:07 Aux= 02:02:07 Message to Camera, serial 258712 queued 02:02:43 Received message from Master: op=PointingHead serial=258725 02:02:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:02:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:02:44 Point started: ret=0 02:02:44 point_skyscan result=0 02:02:44 Check angles 02:02:44 SkyScan query 02:02:45 SkyScan query done: ret=0 az=64.2<-4280 ze=66.54<-7564 Statuses=0009 0008 02:02:45 Msec=0 True Az=64.2 Ze=66.54 Az status=0009 Ze status=0008 02:02:45 Check angles 02:02:45 SkyScan query 02:02:46 SkyScan query done: ret=0 az=81.675<-5445 ze=66.51<-7566 Statuses=0009 0008 02:02:46 Msec=750 True Az=81.675 Ze=66.51 Az status=0009 Ze status=0008 02:02:46 Check angles 02:02:46 SkyScan query 02:02:47 SkyScan query done: ret=0 az=99.18<-6612 ze=66.495<-7567 Statuses=0009 0008 02:02:47 Msec=1500 True Az=99.18 Ze=66.495 Az status=0009 Ze status=0008 02:02:47 Check angles 02:02:47 SkyScan query 02:02:47 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 02:02:47 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 02:02:47 Check angles 02:02:47 SkyScan query 02:02:48 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 02:02:48 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 02:02:48 Check angles 02:02:48 SkyScan query 02:02:49 SkyScan query done: ret=0 az=151.56<-10104 ze=66.495<-7567 Statuses=0009 0008 02:02:49 Msec=3750 True Az=151.56 Ze=66.495 Az status=0009 Ze status=0008 02:02:49 Check angles 02:02:49 SkyScan query 02:02:50 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:02:50 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:02:50 Message to Master queued w/err=0: serial=258725 error=0 02:02:55 Received message from Master: op=Filter serial=258726 02:02:55 Color wheel filter change from 0 to 0 02:02:55 FLIGetFilterPos err=0 currentPosition=0 02:02:55 FLIGetStepsRemaining err=0 RemainingSteps=0 02:02:55 Filter is already there-color wheel unchanged 02:02:55 Received message from Master: op=Shutter serial=258727 02:02:55 Shutter LASER close 02:02:55 Received message from Camera: op=State serial=258729 02:02:55 GetSingleValue result=40 Value=cccccccc 02:02:55 SkyScan query 02:02:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:02:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:55 Parameters OK 02:02:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:55 Set A/D data flow result=40 02:02:55 Set A/D channel type result=40 02:02:55 Set A/D encoding result=40 02:02:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:55 Set channel filter=0.000000e+000 result=40 02:02:55 Config A/D Result=40 02:02:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:55 Get A/D filter: -9.255963e+061 result=40 02:02:55 Get A/D value=-858993460 result=40 02:02:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:55 Parameters OK 02:02:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:55 Set A/D data flow result=40 02:02:55 Set A/D channel type result=40 02:02:55 Set A/D encoding result=40 02:02:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:55 Set channel filter=0.000000e+000 result=40 02:02:55 Config A/D Result=40 02:02:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:55 Get A/D filter: -9.255963e+061 result=40 02:02:55 Get A/D value=-858993460 result=40 02:02:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:02:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:02:55 Aux= 02:02:55 Message to Camera, serial 258729 queued 02:03:32 Received message from Master: op=PointingHead serial=258742 02:03:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:03:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:03:33 Point started: ret=0 02:03:33 point_skyscan result=0 02:03:33 Check angles 02:03:33 SkyScan query 02:03:34 SkyScan query done: ret=0 az=134.82<-8988 ze=36.555<-9563 Statuses=0009 0009 02:03:34 Msec=0 True Az=134.82 Ze=36.555 Az status=0009 Ze status=0009 02:03:34 Check angles 02:03:34 SkyScan query 02:03:35 SkyScan query done: ret=0 az=117.345<-7823 ze=15.615<-10959 Statuses=0009 0009 02:03:35 Msec=750 True Az=117.345 Ze=15.615 Az status=0009 Ze status=0009 02:03:35 Check angles 02:03:35 SkyScan query 02:03:35 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.37<-12358 Statuses=0009 0009 02:03:35 Msec=1500 True Az=99.975 Ze=-5.37 Az status=0009 Ze status=0009 02:03:36 Check angles 02:03:36 SkyScan query 02:03:36 SkyScan query done: ret=0 az=82.47<-5498 ze=-26.325<-13755 Statuses=0009 0009 02:03:36 Msec=2250 True Az=82.47 Ze=-26.325 Az status=0009 Ze status=0009 02:03:36 Check angles 02:03:36 SkyScan query 02:03:37 SkyScan query done: ret=0 az=64.935<-4329 ze=-38.58<-14572 Statuses=0009 0008 02:03:37 Msec=3000 True Az=64.935 Ze=-38.58 Az status=0009 Ze status=0008 02:03:37 Check angles 02:03:37 SkyScan query 02:03:38 SkyScan query done: ret=0 az=47.505<-3167 ze=-38.52<-14568 Statuses=0009 0008 02:03:38 Msec=3750 True Az=47.505 Ze=-38.52 Az status=0009 Ze status=0008 02:03:38 Check angles 02:03:38 SkyScan query 02:03:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:03:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:03:38 Message to Master queued w/err=0: serial=258742 error=0 02:03:43 Received message from Master: op=Filter serial=258743 02:03:43 Color wheel filter change from 0 to 0 02:03:43 FLIGetFilterPos err=0 currentPosition=0 02:03:43 FLIGetStepsRemaining err=0 RemainingSteps=0 02:03:43 Filter is already there-color wheel unchanged 02:03:44 Received message from Master: op=Shutter serial=258744 02:03:44 Shutter LASER close 02:03:44 Received message from Camera: op=State serial=258746 02:03:44 GetSingleValue result=40 Value=cccccccc 02:03:44 SkyScan query 02:03:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:03:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:44 Parameters OK 02:03:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:44 Set A/D data flow result=40 02:03:44 Set A/D channel type result=40 02:03:44 Set A/D encoding result=40 02:03:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:44 Set channel filter=0.000000e+000 result=40 02:03:44 Config A/D Result=40 02:03:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:44 Get A/D filter: -9.255963e+061 result=40 02:03:44 Get A/D value=-858993460 result=40 02:03:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:44 Parameters OK 02:03:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:44 Set A/D data flow result=40 02:03:44 Set A/D channel type result=40 02:03:44 Set A/D encoding result=40 02:03:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:44 Set channel filter=0.000000e+000 result=40 02:03:44 Config A/D Result=40 02:03:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:44 Get A/D filter: -9.255963e+061 result=40 02:03:44 Get A/D value=-858993460 result=40 02:03:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:03:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:03:44 Aux= 02:03:44 Message to Camera, serial 258746 queued 02:04:21 Received message from Master: op=PointingHead serial=258759 02:04:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:04:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:04:21 Point started: ret=0 02:04:21 point_skyscan result=0 02:04:22 Check angles 02:04:22 SkyScan query 02:04:23 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.58<-16572 Statuses=0009 0009 02:04:23 Msec=0 True Az=64.185 Ze=-68.58 Az status=0009 Ze status=0009 02:04:23 Check angles 02:04:23 SkyScan query 02:04:24 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.55<-17970 Statuses=0009 0009 02:04:24 Msec=750 True Az=81.6 Ze=-89.55 Az status=0009 Ze status=0009 02:04:24 Check angles 02:04:24 SkyScan query 02:04:24 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.505<-19367 Statuses=0009 0009 02:04:24 Msec=1500 True Az=99.165 Ze=-110.505 Az status=0009 Ze status=0009 02:04:24 Check angles 02:04:24 SkyScan query 02:04:25 SkyScan query done: ret=0 az=116.58<-7772 ze=-131.505<-20767 Statuses=0009 0009 02:04:25 Msec=2250 True Az=116.58 Ze=-131.505 Az status=0009 Ze status=0009 02:04:25 Check angles 02:04:25 SkyScan query 02:04:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 02:04:26 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 02:04:26 Check angles 02:04:26 SkyScan query 02:04:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:04:27 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:04:27 Message to Master queued w/err=0: serial=258759 error=0 02:04:32 Received message from Master: op=Filter serial=258760 02:04:32 Color wheel filter change from 0 to 0 02:04:32 FLIGetFilterPos err=0 currentPosition=0 02:04:32 FLIGetStepsRemaining err=0 RemainingSteps=0 02:04:32 Filter is already there-color wheel unchanged 02:04:32 Received message from Master: op=Shutter serial=258761 02:04:32 Shutter LASER close 02:04:32 Received message from Camera: op=State serial=258763 02:04:32 GetSingleValue result=40 Value=cccccccc 02:04:32 SkyScan query 02:04:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:04:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:32 Parameters OK 02:04:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:32 Set A/D data flow result=40 02:04:32 Set A/D channel type result=40 02:04:32 Set A/D encoding result=40 02:04:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:32 Set channel filter=0.000000e+000 result=40 02:04:32 Config A/D Result=40 02:04:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:32 Get A/D filter: -9.255963e+061 result=40 02:04:32 Get A/D value=-858993460 result=40 02:04:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:32 Parameters OK 02:04:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:32 Set A/D data flow result=40 02:04:32 Set A/D channel type result=40 02:04:32 Set A/D encoding result=40 02:04:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:32 Set channel filter=0.000000e+000 result=40 02:04:32 Config A/D Result=40 02:04:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:32 Get A/D filter: -9.255963e+061 result=40 02:04:32 Get A/D value=-858993460 result=40 02:04:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:32 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:04:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:04:32 Aux= 02:04:32 Message to Camera, serial 258763 queued 02:05:09 Received message from Master: op=PointingHead serial=258776 02:05:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:05:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:05:09 Point started: ret=0 02:05:09 point_skyscan result=0 02:05:10 Check angles 02:05:10 SkyScan query 02:05:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 02:05:11 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 02:05:11 Check angles 02:05:11 SkyScan query 02:05:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:05:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:05:12 Message to Master queued w/err=0: serial=258776 error=0 02:05:17 Received message from Master: op=Filter serial=258777 02:05:17 Color wheel filter change from 0 to 0 02:05:17 FLIGetFilterPos err=0 currentPosition=0 02:05:17 FLIGetStepsRemaining err=0 RemainingSteps=0 02:05:17 Filter is already there-color wheel unchanged 02:05:17 Received message from Master: op=Shutter serial=258778 02:05:17 Shutter LASER open 02:05:17 Received message from Camera: op=State serial=258780 02:05:17 GetSingleValue result=40 Value=cccccccc 02:05:17 SkyScan query 02:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:05:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:17 Parameters OK 02:05:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:17 Set A/D data flow result=40 02:05:17 Set A/D channel type result=40 02:05:17 Set A/D encoding result=40 02:05:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:17 Set channel filter=0.000000e+000 result=40 02:05:17 Config A/D Result=40 02:05:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:17 Get A/D filter: -9.255963e+061 result=40 02:05:17 Get A/D value=-858993460 result=40 02:05:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:17 Parameters OK 02:05:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:17 Set A/D data flow result=40 02:05:17 Set A/D channel type result=40 02:05:17 Set A/D encoding result=40 02:05:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:17 Set channel filter=0.000000e+000 result=40 02:05:17 Config A/D Result=40 02:05:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:17 Get A/D filter: -9.255963e+061 result=40 02:05:17 Get A/D value=-858993460 result=40 02:05:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:05:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:05:17 Aux= 02:05:17 Message to Camera, serial 258780 queued 02:05:26 Received message from Master: op=Shutter serial=258790 02:05:26 Shutter LASER close 02:05:26 Received message from Master: op=PointingHead serial=258794 02:05:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:05:26 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:05:27 Point started: ret=0 02:05:27 point_skyscan result=0 02:05:28 Check angles 02:05:28 SkyScan query 02:05:28 SkyScan query done: ret=0 az=136.335<-9089 ze=-142.86<-21524 Statuses=0009 0009 02:05:28 Msec=0 True Az=136.335 Ze=-142.86 Az status=0009 Ze status=0009 02:05:28 Check angles 02:05:28 SkyScan query 02:05:29 SkyScan query done: ret=0 az=154.14<-10276 ze=-121.53<-20102 Statuses=0009 0009 02:05:29 Msec=750 True Az=154.14 Ze=-121.53 Az status=0009 Ze status=0009 02:05:29 Check angles 02:05:29 SkyScan query 02:05:30 SkyScan query done: ret=0 az=171.54<-11436 ze=-100.485<-18699 Statuses=0009 0009 02:05:30 Msec=1500 True Az=171.54 Ze=-100.485 Az status=0009 Ze status=0009 02:05:30 Check angles 02:05:30 SkyScan query 02:05:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.11<-17274 Statuses=0008 0009 02:05:30 Msec=2250 True Az=176.01 Ze=-79.11 Az status=0008 Ze status=0009 02:05:31 Check angles 02:05:31 SkyScan query 02:05:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.155<-15877 Statuses=0008 0009 02:05:31 Msec=3000 True Az=176.01 Ze=-58.155 Az status=0008 Ze status=0009 02:05:31 Check angles 02:05:31 SkyScan query 02:05:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:05:32 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:05:32 Message to Master queued w/err=0: serial=258794 error=0 02:05:37 Received message from Master: op=Filter serial=258795 02:05:37 Color wheel filter change from 0 to 0 02:05:37 FLIGetFilterPos err=0 currentPosition=0 02:05:37 FLIGetStepsRemaining err=0 RemainingSteps=0 02:05:37 Filter is already there-color wheel unchanged 02:05:37 Received message from Master: op=Shutter serial=258796 02:05:37 Shutter LASER close 02:05:37 Received message from Camera: op=State serial=258798 02:05:37 GetSingleValue result=40 Value=cccccccc 02:05:37 SkyScan query 02:05:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:05:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:38 Parameters OK 02:05:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:38 Set A/D data flow result=40 02:05:38 Set A/D channel type result=40 02:05:38 Set A/D encoding result=40 02:05:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:38 Set channel filter=0.000000e+000 result=40 02:05:38 Config A/D Result=40 02:05:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:38 Get A/D filter: -9.255963e+061 result=40 02:05:38 Get A/D value=-858993460 result=40 02:05:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:38 Parameters OK 02:05:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:38 Set A/D data flow result=40 02:05:38 Set A/D channel type result=40 02:05:38 Set A/D encoding result=40 02:05:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:38 Set channel filter=0.000000e+000 result=40 02:05:38 Config A/D Result=40 02:05:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:38 Get A/D filter: -9.255963e+061 result=40 02:05:38 Get A/D value=-858993460 result=40 02:05:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:05:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:05:38 Aux= 02:05:38 Message to Camera, serial 258798 queued 02:06:15 Received message from Master: op=PointingHead serial=258811 02:06:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:06:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:06:15 Point started: ret=0 02:06:15 point_skyscan result=0 02:06:16 Check angles 02:06:16 SkyScan query 02:06:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.945<-13463 Statuses=0008 0009 02:06:17 Msec=0 True Az=175.995 Ze=-21.945 Az status=0008 Ze status=0009 02:06:17 Check angles 02:06:17 SkyScan query 02:06:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.945<-12063 Statuses=0008 0009 02:06:17 Msec=750 True Az=175.995 Ze=-0.945 Az status=0008 Ze status=0009 02:06:17 Check angles 02:06:17 SkyScan query [UTC 2018-12-19 02:06:18] 02:06:18 SkyScan query done: ret=0 az=175.995<-11733 ze=19.965<-10669 Statuses=0008 0009 02:06:18 Msec=1500 True Az=175.995 Ze=19.965 Az status=0008 Ze status=0009 02:06:18 Check angles 02:06:18 SkyScan query 02:06:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0009 02:06:19 Msec=2250 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0009 02:06:19 Check angles 02:06:19 SkyScan query 02:06:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.55<-9430 Statuses=0008 0008 02:06:20 Msec=3000 True Az=175.995 Ze=38.55 Az status=0008 Ze status=0008 02:06:20 Message to Master queued w/err=0: serial=258811 error=0 02:06:25 Received message from Master: op=Filter serial=258812 02:06:25 Color wheel filter change from 0 to 0 02:06:25 FLIGetFilterPos err=0 currentPosition=0 02:06:25 FLIGetStepsRemaining err=0 RemainingSteps=0 02:06:25 Filter is already there-color wheel unchanged 02:06:25 Received message from Master: op=Shutter serial=258813 02:06:25 Shutter LASER close 02:06:25 Received message from Camera: op=State serial=258815 02:06:25 GetSingleValue result=40 Value=cccccccc 02:06:25 SkyScan query 02:06:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:06:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:25 Parameters OK 02:06:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:25 Set A/D data flow result=40 02:06:25 Set A/D channel type result=40 02:06:25 Set A/D encoding result=40 02:06:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:25 Set channel filter=0.000000e+000 result=40 02:06:25 Config A/D Result=40 02:06:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:25 Get A/D filter: -9.255963e+061 result=40 02:06:25 Get A/D value=-858993460 result=40 02:06:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:25 Parameters OK 02:06:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:25 Set A/D data flow result=40 02:06:25 Set A/D channel type result=40 02:06:25 Set A/D encoding result=40 02:06:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:25 Set channel filter=0.000000e+000 result=40 02:06:25 Config A/D Result=40 02:06:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:25 Get A/D filter: -9.255963e+061 result=40 02:06:25 Get A/D value=-858993460 result=40 02:06:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:06:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:06:25 Aux= 02:06:25 Message to Camera, serial 258815 queued 02:07:02 Received message from Master: op=PointingHead serial=258828 02:07:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:07:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:07:02 Point started: ret=0 02:07:02 point_skyscan result=0 02:07:03 Check angles 02:07:03 SkyScan query 02:07:04 SkyScan query done: ret=0 az=153.06<-10204 ze=8.745<-11417 Statuses=0009 0009 02:07:04 Msec=0 True Az=153.06 Ze=8.745 Az status=0009 Ze status=0009 02:07:04 Check angles 02:07:04 SkyScan query 02:07:05 SkyScan query done: ret=0 az=135.075<-9005 ze=-12.6<-12840 Statuses=0009 0009 02:07:05 Msec=750 True Az=135.075 Ze=-12.6 Az status=0009 Ze status=0009 02:07:05 Check angles 02:07:05 SkyScan query 02:07:05 SkyScan query done: ret=0 az=117.39<-7826 ze=-34.05<-14270 Statuses=0009 0009 02:07:05 Msec=1500 True Az=117.39 Ze=-34.05 Az status=0009 Ze status=0009 02:07:06 Check angles 02:07:06 SkyScan query 02:07:06 SkyScan query done: ret=0 az=99.99<-6666 ze=-51.57<-15438 Statuses=0009 0009 02:07:06 Msec=2250 True Az=99.99 Ze=-51.57 Az status=0009 Ze status=0009 02:07:06 Check angles 02:07:06 SkyScan query 02:07:07 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 02:07:07 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 02:07:07 Check angles 02:07:07 SkyScan query 02:07:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:07:08 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:07:08 Message to Master queued w/err=0: serial=258828 error=0 02:07:13 Received message from Master: op=Filter serial=258829 02:07:13 Color wheel filter change from 0 to 0 02:07:13 FLIGetFilterPos err=0 currentPosition=0 02:07:13 FLIGetStepsRemaining err=0 RemainingSteps=0 02:07:13 Filter is already there-color wheel unchanged 02:07:13 Received message from Master: op=Shutter serial=258830 02:07:13 Shutter LASER close 02:07:13 Received message from Camera: op=State serial=258832 02:07:13 GetSingleValue result=40 Value=cccccccc 02:07:13 SkyScan query 02:07:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:07:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:13 Parameters OK 02:07:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:13 Set A/D data flow result=40 02:07:13 Set A/D channel type result=40 02:07:13 Set A/D encoding result=40 02:07:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:13 Set channel filter=0.000000e+000 result=40 02:07:13 Config A/D Result=40 02:07:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:13 Get A/D filter: -9.255963e+061 result=40 02:07:13 Get A/D value=-858993460 result=40 02:07:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:13 Parameters OK 02:07:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:13 Set A/D data flow result=40 02:07:13 Set A/D channel type result=40 02:07:13 Set A/D encoding result=40 02:07:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:13 Set channel filter=0.000000e+000 result=40 02:07:13 Config A/D Result=40 02:07:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:13 Get A/D filter: -9.255963e+061 result=40 02:07:13 Get A/D value=-858993460 result=40 02:07:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:07:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:07:13 Aux= 02:07:13 Message to Camera, serial 258832 queued 02:07:50 Received message from Master: op=PointingHead serial=258845 02:07:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:07:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:07:51 Point started: ret=0 02:07:51 point_skyscan result=0 02:07:51 Check angles 02:07:51 SkyScan query 02:07:52 SkyScan query done: ret=0 az=108.75<-7250 ze=-80.97<-17398 Statuses=0009 0009 02:07:52 Msec=0 True Az=108.75 Ze=-80.97 Az status=0009 Ze status=0009 02:07:52 Check angles 02:07:52 SkyScan query 02:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.94<-18796 Statuses=0008 0009 02:07:53 Msec=750 True Az=112.995 Ze=-101.94 Az status=0008 Ze status=0009 02:07:53 Check angles 02:07:53 SkyScan query 02:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 02:07:53 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 02:07:54 Check angles 02:07:54 SkyScan query 02:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.835<-21589 Statuses=0008 0009 02:07:54 Msec=2250 True Az=112.995 Ze=-143.835 Az status=0008 Ze status=0009 02:07:54 Check angles 02:07:54 SkyScan query 02:07:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.76<-22984 Statuses=0008 0009 02:07:55 Msec=3000 True Az=112.995 Ze=-164.76 Az status=0008 Ze status=0009 02:07:55 Check angles 02:07:55 SkyScan query 02:07:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:07:56 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:07:56 Message to Master queued w/err=0: serial=258845 error=0 02:08:01 Received message from Master: op=Filter serial=258846 02:08:01 Color wheel filter change from 0 to 0 02:08:01 FLIGetFilterPos err=0 currentPosition=0 02:08:01 FLIGetStepsRemaining err=0 RemainingSteps=0 02:08:01 Filter is already there-color wheel unchanged 02:08:01 Received message from Master: op=Shutter serial=258847 02:08:01 Shutter LASER open 02:08:01 Received message from Camera: op=State serial=258849 02:08:01 GetSingleValue result=40 Value=cccccccc 02:08:01 SkyScan query 02:08:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:08:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:02 Parameters OK 02:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:02 Set A/D data flow result=40 02:08:02 Set A/D channel type result=40 02:08:02 Set A/D encoding result=40 02:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:02 Set channel filter=0.000000e+000 result=40 02:08:02 Config A/D Result=40 02:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:02 Get A/D filter: -9.255963e+061 result=40 02:08:02 Get A/D value=-858993460 result=40 02:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:02 Parameters OK 02:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:02 Set A/D data flow result=40 02:08:02 Set A/D channel type result=40 02:08:02 Set A/D encoding result=40 02:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:02 Set channel filter=0.000000e+000 result=40 02:08:02 Config A/D Result=40 02:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:02 Get A/D filter: -9.255963e+061 result=40 02:08:02 Get A/D value=-858993460 result=40 02:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:08:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:08:02 Aux= 02:08:02 Message to Camera, serial 258849 queued 02:08:10 Received message from Master: op=Shutter serial=258859 02:08:10 Shutter LASER close 02:08:10 Received message from Master: op=PointingHead serial=258863 02:08:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:08:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:08:11 Point started: ret=0 02:08:11 point_skyscan result=0 02:08:12 Check angles 02:08:12 SkyScan query 02:08:12 SkyScan query done: ret=0 az=89.805<-5987 ze=157.065<-1529 Statuses=0009 0009 02:08:12 Msec=0 True Az=89.805 Ze=157.065 Az status=0009 Ze status=0009 02:08:12 Check angles 02:08:12 SkyScan query 02:08:13 SkyScan query done: ret=0 az=71.865<-4791 ze=135.705<-2953 Statuses=0009 0009 02:08:13 Msec=750 True Az=71.865 Ze=135.705 Az status=0009 Ze status=0009 02:08:13 Check angles 02:08:13 SkyScan query 02:08:14 SkyScan query done: ret=0 az=54.48<-3632 ze=114.69<-4354 Statuses=0009 0009 02:08:14 Msec=1500 True Az=54.48 Ze=114.69 Az status=0009 Ze status=0009 02:08:14 Check angles 02:08:14 SkyScan query 02:08:14 SkyScan query done: ret=0 az=41.01<-2734 ze=93.78<-5748 Statuses=0009 0009 02:08:14 Msec=2250 True Az=41.01 Ze=93.78 Az status=0009 Ze status=0009 02:08:15 Check angles 02:08:15 SkyScan query 02:08:15 SkyScan query done: ret=0 az=40.98<-2732 ze=72.36<-7176 Statuses=0008 0009 02:08:15 Msec=3000 True Az=40.98 Ze=72.36 Az status=0008 Ze status=0009 02:08:15 Check angles 02:08:15 SkyScan query 02:08:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 02:08:16 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 02:08:16 Check angles 02:08:16 SkyScan query 02:08:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:08:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:08:17 Message to Master queued w/err=0: serial=258863 error=0 02:08:22 Received message from Master: op=Filter serial=258864 02:08:22 Color wheel filter change from 0 to 0 02:08:22 FLIGetFilterPos err=0 currentPosition=0 02:08:22 FLIGetStepsRemaining err=0 RemainingSteps=0 02:08:22 Filter is already there-color wheel unchanged 02:08:22 Received message from Master: op=Shutter serial=258865 02:08:22 Shutter LASER close 02:08:22 Received message from Camera: op=State serial=258867 02:08:22 GetSingleValue result=40 Value=cccccccc 02:08:22 SkyScan query 02:08:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:08:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:23 Parameters OK 02:08:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:23 Set A/D data flow result=40 02:08:23 Set A/D channel type result=40 02:08:23 Set A/D encoding result=40 02:08:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:23 Set channel filter=0.000000e+000 result=40 02:08:23 Config A/D Result=40 02:08:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:23 Get A/D filter: -9.255963e+061 result=40 02:08:23 Get A/D value=-858993460 result=40 02:08:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:23 Parameters OK 02:08:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:23 Set A/D data flow result=40 02:08:23 Set A/D channel type result=40 02:08:23 Set A/D encoding result=40 02:08:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:23 Set channel filter=0.000000e+000 result=40 02:08:23 Config A/D Result=40 02:08:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:23 Get A/D filter: -9.255963e+061 result=40 02:08:23 Get A/D value=-858993460 result=40 02:08:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:08:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:08:23 Aux= 02:08:23 Message to Camera, serial 258867 queued 02:08:59 Received message from Master: op=PointingHead serial=258880 02:08:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:08:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:09:00 Point started: ret=0 02:09:00 point_skyscan result=0 02:09:01 Check angles 02:09:01 SkyScan query 02:09:01 SkyScan query done: ret=0 az=63.855<-4257 ze=66.54<-7564 Statuses=0009 0008 02:09:01 Msec=0 True Az=63.855 Ze=66.54 Az status=0009 Ze status=0008 02:09:01 Check angles 02:09:01 SkyScan query 02:09:02 SkyScan query done: ret=0 az=81.195<-5413 ze=66.495<-7567 Statuses=0009 0008 02:09:02 Msec=750 True Az=81.195 Ze=66.495 Az status=0009 Ze status=0008 02:09:02 Check angles 02:09:02 SkyScan query 02:09:03 SkyScan query done: ret=0 az=98.79<-6586 ze=66.495<-7567 Statuses=0009 0008 02:09:03 Msec=1500 True Az=98.79 Ze=66.495 Az status=0009 Ze status=0008 02:09:03 Check angles 02:09:03 SkyScan query 02:09:03 SkyScan query done: ret=0 az=116.28<-7752 ze=66.495<-7567 Statuses=0009 0008 02:09:03 Msec=2250 True Az=116.28 Ze=66.495 Az status=0009 Ze status=0008 02:09:04 Check angles 02:09:04 SkyScan query 02:09:04 SkyScan query done: ret=0 az=133.62<-8908 ze=66.495<-7567 Statuses=0009 0008 02:09:04 Msec=3000 True Az=133.62 Ze=66.495 Az status=0009 Ze status=0008 02:09:04 Check angles 02:09:04 SkyScan query 02:09:05 SkyScan query done: ret=0 az=151.11<-10074 ze=66.495<-7567 Statuses=0009 0008 02:09:05 Msec=3750 True Az=151.11 Ze=66.495 Az status=0009 Ze status=0008 02:09:05 Check angles 02:09:05 SkyScan query 02:09:06 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:09:06 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:09:06 Message to Master queued w/err=0: serial=258880 error=0 02:09:11 Received message from Master: op=Filter serial=258881 02:09:11 Color wheel filter change from 0 to 0 02:09:11 FLIGetFilterPos err=0 currentPosition=0 02:09:11 FLIGetStepsRemaining err=0 RemainingSteps=0 02:09:11 Filter is already there-color wheel unchanged 02:09:11 Received message from Master: op=Shutter serial=258882 02:09:11 Shutter LASER close 02:09:11 Received message from Camera: op=State serial=258884 02:09:11 GetSingleValue result=40 Value=cccccccc 02:09:11 SkyScan query 02:09:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:09:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:11 Parameters OK 02:09:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:11 Set A/D data flow result=40 02:09:11 Set A/D channel type result=40 02:09:11 Set A/D encoding result=40 02:09:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:11 Set channel filter=0.000000e+000 result=40 02:09:11 Config A/D Result=40 02:09:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:11 Get A/D filter: -9.255963e+061 result=40 02:09:11 Get A/D value=-858993460 result=40 02:09:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:11 Parameters OK 02:09:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:11 Set A/D data flow result=40 02:09:11 Set A/D channel type result=40 02:09:11 Set A/D encoding result=40 02:09:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:11 Set channel filter=0.000000e+000 result=40 02:09:11 Config A/D Result=40 02:09:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:11 Get A/D filter: -9.255963e+061 result=40 02:09:11 Get A/D value=-858993460 result=40 02:09:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:09:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:09:11 Aux= 02:09:11 Message to Camera, serial 258884 queued 02:09:48 Received message from Master: op=PointingHead serial=258897 02:09:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:09:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:09:49 Point started: ret=0 02:09:49 point_skyscan result=0 02:09:49 Check angles 02:09:49 SkyScan query 02:09:50 SkyScan query done: ret=0 az=134.565<-8971 ze=36.24<-9584 Statuses=0009 0009 02:09:50 Msec=0 True Az=134.565 Ze=36.24 Az status=0009 Ze status=0009 02:09:50 Check angles 02:09:50 SkyScan query 02:09:51 SkyScan query done: ret=0 az=116.79<-7786 ze=14.805<-11013 Statuses=0009 0009 02:09:51 Msec=750 True Az=116.79 Ze=14.805 Az status=0009 Ze status=0009 02:09:51 Check angles 02:09:51 SkyScan query 02:09:51 SkyScan query done: ret=0 az=99.375<-6625 ze=-6.135<-12409 Statuses=0009 0009 02:09:51 Msec=1500 True Az=99.375 Ze=-6.135 Az status=0009 Ze status=0009 02:09:52 Check angles 02:09:52 SkyScan query 02:09:52 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.135<-13809 Statuses=0009 0009 02:09:52 Msec=2250 True Az=81.81 Ze=-27.135 Az status=0009 Ze status=0009 02:09:52 Check angles 02:09:52 SkyScan query 02:09:53 SkyScan query done: ret=0 az=64.38<-4292 ze=-38.58<-14572 Statuses=0009 0008 02:09:53 Msec=3000 True Az=64.38 Ze=-38.58 Az status=0009 Ze status=0008 02:09:53 Check angles 02:09:53 SkyScan query 02:09:54 SkyScan query done: ret=0 az=46.935<-3129 ze=-38.52<-14568 Statuses=0009 0008 02:09:54 Msec=3750 True Az=46.935 Ze=-38.52 Az status=0009 Ze status=0008 02:09:54 Check angles 02:09:54 SkyScan query 02:09:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:09:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:09:54 Message to Master queued w/err=0: serial=258897 error=0 02:09:59 Received message from Master: op=Filter serial=258898 02:09:59 Color wheel filter change from 0 to 0 02:09:59 FLIGetFilterPos err=0 currentPosition=0 02:09:59 FLIGetStepsRemaining err=0 RemainingSteps=0 02:09:59 Filter is already there-color wheel unchanged 02:10:00 Received message from Master: op=Shutter serial=258899 02:10:00 Shutter LASER close 02:10:00 Received message from Camera: op=State serial=258901 02:10:00 GetSingleValue result=40 Value=cccccccc 02:10:00 SkyScan query 02:10:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:10:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:00 Parameters OK 02:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:00 Set A/D data flow result=40 02:10:00 Set A/D channel type result=40 02:10:00 Set A/D encoding result=40 02:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:00 Set channel filter=0.000000e+000 result=40 02:10:00 Config A/D Result=40 02:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:00 Get A/D filter: -9.255963e+061 result=40 02:10:00 Get A/D value=-858993460 result=40 02:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:00 Parameters OK 02:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:00 Set A/D data flow result=40 02:10:00 Set A/D channel type result=40 02:10:00 Set A/D encoding result=40 02:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:00 Set channel filter=0.000000e+000 result=40 02:10:00 Config A/D Result=40 02:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:00 Get A/D filter: -9.255963e+061 result=40 02:10:00 Get A/D value=-858993460 result=40 02:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:10:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:10:00 Aux= 02:10:00 Message to Camera, serial 258901 queued 02:10:37 Received message from Master: op=PointingHead serial=258914 02:10:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:10:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:10:37 Point started: ret=0 02:10:37 point_skyscan result=0 02:10:38 Check angles 02:10:38 SkyScan query 02:10:39 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.115<-16541 Statuses=0009 0009 02:10:39 Msec=0 True Az=63.885 Ze=-68.115 Az status=0009 Ze status=0009 02:10:39 Check angles 02:10:39 SkyScan query 02:10:40 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.07<-17938 Statuses=0009 0009 02:10:40 Msec=750 True Az=81.315 Ze=-89.07 Az status=0009 Ze status=0009 02:10:40 Check angles 02:10:40 SkyScan query 02:10:40 SkyScan query done: ret=0 az=98.805<-6587 ze=-110.01<-19334 Statuses=0009 0009 02:10:40 Msec=1500 True Az=98.805 Ze=-110.01 Az status=0009 Ze status=0009 02:10:40 Check angles 02:10:40 SkyScan query 02:10:41 SkyScan query done: ret=0 az=116.085<-7739 ze=-131.1<-20740 Statuses=0009 0009 02:10:41 Msec=2250 True Az=116.085 Ze=-131.1 Az status=0009 Ze status=0009 02:10:41 Check angles 02:10:41 SkyScan query 02:10:42 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 02:10:42 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 02:10:42 Check angles 02:10:42 SkyScan query 02:10:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:10:43 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:10:43 Message to Master queued w/err=0: serial=258914 error=0 02:10:48 Received message from Master: op=Filter serial=258915 02:10:48 Color wheel filter change from 0 to 0 02:10:48 FLIGetFilterPos err=0 currentPosition=0 02:10:48 FLIGetStepsRemaining err=0 RemainingSteps=0 02:10:48 Filter is already there-color wheel unchanged 02:10:48 Received message from Master: op=Shutter serial=258916 02:10:48 Shutter LASER close 02:10:48 Received message from Camera: op=State serial=258918 02:10:48 GetSingleValue result=40 Value=cccccccc 02:10:48 SkyScan query 02:10:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:10:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:48 Parameters OK 02:10:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:48 Set A/D data flow result=40 02:10:48 Set A/D channel type result=40 02:10:48 Set A/D encoding result=40 02:10:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:48 Set channel filter=0.000000e+000 result=40 02:10:48 Config A/D Result=40 02:10:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:48 Get A/D filter: -9.255963e+061 result=40 02:10:48 Get A/D value=-858993460 result=40 02:10:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:48 Parameters OK 02:10:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:48 Set A/D data flow result=40 02:10:48 Set A/D channel type result=40 02:10:48 Set A/D encoding result=40 02:10:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:48 Set channel filter=0.000000e+000 result=40 02:10:48 Config A/D Result=40 02:10:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:48 Get A/D filter: -9.255963e+061 result=40 02:10:48 Get A/D value=-858993460 result=40 02:10:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:10:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:10:48 Aux= 02:10:48 Message to Camera, serial 258918 queued 02:11:25 Received message from Master: op=PointingHead serial=258931 02:11:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:11:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:11:25 Point started: ret=0 02:11:25 point_skyscan result=0 02:11:26 Check angles 02:11:26 SkyScan query 02:11:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 02:11:27 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 02:11:27 Check angles 02:11:27 SkyScan query 02:11:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:11:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:11:28 Message to Master queued w/err=0: serial=258931 error=0 02:11:33 Received message from Master: op=Filter serial=258932 02:11:33 Color wheel filter change from 0 to 0 02:11:33 FLIGetFilterPos err=0 currentPosition=0 02:11:33 FLIGetStepsRemaining err=0 RemainingSteps=0 02:11:33 Filter is already there-color wheel unchanged 02:11:33 Received message from Master: op=Shutter serial=258933 02:11:33 Shutter LASER open 02:11:33 Received message from Camera: op=State serial=258935 02:11:33 GetSingleValue result=40 Value=cccccccc 02:11:33 SkyScan query 02:11:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:11:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:34 Parameters OK 02:11:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:34 Set A/D data flow result=40 02:11:34 Set A/D channel type result=40 02:11:34 Set A/D encoding result=40 02:11:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:34 Set channel filter=0.000000e+000 result=40 02:11:34 Config A/D Result=40 02:11:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:34 Get A/D filter: -9.255963e+061 result=40 02:11:34 Get A/D value=-858993460 result=40 02:11:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:34 Parameters OK 02:11:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:34 Set A/D data flow result=40 02:11:34 Set A/D channel type result=40 02:11:34 Set A/D encoding result=40 02:11:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:34 Set channel filter=0.000000e+000 result=40 02:11:34 Config A/D Result=40 02:11:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:34 Get A/D filter: -9.255963e+061 result=40 02:11:34 Get A/D value=-858993460 result=40 02:11:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:11:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:11:34 Aux= 02:11:34 Message to Camera, serial 258935 queued 02:11:42 Received message from Master: op=Shutter serial=258945 02:11:42 Shutter LASER close 02:11:43 Received message from Master: op=PointingHead serial=258949 02:11:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:11:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:11:43 Point started: ret=0 02:11:43 point_skyscan result=0 02:11:44 Check angles 02:11:44 SkyScan query 02:11:44 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.725<-21515 Statuses=0009 0009 02:11:44 Msec=0 True Az=136.38 Ze=-142.725 Az status=0009 Ze status=0009 02:11:44 Check angles 02:11:44 SkyScan query 02:11:45 SkyScan query done: ret=0 az=154.17<-10278 ze=-121.365<-20091 Statuses=0009 0009 02:11:45 Msec=750 True Az=154.17 Ze=-121.365 Az status=0009 Ze status=0009 02:11:45 Check angles 02:11:45 SkyScan query 02:11:46 SkyScan query done: ret=0 az=171.645<-11443 ze=-100.32<-18688 Statuses=0009 0009 02:11:46 Msec=1500 True Az=171.645 Ze=-100.32 Az status=0009 Ze status=0009 02:11:46 Check angles 02:11:46 SkyScan query 02:11:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.395<-17293 Statuses=0008 0009 02:11:46 Msec=2250 True Az=176.01 Ze=-79.395 Az status=0008 Ze status=0009 02:11:47 Check angles 02:11:47 SkyScan query 02:11:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.035<-15869 Statuses=0008 0009 02:11:47 Msec=3000 True Az=176.01 Ze=-58.035 Az status=0008 Ze status=0009 02:11:47 Check angles 02:11:47 SkyScan query 02:11:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:11:48 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:11:48 Message to Master queued w/err=0: serial=258949 error=0 02:11:53 Received message from Master: op=Filter serial=258950 02:11:53 Color wheel filter change from 0 to 0 02:11:53 FLIGetFilterPos err=0 currentPosition=0 02:11:53 FLIGetStepsRemaining err=0 RemainingSteps=0 02:11:53 Filter is already there-color wheel unchanged 02:11:53 Received message from Master: op=Shutter serial=258951 02:11:53 Shutter LASER close 02:11:53 Received message from Camera: op=State serial=258953 02:11:53 GetSingleValue result=40 Value=cccccccc 02:11:53 SkyScan query 02:11:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:11:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:54 Parameters OK 02:11:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:54 Set A/D data flow result=40 02:11:54 Set A/D channel type result=40 02:11:54 Set A/D encoding result=40 02:11:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:54 Set channel filter=0.000000e+000 result=40 02:11:54 Config A/D Result=40 02:11:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:54 Get A/D filter: -9.255963e+061 result=40 02:11:54 Get A/D value=-858993460 result=40 02:11:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:54 Parameters OK 02:11:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:54 Set A/D data flow result=40 02:11:54 Set A/D channel type result=40 02:11:54 Set A/D encoding result=40 02:11:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:54 Set channel filter=0.000000e+000 result=40 02:11:54 Config A/D Result=40 02:11:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:54 Get A/D filter: -9.255963e+061 result=40 02:11:54 Get A/D value=-858993460 result=40 02:11:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:11:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:11:54 Aux= 02:11:54 Message to Camera, serial 258953 queued 02:12:31 Received message from Master: op=PointingHead serial=258966 02:12:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:12:31 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:12:31 Point started: ret=0 02:12:31 point_skyscan result=0 02:12:32 Check angles 02:12:32 SkyScan query 02:12:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.795<-13453 Statuses=0008 0009 02:12:33 Msec=0 True Az=175.995 Ze=-21.795 Az status=0008 Ze status=0009 02:12:33 Check angles 02:12:33 SkyScan query 02:12:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.765<-12051 Statuses=0008 0009 02:12:33 Msec=750 True Az=175.995 Ze=-0.765 Az status=0008 Ze status=0009 02:12:33 Check angles 02:12:33 SkyScan query 02:12:34 SkyScan query done: ret=0 az=175.995<-11733 ze=20.22<-10652 Statuses=0008 0009 02:12:34 Msec=1500 True Az=175.995 Ze=20.22 Az status=0008 Ze status=0009 02:12:34 Check angles 02:12:34 SkyScan query 02:12:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.55<-9430 Statuses=0008 0009 02:12:35 Msec=2250 True Az=175.995 Ze=38.55 Az status=0008 Ze status=0009 02:12:35 Check angles 02:12:35 SkyScan query 02:12:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 02:12:36 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 02:12:36 Message to Master queued w/err=0: serial=258966 error=0 02:12:41 Received message from Master: op=Filter serial=258967 02:12:41 Color wheel filter change from 0 to 0 02:12:41 FLIGetFilterPos err=0 currentPosition=0 02:12:41 FLIGetStepsRemaining err=0 RemainingSteps=0 02:12:41 Filter is already there-color wheel unchanged 02:12:41 Received message from Master: op=Shutter serial=258968 02:12:41 Shutter LASER close 02:12:41 Received message from Camera: op=State serial=258970 02:12:41 GetSingleValue result=40 Value=cccccccc 02:12:41 SkyScan query 02:12:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:12:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:41 Parameters OK 02:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:41 Set A/D data flow result=40 02:12:41 Set A/D channel type result=40 02:12:41 Set A/D encoding result=40 02:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:41 Set channel filter=0.000000e+000 result=40 02:12:41 Config A/D Result=40 02:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:41 Get A/D filter: -9.255963e+061 result=40 02:12:41 Get A/D value=-858993460 result=40 02:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:41 Parameters OK 02:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:41 Set A/D data flow result=40 02:12:41 Set A/D channel type result=40 02:12:41 Set A/D encoding result=40 02:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:41 Set channel filter=0.000000e+000 result=40 02:12:41 Config A/D Result=40 02:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:41 Get A/D filter: -9.255963e+061 result=40 02:12:41 Get A/D value=-858993460 result=40 02:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:12:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:12:41 Aux= 02:12:41 Message to Camera, serial 258970 queued 02:13:18 Received message from Master: op=PointingHead serial=258983 02:13:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:13:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:13:19 Point started: ret=0 02:13:19 point_skyscan result=0 02:13:19 Check angles 02:13:19 SkyScan query 02:13:20 SkyScan query done: ret=0 az=152.91<-10194 ze=8.595<-11427 Statuses=0009 0009 02:13:20 Msec=0 True Az=152.91 Ze=8.595 Az status=0009 Ze status=0009 02:13:20 Check angles 02:13:20 SkyScan query 02:13:21 SkyScan query done: ret=0 az=135.555<-9037 ze=-12.33<-12822 Statuses=0009 0009 02:13:21 Msec=750 True Az=135.555 Ze=-12.33 Az status=0009 Ze status=0009 02:13:21 Check angles 02:13:21 SkyScan query 02:13:21 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.765<-14251 Statuses=0009 0009 02:13:21 Msec=1500 True Az=117.6 Ze=-33.765 Az status=0009 Ze status=0009 02:13:22 Check angles 02:13:22 SkyScan query 02:13:22 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.555<-15437 Statuses=0009 0009 02:13:22 Msec=2250 True Az=100.245 Ze=-51.555 Az status=0009 Ze status=0009 02:13:22 Check angles 02:13:22 SkyScan query 02:13:23 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 02:13:23 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 02:13:23 Check angles 02:13:23 SkyScan query 02:13:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:13:24 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:13:24 Message to Master queued w/err=0: serial=258983 error=0 02:13:29 Received message from Master: op=Filter serial=258984 02:13:29 Color wheel filter change from 0 to 0 02:13:29 FLIGetFilterPos err=0 currentPosition=0 02:13:29 FLIGetStepsRemaining err=0 RemainingSteps=0 02:13:29 Filter is already there-color wheel unchanged 02:13:29 Received message from Master: op=Shutter serial=258985 02:13:29 Shutter LASER close 02:13:29 Received message from Camera: op=State serial=258987 02:13:29 GetSingleValue result=40 Value=cccccccc 02:13:29 SkyScan query 02:13:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:13:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:29 Parameters OK 02:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:29 Set A/D data flow result=40 02:13:29 Set A/D channel type result=40 02:13:29 Set A/D encoding result=40 02:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:29 Set channel filter=0.000000e+000 result=40 02:13:29 Config A/D Result=40 02:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:29 Get A/D filter: -9.255963e+061 result=40 02:13:29 Get A/D value=-858993460 result=40 02:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:29 Parameters OK 02:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:29 Set A/D data flow result=40 02:13:29 Set A/D channel type result=40 02:13:29 Set A/D encoding result=40 02:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:29 Set channel filter=0.000000e+000 result=40 02:13:29 Config A/D Result=40 02:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:29 Get A/D filter: -9.255963e+061 result=40 02:13:29 Get A/D value=-858993460 result=40 02:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:13:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:13:29 Aux= 02:13:29 Message to Camera, serial 258987 queued 02:14:06 Received message from Master: op=PointingHead serial=259000 02:14:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:14:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:14:07 Point started: ret=0 02:14:07 point_skyscan result=0 02:14:07 Check angles 02:14:07 SkyScan query 02:14:08 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.51<-17434 Statuses=0009 0009 02:14:08 Msec=0 True Az=109.215 Ze=-81.51 Az status=0009 Ze status=0009 02:14:08 Check angles 02:14:08 SkyScan query 02:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 02:14:09 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 02:14:09 Check angles 02:14:09 SkyScan query 02:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 02:14:09 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 02:14:10 Check angles 02:14:10 SkyScan query 02:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.78<-21652 Statuses=0008 0009 02:14:10 Msec=2250 True Az=112.995 Ze=-144.78 Az status=0008 Ze status=0009 02:14:10 Check angles 02:14:10 SkyScan query 02:14:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.2<-23080 Statuses=0008 0009 02:14:11 Msec=3000 True Az=112.995 Ze=-166.2 Az status=0008 Ze status=0009 02:14:11 Check angles 02:14:11 SkyScan query 02:14:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:14:12 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:14:12 Message to Master queued w/err=0: serial=259000 error=0 02:14:17 Received message from Master: op=Filter serial=259001 02:14:17 Color wheel filter change from 0 to 0 02:14:17 FLIGetFilterPos err=0 currentPosition=0 02:14:17 FLIGetStepsRemaining err=0 RemainingSteps=0 02:14:17 Filter is already there-color wheel unchanged 02:14:17 Received message from Master: op=Shutter serial=259002 02:14:17 Shutter LASER open 02:14:17 Received message from Camera: op=State serial=259004 02:14:17 GetSingleValue result=40 Value=cccccccc 02:14:17 SkyScan query 02:14:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:14:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:18 Parameters OK 02:14:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:18 Set A/D data flow result=40 02:14:18 Set A/D channel type result=40 02:14:18 Set A/D encoding result=40 02:14:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:18 Set channel filter=0.000000e+000 result=40 02:14:18 Config A/D Result=40 02:14:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:18 Get A/D filter: -9.255963e+061 result=40 02:14:18 Get A/D value=-858993460 result=40 02:14:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:18 Parameters OK 02:14:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:18 Set A/D data flow result=40 02:14:18 Set A/D channel type result=40 02:14:18 Set A/D encoding result=40 02:14:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:18 Set channel filter=0.000000e+000 result=40 02:14:18 Config A/D Result=40 02:14:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:18 Get A/D filter: -9.255963e+061 result=40 02:14:18 Get A/D value=-858993460 result=40 02:14:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:14:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:14:18 Aux= 02:14:18 Message to Camera, serial 259004 queued 02:14:26 Received message from Master: op=Shutter serial=259014 02:14:26 Shutter LASER close 02:14:27 Received message from Master: op=PointingHead serial=259018 02:14:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:14:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:14:27 Point started: ret=0 02:14:27 point_skyscan result=0 02:14:28 Check angles 02:14:28 SkyScan query 02:14:28 SkyScan query done: ret=0 az=89.64<-5976 ze=156.99<-1534 Statuses=0009 0009 02:14:28 Msec=0 True Az=89.64 Ze=156.99 Az status=0009 Ze status=0009 02:14:28 Check angles 02:14:28 SkyScan query 02:14:29 SkyScan query done: ret=0 az=72.09<-4806 ze=136.08<-2928 Statuses=0009 0009 02:14:29 Msec=750 True Az=72.09 Ze=136.08 Az status=0009 Ze status=0009 02:14:29 Check angles 02:14:29 SkyScan query 02:14:30 SkyScan query done: ret=0 az=54.81<-3654 ze=115.125<-4325 Statuses=0009 0009 02:14:30 Msec=1500 True Az=54.81 Ze=115.125 Az status=0009 Ze status=0009 02:14:30 Check angles 02:14:30 SkyScan query 02:14:30 SkyScan query done: ret=0 az=41.01<-2734 ze=94.14<-5724 Statuses=0009 0009 02:14:30 Msec=2250 True Az=41.01 Ze=94.14 Az status=0009 Ze status=0009 02:14:31 Check angles 02:14:31 SkyScan query 02:14:31 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 02:14:31 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 02:14:31 Check angles 02:14:31 SkyScan query 02:14:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 02:14:32 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 02:14:32 Check angles 02:14:32 SkyScan query 02:14:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:14:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:14:33 Message to Master queued w/err=0: serial=259018 error=0 02:14:38 Received message from Master: op=Filter serial=259019 02:14:38 Color wheel filter change from 0 to 0 02:14:38 FLIGetFilterPos err=0 currentPosition=0 02:14:38 FLIGetStepsRemaining err=0 RemainingSteps=0 02:14:38 Filter is already there-color wheel unchanged 02:14:38 Received message from Master: op=Shutter serial=259020 02:14:38 Shutter LASER close 02:14:38 Received message from Camera: op=State serial=259022 02:14:38 GetSingleValue result=40 Value=cccccccc 02:14:38 SkyScan query 02:14:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:14:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:39 Parameters OK 02:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:39 Set A/D data flow result=40 02:14:39 Set A/D channel type result=40 02:14:39 Set A/D encoding result=40 02:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:39 Set channel filter=0.000000e+000 result=40 02:14:39 Config A/D Result=40 02:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:39 Get A/D filter: -9.255963e+061 result=40 02:14:39 Get A/D value=-858993460 result=40 02:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:39 Parameters OK 02:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:39 Set A/D data flow result=40 02:14:39 Set A/D channel type result=40 02:14:39 Set A/D encoding result=40 02:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:39 Set channel filter=0.000000e+000 result=40 02:14:39 Config A/D Result=40 02:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:39 Get A/D filter: -9.255963e+061 result=40 02:14:39 Get A/D value=-858993460 result=40 02:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:14:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:14:39 Aux= 02:14:39 Message to Camera, serial 259022 queued 02:15:15 Received message from Master: op=PointingHead serial=259035 02:15:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:15:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:15:16 Point started: ret=0 02:15:16 point_skyscan result=0 02:15:17 Check angles 02:15:17 SkyScan query 02:15:17 SkyScan query done: ret=0 az=63.795<-4253 ze=66.54<-7564 Statuses=0009 0008 02:15:17 Msec=0 True Az=63.795 Ze=66.54 Az status=0009 Ze status=0008 02:15:17 Check angles 02:15:17 SkyScan query 02:15:18 SkyScan query done: ret=0 az=81.06<-5404 ze=66.51<-7566 Statuses=0009 0008 02:15:18 Msec=750 True Az=81.06 Ze=66.51 Az status=0009 Ze status=0008 02:15:18 Check angles 02:15:18 SkyScan query 02:15:19 SkyScan query done: ret=0 az=98.625<-6575 ze=66.495<-7567 Statuses=0009 0008 02:15:19 Msec=1500 True Az=98.625 Ze=66.495 Az status=0009 Ze status=0008 02:15:19 Check angles 02:15:19 SkyScan query 02:15:19 SkyScan query done: ret=0 az=116.04<-7736 ze=66.495<-7567 Statuses=0009 0008 02:15:19 Msec=2250 True Az=116.04 Ze=66.495 Az status=0009 Ze status=0008 02:15:20 Check angles 02:15:20 SkyScan query 02:15:20 SkyScan query done: ret=0 az=133.5<-8900 ze=66.495<-7567 Statuses=0009 0008 02:15:20 Msec=3000 True Az=133.5 Ze=66.495 Az status=0009 Ze status=0008 02:15:20 Check angles 02:15:20 SkyScan query 02:15:21 SkyScan query done: ret=0 az=150.99<-10066 ze=66.495<-7567 Statuses=0009 0008 02:15:21 Msec=3750 True Az=150.99 Ze=66.495 Az status=0009 Ze status=0008 02:15:21 Check angles 02:15:21 SkyScan query 02:15:22 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:15:22 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:15:22 Message to Master queued w/err=0: serial=259035 error=0 02:15:27 Received message from Master: op=Filter serial=259036 02:15:27 Color wheel filter change from 0 to 0 02:15:27 FLIGetFilterPos err=0 currentPosition=0 02:15:27 FLIGetStepsRemaining err=0 RemainingSteps=0 02:15:27 Filter is already there-color wheel unchanged 02:15:27 Received message from Master: op=Shutter serial=259037 02:15:27 Shutter LASER close 02:15:27 Received message from Master: op=Identify serial=259038 02:15:27 Received message from Camera: op=State serial=259042 02:15:27 GetSingleValue result=40 Value=cccccccc 02:15:27 SkyScan query 02:15:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:15:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:27 Parameters OK 02:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:27 Set A/D data flow result=40 02:15:27 Set A/D channel type result=40 02:15:27 Set A/D encoding result=40 02:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:27 Set channel filter=0.000000e+000 result=40 02:15:27 Config A/D Result=40 02:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:27 Get A/D filter: -9.255963e+061 result=40 02:15:27 Get A/D value=-858993460 result=40 02:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:27 Parameters OK 02:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:27 Set A/D data flow result=40 02:15:27 Set A/D channel type result=40 02:15:27 Set A/D encoding result=40 02:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:27 Set channel filter=0.000000e+000 result=40 02:15:27 Config A/D Result=40 02:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:27 Get A/D filter: -9.255963e+061 result=40 02:15:27 Get A/D value=-858993460 result=40 02:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:15:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:15:27 Aux= 02:15:27 Message to Camera, serial 259042 queued [UTC 2018-12-19 02:15:52] 02:16:04 Received message from Master: op=PointingHead serial=259055 02:16:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:16:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:16:05 Point started: ret=0 02:16:05 point_skyscan result=0 02:16:05 Check angles 02:16:05 SkyScan query 02:16:06 SkyScan query done: ret=0 az=134.82<-8988 ze=36.645<-9557 Statuses=0009 0009 02:16:06 Msec=0 True Az=134.82 Ze=36.645 Az status=0009 Ze status=0009 02:16:06 Check angles 02:16:06 SkyScan query 02:16:07 SkyScan query done: ret=0 az=117.03<-7802 ze=15.255<-10983 Statuses=0009 0009 02:16:07 Msec=750 True Az=117.03 Ze=15.255 Az status=0009 Ze status=0009 02:16:07 Check angles 02:16:07 SkyScan query 02:16:07 SkyScan query done: ret=0 az=99.675<-6645 ze=-5.715<-12381 Statuses=0009 0009 02:16:07 Msec=1500 True Az=99.675 Ze=-5.715 Az status=0009 Ze status=0009 02:16:08 Check angles 02:16:08 SkyScan query 02:16:08 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.7<-13780 Statuses=0009 0009 02:16:08 Msec=2250 True Az=82.14 Ze=-26.7 Az status=0009 Ze status=0009 02:16:08 Check angles 02:16:08 SkyScan query 02:16:09 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.58<-14572 Statuses=0009 0008 02:16:09 Msec=3000 True Az=64.62 Ze=-38.58 Az status=0009 Ze status=0008 02:16:09 Check angles 02:16:09 SkyScan query 02:16:10 SkyScan query done: ret=0 az=46.83<-3122 ze=-38.52<-14568 Statuses=0009 0008 02:16:10 Msec=3750 True Az=46.83 Ze=-38.52 Az status=0009 Ze status=0008 02:16:10 Check angles 02:16:10 SkyScan query 02:16:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:16:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:16:10 Message to Master queued w/err=0: serial=259055 error=0 02:16:15 Received message from Master: op=Filter serial=259056 02:16:15 Color wheel filter change from 0 to 0 02:16:15 FLIGetFilterPos err=0 currentPosition=0 02:16:15 FLIGetStepsRemaining err=0 RemainingSteps=0 02:16:15 Filter is already there-color wheel unchanged 02:16:16 Received message from Master: op=Shutter serial=259057 02:16:16 Shutter LASER close 02:16:16 Received message from Camera: op=State serial=259059 02:16:16 GetSingleValue result=40 Value=cccccccc 02:16:16 SkyScan query 02:16:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:16 Parameters OK 02:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:16 Set A/D data flow result=40 02:16:16 Set A/D channel type result=40 02:16:16 Set A/D encoding result=40 02:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:16 Set channel filter=0.000000e+000 result=40 02:16:16 Config A/D Result=40 02:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:16 Get A/D filter: -9.255963e+061 result=40 02:16:16 Get A/D value=-858993460 result=40 02:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:16 Parameters OK 02:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:16 Set A/D data flow result=40 02:16:16 Set A/D channel type result=40 02:16:16 Set A/D encoding result=40 02:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:16 Set channel filter=0.000000e+000 result=40 02:16:16 Config A/D Result=40 02:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:16 Get A/D filter: -9.255963e+061 result=40 02:16:16 Get A/D value=-858993460 result=40 02:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:16:16 Aux= 02:16:16 Message to Camera, serial 259059 queued 02:16:52 Received message from Master: op=PointingHead serial=259071 02:16:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:16:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:16:52 Point started: ret=0 02:16:52 point_skyscan result=0 02:16:53 Check angles 02:16:53 SkyScan query 02:16:54 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.49<-16566 Statuses=0009 0009 02:16:54 Msec=0 True Az=64.2 Ze=-68.49 Az status=0009 Ze status=0009 02:16:54 Check angles 02:16:54 SkyScan query 02:16:55 SkyScan query done: ret=0 az=82.11<-5474 ze=-89.865<-17991 Statuses=0009 0009 02:16:55 Msec=750 True Az=82.11 Ze=-89.865 Az status=0009 Ze status=0009 02:16:55 Check angles 02:16:55 SkyScan query 02:16:55 SkyScan query done: ret=0 az=99.855<-6657 ze=-111.24<-19416 Statuses=0009 0009 02:16:55 Msec=1500 True Az=99.855 Ze=-111.24 Az status=0009 Ze status=0009 02:16:56 Check angles 02:16:56 SkyScan query 02:16:56 SkyScan query done: ret=0 az=117.375<-7825 ze=-132.21<-20814 Statuses=0009 0009 02:16:56 Msec=2250 True Az=117.375 Ze=-132.21 Az status=0009 Ze status=0009 02:16:56 Check angles 02:16:56 SkyScan query 02:16:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 02:16:57 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 02:16:57 Check angles 02:16:57 SkyScan query 02:16:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:16:58 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:16:58 Message to Master queued w/err=0: serial=259071 error=0 02:17:03 Received message from Master: op=Filter serial=259072 02:17:03 Color wheel filter change from 0 to 0 02:17:03 FLIGetFilterPos err=0 currentPosition=0 02:17:03 FLIGetStepsRemaining err=0 RemainingSteps=0 02:17:03 Filter is already there-color wheel unchanged 02:17:03 Received message from Master: op=Shutter serial=259073 02:17:03 Shutter LASER close 02:17:03 Received message from Camera: op=State serial=259075 02:17:03 GetSingleValue result=40 Value=cccccccc 02:17:03 SkyScan query 02:17:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:17:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:03 Parameters OK 02:17:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:03 Set A/D data flow result=40 02:17:03 Set A/D channel type result=40 02:17:03 Set A/D encoding result=40 02:17:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:03 Set channel filter=0.000000e+000 result=40 02:17:03 Config A/D Result=40 02:17:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:03 Get A/D filter: -9.255963e+061 result=40 02:17:03 Get A/D value=-858993460 result=40 02:17:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:03 Parameters OK 02:17:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:03 Set A/D data flow result=40 02:17:03 Set A/D channel type result=40 02:17:03 Set A/D encoding result=40 02:17:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:03 Set channel filter=0.000000e+000 result=40 02:17:03 Config A/D Result=40 02:17:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:03 Get A/D filter: -9.255963e+061 result=40 02:17:03 Get A/D value=-858993460 result=40 02:17:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:17:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:17:03 Aux= 02:17:03 Message to Camera, serial 259075 queued 02:17:40 Received message from Master: op=PointingHead serial=259088 02:17:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:17:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:17:41 Point started: ret=0 02:17:41 point_skyscan result=0 02:17:41 Check angles 02:17:41 SkyScan query 02:17:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 02:17:42 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 02:17:42 Check angles 02:17:42 SkyScan query 02:17:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:17:43 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:17:43 Message to Master queued w/err=0: serial=259088 error=0 02:17:48 Received message from Master: op=Filter serial=259089 02:17:48 Color wheel filter change from 0 to 0 02:17:48 FLIGetFilterPos err=0 currentPosition=0 02:17:48 FLIGetStepsRemaining err=0 RemainingSteps=0 02:17:48 Filter is already there-color wheel unchanged 02:17:48 Received message from Master: op=Shutter serial=259090 02:17:48 Shutter LASER open 02:17:48 Received message from Camera: op=State serial=259092 02:17:48 GetSingleValue result=40 Value=cccccccc 02:17:48 SkyScan query 02:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:17:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:49 Parameters OK 02:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:49 Set A/D data flow result=40 02:17:49 Set A/D channel type result=40 02:17:49 Set A/D encoding result=40 02:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:49 Set channel filter=0.000000e+000 result=40 02:17:49 Config A/D Result=40 02:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:49 Get A/D filter: -9.255963e+061 result=40 02:17:49 Get A/D value=-858993460 result=40 02:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:49 Parameters OK 02:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:49 Set A/D data flow result=40 02:17:49 Set A/D channel type result=40 02:17:49 Set A/D encoding result=40 02:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:49 Set channel filter=0.000000e+000 result=40 02:17:49 Config A/D Result=40 02:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:49 Get A/D filter: -9.255963e+061 result=40 02:17:49 Get A/D value=-858993460 result=40 02:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:17:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:17:49 Aux= 02:17:49 Message to Camera, serial 259092 queued 02:17:56 Received message from Master: op=Shutter serial=259101 02:17:56 Shutter LASER close 02:17:57 Received message from Master: op=PointingHead serial=259105 02:17:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:17:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:17:57 Point started: ret=0 02:17:57 point_skyscan result=0 02:17:58 Check angles 02:17:58 SkyScan query 02:17:58 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.49<-21566 Statuses=0009 0009 02:17:58 Msec=0 True Az=135.72 Ze=-143.49 Az status=0009 Ze status=0009 02:17:59 Check angles 02:17:59 SkyScan query 02:17:59 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.07<-20138 Statuses=0009 0009 02:17:59 Msec=750 True Az=153.57 Ze=-122.07 Az status=0009 Ze status=0009 02:17:59 Check angles 02:17:59 SkyScan query 02:18:00 SkyScan query done: ret=0 az=171.15<-11410 ze=-101.145<-18743 Statuses=0009 0009 02:18:00 Msec=1500 True Az=171.15 Ze=-101.145 Az status=0009 Ze status=0009 02:18:00 Check angles 02:18:00 SkyScan query 02:18:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.205<-17347 Statuses=0008 0009 02:18:01 Msec=2250 True Az=176.01 Ze=-80.205 Az status=0008 Ze status=0009 02:18:01 Check angles 02:18:01 SkyScan query 02:18:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.755<-15917 Statuses=0008 0009 02:18:01 Msec=3000 True Az=176.01 Ze=-58.755 Az status=0008 Ze status=0009 02:18:02 Check angles 02:18:02 SkyScan query 02:18:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:18:02 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:18:02 Message to Master queued w/err=0: serial=259105 error=0 02:18:07 Received message from Master: op=Filter serial=259106 02:18:07 Color wheel filter change from 0 to 0 02:18:07 FLIGetFilterPos err=0 currentPosition=0 02:18:07 FLIGetStepsRemaining err=0 RemainingSteps=0 02:18:07 Filter is already there-color wheel unchanged 02:18:07 Received message from Master: op=Shutter serial=259107 02:18:07 Shutter LASER close 02:18:07 Received message from Camera: op=State serial=259109 02:18:07 GetSingleValue result=40 Value=cccccccc 02:18:07 SkyScan query 02:18:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:18:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:08 Parameters OK 02:18:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:08 Set A/D data flow result=40 02:18:08 Set A/D channel type result=40 02:18:08 Set A/D encoding result=40 02:18:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:08 Set channel filter=0.000000e+000 result=40 02:18:08 Config A/D Result=40 02:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:08 Get A/D filter: -9.255963e+061 result=40 02:18:08 Get A/D value=-858993460 result=40 02:18:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:08 Parameters OK 02:18:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:08 Set A/D data flow result=40 02:18:08 Set A/D channel type result=40 02:18:08 Set A/D encoding result=40 02:18:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:08 Set channel filter=0.000000e+000 result=40 02:18:08 Config A/D Result=40 02:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:08 Get A/D filter: -9.255963e+061 result=40 02:18:08 Get A/D value=-858993460 result=40 02:18:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:18:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:18:08 Aux= 02:18:08 Message to Camera, serial 259109 queued 02:18:45 Received message from Master: op=PointingHead serial=259122 02:18:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:18:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:18:45 Point started: ret=0 02:18:45 point_skyscan result=0 02:18:46 Check angles 02:18:46 SkyScan query 02:18:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.57<-13438 Statuses=0008 0009 02:18:47 Msec=0 True Az=175.995 Ze=-21.57 Az status=0008 Ze status=0009 02:18:47 Check angles 02:18:47 SkyScan query 02:18:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.18<-12012 Statuses=0008 0009 02:18:47 Msec=750 True Az=175.995 Ze=-0.18 Az status=0008 Ze status=0009 02:18:48 Check angles 02:18:48 SkyScan query 02:18:48 SkyScan query done: ret=0 az=175.995<-11733 ze=20.82<-10612 Statuses=0008 0009 02:18:48 Msec=1500 True Az=175.995 Ze=20.82 Az status=0008 Ze status=0009 02:18:48 Check angles 02:18:48 SkyScan query 02:18:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 02:18:49 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 02:18:49 Check angles 02:18:49 SkyScan query 02:18:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 02:18:50 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 02:18:50 Message to Master queued w/err=0: serial=259122 error=0 02:18:55 Received message from Master: op=Filter serial=259123 02:18:55 Color wheel filter change from 0 to 0 02:18:55 FLIGetFilterPos err=0 currentPosition=0 02:18:55 FLIGetStepsRemaining err=0 RemainingSteps=0 02:18:55 Filter is already there-color wheel unchanged 02:18:55 Received message from Master: op=Shutter serial=259124 02:18:55 Shutter LASER close 02:18:55 Received message from Camera: op=State serial=259126 02:18:55 GetSingleValue result=40 Value=cccccccc 02:18:55 SkyScan query 02:18:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:18:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:56 Parameters OK 02:18:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:56 Set A/D data flow result=40 02:18:56 Set A/D channel type result=40 02:18:56 Set A/D encoding result=40 02:18:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:56 Set channel filter=0.000000e+000 result=40 02:18:56 Config A/D Result=40 02:18:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:56 Get A/D filter: -9.255963e+061 result=40 02:18:56 Get A/D value=-858993460 result=40 02:18:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:56 Parameters OK 02:18:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:56 Set A/D data flow result=40 02:18:56 Set A/D channel type result=40 02:18:56 Set A/D encoding result=40 02:18:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:56 Set channel filter=0.000000e+000 result=40 02:18:56 Config A/D Result=40 02:18:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:56 Get A/D filter: -9.255963e+061 result=40 02:18:56 Get A/D value=-858993460 result=40 02:18:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:18:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:18:56 Aux= 02:18:56 Message to Camera, serial 259126 queued 02:19:32 Received message from Master: op=PointingHead serial=259139 02:19:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:19:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:19:33 Point started: ret=0 02:19:33 point_skyscan result=0 02:19:33 Check angles 02:19:33 SkyScan query 02:19:34 SkyScan query done: ret=0 az=152.595<-10173 ze=8.13<-11458 Statuses=0009 0009 02:19:34 Msec=0 True Az=152.595 Ze=8.13 Az status=0009 Ze status=0009 02:19:34 Check angles 02:19:34 SkyScan query 02:19:35 SkyScan query done: ret=0 az=134.73<-8982 ze=-13.185<-12879 Statuses=0009 0009 02:19:35 Msec=750 True Az=134.73 Ze=-13.185 Az status=0009 Ze status=0009 02:19:35 Check angles 02:19:35 SkyScan query 02:19:36 SkyScan query done: ret=0 az=117.27<-7818 ze=-34.185<-14279 Statuses=0009 0009 02:19:36 Msec=1500 True Az=117.27 Ze=-34.185 Az status=0009 Ze status=0009 02:19:36 Check angles 02:19:36 SkyScan query 02:19:36 SkyScan query done: ret=0 az=99.75<-6650 ze=-51.57<-15438 Statuses=0009 0009 02:19:36 Msec=2250 True Az=99.75 Ze=-51.57 Az status=0009 Ze status=0009 02:19:37 Check angles 02:19:37 SkyScan query 02:19:37 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 02:19:37 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 02:19:37 Check angles 02:19:37 SkyScan query 02:19:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:19:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:19:38 Message to Master queued w/err=0: serial=259139 error=0 02:19:43 Received message from Master: op=Filter serial=259140 02:19:43 Color wheel filter change from 0 to 0 02:19:43 FLIGetFilterPos err=0 currentPosition=0 02:19:43 FLIGetStepsRemaining err=0 RemainingSteps=0 02:19:43 Filter is already there-color wheel unchanged 02:19:43 Received message from Master: op=Shutter serial=259141 02:19:43 Shutter LASER close 02:19:43 Received message from Camera: op=State serial=259143 02:19:43 GetSingleValue result=40 Value=cccccccc 02:19:43 SkyScan query 02:19:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:19:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:44 Parameters OK 02:19:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:44 Set A/D data flow result=40 02:19:44 Set A/D channel type result=40 02:19:44 Set A/D encoding result=40 02:19:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:44 Set channel filter=0.000000e+000 result=40 02:19:44 Config A/D Result=40 02:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:44 Get A/D filter: -9.255963e+061 result=40 02:19:44 Get A/D value=-858993460 result=40 02:19:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:44 Parameters OK 02:19:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:44 Set A/D data flow result=40 02:19:44 Set A/D channel type result=40 02:19:44 Set A/D encoding result=40 02:19:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:44 Set channel filter=0.000000e+000 result=40 02:19:44 Config A/D Result=40 02:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:44 Get A/D filter: -9.255963e+061 result=40 02:19:44 Get A/D value=-858993460 result=40 02:19:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:19:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:19:44 Aux= 02:19:44 Message to Camera, serial 259143 queued 02:20:21 Received message from Master: op=PointingHead serial=259156 02:20:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:20:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:20:21 Point started: ret=0 02:20:21 point_skyscan result=0 02:20:22 Check angles 02:20:22 SkyScan query 02:20:22 SkyScan query done: ret=0 az=109.44<-7296 ze=-81.87<-17458 Statuses=0009 0009 02:20:22 Msec=0 True Az=109.44 Ze=-81.87 Az status=0009 Ze status=0009 02:20:22 Check angles 02:20:22 SkyScan query 02:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 02:20:23 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 02:20:23 Check angles 02:20:23 SkyScan query 02:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.17<-20278 Statuses=0008 0009 02:20:24 Msec=1500 True Az=112.995 Ze=-124.17 Az status=0008 Ze status=0009 02:20:24 Check angles 02:20:24 SkyScan query 02:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.14<-21676 Statuses=0008 0009 02:20:24 Msec=2250 True Az=112.995 Ze=-145.14 Az status=0008 Ze status=0009 02:20:25 Check angles 02:20:25 SkyScan query 02:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.08<-23072 Statuses=0008 0009 02:20:25 Msec=3000 True Az=112.995 Ze=-166.08 Az status=0008 Ze status=0009 02:20:25 Check angles 02:20:25 SkyScan query 02:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:20:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:20:26 Message to Master queued w/err=0: serial=259156 error=0 02:20:31 Received message from Master: op=Filter serial=259157 02:20:31 Color wheel filter change from 0 to 0 02:20:31 FLIGetFilterPos err=0 currentPosition=0 02:20:31 FLIGetStepsRemaining err=0 RemainingSteps=0 02:20:31 Filter is already there-color wheel unchanged 02:20:31 Received message from Master: op=Shutter serial=259158 02:20:31 Shutter LASER open 02:20:31 Received message from Camera: op=State serial=259160 02:20:31 GetSingleValue result=40 Value=cccccccc 02:20:31 SkyScan query 02:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:20:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:32 Parameters OK 02:20:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:32 Set A/D data flow result=40 02:20:32 Set A/D channel type result=40 02:20:32 Set A/D encoding result=40 02:20:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:32 Set channel filter=0.000000e+000 result=40 02:20:32 Config A/D Result=40 02:20:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:32 Get A/D filter: -9.255963e+061 result=40 02:20:32 Get A/D value=-858993460 result=40 02:20:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:32 Parameters OK 02:20:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:32 Set A/D data flow result=40 02:20:32 Set A/D channel type result=40 02:20:32 Set A/D encoding result=40 02:20:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:32 Set channel filter=0.000000e+000 result=40 02:20:32 Config A/D Result=40 02:20:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:32 Get A/D filter: -9.255963e+061 result=40 02:20:32 Get A/D value=-858993460 result=40 02:20:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:20:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:20:32 Aux= 02:20:32 Message to Camera, serial 259160 queued 02:20:40 Received message from Master: op=Shutter serial=259170 02:20:40 Shutter LASER close 02:20:41 Received message from Master: op=PointingHead serial=259174 02:20:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:20:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:20:41 Point started: ret=0 02:20:41 point_skyscan result=0 02:20:42 Check angles 02:20:42 SkyScan query 02:20:42 SkyScan query done: ret=0 az=90.075<-6005 ze=157.38<-1508 Statuses=0009 0009 02:20:42 Msec=0 True Az=90.075 Ze=157.38 Az status=0009 Ze status=0009 02:20:43 Check angles 02:20:43 SkyScan query 02:20:43 SkyScan query done: ret=0 az=72.21<-4814 ze=136.005<-2933 Statuses=0009 0009 02:20:43 Msec=750 True Az=72.21 Ze=136.005 Az status=0009 Ze status=0009 02:20:43 Check angles 02:20:43 SkyScan query 02:20:44 SkyScan query done: ret=0 az=54.435<-3629 ze=114.555<-4363 Statuses=0009 0009 02:20:44 Msec=1500 True Az=54.435 Ze=114.555 Az status=0009 Ze status=0009 02:20:44 Check angles 02:20:44 SkyScan query 02:20:45 SkyScan query done: ret=0 az=40.98<-2732 ze=93.21<-5786 Statuses=0009 0009 02:20:45 Msec=2250 True Az=40.98 Ze=93.21 Az status=0009 Ze status=0009 02:20:45 Check angles 02:20:45 SkyScan query 02:20:45 SkyScan query done: ret=0 az=40.98<-2732 ze=72.24<-7184 Statuses=0008 0009 02:20:45 Msec=3000 True Az=40.98 Ze=72.24 Az status=0008 Ze status=0009 02:20:46 Check angles 02:20:46 SkyScan query 02:20:46 SkyScan query done: ret=0 az=40.98<-2732 ze=51.99<-8534 Statuses=0008 0009 02:20:46 Msec=3750 True Az=40.98 Ze=51.99 Az status=0008 Ze status=0009 02:20:46 Check angles 02:20:46 SkyScan query 02:20:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:20:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:20:47 Message to Master queued w/err=0: serial=259174 error=0 02:20:52 Received message from Master: op=Filter serial=259175 02:20:52 Color wheel filter change from 0 to 0 02:20:52 FLIGetFilterPos err=0 currentPosition=0 02:20:52 FLIGetStepsRemaining err=0 RemainingSteps=0 02:20:52 Filter is already there-color wheel unchanged 02:20:52 Received message from Master: op=Shutter serial=259176 02:20:52 Shutter LASER close 02:20:52 Received message from Camera: op=State serial=259178 02:20:52 GetSingleValue result=40 Value=cccccccc 02:20:52 SkyScan query 02:20:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:20:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:53 Parameters OK 02:20:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:53 Set A/D data flow result=40 02:20:53 Set A/D channel type result=40 02:20:53 Set A/D encoding result=40 02:20:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:53 Set channel filter=0.000000e+000 result=40 02:20:53 Config A/D Result=40 02:20:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:53 Get A/D filter: -9.255963e+061 result=40 02:20:53 Get A/D value=-858993460 result=40 02:20:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:53 Parameters OK 02:20:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:53 Set A/D data flow result=40 02:20:53 Set A/D channel type result=40 02:20:53 Set A/D encoding result=40 02:20:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:53 Set channel filter=0.000000e+000 result=40 02:20:53 Config A/D Result=40 02:20:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:53 Get A/D filter: -9.255963e+061 result=40 02:20:53 Get A/D value=-858993460 result=40 02:20:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:20:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:20:53 Aux= 02:20:53 Message to Camera, serial 259178 queued 02:21:30 Received message from Master: op=PointingHead serial=259191 02:21:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:21:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:21:30 Point started: ret=0 02:21:30 point_skyscan result=0 02:21:31 Check angles 02:21:31 SkyScan query 02:21:31 SkyScan query done: ret=0 az=64.26<-4284 ze=66.555<-7563 Statuses=0009 0008 02:21:31 Msec=0 True Az=64.26 Ze=66.555 Az status=0009 Ze status=0008 02:21:32 Check angles 02:21:32 SkyScan query 02:21:32 SkyScan query done: ret=0 az=81.885<-5459 ze=66.51<-7566 Statuses=0009 0008 02:21:32 Msec=750 True Az=81.885 Ze=66.51 Az status=0009 Ze status=0008 02:21:32 Check angles 02:21:32 SkyScan query 02:21:33 SkyScan query done: ret=0 az=99.51<-6634 ze=66.495<-7567 Statuses=0009 0008 02:21:33 Msec=1500 True Az=99.51 Ze=66.495 Az status=0009 Ze status=0008 02:21:33 Check angles 02:21:33 SkyScan query 02:21:34 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 02:21:34 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 02:21:34 Check angles 02:21:34 SkyScan query 02:21:34 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 02:21:34 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 02:21:35 Check angles 02:21:35 SkyScan query 02:21:35 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 02:21:35 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 02:21:35 Check angles 02:21:35 SkyScan query 02:21:36 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:21:36 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:21:36 Message to Master queued w/err=0: serial=259191 error=0 02:21:41 Received message from Master: op=Filter serial=259192 02:21:41 Color wheel filter change from 0 to 0 02:21:41 FLIGetFilterPos err=0 currentPosition=0 02:21:41 FLIGetStepsRemaining err=0 RemainingSteps=0 02:21:41 Filter is already there-color wheel unchanged 02:21:41 Received message from Master: op=Shutter serial=259193 02:21:41 Shutter LASER close 02:21:41 Received message from Camera: op=State serial=259195 02:21:41 GetSingleValue result=40 Value=cccccccc 02:21:41 SkyScan query 02:21:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:21:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:42 Parameters OK 02:21:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:42 Set A/D data flow result=40 02:21:42 Set A/D channel type result=40 02:21:42 Set A/D encoding result=40 02:21:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:42 Set channel filter=0.000000e+000 result=40 02:21:42 Config A/D Result=40 02:21:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:42 Get A/D filter: -9.255963e+061 result=40 02:21:42 Get A/D value=-858993460 result=40 02:21:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:42 Parameters OK 02:21:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:42 Set A/D data flow result=40 02:21:42 Set A/D channel type result=40 02:21:42 Set A/D encoding result=40 02:21:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:42 Set channel filter=0.000000e+000 result=40 02:21:42 Config A/D Result=40 02:21:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:42 Get A/D filter: -9.255963e+061 result=40 02:21:42 Get A/D value=-858993460 result=40 02:21:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:21:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:21:42 Aux= 02:21:42 Message to Camera, serial 259195 queued 02:22:19 Received message from Master: op=PointingHead serial=259208 02:22:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:22:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:22:19 Point started: ret=0 02:22:19 point_skyscan result=0 02:22:20 Check angles 02:22:20 SkyScan query 02:22:20 SkyScan query done: ret=0 az=134.475<-8965 ze=36.21<-9586 Statuses=0009 0009 02:22:20 Msec=0 True Az=134.475 Ze=36.21 Az status=0009 Ze status=0009 02:22:21 Check angles 02:22:21 SkyScan query 02:22:21 SkyScan query done: ret=0 az=117.045<-7803 ze=15.285<-10981 Statuses=0009 0009 02:22:21 Msec=750 True Az=117.045 Ze=15.285 Az status=0009 Ze status=0009 02:22:21 Check angles 02:22:21 SkyScan query 02:22:22 SkyScan query done: ret=0 az=99.6<-6640 ze=-5.685<-12379 Statuses=0009 0009 02:22:22 Msec=1500 True Az=99.6 Ze=-5.685 Az status=0009 Ze status=0009 02:22:22 Check angles 02:22:22 SkyScan query 02:22:23 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.67<-13778 Statuses=0009 0009 02:22:23 Msec=2250 True Az=82.125 Ze=-26.67 Az status=0009 Ze status=0009 02:22:23 Check angles 02:22:23 SkyScan query 02:22:23 SkyScan query done: ret=0 az=64.605<-4307 ze=-38.58<-14572 Statuses=0009 0008 02:22:23 Msec=3000 True Az=64.605 Ze=-38.58 Az status=0009 Ze status=0008 02:22:24 Check angles 02:22:24 SkyScan query 02:22:24 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.52<-14568 Statuses=0009 0008 02:22:24 Msec=3750 True Az=47.19 Ze=-38.52 Az status=0009 Ze status=0008 02:22:24 Check angles 02:22:24 SkyScan query 02:22:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:22:25 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:22:25 Message to Master queued w/err=0: serial=259208 error=0 02:22:30 Received message from Master: op=Filter serial=259209 02:22:30 Color wheel filter change from 0 to 0 02:22:30 FLIGetFilterPos err=0 currentPosition=0 02:22:30 FLIGetStepsRemaining err=0 RemainingSteps=0 02:22:30 Filter is already there-color wheel unchanged 02:22:30 Received message from Master: op=Shutter serial=259210 02:22:30 Shutter LASER close 02:22:30 Received message from Camera: op=State serial=259212 02:22:30 GetSingleValue result=40 Value=cccccccc 02:22:30 SkyScan query 02:22:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:22:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:31 Parameters OK 02:22:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:31 Set A/D data flow result=40 02:22:31 Set A/D channel type result=40 02:22:31 Set A/D encoding result=40 02:22:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:31 Set channel filter=0.000000e+000 result=40 02:22:31 Config A/D Result=40 02:22:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:31 Get A/D filter: -9.255963e+061 result=40 02:22:31 Get A/D value=-858993460 result=40 02:22:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:31 Parameters OK 02:22:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:31 Set A/D data flow result=40 02:22:31 Set A/D channel type result=40 02:22:31 Set A/D encoding result=40 02:22:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:31 Set channel filter=0.000000e+000 result=40 02:22:31 Config A/D Result=40 02:22:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:31 Get A/D filter: -9.255963e+061 result=40 02:22:31 Get A/D value=-858993460 result=40 02:22:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:22:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:22:31 Aux= 02:22:31 Message to Camera, serial 259212 queued 02:23:08 Received message from Master: op=PointingHead serial=259225 02:23:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:23:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:23:08 Point started: ret=0 02:23:08 point_skyscan result=0 02:23:09 Check angles 02:23:09 SkyScan query 02:23:09 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.52<-16568 Statuses=0009 0009 02:23:09 Msec=0 True Az=64.2 Ze=-68.52 Az status=0009 Ze status=0009 02:23:09 Check angles 02:23:09 SkyScan query 02:23:10 SkyScan query done: ret=0 az=82.095<-5473 ze=-89.91<-17994 Statuses=0009 0009 02:23:10 Msec=750 True Az=82.095 Ze=-89.91 Az status=0009 Ze status=0009 02:23:10 Check angles 02:23:10 SkyScan query 02:23:11 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.865<-19391 Statuses=0009 0009 02:23:11 Msec=1500 True Az=99.6 Ze=-110.865 Az status=0009 Ze status=0009 02:23:11 Check angles 02:23:11 SkyScan query 02:23:11 SkyScan query done: ret=0 az=116.865<-7791 ze=-131.805<-20787 Statuses=0009 0009 02:23:11 Msec=2250 True Az=116.865 Ze=-131.805 Az status=0009 Ze status=0009 02:23:12 Check angles 02:23:12 SkyScan query 02:23:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 02:23:12 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 02:23:12 Check angles 02:23:12 SkyScan query 02:23:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:23:13 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:23:13 Message to Master queued w/err=0: serial=259225 error=0 02:23:18 Received message from Master: op=Filter serial=259226 02:23:18 Color wheel filter change from 0 to 0 02:23:18 FLIGetFilterPos err=0 currentPosition=0 02:23:18 FLIGetStepsRemaining err=0 RemainingSteps=0 02:23:18 Filter is already there-color wheel unchanged 02:23:18 Received message from Master: op=Shutter serial=259227 02:23:18 Shutter LASER close 02:23:18 Received message from Camera: op=State serial=259229 02:23:18 GetSingleValue result=40 Value=cccccccc 02:23:18 SkyScan query 02:23:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:23:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:19 Parameters OK 02:23:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:19 Set A/D data flow result=40 02:23:19 Set A/D channel type result=40 02:23:19 Set A/D encoding result=40 02:23:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:19 Set channel filter=0.000000e+000 result=40 02:23:19 Config A/D Result=40 02:23:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:19 Get A/D filter: -9.255963e+061 result=40 02:23:19 Get A/D value=-858993460 result=40 02:23:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:19 Parameters OK 02:23:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:19 Set A/D data flow result=40 02:23:19 Set A/D channel type result=40 02:23:19 Set A/D encoding result=40 02:23:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:19 Set channel filter=0.000000e+000 result=40 02:23:19 Config A/D Result=40 02:23:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:19 Get A/D filter: -9.255963e+061 result=40 02:23:19 Get A/D value=-858993460 result=40 02:23:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:23:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:23:19 Aux= 02:23:19 Message to Camera, serial 259229 queued 02:23:56 Received message from Master: op=PointingHead serial=259242 02:23:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:23:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:23:56 Point started: ret=0 02:23:56 point_skyscan result=0 02:23:57 Check angles 02:23:57 SkyScan query 02:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.36<-23424 Statuses=0009 0009 02:23:57 Msec=0 True Az=112.995 Ze=-171.36 Az status=0009 Ze status=0009 02:23:57 Check angles 02:23:57 SkyScan query 02:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:23:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:23:58 Message to Master queued w/err=0: serial=259242 error=0 02:24:03 Received message from Master: op=Filter serial=259243 02:24:03 Color wheel filter change from 0 to 0 02:24:03 FLIGetFilterPos err=0 currentPosition=0 02:24:03 FLIGetStepsRemaining err=0 RemainingSteps=0 02:24:03 Filter is already there-color wheel unchanged 02:24:03 Received message from Master: op=Shutter serial=259244 02:24:03 Shutter LASER open 02:24:03 Received message from Camera: op=State serial=259246 02:24:03 GetSingleValue result=40 Value=cccccccc 02:24:03 SkyScan query 02:24:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:24:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:04 Parameters OK 02:24:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:04 Set A/D data flow result=40 02:24:04 Set A/D channel type result=40 02:24:04 Set A/D encoding result=40 02:24:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:04 Set channel filter=0.000000e+000 result=40 02:24:04 Config A/D Result=40 02:24:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:04 Get A/D filter: -9.255963e+061 result=40 02:24:04 Get A/D value=-858993460 result=40 02:24:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:04 Parameters OK 02:24:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:04 Set A/D data flow result=40 02:24:04 Set A/D channel type result=40 02:24:04 Set A/D encoding result=40 02:24:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:04 Set channel filter=0.000000e+000 result=40 02:24:04 Config A/D Result=40 02:24:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:04 Get A/D filter: -9.255963e+061 result=40 02:24:04 Get A/D value=-858993460 result=40 02:24:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:24:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:24:04 Aux= 02:24:04 Message to Camera, serial 259246 queued 02:24:12 Received message from Master: op=Shutter serial=259256 02:24:12 Shutter LASER close 02:24:13 Received message from Master: op=PointingHead serial=259260 02:24:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:24:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:24:13 Point started: ret=0 02:24:13 point_skyscan result=0 02:24:14 Check angles 02:24:14 SkyScan query 02:24:15 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.19<-21546 Statuses=0009 0009 02:24:15 Msec=0 True Az=135.99 Ze=-143.19 Az status=0009 Ze status=0009 02:24:15 Check angles 02:24:15 SkyScan query 02:24:15 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.205<-20147 Statuses=0009 0009 02:24:15 Msec=750 True Az=153.555 Ze=-122.205 Az status=0009 Ze status=0009 02:24:16 Check angles 02:24:16 SkyScan query 02:24:16 SkyScan query done: ret=0 az=170.94<-11396 ze=-101.325<-18755 Statuses=0009 0009 02:24:16 Msec=1500 True Az=170.94 Ze=-101.325 Az status=0009 Ze status=0009 02:24:16 Check angles 02:24:16 SkyScan query 02:24:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.37<-17358 Statuses=0008 0009 02:24:17 Msec=2250 True Az=176.01 Ze=-80.37 Az status=0008 Ze status=0009 02:24:17 Check angles 02:24:17 SkyScan query 02:24:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.4<-15960 Statuses=0008 0009 02:24:18 Msec=3000 True Az=176.01 Ze=-59.4 Az status=0008 Ze status=0009 02:24:18 Check angles 02:24:18 SkyScan query 02:24:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:24:18 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:24:18 Message to Master queued w/err=0: serial=259260 error=0 02:24:23 Received message from Master: op=Filter serial=259261 02:24:23 Color wheel filter change from 0 to 0 02:24:23 FLIGetFilterPos err=0 currentPosition=0 02:24:23 FLIGetStepsRemaining err=0 RemainingSteps=0 02:24:23 Filter is already there-color wheel unchanged 02:24:24 Received message from Master: op=Shutter serial=259262 02:24:24 Shutter LASER close 02:24:24 Received message from Camera: op=State serial=259264 02:24:24 GetSingleValue result=40 Value=cccccccc 02:24:24 SkyScan query 02:24:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:24:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:24 Parameters OK 02:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:24 Set A/D data flow result=40 02:24:24 Set A/D channel type result=40 02:24:24 Set A/D encoding result=40 02:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:24 Set channel filter=0.000000e+000 result=40 02:24:24 Config A/D Result=40 02:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:24 Get A/D filter: -9.255963e+061 result=40 02:24:24 Get A/D value=-858993460 result=40 02:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:24 Parameters OK 02:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:24 Set A/D data flow result=40 02:24:24 Set A/D channel type result=40 02:24:24 Set A/D encoding result=40 02:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:24 Set channel filter=0.000000e+000 result=40 02:24:24 Config A/D Result=40 02:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:24 Get A/D filter: -9.255963e+061 result=40 02:24:24 Get A/D value=-858993460 result=40 02:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:24:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:24:24 Aux= 02:24:24 Message to Camera, serial 259264 queued 02:25:01 Received message from Master: op=PointingHead serial=259277 02:25:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:25:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:25:02 Point started: ret=0 02:25:02 point_skyscan result=0 02:25:02 Check angles 02:25:02 SkyScan query 02:25:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.675<-13445 Statuses=0008 0009 02:25:03 Msec=0 True Az=175.995 Ze=-21.675 Az status=0008 Ze status=0009 02:25:03 Check angles 02:25:03 SkyScan query 02:25:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.27<-12018 Statuses=0008 0009 02:25:04 Msec=750 True Az=175.995 Ze=-0.27 Az status=0008 Ze status=0009 02:25:04 Check angles 02:25:04 SkyScan query 02:25:04 SkyScan query done: ret=0 az=175.995<-11733 ze=20.685<-10621 Statuses=0008 0009 02:25:04 Msec=1500 True Az=175.995 Ze=20.685 Az status=0008 Ze status=0009 02:25:05 Check angles 02:25:05 SkyScan query 02:25:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 02:25:05 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 02:25:05 Check angles 02:25:05 SkyScan query 02:25:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 02:25:06 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 02:25:06 Message to Master queued w/err=0: serial=259277 error=0 02:25:11 Received message from Master: op=Filter serial=259278 02:25:11 Color wheel filter change from 0 to 0 02:25:11 FLIGetFilterPos err=0 currentPosition=0 02:25:11 FLIGetStepsRemaining err=0 RemainingSteps=0 02:25:11 Filter is already there-color wheel unchanged 02:25:11 Received message from Master: op=Shutter serial=259279 02:25:11 Shutter LASER close 02:25:11 Received message from Camera: op=State serial=259281 02:25:11 GetSingleValue result=40 Value=cccccccc 02:25:11 SkyScan query 02:25:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:12 Parameters OK 02:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:12 Set A/D data flow result=40 02:25:12 Set A/D channel type result=40 02:25:12 Set A/D encoding result=40 02:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:12 Set channel filter=0.000000e+000 result=40 02:25:12 Config A/D Result=40 02:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:12 Get A/D filter: -9.255963e+061 result=40 02:25:12 Get A/D value=-858993460 result=40 02:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:12 Parameters OK 02:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:12 Set A/D data flow result=40 02:25:12 Set A/D channel type result=40 02:25:12 Set A/D encoding result=40 02:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:12 Set channel filter=0.000000e+000 result=40 02:25:12 Config A/D Result=40 02:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:12 Get A/D filter: -9.255963e+061 result=40 02:25:12 Get A/D value=-858993460 result=40 02:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:25:12 Aux= 02:25:12 Message to Camera, serial 259281 queued 02:25:49 Received message from Master: op=PointingHead serial=259294 02:25:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:25:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:25:49 Point started: ret=0 02:25:49 point_skyscan result=0 02:25:50 Check angles 02:25:50 SkyScan query 02:25:50 SkyScan query done: ret=0 az=152.475<-10165 ze=8.115<-11459 Statuses=0009 0009 02:25:50 Msec=0 True Az=152.475 Ze=8.115 Az status=0009 Ze status=0009 02:25:50 Check angles 02:25:50 SkyScan query 02:25:51 SkyScan query done: ret=0 az=134.595<-8973 ze=-13.185<-12879 Statuses=0009 0009 02:25:51 Msec=750 True Az=134.595 Ze=-13.185 Az status=0009 Ze status=0009 02:25:51 Check angles 02:25:51 SkyScan query 02:25:52 SkyScan query done: ret=0 az=117.165<-7811 ze=-34.185<-14279 Statuses=0009 0009 02:25:52 Msec=1500 True Az=117.165 Ze=-34.185 Az status=0009 Ze status=0009 02:25:52 Check angles 02:25:52 SkyScan query 02:25:53 SkyScan query done: ret=0 az=99.75<-6650 ze=-51.57<-15438 Statuses=0009 0009 02:25:53 Msec=2250 True Az=99.75 Ze=-51.57 Az status=0009 Ze status=0009 02:25:53 Check angles 02:25:53 SkyScan query [UTC 2018-12-19 02:25:53] 02:25:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 02:25:53 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 02:25:54 Check angles 02:25:54 SkyScan query 02:25:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:25:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:25:54 Message to Master queued w/err=0: serial=259294 error=0 02:25:59 Received message from Master: op=Filter serial=259295 02:25:59 Color wheel filter change from 0 to 0 02:25:59 FLIGetFilterPos err=0 currentPosition=0 02:25:59 FLIGetStepsRemaining err=0 RemainingSteps=0 02:25:59 Filter is already there-color wheel unchanged 02:25:59 Received message from Master: op=Shutter serial=259296 02:25:59 Shutter LASER close 02:25:59 Received message from Camera: op=State serial=259298 02:25:59 GetSingleValue result=40 Value=cccccccc 02:25:59 SkyScan query 02:26:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:26:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:00 Parameters OK 02:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:00 Set A/D data flow result=40 02:26:00 Set A/D channel type result=40 02:26:00 Set A/D encoding result=40 02:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:00 Set channel filter=0.000000e+000 result=40 02:26:00 Config A/D Result=40 02:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:00 Get A/D filter: -9.255963e+061 result=40 02:26:00 Get A/D value=-858993460 result=40 02:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:00 Parameters OK 02:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:00 Set A/D data flow result=40 02:26:00 Set A/D channel type result=40 02:26:00 Set A/D encoding result=40 02:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:00 Set channel filter=0.000000e+000 result=40 02:26:00 Config A/D Result=40 02:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:00 Get A/D filter: -9.255963e+061 result=40 02:26:00 Get A/D value=-858993460 result=40 02:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:26:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:26:00 Aux= 02:26:00 Message to Camera, serial 259298 queued 02:26:37 Received message from Master: op=PointingHead serial=259311 02:26:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:26:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:26:37 Point started: ret=0 02:26:37 point_skyscan result=0 02:26:38 Check angles 02:26:38 SkyScan query 02:26:38 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.12<-17408 Statuses=0009 0009 02:26:38 Msec=0 True Az=108.9 Ze=-81.12 Az status=0009 Ze status=0009 02:26:39 Check angles 02:26:39 SkyScan query 02:26:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 02:26:39 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 02:26:39 Check angles 02:26:39 SkyScan query 02:26:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 02:26:40 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 02:26:40 Check angles 02:26:40 SkyScan query 02:26:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 02:26:41 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 02:26:41 Check angles 02:26:41 SkyScan query 02:26:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.81<-23054 Statuses=0008 0009 02:26:41 Msec=3000 True Az=112.995 Ze=-165.81 Az status=0008 Ze status=0009 02:26:42 Check angles 02:26:42 SkyScan query 02:26:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:26:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:26:42 Message to Master queued w/err=0: serial=259311 error=0 02:26:47 Received message from Master: op=Filter serial=259312 02:26:47 Color wheel filter change from 0 to 0 02:26:47 FLIGetFilterPos err=0 currentPosition=0 02:26:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:26:47 Filter is already there-color wheel unchanged 02:26:47 Received message from Master: op=Shutter serial=259313 02:26:47 Shutter LASER open 02:26:48 Received message from Camera: op=State serial=259315 02:26:48 GetSingleValue result=40 Value=cccccccc 02:26:48 SkyScan query 02:26:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:26:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:48 Parameters OK 02:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:48 Set A/D data flow result=40 02:26:48 Set A/D channel type result=40 02:26:48 Set A/D encoding result=40 02:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:48 Set channel filter=0.000000e+000 result=40 02:26:48 Config A/D Result=40 02:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:48 Get A/D filter: -9.255963e+061 result=40 02:26:48 Get A/D value=-858993460 result=40 02:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:48 Parameters OK 02:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:48 Set A/D data flow result=40 02:26:48 Set A/D channel type result=40 02:26:48 Set A/D encoding result=40 02:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:48 Set channel filter=0.000000e+000 result=40 02:26:48 Config A/D Result=40 02:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:48 Get A/D filter: -9.255963e+061 result=40 02:26:48 Get A/D value=-858993460 result=40 02:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:26:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:26:48 Aux= 02:26:48 Message to Camera, serial 259315 queued 02:26:57 Received message from Master: op=Shutter serial=259325 02:26:57 Shutter LASER close 02:26:57 Received message from Master: op=PointingHead serial=259329 02:26:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:26:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:26:57 Point started: ret=0 02:26:57 point_skyscan result=0 02:26:58 Check angles 02:26:58 SkyScan query 02:26:59 SkyScan query done: ret=0 az=90.09<-6006 ze=157.455<-1503 Statuses=0009 0009 02:26:59 Msec=0 True Az=90.09 Ze=157.455 Az status=0009 Ze status=0009 02:26:59 Check angles 02:26:59 SkyScan query 02:26:59 SkyScan query done: ret=0 az=72.6<-4840 ze=136.47<-2902 Statuses=0009 0009 02:26:59 Msec=750 True Az=72.6 Ze=136.47 Az status=0009 Ze status=0009 02:27:00 Check angles 02:27:00 SkyScan query 02:27:00 SkyScan query done: ret=0 az=55.245<-3683 ze=115.575<-4295 Statuses=0009 0009 02:27:00 Msec=1500 True Az=55.245 Ze=115.575 Az status=0009 Ze status=0009 02:27:00 Check angles 02:27:00 SkyScan query 02:27:01 SkyScan query done: ret=0 az=41.025<-2735 ze=94.125<-5725 Statuses=0009 0009 02:27:01 Msec=2250 True Az=41.025 Ze=94.125 Az status=0009 Ze status=0009 02:27:01 Check angles 02:27:01 SkyScan query 02:27:02 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 02:27:02 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 02:27:02 Check angles 02:27:02 SkyScan query 02:27:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 02:27:02 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 02:27:03 Check angles 02:27:03 SkyScan query 02:27:03 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 02:27:03 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 02:27:03 Message to Master queued w/err=0: serial=259329 error=0 02:27:08 Received message from Master: op=Filter serial=259330 02:27:08 Color wheel filter change from 0 to 0 02:27:08 FLIGetFilterPos err=0 currentPosition=0 02:27:08 FLIGetStepsRemaining err=0 RemainingSteps=0 02:27:08 Filter is already there-color wheel unchanged 02:27:08 Received message from Master: op=Shutter serial=259331 02:27:08 Shutter LASER close 02:27:09 Received message from Camera: op=State serial=259333 02:27:09 GetSingleValue result=40 Value=cccccccc 02:27:09 SkyScan query 02:27:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:27:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:09 Parameters OK 02:27:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:09 Set A/D data flow result=40 02:27:09 Set A/D channel type result=40 02:27:09 Set A/D encoding result=40 02:27:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:09 Set channel filter=0.000000e+000 result=40 02:27:09 Config A/D Result=40 02:27:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:09 Get A/D filter: -9.255963e+061 result=40 02:27:09 Get A/D value=-858993460 result=40 02:27:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:09 Parameters OK 02:27:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:09 Set A/D data flow result=40 02:27:09 Set A/D channel type result=40 02:27:09 Set A/D encoding result=40 02:27:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:09 Set channel filter=0.000000e+000 result=40 02:27:09 Config A/D Result=40 02:27:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:09 Get A/D filter: -9.255963e+061 result=40 02:27:09 Get A/D value=-858993460 result=40 02:27:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:27:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:27:09 Aux= 02:27:09 Message to Camera, serial 259333 queued 02:27:46 Received message from Master: op=PointingHead serial=259346 02:27:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:27:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:27:46 Point started: ret=0 02:27:46 point_skyscan result=0 02:27:47 Check angles 02:27:47 SkyScan query 02:27:48 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 02:27:48 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 02:27:48 Check angles 02:27:48 SkyScan query 02:27:48 SkyScan query done: ret=0 az=81.33<-5422 ze=66.495<-7567 Statuses=0009 0008 02:27:48 Msec=750 True Az=81.33 Ze=66.495 Az status=0009 Ze status=0008 02:27:49 Check angles 02:27:49 SkyScan query 02:27:49 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 02:27:49 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 02:27:49 Check angles 02:27:49 SkyScan query 02:27:50 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 02:27:50 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 02:27:50 Check angles 02:27:50 SkyScan query 02:27:51 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 02:27:51 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 02:27:51 Check angles 02:27:51 SkyScan query 02:27:51 SkyScan query done: ret=0 az=151.965<-10131 ze=66.495<-7567 Statuses=0009 0008 02:27:51 Msec=3750 True Az=151.965 Ze=66.495 Az status=0009 Ze status=0008 02:27:52 Check angles 02:27:52 SkyScan query 02:27:52 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:27:52 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:27:52 Message to Master queued w/err=0: serial=259346 error=0 02:27:57 Received message from Master: op=Filter serial=259347 02:27:57 Color wheel filter change from 0 to 0 02:27:57 FLIGetFilterPos err=0 currentPosition=0 02:27:57 FLIGetStepsRemaining err=0 RemainingSteps=0 02:27:57 Filter is already there-color wheel unchanged 02:27:57 Received message from Master: op=Shutter serial=259348 02:27:57 Shutter LASER close 02:27:57 Received message from Camera: op=State serial=259350 02:27:57 GetSingleValue result=40 Value=cccccccc 02:27:57 SkyScan query 02:27:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:27:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:58 Parameters OK 02:27:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:58 Set A/D data flow result=40 02:27:58 Set A/D channel type result=40 02:27:58 Set A/D encoding result=40 02:27:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:58 Set channel filter=0.000000e+000 result=40 02:27:58 Config A/D Result=40 02:27:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:58 Get A/D filter: -9.255963e+061 result=40 02:27:58 Get A/D value=-858993460 result=40 02:27:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:58 Parameters OK 02:27:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:58 Set A/D data flow result=40 02:27:58 Set A/D channel type result=40 02:27:58 Set A/D encoding result=40 02:27:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:58 Set channel filter=0.000000e+000 result=40 02:27:58 Config A/D Result=40 02:27:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:58 Get A/D filter: -9.255963e+061 result=40 02:27:58 Get A/D value=-858993460 result=40 02:27:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:27:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:27:58 Aux= 02:27:58 Message to Camera, serial 259350 queued 02:28:35 Received message from Master: op=PointingHead serial=259363 02:28:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:28:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:28:35 Point started: ret=0 02:28:35 point_skyscan result=0 02:28:36 Check angles 02:28:36 SkyScan query 02:28:37 SkyScan query done: ret=0 az=134.985<-8999 ze=36.735<-9551 Statuses=0009 0009 02:28:37 Msec=0 True Az=134.985 Ze=36.735 Az status=0009 Ze status=0009 02:28:37 Check angles 02:28:37 SkyScan query 02:28:37 SkyScan query done: ret=0 az=117.075<-7805 ze=15.375<-10975 Statuses=0009 0009 02:28:37 Msec=750 True Az=117.075 Ze=15.375 Az status=0009 Ze status=0009 02:28:37 Check angles 02:28:37 SkyScan query 02:28:38 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.61<-12374 Statuses=0009 0009 02:28:38 Msec=1500 True Az=99.66 Ze=-5.61 Az status=0009 Ze status=0009 02:28:38 Check angles 02:28:38 SkyScan query 02:28:39 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.595<-13773 Statuses=0009 0009 02:28:39 Msec=2250 True Az=82.23 Ze=-26.595 Az status=0009 Ze status=0009 02:28:39 Check angles 02:28:39 SkyScan query 02:28:40 SkyScan query done: ret=0 az=64.365<-4291 ze=-38.58<-14572 Statuses=0009 0008 02:28:40 Msec=3000 True Az=64.365 Ze=-38.58 Az status=0009 Ze status=0008 02:28:40 Check angles 02:28:40 SkyScan query 02:28:40 SkyScan query done: ret=0 az=46.95<-3130 ze=-38.52<-14568 Statuses=0009 0008 02:28:40 Msec=3750 True Az=46.95 Ze=-38.52 Az status=0009 Ze status=0008 02:28:40 Check angles 02:28:40 SkyScan query 02:28:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:28:41 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:28:41 Message to Master queued w/err=0: serial=259363 error=0 02:28:46 Received message from Master: op=Filter serial=259364 02:28:46 Color wheel filter change from 0 to 0 02:28:46 FLIGetFilterPos err=0 currentPosition=0 02:28:46 FLIGetStepsRemaining err=0 RemainingSteps=0 02:28:46 Filter is already there-color wheel unchanged 02:28:46 Received message from Master: op=Shutter serial=259365 02:28:46 Shutter LASER close 02:28:46 Received message from Camera: op=State serial=259367 02:28:46 GetSingleValue result=40 Value=cccccccc 02:28:46 SkyScan query 02:28:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:28:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:47 Parameters OK 02:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:47 Set A/D data flow result=40 02:28:47 Set A/D channel type result=40 02:28:47 Set A/D encoding result=40 02:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:47 Set channel filter=0.000000e+000 result=40 02:28:47 Config A/D Result=40 02:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:47 Get A/D filter: -9.255963e+061 result=40 02:28:47 Get A/D value=-858993460 result=40 02:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:47 Parameters OK 02:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:47 Set A/D data flow result=40 02:28:47 Set A/D channel type result=40 02:28:47 Set A/D encoding result=40 02:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:47 Set channel filter=0.000000e+000 result=40 02:28:47 Config A/D Result=40 02:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:47 Get A/D filter: -9.255963e+061 result=40 02:28:47 Get A/D value=-858993460 result=40 02:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:28:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:28:47 Aux= 02:28:47 Message to Camera, serial 259367 queued 02:29:24 Received message from Master: op=PointingHead serial=259380 02:29:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:29:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:29:24 Point started: ret=0 02:29:24 point_skyscan result=0 02:29:25 Check angles 02:29:25 SkyScan query 02:29:25 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.175<-16545 Statuses=0009 0009 02:29:25 Msec=0 True Az=63.945 Ze=-68.175 Az status=0009 Ze status=0009 02:29:26 Check angles 02:29:26 SkyScan query 02:29:26 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.16<-17944 Statuses=0009 0009 02:29:26 Msec=750 True Az=81.33 Ze=-89.16 Az status=0009 Ze status=0009 02:29:26 Check angles 02:29:26 SkyScan query 02:29:27 SkyScan query done: ret=0 az=98.835<-6589 ze=-110.1<-19340 Statuses=0009 0009 02:29:27 Msec=1500 True Az=98.835 Ze=-110.1 Az status=0009 Ze status=0009 02:29:27 Check angles 02:29:27 SkyScan query 02:29:28 SkyScan query done: ret=0 az=116.325<-7755 ze=-131.055<-20737 Statuses=0009 0009 02:29:28 Msec=2250 True Az=116.325 Ze=-131.055 Az status=0009 Ze status=0009 02:29:28 Check angles 02:29:28 SkyScan query 02:29:28 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 02:29:28 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 02:29:29 Check angles 02:29:29 SkyScan query 02:29:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:29:29 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:29:29 Message to Master queued w/err=0: serial=259380 error=0 02:29:34 Received message from Master: op=Filter serial=259381 02:29:34 Color wheel filter change from 0 to 0 02:29:34 FLIGetFilterPos err=0 currentPosition=0 02:29:34 FLIGetStepsRemaining err=0 RemainingSteps=0 02:29:34 Filter is already there-color wheel unchanged 02:29:34 Received message from Master: op=Shutter serial=259382 02:29:34 Shutter LASER close 02:29:34 Received message from Camera: op=State serial=259384 02:29:34 GetSingleValue result=40 Value=cccccccc 02:29:34 SkyScan query 02:29:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:29:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:35 Parameters OK 02:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:35 Set A/D data flow result=40 02:29:35 Set A/D channel type result=40 02:29:35 Set A/D encoding result=40 02:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:35 Set channel filter=0.000000e+000 result=40 02:29:35 Config A/D Result=40 02:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:35 Get A/D filter: -9.255963e+061 result=40 02:29:35 Get A/D value=-858993460 result=40 02:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:35 Parameters OK 02:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:35 Set A/D data flow result=40 02:29:35 Set A/D channel type result=40 02:29:35 Set A/D encoding result=40 02:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:35 Set channel filter=0.000000e+000 result=40 02:29:35 Config A/D Result=40 02:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:35 Get A/D filter: -9.255963e+061 result=40 02:29:35 Get A/D value=-858993460 result=40 02:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:29:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:29:35 Aux= 02:29:35 Message to Camera, serial 259384 queued 02:30:12 Received message from Master: op=PointingHead serial=259397 02:30:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:30:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:30:12 Point started: ret=0 02:30:12 point_skyscan result=0 02:30:13 Check angles 02:30:13 SkyScan query 02:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0009 0009 02:30:13 Msec=0 True Az=112.995 Ze=-170.895 Az status=0009 Ze status=0009 02:30:14 Check angles 02:30:14 SkyScan query 02:30:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:30:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:30:14 Message to Master queued w/err=0: serial=259397 error=0 02:30:19 Received message from Master: op=Filter serial=259398 02:30:19 Color wheel filter change from 0 to 0 02:30:19 FLIGetFilterPos err=0 currentPosition=0 02:30:19 FLIGetStepsRemaining err=0 RemainingSteps=0 02:30:19 Filter is already there-color wheel unchanged 02:30:19 Received message from Master: op=Shutter serial=259399 02:30:19 Shutter LASER open 02:30:20 Received message from Camera: op=State serial=259401 02:30:20 GetSingleValue result=40 Value=cccccccc 02:30:20 SkyScan query 02:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:30:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:20 Parameters OK 02:30:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:20 Set A/D data flow result=40 02:30:20 Set A/D channel type result=40 02:30:20 Set A/D encoding result=40 02:30:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:20 Set channel filter=0.000000e+000 result=40 02:30:20 Config A/D Result=40 02:30:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:20 Get A/D filter: -9.255963e+061 result=40 02:30:20 Get A/D value=-858993460 result=40 02:30:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:20 Parameters OK 02:30:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:20 Set A/D data flow result=40 02:30:20 Set A/D channel type result=40 02:30:20 Set A/D encoding result=40 02:30:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:20 Set channel filter=0.000000e+000 result=40 02:30:20 Config A/D Result=40 02:30:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:20 Get A/D filter: -9.255963e+061 result=40 02:30:20 Get A/D value=-858993460 result=40 02:30:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:30:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:30:20 Aux= 02:30:20 Message to Camera, serial 259401 queued 02:30:29 Received message from Master: op=Shutter serial=259411 02:30:29 Shutter LASER close 02:30:29 Received message from Master: op=PointingHead serial=259415 02:30:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:30:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:30:29 Point started: ret=0 02:30:29 point_skyscan result=0 02:30:30 Check angles 02:30:30 SkyScan query 02:30:31 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.25<-21550 Statuses=0009 0009 02:30:31 Msec=0 True Az=135.975 Ze=-143.25 Az status=0009 Ze status=0009 02:30:31 Check angles 02:30:31 SkyScan query 02:30:32 SkyScan query done: ret=0 az=153.915<-10261 ze=-121.845<-20123 Statuses=0009 0009 02:30:32 Msec=750 True Az=153.915 Ze=-121.845 Az status=0009 Ze status=0009 02:30:32 Check angles 02:30:32 SkyScan query 02:30:32 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.83<-18722 Statuses=0009 0009 02:30:32 Msec=1500 True Az=171.36 Ze=-100.83 Az status=0009 Ze status=0009 02:30:33 Check angles 02:30:33 SkyScan query 02:30:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.95<-17330 Statuses=0008 0009 02:30:33 Msec=2250 True Az=176.01 Ze=-79.95 Az status=0008 Ze status=0009 02:30:33 Check angles 02:30:33 SkyScan query 02:30:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.47<-15898 Statuses=0008 0009 02:30:34 Msec=3000 True Az=176.01 Ze=-58.47 Az status=0008 Ze status=0009 02:30:34 Check angles 02:30:34 SkyScan query 02:30:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:30:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:30:35 Message to Master queued w/err=0: serial=259415 error=0 02:30:40 Received message from Master: op=Filter serial=259416 02:30:40 Color wheel filter change from 0 to 0 02:30:40 FLIGetFilterPos err=0 currentPosition=0 02:30:40 FLIGetStepsRemaining err=0 RemainingSteps=0 02:30:40 Filter is already there-color wheel unchanged 02:30:40 Received message from Master: op=Shutter serial=259417 02:30:40 Shutter LASER close 02:30:40 Received message from Camera: op=State serial=259419 02:30:40 GetSingleValue result=40 Value=cccccccc 02:30:40 SkyScan query 02:30:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:30:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:41 Parameters OK 02:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:41 Set A/D data flow result=40 02:30:41 Set A/D channel type result=40 02:30:41 Set A/D encoding result=40 02:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:41 Set channel filter=0.000000e+000 result=40 02:30:41 Config A/D Result=40 02:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:41 Get A/D filter: -9.255963e+061 result=40 02:30:41 Get A/D value=-858993460 result=40 02:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:41 Parameters OK 02:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:41 Set A/D data flow result=40 02:30:41 Set A/D channel type result=40 02:30:41 Set A/D encoding result=40 02:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:41 Set channel filter=0.000000e+000 result=40 02:30:41 Config A/D Result=40 02:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:41 Get A/D filter: -9.255963e+061 result=40 02:30:41 Get A/D value=-858993460 result=40 02:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:30:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:30:41 Aux= 02:30:41 Message to Camera, serial 259419 queued 02:31:18 Received message from Master: op=PointingHead serial=259432 02:31:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:31:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:31:18 Point started: ret=0 02:31:18 point_skyscan result=0 02:31:19 Check angles 02:31:19 SkyScan query 02:31:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.735<-13449 Statuses=0008 0009 02:31:19 Msec=0 True Az=175.995 Ze=-21.735 Az status=0008 Ze status=0009 02:31:19 Check angles 02:31:19 SkyScan query 02:31:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.705<-12047 Statuses=0008 0009 02:31:20 Msec=750 True Az=175.995 Ze=-0.705 Az status=0008 Ze status=0009 02:31:20 Check angles 02:31:20 SkyScan query 02:31:21 SkyScan query done: ret=0 az=175.995<-11733 ze=20.19<-10654 Statuses=0008 0009 02:31:21 Msec=1500 True Az=175.995 Ze=20.19 Az status=0008 Ze status=0009 02:31:21 Check angles 02:31:21 SkyScan query 02:31:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.565<-9429 Statuses=0008 0009 02:31:21 Msec=2250 True Az=175.995 Ze=38.565 Az status=0008 Ze status=0009 02:31:22 Check angles 02:31:22 SkyScan query 02:31:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 02:31:22 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 02:31:22 Message to Master queued w/err=0: serial=259432 error=0 02:31:27 Received message from Master: op=Filter serial=259433 02:31:27 Color wheel filter change from 0 to 0 02:31:27 FLIGetFilterPos err=0 currentPosition=0 02:31:27 FLIGetStepsRemaining err=0 RemainingSteps=0 02:31:27 Filter is already there-color wheel unchanged 02:31:27 Received message from Master: op=Shutter serial=259434 02:31:27 Shutter LASER close 02:31:27 Received message from Camera: op=State serial=259436 02:31:27 GetSingleValue result=40 Value=cccccccc 02:31:27 SkyScan query 02:31:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:31:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:28 Parameters OK 02:31:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:28 Set A/D data flow result=40 02:31:28 Set A/D channel type result=40 02:31:28 Set A/D encoding result=40 02:31:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:28 Set channel filter=0.000000e+000 result=40 02:31:28 Config A/D Result=40 02:31:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:28 Get A/D filter: -9.255963e+061 result=40 02:31:28 Get A/D value=-858993460 result=40 02:31:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:28 Parameters OK 02:31:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:28 Set A/D data flow result=40 02:31:28 Set A/D channel type result=40 02:31:28 Set A/D encoding result=40 02:31:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:28 Set channel filter=0.000000e+000 result=40 02:31:28 Config A/D Result=40 02:31:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:28 Get A/D filter: -9.255963e+061 result=40 02:31:28 Get A/D value=-858993460 result=40 02:31:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:31:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:31:28 Aux= 02:31:28 Message to Camera, serial 259436 queued 02:32:05 Received message from Master: op=PointingHead serial=259449 02:32:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:32:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:32:05 Point started: ret=0 02:32:05 point_skyscan result=0 02:32:06 Check angles 02:32:06 SkyScan query 02:32:07 SkyScan query done: ret=0 az=152.91<-10194 ze=8.745<-11417 Statuses=0009 0009 02:32:07 Msec=0 True Az=152.91 Ze=8.745 Az status=0009 Ze status=0009 02:32:07 Check angles 02:32:07 SkyScan query 02:32:07 SkyScan query done: ret=0 az=135.075<-9005 ze=-12.6<-12840 Statuses=0009 0009 02:32:07 Msec=750 True Az=135.075 Ze=-12.6 Az status=0009 Ze status=0009 02:32:07 Check angles 02:32:07 SkyScan query 02:32:08 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.615<-14241 Statuses=0009 0009 02:32:08 Msec=1500 True Az=117.585 Ze=-33.615 Az status=0009 Ze status=0009 02:32:08 Check angles 02:32:08 SkyScan query 02:32:09 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 02:32:09 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 02:32:09 Check angles 02:32:09 SkyScan query 02:32:10 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 02:32:10 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 02:32:10 Check angles 02:32:10 SkyScan query 02:32:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:32:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:32:10 Message to Master queued w/err=0: serial=259449 error=0 02:32:15 Received message from Master: op=Filter serial=259450 02:32:15 Color wheel filter change from 0 to 0 02:32:15 FLIGetFilterPos err=0 currentPosition=0 02:32:15 FLIGetStepsRemaining err=0 RemainingSteps=0 02:32:15 Filter is already there-color wheel unchanged 02:32:16 Received message from Master: op=Shutter serial=259451 02:32:16 Shutter LASER close 02:32:16 Received message from Camera: op=State serial=259453 02:32:16 GetSingleValue result=40 Value=cccccccc 02:32:16 SkyScan query 02:32:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:32:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:16 Parameters OK 02:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:16 Set A/D data flow result=40 02:32:16 Set A/D channel type result=40 02:32:16 Set A/D encoding result=40 02:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:16 Set channel filter=0.000000e+000 result=40 02:32:16 Config A/D Result=40 02:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:16 Get A/D filter: -9.255963e+061 result=40 02:32:16 Get A/D value=-858993460 result=40 02:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:16 Parameters OK 02:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:16 Set A/D data flow result=40 02:32:16 Set A/D channel type result=40 02:32:16 Set A/D encoding result=40 02:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:16 Set channel filter=0.000000e+000 result=40 02:32:16 Config A/D Result=40 02:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:16 Get A/D filter: -9.255963e+061 result=40 02:32:16 Get A/D value=-858993460 result=40 02:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:32:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:32:16 Aux= 02:32:16 Message to Camera, serial 259453 queued 02:32:52 Received message from Master: op=PointingHead serial=259465 02:32:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:32:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:32:52 Point started: ret=0 02:32:52 point_skyscan result=0 02:32:53 Check angles 02:32:53 SkyScan query 02:32:54 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.285<-17419 Statuses=0009 0009 02:32:54 Msec=0 True Az=109.035 Ze=-81.285 Az status=0009 Ze status=0009 02:32:54 Check angles 02:32:54 SkyScan query 02:32:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 02:32:54 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 02:32:55 Check angles 02:32:55 SkyScan query 02:32:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 02:32:55 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 02:32:55 Check angles 02:32:55 SkyScan query 02:32:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 02:32:56 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 02:32:56 Check angles 02:32:56 SkyScan query 02:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 02:32:57 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 02:32:57 Check angles 02:32:57 SkyScan query 02:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:32:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:32:57 Message to Master queued w/err=0: serial=259465 error=0 02:33:02 Received message from Master: op=Filter serial=259466 02:33:02 Color wheel filter change from 0 to 0 02:33:02 FLIGetFilterPos err=0 currentPosition=0 02:33:02 FLIGetStepsRemaining err=0 RemainingSteps=0 02:33:02 Filter is already there-color wheel unchanged 02:33:03 Received message from Master: op=Shutter serial=259467 02:33:03 Shutter LASER open 02:33:03 Received message from Camera: op=State serial=259469 02:33:03 GetSingleValue result=40 Value=cccccccc 02:33:03 SkyScan query 02:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:33:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:03 Parameters OK 02:33:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:03 Set A/D data flow result=40 02:33:03 Set A/D channel type result=40 02:33:03 Set A/D encoding result=40 02:33:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:03 Set channel filter=0.000000e+000 result=40 02:33:03 Config A/D Result=40 02:33:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:03 Get A/D filter: -9.255963e+061 result=40 02:33:03 Get A/D value=-858993460 result=40 02:33:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:03 Parameters OK 02:33:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:03 Set A/D data flow result=40 02:33:03 Set A/D channel type result=40 02:33:03 Set A/D encoding result=40 02:33:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:03 Set channel filter=0.000000e+000 result=40 02:33:03 Config A/D Result=40 02:33:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:03 Get A/D filter: -9.255963e+061 result=40 02:33:03 Get A/D value=-858993460 result=40 02:33:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:33:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:33:03 Aux= 02:33:03 Message to Camera, serial 259469 queued 02:33:12 Received message from Master: op=Shutter serial=259479 02:33:12 Shutter LASER close 02:33:12 Received message from Master: op=PointingHead serial=259483 02:33:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:33:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:33:13 Point started: ret=0 02:33:13 point_skyscan result=0 02:33:13 Check angles 02:33:13 SkyScan query 02:33:14 SkyScan query done: ret=0 az=89.55<-5970 ze=156.765<-1549 Statuses=0009 0009 02:33:14 Msec=0 True Az=89.55 Ze=156.765 Az status=0009 Ze status=0009 02:33:14 Check angles 02:33:14 SkyScan query 02:33:15 SkyScan query done: ret=0 az=71.64<-4776 ze=135.39<-2974 Statuses=0009 0009 02:33:15 Msec=750 True Az=71.64 Ze=135.39 Az status=0009 Ze status=0009 02:33:15 Check angles 02:33:15 SkyScan query 02:33:15 SkyScan query done: ret=0 az=54.24<-3616 ze=114.405<-4373 Statuses=0009 0009 02:33:15 Msec=1500 True Az=54.24 Ze=114.405 Az status=0009 Ze status=0009 02:33:16 Check angles 02:33:16 SkyScan query 02:33:16 SkyScan query done: ret=0 az=40.98<-2732 ze=93.48<-5768 Statuses=0009 0009 02:33:16 Msec=2250 True Az=40.98 Ze=93.48 Az status=0009 Ze status=0009 02:33:16 Check angles 02:33:16 SkyScan query 02:33:17 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 02:33:17 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 02:33:17 Check angles 02:33:17 SkyScan query 02:33:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 02:33:18 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 02:33:18 Check angles 02:33:18 SkyScan query 02:33:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:33:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:33:18 Message to Master queued w/err=0: serial=259483 error=0 02:33:23 Received message from Master: op=Filter serial=259484 02:33:23 Color wheel filter change from 0 to 0 02:33:23 FLIGetFilterPos err=0 currentPosition=0 02:33:23 FLIGetStepsRemaining err=0 RemainingSteps=0 02:33:23 Filter is already there-color wheel unchanged 02:33:24 Received message from Master: op=Shutter serial=259485 02:33:24 Shutter LASER close 02:33:24 Received message from Camera: op=State serial=259487 02:33:24 GetSingleValue result=40 Value=cccccccc 02:33:24 SkyScan query 02:33:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:33:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:24 Parameters OK 02:33:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:24 Set A/D data flow result=40 02:33:24 Set A/D channel type result=40 02:33:24 Set A/D encoding result=40 02:33:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:24 Set channel filter=0.000000e+000 result=40 02:33:24 Config A/D Result=40 02:33:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:24 Get A/D filter: -9.255963e+061 result=40 02:33:24 Get A/D value=-858993460 result=40 02:33:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:24 Parameters OK 02:33:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:24 Set A/D data flow result=40 02:33:24 Set A/D channel type result=40 02:33:24 Set A/D encoding result=40 02:33:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:24 Set channel filter=0.000000e+000 result=40 02:33:24 Config A/D Result=40 02:33:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:24 Get A/D filter: -9.255963e+061 result=40 02:33:24 Get A/D value=-858993460 result=40 02:33:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:33:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:33:24 Aux= 02:33:24 Message to Camera, serial 259487 queued 02:34:01 Received message from Master: op=PointingHead serial=259500 02:34:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:34:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:34:02 Point started: ret=0 02:34:02 point_skyscan result=0 02:34:02 Check angles 02:34:02 SkyScan query 02:34:03 SkyScan query done: ret=0 az=64.05<-4270 ze=66.555<-7563 Statuses=0009 0008 02:34:03 Msec=0 True Az=64.05 Ze=66.555 Az status=0009 Ze status=0008 02:34:03 Check angles 02:34:03 SkyScan query 02:34:04 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 02:34:04 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 02:34:04 Check angles 02:34:04 SkyScan query 02:34:04 SkyScan query done: ret=0 az=98.985<-6599 ze=66.495<-7567 Statuses=0009 0008 02:34:04 Msec=1500 True Az=98.985 Ze=66.495 Az status=0009 Ze status=0008 02:34:05 Check angles 02:34:05 SkyScan query 02:34:05 SkyScan query done: ret=0 az=116.355<-7757 ze=66.495<-7567 Statuses=0009 0008 02:34:05 Msec=2250 True Az=116.355 Ze=66.495 Az status=0009 Ze status=0008 02:34:05 Check angles 02:34:05 SkyScan query 02:34:06 SkyScan query done: ret=0 az=133.785<-8919 ze=66.495<-7567 Statuses=0009 0008 02:34:06 Msec=3000 True Az=133.785 Ze=66.495 Az status=0009 Ze status=0008 02:34:06 Check angles 02:34:06 SkyScan query 02:34:07 SkyScan query done: ret=0 az=151.305<-10087 ze=66.495<-7567 Statuses=0009 0008 02:34:07 Msec=3750 True Az=151.305 Ze=66.495 Az status=0009 Ze status=0008 02:34:07 Check angles 02:34:07 SkyScan query 02:34:07 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:34:07 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:34:07 Message to Master queued w/err=0: serial=259500 error=0 02:34:12 Received message from Master: op=Filter serial=259501 02:34:12 Color wheel filter change from 0 to 0 02:34:12 FLIGetFilterPos err=0 currentPosition=0 02:34:12 FLIGetStepsRemaining err=0 RemainingSteps=0 02:34:12 Filter is already there-color wheel unchanged 02:34:13 Received message from Master: op=Shutter serial=259502 02:34:13 Shutter LASER close 02:34:13 Received message from Camera: op=State serial=259504 02:34:13 GetSingleValue result=40 Value=cccccccc 02:34:13 SkyScan query 02:34:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:34:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:34:13 Parameters OK 02:34:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:34:13 Set A/D data flow result=40 02:34:13 Set A/D channel type result=40 02:34:13 Set A/D encoding result=40 02:34:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:34:13 Set channel filter=0.000000e+000 result=40 02:34:13 Config A/D Result=40 02:34:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:34:13 Get A/D filter: -9.255963e+061 result=40 02:34:13 Get A/D value=-858993460 result=40 02:34:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:34:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:34:13 Parameters OK 02:34:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:34:13 Set A/D data flow result=40 02:34:13 Set A/D channel type result=40 02:34:13 Set A/D encoding result=40 02:34:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:34:13 Set channel filter=0.000000e+000 result=40 02:34:13 Config A/D Result=40 02:34:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:34:13 Get A/D filter: -9.255963e+061 result=40 02:34:13 Get A/D value=-858993460 result=40 02:34:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:34:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:34:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:34:13 Aux= 02:34:13 Message to Camera, serial 259504 queued 02:34:50 Received message from Master: op=PointingHead serial=259517 02:34:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:34:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:34:50 Point started: ret=0 02:34:50 point_skyscan result=0 02:34:51 Check angles 02:34:51 SkyScan query 02:34:52 SkyScan query done: ret=0 az=134.82<-8988 ze=36.63<-9558 Statuses=0009 0009 02:34:52 Msec=0 True Az=134.82 Ze=36.63 Az status=0009 Ze status=0009 02:34:52 Check angles 02:34:52 SkyScan query 02:34:52 SkyScan query done: ret=0 az=117.45<-7830 ze=15.675<-10955 Statuses=0009 0009 02:34:52 Msec=750 True Az=117.45 Ze=15.675 Az status=0009 Ze status=0009 02:34:53 Check angles 02:34:53 SkyScan query 02:34:53 SkyScan query done: ret=0 az=100.08<-6672 ze=-5.28<-12352 Statuses=0009 0009 02:34:53 Msec=1500 True Az=100.08 Ze=-5.28 Az status=0009 Ze status=0009 02:34:53 Check angles 02:34:53 SkyScan query 02:34:54 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.25<-13750 Statuses=0009 0009 02:34:54 Msec=2250 True Az=82.455 Ze=-26.25 Az status=0009 Ze status=0009 02:34:54 Check angles 02:34:54 SkyScan query 02:34:55 SkyScan query done: ret=0 az=65.1<-4340 ze=-38.58<-14572 Statuses=0009 0008 02:34:55 Msec=3000 True Az=65.1 Ze=-38.58 Az status=0009 Ze status=0008 02:34:55 Check angles 02:34:55 SkyScan query 02:34:55 SkyScan query done: ret=0 az=47.205<-3147 ze=-38.52<-14568 Statuses=0009 0008 02:34:55 Msec=3750 True Az=47.205 Ze=-38.52 Az status=0009 Ze status=0008 02:34:56 Check angles 02:34:56 SkyScan query 02:34:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:34:56 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:34:56 Message to Master queued w/err=0: serial=259517 error=0 02:35:01 Received message from Master: op=Filter serial=259518 02:35:01 Color wheel filter change from 0 to 0 02:35:01 FLIGetFilterPos err=0 currentPosition=0 02:35:01 FLIGetStepsRemaining err=0 RemainingSteps=0 02:35:01 Filter is already there-color wheel unchanged 02:35:01 Received message from Master: op=Shutter serial=259519 02:35:01 Shutter LASER close 02:35:01 Received message from Camera: op=State serial=259521 02:35:01 GetSingleValue result=40 Value=cccccccc 02:35:01 SkyScan query 02:35:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:35:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:02 Parameters OK 02:35:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:02 Set A/D data flow result=40 02:35:02 Set A/D channel type result=40 02:35:02 Set A/D encoding result=40 02:35:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:02 Set channel filter=0.000000e+000 result=40 02:35:02 Config A/D Result=40 02:35:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:02 Get A/D filter: -9.255963e+061 result=40 02:35:02 Get A/D value=-858993460 result=40 02:35:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:02 Parameters OK 02:35:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:02 Set A/D data flow result=40 02:35:02 Set A/D channel type result=40 02:35:02 Set A/D encoding result=40 02:35:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:02 Set channel filter=0.000000e+000 result=40 02:35:02 Config A/D Result=40 02:35:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:02 Get A/D filter: -9.255963e+061 result=40 02:35:02 Get A/D value=-858993460 result=40 02:35:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:35:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:35:02 Aux= 02:35:02 Message to Camera, serial 259521 queued 02:35:39 Received message from Master: op=PointingHead serial=259534 02:35:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:35:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:35:39 Point started: ret=0 02:35:39 point_skyscan result=0 02:35:40 Check angles 02:35:40 SkyScan query 02:35:40 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.145<-16543 Statuses=0009 0009 02:35:40 Msec=0 True Az=63.885 Ze=-68.145 Az status=0009 Ze status=0009 02:35:41 Check angles 02:35:41 SkyScan query 02:35:41 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.145<-17943 Statuses=0009 0009 02:35:41 Msec=750 True Az=81.33 Ze=-89.145 Az status=0009 Ze status=0009 02:35:41 Check angles 02:35:41 SkyScan query 02:35:42 SkyScan query done: ret=0 az=98.805<-6587 ze=-110.055<-19337 Statuses=0009 0009 02:35:42 Msec=1500 True Az=98.805 Ze=-110.055 Az status=0009 Ze status=0009 02:35:42 Check angles [UTC 2018-12-19 02:35:42] 02:35:42 SkyScan query 02:35:43 SkyScan query done: ret=0 az=118.17<-7878 ze=-133.215<-20881 Statuses=0009 0009 02:35:43 Msec=2250 True Az=118.17 Ze=-133.215 Az status=0009 Ze status=0009 02:35:43 Check angles 02:35:43 SkyScan query 02:35:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 02:35:44 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 02:35:44 Check angles 02:35:44 SkyScan query 02:35:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:35:44 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:35:44 Message to Master queued w/err=0: serial=259534 error=0 02:35:49 Received message from Master: op=Filter serial=259535 02:35:49 Color wheel filter change from 0 to 0 02:35:49 FLIGetFilterPos err=0 currentPosition=0 02:35:49 FLIGetStepsRemaining err=0 RemainingSteps=0 02:35:49 Filter is already there-color wheel unchanged 02:35:49 Received message from Master: op=Shutter serial=259536 02:35:49 Shutter LASER close 02:35:49 Received message from Camera: op=State serial=259538 02:35:49 GetSingleValue result=40 Value=cccccccc 02:35:49 SkyScan query 02:35:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:35:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:50 Parameters OK 02:35:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:50 Set A/D data flow result=40 02:35:50 Set A/D channel type result=40 02:35:50 Set A/D encoding result=40 02:35:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:50 Set channel filter=0.000000e+000 result=40 02:35:50 Config A/D Result=40 02:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:50 Get A/D filter: -9.255963e+061 result=40 02:35:50 Get A/D value=-858993460 result=40 02:35:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:50 Parameters OK 02:35:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:50 Set A/D data flow result=40 02:35:50 Set A/D channel type result=40 02:35:50 Set A/D encoding result=40 02:35:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:50 Set channel filter=0.000000e+000 result=40 02:35:50 Config A/D Result=40 02:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:50 Get A/D filter: -9.255963e+061 result=40 02:35:50 Get A/D value=-858993460 result=40 02:35:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:35:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:35:50 Aux= 02:35:50 Message to Camera, serial 259538 queued [UTC 2018-12-19 02:35:52] 02:36:26 Received message from Master: op=PointingHead serial=259550 02:36:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:36:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:36:26 Point started: ret=0 02:36:26 point_skyscan result=0 02:36:27 Check angles 02:36:27 SkyScan query 02:36:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 02:36:28 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 02:36:28 Check angles 02:36:28 SkyScan query 02:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:36:28 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:36:28 Message to Master queued w/err=0: serial=259550 error=0 02:36:33 Received message from Master: op=Filter serial=259551 02:36:33 Color wheel filter change from 0 to 0 02:36:33 FLIGetFilterPos err=0 currentPosition=0 02:36:33 FLIGetStepsRemaining err=0 RemainingSteps=0 02:36:33 Filter is already there-color wheel unchanged 02:36:34 Received message from Master: op=Shutter serial=259552 02:36:34 Shutter LASER open 02:36:34 Received message from Camera: op=State serial=259554 02:36:34 GetSingleValue result=40 Value=cccccccc 02:36:34 SkyScan query 02:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:36:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:34 Parameters OK 02:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:34 Set A/D data flow result=40 02:36:34 Set A/D channel type result=40 02:36:34 Set A/D encoding result=40 02:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:34 Set channel filter=0.000000e+000 result=40 02:36:34 Config A/D Result=40 02:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:34 Get A/D filter: -9.255963e+061 result=40 02:36:34 Get A/D value=-858993460 result=40 02:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:34 Parameters OK 02:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:34 Set A/D data flow result=40 02:36:34 Set A/D channel type result=40 02:36:34 Set A/D encoding result=40 02:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:34 Set channel filter=0.000000e+000 result=40 02:36:34 Config A/D Result=40 02:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:34 Get A/D filter: -9.255963e+061 result=40 02:36:34 Get A/D value=-858993460 result=40 02:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:36:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:36:34 Aux= 02:36:34 Message to Camera, serial 259554 queued 02:36:43 Received message from Master: op=Shutter serial=259564 02:36:43 Shutter LASER close 02:36:43 Received message from Master: op=PointingHead serial=259568 02:36:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:36:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:36:44 Point started: ret=0 02:36:44 point_skyscan result=0 02:36:44 Check angles 02:36:44 SkyScan query 02:36:45 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.415<-21561 Statuses=0009 0009 02:36:45 Msec=0 True Az=135.855 Ze=-143.415 Az status=0009 Ze status=0009 02:36:45 Check angles 02:36:45 SkyScan query 02:36:46 SkyScan query done: ret=0 az=153.645<-10243 ze=-121.98<-20132 Statuses=0009 0009 02:36:46 Msec=750 True Az=153.645 Ze=-121.98 Az status=0009 Ze status=0009 02:36:46 Check angles 02:36:46 SkyScan query 02:36:47 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.025<-18735 Statuses=0009 0009 02:36:47 Msec=1500 True Az=171.195 Ze=-101.025 Az status=0009 Ze status=0009 02:36:47 Check angles 02:36:47 SkyScan query 02:36:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.13<-17342 Statuses=0008 0009 02:36:47 Msec=2250 True Az=176.01 Ze=-80.13 Az status=0008 Ze status=0009 02:36:47 Check angles 02:36:47 SkyScan query 02:36:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.07<-15938 Statuses=0008 0009 02:36:48 Msec=3000 True Az=176.01 Ze=-59.07 Az status=0008 Ze status=0009 02:36:48 Check angles 02:36:48 SkyScan query 02:36:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:36:49 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:36:49 Message to Master queued w/err=0: serial=259568 error=0 02:36:54 Received message from Master: op=Filter serial=259569 02:36:54 Color wheel filter change from 0 to 0 02:36:54 FLIGetFilterPos err=0 currentPosition=0 02:36:54 FLIGetStepsRemaining err=0 RemainingSteps=0 02:36:54 Filter is already there-color wheel unchanged 02:36:54 Received message from Master: op=Shutter serial=259570 02:36:54 Shutter LASER close 02:36:54 Received message from Camera: op=State serial=259572 02:36:54 GetSingleValue result=40 Value=cccccccc 02:36:54 SkyScan query 02:36:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:36:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:55 Parameters OK 02:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:55 Set A/D data flow result=40 02:36:55 Set A/D channel type result=40 02:36:55 Set A/D encoding result=40 02:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:55 Set channel filter=0.000000e+000 result=40 02:36:55 Config A/D Result=40 02:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:55 Get A/D filter: -9.255963e+061 result=40 02:36:55 Get A/D value=-858993460 result=40 02:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:55 Parameters OK 02:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:55 Set A/D data flow result=40 02:36:55 Set A/D channel type result=40 02:36:55 Set A/D encoding result=40 02:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:55 Set channel filter=0.000000e+000 result=40 02:36:55 Config A/D Result=40 02:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:55 Get A/D filter: -9.255963e+061 result=40 02:36:55 Get A/D value=-858993460 result=40 02:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:36:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:36:55 Aux= 02:36:55 Message to Camera, serial 259572 queued 02:37:32 Received message from Master: op=PointingHead serial=259585 02:37:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:37:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:37:32 Point started: ret=0 02:37:32 point_skyscan result=0 02:37:33 Check angles 02:37:33 SkyScan query 02:37:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.585<-13439 Statuses=0008 0009 02:37:33 Msec=0 True Az=175.995 Ze=-21.585 Az status=0008 Ze status=0009 02:37:34 Check angles 02:37:34 SkyScan query 02:37:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.195<-12013 Statuses=0008 0009 02:37:34 Msec=750 True Az=175.995 Ze=-0.195 Az status=0008 Ze status=0009 02:37:34 Check angles 02:37:34 SkyScan query 02:37:35 SkyScan query done: ret=0 az=175.995<-11733 ze=20.745<-10617 Statuses=0008 0009 02:37:35 Msec=1500 True Az=175.995 Ze=20.745 Az status=0008 Ze status=0009 02:37:35 Check angles 02:37:35 SkyScan query 02:37:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 02:37:36 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 02:37:36 Check angles 02:37:36 SkyScan query 02:37:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 02:37:36 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 02:37:36 Message to Master queued w/err=0: serial=259585 error=0 02:37:41 Received message from Master: op=Filter serial=259586 02:37:41 Color wheel filter change from 0 to 0 02:37:41 FLIGetFilterPos err=0 currentPosition=0 02:37:41 FLIGetStepsRemaining err=0 RemainingSteps=0 02:37:41 Filter is already there-color wheel unchanged 02:37:42 Received message from Master: op=Shutter serial=259587 02:37:42 Shutter LASER close 02:37:42 Received message from Camera: op=State serial=259589 02:37:42 GetSingleValue result=40 Value=cccccccc 02:37:42 SkyScan query 02:37:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:37:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:42 Parameters OK 02:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:42 Set A/D data flow result=40 02:37:42 Set A/D channel type result=40 02:37:42 Set A/D encoding result=40 02:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:42 Set channel filter=0.000000e+000 result=40 02:37:42 Config A/D Result=40 02:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:42 Get A/D filter: -9.255963e+061 result=40 02:37:42 Get A/D value=-858993460 result=40 02:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:42 Parameters OK 02:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:42 Set A/D data flow result=40 02:37:42 Set A/D channel type result=40 02:37:42 Set A/D encoding result=40 02:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:42 Set channel filter=0.000000e+000 result=40 02:37:42 Config A/D Result=40 02:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:42 Get A/D filter: -9.255963e+061 result=40 02:37:42 Get A/D value=-858993460 result=40 02:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:37:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:37:42 Aux= 02:37:42 Message to Camera, serial 259589 queued 02:38:19 Received message from Master: op=PointingHead serial=259602 02:38:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:38:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:38:19 Point started: ret=0 02:38:19 point_skyscan result=0 02:38:20 Check angles 02:38:20 SkyScan query 02:38:21 SkyScan query done: ret=0 az=153.06<-10204 ze=8.685<-11421 Statuses=0009 0009 02:38:21 Msec=0 True Az=153.06 Ze=8.685 Az status=0009 Ze status=0009 02:38:21 Check angles 02:38:21 SkyScan query 02:38:21 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.645<-12843 Statuses=0009 0009 02:38:21 Msec=750 True Az=135.18 Ze=-12.645 Az status=0009 Ze status=0009 02:38:22 Check angles 02:38:22 SkyScan query 02:38:22 SkyScan query done: ret=0 az=117.735<-7849 ze=-33.675<-14245 Statuses=0009 0009 02:38:22 Msec=1500 True Az=117.735 Ze=-33.675 Az status=0009 Ze status=0009 02:38:22 Check angles 02:38:22 SkyScan query 02:38:23 SkyScan query done: ret=0 az=99.975<-6665 ze=-51.57<-15438 Statuses=0009 0009 02:38:23 Msec=2250 True Az=99.975 Ze=-51.57 Az status=0009 Ze status=0009 02:38:23 Check angles 02:38:23 SkyScan query 02:38:24 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 02:38:24 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 02:38:24 Check angles 02:38:24 SkyScan query 02:38:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:38:24 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:38:24 Message to Master queued w/err=0: serial=259602 error=0 02:38:29 Received message from Master: op=Filter serial=259603 02:38:29 Color wheel filter change from 0 to 0 02:38:29 FLIGetFilterPos err=0 currentPosition=0 02:38:29 FLIGetStepsRemaining err=0 RemainingSteps=0 02:38:29 Filter is already there-color wheel unchanged 02:38:30 Received message from Master: op=Shutter serial=259604 02:38:30 Shutter LASER close 02:38:30 Received message from Camera: op=State serial=259606 02:38:30 GetSingleValue result=40 Value=cccccccc 02:38:30 SkyScan query 02:38:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:38:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:30 Parameters OK 02:38:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:30 Set A/D data flow result=40 02:38:30 Set A/D channel type result=40 02:38:30 Set A/D encoding result=40 02:38:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:30 Set channel filter=0.000000e+000 result=40 02:38:30 Config A/D Result=40 02:38:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:30 Get A/D filter: -9.255963e+061 result=40 02:38:30 Get A/D value=-858993460 result=40 02:38:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:30 Parameters OK 02:38:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:30 Set A/D data flow result=40 02:38:30 Set A/D channel type result=40 02:38:30 Set A/D encoding result=40 02:38:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:30 Set channel filter=0.000000e+000 result=40 02:38:30 Config A/D Result=40 02:38:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:30 Get A/D filter: -9.255963e+061 result=40 02:38:30 Get A/D value=-858993460 result=40 02:38:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:38:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:38:30 Aux= 02:38:30 Message to Camera, serial 259606 queued 02:39:07 Received message from Master: op=PointingHead serial=259619 02:39:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:39:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:39:07 Point started: ret=0 02:39:07 point_skyscan result=0 02:39:08 Check angles 02:39:08 SkyScan query 02:39:09 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.495<-17433 Statuses=0009 0009 02:39:09 Msec=0 True Az=109.17 Ze=-81.495 Az status=0009 Ze status=0009 02:39:09 Check angles 02:39:09 SkyScan query 02:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.87<-18858 Statuses=0008 0009 02:39:10 Msec=750 True Az=112.995 Ze=-102.87 Az status=0008 Ze status=0009 02:39:10 Check angles 02:39:10 SkyScan query 02:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.84<-20256 Statuses=0008 0009 02:39:10 Msec=1500 True Az=112.995 Ze=-123.84 Az status=0008 Ze status=0009 02:39:10 Check angles 02:39:10 SkyScan query 02:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.765<-21651 Statuses=0008 0009 02:39:11 Msec=2250 True Az=112.995 Ze=-144.765 Az status=0008 Ze status=0009 02:39:11 Check angles 02:39:11 SkyScan query 02:39:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 02:39:12 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 02:39:12 Check angles 02:39:12 SkyScan query 02:39:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:39:13 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:39:13 Message to Master queued w/err=0: serial=259619 error=0 02:39:18 Received message from Master: op=Filter serial=259620 02:39:18 Color wheel filter change from 0 to 0 02:39:18 FLIGetFilterPos err=0 currentPosition=0 02:39:18 FLIGetStepsRemaining err=0 RemainingSteps=0 02:39:18 Filter is already there-color wheel unchanged 02:39:18 Received message from Master: op=Shutter serial=259621 02:39:18 Shutter LASER open 02:39:18 Received message from Camera: op=State serial=259623 02:39:18 GetSingleValue result=40 Value=cccccccc 02:39:18 SkyScan query 02:39:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:39:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:18 Parameters OK 02:39:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:18 Set A/D data flow result=40 02:39:18 Set A/D channel type result=40 02:39:18 Set A/D encoding result=40 02:39:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:18 Set channel filter=0.000000e+000 result=40 02:39:18 Config A/D Result=40 02:39:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:18 Get A/D filter: -9.255963e+061 result=40 02:39:18 Get A/D value=-858993460 result=40 02:39:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:18 Parameters OK 02:39:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:18 Set A/D data flow result=40 02:39:18 Set A/D channel type result=40 02:39:18 Set A/D encoding result=40 02:39:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:18 Set channel filter=0.000000e+000 result=40 02:39:18 Config A/D Result=40 02:39:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:18 Get A/D filter: -9.255963e+061 result=40 02:39:18 Get A/D value=-858993460 result=40 02:39:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:39:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:39:18 Aux= 02:39:18 Message to Camera, serial 259623 queued 02:39:27 Received message from Master: op=Shutter serial=259633 02:39:27 Shutter LASER close 02:39:27 Received message from Master: op=PointingHead serial=259637 02:39:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:39:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:39:28 Point started: ret=0 02:39:28 point_skyscan result=0 02:39:28 Check angles 02:39:28 SkyScan query 02:39:29 SkyScan query done: ret=0 az=89.88<-5992 ze=157.095<-1527 Statuses=0009 0009 02:39:29 Msec=0 True Az=89.88 Ze=157.095 Az status=0009 Ze status=0009 02:39:29 Check angles 02:39:29 SkyScan query 02:39:30 SkyScan query done: ret=0 az=72.03<-4802 ze=135.72<-2952 Statuses=0009 0009 02:39:30 Msec=750 True Az=72.03 Ze=135.72 Az status=0009 Ze status=0009 02:39:30 Check angles 02:39:30 SkyScan query 02:39:30 SkyScan query done: ret=0 az=54.555<-3637 ze=114.72<-4352 Statuses=0009 0009 02:39:30 Msec=1500 True Az=54.555 Ze=114.72 Az status=0009 Ze status=0009 02:39:31 Check angles 02:39:31 SkyScan query 02:39:31 SkyScan query done: ret=0 az=41.025<-2735 ze=93.81<-5746 Statuses=0009 0009 02:39:31 Msec=2250 True Az=41.025 Ze=93.81 Az status=0009 Ze status=0009 02:39:31 Check angles 02:39:31 SkyScan query 02:39:32 SkyScan query done: ret=0 az=40.98<-2732 ze=72.375<-7175 Statuses=0008 0009 02:39:32 Msec=3000 True Az=40.98 Ze=72.375 Az status=0008 Ze status=0009 02:39:32 Check angles 02:39:32 SkyScan query 02:39:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.23<-8518 Statuses=0008 0009 02:39:33 Msec=3750 True Az=40.995 Ze=52.23 Az status=0008 Ze status=0009 02:39:33 Check angles 02:39:33 SkyScan query 02:39:34 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 02:39:34 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 02:39:34 Message to Master queued w/err=0: serial=259637 error=0 02:39:39 Received message from Master: op=Filter serial=259638 02:39:39 Color wheel filter change from 0 to 0 02:39:39 FLIGetFilterPos err=0 currentPosition=0 02:39:39 FLIGetStepsRemaining err=0 RemainingSteps=0 02:39:39 Filter is already there-color wheel unchanged 02:39:39 Received message from Master: op=Shutter serial=259639 02:39:39 Shutter LASER close 02:39:39 Received message from Camera: op=State serial=259641 02:39:39 GetSingleValue result=40 Value=cccccccc 02:39:39 SkyScan query 02:39:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:39:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:39 Parameters OK 02:39:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:39 Set A/D data flow result=40 02:39:39 Set A/D channel type result=40 02:39:39 Set A/D encoding result=40 02:39:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:39 Set channel filter=0.000000e+000 result=40 02:39:39 Config A/D Result=40 02:39:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:39 Get A/D filter: -9.255963e+061 result=40 02:39:39 Get A/D value=-858993460 result=40 02:39:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:39 Parameters OK 02:39:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:39 Set A/D data flow result=40 02:39:39 Set A/D channel type result=40 02:39:39 Set A/D encoding result=40 02:39:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:39 Set channel filter=0.000000e+000 result=40 02:39:39 Config A/D Result=40 02:39:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:39 Get A/D filter: -9.255963e+061 result=40 02:39:39 Get A/D value=-858993460 result=40 02:39:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:39:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:39:39 Aux= 02:39:39 Message to Camera, serial 259641 queued 02:40:16 Received message from Master: op=PointingHead serial=259654 02:40:16 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:40:16 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:40:17 Point started: ret=0 02:40:17 point_skyscan result=0 02:40:17 Check angles 02:40:17 SkyScan query 02:40:18 SkyScan query done: ret=0 az=64.065<-4271 ze=66.54<-7564 Statuses=0009 0008 02:40:18 Msec=0 True Az=64.065 Ze=66.54 Az status=0009 Ze status=0008 02:40:18 Check angles 02:40:18 SkyScan query 02:40:19 SkyScan query done: ret=0 az=81.375<-5425 ze=66.51<-7566 Statuses=0009 0008 02:40:19 Msec=750 True Az=81.375 Ze=66.51 Az status=0009 Ze status=0008 02:40:19 Check angles 02:40:19 SkyScan query 02:40:20 SkyScan query done: ret=0 az=98.97<-6598 ze=66.495<-7567 Statuses=0009 0008 02:40:20 Msec=1500 True Az=98.97 Ze=66.495 Az status=0009 Ze status=0008 02:40:20 Check angles 02:40:20 SkyScan query 02:40:20 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 02:40:20 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 02:40:20 Check angles 02:40:20 SkyScan query 02:40:21 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 02:40:21 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 02:40:21 Check angles 02:40:21 SkyScan query 02:40:22 SkyScan query done: ret=0 az=151.995<-10133 ze=66.495<-7567 Statuses=0009 0008 02:40:22 Msec=3750 True Az=151.995 Ze=66.495 Az status=0009 Ze status=0008 02:40:22 Check angles 02:40:22 SkyScan query 02:40:23 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:40:23 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:40:23 Message to Master queued w/err=0: serial=259654 error=0 02:40:28 Received message from Master: op=Filter serial=259655 02:40:28 Color wheel filter change from 0 to 0 02:40:28 FLIGetFilterPos err=0 currentPosition=0 02:40:28 FLIGetStepsRemaining err=0 RemainingSteps=0 02:40:28 Filter is already there-color wheel unchanged 02:40:28 Received message from Master: op=Shutter serial=259656 02:40:28 Shutter LASER close 02:40:28 Received message from Camera: op=State serial=259658 02:40:28 GetSingleValue result=40 Value=cccccccc 02:40:28 SkyScan query 02:40:28 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:40:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:28 Parameters OK 02:40:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:28 Set A/D data flow result=40 02:40:28 Set A/D channel type result=40 02:40:28 Set A/D encoding result=40 02:40:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:28 Set channel filter=0.000000e+000 result=40 02:40:28 Config A/D Result=40 02:40:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:28 Get A/D filter: -9.255963e+061 result=40 02:40:28 Get A/D value=-858993460 result=40 02:40:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:28 Parameters OK 02:40:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:28 Set A/D data flow result=40 02:40:28 Set A/D channel type result=40 02:40:28 Set A/D encoding result=40 02:40:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:28 Set channel filter=0.000000e+000 result=40 02:40:28 Config A/D Result=40 02:40:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:28 Get A/D filter: -9.255963e+061 result=40 02:40:28 Get A/D value=-858993460 result=40 02:40:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:28 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:40:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:40:28 Aux= 02:40:28 Message to Camera, serial 259658 queued 02:41:05 Received message from Master: op=PointingHead serial=259671 02:41:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:41:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:41:06 Point started: ret=0 02:41:06 point_skyscan result=0 02:41:06 Check angles 02:41:06 SkyScan query 02:41:07 SkyScan query done: ret=0 az=135.12<-9008 ze=36.93<-9538 Statuses=0009 0009 02:41:07 Msec=0 True Az=135.12 Ze=36.93 Az status=0009 Ze status=0009 02:41:07 Check angles 02:41:07 SkyScan query 02:41:08 SkyScan query done: ret=0 az=117.72<-7848 ze=15.93<-10938 Statuses=0009 0009 02:41:08 Msec=750 True Az=117.72 Ze=15.93 Az status=0009 Ze status=0009 02:41:08 Check angles 02:41:08 SkyScan query 02:41:08 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.385<-12359 Statuses=0009 0009 02:41:08 Msec=1500 True Az=99.975 Ze=-5.385 Az status=0009 Ze status=0009 02:41:09 Check angles 02:41:09 SkyScan query 02:41:09 SkyScan query done: ret=0 az=82.83<-5522 ze=-25.95<-13730 Statuses=0009 0009 02:41:09 Msec=2250 True Az=82.83 Ze=-25.95 Az status=0009 Ze status=0009 02:41:09 Check angles 02:41:09 SkyScan query 02:41:10 SkyScan query done: ret=0 az=65.28<-4352 ze=-38.58<-14572 Statuses=0009 0008 02:41:10 Msec=3000 True Az=65.28 Ze=-38.58 Az status=0009 Ze status=0008 02:41:10 Check angles 02:41:10 SkyScan query 02:41:11 SkyScan query done: ret=0 az=47.88<-3192 ze=-38.52<-14568 Statuses=0009 0008 02:41:11 Msec=3750 True Az=47.88 Ze=-38.52 Az status=0009 Ze status=0008 02:41:11 Check angles 02:41:11 SkyScan query 02:41:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:41:11 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:41:11 Message to Master queued w/err=0: serial=259671 error=0 02:41:16 Received message from Master: op=Filter serial=259672 02:41:16 Color wheel filter change from 0 to 0 02:41:16 FLIGetFilterPos err=0 currentPosition=0 02:41:16 FLIGetStepsRemaining err=0 RemainingSteps=0 02:41:16 Filter is already there-color wheel unchanged 02:41:17 Received message from Master: op=Shutter serial=259673 02:41:17 Shutter LASER close 02:41:17 Received message from Camera: op=State serial=259675 02:41:17 GetSingleValue result=40 Value=cccccccc 02:41:17 SkyScan query 02:41:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:41:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:17 Parameters OK 02:41:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:17 Set A/D data flow result=40 02:41:17 Set A/D channel type result=40 02:41:17 Set A/D encoding result=40 02:41:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:17 Set channel filter=0.000000e+000 result=40 02:41:17 Config A/D Result=40 02:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:17 Get A/D filter: -9.255963e+061 result=40 02:41:17 Get A/D value=-858993460 result=40 02:41:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:17 Parameters OK 02:41:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:17 Set A/D data flow result=40 02:41:17 Set A/D channel type result=40 02:41:17 Set A/D encoding result=40 02:41:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:17 Set channel filter=0.000000e+000 result=40 02:41:17 Config A/D Result=40 02:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:17 Get A/D filter: -9.255963e+061 result=40 02:41:17 Get A/D value=-858993460 result=40 02:41:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:41:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:41:17 Aux= 02:41:17 Message to Camera, serial 259675 queued 02:41:54 Received message from Master: op=PointingHead serial=259688 02:41:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:41:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:41:54 Point started: ret=0 02:41:54 point_skyscan result=0 02:41:55 Check angles 02:41:55 SkyScan query 02:41:56 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.64<-16576 Statuses=0009 0009 02:41:56 Msec=0 True Az=64.245 Ze=-68.64 Az status=0009 Ze status=0009 02:41:56 Check angles 02:41:56 SkyScan query 02:41:56 SkyScan query done: ret=0 az=82.155<-5477 ze=-90.03<-18002 Statuses=0009 0009 02:41:56 Msec=750 True Az=82.155 Ze=-90.03 Az status=0009 Ze status=0009 02:41:57 Check angles 02:41:57 SkyScan query 02:41:57 SkyScan query done: ret=0 az=100.065<-6671 ze=-111.375<-19425 Statuses=0009 0009 02:41:57 Msec=1500 True Az=100.065 Ze=-111.375 Az status=0009 Ze status=0009 02:41:57 Check angles 02:41:57 SkyScan query 02:41:58 SkyScan query done: ret=0 az=117.495<-7833 ze=-132.33<-20822 Statuses=0009 0009 02:41:58 Msec=2250 True Az=117.495 Ze=-132.33 Az status=0009 Ze status=0009 02:41:58 Check angles 02:41:58 SkyScan query 02:41:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 02:41:59 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 02:41:59 Check angles 02:41:59 SkyScan query 02:41:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:41:59 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:41:59 Message to Master queued w/err=0: serial=259688 error=0 02:42:04 Received message from Master: op=Filter serial=259689 02:42:04 Color wheel filter change from 0 to 0 02:42:04 FLIGetFilterPos err=0 currentPosition=0 02:42:04 FLIGetStepsRemaining err=0 RemainingSteps=0 02:42:04 Filter is already there-color wheel unchanged 02:42:05 Received message from Master: op=Shutter serial=259690 02:42:05 Shutter LASER close 02:42:05 Received message from Camera: op=State serial=259692 02:42:05 GetSingleValue result=40 Value=cccccccc 02:42:05 SkyScan query 02:42:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:42:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:05 Parameters OK 02:42:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:05 Set A/D data flow result=40 02:42:05 Set A/D channel type result=40 02:42:05 Set A/D encoding result=40 02:42:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:05 Set channel filter=0.000000e+000 result=40 02:42:05 Config A/D Result=40 02:42:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:05 Get A/D filter: -9.255963e+061 result=40 02:42:05 Get A/D value=-858993460 result=40 02:42:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:05 Parameters OK 02:42:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:05 Set A/D data flow result=40 02:42:05 Set A/D channel type result=40 02:42:05 Set A/D encoding result=40 02:42:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:05 Set channel filter=0.000000e+000 result=40 02:42:05 Config A/D Result=40 02:42:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:05 Get A/D filter: -9.255963e+061 result=40 02:42:05 Get A/D value=-858993460 result=40 02:42:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:42:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:42:05 Aux= 02:42:05 Message to Camera, serial 259692 queued 02:42:42 Received message from Master: op=PointingHead serial=259705 02:42:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:42:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:42:42 Point started: ret=0 02:42:42 point_skyscan result=0 02:42:43 Check angles 02:42:43 SkyScan query 02:42:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 02:42:44 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 02:42:44 Check angles 02:42:44 SkyScan query 02:42:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:42:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:42:45 Message to Master queued w/err=0: serial=259705 error=0 02:42:50 Received message from Master: op=Filter serial=259706 02:42:50 Color wheel filter change from 0 to 0 02:42:50 FLIGetFilterPos err=0 currentPosition=0 02:42:50 FLIGetStepsRemaining err=0 RemainingSteps=0 02:42:50 Filter is already there-color wheel unchanged 02:42:50 Received message from Master: op=Shutter serial=259707 02:42:50 Shutter LASER open 02:42:50 Received message from Camera: op=State serial=259709 02:42:50 GetSingleValue result=40 Value=cccccccc 02:42:50 SkyScan query 02:42:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:42:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:50 Parameters OK 02:42:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:50 Set A/D data flow result=40 02:42:50 Set A/D channel type result=40 02:42:50 Set A/D encoding result=40 02:42:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:50 Set channel filter=0.000000e+000 result=40 02:42:50 Config A/D Result=40 02:42:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:50 Get A/D filter: -9.255963e+061 result=40 02:42:50 Get A/D value=-858993460 result=40 02:42:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:50 Parameters OK 02:42:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:50 Set A/D data flow result=40 02:42:50 Set A/D channel type result=40 02:42:50 Set A/D encoding result=40 02:42:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:50 Set channel filter=0.000000e+000 result=40 02:42:50 Config A/D Result=40 02:42:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:50 Get A/D filter: -9.255963e+061 result=40 02:42:50 Get A/D value=-858993460 result=40 02:42:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:42:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:42:50 Aux= 02:42:50 Message to Camera, serial 259709 queued 02:42:59 Received message from Master: op=Shutter serial=259719 02:42:59 Shutter LASER close 02:42:59 Received message from Master: op=PointingHead serial=259723 02:42:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:42:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:43:00 Point started: ret=0 02:43:00 point_skyscan result=0 02:43:01 Check angles 02:43:01 SkyScan query 02:43:01 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.145<-21543 Statuses=0009 0009 02:43:01 Msec=0 True Az=136.095 Ze=-143.145 Az status=0009 Ze status=0009 02:43:01 Check angles 02:43:01 SkyScan query 02:43:02 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.16<-20144 Statuses=0009 0009 02:43:02 Msec=750 True Az=153.54 Ze=-122.16 Az status=0009 Ze status=0009 02:43:02 Check angles 02:43:02 SkyScan query 02:43:03 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.265<-18751 Statuses=0009 0009 02:43:03 Msec=1500 True Az=171.135 Ze=-101.265 Az status=0009 Ze status=0009 02:43:03 Check angles 02:43:03 SkyScan query 02:43:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.31<-17354 Statuses=0008 0009 02:43:03 Msec=2250 True Az=176.01 Ze=-80.31 Az status=0008 Ze status=0009 02:43:04 Check angles 02:43:04 SkyScan query 02:43:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.31<-15954 Statuses=0008 0009 02:43:04 Msec=3000 True Az=176.01 Ze=-59.31 Az status=0008 Ze status=0009 02:43:04 Check angles 02:43:04 SkyScan query 02:43:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:43:05 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:43:05 Message to Master queued w/err=0: serial=259723 error=0 02:43:10 Received message from Master: op=Filter serial=259724 02:43:10 Color wheel filter change from 0 to 0 02:43:10 FLIGetFilterPos err=0 currentPosition=0 02:43:10 FLIGetStepsRemaining err=0 RemainingSteps=0 02:43:10 Filter is already there-color wheel unchanged 02:43:10 Received message from Master: op=Shutter serial=259725 02:43:10 Shutter LASER close 02:43:10 Received message from Camera: op=State serial=259727 02:43:10 GetSingleValue result=40 Value=cccccccc 02:43:10 SkyScan query 02:43:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:43:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:11 Parameters OK 02:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:11 Set A/D data flow result=40 02:43:11 Set A/D channel type result=40 02:43:11 Set A/D encoding result=40 02:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:11 Set channel filter=0.000000e+000 result=40 02:43:11 Config A/D Result=40 02:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:11 Get A/D filter: -9.255963e+061 result=40 02:43:11 Get A/D value=-858993460 result=40 02:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:11 Parameters OK 02:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:11 Set A/D data flow result=40 02:43:11 Set A/D channel type result=40 02:43:11 Set A/D encoding result=40 02:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:11 Set channel filter=0.000000e+000 result=40 02:43:11 Config A/D Result=40 02:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:11 Get A/D filter: -9.255963e+061 result=40 02:43:11 Get A/D value=-858993460 result=40 02:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:43:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:43:11 Aux= 02:43:11 Message to Camera, serial 259727 queued 02:43:48 Received message from Master: op=PointingHead serial=259740 02:43:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:43:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:43:48 Point started: ret=0 02:43:48 point_skyscan result=0 02:43:49 Check angles 02:43:49 SkyScan query 02:43:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.6<-13440 Statuses=0008 0009 02:43:49 Msec=0 True Az=175.995 Ze=-21.6 Az status=0008 Ze status=0009 02:43:50 Check angles 02:43:50 SkyScan query 02:43:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.615<-12041 Statuses=0008 0009 02:43:50 Msec=750 True Az=175.995 Ze=-0.615 Az status=0008 Ze status=0009 02:43:50 Check angles 02:43:50 SkyScan query 02:43:51 SkyScan query done: ret=0 az=175.995<-11733 ze=20.31<-10646 Statuses=0008 0009 02:43:51 Msec=1500 True Az=175.995 Ze=20.31 Az status=0008 Ze status=0009 02:43:51 Check angles 02:43:51 SkyScan query 02:43:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 02:43:52 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 02:43:52 Check angles 02:43:52 SkyScan query 02:43:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 02:43:52 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 02:43:52 Message to Master queued w/err=0: serial=259740 error=0 02:43:57 Received message from Master: op=Filter serial=259741 02:43:57 Color wheel filter change from 0 to 0 02:43:57 FLIGetFilterPos err=0 currentPosition=0 02:43:57 FLIGetStepsRemaining err=0 RemainingSteps=0 02:43:57 Filter is already there-color wheel unchanged 02:43:58 Received message from Master: op=Shutter serial=259742 02:43:58 Shutter LASER close 02:43:58 Received message from Camera: op=State serial=259744 02:43:58 GetSingleValue result=40 Value=cccccccc 02:43:58 SkyScan query 02:43:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:43:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:58 Parameters OK 02:43:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:58 Set A/D data flow result=40 02:43:58 Set A/D channel type result=40 02:43:58 Set A/D encoding result=40 02:43:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:58 Set channel filter=0.000000e+000 result=40 02:43:58 Config A/D Result=40 02:43:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:58 Get A/D filter: -9.255963e+061 result=40 02:43:58 Get A/D value=-858993460 result=40 02:43:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:58 Parameters OK 02:43:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:58 Set A/D data flow result=40 02:43:58 Set A/D channel type result=40 02:43:58 Set A/D encoding result=40 02:43:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:58 Set channel filter=0.000000e+000 result=40 02:43:58 Config A/D Result=40 02:43:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:58 Get A/D filter: -9.255963e+061 result=40 02:43:58 Get A/D value=-858993460 result=40 02:43:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:43:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:43:58 Aux= 02:43:58 Message to Camera, serial 259744 queued 02:44:35 Received message from Master: op=PointingHead serial=259757 02:44:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:44:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:44:35 Point started: ret=0 02:44:35 point_skyscan result=0 02:44:36 Check angles 02:44:36 SkyScan query 02:44:37 SkyScan query done: ret=0 az=153.09<-10206 ze=8.82<-11412 Statuses=0009 0009 02:44:37 Msec=0 True Az=153.09 Ze=8.82 Az status=0009 Ze status=0009 02:44:37 Check angles 02:44:37 SkyScan query 02:44:37 SkyScan query done: ret=0 az=135.615<-9041 ze=-12.135<-12809 Statuses=0009 0009 02:44:37 Msec=750 True Az=135.615 Ze=-12.135 Az status=0009 Ze status=0009 02:44:38 Check angles 02:44:38 SkyScan query 02:44:38 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.555<-14237 Statuses=0009 0009 02:44:38 Msec=1500 True Az=117.795 Ze=-33.555 Az status=0009 Ze status=0009 02:44:38 Check angles 02:44:38 SkyScan query 02:44:39 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.555<-15437 Statuses=0009 0009 02:44:39 Msec=2250 True Az=100.29 Ze=-51.555 Az status=0009 Ze status=0009 02:44:39 Check angles 02:44:39 SkyScan query 02:44:40 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 02:44:40 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 02:44:40 Check angles 02:44:40 SkyScan query 02:44:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:44:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:44:41 Message to Master queued w/err=0: serial=259757 error=0 02:44:46 Received message from Master: op=Filter serial=259758 02:44:46 Color wheel filter change from 0 to 0 02:44:46 FLIGetFilterPos err=0 currentPosition=0 02:44:46 FLIGetStepsRemaining err=0 RemainingSteps=0 02:44:46 Filter is already there-color wheel unchanged 02:44:46 Received message from Master: op=Shutter serial=259759 02:44:46 Shutter LASER close 02:44:46 Received message from Camera: op=State serial=259761 02:44:46 GetSingleValue result=40 Value=cccccccc 02:44:46 SkyScan query 02:44:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:44:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:46 Parameters OK 02:44:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:46 Set A/D data flow result=40 02:44:46 Set A/D channel type result=40 02:44:46 Set A/D encoding result=40 02:44:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:46 Set channel filter=0.000000e+000 result=40 02:44:46 Config A/D Result=40 02:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:46 Get A/D filter: -9.255963e+061 result=40 02:44:46 Get A/D value=-858993460 result=40 02:44:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:46 Parameters OK 02:44:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:46 Set A/D data flow result=40 02:44:46 Set A/D channel type result=40 02:44:46 Set A/D encoding result=40 02:44:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:46 Set channel filter=0.000000e+000 result=40 02:44:46 Config A/D Result=40 02:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:46 Get A/D filter: -9.255963e+061 result=40 02:44:46 Get A/D value=-858993460 result=40 02:44:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:44:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:44:46 Aux= 02:44:46 Message to Camera, serial 259761 queued 02:45:23 Received message from Master: op=PointingHead serial=259774 02:45:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:45:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:45:24 Point started: ret=0 02:45:24 point_skyscan result=0 02:45:24 Check angles 02:45:24 SkyScan query 02:45:25 SkyScan query done: ret=0 az=108.75<-7250 ze=-81<-17400 Statuses=0009 0009 02:45:25 Msec=0 True Az=108.75 Ze=-81 Az status=0009 Ze status=0009 02:45:25 Check angles 02:45:25 SkyScan query 02:45:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.955<-18797 Statuses=0008 0009 02:45:26 Msec=750 True Az=112.995 Ze=-101.955 Az status=0008 Ze status=0009 02:45:26 Check angles 02:45:26 SkyScan query 02:45:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.88<-20192 Statuses=0008 0009 02:45:26 Msec=1500 True Az=112.995 Ze=-122.88 Az status=0008 Ze status=0009 02:45:27 Check angles 02:45:27 SkyScan query 02:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.88<-21592 Statuses=0008 0009 02:45:27 Msec=2250 True Az=112.995 Ze=-143.88 Az status=0008 Ze status=0009 02:45:27 Received message from Master: op=Identify serial=259775 02:45:27 Check angles 02:45:27 SkyScan query 02:45:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.775<-22985 Statuses=0008 0009 02:45:28 Msec=3000 True Az=112.995 Ze=-164.775 Az status=0008 Ze status=0009 02:45:28 Check angles 02:45:28 SkyScan query 02:45:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:45:29 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:45:29 Message to Master queued w/err=0: serial=259774 error=0 02:45:34 Received message from Master: op=Filter serial=259778 02:45:34 Color wheel filter change from 0 to 0 02:45:34 FLIGetFilterPos err=0 currentPosition=0 02:45:34 FLIGetStepsRemaining err=0 RemainingSteps=0 02:45:34 Filter is already there-color wheel unchanged 02:45:34 Received message from Master: op=Shutter serial=259779 02:45:34 Shutter LASER open 02:45:34 Received message from Camera: op=State serial=259781 02:45:34 GetSingleValue result=40 Value=cccccccc 02:45:34 SkyScan query 02:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:45:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:35 Parameters OK 02:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:35 Set A/D data flow result=40 02:45:35 Set A/D channel type result=40 02:45:35 Set A/D encoding result=40 02:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:35 Set channel filter=0.000000e+000 result=40 02:45:35 Config A/D Result=40 02:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:35 Get A/D filter: -9.255963e+061 result=40 02:45:35 Get A/D value=-858993460 result=40 02:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:35 Parameters OK 02:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:35 Set A/D data flow result=40 02:45:35 Set A/D channel type result=40 02:45:35 Set A/D encoding result=40 02:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:35 Set channel filter=0.000000e+000 result=40 02:45:35 Config A/D Result=40 02:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:35 Get A/D filter: -9.255963e+061 result=40 02:45:35 Get A/D value=-858993460 result=40 02:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:45:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:45:35 Aux= 02:45:35 Message to Camera, serial 259781 queued 02:45:43 Received message from Master: op=Shutter serial=259791 02:45:43 Shutter LASER close 02:45:43 Received message from Master: op=PointingHead serial=259795 02:45:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:45:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:45:44 Point started: ret=0 02:45:44 point_skyscan result=0 02:45:45 Check angles 02:45:45 SkyScan query 02:45:45 SkyScan query done: ret=0 az=89.625<-5975 ze=156.81<-1546 Statuses=0009 0009 02:45:45 Msec=0 True Az=89.625 Ze=156.81 Az status=0009 Ze status=0009 02:45:45 Check angles 02:45:45 SkyScan query 02:45:46 SkyScan query done: ret=0 az=72.09<-4806 ze=135.87<-2942 Statuses=0009 0009 02:45:46 Msec=750 True Az=72.09 Ze=135.87 Az status=0009 Ze status=0009 02:45:46 Check angles 02:45:46 SkyScan query 02:45:47 SkyScan query done: ret=0 az=54.69<-3646 ze=114.9<-4340 Statuses=0009 0009 02:45:47 Msec=1500 True Az=54.69 Ze=114.9 Az status=0009 Ze status=0009 02:45:47 Check angles 02:45:47 SkyScan query 02:45:47 SkyScan query done: ret=0 az=41.025<-2735 ze=93.96<-5736 Statuses=0009 0009 02:45:47 Msec=2250 True Az=41.025 Ze=93.96 Az status=0009 Ze status=0009 02:45:48 Check angles 02:45:48 SkyScan query 02:45:48 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 [UTC 2018-12-19 02:45:48] 02:45:48 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 02:45:48 Check angles 02:45:48 SkyScan query 02:45:49 SkyScan query done: ret=0 az=40.98<-2732 ze=52.59<-8494 Statuses=0008 0009 02:45:49 Msec=3750 True Az=40.98 Ze=52.59 Az status=0008 Ze status=0009 02:45:49 Check angles 02:45:49 SkyScan query 02:45:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:45:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:45:50 Message to Master queued w/err=0: serial=259795 error=0 02:45:55 Received message from Master: op=Filter serial=259796 02:45:55 Color wheel filter change from 0 to 0 02:45:55 FLIGetFilterPos err=0 currentPosition=0 02:45:55 FLIGetStepsRemaining err=0 RemainingSteps=0 02:45:55 Filter is already there-color wheel unchanged 02:45:55 Received message from Master: op=Shutter serial=259797 02:45:55 Shutter LASER close 02:45:55 Received message from Camera: op=State serial=259799 02:45:55 GetSingleValue result=40 Value=cccccccc 02:45:55 SkyScan query 02:45:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:45:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:56 Parameters OK 02:45:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:56 Set A/D data flow result=40 02:45:56 Set A/D channel type result=40 02:45:56 Set A/D encoding result=40 02:45:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:56 Set channel filter=0.000000e+000 result=40 02:45:56 Config A/D Result=40 02:45:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:56 Get A/D filter: -9.255963e+061 result=40 02:45:56 Get A/D value=-858993460 result=40 02:45:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:56 Parameters OK 02:45:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:56 Set A/D data flow result=40 02:45:56 Set A/D channel type result=40 02:45:56 Set A/D encoding result=40 02:45:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:56 Set channel filter=0.000000e+000 result=40 02:45:56 Config A/D Result=40 02:45:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:56 Get A/D filter: -9.255963e+061 result=40 02:45:56 Get A/D value=-858993460 result=40 02:45:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:45:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:45:56 Aux= 02:45:56 Message to Camera, serial 259799 queued 02:46:32 Received message from Master: op=PointingHead serial=259812 02:46:32 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:46:32 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:46:33 Point started: ret=0 02:46:33 point_skyscan result=0 02:46:33 Check angles 02:46:33 SkyScan query 02:46:34 SkyScan query done: ret=0 az=64.275<-4285 ze=66.555<-7563 Statuses=0009 0008 02:46:34 Msec=0 True Az=64.275 Ze=66.555 Az status=0009 Ze status=0008 02:46:34 Check angles 02:46:34 SkyScan query 02:46:35 SkyScan query done: ret=0 az=82.08<-5472 ze=66.51<-7566 Statuses=0009 0008 02:46:35 Msec=750 True Az=82.08 Ze=66.51 Az status=0009 Ze status=0008 02:46:35 Check angles 02:46:35 SkyScan query 02:46:36 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 02:46:36 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 02:46:36 Check angles 02:46:36 SkyScan query 02:46:36 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 02:46:36 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 02:46:36 Check angles 02:46:36 SkyScan query 02:46:37 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 02:46:37 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 02:46:37 Check angles 02:46:37 SkyScan query 02:46:38 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 02:46:38 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 02:46:38 Check angles 02:46:38 SkyScan query 02:46:39 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:46:39 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:46:39 Message to Master queued w/err=0: serial=259812 error=0 02:46:44 Received message from Master: op=Filter serial=259813 02:46:44 Color wheel filter change from 0 to 0 02:46:44 FLIGetFilterPos err=0 currentPosition=0 02:46:44 FLIGetStepsRemaining err=0 RemainingSteps=0 02:46:44 Filter is already there-color wheel unchanged 02:46:44 Received message from Master: op=Shutter serial=259814 02:46:44 Shutter LASER close 02:46:44 Received message from Camera: op=State serial=259816 02:46:44 GetSingleValue result=40 Value=cccccccc 02:46:44 SkyScan query 02:46:44 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:46:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:44 Parameters OK 02:46:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:44 Set A/D data flow result=40 02:46:44 Set A/D channel type result=40 02:46:44 Set A/D encoding result=40 02:46:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:44 Set channel filter=0.000000e+000 result=40 02:46:44 Config A/D Result=40 02:46:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:44 Get A/D filter: -9.255963e+061 result=40 02:46:44 Get A/D value=-858993460 result=40 02:46:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:44 Parameters OK 02:46:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:44 Set A/D data flow result=40 02:46:44 Set A/D channel type result=40 02:46:44 Set A/D encoding result=40 02:46:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:44 Set channel filter=0.000000e+000 result=40 02:46:44 Config A/D Result=40 02:46:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:44 Get A/D filter: -9.255963e+061 result=40 02:46:44 Get A/D value=-858993460 result=40 02:46:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:44 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:46:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:46:44 Aux= 02:46:44 Message to Camera, serial 259816 queued 02:47:21 Received message from Master: op=PointingHead serial=259829 02:47:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:47:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:47:22 Point started: ret=0 02:47:22 point_skyscan result=0 02:47:22 Check angles 02:47:22 SkyScan query 02:47:23 SkyScan query done: ret=0 az=135.18<-9012 ze=36.885<-9541 Statuses=0009 0009 02:47:23 Msec=0 True Az=135.18 Ze=36.885 Az status=0009 Ze status=0009 02:47:23 Check angles 02:47:23 SkyScan query 02:47:24 SkyScan query done: ret=0 az=117.705<-7847 ze=15.915<-10939 Statuses=0009 0009 02:47:24 Msec=750 True Az=117.705 Ze=15.915 Az status=0009 Ze status=0009 02:47:24 Check angles 02:47:24 SkyScan query 02:47:24 SkyScan query done: ret=0 az=100.335<-6689 ze=-5.01<-12334 Statuses=0009 0009 02:47:24 Msec=1500 True Az=100.335 Ze=-5.01 Az status=0009 Ze status=0009 02:47:25 Check angles 02:47:25 SkyScan query 02:47:25 SkyScan query done: ret=0 az=82.755<-5517 ze=-25.995<-13733 Statuses=0009 0009 02:47:25 Msec=2250 True Az=82.755 Ze=-25.995 Az status=0009 Ze status=0009 02:47:25 Check angles 02:47:25 SkyScan query 02:47:26 SkyScan query done: ret=0 az=65.28<-4352 ze=-38.58<-14572 Statuses=0009 0008 02:47:26 Msec=3000 True Az=65.28 Ze=-38.58 Az status=0009 Ze status=0008 02:47:26 Check angles 02:47:26 SkyScan query 02:47:27 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.52<-14568 Statuses=0009 0008 02:47:27 Msec=3750 True Az=47.415 Ze=-38.52 Az status=0009 Ze status=0008 02:47:27 Check angles 02:47:27 SkyScan query 02:47:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:47:27 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:47:27 Message to Master queued w/err=0: serial=259829 error=0 02:47:32 Received message from Master: op=Filter serial=259830 02:47:32 Color wheel filter change from 0 to 0 02:47:32 FLIGetFilterPos err=0 currentPosition=0 02:47:32 FLIGetStepsRemaining err=0 RemainingSteps=0 02:47:32 Filter is already there-color wheel unchanged 02:47:33 Received message from Master: op=Shutter serial=259831 02:47:33 Shutter LASER close 02:47:33 Received message from Camera: op=State serial=259833 02:47:33 GetSingleValue result=40 Value=cccccccc 02:47:33 SkyScan query 02:47:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:47:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:33 Parameters OK 02:47:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:33 Set A/D data flow result=40 02:47:33 Set A/D channel type result=40 02:47:33 Set A/D encoding result=40 02:47:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:33 Set channel filter=0.000000e+000 result=40 02:47:33 Config A/D Result=40 02:47:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:33 Get A/D filter: -9.255963e+061 result=40 02:47:33 Get A/D value=-858993460 result=40 02:47:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:33 Parameters OK 02:47:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:33 Set A/D data flow result=40 02:47:33 Set A/D channel type result=40 02:47:33 Set A/D encoding result=40 02:47:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:33 Set channel filter=0.000000e+000 result=40 02:47:33 Config A/D Result=40 02:47:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:33 Get A/D filter: -9.255963e+061 result=40 02:47:33 Get A/D value=-858993460 result=40 02:47:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:47:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:47:33 Aux= 02:47:33 Message to Camera, serial 259833 queued 02:48:10 Received message from Master: op=PointingHead serial=259846 02:48:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:48:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:48:10 Point started: ret=0 02:48:10 point_skyscan result=0 02:48:11 Check angles 02:48:11 SkyScan query 02:48:12 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.805<-16587 Statuses=0009 0009 02:48:12 Msec=0 True Az=64.395 Ze=-68.805 Az status=0009 Ze status=0009 02:48:12 Check angles 02:48:12 SkyScan query 02:48:12 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.76<-17984 Statuses=0009 0009 02:48:12 Msec=750 True Az=81.825 Ze=-89.76 Az status=0009 Ze status=0009 02:48:13 Check angles 02:48:13 SkyScan query 02:48:13 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.7<-19380 Statuses=0009 0009 02:48:13 Msec=1500 True Az=99.39 Ze=-110.7 Az status=0009 Ze status=0009 02:48:13 Check angles 02:48:13 SkyScan query 02:48:14 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.64<-20776 Statuses=0009 0009 02:48:14 Msec=2250 True Az=116.82 Ze=-131.64 Az status=0009 Ze status=0009 02:48:14 Check angles 02:48:14 SkyScan query 02:48:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 02:48:15 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 02:48:15 Check angles 02:48:15 SkyScan query 02:48:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:48:15 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:48:15 Message to Master queued w/err=0: serial=259846 error=0 02:48:20 Received message from Master: op=Filter serial=259847 02:48:20 Color wheel filter change from 0 to 0 02:48:20 FLIGetFilterPos err=0 currentPosition=0 02:48:20 FLIGetStepsRemaining err=0 RemainingSteps=0 02:48:20 Filter is already there-color wheel unchanged 02:48:21 Received message from Master: op=Shutter serial=259848 02:48:21 Shutter LASER close 02:48:21 Received message from Camera: op=State serial=259850 02:48:21 GetSingleValue result=40 Value=cccccccc 02:48:21 SkyScan query 02:48:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:48:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:21 Parameters OK 02:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:21 Set A/D data flow result=40 02:48:21 Set A/D channel type result=40 02:48:21 Set A/D encoding result=40 02:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:21 Set channel filter=0.000000e+000 result=40 02:48:21 Config A/D Result=40 02:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:21 Get A/D filter: -9.255963e+061 result=40 02:48:21 Get A/D value=-858993460 result=40 02:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:21 Parameters OK 02:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:21 Set A/D data flow result=40 02:48:21 Set A/D channel type result=40 02:48:21 Set A/D encoding result=40 02:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:21 Set channel filter=0.000000e+000 result=40 02:48:21 Config A/D Result=40 02:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:21 Get A/D filter: -9.255963e+061 result=40 02:48:21 Get A/D value=-858993460 result=40 02:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:48:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:48:21 Aux= 02:48:21 Message to Camera, serial 259850 queued 02:48:57 Received message from Master: op=PointingHead serial=259862 02:48:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:48:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:48:57 Point started: ret=0 02:48:57 point_skyscan result=0 02:48:58 Check angles 02:48:58 SkyScan query 02:48:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 02:48:59 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 02:48:59 Check angles 02:48:59 SkyScan query 02:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:49:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:49:00 Message to Master queued w/err=0: serial=259862 error=0 02:49:05 Received message from Master: op=Filter serial=259863 02:49:05 Color wheel filter change from 0 to 0 02:49:05 FLIGetFilterPos err=0 currentPosition=0 02:49:05 FLIGetStepsRemaining err=0 RemainingSteps=0 02:49:05 Filter is already there-color wheel unchanged 02:49:05 Received message from Master: op=Shutter serial=259864 02:49:05 Shutter LASER open 02:49:05 Received message from Camera: op=State serial=259866 02:49:05 GetSingleValue result=40 Value=cccccccc 02:49:05 SkyScan query 02:49:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:49:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:06 Parameters OK 02:49:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:06 Set A/D data flow result=40 02:49:06 Set A/D channel type result=40 02:49:06 Set A/D encoding result=40 02:49:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:06 Set channel filter=0.000000e+000 result=40 02:49:06 Config A/D Result=40 02:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:06 Get A/D filter: -9.255963e+061 result=40 02:49:06 Get A/D value=-858993460 result=40 02:49:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:06 Parameters OK 02:49:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:06 Set A/D data flow result=40 02:49:06 Set A/D channel type result=40 02:49:06 Set A/D encoding result=40 02:49:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:06 Set channel filter=0.000000e+000 result=40 02:49:06 Config A/D Result=40 02:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:06 Get A/D filter: -9.255963e+061 result=40 02:49:06 Get A/D value=-858993460 result=40 02:49:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:49:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:49:06 Aux= 02:49:06 Message to Camera, serial 259866 queued 02:49:14 Received message from Master: op=Shutter serial=259876 02:49:14 Shutter LASER close 02:49:15 Received message from Master: op=PointingHead serial=259880 02:49:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:49:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:49:15 Point started: ret=0 02:49:15 point_skyscan result=0 02:49:16 Check angles 02:49:16 SkyScan query 02:49:16 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.04<-21536 Statuses=0009 0009 02:49:16 Msec=0 True Az=136.095 Ze=-143.04 Az status=0009 Ze status=0009 02:49:16 Check angles 02:49:16 SkyScan query 02:49:17 SkyScan query done: ret=0 az=153.975<-10265 ze=-121.68<-20112 Statuses=0009 0009 02:49:17 Msec=750 True Az=153.975 Ze=-121.68 Az status=0009 Ze status=0009 02:49:17 Check angles 02:49:17 SkyScan query 02:49:18 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.62<-18708 Statuses=0009 0009 02:49:18 Msec=1500 True Az=171.465 Ze=-100.62 Az status=0009 Ze status=0009 02:49:18 Check angles 02:49:18 SkyScan query 02:49:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.755<-17317 Statuses=0008 0009 02:49:19 Msec=2250 True Az=176.01 Ze=-79.755 Az status=0008 Ze status=0009 02:49:19 Check angles 02:49:19 SkyScan query 02:49:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.77<-15918 Statuses=0008 0009 02:49:19 Msec=3000 True Az=176.01 Ze=-58.77 Az status=0008 Ze status=0009 02:49:19 Check angles 02:49:19 SkyScan query 02:49:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 02:49:20 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 02:49:20 Message to Master queued w/err=0: serial=259880 error=0 02:49:25 Received message from Master: op=Filter serial=259881 02:49:25 Color wheel filter change from 0 to 0 02:49:25 FLIGetFilterPos err=0 currentPosition=0 02:49:25 FLIGetStepsRemaining err=0 RemainingSteps=0 02:49:25 Filter is already there-color wheel unchanged 02:49:25 Received message from Master: op=Shutter serial=259882 02:49:25 Shutter LASER close 02:49:25 Received message from Camera: op=State serial=259884 02:49:25 GetSingleValue result=40 Value=cccccccc 02:49:25 SkyScan query 02:49:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:49:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:26 Parameters OK 02:49:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:26 Set A/D data flow result=40 02:49:26 Set A/D channel type result=40 02:49:26 Set A/D encoding result=40 02:49:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:26 Set channel filter=0.000000e+000 result=40 02:49:26 Config A/D Result=40 02:49:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:26 Get A/D filter: -9.255963e+061 result=40 02:49:26 Get A/D value=-858993460 result=40 02:49:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:26 Parameters OK 02:49:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:26 Set A/D data flow result=40 02:49:26 Set A/D channel type result=40 02:49:26 Set A/D encoding result=40 02:49:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:26 Set channel filter=0.000000e+000 result=40 02:49:26 Config A/D Result=40 02:49:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:26 Get A/D filter: -9.255963e+061 result=40 02:49:26 Get A/D value=-858993460 result=40 02:49:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:49:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:49:26 Aux= 02:49:26 Message to Camera, serial 259884 queued 02:50:03 Received message from Master: op=PointingHead serial=259897 02:50:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:50:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:50:03 Point started: ret=0 02:50:03 point_skyscan result=0 02:50:04 Check angles 02:50:04 SkyScan query 02:50:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.345<-13423 Statuses=0008 0009 02:50:05 Msec=0 True Az=175.995 Ze=-21.345 Az status=0008 Ze status=0009 02:50:05 Check angles 02:50:05 SkyScan query 02:50:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-0<-12000 Statuses=0008 0009 02:50:05 Msec=750 True Az=175.995 Ze=-0 Az status=0008 Ze status=0009 02:50:06 Check angles 02:50:06 SkyScan query 02:50:06 SkyScan query done: ret=0 az=175.995<-11733 ze=20.985<-10601 Statuses=0008 0009 02:50:06 Msec=1500 True Az=175.995 Ze=20.985 Az status=0008 Ze status=0009 02:50:06 Check angles 02:50:06 SkyScan query 02:50:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 02:50:07 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 02:50:07 Check angles 02:50:07 SkyScan query 02:50:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 02:50:08 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 02:50:08 Message to Master queued w/err=0: serial=259897 error=0 02:50:13 Received message from Master: op=Filter serial=259898 02:50:13 Color wheel filter change from 0 to 0 02:50:13 FLIGetFilterPos err=0 currentPosition=0 02:50:13 FLIGetStepsRemaining err=0 RemainingSteps=0 02:50:13 Filter is already there-color wheel unchanged 02:50:13 Received message from Master: op=Shutter serial=259899 02:50:13 Shutter LASER close 02:50:13 Received message from Camera: op=State serial=259901 02:50:13 GetSingleValue result=40 Value=cccccccc 02:50:13 SkyScan query 02:50:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:50:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:13 Parameters OK 02:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:13 Set A/D data flow result=40 02:50:13 Set A/D channel type result=40 02:50:13 Set A/D encoding result=40 02:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:13 Set channel filter=0.000000e+000 result=40 02:50:13 Config A/D Result=40 02:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:13 Get A/D filter: -9.255963e+061 result=40 02:50:13 Get A/D value=-858993460 result=40 02:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:13 Parameters OK 02:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:13 Set A/D data flow result=40 02:50:13 Set A/D channel type result=40 02:50:13 Set A/D encoding result=40 02:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:13 Set channel filter=0.000000e+000 result=40 02:50:13 Config A/D Result=40 02:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:13 Get A/D filter: -9.255963e+061 result=40 02:50:13 Get A/D value=-858993460 result=40 02:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:50:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:50:13 Aux= 02:50:13 Message to Camera, serial 259901 queued 02:50:50 Received message from Master: op=PointingHead serial=259914 02:50:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:50:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:50:51 Point started: ret=0 02:50:51 point_skyscan result=0 02:50:51 Check angles 02:50:51 SkyScan query 02:50:52 SkyScan query done: ret=0 az=152.955<-10197 ze=8.685<-11421 Statuses=0009 0009 02:50:52 Msec=0 True Az=152.955 Ze=8.685 Az status=0009 Ze status=0009 02:50:52 Check angles 02:50:52 SkyScan query 02:50:53 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.255<-12817 Statuses=0009 0009 02:50:53 Msec=750 True Az=135.39 Ze=-12.255 Az status=0009 Ze status=0009 02:50:53 Check angles 02:50:53 SkyScan query 02:50:53 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.195<-14213 Statuses=0009 0009 02:50:53 Msec=1500 True Az=118.005 Ze=-33.195 Az status=0009 Ze status=0009 02:50:54 Check angles 02:50:54 SkyScan query 02:50:54 SkyScan query done: ret=0 az=100.605<-6707 ze=-51.54<-15436 Statuses=0009 0009 02:50:54 Msec=2250 True Az=100.605 Ze=-51.54 Az status=0009 Ze status=0009 02:50:54 Check angles 02:50:54 SkyScan query 02:50:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 02:50:55 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 02:50:55 Check angles 02:50:55 SkyScan query 02:50:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:50:56 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:50:56 Message to Master queued w/err=0: serial=259914 error=0 02:51:01 Received message from Master: op=Filter serial=259915 02:51:01 Color wheel filter change from 0 to 0 02:51:01 FLIGetFilterPos err=0 currentPosition=0 02:51:01 FLIGetStepsRemaining err=0 RemainingSteps=0 02:51:01 Filter is already there-color wheel unchanged 02:51:01 Received message from Master: op=Shutter serial=259916 02:51:01 Shutter LASER close 02:51:01 Received message from Camera: op=State serial=259918 02:51:01 GetSingleValue result=40 Value=cccccccc 02:51:01 SkyScan query 02:51:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:51:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:01 Parameters OK 02:51:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:01 Set A/D data flow result=40 02:51:01 Set A/D channel type result=40 02:51:01 Set A/D encoding result=40 02:51:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:01 Set channel filter=0.000000e+000 result=40 02:51:01 Config A/D Result=40 02:51:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:01 Get A/D filter: -9.255963e+061 result=40 02:51:01 Get A/D value=-858993460 result=40 02:51:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:01 Parameters OK 02:51:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:01 Set A/D data flow result=40 02:51:01 Set A/D channel type result=40 02:51:01 Set A/D encoding result=40 02:51:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:01 Set channel filter=0.000000e+000 result=40 02:51:01 Config A/D Result=40 02:51:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:01 Get A/D filter: -9.255963e+061 result=40 02:51:01 Get A/D value=-858993460 result=40 02:51:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:51:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:51:01 Aux= 02:51:01 Message to Camera, serial 259918 queued 02:51:38 Received message from Master: op=PointingHead serial=259931 02:51:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:51:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:51:39 Point started: ret=0 02:51:39 point_skyscan result=0 02:51:39 Check angles 02:51:39 SkyScan query 02:51:40 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.375<-17425 Statuses=0009 0009 02:51:40 Msec=0 True Az=109.17 Ze=-81.375 Az status=0009 Ze status=0009 02:51:40 Check angles 02:51:40 SkyScan query 02:51:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 02:51:41 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 02:51:41 Check angles 02:51:41 SkyScan query 02:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 02:51:42 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 02:51:42 Check angles 02:51:42 SkyScan query 02:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 02:51:42 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 02:51:42 Check angles 02:51:42 SkyScan query 02:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.63<-23042 Statuses=0008 0009 02:51:43 Msec=3000 True Az=112.995 Ze=-165.63 Az status=0008 Ze status=0009 02:51:43 Check angles 02:51:43 SkyScan query 02:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:51:44 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:51:44 Message to Master queued w/err=0: serial=259931 error=0 02:51:49 Received message from Master: op=Filter serial=259932 02:51:49 Color wheel filter change from 0 to 0 02:51:49 FLIGetFilterPos err=0 currentPosition=0 02:51:49 FLIGetStepsRemaining err=0 RemainingSteps=0 02:51:49 Filter is already there-color wheel unchanged 02:51:49 Received message from Master: op=Shutter serial=259933 02:51:49 Shutter LASER open 02:51:49 Received message from Camera: op=State serial=259935 02:51:49 GetSingleValue result=40 Value=cccccccc 02:51:49 SkyScan query 02:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:51:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:50 Parameters OK 02:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:50 Set A/D data flow result=40 02:51:50 Set A/D channel type result=40 02:51:50 Set A/D encoding result=40 02:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:50 Set channel filter=0.000000e+000 result=40 02:51:50 Config A/D Result=40 02:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:50 Get A/D filter: -9.255963e+061 result=40 02:51:50 Get A/D value=-858993460 result=40 02:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:50 Parameters OK 02:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:50 Set A/D data flow result=40 02:51:50 Set A/D channel type result=40 02:51:50 Set A/D encoding result=40 02:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:50 Set channel filter=0.000000e+000 result=40 02:51:50 Config A/D Result=40 02:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:50 Get A/D filter: -9.255963e+061 result=40 02:51:50 Get A/D value=-858993460 result=40 02:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:51:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:51:50 Aux= 02:51:50 Message to Camera, serial 259935 queued 02:51:58 Received message from Master: op=Shutter serial=259945 02:51:58 Shutter LASER close 02:51:59 Received message from Master: op=PointingHead serial=259949 02:51:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:51:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:51:59 Point started: ret=0 02:51:59 point_skyscan result=0 02:52:00 Check angles 02:52:00 SkyScan query 02:52:00 SkyScan query done: ret=0 az=89.85<-5990 ze=157.275<-1515 Statuses=0009 0009 02:52:00 Msec=0 True Az=89.85 Ze=157.275 Az status=0009 Ze status=0009 02:52:00 Check angles 02:52:00 SkyScan query 02:52:01 SkyScan query done: ret=0 az=72.045<-4803 ze=135.915<-2939 Statuses=0009 0009 02:52:01 Msec=750 True Az=72.045 Ze=135.915 Az status=0009 Ze status=0009 02:52:01 Check angles 02:52:01 SkyScan query 02:52:02 SkyScan query done: ret=0 az=54.51<-3634 ze=114.93<-4338 Statuses=0009 0009 02:52:02 Msec=1500 True Az=54.51 Ze=114.93 Az status=0009 Ze status=0009 02:52:02 Check angles 02:52:02 SkyScan query 02:52:02 SkyScan query done: ret=0 az=40.995<-2733 ze=93.99<-5734 Statuses=0009 0009 02:52:02 Msec=2250 True Az=40.995 Ze=93.99 Az status=0009 Ze status=0009 02:52:03 Check angles 02:52:03 SkyScan query 02:52:03 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 02:52:03 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 02:52:03 Check angles 02:52:03 SkyScan query 02:52:04 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 02:52:04 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 02:52:04 Check angles 02:52:04 SkyScan query 02:52:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:52:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:52:05 Message to Master queued w/err=0: serial=259949 error=0 02:52:10 Received message from Master: op=Filter serial=259950 02:52:10 Color wheel filter change from 0 to 0 02:52:10 FLIGetFilterPos err=0 currentPosition=0 02:52:10 FLIGetStepsRemaining err=0 RemainingSteps=0 02:52:10 Filter is already there-color wheel unchanged 02:52:10 Received message from Master: op=Shutter serial=259951 02:52:10 Shutter LASER close 02:52:10 Received message from Camera: op=State serial=259953 02:52:10 GetSingleValue result=40 Value=cccccccc 02:52:10 SkyScan query 02:52:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:52:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:11 Parameters OK 02:52:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:11 Set A/D data flow result=40 02:52:11 Set A/D channel type result=40 02:52:11 Set A/D encoding result=40 02:52:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:11 Set channel filter=0.000000e+000 result=40 02:52:11 Config A/D Result=40 02:52:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:11 Get A/D filter: -9.255963e+061 result=40 02:52:11 Get A/D value=-858993460 result=40 02:52:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:11 Parameters OK 02:52:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:11 Set A/D data flow result=40 02:52:11 Set A/D channel type result=40 02:52:11 Set A/D encoding result=40 02:52:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:11 Set channel filter=0.000000e+000 result=40 02:52:11 Config A/D Result=40 02:52:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:11 Get A/D filter: -9.255963e+061 result=40 02:52:11 Get A/D value=-858993460 result=40 02:52:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:52:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:52:11 Aux= 02:52:11 Message to Camera, serial 259953 queued 02:52:47 Received message from Master: op=PointingHead serial=259966 02:52:47 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:52:47 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:52:48 Point started: ret=0 02:52:48 point_skyscan result=0 02:52:49 Check angles 02:52:49 SkyScan query 02:52:49 SkyScan query done: ret=0 az=64.29<-4286 ze=66.555<-7563 Statuses=0009 0008 02:52:49 Msec=0 True Az=64.29 Ze=66.555 Az status=0009 Ze status=0008 02:52:49 Check angles 02:52:49 SkyScan query 02:52:50 SkyScan query done: ret=0 az=81.72<-5448 ze=66.51<-7566 Statuses=0009 0008 02:52:50 Msec=750 True Az=81.72 Ze=66.51 Az status=0009 Ze status=0008 02:52:50 Check angles 02:52:50 SkyScan query 02:52:51 SkyScan query done: ret=0 az=99.66<-6644 ze=66.495<-7567 Statuses=0009 0008 02:52:51 Msec=1500 True Az=99.66 Ze=66.495 Az status=0009 Ze status=0008 02:52:51 Check angles 02:52:51 SkyScan query 02:52:51 SkyScan query done: ret=0 az=117.045<-7803 ze=66.495<-7567 Statuses=0009 0008 02:52:51 Msec=2250 True Az=117.045 Ze=66.495 Az status=0009 Ze status=0008 02:52:52 Check angles 02:52:52 SkyScan query 02:52:52 SkyScan query done: ret=0 az=134.505<-8967 ze=66.495<-7567 Statuses=0009 0008 02:52:52 Msec=3000 True Az=134.505 Ze=66.495 Az status=0009 Ze status=0008 02:52:52 Check angles 02:52:52 SkyScan query 02:52:53 SkyScan query done: ret=0 az=151.89<-10126 ze=66.495<-7567 Statuses=0009 0008 02:52:53 Msec=3750 True Az=151.89 Ze=66.495 Az status=0009 Ze status=0008 02:52:53 Check angles 02:52:53 SkyScan query 02:52:54 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:52:54 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:52:54 Message to Master queued w/err=0: serial=259966 error=0 02:52:59 Received message from Master: op=Filter serial=259967 02:52:59 Color wheel filter change from 0 to 0 02:52:59 FLIGetFilterPos err=0 currentPosition=0 02:52:59 FLIGetStepsRemaining err=0 RemainingSteps=0 02:52:59 Filter is already there-color wheel unchanged 02:52:59 Received message from Master: op=Shutter serial=259968 02:52:59 Shutter LASER close 02:52:59 Received message from Camera: op=State serial=259970 02:52:59 GetSingleValue result=40 Value=cccccccc 02:52:59 SkyScan query 02:52:59 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:52:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:59 Parameters OK 02:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:59 Set A/D data flow result=40 02:52:59 Set A/D channel type result=40 02:52:59 Set A/D encoding result=40 02:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:59 Set channel filter=0.000000e+000 result=40 02:52:59 Config A/D Result=40 02:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:59 Get A/D filter: -9.255963e+061 result=40 02:52:59 Get A/D value=-858993460 result=40 02:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:59 Parameters OK 02:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:59 Set A/D data flow result=40 02:52:59 Set A/D channel type result=40 02:52:59 Set A/D encoding result=40 02:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:59 Set channel filter=0.000000e+000 result=40 02:52:59 Config A/D Result=40 02:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:59 Get A/D filter: -9.255963e+061 result=40 02:52:59 Get A/D value=-858993460 result=40 02:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:59 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:52:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:52:59 Aux= 02:52:59 Message to Camera, serial 259970 queued 02:53:36 Received message from Master: op=PointingHead serial=259983 02:53:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:53:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:53:37 Point started: ret=0 02:53:37 point_skyscan result=0 02:53:37 Check angles 02:53:37 SkyScan query 02:53:38 SkyScan query done: ret=0 az=134.955<-8997 ze=36.66<-9556 Statuses=0009 0009 02:53:38 Msec=0 True Az=134.955 Ze=36.66 Az status=0009 Ze status=0009 02:53:38 Check angles 02:53:38 SkyScan query 02:53:39 SkyScan query done: ret=0 az=117.48<-7832 ze=15.72<-10952 Statuses=0009 0009 02:53:39 Msec=750 True Az=117.48 Ze=15.72 Az status=0009 Ze status=0009 02:53:39 Check angles 02:53:39 SkyScan query 02:53:39 SkyScan query done: ret=0 az=100.095<-6673 ze=-5.25<-12350 Statuses=0009 0009 02:53:39 Msec=1500 True Az=100.095 Ze=-5.25 Az status=0009 Ze status=0009 02:53:40 Check angles 02:53:40 SkyScan query 02:53:40 SkyScan query done: ret=0 az=82.59<-5506 ze=-26.22<-13748 Statuses=0009 0009 02:53:40 Msec=2250 True Az=82.59 Ze=-26.22 Az status=0009 Ze status=0009 02:53:40 Check angles 02:53:40 SkyScan query 02:53:41 SkyScan query done: ret=0 az=65.055<-4337 ze=-38.58<-14572 Statuses=0009 0008 02:53:41 Msec=3000 True Az=65.055 Ze=-38.58 Az status=0009 Ze status=0008 02:53:41 Check angles 02:53:41 SkyScan query 02:53:42 SkyScan query done: ret=0 az=47.625<-3175 ze=-38.52<-14568 Statuses=0009 0008 02:53:42 Msec=3750 True Az=47.625 Ze=-38.52 Az status=0009 Ze status=0008 02:53:42 Check angles 02:53:42 SkyScan query 02:53:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:53:42 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:53:42 Message to Master queued w/err=0: serial=259983 error=0 02:53:47 Received message from Master: op=Filter serial=259984 02:53:47 Color wheel filter change from 0 to 0 02:53:47 FLIGetFilterPos err=0 currentPosition=0 02:53:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:53:47 Filter is already there-color wheel unchanged 02:53:48 Received message from Master: op=Shutter serial=259985 02:53:48 Shutter LASER close 02:53:48 Received message from Camera: op=State serial=259987 02:53:48 GetSingleValue result=40 Value=cccccccc 02:53:48 SkyScan query 02:53:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:53:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:48 Parameters OK 02:53:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:48 Set A/D data flow result=40 02:53:48 Set A/D channel type result=40 02:53:48 Set A/D encoding result=40 02:53:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:48 Set channel filter=0.000000e+000 result=40 02:53:48 Config A/D Result=40 02:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:48 Get A/D filter: -9.255963e+061 result=40 02:53:48 Get A/D value=-858993460 result=40 02:53:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:48 Parameters OK 02:53:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:48 Set A/D data flow result=40 02:53:48 Set A/D channel type result=40 02:53:48 Set A/D encoding result=40 02:53:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:48 Set channel filter=0.000000e+000 result=40 02:53:48 Config A/D Result=40 02:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:48 Get A/D filter: -9.255963e+061 result=40 02:53:48 Get A/D value=-858993460 result=40 02:53:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:53:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:53:48 Aux= 02:53:48 Message to Camera, serial 259987 queued 02:54:24 Received message from Master: op=PointingHead serial=259999 02:54:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:54:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:54:25 Point started: ret=0 02:54:25 point_skyscan result=0 02:54:25 Check angles 02:54:25 SkyScan query 02:54:26 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.55<-16570 Statuses=0009 0009 02:54:26 Msec=0 True Az=64.185 Ze=-68.55 Az status=0009 Ze status=0009 02:54:26 Check angles 02:54:26 SkyScan query 02:54:27 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.535<-17969 Statuses=0009 0009 02:54:27 Msec=750 True Az=81.66 Ze=-89.535 Az status=0009 Ze status=0009 02:54:27 Check angles 02:54:27 SkyScan query 02:54:27 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.475<-19365 Statuses=0009 0009 02:54:27 Msec=1500 True Az=99.165 Ze=-110.475 Az status=0009 Ze status=0009 02:54:28 Check angles 02:54:28 SkyScan query 02:54:28 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.4<-20760 Statuses=0009 0009 02:54:28 Msec=2250 True Az=116.52 Ze=-131.4 Az status=0009 Ze status=0009 02:54:28 Check angles 02:54:28 SkyScan query 02:54:29 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 02:54:29 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 02:54:29 Check angles 02:54:29 SkyScan query 02:54:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:54:30 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:54:30 Message to Master queued w/err=0: serial=259999 error=0 02:54:35 Received message from Master: op=Filter serial=260000 02:54:35 Color wheel filter change from 0 to 0 02:54:35 FLIGetFilterPos err=0 currentPosition=0 02:54:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:54:35 Filter is already there-color wheel unchanged 02:54:35 Received message from Master: op=Shutter serial=260001 02:54:35 Shutter LASER close 02:54:35 Received message from Camera: op=State serial=260003 02:54:35 GetSingleValue result=40 Value=cccccccc 02:54:35 SkyScan query 02:54:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:54:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:35 Parameters OK 02:54:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:35 Set A/D data flow result=40 02:54:35 Set A/D channel type result=40 02:54:35 Set A/D encoding result=40 02:54:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:35 Set channel filter=0.000000e+000 result=40 02:54:35 Config A/D Result=40 02:54:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:35 Get A/D filter: -9.255963e+061 result=40 02:54:35 Get A/D value=-858993460 result=40 02:54:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:35 Parameters OK 02:54:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:35 Set A/D data flow result=40 02:54:35 Set A/D channel type result=40 02:54:35 Set A/D encoding result=40 02:54:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:35 Set channel filter=0.000000e+000 result=40 02:54:35 Config A/D Result=40 02:54:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:35 Get A/D filter: -9.255963e+061 result=40 02:54:35 Get A/D value=-858993460 result=40 02:54:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:54:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:54:35 Aux= 02:54:35 Message to Camera, serial 260003 queued 02:55:11 Received message from Master: op=PointingHead serial=260015 02:55:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:55:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:55:12 Point started: ret=0 02:55:12 point_skyscan result=0 02:55:12 Check angles 02:55:12 SkyScan query 02:55:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.255<-23417 Statuses=0009 0009 02:55:13 Msec=0 True Az=113.01 Ze=-171.255 Az status=0009 Ze status=0009 02:55:13 Check angles 02:55:13 SkyScan query 02:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:55:14 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:55:14 Message to Master queued w/err=0: serial=260015 error=0 02:55:19 Received message from Master: op=Filter serial=260016 02:55:19 Color wheel filter change from 0 to 0 02:55:19 FLIGetFilterPos err=0 currentPosition=0 02:55:19 FLIGetStepsRemaining err=0 RemainingSteps=0 02:55:19 Filter is already there-color wheel unchanged 02:55:19 Received message from Master: op=Shutter serial=260017 02:55:19 Shutter LASER open 02:55:19 Received message from Camera: op=State serial=260019 02:55:19 GetSingleValue result=40 Value=cccccccc 02:55:19 SkyScan query 02:55:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:55:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:20 Parameters OK 02:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:20 Set A/D data flow result=40 02:55:20 Set A/D channel type result=40 02:55:20 Set A/D encoding result=40 02:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:20 Set channel filter=0.000000e+000 result=40 02:55:20 Config A/D Result=40 02:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:20 Get A/D filter: -9.255963e+061 result=40 02:55:20 Get A/D value=-858993460 result=40 02:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:20 Parameters OK 02:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:20 Set A/D data flow result=40 02:55:20 Set A/D channel type result=40 02:55:20 Set A/D encoding result=40 02:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:20 Set channel filter=0.000000e+000 result=40 02:55:20 Config A/D Result=40 02:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:20 Get A/D filter: -9.255963e+061 result=40 02:55:20 Get A/D value=-858993460 result=40 02:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:55:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:55:20 Aux= 02:55:20 Message to Camera, serial 260019 queued 02:55:28 Received message from Master: op=Shutter serial=260029 02:55:28 Shutter LASER close 02:55:29 Received message from Master: op=PointingHead serial=260033 02:55:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:55:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:55:29 Point started: ret=0 02:55:29 point_skyscan result=0 02:55:30 Check angles 02:55:30 SkyScan query 02:55:30 SkyScan query done: ret=0 az=135.795<-9053 ze=-143.565<-21571 Statuses=0009 0009 02:55:30 Msec=0 True Az=135.795 Ze=-143.565 Az status=0009 Ze status=0009 02:55:31 Check angles 02:55:31 SkyScan query 02:55:31 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.58<-20172 Statuses=0009 0009 02:55:31 Msec=750 True Az=153.3 Ze=-122.58 Az status=0009 Ze status=0009 02:55:31 Check angles 02:55:31 SkyScan query 02:55:32 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.7<-18780 Statuses=0009 0009 02:55:32 Msec=1500 True Az=170.79 Ze=-101.7 Az status=0009 Ze status=0009 02:55:32 Check angles 02:55:32 SkyScan query 02:55:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.67<-17378 Statuses=0008 0009 02:55:33 Msec=2250 True Az=176.01 Ze=-80.67 Az status=0008 Ze status=0009 02:55:33 Check angles 02:55:33 SkyScan query 02:55:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.76<-15984 Statuses=0008 0009 02:55:33 Msec=3000 True Az=176.01 Ze=-59.76 Az status=0008 Ze status=0009 02:55:34 Check angles 02:55:34 SkyScan query 02:55:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:55:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:55:34 Message to Master queued w/err=0: serial=260033 error=0 02:55:39 Received message from Master: op=Filter serial=260034 02:55:39 Color wheel filter change from 0 to 0 02:55:39 FLIGetFilterPos err=0 currentPosition=0 02:55:39 FLIGetStepsRemaining err=0 RemainingSteps=0 02:55:39 Filter is already there-color wheel unchanged [UTC 2018-12-19 02:55:39] 02:55:39 Received message from Master: op=Shutter serial=260035 02:55:39 Shutter LASER close 02:55:39 Received message from Camera: op=State serial=260037 02:55:39 GetSingleValue result=40 Value=cccccccc 02:55:39 SkyScan query 02:55:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:55:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:40 Parameters OK 02:55:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:40 Set A/D data flow result=40 02:55:40 Set A/D channel type result=40 02:55:40 Set A/D encoding result=40 02:55:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:40 Set channel filter=0.000000e+000 result=40 02:55:40 Config A/D Result=40 02:55:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:40 Get A/D filter: -9.255963e+061 result=40 02:55:40 Get A/D value=-858993460 result=40 02:55:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:40 Parameters OK 02:55:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:40 Set A/D data flow result=40 02:55:40 Set A/D channel type result=40 02:55:40 Set A/D encoding result=40 02:55:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:40 Set channel filter=0.000000e+000 result=40 02:55:40 Config A/D Result=40 02:55:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:40 Get A/D filter: -9.255963e+061 result=40 02:55:40 Get A/D value=-858993460 result=40 02:55:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:55:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:55:40 Aux= 02:55:40 Message to Camera, serial 260037 queued [UTC 2018-12-19 02:55:52] 02:56:17 Received message from Master: op=PointingHead serial=260050 02:56:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:56:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:56:17 Point started: ret=0 02:56:17 point_skyscan result=0 02:56:18 Check angles 02:56:18 SkyScan query 02:56:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.72<-13448 Statuses=0008 0009 02:56:19 Msec=0 True Az=175.995 Ze=-21.72 Az status=0008 Ze status=0009 02:56:19 Check angles 02:56:19 SkyScan query 02:56:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.765<-12051 Statuses=0008 0009 02:56:19 Msec=750 True Az=175.995 Ze=-0.765 Az status=0008 Ze status=0009 02:56:20 Check angles 02:56:20 SkyScan query 02:56:20 SkyScan query done: ret=0 az=175.995<-11733 ze=20.19<-10654 Statuses=0008 0009 02:56:20 Msec=1500 True Az=175.995 Ze=20.19 Az status=0008 Ze status=0009 02:56:20 Check angles 02:56:20 SkyScan query 02:56:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 02:56:21 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 02:56:21 Check angles 02:56:21 SkyScan query 02:56:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 02:56:22 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 02:56:22 Message to Master queued w/err=0: serial=260050 error=0 02:56:27 Received message from Master: op=Filter serial=260051 02:56:27 Color wheel filter change from 0 to 0 02:56:27 FLIGetFilterPos err=0 currentPosition=0 02:56:27 FLIGetStepsRemaining err=0 RemainingSteps=0 02:56:27 Filter is already there-color wheel unchanged 02:56:27 Received message from Master: op=Shutter serial=260052 02:56:27 Shutter LASER close 02:56:27 Received message from Camera: op=State serial=260054 02:56:27 GetSingleValue result=40 Value=cccccccc 02:56:27 SkyScan query 02:56:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:56:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:28 Parameters OK 02:56:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:28 Set A/D data flow result=40 02:56:28 Set A/D channel type result=40 02:56:28 Set A/D encoding result=40 02:56:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:28 Set channel filter=0.000000e+000 result=40 02:56:28 Config A/D Result=40 02:56:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:28 Get A/D filter: -9.255963e+061 result=40 02:56:28 Get A/D value=-858993460 result=40 02:56:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:28 Parameters OK 02:56:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:28 Set A/D data flow result=40 02:56:28 Set A/D channel type result=40 02:56:28 Set A/D encoding result=40 02:56:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:28 Set channel filter=0.000000e+000 result=40 02:56:28 Config A/D Result=40 02:56:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:28 Get A/D filter: -9.255963e+061 result=40 02:56:28 Get A/D value=-858993460 result=40 02:56:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:56:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:56:28 Aux= 02:56:28 Message to Camera, serial 260054 queued 02:57:04 Received message from Master: op=PointingHead serial=260067 02:57:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:57:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:57:05 Point started: ret=0 02:57:05 point_skyscan result=0 02:57:05 Check angles 02:57:05 SkyScan query 02:57:06 SkyScan query done: ret=0 az=153.195<-10213 ze=8.97<-11402 Statuses=0009 0009 02:57:06 Msec=0 True Az=153.195 Ze=8.97 Az status=0009 Ze status=0009 02:57:06 Check angles 02:57:06 SkyScan query 02:57:07 SkyScan query done: ret=0 az=135.75<-9050 ze=-12.03<-12802 Statuses=0009 0009 02:57:07 Msec=750 True Az=135.75 Ze=-12.03 Az status=0009 Ze status=0009 02:57:07 Check angles 02:57:07 SkyScan query 02:57:08 SkyScan query done: ret=0 az=118.215<-7881 ze=-32.925<-14195 Statuses=0009 0009 02:57:08 Msec=1500 True Az=118.215 Ze=-32.925 Az status=0009 Ze status=0009 02:57:08 Check angles 02:57:08 SkyScan query 02:57:08 SkyScan query done: ret=0 az=100.86<-6724 ze=-51.495<-15433 Statuses=0009 0009 02:57:08 Msec=2250 True Az=100.86 Ze=-51.495 Az status=0009 Ze status=0009 02:57:08 Check angles 02:57:08 SkyScan query 02:57:09 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 02:57:09 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 02:57:09 Check angles 02:57:09 SkyScan query 02:57:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:57:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:57:10 Message to Master queued w/err=0: serial=260067 error=0 02:57:15 Received message from Master: op=Filter serial=260068 02:57:15 Color wheel filter change from 0 to 0 02:57:15 FLIGetFilterPos err=0 currentPosition=0 02:57:15 FLIGetStepsRemaining err=0 RemainingSteps=0 02:57:15 Filter is already there-color wheel unchanged 02:57:15 Received message from Master: op=Shutter serial=260069 02:57:15 Shutter LASER close 02:57:15 Received message from Camera: op=State serial=260071 02:57:15 GetSingleValue result=40 Value=cccccccc 02:57:15 SkyScan query 02:57:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:57:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:16 Parameters OK 02:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:16 Set A/D data flow result=40 02:57:16 Set A/D channel type result=40 02:57:16 Set A/D encoding result=40 02:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:16 Set channel filter=0.000000e+000 result=40 02:57:16 Config A/D Result=40 02:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:16 Get A/D filter: -9.255963e+061 result=40 02:57:16 Get A/D value=-858993460 result=40 02:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:16 Parameters OK 02:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:16 Set A/D data flow result=40 02:57:16 Set A/D channel type result=40 02:57:16 Set A/D encoding result=40 02:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:16 Set channel filter=0.000000e+000 result=40 02:57:16 Config A/D Result=40 02:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:16 Get A/D filter: -9.255963e+061 result=40 02:57:16 Get A/D value=-858993460 result=40 02:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:57:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:57:16 Aux= 02:57:16 Message to Camera, serial 260071 queued 02:57:52 Received message from Master: op=PointingHead serial=260084 02:57:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:57:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:57:53 Point started: ret=0 02:57:53 point_skyscan result=0 02:57:53 Check angles 02:57:53 SkyScan query 02:57:54 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.33<-17422 Statuses=0009 0009 02:57:54 Msec=0 True Az=109.035 Ze=-81.33 Az status=0009 Ze status=0009 02:57:54 Check angles 02:57:54 SkyScan query 02:57:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.3<-18820 Statuses=0008 0009 02:57:55 Msec=750 True Az=112.995 Ze=-102.3 Az status=0008 Ze status=0009 02:57:55 Check angles 02:57:55 SkyScan query 02:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 02:57:56 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 02:57:56 Check angles 02:57:56 SkyScan query 02:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.21<-21614 Statuses=0008 0009 02:57:56 Msec=2250 True Az=112.995 Ze=-144.21 Az status=0008 Ze status=0009 02:57:56 Check angles 02:57:56 SkyScan query 02:57:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.15<-23010 Statuses=0008 0009 02:57:57 Msec=3000 True Az=112.995 Ze=-165.15 Az status=0008 Ze status=0009 02:57:57 Check angles 02:57:57 SkyScan query 02:57:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:57:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:57:58 Message to Master queued w/err=0: serial=260084 error=0 02:58:03 Received message from Master: op=Filter serial=260085 02:58:03 Color wheel filter change from 0 to 0 02:58:03 FLIGetFilterPos err=0 currentPosition=0 02:58:03 FLIGetStepsRemaining err=0 RemainingSteps=0 02:58:03 Filter is already there-color wheel unchanged 02:58:03 Received message from Master: op=Shutter serial=260086 02:58:03 Shutter LASER open 02:58:03 Received message from Camera: op=State serial=260088 02:58:03 GetSingleValue result=40 Value=cccccccc 02:58:03 SkyScan query 02:58:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:58:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:04 Parameters OK 02:58:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:04 Set A/D data flow result=40 02:58:04 Set A/D channel type result=40 02:58:04 Set A/D encoding result=40 02:58:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:04 Set channel filter=0.000000e+000 result=40 02:58:04 Config A/D Result=40 02:58:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:04 Get A/D filter: -9.255963e+061 result=40 02:58:04 Get A/D value=-858993460 result=40 02:58:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:04 Parameters OK 02:58:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:04 Set A/D data flow result=40 02:58:04 Set A/D channel type result=40 02:58:04 Set A/D encoding result=40 02:58:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:04 Set channel filter=0.000000e+000 result=40 02:58:04 Config A/D Result=40 02:58:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:04 Get A/D filter: -9.255963e+061 result=40 02:58:04 Get A/D value=-858993460 result=40 02:58:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:58:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:58:04 Aux= 02:58:04 Message to Camera, serial 260088 queued 02:58:12 Received message from Master: op=Shutter serial=260098 02:58:12 Shutter LASER close 02:58:13 Received message from Master: op=PointingHead serial=260102 02:58:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:58:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:58:13 Point started: ret=0 02:58:13 point_skyscan result=0 02:58:14 Check angles 02:58:14 SkyScan query 02:58:14 SkyScan query done: ret=0 az=89.88<-5992 ze=157.26<-1516 Statuses=0009 0009 02:58:14 Msec=0 True Az=89.88 Ze=157.26 Az status=0009 Ze status=0009 02:58:15 Check angles 02:58:15 SkyScan query 02:58:15 SkyScan query done: ret=0 az=72.3<-4820 ze=136.275<-2915 Statuses=0009 0009 02:58:15 Msec=750 True Az=72.3 Ze=136.275 Az status=0009 Ze status=0009 02:58:15 Check angles 02:58:15 SkyScan query 02:58:16 SkyScan query done: ret=0 az=54.975<-3665 ze=115.365<-4309 Statuses=0009 0009 02:58:16 Msec=1500 True Az=54.975 Ze=115.365 Az status=0009 Ze status=0009 02:58:16 Check angles 02:58:16 SkyScan query 02:58:17 SkyScan query done: ret=0 az=40.995<-2733 ze=94.365<-5709 Statuses=0009 0009 02:58:17 Msec=2250 True Az=40.995 Ze=94.365 Az status=0009 Ze status=0009 02:58:17 Check angles 02:58:17 SkyScan query 02:58:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 02:58:17 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 02:58:18 Check angles 02:58:18 SkyScan query 02:58:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.86<-8476 Statuses=0008 0009 02:58:18 Msec=3750 True Az=40.995 Ze=52.86 Az status=0008 Ze status=0009 02:58:18 Check angles 02:58:18 SkyScan query 02:58:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:58:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:58:19 Message to Master queued w/err=0: serial=260102 error=0 02:58:24 Received message from Master: op=Filter serial=260103 02:58:24 Color wheel filter change from 0 to 0 02:58:24 FLIGetFilterPos err=0 currentPosition=0 02:58:24 FLIGetStepsRemaining err=0 RemainingSteps=0 02:58:24 Filter is already there-color wheel unchanged 02:58:24 Received message from Master: op=Shutter serial=260104 02:58:24 Shutter LASER close 02:58:24 Received message from Camera: op=State serial=260106 02:58:24 GetSingleValue result=40 Value=cccccccc 02:58:24 SkyScan query 02:58:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:58:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:25 Parameters OK 02:58:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:25 Set A/D data flow result=40 02:58:25 Set A/D channel type result=40 02:58:25 Set A/D encoding result=40 02:58:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:25 Set channel filter=0.000000e+000 result=40 02:58:25 Config A/D Result=40 02:58:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:25 Get A/D filter: -9.255963e+061 result=40 02:58:25 Get A/D value=-858993460 result=40 02:58:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:25 Parameters OK 02:58:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:25 Set A/D data flow result=40 02:58:25 Set A/D channel type result=40 02:58:25 Set A/D encoding result=40 02:58:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:25 Set channel filter=0.000000e+000 result=40 02:58:25 Config A/D Result=40 02:58:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:25 Get A/D filter: -9.255963e+061 result=40 02:58:25 Get A/D value=-858993460 result=40 02:58:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:58:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:58:25 Aux= 02:58:25 Message to Camera, serial 260106 queued 02:59:02 Received message from Master: op=PointingHead serial=260119 02:59:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 02:59:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 02:59:02 Point started: ret=0 02:59:02 point_skyscan result=0 02:59:03 Check angles 02:59:03 SkyScan query 02:59:03 SkyScan query done: ret=0 az=63.885<-4259 ze=66.54<-7564 Statuses=0009 0008 02:59:03 Msec=0 True Az=63.885 Ze=66.54 Az status=0009 Ze status=0008 02:59:03 Check angles 02:59:03 SkyScan query 02:59:04 SkyScan query done: ret=0 az=81.36<-5424 ze=66.51<-7566 Statuses=0009 0008 02:59:04 Msec=750 True Az=81.36 Ze=66.51 Az status=0009 Ze status=0008 02:59:04 Check angles 02:59:04 SkyScan query 02:59:05 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 02:59:05 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 02:59:05 Check angles 02:59:05 SkyScan query 02:59:06 SkyScan query done: ret=0 az=116.175<-7745 ze=66.495<-7567 Statuses=0009 0008 02:59:06 Msec=2250 True Az=116.175 Ze=66.495 Az status=0009 Ze status=0008 02:59:06 Check angles 02:59:06 SkyScan query 02:59:06 SkyScan query done: ret=0 az=133.755<-8917 ze=66.495<-7567 Statuses=0009 0008 02:59:06 Msec=3000 True Az=133.755 Ze=66.495 Az status=0009 Ze status=0008 02:59:06 Check angles 02:59:06 SkyScan query 02:59:07 SkyScan query done: ret=0 az=151.2<-10080 ze=66.495<-7567 Statuses=0009 0008 02:59:07 Msec=3750 True Az=151.2 Ze=66.495 Az status=0009 Ze status=0008 02:59:07 Check angles 02:59:07 SkyScan query 02:59:08 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 02:59:08 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 02:59:08 Message to Master queued w/err=0: serial=260119 error=0 02:59:13 Received message from Master: op=Filter serial=260120 02:59:13 Color wheel filter change from 0 to 0 02:59:13 FLIGetFilterPos err=0 currentPosition=0 02:59:13 FLIGetStepsRemaining err=0 RemainingSteps=0 02:59:13 Filter is already there-color wheel unchanged 02:59:13 Received message from Master: op=Shutter serial=260121 02:59:13 Shutter LASER close 02:59:13 Received message from Camera: op=State serial=260123 02:59:13 GetSingleValue result=40 Value=cccccccc 02:59:13 SkyScan query 02:59:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 02:59:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:14 Parameters OK 02:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:14 Set A/D data flow result=40 02:59:14 Set A/D channel type result=40 02:59:14 Set A/D encoding result=40 02:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:14 Set channel filter=0.000000e+000 result=40 02:59:14 Config A/D Result=40 02:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:14 Get A/D filter: -9.255963e+061 result=40 02:59:14 Get A/D value=-858993460 result=40 02:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:14 Parameters OK 02:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:14 Set A/D data flow result=40 02:59:14 Set A/D channel type result=40 02:59:14 Set A/D encoding result=40 02:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:14 Set channel filter=0.000000e+000 result=40 02:59:14 Config A/D Result=40 02:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:14 Get A/D filter: -9.255963e+061 result=40 02:59:14 Get A/D value=-858993460 result=40 02:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:59:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:59:14 Aux= 02:59:14 Message to Camera, serial 260123 queued 02:59:50 Received message from Master: op=PointingHead serial=260136 02:59:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:59:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:59:51 Point started: ret=0 02:59:51 point_skyscan result=0 02:59:52 Check angles 02:59:52 SkyScan query 02:59:52 SkyScan query done: ret=0 az=134.58<-8972 ze=36.39<-9574 Statuses=0009 0009 02:59:52 Msec=0 True Az=134.58 Ze=36.39 Az status=0009 Ze status=0009 02:59:52 Check angles 02:59:52 SkyScan query 02:59:53 SkyScan query done: ret=0 az=116.85<-7790 ze=14.97<-11002 Statuses=0009 0009 02:59:53 Msec=750 True Az=116.85 Ze=14.97 Az status=0009 Ze status=0009 02:59:53 Check angles 02:59:53 SkyScan query 02:59:54 SkyScan query done: ret=0 az=99.45<-6630 ze=-6.015<-12401 Statuses=0009 0009 02:59:54 Msec=1500 True Az=99.45 Ze=-6.015 Az status=0009 Ze status=0009 02:59:54 Check angles 02:59:54 SkyScan query 02:59:54 SkyScan query done: ret=0 az=81.975<-5465 ze=-26.985<-13799 Statuses=0009 0009 02:59:54 Msec=2250 True Az=81.975 Ze=-26.985 Az status=0009 Ze status=0009 02:59:55 Check angles 02:59:55 SkyScan query 02:59:55 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.58<-14572 Statuses=0009 0008 02:59:55 Msec=3000 True Az=64.44 Ze=-38.58 Az status=0009 Ze status=0008 02:59:55 Check angles 02:59:55 SkyScan query 02:59:56 SkyScan query done: ret=0 az=47.01<-3134 ze=-38.52<-14568 Statuses=0009 0008 02:59:56 Msec=3750 True Az=47.01 Ze=-38.52 Az status=0009 Ze status=0008 02:59:56 Check angles 02:59:56 SkyScan query 02:59:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:59:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 02:59:57 Message to Master queued w/err=0: serial=260136 error=0 03:00:02 Received message from Master: op=Filter serial=260137 03:00:02 Color wheel filter change from 0 to 0 03:00:02 FLIGetFilterPos err=0 currentPosition=0 03:00:02 FLIGetStepsRemaining err=0 RemainingSteps=0 03:00:02 Filter is already there-color wheel unchanged 03:00:02 Received message from Master: op=Shutter serial=260138 03:00:02 Shutter LASER close 03:00:02 Received message from Camera: op=State serial=260140 03:00:02 GetSingleValue result=40 Value=cccccccc 03:00:02 SkyScan query 03:00:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:00:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:02 Parameters OK 03:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:02 Set A/D data flow result=40 03:00:02 Set A/D channel type result=40 03:00:02 Set A/D encoding result=40 03:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:02 Set channel filter=0.000000e+000 result=40 03:00:02 Config A/D Result=40 03:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:02 Get A/D filter: -9.255963e+061 result=40 03:00:02 Get A/D value=-858993460 result=40 03:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:02 Parameters OK 03:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:02 Set A/D data flow result=40 03:00:02 Set A/D channel type result=40 03:00:02 Set A/D encoding result=40 03:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:02 Set channel filter=0.000000e+000 result=40 03:00:02 Config A/D Result=40 03:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:02 Get A/D filter: -9.255963e+061 result=40 03:00:02 Get A/D value=-858993460 result=40 03:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:00:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:00:02 Aux= 03:00:02 Message to Camera, serial 260140 queued 03:00:39 Received message from Master: op=PointingHead serial=260153 03:00:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:00:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:00:40 Point started: ret=0 03:00:40 point_skyscan result=0 03:00:40 Check angles 03:00:40 SkyScan query 03:00:41 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.625<-16575 Statuses=0009 0009 03:00:41 Msec=0 True Az=64.185 Ze=-68.625 Az status=0009 Ze status=0009 03:00:41 Check angles 03:00:41 SkyScan query 03:00:42 SkyScan query done: ret=0 az=82.05<-5470 ze=-90<-18000 Statuses=0009 0009 03:00:42 Msec=750 True Az=82.05 Ze=-90 Az status=0009 Ze status=0009 03:00:42 Check angles 03:00:42 SkyScan query 03:00:42 SkyScan query done: ret=0 az=99.57<-6638 ze=-110.955<-19397 Statuses=0009 0009 03:00:42 Msec=1500 True Az=99.57 Ze=-110.955 Az status=0009 Ze status=0009 03:00:43 Check angles 03:00:43 SkyScan query 03:00:43 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.88<-20792 Statuses=0009 0009 03:00:43 Msec=2250 True Az=117.015 Ze=-131.88 Az status=0009 Ze status=0009 03:00:43 Check angles 03:00:43 SkyScan query 03:00:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 03:00:44 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 03:00:44 Check angles 03:00:44 SkyScan query 03:00:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 03:00:45 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 03:00:45 Message to Master queued w/err=0: serial=260153 error=0 03:00:50 Received message from Master: op=Filter serial=260154 03:00:50 Color wheel filter change from 0 to 0 03:00:50 FLIGetFilterPos err=0 currentPosition=0 03:00:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:00:50 Filter is already there-color wheel unchanged 03:00:50 Received message from Master: op=Shutter serial=260155 03:00:50 Shutter LASER close 03:00:50 Received message from Camera: op=State serial=260157 03:00:50 GetSingleValue result=40 Value=cccccccc 03:00:50 SkyScan query 03:00:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:00:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:51 Parameters OK 03:00:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:51 Set A/D data flow result=40 03:00:51 Set A/D channel type result=40 03:00:51 Set A/D encoding result=40 03:00:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:51 Set channel filter=0.000000e+000 result=40 03:00:51 Config A/D Result=40 03:00:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:51 Get A/D filter: -9.255963e+061 result=40 03:00:51 Get A/D value=-858993460 result=40 03:00:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:51 Parameters OK 03:00:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:51 Set A/D data flow result=40 03:00:51 Set A/D channel type result=40 03:00:51 Set A/D encoding result=40 03:00:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:51 Set channel filter=0.000000e+000 result=40 03:00:51 Config A/D Result=40 03:00:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:51 Get A/D filter: -9.255963e+061 result=40 03:00:51 Get A/D value=-858993460 result=40 03:00:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:00:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:00:51 Aux= 03:00:51 Message to Camera, serial 260157 queued 03:01:27 Received message from Master: op=PointingHead serial=260170 03:01:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:01:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:01:28 Point started: ret=0 03:01:28 point_skyscan result=0 03:01:28 Check angles 03:01:28 SkyScan query 03:01:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 03:01:29 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 03:01:29 Check angles 03:01:29 SkyScan query 03:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:01:30 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:01:30 Message to Master queued w/err=0: serial=260170 error=0 03:01:35 Received message from Master: op=Filter serial=260171 03:01:35 Color wheel filter change from 0 to 0 03:01:35 FLIGetFilterPos err=0 currentPosition=0 03:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:01:35 Filter is already there-color wheel unchanged 03:01:35 Received message from Master: op=Shutter serial=260172 03:01:35 Shutter LASER open 03:01:35 Received message from Camera: op=State serial=260174 03:01:35 GetSingleValue result=40 Value=cccccccc 03:01:35 SkyScan query 03:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:36 Parameters OK 03:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:36 Set A/D data flow result=40 03:01:36 Set A/D channel type result=40 03:01:36 Set A/D encoding result=40 03:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:36 Set channel filter=0.000000e+000 result=40 03:01:36 Config A/D Result=40 03:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:36 Get A/D filter: -9.255963e+061 result=40 03:01:36 Get A/D value=-858993460 result=40 03:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:36 Parameters OK 03:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:36 Set A/D data flow result=40 03:01:36 Set A/D channel type result=40 03:01:36 Set A/D encoding result=40 03:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:36 Set channel filter=0.000000e+000 result=40 03:01:36 Config A/D Result=40 03:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:36 Get A/D filter: -9.255963e+061 result=40 03:01:36 Get A/D value=-858993460 result=40 03:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:01:36 Aux= 03:01:36 Message to Camera, serial 260174 queued 03:01:44 Received message from Master: op=Shutter serial=260184 03:01:44 Shutter LASER close 03:01:45 Received message from Master: op=PointingHead serial=260188 03:01:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:01:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:01:45 Point started: ret=0 03:01:45 point_skyscan result=0 03:01:46 Check angles 03:01:46 SkyScan query 03:01:46 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.77<-21518 Statuses=0009 0009 03:01:46 Msec=0 True Az=136.41 Ze=-142.77 Az status=0009 Ze status=0009 03:01:47 Check angles 03:01:47 SkyScan query 03:01:47 SkyScan query done: ret=0 az=153.84<-10256 ze=-121.83<-20122 Statuses=0009 0009 03:01:47 Msec=750 True Az=153.84 Ze=-121.83 Az status=0009 Ze status=0009 03:01:47 Check angles 03:01:47 SkyScan query 03:01:48 SkyScan query done: ret=0 az=171.735<-11449 ze=-100.365<-18691 Statuses=0009 0009 03:01:48 Msec=1500 True Az=171.735 Ze=-100.365 Az status=0009 Ze status=0009 03:01:48 Check angles 03:01:48 SkyScan query 03:01:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.455<-17297 Statuses=0008 0009 03:01:49 Msec=2250 True Az=176.01 Ze=-79.455 Az status=0008 Ze status=0009 03:01:49 Check angles 03:01:49 SkyScan query 03:01:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.485<-15899 Statuses=0008 0009 03:01:49 Msec=3000 True Az=176.01 Ze=-58.485 Az status=0008 Ze status=0009 03:01:50 Check angles 03:01:50 SkyScan query 03:01:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 03:01:50 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 03:01:50 Message to Master queued w/err=0: serial=260188 error=0 03:01:55 Received message from Master: op=Filter serial=260189 03:01:55 Color wheel filter change from 0 to 0 03:01:55 FLIGetFilterPos err=0 currentPosition=0 03:01:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:01:55 Filter is already there-color wheel unchanged 03:01:55 Received message from Master: op=Shutter serial=260190 03:01:55 Shutter LASER close 03:01:56 Received message from Camera: op=State serial=260192 03:01:56 GetSingleValue result=40 Value=cccccccc 03:01:56 SkyScan query 03:01:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:56 Parameters OK 03:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:56 Set A/D data flow result=40 03:01:56 Set A/D channel type result=40 03:01:56 Set A/D encoding result=40 03:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:56 Set channel filter=0.000000e+000 result=40 03:01:56 Config A/D Result=40 03:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:56 Get A/D filter: -9.255963e+061 result=40 03:01:56 Get A/D value=-858993460 result=40 03:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:56 Parameters OK 03:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:56 Set A/D data flow result=40 03:01:56 Set A/D channel type result=40 03:01:56 Set A/D encoding result=40 03:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:56 Set channel filter=0.000000e+000 result=40 03:01:56 Config A/D Result=40 03:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:56 Get A/D filter: -9.255963e+061 result=40 03:01:56 Get A/D value=-858993460 result=40 03:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:01:56 Aux= 03:01:56 Message to Camera, serial 260192 queued 03:02:33 Received message from Master: op=PointingHead serial=260205 03:02:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:02:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:02:33 Point started: ret=0 03:02:33 point_skyscan result=0 03:02:34 Check angles 03:02:34 SkyScan query 03:02:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.495<-13433 Statuses=0008 0009 03:02:35 Msec=0 True Az=175.995 Ze=-21.495 Az status=0008 Ze status=0009 03:02:35 Check angles 03:02:35 SkyScan query 03:02:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.555<-12037 Statuses=0008 0009 03:02:36 Msec=750 True Az=175.995 Ze=-0.555 Az status=0008 Ze status=0009 03:02:36 Check angles 03:02:36 SkyScan query 03:02:36 SkyScan query done: ret=0 az=175.995<-11733 ze=20.385<-10641 Statuses=0008 0009 03:02:36 Msec=1500 True Az=175.995 Ze=20.385 Az status=0008 Ze status=0009 03:02:36 Check angles 03:02:36 SkyScan query 03:02:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.58<-9428 Statuses=0008 0009 03:02:37 Msec=2250 True Az=175.995 Ze=38.58 Az status=0008 Ze status=0009 03:02:37 Check angles 03:02:37 SkyScan query 03:02:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 03:02:38 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 03:02:38 Message to Master queued w/err=0: serial=260205 error=0 03:02:43 Received message from Master: op=Filter serial=260206 03:02:43 Color wheel filter change from 0 to 0 03:02:43 FLIGetFilterPos err=0 currentPosition=0 03:02:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:02:43 Filter is already there-color wheel unchanged 03:02:43 Received message from Master: op=Shutter serial=260207 03:02:43 Shutter LASER close 03:02:43 Received message from Camera: op=State serial=260209 03:02:43 GetSingleValue result=40 Value=cccccccc 03:02:43 SkyScan query 03:02:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:02:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:02:44 Parameters OK 03:02:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:02:44 Set A/D data flow result=40 03:02:44 Set A/D channel type result=40 03:02:44 Set A/D encoding result=40 03:02:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:02:44 Set channel filter=0.000000e+000 result=40 03:02:44 Config A/D Result=40 03:02:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:02:44 Get A/D filter: -9.255963e+061 result=40 03:02:44 Get A/D value=-858993460 result=40 03:02:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:02:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:02:44 Parameters OK 03:02:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:02:44 Set A/D data flow result=40 03:02:44 Set A/D channel type result=40 03:02:44 Set A/D encoding result=40 03:02:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:02:44 Set channel filter=0.000000e+000 result=40 03:02:44 Config A/D Result=40 03:02:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:02:44 Get A/D filter: -9.255963e+061 result=40 03:02:44 Get A/D value=-858993460 result=40 03:02:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:02:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:02:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:02:44 Aux= 03:02:44 Message to Camera, serial 260209 queued 03:03:20 Received message from Master: op=PointingHead serial=260222 03:03:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:03:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:03:21 Point started: ret=0 03:03:21 point_skyscan result=0 03:03:22 Check angles 03:03:22 SkyScan query 03:03:22 SkyScan query done: ret=0 az=153.12<-10208 ze=8.865<-11409 Statuses=0009 0009 03:03:22 Msec=0 True Az=153.12 Ze=8.865 Az status=0009 Ze status=0009 03:03:22 Check angles 03:03:22 SkyScan query 03:03:23 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.51<-12834 Statuses=0009 0009 03:03:23 Msec=750 True Az=135.15 Ze=-12.51 Az status=0009 Ze status=0009 03:03:23 Check angles 03:03:23 SkyScan query 03:03:24 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.495<-14233 Statuses=0009 0009 03:03:24 Msec=1500 True Az=117.81 Ze=-33.495 Az status=0009 Ze status=0009 03:03:24 Check angles 03:03:24 SkyScan query 03:03:24 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 03:03:24 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 03:03:25 Check angles 03:03:25 SkyScan query 03:03:25 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 03:03:25 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 03:03:25 Check angles 03:03:25 SkyScan query 03:03:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:03:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:03:26 Message to Master queued w/err=0: serial=260222 error=0 03:03:31 Received message from Master: op=Filter serial=260223 03:03:31 Color wheel filter change from 0 to 0 03:03:31 FLIGetFilterPos err=0 currentPosition=0 03:03:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:03:31 Filter is already there-color wheel unchanged 03:03:31 Received message from Master: op=Shutter serial=260224 03:03:31 Shutter LASER close 03:03:31 Received message from Camera: op=State serial=260226 03:03:31 GetSingleValue result=40 Value=cccccccc 03:03:31 SkyScan query 03:03:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:03:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:32 Parameters OK 03:03:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:32 Set A/D data flow result=40 03:03:32 Set A/D channel type result=40 03:03:32 Set A/D encoding result=40 03:03:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:32 Set channel filter=0.000000e+000 result=40 03:03:32 Config A/D Result=40 03:03:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:32 Get A/D filter: -9.255963e+061 result=40 03:03:32 Get A/D value=-858993460 result=40 03:03:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:32 Parameters OK 03:03:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:32 Set A/D data flow result=40 03:03:32 Set A/D channel type result=40 03:03:32 Set A/D encoding result=40 03:03:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:32 Set channel filter=0.000000e+000 result=40 03:03:32 Config A/D Result=40 03:03:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:32 Get A/D filter: -9.255963e+061 result=40 03:03:32 Get A/D value=-858993460 result=40 03:03:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:03:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:03:32 Aux= 03:03:32 Message to Camera, serial 260226 queued 03:04:09 Received message from Master: op=PointingHead serial=260239 03:04:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:04:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:04:09 Point started: ret=0 03:04:09 point_skyscan result=0 03:04:10 Check angles 03:04:10 SkyScan query 03:04:10 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.15<-17410 Statuses=0009 0009 03:04:10 Msec=0 True Az=109.02 Ze=-81.15 Az status=0009 Ze status=0009 03:04:10 Check angles 03:04:10 SkyScan query 03:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 03:04:11 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 03:04:11 Check angles 03:04:11 SkyScan query 03:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 03:04:12 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 03:04:12 Check angles 03:04:12 SkyScan query 03:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.045<-21603 Statuses=0008 0009 03:04:12 Msec=2250 True Az=112.995 Ze=-144.045 Az status=0008 Ze status=0009 03:04:13 Check angles 03:04:13 SkyScan query 03:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.955<-22997 Statuses=0008 0009 03:04:13 Msec=3000 True Az=112.995 Ze=-164.955 Az status=0008 Ze status=0009 03:04:13 Check angles 03:04:13 SkyScan query 03:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:04:14 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:04:14 Message to Master queued w/err=0: serial=260239 error=0 03:04:19 Received message from Master: op=Filter serial=260240 03:04:19 Color wheel filter change from 0 to 0 03:04:19 FLIGetFilterPos err=0 currentPosition=0 03:04:19 FLIGetStepsRemaining err=0 RemainingSteps=0 03:04:19 Filter is already there-color wheel unchanged 03:04:19 Received message from Master: op=Shutter serial=260241 03:04:19 Shutter LASER open 03:04:19 Received message from Camera: op=State serial=260243 03:04:19 GetSingleValue result=40 Value=cccccccc 03:04:19 SkyScan query 03:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:04:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:20 Parameters OK 03:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:20 Set A/D data flow result=40 03:04:20 Set A/D channel type result=40 03:04:20 Set A/D encoding result=40 03:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:20 Set channel filter=0.000000e+000 result=40 03:04:20 Config A/D Result=40 03:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:20 Get A/D filter: -9.255963e+061 result=40 03:04:20 Get A/D value=-858993460 result=40 03:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:20 Parameters OK 03:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:20 Set A/D data flow result=40 03:04:20 Set A/D channel type result=40 03:04:20 Set A/D encoding result=40 03:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:20 Set channel filter=0.000000e+000 result=40 03:04:20 Config A/D Result=40 03:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:20 Get A/D filter: -9.255963e+061 result=40 03:04:20 Get A/D value=-858993460 result=40 03:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:04:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:04:20 Aux= 03:04:20 Message to Camera, serial 260243 queued 03:04:27 Received message from Master: op=Shutter serial=260252 03:04:27 Shutter LASER close 03:04:28 Received message from Master: op=PointingHead serial=260256 03:04:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:04:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:04:28 Point started: ret=0 03:04:28 point_skyscan result=0 03:04:29 Check angles 03:04:29 SkyScan query 03:04:30 SkyScan query done: ret=0 az=90.03<-6002 ze=157.335<-1511 Statuses=0009 0009 03:04:30 Msec=0 True Az=90.03 Ze=157.335 Az status=0009 Ze status=0009 03:04:30 Check angles 03:04:30 SkyScan query 03:04:30 SkyScan query done: ret=0 az=72.09<-4806 ze=135.945<-2937 Statuses=0009 0009 03:04:30 Msec=750 True Az=72.09 Ze=135.945 Az status=0009 Ze status=0009 03:04:30 Check angles 03:04:30 SkyScan query 03:04:31 SkyScan query done: ret=0 az=54.36<-3624 ze=114.495<-4367 Statuses=0009 0009 03:04:31 Msec=1500 True Az=54.36 Ze=114.495 Az status=0009 Ze status=0009 03:04:31 Check angles 03:04:31 SkyScan query 03:04:32 SkyScan query done: ret=0 az=40.98<-2732 ze=93.63<-5758 Statuses=0009 0009 03:04:32 Msec=2250 True Az=40.98 Ze=93.63 Az status=0009 Ze status=0009 03:04:32 Check angles 03:04:32 SkyScan query 03:04:33 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 03:04:33 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 03:04:33 Check angles 03:04:33 SkyScan query 03:04:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 03:04:33 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 03:04:33 Check angles 03:04:33 SkyScan query 03:04:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:04:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:04:34 Message to Master queued w/err=0: serial=260256 error=0 03:04:39 Received message from Master: op=Filter serial=260257 03:04:39 Color wheel filter change from 0 to 0 03:04:39 FLIGetFilterPos err=0 currentPosition=0 03:04:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:04:39 Filter is already there-color wheel unchanged 03:04:39 Received message from Master: op=Shutter serial=260258 03:04:39 Shutter LASER close 03:04:39 Received message from Camera: op=State serial=260260 03:04:39 GetSingleValue result=40 Value=cccccccc 03:04:39 SkyScan query 03:04:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:04:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:40 Parameters OK 03:04:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:40 Set A/D data flow result=40 03:04:40 Set A/D channel type result=40 03:04:40 Set A/D encoding result=40 03:04:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:40 Set channel filter=0.000000e+000 result=40 03:04:40 Config A/D Result=40 03:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:40 Get A/D filter: -9.255963e+061 result=40 03:04:40 Get A/D value=-858993460 result=40 03:04:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:40 Parameters OK 03:04:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:40 Set A/D data flow result=40 03:04:40 Set A/D channel type result=40 03:04:40 Set A/D encoding result=40 03:04:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:40 Set channel filter=0.000000e+000 result=40 03:04:40 Config A/D Result=40 03:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:40 Get A/D filter: -9.255963e+061 result=40 03:04:40 Get A/D value=-858993460 result=40 03:04:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:04:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:04:40 Aux= 03:04:40 Message to Camera, serial 260260 queued 03:05:17 Received message from Master: op=PointingHead serial=260273 03:05:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:05:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:05:17 Point started: ret=0 03:05:17 point_skyscan result=0 03:05:18 Check angles 03:05:18 SkyScan query 03:05:19 SkyScan query done: ret=0 az=40.995<-2733 ze=21.705<-10553 Statuses=0008 0009 03:05:19 Msec=0 True Az=40.995 Ze=21.705 Az status=0008 Ze status=0009 03:05:19 Check angles 03:05:19 SkyScan query 03:05:19 SkyScan query done: ret=0 az=40.995<-2733 ze=0.285<-11981 Statuses=0008 0009 03:05:19 Msec=750 True Az=40.995 Ze=0.285 Az status=0008 Ze status=0009 03:05:20 Check angles 03:05:20 SkyScan query 03:05:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.09<-13406 Statuses=0008 0009 03:05:20 Msec=1500 True Az=40.995 Ze=-21.09 Az status=0008 Ze status=0009 03:05:20 Check angles 03:05:20 SkyScan query 03:05:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 03:05:21 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 03:05:21 Check angles 03:05:21 SkyScan query 03:05:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:05:22 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:05:22 Message to Master queued w/err=0: serial=260273 error=0 03:05:27 Received message from Master: op=Filter serial=260274 03:05:27 Color wheel filter change from 0 to 0 03:05:27 FLIGetFilterPos err=0 currentPosition=0 03:05:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:05:27 Filter is already there-color wheel unchanged 03:05:27 Received message from Master: op=Shutter serial=260275 03:05:27 Shutter LASER close 03:05:27 Received message from Camera: op=State serial=260277 03:05:27 GetSingleValue result=40 Value=cccccccc 03:05:27 SkyScan query 03:05:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:05:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:27 Parameters OK 03:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:27 Set A/D data flow result=40 03:05:27 Set A/D channel type result=40 03:05:27 Set A/D encoding result=40 03:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:27 Set channel filter=0.000000e+000 result=40 03:05:27 Config A/D Result=40 03:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:27 Get A/D filter: -9.255963e+061 result=40 03:05:27 Get A/D value=-858993460 result=40 03:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:27 Parameters OK 03:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:27 Set A/D data flow result=40 03:05:27 Set A/D channel type result=40 03:05:27 Set A/D encoding result=40 03:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:27 Set channel filter=0.000000e+000 result=40 03:05:27 Config A/D Result=40 03:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:27 Get A/D filter: -9.255963e+061 result=40 03:05:27 Get A/D value=-858993460 result=40 03:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:05:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:05:27 Aux= 03:05:27 Message to Camera, serial 260277 queued 03:06:04 Received message from Master: op=PointingHead serial=260290 03:06:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:06:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:06:05 Point started: ret=0 03:06:05 point_skyscan result=0 03:06:05 Check angles 03:06:05 SkyScan query 03:06:06 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.145<-16543 Statuses=0009 0009 03:06:06 Msec=0 True Az=64.245 Ze=-68.145 Az status=0009 Ze status=0009 03:06:06 Check angles 03:06:06 SkyScan query [UTC 2018-12-19 03:06:07] 03:06:07 SkyScan query done: ret=0 az=81.48<-5432 ze=-89.175<-17945 Statuses=0009 0009 03:06:07 Msec=750 True Az=81.48 Ze=-89.175 Az status=0009 Ze status=0009 03:06:07 Check angles 03:06:07 SkyScan query 03:06:07 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.085<-19339 Statuses=0009 0009 03:06:07 Msec=1500 True Az=99.195 Ze=-110.085 Az status=0009 Ze status=0009 03:06:08 Check angles 03:06:08 SkyScan query 03:06:08 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.505<-20767 Statuses=0009 0009 03:06:08 Msec=2250 True Az=116.925 Ze=-131.505 Az status=0009 Ze status=0009 03:06:08 Check angles 03:06:08 SkyScan query 03:06:09 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 03:06:09 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 03:06:09 Check angles 03:06:09 SkyScan query 03:06:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:06:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:06:10 Message to Master queued w/err=0: serial=260290 error=0 03:06:15 Received message from Master: op=Filter serial=260291 03:06:15 Color wheel filter change from 0 to 0 03:06:15 FLIGetFilterPos err=0 currentPosition=0 03:06:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:06:15 Filter is already there-color wheel unchanged 03:06:15 Received message from Master: op=Shutter serial=260292 03:06:15 Shutter LASER close 03:06:15 Received message from Camera: op=State serial=260294 03:06:15 GetSingleValue result=40 Value=cccccccc 03:06:15 SkyScan query 03:06:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:06:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:16 Parameters OK 03:06:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:16 Set A/D data flow result=40 03:06:16 Set A/D channel type result=40 03:06:16 Set A/D encoding result=40 03:06:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:16 Set channel filter=0.000000e+000 result=40 03:06:16 Config A/D Result=40 03:06:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:16 Get A/D filter: -9.255963e+061 result=40 03:06:16 Get A/D value=-858993460 result=40 03:06:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:16 Parameters OK 03:06:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:16 Set A/D data flow result=40 03:06:16 Set A/D channel type result=40 03:06:16 Set A/D encoding result=40 03:06:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:16 Set channel filter=0.000000e+000 result=40 03:06:16 Config A/D Result=40 03:06:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:16 Get A/D filter: -9.255963e+061 result=40 03:06:16 Get A/D value=-858993460 result=40 03:06:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:06:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:06:16 Aux= 03:06:16 Message to Camera, serial 260294 queued 03:06:52 Received message from Master: op=PointingHead serial=260307 03:06:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:06:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:06:53 Point started: ret=0 03:06:53 point_skyscan result=0 03:06:53 Check angles 03:06:53 SkyScan query 03:06:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 03:06:54 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 03:06:54 Check angles 03:06:54 SkyScan query 03:06:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:06:55 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:06:55 Message to Master queued w/err=0: serial=260307 error=0 03:07:00 Received message from Master: op=Filter serial=260308 03:07:00 Color wheel filter change from 0 to 0 03:07:00 FLIGetFilterPos err=0 currentPosition=0 03:07:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:07:00 Filter is already there-color wheel unchanged 03:07:00 Received message from Master: op=Shutter serial=260309 03:07:00 Shutter LASER open 03:07:00 Received message from Camera: op=State serial=260311 03:07:00 GetSingleValue result=40 Value=cccccccc 03:07:00 SkyScan query 03:07:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:07:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:01 Parameters OK 03:07:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:01 Set A/D data flow result=40 03:07:01 Set A/D channel type result=40 03:07:01 Set A/D encoding result=40 03:07:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:01 Set channel filter=0.000000e+000 result=40 03:07:01 Config A/D Result=40 03:07:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:01 Get A/D filter: -9.255963e+061 result=40 03:07:01 Get A/D value=-858993460 result=40 03:07:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:01 Parameters OK 03:07:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:01 Set A/D data flow result=40 03:07:01 Set A/D channel type result=40 03:07:01 Set A/D encoding result=40 03:07:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:01 Set channel filter=0.000000e+000 result=40 03:07:01 Config A/D Result=40 03:07:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:01 Get A/D filter: -9.255963e+061 result=40 03:07:01 Get A/D value=-858993460 result=40 03:07:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:07:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:07:01 Aux= 03:07:01 Message to Camera, serial 260311 queued 03:07:09 Received message from Master: op=Shutter serial=260321 03:07:09 Shutter LASER close 03:07:10 Received message from Master: op=PointingHead serial=260325 03:07:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:07:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:07:10 Point started: ret=0 03:07:10 point_skyscan result=0 03:07:11 Check angles 03:07:11 SkyScan query 03:07:11 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.205<-21547 Statuses=0009 0009 03:07:11 Msec=0 True Az=136.095 Ze=-143.205 Az status=0009 Ze status=0009 03:07:12 Check angles 03:07:12 SkyScan query 03:07:12 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.815<-20121 Statuses=0009 0009 03:07:12 Msec=750 True Az=153.885 Ze=-121.815 Az status=0009 Ze status=0009 03:07:12 Check angles 03:07:12 SkyScan query 03:07:13 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.8<-18720 Statuses=0009 0009 03:07:13 Msec=1500 True Az=171.375 Ze=-100.8 Az status=0009 Ze status=0009 03:07:13 Check angles 03:07:13 SkyScan query 03:07:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.92<-17328 Statuses=0008 0009 03:07:14 Msec=2250 True Az=176.01 Ze=-79.92 Az status=0008 Ze status=0009 03:07:14 Check angles 03:07:14 SkyScan query 03:07:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 03:07:15 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 03:07:15 Check angles 03:07:15 SkyScan query 03:07:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:07:15 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:07:15 Message to Master queued w/err=0: serial=260325 error=0 03:07:20 Received message from Master: op=Filter serial=260326 03:07:20 Color wheel filter change from 0 to 0 03:07:20 FLIGetFilterPos err=0 currentPosition=0 03:07:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:07:20 Filter is already there-color wheel unchanged 03:07:20 Received message from Master: op=Shutter serial=260327 03:07:20 Shutter LASER close 03:07:21 Received message from Camera: op=State serial=260329 03:07:21 GetSingleValue result=40 Value=cccccccc 03:07:21 SkyScan query 03:07:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:07:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:21 Parameters OK 03:07:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:21 Set A/D data flow result=40 03:07:21 Set A/D channel type result=40 03:07:21 Set A/D encoding result=40 03:07:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:21 Set channel filter=0.000000e+000 result=40 03:07:21 Config A/D Result=40 03:07:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:21 Get A/D filter: -9.255963e+061 result=40 03:07:21 Get A/D value=-858993460 result=40 03:07:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:21 Parameters OK 03:07:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:21 Set A/D data flow result=40 03:07:21 Set A/D channel type result=40 03:07:21 Set A/D encoding result=40 03:07:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:21 Set channel filter=0.000000e+000 result=40 03:07:21 Config A/D Result=40 03:07:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:21 Get A/D filter: -9.255963e+061 result=40 03:07:21 Get A/D value=-858993460 result=40 03:07:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:07:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:07:21 Aux= 03:07:21 Message to Camera, serial 260329 queued 03:07:58 Received message from Master: op=PointingHead serial=260342 03:07:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:07:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:07:58 Point started: ret=0 03:07:58 point_skyscan result=0 03:07:59 Check angles 03:07:59 SkyScan query 03:08:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.45<-13430 Statuses=0008 0009 03:08:00 Msec=0 True Az=175.995 Ze=-21.45 Az status=0008 Ze status=0009 03:08:00 Check angles 03:08:00 SkyScan query 03:08:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.105<-12007 Statuses=0008 0009 03:08:01 Msec=750 True Az=175.995 Ze=-0.105 Az status=0008 Ze status=0009 03:08:01 Check angles 03:08:01 SkyScan query 03:08:01 SkyScan query done: ret=0 az=175.995<-11733 ze=20.91<-10606 Statuses=0008 0009 03:08:01 Msec=1500 True Az=175.995 Ze=20.91 Az status=0008 Ze status=0009 03:08:02 Check angles 03:08:02 SkyScan query 03:08:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 03:08:02 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 03:08:02 Check angles 03:08:02 SkyScan query 03:08:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 03:08:03 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 03:08:03 Message to Master queued w/err=0: serial=260342 error=0 03:08:08 Received message from Master: op=Filter serial=260343 03:08:08 Color wheel filter change from 0 to 0 03:08:08 FLIGetFilterPos err=0 currentPosition=0 03:08:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:08:08 Filter is already there-color wheel unchanged 03:08:08 Received message from Master: op=Shutter serial=260344 03:08:08 Shutter LASER close 03:08:08 Received message from Camera: op=State serial=260346 03:08:08 GetSingleValue result=40 Value=cccccccc 03:08:08 SkyScan query 03:08:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:08:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:09 Parameters OK 03:08:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:09 Set A/D data flow result=40 03:08:09 Set A/D channel type result=40 03:08:09 Set A/D encoding result=40 03:08:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:09 Set channel filter=0.000000e+000 result=40 03:08:09 Config A/D Result=40 03:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:09 Get A/D filter: -9.255963e+061 result=40 03:08:09 Get A/D value=-858993460 result=40 03:08:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:09 Parameters OK 03:08:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:09 Set A/D data flow result=40 03:08:09 Set A/D channel type result=40 03:08:09 Set A/D encoding result=40 03:08:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:09 Set channel filter=0.000000e+000 result=40 03:08:09 Config A/D Result=40 03:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:09 Get A/D filter: -9.255963e+061 result=40 03:08:09 Get A/D value=-858993460 result=40 03:08:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:08:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:08:09 Aux= 03:08:09 Message to Camera, serial 260346 queued 03:08:45 Received message from Master: op=PointingHead serial=260359 03:08:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:08:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:08:46 Point started: ret=0 03:08:46 point_skyscan result=0 03:08:47 Check angles 03:08:47 SkyScan query 03:08:47 SkyScan query done: ret=0 az=152.685<-10179 ze=8.205<-11453 Statuses=0009 0009 03:08:47 Msec=0 True Az=152.685 Ze=8.205 Az status=0009 Ze status=0009 03:08:47 Check angles 03:08:47 SkyScan query 03:08:48 SkyScan query done: ret=0 az=134.745<-8983 ze=-13.155<-12877 Statuses=0009 0009 03:08:48 Msec=750 True Az=134.745 Ze=-13.155 Az status=0009 Ze status=0009 03:08:48 Check angles 03:08:48 SkyScan query 03:08:49 SkyScan query done: ret=0 az=117.345<-7823 ze=-34.17<-14278 Statuses=0009 0009 03:08:49 Msec=1500 True Az=117.345 Ze=-34.17 Az status=0009 Ze status=0009 03:08:49 Check angles 03:08:49 SkyScan query 03:08:49 SkyScan query done: ret=0 az=99.9<-6660 ze=-51.57<-15438 Statuses=0009 0009 03:08:49 Msec=2250 True Az=99.9 Ze=-51.57 Az status=0009 Ze status=0009 03:08:50 Check angles 03:08:50 SkyScan query 03:08:50 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 03:08:50 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 03:08:50 Check angles 03:08:50 SkyScan query 03:08:51 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 03:08:51 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 03:08:51 Message to Master queued w/err=0: serial=260359 error=0 03:08:56 Received message from Master: op=Filter serial=260360 03:08:56 Color wheel filter change from 0 to 0 03:08:56 FLIGetFilterPos err=0 currentPosition=0 03:08:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:08:56 Filter is already there-color wheel unchanged 03:08:56 Received message from Master: op=Shutter serial=260361 03:08:56 Shutter LASER close 03:08:56 Received message from Camera: op=State serial=260363 03:08:56 GetSingleValue result=40 Value=cccccccc 03:08:56 SkyScan query 03:08:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:08:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:57 Parameters OK 03:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:57 Set A/D data flow result=40 03:08:57 Set A/D channel type result=40 03:08:57 Set A/D encoding result=40 03:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:57 Set channel filter=0.000000e+000 result=40 03:08:57 Config A/D Result=40 03:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:57 Get A/D filter: -9.255963e+061 result=40 03:08:57 Get A/D value=-858993460 result=40 03:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:57 Parameters OK 03:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:57 Set A/D data flow result=40 03:08:57 Set A/D channel type result=40 03:08:57 Set A/D encoding result=40 03:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:57 Set channel filter=0.000000e+000 result=40 03:08:57 Config A/D Result=40 03:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:57 Get A/D filter: -9.255963e+061 result=40 03:08:57 Get A/D value=-858993460 result=40 03:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:08:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:08:57 Aux= 03:08:57 Message to Camera, serial 260363 queued 03:09:34 Received message from Master: op=PointingHead serial=260376 03:09:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:09:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:09:34 Point started: ret=0 03:09:34 point_skyscan result=0 03:09:35 Check angles 03:09:35 SkyScan query 03:09:35 SkyScan query done: ret=0 az=108.765<-7251 ze=-81.03<-17402 Statuses=0009 0009 03:09:35 Msec=0 True Az=108.765 Ze=-81.03 Az status=0009 Ze status=0009 03:09:35 Check angles 03:09:35 SkyScan query 03:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.135<-18809 Statuses=0008 0009 03:09:36 Msec=750 True Az=112.995 Ze=-102.135 Az status=0008 Ze status=0009 03:09:36 Check angles 03:09:36 SkyScan query 03:09:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 03:09:37 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 03:09:37 Check angles 03:09:37 SkyScan query 03:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 03:09:38 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 03:09:38 Check angles 03:09:38 SkyScan query 03:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.88<-22992 Statuses=0008 0009 03:09:38 Msec=3000 True Az=112.995 Ze=-164.88 Az status=0008 Ze status=0009 03:09:38 Check angles 03:09:38 SkyScan query 03:09:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:09:39 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:09:39 Message to Master queued w/err=0: serial=260376 error=0 03:09:44 Received message from Master: op=Filter serial=260377 03:09:44 Color wheel filter change from 0 to 0 03:09:44 FLIGetFilterPos err=0 currentPosition=0 03:09:44 FLIGetStepsRemaining err=0 RemainingSteps=0 03:09:44 Filter is already there-color wheel unchanged 03:09:44 Received message from Master: op=Shutter serial=260378 03:09:44 Shutter LASER open 03:09:44 Received message from Camera: op=State serial=260380 03:09:44 GetSingleValue result=40 Value=cccccccc 03:09:44 SkyScan query 03:09:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:09:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:45 Parameters OK 03:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:45 Set A/D data flow result=40 03:09:45 Set A/D channel type result=40 03:09:45 Set A/D encoding result=40 03:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:45 Set channel filter=0.000000e+000 result=40 03:09:45 Config A/D Result=40 03:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:45 Get A/D filter: -9.255963e+061 result=40 03:09:45 Get A/D value=-858993460 result=40 03:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:45 Parameters OK 03:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:45 Set A/D data flow result=40 03:09:45 Set A/D channel type result=40 03:09:45 Set A/D encoding result=40 03:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:45 Set channel filter=0.000000e+000 result=40 03:09:45 Config A/D Result=40 03:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:45 Get A/D filter: -9.255963e+061 result=40 03:09:45 Get A/D value=-858993460 result=40 03:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:09:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:09:45 Aux= 03:09:45 Message to Camera, serial 260380 queued 03:09:53 Received message from Master: op=Shutter serial=260390 03:09:53 Shutter LASER close 03:09:54 Received message from Master: op=PointingHead serial=260394 03:09:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:09:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:09:54 Point started: ret=0 03:09:54 point_skyscan result=0 03:09:55 Check angles 03:09:55 SkyScan query 03:09:55 SkyScan query done: ret=0 az=90.09<-6006 ze=157.425<-1505 Statuses=0009 0009 03:09:55 Msec=0 True Az=90.09 Ze=157.425 Az status=0009 Ze status=0009 03:09:56 Check angles 03:09:56 SkyScan query 03:09:56 SkyScan query done: ret=0 az=72.585<-4839 ze=136.44<-2904 Statuses=0009 0009 03:09:56 Msec=750 True Az=72.585 Ze=136.44 Az status=0009 Ze status=0009 03:09:56 Check angles 03:09:56 SkyScan query 03:09:57 SkyScan query done: ret=0 az=55.185<-3679 ze=115.515<-4299 Statuses=0009 0009 03:09:57 Msec=1500 True Az=55.185 Ze=115.515 Az status=0009 Ze status=0009 03:09:57 Check angles 03:09:57 SkyScan query 03:09:58 SkyScan query done: ret=0 az=41.01<-2734 ze=94.515<-5699 Statuses=0009 0009 03:09:58 Msec=2250 True Az=41.01 Ze=94.515 Az status=0009 Ze status=0009 03:09:58 Check angles 03:09:58 SkyScan query 03:09:58 SkyScan query done: ret=0 az=40.995<-2733 ze=73.125<-7125 Statuses=0008 0009 03:09:58 Msec=3000 True Az=40.995 Ze=73.125 Az status=0008 Ze status=0009 03:09:59 Check angles 03:09:59 SkyScan query 03:09:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 03:09:59 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 03:09:59 Check angles 03:09:59 SkyScan query 03:10:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:10:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:10:00 Message to Master queued w/err=0: serial=260394 error=0 03:10:05 Received message from Master: op=Filter serial=260395 03:10:05 Color wheel filter change from 0 to 0 03:10:05 FLIGetFilterPos err=0 currentPosition=0 03:10:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:10:05 Filter is already there-color wheel unchanged 03:10:05 Received message from Master: op=Shutter serial=260396 03:10:05 Shutter LASER close 03:10:05 Received message from Camera: op=State serial=260398 03:10:05 GetSingleValue result=40 Value=cccccccc 03:10:05 SkyScan query 03:10:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:10:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:06 Parameters OK 03:10:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:06 Set A/D data flow result=40 03:10:06 Set A/D channel type result=40 03:10:06 Set A/D encoding result=40 03:10:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:06 Set channel filter=0.000000e+000 result=40 03:10:06 Config A/D Result=40 03:10:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:06 Get A/D filter: -9.255963e+061 result=40 03:10:06 Get A/D value=-858993460 result=40 03:10:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:06 Parameters OK 03:10:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:06 Set A/D data flow result=40 03:10:06 Set A/D channel type result=40 03:10:06 Set A/D encoding result=40 03:10:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:06 Set channel filter=0.000000e+000 result=40 03:10:06 Config A/D Result=40 03:10:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:06 Get A/D filter: -9.255963e+061 result=40 03:10:06 Get A/D value=-858993460 result=40 03:10:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:10:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:10:06 Aux= 03:10:06 Message to Camera, serial 260398 queued 03:10:43 Received message from Master: op=PointingHead serial=260411 03:10:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:10:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:10:43 Point started: ret=0 03:10:43 point_skyscan result=0 03:10:44 Check angles 03:10:44 SkyScan query 03:10:45 SkyScan query done: ret=0 az=40.995<-2733 ze=21.69<-10554 Statuses=0008 0009 03:10:45 Msec=0 True Az=40.995 Ze=21.69 Az status=0008 Ze status=0009 03:10:45 Check angles 03:10:45 SkyScan query 03:10:45 SkyScan query done: ret=0 az=40.995<-2733 ze=0.72<-11952 Statuses=0008 0009 03:10:45 Msec=750 True Az=40.995 Ze=0.72 Az status=0008 Ze status=0009 03:10:45 Check angles 03:10:45 SkyScan query 03:10:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.715<-13381 Statuses=0008 0009 03:10:46 Msec=1500 True Az=40.995 Ze=-20.715 Az status=0008 Ze status=0009 03:10:46 Check angles 03:10:46 SkyScan query 03:10:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:10:47 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:10:47 Check angles 03:10:47 SkyScan query 03:10:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:10:48 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:10:48 Message to Master queued w/err=0: serial=260411 error=0 03:10:53 Received message from Master: op=Filter serial=260412 03:10:53 Color wheel filter change from 0 to 0 03:10:53 FLIGetFilterPos err=0 currentPosition=0 03:10:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:10:53 Filter is already there-color wheel unchanged 03:10:53 Received message from Master: op=Shutter serial=260413 03:10:53 Shutter LASER close 03:10:53 Received message from Camera: op=State serial=260415 03:10:53 GetSingleValue result=40 Value=cccccccc 03:10:53 SkyScan query 03:10:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:10:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:53 Parameters OK 03:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:53 Set A/D data flow result=40 03:10:53 Set A/D channel type result=40 03:10:53 Set A/D encoding result=40 03:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:53 Set channel filter=0.000000e+000 result=40 03:10:53 Config A/D Result=40 03:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:53 Get A/D filter: -9.255963e+061 result=40 03:10:53 Get A/D value=-858993460 result=40 03:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:53 Parameters OK 03:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:53 Set A/D data flow result=40 03:10:53 Set A/D channel type result=40 03:10:53 Set A/D encoding result=40 03:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:53 Set channel filter=0.000000e+000 result=40 03:10:53 Config A/D Result=40 03:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:53 Get A/D filter: -9.255963e+061 result=40 03:10:53 Get A/D value=-858993460 result=40 03:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:10:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:10:53 Aux= 03:10:53 Message to Camera, serial 260415 queued 03:11:30 Received message from Master: op=PointingHead serial=260428 03:11:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:11:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:11:31 Point started: ret=0 03:11:31 point_skyscan result=0 03:11:31 Check angles 03:11:31 SkyScan query 03:11:32 SkyScan query done: ret=0 az=64.26<-4284 ze=-68.49<-16566 Statuses=0009 0009 03:11:32 Msec=0 True Az=64.26 Ze=-68.49 Az status=0009 Ze status=0009 03:11:32 Check angles 03:11:32 SkyScan query 03:11:33 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.88<-17992 Statuses=0009 0009 03:11:33 Msec=750 True Az=81.9 Ze=-89.88 Az status=0009 Ze status=0009 03:11:33 Check angles 03:11:33 SkyScan query 03:11:33 SkyScan query done: ret=0 az=99.9<-6660 ze=-111.255<-19417 Statuses=0009 0009 03:11:33 Msec=1500 True Az=99.9 Ze=-111.255 Az status=0009 Ze status=0009 03:11:34 Check angles 03:11:34 SkyScan query 03:11:34 SkyScan query done: ret=0 az=117.315<-7821 ze=-132.21<-20814 Statuses=0009 0009 03:11:34 Msec=2250 True Az=117.315 Ze=-132.21 Az status=0009 Ze status=0009 03:11:34 Check angles 03:11:34 SkyScan query 03:11:35 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 03:11:35 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 03:11:35 Check angles 03:11:35 SkyScan query 03:11:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:11:36 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:11:36 Message to Master queued w/err=0: serial=260428 error=0 03:11:41 Received message from Master: op=Filter serial=260429 03:11:41 Color wheel filter change from 0 to 0 03:11:41 FLIGetFilterPos err=0 currentPosition=0 03:11:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:11:41 Filter is already there-color wheel unchanged 03:11:41 Received message from Master: op=Shutter serial=260430 03:11:41 Shutter LASER close 03:11:41 Received message from Camera: op=State serial=260432 03:11:41 GetSingleValue result=40 Value=cccccccc 03:11:41 SkyScan query 03:11:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:11:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:42 Parameters OK 03:11:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:42 Set A/D data flow result=40 03:11:42 Set A/D channel type result=40 03:11:42 Set A/D encoding result=40 03:11:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:42 Set channel filter=0.000000e+000 result=40 03:11:42 Config A/D Result=40 03:11:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:42 Get A/D filter: -9.255963e+061 result=40 03:11:42 Get A/D value=-858993460 result=40 03:11:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:42 Parameters OK 03:11:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:42 Set A/D data flow result=40 03:11:42 Set A/D channel type result=40 03:11:42 Set A/D encoding result=40 03:11:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:42 Set channel filter=0.000000e+000 result=40 03:11:42 Config A/D Result=40 03:11:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:42 Get A/D filter: -9.255963e+061 result=40 03:11:42 Get A/D value=-858993460 result=40 03:11:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:11:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:11:42 Aux= 03:11:42 Message to Camera, serial 260432 queued 03:12:18 Received message from Master: op=PointingHead serial=260445 03:12:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:12:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:12:19 Point started: ret=0 03:12:19 point_skyscan result=0 03:12:19 Check angles 03:12:19 SkyScan query 03:12:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 03:12:20 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 03:12:20 Check angles 03:12:20 SkyScan query 03:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:12:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:12:21 Message to Master queued w/err=0: serial=260445 error=0 03:12:26 Received message from Master: op=Filter serial=260446 03:12:26 Color wheel filter change from 0 to 0 03:12:26 FLIGetFilterPos err=0 currentPosition=0 03:12:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:26 Filter is already there-color wheel unchanged 03:12:26 Received message from Master: op=Shutter serial=260447 03:12:26 Shutter LASER open 03:12:26 Received message from Camera: op=State serial=260449 03:12:26 GetSingleValue result=40 Value=cccccccc 03:12:26 SkyScan query 03:12:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:12:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:27 Parameters OK 03:12:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:27 Set A/D data flow result=40 03:12:27 Set A/D channel type result=40 03:12:27 Set A/D encoding result=40 03:12:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:27 Set channel filter=0.000000e+000 result=40 03:12:27 Config A/D Result=40 03:12:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:27 Get A/D filter: -9.255963e+061 result=40 03:12:27 Get A/D value=-858993460 result=40 03:12:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:27 Parameters OK 03:12:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:27 Set A/D data flow result=40 03:12:27 Set A/D channel type result=40 03:12:27 Set A/D encoding result=40 03:12:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:27 Set channel filter=0.000000e+000 result=40 03:12:27 Config A/D Result=40 03:12:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:27 Get A/D filter: -9.255963e+061 result=40 03:12:27 Get A/D value=-858993460 result=40 03:12:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:27 Aux= 03:12:27 Message to Camera, serial 260449 queued 03:12:35 Received message from Master: op=Shutter serial=260459 03:12:35 Shutter LASER close 03:12:36 Received message from Master: op=PointingHead serial=260463 03:12:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:12:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:12:36 Point started: ret=0 03:12:36 point_skyscan result=0 03:12:37 Check angles 03:12:37 SkyScan query 03:12:37 SkyScan query done: ret=0 az=136.44<-9096 ze=-142.665<-21511 Statuses=0009 0009 03:12:37 Msec=0 True Az=136.44 Ze=-142.665 Az status=0009 Ze status=0009 03:12:38 Check angles 03:12:38 SkyScan query 03:12:38 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.755<-20117 Statuses=0009 0009 03:12:38 Msec=750 True Az=153.96 Ze=-121.755 Az status=0009 Ze status=0009 03:12:38 Check angles 03:12:38 SkyScan query 03:12:39 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.695<-18713 Statuses=0009 0009 03:12:39 Msec=1500 True Az=171.45 Ze=-100.695 Az status=0009 Ze status=0009 03:12:39 Check angles 03:12:39 SkyScan query 03:12:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 03:12:40 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 03:12:40 Check angles 03:12:40 SkyScan query 03:12:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.83<-15922 Statuses=0008 0009 03:12:40 Msec=3000 True Az=176.01 Ze=-58.83 Az status=0008 Ze status=0009 03:12:41 Check angles 03:12:41 SkyScan query 03:12:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:12:41 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:12:41 Message to Master queued w/err=0: serial=260463 error=0 03:12:46 Received message from Master: op=Filter serial=260464 03:12:46 Color wheel filter change from 0 to 0 03:12:46 FLIGetFilterPos err=0 currentPosition=0 03:12:46 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:46 Filter is already there-color wheel unchanged 03:12:46 Received message from Master: op=Shutter serial=260465 03:12:46 Shutter LASER close 03:12:46 Received message from Camera: op=State serial=260467 03:12:46 GetSingleValue result=40 Value=cccccccc 03:12:46 SkyScan query 03:12:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:12:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:47 Parameters OK 03:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:47 Set A/D data flow result=40 03:12:47 Set A/D channel type result=40 03:12:47 Set A/D encoding result=40 03:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:47 Set channel filter=0.000000e+000 result=40 03:12:47 Config A/D Result=40 03:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:47 Get A/D filter: -9.255963e+061 result=40 03:12:47 Get A/D value=-858993460 result=40 03:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:47 Parameters OK 03:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:47 Set A/D data flow result=40 03:12:47 Set A/D channel type result=40 03:12:47 Set A/D encoding result=40 03:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:47 Set channel filter=0.000000e+000 result=40 03:12:47 Config A/D Result=40 03:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:47 Get A/D filter: -9.255963e+061 result=40 03:12:47 Get A/D value=-858993460 result=40 03:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:47 Aux= 03:12:47 Message to Camera, serial 260467 queued 03:13:24 Received message from Master: op=PointingHead serial=260480 03:13:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:13:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:13:24 Point started: ret=0 03:13:24 point_skyscan result=0 03:13:25 Check angles 03:13:25 SkyScan query 03:13:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.42<-13428 Statuses=0008 0009 03:13:26 Msec=0 True Az=175.995 Ze=-21.42 Az status=0008 Ze status=0009 03:13:26 Check angles 03:13:26 SkyScan query 03:13:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.09<-12006 Statuses=0008 0009 03:13:26 Msec=750 True Az=175.995 Ze=-0.09 Az status=0008 Ze status=0009 03:13:27 Check angles 03:13:27 SkyScan query 03:13:27 SkyScan query done: ret=0 az=175.995<-11733 ze=21.36<-10576 Statuses=0008 0009 03:13:27 Msec=1500 True Az=175.995 Ze=21.36 Az status=0008 Ze status=0009 03:13:27 Check angles 03:13:27 SkyScan query 03:13:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.58<-9428 Statuses=0008 0009 03:13:28 Msec=2250 True Az=175.995 Ze=38.58 Az status=0008 Ze status=0009 03:13:28 Check angles 03:13:28 SkyScan query 03:13:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 03:13:29 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 03:13:29 Message to Master queued w/err=0: serial=260480 error=0 03:13:34 Received message from Master: op=Filter serial=260481 03:13:34 Color wheel filter change from 0 to 0 03:13:34 FLIGetFilterPos err=0 currentPosition=0 03:13:34 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:34 Filter is already there-color wheel unchanged 03:13:34 Received message from Master: op=Shutter serial=260482 03:13:34 Shutter LASER close 03:13:34 Received message from Camera: op=State serial=260484 03:13:34 GetSingleValue result=40 Value=cccccccc 03:13:34 SkyScan query 03:13:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:13:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:35 Parameters OK 03:13:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:35 Set A/D data flow result=40 03:13:35 Set A/D channel type result=40 03:13:35 Set A/D encoding result=40 03:13:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:35 Set channel filter=0.000000e+000 result=40 03:13:35 Config A/D Result=40 03:13:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:35 Get A/D filter: -9.255963e+061 result=40 03:13:35 Get A/D value=-858993460 result=40 03:13:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:35 Parameters OK 03:13:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:35 Set A/D data flow result=40 03:13:35 Set A/D channel type result=40 03:13:35 Set A/D encoding result=40 03:13:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:35 Set channel filter=0.000000e+000 result=40 03:13:35 Config A/D Result=40 03:13:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:35 Get A/D filter: -9.255963e+061 result=40 03:13:35 Get A/D value=-858993460 result=40 03:13:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:35 Aux= 03:13:35 Message to Camera, serial 260484 queued 03:14:11 Received message from Master: op=PointingHead serial=260497 03:14:11 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:14:11 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:14:12 Point started: ret=0 03:14:12 point_skyscan result=0 03:14:12 Check angles 03:14:12 SkyScan query 03:14:13 SkyScan query done: ret=0 az=153.165<-10211 ze=8.7<-11420 Statuses=0009 0009 03:14:13 Msec=0 True Az=153.165 Ze=8.7 Az status=0009 Ze status=0009 03:14:13 Check angles 03:14:13 SkyScan query 03:14:14 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.18<-12812 Statuses=0009 0009 03:14:14 Msec=750 True Az=135.675 Ze=-12.18 Az status=0009 Ze status=0009 03:14:14 Check angles 03:14:14 SkyScan query 03:14:15 SkyScan query done: ret=0 az=118.185<-7879 ze=-33.105<-14207 Statuses=0009 0009 03:14:15 Msec=1500 True Az=118.185 Ze=-33.105 Az status=0009 Ze status=0009 03:14:15 Check angles 03:14:15 SkyScan query 03:14:15 SkyScan query done: ret=0 az=100.77<-6718 ze=-51.525<-15435 Statuses=0009 0009 03:14:15 Msec=2250 True Az=100.77 Ze=-51.525 Az status=0009 Ze status=0009 03:14:15 Check angles 03:14:15 SkyScan query 03:14:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 03:14:16 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 03:14:16 Check angles 03:14:16 SkyScan query 03:14:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:14:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:14:17 Message to Master queued w/err=0: serial=260497 error=0 03:14:22 Received message from Master: op=Filter serial=260498 03:14:22 Color wheel filter change from 0 to 0 03:14:22 FLIGetFilterPos err=0 currentPosition=0 03:14:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:22 Filter is already there-color wheel unchanged 03:14:22 Received message from Master: op=Shutter serial=260499 03:14:22 Shutter LASER close 03:14:22 Received message from Camera: op=State serial=260501 03:14:22 GetSingleValue result=40 Value=cccccccc 03:14:22 SkyScan query 03:14:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:14:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:23 Parameters OK 03:14:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:23 Set A/D data flow result=40 03:14:23 Set A/D channel type result=40 03:14:23 Set A/D encoding result=40 03:14:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:23 Set channel filter=0.000000e+000 result=40 03:14:23 Config A/D Result=40 03:14:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:23 Get A/D filter: -9.255963e+061 result=40 03:14:23 Get A/D value=-858993460 result=40 03:14:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:23 Parameters OK 03:14:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:23 Set A/D data flow result=40 03:14:23 Set A/D channel type result=40 03:14:23 Set A/D encoding result=40 03:14:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:23 Set channel filter=0.000000e+000 result=40 03:14:23 Config A/D Result=40 03:14:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:23 Get A/D filter: -9.255963e+061 result=40 03:14:23 Get A/D value=-858993460 result=40 03:14:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:23 Aux= 03:14:23 Message to Camera, serial 260501 queued 03:14:59 Received message from Master: op=PointingHead serial=260514 03:14:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:14:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:15:00 Point started: ret=0 03:15:00 point_skyscan result=0 03:15:01 Check angles 03:15:01 SkyScan query 03:15:01 SkyScan query done: ret=0 az=108.75<-7250 ze=-81.015<-17401 Statuses=0009 0009 03:15:01 Msec=0 True Az=108.75 Ze=-81.015 Az status=0009 Ze status=0009 03:15:01 Check angles 03:15:01 SkyScan query 03:15:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 03:15:02 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 03:15:02 Check angles 03:15:02 SkyScan query 03:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.925<-20195 Statuses=0008 0009 03:15:03 Msec=1500 True Az=112.995 Ze=-122.925 Az status=0008 Ze status=0009 03:15:03 Check angles 03:15:03 SkyScan query 03:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 03:15:03 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 03:15:04 Check angles 03:15:04 SkyScan query 03:15:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 03:15:04 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 03:15:04 Check angles 03:15:04 SkyScan query 03:15:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:15:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:15:05 Message to Master queued w/err=0: serial=260514 error=0 03:15:10 Received message from Master: op=Filter serial=260515 03:15:10 Color wheel filter change from 0 to 0 03:15:10 FLIGetFilterPos err=0 currentPosition=0 03:15:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:10 Filter is already there-color wheel unchanged 03:15:10 Received message from Master: op=Shutter serial=260516 03:15:10 Shutter LASER open 03:15:10 Received message from Camera: op=State serial=260518 03:15:10 GetSingleValue result=40 Value=cccccccc 03:15:10 SkyScan query 03:15:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:15:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:11 Parameters OK 03:15:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:11 Set A/D data flow result=40 03:15:11 Set A/D channel type result=40 03:15:11 Set A/D encoding result=40 03:15:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:11 Set channel filter=0.000000e+000 result=40 03:15:11 Config A/D Result=40 03:15:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:11 Get A/D filter: -9.255963e+061 result=40 03:15:11 Get A/D value=-858993460 result=40 03:15:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:11 Parameters OK 03:15:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:11 Set A/D data flow result=40 03:15:11 Set A/D channel type result=40 03:15:11 Set A/D encoding result=40 03:15:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:11 Set channel filter=0.000000e+000 result=40 03:15:11 Config A/D Result=40 03:15:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:11 Get A/D filter: -9.255963e+061 result=40 03:15:11 Get A/D value=-858993460 result=40 03:15:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:11 Aux= 03:15:11 Message to Camera, serial 260518 queued 03:15:19 Received message from Master: op=Shutter serial=260528 03:15:19 Shutter LASER close 03:15:20 Received message from Master: op=PointingHead serial=260532 03:15:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:15:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:15:20 Point started: ret=0 03:15:20 point_skyscan result=0 03:15:21 Check angles 03:15:21 SkyScan query 03:15:21 SkyScan query done: ret=0 az=89.535<-5969 ze=156.735<-1551 Statuses=0009 0009 03:15:21 Msec=0 True Az=89.535 Ze=156.735 Az status=0009 Ze status=0009 03:15:22 Check angles 03:15:22 SkyScan query 03:15:22 SkyScan query done: ret=0 az=72.03<-4802 ze=135.81<-2946 Statuses=0009 0009 03:15:22 Msec=750 True Az=72.03 Ze=135.81 Az status=0009 Ze status=0009 03:15:22 Check angles 03:15:22 SkyScan query 03:15:23 SkyScan query done: ret=0 az=54.555<-3637 ze=114.81<-4346 Statuses=0009 0009 03:15:23 Msec=1500 True Az=54.555 Ze=114.81 Az status=0009 Ze status=0009 03:15:23 Check angles 03:15:23 SkyScan query 03:15:24 SkyScan query done: ret=0 az=40.995<-2733 ze=93.885<-5741 Statuses=0009 0009 03:15:24 Msec=2250 True Az=40.995 Ze=93.885 Az status=0009 Ze status=0009 03:15:24 Check angles 03:15:24 SkyScan query 03:15:24 SkyScan query done: ret=0 az=40.995<-2733 ze=72.885<-7141 Statuses=0008 0009 03:15:24 Msec=3000 True Az=40.995 Ze=72.885 Az status=0008 Ze status=0009 03:15:25 Check angles 03:15:25 SkyScan query 03:15:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 03:15:25 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 03:15:25 Check angles 03:15:25 SkyScan query 03:15:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:15:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:15:26 Message to Master queued w/err=0: serial=260532 error=0 03:15:27 Received message from Master: op=Identify serial=260533 03:15:31 Received message from Master: op=Filter serial=260536 03:15:31 Color wheel filter change from 0 to 0 03:15:31 FLIGetFilterPos err=0 currentPosition=0 03:15:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:31 Filter is already there-color wheel unchanged 03:15:31 Received message from Master: op=Shutter serial=260537 03:15:31 Shutter LASER close 03:15:31 Received message from Camera: op=State serial=260539 03:15:31 GetSingleValue result=40 Value=cccccccc 03:15:31 SkyScan query 03:15:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:15:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:32 Parameters OK [UTC 2018-12-19 03:15:32] 03:15:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:32 Set A/D data flow result=40 03:15:32 Set A/D channel type result=40 03:15:32 Set A/D encoding result=40 03:15:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:32 Set channel filter=0.000000e+000 result=40 03:15:32 Config A/D Result=40 03:15:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:32 Get A/D filter: -9.255963e+061 result=40 03:15:32 Get A/D value=-858993460 result=40 03:15:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:32 Parameters OK 03:15:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:32 Set A/D data flow result=40 03:15:32 Set A/D channel type result=40 03:15:32 Set A/D encoding result=40 03:15:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:32 Set channel filter=0.000000e+000 result=40 03:15:32 Config A/D Result=40 03:15:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:32 Get A/D filter: -9.255963e+061 result=40 03:15:32 Get A/D value=-858993460 result=40 03:15:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:32 Aux= 03:15:32 Message to Camera, serial 260539 queued [UTC 2018-12-19 03:15:52] 03:16:09 Received message from Master: op=PointingHead serial=260552 03:16:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:16:09 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:16:09 Point started: ret=0 03:16:09 point_skyscan result=0 03:16:10 Check angles 03:16:10 SkyScan query 03:16:10 SkyScan query done: ret=0 az=40.98<-2732 ze=21.78<-10548 Statuses=0008 0009 03:16:10 Msec=0 True Az=40.98 Ze=21.78 Az status=0008 Ze status=0009 03:16:11 Check angles 03:16:11 SkyScan query 03:16:11 SkyScan query done: ret=0 az=40.995<-2733 ze=0.36<-11976 Statuses=0008 0009 03:16:11 Msec=750 True Az=40.995 Ze=0.36 Az status=0008 Ze status=0009 03:16:11 Check angles 03:16:11 SkyScan query 03:16:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.595<-13373 Statuses=0008 0009 03:16:12 Msec=1500 True Az=40.995 Ze=-20.595 Az status=0008 Ze status=0009 03:16:12 Check angles 03:16:12 SkyScan query 03:16:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:16:13 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:16:13 Check angles 03:16:13 SkyScan query 03:16:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:16:13 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:16:13 Message to Master queued w/err=0: serial=260552 error=0 03:16:18 Received message from Master: op=Filter serial=260553 03:16:18 Color wheel filter change from 0 to 0 03:16:18 FLIGetFilterPos err=0 currentPosition=0 03:16:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:16:18 Filter is already there-color wheel unchanged 03:16:19 Received message from Master: op=Shutter serial=260554 03:16:19 Shutter LASER close 03:16:19 Received message from Camera: op=State serial=260556 03:16:19 GetSingleValue result=40 Value=cccccccc 03:16:19 SkyScan query 03:16:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:16:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:19 Parameters OK 03:16:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:19 Set A/D data flow result=40 03:16:19 Set A/D channel type result=40 03:16:19 Set A/D encoding result=40 03:16:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:19 Set channel filter=0.000000e+000 result=40 03:16:19 Config A/D Result=40 03:16:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:19 Get A/D filter: -9.255963e+061 result=40 03:16:19 Get A/D value=-858993460 result=40 03:16:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:19 Parameters OK 03:16:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:19 Set A/D data flow result=40 03:16:19 Set A/D channel type result=40 03:16:19 Set A/D encoding result=40 03:16:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:19 Set channel filter=0.000000e+000 result=40 03:16:19 Config A/D Result=40 03:16:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:19 Get A/D filter: -9.255963e+061 result=40 03:16:19 Get A/D value=-858993460 result=40 03:16:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:16:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:16:19 Aux= 03:16:19 Message to Camera, serial 260556 queued 03:16:56 Received message from Master: op=PointingHead serial=260569 03:16:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:16:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:16:56 Point started: ret=0 03:16:56 point_skyscan result=0 03:16:57 Check angles 03:16:57 SkyScan query 03:16:58 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.565<-16571 Statuses=0009 0009 03:16:58 Msec=0 True Az=64.275 Ze=-68.565 Az status=0009 Ze status=0009 03:16:58 Check angles 03:16:58 SkyScan query 03:16:59 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.565<-17971 Statuses=0009 0009 03:16:59 Msec=750 True Az=81.57 Ze=-89.565 Az status=0009 Ze status=0009 03:16:59 Check angles 03:16:59 SkyScan query 03:16:59 SkyScan query done: ret=0 az=99.255<-6617 ze=-110.52<-19368 Statuses=0009 0009 03:16:59 Msec=1500 True Az=99.255 Ze=-110.52 Az status=0009 Ze status=0009 03:16:59 Check angles 03:16:59 SkyScan query 03:17:00 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.43<-20762 Statuses=0009 0009 03:17:00 Msec=2250 True Az=116.61 Ze=-131.43 Az status=0009 Ze status=0009 03:17:00 Check angles 03:17:00 SkyScan query 03:17:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 03:17:01 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 03:17:01 Check angles 03:17:01 SkyScan query 03:17:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:17:02 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:17:02 Message to Master queued w/err=0: serial=260569 error=0 03:17:07 Received message from Master: op=Filter serial=260570 03:17:07 Color wheel filter change from 0 to 0 03:17:07 FLIGetFilterPos err=0 currentPosition=0 03:17:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:07 Filter is already there-color wheel unchanged 03:17:07 Received message from Master: op=Shutter serial=260571 03:17:07 Shutter LASER close 03:17:07 Received message from Camera: op=State serial=260573 03:17:07 GetSingleValue result=40 Value=cccccccc 03:17:07 SkyScan query 03:17:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:17:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:07 Parameters OK 03:17:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:07 Set A/D data flow result=40 03:17:07 Set A/D channel type result=40 03:17:07 Set A/D encoding result=40 03:17:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:07 Set channel filter=0.000000e+000 result=40 03:17:07 Config A/D Result=40 03:17:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:07 Get A/D filter: -9.255963e+061 result=40 03:17:07 Get A/D value=-858993460 result=40 03:17:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:07 Parameters OK 03:17:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:07 Set A/D data flow result=40 03:17:07 Set A/D channel type result=40 03:17:07 Set A/D encoding result=40 03:17:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:07 Set channel filter=0.000000e+000 result=40 03:17:07 Config A/D Result=40 03:17:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:07 Get A/D filter: -9.255963e+061 result=40 03:17:07 Get A/D value=-858993460 result=40 03:17:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:07 Aux= 03:17:07 Message to Camera, serial 260573 queued 03:17:44 Received message from Master: op=PointingHead serial=260586 03:17:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:17:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:17:45 Point started: ret=0 03:17:45 point_skyscan result=0 03:17:45 Check angles 03:17:45 SkyScan query 03:17:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 03:17:46 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 03:17:46 Check angles 03:17:46 SkyScan query 03:17:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:17:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:17:47 Message to Master queued w/err=0: serial=260586 error=0 03:17:52 Received message from Master: op=Filter serial=260587 03:17:52 Color wheel filter change from 0 to 0 03:17:52 FLIGetFilterPos err=0 currentPosition=0 03:17:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:52 Filter is already there-color wheel unchanged 03:17:52 Received message from Master: op=Shutter serial=260588 03:17:52 Shutter LASER open 03:17:52 Received message from Camera: op=State serial=260590 03:17:52 GetSingleValue result=40 Value=cccccccc 03:17:52 SkyScan query 03:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:17:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:53 Parameters OK 03:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:53 Set A/D data flow result=40 03:17:53 Set A/D channel type result=40 03:17:53 Set A/D encoding result=40 03:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:53 Set channel filter=0.000000e+000 result=40 03:17:53 Config A/D Result=40 03:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:53 Get A/D filter: -9.255963e+061 result=40 03:17:53 Get A/D value=-858993460 result=40 03:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:53 Parameters OK 03:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:53 Set A/D data flow result=40 03:17:53 Set A/D channel type result=40 03:17:53 Set A/D encoding result=40 03:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:53 Set channel filter=0.000000e+000 result=40 03:17:53 Config A/D Result=40 03:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:53 Get A/D filter: -9.255963e+061 result=40 03:17:53 Get A/D value=-858993460 result=40 03:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:53 Aux= 03:17:53 Message to Camera, serial 260590 queued 03:18:01 Received message from Master: op=Shutter serial=260600 03:18:01 Shutter LASER close 03:18:02 Received message from Master: op=PointingHead serial=260604 03:18:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:18:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:18:02 Point started: ret=0 03:18:02 point_skyscan result=0 03:18:03 Check angles 03:18:03 SkyScan query 03:18:03 SkyScan query done: ret=0 az=136.575<-9105 ze=-142.71<-21514 Statuses=0009 0009 03:18:03 Msec=0 True Az=136.575 Ze=-142.71 Az status=0009 Ze status=0009 03:18:03 Check angles 03:18:03 SkyScan query 03:18:04 SkyScan query done: ret=0 az=154.11<-10274 ze=-121.77<-20118 Statuses=0009 0009 03:18:04 Msec=750 True Az=154.11 Ze=-121.77 Az status=0009 Ze status=0009 03:18:04 Check angles 03:18:04 SkyScan query 03:18:05 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.725<-18715 Statuses=0009 0009 03:18:05 Msec=1500 True Az=171.525 Ze=-100.725 Az status=0009 Ze status=0009 03:18:05 Check angles 03:18:05 SkyScan query 03:18:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.86<-17324 Statuses=0008 0009 03:18:06 Msec=2250 True Az=176.01 Ze=-79.86 Az status=0008 Ze status=0009 03:18:06 Check angles 03:18:06 SkyScan query 03:18:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.875<-15925 Statuses=0008 0009 03:18:06 Msec=3000 True Az=176.01 Ze=-58.875 Az status=0008 Ze status=0009 03:18:06 Check angles 03:18:06 SkyScan query 03:18:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:18:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:18:07 Message to Master queued w/err=0: serial=260604 error=0 03:18:12 Received message from Master: op=Filter serial=260605 03:18:12 Color wheel filter change from 0 to 0 03:18:12 FLIGetFilterPos err=0 currentPosition=0 03:18:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:18:12 Filter is already there-color wheel unchanged 03:18:12 Received message from Master: op=Shutter serial=260606 03:18:12 Shutter LASER close 03:18:12 Received message from Camera: op=State serial=260608 03:18:12 GetSingleValue result=40 Value=cccccccc 03:18:12 SkyScan query 03:18:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:18:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:13 Parameters OK 03:18:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:13 Set A/D data flow result=40 03:18:13 Set A/D channel type result=40 03:18:13 Set A/D encoding result=40 03:18:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:13 Set channel filter=0.000000e+000 result=40 03:18:13 Config A/D Result=40 03:18:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:13 Get A/D filter: -9.255963e+061 result=40 03:18:13 Get A/D value=-858993460 result=40 03:18:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:13 Parameters OK 03:18:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:13 Set A/D data flow result=40 03:18:13 Set A/D channel type result=40 03:18:13 Set A/D encoding result=40 03:18:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:13 Set channel filter=0.000000e+000 result=40 03:18:13 Config A/D Result=40 03:18:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:13 Get A/D filter: -9.255963e+061 result=40 03:18:13 Get A/D value=-858993460 result=40 03:18:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:18:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:18:13 Aux= 03:18:13 Message to Camera, serial 260608 queued 03:18:50 Received message from Master: op=PointingHead serial=260621 03:18:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:18:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:18:50 Point started: ret=0 03:18:50 point_skyscan result=0 03:18:51 Check angles 03:18:51 SkyScan query 03:18:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.39<-13426 Statuses=0008 0009 03:18:52 Msec=0 True Az=175.995 Ze=-21.39 Az status=0008 Ze status=0009 03:18:52 Check angles 03:18:52 SkyScan query 03:18:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.465<-12031 Statuses=0008 0009 03:18:52 Msec=750 True Az=175.995 Ze=-0.465 Az status=0008 Ze status=0009 03:18:53 Check angles 03:18:53 SkyScan query 03:18:53 SkyScan query done: ret=0 az=175.995<-11733 ze=20.97<-10602 Statuses=0008 0009 03:18:53 Msec=1500 True Az=175.995 Ze=20.97 Az status=0008 Ze status=0009 03:18:53 Check angles 03:18:53 SkyScan query 03:18:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 03:18:54 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 03:18:54 Check angles 03:18:54 SkyScan query 03:18:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.55<-9430 Statuses=0008 0008 03:18:55 Msec=3000 True Az=175.995 Ze=38.55 Az status=0008 Ze status=0008 03:18:55 Message to Master queued w/err=0: serial=260621 error=0 03:19:00 Received message from Master: op=Filter serial=260622 03:19:00 Color wheel filter change from 0 to 0 03:19:00 FLIGetFilterPos err=0 currentPosition=0 03:19:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:00 Filter is already there-color wheel unchanged 03:19:00 Received message from Master: op=Shutter serial=260623 03:19:00 Shutter LASER close 03:19:00 Received message from Camera: op=State serial=260625 03:19:00 GetSingleValue result=40 Value=cccccccc 03:19:00 SkyScan query 03:19:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:19:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:00 Parameters OK 03:19:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:00 Set A/D data flow result=40 03:19:00 Set A/D channel type result=40 03:19:00 Set A/D encoding result=40 03:19:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:00 Set channel filter=0.000000e+000 result=40 03:19:00 Config A/D Result=40 03:19:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:00 Get A/D filter: -9.255963e+061 result=40 03:19:00 Get A/D value=-858993460 result=40 03:19:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:00 Parameters OK 03:19:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:00 Set A/D data flow result=40 03:19:00 Set A/D channel type result=40 03:19:00 Set A/D encoding result=40 03:19:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:00 Set channel filter=0.000000e+000 result=40 03:19:00 Config A/D Result=40 03:19:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:00 Get A/D filter: -9.255963e+061 result=40 03:19:00 Get A/D value=-858993460 result=40 03:19:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:00 Aux= 03:19:00 Message to Camera, serial 260625 queued 03:19:37 Received message from Master: op=PointingHead serial=260638 03:19:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:19:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:19:38 Point started: ret=0 03:19:38 point_skyscan result=0 03:19:38 Check angles 03:19:38 SkyScan query 03:19:39 SkyScan query done: ret=0 az=152.97<-10198 ze=8.7<-11420 Statuses=0009 0009 03:19:39 Msec=0 True Az=152.97 Ze=8.7 Az status=0009 Ze status=0009 03:19:39 Check angles 03:19:39 SkyScan query 03:19:40 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.63<-12842 Statuses=0009 0009 03:19:40 Msec=750 True Az=135.135 Ze=-12.63 Az status=0009 Ze status=0009 03:19:40 Check angles 03:19:40 SkyScan query 03:19:41 SkyScan query done: ret=0 az=117.645<-7843 ze=-33.66<-14244 Statuses=0009 0009 03:19:41 Msec=1500 True Az=117.645 Ze=-33.66 Az status=0009 Ze status=0009 03:19:41 Check angles 03:19:41 SkyScan query 03:19:41 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.57<-15438 Statuses=0009 0009 03:19:41 Msec=2250 True Az=100.26 Ze=-51.57 Az status=0009 Ze status=0009 03:19:41 Check angles 03:19:41 SkyScan query 03:19:42 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:19:42 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:19:42 Check angles 03:19:42 SkyScan query 03:19:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:19:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:19:43 Message to Master queued w/err=0: serial=260638 error=0 03:19:48 Received message from Master: op=Filter serial=260639 03:19:48 Color wheel filter change from 0 to 0 03:19:48 FLIGetFilterPos err=0 currentPosition=0 03:19:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:48 Filter is already there-color wheel unchanged 03:19:48 Received message from Master: op=Shutter serial=260640 03:19:48 Shutter LASER close 03:19:48 Received message from Camera: op=State serial=260642 03:19:48 GetSingleValue result=40 Value=cccccccc 03:19:48 SkyScan query 03:19:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:19:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:49 Parameters OK 03:19:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:49 Set A/D data flow result=40 03:19:49 Set A/D channel type result=40 03:19:49 Set A/D encoding result=40 03:19:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:49 Set channel filter=0.000000e+000 result=40 03:19:49 Config A/D Result=40 03:19:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:49 Get A/D filter: -9.255963e+061 result=40 03:19:49 Get A/D value=-858993460 result=40 03:19:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:49 Parameters OK 03:19:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:49 Set A/D data flow result=40 03:19:49 Set A/D channel type result=40 03:19:49 Set A/D encoding result=40 03:19:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:49 Set channel filter=0.000000e+000 result=40 03:19:49 Config A/D Result=40 03:19:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:49 Get A/D filter: -9.255963e+061 result=40 03:19:49 Get A/D value=-858993460 result=40 03:19:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:49 Aux= 03:19:49 Message to Camera, serial 260642 queued 03:20:25 Received message from Master: op=PointingHead serial=260654 03:20:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:20:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:20:25 Point started: ret=0 03:20:25 point_skyscan result=0 03:20:26 Check angles 03:20:26 SkyScan query 03:20:26 SkyScan query done: ret=0 az=108.765<-7251 ze=-80.955<-17397 Statuses=0009 0009 03:20:26 Msec=0 True Az=108.765 Ze=-80.955 Az status=0009 Ze status=0009 03:20:26 Check angles 03:20:26 SkyScan query 03:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.955<-18797 Statuses=0008 0009 03:20:27 Msec=750 True Az=112.995 Ze=-101.955 Az status=0008 Ze status=0009 03:20:27 Check angles 03:20:27 SkyScan query 03:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 03:20:28 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 03:20:28 Check angles 03:20:28 SkyScan query 03:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.88<-21592 Statuses=0008 0009 03:20:28 Msec=2250 True Az=112.995 Ze=-143.88 Az status=0008 Ze status=0009 03:20:29 Check angles 03:20:29 SkyScan query 03:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.225<-23015 Statuses=0008 0009 03:20:29 Msec=3000 True Az=112.995 Ze=-165.225 Az status=0008 Ze status=0009 03:20:29 Check angles 03:20:29 SkyScan query 03:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:20:30 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:20:30 Message to Master queued w/err=0: serial=260654 error=0 03:20:35 Received message from Master: op=Filter serial=260655 03:20:35 Color wheel filter change from 0 to 0 03:20:35 FLIGetFilterPos err=0 currentPosition=0 03:20:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:35 Filter is already there-color wheel unchanged 03:20:35 Received message from Master: op=Shutter serial=260656 03:20:35 Shutter LASER open 03:20:35 Received message from Camera: op=State serial=260658 03:20:35 GetSingleValue result=40 Value=cccccccc 03:20:35 SkyScan query 03:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:20:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:36 Parameters OK 03:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:36 Set A/D data flow result=40 03:20:36 Set A/D channel type result=40 03:20:36 Set A/D encoding result=40 03:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:36 Set channel filter=0.000000e+000 result=40 03:20:36 Config A/D Result=40 03:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:36 Get A/D filter: -9.255963e+061 result=40 03:20:36 Get A/D value=-858993460 result=40 03:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:36 Parameters OK 03:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:36 Set A/D data flow result=40 03:20:36 Set A/D channel type result=40 03:20:36 Set A/D encoding result=40 03:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:36 Set channel filter=0.000000e+000 result=40 03:20:36 Config A/D Result=40 03:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:36 Get A/D filter: -9.255963e+061 result=40 03:20:36 Get A/D value=-858993460 result=40 03:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:20:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:20:36 Aux= 03:20:36 Message to Camera, serial 260658 queued 03:20:44 Received message from Master: op=Shutter serial=260668 03:20:44 Shutter LASER close 03:20:45 Received message from Master: op=PointingHead serial=260672 03:20:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:20:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:20:45 Point started: ret=0 03:20:45 point_skyscan result=0 03:20:46 Check angles 03:20:46 SkyScan query 03:20:46 SkyScan query done: ret=0 az=90.09<-6006 ze=157.38<-1508 Statuses=0009 0009 03:20:46 Msec=0 True Az=90.09 Ze=157.38 Az status=0009 Ze status=0009 03:20:47 Check angles 03:20:47 SkyScan query 03:20:47 SkyScan query done: ret=0 az=72.585<-4839 ze=136.425<-2905 Statuses=0009 0009 03:20:47 Msec=750 True Az=72.585 Ze=136.425 Az status=0009 Ze status=0009 03:20:47 Check angles 03:20:47 SkyScan query 03:20:48 SkyScan query done: ret=0 az=55.2<-3680 ze=115.515<-4299 Statuses=0009 0009 03:20:48 Msec=1500 True Az=55.2 Ze=115.515 Az status=0009 Ze status=0009 03:20:48 Check angles 03:20:48 SkyScan query 03:20:49 SkyScan query done: ret=0 az=40.995<-2733 ze=94.5<-5700 Statuses=0009 0009 03:20:49 Msec=2250 True Az=40.995 Ze=94.5 Az status=0009 Ze status=0009 03:20:49 Check angles 03:20:49 SkyScan query 03:20:49 SkyScan query done: ret=0 az=40.995<-2733 ze=73.59<-7094 Statuses=0008 0009 03:20:49 Msec=3000 True Az=40.995 Ze=73.59 Az status=0008 Ze status=0009 03:20:50 Check angles 03:20:50 SkyScan query 03:20:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.95<-8470 Statuses=0008 0009 03:20:50 Msec=3750 True Az=40.995 Ze=52.95 Az status=0008 Ze status=0009 03:20:50 Check angles 03:20:50 SkyScan query 03:20:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:20:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:20:51 Message to Master queued w/err=0: serial=260672 error=0 03:20:56 Received message from Master: op=Filter serial=260673 03:20:56 Color wheel filter change from 0 to 0 03:20:56 FLIGetFilterPos err=0 currentPosition=0 03:20:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:56 Filter is already there-color wheel unchanged 03:20:56 Received message from Master: op=Shutter serial=260674 03:20:56 Shutter LASER close 03:20:56 Received message from Camera: op=State serial=260676 03:20:56 GetSingleValue result=40 Value=cccccccc 03:20:56 SkyScan query 03:20:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:20:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:57 Parameters OK 03:20:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:57 Set A/D data flow result=40 03:20:57 Set A/D channel type result=40 03:20:57 Set A/D encoding result=40 03:20:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:57 Set channel filter=0.000000e+000 result=40 03:20:57 Config A/D Result=40 03:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:57 Get A/D filter: -9.255963e+061 result=40 03:20:57 Get A/D value=-858993460 result=40 03:20:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:57 Parameters OK 03:20:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:57 Set A/D data flow result=40 03:20:57 Set A/D channel type result=40 03:20:57 Set A/D encoding result=40 03:20:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:57 Set channel filter=0.000000e+000 result=40 03:20:57 Config A/D Result=40 03:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:57 Get A/D filter: -9.255963e+061 result=40 03:20:57 Get A/D value=-858993460 result=40 03:20:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:20:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:20:57 Aux= 03:20:57 Message to Camera, serial 260676 queued 03:21:34 Received message from Master: op=PointingHead serial=260689 03:21:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:21:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:21:34 Point started: ret=0 03:21:34 point_skyscan result=0 03:21:35 Check angles 03:21:35 SkyScan query 03:21:36 SkyScan query done: ret=0 az=40.995<-2733 ze=21.48<-10568 Statuses=0008 0009 03:21:36 Msec=0 True Az=40.995 Ze=21.48 Az status=0008 Ze status=0009 03:21:36 Check angles 03:21:36 SkyScan query 03:21:36 SkyScan query done: ret=0 az=40.995<-2733 ze=0.525<-11965 Statuses=0008 0009 03:21:36 Msec=750 True Az=40.995 Ze=0.525 Az status=0008 Ze status=0009 03:21:36 Check angles 03:21:36 SkyScan query 03:21:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.52<-13368 Statuses=0008 0009 03:21:37 Msec=1500 True Az=40.995 Ze=-20.52 Az status=0008 Ze status=0009 03:21:37 Check angles 03:21:37 SkyScan query 03:21:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 03:21:38 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 03:21:38 Check angles 03:21:38 SkyScan query 03:21:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:21:39 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:21:39 Message to Master queued w/err=0: serial=260689 error=0 03:21:44 Received message from Master: op=Filter serial=260690 03:21:44 Color wheel filter change from 0 to 0 03:21:44 FLIGetFilterPos err=0 currentPosition=0 03:21:44 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:44 Filter is already there-color wheel unchanged 03:21:44 Received message from Master: op=Shutter serial=260691 03:21:44 Shutter LASER close 03:21:44 Received message from Camera: op=State serial=260693 03:21:44 GetSingleValue result=40 Value=cccccccc 03:21:44 SkyScan query 03:21:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:21:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:44 Parameters OK 03:21:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:44 Set A/D data flow result=40 03:21:44 Set A/D channel type result=40 03:21:44 Set A/D encoding result=40 03:21:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:44 Set channel filter=0.000000e+000 result=40 03:21:44 Config A/D Result=40 03:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:44 Get A/D filter: -9.255963e+061 result=40 03:21:44 Get A/D value=-858993460 result=40 03:21:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:44 Parameters OK 03:21:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:44 Set A/D data flow result=40 03:21:44 Set A/D channel type result=40 03:21:44 Set A/D encoding result=40 03:21:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:44 Set channel filter=0.000000e+000 result=40 03:21:44 Config A/D Result=40 03:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:44 Get A/D filter: -9.255963e+061 result=40 03:21:44 Get A/D value=-858993460 result=40 03:21:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:44 Aux= 03:21:44 Message to Camera, serial 260693 queued 03:22:21 Received message from Master: op=PointingHead serial=260706 03:22:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:22:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:22:21 Point started: ret=0 03:22:21 point_skyscan result=0 03:22:22 Check angles 03:22:22 SkyScan query 03:22:23 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.13<-16542 Statuses=0009 0009 03:22:23 Msec=0 True Az=63.9 Ze=-68.13 Az status=0009 Ze status=0009 03:22:23 Check angles 03:22:23 SkyScan query 03:22:24 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.565<-17971 Statuses=0009 0009 03:22:24 Msec=750 True Az=81.63 Ze=-89.565 Az status=0009 Ze status=0009 03:22:24 Check angles 03:22:24 SkyScan query 03:22:24 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.535<-19369 Statuses=0009 0009 03:22:24 Msec=1500 True Az=99.12 Ze=-110.535 Az status=0009 Ze status=0009 03:22:24 Check angles 03:22:24 SkyScan query 03:22:25 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.43<-20762 Statuses=0009 0009 03:22:25 Msec=2250 True Az=116.55 Ze=-131.43 Az status=0009 Ze status=0009 03:22:25 Check angles 03:22:25 SkyScan query 03:22:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 03:22:26 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 03:22:26 Check angles 03:22:26 SkyScan query 03:22:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 03:22:27 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 03:22:27 Message to Master queued w/err=0: serial=260706 error=0 03:22:32 Received message from Master: op=Filter serial=260707 03:22:32 Color wheel filter change from 0 to 0 03:22:32 FLIGetFilterPos err=0 currentPosition=0 03:22:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:32 Filter is already there-color wheel unchanged 03:22:32 Received message from Master: op=Shutter serial=260708 03:22:32 Shutter LASER close 03:22:32 Received message from Camera: op=State serial=260710 03:22:32 GetSingleValue result=40 Value=cccccccc 03:22:32 SkyScan query 03:22:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:22:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:32 Parameters OK 03:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:32 Set A/D data flow result=40 03:22:32 Set A/D channel type result=40 03:22:32 Set A/D encoding result=40 03:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:32 Set channel filter=0.000000e+000 result=40 03:22:32 Config A/D Result=40 03:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:32 Get A/D filter: -9.255963e+061 result=40 03:22:32 Get A/D value=-858993460 result=40 03:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:32 Parameters OK 03:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:32 Set A/D data flow result=40 03:22:32 Set A/D channel type result=40 03:22:32 Set A/D encoding result=40 03:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:32 Set channel filter=0.000000e+000 result=40 03:22:32 Config A/D Result=40 03:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:32 Get A/D filter: -9.255963e+061 result=40 03:22:32 Get A/D value=-858993460 result=40 03:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:32 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:32 Aux= 03:22:32 Message to Camera, serial 260710 queued 03:23:09 Received message from Master: op=PointingHead serial=260723 03:23:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:23:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:23:10 Point started: ret=0 03:23:10 point_skyscan result=0 03:23:10 Check angles 03:23:10 SkyScan query 03:23:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.255<-23417 Statuses=0009 0009 03:23:11 Msec=0 True Az=113.01 Ze=-171.255 Az status=0009 Ze status=0009 03:23:11 Check angles 03:23:11 SkyScan query 03:23:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:23:12 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:23:12 Message to Master queued w/err=0: serial=260723 error=0 03:23:17 Received message from Master: op=Filter serial=260724 03:23:17 Color wheel filter change from 0 to 0 03:23:17 FLIGetFilterPos err=0 currentPosition=0 03:23:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:17 Filter is already there-color wheel unchanged 03:23:17 Received message from Master: op=Shutter serial=260725 03:23:17 Shutter LASER open 03:23:17 Received message from Camera: op=State serial=260727 03:23:17 GetSingleValue result=40 Value=cccccccc 03:23:17 SkyScan query 03:23:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:23:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:18 Parameters OK 03:23:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:18 Set A/D data flow result=40 03:23:18 Set A/D channel type result=40 03:23:18 Set A/D encoding result=40 03:23:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:18 Set channel filter=0.000000e+000 result=40 03:23:18 Config A/D Result=40 03:23:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:18 Get A/D filter: -9.255963e+061 result=40 03:23:18 Get A/D value=-858993460 result=40 03:23:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:18 Parameters OK 03:23:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:18 Set A/D data flow result=40 03:23:18 Set A/D channel type result=40 03:23:18 Set A/D encoding result=40 03:23:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:18 Set channel filter=0.000000e+000 result=40 03:23:18 Config A/D Result=40 03:23:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:18 Get A/D filter: -9.255963e+061 result=40 03:23:18 Get A/D value=-858993460 result=40 03:23:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:18 Aux= 03:23:18 Message to Camera, serial 260727 queued 03:23:26 Received message from Master: op=Shutter serial=260737 03:23:26 Shutter LASER close 03:23:27 Received message from Master: op=PointingHead serial=260741 03:23:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:23:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:23:27 Point started: ret=0 03:23:27 point_skyscan result=0 03:23:28 Check angles 03:23:28 SkyScan query 03:23:28 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.565<-21571 Statuses=0009 0009 03:23:28 Msec=0 True Az=135.765 Ze=-143.565 Az status=0009 Ze status=0009 03:23:28 Check angles 03:23:28 SkyScan query 03:23:29 SkyScan query done: ret=0 az=153.27<-10218 ze=-122.565<-20171 Statuses=0009 0009 03:23:29 Msec=750 True Az=153.27 Ze=-122.565 Az status=0009 Ze status=0009 03:23:29 Check angles 03:23:29 SkyScan query 03:23:30 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.175<-18745 Statuses=0009 0009 03:23:30 Msec=1500 True Az=171.105 Ze=-101.175 Az status=0009 Ze status=0009 03:23:30 Check angles 03:23:30 SkyScan query 03:23:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.25<-17350 Statuses=0008 0009 03:23:30 Msec=2250 True Az=176.01 Ze=-80.25 Az status=0008 Ze status=0009 03:23:31 Check angles 03:23:31 SkyScan query 03:23:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.265<-15951 Statuses=0008 0009 03:23:31 Msec=3000 True Az=176.01 Ze=-59.265 Az status=0008 Ze status=0009 03:23:31 Check angles 03:23:31 SkyScan query 03:23:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:23:32 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:23:32 Message to Master queued w/err=0: serial=260741 error=0 03:23:37 Received message from Master: op=Filter serial=260742 03:23:37 Color wheel filter change from 0 to 0 03:23:37 FLIGetFilterPos err=0 currentPosition=0 03:23:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:37 Filter is already there-color wheel unchanged 03:23:37 Received message from Master: op=Shutter serial=260743 03:23:37 Shutter LASER close 03:23:37 Received message from Camera: op=State serial=260745 03:23:37 GetSingleValue result=40 Value=cccccccc 03:23:37 SkyScan query 03:23:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:23:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:38 Parameters OK 03:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:38 Set A/D data flow result=40 03:23:38 Set A/D channel type result=40 03:23:38 Set A/D encoding result=40 03:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:38 Set channel filter=0.000000e+000 result=40 03:23:38 Config A/D Result=40 03:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:38 Get A/D filter: -9.255963e+061 result=40 03:23:38 Get A/D value=-858993460 result=40 03:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:38 Parameters OK 03:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:38 Set A/D data flow result=40 03:23:38 Set A/D channel type result=40 03:23:38 Set A/D encoding result=40 03:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:38 Set channel filter=0.000000e+000 result=40 03:23:38 Config A/D Result=40 03:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:38 Get A/D filter: -9.255963e+061 result=40 03:23:38 Get A/D value=-858993460 result=40 03:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:38 Aux= 03:23:38 Message to Camera, serial 260745 queued 03:24:15 Received message from Master: op=PointingHead serial=260758 03:24:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:24:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:24:15 Point started: ret=0 03:24:15 point_skyscan result=0 03:24:16 Check angles 03:24:16 SkyScan query 03:24:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.24<-13416 Statuses=0008 0009 03:24:17 Msec=0 True Az=175.995 Ze=-21.24 Az status=0008 Ze status=0009 03:24:17 Check angles 03:24:17 SkyScan query 03:24:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.315<-12021 Statuses=0008 0009 03:24:17 Msec=750 True Az=175.995 Ze=-0.315 Az status=0008 Ze status=0009 03:24:18 Check angles 03:24:18 SkyScan query 03:24:18 SkyScan query done: ret=0 az=175.995<-11733 ze=21.105<-10593 Statuses=0008 0009 03:24:18 Msec=1500 True Az=175.995 Ze=21.105 Az status=0008 Ze status=0009 03:24:18 Check angles 03:24:18 SkyScan query 03:24:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 03:24:19 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 03:24:19 Check angles 03:24:19 SkyScan query 03:24:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 03:24:20 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 03:24:20 Message to Master queued w/err=0: serial=260758 error=0 03:24:25 Received message from Master: op=Filter serial=260759 03:24:25 Color wheel filter change from 0 to 0 03:24:25 FLIGetFilterPos err=0 currentPosition=0 03:24:25 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:25 Filter is already there-color wheel unchanged 03:24:25 Received message from Master: op=Shutter serial=260760 03:24:25 Shutter LASER close 03:24:25 Received message from Camera: op=State serial=260762 03:24:25 GetSingleValue result=40 Value=cccccccc 03:24:25 SkyScan query 03:24:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:24:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:25 Parameters OK 03:24:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:25 Set A/D data flow result=40 03:24:25 Set A/D channel type result=40 03:24:25 Set A/D encoding result=40 03:24:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:25 Set channel filter=0.000000e+000 result=40 03:24:25 Config A/D Result=40 03:24:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:25 Get A/D filter: -9.255963e+061 result=40 03:24:25 Get A/D value=-858993460 result=40 03:24:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:25 Parameters OK 03:24:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:25 Set A/D data flow result=40 03:24:25 Set A/D channel type result=40 03:24:25 Set A/D encoding result=40 03:24:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:25 Set channel filter=0.000000e+000 result=40 03:24:25 Config A/D Result=40 03:24:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:25 Get A/D filter: -9.255963e+061 result=40 03:24:25 Get A/D value=-858993460 result=40 03:24:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:25 Aux= 03:24:25 Message to Camera, serial 260762 queued 03:25:02 Received message from Master: op=PointingHead serial=260775 03:25:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:25:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:25:03 Point started: ret=0 03:25:03 point_skyscan result=0 03:25:03 Check angles 03:25:03 SkyScan query 03:25:04 SkyScan query done: ret=0 az=152.955<-10197 ze=8.715<-11419 Statuses=0009 0009 03:25:04 Msec=0 True Az=152.955 Ze=8.715 Az status=0009 Ze status=0009 03:25:04 Check angles 03:25:04 SkyScan query 03:25:05 SkyScan query done: ret=0 az=135.555<-9037 ze=-12.21<-12814 Statuses=0009 0009 03:25:05 Msec=750 True Az=135.555 Ze=-12.21 Az status=0009 Ze status=0009 03:25:05 Check angles 03:25:05 SkyScan query 03:25:05 SkyScan query done: ret=0 az=118.065<-7871 ze=-33.15<-14210 Statuses=0009 0009 03:25:05 Msec=1500 True Az=118.065 Ze=-33.15 Az status=0009 Ze status=0009 03:25:06 Check angles 03:25:06 SkyScan query 03:25:06 SkyScan query done: ret=0 az=100.68<-6712 ze=-51.525<-15435 Statuses=0009 0009 03:25:06 Msec=2250 True Az=100.68 Ze=-51.525 Az status=0009 Ze status=0009 03:25:06 Check angles 03:25:06 SkyScan query 03:25:07 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 03:25:07 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 03:25:07 Check angles 03:25:07 SkyScan query 03:25:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:25:08 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:25:08 Message to Master queued w/err=0: serial=260775 error=0 03:25:13 Received message from Master: op=Filter serial=260776 03:25:13 Color wheel filter change from 0 to 0 03:25:13 FLIGetFilterPos err=0 currentPosition=0 03:25:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:13 Filter is already there-color wheel unchanged 03:25:13 Received message from Master: op=Shutter serial=260777 03:25:13 Shutter LASER close 03:25:13 Received message from Camera: op=State serial=260779 03:25:13 GetSingleValue result=40 Value=cccccccc 03:25:13 SkyScan query 03:25:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:25:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:14 Parameters OK 03:25:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:14 Set A/D data flow result=40 03:25:14 Set A/D channel type result=40 03:25:14 Set A/D encoding result=40 03:25:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:14 Set channel filter=0.000000e+000 result=40 03:25:14 Config A/D Result=40 03:25:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:14 Get A/D filter: -9.255963e+061 result=40 03:25:14 Get A/D value=-858993460 result=40 03:25:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:14 Parameters OK 03:25:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:14 Set A/D data flow result=40 03:25:14 Set A/D channel type result=40 03:25:14 Set A/D encoding result=40 03:25:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:14 Set channel filter=0.000000e+000 result=40 03:25:14 Config A/D Result=40 03:25:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:14 Get A/D filter: -9.255963e+061 result=40 03:25:14 Get A/D value=-858993460 result=40 03:25:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:14 Aux= 03:25:14 Message to Camera, serial 260779 queued 03:25:50 Received message from Master: op=PointingHead serial=260792 03:25:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:25:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:25:51 Point started: ret=0 03:25:51 point_skyscan result=0 03:25:51 Check angles 03:25:51 SkyScan query 03:25:52 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.135<-17409 Statuses=0009 0009 03:25:52 Msec=0 True Az=108.975 Ze=-81.135 Az status=0009 Ze status=0009 03:25:52 Check angles 03:25:52 SkyScan query 03:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.105<-18807 Statuses=0008 0009 03:25:53 Msec=750 True Az=112.995 Ze=-102.105 Az status=0008 Ze status=0009 03:25:53 Check angles 03:25:53 SkyScan query 03:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.075<-20205 Statuses=0008 0009 03:25:54 Msec=1500 True Az=112.995 Ze=-123.075 Az status=0008 Ze status=0009 03:25:54 Check angles 03:25:54 SkyScan query 03:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.03<-21602 Statuses=0008 0009 03:25:54 Msec=2250 True Az=112.995 Ze=-144.03 Az status=0008 Ze status=0009 03:25:54 Check angles 03:25:54 SkyScan query 03:25:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 03:25:55 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 03:25:55 Check angles 03:25:55 SkyScan query 03:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:25:56 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:25:56 Message to Master queued w/err=0: serial=260792 error=0 03:26:01 Received message from Master: op=Filter serial=260793 03:26:01 Color wheel filter change from 0 to 0 03:26:01 FLIGetFilterPos err=0 currentPosition=0 03:26:01 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:01 Filter is already there-color wheel unchanged 03:26:01 Received message from Master: op=Shutter serial=260794 03:26:01 Shutter LASER open 03:26:01 Received message from Camera: op=State serial=260796 03:26:01 GetSingleValue result=40 Value=cccccccc 03:26:01 SkyScan query 03:26:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:26:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:02 Parameters OK [UTC 2018-12-19 03:26:02] 03:26:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:02 Set A/D data flow result=40 03:26:02 Set A/D channel type result=40 03:26:02 Set A/D encoding result=40 03:26:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:02 Set channel filter=0.000000e+000 result=40 03:26:02 Config A/D Result=40 03:26:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:02 Get A/D filter: -9.255963e+061 result=40 03:26:02 Get A/D value=-858993460 result=40 03:26:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:02 Parameters OK 03:26:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:02 Set A/D data flow result=40 03:26:02 Set A/D channel type result=40 03:26:02 Set A/D encoding result=40 03:26:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:02 Set channel filter=0.000000e+000 result=40 03:26:02 Config A/D Result=40 03:26:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:02 Get A/D filter: -9.255963e+061 result=40 03:26:02 Get A/D value=-858993460 result=40 03:26:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:02 Aux= 03:26:02 Message to Camera, serial 260796 queued 03:26:10 Received message from Master: op=Shutter serial=260806 03:26:10 Shutter LASER close 03:26:11 Received message from Master: op=PointingHead serial=260810 03:26:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:26:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:26:11 Point started: ret=0 03:26:11 point_skyscan result=0 03:26:12 Check angles 03:26:12 SkyScan query 03:26:12 SkyScan query done: ret=0 az=89.835<-5989 ze=157.245<-1517 Statuses=0009 0009 03:26:12 Msec=0 True Az=89.835 Ze=157.245 Az status=0009 Ze status=0009 03:26:12 Check angles 03:26:12 SkyScan query 03:26:13 SkyScan query done: ret=0 az=72.285<-4819 ze=136.245<-2917 Statuses=0009 0009 03:26:13 Msec=750 True Az=72.285 Ze=136.245 Az status=0009 Ze status=0009 03:26:13 Check angles 03:26:13 SkyScan query 03:26:14 SkyScan query done: ret=0 az=54.99<-3666 ze=115.35<-4310 Statuses=0009 0009 03:26:14 Msec=1500 True Az=54.99 Ze=115.35 Az status=0009 Ze status=0009 03:26:14 Check angles 03:26:14 SkyScan query 03:26:15 SkyScan query done: ret=0 az=41.01<-2734 ze=94.365<-5709 Statuses=0009 0009 03:26:15 Msec=2250 True Az=41.01 Ze=94.365 Az status=0009 Ze status=0009 03:26:15 Check angles 03:26:15 SkyScan query 03:26:15 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 03:26:15 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 03:26:15 Check angles 03:26:15 SkyScan query 03:26:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 03:26:16 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 03:26:16 Check angles 03:26:16 SkyScan query 03:26:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:26:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:26:17 Message to Master queued w/err=0: serial=260810 error=0 03:26:22 Received message from Master: op=Filter serial=260811 03:26:22 Color wheel filter change from 0 to 0 03:26:22 FLIGetFilterPos err=0 currentPosition=0 03:26:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:22 Filter is already there-color wheel unchanged 03:26:22 Received message from Master: op=Shutter serial=260812 03:26:22 Shutter LASER close 03:26:22 Received message from Camera: op=State serial=260814 03:26:22 GetSingleValue result=40 Value=cccccccc 03:26:22 SkyScan query 03:26:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:26:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:23 Parameters OK 03:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:23 Set A/D data flow result=40 03:26:23 Set A/D channel type result=40 03:26:23 Set A/D encoding result=40 03:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:23 Set channel filter=0.000000e+000 result=40 03:26:23 Config A/D Result=40 03:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:23 Get A/D filter: -9.255963e+061 result=40 03:26:23 Get A/D value=-858993460 result=40 03:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:23 Parameters OK 03:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:23 Set A/D data flow result=40 03:26:23 Set A/D channel type result=40 03:26:23 Set A/D encoding result=40 03:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:23 Set channel filter=0.000000e+000 result=40 03:26:23 Config A/D Result=40 03:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:23 Get A/D filter: -9.255963e+061 result=40 03:26:23 Get A/D value=-858993460 result=40 03:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:23 Aux= 03:26:23 Message to Camera, serial 260814 queued 03:27:00 Received message from Master: op=PointingHead serial=260827 03:27:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:27:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:27:00 Point started: ret=0 03:27:00 point_skyscan result=0 03:27:01 Check angles 03:27:01 SkyScan query 03:27:01 SkyScan query done: ret=0 az=40.995<-2733 ze=21.15<-10590 Statuses=0008 0009 03:27:01 Msec=0 True Az=40.995 Ze=21.15 Az status=0008 Ze status=0009 03:27:01 Check angles 03:27:01 SkyScan query 03:27:02 SkyScan query done: ret=0 az=40.995<-2733 ze=0.15<-11990 Statuses=0008 0009 03:27:02 Msec=750 True Az=40.995 Ze=0.15 Az status=0008 Ze status=0009 03:27:02 Check angles 03:27:02 SkyScan query 03:27:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.775<-13385 Statuses=0008 0009 03:27:03 Msec=1500 True Az=40.995 Ze=-20.775 Az status=0008 Ze status=0009 03:27:03 Check angles 03:27:03 SkyScan query 03:27:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 03:27:04 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 03:27:04 Check angles 03:27:04 SkyScan query 03:27:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:27:04 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:27:04 Message to Master queued w/err=0: serial=260827 error=0 03:27:09 Received message from Master: op=Filter serial=260828 03:27:09 Color wheel filter change from 0 to 0 03:27:09 FLIGetFilterPos err=0 currentPosition=0 03:27:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:09 Filter is already there-color wheel unchanged 03:27:09 Received message from Master: op=Shutter serial=260829 03:27:09 Shutter LASER close 03:27:10 Received message from Camera: op=State serial=260831 03:27:10 GetSingleValue result=40 Value=cccccccc 03:27:10 SkyScan query 03:27:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:27:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:10 Parameters OK 03:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:10 Set A/D data flow result=40 03:27:10 Set A/D channel type result=40 03:27:10 Set A/D encoding result=40 03:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:10 Set channel filter=0.000000e+000 result=40 03:27:10 Config A/D Result=40 03:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:10 Get A/D filter: -9.255963e+061 result=40 03:27:10 Get A/D value=-858993460 result=40 03:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:10 Parameters OK 03:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:10 Set A/D data flow result=40 03:27:10 Set A/D channel type result=40 03:27:10 Set A/D encoding result=40 03:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:10 Set channel filter=0.000000e+000 result=40 03:27:10 Config A/D Result=40 03:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:10 Get A/D filter: -9.255963e+061 result=40 03:27:10 Get A/D value=-858993460 result=40 03:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:10 Aux= 03:27:10 Message to Camera, serial 260831 queued 03:27:47 Received message from Master: op=PointingHead serial=260844 03:27:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:27:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:27:47 Point started: ret=0 03:27:47 point_skyscan result=0 03:27:48 Check angles 03:27:48 SkyScan query 03:27:49 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.175<-16545 Statuses=0009 0009 03:27:49 Msec=0 True Az=63.855 Ze=-68.175 Az status=0009 Ze status=0009 03:27:49 Check angles 03:27:49 SkyScan query 03:27:49 SkyScan query done: ret=0 az=81.195<-5413 ze=-89.145<-17943 Statuses=0009 0009 03:27:49 Msec=750 True Az=81.195 Ze=-89.145 Az status=0009 Ze status=0009 03:27:50 Check angles 03:27:50 SkyScan query 03:27:50 SkyScan query done: ret=0 az=98.79<-6586 ze=-110.07<-19338 Statuses=0009 0009 03:27:50 Msec=1500 True Az=98.79 Ze=-110.07 Az status=0009 Ze status=0009 03:27:50 Check angles 03:27:50 SkyScan query 03:27:51 SkyScan query done: ret=0 az=116.175<-7745 ze=-131.055<-20737 Statuses=0009 0009 03:27:51 Msec=2250 True Az=116.175 Ze=-131.055 Az status=0009 Ze status=0009 03:27:51 Check angles 03:27:51 SkyScan query 03:27:52 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 03:27:52 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 03:27:52 Check angles 03:27:52 SkyScan query 03:27:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:27:52 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:27:52 Message to Master queued w/err=0: serial=260844 error=0 03:27:57 Received message from Master: op=Filter serial=260845 03:27:57 Color wheel filter change from 0 to 0 03:27:57 FLIGetFilterPos err=0 currentPosition=0 03:27:57 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:57 Filter is already there-color wheel unchanged 03:27:58 Received message from Master: op=Shutter serial=260846 03:27:58 Shutter LASER close 03:27:58 Received message from Camera: op=State serial=260848 03:27:58 GetSingleValue result=40 Value=cccccccc 03:27:58 SkyScan query 03:27:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:27:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:58 Parameters OK 03:27:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:58 Set A/D data flow result=40 03:27:58 Set A/D channel type result=40 03:27:58 Set A/D encoding result=40 03:27:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:58 Set channel filter=0.000000e+000 result=40 03:27:58 Config A/D Result=40 03:27:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:58 Get A/D filter: -9.255963e+061 result=40 03:27:58 Get A/D value=-858993460 result=40 03:27:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:58 Parameters OK 03:27:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:58 Set A/D data flow result=40 03:27:58 Set A/D channel type result=40 03:27:58 Set A/D encoding result=40 03:27:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:58 Set channel filter=0.000000e+000 result=40 03:27:58 Config A/D Result=40 03:27:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:58 Get A/D filter: -9.255963e+061 result=40 03:27:58 Get A/D value=-858993460 result=40 03:27:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:58 Aux= 03:27:58 Message to Camera, serial 260848 queued 03:28:35 Received message from Master: op=PointingHead serial=260861 03:28:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:28:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:28:35 Point started: ret=0 03:28:35 point_skyscan result=0 03:28:36 Check angles 03:28:36 SkyScan query 03:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0009 0009 03:28:37 Msec=0 True Az=112.995 Ze=-171.435 Az status=0009 Ze status=0009 03:28:37 Check angles 03:28:37 SkyScan query 03:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:28:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:28:37 Message to Master queued w/err=0: serial=260861 error=0 03:28:42 Received message from Master: op=Filter serial=260862 03:28:42 Color wheel filter change from 0 to 0 03:28:42 FLIGetFilterPos err=0 currentPosition=0 03:28:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:42 Filter is already there-color wheel unchanged 03:28:43 Received message from Master: op=Shutter serial=260863 03:28:43 Shutter LASER open 03:28:43 Received message from Camera: op=State serial=260865 03:28:43 GetSingleValue result=40 Value=cccccccc 03:28:43 SkyScan query 03:28:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:28:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:43 Parameters OK 03:28:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:43 Set A/D data flow result=40 03:28:43 Set A/D channel type result=40 03:28:43 Set A/D encoding result=40 03:28:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:43 Set channel filter=0.000000e+000 result=40 03:28:43 Config A/D Result=40 03:28:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:43 Get A/D filter: -9.255963e+061 result=40 03:28:43 Get A/D value=-858993460 result=40 03:28:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:43 Parameters OK 03:28:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:43 Set A/D data flow result=40 03:28:43 Set A/D channel type result=40 03:28:43 Set A/D encoding result=40 03:28:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:43 Set channel filter=0.000000e+000 result=40 03:28:43 Config A/D Result=40 03:28:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:43 Get A/D filter: -9.255963e+061 result=40 03:28:43 Get A/D value=-858993460 result=40 03:28:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:43 Aux= 03:28:43 Message to Camera, serial 260865 queued 03:28:52 Received message from Master: op=Shutter serial=260875 03:28:52 Shutter LASER close 03:28:52 Received message from Master: op=PointingHead serial=260879 03:28:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:28:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:28:53 Point started: ret=0 03:28:53 point_skyscan result=0 03:28:54 Check angles 03:28:54 SkyScan query 03:28:54 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.445<-21563 Statuses=0009 0009 03:28:54 Msec=0 True Az=135.84 Ze=-143.445 Az status=0009 Ze status=0009 03:28:54 Check angles 03:28:54 SkyScan query 03:28:55 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.43<-20162 Statuses=0009 0009 03:28:55 Msec=750 True Az=153.36 Ze=-122.43 Az status=0009 Ze status=0009 03:28:55 Check angles 03:28:55 SkyScan query 03:28:56 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.58<-18772 Statuses=0009 0009 03:28:56 Msec=1500 True Az=170.805 Ze=-101.58 Az status=0009 Ze status=0009 03:28:56 Check angles 03:28:56 SkyScan query 03:28:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.55<-17370 Statuses=0008 0009 03:28:56 Msec=2250 True Az=176.01 Ze=-80.55 Az status=0008 Ze status=0009 03:28:57 Check angles 03:28:57 SkyScan query 03:28:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.61<-15974 Statuses=0008 0009 03:28:57 Msec=3000 True Az=176.01 Ze=-59.61 Az status=0008 Ze status=0009 03:28:57 Check angles 03:28:57 SkyScan query 03:28:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:28:58 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:28:58 Message to Master queued w/err=0: serial=260879 error=0 03:29:03 Received message from Master: op=Filter serial=260880 03:29:03 Color wheel filter change from 0 to 0 03:29:03 FLIGetFilterPos err=0 currentPosition=0 03:29:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:03 Filter is already there-color wheel unchanged 03:29:03 Received message from Master: op=Shutter serial=260881 03:29:03 Shutter LASER close 03:29:03 Received message from Camera: op=State serial=260883 03:29:03 GetSingleValue result=40 Value=cccccccc 03:29:03 SkyScan query 03:29:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:29:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:04 Parameters OK 03:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:04 Set A/D data flow result=40 03:29:04 Set A/D channel type result=40 03:29:04 Set A/D encoding result=40 03:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:04 Set channel filter=0.000000e+000 result=40 03:29:04 Config A/D Result=40 03:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:04 Get A/D filter: -9.255963e+061 result=40 03:29:04 Get A/D value=-858993460 result=40 03:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:04 Parameters OK 03:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:04 Set A/D data flow result=40 03:29:04 Set A/D channel type result=40 03:29:04 Set A/D encoding result=40 03:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:04 Set channel filter=0.000000e+000 result=40 03:29:04 Config A/D Result=40 03:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:04 Get A/D filter: -9.255963e+061 result=40 03:29:04 Get A/D value=-858993460 result=40 03:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:04 Aux= 03:29:04 Message to Camera, serial 260883 queued 03:29:41 Received message from Master: op=PointingHead serial=260896 03:29:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:29:41 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:29:41 Point started: ret=0 03:29:41 point_skyscan result=0 03:29:42 Check angles 03:29:42 SkyScan query 03:29:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.765<-13451 Statuses=0008 0009 03:29:42 Msec=0 True Az=175.995 Ze=-21.765 Az status=0008 Ze status=0009 03:29:43 Check angles 03:29:43 SkyScan query 03:29:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.345<-12023 Statuses=0008 0009 03:29:43 Msec=750 True Az=175.995 Ze=-0.345 Az status=0008 Ze status=0009 03:29:43 Check angles 03:29:43 SkyScan query 03:29:44 SkyScan query done: ret=0 az=175.995<-11733 ze=21.06<-10596 Statuses=0008 0009 03:29:44 Msec=1500 True Az=175.995 Ze=21.06 Az status=0008 Ze status=0009 03:29:44 Check angles 03:29:44 SkyScan query 03:29:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 03:29:45 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 03:29:45 Check angles 03:29:45 SkyScan query 03:29:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 03:29:45 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 03:29:45 Message to Master queued w/err=0: serial=260896 error=0 03:29:50 Received message from Master: op=Filter serial=260897 03:29:50 Color wheel filter change from 0 to 0 03:29:50 FLIGetFilterPos err=0 currentPosition=0 03:29:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:50 Filter is already there-color wheel unchanged 03:29:51 Received message from Master: op=Shutter serial=260898 03:29:51 Shutter LASER close 03:29:51 Received message from Camera: op=State serial=260900 03:29:51 GetSingleValue result=40 Value=cccccccc 03:29:51 SkyScan query 03:29:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:29:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:51 Parameters OK 03:29:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:51 Set A/D data flow result=40 03:29:51 Set A/D channel type result=40 03:29:51 Set A/D encoding result=40 03:29:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:51 Set channel filter=0.000000e+000 result=40 03:29:51 Config A/D Result=40 03:29:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:51 Get A/D filter: -9.255963e+061 result=40 03:29:51 Get A/D value=-858993460 result=40 03:29:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:51 Parameters OK 03:29:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:51 Set A/D data flow result=40 03:29:51 Set A/D channel type result=40 03:29:51 Set A/D encoding result=40 03:29:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:51 Set channel filter=0.000000e+000 result=40 03:29:51 Config A/D Result=40 03:29:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:51 Get A/D filter: -9.255963e+061 result=40 03:29:51 Get A/D value=-858993460 result=40 03:29:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:51 Aux= 03:29:51 Message to Camera, serial 260900 queued 03:30:28 Received message from Master: op=PointingHead serial=260913 03:30:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:30:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:30:28 Point started: ret=0 03:30:28 point_skyscan result=0 03:30:29 Check angles 03:30:29 SkyScan query 03:30:30 SkyScan query done: ret=0 az=152.745<-10183 ze=8.37<-11442 Statuses=0009 0009 03:30:30 Msec=0 True Az=152.745 Ze=8.37 Az status=0009 Ze status=0009 03:30:30 Check angles 03:30:30 SkyScan query 03:30:31 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.525<-12835 Statuses=0009 0009 03:30:31 Msec=750 True Az=135.135 Ze=-12.525 Az status=0009 Ze status=0009 03:30:31 Check angles 03:30:31 SkyScan query 03:30:31 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.525<-14235 Statuses=0009 0009 03:30:31 Msec=1500 True Az=117.81 Ze=-33.525 Az status=0009 Ze status=0009 03:30:31 Check angles 03:30:31 SkyScan query 03:30:32 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.555<-15437 Statuses=0009 0009 03:30:32 Msec=2250 True Az=100.29 Ze=-51.555 Az status=0009 Ze status=0009 03:30:32 Check angles 03:30:32 SkyScan query 03:30:33 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:30:33 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:30:33 Check angles 03:30:33 SkyScan query 03:30:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:30:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:30:34 Message to Master queued w/err=0: serial=260913 error=0 03:30:39 Received message from Master: op=Filter serial=260914 03:30:39 Color wheel filter change from 0 to 0 03:30:39 FLIGetFilterPos err=0 currentPosition=0 03:30:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:39 Filter is already there-color wheel unchanged 03:30:39 Received message from Master: op=Shutter serial=260915 03:30:39 Shutter LASER close 03:30:39 Received message from Camera: op=State serial=260917 03:30:39 GetSingleValue result=40 Value=cccccccc 03:30:39 SkyScan query 03:30:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:30:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:39 Parameters OK 03:30:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:39 Set A/D data flow result=40 03:30:39 Set A/D channel type result=40 03:30:39 Set A/D encoding result=40 03:30:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:39 Set channel filter=0.000000e+000 result=40 03:30:39 Config A/D Result=40 03:30:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:39 Get A/D filter: -9.255963e+061 result=40 03:30:39 Get A/D value=-858993460 result=40 03:30:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:39 Parameters OK 03:30:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:39 Set A/D data flow result=40 03:30:39 Set A/D channel type result=40 03:30:39 Set A/D encoding result=40 03:30:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:39 Set channel filter=0.000000e+000 result=40 03:30:39 Config A/D Result=40 03:30:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:39 Get A/D filter: -9.255963e+061 result=40 03:30:39 Get A/D value=-858993460 result=40 03:30:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:39 Aux= 03:30:39 Message to Camera, serial 260917 queued 03:31:16 Received message from Master: op=PointingHead serial=260930 03:31:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:31:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:31:16 Point started: ret=0 03:31:16 point_skyscan result=0 03:31:17 Check angles 03:31:17 SkyScan query 03:31:18 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.12<-17408 Statuses=0009 0009 03:31:18 Msec=0 True Az=108.9 Ze=-81.12 Az status=0009 Ze status=0009 03:31:18 Check angles 03:31:18 SkyScan query 03:31:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 03:31:19 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 03:31:19 Check angles 03:31:19 SkyScan query 03:31:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.03<-20202 Statuses=0008 0009 03:31:19 Msec=1500 True Az=112.995 Ze=-123.03 Az status=0008 Ze status=0009 03:31:19 Check angles 03:31:19 SkyScan query 03:31:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 03:31:20 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 03:31:20 Check angles 03:31:20 SkyScan query 03:31:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.94<-22996 Statuses=0008 0009 03:31:21 Msec=3000 True Az=112.995 Ze=-164.94 Az status=0008 Ze status=0009 03:31:21 Check angles 03:31:21 SkyScan query 03:31:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:31:22 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:31:22 Message to Master queued w/err=0: serial=260930 error=0 03:31:27 Received message from Master: op=Filter serial=260931 03:31:27 Color wheel filter change from 0 to 0 03:31:27 FLIGetFilterPos err=0 currentPosition=0 03:31:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:27 Filter is already there-color wheel unchanged 03:31:27 Received message from Master: op=Shutter serial=260932 03:31:27 Shutter LASER open 03:31:27 Received message from Camera: op=State serial=260934 03:31:27 GetSingleValue result=40 Value=cccccccc 03:31:27 SkyScan query 03:31:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:31:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:27 Parameters OK 03:31:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:27 Set A/D data flow result=40 03:31:27 Set A/D channel type result=40 03:31:27 Set A/D encoding result=40 03:31:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:27 Set channel filter=0.000000e+000 result=40 03:31:27 Config A/D Result=40 03:31:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:27 Get A/D filter: -9.255963e+061 result=40 03:31:27 Get A/D value=-858993460 result=40 03:31:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:27 Parameters OK 03:31:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:27 Set A/D data flow result=40 03:31:27 Set A/D channel type result=40 03:31:27 Set A/D encoding result=40 03:31:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:27 Set channel filter=0.000000e+000 result=40 03:31:27 Config A/D Result=40 03:31:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:27 Get A/D filter: -9.255963e+061 result=40 03:31:27 Get A/D value=-858993460 result=40 03:31:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:27 Aux= 03:31:27 Message to Camera, serial 260934 queued 03:31:36 Received message from Master: op=Shutter serial=260944 03:31:36 Shutter LASER close 03:31:36 Received message from Master: op=PointingHead serial=260948 03:31:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:31:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:31:37 Point started: ret=0 03:31:37 point_skyscan result=0 03:31:37 Check angles 03:31:37 SkyScan query 03:31:38 SkyScan query done: ret=0 az=90.15<-6010 ze=157.455<-1503 Statuses=0009 0009 03:31:38 Msec=0 True Az=90.15 Ze=157.455 Az status=0009 Ze status=0009 03:31:38 Check angles 03:31:38 SkyScan query 03:31:39 SkyScan query done: ret=0 az=72.66<-4844 ze=136.44<-2904 Statuses=0009 0009 03:31:39 Msec=750 True Az=72.66 Ze=136.44 Az status=0009 Ze status=0009 03:31:39 Check angles 03:31:39 SkyScan query 03:31:40 SkyScan query done: ret=0 az=55.185<-3679 ze=115.575<-4295 Statuses=0009 0009 03:31:40 Msec=1500 True Az=55.185 Ze=115.575 Az status=0009 Ze status=0009 03:31:40 Check angles 03:31:40 SkyScan query 03:31:40 SkyScan query done: ret=0 az=41.01<-2734 ze=94.545<-5697 Statuses=0009 0009 03:31:40 Msec=2250 True Az=41.01 Ze=94.545 Az status=0009 Ze status=0009 03:31:40 Check angles 03:31:40 SkyScan query 03:31:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.65<-7090 Statuses=0008 0009 03:31:41 Msec=3000 True Az=40.995 Ze=73.65 Az status=0008 Ze status=0009 03:31:41 Check angles 03:31:41 SkyScan query 03:31:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.95<-8470 Statuses=0008 0009 03:31:42 Msec=3750 True Az=40.995 Ze=52.95 Az status=0008 Ze status=0009 03:31:42 Check angles 03:31:42 SkyScan query 03:31:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:31:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:31:43 Message to Master queued w/err=0: serial=260948 error=0 03:31:48 Received message from Master: op=Filter serial=260949 03:31:48 Color wheel filter change from 0 to 0 03:31:48 FLIGetFilterPos err=0 currentPosition=0 03:31:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:48 Filter is already there-color wheel unchanged 03:31:48 Received message from Master: op=Shutter serial=260950 03:31:48 Shutter LASER close 03:31:48 Received message from Camera: op=State serial=260952 03:31:48 GetSingleValue result=40 Value=cccccccc 03:31:48 SkyScan query 03:31:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:31:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:48 Parameters OK 03:31:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:48 Set A/D data flow result=40 03:31:48 Set A/D channel type result=40 03:31:48 Set A/D encoding result=40 03:31:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:48 Set channel filter=0.000000e+000 result=40 03:31:48 Config A/D Result=40 03:31:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:48 Get A/D filter: -9.255963e+061 result=40 03:31:48 Get A/D value=-858993460 result=40 03:31:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:48 Parameters OK 03:31:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:48 Set A/D data flow result=40 03:31:48 Set A/D channel type result=40 03:31:48 Set A/D encoding result=40 03:31:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:48 Set channel filter=0.000000e+000 result=40 03:31:48 Config A/D Result=40 03:31:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:48 Get A/D filter: -9.255963e+061 result=40 03:31:48 Get A/D value=-858993460 result=40 03:31:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:48 Aux= 03:31:48 Message to Camera, serial 260952 queued 03:32:25 Received message from Master: op=PointingHead serial=260965 03:32:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:32:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:32:26 Point started: ret=0 03:32:26 point_skyscan result=0 03:32:27 Check angles 03:32:27 SkyScan query 03:32:27 SkyScan query done: ret=0 az=40.995<-2733 ze=21.195<-10587 Statuses=0008 0009 03:32:27 Msec=0 True Az=40.995 Ze=21.195 Az status=0008 Ze status=0009 03:32:27 Check angles 03:32:27 SkyScan query 03:32:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.225<-12015 Statuses=0008 0009 03:32:28 Msec=750 True Az=40.995 Ze=-0.225 Az status=0008 Ze status=0009 03:32:28 Check angles 03:32:28 SkyScan query 03:32:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.18<-13412 Statuses=0008 0009 03:32:29 Msec=1500 True Az=40.995 Ze=-21.18 Az status=0008 Ze status=0009 03:32:29 Check angles 03:32:29 SkyScan query 03:32:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 03:32:29 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 03:32:30 Check angles 03:32:30 SkyScan query 03:32:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:32:30 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:32:30 Message to Master queued w/err=0: serial=260965 error=0 03:32:35 Received message from Master: op=Filter serial=260966 03:32:35 Color wheel filter change from 0 to 0 03:32:35 FLIGetFilterPos err=0 currentPosition=0 03:32:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:35 Filter is already there-color wheel unchanged 03:32:35 Received message from Master: op=Shutter serial=260967 03:32:35 Shutter LASER close 03:32:35 Received message from Camera: op=State serial=260969 03:32:35 GetSingleValue result=40 Value=cccccccc 03:32:35 SkyScan query 03:32:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:32:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:36 Parameters OK 03:32:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:36 Set A/D data flow result=40 03:32:36 Set A/D channel type result=40 03:32:36 Set A/D encoding result=40 03:32:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:36 Set channel filter=0.000000e+000 result=40 03:32:36 Config A/D Result=40 03:32:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:36 Get A/D filter: -9.255963e+061 result=40 03:32:36 Get A/D value=-858993460 result=40 03:32:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:36 Parameters OK 03:32:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:36 Set A/D data flow result=40 03:32:36 Set A/D channel type result=40 03:32:36 Set A/D encoding result=40 03:32:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:36 Set channel filter=0.000000e+000 result=40 03:32:36 Config A/D Result=40 03:32:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:36 Get A/D filter: -9.255963e+061 result=40 03:32:36 Get A/D value=-858993460 result=40 03:32:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:36 Aux= 03:32:36 Message to Camera, serial 260969 queued 03:33:12 Received message from Master: op=PointingHead serial=260981 03:33:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:33:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:33:12 Point started: ret=0 03:33:12 point_skyscan result=0 03:33:13 Check angles 03:33:13 SkyScan query 03:33:14 SkyScan query done: ret=0 az=64.5<-4300 ze=-68.895<-16593 Statuses=0009 0009 03:33:14 Msec=0 True Az=64.5 Ze=-68.895 Az status=0009 Ze status=0009 03:33:14 Check angles 03:33:14 SkyScan query 03:33:14 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.835<-17989 Statuses=0009 0009 03:33:14 Msec=750 True Az=81.855 Ze=-89.835 Az status=0009 Ze status=0009 03:33:14 Check angles 03:33:14 SkyScan query 03:33:15 SkyScan query done: ret=0 az=99.615<-6641 ze=-110.805<-19387 Statuses=0009 0009 03:33:15 Msec=1500 True Az=99.615 Ze=-110.805 Az status=0009 Ze status=0009 03:33:15 Check angles 03:33:15 SkyScan query 03:33:16 SkyScan query done: ret=0 az=117<-7800 ze=-131.73<-20782 Statuses=0009 0009 03:33:16 Msec=2250 True Az=117 Ze=-131.73 Az status=0009 Ze status=0009 03:33:16 Check angles 03:33:16 SkyScan query 03:33:17 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 03:33:17 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 03:33:17 Check angles 03:33:17 SkyScan query 03:33:17 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:33:17 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:33:17 Message to Master queued w/err=0: serial=260981 error=0 03:33:22 Received message from Master: op=Filter serial=260982 03:33:22 Color wheel filter change from 0 to 0 03:33:22 FLIGetFilterPos err=0 currentPosition=0 03:33:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:22 Filter is already there-color wheel unchanged 03:33:22 Received message from Master: op=Shutter serial=260983 03:33:22 Shutter LASER close 03:33:22 Received message from Camera: op=State serial=260985 03:33:22 GetSingleValue result=40 Value=cccccccc 03:33:22 SkyScan query 03:33:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:33:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:23 Parameters OK 03:33:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:23 Set A/D data flow result=40 03:33:23 Set A/D channel type result=40 03:33:23 Set A/D encoding result=40 03:33:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:23 Set channel filter=0.000000e+000 result=40 03:33:23 Config A/D Result=40 03:33:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:23 Get A/D filter: -9.255963e+061 result=40 03:33:23 Get A/D value=-858993460 result=40 03:33:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:23 Parameters OK 03:33:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:23 Set A/D data flow result=40 03:33:23 Set A/D channel type result=40 03:33:23 Set A/D encoding result=40 03:33:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:23 Set channel filter=0.000000e+000 result=40 03:33:23 Config A/D Result=40 03:33:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:23 Get A/D filter: -9.255963e+061 result=40 03:33:23 Get A/D value=-858993460 result=40 03:33:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:23 Aux= 03:33:23 Message to Camera, serial 260985 queued 03:34:00 Received message from Master: op=PointingHead serial=260998 03:34:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:34:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:34:00 Point started: ret=0 03:34:00 point_skyscan result=0 03:34:01 Check angles 03:34:01 SkyScan query 03:34:02 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.42<-23428 Statuses=0009 0009 03:34:02 Msec=0 True Az=113.01 Ze=-171.42 Az status=0009 Ze status=0009 03:34:02 Check angles 03:34:02 SkyScan query 03:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:34:02 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:34:02 Message to Master queued w/err=0: serial=260998 error=0 03:34:07 Received message from Master: op=Filter serial=260999 03:34:07 Color wheel filter change from 0 to 0 03:34:07 FLIGetFilterPos err=0 currentPosition=0 03:34:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:07 Filter is already there-color wheel unchanged 03:34:08 Received message from Master: op=Shutter serial=261000 03:34:08 Shutter LASER open 03:34:08 Received message from Camera: op=State serial=261002 03:34:08 GetSingleValue result=40 Value=cccccccc 03:34:08 SkyScan query 03:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:34:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:08 Parameters OK 03:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:08 Set A/D data flow result=40 03:34:08 Set A/D channel type result=40 03:34:08 Set A/D encoding result=40 03:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:08 Set channel filter=0.000000e+000 result=40 03:34:08 Config A/D Result=40 03:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:08 Get A/D filter: -9.255963e+061 result=40 03:34:08 Get A/D value=-858993460 result=40 03:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:08 Parameters OK 03:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:08 Set A/D data flow result=40 03:34:08 Set A/D channel type result=40 03:34:08 Set A/D encoding result=40 03:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:08 Set channel filter=0.000000e+000 result=40 03:34:08 Config A/D Result=40 03:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:08 Get A/D filter: -9.255963e+061 result=40 03:34:08 Get A/D value=-858993460 result=40 03:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:08 Aux= 03:34:08 Message to Camera, serial 261002 queued 03:34:17 Received message from Master: op=Shutter serial=261012 03:34:17 Shutter LASER close 03:34:17 Received message from Master: op=PointingHead serial=261016 03:34:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:34:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:34:18 Point started: ret=0 03:34:18 point_skyscan result=0 03:34:18 Check angles 03:34:18 SkyScan query 03:34:19 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.905<-21527 Statuses=0009 0009 03:34:19 Msec=0 True Az=136.185 Ze=-142.905 Az status=0009 Ze status=0009 03:34:19 Check angles 03:34:19 SkyScan query 03:34:20 SkyScan query done: ret=0 az=154.125<-10275 ze=-121.545<-20103 Statuses=0009 0009 03:34:20 Msec=750 True Az=154.125 Ze=-121.545 Az status=0009 Ze status=0009 03:34:20 Check angles 03:34:20 SkyScan query 03:34:20 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.5<-18700 Statuses=0009 0009 03:34:20 Msec=1500 True Az=171.525 Ze=-100.5 Az status=0009 Ze status=0009 03:34:21 Check angles 03:34:21 SkyScan query 03:34:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.59<-17306 Statuses=0008 0009 03:34:21 Msec=2250 True Az=176.01 Ze=-79.59 Az status=0008 Ze status=0009 03:34:21 Check angles 03:34:21 SkyScan query 03:34:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.155<-15877 Statuses=0008 0009 03:34:22 Msec=3000 True Az=176.01 Ze=-58.155 Az status=0008 Ze status=0009 03:34:22 Check angles 03:34:22 SkyScan query 03:34:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:34:23 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:34:23 Message to Master queued w/err=0: serial=261016 error=0 03:34:28 Received message from Master: op=Filter serial=261017 03:34:28 Color wheel filter change from 0 to 0 03:34:28 FLIGetFilterPos err=0 currentPosition=0 03:34:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:28 Filter is already there-color wheel unchanged 03:34:28 Received message from Master: op=Shutter serial=261018 03:34:28 Shutter LASER close 03:34:28 Received message from Camera: op=State serial=261020 03:34:28 GetSingleValue result=40 Value=cccccccc 03:34:28 SkyScan query 03:34:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:34:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:29 Parameters OK 03:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:29 Set A/D data flow result=40 03:34:29 Set A/D channel type result=40 03:34:29 Set A/D encoding result=40 03:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:29 Set channel filter=0.000000e+000 result=40 03:34:29 Config A/D Result=40 03:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:29 Get A/D filter: -9.255963e+061 result=40 03:34:29 Get A/D value=-858993460 result=40 03:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:29 Parameters OK 03:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:29 Set A/D data flow result=40 03:34:29 Set A/D channel type result=40 03:34:29 Set A/D encoding result=40 03:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:29 Set channel filter=0.000000e+000 result=40 03:34:29 Config A/D Result=40 03:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:29 Get A/D filter: -9.255963e+061 result=40 03:34:29 Get A/D value=-858993460 result=40 03:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:29 Aux= 03:34:29 Message to Camera, serial 261020 queued 03:35:06 Received message from Master: op=PointingHead serial=261033 03:35:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:35:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:35:06 Point started: ret=0 03:35:06 point_skyscan result=0 03:35:07 Check angles 03:35:07 SkyScan query 03:35:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.765<-13451 Statuses=0008 0009 03:35:07 Msec=0 True Az=175.995 Ze=-21.765 Az status=0008 Ze status=0009 03:35:08 Check angles 03:35:08 SkyScan query 03:35:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.33<-12022 Statuses=0008 0009 03:35:08 Msec=750 True Az=175.995 Ze=-0.33 Az status=0008 Ze status=0009 03:35:08 Check angles 03:35:08 SkyScan query 03:35:09 SkyScan query done: ret=0 az=175.995<-11733 ze=20.625<-10625 Statuses=0008 0009 03:35:09 Msec=1500 True Az=175.995 Ze=20.625 Az status=0008 Ze status=0009 03:35:09 Check angles 03:35:09 SkyScan query 03:35:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.595<-9427 Statuses=0008 0009 03:35:10 Msec=2250 True Az=175.995 Ze=38.595 Az status=0008 Ze status=0009 03:35:10 Check angles 03:35:10 SkyScan query 03:35:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 03:35:10 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 03:35:10 Message to Master queued w/err=0: serial=261033 error=0 03:35:15 Received message from Master: op=Filter serial=261034 03:35:15 Color wheel filter change from 0 to 0 03:35:15 FLIGetFilterPos err=0 currentPosition=0 03:35:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:15 Filter is already there-color wheel unchanged 03:35:16 Received message from Master: op=Shutter serial=261035 03:35:16 Shutter LASER close 03:35:16 Received message from Camera: op=State serial=261037 03:35:16 GetSingleValue result=40 Value=cccccccc 03:35:16 SkyScan query 03:35:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:35:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:16 Parameters OK 03:35:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:16 Set A/D data flow result=40 03:35:16 Set A/D channel type result=40 03:35:16 Set A/D encoding result=40 03:35:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:16 Set channel filter=0.000000e+000 result=40 03:35:16 Config A/D Result=40 03:35:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:16 Get A/D filter: -9.255963e+061 result=40 03:35:16 Get A/D value=-858993460 result=40 03:35:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:16 Parameters OK 03:35:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:16 Set A/D data flow result=40 03:35:16 Set A/D channel type result=40 03:35:16 Set A/D encoding result=40 03:35:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:16 Set channel filter=0.000000e+000 result=40 03:35:16 Config A/D Result=40 03:35:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:16 Get A/D filter: -9.255963e+061 result=40 03:35:16 Get A/D value=-858993460 result=40 03:35:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:16 Aux= 03:35:16 Message to Camera, serial 261037 queued [UTC 2018-12-19 03:35:52] 03:35:53 Received message from Master: op=PointingHead serial=261050 03:35:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:35:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:35:53 Point started: ret=0 03:35:53 point_skyscan result=0 03:35:54 Check angles 03:35:54 SkyScan query 03:35:55 SkyScan query done: ret=0 az=152.64<-10176 ze=8.22<-11452 Statuses=0009 0009 03:35:55 Msec=0 True Az=152.64 Ze=8.22 Az status=0009 Ze status=0009 03:35:55 Check angles 03:35:55 SkyScan query 03:35:55 SkyScan query done: ret=0 az=134.76<-8984 ze=-13.14<-12876 Statuses=0009 0009 03:35:55 Msec=750 True Az=134.76 Ze=-13.14 Az status=0009 Ze status=0009 03:35:56 Check angles 03:35:56 SkyScan query 03:35:56 SkyScan query done: ret=0 az=117.315<-7821 ze=-34.125<-14275 Statuses=0009 0009 03:35:56 Msec=1500 True Az=117.315 Ze=-34.125 Az status=0009 Ze status=0009 03:35:56 Check angles 03:35:56 SkyScan query 03:35:57 SkyScan query done: ret=0 az=99.795<-6653 ze=-51.57<-15438 Statuses=0009 0009 03:35:57 Msec=2250 True Az=99.795 Ze=-51.57 Az status=0009 Ze status=0009 03:35:57 Check angles 03:35:57 SkyScan query 03:35:58 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 03:35:58 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 03:35:58 Check angles 03:35:58 SkyScan query 03:35:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:35:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:35:58 Message to Master queued w/err=0: serial=261050 error=0 03:36:03 Received message from Master: op=Filter serial=261051 03:36:03 Color wheel filter change from 0 to 0 03:36:03 FLIGetFilterPos err=0 currentPosition=0 03:36:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:03 Filter is already there-color wheel unchanged 03:36:04 Received message from Master: op=Shutter serial=261052 03:36:04 Shutter LASER close 03:36:04 Received message from Camera: op=State serial=261054 03:36:04 GetSingleValue result=40 Value=cccccccc 03:36:04 SkyScan query 03:36:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:36:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:04 Parameters OK 03:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:04 Set A/D data flow result=40 03:36:04 Set A/D channel type result=40 03:36:04 Set A/D encoding result=40 03:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:04 Set channel filter=0.000000e+000 result=40 03:36:04 Config A/D Result=40 03:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:04 Get A/D filter: -9.255963e+061 result=40 03:36:04 Get A/D value=-858993460 result=40 03:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:04 Parameters OK 03:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:04 Set A/D data flow result=40 03:36:04 Set A/D channel type result=40 03:36:04 Set A/D encoding result=40 03:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:04 Set channel filter=0.000000e+000 result=40 03:36:04 Config A/D Result=40 03:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:04 Get A/D filter: -9.255963e+061 result=40 03:36:04 Get A/D value=-858993460 result=40 03:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:04 Aux= 03:36:04 Message to Camera, serial 261054 queued 03:36:41 Received message from Master: op=PointingHead serial=261067 03:36:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:36:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:36:41 Point started: ret=0 03:36:41 point_skyscan result=0 03:36:42 Check angles 03:36:42 SkyScan query 03:36:43 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.105<-17407 Statuses=0009 0009 03:36:43 Msec=0 True Az=108.84 Ze=-81.105 Az status=0009 Ze status=0009 03:36:43 Check angles 03:36:43 SkyScan query 03:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 03:36:44 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 03:36:44 Check angles 03:36:44 SkyScan query 03:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.045<-20203 Statuses=0008 0009 03:36:44 Msec=1500 True Az=112.995 Ze=-123.045 Az status=0008 Ze status=0009 03:36:44 Check angles 03:36:44 SkyScan query 03:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 03:36:45 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 03:36:45 Check angles 03:36:45 SkyScan query 03:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.94<-22996 Statuses=0008 0009 03:36:46 Msec=3000 True Az=112.995 Ze=-164.94 Az status=0008 Ze status=0009 03:36:46 Check angles 03:36:46 SkyScan query 03:36:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:36:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:36:47 Message to Master queued w/err=0: serial=261067 error=0 03:36:52 Received message from Master: op=Filter serial=261068 03:36:52 Color wheel filter change from 0 to 0 03:36:52 FLIGetFilterPos err=0 currentPosition=0 03:36:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:52 Filter is already there-color wheel unchanged 03:36:52 Received message from Master: op=Shutter serial=261069 03:36:52 Shutter LASER open 03:36:52 Received message from Camera: op=State serial=261071 03:36:52 GetSingleValue result=40 Value=cccccccc 03:36:52 SkyScan query 03:36:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:36:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:52 Parameters OK 03:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:52 Set A/D data flow result=40 03:36:52 Set A/D channel type result=40 03:36:52 Set A/D encoding result=40 03:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:52 Set channel filter=0.000000e+000 result=40 03:36:52 Config A/D Result=40 03:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:52 Get A/D filter: -9.255963e+061 result=40 03:36:52 Get A/D value=-858993460 result=40 03:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:52 Parameters OK 03:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:52 Set A/D data flow result=40 03:36:52 Set A/D channel type result=40 03:36:52 Set A/D encoding result=40 03:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:52 Set channel filter=0.000000e+000 result=40 03:36:52 Config A/D Result=40 03:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:52 Get A/D filter: -9.255963e+061 result=40 03:36:52 Get A/D value=-858993460 result=40 03:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:52 Aux= 03:36:52 Message to Camera, serial 261071 queued 03:37:01 Received message from Master: op=Shutter serial=261081 03:37:01 Shutter LASER close 03:37:01 Received message from Master: op=PointingHead serial=261085 03:37:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:37:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:37:02 Point started: ret=0 03:37:02 point_skyscan result=0 03:37:02 Check angles 03:37:02 SkyScan query 03:37:03 SkyScan query done: ret=0 az=90.09<-6006 ze=157.32<-1512 Statuses=0009 0009 03:37:03 Msec=0 True Az=90.09 Ze=157.32 Az status=0009 Ze status=0009 03:37:03 Check angles 03:37:03 SkyScan query 03:37:04 SkyScan query done: ret=0 az=72.24<-4816 ze=136.005<-2933 Statuses=0009 0009 03:37:04 Msec=750 True Az=72.24 Ze=136.005 Az status=0009 Ze status=0009 03:37:04 Check angles 03:37:04 SkyScan query 03:37:05 SkyScan query done: ret=0 az=54.765<-3651 ze=115.02<-4332 Statuses=0009 0009 03:37:05 Msec=1500 True Az=54.765 Ze=115.02 Az status=0009 Ze status=0009 03:37:05 Check angles 03:37:05 SkyScan query 03:37:05 SkyScan query done: ret=0 az=41.01<-2734 ze=94.065<-5729 Statuses=0009 0009 03:37:05 Msec=2250 True Az=41.01 Ze=94.065 Az status=0009 Ze status=0009 03:37:05 Check angles 03:37:05 SkyScan query 03:37:06 SkyScan query done: ret=0 az=40.995<-2733 ze=73.065<-7129 Statuses=0008 0009 03:37:06 Msec=3000 True Az=40.995 Ze=73.065 Az status=0008 Ze status=0009 03:37:06 Check angles 03:37:06 SkyScan query 03:37:07 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 03:37:07 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 03:37:07 Check angles 03:37:07 SkyScan query 03:37:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:37:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:37:08 Message to Master queued w/err=0: serial=261085 error=0 03:37:13 Received message from Master: op=Filter serial=261086 03:37:13 Color wheel filter change from 0 to 0 03:37:13 FLIGetFilterPos err=0 currentPosition=0 03:37:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:13 Filter is already there-color wheel unchanged 03:37:13 Received message from Master: op=Shutter serial=261087 03:37:13 Shutter LASER close 03:37:13 Received message from Camera: op=State serial=261089 03:37:13 GetSingleValue result=40 Value=cccccccc 03:37:13 SkyScan query 03:37:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:37:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:13 Parameters OK 03:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:13 Set A/D data flow result=40 03:37:13 Set A/D channel type result=40 03:37:13 Set A/D encoding result=40 03:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:13 Set channel filter=0.000000e+000 result=40 03:37:13 Config A/D Result=40 03:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:13 Get A/D filter: -9.255963e+061 result=40 03:37:13 Get A/D value=-858993460 result=40 03:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:13 Parameters OK 03:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:13 Set A/D data flow result=40 03:37:13 Set A/D channel type result=40 03:37:13 Set A/D encoding result=40 03:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:13 Set channel filter=0.000000e+000 result=40 03:37:13 Config A/D Result=40 03:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:13 Get A/D filter: -9.255963e+061 result=40 03:37:13 Get A/D value=-858993460 result=40 03:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:13 Aux= 03:37:13 Message to Camera, serial 261089 queued 03:37:50 Received message from Master: op=PointingHead serial=261102 03:37:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:37:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:37:51 Point started: ret=0 03:37:51 point_skyscan result=0 03:37:52 Check angles 03:37:52 SkyScan query 03:37:52 SkyScan query done: ret=0 az=40.995<-2733 ze=21.51<-10566 Statuses=0008 0009 03:37:52 Msec=0 True Az=40.995 Ze=21.51 Az status=0008 Ze status=0009 03:37:52 Check angles 03:37:52 SkyScan query 03:37:53 SkyScan query done: ret=0 az=40.995<-2733 ze=0.525<-11965 Statuses=0008 0009 03:37:53 Msec=750 True Az=40.995 Ze=0.525 Az status=0008 Ze status=0009 03:37:53 Check angles 03:37:53 SkyScan query 03:37:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.415<-13361 Statuses=0008 0009 03:37:54 Msec=1500 True Az=40.995 Ze=-20.415 Az status=0008 Ze status=0009 03:37:54 Check angles 03:37:54 SkyScan query 03:37:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 03:37:54 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 03:37:55 Check angles 03:37:55 SkyScan query 03:37:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:37:55 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:37:55 Message to Master queued w/err=0: serial=261102 error=0 03:38:00 Received message from Master: op=Filter serial=261103 03:38:00 Color wheel filter change from 0 to 0 03:38:00 FLIGetFilterPos err=0 currentPosition=0 03:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:00 Filter is already there-color wheel unchanged 03:38:00 Received message from Master: op=Shutter serial=261104 03:38:00 Shutter LASER close 03:38:00 Received message from Camera: op=State serial=261106 03:38:00 GetSingleValue result=40 Value=cccccccc 03:38:00 SkyScan query 03:38:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:01 Parameters OK 03:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:01 Set A/D data flow result=40 03:38:01 Set A/D channel type result=40 03:38:01 Set A/D encoding result=40 03:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:01 Set channel filter=0.000000e+000 result=40 03:38:01 Config A/D Result=40 03:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:01 Get A/D filter: -9.255963e+061 result=40 03:38:01 Get A/D value=-858993460 result=40 03:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:01 Parameters OK 03:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:01 Set A/D data flow result=40 03:38:01 Set A/D channel type result=40 03:38:01 Set A/D encoding result=40 03:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:01 Set channel filter=0.000000e+000 result=40 03:38:01 Config A/D Result=40 03:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:01 Get A/D filter: -9.255963e+061 result=40 03:38:01 Get A/D value=-858993460 result=40 03:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:01 Aux= 03:38:01 Message to Camera, serial 261106 queued 03:38:38 Received message from Master: op=PointingHead serial=261119 03:38:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:38:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:38:38 Point started: ret=0 03:38:38 point_skyscan result=0 03:38:39 Check angles 03:38:39 SkyScan query 03:38:39 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.16<-16544 Statuses=0009 0009 03:38:39 Msec=0 True Az=63.885 Ze=-68.16 Az status=0009 Ze status=0009 03:38:40 Check angles 03:38:40 SkyScan query 03:38:40 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.595<-17973 Statuses=0009 0009 03:38:40 Msec=750 True Az=81.555 Ze=-89.595 Az status=0009 Ze status=0009 03:38:40 Check angles 03:38:40 SkyScan query 03:38:41 SkyScan query done: ret=0 az=99.66<-6644 ze=-110.97<-19398 Statuses=0009 0009 03:38:41 Msec=1500 True Az=99.66 Ze=-110.97 Az status=0009 Ze status=0009 03:38:41 Check angles 03:38:41 SkyScan query 03:38:42 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.895<-20793 Statuses=0009 0009 03:38:42 Msec=2250 True Az=117.09 Ze=-131.895 Az status=0009 Ze status=0009 03:38:42 Check angles 03:38:42 SkyScan query 03:38:42 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 03:38:42 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 03:38:43 Check angles 03:38:43 SkyScan query 03:38:43 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:38:43 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:38:43 Message to Master queued w/err=0: serial=261119 error=0 03:38:48 Received message from Master: op=Filter serial=261120 03:38:48 Color wheel filter change from 0 to 0 03:38:48 FLIGetFilterPos err=0 currentPosition=0 03:38:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:48 Filter is already there-color wheel unchanged 03:38:48 Received message from Master: op=Shutter serial=261121 03:38:48 Shutter LASER close 03:38:48 Received message from Camera: op=State serial=261123 03:38:48 GetSingleValue result=40 Value=cccccccc 03:38:48 SkyScan query 03:38:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:38:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:49 Parameters OK 03:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:49 Set A/D data flow result=40 03:38:49 Set A/D channel type result=40 03:38:49 Set A/D encoding result=40 03:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:49 Set channel filter=0.000000e+000 result=40 03:38:49 Config A/D Result=40 03:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:49 Get A/D filter: -9.255963e+061 result=40 03:38:49 Get A/D value=-858993460 result=40 03:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:49 Parameters OK 03:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:49 Set A/D data flow result=40 03:38:49 Set A/D channel type result=40 03:38:49 Set A/D encoding result=40 03:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:49 Set channel filter=0.000000e+000 result=40 03:38:49 Config A/D Result=40 03:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:49 Get A/D filter: -9.255963e+061 result=40 03:38:49 Get A/D value=-858993460 result=40 03:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:49 Aux= 03:38:49 Message to Camera, serial 261123 queued 03:39:26 Received message from Master: op=PointingHead serial=261136 03:39:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:39:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:39:26 Point started: ret=0 03:39:26 point_skyscan result=0 03:39:27 Check angles 03:39:27 SkyScan query 03:39:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 03:39:28 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 03:39:28 Check angles 03:39:28 SkyScan query 03:39:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:39:28 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:39:28 Message to Master queued w/err=0: serial=261136 error=0 03:39:33 Received message from Master: op=Filter serial=261137 03:39:33 Color wheel filter change from 0 to 0 03:39:33 FLIGetFilterPos err=0 currentPosition=0 03:39:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:33 Filter is already there-color wheel unchanged 03:39:34 Received message from Master: op=Shutter serial=261138 03:39:34 Shutter LASER open 03:39:34 Received message from Camera: op=State serial=261140 03:39:34 GetSingleValue result=40 Value=cccccccc 03:39:34 SkyScan query 03:39:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:39:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:34 Parameters OK 03:39:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:34 Set A/D data flow result=40 03:39:34 Set A/D channel type result=40 03:39:34 Set A/D encoding result=40 03:39:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:34 Set channel filter=0.000000e+000 result=40 03:39:34 Config A/D Result=40 03:39:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:34 Get A/D filter: -9.255963e+061 result=40 03:39:34 Get A/D value=-858993460 result=40 03:39:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:34 Parameters OK 03:39:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:34 Set A/D data flow result=40 03:39:34 Set A/D channel type result=40 03:39:34 Set A/D encoding result=40 03:39:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:34 Set channel filter=0.000000e+000 result=40 03:39:34 Config A/D Result=40 03:39:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:34 Get A/D filter: -9.255963e+061 result=40 03:39:34 Get A/D value=-858993460 result=40 03:39:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:34 Aux= 03:39:34 Message to Camera, serial 261140 queued 03:39:43 Received message from Master: op=Shutter serial=261150 03:39:43 Shutter LASER close 03:39:43 Received message from Master: op=PointingHead serial=261154 03:39:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:39:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:39:44 Point started: ret=0 03:39:44 point_skyscan result=0 03:39:44 Check angles 03:39:44 SkyScan query 03:39:45 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.22<-21548 Statuses=0009 0009 03:39:45 Msec=0 True Az=135.975 Ze=-143.22 Az status=0009 Ze status=0009 03:39:45 Check angles 03:39:45 SkyScan query 03:39:46 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.235<-20149 Statuses=0009 0009 03:39:46 Msec=750 True Az=153.435 Ze=-122.235 Az status=0009 Ze status=0009 03:39:46 Check angles 03:39:46 SkyScan query 03:39:46 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.8<-18720 Statuses=0009 0009 03:39:46 Msec=1500 True Az=171.36 Ze=-100.8 Az status=0009 Ze status=0009 03:39:47 Check angles 03:39:47 SkyScan query 03:39:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 03:39:47 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 03:39:47 Check angles 03:39:47 SkyScan query 03:39:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.485<-15899 Statuses=0008 0009 03:39:48 Msec=3000 True Az=176.01 Ze=-58.485 Az status=0008 Ze status=0009 03:39:48 Check angles 03:39:48 SkyScan query 03:39:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 03:39:49 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 03:39:49 Message to Master queued w/err=0: serial=261154 error=0 03:39:54 Received message from Master: op=Filter serial=261155 03:39:54 Color wheel filter change from 0 to 0 03:39:54 FLIGetFilterPos err=0 currentPosition=0 03:39:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:54 Filter is already there-color wheel unchanged 03:39:54 Received message from Master: op=Shutter serial=261156 03:39:54 Shutter LASER close 03:39:54 Received message from Camera: op=State serial=261158 03:39:54 GetSingleValue result=40 Value=cccccccc 03:39:54 SkyScan query 03:39:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:39:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:55 Parameters OK 03:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:55 Set A/D data flow result=40 03:39:55 Set A/D channel type result=40 03:39:55 Set A/D encoding result=40 03:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:55 Set channel filter=0.000000e+000 result=40 03:39:55 Config A/D Result=40 03:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:55 Get A/D filter: -9.255963e+061 result=40 03:39:55 Get A/D value=-858993460 result=40 03:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:55 Parameters OK 03:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:55 Set A/D data flow result=40 03:39:55 Set A/D channel type result=40 03:39:55 Set A/D encoding result=40 03:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:55 Set channel filter=0.000000e+000 result=40 03:39:55 Config A/D Result=40 03:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:55 Get A/D filter: -9.255963e+061 result=40 03:39:55 Get A/D value=-858993460 result=40 03:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:55 Aux= 03:39:55 Message to Camera, serial 261158 queued 03:40:32 Received message from Master: op=PointingHead serial=261171 03:40:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:40:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:40:32 Point started: ret=0 03:40:32 point_skyscan result=0 03:40:33 Check angles 03:40:33 SkyScan query 03:40:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-21.99<-13466 Statuses=0008 0009 03:40:33 Msec=0 True Az=175.995 Ze=-21.99 Az status=0008 Ze status=0009 03:40:33 Check angles 03:40:33 SkyScan query 03:40:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-0.87<-12058 Statuses=0008 0009 03:40:34 Msec=750 True Az=175.995 Ze=-0.87 Az status=0008 Ze status=0009 03:40:34 Check angles 03:40:34 SkyScan query 03:40:35 SkyScan query done: ret=0 az=175.995<-11733 ze=19.92<-10672 Statuses=0008 0009 03:40:35 Msec=1500 True Az=175.995 Ze=19.92 Az status=0008 Ze status=0009 03:40:35 Check angles 03:40:35 SkyScan query 03:40:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.52<-9432 Statuses=0008 0009 03:40:36 Msec=2250 True Az=175.995 Ze=38.52 Az status=0008 Ze status=0009 03:40:36 Check angles 03:40:36 SkyScan query 03:40:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.535<-9431 Statuses=0008 0008 03:40:36 Msec=3000 True Az=175.995 Ze=38.535 Az status=0008 Ze status=0008 03:40:36 Message to Master queued w/err=0: serial=261171 error=0 03:40:41 Received message from Master: op=Filter serial=261172 03:40:41 Color wheel filter change from 0 to 0 03:40:41 FLIGetFilterPos err=0 currentPosition=0 03:40:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:41 Filter is already there-color wheel unchanged 03:40:41 Received message from Master: op=Shutter serial=261173 03:40:41 Shutter LASER close 03:40:41 Received message from Camera: op=State serial=261175 03:40:41 GetSingleValue result=40 Value=cccccccc 03:40:41 SkyScan query 03:40:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:40:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:42 Parameters OK 03:40:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:42 Set A/D data flow result=40 03:40:42 Set A/D channel type result=40 03:40:42 Set A/D encoding result=40 03:40:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:42 Set channel filter=0.000000e+000 result=40 03:40:42 Config A/D Result=40 03:40:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:42 Get A/D filter: -9.255963e+061 result=40 03:40:42 Get A/D value=-858993460 result=40 03:40:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:42 Parameters OK 03:40:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:42 Set A/D data flow result=40 03:40:42 Set A/D channel type result=40 03:40:42 Set A/D encoding result=40 03:40:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:42 Set channel filter=0.000000e+000 result=40 03:40:42 Config A/D Result=40 03:40:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:42 Get A/D filter: -9.255963e+061 result=40 03:40:42 Get A/D value=-858993460 result=40 03:40:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:42 Aux= 03:40:42 Message to Camera, serial 261175 queued 03:41:19 Received message from Master: op=PointingHead serial=261188 03:41:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:41:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:41:19 Point started: ret=0 03:41:19 point_skyscan result=0 03:41:20 Check angles 03:41:20 SkyScan query 03:41:21 SkyScan query done: ret=0 az=152.76<-10184 ze=8.235<-11451 Statuses=0009 0009 03:41:21 Msec=0 True Az=152.76 Ze=8.235 Az status=0009 Ze status=0009 03:41:21 Check angles 03:41:21 SkyScan query 03:41:21 SkyScan query done: ret=0 az=134.835<-8989 ze=-13.11<-12874 Statuses=0009 0009 03:41:21 Msec=750 True Az=134.835 Ze=-13.11 Az status=0009 Ze status=0009 03:41:22 Check angles 03:41:22 SkyScan query 03:41:22 SkyScan query done: ret=0 az=117.435<-7829 ze=-34.095<-14273 Statuses=0009 0009 03:41:22 Msec=1500 True Az=117.435 Ze=-34.095 Az status=0009 Ze status=0009 03:41:22 Check angles 03:41:22 SkyScan query 03:41:23 SkyScan query done: ret=0 az=99.6<-6640 ze=-51.57<-15438 Statuses=0009 0009 03:41:23 Msec=2250 True Az=99.6 Ze=-51.57 Az status=0009 Ze status=0009 03:41:23 Check angles 03:41:23 SkyScan query 03:41:24 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:41:24 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:41:24 Check angles 03:41:24 SkyScan query 03:41:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:41:24 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:41:24 Message to Master queued w/err=0: serial=261188 error=0 03:41:29 Received message from Master: op=Filter serial=261189 03:41:29 Color wheel filter change from 0 to 0 03:41:29 FLIGetFilterPos err=0 currentPosition=0 03:41:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:29 Filter is already there-color wheel unchanged 03:41:30 Received message from Master: op=Shutter serial=261190 03:41:30 Shutter LASER close 03:41:30 Received message from Camera: op=State serial=261192 03:41:30 GetSingleValue result=40 Value=cccccccc 03:41:30 SkyScan query 03:41:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:41:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:30 Parameters OK 03:41:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:30 Set A/D data flow result=40 03:41:30 Set A/D channel type result=40 03:41:30 Set A/D encoding result=40 03:41:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:30 Set channel filter=0.000000e+000 result=40 03:41:30 Config A/D Result=40 03:41:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:30 Get A/D filter: -9.255963e+061 result=40 03:41:30 Get A/D value=-858993460 result=40 03:41:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:30 Parameters OK 03:41:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:30 Set A/D data flow result=40 03:41:30 Set A/D channel type result=40 03:41:30 Set A/D encoding result=40 03:41:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:30 Set channel filter=0.000000e+000 result=40 03:41:30 Config A/D Result=40 03:41:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:30 Get A/D filter: -9.255963e+061 result=40 03:41:30 Get A/D value=-858993460 result=40 03:41:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:30 Aux= 03:41:30 Message to Camera, serial 261192 queued 03:42:07 Received message from Master: op=PointingHead serial=261205 03:42:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:42:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:42:07 Point started: ret=0 03:42:07 point_skyscan result=0 03:42:08 Check angles 03:42:08 SkyScan query 03:42:09 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.15<-17410 Statuses=0009 0009 03:42:09 Msec=0 True Az=108.915 Ze=-81.15 Az status=0009 Ze status=0009 03:42:09 Check angles 03:42:09 SkyScan query 03:42:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 03:42:10 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 03:42:10 Check angles 03:42:10 SkyScan query 03:42:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.51<-20234 Statuses=0008 0009 03:42:10 Msec=1500 True Az=112.995 Ze=-123.51 Az status=0008 Ze status=0009 03:42:10 Check angles 03:42:10 SkyScan query 03:42:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 03:42:11 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 03:42:11 Check angles 03:42:11 SkyScan query 03:42:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 03:42:12 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 03:42:12 Check angles 03:42:12 SkyScan query 03:42:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:42:13 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:42:13 Message to Master queued w/err=0: serial=261205 error=0 03:42:18 Received message from Master: op=Filter serial=261206 03:42:18 Color wheel filter change from 0 to 0 03:42:18 FLIGetFilterPos err=0 currentPosition=0 03:42:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:18 Filter is already there-color wheel unchanged 03:42:18 Received message from Master: op=Shutter serial=261207 03:42:18 Shutter LASER open 03:42:18 Received message from Camera: op=State serial=261209 03:42:18 GetSingleValue result=40 Value=cccccccc 03:42:18 SkyScan query 03:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:42:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:18 Parameters OK 03:42:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:18 Set A/D data flow result=40 03:42:18 Set A/D channel type result=40 03:42:18 Set A/D encoding result=40 03:42:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:18 Set channel filter=0.000000e+000 result=40 03:42:18 Config A/D Result=40 03:42:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:18 Get A/D filter: -9.255963e+061 result=40 03:42:18 Get A/D value=-858993460 result=40 03:42:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:18 Parameters OK 03:42:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:18 Set A/D data flow result=40 03:42:18 Set A/D channel type result=40 03:42:18 Set A/D encoding result=40 03:42:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:18 Set channel filter=0.000000e+000 result=40 03:42:18 Config A/D Result=40 03:42:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:18 Get A/D filter: -9.255963e+061 result=40 03:42:18 Get A/D value=-858993460 result=40 03:42:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:18 Aux= 03:42:18 Message to Camera, serial 261209 queued 03:42:27 Received message from Master: op=Shutter serial=261219 03:42:27 Shutter LASER close 03:42:27 Received message from Master: op=PointingHead serial=261223 03:42:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:42:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:42:28 Point started: ret=0 03:42:28 point_skyscan result=0 03:42:28 Check angles 03:42:28 SkyScan query 03:42:29 SkyScan query done: ret=0 az=90.075<-6005 ze=157.38<-1508 Statuses=0009 0009 03:42:29 Msec=0 True Az=90.075 Ze=157.38 Az status=0009 Ze status=0009 03:42:29 Check angles 03:42:29 SkyScan query 03:42:30 SkyScan query done: ret=0 az=72.57<-4838 ze=136.47<-2902 Statuses=0009 0009 03:42:30 Msec=750 True Az=72.57 Ze=136.47 Az status=0009 Ze status=0009 03:42:30 Check angles 03:42:30 SkyScan query 03:42:31 SkyScan query done: ret=0 az=55.17<-3678 ze=115.56<-4296 Statuses=0009 0009 03:42:31 Msec=1500 True Az=55.17 Ze=115.56 Az status=0009 Ze status=0009 03:42:31 Check angles 03:42:31 SkyScan query 03:42:31 SkyScan query done: ret=0 az=41.01<-2734 ze=94.56<-5696 Statuses=0009 0009 03:42:31 Msec=2250 True Az=41.01 Ze=94.56 Az status=0009 Ze status=0009 03:42:31 Check angles 03:42:31 SkyScan query 03:42:32 SkyScan query done: ret=0 az=40.995<-2733 ze=73.635<-7091 Statuses=0008 0009 03:42:32 Msec=3000 True Az=40.995 Ze=73.635 Az status=0008 Ze status=0009 03:42:32 Check angles 03:42:32 SkyScan query 03:42:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.965<-8469 Statuses=0008 0009 03:42:33 Msec=3750 True Az=40.995 Ze=52.965 Az status=0008 Ze status=0009 03:42:33 Check angles 03:42:33 SkyScan query 03:42:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:42:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:42:34 Message to Master queued w/err=0: serial=261223 error=0 03:42:39 Received message from Master: op=Filter serial=261224 03:42:39 Color wheel filter change from 0 to 0 03:42:39 FLIGetFilterPos err=0 currentPosition=0 03:42:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:39 Filter is already there-color wheel unchanged 03:42:39 Received message from Master: op=Shutter serial=261225 03:42:39 Shutter LASER close 03:42:39 Received message from Camera: op=State serial=261227 03:42:39 GetSingleValue result=40 Value=cccccccc 03:42:39 SkyScan query 03:42:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:42:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:39 Parameters OK 03:42:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:39 Set A/D data flow result=40 03:42:39 Set A/D channel type result=40 03:42:39 Set A/D encoding result=40 03:42:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:39 Set channel filter=0.000000e+000 result=40 03:42:39 Config A/D Result=40 03:42:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:39 Get A/D filter: -9.255963e+061 result=40 03:42:39 Get A/D value=-858993460 result=40 03:42:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:39 Parameters OK 03:42:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:39 Set A/D data flow result=40 03:42:39 Set A/D channel type result=40 03:42:39 Set A/D encoding result=40 03:42:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:39 Set channel filter=0.000000e+000 result=40 03:42:39 Config A/D Result=40 03:42:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:39 Get A/D filter: -9.255963e+061 result=40 03:42:39 Get A/D value=-858993460 result=40 03:42:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:39 Aux= 03:42:39 Message to Camera, serial 261227 queued 03:43:16 Received message from Master: op=PointingHead serial=261240 03:43:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:43:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:43:17 Point started: ret=0 03:43:17 point_skyscan result=0 03:43:17 Check angles 03:43:17 SkyScan query 03:43:18 SkyScan query done: ret=0 az=40.995<-2733 ze=21.795<-10547 Statuses=0008 0009 03:43:18 Msec=0 True Az=40.995 Ze=21.795 Az status=0008 Ze status=0009 03:43:18 Check angles 03:43:18 SkyScan query 03:43:19 SkyScan query done: ret=0 az=40.995<-2733 ze=0.885<-11941 Statuses=0008 0009 03:43:19 Msec=750 True Az=40.995 Ze=0.885 Az status=0008 Ze status=0009 03:43:19 Check angles 03:43:19 SkyScan query 03:43:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.49<-13366 Statuses=0008 0009 03:43:20 Msec=1500 True Az=40.995 Ze=-20.49 Az status=0008 Ze status=0009 03:43:20 Check angles 03:43:20 SkyScan query 03:43:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:43:20 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:43:20 Check angles 03:43:20 SkyScan query 03:43:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:43:21 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:43:21 Message to Master queued w/err=0: serial=261240 error=0 03:43:26 Received message from Master: op=Filter serial=261241 03:43:26 Color wheel filter change from 0 to 0 03:43:26 FLIGetFilterPos err=0 currentPosition=0 03:43:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:26 Filter is already there-color wheel unchanged 03:43:26 Received message from Master: op=Shutter serial=261242 03:43:26 Shutter LASER close 03:43:26 Received message from Camera: op=State serial=261244 03:43:26 GetSingleValue result=40 Value=cccccccc 03:43:26 SkyScan query 03:43:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:43:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:27 Parameters OK 03:43:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:27 Set A/D data flow result=40 03:43:27 Set A/D channel type result=40 03:43:27 Set A/D encoding result=40 03:43:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:27 Set channel filter=0.000000e+000 result=40 03:43:27 Config A/D Result=40 03:43:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:27 Get A/D filter: -9.255963e+061 result=40 03:43:27 Get A/D value=-858993460 result=40 03:43:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:27 Parameters OK 03:43:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:27 Set A/D data flow result=40 03:43:27 Set A/D channel type result=40 03:43:27 Set A/D encoding result=40 03:43:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:27 Set channel filter=0.000000e+000 result=40 03:43:27 Config A/D Result=40 03:43:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:27 Get A/D filter: -9.255963e+061 result=40 03:43:27 Get A/D value=-858993460 result=40 03:43:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:27 Aux= 03:43:27 Message to Camera, serial 261244 queued 03:44:04 Received message from Master: op=PointingHead serial=261257 03:44:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:44:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:44:04 Point started: ret=0 03:44:04 point_skyscan result=0 03:44:05 Check angles 03:44:05 SkyScan query 03:44:05 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.415<-16561 Statuses=0009 0009 03:44:05 Msec=0 True Az=64.425 Ze=-68.415 Az status=0009 Ze status=0009 03:44:06 Check angles 03:44:06 SkyScan query 03:44:06 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.43<-17962 Statuses=0009 0009 03:44:06 Msec=750 True Az=81.84 Ze=-89.43 Az status=0009 Ze status=0009 03:44:06 Check angles 03:44:06 SkyScan query 03:44:07 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.355<-19357 Statuses=0009 0009 03:44:07 Msec=1500 True Az=99.36 Ze=-110.355 Az status=0009 Ze status=0009 03:44:07 Check angles 03:44:07 SkyScan query 03:44:08 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.325<-20755 Statuses=0009 0009 03:44:08 Msec=2250 True Az=116.7 Ze=-131.325 Az status=0009 Ze status=0009 03:44:08 Check angles 03:44:08 SkyScan query 03:44:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 03:44:08 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 03:44:09 Check angles 03:44:09 SkyScan query 03:44:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 03:44:09 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 03:44:09 Message to Master queued w/err=0: serial=261257 error=0 03:44:14 Received message from Master: op=Filter serial=261258 03:44:14 Color wheel filter change from 0 to 0 03:44:14 FLIGetFilterPos err=0 currentPosition=0 03:44:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:14 Filter is already there-color wheel unchanged 03:44:14 Received message from Master: op=Shutter serial=261259 03:44:14 Shutter LASER close 03:44:14 Received message from Camera: op=State serial=261261 03:44:14 GetSingleValue result=40 Value=cccccccc 03:44:14 SkyScan query 03:44:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:44:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:15 Parameters OK 03:44:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:15 Set A/D data flow result=40 03:44:15 Set A/D channel type result=40 03:44:15 Set A/D encoding result=40 03:44:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:15 Set channel filter=0.000000e+000 result=40 03:44:15 Config A/D Result=40 03:44:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:15 Get A/D filter: -9.255963e+061 result=40 03:44:15 Get A/D value=-858993460 result=40 03:44:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:15 Parameters OK 03:44:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:15 Set A/D data flow result=40 03:44:15 Set A/D channel type result=40 03:44:15 Set A/D encoding result=40 03:44:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:15 Set channel filter=0.000000e+000 result=40 03:44:15 Config A/D Result=40 03:44:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:15 Get A/D filter: -9.255963e+061 result=40 03:44:15 Get A/D value=-858993460 result=40 03:44:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:15 Aux= 03:44:15 Message to Camera, serial 261261 queued 03:44:52 Received message from Master: op=PointingHead serial=261274 03:44:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:44:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:44:52 Point started: ret=0 03:44:52 point_skyscan result=0 03:44:53 Check angles 03:44:53 SkyScan query 03:44:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 03:44:53 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 03:44:54 Check angles 03:44:54 SkyScan query 03:44:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:44:54 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:44:54 Message to Master queued w/err=0: serial=261274 error=0 03:44:59 Received message from Master: op=Filter serial=261275 03:44:59 Color wheel filter change from 0 to 0 03:44:59 FLIGetFilterPos err=0 currentPosition=0 03:44:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:59 Filter is already there-color wheel unchanged 03:44:59 Received message from Master: op=Shutter serial=261276 03:44:59 Shutter LASER open 03:45:00 Received message from Camera: op=State serial=261278 03:45:00 GetSingleValue result=40 Value=cccccccc 03:45:00 SkyScan query 03:45:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:45:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:00 Parameters OK 03:45:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:00 Set A/D data flow result=40 03:45:00 Set A/D channel type result=40 03:45:00 Set A/D encoding result=40 03:45:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:00 Set channel filter=0.000000e+000 result=40 03:45:00 Config A/D Result=40 03:45:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:00 Get A/D filter: -9.255963e+061 result=40 03:45:00 Get A/D value=-858993460 result=40 03:45:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:00 Parameters OK 03:45:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:00 Set A/D data flow result=40 03:45:00 Set A/D channel type result=40 03:45:00 Set A/D encoding result=40 03:45:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:00 Set channel filter=0.000000e+000 result=40 03:45:00 Config A/D Result=40 03:45:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:00 Get A/D filter: -9.255963e+061 result=40 03:45:00 Get A/D value=-858993460 result=40 03:45:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:00 Aux= 03:45:00 Message to Camera, serial 261278 queued 03:45:09 Received message from Master: op=Shutter serial=261288 03:45:09 Shutter LASER close 03:45:09 Received message from Master: op=PointingHead serial=261292 03:45:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:45:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:45:10 Point started: ret=0 03:45:10 point_skyscan result=0 03:45:10 Check angles 03:45:10 SkyScan query 03:45:11 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.74<-21516 Statuses=0009 0009 03:45:11 Msec=0 True Az=136.41 Ze=-142.74 Az status=0009 Ze status=0009 03:45:11 Check angles 03:45:11 SkyScan query 03:45:12 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.8<-20120 Statuses=0009 0009 03:45:12 Msec=750 True Az=153.9 Ze=-121.8 Az status=0009 Ze status=0009 03:45:12 Check angles 03:45:12 SkyScan query 03:45:12 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.77<-18718 Statuses=0009 0009 03:45:12 Msec=1500 True Az=171.375 Ze=-100.77 Az status=0009 Ze status=0009 03:45:13 Check angles 03:45:13 SkyScan query 03:45:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.905<-17327 Statuses=0008 0009 03:45:13 Msec=2250 True Az=176.01 Ze=-79.905 Az status=0008 Ze status=0009 03:45:13 Check angles 03:45:13 SkyScan query 03:45:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.89<-15926 Statuses=0008 0009 03:45:14 Msec=3000 True Az=176.01 Ze=-58.89 Az status=0008 Ze status=0009 03:45:14 Check angles 03:45:14 SkyScan query 03:45:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:45:15 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:45:15 Message to Master queued w/err=0: serial=261292 error=0 03:45:20 Received message from Master: op=Filter serial=261293 03:45:20 Color wheel filter change from 0 to 0 03:45:20 FLIGetFilterPos err=0 currentPosition=0 [UTC 2018-12-19 03:45:20] 03:45:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:20 Filter is already there-color wheel unchanged 03:45:20 Received message from Master: op=Shutter serial=261294 03:45:20 Shutter LASER close 03:45:20 Received message from Camera: op=State serial=261296 03:45:20 GetSingleValue result=40 Value=cccccccc 03:45:20 SkyScan query 03:45:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:45:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:21 Parameters OK 03:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:21 Set A/D data flow result=40 03:45:21 Set A/D channel type result=40 03:45:21 Set A/D encoding result=40 03:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:21 Set channel filter=0.000000e+000 result=40 03:45:21 Config A/D Result=40 03:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:21 Get A/D filter: -9.255963e+061 result=40 03:45:21 Get A/D value=-858993460 result=40 03:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:21 Parameters OK 03:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:21 Set A/D data flow result=40 03:45:21 Set A/D channel type result=40 03:45:21 Set A/D encoding result=40 03:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:21 Set channel filter=0.000000e+000 result=40 03:45:21 Config A/D Result=40 03:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:21 Get A/D filter: -9.255963e+061 result=40 03:45:21 Get A/D value=-858993460 result=40 03:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:21 Aux= 03:45:21 Message to Camera, serial 261296 queued 03:45:27 Received message from Master: op=Identify serial=261297 03:45:57 Received message from Master: op=PointingHead serial=261312 03:45:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:45:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:45:58 Point started: ret=0 03:45:58 point_skyscan result=0 03:45:59 Check angles 03:45:59 SkyScan query 03:45:59 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.945<-13463 Statuses=0009 0009 03:45:59 Msec=0 True Az=153.12 Ze=-21.945 Az status=0009 Ze status=0009 03:45:59 Check angles 03:45:59 SkyScan query 03:46:00 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.93<-12062 Statuses=0009 0009 03:46:00 Msec=750 True Az=135.72 Ze=-0.93 Az status=0009 Ze status=0009 03:46:00 Check angles 03:46:00 SkyScan query 03:46:01 SkyScan query done: ret=0 az=118.14<-7876 ze=19.98<-10668 Statuses=0009 0009 03:46:01 Msec=1500 True Az=118.14 Ze=19.98 Az status=0009 Ze status=0009 03:46:01 Check angles 03:46:01 SkyScan query 03:46:01 SkyScan query done: ret=0 az=100.755<-6717 ze=40.98<-9268 Statuses=0009 0009 03:46:01 Msec=2250 True Az=100.755 Ze=40.98 Az status=0009 Ze status=0009 03:46:02 Check angles 03:46:02 SkyScan query 03:46:02 SkyScan query done: ret=0 az=85.965<-5731 ze=51.555<-8563 Statuses=0009 0008 03:46:02 Msec=3000 True Az=85.965 Ze=51.555 Az status=0009 Ze status=0008 03:46:02 Check angles 03:46:02 SkyScan query 03:46:03 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 03:46:03 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 03:46:03 Message to Master queued w/err=0: serial=261312 error=0 03:46:08 Received message from Master: op=Filter serial=261313 03:46:08 Color wheel filter change from 0 to 0 03:46:08 FLIGetFilterPos err=0 currentPosition=0 03:46:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:08 Filter is already there-color wheel unchanged 03:46:08 Received message from Master: op=Shutter serial=261314 03:46:08 Shutter LASER close 03:46:08 Received message from Camera: op=State serial=261316 03:46:08 GetSingleValue result=40 Value=cccccccc 03:46:08 SkyScan query 03:46:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:46:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:09 Parameters OK 03:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:09 Set A/D data flow result=40 03:46:09 Set A/D channel type result=40 03:46:09 Set A/D encoding result=40 03:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:09 Set channel filter=0.000000e+000 result=40 03:46:09 Config A/D Result=40 03:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:09 Get A/D filter: -9.255963e+061 result=40 03:46:09 Get A/D value=-858993460 result=40 03:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:09 Parameters OK 03:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:09 Set A/D data flow result=40 03:46:09 Set A/D channel type result=40 03:46:09 Set A/D encoding result=40 03:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:09 Set channel filter=0.000000e+000 result=40 03:46:09 Config A/D Result=40 03:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:09 Get A/D filter: -9.255963e+061 result=40 03:46:09 Get A/D value=-858993460 result=40 03:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:09 Aux= 03:46:09 Message to Camera, serial 261316 queued 03:46:45 Received message from Master: op=PointingHead serial=261329 03:46:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:46:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:46:46 Point started: ret=0 03:46:46 point_skyscan result=0 03:46:47 Check angles 03:46:47 SkyScan query 03:46:47 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 03:46:47 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 03:46:47 Check angles 03:46:47 SkyScan query 03:46:48 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 03:46:48 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 03:46:48 Check angles 03:46:48 SkyScan query 03:46:49 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 03:46:49 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 03:46:49 Check angles 03:46:49 SkyScan query 03:46:49 SkyScan query done: ret=0 az=161.64<-10776 ze=38.505<-9433 Statuses=0009 0008 03:46:49 Msec=2250 True Az=161.64 Ze=38.505 Az status=0009 Ze status=0008 03:46:50 Check angles 03:46:50 SkyScan query 03:46:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 03:46:50 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 03:46:50 Check angles 03:46:50 SkyScan query 03:46:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:46:51 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 03:46:51 Message to Master queued w/err=0: serial=261329 error=0 03:46:56 Received message from Master: op=Filter serial=261330 03:46:56 Color wheel filter change from 0 to 0 03:46:56 FLIGetFilterPos err=0 currentPosition=0 03:46:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:56 Filter is already there-color wheel unchanged 03:46:56 Received message from Master: op=Shutter serial=261331 03:46:56 Shutter LASER close 03:46:56 Received message from Camera: op=State serial=261333 03:46:56 GetSingleValue result=40 Value=cccccccc 03:46:56 SkyScan query 03:46:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:46:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:57 Parameters OK 03:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:57 Set A/D data flow result=40 03:46:57 Set A/D channel type result=40 03:46:57 Set A/D encoding result=40 03:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:57 Set channel filter=0.000000e+000 result=40 03:46:57 Config A/D Result=40 03:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:57 Get A/D filter: -9.255963e+061 result=40 03:46:57 Get A/D value=-858993460 result=40 03:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:57 Parameters OK 03:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:57 Set A/D data flow result=40 03:46:57 Set A/D channel type result=40 03:46:57 Set A/D encoding result=40 03:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:57 Set channel filter=0.000000e+000 result=40 03:46:57 Config A/D Result=40 03:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:57 Get A/D filter: -9.255963e+061 result=40 03:46:57 Get A/D value=-858993460 result=40 03:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:57 Aux= 03:46:57 Message to Camera, serial 261333 queued 03:47:34 Received message from Master: op=PointingHead serial=261346 03:47:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:47:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:47:34 Point started: ret=0 03:47:34 point_skyscan result=0 03:47:35 Check angles 03:47:35 SkyScan query 03:47:35 SkyScan query done: ret=0 az=152.73<-10182 ze=8.505<-11433 Statuses=0009 0009 03:47:35 Msec=0 True Az=152.73 Ze=8.505 Az status=0009 Ze status=0009 03:47:35 Check angles 03:47:35 SkyScan query 03:47:36 SkyScan query done: ret=0 az=134.91<-8994 ze=-12.87<-12858 Statuses=0009 0009 03:47:36 Msec=750 True Az=134.91 Ze=-12.87 Az status=0009 Ze status=0009 03:47:36 Check angles 03:47:36 SkyScan query 03:47:37 SkyScan query done: ret=0 az=117.42<-7828 ze=-33.885<-14259 Statuses=0009 0009 03:47:37 Msec=1500 True Az=117.42 Ze=-33.885 Az status=0009 Ze status=0009 03:47:37 Check angles 03:47:37 SkyScan query 03:47:37 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.57<-15438 Statuses=0009 0009 03:47:37 Msec=2250 True Az=100.05 Ze=-51.57 Az status=0009 Ze status=0009 03:47:38 Check angles 03:47:38 SkyScan query 03:47:38 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 03:47:38 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 03:47:38 Check angles 03:47:38 SkyScan query 03:47:39 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 03:47:39 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 03:47:39 Message to Master queued w/err=0: serial=261346 error=0 03:47:44 Received message from Master: op=Filter serial=261347 03:47:44 Color wheel filter change from 0 to 0 03:47:44 FLIGetFilterPos err=0 currentPosition=0 03:47:44 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:44 Filter is already there-color wheel unchanged 03:47:44 Received message from Master: op=Shutter serial=261348 03:47:44 Shutter LASER close 03:47:44 Received message from Camera: op=State serial=261350 03:47:44 GetSingleValue result=40 Value=cccccccc 03:47:44 SkyScan query 03:47:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:47:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:45 Parameters OK 03:47:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:45 Set A/D data flow result=40 03:47:45 Set A/D channel type result=40 03:47:45 Set A/D encoding result=40 03:47:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:45 Set channel filter=0.000000e+000 result=40 03:47:45 Config A/D Result=40 03:47:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:45 Get A/D filter: -9.255963e+061 result=40 03:47:45 Get A/D value=-858993460 result=40 03:47:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:45 Parameters OK 03:47:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:45 Set A/D data flow result=40 03:47:45 Set A/D channel type result=40 03:47:45 Set A/D encoding result=40 03:47:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:45 Set channel filter=0.000000e+000 result=40 03:47:45 Config A/D Result=40 03:47:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:45 Get A/D filter: -9.255963e+061 result=40 03:47:45 Get A/D value=-858993460 result=40 03:47:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:45 Aux= 03:47:45 Message to Camera, serial 261350 queued 03:48:22 Received message from Master: op=PointingHead serial=261363 03:48:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:48:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:48:22 Point started: ret=0 03:48:22 point_skyscan result=0 03:48:23 Check angles 03:48:23 SkyScan query 03:48:23 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.21<-17414 Statuses=0009 0009 03:48:23 Msec=0 True Az=109.02 Ze=-81.21 Az status=0009 Ze status=0009 03:48:24 Check angles 03:48:24 SkyScan query 03:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 03:48:24 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 03:48:24 Check angles 03:48:24 SkyScan query 03:48:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 03:48:25 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 03:48:25 Check angles 03:48:25 SkyScan query 03:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 03:48:26 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 03:48:26 Check angles 03:48:26 SkyScan query 03:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 03:48:26 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 03:48:27 Check angles 03:48:27 SkyScan query 03:48:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:48:27 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:48:27 Message to Master queued w/err=0: serial=261363 error=0 03:48:32 Received message from Master: op=Filter serial=261364 03:48:32 Color wheel filter change from 0 to 0 03:48:32 FLIGetFilterPos err=0 currentPosition=0 03:48:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:32 Filter is already there-color wheel unchanged 03:48:32 Received message from Master: op=Shutter serial=261365 03:48:32 Shutter LASER open 03:48:32 Received message from Camera: op=State serial=261367 03:48:32 GetSingleValue result=40 Value=cccccccc 03:48:32 SkyScan query 03:48:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:48:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:33 Parameters OK 03:48:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:33 Set A/D data flow result=40 03:48:33 Set A/D channel type result=40 03:48:33 Set A/D encoding result=40 03:48:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:33 Set channel filter=0.000000e+000 result=40 03:48:33 Config A/D Result=40 03:48:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:33 Get A/D filter: -9.255963e+061 result=40 03:48:33 Get A/D value=-858993460 result=40 03:48:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:33 Parameters OK 03:48:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:33 Set A/D data flow result=40 03:48:33 Set A/D channel type result=40 03:48:33 Set A/D encoding result=40 03:48:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:33 Set channel filter=0.000000e+000 result=40 03:48:33 Config A/D Result=40 03:48:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:33 Get A/D filter: -9.255963e+061 result=40 03:48:33 Get A/D value=-858993460 result=40 03:48:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:33 Aux= 03:48:33 Message to Camera, serial 261367 queued 03:48:41 Received message from Master: op=Shutter serial=261377 03:48:41 Shutter LASER close 03:48:42 Received message from Master: op=PointingHead serial=261381 03:48:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:48:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:48:42 Point started: ret=0 03:48:42 point_skyscan result=0 03:48:43 Check angles 03:48:43 SkyScan query 03:48:44 SkyScan query done: ret=0 az=89.625<-5975 ze=156.825<-1545 Statuses=0009 0009 03:48:44 Msec=0 True Az=89.625 Ze=156.825 Az status=0009 Ze status=0009 03:48:44 Check angles 03:48:44 SkyScan query 03:48:44 SkyScan query done: ret=0 az=71.805<-4787 ze=135.435<-2971 Statuses=0009 0009 03:48:44 Msec=750 True Az=71.805 Ze=135.435 Az status=0009 Ze status=0009 03:48:45 Check angles 03:48:45 SkyScan query 03:48:45 SkyScan query done: ret=0 az=54.345<-3623 ze=114.42<-4372 Statuses=0009 0009 03:48:45 Msec=1500 True Az=54.345 Ze=114.42 Az status=0009 Ze status=0009 03:48:45 Check angles 03:48:45 SkyScan query 03:48:46 SkyScan query done: ret=0 az=40.995<-2733 ze=93.51<-5766 Statuses=0009 0009 03:48:46 Msec=2250 True Az=40.995 Ze=93.51 Az status=0009 Ze status=0009 03:48:46 Check angles 03:48:46 SkyScan query 03:48:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.525<-7165 Statuses=0008 0009 03:48:47 Msec=3000 True Az=40.995 Ze=72.525 Az status=0008 Ze status=0009 03:48:47 Check angles 03:48:47 SkyScan query 03:48:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 03:48:47 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 03:48:48 Check angles 03:48:48 SkyScan query 03:48:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:48:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:48:48 Message to Master queued w/err=0: serial=261381 error=0 03:48:53 Received message from Master: op=Filter serial=261382 03:48:53 Color wheel filter change from 0 to 0 03:48:53 FLIGetFilterPos err=0 currentPosition=0 03:48:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:53 Filter is already there-color wheel unchanged 03:48:53 Received message from Master: op=Shutter serial=261383 03:48:53 Shutter LASER close 03:48:53 Received message from Camera: op=State serial=261385 03:48:53 GetSingleValue result=40 Value=cccccccc 03:48:53 SkyScan query 03:48:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:48:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:54 Parameters OK 03:48:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:54 Set A/D data flow result=40 03:48:54 Set A/D channel type result=40 03:48:54 Set A/D encoding result=40 03:48:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:54 Set channel filter=0.000000e+000 result=40 03:48:54 Config A/D Result=40 03:48:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:54 Get A/D filter: -9.255963e+061 result=40 03:48:54 Get A/D value=-858993460 result=40 03:48:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:54 Parameters OK 03:48:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:54 Set A/D data flow result=40 03:48:54 Set A/D channel type result=40 03:48:54 Set A/D encoding result=40 03:48:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:54 Set channel filter=0.000000e+000 result=40 03:48:54 Config A/D Result=40 03:48:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:54 Get A/D filter: -9.255963e+061 result=40 03:48:54 Get A/D value=-858993460 result=40 03:48:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:54 Aux= 03:48:54 Message to Camera, serial 261385 queued 03:49:31 Received message from Master: op=PointingHead serial=261398 03:49:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:49:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:49:31 Point started: ret=0 03:49:31 point_skyscan result=0 03:49:32 Check angles 03:49:32 SkyScan query 03:49:33 SkyScan query done: ret=0 az=40.995<-2733 ze=21.51<-10566 Statuses=0008 0009 03:49:33 Msec=0 True Az=40.995 Ze=21.51 Az status=0008 Ze status=0009 03:49:33 Check angles 03:49:33 SkyScan query 03:49:33 SkyScan query done: ret=0 az=40.995<-2733 ze=0.48<-11968 Statuses=0008 0009 03:49:33 Msec=750 True Az=40.995 Ze=0.48 Az status=0008 Ze status=0009 03:49:34 Check angles 03:49:34 SkyScan query 03:49:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.445<-13363 Statuses=0008 0009 03:49:34 Msec=1500 True Az=40.995 Ze=-20.445 Az status=0008 Ze status=0009 03:49:34 Check angles 03:49:34 SkyScan query 03:49:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 03:49:35 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 03:49:35 Check angles 03:49:35 SkyScan query 03:49:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:49:36 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:49:36 Message to Master queued w/err=0: serial=261398 error=0 03:49:41 Received message from Master: op=Filter serial=261399 03:49:41 Color wheel filter change from 0 to 0 03:49:41 FLIGetFilterPos err=0 currentPosition=0 03:49:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:41 Filter is already there-color wheel unchanged 03:49:41 Received message from Master: op=Shutter serial=261400 03:49:41 Shutter LASER close 03:49:41 Received message from Camera: op=State serial=261402 03:49:41 GetSingleValue result=40 Value=cccccccc 03:49:41 SkyScan query 03:49:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:49:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:41 Parameters OK 03:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:41 Set A/D data flow result=40 03:49:41 Set A/D channel type result=40 03:49:41 Set A/D encoding result=40 03:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:41 Set channel filter=0.000000e+000 result=40 03:49:41 Config A/D Result=40 03:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:41 Get A/D filter: -9.255963e+061 result=40 03:49:41 Get A/D value=-858993460 result=40 03:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:41 Parameters OK 03:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:41 Set A/D data flow result=40 03:49:41 Set A/D channel type result=40 03:49:41 Set A/D encoding result=40 03:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:41 Set channel filter=0.000000e+000 result=40 03:49:41 Config A/D Result=40 03:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:41 Get A/D filter: -9.255963e+061 result=40 03:49:41 Get A/D value=-858993460 result=40 03:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:41 Aux= 03:49:41 Message to Camera, serial 261402 queued 03:50:18 Received message from Master: op=PointingHead serial=261415 03:50:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:50:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:50:19 Point started: ret=0 03:50:19 point_skyscan result=0 03:50:19 Check angles 03:50:19 SkyScan query 03:50:20 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.22<-16548 Statuses=0009 0009 03:50:20 Msec=0 True Az=63.93 Ze=-68.22 Az status=0009 Ze status=0009 03:50:20 Check angles 03:50:20 SkyScan query 03:50:21 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.205<-17947 Statuses=0009 0009 03:50:21 Msec=750 True Az=81.33 Ze=-89.205 Az status=0009 Ze status=0009 03:50:21 Check angles 03:50:21 SkyScan query 03:50:22 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.13<-19342 Statuses=0009 0009 03:50:22 Msec=1500 True Az=98.82 Ze=-110.13 Az status=0009 Ze status=0009 03:50:22 Check angles 03:50:22 SkyScan query 03:50:22 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.55<-20770 Statuses=0009 0009 03:50:22 Msec=2250 True Az=116.745 Ze=-131.55 Az status=0009 Ze status=0009 03:50:22 Check angles 03:50:22 SkyScan query 03:50:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 03:50:23 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 03:50:23 Check angles 03:50:23 SkyScan query 03:50:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 03:50:24 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 03:50:24 Message to Master queued w/err=0: serial=261415 error=0 03:50:29 Received message from Master: op=Filter serial=261416 03:50:29 Color wheel filter change from 0 to 0 03:50:29 FLIGetFilterPos err=0 currentPosition=0 03:50:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:29 Filter is already there-color wheel unchanged 03:50:29 Received message from Master: op=Shutter serial=261417 03:50:29 Shutter LASER close 03:50:29 Received message from Camera: op=State serial=261419 03:50:29 GetSingleValue result=40 Value=cccccccc 03:50:29 SkyScan query 03:50:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:50:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:30 Parameters OK 03:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:30 Set A/D data flow result=40 03:50:30 Set A/D channel type result=40 03:50:30 Set A/D encoding result=40 03:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:30 Set channel filter=0.000000e+000 result=40 03:50:30 Config A/D Result=40 03:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:30 Get A/D filter: -9.255963e+061 result=40 03:50:30 Get A/D value=-858993460 result=40 03:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:30 Parameters OK 03:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:30 Set A/D data flow result=40 03:50:30 Set A/D channel type result=40 03:50:30 Set A/D encoding result=40 03:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:30 Set channel filter=0.000000e+000 result=40 03:50:30 Config A/D Result=40 03:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:30 Get A/D filter: -9.255963e+061 result=40 03:50:30 Get A/D value=-858993460 result=40 03:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:30 Aux= 03:50:30 Message to Camera, serial 261419 queued 03:51:05 Received message from Master: op=PointingHead serial=261431 03:51:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:51:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:51:06 Point started: ret=0 03:51:06 point_skyscan result=0 03:51:07 Check angles 03:51:07 SkyScan query 03:51:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.375<-23425 Statuses=0009 0009 03:51:07 Msec=0 True Az=113.01 Ze=-171.375 Az status=0009 Ze status=0009 03:51:07 Check angles 03:51:07 SkyScan query 03:51:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:51:08 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:51:08 Message to Master queued w/err=0: serial=261431 error=0 03:51:13 Received message from Master: op=Filter serial=261432 03:51:13 Color wheel filter change from 0 to 0 03:51:13 FLIGetFilterPos err=0 currentPosition=0 03:51:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:13 Filter is already there-color wheel unchanged 03:51:13 Received message from Master: op=Shutter serial=261433 03:51:13 Shutter LASER open 03:51:13 Received message from Camera: op=State serial=261435 03:51:13 GetSingleValue result=40 Value=cccccccc 03:51:13 SkyScan query 03:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:51:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:14 Parameters OK 03:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:14 Set A/D data flow result=40 03:51:14 Set A/D channel type result=40 03:51:14 Set A/D encoding result=40 03:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:14 Set channel filter=0.000000e+000 result=40 03:51:14 Config A/D Result=40 03:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:14 Get A/D filter: -9.255963e+061 result=40 03:51:14 Get A/D value=-858993460 result=40 03:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:14 Parameters OK 03:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:14 Set A/D data flow result=40 03:51:14 Set A/D channel type result=40 03:51:14 Set A/D encoding result=40 03:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:14 Set channel filter=0.000000e+000 result=40 03:51:14 Config A/D Result=40 03:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:14 Get A/D filter: -9.255963e+061 result=40 03:51:14 Get A/D value=-858993460 result=40 03:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:14 Aux= 03:51:14 Message to Camera, serial 261435 queued 03:51:22 Received message from Master: op=Shutter serial=261445 03:51:22 Shutter LASER close 03:51:23 Received message from Master: op=PointingHead serial=261449 03:51:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:51:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:51:23 Point started: ret=0 03:51:23 point_skyscan result=0 03:51:24 Check angles 03:51:24 SkyScan query 03:51:25 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.295<-21553 Statuses=0009 0009 03:51:25 Msec=0 True Az=135.885 Ze=-143.295 Az status=0009 Ze status=0009 03:51:25 Check angles 03:51:25 SkyScan query 03:51:25 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.89<-20126 Statuses=0009 0009 03:51:25 Msec=750 True Az=153.78 Ze=-121.89 Az status=0009 Ze status=0009 03:51:25 Check angles 03:51:25 SkyScan query 03:51:26 SkyScan query done: ret=0 az=171.63<-11442 ze=-100.44<-18696 Statuses=0009 0009 03:51:26 Msec=1500 True Az=171.63 Ze=-100.44 Az status=0009 Ze status=0009 03:51:26 Check angles 03:51:26 SkyScan query 03:51:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.545<-17303 Statuses=0008 0009 03:51:27 Msec=2250 True Az=176.01 Ze=-79.545 Az status=0008 Ze status=0009 03:51:27 Check angles 03:51:27 SkyScan query 03:51:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.575<-15905 Statuses=0008 0009 03:51:28 Msec=3000 True Az=176.01 Ze=-58.575 Az status=0008 Ze status=0009 03:51:28 Check angles 03:51:28 SkyScan query 03:51:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:51:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:51:28 Message to Master queued w/err=0: serial=261449 error=0 03:51:33 Received message from Master: op=Filter serial=261450 03:51:33 Color wheel filter change from 0 to 0 03:51:33 FLIGetFilterPos err=0 currentPosition=0 03:51:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:33 Filter is already there-color wheel unchanged 03:51:33 Received message from Master: op=Shutter serial=261451 03:51:33 Shutter LASER close 03:51:34 Received message from Camera: op=State serial=261453 03:51:34 GetSingleValue result=40 Value=cccccccc 03:51:34 SkyScan query 03:51:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:51:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:34 Parameters OK 03:51:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:34 Set A/D data flow result=40 03:51:34 Set A/D channel type result=40 03:51:34 Set A/D encoding result=40 03:51:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:34 Set channel filter=0.000000e+000 result=40 03:51:34 Config A/D Result=40 03:51:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:34 Get A/D filter: -9.255963e+061 result=40 03:51:34 Get A/D value=-858993460 result=40 03:51:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:34 Parameters OK 03:51:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:34 Set A/D data flow result=40 03:51:34 Set A/D channel type result=40 03:51:34 Set A/D encoding result=40 03:51:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:34 Set channel filter=0.000000e+000 result=40 03:51:34 Config A/D Result=40 03:51:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:34 Get A/D filter: -9.255963e+061 result=40 03:51:34 Get A/D value=-858993460 result=40 03:51:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:34 Aux= 03:51:34 Message to Camera, serial 261453 queued 03:52:11 Received message from Master: op=PointingHead serial=261466 03:52:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:52:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:52:11 Point started: ret=0 03:52:11 point_skyscan result=0 03:52:12 Check angles 03:52:12 SkyScan query 03:52:13 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.465<-13431 Statuses=0009 0009 03:52:13 Msec=0 True Az=152.775 Ze=-21.465 Az status=0009 Ze status=0009 03:52:13 Check angles 03:52:13 SkyScan query 03:52:14 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.525<-12035 Statuses=0009 0009 03:52:14 Msec=750 True Az=135.27 Ze=-0.525 Az status=0009 Ze status=0009 03:52:14 Check angles 03:52:14 SkyScan query 03:52:14 SkyScan query done: ret=0 az=117.825<-7855 ze=20.445<-10637 Statuses=0009 0009 03:52:14 Msec=1500 True Az=117.825 Ze=20.445 Az status=0009 Ze status=0009 03:52:14 Check angles 03:52:14 SkyScan query 03:52:15 SkyScan query done: ret=0 az=100.44<-6696 ze=41.4<-9240 Statuses=0009 0009 03:52:15 Msec=2250 True Az=100.44 Ze=41.4 Az status=0009 Ze status=0009 03:52:15 Check angles 03:52:15 SkyScan query 03:52:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 03:52:16 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 03:52:16 Check angles 03:52:16 SkyScan query 03:52:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:52:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:52:17 Message to Master queued w/err=0: serial=261466 error=0 03:52:22 Received message from Master: op=Filter serial=261467 03:52:22 Color wheel filter change from 0 to 0 03:52:22 FLIGetFilterPos err=0 currentPosition=0 03:52:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:22 Filter is already there-color wheel unchanged 03:52:22 Received message from Master: op=Shutter serial=261468 03:52:22 Shutter LASER close 03:52:22 Received message from Camera: op=State serial=261470 03:52:22 GetSingleValue result=40 Value=cccccccc 03:52:22 SkyScan query 03:52:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:52:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:22 Parameters OK 03:52:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:22 Set A/D data flow result=40 03:52:22 Set A/D channel type result=40 03:52:22 Set A/D encoding result=40 03:52:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:22 Set channel filter=0.000000e+000 result=40 03:52:22 Config A/D Result=40 03:52:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:22 Get A/D filter: -9.255963e+061 result=40 03:52:22 Get A/D value=-858993460 result=40 03:52:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:22 Parameters OK 03:52:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:22 Set A/D data flow result=40 03:52:22 Set A/D channel type result=40 03:52:22 Set A/D encoding result=40 03:52:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:22 Set channel filter=0.000000e+000 result=40 03:52:22 Config A/D Result=40 03:52:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:22 Get A/D filter: -9.255963e+061 result=40 03:52:22 Get A/D value=-858993460 result=40 03:52:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:22 Aux= 03:52:22 Message to Camera, serial 261470 queued 03:52:59 Received message from Master: op=PointingHead serial=261483 03:52:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:52:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:52:59 Point started: ret=0 03:52:59 point_skyscan result=0 03:53:00 Check angles 03:53:00 SkyScan query 03:53:01 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 03:53:01 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 03:53:01 Check angles 03:53:01 SkyScan query 03:53:02 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 03:53:02 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 03:53:02 Check angles 03:53:02 SkyScan query 03:53:02 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 03:53:02 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 03:53:02 Check angles 03:53:02 SkyScan query 03:53:03 SkyScan query done: ret=0 az=161.745<-10783 ze=38.505<-9433 Statuses=0009 0008 03:53:03 Msec=2250 True Az=161.745 Ze=38.505 Az status=0009 Ze status=0008 03:53:03 Check angles 03:53:03 SkyScan query 03:53:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 03:53:04 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 03:53:04 Check angles 03:53:04 SkyScan query 03:53:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:53:05 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 03:53:05 Message to Master queued w/err=0: serial=261483 error=0 03:53:10 Received message from Master: op=Filter serial=261484 03:53:10 Color wheel filter change from 0 to 0 03:53:10 FLIGetFilterPos err=0 currentPosition=0 03:53:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:10 Filter is already there-color wheel unchanged 03:53:10 Received message from Master: op=Shutter serial=261485 03:53:10 Shutter LASER close 03:53:10 Received message from Camera: op=State serial=261487 03:53:10 GetSingleValue result=40 Value=cccccccc 03:53:10 SkyScan query 03:53:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:53:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:10 Parameters OK 03:53:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:10 Set A/D data flow result=40 03:53:10 Set A/D channel type result=40 03:53:10 Set A/D encoding result=40 03:53:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:10 Set channel filter=0.000000e+000 result=40 03:53:10 Config A/D Result=40 03:53:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:10 Get A/D filter: -9.255963e+061 result=40 03:53:10 Get A/D value=-858993460 result=40 03:53:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:10 Parameters OK 03:53:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:10 Set A/D data flow result=40 03:53:10 Set A/D channel type result=40 03:53:10 Set A/D encoding result=40 03:53:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:10 Set channel filter=0.000000e+000 result=40 03:53:10 Config A/D Result=40 03:53:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:10 Get A/D filter: -9.255963e+061 result=40 03:53:10 Get A/D value=-858993460 result=40 03:53:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:10 Aux= 03:53:10 Message to Camera, serial 261487 queued 03:53:47 Received message from Master: op=PointingHead serial=261500 03:53:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:53:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:53:48 Point started: ret=0 03:53:48 point_skyscan result=0 03:53:48 Check angles 03:53:48 SkyScan query 03:53:49 SkyScan query done: ret=0 az=153.15<-10210 ze=8.85<-11410 Statuses=0009 0009 03:53:49 Msec=0 True Az=153.15 Ze=8.85 Az status=0009 Ze status=0009 03:53:49 Check angles 03:53:49 SkyScan query 03:53:50 SkyScan query done: ret=0 az=135.69<-9046 ze=-12.165<-12811 Statuses=0009 0009 03:53:50 Msec=750 True Az=135.69 Ze=-12.165 Az status=0009 Ze status=0009 03:53:50 Check angles 03:53:50 SkyScan query 03:53:50 SkyScan query done: ret=0 az=118.125<-7875 ze=-33.03<-14202 Statuses=0009 0009 03:53:50 Msec=1500 True Az=118.125 Ze=-33.03 Az status=0009 Ze status=0009 03:53:51 Check angles 03:53:51 SkyScan query 03:53:51 SkyScan query done: ret=0 az=100.755<-6717 ze=-51.525<-15435 Statuses=0009 0009 03:53:51 Msec=2250 True Az=100.755 Ze=-51.525 Az status=0009 Ze status=0009 03:53:51 Check angles 03:53:51 SkyScan query 03:53:52 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 03:53:52 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 03:53:52 Check angles 03:53:52 SkyScan query 03:53:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:53:53 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:53:53 Message to Master queued w/err=0: serial=261500 error=0 03:53:58 Received message from Master: op=Filter serial=261501 03:53:58 Color wheel filter change from 0 to 0 03:53:58 FLIGetFilterPos err=0 currentPosition=0 03:53:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:58 Filter is already there-color wheel unchanged 03:53:58 Received message from Master: op=Shutter serial=261502 03:53:58 Shutter LASER close 03:53:58 Received message from Camera: op=State serial=261504 03:53:58 GetSingleValue result=40 Value=cccccccc 03:53:58 SkyScan query 03:53:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:53:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:58 Parameters OK 03:53:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:58 Set A/D data flow result=40 03:53:58 Set A/D channel type result=40 03:53:58 Set A/D encoding result=40 03:53:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:58 Set channel filter=0.000000e+000 result=40 03:53:58 Config A/D Result=40 03:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:58 Get A/D filter: -9.255963e+061 result=40 03:53:58 Get A/D value=-858993460 result=40 03:53:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:58 Parameters OK 03:53:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:58 Set A/D data flow result=40 03:53:58 Set A/D channel type result=40 03:53:58 Set A/D encoding result=40 03:53:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:58 Set channel filter=0.000000e+000 result=40 03:53:58 Config A/D Result=40 03:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:58 Get A/D filter: -9.255963e+061 result=40 03:53:58 Get A/D value=-858993460 result=40 03:53:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:58 Aux= 03:53:58 Message to Camera, serial 261504 queued 03:54:35 Received message from Master: op=PointingHead serial=261517 03:54:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:54:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:54:36 Point started: ret=0 03:54:36 point_skyscan result=0 03:54:36 Check angles 03:54:36 SkyScan query 03:54:37 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.06<-17404 Statuses=0009 0009 03:54:37 Msec=0 True Az=108.93 Ze=-81.06 Az status=0009 Ze status=0009 03:54:37 Check angles 03:54:37 SkyScan query 03:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 03:54:38 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 03:54:38 Check angles 03:54:38 SkyScan query 03:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 03:54:38 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 03:54:39 Check angles 03:54:39 SkyScan query 03:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.97<-21598 Statuses=0008 0009 03:54:39 Msec=2250 True Az=112.995 Ze=-143.97 Az status=0008 Ze status=0009 03:54:39 Check angles 03:54:39 SkyScan query 03:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.925<-22995 Statuses=0008 0009 03:54:40 Msec=3000 True Az=112.995 Ze=-164.925 Az status=0008 Ze status=0009 03:54:40 Check angles 03:54:40 SkyScan query 03:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:54:41 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:54:41 Message to Master queued w/err=0: serial=261517 error=0 03:54:46 Received message from Master: op=Filter serial=261518 03:54:46 Color wheel filter change from 0 to 0 03:54:46 FLIGetFilterPos err=0 currentPosition=0 03:54:46 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:46 Filter is already there-color wheel unchanged 03:54:46 Received message from Master: op=Shutter serial=261519 03:54:46 Shutter LASER open 03:54:46 Received message from Camera: op=State serial=261521 03:54:46 GetSingleValue result=40 Value=cccccccc 03:54:46 SkyScan query 03:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:54:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:47 Parameters OK 03:54:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:47 Set A/D data flow result=40 03:54:47 Set A/D channel type result=40 03:54:47 Set A/D encoding result=40 03:54:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:47 Set channel filter=0.000000e+000 result=40 03:54:47 Config A/D Result=40 03:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:47 Get A/D filter: -9.255963e+061 result=40 03:54:47 Get A/D value=-858993460 result=40 03:54:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:47 Parameters OK 03:54:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:47 Set A/D data flow result=40 03:54:47 Set A/D channel type result=40 03:54:47 Set A/D encoding result=40 03:54:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:47 Set channel filter=0.000000e+000 result=40 03:54:47 Config A/D Result=40 03:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:47 Get A/D filter: -9.255963e+061 result=40 03:54:47 Get A/D value=-858993460 result=40 03:54:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:47 Aux= 03:54:47 Message to Camera, serial 261521 queued 03:54:54 Received message from Master: op=Shutter serial=261530 03:54:54 Shutter LASER close 03:54:54 Received message from Master: op=PointingHead serial=261534 03:54:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:54:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:54:55 Point started: ret=0 03:54:55 point_skyscan result=0 03:54:56 Check angles 03:54:56 SkyScan query 03:54:56 SkyScan query done: ret=0 az=90<-6000 ze=157.365<-1509 Statuses=0009 0009 03:54:56 Msec=0 True Az=90 Ze=157.365 Az status=0009 Ze status=0009 03:54:56 Check angles 03:54:56 SkyScan query 03:54:57 SkyScan query done: ret=0 az=72.075<-4805 ze=135.99<-2934 Statuses=0009 0009 03:54:57 Msec=750 True Az=72.075 Ze=135.99 Az status=0009 Ze status=0009 03:54:57 Check angles 03:54:57 SkyScan query 03:54:58 SkyScan query done: ret=0 az=54.72<-3648 ze=115.02<-4332 Statuses=0009 0009 03:54:58 Msec=1500 True Az=54.72 Ze=115.02 Az status=0009 Ze status=0009 03:54:58 Check angles 03:54:58 SkyScan query 03:54:58 SkyScan query done: ret=0 az=40.98<-2732 ze=94.05<-5730 Statuses=0009 0009 03:54:58 Msec=2250 True Az=40.98 Ze=94.05 Az status=0009 Ze status=0009 03:54:59 Check angles 03:54:59 SkyScan query 03:54:59 SkyScan query done: ret=0 az=40.995<-2733 ze=72.645<-7157 Statuses=0008 0009 03:54:59 Msec=3000 True Az=40.995 Ze=72.645 Az status=0008 Ze status=0009 03:54:59 Check angles 03:54:59 SkyScan query 03:55:00 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 03:55:00 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 03:55:00 Check angles 03:55:00 SkyScan query 03:55:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:55:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:55:01 Message to Master queued w/err=0: serial=261534 error=0 03:55:06 Received message from Master: op=Filter serial=261535 03:55:06 Color wheel filter change from 0 to 0 03:55:06 FLIGetFilterPos err=0 currentPosition=0 03:55:06 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:06 Filter is already there-color wheel unchanged 03:55:06 Received message from Master: op=Shutter serial=261536 03:55:06 Shutter LASER close 03:55:06 Received message from Camera: op=State serial=261538 03:55:06 GetSingleValue result=40 Value=cccccccc 03:55:06 SkyScan query 03:55:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:55:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:07 Parameters OK [UTC 2018-12-19 03:55:07] 03:55:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:07 Set A/D data flow result=40 03:55:07 Set A/D channel type result=40 03:55:07 Set A/D encoding result=40 03:55:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:07 Set channel filter=0.000000e+000 result=40 03:55:07 Config A/D Result=40 03:55:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:07 Get A/D filter: -9.255963e+061 result=40 03:55:07 Get A/D value=-858993460 result=40 03:55:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:07 Parameters OK 03:55:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:07 Set A/D data flow result=40 03:55:07 Set A/D channel type result=40 03:55:07 Set A/D encoding result=40 03:55:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:07 Set channel filter=0.000000e+000 result=40 03:55:07 Config A/D Result=40 03:55:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:07 Get A/D filter: -9.255963e+061 result=40 03:55:07 Get A/D value=-858993460 result=40 03:55:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:07 Aux= 03:55:07 Message to Camera, serial 261538 queued 03:55:44 Received message from Master: op=PointingHead serial=261551 03:55:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:55:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:55:44 Point started: ret=0 03:55:44 point_skyscan result=0 03:55:45 Check angles 03:55:45 SkyScan query 03:55:45 SkyScan query done: ret=0 az=40.995<-2733 ze=21.255<-10583 Statuses=0008 0009 03:55:45 Msec=0 True Az=40.995 Ze=21.255 Az status=0008 Ze status=0009 03:55:45 Check angles 03:55:45 SkyScan query 03:55:46 SkyScan query done: ret=0 az=40.995<-2733 ze=0.24<-11984 Statuses=0008 0009 03:55:46 Msec=750 True Az=40.995 Ze=0.24 Az status=0008 Ze status=0009 03:55:46 Check angles 03:55:46 SkyScan query 03:55:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.67<-13378 Statuses=0008 0009 03:55:47 Msec=1500 True Az=40.995 Ze=-20.67 Az status=0008 Ze status=0009 03:55:47 Check angles 03:55:47 SkyScan query 03:55:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:55:48 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:55:48 Check angles 03:55:48 SkyScan query 03:55:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:55:48 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:55:48 Message to Master queued w/err=0: serial=261551 error=0 [UTC 2018-12-19 03:55:52] 03:55:53 Received message from Master: op=Filter serial=261552 03:55:53 Color wheel filter change from 0 to 0 03:55:53 FLIGetFilterPos err=0 currentPosition=0 03:55:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:53 Filter is already there-color wheel unchanged 03:55:53 Received message from Master: op=Shutter serial=261553 03:55:53 Shutter LASER close 03:55:53 Received message from Camera: op=State serial=261555 03:55:53 GetSingleValue result=40 Value=cccccccc 03:55:53 SkyScan query 03:55:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:55:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:54 Parameters OK 03:55:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:54 Set A/D data flow result=40 03:55:54 Set A/D channel type result=40 03:55:54 Set A/D encoding result=40 03:55:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:54 Set channel filter=0.000000e+000 result=40 03:55:54 Config A/D Result=40 03:55:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:54 Get A/D filter: -9.255963e+061 result=40 03:55:54 Get A/D value=-858993460 result=40 03:55:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:54 Parameters OK 03:55:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:54 Set A/D data flow result=40 03:55:54 Set A/D channel type result=40 03:55:54 Set A/D encoding result=40 03:55:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:54 Set channel filter=0.000000e+000 result=40 03:55:54 Config A/D Result=40 03:55:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:54 Get A/D filter: -9.255963e+061 result=40 03:55:54 Get A/D value=-858993460 result=40 03:55:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:54 Aux= 03:55:54 Message to Camera, serial 261555 queued 03:56:31 Received message from Master: op=PointingHead serial=261568 03:56:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:56:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:56:31 Point started: ret=0 03:56:31 point_skyscan result=0 03:56:32 Check angles 03:56:32 SkyScan query 03:56:33 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.19<-16546 Statuses=0009 0009 03:56:33 Msec=0 True Az=63.87 Ze=-68.19 Az status=0009 Ze status=0009 03:56:33 Check angles 03:56:33 SkyScan query 03:56:33 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.175<-17945 Statuses=0009 0009 03:56:33 Msec=750 True Az=81.3 Ze=-89.175 Az status=0009 Ze status=0009 03:56:34 Check angles 03:56:34 SkyScan query 03:56:34 SkyScan query done: ret=0 az=99.315<-6621 ze=-110.595<-19373 Statuses=0009 0009 03:56:34 Msec=1500 True Az=99.315 Ze=-110.595 Az status=0009 Ze status=0009 03:56:34 Check angles 03:56:34 SkyScan query 03:56:35 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.505<-20767 Statuses=0009 0009 03:56:35 Msec=2250 True Az=116.7 Ze=-131.505 Az status=0009 Ze status=0009 03:56:35 Check angles 03:56:35 SkyScan query 03:56:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 03:56:36 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 03:56:36 Check angles 03:56:36 SkyScan query 03:56:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 03:56:36 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 03:56:36 Message to Master queued w/err=0: serial=261568 error=0 03:56:41 Received message from Master: op=Filter serial=261569 03:56:41 Color wheel filter change from 0 to 0 03:56:41 FLIGetFilterPos err=0 currentPosition=0 03:56:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:41 Filter is already there-color wheel unchanged 03:56:42 Received message from Master: op=Shutter serial=261570 03:56:42 Shutter LASER close 03:56:42 Received message from Camera: op=State serial=261572 03:56:42 GetSingleValue result=40 Value=cccccccc 03:56:42 SkyScan query 03:56:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:56:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:42 Parameters OK 03:56:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:42 Set A/D data flow result=40 03:56:42 Set A/D channel type result=40 03:56:42 Set A/D encoding result=40 03:56:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:42 Set channel filter=0.000000e+000 result=40 03:56:42 Config A/D Result=40 03:56:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:42 Get A/D filter: -9.255963e+061 result=40 03:56:42 Get A/D value=-858993460 result=40 03:56:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:42 Parameters OK 03:56:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:42 Set A/D data flow result=40 03:56:42 Set A/D channel type result=40 03:56:42 Set A/D encoding result=40 03:56:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:42 Set channel filter=0.000000e+000 result=40 03:56:42 Config A/D Result=40 03:56:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:42 Get A/D filter: -9.255963e+061 result=40 03:56:42 Get A/D value=-858993460 result=40 03:56:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:42 Aux= 03:56:42 Message to Camera, serial 261572 queued 03:57:19 Received message from Master: op=PointingHead serial=261585 03:57:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:57:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:57:19 Point started: ret=0 03:57:19 point_skyscan result=0 03:57:20 Check angles 03:57:20 SkyScan query 03:57:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 03:57:21 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 03:57:21 Check angles 03:57:21 SkyScan query 03:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:57:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:57:21 Message to Master queued w/err=0: serial=261585 error=0 03:57:26 Received message from Master: op=Filter serial=261586 03:57:26 Color wheel filter change from 0 to 0 03:57:26 FLIGetFilterPos err=0 currentPosition=0 03:57:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:26 Filter is already there-color wheel unchanged 03:57:27 Received message from Master: op=Shutter serial=261587 03:57:27 Shutter LASER open 03:57:27 Received message from Camera: op=State serial=261589 03:57:27 GetSingleValue result=40 Value=cccccccc 03:57:27 SkyScan query 03:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:57:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:27 Parameters OK 03:57:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:27 Set A/D data flow result=40 03:57:27 Set A/D channel type result=40 03:57:27 Set A/D encoding result=40 03:57:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:27 Set channel filter=0.000000e+000 result=40 03:57:27 Config A/D Result=40 03:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:27 Get A/D filter: -9.255963e+061 result=40 03:57:27 Get A/D value=-858993460 result=40 03:57:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:27 Parameters OK 03:57:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:27 Set A/D data flow result=40 03:57:27 Set A/D channel type result=40 03:57:27 Set A/D encoding result=40 03:57:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:27 Set channel filter=0.000000e+000 result=40 03:57:27 Config A/D Result=40 03:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:27 Get A/D filter: -9.255963e+061 result=40 03:57:27 Get A/D value=-858993460 result=40 03:57:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:27 Aux= 03:57:27 Message to Camera, serial 261589 queued 03:57:36 Received message from Master: op=Shutter serial=261599 03:57:36 Shutter LASER close 03:57:36 Received message from Master: op=PointingHead serial=261603 03:57:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:57:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:57:37 Point started: ret=0 03:57:37 point_skyscan result=0 03:57:37 Check angles 03:57:37 SkyScan query 03:57:38 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.445<-21563 Statuses=0009 0009 03:57:38 Msec=0 True Az=135.9 Ze=-143.445 Az status=0009 Ze status=0009 03:57:38 Check angles 03:57:38 SkyScan query 03:57:39 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.445<-20163 Statuses=0009 0009 03:57:39 Msec=750 True Az=153.3 Ze=-122.445 Az status=0009 Ze status=0009 03:57:39 Check angles 03:57:39 SkyScan query 03:57:40 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.565<-18771 Statuses=0009 0009 03:57:40 Msec=1500 True Az=170.775 Ze=-101.565 Az status=0009 Ze status=0009 03:57:40 Check angles 03:57:40 SkyScan query 03:57:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.16<-17344 Statuses=0008 0009 03:57:40 Msec=2250 True Az=176.01 Ze=-80.16 Az status=0008 Ze status=0009 03:57:40 Check angles 03:57:40 SkyScan query 03:57:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 03:57:41 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 03:57:41 Check angles 03:57:41 SkyScan query 03:57:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:57:42 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:57:42 Message to Master queued w/err=0: serial=261603 error=0 03:57:47 Received message from Master: op=Filter serial=261604 03:57:47 Color wheel filter change from 0 to 0 03:57:47 FLIGetFilterPos err=0 currentPosition=0 03:57:47 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:47 Filter is already there-color wheel unchanged 03:57:47 Received message from Master: op=Shutter serial=261605 03:57:47 Shutter LASER close 03:57:47 Received message from Camera: op=State serial=261607 03:57:47 GetSingleValue result=40 Value=cccccccc 03:57:47 SkyScan query 03:57:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:57:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:48 Parameters OK 03:57:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:48 Set A/D data flow result=40 03:57:48 Set A/D channel type result=40 03:57:48 Set A/D encoding result=40 03:57:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:48 Set channel filter=0.000000e+000 result=40 03:57:48 Config A/D Result=40 03:57:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:48 Get A/D filter: -9.255963e+061 result=40 03:57:48 Get A/D value=-858993460 result=40 03:57:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:48 Parameters OK 03:57:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:48 Set A/D data flow result=40 03:57:48 Set A/D channel type result=40 03:57:48 Set A/D encoding result=40 03:57:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:48 Set channel filter=0.000000e+000 result=40 03:57:48 Config A/D Result=40 03:57:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:48 Get A/D filter: -9.255963e+061 result=40 03:57:48 Get A/D value=-858993460 result=40 03:57:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:48 Aux= 03:57:48 Message to Camera, serial 261607 queued 03:58:25 Received message from Master: op=PointingHead serial=261620 03:58:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:58:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:58:25 Point started: ret=0 03:58:25 point_skyscan result=0 03:58:26 Check angles 03:58:26 SkyScan query 03:58:26 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.3<-13420 Statuses=0009 0009 03:58:26 Msec=0 True Az=152.67 Ze=-21.3 Az status=0009 Ze status=0009 03:58:26 Check angles 03:58:26 SkyScan query 03:58:27 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.375<-12025 Statuses=0009 0009 03:58:27 Msec=750 True Az=135.09 Ze=-0.375 Az status=0009 Ze status=0009 03:58:27 Check angles 03:58:27 SkyScan query 03:58:28 SkyScan query done: ret=0 az=117.54<-7836 ze=20.61<-10626 Statuses=0009 0009 03:58:28 Msec=1500 True Az=117.54 Ze=20.61 Az status=0009 Ze status=0009 03:58:28 Check angles 03:58:28 SkyScan query 03:58:28 SkyScan query done: ret=0 az=100.305<-6687 ze=41.535<-9231 Statuses=0009 0009 03:58:28 Msec=2250 True Az=100.305 Ze=41.535 Az status=0009 Ze status=0009 03:58:29 Check angles 03:58:29 SkyScan query 03:58:29 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 03:58:29 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 03:58:29 Check angles 03:58:29 SkyScan query 03:58:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:58:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:58:30 Message to Master queued w/err=0: serial=261620 error=0 03:58:35 Received message from Master: op=Filter serial=261621 03:58:35 Color wheel filter change from 0 to 0 03:58:35 FLIGetFilterPos err=0 currentPosition=0 03:58:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:35 Filter is already there-color wheel unchanged 03:58:35 Received message from Master: op=Shutter serial=261622 03:58:35 Shutter LASER close 03:58:35 Received message from Camera: op=State serial=261624 03:58:35 GetSingleValue result=40 Value=cccccccc 03:58:35 SkyScan query 03:58:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:58:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:36 Parameters OK 03:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:36 Set A/D data flow result=40 03:58:36 Set A/D channel type result=40 03:58:36 Set A/D encoding result=40 03:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:36 Set channel filter=0.000000e+000 result=40 03:58:36 Config A/D Result=40 03:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:36 Get A/D filter: -9.255963e+061 result=40 03:58:36 Get A/D value=-858993460 result=40 03:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:36 Parameters OK 03:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:36 Set A/D data flow result=40 03:58:36 Set A/D channel type result=40 03:58:36 Set A/D encoding result=40 03:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:36 Set channel filter=0.000000e+000 result=40 03:58:36 Config A/D Result=40 03:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:36 Get A/D filter: -9.255963e+061 result=40 03:58:36 Get A/D value=-858993460 result=40 03:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:36 Aux= 03:58:36 Message to Camera, serial 261624 queued 03:59:13 Received message from Master: op=PointingHead serial=261637 03:59:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:59:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:59:13 Point started: ret=0 03:59:13 point_skyscan result=0 03:59:14 Check angles 03:59:14 SkyScan query 03:59:14 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 03:59:14 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 03:59:15 Check angles 03:59:15 SkyScan query 03:59:15 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 03:59:15 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 03:59:15 Check angles 03:59:15 SkyScan query 03:59:16 SkyScan query done: ret=0 az=143.805<-9587 ze=38.505<-9433 Statuses=0009 0008 03:59:16 Msec=1500 True Az=143.805 Ze=38.505 Az status=0009 Ze status=0008 03:59:16 Check angles 03:59:16 SkyScan query 03:59:17 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 03:59:17 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 03:59:17 Check angles 03:59:17 SkyScan query 03:59:17 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:59:17 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:59:18 Check angles 03:59:18 SkyScan query 03:59:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:59:18 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 03:59:18 Message to Master queued w/err=0: serial=261637 error=0 03:59:23 Received message from Master: op=Filter serial=261638 03:59:23 Color wheel filter change from 0 to 0 03:59:23 FLIGetFilterPos err=0 currentPosition=0 03:59:23 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:23 Filter is already there-color wheel unchanged 03:59:23 Received message from Master: op=Shutter serial=261639 03:59:23 Shutter LASER close 03:59:23 Received message from Camera: op=State serial=261641 03:59:23 GetSingleValue result=40 Value=cccccccc 03:59:23 SkyScan query 03:59:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:59:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:24 Parameters OK 03:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:24 Set A/D data flow result=40 03:59:24 Set A/D channel type result=40 03:59:24 Set A/D encoding result=40 03:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:24 Set channel filter=0.000000e+000 result=40 03:59:24 Config A/D Result=40 03:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:24 Get A/D filter: -9.255963e+061 result=40 03:59:24 Get A/D value=-858993460 result=40 03:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:24 Parameters OK 03:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:24 Set A/D data flow result=40 03:59:24 Set A/D channel type result=40 03:59:24 Set A/D encoding result=40 03:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:24 Set channel filter=0.000000e+000 result=40 03:59:24 Config A/D Result=40 03:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:24 Get A/D filter: -9.255963e+061 result=40 03:59:24 Get A/D value=-858993460 result=40 03:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:24 Aux= 03:59:24 Message to Camera, serial 261641 queued 04:00:01 Received message from Master: op=PointingHead serial=261654 04:00:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:00:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:00:01 Point started: ret=0 04:00:01 point_skyscan result=0 04:00:02 Check angles 04:00:02 SkyScan query 04:00:02 SkyScan query done: ret=0 az=152.955<-10197 ze=8.67<-11422 Statuses=0009 0009 04:00:02 Msec=0 True Az=152.955 Ze=8.67 Az status=0009 Ze status=0009 04:00:03 Check angles 04:00:03 SkyScan query 04:00:03 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.705<-12847 Statuses=0009 0009 04:00:03 Msec=750 True Az=135.09 Ze=-12.705 Az status=0009 Ze status=0009 04:00:03 Check angles 04:00:03 SkyScan query 04:00:04 SkyScan query done: ret=0 az=117.195<-7813 ze=-34.2<-14280 Statuses=0009 0009 04:00:04 Msec=1500 True Az=117.195 Ze=-34.2 Az status=0009 Ze status=0009 04:00:04 Check angles 04:00:04 SkyScan query 04:00:05 SkyScan query done: ret=0 az=99.765<-6651 ze=-51.57<-15438 Statuses=0009 0009 04:00:05 Msec=2250 True Az=99.765 Ze=-51.57 Az status=0009 Ze status=0009 04:00:05 Check angles 04:00:05 SkyScan query 04:00:05 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:00:05 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:00:06 Check angles 04:00:06 SkyScan query 04:00:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:00:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:00:06 Message to Master queued w/err=0: serial=261654 error=0 04:00:11 Received message from Master: op=Filter serial=261655 04:00:11 Color wheel filter change from 0 to 0 04:00:11 FLIGetFilterPos err=0 currentPosition=0 04:00:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:11 Filter is already there-color wheel unchanged 04:00:11 Received message from Master: op=Shutter serial=261656 04:00:11 Shutter LASER close 04:00:11 Received message from Camera: op=State serial=261658 04:00:11 GetSingleValue result=40 Value=cccccccc 04:00:11 SkyScan query 04:00:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:00:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:12 Parameters OK 04:00:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:12 Set A/D data flow result=40 04:00:12 Set A/D channel type result=40 04:00:12 Set A/D encoding result=40 04:00:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:12 Set channel filter=0.000000e+000 result=40 04:00:12 Config A/D Result=40 04:00:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:12 Get A/D filter: -9.255963e+061 result=40 04:00:12 Get A/D value=-858993460 result=40 04:00:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:12 Parameters OK 04:00:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:12 Set A/D data flow result=40 04:00:12 Set A/D channel type result=40 04:00:12 Set A/D encoding result=40 04:00:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:12 Set channel filter=0.000000e+000 result=40 04:00:12 Config A/D Result=40 04:00:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:12 Get A/D filter: -9.255963e+061 result=40 04:00:12 Get A/D value=-858993460 result=40 04:00:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:12 Aux= 04:00:12 Message to Camera, serial 261658 queued 04:00:49 Received message from Master: op=PointingHead serial=261671 04:00:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:00:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:00:49 Point started: ret=0 04:00:49 point_skyscan result=0 04:00:50 Check angles 04:00:50 SkyScan query 04:00:50 SkyScan query done: ret=0 az=108.765<-7251 ze=-81<-17400 Statuses=0009 0009 04:00:50 Msec=0 True Az=108.765 Ze=-81 Az status=0009 Ze status=0009 04:00:51 Check angles 04:00:51 SkyScan query 04:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 04:00:51 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 04:00:51 Check angles 04:00:51 SkyScan query 04:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.925<-20195 Statuses=0008 0009 04:00:52 Msec=1500 True Az=112.995 Ze=-122.925 Az status=0008 Ze status=0009 04:00:52 Check angles 04:00:52 SkyScan query 04:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 04:00:53 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 04:00:53 Check angles 04:00:53 SkyScan query 04:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 04:00:53 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 04:00:54 Check angles 04:00:54 SkyScan query 04:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:00:54 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:00:54 Message to Master queued w/err=0: serial=261671 error=0 04:00:59 Received message from Master: op=Filter serial=261672 04:00:59 Color wheel filter change from 0 to 0 04:00:59 FLIGetFilterPos err=0 currentPosition=0 04:00:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:59 Filter is already there-color wheel unchanged 04:00:59 Received message from Master: op=Shutter serial=261673 04:00:59 Shutter LASER open 04:01:00 Received message from Camera: op=State serial=261675 04:01:00 GetSingleValue result=40 Value=cccccccc 04:01:00 SkyScan query 04:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:01:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:00 Parameters OK 04:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:00 Set A/D data flow result=40 04:01:00 Set A/D channel type result=40 04:01:00 Set A/D encoding result=40 04:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:00 Set channel filter=0.000000e+000 result=40 04:01:00 Config A/D Result=40 04:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:00 Get A/D filter: -9.255963e+061 result=40 04:01:00 Get A/D value=-858993460 result=40 04:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:00 Parameters OK 04:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:00 Set A/D data flow result=40 04:01:00 Set A/D channel type result=40 04:01:00 Set A/D encoding result=40 04:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:00 Set channel filter=0.000000e+000 result=40 04:01:00 Config A/D Result=40 04:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:00 Get A/D filter: -9.255963e+061 result=40 04:01:00 Get A/D value=-858993460 result=40 04:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:00 Aux= 04:01:00 Message to Camera, serial 261675 queued 04:01:09 Received message from Master: op=Shutter serial=261685 04:01:09 Shutter LASER close 04:01:09 Received message from Master: op=PointingHead serial=261689 04:01:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:01:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:01:09 Point started: ret=0 04:01:09 point_skyscan result=0 04:01:10 Check angles 04:01:10 SkyScan query 04:01:11 SkyScan query done: ret=0 az=89.88<-5992 ze=157.17<-1522 Statuses=0009 0009 04:01:11 Msec=0 True Az=89.88 Ze=157.17 Az status=0009 Ze status=0009 04:01:11 Check angles 04:01:11 SkyScan query 04:01:11 SkyScan query done: ret=0 az=72.315<-4821 ze=136.215<-2919 Statuses=0009 0009 04:01:11 Msec=750 True Az=72.315 Ze=136.215 Az status=0009 Ze status=0009 04:01:12 Check angles 04:01:12 SkyScan query 04:01:12 SkyScan query done: ret=0 az=54.84<-3656 ze=115.275<-4315 Statuses=0009 0009 04:01:12 Msec=1500 True Az=54.84 Ze=115.275 Az status=0009 Ze status=0009 04:01:12 Check angles 04:01:12 SkyScan query 04:01:13 SkyScan query done: ret=0 az=40.98<-2732 ze=94.305<-5713 Statuses=0009 0009 04:01:13 Msec=2250 True Az=40.98 Ze=94.305 Az status=0009 Ze status=0009 04:01:13 Check angles 04:01:13 SkyScan query 04:01:14 SkyScan query done: ret=0 az=40.995<-2733 ze=73.35<-7110 Statuses=0008 0009 04:01:14 Msec=3000 True Az=40.995 Ze=73.35 Az status=0008 Ze status=0009 04:01:14 Check angles 04:01:14 SkyScan query 04:01:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.8<-8480 Statuses=0008 0009 04:01:14 Msec=3750 True Az=40.995 Ze=52.8 Az status=0008 Ze status=0009 04:01:15 Check angles 04:01:15 SkyScan query 04:01:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:01:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:01:15 Message to Master queued w/err=0: serial=261689 error=0 04:01:20 Received message from Master: op=Filter serial=261690 04:01:20 Color wheel filter change from 0 to 0 04:01:20 FLIGetFilterPos err=0 currentPosition=0 04:01:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:20 Filter is already there-color wheel unchanged 04:01:20 Received message from Master: op=Shutter serial=261691 04:01:20 Shutter LASER close 04:01:21 Received message from Camera: op=State serial=261693 04:01:21 GetSingleValue result=40 Value=cccccccc 04:01:21 SkyScan query 04:01:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:01:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:21 Parameters OK 04:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:21 Set A/D data flow result=40 04:01:21 Set A/D channel type result=40 04:01:21 Set A/D encoding result=40 04:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:21 Set channel filter=0.000000e+000 result=40 04:01:21 Config A/D Result=40 04:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:21 Get A/D filter: -9.255963e+061 result=40 04:01:21 Get A/D value=-858993460 result=40 04:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:21 Parameters OK 04:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:21 Set A/D data flow result=40 04:01:21 Set A/D channel type result=40 04:01:21 Set A/D encoding result=40 04:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:21 Set channel filter=0.000000e+000 result=40 04:01:21 Config A/D Result=40 04:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:21 Get A/D filter: -9.255963e+061 result=40 04:01:21 Get A/D value=-858993460 result=40 04:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:21 Aux= 04:01:21 Message to Camera, serial 261693 queued 04:01:58 Received message from Master: op=PointingHead serial=261706 04:01:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:01:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:01:58 Point started: ret=0 04:01:58 point_skyscan result=0 04:01:59 Check angles 04:01:59 SkyScan query 04:02:00 SkyScan query done: ret=0 az=40.995<-2733 ze=21.54<-10564 Statuses=0008 0009 04:02:00 Msec=0 True Az=40.995 Ze=21.54 Az status=0008 Ze status=0009 04:02:00 Check angles 04:02:00 SkyScan query 04:02:01 SkyScan query done: ret=0 az=40.995<-2733 ze=0.54<-11964 Statuses=0008 0009 04:02:01 Msec=750 True Az=40.995 Ze=0.54 Az status=0008 Ze status=0009 04:02:01 Check angles 04:02:01 SkyScan query 04:02:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.415<-13361 Statuses=0008 0009 04:02:01 Msec=1500 True Az=40.995 Ze=-20.415 Az status=0008 Ze status=0009 04:02:01 Check angles 04:02:01 SkyScan query 04:02:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 04:02:02 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 04:02:02 Check angles 04:02:02 SkyScan query 04:02:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:02:03 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:02:03 Message to Master queued w/err=0: serial=261706 error=0 04:02:08 Received message from Master: op=Filter serial=261707 04:02:08 Color wheel filter change from 0 to 0 04:02:08 FLIGetFilterPos err=0 currentPosition=0 04:02:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:08 Filter is already there-color wheel unchanged 04:02:08 Received message from Master: op=Shutter serial=261708 04:02:08 Shutter LASER close 04:02:08 Received message from Camera: op=State serial=261710 04:02:08 GetSingleValue result=40 Value=cccccccc 04:02:08 SkyScan query 04:02:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:02:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:09 Parameters OK 04:02:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:09 Set A/D data flow result=40 04:02:09 Set A/D channel type result=40 04:02:09 Set A/D encoding result=40 04:02:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:09 Set channel filter=0.000000e+000 result=40 04:02:09 Config A/D Result=40 04:02:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:09 Get A/D filter: -9.255963e+061 result=40 04:02:09 Get A/D value=-858993460 result=40 04:02:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:09 Parameters OK 04:02:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:09 Set A/D data flow result=40 04:02:09 Set A/D channel type result=40 04:02:09 Set A/D encoding result=40 04:02:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:09 Set channel filter=0.000000e+000 result=40 04:02:09 Config A/D Result=40 04:02:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:09 Get A/D filter: -9.255963e+061 result=40 04:02:09 Get A/D value=-858993460 result=40 04:02:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:09 Aux= 04:02:09 Message to Camera, serial 261710 queued 04:02:45 Received message from Master: op=PointingHead serial=261723 04:02:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:02:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:02:46 Point started: ret=0 04:02:46 point_skyscan result=0 04:02:47 Check angles 04:02:47 SkyScan query 04:02:47 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.175<-16545 Statuses=0009 0009 04:02:47 Msec=0 True Az=63.9 Ze=-68.175 Az status=0009 Ze status=0009 04:02:47 Check angles 04:02:47 SkyScan query 04:02:48 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.16<-17944 Statuses=0009 0009 04:02:48 Msec=750 True Az=81.36 Ze=-89.16 Az status=0009 Ze status=0009 04:02:48 Check angles 04:02:48 SkyScan query 04:02:49 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.085<-19339 Statuses=0009 0009 04:02:49 Msec=1500 True Az=98.865 Ze=-110.085 Az status=0009 Ze status=0009 04:02:49 Check angles 04:02:49 SkyScan query 04:02:49 SkyScan query done: ret=0 az=116.28<-7752 ze=-131.085<-20739 Statuses=0009 0009 04:02:49 Msec=2250 True Az=116.28 Ze=-131.085 Az status=0009 Ze status=0009 04:02:50 Check angles 04:02:50 SkyScan query 04:02:50 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.555<-21437 Statuses=0009 0008 04:02:50 Msec=3000 True Az=130.98 Ze=-141.555 Az status=0009 Ze status=0008 04:02:50 Check angles 04:02:50 SkyScan query 04:02:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 04:02:51 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 04:02:51 Message to Master queued w/err=0: serial=261723 error=0 04:02:56 Received message from Master: op=Filter serial=261724 04:02:56 Color wheel filter change from 0 to 0 04:02:56 FLIGetFilterPos err=0 currentPosition=0 04:02:56 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:56 Filter is already there-color wheel unchanged 04:02:56 Received message from Master: op=Shutter serial=261725 04:02:56 Shutter LASER close 04:02:56 Received message from Camera: op=State serial=261727 04:02:56 GetSingleValue result=40 Value=cccccccc 04:02:56 SkyScan query 04:02:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:02:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:57 Parameters OK 04:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:57 Set A/D data flow result=40 04:02:57 Set A/D channel type result=40 04:02:57 Set A/D encoding result=40 04:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:57 Set channel filter=0.000000e+000 result=40 04:02:57 Config A/D Result=40 04:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:57 Get A/D filter: -9.255963e+061 result=40 04:02:57 Get A/D value=-858993460 result=40 04:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:57 Parameters OK 04:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:57 Set A/D data flow result=40 04:02:57 Set A/D channel type result=40 04:02:57 Set A/D encoding result=40 04:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:57 Set channel filter=0.000000e+000 result=40 04:02:57 Config A/D Result=40 04:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:57 Get A/D filter: -9.255963e+061 result=40 04:02:57 Get A/D value=-858993460 result=40 04:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:57 Aux= 04:02:57 Message to Camera, serial 261727 queued 04:03:33 Received message from Master: op=PointingHead serial=261740 04:03:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:03:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:03:34 Point started: ret=0 04:03:34 point_skyscan result=0 04:03:35 Check angles 04:03:35 SkyScan query 04:03:35 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 04:03:35 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 04:03:35 Check angles 04:03:35 SkyScan query 04:03:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:03:36 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:03:36 Message to Master queued w/err=0: serial=261740 error=0 04:03:41 Received message from Master: op=Filter serial=261741 04:03:41 Color wheel filter change from 0 to 0 04:03:41 FLIGetFilterPos err=0 currentPosition=0 04:03:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:41 Filter is already there-color wheel unchanged 04:03:41 Received message from Master: op=Shutter serial=261742 04:03:41 Shutter LASER open 04:03:41 Received message from Camera: op=State serial=261744 04:03:41 GetSingleValue result=40 Value=cccccccc 04:03:41 SkyScan query 04:03:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:03:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:42 Parameters OK 04:03:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:42 Set A/D data flow result=40 04:03:42 Set A/D channel type result=40 04:03:42 Set A/D encoding result=40 04:03:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:42 Set channel filter=0.000000e+000 result=40 04:03:42 Config A/D Result=40 04:03:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:42 Get A/D filter: -9.255963e+061 result=40 04:03:42 Get A/D value=-858993460 result=40 04:03:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:42 Parameters OK 04:03:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:42 Set A/D data flow result=40 04:03:42 Set A/D channel type result=40 04:03:42 Set A/D encoding result=40 04:03:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:42 Set channel filter=0.000000e+000 result=40 04:03:42 Config A/D Result=40 04:03:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:42 Get A/D filter: -9.255963e+061 result=40 04:03:42 Get A/D value=-858993460 result=40 04:03:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:42 Aux= 04:03:42 Message to Camera, serial 261744 queued 04:03:49 Received message from Master: op=Shutter serial=261753 04:03:49 Shutter LASER close 04:03:50 Received message from Master: op=PointingHead serial=261757 04:03:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:03:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:03:50 Point started: ret=0 04:03:50 point_skyscan result=0 04:03:51 Check angles 04:03:51 SkyScan query 04:03:52 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.725<-21515 Statuses=0009 0009 04:03:52 Msec=0 True Az=136.365 Ze=-142.725 Az status=0009 Ze status=0009 04:03:52 Check angles 04:03:52 SkyScan query 04:03:52 SkyScan query done: ret=0 az=153.915<-10261 ze=-121.755<-20117 Statuses=0009 0009 04:03:52 Msec=750 True Az=153.915 Ze=-121.755 Az status=0009 Ze status=0009 04:03:53 Check angles 04:03:53 SkyScan query 04:03:53 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.74<-18716 Statuses=0009 0009 04:03:53 Msec=1500 True Az=171.375 Ze=-100.74 Az status=0009 Ze status=0009 04:03:53 Check angles 04:03:53 SkyScan query 04:03:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.89<-17326 Statuses=0008 0009 04:03:54 Msec=2250 True Az=176.01 Ze=-79.89 Az status=0008 Ze status=0009 04:03:54 Check angles 04:03:54 SkyScan query 04:03:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.875<-15925 Statuses=0008 0009 04:03:55 Msec=3000 True Az=176.01 Ze=-58.875 Az status=0008 Ze status=0009 04:03:55 Check angles 04:03:55 SkyScan query 04:03:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:03:55 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:03:55 Message to Master queued w/err=0: serial=261757 error=0 04:04:00 Received message from Master: op=Filter serial=261758 04:04:00 Color wheel filter change from 0 to 0 04:04:00 FLIGetFilterPos err=0 currentPosition=0 04:04:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:00 Filter is already there-color wheel unchanged 04:04:01 Received message from Master: op=Shutter serial=261759 04:04:01 Shutter LASER close 04:04:01 Received message from Camera: op=State serial=261761 04:04:01 GetSingleValue result=40 Value=cccccccc 04:04:01 SkyScan query 04:04:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:04:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:01 Parameters OK 04:04:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:01 Set A/D data flow result=40 04:04:01 Set A/D channel type result=40 04:04:01 Set A/D encoding result=40 04:04:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:01 Set channel filter=0.000000e+000 result=40 04:04:01 Config A/D Result=40 04:04:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:01 Get A/D filter: -9.255963e+061 result=40 04:04:01 Get A/D value=-858993460 result=40 04:04:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:01 Parameters OK 04:04:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:01 Set A/D data flow result=40 04:04:01 Set A/D channel type result=40 04:04:01 Set A/D encoding result=40 04:04:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:01 Set channel filter=0.000000e+000 result=40 04:04:01 Config A/D Result=40 04:04:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:01 Get A/D filter: -9.255963e+061 result=40 04:04:01 Get A/D value=-858993460 result=40 04:04:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:01 Aux= 04:04:01 Message to Camera, serial 261761 queued 04:04:38 Received message from Master: op=PointingHead serial=261774 04:04:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:04:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:04:38 Point started: ret=0 04:04:38 point_skyscan result=0 04:04:39 Check angles 04:04:39 SkyScan query 04:04:40 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.915<-13461 Statuses=0009 0009 04:04:40 Msec=0 True Az=153.12 Ze=-21.915 Az status=0009 Ze status=0009 04:04:40 Check angles 04:04:40 SkyScan query 04:04:41 SkyScan query done: ret=0 az=135.645<-9043 ze=-0.9<-12060 Statuses=0009 0009 04:04:41 Msec=750 True Az=135.645 Ze=-0.9 Az status=0009 Ze status=0009 04:04:41 Check angles 04:04:41 SkyScan query 04:04:41 SkyScan query done: ret=0 az=118.125<-7875 ze=20.01<-10666 Statuses=0009 0009 04:04:41 Msec=1500 True Az=118.125 Ze=20.01 Az status=0009 Ze status=0009 04:04:41 Check angles 04:04:41 SkyScan query 04:04:42 SkyScan query done: ret=0 az=100.74<-6716 ze=41.01<-9266 Statuses=0009 0009 04:04:42 Msec=2250 True Az=100.74 Ze=41.01 Az status=0009 Ze status=0009 04:04:42 Check angles 04:04:42 SkyScan query 04:04:43 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 04:04:43 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 04:04:43 Check angles 04:04:43 SkyScan query 04:04:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:04:44 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 04:04:44 Message to Master queued w/err=0: serial=261774 error=0 04:04:49 Received message from Master: op=Filter serial=261775 04:04:49 Color wheel filter change from 0 to 0 04:04:49 FLIGetFilterPos err=0 currentPosition=0 04:04:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:49 Filter is already there-color wheel unchanged 04:04:49 Received message from Master: op=Shutter serial=261776 04:04:49 Shutter LASER close 04:04:49 Received message from Camera: op=State serial=261778 04:04:49 GetSingleValue result=40 Value=cccccccc 04:04:49 SkyScan query 04:04:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:04:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:49 Parameters OK 04:04:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:49 Set A/D data flow result=40 04:04:49 Set A/D channel type result=40 04:04:49 Set A/D encoding result=40 04:04:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:49 Set channel filter=0.000000e+000 result=40 04:04:49 Config A/D Result=40 04:04:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:49 Get A/D filter: -9.255963e+061 result=40 04:04:49 Get A/D value=-858993460 result=40 04:04:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:49 Parameters OK 04:04:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:49 Set A/D data flow result=40 04:04:49 Set A/D channel type result=40 04:04:49 Set A/D encoding result=40 04:04:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:49 Set channel filter=0.000000e+000 result=40 04:04:49 Config A/D Result=40 04:04:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:49 Get A/D filter: -9.255963e+061 result=40 04:04:49 Get A/D value=-858993460 result=40 04:04:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:49 Aux= 04:04:49 Message to Camera, serial 261778 queued 04:05:26 Received message from Master: op=PointingHead serial=261791 04:05:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:05:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:05:27 Point started: ret=0 04:05:27 point_skyscan result=0 04:05:27 Check angles 04:05:27 SkyScan query 04:05:28 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 04:05:28 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 04:05:28 Check angles 04:05:28 SkyScan query 04:05:29 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 04:05:29 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 04:05:29 Check angles 04:05:29 SkyScan query 04:05:29 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 04:05:29 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 04:05:30 Check angles 04:05:30 SkyScan query 04:05:30 SkyScan query done: ret=0 az=162.165<-10811 ze=38.505<-9433 Statuses=0009 0008 04:05:30 Msec=2250 True Az=162.165 Ze=38.505 Az status=0009 Ze status=0008 04:05:30 Check angles 04:05:30 SkyScan query 04:05:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 04:05:31 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 04:05:31 Check angles 04:05:31 SkyScan query 04:05:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:05:32 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 04:05:32 Message to Master queued w/err=0: serial=261791 error=0 04:05:37 Received message from Master: op=Filter serial=261792 04:05:37 Color wheel filter change from 0 to 0 04:05:37 FLIGetFilterPos err=0 currentPosition=0 04:05:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:37 Filter is already there-color wheel unchanged 04:05:37 Received message from Master: op=Shutter serial=261793 04:05:37 Shutter LASER close 04:05:37 Received message from Camera: op=State serial=261795 04:05:37 GetSingleValue result=40 Value=cccccccc 04:05:37 SkyScan query 04:05:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:05:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:37 Parameters OK 04:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:37 Set A/D data flow result=40 04:05:37 Set A/D channel type result=40 04:05:37 Set A/D encoding result=40 04:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:37 Set channel filter=0.000000e+000 result=40 04:05:37 Config A/D Result=40 04:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:37 Get A/D filter: -9.255963e+061 result=40 04:05:37 Get A/D value=-858993460 result=40 04:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:37 Parameters OK 04:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:37 Set A/D data flow result=40 04:05:37 Set A/D channel type result=40 04:05:37 Set A/D encoding result=40 04:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-19 04:05:37] 04:05:37 Set channel filter=0.000000e+000 result=40 04:05:37 Config A/D Result=40 04:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:37 Get A/D filter: -9.255963e+061 result=40 04:05:37 Get A/D value=-858993460 result=40 04:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:37 Aux= 04:05:37 Message to Camera, serial 261795 queued 04:06:14 Received message from Master: op=PointingHead serial=261808 04:06:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:06:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:06:15 Point started: ret=0 04:06:15 point_skyscan result=0 04:06:15 Check angles 04:06:15 SkyScan query 04:06:16 SkyScan query done: ret=0 az=152.745<-10183 ze=8.355<-11443 Statuses=0009 0009 04:06:16 Msec=0 True Az=152.745 Ze=8.355 Az status=0009 Ze status=0009 04:06:16 Check angles 04:06:16 SkyScan query 04:06:17 SkyScan query done: ret=0 az=134.91<-8994 ze=-13.005<-12867 Statuses=0009 0009 04:06:17 Msec=750 True Az=134.91 Ze=-13.005 Az status=0009 Ze status=0009 04:06:17 Check angles 04:06:17 SkyScan query 04:06:17 SkyScan query done: ret=0 az=117.42<-7828 ze=-34.035<-14269 Statuses=0009 0009 04:06:17 Msec=1500 True Az=117.42 Ze=-34.035 Az status=0009 Ze status=0009 04:06:18 Check angles 04:06:18 SkyScan query 04:06:18 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.57<-15438 Statuses=0009 0009 04:06:18 Msec=2250 True Az=100.02 Ze=-51.57 Az status=0009 Ze status=0009 04:06:18 Check angles 04:06:18 SkyScan query 04:06:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 04:06:19 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 04:06:19 Check angles 04:06:19 SkyScan query 04:06:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:06:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:06:20 Message to Master queued w/err=0: serial=261808 error=0 04:06:25 Received message from Master: op=Filter serial=261809 04:06:25 Color wheel filter change from 0 to 0 04:06:25 FLIGetFilterPos err=0 currentPosition=0 04:06:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:25 Filter is already there-color wheel unchanged 04:06:25 Received message from Master: op=Shutter serial=261810 04:06:25 Shutter LASER close 04:06:25 Received message from Camera: op=State serial=261812 04:06:25 GetSingleValue result=40 Value=cccccccc 04:06:25 SkyScan query 04:06:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:06:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:26 Parameters OK 04:06:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:26 Set A/D data flow result=40 04:06:26 Set A/D channel type result=40 04:06:26 Set A/D encoding result=40 04:06:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:26 Set channel filter=0.000000e+000 result=40 04:06:26 Config A/D Result=40 04:06:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:26 Get A/D filter: -9.255963e+061 result=40 04:06:26 Get A/D value=-858993460 result=40 04:06:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:26 Parameters OK 04:06:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:26 Set A/D data flow result=40 04:06:26 Set A/D channel type result=40 04:06:26 Set A/D encoding result=40 04:06:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:26 Set channel filter=0.000000e+000 result=40 04:06:26 Config A/D Result=40 04:06:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:26 Get A/D filter: -9.255963e+061 result=40 04:06:26 Get A/D value=-858993460 result=40 04:06:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:26 Aux= 04:06:26 Message to Camera, serial 261812 queued 04:07:01 Received message from Master: op=PointingHead serial=261824 04:07:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:07:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:07:02 Point started: ret=0 04:07:02 point_skyscan result=0 04:07:03 Check angles 04:07:03 SkyScan query 04:07:03 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.06<-17404 Statuses=0009 0009 04:07:03 Msec=0 True Az=108.825 Ze=-81.06 Az status=0009 Ze status=0009 04:07:03 Check angles 04:07:03 SkyScan query 04:07:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.06<-18804 Statuses=0008 0009 04:07:04 Msec=750 True Az=112.995 Ze=-102.06 Az status=0008 Ze status=0009 04:07:04 Check angles 04:07:04 SkyScan query 04:07:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 04:07:05 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 04:07:05 Check angles 04:07:05 SkyScan query 04:07:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 04:07:05 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 04:07:06 Check angles 04:07:06 SkyScan query 04:07:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 04:07:06 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 04:07:06 Check angles 04:07:06 SkyScan query 04:07:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:07:07 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:07:07 Message to Master queued w/err=0: serial=261824 error=0 04:07:12 Received message from Master: op=Filter serial=261825 04:07:12 Color wheel filter change from 0 to 0 04:07:12 FLIGetFilterPos err=0 currentPosition=0 04:07:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:12 Filter is already there-color wheel unchanged 04:07:12 Received message from Master: op=Shutter serial=261826 04:07:12 Shutter LASER open 04:07:12 Received message from Camera: op=State serial=261828 04:07:12 GetSingleValue result=40 Value=cccccccc 04:07:12 SkyScan query 04:07:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:07:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:13 Parameters OK 04:07:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:13 Set A/D data flow result=40 04:07:13 Set A/D channel type result=40 04:07:13 Set A/D encoding result=40 04:07:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:13 Set channel filter=0.000000e+000 result=40 04:07:13 Config A/D Result=40 04:07:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:13 Get A/D filter: -9.255963e+061 result=40 04:07:13 Get A/D value=-858993460 result=40 04:07:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:13 Parameters OK 04:07:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:13 Set A/D data flow result=40 04:07:13 Set A/D channel type result=40 04:07:13 Set A/D encoding result=40 04:07:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:13 Set channel filter=0.000000e+000 result=40 04:07:13 Config A/D Result=40 04:07:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:13 Get A/D filter: -9.255963e+061 result=40 04:07:13 Get A/D value=-858993460 result=40 04:07:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:13 Aux= 04:07:13 Message to Camera, serial 261828 queued 04:07:21 Received message from Master: op=Shutter serial=261838 04:07:21 Shutter LASER close 04:07:22 Received message from Master: op=PointingHead serial=261842 04:07:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:07:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:07:22 Point started: ret=0 04:07:22 point_skyscan result=0 04:07:23 Check angles 04:07:23 SkyScan query 04:07:23 SkyScan query done: ret=0 az=89.445<-5963 ze=156.72<-1552 Statuses=0009 0009 04:07:23 Msec=0 True Az=89.445 Ze=156.72 Az status=0009 Ze status=0009 04:07:24 Check angles 04:07:24 SkyScan query 04:07:24 SkyScan query done: ret=0 az=71.955<-4797 ze=135.795<-2947 Statuses=0009 0009 04:07:24 Msec=750 True Az=71.955 Ze=135.795 Az status=0009 Ze status=0009 04:07:24 Check angles 04:07:24 SkyScan query 04:07:25 SkyScan query done: ret=0 az=54.525<-3635 ze=114.795<-4347 Statuses=0009 0009 04:07:25 Msec=1500 True Az=54.525 Ze=114.795 Az status=0009 Ze status=0009 04:07:25 Check angles 04:07:25 SkyScan query 04:07:26 SkyScan query done: ret=0 az=40.98<-2732 ze=93.9<-5740 Statuses=0009 0009 04:07:26 Msec=2250 True Az=40.98 Ze=93.9 Az status=0009 Ze status=0009 04:07:26 Check angles 04:07:26 SkyScan query 04:07:26 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 04:07:26 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 04:07:27 Check angles 04:07:27 SkyScan query 04:07:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 04:07:27 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 04:07:27 Check angles 04:07:27 SkyScan query 04:07:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:07:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:07:28 Message to Master queued w/err=0: serial=261842 error=0 04:07:33 Received message from Master: op=Filter serial=261843 04:07:33 Color wheel filter change from 0 to 0 04:07:33 FLIGetFilterPos err=0 currentPosition=0 04:07:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:33 Filter is already there-color wheel unchanged 04:07:33 Received message from Master: op=Shutter serial=261844 04:07:33 Shutter LASER close 04:07:33 Received message from Camera: op=State serial=261846 04:07:33 GetSingleValue result=40 Value=cccccccc 04:07:33 SkyScan query 04:07:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:07:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:34 Parameters OK 04:07:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:34 Set A/D data flow result=40 04:07:34 Set A/D channel type result=40 04:07:34 Set A/D encoding result=40 04:07:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:34 Set channel filter=0.000000e+000 result=40 04:07:34 Config A/D Result=40 04:07:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:34 Get A/D filter: -9.255963e+061 result=40 04:07:34 Get A/D value=-858993460 result=40 04:07:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:34 Parameters OK 04:07:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:34 Set A/D data flow result=40 04:07:34 Set A/D channel type result=40 04:07:34 Set A/D encoding result=40 04:07:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:34 Set channel filter=0.000000e+000 result=40 04:07:34 Config A/D Result=40 04:07:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:34 Get A/D filter: -9.255963e+061 result=40 04:07:34 Get A/D value=-858993460 result=40 04:07:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:34 Aux= 04:07:34 Message to Camera, serial 261846 queued 04:08:11 Received message from Master: op=PointingHead serial=261859 04:08:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:08:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:08:11 Point started: ret=0 04:08:11 point_skyscan result=0 04:08:12 Check angles 04:08:12 SkyScan query 04:08:13 SkyScan query done: ret=0 az=40.995<-2733 ze=21.87<-10542 Statuses=0008 0009 04:08:13 Msec=0 True Az=40.995 Ze=21.87 Az status=0008 Ze status=0009 04:08:13 Check angles 04:08:13 SkyScan query 04:08:13 SkyScan query done: ret=0 az=40.995<-2733 ze=0.945<-11937 Statuses=0008 0009 04:08:13 Msec=750 True Az=40.995 Ze=0.945 Az status=0008 Ze status=0009 04:08:13 Check angles 04:08:13 SkyScan query 04:08:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.46<-13364 Statuses=0008 0009 04:08:14 Msec=1500 True Az=40.995 Ze=-20.46 Az status=0008 Ze status=0009 04:08:14 Check angles 04:08:14 SkyScan query 04:08:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 04:08:15 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 04:08:15 Check angles 04:08:15 SkyScan query 04:08:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:08:16 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:08:16 Message to Master queued w/err=0: serial=261859 error=0 04:08:21 Received message from Master: op=Filter serial=261860 04:08:21 Color wheel filter change from 0 to 0 04:08:21 FLIGetFilterPos err=0 currentPosition=0 04:08:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:21 Filter is already there-color wheel unchanged 04:08:21 Received message from Master: op=Shutter serial=261861 04:08:21 Shutter LASER close 04:08:21 Received message from Camera: op=State serial=261863 04:08:21 GetSingleValue result=40 Value=cccccccc 04:08:21 SkyScan query 04:08:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:08:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:21 Parameters OK 04:08:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:21 Set A/D data flow result=40 04:08:21 Set A/D channel type result=40 04:08:21 Set A/D encoding result=40 04:08:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:21 Set channel filter=0.000000e+000 result=40 04:08:21 Config A/D Result=40 04:08:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:21 Get A/D filter: -9.255963e+061 result=40 04:08:21 Get A/D value=-858993460 result=40 04:08:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:21 Parameters OK 04:08:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:21 Set A/D data flow result=40 04:08:21 Set A/D channel type result=40 04:08:21 Set A/D encoding result=40 04:08:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:21 Set channel filter=0.000000e+000 result=40 04:08:21 Config A/D Result=40 04:08:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:21 Get A/D filter: -9.255963e+061 result=40 04:08:21 Get A/D value=-858993460 result=40 04:08:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:21 Aux= 04:08:21 Message to Camera, serial 261863 queued 04:08:58 Received message from Master: op=PointingHead serial=261876 04:08:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:08:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:08:59 Point started: ret=0 04:08:59 point_skyscan result=0 04:08:59 Check angles 04:08:59 SkyScan query 04:09:00 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.385<-16559 Statuses=0009 0009 04:09:00 Msec=0 True Az=64.05 Ze=-68.385 Az status=0009 Ze status=0009 04:09:00 Check angles 04:09:00 SkyScan query 04:09:01 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.37<-17958 Statuses=0009 0009 04:09:01 Msec=750 True Az=81.54 Ze=-89.37 Az status=0009 Ze status=0009 04:09:01 Check angles 04:09:01 SkyScan query 04:09:01 SkyScan query done: ret=0 az=98.94<-6596 ze=-110.31<-19354 Statuses=0009 0009 04:09:01 Msec=1500 True Az=98.94 Ze=-110.31 Az status=0009 Ze status=0009 04:09:02 Check angles 04:09:02 SkyScan query 04:09:02 SkyScan query done: ret=0 az=116.385<-7759 ze=-131.25<-20750 Statuses=0009 0009 04:09:02 Msec=2250 True Az=116.385 Ze=-131.25 Az status=0009 Ze status=0009 04:09:02 Check angles 04:09:02 SkyScan query 04:09:03 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 04:09:03 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 04:09:03 Check angles 04:09:03 SkyScan query 04:09:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 04:09:04 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 04:09:04 Message to Master queued w/err=0: serial=261876 error=0 04:09:09 Received message from Master: op=Filter serial=261877 04:09:09 Color wheel filter change from 0 to 0 04:09:09 FLIGetFilterPos err=0 currentPosition=0 04:09:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:09 Filter is already there-color wheel unchanged 04:09:09 Received message from Master: op=Shutter serial=261878 04:09:09 Shutter LASER close 04:09:09 Received message from Camera: op=State serial=261880 04:09:09 GetSingleValue result=40 Value=cccccccc 04:09:09 SkyScan query 04:09:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:09:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:09 Parameters OK 04:09:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:09 Set A/D data flow result=40 04:09:09 Set A/D channel type result=40 04:09:09 Set A/D encoding result=40 04:09:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:09 Set channel filter=0.000000e+000 result=40 04:09:09 Config A/D Result=40 04:09:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:09 Get A/D filter: -9.255963e+061 result=40 04:09:09 Get A/D value=-858993460 result=40 04:09:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:09 Parameters OK 04:09:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:09 Set A/D data flow result=40 04:09:09 Set A/D channel type result=40 04:09:09 Set A/D encoding result=40 04:09:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:09 Set channel filter=0.000000e+000 result=40 04:09:09 Config A/D Result=40 04:09:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:09 Get A/D filter: -9.255963e+061 result=40 04:09:09 Get A/D value=-858993460 result=40 04:09:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:09 Aux= 04:09:09 Message to Camera, serial 261880 queued 04:09:46 Received message from Master: op=PointingHead serial=261893 04:09:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:09:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:09:47 Point started: ret=0 04:09:47 point_skyscan result=0 04:09:47 Check angles 04:09:47 SkyScan query 04:09:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 04:09:48 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 04:09:48 Check angles 04:09:48 SkyScan query 04:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:09:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:09:49 Message to Master queued w/err=0: serial=261893 error=0 04:09:54 Received message from Master: op=Filter serial=261894 04:09:54 Color wheel filter change from 0 to 0 04:09:54 FLIGetFilterPos err=0 currentPosition=0 04:09:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:54 Filter is already there-color wheel unchanged 04:09:54 Received message from Master: op=Shutter serial=261895 04:09:54 Shutter LASER open 04:09:54 Received message from Camera: op=State serial=261897 04:09:54 GetSingleValue result=40 Value=cccccccc 04:09:54 SkyScan query 04:09:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:09:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:55 Parameters OK 04:09:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:55 Set A/D data flow result=40 04:09:55 Set A/D channel type result=40 04:09:55 Set A/D encoding result=40 04:09:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:55 Set channel filter=0.000000e+000 result=40 04:09:55 Config A/D Result=40 04:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:55 Get A/D filter: -9.255963e+061 result=40 04:09:55 Get A/D value=-858993460 result=40 04:09:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:55 Parameters OK 04:09:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:55 Set A/D data flow result=40 04:09:55 Set A/D channel type result=40 04:09:55 Set A/D encoding result=40 04:09:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:55 Set channel filter=0.000000e+000 result=40 04:09:55 Config A/D Result=40 04:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:55 Get A/D filter: -9.255963e+061 result=40 04:09:55 Get A/D value=-858993460 result=40 04:09:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:55 Aux= 04:09:55 Message to Camera, serial 261897 queued 04:10:03 Received message from Master: op=Shutter serial=261907 04:10:03 Shutter LASER close 04:10:04 Received message from Master: op=PointingHead serial=261911 04:10:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:10:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:10:04 Point started: ret=0 04:10:04 point_skyscan result=0 04:10:05 Check angles 04:10:05 SkyScan query 04:10:05 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.085<-21539 Statuses=0009 0009 04:10:05 Msec=0 True Az=136.17 Ze=-143.085 Az status=0009 Ze status=0009 04:10:06 Check angles 04:10:06 SkyScan query 04:10:06 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.07<-20138 Statuses=0009 0009 04:10:06 Msec=750 True Az=153.66 Ze=-122.07 Az status=0009 Ze status=0009 04:10:06 Check angles 04:10:06 SkyScan query 04:10:07 SkyScan query done: ret=0 az=171.15<-11410 ze=-101.16<-18744 Statuses=0009 0009 04:10:07 Msec=1500 True Az=171.15 Ze=-101.16 Az status=0009 Ze status=0009 04:10:07 Check angles 04:10:07 SkyScan query 04:10:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 04:10:08 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 04:10:08 Check angles 04:10:08 SkyScan query 04:10:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.235<-15949 Statuses=0008 0009 04:10:08 Msec=3000 True Az=176.01 Ze=-59.235 Az status=0008 Ze status=0009 04:10:09 Check angles 04:10:09 SkyScan query 04:10:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:10:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:10:09 Message to Master queued w/err=0: serial=261911 error=0 04:10:14 Received message from Master: op=Filter serial=261912 04:10:14 Color wheel filter change from 0 to 0 04:10:14 FLIGetFilterPos err=0 currentPosition=0 04:10:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:14 Filter is already there-color wheel unchanged 04:10:14 Received message from Master: op=Shutter serial=261913 04:10:14 Shutter LASER close 04:10:14 Received message from Camera: op=State serial=261915 04:10:14 GetSingleValue result=40 Value=cccccccc 04:10:14 SkyScan query 04:10:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:10:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:15 Parameters OK 04:10:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:15 Set A/D data flow result=40 04:10:15 Set A/D channel type result=40 04:10:15 Set A/D encoding result=40 04:10:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:15 Set channel filter=0.000000e+000 result=40 04:10:15 Config A/D Result=40 04:10:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:15 Get A/D filter: -9.255963e+061 result=40 04:10:15 Get A/D value=-858993460 result=40 04:10:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:15 Parameters OK 04:10:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:15 Set A/D data flow result=40 04:10:15 Set A/D channel type result=40 04:10:15 Set A/D encoding result=40 04:10:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:15 Set channel filter=0.000000e+000 result=40 04:10:15 Config A/D Result=40 04:10:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:15 Get A/D filter: -9.255963e+061 result=40 04:10:15 Get A/D value=-858993460 result=40 04:10:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:15 Aux= 04:10:15 Message to Camera, serial 261915 queued 04:10:52 Received message from Master: op=PointingHead serial=261928 04:10:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:10:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:10:52 Point started: ret=0 04:10:52 point_skyscan result=0 04:10:53 Check angles 04:10:53 SkyScan query 04:10:54 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.81<-13454 Statuses=0009 0009 04:10:54 Msec=0 True Az=152.97 Ze=-21.81 Az status=0009 Ze status=0009 04:10:54 Check angles 04:10:54 SkyScan query 04:10:54 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.81<-12054 Statuses=0009 0009 04:10:54 Msec=750 True Az=135.57 Ze=-0.81 Az status=0009 Ze status=0009 04:10:54 Check angles 04:10:54 SkyScan query 04:10:55 SkyScan query done: ret=0 az=118.095<-7873 ze=20.1<-10660 Statuses=0009 0009 04:10:55 Msec=1500 True Az=118.095 Ze=20.1 Az status=0009 Ze status=0009 04:10:55 Check angles 04:10:55 SkyScan query 04:10:56 SkyScan query done: ret=0 az=100.575<-6705 ze=41.115<-9259 Statuses=0009 0009 04:10:56 Msec=2250 True Az=100.575 Ze=41.115 Az status=0009 Ze status=0009 04:10:56 Check angles 04:10:56 SkyScan query 04:10:57 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 04:10:57 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 04:10:57 Check angles 04:10:57 SkyScan query 04:10:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:10:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:10:57 Message to Master queued w/err=0: serial=261928 error=0 04:11:02 Received message from Master: op=Filter serial=261929 04:11:02 Color wheel filter change from 0 to 0 04:11:02 FLIGetFilterPos err=0 currentPosition=0 04:11:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:02 Filter is already there-color wheel unchanged 04:11:02 Received message from Master: op=Shutter serial=261930 04:11:02 Shutter LASER close 04:11:03 Received message from Camera: op=State serial=261932 04:11:03 GetSingleValue result=40 Value=cccccccc 04:11:03 SkyScan query 04:11:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:11:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:03 Parameters OK 04:11:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:03 Set A/D data flow result=40 04:11:03 Set A/D channel type result=40 04:11:03 Set A/D encoding result=40 04:11:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:03 Set channel filter=0.000000e+000 result=40 04:11:03 Config A/D Result=40 04:11:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:03 Get A/D filter: -9.255963e+061 result=40 04:11:03 Get A/D value=-858993460 result=40 04:11:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:03 Parameters OK 04:11:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:03 Set A/D data flow result=40 04:11:03 Set A/D channel type result=40 04:11:03 Set A/D encoding result=40 04:11:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:03 Set channel filter=0.000000e+000 result=40 04:11:03 Config A/D Result=40 04:11:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:03 Get A/D filter: -9.255963e+061 result=40 04:11:03 Get A/D value=-858993460 result=40 04:11:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:03 Aux= 04:11:03 Message to Camera, serial 261932 queued 04:11:40 Received message from Master: op=PointingHead serial=261945 04:11:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:11:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:11:40 Point started: ret=0 04:11:40 point_skyscan result=0 04:11:41 Check angles 04:11:41 SkyScan query 04:11:42 SkyScan query done: ret=0 az=85.995<-5733 ze=21.735<-10551 Statuses=0008 0009 04:11:42 Msec=0 True Az=85.995 Ze=21.735 Az status=0008 Ze status=0009 04:11:42 Check angles 04:11:42 SkyScan query 04:11:42 SkyScan query done: ret=0 az=85.995<-5733 ze=0.825<-11945 Statuses=0008 0009 04:11:42 Msec=750 True Az=85.995 Ze=0.825 Az status=0008 Ze status=0009 04:11:43 Check angles 04:11:43 SkyScan query 04:11:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.565<-13371 Statuses=0008 0009 04:11:43 Msec=1500 True Az=85.995 Ze=-20.565 Az status=0008 Ze status=0009 04:11:43 Check angles 04:11:43 SkyScan query 04:11:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.46<-14764 Statuses=0008 0009 04:11:44 Msec=2250 True Az=85.995 Ze=-41.46 Az status=0008 Ze status=0009 04:11:44 Check angles 04:11:44 SkyScan query 04:11:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:11:45 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:11:45 Message to Master queued w/err=0: serial=261945 error=0 04:11:50 Received message from Master: op=Filter serial=261946 04:11:50 Color wheel filter change from 0 to 0 04:11:50 FLIGetFilterPos err=0 currentPosition=0 04:11:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:50 Filter is already there-color wheel unchanged 04:11:50 Received message from Master: op=Shutter serial=261947 04:11:50 Shutter LASER close 04:11:50 Received message from Camera: op=State serial=261949 04:11:50 GetSingleValue result=40 Value=cccccccc 04:11:50 SkyScan query 04:11:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:11:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:51 Parameters OK 04:11:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:51 Set A/D data flow result=40 04:11:51 Set A/D channel type result=40 04:11:51 Set A/D encoding result=40 04:11:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:51 Set channel filter=0.000000e+000 result=40 04:11:51 Config A/D Result=40 04:11:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:51 Get A/D filter: -9.255963e+061 result=40 04:11:51 Get A/D value=-858993460 result=40 04:11:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:51 Parameters OK 04:11:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:51 Set A/D data flow result=40 04:11:51 Set A/D channel type result=40 04:11:51 Set A/D encoding result=40 04:11:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:51 Set channel filter=0.000000e+000 result=40 04:11:51 Config A/D Result=40 04:11:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:51 Get A/D filter: -9.255963e+061 result=40 04:11:51 Get A/D value=-858993460 result=40 04:11:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:51 Aux= 04:11:51 Message to Camera, serial 261949 queued 04:12:27 Received message from Master: op=PointingHead serial=261962 04:12:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:12:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:12:28 Point started: ret=0 04:12:28 point_skyscan result=0 04:12:29 Check angles 04:12:29 SkyScan query 04:12:29 SkyScan query done: ret=0 az=109.245<-7283 ze=-81.615<-17441 Statuses=0009 0009 04:12:29 Msec=0 True Az=109.245 Ze=-81.615 Az status=0009 Ze status=0009 04:12:29 Check angles 04:12:29 SkyScan query 04:12:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 04:12:30 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 04:12:30 Check angles 04:12:30 SkyScan query 04:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.93<-20262 Statuses=0008 0009 04:12:31 Msec=1500 True Az=112.995 Ze=-123.93 Az status=0008 Ze status=0009 04:12:31 Check angles 04:12:31 SkyScan query 04:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 04:12:31 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 04:12:32 Check angles 04:12:32 SkyScan query 04:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 04:12:32 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 04:12:32 Check angles 04:12:32 SkyScan query 04:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:12:33 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:12:33 Message to Master queued w/err=0: serial=261962 error=0 04:12:38 Received message from Master: op=Filter serial=261963 04:12:38 Color wheel filter change from 0 to 0 04:12:38 FLIGetFilterPos err=0 currentPosition=0 04:12:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:38 Filter is already there-color wheel unchanged 04:12:38 Received message from Master: op=Shutter serial=261964 04:12:38 Shutter LASER open 04:12:38 Received message from Camera: op=State serial=261966 04:12:38 GetSingleValue result=40 Value=cccccccc 04:12:38 SkyScan query 04:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:12:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:39 Parameters OK 04:12:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:39 Set A/D data flow result=40 04:12:39 Set A/D channel type result=40 04:12:39 Set A/D encoding result=40 04:12:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:39 Set channel filter=0.000000e+000 result=40 04:12:39 Config A/D Result=40 04:12:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:39 Get A/D filter: -9.255963e+061 result=40 04:12:39 Get A/D value=-858993460 result=40 04:12:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:39 Parameters OK 04:12:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:39 Set A/D data flow result=40 04:12:39 Set A/D channel type result=40 04:12:39 Set A/D encoding result=40 04:12:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:39 Set channel filter=0.000000e+000 result=40 04:12:39 Config A/D Result=40 04:12:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:39 Get A/D filter: -9.255963e+061 result=40 04:12:39 Get A/D value=-858993460 result=40 04:12:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:39 Aux= 04:12:39 Message to Camera, serial 261966 queued 04:12:46 Received message from Master: op=Shutter serial=261975 04:12:46 Shutter LASER close 04:12:47 Received message from Master: op=PointingHead serial=261979 04:12:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:12:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:12:47 Point started: ret=0 04:12:47 point_skyscan result=0 04:12:48 Check angles 04:12:48 SkyScan query 04:12:48 SkyScan query done: ret=0 az=89.61<-5974 ze=156.795<-1547 Statuses=0009 0009 04:12:48 Msec=0 True Az=89.61 Ze=156.795 Az status=0009 Ze status=0009 04:12:49 Check angles 04:12:49 SkyScan query 04:12:49 SkyScan query done: ret=0 az=71.64<-4776 ze=135.405<-2973 Statuses=0009 0009 04:12:49 Msec=750 True Az=71.64 Ze=135.405 Az status=0009 Ze status=0009 04:12:49 Check angles 04:12:49 SkyScan query 04:12:50 SkyScan query done: ret=0 az=54.255<-3617 ze=114.405<-4373 Statuses=0009 0009 04:12:50 Msec=1500 True Az=54.255 Ze=114.405 Az status=0009 Ze status=0009 04:12:50 Check angles 04:12:50 SkyScan query 04:12:51 SkyScan query done: ret=0 az=40.98<-2732 ze=93.465<-5769 Statuses=0009 0009 04:12:51 Msec=2250 True Az=40.98 Ze=93.465 Az status=0009 Ze status=0009 04:12:51 Check angles 04:12:51 SkyScan query 04:12:51 SkyScan query done: ret=0 az=40.995<-2733 ze=72.09<-7194 Statuses=0008 0009 04:12:51 Msec=3000 True Az=40.995 Ze=72.09 Az status=0008 Ze status=0009 04:12:52 Check angles 04:12:52 SkyScan query 04:12:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.96<-8536 Statuses=0008 0009 04:12:52 Msec=3750 True Az=40.995 Ze=51.96 Az status=0008 Ze status=0009 04:12:52 Check angles 04:12:52 SkyScan query 04:12:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:12:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:12:53 Message to Master queued w/err=0: serial=261979 error=0 04:12:58 Received message from Master: op=Filter serial=261980 04:12:58 Color wheel filter change from 0 to 0 04:12:58 FLIGetFilterPos err=0 currentPosition=0 04:12:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:58 Filter is already there-color wheel unchanged 04:12:58 Received message from Master: op=Shutter serial=261981 04:12:58 Shutter LASER close 04:12:58 Received message from Camera: op=State serial=261983 04:12:58 GetSingleValue result=40 Value=cccccccc 04:12:58 SkyScan query 04:12:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:12:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:59 Parameters OK 04:12:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:59 Set A/D data flow result=40 04:12:59 Set A/D channel type result=40 04:12:59 Set A/D encoding result=40 04:12:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:59 Set channel filter=0.000000e+000 result=40 04:12:59 Config A/D Result=40 04:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:59 Get A/D filter: -9.255963e+061 result=40 04:12:59 Get A/D value=-858993460 result=40 04:12:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:59 Parameters OK 04:12:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:59 Set A/D data flow result=40 04:12:59 Set A/D channel type result=40 04:12:59 Set A/D encoding result=40 04:12:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:59 Set channel filter=0.000000e+000 result=40 04:12:59 Config A/D Result=40 04:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:59 Get A/D filter: -9.255963e+061 result=40 04:12:59 Get A/D value=-858993460 result=40 04:12:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:59 Aux= 04:12:59 Message to Camera, serial 261983 queued 04:13:36 Received message from Master: op=PointingHead serial=261996 04:13:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:13:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:13:36 Point started: ret=0 04:13:36 point_skyscan result=0 04:13:37 Check angles 04:13:37 SkyScan query 04:13:38 SkyScan query done: ret=0 az=40.995<-2733 ze=21.75<-10550 Statuses=0008 0009 04:13:38 Msec=0 True Az=40.995 Ze=21.75 Az status=0008 Ze status=0009 04:13:38 Check angles 04:13:38 SkyScan query 04:13:38 SkyScan query done: ret=0 az=40.995<-2733 ze=0.78<-11948 Statuses=0008 0009 04:13:38 Msec=750 True Az=40.995 Ze=0.78 Az status=0008 Ze status=0009 04:13:38 Check angles 04:13:38 SkyScan query 04:13:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.16<-13344 Statuses=0008 0009 04:13:39 Msec=1500 True Az=40.995 Ze=-20.16 Az status=0008 Ze status=0009 04:13:39 Check angles 04:13:39 SkyScan query 04:13:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 04:13:40 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 04:13:40 Check angles 04:13:40 SkyScan query 04:13:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 04:13:41 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 04:13:41 Message to Master queued w/err=0: serial=261996 error=0 04:13:46 Received message from Master: op=Filter serial=261997 04:13:46 Color wheel filter change from 0 to 0 04:13:46 FLIGetFilterPos err=0 currentPosition=0 04:13:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:46 Filter is already there-color wheel unchanged 04:13:46 Received message from Master: op=Shutter serial=261998 04:13:46 Shutter LASER close 04:13:46 Received message from Camera: op=State serial=262000 04:13:46 GetSingleValue result=40 Value=cccccccc 04:13:46 SkyScan query 04:13:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:13:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:46 Parameters OK 04:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:46 Set A/D data flow result=40 04:13:46 Set A/D channel type result=40 04:13:46 Set A/D encoding result=40 04:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:46 Set channel filter=0.000000e+000 result=40 04:13:46 Config A/D Result=40 04:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:46 Get A/D filter: -9.255963e+061 result=40 04:13:46 Get A/D value=-858993460 result=40 04:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:46 Parameters OK 04:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:46 Set A/D data flow result=40 04:13:46 Set A/D channel type result=40 04:13:46 Set A/D encoding result=40 04:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:46 Set channel filter=0.000000e+000 result=40 04:13:46 Config A/D Result=40 04:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:46 Get A/D filter: -9.255963e+061 result=40 04:13:46 Get A/D value=-858993460 result=40 04:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:46 Aux= 04:13:46 Message to Camera, serial 262000 queued 04:14:23 Received message from Master: op=PointingHead serial=262013 04:14:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:14:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:14:24 Point started: ret=0 04:14:24 point_skyscan result=0 04:14:24 Check angles 04:14:24 SkyScan query 04:14:25 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.175<-16545 Statuses=0009 0009 04:14:25 Msec=0 True Az=63.915 Ze=-68.175 Az status=0009 Ze status=0009 04:14:25 Check angles 04:14:25 SkyScan query 04:14:26 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.58<-17972 Statuses=0009 0009 04:14:26 Msec=750 True Az=81.66 Ze=-89.58 Az status=0009 Ze status=0009 04:14:26 Check angles 04:14:26 SkyScan query 04:14:26 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.565<-19371 Statuses=0009 0009 04:14:26 Msec=1500 True Az=99.165 Ze=-110.565 Az status=0009 Ze status=0009 04:14:27 Check angles 04:14:27 SkyScan query 04:14:27 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.475<-20765 Statuses=0009 0009 04:14:27 Msec=2250 True Az=116.715 Ze=-131.475 Az status=0009 Ze status=0009 04:14:27 Check angles 04:14:27 SkyScan query 04:14:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 04:14:28 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 04:14:28 Check angles 04:14:28 SkyScan query 04:14:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 04:14:29 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 04:14:29 Message to Master queued w/err=0: serial=262013 error=0 04:14:34 Received message from Master: op=Filter serial=262014 04:14:34 Color wheel filter change from 0 to 0 04:14:34 FLIGetFilterPos err=0 currentPosition=0 04:14:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:34 Filter is already there-color wheel unchanged 04:14:34 Received message from Master: op=Shutter serial=262015 04:14:34 Shutter LASER close 04:14:34 Received message from Camera: op=State serial=262017 04:14:34 GetSingleValue result=40 Value=cccccccc 04:14:34 SkyScan query 04:14:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:14:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:34 Parameters OK 04:14:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:34 Set A/D data flow result=40 04:14:34 Set A/D channel type result=40 04:14:34 Set A/D encoding result=40 04:14:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:34 Set channel filter=0.000000e+000 result=40 04:14:34 Config A/D Result=40 04:14:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:34 Get A/D filter: -9.255963e+061 result=40 04:14:34 Get A/D value=-858993460 result=40 04:14:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:34 Parameters OK 04:14:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:34 Set A/D data flow result=40 04:14:34 Set A/D channel type result=40 04:14:34 Set A/D encoding result=40 04:14:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:34 Set channel filter=0.000000e+000 result=40 04:14:34 Config A/D Result=40 04:14:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:34 Get A/D filter: -9.255963e+061 result=40 04:14:34 Get A/D value=-858993460 result=40 04:14:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:34 Aux= 04:14:34 Message to Camera, serial 262017 queued 04:15:11 Received message from Master: op=PointingHead serial=262030 04:15:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:15:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:15:12 Point started: ret=0 04:15:12 point_skyscan result=0 04:15:12 Check angles 04:15:12 SkyScan query 04:15:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 04:15:13 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 04:15:13 Check angles 04:15:13 SkyScan query 04:15:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:15:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:15:14 Message to Master queued w/err=0: serial=262030 error=0 04:15:19 Received message from Master: op=Filter serial=262031 04:15:19 Color wheel filter change from 0 to 0 04:15:19 FLIGetFilterPos err=0 currentPosition=0 04:15:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:19 Filter is already there-color wheel unchanged 04:15:19 Received message from Master: op=Shutter serial=262032 04:15:19 Shutter LASER open 04:15:19 Received message from Camera: op=State serial=262034 04:15:19 GetSingleValue result=40 Value=cccccccc 04:15:19 SkyScan query 04:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:15:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:20 Parameters OK 04:15:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:20 Set A/D data flow result=40 04:15:20 Set A/D channel type result=40 04:15:20 Set A/D encoding result=40 04:15:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:20 Set channel filter=0.000000e+000 result=40 04:15:20 Config A/D Result=40 04:15:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:20 Get A/D filter: -9.255963e+061 result=40 04:15:20 Get A/D value=-858993460 result=40 04:15:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:20 Parameters OK 04:15:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:20 Set A/D data flow result=40 04:15:20 Set A/D channel type result=40 04:15:20 Set A/D encoding result=40 04:15:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:20 Set channel filter=0.000000e+000 result=40 04:15:20 Config A/D Result=40 04:15:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:20 Get A/D filter: -9.255963e+061 result=40 04:15:20 Get A/D value=-858993460 result=40 04:15:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:20 Aux= 04:15:20 Message to Camera, serial 262034 queued 04:15:27 Received message from Master: op=Identify serial=262042 04:15:28 Received message from Master: op=Shutter serial=262047 04:15:28 Shutter LASER close 04:15:29 Received message from Master: op=PointingHead serial=262051 04:15:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:15:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:15:29 Point started: ret=0 04:15:29 point_skyscan result=0 04:15:30 Check angles 04:15:30 SkyScan query 04:15:30 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.19<-21546 Statuses=0009 0009 04:15:30 Msec=0 True Az=136.095 Ze=-143.19 Az status=0009 Ze status=0009 04:15:30 Check angles 04:15:30 SkyScan query 04:15:31 SkyScan query done: ret=0 az=153.915<-10261 ze=-121.785<-20119 Statuses=0009 0009 04:15:31 Msec=750 True Az=153.915 Ze=-121.785 Az status=0009 Ze status=0009 04:15:31 Check angles 04:15:31 SkyScan query 04:15:32 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.77<-18718 Statuses=0009 0009 04:15:32 Msec=1500 True Az=171.36 Ze=-100.77 Az status=0009 Ze status=0009 04:15:32 Check angles 04:15:32 SkyScan query 04:15:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.905<-17327 Statuses=0008 0009 04:15:33 Msec=2250 True Az=176.01 Ze=-79.905 Az status=0008 Ze status=0009 04:15:33 Check angles [UTC 2018-12-19 04:15:33] 04:15:33 SkyScan query 04:15:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-56.7<-15780 Statuses=0008 0009 04:15:33 Msec=3000 True Az=176.01 Ze=-56.7 Az status=0008 Ze status=0009 04:15:33 Check angles 04:15:33 SkyScan query 04:15:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:15:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:15:34 Message to Master queued w/err=0: serial=262051 error=0 04:15:39 Received message from Master: op=Filter serial=262052 04:15:39 Color wheel filter change from 0 to 0 04:15:39 FLIGetFilterPos err=0 currentPosition=0 04:15:39 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:39 Filter is already there-color wheel unchanged 04:15:39 Received message from Master: op=Shutter serial=262053 04:15:39 Shutter LASER close 04:15:39 Received message from Camera: op=State serial=262055 04:15:39 GetSingleValue result=40 Value=cccccccc 04:15:39 SkyScan query 04:15:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:15:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:40 Parameters OK 04:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:40 Set A/D data flow result=40 04:15:40 Set A/D channel type result=40 04:15:40 Set A/D encoding result=40 04:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:40 Set channel filter=0.000000e+000 result=40 04:15:40 Config A/D Result=40 04:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:40 Get A/D filter: -9.255963e+061 result=40 04:15:40 Get A/D value=-858993460 result=40 04:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:40 Parameters OK 04:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:40 Set A/D data flow result=40 04:15:40 Set A/D channel type result=40 04:15:40 Set A/D encoding result=40 04:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:40 Set channel filter=0.000000e+000 result=40 04:15:40 Config A/D Result=40 04:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:40 Get A/D filter: -9.255963e+061 result=40 04:15:40 Get A/D value=-858993460 result=40 04:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:40 Aux= 04:15:40 Message to Camera, serial 262055 queued [UTC 2018-12-19 04:15:52] 04:16:17 Received message from Master: op=PointingHead serial=262068 04:16:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:16:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:16:17 Point started: ret=0 04:16:17 point_skyscan result=0 04:16:18 Check angles 04:16:18 SkyScan query 04:16:18 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.555<-13437 Statuses=0009 0009 04:16:18 Msec=0 True Az=152.79 Ze=-21.555 Az status=0009 Ze status=0009 04:16:19 Check angles 04:16:19 SkyScan query 04:16:19 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.6<-12040 Statuses=0009 0009 04:16:19 Msec=750 True Az=135.345 Ze=-0.6 Az status=0009 Ze status=0009 04:16:19 Check angles 04:16:19 SkyScan query 04:16:20 SkyScan query done: ret=0 az=117.885<-7859 ze=20.355<-10643 Statuses=0009 0009 04:16:20 Msec=1500 True Az=117.885 Ze=20.355 Az status=0009 Ze status=0009 04:16:20 Check angles 04:16:20 SkyScan query 04:16:21 SkyScan query done: ret=0 az=100.515<-6701 ze=41.34<-9244 Statuses=0009 0009 04:16:21 Msec=2250 True Az=100.515 Ze=41.34 Az status=0009 Ze status=0009 04:16:21 Check angles 04:16:21 SkyScan query 04:16:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 04:16:21 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 04:16:22 Check angles 04:16:22 SkyScan query 04:16:22 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 04:16:22 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 04:16:22 Message to Master queued w/err=0: serial=262068 error=0 04:16:27 Received message from Master: op=Filter serial=262069 04:16:27 Color wheel filter change from 0 to 0 04:16:27 FLIGetFilterPos err=0 currentPosition=0 04:16:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:27 Filter is already there-color wheel unchanged 04:16:27 Received message from Master: op=Shutter serial=262070 04:16:27 Shutter LASER close 04:16:27 Received message from Camera: op=State serial=262072 04:16:27 GetSingleValue result=40 Value=cccccccc 04:16:27 SkyScan query 04:16:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:16:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:28 Parameters OK 04:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:28 Set A/D data flow result=40 04:16:28 Set A/D channel type result=40 04:16:28 Set A/D encoding result=40 04:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:28 Set channel filter=0.000000e+000 result=40 04:16:28 Config A/D Result=40 04:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:28 Get A/D filter: -9.255963e+061 result=40 04:16:28 Get A/D value=-858993460 result=40 04:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:28 Parameters OK 04:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:28 Set A/D data flow result=40 04:16:28 Set A/D channel type result=40 04:16:28 Set A/D encoding result=40 04:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:28 Set channel filter=0.000000e+000 result=40 04:16:28 Config A/D Result=40 04:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:28 Get A/D filter: -9.255963e+061 result=40 04:16:28 Get A/D value=-858993460 result=40 04:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:28 Aux= 04:16:28 Message to Camera, serial 262072 queued 04:17:05 Received message from Master: op=PointingHead serial=262085 04:17:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:17:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:17:05 Point started: ret=0 04:17:05 point_skyscan result=0 04:17:06 Check angles 04:17:06 SkyScan query 04:17:07 SkyScan query done: ret=0 az=85.995<-5733 ze=21.825<-10545 Statuses=0008 0009 04:17:07 Msec=0 True Az=85.995 Ze=21.825 Az status=0008 Ze status=0009 04:17:07 Check angles 04:17:07 SkyScan query 04:17:08 SkyScan query done: ret=0 az=85.995<-5733 ze=0.915<-11939 Statuses=0008 0009 04:17:08 Msec=750 True Az=85.995 Ze=0.915 Az status=0008 Ze status=0009 04:17:08 Check angles 04:17:08 SkyScan query 04:17:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.04<-13336 Statuses=0008 0009 04:17:08 Msec=1500 True Az=85.995 Ze=-20.04 Az status=0008 Ze status=0009 04:17:08 Check angles 04:17:08 SkyScan query 04:17:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.965<-14731 Statuses=0008 0009 04:17:09 Msec=2250 True Az=85.995 Ze=-40.965 Az status=0008 Ze status=0009 04:17:09 Check angles 04:17:09 SkyScan query 04:17:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:17:10 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:17:10 Message to Master queued w/err=0: serial=262085 error=0 04:17:15 Received message from Master: op=Filter serial=262086 04:17:15 Color wheel filter change from 0 to 0 04:17:15 FLIGetFilterPos err=0 currentPosition=0 04:17:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:15 Filter is already there-color wheel unchanged 04:17:15 Received message from Master: op=Shutter serial=262087 04:17:15 Shutter LASER close 04:17:15 Received message from Camera: op=State serial=262089 04:17:15 GetSingleValue result=40 Value=cccccccc 04:17:15 SkyScan query 04:17:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:17:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:16 Parameters OK 04:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:16 Set A/D data flow result=40 04:17:16 Set A/D channel type result=40 04:17:16 Set A/D encoding result=40 04:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:16 Set channel filter=0.000000e+000 result=40 04:17:16 Config A/D Result=40 04:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:16 Get A/D filter: -9.255963e+061 result=40 04:17:16 Get A/D value=-858993460 result=40 04:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:16 Parameters OK 04:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:16 Set A/D data flow result=40 04:17:16 Set A/D channel type result=40 04:17:16 Set A/D encoding result=40 04:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:16 Set channel filter=0.000000e+000 result=40 04:17:16 Config A/D Result=40 04:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:16 Get A/D filter: -9.255963e+061 result=40 04:17:16 Get A/D value=-858993460 result=40 04:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:16 Aux= 04:17:16 Message to Camera, serial 262089 queued 04:17:52 Received message from Master: op=PointingHead serial=262102 04:17:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:17:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:17:53 Point started: ret=0 04:17:53 point_skyscan result=0 04:17:53 Check angles 04:17:53 SkyScan query 04:17:54 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.12<-17408 Statuses=0009 0009 04:17:54 Msec=0 True Az=108.9 Ze=-81.12 Az status=0009 Ze status=0009 04:17:54 Check angles 04:17:54 SkyScan query 04:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 04:17:55 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 04:17:55 Check angles 04:17:55 SkyScan query 04:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 04:17:56 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 04:17:56 Check angles 04:17:56 SkyScan query 04:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 04:17:56 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 04:17:57 Check angles 04:17:57 SkyScan query 04:17:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 04:17:57 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 04:17:57 Check angles 04:17:57 SkyScan query 04:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:17:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:17:58 Message to Master queued w/err=0: serial=262102 error=0 04:18:03 Received message from Master: op=Filter serial=262103 04:18:03 Color wheel filter change from 0 to 0 04:18:03 FLIGetFilterPos err=0 currentPosition=0 04:18:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:03 Filter is already there-color wheel unchanged 04:18:03 Received message from Master: op=Shutter serial=262104 04:18:03 Shutter LASER open 04:18:03 Received message from Camera: op=State serial=262106 04:18:03 GetSingleValue result=40 Value=cccccccc 04:18:03 SkyScan query 04:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:18:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:04 Parameters OK 04:18:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:04 Set A/D data flow result=40 04:18:04 Set A/D channel type result=40 04:18:04 Set A/D encoding result=40 04:18:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:04 Set channel filter=0.000000e+000 result=40 04:18:04 Config A/D Result=40 04:18:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:04 Get A/D filter: -9.255963e+061 result=40 04:18:04 Get A/D value=-858993460 result=40 04:18:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:04 Parameters OK 04:18:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:04 Set A/D data flow result=40 04:18:04 Set A/D channel type result=40 04:18:04 Set A/D encoding result=40 04:18:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:04 Set channel filter=0.000000e+000 result=40 04:18:04 Config A/D Result=40 04:18:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:04 Get A/D filter: -9.255963e+061 result=40 04:18:04 Get A/D value=-858993460 result=40 04:18:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:04 Aux= 04:18:04 Message to Camera, serial 262106 queued 04:18:12 Received message from Master: op=Shutter serial=262116 04:18:12 Shutter LASER close 04:18:13 Received message from Master: op=PointingHead serial=262120 04:18:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:18:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:18:13 Point started: ret=0 04:18:13 point_skyscan result=0 04:18:14 Check angles 04:18:14 SkyScan query 04:18:14 SkyScan query done: ret=0 az=89.64<-5976 ze=156.96<-1536 Statuses=0009 0009 04:18:14 Msec=0 True Az=89.64 Ze=156.96 Az status=0009 Ze status=0009 04:18:15 Check angles 04:18:15 SkyScan query 04:18:15 SkyScan query done: ret=0 az=71.76<-4784 ze=135.57<-2962 Statuses=0009 0009 04:18:15 Msec=750 True Az=71.76 Ze=135.57 Az status=0009 Ze status=0009 04:18:15 Check angles 04:18:15 SkyScan query 04:18:16 SkyScan query done: ret=0 az=54.3<-3620 ze=114.54<-4364 Statuses=0009 0009 04:18:16 Msec=1500 True Az=54.3 Ze=114.54 Az status=0009 Ze status=0009 04:18:16 Check angles 04:18:16 SkyScan query 04:18:17 SkyScan query done: ret=0 az=40.965<-2731 ze=93.66<-5756 Statuses=0009 0009 04:18:17 Msec=2250 True Az=40.965 Ze=93.66 Az status=0009 Ze status=0009 04:18:17 Check angles 04:18:17 SkyScan query 04:18:17 SkyScan query done: ret=0 az=40.995<-2733 ze=72.645<-7157 Statuses=0008 0009 04:18:17 Msec=3000 True Az=40.995 Ze=72.645 Az status=0008 Ze status=0009 04:18:18 Check angles 04:18:18 SkyScan query 04:18:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 04:18:18 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 04:18:18 Check angles 04:18:18 SkyScan query 04:18:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:18:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:18:19 Message to Master queued w/err=0: serial=262120 error=0 04:18:24 Received message from Master: op=Filter serial=262121 04:18:24 Color wheel filter change from 0 to 0 04:18:24 FLIGetFilterPos err=0 currentPosition=0 04:18:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:24 Filter is already there-color wheel unchanged 04:18:24 Received message from Master: op=Shutter serial=262122 04:18:24 Shutter LASER close 04:18:24 Received message from Camera: op=State serial=262124 04:18:24 GetSingleValue result=40 Value=cccccccc 04:18:24 SkyScan query 04:18:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:18:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:25 Parameters OK 04:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:25 Set A/D data flow result=40 04:18:25 Set A/D channel type result=40 04:18:25 Set A/D encoding result=40 04:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:25 Set channel filter=0.000000e+000 result=40 04:18:25 Config A/D Result=40 04:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:25 Get A/D filter: -9.255963e+061 result=40 04:18:25 Get A/D value=-858993460 result=40 04:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:25 Parameters OK 04:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:25 Set A/D data flow result=40 04:18:25 Set A/D channel type result=40 04:18:25 Set A/D encoding result=40 04:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:25 Set channel filter=0.000000e+000 result=40 04:18:25 Config A/D Result=40 04:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:25 Get A/D filter: -9.255963e+061 result=40 04:18:25 Get A/D value=-858993460 result=40 04:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:25 Aux= 04:18:25 Message to Camera, serial 262124 queued 04:19:02 Received message from Master: op=PointingHead serial=262137 04:19:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:19:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:19:02 Point started: ret=0 04:19:02 point_skyscan result=0 04:19:03 Check angles 04:19:03 SkyScan query 04:19:03 SkyScan query done: ret=0 az=40.995<-2733 ze=21.66<-10556 Statuses=0008 0009 04:19:03 Msec=0 True Az=40.995 Ze=21.66 Az status=0008 Ze status=0009 04:19:04 Check angles 04:19:04 SkyScan query 04:19:04 SkyScan query done: ret=0 az=40.995<-2733 ze=0.705<-11953 Statuses=0008 0009 04:19:04 Msec=750 True Az=40.995 Ze=0.705 Az status=0008 Ze status=0009 04:19:04 Check angles 04:19:04 SkyScan query 04:19:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.235<-13349 Statuses=0008 0009 04:19:05 Msec=1500 True Az=40.995 Ze=-20.235 Az status=0008 Ze status=0009 04:19:05 Check angles 04:19:05 SkyScan query 04:19:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 04:19:06 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 04:19:06 Check angles 04:19:06 SkyScan query 04:19:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:19:06 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:19:06 Message to Master queued w/err=0: serial=262137 error=0 04:19:11 Received message from Master: op=Filter serial=262138 04:19:11 Color wheel filter change from 0 to 0 04:19:11 FLIGetFilterPos err=0 currentPosition=0 04:19:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:11 Filter is already there-color wheel unchanged 04:19:12 Received message from Master: op=Shutter serial=262139 04:19:12 Shutter LASER close 04:19:12 Received message from Camera: op=State serial=262141 04:19:12 GetSingleValue result=40 Value=cccccccc 04:19:12 SkyScan query 04:19:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:19:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:12 Parameters OK 04:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:12 Set A/D data flow result=40 04:19:12 Set A/D channel type result=40 04:19:12 Set A/D encoding result=40 04:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:12 Set channel filter=0.000000e+000 result=40 04:19:12 Config A/D Result=40 04:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:12 Get A/D filter: -9.255963e+061 result=40 04:19:12 Get A/D value=-858993460 result=40 04:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:12 Parameters OK 04:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:12 Set A/D data flow result=40 04:19:12 Set A/D channel type result=40 04:19:12 Set A/D encoding result=40 04:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:12 Set channel filter=0.000000e+000 result=40 04:19:12 Config A/D Result=40 04:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:12 Get A/D filter: -9.255963e+061 result=40 04:19:12 Get A/D value=-858993460 result=40 04:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:12 Aux= 04:19:12 Message to Camera, serial 262141 queued 04:19:49 Received message from Master: op=PointingHead serial=262154 04:19:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:19:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:19:49 Point started: ret=0 04:19:49 point_skyscan result=0 04:19:50 Check angles 04:19:50 SkyScan query 04:19:51 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.37<-16558 Statuses=0009 0009 04:19:51 Msec=0 True Az=64.08 Ze=-68.37 Az status=0009 Ze status=0009 04:19:51 Check angles 04:19:51 SkyScan query 04:19:51 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.355<-17957 Statuses=0009 0009 04:19:51 Msec=750 True Az=81.33 Ze=-89.355 Az status=0009 Ze status=0009 04:19:52 Check angles 04:19:52 SkyScan query 04:19:52 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.28<-19352 Statuses=0009 0009 04:19:52 Msec=1500 True Az=99.06 Ze=-110.28 Az status=0009 Ze status=0009 04:19:52 Check angles 04:19:52 SkyScan query 04:19:53 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.67<-20778 Statuses=0009 0009 04:19:53 Msec=2250 True Az=116.805 Ze=-131.67 Az status=0009 Ze status=0009 04:19:53 Check angles 04:19:53 SkyScan query 04:19:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 04:19:54 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 04:19:54 Check angles 04:19:54 SkyScan query 04:19:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 04:19:54 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 04:19:54 Message to Master queued w/err=0: serial=262154 error=0 04:19:59 Received message from Master: op=Filter serial=262155 04:19:59 Color wheel filter change from 0 to 0 04:19:59 FLIGetFilterPos err=0 currentPosition=0 04:19:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:59 Filter is already there-color wheel unchanged 04:20:00 Received message from Master: op=Shutter serial=262156 04:20:00 Shutter LASER close 04:20:00 Received message from Camera: op=State serial=262158 04:20:00 GetSingleValue result=40 Value=cccccccc 04:20:00 SkyScan query 04:20:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:20:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:00 Parameters OK 04:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:00 Set A/D data flow result=40 04:20:00 Set A/D channel type result=40 04:20:00 Set A/D encoding result=40 04:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:00 Set channel filter=0.000000e+000 result=40 04:20:00 Config A/D Result=40 04:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:00 Get A/D filter: -9.255963e+061 result=40 04:20:00 Get A/D value=-858993460 result=40 04:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:00 Parameters OK 04:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:00 Set A/D data flow result=40 04:20:00 Set A/D channel type result=40 04:20:00 Set A/D encoding result=40 04:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:00 Set channel filter=0.000000e+000 result=40 04:20:00 Config A/D Result=40 04:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:00 Get A/D filter: -9.255963e+061 result=40 04:20:00 Get A/D value=-858993460 result=40 04:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:00 Aux= 04:20:00 Message to Camera, serial 262158 queued 04:20:37 Received message from Master: op=PointingHead serial=262171 04:20:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:20:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:20:37 Point started: ret=0 04:20:37 point_skyscan result=0 04:20:38 Check angles 04:20:38 SkyScan query 04:20:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.33<-23422 Statuses=0009 0009 04:20:39 Msec=0 True Az=113.01 Ze=-171.33 Az status=0009 Ze status=0009 04:20:39 Check angles 04:20:39 SkyScan query 04:20:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:20:40 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:20:40 Message to Master queued w/err=0: serial=262171 error=0 04:20:45 Received message from Master: op=Filter serial=262172 04:20:45 Color wheel filter change from 0 to 0 04:20:45 FLIGetFilterPos err=0 currentPosition=0 04:20:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:45 Filter is already there-color wheel unchanged 04:20:45 Received message from Master: op=Shutter serial=262173 04:20:45 Shutter LASER open 04:20:45 Received message from Camera: op=State serial=262175 04:20:45 GetSingleValue result=40 Value=cccccccc 04:20:45 SkyScan query 04:20:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:20:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:45 Parameters OK 04:20:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:45 Set A/D data flow result=40 04:20:45 Set A/D channel type result=40 04:20:45 Set A/D encoding result=40 04:20:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:45 Set channel filter=0.000000e+000 result=40 04:20:45 Config A/D Result=40 04:20:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:45 Get A/D filter: -9.255963e+061 result=40 04:20:45 Get A/D value=-858993460 result=40 04:20:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:45 Parameters OK 04:20:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:45 Set A/D data flow result=40 04:20:45 Set A/D channel type result=40 04:20:45 Set A/D encoding result=40 04:20:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:45 Set channel filter=0.000000e+000 result=40 04:20:45 Config A/D Result=40 04:20:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:45 Get A/D filter: -9.255963e+061 result=40 04:20:45 Get A/D value=-858993460 result=40 04:20:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:45 Aux= 04:20:45 Message to Camera, serial 262175 queued 04:20:54 Received message from Master: op=Shutter serial=262185 04:20:54 Shutter LASER close 04:20:55 Received message from Master: op=PointingHead serial=262189 04:20:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:20:55 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:20:55 Point started: ret=0 04:20:55 point_skyscan result=0 04:20:56 Check angles 04:20:56 SkyScan query 04:20:56 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.8<-21520 Statuses=0009 0009 04:20:56 Msec=0 True Az=136.365 Ze=-142.8 Az status=0009 Ze status=0009 04:20:56 Check angles 04:20:56 SkyScan query 04:20:57 SkyScan query done: ret=0 az=154.245<-10283 ze=-121.425<-20095 Statuses=0009 0009 04:20:57 Msec=750 True Az=154.245 Ze=-121.425 Az status=0009 Ze status=0009 04:20:57 Check angles 04:20:57 SkyScan query 04:20:58 SkyScan query done: ret=0 az=171.825<-11455 ze=-100.38<-18692 Statuses=0009 0009 04:20:58 Msec=1500 True Az=171.825 Ze=-100.38 Az status=0009 Ze status=0009 04:20:58 Check angles 04:20:58 SkyScan query 04:20:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.455<-17297 Statuses=0008 0009 04:20:58 Msec=2250 True Az=176.01 Ze=-79.455 Az status=0008 Ze status=0009 04:20:59 Check angles 04:20:59 SkyScan query 04:20:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.47<-15898 Statuses=0008 0009 04:20:59 Msec=3000 True Az=176.01 Ze=-58.47 Az status=0008 Ze status=0009 04:20:59 Check angles 04:20:59 SkyScan query 04:21:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 04:21:00 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 04:21:00 Message to Master queued w/err=0: serial=262189 error=0 04:21:05 Received message from Master: op=Filter serial=262190 04:21:05 Color wheel filter change from 0 to 0 04:21:05 FLIGetFilterPos err=0 currentPosition=0 04:21:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:05 Filter is already there-color wheel unchanged 04:21:05 Received message from Master: op=Shutter serial=262191 04:21:05 Shutter LASER close 04:21:05 Received message from Camera: op=State serial=262193 04:21:05 GetSingleValue result=40 Value=cccccccc 04:21:05 SkyScan query 04:21:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:21:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:06 Parameters OK 04:21:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:06 Set A/D data flow result=40 04:21:06 Set A/D channel type result=40 04:21:06 Set A/D encoding result=40 04:21:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:06 Set channel filter=0.000000e+000 result=40 04:21:06 Config A/D Result=40 04:21:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:06 Get A/D filter: -9.255963e+061 result=40 04:21:06 Get A/D value=-858993460 result=40 04:21:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:06 Parameters OK 04:21:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:06 Set A/D data flow result=40 04:21:06 Set A/D channel type result=40 04:21:06 Set A/D encoding result=40 04:21:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:06 Set channel filter=0.000000e+000 result=40 04:21:06 Config A/D Result=40 04:21:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:06 Get A/D filter: -9.255963e+061 result=40 04:21:06 Get A/D value=-858993460 result=40 04:21:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:06 Aux= 04:21:06 Message to Camera, serial 262193 queued 04:21:43 Received message from Master: op=PointingHead serial=262206 04:21:43 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:21:43 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:21:43 Point started: ret=0 04:21:43 point_skyscan result=0 04:21:44 Check angles 04:21:44 SkyScan query 04:21:44 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.78<-13452 Statuses=0009 0009 04:21:44 Msec=0 True Az=152.97 Ze=-21.78 Az status=0009 Ze status=0009 04:21:45 Check angles 04:21:45 SkyScan query 04:21:45 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.765<-12051 Statuses=0009 0009 04:21:45 Msec=750 True Az=135.405 Ze=-0.765 Az status=0009 Ze status=0009 04:21:45 Check angles 04:21:45 SkyScan query 04:21:46 SkyScan query done: ret=0 az=117.66<-7844 ze=20.625<-10625 Statuses=0009 0009 04:21:46 Msec=1500 True Az=117.66 Ze=20.625 Az status=0009 Ze status=0009 04:21:46 Check angles 04:21:46 SkyScan query 04:21:47 SkyScan query done: ret=0 az=99.825<-6655 ze=42<-9200 Statuses=0009 0009 04:21:47 Msec=2250 True Az=99.825 Ze=42 Az status=0009 Ze status=0009 04:21:47 Check angles 04:21:47 SkyScan query 04:21:47 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 04:21:47 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 04:21:48 Check angles 04:21:48 SkyScan query 04:21:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:21:48 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 04:21:48 Message to Master queued w/err=0: serial=262206 error=0 04:21:53 Received message from Master: op=Filter serial=262207 04:21:53 Color wheel filter change from 0 to 0 04:21:53 FLIGetFilterPos err=0 currentPosition=0 04:21:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:53 Filter is already there-color wheel unchanged 04:21:53 Received message from Master: op=Shutter serial=262208 04:21:53 Shutter LASER close 04:21:54 Received message from Camera: op=State serial=262210 04:21:54 GetSingleValue result=40 Value=cccccccc 04:21:54 SkyScan query 04:21:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:21:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:54 Parameters OK 04:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:54 Set A/D data flow result=40 04:21:54 Set A/D channel type result=40 04:21:54 Set A/D encoding result=40 04:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:54 Set channel filter=0.000000e+000 result=40 04:21:54 Config A/D Result=40 04:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:54 Get A/D filter: -9.255963e+061 result=40 04:21:54 Get A/D value=-858993460 result=40 04:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:54 Parameters OK 04:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:54 Set A/D data flow result=40 04:21:54 Set A/D channel type result=40 04:21:54 Set A/D encoding result=40 04:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:54 Set channel filter=0.000000e+000 result=40 04:21:54 Config A/D Result=40 04:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:54 Get A/D filter: -9.255963e+061 result=40 04:21:54 Get A/D value=-858993460 result=40 04:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:54 Aux= 04:21:54 Message to Camera, serial 262210 queued 04:22:31 Received message from Master: op=PointingHead serial=262223 04:22:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:22:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:22:31 Point started: ret=0 04:22:31 point_skyscan result=0 04:22:32 Check angles 04:22:32 SkyScan query 04:22:33 SkyScan query done: ret=0 az=85.995<-5733 ze=21.495<-10567 Statuses=0008 0009 04:22:33 Msec=0 True Az=85.995 Ze=21.495 Az status=0008 Ze status=0009 04:22:33 Check angles 04:22:33 SkyScan query 04:22:33 SkyScan query done: ret=0 az=86.01<-5734 ze=0.12<-11992 Statuses=0008 0009 04:22:33 Msec=750 True Az=86.01 Ze=0.12 Az status=0008 Ze status=0009 04:22:34 Check angles 04:22:34 SkyScan query 04:22:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.835<-13389 Statuses=0008 0009 04:22:34 Msec=1500 True Az=85.995 Ze=-20.835 Az status=0008 Ze status=0009 04:22:34 Check angles 04:22:34 SkyScan query 04:22:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.745<-14783 Statuses=0008 0009 04:22:35 Msec=2250 True Az=85.995 Ze=-41.745 Az status=0008 Ze status=0009 04:22:35 Check angles 04:22:35 SkyScan query 04:22:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:22:36 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:22:36 Message to Master queued w/err=0: serial=262223 error=0 04:22:41 Received message from Master: op=Filter serial=262224 04:22:41 Color wheel filter change from 0 to 0 04:22:41 FLIGetFilterPos err=0 currentPosition=0 04:22:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:41 Filter is already there-color wheel unchanged 04:22:41 Received message from Master: op=Shutter serial=262225 04:22:41 Shutter LASER close 04:22:41 Received message from Camera: op=State serial=262227 04:22:41 GetSingleValue result=40 Value=cccccccc 04:22:41 SkyScan query 04:22:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:22:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:42 Parameters OK 04:22:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:42 Set A/D data flow result=40 04:22:42 Set A/D channel type result=40 04:22:42 Set A/D encoding result=40 04:22:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:42 Set channel filter=0.000000e+000 result=40 04:22:42 Config A/D Result=40 04:22:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:42 Get A/D filter: -9.255963e+061 result=40 04:22:42 Get A/D value=-858993460 result=40 04:22:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:42 Parameters OK 04:22:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:42 Set A/D data flow result=40 04:22:42 Set A/D channel type result=40 04:22:42 Set A/D encoding result=40 04:22:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:42 Set channel filter=0.000000e+000 result=40 04:22:42 Config A/D Result=40 04:22:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:42 Get A/D filter: -9.255963e+061 result=40 04:22:42 Get A/D value=-858993460 result=40 04:22:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:42 Aux= 04:22:42 Message to Camera, serial 262227 queued 04:23:18 Received message from Master: op=PointingHead serial=262240 04:23:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:23:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:23:19 Point started: ret=0 04:23:19 point_skyscan result=0 04:23:19 Check angles 04:23:19 SkyScan query 04:23:20 SkyScan query done: ret=0 az=109.41<-7294 ze=-81.81<-17454 Statuses=0009 0009 04:23:20 Msec=0 True Az=109.41 Ze=-81.81 Az status=0009 Ze status=0009 04:23:20 Check angles 04:23:20 SkyScan query 04:23:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.155<-18877 Statuses=0008 0009 04:23:21 Msec=750 True Az=112.995 Ze=-103.155 Az status=0008 Ze status=0009 04:23:21 Check angles 04:23:21 SkyScan query 04:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.11<-20274 Statuses=0008 0009 04:23:22 Msec=1500 True Az=112.995 Ze=-124.11 Az status=0008 Ze status=0009 04:23:22 Check angles 04:23:22 SkyScan query 04:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.035<-21669 Statuses=0008 0009 04:23:22 Msec=2250 True Az=112.995 Ze=-145.035 Az status=0008 Ze status=0009 04:23:22 Check angles 04:23:22 SkyScan query 04:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 04:23:23 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 04:23:23 Check angles 04:23:23 SkyScan query 04:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:23:24 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:23:24 Message to Master queued w/err=0: serial=262240 error=0 04:23:29 Received message from Master: op=Filter serial=262241 04:23:29 Color wheel filter change from 0 to 0 04:23:29 FLIGetFilterPos err=0 currentPosition=0 04:23:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:29 Filter is already there-color wheel unchanged 04:23:29 Received message from Master: op=Shutter serial=262242 04:23:29 Shutter LASER open 04:23:29 Received message from Camera: op=State serial=262244 04:23:29 GetSingleValue result=40 Value=cccccccc 04:23:29 SkyScan query 04:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:23:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:30 Parameters OK 04:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:30 Set A/D data flow result=40 04:23:30 Set A/D channel type result=40 04:23:30 Set A/D encoding result=40 04:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:30 Set channel filter=0.000000e+000 result=40 04:23:30 Config A/D Result=40 04:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:30 Get A/D filter: -9.255963e+061 result=40 04:23:30 Get A/D value=-858993460 result=40 04:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:30 Parameters OK 04:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:30 Set A/D data flow result=40 04:23:30 Set A/D channel type result=40 04:23:30 Set A/D encoding result=40 04:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:30 Set channel filter=0.000000e+000 result=40 04:23:30 Config A/D Result=40 04:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:30 Get A/D filter: -9.255963e+061 result=40 04:23:30 Get A/D value=-858993460 result=40 04:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:30 Aux= 04:23:30 Message to Camera, serial 262244 queued 04:23:38 Received message from Master: op=Shutter serial=262254 04:23:38 Shutter LASER close 04:23:39 Received message from Master: op=PointingHead serial=262258 04:23:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:23:39 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:23:39 Point started: ret=0 04:23:39 point_skyscan result=0 04:23:40 Check angles 04:23:40 SkyScan query 04:23:40 SkyScan query done: ret=0 az=90.15<-6010 ze=157.53<-1498 Statuses=0009 0009 04:23:40 Msec=0 True Az=90.15 Ze=157.53 Az status=0009 Ze status=0009 04:23:40 Check angles 04:23:40 SkyScan query 04:23:41 SkyScan query done: ret=0 az=72.69<-4846 ze=136.485<-2901 Statuses=0009 0009 04:23:41 Msec=750 True Az=72.69 Ze=136.485 Az status=0009 Ze status=0009 04:23:41 Check angles 04:23:41 SkyScan query 04:23:42 SkyScan query done: ret=0 az=55.245<-3683 ze=115.65<-4290 Statuses=0009 0009 04:23:42 Msec=1500 True Az=55.245 Ze=115.65 Az status=0009 Ze status=0009 04:23:42 Check angles 04:23:42 SkyScan query 04:23:43 SkyScan query done: ret=0 az=41.025<-2735 ze=94.665<-5689 Statuses=0009 0009 04:23:43 Msec=2250 True Az=41.025 Ze=94.665 Az status=0009 Ze status=0009 04:23:43 Check angles 04:23:43 SkyScan query 04:23:43 SkyScan query done: ret=0 az=40.995<-2733 ze=73.74<-7084 Statuses=0008 0009 04:23:43 Msec=3000 True Az=40.995 Ze=73.74 Az status=0008 Ze status=0009 04:23:43 Check angles 04:23:43 SkyScan query 04:23:44 SkyScan query done: ret=0 az=40.995<-2733 ze=53.055<-8463 Statuses=0008 0009 04:23:44 Msec=3750 True Az=40.995 Ze=53.055 Az status=0008 Ze status=0009 04:23:44 Check angles 04:23:44 SkyScan query 04:23:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:23:45 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:23:45 Message to Master queued w/err=0: serial=262258 error=0 04:23:50 Received message from Master: op=Filter serial=262259 04:23:50 Color wheel filter change from 0 to 0 04:23:50 FLIGetFilterPos err=0 currentPosition=0 04:23:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:50 Filter is already there-color wheel unchanged 04:23:50 Received message from Master: op=Shutter serial=262260 04:23:50 Shutter LASER close 04:23:50 Received message from Camera: op=State serial=262262 04:23:50 GetSingleValue result=40 Value=cccccccc 04:23:50 SkyScan query 04:23:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:23:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:51 Parameters OK 04:23:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:51 Set A/D data flow result=40 04:23:51 Set A/D channel type result=40 04:23:51 Set A/D encoding result=40 04:23:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:51 Set channel filter=0.000000e+000 result=40 04:23:51 Config A/D Result=40 04:23:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:51 Get A/D filter: -9.255963e+061 result=40 04:23:51 Get A/D value=-858993460 result=40 04:23:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:51 Parameters OK 04:23:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:51 Set A/D data flow result=40 04:23:51 Set A/D channel type result=40 04:23:51 Set A/D encoding result=40 04:23:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:51 Set channel filter=0.000000e+000 result=40 04:23:51 Config A/D Result=40 04:23:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:51 Get A/D filter: -9.255963e+061 result=40 04:23:51 Get A/D value=-858993460 result=40 04:23:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:51 Aux= 04:23:51 Message to Camera, serial 262262 queued 04:24:28 Received message from Master: op=PointingHead serial=262275 04:24:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:24:28 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:24:28 Point started: ret=0 04:24:28 point_skyscan result=0 04:24:29 Check angles 04:24:29 SkyScan query 04:24:29 SkyScan query done: ret=0 az=40.98<-2732 ze=21.9<-10540 Statuses=0008 0009 04:24:29 Msec=0 True Az=40.98 Ze=21.9 Az status=0008 Ze status=0009 04:24:29 Check angles 04:24:29 SkyScan query 04:24:30 SkyScan query done: ret=0 az=40.995<-2733 ze=0.495<-11967 Statuses=0008 0009 04:24:30 Msec=750 True Az=40.995 Ze=0.495 Az status=0008 Ze status=0009 04:24:30 Check angles 04:24:30 SkyScan query 04:24:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.895<-13393 Statuses=0008 0009 04:24:31 Msec=1500 True Az=40.995 Ze=-20.895 Az status=0008 Ze status=0009 04:24:31 Check angles 04:24:31 SkyScan query 04:24:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 04:24:32 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 04:24:32 Check angles 04:24:32 SkyScan query 04:24:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:24:32 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:24:32 Message to Master queued w/err=0: serial=262275 error=0 04:24:37 Received message from Master: op=Filter serial=262276 04:24:37 Color wheel filter change from 0 to 0 04:24:37 FLIGetFilterPos err=0 currentPosition=0 04:24:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:37 Filter is already there-color wheel unchanged 04:24:37 Received message from Master: op=Shutter serial=262277 04:24:37 Shutter LASER close 04:24:38 Received message from Camera: op=State serial=262279 04:24:38 GetSingleValue result=40 Value=cccccccc 04:24:38 SkyScan query 04:24:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:24:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:38 Parameters OK 04:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:38 Set A/D data flow result=40 04:24:38 Set A/D channel type result=40 04:24:38 Set A/D encoding result=40 04:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:38 Set channel filter=0.000000e+000 result=40 04:24:38 Config A/D Result=40 04:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:38 Get A/D filter: -9.255963e+061 result=40 04:24:38 Get A/D value=-858993460 result=40 04:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:38 Parameters OK 04:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:38 Set A/D data flow result=40 04:24:38 Set A/D channel type result=40 04:24:38 Set A/D encoding result=40 04:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:38 Set channel filter=0.000000e+000 result=40 04:24:38 Config A/D Result=40 04:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:38 Get A/D filter: -9.255963e+061 result=40 04:24:38 Get A/D value=-858993460 result=40 04:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:38 Aux= 04:24:38 Message to Camera, serial 262279 queued 04:25:15 Received message from Master: op=PointingHead serial=262292 04:25:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:25:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:25:15 Point started: ret=0 04:25:15 point_skyscan result=0 04:25:16 Check angles 04:25:16 SkyScan query 04:25:17 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.13<-16542 Statuses=0009 0009 04:25:17 Msec=0 True Az=63.84 Ze=-68.13 Az status=0009 Ze status=0009 04:25:17 Check angles 04:25:17 SkyScan query 04:25:17 SkyScan query done: ret=0 az=81.18<-5412 ze=-89.115<-17941 Statuses=0009 0009 04:25:17 Msec=750 True Az=81.18 Ze=-89.115 Az status=0009 Ze status=0009 04:25:18 Check angles 04:25:18 SkyScan query 04:25:18 SkyScan query done: ret=0 az=98.775<-6585 ze=-110.025<-19335 Statuses=0009 0009 04:25:18 Msec=1500 True Az=98.775 Ze=-110.025 Az status=0009 Ze status=0009 04:25:18 Check angles 04:25:18 SkyScan query 04:25:19 SkyScan query done: ret=0 az=116.145<-7743 ze=-131.01<-20734 Statuses=0009 0009 04:25:19 Msec=2250 True Az=116.145 Ze=-131.01 Az status=0009 Ze status=0009 04:25:19 Check angles 04:25:19 SkyScan query 04:25:20 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.555<-21437 Statuses=0009 0008 04:25:20 Msec=3000 True Az=130.98 Ze=-141.555 Az status=0009 Ze status=0008 04:25:20 Check angles 04:25:20 SkyScan query 04:25:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:25:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:25:20 Message to Master queued w/err=0: serial=262292 error=0 04:25:25 Received message from Master: op=Filter serial=262293 04:25:25 Color wheel filter change from 0 to 0 04:25:25 FLIGetFilterPos err=0 currentPosition=0 04:25:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:25 Filter is already there-color wheel unchanged 04:25:26 Received message from Master: op=Shutter serial=262294 04:25:26 Shutter LASER close 04:25:26 Received message from Camera: op=State serial=262296 04:25:26 GetSingleValue result=40 Value=cccccccc 04:25:26 SkyScan query 04:25:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:25:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:26 Parameters OK 04:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:26 Set A/D data flow result=40 04:25:26 Set A/D channel type result=40 04:25:26 Set A/D encoding result=40 04:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:26 Set channel filter=0.000000e+000 result=40 04:25:26 Config A/D Result=40 04:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:26 Get A/D filter: -9.255963e+061 result=40 04:25:26 Get A/D value=-858993460 result=40 04:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:26 Parameters OK 04:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:26 Set A/D data flow result=40 04:25:26 Set A/D channel type result=40 04:25:26 Set A/D encoding result=40 04:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:26 Set channel filter=0.000000e+000 result=40 04:25:26 Config A/D Result=40 04:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:26 Get A/D filter: -9.255963e+061 result=40 04:25:26 Get A/D value=-858993460 result=40 04:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:26 Aux= 04:25:26 Message to Camera, serial 262296 queued 04:26:03 Received message from Master: op=PointingHead serial=262309 04:26:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:26:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:26:03 Point started: ret=0 04:26:03 point_skyscan result=0 04:26:04 Check angles 04:26:04 SkyScan query 04:26:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 04:26:05 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 04:26:05 Check angles 04:26:05 SkyScan query 04:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:26:06 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:26:06 Message to Master queued w/err=0: serial=262309 error=0 04:26:11 Received message from Master: op=Filter serial=262310 04:26:11 Color wheel filter change from 0 to 0 04:26:11 FLIGetFilterPos err=0 currentPosition=0 04:26:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:11 Filter is already there-color wheel unchanged 04:26:11 Received message from Master: op=Shutter serial=262311 04:26:11 Shutter LASER open 04:26:11 Received message from Camera: op=State serial=262313 04:26:11 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-19 04:26:11] 04:26:11 SkyScan query 04:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:26:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:12 Parameters OK 04:26:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:12 Set A/D data flow result=40 04:26:12 Set A/D channel type result=40 04:26:12 Set A/D encoding result=40 04:26:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:12 Set channel filter=0.000000e+000 result=40 04:26:12 Config A/D Result=40 04:26:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:12 Get A/D filter: -9.255963e+061 result=40 04:26:12 Get A/D value=-858993460 result=40 04:26:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:12 Parameters OK 04:26:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:12 Set A/D data flow result=40 04:26:12 Set A/D channel type result=40 04:26:12 Set A/D encoding result=40 04:26:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:12 Set channel filter=0.000000e+000 result=40 04:26:12 Config A/D Result=40 04:26:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:12 Get A/D filter: -9.255963e+061 result=40 04:26:12 Get A/D value=-858993460 result=40 04:26:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:12 Aux= 04:26:12 Message to Camera, serial 262313 queued 04:26:20 Received message from Master: op=Shutter serial=262323 04:26:20 Shutter LASER close 04:26:20 Received message from Master: op=PointingHead serial=262327 04:26:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:26:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:26:21 Point started: ret=0 04:26:21 point_skyscan result=0 04:26:22 Check angles 04:26:22 SkyScan query 04:26:22 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.34<-21556 Statuses=0009 0009 04:26:22 Msec=0 True Az=135.9 Ze=-143.34 Az status=0009 Ze status=0009 04:26:22 Check angles 04:26:22 SkyScan query 04:26:23 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.355<-20157 Statuses=0009 0009 04:26:23 Msec=750 True Az=153.42 Ze=-122.355 Az status=0009 Ze status=0009 04:26:23 Check angles 04:26:23 SkyScan query 04:26:24 SkyScan query done: ret=0 az=170.88<-11392 ze=-101.46<-18764 Statuses=0009 0009 04:26:24 Msec=1500 True Az=170.88 Ze=-101.46 Az status=0009 Ze status=0009 04:26:24 Check angles 04:26:24 SkyScan query 04:26:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.475<-17365 Statuses=0008 0009 04:26:24 Msec=2250 True Az=176.01 Ze=-80.475 Az status=0008 Ze status=0009 04:26:25 Check angles 04:26:25 SkyScan query 04:26:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.505<-15967 Statuses=0008 0009 04:26:25 Msec=3000 True Az=176.01 Ze=-59.505 Az status=0008 Ze status=0009 04:26:25 Check angles 04:26:25 SkyScan query 04:26:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:26:26 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:26:26 Message to Master queued w/err=0: serial=262327 error=0 04:26:31 Received message from Master: op=Filter serial=262328 04:26:31 Color wheel filter change from 0 to 0 04:26:31 FLIGetFilterPos err=0 currentPosition=0 04:26:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:31 Filter is already there-color wheel unchanged 04:26:31 Received message from Master: op=Shutter serial=262329 04:26:31 Shutter LASER close 04:26:31 Received message from Camera: op=State serial=262331 04:26:31 GetSingleValue result=40 Value=cccccccc 04:26:31 SkyScan query 04:26:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:26:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:32 Parameters OK 04:26:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:32 Set A/D data flow result=40 04:26:32 Set A/D channel type result=40 04:26:32 Set A/D encoding result=40 04:26:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:32 Set channel filter=0.000000e+000 result=40 04:26:32 Config A/D Result=40 04:26:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:32 Get A/D filter: -9.255963e+061 result=40 04:26:32 Get A/D value=-858993460 result=40 04:26:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:32 Parameters OK 04:26:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:32 Set A/D data flow result=40 04:26:32 Set A/D channel type result=40 04:26:32 Set A/D encoding result=40 04:26:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:32 Set channel filter=0.000000e+000 result=40 04:26:32 Config A/D Result=40 04:26:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:32 Get A/D filter: -9.255963e+061 result=40 04:26:32 Get A/D value=-858993460 result=40 04:26:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:32 Aux= 04:26:32 Message to Camera, serial 262331 queued 04:27:09 Received message from Master: op=PointingHead serial=262344 04:27:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:27:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:27:09 Point started: ret=0 04:27:09 point_skyscan result=0 04:27:10 Check angles 04:27:10 SkyScan query 04:27:10 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.975<-13465 Statuses=0009 0009 04:27:10 Msec=0 True Az=152.97 Ze=-21.975 Az status=0009 Ze status=0009 04:27:10 Check angles 04:27:10 SkyScan query 04:27:11 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.51<-12034 Statuses=0009 0009 04:27:11 Msec=750 True Az=135.135 Ze=-0.51 Az status=0009 Ze status=0009 04:27:11 Check angles 04:27:11 SkyScan query 04:27:12 SkyScan query done: ret=0 az=117.615<-7841 ze=20.475<-10635 Statuses=0009 0009 04:27:12 Msec=1500 True Az=117.615 Ze=20.475 Az status=0009 Ze status=0009 04:27:12 Check angles 04:27:12 SkyScan query 04:27:13 SkyScan query done: ret=0 az=100.38<-6692 ze=41.43<-9238 Statuses=0009 0009 04:27:13 Msec=2250 True Az=100.38 Ze=41.43 Az status=0009 Ze status=0009 04:27:13 Check angles 04:27:13 SkyScan query 04:27:13 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 04:27:13 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 04:27:14 Check angles 04:27:14 SkyScan query 04:27:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:27:14 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 04:27:14 Message to Master queued w/err=0: serial=262344 error=0 04:27:19 Received message from Master: op=Filter serial=262345 04:27:19 Color wheel filter change from 0 to 0 04:27:19 FLIGetFilterPos err=0 currentPosition=0 04:27:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:19 Filter is already there-color wheel unchanged 04:27:19 Received message from Master: op=Shutter serial=262346 04:27:19 Shutter LASER close 04:27:19 Received message from Camera: op=State serial=262348 04:27:19 GetSingleValue result=40 Value=cccccccc 04:27:19 SkyScan query 04:27:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:27:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:20 Parameters OK 04:27:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:20 Set A/D data flow result=40 04:27:20 Set A/D channel type result=40 04:27:20 Set A/D encoding result=40 04:27:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:20 Set channel filter=0.000000e+000 result=40 04:27:20 Config A/D Result=40 04:27:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:20 Get A/D filter: -9.255963e+061 result=40 04:27:20 Get A/D value=-858993460 result=40 04:27:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:20 Parameters OK 04:27:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:20 Set A/D data flow result=40 04:27:20 Set A/D channel type result=40 04:27:20 Set A/D encoding result=40 04:27:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:20 Set channel filter=0.000000e+000 result=40 04:27:20 Config A/D Result=40 04:27:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:20 Get A/D filter: -9.255963e+061 result=40 04:27:20 Get A/D value=-858993460 result=40 04:27:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:20 Aux= 04:27:20 Message to Camera, serial 262348 queued 04:27:57 Received message from Master: op=PointingHead serial=262361 04:27:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:27:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:27:57 Point started: ret=0 04:27:57 point_skyscan result=0 04:27:58 Check angles 04:27:58 SkyScan query 04:27:59 SkyScan query done: ret=0 az=85.995<-5733 ze=21.135<-10591 Statuses=0008 0009 04:27:59 Msec=0 True Az=85.995 Ze=21.135 Az status=0008 Ze status=0009 04:27:59 Check angles 04:27:59 SkyScan query 04:27:59 SkyScan query done: ret=0 az=86.01<-5734 ze=0.15<-11990 Statuses=0008 0009 04:27:59 Msec=750 True Az=86.01 Ze=0.15 Az status=0008 Ze status=0009 04:27:59 Check angles 04:27:59 SkyScan query 04:28:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.775<-13385 Statuses=0008 0009 04:28:00 Msec=1500 True Az=85.995 Ze=-20.775 Az status=0008 Ze status=0009 04:28:00 Check angles 04:28:00 SkyScan query 04:28:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.18<-14812 Statuses=0008 0009 04:28:01 Msec=2250 True Az=85.995 Ze=-42.18 Az status=0008 Ze status=0009 04:28:01 Check angles 04:28:01 SkyScan query 04:28:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:28:02 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:28:02 Message to Master queued w/err=0: serial=262361 error=0 04:28:07 Received message from Master: op=Filter serial=262362 04:28:07 Color wheel filter change from 0 to 0 04:28:07 FLIGetFilterPos err=0 currentPosition=0 04:28:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:07 Filter is already there-color wheel unchanged 04:28:07 Received message from Master: op=Shutter serial=262363 04:28:07 Shutter LASER close 04:28:07 Received message from Camera: op=State serial=262365 04:28:07 GetSingleValue result=40 Value=cccccccc 04:28:07 SkyScan query 04:28:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:28:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:07 Parameters OK 04:28:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:07 Set A/D data flow result=40 04:28:07 Set A/D channel type result=40 04:28:07 Set A/D encoding result=40 04:28:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:07 Set channel filter=0.000000e+000 result=40 04:28:07 Config A/D Result=40 04:28:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:07 Get A/D filter: -9.255963e+061 result=40 04:28:07 Get A/D value=-858993460 result=40 04:28:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:07 Parameters OK 04:28:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:07 Set A/D data flow result=40 04:28:07 Set A/D channel type result=40 04:28:07 Set A/D encoding result=40 04:28:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:07 Set channel filter=0.000000e+000 result=40 04:28:07 Config A/D Result=40 04:28:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:07 Get A/D filter: -9.255963e+061 result=40 04:28:07 Get A/D value=-858993460 result=40 04:28:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:07 Aux= 04:28:07 Message to Camera, serial 262365 queued 04:28:44 Received message from Master: op=PointingHead serial=262378 04:28:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:28:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:28:45 Point started: ret=0 04:28:45 point_skyscan result=0 04:28:45 Check angles 04:28:45 SkyScan query 04:28:46 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.63<-17442 Statuses=0009 0009 04:28:46 Msec=0 True Az=109.395 Ze=-81.63 Az status=0009 Ze status=0009 04:28:46 Check angles 04:28:46 SkyScan query 04:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.02<-18868 Statuses=0008 0009 04:28:47 Msec=750 True Az=112.995 Ze=-103.02 Az status=0008 Ze status=0009 04:28:47 Check angles 04:28:47 SkyScan query 04:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.975<-20265 Statuses=0008 0009 04:28:47 Msec=1500 True Az=112.995 Ze=-123.975 Az status=0008 Ze status=0009 04:28:48 Check angles 04:28:48 SkyScan query 04:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.35<-21690 Statuses=0008 0009 04:28:48 Msec=2250 True Az=112.995 Ze=-145.35 Az status=0008 Ze status=0009 04:28:48 Check angles 04:28:48 SkyScan query 04:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.77<-23118 Statuses=0008 0009 04:28:49 Msec=3000 True Az=112.995 Ze=-166.77 Az status=0008 Ze status=0009 04:28:49 Check angles 04:28:49 SkyScan query 04:28:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:28:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:28:50 Message to Master queued w/err=0: serial=262378 error=0 04:28:55 Received message from Master: op=Filter serial=262379 04:28:55 Color wheel filter change from 0 to 0 04:28:55 FLIGetFilterPos err=0 currentPosition=0 04:28:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:55 Filter is already there-color wheel unchanged 04:28:55 Received message from Master: op=Shutter serial=262380 04:28:55 Shutter LASER open 04:28:55 Received message from Camera: op=State serial=262382 04:28:55 GetSingleValue result=40 Value=cccccccc 04:28:55 SkyScan query 04:28:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:28:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:56 Parameters OK 04:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:56 Set A/D data flow result=40 04:28:56 Set A/D channel type result=40 04:28:56 Set A/D encoding result=40 04:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:56 Set channel filter=0.000000e+000 result=40 04:28:56 Config A/D Result=40 04:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:56 Get A/D filter: -9.255963e+061 result=40 04:28:56 Get A/D value=-858993460 result=40 04:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:56 Parameters OK 04:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:56 Set A/D data flow result=40 04:28:56 Set A/D channel type result=40 04:28:56 Set A/D encoding result=40 04:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:56 Set channel filter=0.000000e+000 result=40 04:28:56 Config A/D Result=40 04:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:56 Get A/D filter: -9.255963e+061 result=40 04:28:56 Get A/D value=-858993460 result=40 04:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:56 Aux= 04:28:56 Message to Camera, serial 262382 queued 04:29:04 Received message from Master: op=Shutter serial=262392 04:29:04 Shutter LASER close 04:29:05 Received message from Master: op=PointingHead serial=262396 04:29:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:29:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:29:05 Point started: ret=0 04:29:05 point_skyscan result=0 04:29:06 Check angles 04:29:06 SkyScan query 04:29:06 SkyScan query done: ret=0 az=90.21<-6014 ze=157.575<-1495 Statuses=0009 0009 04:29:06 Msec=0 True Az=90.21 Ze=157.575 Az status=0009 Ze status=0009 04:29:06 Check angles 04:29:06 SkyScan query 04:29:07 SkyScan query done: ret=0 az=72.72<-4848 ze=136.605<-2893 Statuses=0009 0009 04:29:07 Msec=750 True Az=72.72 Ze=136.605 Az status=0009 Ze status=0009 04:29:07 Check angles 04:29:07 SkyScan query 04:29:08 SkyScan query done: ret=0 az=55.29<-3686 ze=115.71<-4286 Statuses=0009 0009 04:29:08 Msec=1500 True Az=55.29 Ze=115.71 Az status=0009 Ze status=0009 04:29:08 Check angles 04:29:08 SkyScan query 04:29:08 SkyScan query done: ret=0 az=41.01<-2734 ze=94.695<-5687 Statuses=0009 0009 04:29:08 Msec=2250 True Az=41.01 Ze=94.695 Az status=0009 Ze status=0009 04:29:09 Check angles 04:29:09 SkyScan query 04:29:09 SkyScan query done: ret=0 az=40.995<-2733 ze=73.29<-7114 Statuses=0008 0009 04:29:09 Msec=3000 True Az=40.995 Ze=73.29 Az status=0008 Ze status=0009 04:29:09 Check angles 04:29:09 SkyScan query 04:29:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 04:29:10 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 04:29:10 Check angles 04:29:10 SkyScan query 04:29:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:29:11 Msec=4500 True Az=40.995 Ze=51.495 Az status=0008 Ze status=0008 04:29:11 Message to Master queued w/err=0: serial=262396 error=0 04:29:16 Received message from Master: op=Filter serial=262397 04:29:16 Color wheel filter change from 0 to 0 04:29:16 FLIGetFilterPos err=0 currentPosition=0 04:29:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:16 Filter is already there-color wheel unchanged 04:29:16 Received message from Master: op=Shutter serial=262398 04:29:16 Shutter LASER close 04:29:16 Received message from Camera: op=State serial=262400 04:29:16 GetSingleValue result=40 Value=cccccccc 04:29:16 SkyScan query 04:29:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.51<-8566 Statuses=0008 0008 04:29:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:17 Parameters OK 04:29:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:17 Set A/D data flow result=40 04:29:17 Set A/D channel type result=40 04:29:17 Set A/D encoding result=40 04:29:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:17 Set channel filter=0.000000e+000 result=40 04:29:17 Config A/D Result=40 04:29:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:17 Get A/D filter: -9.255963e+061 result=40 04:29:17 Get A/D value=-858993460 result=40 04:29:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:17 Parameters OK 04:29:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:17 Set A/D data flow result=40 04:29:17 Set A/D channel type result=40 04:29:17 Set A/D encoding result=40 04:29:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:17 Set channel filter=0.000000e+000 result=40 04:29:17 Config A/D Result=40 04:29:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:17 Get A/D filter: -9.255963e+061 result=40 04:29:17 Get A/D value=-858993460 result=40 04:29:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.509998 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:17 Aux= 04:29:17 Message to Camera, serial 262400 queued 04:29:53 Received message from Master: op=PointingHead serial=262412 04:29:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:29:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:29:53 Point started: ret=0 04:29:53 point_skyscan result=0 04:29:54 Check angles 04:29:54 SkyScan query 04:29:54 SkyScan query done: ret=0 az=40.995<-2733 ze=21.51<-10566 Statuses=0008 0009 04:29:54 Msec=0 True Az=40.995 Ze=21.51 Az status=0008 Ze status=0009 04:29:55 Check angles 04:29:55 SkyScan query 04:29:55 SkyScan query done: ret=0 az=40.995<-2733 ze=0.045<-11997 Statuses=0008 0009 04:29:55 Msec=750 True Az=40.995 Ze=0.045 Az status=0008 Ze status=0009 04:29:55 Check angles 04:29:55 SkyScan query 04:29:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.91<-13394 Statuses=0008 0009 04:29:56 Msec=1500 True Az=40.995 Ze=-20.91 Az status=0008 Ze status=0009 04:29:56 Check angles 04:29:56 SkyScan query 04:29:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 04:29:57 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 04:29:57 Check angles 04:29:57 SkyScan query 04:29:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:29:57 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:29:57 Message to Master queued w/err=0: serial=262412 error=0 04:30:02 Received message from Master: op=Filter serial=262413 04:30:02 Color wheel filter change from 0 to 0 04:30:02 FLIGetFilterPos err=0 currentPosition=0 04:30:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:02 Filter is already there-color wheel unchanged 04:30:03 Received message from Master: op=Shutter serial=262414 04:30:03 Shutter LASER close 04:30:03 Received message from Camera: op=State serial=262416 04:30:03 GetSingleValue result=40 Value=cccccccc 04:30:03 SkyScan query 04:30:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:30:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:03 Parameters OK 04:30:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:03 Set A/D data flow result=40 04:30:03 Set A/D channel type result=40 04:30:03 Set A/D encoding result=40 04:30:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:03 Set channel filter=0.000000e+000 result=40 04:30:03 Config A/D Result=40 04:30:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:03 Get A/D filter: -9.255963e+061 result=40 04:30:03 Get A/D value=-858993460 result=40 04:30:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:03 Parameters OK 04:30:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:03 Set A/D data flow result=40 04:30:03 Set A/D channel type result=40 04:30:03 Set A/D encoding result=40 04:30:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:03 Set channel filter=0.000000e+000 result=40 04:30:03 Config A/D Result=40 04:30:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:03 Get A/D filter: -9.255963e+061 result=40 04:30:03 Get A/D value=-858993460 result=40 04:30:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:03 Aux= 04:30:03 Message to Camera, serial 262416 queued 04:30:40 Received message from Master: op=PointingHead serial=262429 04:30:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:30:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:30:40 Point started: ret=0 04:30:40 point_skyscan result=0 04:30:41 Check angles 04:30:41 SkyScan query 04:30:42 SkyScan query done: ret=0 az=64.035<-4269 ze=-68.355<-16557 Statuses=0009 0009 04:30:42 Msec=0 True Az=64.035 Ze=-68.355 Az status=0009 Ze status=0009 04:30:42 Check angles 04:30:42 SkyScan query 04:30:42 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.37<-17958 Statuses=0009 0009 04:30:42 Msec=750 True Az=81.33 Ze=-89.37 Az status=0009 Ze status=0009 04:30:43 Check angles 04:30:43 SkyScan query 04:30:43 SkyScan query done: ret=0 az=99.315<-6621 ze=-110.775<-19385 Statuses=0009 0009 04:30:43 Msec=1500 True Az=99.315 Ze=-110.775 Az status=0009 Ze status=0009 04:30:43 Check angles 04:30:43 SkyScan query 04:30:44 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.67<-20778 Statuses=0009 0009 04:30:44 Msec=2250 True Az=116.82 Ze=-131.67 Az status=0009 Ze status=0009 04:30:44 Check angles 04:30:44 SkyScan query 04:30:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 04:30:45 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 04:30:45 Check angles 04:30:45 SkyScan query 04:30:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 04:30:45 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 04:30:45 Message to Master queued w/err=0: serial=262429 error=0 04:30:50 Received message from Master: op=Filter serial=262430 04:30:50 Color wheel filter change from 0 to 0 04:30:50 FLIGetFilterPos err=0 currentPosition=0 04:30:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:50 Filter is already there-color wheel unchanged 04:30:51 Received message from Master: op=Shutter serial=262431 04:30:51 Shutter LASER close 04:30:51 Received message from Camera: op=State serial=262433 04:30:51 GetSingleValue result=40 Value=cccccccc 04:30:51 SkyScan query 04:30:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:30:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:51 Parameters OK 04:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:51 Set A/D data flow result=40 04:30:51 Set A/D channel type result=40 04:30:51 Set A/D encoding result=40 04:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:51 Set channel filter=0.000000e+000 result=40 04:30:51 Config A/D Result=40 04:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:51 Get A/D filter: -9.255963e+061 result=40 04:30:51 Get A/D value=-858993460 result=40 04:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:51 Parameters OK 04:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:51 Set A/D data flow result=40 04:30:51 Set A/D channel type result=40 04:30:51 Set A/D encoding result=40 04:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:51 Set channel filter=0.000000e+000 result=40 04:30:51 Config A/D Result=40 04:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:51 Get A/D filter: -9.255963e+061 result=40 04:30:51 Get A/D value=-858993460 result=40 04:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:51 Aux= 04:30:51 Message to Camera, serial 262433 queued 04:31:28 Received message from Master: op=PointingHead serial=262446 04:31:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:31:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:31:28 Point started: ret=0 04:31:28 point_skyscan result=0 04:31:29 Check angles 04:31:29 SkyScan query 04:31:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.285<-23419 Statuses=0009 0009 04:31:30 Msec=0 True Az=112.995 Ze=-171.285 Az status=0009 Ze status=0009 04:31:30 Check angles 04:31:30 SkyScan query 04:31:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:31:30 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:31:30 Message to Master queued w/err=0: serial=262446 error=0 04:31:35 Received message from Master: op=Filter serial=262447 04:31:35 Color wheel filter change from 0 to 0 04:31:35 FLIGetFilterPos err=0 currentPosition=0 04:31:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:35 Filter is already there-color wheel unchanged 04:31:36 Received message from Master: op=Shutter serial=262448 04:31:36 Shutter LASER open 04:31:36 Received message from Camera: op=State serial=262450 04:31:36 GetSingleValue result=40 Value=cccccccc 04:31:36 SkyScan query 04:31:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:31:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:36 Parameters OK 04:31:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:36 Set A/D data flow result=40 04:31:36 Set A/D channel type result=40 04:31:36 Set A/D encoding result=40 04:31:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:36 Set channel filter=0.000000e+000 result=40 04:31:36 Config A/D Result=40 04:31:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:36 Get A/D filter: -9.255963e+061 result=40 04:31:36 Get A/D value=-858993460 result=40 04:31:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:36 Parameters OK 04:31:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:36 Set A/D data flow result=40 04:31:36 Set A/D channel type result=40 04:31:36 Set A/D encoding result=40 04:31:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:36 Set channel filter=0.000000e+000 result=40 04:31:36 Config A/D Result=40 04:31:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:36 Get A/D filter: -9.255963e+061 result=40 04:31:36 Get A/D value=-858993460 result=40 04:31:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:36 Aux= 04:31:36 Message to Camera, serial 262450 queued 04:31:45 Received message from Master: op=Shutter serial=262460 04:31:45 Shutter LASER close 04:31:45 Received message from Master: op=PointingHead serial=262464 04:31:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:31:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:31:46 Point started: ret=0 04:31:46 point_skyscan result=0 04:31:47 Check angles 04:31:47 SkyScan query 04:31:47 SkyScan query done: ret=0 az=136.23<-9082 ze=-143.04<-21536 Statuses=0009 0009 04:31:47 Msec=0 True Az=136.23 Ze=-143.04 Az status=0009 Ze status=0009 04:31:47 Check angles 04:31:47 SkyScan query 04:31:48 SkyScan query done: ret=0 az=153.975<-10265 ze=-121.665<-20111 Statuses=0009 0009 04:31:48 Msec=750 True Az=153.975 Ze=-121.665 Az status=0009 Ze status=0009 04:31:48 Check angles 04:31:48 SkyScan query 04:31:49 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.605<-18707 Statuses=0009 0009 04:31:49 Msec=1500 True Az=171.525 Ze=-100.605 Az status=0009 Ze status=0009 04:31:49 Check angles 04:31:49 SkyScan query 04:31:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 04:31:49 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 04:31:50 Check angles 04:31:50 SkyScan query 04:31:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.74<-15916 Statuses=0008 0009 04:31:50 Msec=3000 True Az=176.01 Ze=-58.74 Az status=0008 Ze status=0009 04:31:50 Check angles 04:31:50 SkyScan query 04:31:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:31:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:31:51 Message to Master queued w/err=0: serial=262464 error=0 04:31:56 Received message from Master: op=Filter serial=262465 04:31:56 Color wheel filter change from 0 to 0 04:31:56 FLIGetFilterPos err=0 currentPosition=0 04:31:56 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:56 Filter is already there-color wheel unchanged 04:31:56 Received message from Master: op=Shutter serial=262466 04:31:56 Shutter LASER close 04:31:56 Received message from Camera: op=State serial=262468 04:31:56 GetSingleValue result=40 Value=cccccccc 04:31:56 SkyScan query 04:31:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:31:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:57 Parameters OK 04:31:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:57 Set A/D data flow result=40 04:31:57 Set A/D channel type result=40 04:31:57 Set A/D encoding result=40 04:31:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:57 Set channel filter=0.000000e+000 result=40 04:31:57 Config A/D Result=40 04:31:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:57 Get A/D filter: -9.255963e+061 result=40 04:31:57 Get A/D value=-858993460 result=40 04:31:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:57 Parameters OK 04:31:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:57 Set A/D data flow result=40 04:31:57 Set A/D channel type result=40 04:31:57 Set A/D encoding result=40 04:31:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:57 Set channel filter=0.000000e+000 result=40 04:31:57 Config A/D Result=40 04:31:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:57 Get A/D filter: -9.255963e+061 result=40 04:31:57 Get A/D value=-858993460 result=40 04:31:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:57 Aux= 04:31:57 Message to Camera, serial 262468 queued 04:32:34 Received message from Master: op=PointingHead serial=262481 04:32:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:32:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:32:34 Point started: ret=0 04:32:34 point_skyscan result=0 04:32:35 Check angles 04:32:35 SkyScan query 04:32:35 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.24<-13416 Statuses=0009 0009 04:32:35 Msec=0 True Az=152.595 Ze=-21.24 Az status=0009 Ze status=0009 04:32:36 Check angles 04:32:36 SkyScan query 04:32:36 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.315<-12021 Statuses=0009 0009 04:32:36 Msec=750 True Az=135.105 Ze=-0.315 Az status=0009 Ze status=0009 04:32:36 Check angles 04:32:36 SkyScan query 04:32:37 SkyScan query done: ret=0 az=117.63<-7842 ze=20.64<-10624 Statuses=0009 0009 04:32:37 Msec=1500 True Az=117.63 Ze=20.64 Az status=0009 Ze status=0009 04:32:37 Check angles 04:32:37 SkyScan query 04:32:38 SkyScan query done: ret=0 az=99.795<-6653 ze=42.015<-9199 Statuses=0009 0009 04:32:38 Msec=2250 True Az=99.795 Ze=42.015 Az status=0009 Ze status=0009 04:32:38 Check angles 04:32:38 SkyScan query 04:32:38 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:32:38 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:32:39 Check angles 04:32:39 SkyScan query 04:32:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:32:39 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:32:39 Message to Master queued w/err=0: serial=262481 error=0 04:32:44 Received message from Master: op=Filter serial=262482 04:32:44 Color wheel filter change from 0 to 0 04:32:44 FLIGetFilterPos err=0 currentPosition=0 04:32:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:44 Filter is already there-color wheel unchanged 04:32:44 Received message from Master: op=Shutter serial=262483 04:32:44 Shutter LASER close 04:32:44 Received message from Camera: op=State serial=262485 04:32:44 GetSingleValue result=40 Value=cccccccc 04:32:44 SkyScan query 04:32:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:32:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:45 Parameters OK 04:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:45 Set A/D data flow result=40 04:32:45 Set A/D channel type result=40 04:32:45 Set A/D encoding result=40 04:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:45 Set channel filter=0.000000e+000 result=40 04:32:45 Config A/D Result=40 04:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:45 Get A/D filter: -9.255963e+061 result=40 04:32:45 Get A/D value=-858993460 result=40 04:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:45 Parameters OK 04:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:45 Set A/D data flow result=40 04:32:45 Set A/D channel type result=40 04:32:45 Set A/D encoding result=40 04:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:45 Set channel filter=0.000000e+000 result=40 04:32:45 Config A/D Result=40 04:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:45 Get A/D filter: -9.255963e+061 result=40 04:32:45 Get A/D value=-858993460 result=40 04:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:45 Aux= 04:32:45 Message to Camera, serial 262485 queued 04:33:22 Received message from Master: op=PointingHead serial=262498 04:33:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:33:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:33:22 Point started: ret=0 04:33:22 point_skyscan result=0 04:33:23 Check angles 04:33:23 SkyScan query 04:33:24 SkyScan query done: ret=0 az=85.995<-5733 ze=21.915<-10539 Statuses=0008 0009 04:33:24 Msec=0 True Az=85.995 Ze=21.915 Az status=0008 Ze status=0009 04:33:24 Check angles 04:33:24 SkyScan query 04:33:24 SkyScan query done: ret=0 az=85.995<-5733 ze=0.99<-11934 Statuses=0008 0009 04:33:24 Msec=750 True Az=85.995 Ze=0.99 Az status=0008 Ze status=0009 04:33:24 Check angles 04:33:24 SkyScan query 04:33:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-19.965<-13331 Statuses=0008 0009 04:33:25 Msec=1500 True Az=85.995 Ze=-19.965 Az status=0008 Ze status=0009 04:33:25 Check angles 04:33:25 SkyScan query 04:33:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.905<-14727 Statuses=0008 0009 04:33:26 Msec=2250 True Az=85.995 Ze=-40.905 Az status=0008 Ze status=0009 04:33:26 Check angles 04:33:26 SkyScan query 04:33:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:33:27 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:33:27 Message to Master queued w/err=0: serial=262498 error=0 04:33:32 Received message from Master: op=Filter serial=262499 04:33:32 Color wheel filter change from 0 to 0 04:33:32 FLIGetFilterPos err=0 currentPosition=0 04:33:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:32 Filter is already there-color wheel unchanged 04:33:32 Received message from Master: op=Shutter serial=262500 04:33:32 Shutter LASER close 04:33:32 Received message from Camera: op=State serial=262502 04:33:32 GetSingleValue result=40 Value=cccccccc 04:33:32 SkyScan query 04:33:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:33:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:32 Parameters OK 04:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:32 Set A/D data flow result=40 04:33:32 Set A/D channel type result=40 04:33:32 Set A/D encoding result=40 04:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:32 Set channel filter=0.000000e+000 result=40 04:33:32 Config A/D Result=40 04:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:32 Get A/D filter: -9.255963e+061 result=40 04:33:32 Get A/D value=-858993460 result=40 04:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:32 Parameters OK 04:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:32 Set A/D data flow result=40 04:33:32 Set A/D channel type result=40 04:33:32 Set A/D encoding result=40 04:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:32 Set channel filter=0.000000e+000 result=40 04:33:32 Config A/D Result=40 04:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:32 Get A/D filter: -9.255963e+061 result=40 04:33:32 Get A/D value=-858993460 result=40 04:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:32 Aux= 04:33:32 Message to Camera, serial 262502 queued 04:34:09 Received message from Master: op=PointingHead serial=262515 04:34:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:34:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:34:10 Point started: ret=0 04:34:10 point_skyscan result=0 04:34:10 Check angles 04:34:10 SkyScan query 04:34:11 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.24<-17416 Statuses=0009 0009 04:34:11 Msec=0 True Az=108.96 Ze=-81.24 Az status=0009 Ze status=0009 04:34:11 Check angles 04:34:11 SkyScan query 04:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 04:34:12 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 04:34:12 Check angles 04:34:12 SkyScan query 04:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.165<-20211 Statuses=0008 0009 04:34:12 Msec=1500 True Az=112.995 Ze=-123.165 Az status=0008 Ze status=0009 04:34:13 Check angles 04:34:13 SkyScan query 04:34:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 04:34:13 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 04:34:13 Check angles 04:34:13 SkyScan query 04:34:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 04:34:14 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 04:34:14 Check angles 04:34:14 SkyScan query 04:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:34:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:34:15 Message to Master queued w/err=0: serial=262515 error=0 04:34:20 Received message from Master: op=Filter serial=262516 04:34:20 Color wheel filter change from 0 to 0 04:34:20 FLIGetFilterPos err=0 currentPosition=0 04:34:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:20 Filter is already there-color wheel unchanged 04:34:20 Received message from Master: op=Shutter serial=262517 04:34:20 Shutter LASER open 04:34:20 Received message from Camera: op=State serial=262519 04:34:20 GetSingleValue result=40 Value=cccccccc 04:34:20 SkyScan query 04:34:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:34:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:21 Parameters OK 04:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:21 Set A/D data flow result=40 04:34:21 Set A/D channel type result=40 04:34:21 Set A/D encoding result=40 04:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:21 Set channel filter=0.000000e+000 result=40 04:34:21 Config A/D Result=40 04:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:21 Get A/D filter: -9.255963e+061 result=40 04:34:21 Get A/D value=-858993460 result=40 04:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:21 Parameters OK 04:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:21 Set A/D data flow result=40 04:34:21 Set A/D channel type result=40 04:34:21 Set A/D encoding result=40 04:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:21 Set channel filter=0.000000e+000 result=40 04:34:21 Config A/D Result=40 04:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:21 Get A/D filter: -9.255963e+061 result=40 04:34:21 Get A/D value=-858993460 result=40 04:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:21 Aux= 04:34:21 Message to Camera, serial 262519 queued 04:34:29 Received message from Master: op=Shutter serial=262529 04:34:29 Shutter LASER close 04:34:29 Received message from Master: op=PointingHead serial=262533 04:34:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:34:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:34:30 Point started: ret=0 04:34:30 point_skyscan result=0 04:34:31 Check angles 04:34:31 SkyScan query 04:34:31 SkyScan query done: ret=0 az=89.865<-5991 ze=157.17<-1522 Statuses=0009 0009 04:34:31 Msec=0 True Az=89.865 Ze=157.17 Az status=0009 Ze status=0009 04:34:31 Check angles 04:34:31 SkyScan query 04:34:32 SkyScan query done: ret=0 az=72.27<-4818 ze=136.2<-2920 Statuses=0009 0009 04:34:32 Msec=750 True Az=72.27 Ze=136.2 Az status=0009 Ze status=0009 04:34:32 Check angles 04:34:32 SkyScan query 04:34:33 SkyScan query done: ret=0 az=54.915<-3661 ze=115.26<-4316 Statuses=0009 0009 04:34:33 Msec=1500 True Az=54.915 Ze=115.26 Az status=0009 Ze status=0009 04:34:33 Check angles 04:34:33 SkyScan query 04:34:33 SkyScan query done: ret=0 az=41.01<-2734 ze=94.29<-5714 Statuses=0009 0009 04:34:33 Msec=2250 True Az=41.01 Ze=94.29 Az status=0009 Ze status=0009 04:34:34 Check angles 04:34:34 SkyScan query 04:34:34 SkyScan query done: ret=0 az=40.995<-2733 ze=72.855<-7143 Statuses=0008 0009 04:34:34 Msec=3000 True Az=40.995 Ze=72.855 Az status=0008 Ze status=0009 04:34:34 Check angles 04:34:34 SkyScan query 04:34:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 04:34:35 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 04:34:35 Check angles 04:34:35 SkyScan query 04:34:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:34:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:34:36 Message to Master queued w/err=0: serial=262533 error=0 04:34:41 Received message from Master: op=Filter serial=262534 04:34:41 Color wheel filter change from 0 to 0 04:34:41 FLIGetFilterPos err=0 currentPosition=0 04:34:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:41 Filter is already there-color wheel unchanged 04:34:41 Received message from Master: op=Shutter serial=262535 04:34:41 Shutter LASER close 04:34:41 Received message from Camera: op=State serial=262537 04:34:41 GetSingleValue result=40 Value=cccccccc 04:34:41 SkyScan query 04:34:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:34:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:42 Parameters OK 04:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:42 Set A/D data flow result=40 04:34:42 Set A/D channel type result=40 04:34:42 Set A/D encoding result=40 04:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:42 Set channel filter=0.000000e+000 result=40 04:34:42 Config A/D Result=40 04:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:42 Get A/D filter: -9.255963e+061 result=40 04:34:42 Get A/D value=-858993460 result=40 04:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:42 Parameters OK 04:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:42 Set A/D data flow result=40 04:34:42 Set A/D channel type result=40 04:34:42 Set A/D encoding result=40 04:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:42 Set channel filter=0.000000e+000 result=40 04:34:42 Config A/D Result=40 04:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:42 Get A/D filter: -9.255963e+061 result=40 04:34:42 Get A/D value=-858993460 result=40 04:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:42 Aux= 04:34:42 Message to Camera, serial 262537 queued 04:35:19 Received message from Master: op=PointingHead serial=262550 04:35:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:35:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:35:19 Point started: ret=0 04:35:19 point_skyscan result=0 04:35:20 Check angles 04:35:20 SkyScan query 04:35:20 SkyScan query done: ret=0 az=40.995<-2733 ze=21.81<-10546 Statuses=0008 0009 04:35:20 Msec=0 True Az=40.995 Ze=21.81 Az status=0008 Ze status=0009 04:35:20 Check angles 04:35:20 SkyScan query 04:35:21 SkyScan query done: ret=0 az=40.995<-2733 ze=0.405<-11973 Statuses=0008 0009 04:35:21 Msec=750 True Az=40.995 Ze=0.405 Az status=0008 Ze status=0009 04:35:21 Check angles 04:35:21 SkyScan query 04:35:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.535<-13369 Statuses=0008 0009 04:35:22 Msec=1500 True Az=40.995 Ze=-20.535 Az status=0008 Ze status=0009 04:35:22 Check angles 04:35:22 SkyScan query 04:35:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 04:35:23 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 04:35:23 Check angles 04:35:23 SkyScan query 04:35:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:35:23 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:35:23 Message to Master queued w/err=0: serial=262550 error=0 04:35:28 Received message from Master: op=Filter serial=262551 04:35:28 Color wheel filter change from 0 to 0 04:35:28 FLIGetFilterPos err=0 currentPosition=0 04:35:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:28 Filter is already there-color wheel unchanged 04:35:29 Received message from Master: op=Shutter serial=262552 04:35:29 Shutter LASER close 04:35:29 Received message from Camera: op=State serial=262554 04:35:29 GetSingleValue result=40 Value=cccccccc 04:35:29 SkyScan query 04:35:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:35:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:29 Parameters OK 04:35:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:29 Set A/D data flow result=40 04:35:29 Set A/D channel type result=40 04:35:29 Set A/D encoding result=40 04:35:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:29 Set channel filter=0.000000e+000 result=40 04:35:29 Config A/D Result=40 04:35:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:29 Get A/D filter: -9.255963e+061 result=40 04:35:29 Get A/D value=-858993460 result=40 04:35:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:29 Parameters OK 04:35:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:29 Set A/D data flow result=40 04:35:29 Set A/D channel type result=40 04:35:29 Set A/D encoding result=40 [UTC 2018-12-19 04:35:29] 04:35:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:29 Set channel filter=0.000000e+000 result=40 04:35:29 Config A/D Result=40 04:35:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:29 Get A/D filter: -9.255963e+061 result=40 04:35:29 Get A/D value=-858993460 result=40 04:35:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:29 Aux= 04:35:29 Message to Camera, serial 262554 queued [UTC 2018-12-19 04:35:52] 04:36:06 Received message from Master: op=PointingHead serial=262567 04:36:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:36:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:36:06 Point started: ret=0 04:36:06 point_skyscan result=0 04:36:07 Check angles 04:36:07 SkyScan query 04:36:08 SkyScan query done: ret=0 az=64.11<-4274 ze=-68.385<-16559 Statuses=0009 0009 04:36:08 Msec=0 True Az=64.11 Ze=-68.385 Az status=0009 Ze status=0009 04:36:08 Check angles 04:36:08 SkyScan query 04:36:08 SkyScan query done: ret=0 az=81.525<-5435 ze=-89.385<-17959 Statuses=0009 0009 04:36:08 Msec=750 True Az=81.525 Ze=-89.385 Az status=0009 Ze status=0009 04:36:09 Check angles 04:36:09 SkyScan query 04:36:09 SkyScan query done: ret=0 az=99.465<-6631 ze=-110.79<-19386 Statuses=0009 0009 04:36:09 Msec=1500 True Az=99.465 Ze=-110.79 Az status=0009 Ze status=0009 04:36:09 Check angles 04:36:09 SkyScan query 04:36:10 SkyScan query done: ret=0 az=116.85<-7790 ze=-131.715<-20781 Statuses=0009 0009 04:36:10 Msec=2250 True Az=116.85 Ze=-131.715 Az status=0009 Ze status=0009 04:36:10 Check angles 04:36:10 SkyScan query 04:36:11 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 04:36:11 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 04:36:11 Check angles 04:36:11 SkyScan query 04:36:11 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:36:11 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:36:11 Message to Master queued w/err=0: serial=262567 error=0 04:36:16 Received message from Master: op=Filter serial=262568 04:36:16 Color wheel filter change from 0 to 0 04:36:16 FLIGetFilterPos err=0 currentPosition=0 04:36:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:16 Filter is already there-color wheel unchanged 04:36:17 Received message from Master: op=Shutter serial=262569 04:36:17 Shutter LASER close 04:36:17 Received message from Camera: op=State serial=262571 04:36:17 GetSingleValue result=40 Value=cccccccc 04:36:17 SkyScan query 04:36:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:36:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:17 Parameters OK 04:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:17 Set A/D data flow result=40 04:36:17 Set A/D channel type result=40 04:36:17 Set A/D encoding result=40 04:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:17 Set channel filter=0.000000e+000 result=40 04:36:17 Config A/D Result=40 04:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:17 Get A/D filter: -9.255963e+061 result=40 04:36:17 Get A/D value=-858993460 result=40 04:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:17 Parameters OK 04:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:17 Set A/D data flow result=40 04:36:17 Set A/D channel type result=40 04:36:17 Set A/D encoding result=40 04:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:17 Set channel filter=0.000000e+000 result=40 04:36:17 Config A/D Result=40 04:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:17 Get A/D filter: -9.255963e+061 result=40 04:36:17 Get A/D value=-858993460 result=40 04:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:17 Aux= 04:36:17 Message to Camera, serial 262571 queued 04:36:54 Received message from Master: op=PointingHead serial=262584 04:36:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:36:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:36:54 Point started: ret=0 04:36:54 point_skyscan result=0 04:36:55 Check angles 04:36:55 SkyScan query 04:36:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 04:36:56 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 04:36:56 Check angles 04:36:56 SkyScan query 04:36:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:36:56 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:36:56 Message to Master queued w/err=0: serial=262584 error=0 04:37:01 Received message from Master: op=Filter serial=262585 04:37:01 Color wheel filter change from 0 to 0 04:37:01 FLIGetFilterPos err=0 currentPosition=0 04:37:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:01 Filter is already there-color wheel unchanged 04:37:02 Received message from Master: op=Shutter serial=262586 04:37:02 Shutter LASER open 04:37:02 Received message from Camera: op=State serial=262588 04:37:02 GetSingleValue result=40 Value=cccccccc 04:37:02 SkyScan query 04:37:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:37:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:02 Parameters OK 04:37:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:02 Set A/D data flow result=40 04:37:02 Set A/D channel type result=40 04:37:02 Set A/D encoding result=40 04:37:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:02 Set channel filter=0.000000e+000 result=40 04:37:02 Config A/D Result=40 04:37:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:02 Get A/D filter: -9.255963e+061 result=40 04:37:02 Get A/D value=-858993460 result=40 04:37:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:02 Parameters OK 04:37:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:02 Set A/D data flow result=40 04:37:02 Set A/D channel type result=40 04:37:02 Set A/D encoding result=40 04:37:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:02 Set channel filter=0.000000e+000 result=40 04:37:02 Config A/D Result=40 04:37:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:02 Get A/D filter: -9.255963e+061 result=40 04:37:02 Get A/D value=-858993460 result=40 04:37:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:02 Aux= 04:37:02 Message to Camera, serial 262588 queued 04:37:11 Received message from Master: op=Shutter serial=262598 04:37:11 Shutter LASER close 04:37:12 Received message from Master: op=PointingHead serial=262602 04:37:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:37:12 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:37:12 Point started: ret=0 04:37:12 point_skyscan result=0 04:37:13 Check angles 04:37:13 SkyScan query 04:37:13 SkyScan query done: ret=0 az=136.485<-9099 ze=-142.62<-21508 Statuses=0009 0009 04:37:13 Msec=0 True Az=136.485 Ze=-142.62 Az status=0009 Ze status=0009 04:37:13 Check angles 04:37:13 SkyScan query 04:37:14 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.695<-20113 Statuses=0009 0009 04:37:14 Msec=750 True Az=153.96 Ze=-121.695 Az status=0009 Ze status=0009 04:37:14 Check angles 04:37:14 SkyScan query 04:37:15 SkyScan query done: ret=0 az=171.78<-11452 ze=-100.23<-18682 Statuses=0009 0009 04:37:15 Msec=1500 True Az=171.78 Ze=-100.23 Az status=0009 Ze status=0009 04:37:15 Check angles 04:37:15 SkyScan query 04:37:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.275<-17285 Statuses=0008 0009 04:37:15 Msec=2250 True Az=176.01 Ze=-79.275 Az status=0008 Ze status=0009 04:37:16 Check angles 04:37:16 SkyScan query 04:37:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.32<-15888 Statuses=0008 0009 04:37:16 Msec=3000 True Az=176.01 Ze=-58.32 Az status=0008 Ze status=0009 04:37:16 Check angles 04:37:16 SkyScan query 04:37:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 04:37:17 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 04:37:17 Message to Master queued w/err=0: serial=262602 error=0 04:37:22 Received message from Master: op=Filter serial=262603 04:37:22 Color wheel filter change from 0 to 0 04:37:22 FLIGetFilterPos err=0 currentPosition=0 04:37:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:22 Filter is already there-color wheel unchanged 04:37:22 Received message from Master: op=Shutter serial=262604 04:37:22 Shutter LASER close 04:37:22 Received message from Camera: op=State serial=262606 04:37:22 GetSingleValue result=40 Value=cccccccc 04:37:22 SkyScan query 04:37:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:37:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:23 Parameters OK 04:37:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:23 Set A/D data flow result=40 04:37:23 Set A/D channel type result=40 04:37:23 Set A/D encoding result=40 04:37:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:23 Set channel filter=0.000000e+000 result=40 04:37:23 Config A/D Result=40 04:37:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:23 Get A/D filter: -9.255963e+061 result=40 04:37:23 Get A/D value=-858993460 result=40 04:37:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:23 Parameters OK 04:37:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:23 Set A/D data flow result=40 04:37:23 Set A/D channel type result=40 04:37:23 Set A/D encoding result=40 04:37:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:23 Set channel filter=0.000000e+000 result=40 04:37:23 Config A/D Result=40 04:37:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:23 Get A/D filter: -9.255963e+061 result=40 04:37:23 Get A/D value=-858993460 result=40 04:37:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:23 Aux= 04:37:23 Message to Camera, serial 262606 queued 04:38:00 Received message from Master: op=PointingHead serial=262619 04:38:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:38:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:38:00 Point started: ret=0 04:38:00 point_skyscan result=0 04:38:01 Check angles 04:38:01 SkyScan query 04:38:01 SkyScan query done: ret=0 az=153.165<-10211 ze=-22.005<-13467 Statuses=0009 0009 04:38:01 Msec=0 True Az=153.165 Ze=-22.005 Az status=0009 Ze status=0009 04:38:02 Check angles 04:38:02 SkyScan query 04:38:02 SkyScan query done: ret=0 az=135.735<-9049 ze=-1.005<-12067 Statuses=0009 0009 04:38:02 Msec=750 True Az=135.735 Ze=-1.005 Az status=0009 Ze status=0009 04:38:02 Check angles 04:38:02 SkyScan query 04:38:03 SkyScan query done: ret=0 az=117.795<-7853 ze=20.355<-10643 Statuses=0009 0009 04:38:03 Msec=1500 True Az=117.795 Ze=20.355 Az status=0009 Ze status=0009 04:38:03 Check angles 04:38:03 SkyScan query 04:38:04 SkyScan query done: ret=0 az=100.455<-6697 ze=41.355<-9243 Statuses=0009 0009 04:38:04 Msec=2250 True Az=100.455 Ze=41.355 Az status=0009 Ze status=0009 04:38:04 Check angles 04:38:04 SkyScan query 04:38:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 04:38:04 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 04:38:05 Check angles 04:38:05 SkyScan query 04:38:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:38:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:38:05 Message to Master queued w/err=0: serial=262619 error=0 04:38:10 Received message from Master: op=Filter serial=262620 04:38:10 Color wheel filter change from 0 to 0 04:38:10 FLIGetFilterPos err=0 currentPosition=0 04:38:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:10 Filter is already there-color wheel unchanged 04:38:10 Received message from Master: op=Shutter serial=262621 04:38:10 Shutter LASER close 04:38:11 Received message from Camera: op=State serial=262623 04:38:11 GetSingleValue result=40 Value=cccccccc 04:38:11 SkyScan query 04:38:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:38:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:11 Parameters OK 04:38:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:11 Set A/D data flow result=40 04:38:11 Set A/D channel type result=40 04:38:11 Set A/D encoding result=40 04:38:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:11 Set channel filter=0.000000e+000 result=40 04:38:11 Config A/D Result=40 04:38:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:11 Get A/D filter: -9.255963e+061 result=40 04:38:11 Get A/D value=-858993460 result=40 04:38:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:11 Parameters OK 04:38:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:11 Set A/D data flow result=40 04:38:11 Set A/D channel type result=40 04:38:11 Set A/D encoding result=40 04:38:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:11 Set channel filter=0.000000e+000 result=40 04:38:11 Config A/D Result=40 04:38:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:11 Get A/D filter: -9.255963e+061 result=40 04:38:11 Get A/D value=-858993460 result=40 04:38:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:11 Aux= 04:38:11 Message to Camera, serial 262623 queued 04:38:48 Received message from Master: op=PointingHead serial=262636 04:38:48 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:38:48 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:38:48 Point started: ret=0 04:38:48 point_skyscan result=0 04:38:49 Check angles 04:38:49 SkyScan query 04:38:50 SkyScan query done: ret=0 az=85.995<-5733 ze=21.615<-10559 Statuses=0008 0009 04:38:50 Msec=0 True Az=85.995 Ze=21.615 Az status=0008 Ze status=0009 04:38:50 Check angles 04:38:50 SkyScan query 04:38:50 SkyScan query done: ret=0 az=85.995<-5733 ze=0.255<-11983 Statuses=0008 0009 04:38:50 Msec=750 True Az=85.995 Ze=0.255 Az status=0008 Ze status=0009 04:38:51 Check angles 04:38:51 SkyScan query 04:38:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.12<-13408 Statuses=0008 0009 04:38:51 Msec=1500 True Az=85.995 Ze=-21.12 Az status=0008 Ze status=0009 04:38:51 Check angles 04:38:51 SkyScan query 04:38:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.09<-14806 Statuses=0008 0009 04:38:52 Msec=2250 True Az=85.995 Ze=-42.09 Az status=0008 Ze status=0009 04:38:52 Check angles 04:38:52 SkyScan query 04:38:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:38:53 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:38:53 Message to Master queued w/err=0: serial=262636 error=0 04:38:58 Received message from Master: op=Filter serial=262637 04:38:58 Color wheel filter change from 0 to 0 04:38:58 FLIGetFilterPos err=0 currentPosition=0 04:38:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:58 Filter is already there-color wheel unchanged 04:38:58 Received message from Master: op=Shutter serial=262638 04:38:58 Shutter LASER close 04:38:58 Received message from Camera: op=State serial=262640 04:38:58 GetSingleValue result=40 Value=cccccccc 04:38:58 SkyScan query 04:38:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:38:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:59 Parameters OK 04:38:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:59 Set A/D data flow result=40 04:38:59 Set A/D channel type result=40 04:38:59 Set A/D encoding result=40 04:38:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:59 Set channel filter=0.000000e+000 result=40 04:38:59 Config A/D Result=40 04:38:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:59 Get A/D filter: -9.255963e+061 result=40 04:38:59 Get A/D value=-858993460 result=40 04:38:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:59 Parameters OK 04:38:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:59 Set A/D data flow result=40 04:38:59 Set A/D channel type result=40 04:38:59 Set A/D encoding result=40 04:38:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:59 Set channel filter=0.000000e+000 result=40 04:38:59 Config A/D Result=40 04:38:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:59 Get A/D filter: -9.255963e+061 result=40 04:38:59 Get A/D value=-858993460 result=40 04:38:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:59 Aux= 04:38:59 Message to Camera, serial 262640 queued 04:39:35 Received message from Master: op=PointingHead serial=262653 04:39:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:39:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:39:36 Point started: ret=0 04:39:36 point_skyscan result=0 04:39:36 Check angles 04:39:36 SkyScan query 04:39:37 SkyScan query done: ret=0 az=109.05<-7270 ze=-81.495<-17433 Statuses=0009 0009 04:39:37 Msec=0 True Az=109.05 Ze=-81.495 Az status=0009 Ze status=0009 04:39:37 Check angles 04:39:37 SkyScan query 04:39:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.69<-18846 Statuses=0008 0009 04:39:38 Msec=750 True Az=112.995 Ze=-102.69 Az status=0008 Ze status=0009 04:39:38 Check angles 04:39:38 SkyScan query 04:39:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.08<-20272 Statuses=0008 0009 04:39:39 Msec=1500 True Az=112.995 Ze=-124.08 Az status=0008 Ze status=0009 04:39:39 Check angles 04:39:39 SkyScan query 04:39:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 04:39:39 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 04:39:39 Check angles 04:39:39 SkyScan query 04:39:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.44<-23096 Statuses=0008 0009 04:39:40 Msec=3000 True Az=112.995 Ze=-166.44 Az status=0008 Ze status=0009 04:39:40 Check angles 04:39:40 SkyScan query 04:39:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:39:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:39:41 Message to Master queued w/err=0: serial=262653 error=0 04:39:46 Received message from Master: op=Filter serial=262654 04:39:46 Color wheel filter change from 0 to 0 04:39:46 FLIGetFilterPos err=0 currentPosition=0 04:39:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:46 Filter is already there-color wheel unchanged 04:39:46 Received message from Master: op=Shutter serial=262655 04:39:46 Shutter LASER open 04:39:46 Received message from Camera: op=State serial=262657 04:39:46 GetSingleValue result=40 Value=cccccccc 04:39:46 SkyScan query 04:39:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:39:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:47 Parameters OK 04:39:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:47 Set A/D data flow result=40 04:39:47 Set A/D channel type result=40 04:39:47 Set A/D encoding result=40 04:39:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:47 Set channel filter=0.000000e+000 result=40 04:39:47 Config A/D Result=40 04:39:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:47 Get A/D filter: -9.255963e+061 result=40 04:39:47 Get A/D value=-858993460 result=40 04:39:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:47 Parameters OK 04:39:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:47 Set A/D data flow result=40 04:39:47 Set A/D channel type result=40 04:39:47 Set A/D encoding result=40 04:39:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:47 Set channel filter=0.000000e+000 result=40 04:39:47 Config A/D Result=40 04:39:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:47 Get A/D filter: -9.255963e+061 result=40 04:39:47 Get A/D value=-858993460 result=40 04:39:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:47 Aux= 04:39:47 Message to Camera, serial 262657 queued 04:39:55 Received message from Master: op=Shutter serial=262667 04:39:55 Shutter LASER close 04:39:56 Received message from Master: op=PointingHead serial=262671 04:39:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:39:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:39:56 Point started: ret=0 04:39:56 point_skyscan result=0 04:39:57 Check angles 04:39:57 SkyScan query 04:39:57 SkyScan query done: ret=0 az=89.955<-5997 ze=157.44<-1504 Statuses=0009 0009 04:39:57 Msec=0 True Az=89.955 Ze=157.44 Az status=0009 Ze status=0009 04:39:57 Check angles 04:39:57 SkyScan query 04:39:58 SkyScan query done: ret=0 az=72.585<-4839 ze=136.47<-2902 Statuses=0009 0009 04:39:58 Msec=750 True Az=72.585 Ze=136.47 Az status=0009 Ze status=0009 04:39:58 Check angles 04:39:58 SkyScan query 04:39:59 SkyScan query done: ret=0 az=55.14<-3676 ze=115.575<-4295 Statuses=0009 0009 04:39:59 Msec=1500 True Az=55.14 Ze=115.575 Az status=0009 Ze status=0009 04:39:59 Check angles 04:39:59 SkyScan query 04:40:00 SkyScan query done: ret=0 az=41.01<-2734 ze=94.575<-5695 Statuses=0009 0009 04:40:00 Msec=2250 True Az=41.01 Ze=94.575 Az status=0009 Ze status=0009 04:40:00 Check angles 04:40:00 SkyScan query 04:40:00 SkyScan query done: ret=0 az=40.995<-2733 ze=73.65<-7090 Statuses=0008 0009 04:40:00 Msec=3000 True Az=40.995 Ze=73.65 Az status=0008 Ze status=0009 04:40:00 Check angles 04:40:00 SkyScan query 04:40:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 04:40:01 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 04:40:01 Check angles 04:40:01 SkyScan query 04:40:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:40:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:40:02 Message to Master queued w/err=0: serial=262671 error=0 04:40:07 Received message from Master: op=Filter serial=262672 04:40:07 Color wheel filter change from 0 to 0 04:40:07 FLIGetFilterPos err=0 currentPosition=0 04:40:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:07 Filter is already there-color wheel unchanged 04:40:07 Received message from Master: op=Shutter serial=262673 04:40:07 Shutter LASER close 04:40:07 Received message from Camera: op=State serial=262675 04:40:07 GetSingleValue result=40 Value=cccccccc 04:40:07 SkyScan query 04:40:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:40:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:08 Parameters OK 04:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:08 Set A/D data flow result=40 04:40:08 Set A/D channel type result=40 04:40:08 Set A/D encoding result=40 04:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:08 Set channel filter=0.000000e+000 result=40 04:40:08 Config A/D Result=40 04:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:08 Get A/D filter: -9.255963e+061 result=40 04:40:08 Get A/D value=-858993460 result=40 04:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:08 Parameters OK 04:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:08 Set A/D data flow result=40 04:40:08 Set A/D channel type result=40 04:40:08 Set A/D encoding result=40 04:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:08 Set channel filter=0.000000e+000 result=40 04:40:08 Config A/D Result=40 04:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:08 Get A/D filter: -9.255963e+061 result=40 04:40:08 Get A/D value=-858993460 result=40 04:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:08 Aux= 04:40:08 Message to Camera, serial 262675 queued 04:40:45 Received message from Master: op=PointingHead serial=262688 04:40:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:40:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:40:45 Point started: ret=0 04:40:45 point_skyscan result=0 04:40:46 Check angles 04:40:46 SkyScan query 04:40:46 SkyScan query done: ret=0 az=40.995<-2733 ze=21.6<-10560 Statuses=0008 0009 04:40:46 Msec=0 True Az=40.995 Ze=21.6 Az status=0008 Ze status=0009 04:40:47 Check angles 04:40:47 SkyScan query 04:40:47 SkyScan query done: ret=0 az=40.995<-2733 ze=0.615<-11959 Statuses=0008 0009 04:40:47 Msec=750 True Az=40.995 Ze=0.615 Az status=0008 Ze status=0009 04:40:47 Check angles 04:40:47 SkyScan query 04:40:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.31<-13354 Statuses=0008 0009 04:40:48 Msec=1500 True Az=40.995 Ze=-20.31 Az status=0008 Ze status=0009 04:40:48 Check angles 04:40:48 SkyScan query 04:40:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 04:40:49 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 04:40:49 Check angles 04:40:49 SkyScan query 04:40:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:40:49 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:40:49 Message to Master queued w/err=0: serial=262688 error=0 04:40:54 Received message from Master: op=Filter serial=262689 04:40:54 Color wheel filter change from 0 to 0 04:40:54 FLIGetFilterPos err=0 currentPosition=0 04:40:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:54 Filter is already there-color wheel unchanged 04:40:55 Received message from Master: op=Shutter serial=262690 04:40:55 Shutter LASER close 04:40:55 Received message from Camera: op=State serial=262692 04:40:55 GetSingleValue result=40 Value=cccccccc 04:40:55 SkyScan query 04:40:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:40:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:55 Parameters OK 04:40:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:55 Set A/D data flow result=40 04:40:55 Set A/D channel type result=40 04:40:55 Set A/D encoding result=40 04:40:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:55 Set channel filter=0.000000e+000 result=40 04:40:55 Config A/D Result=40 04:40:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:55 Get A/D filter: -9.255963e+061 result=40 04:40:55 Get A/D value=-858993460 result=40 04:40:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:55 Parameters OK 04:40:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:55 Set A/D data flow result=40 04:40:55 Set A/D channel type result=40 04:40:55 Set A/D encoding result=40 04:40:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:55 Set channel filter=0.000000e+000 result=40 04:40:55 Config A/D Result=40 04:40:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:55 Get A/D filter: -9.255963e+061 result=40 04:40:55 Get A/D value=-858993460 result=40 04:40:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:55 Aux= 04:40:55 Message to Camera, serial 262692 queued 04:41:32 Received message from Master: op=PointingHead serial=262705 04:41:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:41:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:41:32 Point started: ret=0 04:41:32 point_skyscan result=0 04:41:33 Check angles 04:41:33 SkyScan query 04:41:34 SkyScan query done: ret=0 az=64.11<-4274 ze=-68.385<-16559 Statuses=0009 0009 04:41:34 Msec=0 True Az=64.11 Ze=-68.385 Az status=0009 Ze status=0009 04:41:34 Check angles 04:41:34 SkyScan query 04:41:34 SkyScan query done: ret=0 az=81.42<-5428 ze=-89.4<-17960 Statuses=0009 0009 04:41:34 Msec=750 True Az=81.42 Ze=-89.4 Az status=0009 Ze status=0009 04:41:35 Check angles 04:41:35 SkyScan query 04:41:35 SkyScan query done: ret=0 az=99<-6600 ze=-110.325<-19355 Statuses=0009 0009 04:41:35 Msec=1500 True Az=99 Ze=-110.325 Az status=0009 Ze status=0009 04:41:35 Check angles 04:41:35 SkyScan query 04:41:36 SkyScan query done: ret=0 az=116.385<-7759 ze=-131.265<-20751 Statuses=0009 0009 04:41:36 Msec=2250 True Az=116.385 Ze=-131.265 Az status=0009 Ze status=0009 04:41:36 Check angles 04:41:36 SkyScan query 04:41:37 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 04:41:37 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 04:41:37 Check angles 04:41:37 SkyScan query 04:41:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 04:41:37 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 04:41:37 Message to Master queued w/err=0: serial=262705 error=0 04:41:42 Received message from Master: op=Filter serial=262706 04:41:42 Color wheel filter change from 0 to 0 04:41:42 FLIGetFilterPos err=0 currentPosition=0 04:41:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:42 Filter is already there-color wheel unchanged 04:41:43 Received message from Master: op=Shutter serial=262707 04:41:43 Shutter LASER close 04:41:43 Received message from Camera: op=State serial=262709 04:41:43 GetSingleValue result=40 Value=cccccccc 04:41:43 SkyScan query 04:41:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:41:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:43 Parameters OK 04:41:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:43 Set A/D data flow result=40 04:41:43 Set A/D channel type result=40 04:41:43 Set A/D encoding result=40 04:41:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:43 Set channel filter=0.000000e+000 result=40 04:41:43 Config A/D Result=40 04:41:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:43 Get A/D filter: -9.255963e+061 result=40 04:41:43 Get A/D value=-858993460 result=40 04:41:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:43 Parameters OK 04:41:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:43 Set A/D data flow result=40 04:41:43 Set A/D channel type result=40 04:41:43 Set A/D encoding result=40 04:41:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:43 Set channel filter=0.000000e+000 result=40 04:41:43 Config A/D Result=40 04:41:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:43 Get A/D filter: -9.255963e+061 result=40 04:41:43 Get A/D value=-858993460 result=40 04:41:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:43 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:43 Aux= 04:41:43 Message to Camera, serial 262709 queued 04:42:20 Received message from Master: op=PointingHead serial=262722 04:42:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:42:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:42:20 Point started: ret=0 04:42:20 point_skyscan result=0 04:42:21 Check angles 04:42:21 SkyScan query 04:42:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 04:42:22 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 04:42:22 Check angles 04:42:22 SkyScan query 04:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:42:22 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:42:22 Message to Master queued w/err=0: serial=262722 error=0 04:42:27 Received message from Master: op=Filter serial=262723 04:42:27 Color wheel filter change from 0 to 0 04:42:27 FLIGetFilterPos err=0 currentPosition=0 04:42:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:27 Filter is already there-color wheel unchanged 04:42:28 Received message from Master: op=Shutter serial=262724 04:42:28 Shutter LASER open 04:42:28 Received message from Camera: op=State serial=262726 04:42:28 GetSingleValue result=40 Value=cccccccc 04:42:28 SkyScan query 04:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:42:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:28 Parameters OK 04:42:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:28 Set A/D data flow result=40 04:42:28 Set A/D channel type result=40 04:42:28 Set A/D encoding result=40 04:42:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:28 Set channel filter=0.000000e+000 result=40 04:42:28 Config A/D Result=40 04:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:28 Get A/D filter: -9.255963e+061 result=40 04:42:28 Get A/D value=-858993460 result=40 04:42:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:28 Parameters OK 04:42:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:28 Set A/D data flow result=40 04:42:28 Set A/D channel type result=40 04:42:28 Set A/D encoding result=40 04:42:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:28 Set channel filter=0.000000e+000 result=40 04:42:28 Config A/D Result=40 04:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:28 Get A/D filter: -9.255963e+061 result=40 04:42:28 Get A/D value=-858993460 result=40 04:42:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:28 Aux= 04:42:28 Message to Camera, serial 262726 queued 04:42:36 Received message from Master: op=Shutter serial=262735 04:42:36 Shutter LASER close 04:42:37 Received message from Master: op=PointingHead serial=262739 04:42:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:42:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:42:37 Point started: ret=0 04:42:37 point_skyscan result=0 04:42:38 Check angles 04:42:38 SkyScan query 04:42:38 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.295<-21553 Statuses=0009 0009 04:42:38 Msec=0 True Az=135.945 Ze=-143.295 Az status=0009 Ze status=0009 04:42:38 Check angles 04:42:38 SkyScan query 04:42:39 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.31<-20154 Statuses=0009 0009 04:42:39 Msec=750 True Az=153.42 Ze=-122.31 Az status=0009 Ze status=0009 04:42:39 Check angles 04:42:39 SkyScan query 04:42:40 SkyScan query done: ret=0 az=171.315<-11421 ze=-100.875<-18725 Statuses=0009 0009 04:42:40 Msec=1500 True Az=171.315 Ze=-100.875 Az status=0009 Ze status=0009 04:42:40 Check angles 04:42:40 SkyScan query 04:42:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.025<-17335 Statuses=0008 0009 04:42:40 Msec=2250 True Az=176.01 Ze=-80.025 Az status=0008 Ze status=0009 04:42:41 Check angles 04:42:41 SkyScan query 04:42:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.545<-15903 Statuses=0008 0009 04:42:41 Msec=3000 True Az=176.01 Ze=-58.545 Az status=0008 Ze status=0009 04:42:41 Check angles 04:42:41 SkyScan query 04:42:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:42:42 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:42:42 Message to Master queued w/err=0: serial=262739 error=0 04:42:47 Received message from Master: op=Filter serial=262740 04:42:47 Color wheel filter change from 0 to 0 04:42:47 FLIGetFilterPos err=0 currentPosition=0 04:42:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:47 Filter is already there-color wheel unchanged 04:42:47 Received message from Master: op=Shutter serial=262741 04:42:47 Shutter LASER close 04:42:47 Received message from Camera: op=State serial=262743 04:42:47 GetSingleValue result=40 Value=cccccccc 04:42:47 SkyScan query 04:42:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:42:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:48 Parameters OK 04:42:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:48 Set A/D data flow result=40 04:42:48 Set A/D channel type result=40 04:42:48 Set A/D encoding result=40 04:42:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:48 Set channel filter=0.000000e+000 result=40 04:42:48 Config A/D Result=40 04:42:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:48 Get A/D filter: -9.255963e+061 result=40 04:42:48 Get A/D value=-858993460 result=40 04:42:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:48 Parameters OK 04:42:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:48 Set A/D data flow result=40 04:42:48 Set A/D channel type result=40 04:42:48 Set A/D encoding result=40 04:42:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:48 Set channel filter=0.000000e+000 result=40 04:42:48 Config A/D Result=40 04:42:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:48 Get A/D filter: -9.255963e+061 result=40 04:42:48 Get A/D value=-858993460 result=40 04:42:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:48 Aux= 04:42:48 Message to Camera, serial 262743 queued 04:43:25 Received message from Master: op=PointingHead serial=262756 04:43:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:43:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:43:25 Point started: ret=0 04:43:25 point_skyscan result=0 04:43:26 Check angles 04:43:26 SkyScan query 04:43:26 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.975<-13465 Statuses=0009 0009 04:43:26 Msec=0 True Az=153.12 Ze=-21.975 Az status=0009 Ze status=0009 04:43:27 Check angles 04:43:27 SkyScan query 04:43:27 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.975<-12065 Statuses=0009 0009 04:43:27 Msec=750 True Az=135.735 Ze=-0.975 Az status=0009 Ze status=0009 04:43:27 Check angles 04:43:27 SkyScan query 04:43:28 SkyScan query done: ret=0 az=117.735<-7849 ze=20.415<-10639 Statuses=0009 0009 04:43:28 Msec=1500 True Az=117.735 Ze=20.415 Az status=0009 Ze status=0009 04:43:28 Check angles 04:43:28 SkyScan query 04:43:29 SkyScan query done: ret=0 az=100.395<-6693 ze=41.385<-9241 Statuses=0009 0009 04:43:29 Msec=2250 True Az=100.395 Ze=41.385 Az status=0009 Ze status=0009 04:43:29 Check angles 04:43:29 SkyScan query 04:43:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 04:43:29 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 04:43:30 Check angles 04:43:30 SkyScan query 04:43:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:43:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:43:30 Message to Master queued w/err=0: serial=262756 error=0 04:43:35 Received message from Master: op=Filter serial=262757 04:43:35 Color wheel filter change from 0 to 0 04:43:35 FLIGetFilterPos err=0 currentPosition=0 04:43:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:35 Filter is already there-color wheel unchanged 04:43:35 Received message from Master: op=Shutter serial=262758 04:43:35 Shutter LASER close 04:43:35 Received message from Camera: op=State serial=262760 04:43:35 GetSingleValue result=40 Value=cccccccc 04:43:35 SkyScan query 04:43:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:43:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:36 Parameters OK 04:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:36 Set A/D data flow result=40 04:43:36 Set A/D channel type result=40 04:43:36 Set A/D encoding result=40 04:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:36 Set channel filter=0.000000e+000 result=40 04:43:36 Config A/D Result=40 04:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:36 Get A/D filter: -9.255963e+061 result=40 04:43:36 Get A/D value=-858993460 result=40 04:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:36 Parameters OK 04:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:36 Set A/D data flow result=40 04:43:36 Set A/D channel type result=40 04:43:36 Set A/D encoding result=40 04:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:36 Set channel filter=0.000000e+000 result=40 04:43:36 Config A/D Result=40 04:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:36 Get A/D filter: -9.255963e+061 result=40 04:43:36 Get A/D value=-858993460 result=40 04:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:36 Aux= 04:43:36 Message to Camera, serial 262760 queued 04:44:13 Received message from Master: op=PointingHead serial=262773 04:44:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:44:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:44:13 Point started: ret=0 04:44:13 point_skyscan result=0 04:44:14 Check angles 04:44:14 SkyScan query 04:44:15 SkyScan query done: ret=0 az=85.995<-5733 ze=21.42<-10572 Statuses=0008 0009 04:44:15 Msec=0 True Az=85.995 Ze=21.42 Az status=0008 Ze status=0009 04:44:15 Check angles 04:44:15 SkyScan query 04:44:15 SkyScan query done: ret=0 az=85.995<-5733 ze=0.48<-11968 Statuses=0008 0009 04:44:15 Msec=750 True Az=85.995 Ze=0.48 Az status=0008 Ze status=0009 04:44:16 Check angles 04:44:16 SkyScan query 04:44:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.49<-13366 Statuses=0008 0009 04:44:16 Msec=1500 True Az=85.995 Ze=-20.49 Az status=0008 Ze status=0009 04:44:16 Check angles 04:44:16 SkyScan query 04:44:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.4<-14760 Statuses=0008 0009 04:44:17 Msec=2250 True Az=85.995 Ze=-41.4 Az status=0008 Ze status=0009 04:44:17 Check angles 04:44:17 SkyScan query 04:44:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:44:18 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:44:18 Message to Master queued w/err=0: serial=262773 error=0 04:44:23 Received message from Master: op=Filter serial=262774 04:44:23 Color wheel filter change from 0 to 0 04:44:23 FLIGetFilterPos err=0 currentPosition=0 04:44:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:23 Filter is already there-color wheel unchanged 04:44:23 Received message from Master: op=Shutter serial=262775 04:44:23 Shutter LASER close 04:44:23 Received message from Camera: op=State serial=262777 04:44:23 GetSingleValue result=40 Value=cccccccc 04:44:23 SkyScan query 04:44:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:44:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:23 Parameters OK 04:44:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:23 Set A/D data flow result=40 04:44:23 Set A/D channel type result=40 04:44:23 Set A/D encoding result=40 04:44:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:23 Set channel filter=0.000000e+000 result=40 04:44:23 Config A/D Result=40 04:44:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:23 Get A/D filter: -9.255963e+061 result=40 04:44:23 Get A/D value=-858993460 result=40 04:44:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:23 Parameters OK 04:44:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:23 Set A/D data flow result=40 04:44:23 Set A/D channel type result=40 04:44:23 Set A/D encoding result=40 04:44:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:23 Set channel filter=0.000000e+000 result=40 04:44:23 Config A/D Result=40 04:44:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:23 Get A/D filter: -9.255963e+061 result=40 04:44:23 Get A/D value=-858993460 result=40 04:44:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:23 Aux= 04:44:23 Message to Camera, serial 262777 queued 04:45:00 Received message from Master: op=PointingHead serial=262790 04:45:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:45:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:45:01 Point started: ret=0 04:45:01 point_skyscan result=0 04:45:01 Check angles 04:45:01 SkyScan query 04:45:02 SkyScan query done: ret=0 az=108.765<-7251 ze=-81.015<-17401 Statuses=0009 0009 04:45:02 Msec=0 True Az=108.765 Ze=-81.015 Az status=0009 Ze status=0009 04:45:02 Check angles 04:45:02 SkyScan query 04:45:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 04:45:03 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 04:45:03 Check angles 04:45:03 SkyScan query 04:45:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.94<-20196 Statuses=0008 0009 04:45:03 Msec=1500 True Az=112.995 Ze=-122.94 Az status=0008 Ze status=0009 04:45:04 Check angles 04:45:04 SkyScan query 04:45:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 04:45:04 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 04:45:04 Check angles 04:45:04 SkyScan query 04:45:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 04:45:05 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 04:45:05 Check angles 04:45:05 SkyScan query 04:45:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:45:06 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:45:06 Message to Master queued w/err=0: serial=262790 error=0 04:45:11 Received message from Master: op=Filter serial=262791 04:45:11 Color wheel filter change from 0 to 0 04:45:11 FLIGetFilterPos err=0 currentPosition=0 04:45:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:11 Filter is already there-color wheel unchanged 04:45:11 Received message from Master: op=Shutter serial=262792 04:45:11 Shutter LASER open 04:45:11 Received message from Camera: op=State serial=262794 04:45:11 GetSingleValue result=40 Value=cccccccc 04:45:11 SkyScan query 04:45:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:45:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:12 Parameters OK 04:45:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:12 Set A/D data flow result=40 04:45:12 Set A/D channel type result=40 04:45:12 Set A/D encoding result=40 04:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:12 Set channel filter=0.000000e+000 result=40 04:45:12 Config A/D Result=40 04:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:12 Get A/D filter: -9.255963e+061 result=40 04:45:12 Get A/D value=-858993460 result=40 04:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:12 Parameters OK 04:45:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:12 Set A/D data flow result=40 04:45:12 Set A/D channel type result=40 04:45:12 Set A/D encoding result=40 04:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:12 Set channel filter=0.000000e+000 result=40 04:45:12 Config A/D Result=40 04:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:12 Get A/D filter: -9.255963e+061 result=40 04:45:12 Get A/D value=-858993460 result=40 04:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:12 Aux= 04:45:12 Message to Camera, serial 262794 queued 04:45:20 Received message from Master: op=Shutter serial=262804 04:45:20 Shutter LASER close 04:45:20 Received message from Master: op=PointingHead serial=262808 04:45:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:45:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:45:21 Point started: ret=0 04:45:21 point_skyscan result=0 04:45:22 Check angles 04:45:22 SkyScan query 04:45:22 SkyScan query done: ret=0 az=89.64<-5976 ze=156.87<-1542 Statuses=0009 0009 04:45:22 Msec=0 True Az=89.64 Ze=156.87 Az status=0009 Ze status=0009 04:45:22 Check angles 04:45:22 SkyScan query 04:45:23 SkyScan query done: ret=0 az=71.82<-4788 ze=135.51<-2966 Statuses=0009 0009 04:45:23 Msec=750 True Az=71.82 Ze=135.51 Az status=0009 Ze status=0009 04:45:23 Check angles 04:45:23 SkyScan query 04:45:24 SkyScan query done: ret=0 az=54.315<-3621 ze=114.465<-4369 Statuses=0009 0009 04:45:24 Msec=1500 True Az=54.315 Ze=114.465 Az status=0009 Ze status=0009 04:45:24 Check angles 04:45:24 SkyScan query 04:45:24 SkyScan query done: ret=0 az=40.98<-2732 ze=93.6<-5760 Statuses=0009 0009 04:45:24 Msec=2250 True Az=40.98 Ze=93.6 Az status=0009 Ze status=0009 04:45:25 Check angles 04:45:25 SkyScan query 04:45:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 04:45:25 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 04:45:25 Check angles 04:45:25 SkyScan query 04:45:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 04:45:26 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 04:45:26 Check angles 04:45:26 SkyScan query 04:45:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:45:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:45:27 Message to Master queued w/err=0: serial=262808 error=0 04:45:27 Received message from Master: op=Identify serial=262809 04:45:32 Received message from Master: op=Filter serial=262812 04:45:32 Color wheel filter change from 0 to 0 [UTC 2018-12-19 04:45:32] 04:45:32 FLIGetFilterPos err=0 currentPosition=0 04:45:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:32 Filter is already there-color wheel unchanged 04:45:32 Received message from Master: op=Shutter serial=262813 04:45:32 Shutter LASER close 04:45:32 Received message from Camera: op=State serial=262815 04:45:32 GetSingleValue result=40 Value=cccccccc 04:45:32 SkyScan query 04:45:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:45:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:33 Parameters OK 04:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:33 Set A/D data flow result=40 04:45:33 Set A/D channel type result=40 04:45:33 Set A/D encoding result=40 04:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:33 Set channel filter=0.000000e+000 result=40 04:45:33 Config A/D Result=40 04:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:33 Get A/D filter: -9.255963e+061 result=40 04:45:33 Get A/D value=-858993460 result=40 04:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:33 Parameters OK 04:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:33 Set A/D data flow result=40 04:45:33 Set A/D channel type result=40 04:45:33 Set A/D encoding result=40 04:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:33 Set channel filter=0.000000e+000 result=40 04:45:33 Config A/D Result=40 04:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:33 Get A/D filter: -9.255963e+061 result=40 04:45:33 Get A/D value=-858993460 result=40 04:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:33 Aux= 04:45:33 Message to Camera, serial 262815 queued 04:46:10 Received message from Master: op=PointingHead serial=262828 04:46:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:46:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:46:10 Point started: ret=0 04:46:10 point_skyscan result=0 04:46:11 Check angles 04:46:11 SkyScan query 04:46:11 SkyScan query done: ret=0 az=40.995<-2733 ze=21.3<-10580 Statuses=0008 0009 04:46:11 Msec=0 True Az=40.995 Ze=21.3 Az status=0008 Ze status=0009 04:46:12 Check angles 04:46:12 SkyScan query 04:46:12 SkyScan query done: ret=0 az=40.995<-2733 ze=0.285<-11981 Statuses=0008 0009 04:46:12 Msec=750 True Az=40.995 Ze=0.285 Az status=0008 Ze status=0009 04:46:12 Check angles 04:46:12 SkyScan query 04:46:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.135<-13409 Statuses=0008 0009 04:46:13 Msec=1500 True Az=40.995 Ze=-21.135 Az status=0008 Ze status=0009 04:46:13 Check angles 04:46:13 SkyScan query 04:46:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 04:46:14 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 04:46:14 Check angles 04:46:14 SkyScan query 04:46:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:46:14 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:46:14 Message to Master queued w/err=0: serial=262828 error=0 04:46:19 Received message from Master: op=Filter serial=262829 04:46:19 Color wheel filter change from 0 to 0 04:46:19 FLIGetFilterPos err=0 currentPosition=0 04:46:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:19 Filter is already there-color wheel unchanged 04:46:20 Received message from Master: op=Shutter serial=262830 04:46:20 Shutter LASER close 04:46:20 Received message from Camera: op=State serial=262832 04:46:20 GetSingleValue result=40 Value=cccccccc 04:46:20 SkyScan query 04:46:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:46:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:20 Parameters OK 04:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:20 Set A/D data flow result=40 04:46:20 Set A/D channel type result=40 04:46:20 Set A/D encoding result=40 04:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:20 Set channel filter=0.000000e+000 result=40 04:46:20 Config A/D Result=40 04:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:20 Get A/D filter: -9.255963e+061 result=40 04:46:20 Get A/D value=-858993460 result=40 04:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:20 Parameters OK 04:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:20 Set A/D data flow result=40 04:46:20 Set A/D channel type result=40 04:46:20 Set A/D encoding result=40 04:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:20 Set channel filter=0.000000e+000 result=40 04:46:20 Config A/D Result=40 04:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:20 Get A/D filter: -9.255963e+061 result=40 04:46:20 Get A/D value=-858993460 result=40 04:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:20 Aux= 04:46:20 Message to Camera, serial 262832 queued 04:46:57 Received message from Master: op=PointingHead serial=262845 04:46:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:46:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:46:57 Point started: ret=0 04:46:57 point_skyscan result=0 04:46:58 Check angles 04:46:58 SkyScan query 04:46:59 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.535<-16569 Statuses=0009 0009 04:46:59 Msec=0 True Az=64.275 Ze=-68.535 Az status=0009 Ze status=0009 04:46:59 Check angles 04:46:59 SkyScan query 04:47:00 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.55<-17970 Statuses=0009 0009 04:47:00 Msec=750 True Az=81.585 Ze=-89.55 Az status=0009 Ze status=0009 04:47:00 Check angles 04:47:00 SkyScan query 04:47:00 SkyScan query done: ret=0 az=99.3<-6620 ze=-110.49<-19366 Statuses=0009 0009 04:47:00 Msec=1500 True Az=99.3 Ze=-110.49 Az status=0009 Ze status=0009 04:47:00 Check angles 04:47:00 SkyScan query 04:47:01 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.82<-20788 Statuses=0009 0009 04:47:01 Msec=2250 True Az=117.03 Ze=-131.82 Az status=0009 Ze status=0009 04:47:01 Check angles 04:47:01 SkyScan query 04:47:02 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 04:47:02 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 04:47:02 Check angles 04:47:02 SkyScan query 04:47:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:47:03 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:47:03 Message to Master queued w/err=0: serial=262845 error=0 04:47:08 Received message from Master: op=Filter serial=262846 04:47:08 Color wheel filter change from 0 to 0 04:47:08 FLIGetFilterPos err=0 currentPosition=0 04:47:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:08 Filter is already there-color wheel unchanged 04:47:08 Received message from Master: op=Shutter serial=262847 04:47:08 Shutter LASER close 04:47:08 Received message from Camera: op=State serial=262849 04:47:08 GetSingleValue result=40 Value=cccccccc 04:47:08 SkyScan query 04:47:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:47:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:08 Parameters OK 04:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:08 Set A/D data flow result=40 04:47:08 Set A/D channel type result=40 04:47:08 Set A/D encoding result=40 04:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:08 Set channel filter=0.000000e+000 result=40 04:47:08 Config A/D Result=40 04:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:08 Get A/D filter: -9.255963e+061 result=40 04:47:08 Get A/D value=-858993460 result=40 04:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:08 Parameters OK 04:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:08 Set A/D data flow result=40 04:47:08 Set A/D channel type result=40 04:47:08 Set A/D encoding result=40 04:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:08 Set channel filter=0.000000e+000 result=40 04:47:08 Config A/D Result=40 04:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:08 Get A/D filter: -9.255963e+061 result=40 04:47:08 Get A/D value=-858993460 result=40 04:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:08 Aux= 04:47:08 Message to Camera, serial 262849 queued 04:47:45 Received message from Master: op=PointingHead serial=262862 04:47:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:47:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:47:46 Point started: ret=0 04:47:46 point_skyscan result=0 04:47:46 Check angles 04:47:46 SkyScan query 04:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0009 0009 04:47:47 Msec=0 True Az=112.995 Ze=-171.105 Az status=0009 Ze status=0009 04:47:47 Check angles 04:47:47 SkyScan query 04:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:47:48 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:47:48 Message to Master queued w/err=0: serial=262862 error=0 04:47:53 Received message from Master: op=Filter serial=262863 04:47:53 Color wheel filter change from 0 to 0 04:47:53 FLIGetFilterPos err=0 currentPosition=0 04:47:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:53 Filter is already there-color wheel unchanged 04:47:53 Received message from Master: op=Shutter serial=262864 04:47:53 Shutter LASER open 04:47:53 Received message from Camera: op=State serial=262866 04:47:53 GetSingleValue result=40 Value=cccccccc 04:47:53 SkyScan query 04:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:47:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:54 Parameters OK 04:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:54 Set A/D data flow result=40 04:47:54 Set A/D channel type result=40 04:47:54 Set A/D encoding result=40 04:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:54 Set channel filter=0.000000e+000 result=40 04:47:54 Config A/D Result=40 04:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:54 Get A/D filter: -9.255963e+061 result=40 04:47:54 Get A/D value=-858993460 result=40 04:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:54 Parameters OK 04:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:54 Set A/D data flow result=40 04:47:54 Set A/D channel type result=40 04:47:54 Set A/D encoding result=40 04:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:54 Set channel filter=0.000000e+000 result=40 04:47:54 Config A/D Result=40 04:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:54 Get A/D filter: -9.255963e+061 result=40 04:47:54 Get A/D value=-858993460 result=40 04:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:54 Aux= 04:47:54 Message to Camera, serial 262866 queued 04:48:02 Received message from Master: op=Shutter serial=262876 04:48:02 Shutter LASER close 04:48:03 Received message from Master: op=PointingHead serial=262880 04:48:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:48:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:48:03 Point started: ret=0 04:48:03 point_skyscan result=0 04:48:04 Check angles 04:48:04 SkyScan query 04:48:04 SkyScan query done: ret=0 az=136.08<-9072 ze=-143.145<-21543 Statuses=0009 0009 04:48:04 Msec=0 True Az=136.08 Ze=-143.145 Az status=0009 Ze status=0009 04:48:04 Check angles 04:48:04 SkyScan query 04:48:05 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.085<-20139 Statuses=0009 0009 04:48:05 Msec=750 True Az=153.615 Ze=-122.085 Az status=0009 Ze status=0009 04:48:05 Check angles 04:48:05 SkyScan query 04:48:06 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.22<-18748 Statuses=0009 0009 04:48:06 Msec=1500 True Az=171.135 Ze=-101.22 Az status=0009 Ze status=0009 04:48:06 Check angles 04:48:06 SkyScan query 04:48:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.295<-17353 Statuses=0008 0009 04:48:07 Msec=2250 True Az=176.01 Ze=-80.295 Az status=0008 Ze status=0009 04:48:07 Check angles 04:48:07 SkyScan query 04:48:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 04:48:07 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 04:48:07 Check angles 04:48:07 SkyScan query 04:48:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:48:08 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:48:08 Message to Master queued w/err=0: serial=262880 error=0 04:48:13 Received message from Master: op=Filter serial=262881 04:48:13 Color wheel filter change from 0 to 0 04:48:13 FLIGetFilterPos err=0 currentPosition=0 04:48:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:13 Filter is already there-color wheel unchanged 04:48:13 Received message from Master: op=Shutter serial=262882 04:48:13 Shutter LASER close 04:48:13 Received message from Camera: op=State serial=262884 04:48:13 GetSingleValue result=40 Value=cccccccc 04:48:13 SkyScan query 04:48:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:48:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:14 Parameters OK 04:48:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:14 Set A/D data flow result=40 04:48:14 Set A/D channel type result=40 04:48:14 Set A/D encoding result=40 04:48:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:14 Set channel filter=0.000000e+000 result=40 04:48:14 Config A/D Result=40 04:48:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:14 Get A/D filter: -9.255963e+061 result=40 04:48:14 Get A/D value=-858993460 result=40 04:48:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:14 Parameters OK 04:48:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:14 Set A/D data flow result=40 04:48:14 Set A/D channel type result=40 04:48:14 Set A/D encoding result=40 04:48:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:14 Set channel filter=0.000000e+000 result=40 04:48:14 Config A/D Result=40 04:48:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:14 Get A/D filter: -9.255963e+061 result=40 04:48:14 Get A/D value=-858993460 result=40 04:48:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:14 Aux= 04:48:14 Message to Camera, serial 262884 queued 04:48:51 Received message from Master: op=PointingHead serial=262897 04:48:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:48:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:48:51 Point started: ret=0 04:48:51 point_skyscan result=0 04:48:52 Check angles 04:48:52 SkyScan query 04:48:52 SkyScan query done: ret=0 az=153.3<-10220 ze=-22.08<-13472 Statuses=0009 0009 04:48:52 Msec=0 True Az=153.3 Ze=-22.08 Az status=0009 Ze status=0009 04:48:53 Check angles 04:48:53 SkyScan query 04:48:53 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.645<-12043 Statuses=0009 0009 04:48:53 Msec=750 True Az=135.375 Ze=-0.645 Az status=0009 Ze status=0009 04:48:53 Check angles 04:48:53 SkyScan query 04:48:54 SkyScan query done: ret=0 az=117.855<-7857 ze=20.295<-10647 Statuses=0009 0009 04:48:54 Msec=1500 True Az=117.855 Ze=20.295 Az status=0009 Ze status=0009 04:48:54 Check angles 04:48:54 SkyScan query 04:48:55 SkyScan query done: ret=0 az=100.5<-6700 ze=41.28<-9248 Statuses=0009 0009 04:48:55 Msec=2250 True Az=100.5 Ze=41.28 Az status=0009 Ze status=0009 04:48:55 Check angles 04:48:55 SkyScan query 04:48:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 04:48:55 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 04:48:56 Check angles 04:48:56 SkyScan query 04:48:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:48:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:48:56 Message to Master queued w/err=0: serial=262897 error=0 04:49:01 Received message from Master: op=Filter serial=262898 04:49:01 Color wheel filter change from 0 to 0 04:49:01 FLIGetFilterPos err=0 currentPosition=0 04:49:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:01 Filter is already there-color wheel unchanged 04:49:01 Received message from Master: op=Shutter serial=262899 04:49:01 Shutter LASER close 04:49:01 Received message from Camera: op=State serial=262901 04:49:01 GetSingleValue result=40 Value=cccccccc 04:49:01 SkyScan query 04:49:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:49:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:02 Parameters OK 04:49:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:02 Set A/D data flow result=40 04:49:02 Set A/D channel type result=40 04:49:02 Set A/D encoding result=40 04:49:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:02 Set channel filter=0.000000e+000 result=40 04:49:02 Config A/D Result=40 04:49:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:02 Get A/D filter: -9.255963e+061 result=40 04:49:02 Get A/D value=-858993460 result=40 04:49:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:02 Parameters OK 04:49:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:02 Set A/D data flow result=40 04:49:02 Set A/D channel type result=40 04:49:02 Set A/D encoding result=40 04:49:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:02 Set channel filter=0.000000e+000 result=40 04:49:02 Config A/D Result=40 04:49:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:02 Get A/D filter: -9.255963e+061 result=40 04:49:02 Get A/D value=-858993460 result=40 04:49:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:02 Aux= 04:49:02 Message to Camera, serial 262901 queued 04:49:39 Received message from Master: op=PointingHead serial=262914 04:49:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:49:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:49:39 Point started: ret=0 04:49:39 point_skyscan result=0 04:49:40 Check angles 04:49:40 SkyScan query 04:49:41 SkyScan query done: ret=0 az=85.995<-5733 ze=21.885<-10541 Statuses=0008 0009 04:49:41 Msec=0 True Az=85.995 Ze=21.885 Az status=0008 Ze status=0009 04:49:41 Check angles 04:49:41 SkyScan query 04:49:41 SkyScan query done: ret=0 az=85.995<-5733 ze=0.915<-11939 Statuses=0008 0009 04:49:41 Msec=750 True Az=85.995 Ze=0.915 Az status=0008 Ze status=0009 04:49:42 Check angles 04:49:42 SkyScan query 04:49:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.025<-13335 Statuses=0008 0009 04:49:42 Msec=1500 True Az=85.995 Ze=-20.025 Az status=0008 Ze status=0009 04:49:42 Check angles 04:49:42 SkyScan query 04:49:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.37<-14758 Statuses=0008 0009 04:49:43 Msec=2250 True Az=85.995 Ze=-41.37 Az status=0008 Ze status=0009 04:49:43 Check angles 04:49:43 SkyScan query 04:49:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:49:44 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:49:44 Message to Master queued w/err=0: serial=262914 error=0 04:49:49 Received message from Master: op=Filter serial=262915 04:49:49 Color wheel filter change from 0 to 0 04:49:49 FLIGetFilterPos err=0 currentPosition=0 04:49:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:49 Filter is already there-color wheel unchanged 04:49:49 Received message from Master: op=Shutter serial=262916 04:49:49 Shutter LASER close 04:49:49 Received message from Camera: op=State serial=262918 04:49:49 GetSingleValue result=40 Value=cccccccc 04:49:49 SkyScan query 04:49:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:49:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:49 Parameters OK 04:49:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:49 Set A/D data flow result=40 04:49:49 Set A/D channel type result=40 04:49:49 Set A/D encoding result=40 04:49:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:49 Set channel filter=0.000000e+000 result=40 04:49:49 Config A/D Result=40 04:49:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:49 Get A/D filter: -9.255963e+061 result=40 04:49:49 Get A/D value=-858993460 result=40 04:49:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:49 Parameters OK 04:49:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:49 Set A/D data flow result=40 04:49:49 Set A/D channel type result=40 04:49:49 Set A/D encoding result=40 04:49:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:49 Set channel filter=0.000000e+000 result=40 04:49:49 Config A/D Result=40 04:49:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:49 Get A/D filter: -9.255963e+061 result=40 04:49:49 Get A/D value=-858993460 result=40 04:49:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:49 Aux= 04:49:49 Message to Camera, serial 262918 queued 04:50:26 Received message from Master: op=PointingHead serial=262931 04:50:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:50:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:50:27 Point started: ret=0 04:50:27 point_skyscan result=0 04:50:27 Check angles 04:50:27 SkyScan query 04:50:28 SkyScan query done: ret=0 az=109.41<-7294 ze=-81.825<-17455 Statuses=0009 0009 04:50:28 Msec=0 True Az=109.41 Ze=-81.825 Az status=0009 Ze status=0009 04:50:28 Check angles 04:50:28 SkyScan query 04:50:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 04:50:29 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 04:50:29 Check angles 04:50:29 SkyScan query 04:50:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 04:50:29 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 04:50:30 Check angles 04:50:30 SkyScan query 04:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 04:50:30 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 04:50:30 Check angles 04:50:30 SkyScan query 04:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.47<-23098 Statuses=0008 0009 04:50:31 Msec=3000 True Az=112.995 Ze=-166.47 Az status=0008 Ze status=0009 04:50:31 Check angles 04:50:31 SkyScan query 04:50:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:50:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:50:32 Message to Master queued w/err=0: serial=262931 error=0 04:50:37 Received message from Master: op=Filter serial=262932 04:50:37 Color wheel filter change from 0 to 0 04:50:37 FLIGetFilterPos err=0 currentPosition=0 04:50:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:37 Filter is already there-color wheel unchanged 04:50:37 Received message from Master: op=Shutter serial=262933 04:50:37 Shutter LASER open 04:50:37 Received message from Camera: op=State serial=262935 04:50:37 GetSingleValue result=40 Value=cccccccc 04:50:37 SkyScan query 04:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:50:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:38 Parameters OK 04:50:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:38 Set A/D data flow result=40 04:50:38 Set A/D channel type result=40 04:50:38 Set A/D encoding result=40 04:50:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:38 Set channel filter=0.000000e+000 result=40 04:50:38 Config A/D Result=40 04:50:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:38 Get A/D filter: -9.255963e+061 result=40 04:50:38 Get A/D value=-858993460 result=40 04:50:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:38 Parameters OK 04:50:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:38 Set A/D data flow result=40 04:50:38 Set A/D channel type result=40 04:50:38 Set A/D encoding result=40 04:50:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:38 Set channel filter=0.000000e+000 result=40 04:50:38 Config A/D Result=40 04:50:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:38 Get A/D filter: -9.255963e+061 result=40 04:50:38 Get A/D value=-858993460 result=40 04:50:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:38 Aux= 04:50:38 Message to Camera, serial 262935 queued 04:50:46 Received message from Master: op=Shutter serial=262945 04:50:46 Shutter LASER close 04:50:47 Received message from Master: op=PointingHead serial=262949 04:50:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:50:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:50:47 Point started: ret=0 04:50:47 point_skyscan result=0 04:50:48 Check angles 04:50:48 SkyScan query 04:50:48 SkyScan query done: ret=0 az=89.85<-5990 ze=157.23<-1518 Statuses=0009 0009 04:50:48 Msec=0 True Az=89.85 Ze=157.23 Az status=0009 Ze status=0009 04:50:48 Check angles 04:50:48 SkyScan query 04:50:49 SkyScan query done: ret=0 az=72.45<-4830 ze=136.26<-2916 Statuses=0009 0009 04:50:49 Msec=750 True Az=72.45 Ze=136.26 Az status=0009 Ze status=0009 04:50:49 Check angles 04:50:49 SkyScan query 04:50:50 SkyScan query done: ret=0 az=54.66<-3644 ze=114.855<-4343 Statuses=0009 0009 04:50:50 Msec=1500 True Az=54.66 Ze=114.855 Az status=0009 Ze status=0009 04:50:50 Check angles 04:50:50 SkyScan query 04:50:51 SkyScan query done: ret=0 az=40.98<-2732 ze=93.93<-5738 Statuses=0009 0009 04:50:51 Msec=2250 True Az=40.98 Ze=93.93 Az status=0009 Ze status=0009 04:50:51 Check angles 04:50:51 SkyScan query 04:50:51 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 04:50:51 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 04:50:52 Check angles 04:50:52 SkyScan query 04:50:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 04:50:52 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 04:50:52 Check angles 04:50:52 SkyScan query 04:50:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:50:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:50:53 Message to Master queued w/err=0: serial=262949 error=0 04:50:58 Received message from Master: op=Filter serial=262950 04:50:58 Color wheel filter change from 0 to 0 04:50:58 FLIGetFilterPos err=0 currentPosition=0 04:50:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:58 Filter is already there-color wheel unchanged 04:50:58 Received message from Master: op=Shutter serial=262951 04:50:58 Shutter LASER close 04:50:58 Received message from Camera: op=State serial=262953 04:50:58 GetSingleValue result=40 Value=cccccccc 04:50:58 SkyScan query 04:50:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:50:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:59 Parameters OK 04:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:59 Set A/D data flow result=40 04:50:59 Set A/D channel type result=40 04:50:59 Set A/D encoding result=40 04:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:59 Set channel filter=0.000000e+000 result=40 04:50:59 Config A/D Result=40 04:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:59 Get A/D filter: -9.255963e+061 result=40 04:50:59 Get A/D value=-858993460 result=40 04:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:59 Parameters OK 04:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:59 Set A/D data flow result=40 04:50:59 Set A/D channel type result=40 04:50:59 Set A/D encoding result=40 04:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:59 Set channel filter=0.000000e+000 result=40 04:50:59 Config A/D Result=40 04:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:59 Get A/D filter: -9.255963e+061 result=40 04:50:59 Get A/D value=-858993460 result=40 04:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:59 Aux= 04:50:59 Message to Camera, serial 262953 queued 04:51:36 Received message from Master: op=PointingHead serial=262966 04:51:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:51:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:51:36 Point started: ret=0 04:51:36 point_skyscan result=0 04:51:37 Check angles 04:51:37 SkyScan query 04:51:37 SkyScan query done: ret=0 az=40.995<-2733 ze=21.825<-10545 Statuses=0008 0009 04:51:37 Msec=0 True Az=40.995 Ze=21.825 Az status=0008 Ze status=0009 04:51:38 Check angles 04:51:38 SkyScan query 04:51:38 SkyScan query done: ret=0 az=40.98<-2732 ze=0.885<-11941 Statuses=0008 0009 04:51:38 Msec=750 True Az=40.98 Ze=0.885 Az status=0008 Ze status=0009 04:51:38 Check angles 04:51:38 SkyScan query 04:51:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.055<-13337 Statuses=0008 0009 04:51:39 Msec=1500 True Az=40.995 Ze=-20.055 Az status=0008 Ze status=0009 04:51:39 Check angles 04:51:39 SkyScan query 04:51:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 04:51:40 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 04:51:40 Check angles 04:51:40 SkyScan query 04:51:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:51:40 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:51:40 Message to Master queued w/err=0: serial=262966 error=0 04:51:45 Received message from Master: op=Filter serial=262967 04:51:45 Color wheel filter change from 0 to 0 04:51:45 FLIGetFilterPos err=0 currentPosition=0 04:51:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:45 Filter is already there-color wheel unchanged 04:51:46 Received message from Master: op=Shutter serial=262968 04:51:46 Shutter LASER close 04:51:46 Received message from Camera: op=State serial=262970 04:51:46 GetSingleValue result=40 Value=cccccccc 04:51:46 SkyScan query 04:51:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:51:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:46 Parameters OK 04:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:46 Set A/D data flow result=40 04:51:46 Set A/D channel type result=40 04:51:46 Set A/D encoding result=40 04:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:46 Set channel filter=0.000000e+000 result=40 04:51:46 Config A/D Result=40 04:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:46 Get A/D filter: -9.255963e+061 result=40 04:51:46 Get A/D value=-858993460 result=40 04:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:46 Parameters OK 04:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:46 Set A/D data flow result=40 04:51:46 Set A/D channel type result=40 04:51:46 Set A/D encoding result=40 04:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:46 Set channel filter=0.000000e+000 result=40 04:51:46 Config A/D Result=40 04:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:46 Get A/D filter: -9.255963e+061 result=40 04:51:46 Get A/D value=-858993460 result=40 04:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:46 Aux= 04:51:46 Message to Camera, serial 262970 queued 04:52:23 Received message from Master: op=PointingHead serial=262983 04:52:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:52:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:52:23 Point started: ret=0 04:52:23 point_skyscan result=0 04:52:24 Check angles 04:52:24 SkyScan query 04:52:25 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.58<-16572 Statuses=0009 0009 04:52:25 Msec=0 True Az=64.245 Ze=-68.58 Az status=0009 Ze status=0009 04:52:25 Check angles 04:52:25 SkyScan query 04:52:25 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.58<-17972 Statuses=0009 0009 04:52:25 Msec=750 True Az=81.585 Ze=-89.58 Az status=0009 Ze status=0009 04:52:26 Check angles 04:52:26 SkyScan query 04:52:26 SkyScan query done: ret=0 az=99.645<-6643 ze=-110.97<-19398 Statuses=0009 0009 04:52:26 Msec=1500 True Az=99.645 Ze=-110.97 Az status=0009 Ze status=0009 04:52:26 Check angles 04:52:26 SkyScan query 04:52:27 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.895<-20793 Statuses=0009 0009 04:52:27 Msec=2250 True Az=117.045 Ze=-131.895 Az status=0009 Ze status=0009 04:52:27 Check angles 04:52:27 SkyScan query 04:52:28 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 04:52:28 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 04:52:28 Check angles 04:52:28 SkyScan query 04:52:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 04:52:28 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 04:52:28 Message to Master queued w/err=0: serial=262983 error=0 04:52:33 Received message from Master: op=Filter serial=262984 04:52:33 Color wheel filter change from 0 to 0 04:52:33 FLIGetFilterPos err=0 currentPosition=0 04:52:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:33 Filter is already there-color wheel unchanged 04:52:34 Received message from Master: op=Shutter serial=262985 04:52:34 Shutter LASER close 04:52:34 Received message from Camera: op=State serial=262987 04:52:34 GetSingleValue result=40 Value=cccccccc 04:52:34 SkyScan query 04:52:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:52:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:34 Parameters OK 04:52:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:34 Set A/D data flow result=40 04:52:34 Set A/D channel type result=40 04:52:34 Set A/D encoding result=40 04:52:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:34 Set channel filter=0.000000e+000 result=40 04:52:34 Config A/D Result=40 04:52:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:34 Get A/D filter: -9.255963e+061 result=40 04:52:34 Get A/D value=-858993460 result=40 04:52:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:34 Parameters OK 04:52:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:34 Set A/D data flow result=40 04:52:34 Set A/D channel type result=40 04:52:34 Set A/D encoding result=40 04:52:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:34 Set channel filter=0.000000e+000 result=40 04:52:34 Config A/D Result=40 04:52:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:34 Get A/D filter: -9.255963e+061 result=40 04:52:34 Get A/D value=-858993460 result=40 04:52:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:34 Aux= 04:52:34 Message to Camera, serial 262987 queued 04:53:10 Received message from Master: op=PointingHead serial=262999 04:53:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:53:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:53:11 Point started: ret=0 04:53:11 point_skyscan result=0 04:53:11 Check angles 04:53:11 SkyScan query 04:53:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.45<-23430 Statuses=0009 0009 04:53:12 Msec=0 True Az=113.01 Ze=-171.45 Az status=0009 Ze status=0009 04:53:12 Check angles 04:53:12 SkyScan query 04:53:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:53:13 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:53:13 Message to Master queued w/err=0: serial=262999 error=0 04:53:18 Received message from Master: op=Filter serial=263000 04:53:18 Color wheel filter change from 0 to 0 04:53:18 FLIGetFilterPos err=0 currentPosition=0 04:53:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:18 Filter is already there-color wheel unchanged 04:53:18 Received message from Master: op=Shutter serial=263001 04:53:18 Shutter LASER open 04:53:18 Received message from Camera: op=State serial=263003 04:53:18 GetSingleValue result=40 Value=cccccccc 04:53:18 SkyScan query 04:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:53:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:19 Parameters OK 04:53:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:19 Set A/D data flow result=40 04:53:19 Set A/D channel type result=40 04:53:19 Set A/D encoding result=40 04:53:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:19 Set channel filter=0.000000e+000 result=40 04:53:19 Config A/D Result=40 04:53:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:19 Get A/D filter: -9.255963e+061 result=40 04:53:19 Get A/D value=-858993460 result=40 04:53:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:19 Parameters OK 04:53:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:19 Set A/D data flow result=40 04:53:19 Set A/D channel type result=40 04:53:19 Set A/D encoding result=40 04:53:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:19 Set channel filter=0.000000e+000 result=40 04:53:19 Config A/D Result=40 04:53:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:19 Get A/D filter: -9.255963e+061 result=40 04:53:19 Get A/D value=-858993460 result=40 04:53:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:19 Aux= 04:53:19 Message to Camera, serial 263003 queued 04:53:27 Received message from Master: op=Shutter serial=263013 04:53:27 Shutter LASER close 04:53:28 Received message from Master: op=PointingHead serial=263017 04:53:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:53:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:53:28 Point started: ret=0 04:53:28 point_skyscan result=0 04:53:29 Check angles 04:53:29 SkyScan query 04:53:29 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.22<-21548 Statuses=0009 0009 04:53:29 Msec=0 True Az=136.095 Ze=-143.22 Az status=0009 Ze status=0009 04:53:29 Check angles 04:53:29 SkyScan query 04:53:30 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.22<-20148 Statuses=0009 0009 04:53:30 Msec=750 True Az=153.48 Ze=-122.22 Az status=0009 Ze status=0009 04:53:30 Check angles 04:53:30 SkyScan query 04:53:31 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.34<-18756 Statuses=0009 0009 04:53:31 Msec=1500 True Az=170.985 Ze=-101.34 Az status=0009 Ze status=0009 04:53:31 Check angles 04:53:31 SkyScan query 04:53:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.95<-17330 Statuses=0008 0009 04:53:32 Msec=2250 True Az=176.01 Ze=-79.95 Az status=0008 Ze status=0009 04:53:32 Check angles 04:53:32 SkyScan query 04:53:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.95<-15930 Statuses=0008 0009 04:53:32 Msec=3000 True Az=176.01 Ze=-58.95 Az status=0008 Ze status=0009 04:53:32 Check angles 04:53:32 SkyScan query 04:53:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:53:33 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:53:33 Message to Master queued w/err=0: serial=263017 error=0 04:53:38 Received message from Master: op=Filter serial=263018 04:53:38 Color wheel filter change from 0 to 0 04:53:38 FLIGetFilterPos err=0 currentPosition=0 04:53:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:38 Filter is already there-color wheel unchanged 04:53:38 Received message from Master: op=Shutter serial=263019 04:53:38 Shutter LASER close 04:53:38 Received message from Camera: op=State serial=263021 04:53:38 GetSingleValue result=40 Value=cccccccc 04:53:38 SkyScan query 04:53:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:53:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:39 Parameters OK 04:53:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:39 Set A/D data flow result=40 04:53:39 Set A/D channel type result=40 04:53:39 Set A/D encoding result=40 04:53:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:39 Set channel filter=0.000000e+000 result=40 04:53:39 Config A/D Result=40 04:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:39 Get A/D filter: -9.255963e+061 result=40 04:53:39 Get A/D value=-858993460 result=40 04:53:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:39 Parameters OK 04:53:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:39 Set A/D data flow result=40 04:53:39 Set A/D channel type result=40 04:53:39 Set A/D encoding result=40 04:53:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:39 Set channel filter=0.000000e+000 result=40 04:53:39 Config A/D Result=40 04:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:39 Get A/D filter: -9.255963e+061 result=40 04:53:39 Get A/D value=-858993460 result=40 04:53:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:39 Aux= 04:53:39 Message to Camera, serial 263021 queued 04:54:16 Received message from Master: op=PointingHead serial=263034 04:54:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:54:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:54:16 Point started: ret=0 04:54:16 point_skyscan result=0 04:54:17 Check angles 04:54:17 SkyScan query 04:54:17 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.05<-13470 Statuses=0009 0009 04:54:17 Msec=0 True Az=153.225 Ze=-22.05 Az status=0009 Ze status=0009 04:54:18 Check angles 04:54:18 SkyScan query 04:54:18 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.05<-12070 Statuses=0009 0009 04:54:18 Msec=750 True Az=135.795 Ze=-1.05 Az status=0009 Ze status=0009 04:54:18 Check angles 04:54:18 SkyScan query 04:54:19 SkyScan query done: ret=0 az=118.29<-7886 ze=19.86<-10676 Statuses=0009 0009 04:54:19 Msec=1500 True Az=118.29 Ze=19.86 Az status=0009 Ze status=0009 04:54:19 Check angles 04:54:19 SkyScan query 04:54:20 SkyScan query done: ret=0 az=100.515<-6701 ze=41.265<-9249 Statuses=0009 0009 04:54:20 Msec=2250 True Az=100.515 Ze=41.265 Az status=0009 Ze status=0009 04:54:20 Check angles 04:54:20 SkyScan query 04:54:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 04:54:20 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 04:54:21 Check angles 04:54:21 SkyScan query 04:54:21 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 04:54:21 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 04:54:21 Message to Master queued w/err=0: serial=263034 error=0 04:54:26 Received message from Master: op=Filter serial=263035 04:54:26 Color wheel filter change from 0 to 0 04:54:26 FLIGetFilterPos err=0 currentPosition=0 04:54:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:26 Filter is already there-color wheel unchanged 04:54:26 Received message from Master: op=Shutter serial=263036 04:54:26 Shutter LASER close 04:54:26 Received message from Camera: op=State serial=263038 04:54:26 GetSingleValue result=40 Value=cccccccc 04:54:26 SkyScan query 04:54:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:54:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:27 Parameters OK 04:54:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:27 Set A/D data flow result=40 04:54:27 Set A/D channel type result=40 04:54:27 Set A/D encoding result=40 04:54:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:27 Set channel filter=0.000000e+000 result=40 04:54:27 Config A/D Result=40 04:54:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:27 Get A/D filter: -9.255963e+061 result=40 04:54:27 Get A/D value=-858993460 result=40 04:54:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:27 Parameters OK 04:54:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:27 Set A/D data flow result=40 04:54:27 Set A/D channel type result=40 04:54:27 Set A/D encoding result=40 04:54:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:27 Set channel filter=0.000000e+000 result=40 04:54:27 Config A/D Result=40 04:54:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:27 Get A/D filter: -9.255963e+061 result=40 04:54:27 Get A/D value=-858993460 result=40 04:54:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:27 Aux= 04:54:27 Message to Camera, serial 263038 queued 04:55:04 Received message from Master: op=PointingHead serial=263051 04:55:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:55:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:55:04 Point started: ret=0 04:55:04 point_skyscan result=0 04:55:05 Check angles 04:55:05 SkyScan query 04:55:06 SkyScan query done: ret=0 az=85.995<-5733 ze=21.285<-10581 Statuses=0008 0009 04:55:06 Msec=0 True Az=85.995 Ze=21.285 Az status=0008 Ze status=0009 04:55:06 Check angles 04:55:06 SkyScan query 04:55:06 SkyScan query done: ret=0 az=85.995<-5733 ze=0.36<-11976 Statuses=0008 0009 04:55:06 Msec=750 True Az=85.995 Ze=0.36 Az status=0008 Ze status=0009 04:55:07 Check angles 04:55:07 SkyScan query 04:55:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.61<-13374 Statuses=0008 0009 04:55:07 Msec=1500 True Az=85.995 Ze=-20.61 Az status=0008 Ze status=0009 04:55:07 Check angles 04:55:07 SkyScan query 04:55:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.985<-14799 Statuses=0008 0009 04:55:08 Msec=2250 True Az=85.995 Ze=-41.985 Az status=0008 Ze status=0009 04:55:08 Check angles 04:55:08 SkyScan query 04:55:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:55:09 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:55:09 Message to Master queued w/err=0: serial=263051 error=0 04:55:14 Received message from Master: op=Filter serial=263052 04:55:14 Color wheel filter change from 0 to 0 04:55:14 FLIGetFilterPos err=0 currentPosition=0 04:55:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:14 Filter is already there-color wheel unchanged 04:55:14 Received message from Master: op=Shutter serial=263053 04:55:14 Shutter LASER close 04:55:14 Received message from Camera: op=State serial=263055 04:55:14 GetSingleValue result=40 Value=cccccccc 04:55:14 SkyScan query 04:55:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:55:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:15 Parameters OK 04:55:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:15 Set A/D data flow result=40 04:55:15 Set A/D channel type result=40 04:55:15 Set A/D encoding result=40 04:55:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:15 Set channel filter=0.000000e+000 result=40 04:55:15 Config A/D Result=40 04:55:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:15 Get A/D filter: -9.255963e+061 result=40 04:55:15 Get A/D value=-858993460 result=40 04:55:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:15 Parameters OK 04:55:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:15 Set A/D data flow result=40 04:55:15 Set A/D channel type result=40 04:55:15 Set A/D encoding result=40 04:55:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:15 Set channel filter=0.000000e+000 result=40 04:55:15 Config A/D Result=40 04:55:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:15 Get A/D filter: -9.255963e+061 result=40 04:55:15 Get A/D value=-858993460 result=40 04:55:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:15 Aux= 04:55:15 Message to Camera, serial 263055 queued 04:55:51 Received message from Master: op=PointingHead serial=263068 04:55:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:55:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:55:52 Point started: ret=0 [UTC 2018-12-19 04:55:52] 04:55:52 point_skyscan result=0 [UTC 2018-12-19 04:55:52] 04:55:53 Check angles 04:55:53 SkyScan query 04:55:53 SkyScan query done: ret=0 az=110.805<-7387 ze=-83.49<-17566 Statuses=0009 0009 04:55:53 Msec=0 True Az=110.805 Ze=-83.49 Az status=0009 Ze status=0009 04:55:53 Check angles 04:55:53 SkyScan query 04:55:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-104.895<-18993 Statuses=0008 0009 04:55:54 Msec=750 True Az=112.995 Ze=-104.895 Az status=0008 Ze status=0009 04:55:54 Check angles 04:55:54 SkyScan query 04:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-125.85<-20390 Statuses=0008 0009 04:55:55 Msec=1500 True Az=112.995 Ze=-125.85 Az status=0008 Ze status=0009 04:55:55 Check angles 04:55:55 SkyScan query 04:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-146.76<-21784 Statuses=0008 0009 04:55:55 Msec=2250 True Az=112.995 Ze=-146.76 Az status=0008 Ze status=0009 04:55:56 Check angles 04:55:56 SkyScan query 04:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-167.745<-23183 Statuses=0008 0009 04:55:56 Msec=3000 True Az=112.995 Ze=-167.745 Az status=0008 Ze status=0009 04:55:56 Check angles 04:55:56 SkyScan query 04:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:55:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:55:57 Message to Master queued w/err=0: serial=263068 error=0 04:56:02 Received message from Master: op=Filter serial=263069 04:56:02 Color wheel filter change from 0 to 0 04:56:02 FLIGetFilterPos err=0 currentPosition=0 04:56:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:02 Filter is already there-color wheel unchanged 04:56:02 Received message from Master: op=Shutter serial=263070 04:56:02 Shutter LASER open 04:56:02 Received message from Camera: op=State serial=263072 04:56:02 GetSingleValue result=40 Value=cccccccc 04:56:02 SkyScan query 04:56:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:56:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:03 Parameters OK 04:56:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:03 Set A/D data flow result=40 04:56:03 Set A/D channel type result=40 04:56:03 Set A/D encoding result=40 04:56:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:03 Set channel filter=0.000000e+000 result=40 04:56:03 Config A/D Result=40 04:56:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:03 Get A/D filter: -9.255963e+061 result=40 04:56:03 Get A/D value=-858993460 result=40 04:56:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:03 Parameters OK 04:56:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:03 Set A/D data flow result=40 04:56:03 Set A/D channel type result=40 04:56:03 Set A/D encoding result=40 04:56:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:03 Set channel filter=0.000000e+000 result=40 04:56:03 Config A/D Result=40 04:56:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:03 Get A/D filter: -9.255963e+061 result=40 04:56:03 Get A/D value=-858993460 result=40 04:56:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:03 Aux= 04:56:03 Message to Camera, serial 263072 queued 04:56:11 Received message from Master: op=Shutter serial=263082 04:56:11 Shutter LASER close 04:56:12 Received message from Master: op=PointingHead serial=263086 04:56:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:56:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:56:12 Point started: ret=0 04:56:12 point_skyscan result=0 04:56:13 Check angles 04:56:13 SkyScan query 04:56:13 SkyScan query done: ret=0 az=89.79<-5986 ze=157.065<-1529 Statuses=0009 0009 04:56:13 Msec=0 True Az=89.79 Ze=157.065 Az status=0009 Ze status=0009 04:56:14 Check angles 04:56:14 SkyScan query 04:56:14 SkyScan query done: ret=0 az=71.94<-4796 ze=135.675<-2955 Statuses=0009 0009 04:56:14 Msec=750 True Az=71.94 Ze=135.675 Az status=0009 Ze status=0009 04:56:14 Check angles 04:56:14 SkyScan query 04:56:15 SkyScan query done: ret=0 az=54.51<-3634 ze=114.675<-4355 Statuses=0009 0009 04:56:15 Msec=1500 True Az=54.51 Ze=114.675 Az status=0009 Ze status=0009 04:56:15 Check angles 04:56:15 SkyScan query 04:56:16 SkyScan query done: ret=0 az=40.98<-2732 ze=93.78<-5748 Statuses=0009 0009 04:56:16 Msec=2250 True Az=40.98 Ze=93.78 Az status=0009 Ze status=0009 04:56:16 Check angles 04:56:16 SkyScan query 04:56:16 SkyScan query done: ret=0 az=40.995<-2733 ze=72.795<-7147 Statuses=0008 0009 04:56:16 Msec=3000 True Az=40.995 Ze=72.795 Az status=0008 Ze status=0009 04:56:17 Check angles 04:56:17 SkyScan query 04:56:17 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 04:56:17 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 04:56:17 Check angles 04:56:17 SkyScan query 04:56:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:56:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:56:18 Message to Master queued w/err=0: serial=263086 error=0 04:56:23 Received message from Master: op=Filter serial=263087 04:56:23 Color wheel filter change from 0 to 0 04:56:23 FLIGetFilterPos err=0 currentPosition=0 04:56:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:23 Filter is already there-color wheel unchanged 04:56:23 Received message from Master: op=Shutter serial=263088 04:56:23 Shutter LASER close 04:56:23 Received message from Camera: op=State serial=263090 04:56:23 GetSingleValue result=40 Value=cccccccc 04:56:23 SkyScan query 04:56:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:56:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:24 Parameters OK 04:56:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:24 Set A/D data flow result=40 04:56:24 Set A/D channel type result=40 04:56:24 Set A/D encoding result=40 04:56:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:24 Set channel filter=0.000000e+000 result=40 04:56:24 Config A/D Result=40 04:56:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:24 Get A/D filter: -9.255963e+061 result=40 04:56:24 Get A/D value=-858993460 result=40 04:56:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:24 Parameters OK 04:56:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:24 Set A/D data flow result=40 04:56:24 Set A/D channel type result=40 04:56:24 Set A/D encoding result=40 04:56:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:24 Set channel filter=0.000000e+000 result=40 04:56:24 Config A/D Result=40 04:56:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:24 Get A/D filter: -9.255963e+061 result=40 04:56:24 Get A/D value=-858993460 result=40 04:56:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:24 Aux= 04:56:24 Message to Camera, serial 263090 queued 04:57:01 Received message from Master: op=PointingHead serial=263103 04:57:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:57:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:57:01 Point started: ret=0 04:57:01 point_skyscan result=0 04:57:02 Check angles 04:57:02 SkyScan query 04:57:03 SkyScan query done: ret=0 az=40.995<-2733 ze=21.705<-10553 Statuses=0008 0009 04:57:03 Msec=0 True Az=40.995 Ze=21.705 Az status=0008 Ze status=0009 04:57:03 Check angles 04:57:03 SkyScan query 04:57:03 SkyScan query done: ret=0 az=40.995<-2733 ze=0.735<-11951 Statuses=0008 0009 04:57:03 Msec=750 True Az=40.995 Ze=0.735 Az status=0008 Ze status=0009 04:57:03 Check angles 04:57:03 SkyScan query 04:57:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.28<-13352 Statuses=0008 0009 04:57:04 Msec=1500 True Az=40.995 Ze=-20.28 Az status=0008 Ze status=0009 04:57:04 Check angles 04:57:04 SkyScan query 04:57:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 04:57:05 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 04:57:05 Check angles 04:57:05 SkyScan query 04:57:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:57:06 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:57:06 Message to Master queued w/err=0: serial=263103 error=0 04:57:11 Received message from Master: op=Filter serial=263104 04:57:11 Color wheel filter change from 0 to 0 04:57:11 FLIGetFilterPos err=0 currentPosition=0 04:57:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:11 Filter is already there-color wheel unchanged 04:57:11 Received message from Master: op=Shutter serial=263105 04:57:11 Shutter LASER close 04:57:11 Received message from Camera: op=State serial=263107 04:57:11 GetSingleValue result=40 Value=cccccccc 04:57:11 SkyScan query 04:57:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:57:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:11 Parameters OK 04:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:11 Set A/D data flow result=40 04:57:11 Set A/D channel type result=40 04:57:11 Set A/D encoding result=40 04:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:11 Set channel filter=0.000000e+000 result=40 04:57:11 Config A/D Result=40 04:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:11 Get A/D filter: -9.255963e+061 result=40 04:57:11 Get A/D value=-858993460 result=40 04:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:11 Parameters OK 04:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:11 Set A/D data flow result=40 04:57:11 Set A/D channel type result=40 04:57:11 Set A/D encoding result=40 04:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:11 Set channel filter=0.000000e+000 result=40 04:57:11 Config A/D Result=40 04:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:11 Get A/D filter: -9.255963e+061 result=40 04:57:11 Get A/D value=-858993460 result=40 04:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:11 Aux= 04:57:11 Message to Camera, serial 263107 queued 04:57:48 Received message from Master: op=PointingHead serial=263120 04:57:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:57:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:57:49 Point started: ret=0 04:57:49 point_skyscan result=0 04:57:49 Check angles 04:57:49 SkyScan query 04:57:50 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.1<-16540 Statuses=0009 0009 04:57:50 Msec=0 True Az=63.9 Ze=-68.1 Az status=0009 Ze status=0009 04:57:50 Check angles 04:57:50 SkyScan query 04:57:51 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.07<-17938 Statuses=0009 0009 04:57:51 Msec=750 True Az=81.345 Ze=-89.07 Az status=0009 Ze status=0009 04:57:51 Check angles 04:57:51 SkyScan query 04:57:51 SkyScan query done: ret=0 az=99.27<-6618 ze=-110.475<-19365 Statuses=0009 0009 04:57:51 Msec=1500 True Az=99.27 Ze=-110.475 Az status=0009 Ze status=0009 04:57:52 Check angles 04:57:52 SkyScan query 04:57:52 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.4<-20760 Statuses=0009 0009 04:57:52 Msec=2250 True Az=116.595 Ze=-131.4 Az status=0009 Ze status=0009 04:57:52 Check angles 04:57:52 SkyScan query 04:57:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 04:57:53 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 04:57:53 Check angles 04:57:53 SkyScan query 04:57:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 04:57:54 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 04:57:54 Message to Master queued w/err=0: serial=263120 error=0 04:57:59 Received message from Master: op=Filter serial=263121 04:57:59 Color wheel filter change from 0 to 0 04:57:59 FLIGetFilterPos err=0 currentPosition=0 04:57:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:59 Filter is already there-color wheel unchanged 04:57:59 Received message from Master: op=Shutter serial=263122 04:57:59 Shutter LASER close 04:57:59 Received message from Camera: op=State serial=263124 04:57:59 GetSingleValue result=40 Value=cccccccc 04:57:59 SkyScan query 04:57:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:57:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:59 Parameters OK 04:57:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:59 Set A/D data flow result=40 04:57:59 Set A/D channel type result=40 04:57:59 Set A/D encoding result=40 04:57:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:59 Set channel filter=0.000000e+000 result=40 04:57:59 Config A/D Result=40 04:57:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:59 Get A/D filter: -9.255963e+061 result=40 04:57:59 Get A/D value=-858993460 result=40 04:57:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:59 Parameters OK 04:57:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:59 Set A/D data flow result=40 04:57:59 Set A/D channel type result=40 04:57:59 Set A/D encoding result=40 04:57:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:59 Set channel filter=0.000000e+000 result=40 04:57:59 Config A/D Result=40 04:57:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:59 Get A/D filter: -9.255963e+061 result=40 04:57:59 Get A/D value=-858993460 result=40 04:57:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:59 Aux= 04:57:59 Message to Camera, serial 263124 queued 04:58:36 Received message from Master: op=PointingHead serial=263137 04:58:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:58:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:58:37 Point started: ret=0 04:58:37 point_skyscan result=0 04:58:37 Check angles 04:58:37 SkyScan query 04:58:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0009 0009 04:58:38 Msec=0 True Az=112.995 Ze=-171.495 Az status=0009 Ze status=0009 04:58:38 Check angles 04:58:38 SkyScan query 04:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:58:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:58:39 Message to Master queued w/err=0: serial=263137 error=0 04:58:44 Received message from Master: op=Filter serial=263138 04:58:44 Color wheel filter change from 0 to 0 04:58:44 FLIGetFilterPos err=0 currentPosition=0 04:58:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:44 Filter is already there-color wheel unchanged 04:58:44 Received message from Master: op=Shutter serial=263139 04:58:44 Shutter LASER open 04:58:44 Received message from Camera: op=State serial=263141 04:58:44 GetSingleValue result=40 Value=cccccccc 04:58:44 SkyScan query 04:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:58:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:45 Parameters OK 04:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:45 Set A/D data flow result=40 04:58:45 Set A/D channel type result=40 04:58:45 Set A/D encoding result=40 04:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:45 Set channel filter=0.000000e+000 result=40 04:58:45 Config A/D Result=40 04:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:45 Get A/D filter: -9.255963e+061 result=40 04:58:45 Get A/D value=-858993460 result=40 04:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:45 Parameters OK 04:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:45 Set A/D data flow result=40 04:58:45 Set A/D channel type result=40 04:58:45 Set A/D encoding result=40 04:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:45 Set channel filter=0.000000e+000 result=40 04:58:45 Config A/D Result=40 04:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:45 Get A/D filter: -9.255963e+061 result=40 04:58:45 Get A/D value=-858993460 result=40 04:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:45 Aux= 04:58:45 Message to Camera, serial 263141 queued 04:58:53 Received message from Master: op=Shutter serial=263151 04:58:53 Shutter LASER close 04:58:54 Received message from Master: op=PointingHead serial=263155 04:58:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:58:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:58:54 Point started: ret=0 04:58:54 point_skyscan result=0 04:58:55 Check angles 04:58:55 SkyScan query 04:58:55 SkyScan query done: ret=0 az=136.32<-9088 ze=-143.055<-21537 Statuses=0009 0009 04:58:55 Msec=0 True Az=136.32 Ze=-143.055 Az status=0009 Ze status=0009 04:58:55 Check angles 04:58:55 SkyScan query 04:58:56 SkyScan query done: ret=0 az=154.125<-10275 ze=-121.695<-20113 Statuses=0009 0009 04:58:56 Msec=750 True Az=154.125 Ze=-121.695 Az status=0009 Ze status=0009 04:58:56 Check angles 04:58:56 SkyScan query 04:58:57 SkyScan query done: ret=0 az=171.615<-11441 ze=-100.635<-18709 Statuses=0009 0009 04:58:57 Msec=1500 True Az=171.615 Ze=-100.635 Az status=0009 Ze status=0009 04:58:57 Check angles 04:58:57 SkyScan query 04:58:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.785<-17319 Statuses=0008 0009 04:58:58 Msec=2250 True Az=176.01 Ze=-79.785 Az status=0008 Ze status=0009 04:58:58 Check angles 04:58:58 SkyScan query 04:58:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.77<-15918 Statuses=0008 0009 04:58:58 Msec=3000 True Az=176.01 Ze=-58.77 Az status=0008 Ze status=0009 04:58:59 Check angles 04:58:59 SkyScan query 04:58:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:58:59 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:58:59 Message to Master queued w/err=0: serial=263155 error=0 04:59:04 Received message from Master: op=Filter serial=263156 04:59:04 Color wheel filter change from 0 to 0 04:59:04 FLIGetFilterPos err=0 currentPosition=0 04:59:04 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:04 Filter is already there-color wheel unchanged 04:59:04 Received message from Master: op=Shutter serial=263157 04:59:04 Shutter LASER close 04:59:04 Received message from Camera: op=State serial=263159 04:59:04 GetSingleValue result=40 Value=cccccccc 04:59:04 SkyScan query 04:59:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:59:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:05 Parameters OK 04:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:05 Set A/D data flow result=40 04:59:05 Set A/D channel type result=40 04:59:05 Set A/D encoding result=40 04:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:05 Set channel filter=0.000000e+000 result=40 04:59:05 Config A/D Result=40 04:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:05 Get A/D filter: -9.255963e+061 result=40 04:59:05 Get A/D value=-858993460 result=40 04:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:05 Parameters OK 04:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:05 Set A/D data flow result=40 04:59:05 Set A/D channel type result=40 04:59:05 Set A/D encoding result=40 04:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:05 Set channel filter=0.000000e+000 result=40 04:59:05 Config A/D Result=40 04:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:05 Get A/D filter: -9.255963e+061 result=40 04:59:05 Get A/D value=-858993460 result=40 04:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:05 Aux= 04:59:05 Message to Camera, serial 263159 queued 04:59:41 Received message from Master: op=PointingHead serial=263171 04:59:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:59:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:59:41 Point started: ret=0 04:59:41 point_skyscan result=0 04:59:42 Check angles 04:59:42 SkyScan query 04:59:43 SkyScan query done: ret=0 az=153.15<-10210 ze=-21.975<-13465 Statuses=0009 0009 04:59:43 Msec=0 True Az=153.15 Ze=-21.975 Az status=0009 Ze status=0009 04:59:43 Check angles 04:59:43 SkyScan query 04:59:43 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.555<-12037 Statuses=0009 0009 04:59:43 Msec=750 True Az=135.3 Ze=-0.555 Az status=0009 Ze status=0009 04:59:44 Check angles 04:59:44 SkyScan query 04:59:44 SkyScan query done: ret=0 az=117.525<-7835 ze=20.91<-10606 Statuses=0009 0009 04:59:44 Msec=1500 True Az=117.525 Ze=20.91 Az status=0009 Ze status=0009 04:59:44 Check angles 04:59:44 SkyScan query 04:59:45 SkyScan query done: ret=0 az=100.095<-6673 ze=41.775<-9215 Statuses=0009 0009 04:59:45 Msec=2250 True Az=100.095 Ze=41.775 Az status=0009 Ze status=0009 04:59:45 Check angles 04:59:45 SkyScan query 04:59:46 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:59:46 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:59:46 Check angles 04:59:46 SkyScan query 04:59:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:59:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:59:46 Message to Master queued w/err=0: serial=263171 error=0 04:59:51 Received message from Master: op=Filter serial=263172 04:59:51 Color wheel filter change from 0 to 0 04:59:51 FLIGetFilterPos err=0 currentPosition=0 04:59:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:51 Filter is already there-color wheel unchanged 04:59:52 Received message from Master: op=Shutter serial=263173 04:59:52 Shutter LASER close 04:59:52 Received message from Camera: op=State serial=263175 04:59:52 GetSingleValue result=40 Value=cccccccc 04:59:52 SkyScan query 04:59:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:59:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:52 Parameters OK 04:59:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:52 Set A/D data flow result=40 04:59:52 Set A/D channel type result=40 04:59:52 Set A/D encoding result=40 04:59:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:52 Set channel filter=0.000000e+000 result=40 04:59:52 Config A/D Result=40 04:59:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:52 Get A/D filter: -9.255963e+061 result=40 04:59:52 Get A/D value=-858993460 result=40 04:59:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:52 Parameters OK 04:59:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:52 Set A/D data flow result=40 04:59:52 Set A/D channel type result=40 04:59:52 Set A/D encoding result=40 04:59:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:52 Set channel filter=0.000000e+000 result=40 04:59:52 Config A/D Result=40 04:59:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:52 Get A/D filter: -9.255963e+061 result=40 04:59:52 Get A/D value=-858993460 result=40 04:59:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:52 Aux= 04:59:52 Message to Camera, serial 263175 queued 05:00:29 Received message from Master: op=PointingHead serial=263188 05:00:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:00:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:00:29 Point started: ret=0 05:00:29 point_skyscan result=0 05:00:30 Check angles 05:00:30 SkyScan query 05:00:31 SkyScan query done: ret=0 az=85.995<-5733 ze=21.705<-10553 Statuses=0008 0009 05:00:31 Msec=0 True Az=85.995 Ze=21.705 Az status=0008 Ze status=0009 05:00:31 Check angles 05:00:31 SkyScan query 05:00:32 SkyScan query done: ret=0 az=85.995<-5733 ze=0.765<-11949 Statuses=0008 0009 05:00:32 Msec=750 True Az=85.995 Ze=0.765 Az status=0008 Ze status=0009 05:00:32 Check angles 05:00:32 SkyScan query 05:00:32 SkyScan query done: ret=0 az=85.98<-5732 ze=-20.655<-13377 Statuses=0008 0009 05:00:32 Msec=1500 True Az=85.98 Ze=-20.655 Az status=0008 Ze status=0009 05:00:32 Check angles 05:00:32 SkyScan query 05:00:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.55<-14770 Statuses=0008 0009 05:00:33 Msec=2250 True Az=85.995 Ze=-41.55 Az status=0008 Ze status=0009 05:00:33 Check angles 05:00:33 SkyScan query 05:00:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:00:34 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:00:34 Message to Master queued w/err=0: serial=263188 error=0 05:00:39 Received message from Master: op=Filter serial=263189 05:00:39 Color wheel filter change from 0 to 0 05:00:39 FLIGetFilterPos err=0 currentPosition=0 05:00:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:39 Filter is already there-color wheel unchanged 05:00:39 Received message from Master: op=Shutter serial=263190 05:00:39 Shutter LASER close 05:00:39 Received message from Camera: op=State serial=263192 05:00:39 GetSingleValue result=40 Value=cccccccc 05:00:39 SkyScan query 05:00:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:00:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:40 Parameters OK 05:00:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:40 Set A/D data flow result=40 05:00:40 Set A/D channel type result=40 05:00:40 Set A/D encoding result=40 05:00:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:40 Set channel filter=0.000000e+000 result=40 05:00:40 Config A/D Result=40 05:00:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:40 Get A/D filter: -9.255963e+061 result=40 05:00:40 Get A/D value=-858993460 result=40 05:00:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:40 Parameters OK 05:00:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:40 Set A/D data flow result=40 05:00:40 Set A/D channel type result=40 05:00:40 Set A/D encoding result=40 05:00:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:40 Set channel filter=0.000000e+000 result=40 05:00:40 Config A/D Result=40 05:00:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:40 Get A/D filter: -9.255963e+061 result=40 05:00:40 Get A/D value=-858993460 result=40 05:00:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:40 Aux= 05:00:40 Message to Camera, serial 263192 queued 05:01:16 Received message from Master: op=PointingHead serial=263205 05:01:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:01:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:01:17 Point started: ret=0 05:01:17 point_skyscan result=0 05:01:18 Check angles 05:01:18 SkyScan query 05:01:18 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.135<-17409 Statuses=0009 0009 05:01:18 Msec=0 True Az=108.9 Ze=-81.135 Az status=0009 Ze status=0009 05:01:18 Check angles 05:01:18 SkyScan query 05:01:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 05:01:19 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 05:01:19 Check angles 05:01:19 SkyScan query 05:01:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 05:01:20 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 05:01:20 Check angles 05:01:20 SkyScan query 05:01:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.45<-21630 Statuses=0008 0009 05:01:20 Msec=2250 True Az=112.995 Ze=-144.45 Az status=0008 Ze status=0009 05:01:21 Check angles 05:01:21 SkyScan query 05:01:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 05:01:21 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 05:01:21 Check angles 05:01:21 SkyScan query 05:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:01:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:01:22 Message to Master queued w/err=0: serial=263205 error=0 05:01:27 Received message from Master: op=Filter serial=263206 05:01:27 Color wheel filter change from 0 to 0 05:01:27 FLIGetFilterPos err=0 currentPosition=0 05:01:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:27 Filter is already there-color wheel unchanged 05:01:27 Received message from Master: op=Shutter serial=263207 05:01:27 Shutter LASER open 05:01:27 Received message from Camera: op=State serial=263209 05:01:27 GetSingleValue result=40 Value=cccccccc 05:01:27 SkyScan query 05:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:01:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:28 Parameters OK 05:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:28 Set A/D data flow result=40 05:01:28 Set A/D channel type result=40 05:01:28 Set A/D encoding result=40 05:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:28 Set channel filter=0.000000e+000 result=40 05:01:28 Config A/D Result=40 05:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:28 Get A/D filter: -9.255963e+061 result=40 05:01:28 Get A/D value=-858993460 result=40 05:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:28 Parameters OK 05:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:28 Set A/D data flow result=40 05:01:28 Set A/D channel type result=40 05:01:28 Set A/D encoding result=40 05:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:28 Set channel filter=0.000000e+000 result=40 05:01:28 Config A/D Result=40 05:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:28 Get A/D filter: -9.255963e+061 result=40 05:01:28 Get A/D value=-858993460 result=40 05:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:28 Aux= 05:01:28 Message to Camera, serial 263209 queued 05:01:36 Received message from Master: op=Shutter serial=263219 05:01:36 Shutter LASER close 05:01:37 Received message from Master: op=PointingHead serial=263223 05:01:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:01:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:01:37 Point started: ret=0 05:01:37 point_skyscan result=0 05:01:38 Check angles 05:01:38 SkyScan query 05:01:38 SkyScan query done: ret=0 az=89.865<-5991 ze=157.275<-1515 Statuses=0009 0009 05:01:38 Msec=0 True Az=89.865 Ze=157.275 Az status=0009 Ze status=0009 05:01:39 Check angles 05:01:39 SkyScan query 05:01:39 SkyScan query done: ret=0 az=72.315<-4821 ze=136.305<-2913 Statuses=0009 0009 05:01:39 Msec=750 True Az=72.315 Ze=136.305 Az status=0009 Ze status=0009 05:01:39 Check angles 05:01:39 SkyScan query 05:01:40 SkyScan query done: ret=0 az=54.825<-3655 ze=115.38<-4308 Statuses=0009 0009 05:01:40 Msec=1500 True Az=54.825 Ze=115.38 Az status=0009 Ze status=0009 05:01:40 Check angles 05:01:40 SkyScan query 05:01:41 SkyScan query done: ret=0 az=40.98<-2732 ze=94.38<-5708 Statuses=0009 0009 05:01:41 Msec=2250 True Az=40.98 Ze=94.38 Az status=0009 Ze status=0009 05:01:41 Check angles 05:01:41 SkyScan query 05:01:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 05:01:41 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 05:01:42 Check angles 05:01:42 SkyScan query 05:01:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.86<-8476 Statuses=0008 0009 05:01:42 Msec=3750 True Az=40.995 Ze=52.86 Az status=0008 Ze status=0009 05:01:42 Check angles 05:01:42 SkyScan query 05:01:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:01:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:01:43 Message to Master queued w/err=0: serial=263223 error=0 05:01:48 Received message from Master: op=Filter serial=263224 05:01:48 Color wheel filter change from 0 to 0 05:01:48 FLIGetFilterPos err=0 currentPosition=0 05:01:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:48 Filter is already there-color wheel unchanged 05:01:48 Received message from Master: op=Shutter serial=263225 05:01:48 Shutter LASER close 05:01:48 Received message from Camera: op=State serial=263227 05:01:48 GetSingleValue result=40 Value=cccccccc 05:01:48 SkyScan query 05:01:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:01:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:49 Parameters OK 05:01:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:49 Set A/D data flow result=40 05:01:49 Set A/D channel type result=40 05:01:49 Set A/D encoding result=40 05:01:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:49 Set channel filter=0.000000e+000 result=40 05:01:49 Config A/D Result=40 05:01:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:49 Get A/D filter: -9.255963e+061 result=40 05:01:49 Get A/D value=-858993460 result=40 05:01:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:49 Parameters OK 05:01:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:49 Set A/D data flow result=40 05:01:49 Set A/D channel type result=40 05:01:49 Set A/D encoding result=40 05:01:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:49 Set channel filter=0.000000e+000 result=40 05:01:49 Config A/D Result=40 05:01:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:49 Get A/D filter: -9.255963e+061 result=40 05:01:49 Get A/D value=-858993460 result=40 05:01:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:49 Aux= 05:01:49 Message to Camera, serial 263227 queued 05:02:26 Received message from Master: op=PointingHead serial=263240 05:02:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:02:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:02:26 Point started: ret=0 05:02:26 point_skyscan result=0 05:02:27 Check angles 05:02:27 SkyScan query 05:02:27 SkyScan query done: ret=0 az=40.995<-2733 ze=21.87<-10542 Statuses=0008 0009 05:02:27 Msec=0 True Az=40.995 Ze=21.87 Az status=0008 Ze status=0009 05:02:28 Check angles 05:02:28 SkyScan query 05:02:28 SkyScan query done: ret=0 az=40.995<-2733 ze=0.9<-11940 Statuses=0008 0009 05:02:28 Msec=750 True Az=40.995 Ze=0.9 Az status=0008 Ze status=0009 05:02:28 Check angles 05:02:28 SkyScan query 05:02:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.04<-13336 Statuses=0008 0009 05:02:29 Msec=1500 True Az=40.995 Ze=-20.04 Az status=0008 Ze status=0009 05:02:29 Check angles 05:02:29 SkyScan query 05:02:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 05:02:30 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 05:02:30 Check angles 05:02:30 SkyScan query 05:02:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:02:30 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:02:30 Message to Master queued w/err=0: serial=263240 error=0 05:02:35 Received message from Master: op=Filter serial=263241 05:02:35 Color wheel filter change from 0 to 0 05:02:35 FLIGetFilterPos err=0 currentPosition=0 05:02:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:35 Filter is already there-color wheel unchanged 05:02:36 Received message from Master: op=Shutter serial=263242 05:02:36 Shutter LASER close 05:02:36 Received message from Camera: op=State serial=263244 05:02:36 GetSingleValue result=40 Value=cccccccc 05:02:36 SkyScan query 05:02:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:02:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:36 Parameters OK 05:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:36 Set A/D data flow result=40 05:02:36 Set A/D channel type result=40 05:02:36 Set A/D encoding result=40 05:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:36 Set channel filter=0.000000e+000 result=40 05:02:36 Config A/D Result=40 05:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:36 Get A/D filter: -9.255963e+061 result=40 05:02:36 Get A/D value=-858993460 result=40 05:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:36 Parameters OK 05:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:36 Set A/D data flow result=40 05:02:36 Set A/D channel type result=40 05:02:36 Set A/D encoding result=40 05:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:36 Set channel filter=0.000000e+000 result=40 05:02:36 Config A/D Result=40 05:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:36 Get A/D filter: -9.255963e+061 result=40 05:02:36 Get A/D value=-858993460 result=40 05:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:36 Aux= 05:02:36 Message to Camera, serial 263244 queued 05:03:13 Received message from Master: op=PointingHead serial=263257 05:03:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:03:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:03:13 Point started: ret=0 05:03:13 point_skyscan result=0 05:03:14 Check angles 05:03:14 SkyScan query 05:03:15 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.715<-16581 Statuses=0009 0009 05:03:15 Msec=0 True Az=64.41 Ze=-68.715 Az status=0009 Ze status=0009 05:03:15 Check angles 05:03:15 SkyScan query 05:03:15 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.715<-17981 Statuses=0009 0009 05:03:15 Msec=750 True Az=81.81 Ze=-89.715 Az status=0009 Ze status=0009 05:03:16 Check angles 05:03:16 SkyScan query 05:03:16 SkyScan query done: ret=0 az=99.735<-6649 ze=-111.075<-19405 Statuses=0009 0009 05:03:16 Msec=1500 True Az=99.735 Ze=-111.075 Az status=0009 Ze status=0009 05:03:16 Check angles 05:03:16 SkyScan query 05:03:17 SkyScan query done: ret=0 az=117.135<-7809 ze=-132<-20800 Statuses=0009 0009 05:03:17 Msec=2250 True Az=117.135 Ze=-132 Az status=0009 Ze status=0009 05:03:17 Check angles 05:03:17 SkyScan query 05:03:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 05:03:18 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 05:03:18 Check angles 05:03:18 SkyScan query 05:03:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 05:03:18 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 05:03:18 Message to Master queued w/err=0: serial=263257 error=0 05:03:23 Received message from Master: op=Filter serial=263258 05:03:23 Color wheel filter change from 0 to 0 05:03:23 FLIGetFilterPos err=0 currentPosition=0 05:03:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:23 Filter is already there-color wheel unchanged 05:03:24 Received message from Master: op=Shutter serial=263259 05:03:24 Shutter LASER close 05:03:24 Received message from Camera: op=State serial=263261 05:03:24 GetSingleValue result=40 Value=cccccccc 05:03:24 SkyScan query 05:03:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:03:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:24 Parameters OK 05:03:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:24 Set A/D data flow result=40 05:03:24 Set A/D channel type result=40 05:03:24 Set A/D encoding result=40 05:03:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:24 Set channel filter=0.000000e+000 result=40 05:03:24 Config A/D Result=40 05:03:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:24 Get A/D filter: -9.255963e+061 result=40 05:03:24 Get A/D value=-858993460 result=40 05:03:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:24 Parameters OK 05:03:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:24 Set A/D data flow result=40 05:03:24 Set A/D channel type result=40 05:03:24 Set A/D encoding result=40 05:03:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:24 Set channel filter=0.000000e+000 result=40 05:03:24 Config A/D Result=40 05:03:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:24 Get A/D filter: -9.255963e+061 result=40 05:03:24 Get A/D value=-858993460 result=40 05:03:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:24 Aux= 05:03:24 Message to Camera, serial 263261 queued 05:04:01 Received message from Master: op=PointingHead serial=263274 05:04:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:04:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:04:01 Point started: ret=0 05:04:01 point_skyscan result=0 05:04:02 Check angles 05:04:02 SkyScan query 05:04:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 05:04:03 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 05:04:03 Check angles 05:04:03 SkyScan query 05:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:04:04 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:04:04 Message to Master queued w/err=0: serial=263274 error=0 05:04:09 Received message from Master: op=Filter serial=263275 05:04:09 Color wheel filter change from 0 to 0 05:04:09 FLIGetFilterPos err=0 currentPosition=0 05:04:09 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:09 Filter is already there-color wheel unchanged 05:04:09 Received message from Master: op=Shutter serial=263276 05:04:09 Shutter LASER open 05:04:09 Received message from Camera: op=State serial=263278 05:04:09 GetSingleValue result=40 Value=cccccccc 05:04:09 SkyScan query 05:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:04:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:10 Parameters OK 05:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:10 Set A/D data flow result=40 05:04:10 Set A/D channel type result=40 05:04:10 Set A/D encoding result=40 05:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:10 Set channel filter=0.000000e+000 result=40 05:04:10 Config A/D Result=40 05:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:10 Get A/D filter: -9.255963e+061 result=40 05:04:10 Get A/D value=-858993460 result=40 05:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:10 Parameters OK 05:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:10 Set A/D data flow result=40 05:04:10 Set A/D channel type result=40 05:04:10 Set A/D encoding result=40 05:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:10 Set channel filter=0.000000e+000 result=40 05:04:10 Config A/D Result=40 05:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:10 Get A/D filter: -9.255963e+061 result=40 05:04:10 Get A/D value=-858993460 result=40 05:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:10 Aux= 05:04:10 Message to Camera, serial 263278 queued 05:04:18 Received message from Master: op=Shutter serial=263288 05:04:18 Shutter LASER close 05:04:19 Received message from Master: op=PointingHead serial=263292 05:04:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:04:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:04:19 Point started: ret=0 05:04:19 point_skyscan result=0 05:04:20 Check angles 05:04:20 SkyScan query 05:04:20 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.37<-21558 Statuses=0009 0009 05:04:20 Msec=0 True Az=135.975 Ze=-143.37 Az status=0009 Ze status=0009 05:04:20 Check angles 05:04:20 SkyScan query 05:04:21 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.37<-20158 Statuses=0009 0009 05:04:21 Msec=750 True Az=153.45 Ze=-122.37 Az status=0009 Ze status=0009 05:04:21 Check angles 05:04:21 SkyScan query 05:04:22 SkyScan query done: ret=0 az=170.925<-11395 ze=-101.505<-18767 Statuses=0009 0009 05:04:22 Msec=1500 True Az=170.925 Ze=-101.505 Az status=0009 Ze status=0009 05:04:22 Check angles 05:04:22 SkyScan query 05:04:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.49<-17366 Statuses=0008 0009 05:04:23 Msec=2250 True Az=176.01 Ze=-80.49 Az status=0008 Ze status=0009 05:04:23 Check angles 05:04:23 SkyScan query 05:04:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.55<-15970 Statuses=0008 0009 05:04:23 Msec=3000 True Az=175.995 Ze=-59.55 Az status=0008 Ze status=0009 05:04:23 Check angles 05:04:23 SkyScan query 05:04:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:04:24 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:04:24 Message to Master queued w/err=0: serial=263292 error=0 05:04:29 Received message from Master: op=Filter serial=263293 05:04:29 Color wheel filter change from 0 to 0 05:04:29 FLIGetFilterPos err=0 currentPosition=0 05:04:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:29 Filter is already there-color wheel unchanged 05:04:29 Received message from Master: op=Shutter serial=263294 05:04:29 Shutter LASER close 05:04:29 Received message from Camera: op=State serial=263296 05:04:29 GetSingleValue result=40 Value=cccccccc 05:04:29 SkyScan query 05:04:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:04:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:30 Parameters OK 05:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:30 Set A/D data flow result=40 05:04:30 Set A/D channel type result=40 05:04:30 Set A/D encoding result=40 05:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:30 Set channel filter=0.000000e+000 result=40 05:04:30 Config A/D Result=40 05:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:30 Get A/D filter: -9.255963e+061 result=40 05:04:30 Get A/D value=-858993460 result=40 05:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:30 Parameters OK 05:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:30 Set A/D data flow result=40 05:04:30 Set A/D channel type result=40 05:04:30 Set A/D encoding result=40 05:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:30 Set channel filter=0.000000e+000 result=40 05:04:30 Config A/D Result=40 05:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:30 Get A/D filter: -9.255963e+061 result=40 05:04:30 Get A/D value=-858993460 result=40 05:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:30 Aux= 05:04:30 Message to Camera, serial 263296 queued 05:05:07 Received message from Master: op=PointingHead serial=263309 05:05:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:05:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:05:07 Point started: ret=0 05:05:07 point_skyscan result=0 05:05:08 Check angles 05:05:08 SkyScan query 05:05:08 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.615<-13441 Statuses=0009 0009 05:05:08 Msec=0 True Az=152.91 Ze=-21.615 Az status=0009 Ze status=0009 05:05:09 Check angles 05:05:09 SkyScan query 05:05:09 SkyScan query done: ret=0 az=135<-9000 ze=-0.21<-12014 Statuses=0009 0009 05:05:09 Msec=750 True Az=135 Ze=-0.21 Az status=0009 Ze status=0009 05:05:09 Check angles 05:05:09 SkyScan query 05:05:10 SkyScan query done: ret=0 az=117.585<-7839 ze=20.82<-10612 Statuses=0009 0009 05:05:10 Msec=1500 True Az=117.585 Ze=20.82 Az status=0009 Ze status=0009 05:05:10 Check angles 05:05:10 SkyScan query 05:05:11 SkyScan query done: ret=0 az=99.75<-6650 ze=42.105<-9193 Statuses=0009 0009 05:05:11 Msec=2250 True Az=99.75 Ze=42.105 Az status=0009 Ze status=0009 05:05:11 Check angles 05:05:11 SkyScan query 05:05:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 05:05:11 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 05:05:12 Check angles 05:05:12 SkyScan query 05:05:12 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 05:05:12 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 05:05:12 Message to Master queued w/err=0: serial=263309 error=0 05:05:17 Received message from Master: op=Filter serial=263310 05:05:17 Color wheel filter change from 0 to 0 05:05:17 FLIGetFilterPos err=0 currentPosition=0 05:05:17 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:17 Filter is already there-color wheel unchanged 05:05:17 Received message from Master: op=Shutter serial=263311 05:05:17 Shutter LASER close 05:05:17 Received message from Camera: op=State serial=263313 [UTC 2018-12-19 05:05:17] 05:05:17 GetSingleValue result=40 Value=cccccccc 05:05:18 SkyScan query 05:05:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:05:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:18 Parameters OK 05:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:18 Set A/D data flow result=40 05:05:18 Set A/D channel type result=40 05:05:18 Set A/D encoding result=40 05:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:18 Set channel filter=0.000000e+000 result=40 05:05:18 Config A/D Result=40 05:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:18 Get A/D filter: -9.255963e+061 result=40 05:05:18 Get A/D value=-858993460 result=40 05:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:18 Parameters OK 05:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:18 Set A/D data flow result=40 05:05:18 Set A/D channel type result=40 05:05:18 Set A/D encoding result=40 05:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:18 Set channel filter=0.000000e+000 result=40 05:05:18 Config A/D Result=40 05:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:18 Get A/D filter: -9.255963e+061 result=40 05:05:18 Get A/D value=-858993460 result=40 05:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:18 Aux= 05:05:18 Message to Camera, serial 263313 queued 05:05:55 Received message from Master: op=PointingHead serial=263326 05:05:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:05:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:05:55 Point started: ret=0 05:05:55 point_skyscan result=0 05:05:56 Check angles 05:05:56 SkyScan query 05:05:57 SkyScan query done: ret=0 az=85.995<-5733 ze=21.555<-10563 Statuses=0008 0009 05:05:57 Msec=0 True Az=85.995 Ze=21.555 Az status=0008 Ze status=0009 05:05:57 Check angles 05:05:57 SkyScan query 05:05:57 SkyScan query done: ret=0 az=85.995<-5733 ze=0.645<-11957 Statuses=0008 0009 05:05:57 Msec=750 True Az=85.995 Ze=0.645 Az status=0008 Ze status=0009 05:05:58 Check angles 05:05:58 SkyScan query 05:05:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.355<-13357 Statuses=0008 0009 05:05:58 Msec=1500 True Az=85.995 Ze=-20.355 Az status=0008 Ze status=0009 05:05:58 Check angles 05:05:58 SkyScan query 05:05:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.25<-14750 Statuses=0008 0009 05:05:59 Msec=2250 True Az=85.995 Ze=-41.25 Az status=0008 Ze status=0009 05:05:59 Check angles 05:05:59 SkyScan query 05:06:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:06:00 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:06:00 Message to Master queued w/err=0: serial=263326 error=0 05:06:05 Received message from Master: op=Filter serial=263327 05:06:05 Color wheel filter change from 0 to 0 05:06:05 FLIGetFilterPos err=0 currentPosition=0 05:06:05 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:05 Filter is already there-color wheel unchanged 05:06:05 Received message from Master: op=Shutter serial=263328 05:06:05 Shutter LASER close 05:06:05 Received message from Camera: op=State serial=263330 05:06:05 GetSingleValue result=40 Value=cccccccc 05:06:05 SkyScan query 05:06:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:06:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:05 Parameters OK 05:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:05 Set A/D data flow result=40 05:06:05 Set A/D channel type result=40 05:06:05 Set A/D encoding result=40 05:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:05 Set channel filter=0.000000e+000 result=40 05:06:05 Config A/D Result=40 05:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:05 Get A/D filter: -9.255963e+061 result=40 05:06:05 Get A/D value=-858993460 result=40 05:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:05 Parameters OK 05:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:05 Set A/D data flow result=40 05:06:05 Set A/D channel type result=40 05:06:05 Set A/D encoding result=40 05:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:05 Set channel filter=0.000000e+000 result=40 05:06:05 Config A/D Result=40 05:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:05 Get A/D filter: -9.255963e+061 result=40 05:06:05 Get A/D value=-858993460 result=40 05:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:05 Aux= 05:06:05 Message to Camera, serial 263330 queued 05:06:42 Received message from Master: op=PointingHead serial=263343 05:06:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:06:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:06:43 Point started: ret=0 05:06:43 point_skyscan result=0 05:06:43 Check angles 05:06:43 SkyScan query 05:06:44 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.48<-17432 Statuses=0009 0009 05:06:44 Msec=0 True Az=109.185 Ze=-81.48 Az status=0009 Ze status=0009 05:06:44 Check angles 05:06:44 SkyScan query 05:06:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.855<-18857 Statuses=0008 0009 05:06:45 Msec=750 True Az=112.995 Ze=-102.855 Az status=0008 Ze status=0009 05:06:45 Check angles 05:06:45 SkyScan query 05:06:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.825<-20255 Statuses=0008 0009 05:06:45 Msec=1500 True Az=112.995 Ze=-123.825 Az status=0008 Ze status=0009 05:06:46 Check angles 05:06:46 SkyScan query 05:06:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 05:06:46 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 05:06:46 Check angles 05:06:46 SkyScan query 05:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.705<-23047 Statuses=0008 0009 05:06:47 Msec=3000 True Az=112.995 Ze=-165.705 Az status=0008 Ze status=0009 05:06:47 Check angles 05:06:47 SkyScan query 05:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:06:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:06:48 Message to Master queued w/err=0: serial=263343 error=0 05:06:53 Received message from Master: op=Filter serial=263344 05:06:53 Color wheel filter change from 0 to 0 05:06:53 FLIGetFilterPos err=0 currentPosition=0 05:06:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:53 Filter is already there-color wheel unchanged 05:06:53 Received message from Master: op=Shutter serial=263345 05:06:53 Shutter LASER open 05:06:53 Received message from Camera: op=State serial=263347 05:06:53 GetSingleValue result=40 Value=cccccccc 05:06:53 SkyScan query 05:06:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:06:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:54 Parameters OK 05:06:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:54 Set A/D data flow result=40 05:06:54 Set A/D channel type result=40 05:06:54 Set A/D encoding result=40 05:06:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:54 Set channel filter=0.000000e+000 result=40 05:06:54 Config A/D Result=40 05:06:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:54 Get A/D filter: -9.255963e+061 result=40 05:06:54 Get A/D value=-858993460 result=40 05:06:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:54 Parameters OK 05:06:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:54 Set A/D data flow result=40 05:06:54 Set A/D channel type result=40 05:06:54 Set A/D encoding result=40 05:06:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:54 Set channel filter=0.000000e+000 result=40 05:06:54 Config A/D Result=40 05:06:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:54 Get A/D filter: -9.255963e+061 result=40 05:06:54 Get A/D value=-858993460 result=40 05:06:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:54 Aux= 05:06:54 Message to Camera, serial 263347 queued 05:07:02 Received message from Master: op=Shutter serial=263357 05:07:02 Shutter LASER close 05:07:03 Received message from Master: op=PointingHead serial=263361 05:07:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:07:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:07:03 Point started: ret=0 05:07:03 point_skyscan result=0 05:07:04 Check angles 05:07:04 SkyScan query 05:07:04 SkyScan query done: ret=0 az=89.835<-5989 ze=157.155<-1523 Statuses=0009 0009 05:07:04 Msec=0 True Az=89.835 Ze=157.155 Az status=0009 Ze status=0009 05:07:04 Check angles 05:07:04 SkyScan query 05:07:05 SkyScan query done: ret=0 az=72<-4800 ze=135.795<-2947 Statuses=0009 0009 05:07:05 Msec=750 True Az=72 Ze=135.795 Az status=0009 Ze status=0009 05:07:05 Check angles 05:07:05 SkyScan query 05:07:06 SkyScan query done: ret=0 az=54.555<-3637 ze=114.81<-4346 Statuses=0009 0009 05:07:06 Msec=1500 True Az=54.555 Ze=114.81 Az status=0009 Ze status=0009 05:07:06 Check angles 05:07:06 SkyScan query 05:07:06 SkyScan query done: ret=0 az=40.98<-2732 ze=93.885<-5741 Statuses=0009 0009 05:07:06 Msec=2250 True Az=40.98 Ze=93.885 Az status=0009 Ze status=0009 05:07:07 Check angles 05:07:07 SkyScan query 05:07:07 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 05:07:07 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 05:07:07 Check angles 05:07:07 SkyScan query 05:07:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 05:07:08 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 05:07:08 Check angles 05:07:08 SkyScan query 05:07:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:07:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:07:09 Message to Master queued w/err=0: serial=263361 error=0 05:07:14 Received message from Master: op=Filter serial=263362 05:07:14 Color wheel filter change from 0 to 0 05:07:14 FLIGetFilterPos err=0 currentPosition=0 05:07:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:14 Filter is already there-color wheel unchanged 05:07:14 Received message from Master: op=Shutter serial=263363 05:07:14 Shutter LASER close 05:07:14 Received message from Camera: op=State serial=263365 05:07:14 GetSingleValue result=40 Value=cccccccc 05:07:14 SkyScan query 05:07:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:07:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:15 Parameters OK 05:07:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:15 Set A/D data flow result=40 05:07:15 Set A/D channel type result=40 05:07:15 Set A/D encoding result=40 05:07:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:15 Set channel filter=0.000000e+000 result=40 05:07:15 Config A/D Result=40 05:07:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:15 Get A/D filter: -9.255963e+061 result=40 05:07:15 Get A/D value=-858993460 result=40 05:07:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:15 Parameters OK 05:07:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:15 Set A/D data flow result=40 05:07:15 Set A/D channel type result=40 05:07:15 Set A/D encoding result=40 05:07:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:15 Set channel filter=0.000000e+000 result=40 05:07:15 Config A/D Result=40 05:07:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:15 Get A/D filter: -9.255963e+061 result=40 05:07:15 Get A/D value=-858993460 result=40 05:07:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:15 Aux= 05:07:15 Message to Camera, serial 263365 queued 05:07:52 Received message from Master: op=PointingHead serial=263378 05:07:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:07:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:07:52 Point started: ret=0 05:07:52 point_skyscan result=0 05:07:53 Check angles 05:07:53 SkyScan query 05:07:53 SkyScan query done: ret=0 az=40.995<-2733 ze=21.72<-10552 Statuses=0008 0009 05:07:53 Msec=0 True Az=40.995 Ze=21.72 Az status=0008 Ze status=0009 05:07:53 Check angles 05:07:53 SkyScan query 05:07:54 SkyScan query done: ret=0 az=41.01<-2734 ze=0.21<-11986 Statuses=0008 0009 05:07:54 Msec=750 True Az=41.01 Ze=0.21 Az status=0008 Ze status=0009 05:07:54 Check angles 05:07:54 SkyScan query 05:07:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.12<-13408 Statuses=0008 0009 05:07:55 Msec=1500 True Az=40.995 Ze=-21.12 Az status=0008 Ze status=0009 05:07:55 Check angles 05:07:55 SkyScan query 05:07:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 05:07:56 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 05:07:56 Check angles 05:07:56 SkyScan query 05:07:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:07:56 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:07:56 Message to Master queued w/err=0: serial=263378 error=0 05:08:01 Received message from Master: op=Filter serial=263379 05:08:01 Color wheel filter change from 0 to 0 05:08:01 FLIGetFilterPos err=0 currentPosition=0 05:08:01 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:01 Filter is already there-color wheel unchanged 05:08:02 Received message from Master: op=Shutter serial=263380 05:08:02 Shutter LASER close 05:08:02 Received message from Camera: op=State serial=263382 05:08:02 GetSingleValue result=40 Value=cccccccc 05:08:02 SkyScan query 05:08:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:08:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:02 Parameters OK 05:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:02 Set A/D data flow result=40 05:08:02 Set A/D channel type result=40 05:08:02 Set A/D encoding result=40 05:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:02 Set channel filter=0.000000e+000 result=40 05:08:02 Config A/D Result=40 05:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:02 Get A/D filter: -9.255963e+061 result=40 05:08:02 Get A/D value=-858993460 result=40 05:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:02 Parameters OK 05:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:02 Set A/D data flow result=40 05:08:02 Set A/D channel type result=40 05:08:02 Set A/D encoding result=40 05:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:02 Set channel filter=0.000000e+000 result=40 05:08:02 Config A/D Result=40 05:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:02 Get A/D filter: -9.255963e+061 result=40 05:08:02 Get A/D value=-858993460 result=40 05:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:02 Aux= 05:08:02 Message to Camera, serial 263382 queued 05:08:38 Received message from Master: op=PointingHead serial=263394 05:08:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:08:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:08:38 Point started: ret=0 05:08:38 point_skyscan result=0 05:08:39 Check angles 05:08:39 SkyScan query 05:08:40 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.535<-16569 Statuses=0009 0009 05:08:40 Msec=0 True Az=64.2 Ze=-68.535 Az status=0009 Ze status=0009 05:08:40 Check angles 05:08:40 SkyScan query 05:08:41 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.52<-17968 Statuses=0009 0009 05:08:41 Msec=750 True Az=81.645 Ze=-89.52 Az status=0009 Ze status=0009 05:08:41 Check angles 05:08:41 SkyScan query 05:08:41 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.49<-19366 Statuses=0009 0009 05:08:41 Msec=1500 True Az=99.12 Ze=-110.49 Az status=0009 Ze status=0009 05:08:41 Check angles 05:08:41 SkyScan query 05:08:42 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.4<-20760 Statuses=0009 0009 05:08:42 Msec=2250 True Az=116.52 Ze=-131.4 Az status=0009 Ze status=0009 05:08:42 Check angles 05:08:42 SkyScan query 05:08:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 05:08:43 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 05:08:43 Check angles 05:08:43 SkyScan query 05:08:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 05:08:44 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 05:08:44 Message to Master queued w/err=0: serial=263394 error=0 05:08:49 Received message from Master: op=Filter serial=263395 05:08:49 Color wheel filter change from 0 to 0 05:08:49 FLIGetFilterPos err=0 currentPosition=0 05:08:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:49 Filter is already there-color wheel unchanged 05:08:49 Received message from Master: op=Shutter serial=263396 05:08:49 Shutter LASER close 05:08:49 Received message from Camera: op=State serial=263398 05:08:49 GetSingleValue result=40 Value=cccccccc 05:08:49 SkyScan query 05:08:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:08:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:49 Parameters OK 05:08:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:49 Set A/D data flow result=40 05:08:49 Set A/D channel type result=40 05:08:49 Set A/D encoding result=40 05:08:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:49 Set channel filter=0.000000e+000 result=40 05:08:49 Config A/D Result=40 05:08:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:49 Get A/D filter: -9.255963e+061 result=40 05:08:49 Get A/D value=-858993460 result=40 05:08:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:49 Parameters OK 05:08:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:49 Set A/D data flow result=40 05:08:49 Set A/D channel type result=40 05:08:49 Set A/D encoding result=40 05:08:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:49 Set channel filter=0.000000e+000 result=40 05:08:49 Config A/D Result=40 05:08:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:49 Get A/D filter: -9.255963e+061 result=40 05:08:49 Get A/D value=-858993460 result=40 05:08:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:49 Aux= 05:08:49 Message to Camera, serial 263398 queued 05:09:26 Received message from Master: op=PointingHead serial=263411 05:09:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:09:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:09:26 Point started: ret=0 05:09:26 point_skyscan result=0 05:09:27 Check angles 05:09:27 SkyScan query 05:09:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.345<-23423 Statuses=0009 0009 05:09:28 Msec=0 True Az=113.01 Ze=-171.345 Az status=0009 Ze status=0009 05:09:28 Check angles 05:09:28 SkyScan query 05:09:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:09:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:09:29 Message to Master queued w/err=0: serial=263411 error=0 05:09:34 Received message from Master: op=Filter serial=263412 05:09:34 Color wheel filter change from 0 to 0 05:09:34 FLIGetFilterPos err=0 currentPosition=0 05:09:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:34 Filter is already there-color wheel unchanged 05:09:34 Received message from Master: op=Shutter serial=263413 05:09:34 Shutter LASER open 05:09:34 Received message from Camera: op=State serial=263415 05:09:34 GetSingleValue result=40 Value=cccccccc 05:09:34 SkyScan query 05:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:09:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:35 Parameters OK 05:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:35 Set A/D data flow result=40 05:09:35 Set A/D channel type result=40 05:09:35 Set A/D encoding result=40 05:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:35 Set channel filter=0.000000e+000 result=40 05:09:35 Config A/D Result=40 05:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:35 Get A/D filter: -9.255963e+061 result=40 05:09:35 Get A/D value=-858993460 result=40 05:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:35 Parameters OK 05:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:35 Set A/D data flow result=40 05:09:35 Set A/D channel type result=40 05:09:35 Set A/D encoding result=40 05:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:35 Set channel filter=0.000000e+000 result=40 05:09:35 Config A/D Result=40 05:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:35 Get A/D filter: -9.255963e+061 result=40 05:09:35 Get A/D value=-858993460 result=40 05:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:35 Aux= 05:09:35 Message to Camera, serial 263415 queued 05:09:43 Received message from Master: op=Shutter serial=263425 05:09:43 Shutter LASER close 05:09:43 Received message from Master: op=PointingHead serial=263429 05:09:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:09:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:09:44 Point started: ret=0 05:09:44 point_skyscan result=0 05:09:45 Check angles 05:09:45 SkyScan query 05:09:45 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.875<-21525 Statuses=0009 0009 05:09:45 Msec=0 True Az=136.305 Ze=-142.875 Az status=0009 Ze status=0009 05:09:45 Check angles 05:09:45 SkyScan query 05:09:46 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.92<-20128 Statuses=0009 0009 05:09:46 Msec=750 True Az=153.78 Ze=-121.92 Az status=0009 Ze status=0009 05:09:46 Check angles 05:09:46 SkyScan query 05:09:47 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.95<-18730 Statuses=0009 0009 05:09:47 Msec=1500 True Az=171.36 Ze=-100.95 Az status=0009 Ze status=0009 05:09:47 Check angles 05:09:47 SkyScan query 05:09:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.07<-17338 Statuses=0008 0009 05:09:47 Msec=2250 True Az=176.01 Ze=-80.07 Az status=0008 Ze status=0009 05:09:48 Check angles 05:09:48 SkyScan query 05:09:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.59<-15906 Statuses=0008 0009 05:09:48 Msec=3000 True Az=176.01 Ze=-58.59 Az status=0008 Ze status=0009 05:09:48 Check angles 05:09:48 SkyScan query 05:09:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 05:09:49 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 05:09:49 Message to Master queued w/err=0: serial=263429 error=0 05:09:54 Received message from Master: op=Filter serial=263430 05:09:54 Color wheel filter change from 0 to 0 05:09:54 FLIGetFilterPos err=0 currentPosition=0 05:09:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:54 Filter is already there-color wheel unchanged 05:09:54 Received message from Master: op=Shutter serial=263431 05:09:54 Shutter LASER close 05:09:54 Received message from Camera: op=State serial=263433 05:09:54 GetSingleValue result=40 Value=cccccccc 05:09:54 SkyScan query 05:09:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:09:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:55 Parameters OK 05:09:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:55 Set A/D data flow result=40 05:09:55 Set A/D channel type result=40 05:09:55 Set A/D encoding result=40 05:09:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:55 Set channel filter=0.000000e+000 result=40 05:09:55 Config A/D Result=40 05:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:55 Get A/D filter: -9.255963e+061 result=40 05:09:55 Get A/D value=-858993460 result=40 05:09:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:55 Parameters OK 05:09:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:55 Set A/D data flow result=40 05:09:55 Set A/D channel type result=40 05:09:55 Set A/D encoding result=40 05:09:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:55 Set channel filter=0.000000e+000 result=40 05:09:55 Config A/D Result=40 05:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:55 Get A/D filter: -9.255963e+061 result=40 05:09:55 Get A/D value=-858993460 result=40 05:09:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:55 Aux= 05:09:55 Message to Camera, serial 263433 queued 05:10:32 Received message from Master: op=PointingHead serial=263446 05:10:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:10:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:10:32 Point started: ret=0 05:10:32 point_skyscan result=0 05:10:33 Check angles 05:10:33 SkyScan query 05:10:33 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.915<-13461 Statuses=0009 0009 05:10:33 Msec=0 True Az=153.12 Ze=-21.915 Az status=0009 Ze status=0009 05:10:34 Check angles 05:10:34 SkyScan query 05:10:34 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.495<-12033 Statuses=0009 0009 05:10:34 Msec=750 True Az=135.27 Ze=-0.495 Az status=0009 Ze status=0009 05:10:34 Check angles 05:10:34 SkyScan query 05:10:35 SkyScan query done: ret=0 az=117.675<-7845 ze=20.49<-10634 Statuses=0009 0009 05:10:35 Msec=1500 True Az=117.675 Ze=20.49 Az status=0009 Ze status=0009 05:10:35 Check angles 05:10:35 SkyScan query 05:10:36 SkyScan query done: ret=0 az=100.365<-6691 ze=41.445<-9237 Statuses=0009 0009 05:10:36 Msec=2250 True Az=100.365 Ze=41.445 Az status=0009 Ze status=0009 05:10:36 Check angles 05:10:36 SkyScan query 05:10:36 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 05:10:36 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 05:10:37 Check angles 05:10:37 SkyScan query 05:10:37 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 05:10:37 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 05:10:37 Message to Master queued w/err=0: serial=263446 error=0 05:10:42 Received message from Master: op=Filter serial=263447 05:10:42 Color wheel filter change from 0 to 0 05:10:42 FLIGetFilterPos err=0 currentPosition=0 05:10:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:42 Filter is already there-color wheel unchanged 05:10:42 Received message from Master: op=Shutter serial=263448 05:10:42 Shutter LASER close 05:10:42 Received message from Camera: op=State serial=263450 05:10:42 GetSingleValue result=40 Value=cccccccc 05:10:42 SkyScan query 05:10:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:10:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:43 Parameters OK 05:10:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:43 Set A/D data flow result=40 05:10:43 Set A/D channel type result=40 05:10:43 Set A/D encoding result=40 05:10:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:43 Set channel filter=0.000000e+000 result=40 05:10:43 Config A/D Result=40 05:10:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:43 Get A/D filter: -9.255963e+061 result=40 05:10:43 Get A/D value=-858993460 result=40 05:10:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:43 Parameters OK 05:10:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:43 Set A/D data flow result=40 05:10:43 Set A/D channel type result=40 05:10:43 Set A/D encoding result=40 05:10:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:43 Set channel filter=0.000000e+000 result=40 05:10:43 Config A/D Result=40 05:10:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:43 Get A/D filter: -9.255963e+061 result=40 05:10:43 Get A/D value=-858993460 result=40 05:10:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:43 Aux= 05:10:43 Message to Camera, serial 263450 queued 05:11:20 Received message from Master: op=PointingHead serial=263463 05:11:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:11:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:11:20 Point started: ret=0 05:11:20 point_skyscan result=0 05:11:21 Check angles 05:11:21 SkyScan query 05:11:22 SkyScan query done: ret=0 az=85.995<-5733 ze=21.765<-10549 Statuses=0008 0009 05:11:22 Msec=0 True Az=85.995 Ze=21.765 Az status=0008 Ze status=0009 05:11:22 Check angles 05:11:22 SkyScan query 05:11:22 SkyScan query done: ret=0 az=85.995<-5733 ze=0.885<-11941 Statuses=0008 0009 05:11:22 Msec=750 True Az=85.995 Ze=0.885 Az status=0008 Ze status=0009 05:11:23 Check angles 05:11:23 SkyScan query 05:11:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.1<-13340 Statuses=0008 0009 05:11:23 Msec=1500 True Az=85.995 Ze=-20.1 Az status=0008 Ze status=0009 05:11:23 Check angles 05:11:23 SkyScan query 05:11:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.01<-14734 Statuses=0008 0009 05:11:24 Msec=2250 True Az=85.995 Ze=-41.01 Az status=0008 Ze status=0009 05:11:24 Check angles 05:11:24 SkyScan query 05:11:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:11:25 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:11:25 Message to Master queued w/err=0: serial=263463 error=0 05:11:30 Received message from Master: op=Filter serial=263464 05:11:30 Color wheel filter change from 0 to 0 05:11:30 FLIGetFilterPos err=0 currentPosition=0 05:11:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:30 Filter is already there-color wheel unchanged 05:11:30 Received message from Master: op=Shutter serial=263465 05:11:30 Shutter LASER close 05:11:30 Received message from Camera: op=State serial=263467 05:11:30 GetSingleValue result=40 Value=cccccccc 05:11:30 SkyScan query 05:11:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:11:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:30 Parameters OK 05:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:30 Set A/D data flow result=40 05:11:30 Set A/D channel type result=40 05:11:30 Set A/D encoding result=40 05:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:30 Set channel filter=0.000000e+000 result=40 05:11:30 Config A/D Result=40 05:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:30 Get A/D filter: -9.255963e+061 result=40 05:11:30 Get A/D value=-858993460 result=40 05:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:30 Parameters OK 05:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:30 Set A/D data flow result=40 05:11:30 Set A/D channel type result=40 05:11:30 Set A/D encoding result=40 05:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:30 Set channel filter=0.000000e+000 result=40 05:11:30 Config A/D Result=40 05:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:30 Get A/D filter: -9.255963e+061 result=40 05:11:30 Get A/D value=-858993460 result=40 05:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:30 Aux= 05:11:30 Message to Camera, serial 263467 queued 05:12:07 Received message from Master: op=PointingHead serial=263480 05:12:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:12:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:12:08 Point started: ret=0 05:12:08 point_skyscan result=0 05:12:08 Check angles 05:12:08 SkyScan query 05:12:09 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.225<-17415 Statuses=0009 0009 05:12:09 Msec=0 True Az=108.975 Ze=-81.225 Az status=0009 Ze status=0009 05:12:09 Check angles 05:12:09 SkyScan query 05:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 05:12:10 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 05:12:10 Check angles 05:12:10 SkyScan query 05:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.135<-20209 Statuses=0008 0009 05:12:10 Msec=1500 True Az=112.995 Ze=-123.135 Az status=0008 Ze status=0009 05:12:11 Check angles 05:12:11 SkyScan query 05:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.09<-21606 Statuses=0008 0009 05:12:11 Msec=2250 True Az=112.995 Ze=-144.09 Az status=0008 Ze status=0009 05:12:11 Check angles 05:12:11 SkyScan query 05:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 05:12:12 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 05:12:12 Check angles 05:12:12 SkyScan query 05:12:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:12:13 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:12:13 Message to Master queued w/err=0: serial=263480 error=0 05:12:18 Received message from Master: op=Filter serial=263481 05:12:18 Color wheel filter change from 0 to 0 05:12:18 FLIGetFilterPos err=0 currentPosition=0 05:12:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:18 Filter is already there-color wheel unchanged 05:12:18 Received message from Master: op=Shutter serial=263482 05:12:18 Shutter LASER open 05:12:18 Received message from Camera: op=State serial=263484 05:12:18 GetSingleValue result=40 Value=cccccccc 05:12:18 SkyScan query 05:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:12:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:19 Parameters OK 05:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:19 Set A/D data flow result=40 05:12:19 Set A/D channel type result=40 05:12:19 Set A/D encoding result=40 05:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:19 Set channel filter=0.000000e+000 result=40 05:12:19 Config A/D Result=40 05:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:19 Get A/D filter: -9.255963e+061 result=40 05:12:19 Get A/D value=-858993460 result=40 05:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:19 Parameters OK 05:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:19 Set A/D data flow result=40 05:12:19 Set A/D channel type result=40 05:12:19 Set A/D encoding result=40 05:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:19 Set channel filter=0.000000e+000 result=40 05:12:19 Config A/D Result=40 05:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:19 Get A/D filter: -9.255963e+061 result=40 05:12:19 Get A/D value=-858993460 result=40 05:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:19 Aux= 05:12:19 Message to Camera, serial 263484 queued 05:12:27 Received message from Master: op=Shutter serial=263494 05:12:27 Shutter LASER close 05:12:27 Received message from Master: op=PointingHead serial=263498 05:12:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:12:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:12:28 Point started: ret=0 05:12:28 point_skyscan result=0 05:12:29 Check angles 05:12:29 SkyScan query 05:12:29 SkyScan query done: ret=0 az=89.37<-5958 ze=156.78<-1548 Statuses=0009 0009 05:12:29 Msec=0 True Az=89.37 Ze=156.78 Az status=0009 Ze status=0009 05:12:29 Check angles 05:12:29 SkyScan query 05:12:30 SkyScan query done: ret=0 az=71.865<-4791 ze=135.84<-2944 Statuses=0009 0009 05:12:30 Msec=750 True Az=71.865 Ze=135.84 Az status=0009 Ze status=0009 05:12:30 Check angles 05:12:30 SkyScan query 05:12:31 SkyScan query done: ret=0 az=54.42<-3628 ze=114.855<-4343 Statuses=0009 0009 05:12:31 Msec=1500 True Az=54.42 Ze=114.855 Az status=0009 Ze status=0009 05:12:31 Check angles 05:12:31 SkyScan query 05:12:31 SkyScan query done: ret=0 az=40.995<-2733 ze=93.495<-5767 Statuses=0009 0009 05:12:31 Msec=2250 True Az=40.995 Ze=93.495 Az status=0009 Ze status=0009 05:12:32 Check angles 05:12:32 SkyScan query 05:12:32 SkyScan query done: ret=0 az=40.995<-2733 ze=72.075<-7195 Statuses=0008 0009 05:12:32 Msec=3000 True Az=40.995 Ze=72.075 Az status=0008 Ze status=0009 05:12:32 Check angles 05:12:32 SkyScan query 05:12:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.095<-8527 Statuses=0008 0009 05:12:33 Msec=3750 True Az=40.995 Ze=52.095 Az status=0008 Ze status=0009 05:12:33 Check angles 05:12:33 SkyScan query 05:12:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:12:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:12:34 Message to Master queued w/err=0: serial=263498 error=0 05:12:39 Received message from Master: op=Filter serial=263499 05:12:39 Color wheel filter change from 0 to 0 05:12:39 FLIGetFilterPos err=0 currentPosition=0 05:12:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:39 Filter is already there-color wheel unchanged 05:12:39 Received message from Master: op=Shutter serial=263500 05:12:39 Shutter LASER close 05:12:39 Received message from Camera: op=State serial=263502 05:12:39 GetSingleValue result=40 Value=cccccccc 05:12:39 SkyScan query 05:12:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:12:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:40 Parameters OK 05:12:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:40 Set A/D data flow result=40 05:12:40 Set A/D channel type result=40 05:12:40 Set A/D encoding result=40 05:12:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:40 Set channel filter=0.000000e+000 result=40 05:12:40 Config A/D Result=40 05:12:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:40 Get A/D filter: -9.255963e+061 result=40 05:12:40 Get A/D value=-858993460 result=40 05:12:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:40 Parameters OK 05:12:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:40 Set A/D data flow result=40 05:12:40 Set A/D channel type result=40 05:12:40 Set A/D encoding result=40 05:12:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:40 Set channel filter=0.000000e+000 result=40 05:12:40 Config A/D Result=40 05:12:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:40 Get A/D filter: -9.255963e+061 result=40 05:12:40 Get A/D value=-858993460 result=40 05:12:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:40 Aux= 05:12:40 Message to Camera, serial 263502 queued 05:13:17 Received message from Master: op=PointingHead serial=263515 05:13:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:13:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:13:17 Point started: ret=0 05:13:17 point_skyscan result=0 05:13:18 Check angles 05:13:18 SkyScan query 05:13:18 SkyScan query done: ret=0 az=40.995<-2733 ze=21.45<-10570 Statuses=0008 0009 05:13:18 Msec=0 True Az=40.995 Ze=21.45 Az status=0008 Ze status=0009 05:13:19 Check angles 05:13:19 SkyScan query 05:13:19 SkyScan query done: ret=0 az=40.995<-2733 ze=0.465<-11969 Statuses=0008 0009 05:13:19 Msec=750 True Az=40.995 Ze=0.465 Az status=0008 Ze status=0009 05:13:19 Check angles 05:13:19 SkyScan query 05:13:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.955<-13397 Statuses=0008 0009 05:13:20 Msec=1500 True Az=40.995 Ze=-20.955 Az status=0008 Ze status=0009 05:13:20 Check angles 05:13:20 SkyScan query 05:13:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 05:13:21 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 05:13:21 Check angles 05:13:21 SkyScan query 05:13:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:13:21 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:13:21 Message to Master queued w/err=0: serial=263515 error=0 05:13:26 Received message from Master: op=Filter serial=263516 05:13:26 Color wheel filter change from 0 to 0 05:13:26 FLIGetFilterPos err=0 currentPosition=0 05:13:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:26 Filter is already there-color wheel unchanged 05:13:27 Received message from Master: op=Shutter serial=263517 05:13:27 Shutter LASER close 05:13:27 Received message from Camera: op=State serial=263519 05:13:27 GetSingleValue result=40 Value=cccccccc 05:13:27 SkyScan query 05:13:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:13:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:27 Parameters OK 05:13:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:27 Set A/D data flow result=40 05:13:27 Set A/D channel type result=40 05:13:27 Set A/D encoding result=40 05:13:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:27 Set channel filter=0.000000e+000 result=40 05:13:27 Config A/D Result=40 05:13:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:27 Get A/D filter: -9.255963e+061 result=40 05:13:27 Get A/D value=-858993460 result=40 05:13:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:27 Parameters OK 05:13:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:27 Set A/D data flow result=40 05:13:27 Set A/D channel type result=40 05:13:27 Set A/D encoding result=40 05:13:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:27 Set channel filter=0.000000e+000 result=40 05:13:27 Config A/D Result=40 05:13:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:27 Get A/D filter: -9.255963e+061 result=40 05:13:27 Get A/D value=-858993460 result=40 05:13:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:27 Aux= 05:13:27 Message to Camera, serial 263519 queued 05:14:04 Received message from Master: op=PointingHead serial=263532 05:14:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:14:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:14:04 Point started: ret=0 05:14:04 point_skyscan result=0 05:14:05 Check angles 05:14:05 SkyScan query 05:14:06 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.49<-16566 Statuses=0009 0009 05:14:06 Msec=0 True Az=64.2 Ze=-68.49 Az status=0009 Ze status=0009 05:14:06 Check angles 05:14:06 SkyScan query 05:14:07 SkyScan query done: ret=0 az=81.705<-5447 ze=-89.46<-17964 Statuses=0009 0009 05:14:07 Msec=750 True Az=81.705 Ze=-89.46 Az status=0009 Ze status=0009 05:14:07 Check angles 05:14:07 SkyScan query 05:14:07 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.43<-19362 Statuses=0009 0009 05:14:07 Msec=1500 True Az=99.18 Ze=-110.43 Az status=0009 Ze status=0009 05:14:07 Check angles 05:14:07 SkyScan query 05:14:08 SkyScan query done: ret=0 az=116.505<-7767 ze=-131.355<-20757 Statuses=0009 0009 05:14:08 Msec=2250 True Az=116.505 Ze=-131.355 Az status=0009 Ze status=0009 05:14:08 Check angles 05:14:08 SkyScan query 05:14:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 05:14:09 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 05:14:09 Check angles 05:14:09 SkyScan query 05:14:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:14:10 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:14:10 Message to Master queued w/err=0: serial=263532 error=0 05:14:15 Received message from Master: op=Filter serial=263533 05:14:15 Color wheel filter change from 0 to 0 05:14:15 FLIGetFilterPos err=0 currentPosition=0 05:14:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:15 Filter is already there-color wheel unchanged 05:14:15 Received message from Master: op=Shutter serial=263534 05:14:15 Shutter LASER close 05:14:15 Received message from Camera: op=State serial=263536 05:14:15 GetSingleValue result=40 Value=cccccccc 05:14:15 SkyScan query 05:14:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:14:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:15 Parameters OK 05:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:15 Set A/D data flow result=40 05:14:15 Set A/D channel type result=40 05:14:15 Set A/D encoding result=40 05:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:15 Set channel filter=0.000000e+000 result=40 05:14:15 Config A/D Result=40 05:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:15 Get A/D filter: -9.255963e+061 result=40 05:14:15 Get A/D value=-858993460 result=40 05:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:15 Parameters OK 05:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:15 Set A/D data flow result=40 05:14:15 Set A/D channel type result=40 05:14:15 Set A/D encoding result=40 05:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:15 Set channel filter=0.000000e+000 result=40 05:14:15 Config A/D Result=40 05:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:15 Get A/D filter: -9.255963e+061 result=40 05:14:15 Get A/D value=-858993460 result=40 05:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:15 Aux= 05:14:15 Message to Camera, serial 263536 queued 05:14:52 Received message from Master: op=PointingHead serial=263549 05:14:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:14:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:14:53 Point started: ret=0 05:14:53 point_skyscan result=0 05:14:53 Check angles 05:14:53 SkyScan query 05:14:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 05:14:54 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 05:14:54 Check angles 05:14:54 SkyScan query 05:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:14:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:14:55 Message to Master queued w/err=0: serial=263549 error=0 05:15:00 Received message from Master: op=Filter serial=263550 05:15:00 Color wheel filter change from 0 to 0 05:15:00 FLIGetFilterPos err=0 currentPosition=0 05:15:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:00 Filter is already there-color wheel unchanged 05:15:00 Received message from Master: op=Shutter serial=263551 05:15:00 Shutter LASER open 05:15:00 Received message from Camera: op=State serial=263553 05:15:00 GetSingleValue result=40 Value=cccccccc 05:15:00 SkyScan query 05:15:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:15:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:01 Parameters OK 05:15:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:01 Set A/D data flow result=40 05:15:01 Set A/D channel type result=40 05:15:01 Set A/D encoding result=40 05:15:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:01 Set channel filter=0.000000e+000 result=40 05:15:01 Config A/D Result=40 05:15:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:01 Get A/D filter: -9.255963e+061 result=40 05:15:01 Get A/D value=-858993460 result=40 05:15:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:01 Parameters OK 05:15:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:01 Set A/D data flow result=40 05:15:01 Set A/D channel type result=40 05:15:01 Set A/D encoding result=40 05:15:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:01 Set channel filter=0.000000e+000 result=40 05:15:01 Config A/D Result=40 05:15:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:01 Get A/D filter: -9.255963e+061 result=40 05:15:01 Get A/D value=-858993460 result=40 05:15:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:01 Aux= 05:15:01 Message to Camera, serial 263553 queued 05:15:09 Received message from Master: op=Shutter serial=263563 05:15:09 Shutter LASER close 05:15:10 Received message from Master: op=PointingHead serial=263567 05:15:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:15:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:15:10 Point started: ret=0 [UTC 2018-12-19 05:15:10] 05:15:10 point_skyscan result=0 05:15:11 Check angles 05:15:11 SkyScan query 05:15:11 SkyScan query done: ret=0 az=137.88<-9192 ze=-141.33<-21422 Statuses=0009 0009 05:15:11 Msec=0 True Az=137.88 Ze=-141.33 Az status=0009 Ze status=0009 05:15:11 Check angles 05:15:11 SkyScan query 05:15:12 SkyScan query done: ret=0 az=155.625<-10375 ze=-119.94<-19996 Statuses=0009 0009 05:15:12 Msec=750 True Az=155.625 Ze=-119.94 Az status=0009 Ze status=0009 05:15:12 Check angles 05:15:12 SkyScan query 05:15:13 SkyScan query done: ret=0 az=172.98<-11532 ze=-98.985<-18599 Statuses=0009 0009 05:15:13 Msec=1500 True Az=172.98 Ze=-98.985 Az status=0009 Ze status=0009 05:15:13 Check angles 05:15:13 SkyScan query 05:15:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-77.595<-17173 Statuses=0008 0009 05:15:14 Msec=2250 True Az=176.01 Ze=-77.595 Az status=0008 Ze status=0009 05:15:14 Check angles 05:15:14 SkyScan query 05:15:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-56.565<-15771 Statuses=0008 0009 05:15:14 Msec=3000 True Az=176.01 Ze=-56.565 Az status=0008 Ze status=0009 05:15:14 Check angles 05:15:14 SkyScan query 05:15:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:15:15 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:15:15 Message to Master queued w/err=0: serial=263567 error=0 05:15:20 Received message from Master: op=Filter serial=263568 05:15:20 Color wheel filter change from 0 to 0 05:15:20 FLIGetFilterPos err=0 currentPosition=0 05:15:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:20 Filter is already there-color wheel unchanged 05:15:20 Received message from Master: op=Shutter serial=263569 05:15:20 Shutter LASER close 05:15:20 Received message from Camera: op=State serial=263571 05:15:20 GetSingleValue result=40 Value=cccccccc 05:15:20 SkyScan query 05:15:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:15:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:21 Parameters OK 05:15:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:21 Set A/D data flow result=40 05:15:21 Set A/D channel type result=40 05:15:21 Set A/D encoding result=40 05:15:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:21 Set channel filter=0.000000e+000 result=40 05:15:21 Config A/D Result=40 05:15:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:21 Get A/D filter: -9.255963e+061 result=40 05:15:21 Get A/D value=-858993460 result=40 05:15:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:21 Parameters OK 05:15:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:21 Set A/D data flow result=40 05:15:21 Set A/D channel type result=40 05:15:21 Set A/D encoding result=40 05:15:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:21 Set channel filter=0.000000e+000 result=40 05:15:21 Config A/D Result=40 05:15:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:21 Get A/D filter: -9.255963e+061 result=40 05:15:21 Get A/D value=-858993460 result=40 05:15:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:21 Aux= 05:15:21 Message to Camera, serial 263571 queued 05:15:27 Received message from Master: op=Identify serial=263572 [UTC 2018-12-19 05:15:52] 05:15:58 Received message from Master: op=PointingHead serial=263587 05:15:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:15:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:15:58 Point started: ret=0 05:15:58 point_skyscan result=0 05:15:59 Check angles 05:15:59 SkyScan query 05:16:00 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.525<-13435 Statuses=0009 0009 05:16:00 Msec=0 True Az=152.76 Ze=-21.525 Az status=0009 Ze status=0009 05:16:00 Check angles 05:16:00 SkyScan query 05:16:00 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.57<-12038 Statuses=0009 0009 05:16:00 Msec=750 True Az=135.375 Ze=-0.57 Az status=0009 Ze status=0009 05:16:00 Check angles 05:16:00 SkyScan query 05:16:01 SkyScan query done: ret=0 az=117.84<-7856 ze=20.52<-10632 Statuses=0009 0009 05:16:01 Msec=1500 True Az=117.84 Ze=20.52 Az status=0009 Ze status=0009 05:16:01 Check angles 05:16:01 SkyScan query 05:16:02 SkyScan query done: ret=0 az=100.455<-6697 ze=41.37<-9242 Statuses=0009 0009 05:16:02 Msec=2250 True Az=100.455 Ze=41.37 Az status=0009 Ze status=0009 05:16:02 Check angles 05:16:02 SkyScan query 05:16:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 05:16:03 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 05:16:03 Check angles 05:16:03 SkyScan query 05:16:03 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 05:16:03 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 05:16:03 Message to Master queued w/err=0: serial=263587 error=0 05:16:08 Received message from Master: op=Filter serial=263588 05:16:08 Color wheel filter change from 0 to 0 05:16:08 FLIGetFilterPos err=0 currentPosition=0 05:16:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:08 Filter is already there-color wheel unchanged 05:16:08 Received message from Master: op=Shutter serial=263589 05:16:08 Shutter LASER close 05:16:08 Received message from Camera: op=State serial=263591 05:16:08 GetSingleValue result=40 Value=cccccccc 05:16:08 SkyScan query 05:16:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:16:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:09 Parameters OK 05:16:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:09 Set A/D data flow result=40 05:16:09 Set A/D channel type result=40 05:16:09 Set A/D encoding result=40 05:16:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:09 Set channel filter=0.000000e+000 result=40 05:16:09 Config A/D Result=40 05:16:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:09 Get A/D filter: -9.255963e+061 result=40 05:16:09 Get A/D value=-858993460 result=40 05:16:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:09 Parameters OK 05:16:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:09 Set A/D data flow result=40 05:16:09 Set A/D channel type result=40 05:16:09 Set A/D encoding result=40 05:16:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:09 Set channel filter=0.000000e+000 result=40 05:16:09 Config A/D Result=40 05:16:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:09 Get A/D filter: -9.255963e+061 result=40 05:16:09 Get A/D value=-858993460 result=40 05:16:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:09 Aux= 05:16:09 Message to Camera, serial 263591 queued 05:16:46 Received message from Master: op=PointingHead serial=263604 05:16:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:16:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:16:47 Point started: ret=0 05:16:47 point_skyscan result=0 05:16:47 Check angles 05:16:47 SkyScan query 05:16:48 SkyScan query done: ret=0 az=85.98<-5732 ze=21.255<-10583 Statuses=0008 0009 05:16:48 Msec=0 True Az=85.98 Ze=21.255 Az status=0008 Ze status=0009 05:16:48 Check angles 05:16:48 SkyScan query 05:16:49 SkyScan query done: ret=0 az=85.995<-5733 ze=0.345<-11977 Statuses=0008 0009 05:16:49 Msec=750 True Az=85.995 Ze=0.345 Az status=0008 Ze status=0009 05:16:49 Check angles 05:16:49 SkyScan query 05:16:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.61<-13374 Statuses=0008 0009 05:16:49 Msec=1500 True Az=85.995 Ze=-20.61 Az status=0008 Ze status=0009 05:16:50 Check angles 05:16:50 SkyScan query 05:16:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.535<-14769 Statuses=0008 0009 05:16:50 Msec=2250 True Az=85.995 Ze=-41.535 Az status=0008 Ze status=0009 05:16:50 Check angles 05:16:50 SkyScan query 05:16:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:16:51 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:16:51 Message to Master queued w/err=0: serial=263604 error=0 05:16:56 Received message from Master: op=Filter serial=263605 05:16:56 Color wheel filter change from 0 to 0 05:16:56 FLIGetFilterPos err=0 currentPosition=0 05:16:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:56 Filter is already there-color wheel unchanged 05:16:56 Received message from Master: op=Shutter serial=263606 05:16:56 Shutter LASER close 05:16:56 Received message from Camera: op=State serial=263608 05:16:56 GetSingleValue result=40 Value=cccccccc 05:16:56 SkyScan query 05:16:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:16:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:57 Parameters OK 05:16:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:57 Set A/D data flow result=40 05:16:57 Set A/D channel type result=40 05:16:57 Set A/D encoding result=40 05:16:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:57 Set channel filter=0.000000e+000 result=40 05:16:57 Config A/D Result=40 05:16:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:57 Get A/D filter: -9.255963e+061 result=40 05:16:57 Get A/D value=-858993460 result=40 05:16:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:57 Parameters OK 05:16:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:57 Set A/D data flow result=40 05:16:57 Set A/D channel type result=40 05:16:57 Set A/D encoding result=40 05:16:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:57 Set channel filter=0.000000e+000 result=40 05:16:57 Config A/D Result=40 05:16:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:57 Get A/D filter: -9.255963e+061 result=40 05:16:57 Get A/D value=-858993460 result=40 05:16:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:57 Aux= 05:16:57 Message to Camera, serial 263608 queued 05:17:33 Received message from Master: op=PointingHead serial=263621 05:17:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:17:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:17:34 Point started: ret=0 05:17:34 point_skyscan result=0 05:17:35 Check angles 05:17:35 SkyScan query 05:17:35 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.21<-17414 Statuses=0009 0009 05:17:35 Msec=0 True Az=108.975 Ze=-81.21 Az status=0009 Ze status=0009 05:17:35 Check angles 05:17:35 SkyScan query 05:17:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 05:17:36 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 05:17:36 Check angles 05:17:36 SkyScan query 05:17:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.02<-20268 Statuses=0008 0009 05:17:37 Msec=1500 True Az=112.995 Ze=-124.02 Az status=0008 Ze status=0009 05:17:37 Check angles 05:17:37 SkyScan query 05:17:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.93<-21662 Statuses=0008 0009 05:17:37 Msec=2250 True Az=112.995 Ze=-144.93 Az status=0008 Ze status=0009 05:17:38 Check angles 05:17:38 SkyScan query 05:17:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 05:17:38 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 05:17:38 Check angles 05:17:38 SkyScan query 05:17:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:17:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:17:39 Message to Master queued w/err=0: serial=263621 error=0 05:17:44 Received message from Master: op=Filter serial=263622 05:17:44 Color wheel filter change from 0 to 0 05:17:44 FLIGetFilterPos err=0 currentPosition=0 05:17:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:44 Filter is already there-color wheel unchanged 05:17:44 Received message from Master: op=Shutter serial=263623 05:17:44 Shutter LASER open 05:17:44 Received message from Camera: op=State serial=263625 05:17:44 GetSingleValue result=40 Value=cccccccc 05:17:44 SkyScan query 05:17:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:17:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:45 Parameters OK 05:17:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:45 Set A/D data flow result=40 05:17:45 Set A/D channel type result=40 05:17:45 Set A/D encoding result=40 05:17:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:45 Set channel filter=0.000000e+000 result=40 05:17:45 Config A/D Result=40 05:17:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:45 Get A/D filter: -9.255963e+061 result=40 05:17:45 Get A/D value=-858993460 result=40 05:17:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:45 Parameters OK 05:17:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:45 Set A/D data flow result=40 05:17:45 Set A/D channel type result=40 05:17:45 Set A/D encoding result=40 05:17:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:45 Set channel filter=0.000000e+000 result=40 05:17:45 Config A/D Result=40 05:17:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:45 Get A/D filter: -9.255963e+061 result=40 05:17:45 Get A/D value=-858993460 result=40 05:17:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:45 Aux= 05:17:45 Message to Camera, serial 263625 queued 05:17:53 Received message from Master: op=Shutter serial=263635 05:17:53 Shutter LASER close 05:17:54 Received message from Master: op=PointingHead serial=263639 05:17:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:17:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:17:54 Point started: ret=0 05:17:54 point_skyscan result=0 05:17:55 Check angles 05:17:55 SkyScan query 05:17:55 SkyScan query done: ret=0 az=89.835<-5989 ze=157.155<-1523 Statuses=0009 0009 05:17:55 Msec=0 True Az=89.835 Ze=157.155 Az status=0009 Ze status=0009 05:17:56 Check angles 05:17:56 SkyScan query 05:17:56 SkyScan query done: ret=0 az=72.285<-4819 ze=136.215<-2919 Statuses=0009 0009 05:17:56 Msec=750 True Az=72.285 Ze=136.215 Az status=0009 Ze status=0009 05:17:56 Check angles 05:17:56 SkyScan query 05:17:57 SkyScan query done: ret=0 az=54.945<-3663 ze=115.26<-4316 Statuses=0009 0009 05:17:57 Msec=1500 True Az=54.945 Ze=115.26 Az status=0009 Ze status=0009 05:17:57 Check angles 05:17:57 SkyScan query 05:17:58 SkyScan query done: ret=0 az=40.995<-2733 ze=94.29<-5714 Statuses=0009 0009 05:17:58 Msec=2250 True Az=40.995 Ze=94.29 Az status=0009 Ze status=0009 05:17:58 Check angles 05:17:58 SkyScan query 05:17:58 SkyScan query done: ret=0 az=40.995<-2733 ze=73.32<-7112 Statuses=0008 0009 05:17:58 Msec=3000 True Az=40.995 Ze=73.32 Az status=0008 Ze status=0009 05:17:59 Check angles 05:17:59 SkyScan query 05:17:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.785<-8481 Statuses=0008 0009 05:17:59 Msec=3750 True Az=40.995 Ze=52.785 Az status=0008 Ze status=0009 05:17:59 Check angles 05:17:59 SkyScan query 05:18:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:18:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:18:00 Message to Master queued w/err=0: serial=263639 error=0 05:18:05 Received message from Master: op=Filter serial=263640 05:18:05 Color wheel filter change from 0 to 0 05:18:05 FLIGetFilterPos err=0 currentPosition=0 05:18:05 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:05 Filter is already there-color wheel unchanged 05:18:05 Received message from Master: op=Shutter serial=263641 05:18:05 Shutter LASER close 05:18:05 Received message from Camera: op=State serial=263643 05:18:05 GetSingleValue result=40 Value=cccccccc 05:18:05 SkyScan query 05:18:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:18:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:06 Parameters OK 05:18:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:06 Set A/D data flow result=40 05:18:06 Set A/D channel type result=40 05:18:06 Set A/D encoding result=40 05:18:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:06 Set channel filter=0.000000e+000 result=40 05:18:06 Config A/D Result=40 05:18:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:06 Get A/D filter: -9.255963e+061 result=40 05:18:06 Get A/D value=-858993460 result=40 05:18:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:06 Parameters OK 05:18:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:06 Set A/D data flow result=40 05:18:06 Set A/D channel type result=40 05:18:06 Set A/D encoding result=40 05:18:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:06 Set channel filter=0.000000e+000 result=40 05:18:06 Config A/D Result=40 05:18:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:06 Get A/D filter: -9.255963e+061 result=40 05:18:06 Get A/D value=-858993460 result=40 05:18:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:06 Aux= 05:18:06 Message to Camera, serial 263643 queued 05:18:43 Received message from Master: op=PointingHead serial=263656 05:18:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:18:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:18:43 Point started: ret=0 05:18:43 point_skyscan result=0 05:18:44 Check angles 05:18:44 SkyScan query 05:18:44 SkyScan query done: ret=0 az=40.995<-2733 ze=21.945<-10537 Statuses=0008 0009 05:18:44 Msec=0 True Az=40.995 Ze=21.945 Az status=0008 Ze status=0009 05:18:45 Check angles 05:18:45 SkyScan query 05:18:45 SkyScan query done: ret=0 az=40.995<-2733 ze=0.555<-11963 Statuses=0008 0009 05:18:45 Msec=750 True Az=40.995 Ze=0.555 Az status=0008 Ze status=0009 05:18:45 Check angles 05:18:45 SkyScan query 05:18:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.865<-13391 Statuses=0008 0009 05:18:46 Msec=1500 True Az=40.995 Ze=-20.865 Az status=0008 Ze status=0009 05:18:46 Check angles 05:18:46 SkyScan query 05:18:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 05:18:47 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 05:18:47 Check angles 05:18:47 SkyScan query 05:18:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:18:47 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:18:47 Message to Master queued w/err=0: serial=263656 error=0 05:18:52 Received message from Master: op=Filter serial=263657 05:18:52 Color wheel filter change from 0 to 0 05:18:52 FLIGetFilterPos err=0 currentPosition=0 05:18:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:52 Filter is already there-color wheel unchanged 05:18:53 Received message from Master: op=Shutter serial=263658 05:18:53 Shutter LASER close 05:18:53 Received message from Camera: op=State serial=263660 05:18:53 GetSingleValue result=40 Value=cccccccc 05:18:53 SkyScan query 05:18:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:18:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:53 Parameters OK 05:18:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:53 Set A/D data flow result=40 05:18:53 Set A/D channel type result=40 05:18:53 Set A/D encoding result=40 05:18:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:53 Set channel filter=0.000000e+000 result=40 05:18:53 Config A/D Result=40 05:18:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:53 Get A/D filter: -9.255963e+061 result=40 05:18:53 Get A/D value=-858993460 result=40 05:18:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:53 Parameters OK 05:18:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:53 Set A/D data flow result=40 05:18:53 Set A/D channel type result=40 05:18:53 Set A/D encoding result=40 05:18:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:53 Set channel filter=0.000000e+000 result=40 05:18:53 Config A/D Result=40 05:18:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:53 Get A/D filter: -9.255963e+061 result=40 05:18:53 Get A/D value=-858993460 result=40 05:18:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:53 Aux= 05:18:53 Message to Camera, serial 263660 queued 05:19:30 Received message from Master: op=PointingHead serial=263673 05:19:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:19:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:19:30 Point started: ret=0 05:19:30 point_skyscan result=0 05:19:31 Check angles 05:19:31 SkyScan query 05:19:32 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.235<-16549 Statuses=0009 0009 05:19:32 Msec=0 True Az=63.915 Ze=-68.235 Az status=0009 Ze status=0009 05:19:32 Check angles 05:19:32 SkyScan query 05:19:33 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.655<-17977 Statuses=0009 0009 05:19:33 Msec=750 True Az=81.735 Ze=-89.655 Az status=0009 Ze status=0009 05:19:33 Check angles 05:19:33 SkyScan query 05:19:33 SkyScan query done: ret=0 az=99.255<-6617 ze=-110.595<-19373 Statuses=0009 0009 05:19:33 Msec=1500 True Az=99.255 Ze=-110.595 Az status=0009 Ze status=0009 05:19:33 Check angles 05:19:33 SkyScan query 05:19:34 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.52<-20768 Statuses=0009 0009 05:19:34 Msec=2250 True Az=116.745 Ze=-131.52 Az status=0009 Ze status=0009 05:19:34 Check angles 05:19:34 SkyScan query 05:19:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 05:19:35 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 05:19:35 Check angles 05:19:35 SkyScan query 05:19:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 05:19:36 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 05:19:36 Message to Master queued w/err=0: serial=263673 error=0 05:19:41 Received message from Master: op=Filter serial=263674 05:19:41 Color wheel filter change from 0 to 0 05:19:41 FLIGetFilterPos err=0 currentPosition=0 05:19:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:41 Filter is already there-color wheel unchanged 05:19:41 Received message from Master: op=Shutter serial=263675 05:19:41 Shutter LASER close 05:19:41 Received message from Camera: op=State serial=263677 05:19:41 GetSingleValue result=40 Value=cccccccc 05:19:41 SkyScan query 05:19:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:19:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:41 Parameters OK 05:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:41 Set A/D data flow result=40 05:19:41 Set A/D channel type result=40 05:19:41 Set A/D encoding result=40 05:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:41 Set channel filter=0.000000e+000 result=40 05:19:41 Config A/D Result=40 05:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:41 Get A/D filter: -9.255963e+061 result=40 05:19:41 Get A/D value=-858993460 result=40 05:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:41 Parameters OK 05:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:41 Set A/D data flow result=40 05:19:41 Set A/D channel type result=40 05:19:41 Set A/D encoding result=40 05:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:41 Set channel filter=0.000000e+000 result=40 05:19:41 Config A/D Result=40 05:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:41 Get A/D filter: -9.255963e+061 result=40 05:19:41 Get A/D value=-858993460 result=40 05:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:41 Aux= 05:19:41 Message to Camera, serial 263677 queued 05:20:18 Received message from Master: op=PointingHead serial=263690 05:20:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:20:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:20:19 Point started: ret=0 05:20:19 point_skyscan result=0 05:20:19 Check angles 05:20:19 SkyScan query 05:20:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 05:20:20 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 05:20:20 Check angles 05:20:20 SkyScan query 05:20:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:20:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:20:21 Message to Master queued w/err=0: serial=263690 error=0 05:20:26 Received message from Master: op=Filter serial=263691 05:20:26 Color wheel filter change from 0 to 0 05:20:26 FLIGetFilterPos err=0 currentPosition=0 05:20:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:26 Filter is already there-color wheel unchanged 05:20:26 Received message from Master: op=Shutter serial=263692 05:20:26 Shutter LASER open 05:20:26 Received message from Camera: op=State serial=263694 05:20:26 GetSingleValue result=40 Value=cccccccc 05:20:26 SkyScan query 05:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:20:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:27 Parameters OK 05:20:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:27 Set A/D data flow result=40 05:20:27 Set A/D channel type result=40 05:20:27 Set A/D encoding result=40 05:20:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:27 Set channel filter=0.000000e+000 result=40 05:20:27 Config A/D Result=40 05:20:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:27 Get A/D filter: -9.255963e+061 result=40 05:20:27 Get A/D value=-858993460 result=40 05:20:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:27 Parameters OK 05:20:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:27 Set A/D data flow result=40 05:20:27 Set A/D channel type result=40 05:20:27 Set A/D encoding result=40 05:20:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:27 Set channel filter=0.000000e+000 result=40 05:20:27 Config A/D Result=40 05:20:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:27 Get A/D filter: -9.255963e+061 result=40 05:20:27 Get A/D value=-858993460 result=40 05:20:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:27 Aux= 05:20:27 Message to Camera, serial 263694 queued 05:20:35 Received message from Master: op=Shutter serial=263704 05:20:35 Shutter LASER close 05:20:36 Received message from Master: op=PointingHead serial=263708 05:20:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:20:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:20:36 Point started: ret=0 05:20:36 point_skyscan result=0 05:20:37 Check angles 05:20:37 SkyScan query 05:20:37 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.235<-21549 Statuses=0009 0009 05:20:37 Msec=0 True Az=135.96 Ze=-143.235 Az status=0009 Ze status=0009 05:20:38 Check angles 05:20:38 SkyScan query 05:20:38 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.265<-20151 Statuses=0009 0009 05:20:38 Msec=750 True Az=153.495 Ze=-122.265 Az status=0009 Ze status=0009 05:20:38 Check angles 05:20:38 SkyScan query 05:20:39 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.845<-18723 Statuses=0009 0009 05:20:39 Msec=1500 True Az=171.36 Ze=-100.845 Az status=0009 Ze status=0009 05:20:39 Check angles 05:20:39 SkyScan query 05:20:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.47<-17298 Statuses=0008 0009 05:20:40 Msec=2250 True Az=176.01 Ze=-79.47 Az status=0008 Ze status=0009 05:20:40 Check angles 05:20:40 SkyScan query 05:20:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.5<-15900 Statuses=0008 0009 05:20:40 Msec=3000 True Az=176.01 Ze=-58.5 Az status=0008 Ze status=0009 05:20:41 Check angles 05:20:41 SkyScan query 05:20:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 05:20:41 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 05:20:41 Message to Master queued w/err=0: serial=263708 error=0 05:20:46 Received message from Master: op=Filter serial=263709 05:20:46 Color wheel filter change from 0 to 0 05:20:46 FLIGetFilterPos err=0 currentPosition=0 05:20:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:46 Filter is already there-color wheel unchanged 05:20:46 Received message from Master: op=Shutter serial=263710 05:20:46 Shutter LASER close 05:20:47 Received message from Camera: op=State serial=263712 05:20:47 GetSingleValue result=40 Value=cccccccc 05:20:47 SkyScan query 05:20:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:20:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:47 Parameters OK 05:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:47 Set A/D data flow result=40 05:20:47 Set A/D channel type result=40 05:20:47 Set A/D encoding result=40 05:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:47 Set channel filter=0.000000e+000 result=40 05:20:47 Config A/D Result=40 05:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:47 Get A/D filter: -9.255963e+061 result=40 05:20:47 Get A/D value=-858993460 result=40 05:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:47 Parameters OK 05:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:47 Set A/D data flow result=40 05:20:47 Set A/D channel type result=40 05:20:47 Set A/D encoding result=40 05:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:47 Set channel filter=0.000000e+000 result=40 05:20:47 Config A/D Result=40 05:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:47 Get A/D filter: -9.255963e+061 result=40 05:20:47 Get A/D value=-858993460 result=40 05:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:47 Aux= 05:20:47 Message to Camera, serial 263712 queued 05:21:24 Received message from Master: op=PointingHead serial=263725 05:21:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:21:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:21:24 Point started: ret=0 05:21:24 point_skyscan result=0 05:21:25 Check angles 05:21:25 SkyScan query 05:21:26 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.135<-13409 Statuses=0009 0009 05:21:26 Msec=0 True Az=152.565 Ze=-21.135 Az status=0009 Ze status=0009 05:21:26 Check angles 05:21:26 SkyScan query 05:21:26 SkyScan query done: ret=0 az=134.595<-8973 ze=0.21<-11986 Statuses=0009 0009 05:21:26 Msec=750 True Az=134.595 Ze=0.21 Az status=0009 Ze status=0009 05:21:27 Check angles 05:21:27 SkyScan query 05:21:27 SkyScan query done: ret=0 az=117.225<-7815 ze=21.21<-10586 Statuses=0009 0009 05:21:27 Msec=1500 True Az=117.225 Ze=21.21 Az status=0009 Ze status=0009 05:21:27 Check angles 05:21:27 SkyScan query 05:21:28 SkyScan query done: ret=0 az=99.36<-6624 ze=42.54<-9164 Statuses=0009 0009 05:21:28 Msec=2250 True Az=99.36 Ze=42.54 Az status=0009 Ze status=0009 05:21:28 Check angles 05:21:28 SkyScan query 05:21:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 05:21:29 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 05:21:29 Check angles 05:21:29 SkyScan query 05:21:29 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 05:21:29 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 05:21:29 Message to Master queued w/err=0: serial=263725 error=0 05:21:34 Received message from Master: op=Filter serial=263726 05:21:34 Color wheel filter change from 0 to 0 05:21:34 FLIGetFilterPos err=0 currentPosition=0 05:21:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:34 Filter is already there-color wheel unchanged 05:21:35 Received message from Master: op=Shutter serial=263727 05:21:35 Shutter LASER close 05:21:35 Received message from Camera: op=State serial=263729 05:21:35 GetSingleValue result=40 Value=cccccccc 05:21:35 SkyScan query 05:21:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:21:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:35 Parameters OK 05:21:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:35 Set A/D data flow result=40 05:21:35 Set A/D channel type result=40 05:21:35 Set A/D encoding result=40 05:21:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:35 Set channel filter=0.000000e+000 result=40 05:21:35 Config A/D Result=40 05:21:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:35 Get A/D filter: -9.255963e+061 result=40 05:21:35 Get A/D value=-858993460 result=40 05:21:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:35 Parameters OK 05:21:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:35 Set A/D data flow result=40 05:21:35 Set A/D channel type result=40 05:21:35 Set A/D encoding result=40 05:21:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:35 Set channel filter=0.000000e+000 result=40 05:21:35 Config A/D Result=40 05:21:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:35 Get A/D filter: -9.255963e+061 result=40 05:21:35 Get A/D value=-858993460 result=40 05:21:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:35 Aux= 05:21:35 Message to Camera, serial 263729 queued 05:22:12 Received message from Master: op=PointingHead serial=263742 05:22:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:22:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:22:13 Point started: ret=0 05:22:13 point_skyscan result=0 05:22:13 Check angles 05:22:13 SkyScan query 05:22:14 SkyScan query done: ret=0 az=85.995<-5733 ze=21.33<-10578 Statuses=0008 0009 05:22:14 Msec=0 True Az=85.995 Ze=21.33 Az status=0008 Ze status=0009 05:22:14 Check angles 05:22:14 SkyScan query 05:22:15 SkyScan query done: ret=0 az=86.01<-5734 ze=0.405<-11973 Statuses=0008 0009 05:22:15 Msec=750 True Az=86.01 Ze=0.405 Az status=0008 Ze status=0009 05:22:15 Check angles 05:22:15 SkyScan query 05:22:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.565<-13371 Statuses=0008 0009 05:22:15 Msec=1500 True Az=85.995 Ze=-20.565 Az status=0008 Ze status=0009 05:22:16 Check angles 05:22:16 SkyScan query 05:22:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.46<-14764 Statuses=0008 0009 05:22:16 Msec=2250 True Az=85.995 Ze=-41.46 Az status=0008 Ze status=0009 05:22:16 Check angles 05:22:16 SkyScan query 05:22:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:22:17 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:22:17 Message to Master queued w/err=0: serial=263742 error=0 05:22:22 Received message from Master: op=Filter serial=263743 05:22:22 Color wheel filter change from 0 to 0 05:22:22 FLIGetFilterPos err=0 currentPosition=0 05:22:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:22 Filter is already there-color wheel unchanged 05:22:22 Received message from Master: op=Shutter serial=263744 05:22:22 Shutter LASER close 05:22:22 Received message from Camera: op=State serial=263746 05:22:22 GetSingleValue result=40 Value=cccccccc 05:22:22 SkyScan query 05:22:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:22:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:23 Parameters OK 05:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:23 Set A/D data flow result=40 05:22:23 Set A/D channel type result=40 05:22:23 Set A/D encoding result=40 05:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:23 Set channel filter=0.000000e+000 result=40 05:22:23 Config A/D Result=40 05:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:23 Get A/D filter: -9.255963e+061 result=40 05:22:23 Get A/D value=-858993460 result=40 05:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:23 Parameters OK 05:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:23 Set A/D data flow result=40 05:22:23 Set A/D channel type result=40 05:22:23 Set A/D encoding result=40 05:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:23 Set channel filter=0.000000e+000 result=40 05:22:23 Config A/D Result=40 05:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:23 Get A/D filter: -9.255963e+061 result=40 05:22:23 Get A/D value=-858993460 result=40 05:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:23 Aux= 05:22:23 Message to Camera, serial 263746 queued 05:23:00 Received message from Master: op=PointingHead serial=263759 05:23:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:23:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:23:00 Point started: ret=0 05:23:00 point_skyscan result=0 05:23:01 Check angles 05:23:01 SkyScan query 05:23:01 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.285<-17419 Statuses=0009 0009 05:23:01 Msec=0 True Az=108.96 Ze=-81.285 Az status=0009 Ze status=0009 05:23:01 Check angles 05:23:01 SkyScan query 05:23:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 05:23:02 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 05:23:02 Check angles 05:23:02 SkyScan query 05:23:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.18<-20212 Statuses=0008 0009 05:23:03 Msec=1500 True Az=112.995 Ze=-123.18 Az status=0008 Ze status=0009 05:23:03 Check angles 05:23:03 SkyScan query 05:23:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.135<-21609 Statuses=0008 0009 05:23:03 Msec=2250 True Az=112.995 Ze=-144.135 Az status=0008 Ze status=0009 05:23:04 Check angles 05:23:04 SkyScan query 05:23:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.51<-23034 Statuses=0008 0009 05:23:04 Msec=3000 True Az=112.995 Ze=-165.51 Az status=0008 Ze status=0009 05:23:04 Check angles 05:23:04 SkyScan query 05:23:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:23:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:23:05 Message to Master queued w/err=0: serial=263759 error=0 05:23:10 Received message from Master: op=Filter serial=263760 05:23:10 Color wheel filter change from 0 to 0 05:23:10 FLIGetFilterPos err=0 currentPosition=0 05:23:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:10 Filter is already there-color wheel unchanged 05:23:10 Received message from Master: op=Shutter serial=263761 05:23:10 Shutter LASER open 05:23:10 Received message from Camera: op=State serial=263763 05:23:10 GetSingleValue result=40 Value=cccccccc 05:23:10 SkyScan query 05:23:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:23:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:11 Parameters OK 05:23:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:11 Set A/D data flow result=40 05:23:11 Set A/D channel type result=40 05:23:11 Set A/D encoding result=40 05:23:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:11 Set channel filter=0.000000e+000 result=40 05:23:11 Config A/D Result=40 05:23:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:11 Get A/D filter: -9.255963e+061 result=40 05:23:11 Get A/D value=-858993460 result=40 05:23:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:11 Parameters OK 05:23:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:11 Set A/D data flow result=40 05:23:11 Set A/D channel type result=40 05:23:11 Set A/D encoding result=40 05:23:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:11 Set channel filter=0.000000e+000 result=40 05:23:11 Config A/D Result=40 05:23:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:11 Get A/D filter: -9.255963e+061 result=40 05:23:11 Get A/D value=-858993460 result=40 05:23:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:11 Aux= 05:23:11 Message to Camera, serial 263763 queued 05:23:19 Received message from Master: op=Shutter serial=263773 05:23:19 Shutter LASER close 05:23:20 Received message from Master: op=PointingHead serial=263777 05:23:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:23:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:23:20 Point started: ret=0 05:23:20 point_skyscan result=0 05:23:21 Check angles 05:23:21 SkyScan query 05:23:21 SkyScan query done: ret=0 az=89.865<-5991 ze=157.23<-1518 Statuses=0009 0009 05:23:21 Msec=0 True Az=89.865 Ze=157.23 Az status=0009 Ze status=0009 05:23:22 Check angles 05:23:22 SkyScan query 05:23:22 SkyScan query done: ret=0 az=72.075<-4805 ze=135.84<-2944 Statuses=0009 0009 05:23:22 Msec=750 True Az=72.075 Ze=135.84 Az status=0009 Ze status=0009 05:23:22 Check angles 05:23:22 SkyScan query 05:23:23 SkyScan query done: ret=0 az=54.24<-3616 ze=114.375<-4375 Statuses=0009 0009 05:23:23 Msec=1500 True Az=54.24 Ze=114.375 Az status=0009 Ze status=0009 05:23:23 Check angles 05:23:23 SkyScan query 05:23:24 SkyScan query done: ret=0 az=40.965<-2731 ze=93.45<-5770 Statuses=0009 0009 05:23:24 Msec=2250 True Az=40.965 Ze=93.45 Az status=0009 Ze status=0009 05:23:24 Check angles 05:23:24 SkyScan query 05:23:24 SkyScan query done: ret=0 az=40.995<-2733 ze=72.48<-7168 Statuses=0008 0009 05:23:24 Msec=3000 True Az=40.995 Ze=72.48 Az status=0008 Ze status=0009 05:23:25 Check angles 05:23:25 SkyScan query 05:23:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 05:23:25 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 05:23:25 Check angles 05:23:25 SkyScan query 05:23:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:23:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:23:26 Message to Master queued w/err=0: serial=263777 error=0 05:23:31 Received message from Master: op=Filter serial=263778 05:23:31 Color wheel filter change from 0 to 0 05:23:31 FLIGetFilterPos err=0 currentPosition=0 05:23:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:31 Filter is already there-color wheel unchanged 05:23:31 Received message from Master: op=Shutter serial=263779 05:23:31 Shutter LASER close 05:23:31 Received message from Camera: op=State serial=263781 05:23:31 GetSingleValue result=40 Value=cccccccc 05:23:31 SkyScan query 05:23:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:23:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:32 Parameters OK 05:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:32 Set A/D data flow result=40 05:23:32 Set A/D channel type result=40 05:23:32 Set A/D encoding result=40 05:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:32 Set channel filter=0.000000e+000 result=40 05:23:32 Config A/D Result=40 05:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:32 Get A/D filter: -9.255963e+061 result=40 05:23:32 Get A/D value=-858993460 result=40 05:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:32 Parameters OK 05:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:32 Set A/D data flow result=40 05:23:32 Set A/D channel type result=40 05:23:32 Set A/D encoding result=40 05:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:32 Set channel filter=0.000000e+000 result=40 05:23:32 Config A/D Result=40 05:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:32 Get A/D filter: -9.255963e+061 result=40 05:23:32 Get A/D value=-858993460 result=40 05:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:32 Aux= 05:23:32 Message to Camera, serial 263781 queued 05:24:08 Received message from Master: op=PointingHead serial=263793 05:24:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:24:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:24:08 Point started: ret=0 05:24:08 point_skyscan result=0 05:24:09 Check angles 05:24:09 SkyScan query 05:24:10 SkyScan query done: ret=0 az=40.995<-2733 ze=21.66<-10556 Statuses=0008 0009 05:24:10 Msec=0 True Az=40.995 Ze=21.66 Az status=0008 Ze status=0009 05:24:10 Check angles 05:24:10 SkyScan query 05:24:10 SkyScan query done: ret=0 az=40.995<-2733 ze=0.18<-11988 Statuses=0008 0009 05:24:10 Msec=750 True Az=40.995 Ze=0.18 Az status=0008 Ze status=0009 05:24:10 Check angles 05:24:10 SkyScan query 05:24:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.195<-13413 Statuses=0008 0009 05:24:11 Msec=1500 True Az=40.995 Ze=-21.195 Az status=0008 Ze status=0009 05:24:11 Check angles 05:24:11 SkyScan query 05:24:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 05:24:12 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 05:24:12 Check angles 05:24:12 SkyScan query 05:24:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:24:13 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:24:13 Message to Master queued w/err=0: serial=263793 error=0 05:24:18 Received message from Master: op=Filter serial=263794 05:24:18 Color wheel filter change from 0 to 0 05:24:18 FLIGetFilterPos err=0 currentPosition=0 05:24:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:18 Filter is already there-color wheel unchanged 05:24:18 Received message from Master: op=Shutter serial=263795 05:24:18 Shutter LASER close 05:24:18 Received message from Camera: op=State serial=263797 05:24:18 GetSingleValue result=40 Value=cccccccc 05:24:18 SkyScan query 05:24:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:24:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:18 Parameters OK 05:24:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:18 Set A/D data flow result=40 05:24:18 Set A/D channel type result=40 05:24:18 Set A/D encoding result=40 05:24:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:18 Set channel filter=0.000000e+000 result=40 05:24:18 Config A/D Result=40 05:24:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:18 Get A/D filter: -9.255963e+061 result=40 05:24:18 Get A/D value=-858993460 result=40 05:24:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:18 Parameters OK 05:24:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:18 Set A/D data flow result=40 05:24:18 Set A/D channel type result=40 05:24:18 Set A/D encoding result=40 05:24:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:18 Set channel filter=0.000000e+000 result=40 05:24:18 Config A/D Result=40 05:24:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:18 Get A/D filter: -9.255963e+061 result=40 05:24:18 Get A/D value=-858993460 result=40 05:24:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:18 Aux= 05:24:18 Message to Camera, serial 263797 queued 05:24:55 Received message from Master: op=PointingHead serial=263810 05:24:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:24:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:24:56 Point started: ret=0 05:24:56 point_skyscan result=0 05:24:56 Check angles 05:24:56 SkyScan query 05:24:57 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.46<-16564 Statuses=0009 0009 05:24:57 Msec=0 True Az=64.245 Ze=-68.46 Az status=0009 Ze status=0009 05:24:57 Check angles 05:24:57 SkyScan query 05:24:58 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.46<-17964 Statuses=0009 0009 05:24:58 Msec=750 True Az=81.54 Ze=-89.46 Az status=0009 Ze status=0009 05:24:58 Check angles 05:24:58 SkyScan query 05:24:58 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.4<-19360 Statuses=0009 0009 05:24:58 Msec=1500 True Az=99.12 Ze=-110.4 Az status=0009 Ze status=0009 05:24:59 Check angles 05:24:59 SkyScan query 05:24:59 SkyScan query done: ret=0 az=116.565<-7771 ze=-131.325<-20755 Statuses=0009 0009 05:24:59 Msec=2250 True Az=116.565 Ze=-131.325 Az status=0009 Ze status=0009 05:24:59 Check angles 05:24:59 SkyScan query 05:25:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 05:25:00 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 05:25:00 Check angles 05:25:00 SkyScan query 05:25:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:25:01 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:25:01 Message to Master queued w/err=0: serial=263810 error=0 05:25:06 Received message from Master: op=Filter serial=263811 05:25:06 Color wheel filter change from 0 to 0 05:25:06 FLIGetFilterPos err=0 currentPosition=0 05:25:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:06 Filter is already there-color wheel unchanged 05:25:06 Received message from Master: op=Shutter serial=263812 05:25:06 Shutter LASER close 05:25:06 Received message from Camera: op=State serial=263814 05:25:06 GetSingleValue result=40 Value=cccccccc 05:25:06 SkyScan query 05:25:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:25:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:06 Parameters OK 05:25:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:06 Set A/D data flow result=40 05:25:06 Set A/D channel type result=40 05:25:06 Set A/D encoding result=40 05:25:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:06 Set channel filter=0.000000e+000 result=40 05:25:06 Config A/D Result=40 05:25:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:06 Get A/D filter: -9.255963e+061 result=40 05:25:06 Get A/D value=-858993460 result=40 05:25:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:06 Parameters OK 05:25:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:06 Set A/D data flow result=40 05:25:06 Set A/D channel type result=40 05:25:06 Set A/D encoding result=40 05:25:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:06 Set channel filter=0.000000e+000 result=40 05:25:06 Config A/D Result=40 05:25:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:06 Get A/D filter: -9.255963e+061 result=40 05:25:06 Get A/D value=-858993460 result=40 05:25:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:06 Aux= 05:25:06 Message to Camera, serial 263814 queued 05:25:42 Received message from Master: op=PointingHead serial=263826 05:25:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:25:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:25:43 Point started: ret=0 05:25:43 point_skyscan result=0 05:25:43 Check angles 05:25:43 SkyScan query 05:25:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 05:25:44 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 05:25:44 Check angles 05:25:44 SkyScan query 05:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:25:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:25:45 Message to Master queued w/err=0: serial=263826 error=0 05:25:50 Received message from Master: op=Filter serial=263827 05:25:50 Color wheel filter change from 0 to 0 05:25:50 FLIGetFilterPos err=0 currentPosition=0 05:25:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:50 Filter is already there-color wheel unchanged 05:25:50 Received message from Master: op=Shutter serial=263828 05:25:50 Shutter LASER open 05:25:50 Received message from Camera: op=State serial=263830 05:25:50 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-19 05:25:50] 05:25:50 SkyScan query 05:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:25:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:51 Parameters OK 05:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:51 Set A/D data flow result=40 05:25:51 Set A/D channel type result=40 05:25:51 Set A/D encoding result=40 05:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:51 Set channel filter=0.000000e+000 result=40 05:25:51 Config A/D Result=40 05:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:51 Get A/D filter: -9.255963e+061 result=40 05:25:51 Get A/D value=-858993460 result=40 05:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:51 Parameters OK 05:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:51 Set A/D data flow result=40 05:25:51 Set A/D channel type result=40 05:25:51 Set A/D encoding result=40 05:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:51 Set channel filter=0.000000e+000 result=40 05:25:51 Config A/D Result=40 05:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:51 Get A/D filter: -9.255963e+061 result=40 05:25:51 Get A/D value=-858993460 result=40 05:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:51 Aux= 05:25:51 Message to Camera, serial 263830 queued 05:25:59 Received message from Master: op=Shutter serial=263840 05:25:59 Shutter LASER close 05:26:00 Received message from Master: op=PointingHead serial=263844 05:26:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:26:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:26:00 Point started: ret=0 05:26:00 point_skyscan result=0 05:26:01 Check angles 05:26:01 SkyScan query 05:26:01 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.16<-21544 Statuses=0009 0009 05:26:01 Msec=0 True Az=136.095 Ze=-143.16 Az status=0009 Ze status=0009 05:26:02 Check angles 05:26:02 SkyScan query 05:26:02 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.16<-20144 Statuses=0009 0009 05:26:02 Msec=750 True Az=153.495 Ze=-122.16 Az status=0009 Ze status=0009 05:26:02 Check angles 05:26:02 SkyScan query 05:26:03 SkyScan query done: ret=0 az=171<-11400 ze=-101.265<-18751 Statuses=0009 0009 05:26:03 Msec=1500 True Az=171 Ze=-101.265 Az status=0009 Ze status=0009 05:26:03 Check angles 05:26:03 SkyScan query 05:26:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.325<-17355 Statuses=0008 0009 05:26:04 Msec=2250 True Az=176.01 Ze=-80.325 Az status=0008 Ze status=0009 05:26:04 Check angles 05:26:04 SkyScan query 05:26:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.31<-15954 Statuses=0008 0009 05:26:04 Msec=3000 True Az=175.995 Ze=-59.31 Az status=0008 Ze status=0009 05:26:05 Check angles 05:26:05 SkyScan query 05:26:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 05:26:05 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 05:26:05 Message to Master queued w/err=0: serial=263844 error=0 05:26:10 Received message from Master: op=Filter serial=263845 05:26:10 Color wheel filter change from 0 to 0 05:26:10 FLIGetFilterPos err=0 currentPosition=0 05:26:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:10 Filter is already there-color wheel unchanged 05:26:10 Received message from Master: op=Shutter serial=263846 05:26:10 Shutter LASER close 05:26:10 Received message from Camera: op=State serial=263848 05:26:10 GetSingleValue result=40 Value=cccccccc 05:26:10 SkyScan query 05:26:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:26:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:11 Parameters OK 05:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:11 Set A/D data flow result=40 05:26:11 Set A/D channel type result=40 05:26:11 Set A/D encoding result=40 05:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:11 Set channel filter=0.000000e+000 result=40 05:26:11 Config A/D Result=40 05:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:11 Get A/D filter: -9.255963e+061 result=40 05:26:11 Get A/D value=-858993460 result=40 05:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:11 Parameters OK 05:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:11 Set A/D data flow result=40 05:26:11 Set A/D channel type result=40 05:26:11 Set A/D encoding result=40 05:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:11 Set channel filter=0.000000e+000 result=40 05:26:11 Config A/D Result=40 05:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:11 Get A/D filter: -9.255963e+061 result=40 05:26:11 Get A/D value=-858993460 result=40 05:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:11 Aux= 05:26:11 Message to Camera, serial 263848 queued 05:26:48 Received message from Master: op=PointingHead serial=263861 05:26:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:26:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:26:48 Point started: ret=0 05:26:48 point_skyscan result=0 05:26:49 Check angles 05:26:49 SkyScan query 05:26:50 SkyScan query done: ret=0 az=153.165<-10211 ze=-22.02<-13468 Statuses=0009 0009 05:26:50 Msec=0 True Az=153.165 Ze=-22.02 Az status=0009 Ze status=0009 05:26:50 Check angles 05:26:50 SkyScan query 05:26:50 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.57<-12038 Statuses=0009 0009 05:26:50 Msec=750 True Az=135.21 Ze=-0.57 Az status=0009 Ze status=0009 05:26:50 Check angles 05:26:50 SkyScan query 05:26:51 SkyScan query done: ret=0 az=117.51<-7834 ze=20.85<-10610 Statuses=0009 0009 05:26:51 Msec=1500 True Az=117.51 Ze=20.85 Az status=0009 Ze status=0009 05:26:51 Check angles 05:26:51 SkyScan query 05:26:52 SkyScan query done: ret=0 az=100.035<-6669 ze=41.76<-9216 Statuses=0009 0009 05:26:52 Msec=2250 True Az=100.035 Ze=41.76 Az status=0009 Ze status=0009 05:26:52 Check angles 05:26:52 SkyScan query 05:26:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 05:26:53 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 05:26:53 Check angles 05:26:53 SkyScan query 05:26:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:26:53 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:26:53 Message to Master queued w/err=0: serial=263861 error=0 05:26:58 Received message from Master: op=Filter serial=263862 05:26:58 Color wheel filter change from 0 to 0 05:26:58 FLIGetFilterPos err=0 currentPosition=0 05:26:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:58 Filter is already there-color wheel unchanged 05:26:58 Received message from Master: op=Shutter serial=263863 05:26:59 Shutter LASER close 05:26:59 Received message from Camera: op=State serial=263865 05:26:59 GetSingleValue result=40 Value=cccccccc 05:26:59 SkyScan query 05:26:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:59 Parameters OK 05:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:59 Set A/D data flow result=40 05:26:59 Set A/D channel type result=40 05:26:59 Set A/D encoding result=40 05:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:59 Set channel filter=0.000000e+000 result=40 05:26:59 Config A/D Result=40 05:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:59 Get A/D filter: -9.255963e+061 result=40 05:26:59 Get A/D value=-858993460 result=40 05:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:59 Parameters OK 05:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:59 Set A/D data flow result=40 05:26:59 Set A/D channel type result=40 05:26:59 Set A/D encoding result=40 05:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:59 Set channel filter=0.000000e+000 result=40 05:26:59 Config A/D Result=40 05:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:59 Get A/D filter: -9.255963e+061 result=40 05:26:59 Get A/D value=-858993460 result=40 05:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:59 Aux= 05:26:59 Message to Camera, serial 263865 queued 05:27:36 Received message from Master: op=PointingHead serial=263878 05:27:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:27:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:27:36 Point started: ret=0 05:27:36 point_skyscan result=0 05:27:37 Check angles 05:27:37 SkyScan query 05:27:38 SkyScan query done: ret=0 az=85.995<-5733 ze=21.765<-10549 Statuses=0008 0009 05:27:38 Msec=0 True Az=85.995 Ze=21.765 Az status=0008 Ze status=0009 05:27:38 Check angles 05:27:38 SkyScan query 05:27:39 SkyScan query done: ret=0 az=86.01<-5734 ze=0.39<-11974 Statuses=0008 0009 05:27:39 Msec=750 True Az=86.01 Ze=0.39 Az status=0008 Ze status=0009 05:27:39 Check angles 05:27:39 SkyScan query 05:27:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.535<-13369 Statuses=0008 0009 05:27:39 Msec=1500 True Az=85.995 Ze=-20.535 Az status=0008 Ze status=0009 05:27:39 Check angles 05:27:39 SkyScan query 05:27:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.955<-14797 Statuses=0008 0009 05:27:40 Msec=2250 True Az=85.995 Ze=-41.955 Az status=0008 Ze status=0009 05:27:40 Check angles 05:27:40 SkyScan query 05:27:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:27:41 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:27:41 Message to Master queued w/err=0: serial=263878 error=0 05:27:46 Received message from Master: op=Filter serial=263879 05:27:46 Color wheel filter change from 0 to 0 05:27:46 FLIGetFilterPos err=0 currentPosition=0 05:27:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:46 Filter is already there-color wheel unchanged 05:27:46 Received message from Master: op=Shutter serial=263880 05:27:46 Shutter LASER close 05:27:46 Received message from Camera: op=State serial=263882 05:27:46 GetSingleValue result=40 Value=cccccccc 05:27:46 SkyScan query 05:27:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:27:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:47 Parameters OK 05:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:47 Set A/D data flow result=40 05:27:47 Set A/D channel type result=40 05:27:47 Set A/D encoding result=40 05:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:47 Set channel filter=0.000000e+000 result=40 05:27:47 Config A/D Result=40 05:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:47 Get A/D filter: -9.255963e+061 result=40 05:27:47 Get A/D value=-858993460 result=40 05:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:47 Parameters OK 05:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:47 Set A/D data flow result=40 05:27:47 Set A/D channel type result=40 05:27:47 Set A/D encoding result=40 05:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:47 Set channel filter=0.000000e+000 result=40 05:27:47 Config A/D Result=40 05:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:47 Get A/D filter: -9.255963e+061 result=40 05:27:47 Get A/D value=-858993460 result=40 05:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:47 Aux= 05:27:47 Message to Camera, serial 263882 queued 05:28:23 Received message from Master: op=PointingHead serial=263895 05:28:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:28:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:28:24 Point started: ret=0 05:28:24 point_skyscan result=0 05:28:25 Check angles 05:28:25 SkyScan query 05:28:25 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.675<-17445 Statuses=0009 0009 05:28:25 Msec=0 True Az=109.395 Ze=-81.675 Az status=0009 Ze status=0009 05:28:25 Check angles 05:28:25 SkyScan query 05:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 05:28:26 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 05:28:26 Check angles 05:28:26 SkyScan query 05:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.02<-20268 Statuses=0008 0009 05:28:27 Msec=1500 True Az=112.995 Ze=-124.02 Az status=0008 Ze status=0009 05:28:27 Check angles 05:28:27 SkyScan query 05:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.915<-21661 Statuses=0008 0009 05:28:27 Msec=2250 True Az=112.995 Ze=-144.915 Az status=0008 Ze status=0009 05:28:28 Check angles 05:28:28 SkyScan query 05:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.87<-23058 Statuses=0008 0009 05:28:28 Msec=3000 True Az=112.995 Ze=-165.87 Az status=0008 Ze status=0009 05:28:28 Check angles 05:28:28 SkyScan query 05:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:28:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:28:29 Message to Master queued w/err=0: serial=263895 error=0 05:28:34 Received message from Master: op=Filter serial=263896 05:28:34 Color wheel filter change from 0 to 0 05:28:34 FLIGetFilterPos err=0 currentPosition=0 05:28:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:34 Filter is already there-color wheel unchanged 05:28:34 Received message from Master: op=Shutter serial=263897 05:28:34 Shutter LASER open 05:28:34 Received message from Camera: op=State serial=263899 05:28:34 GetSingleValue result=40 Value=cccccccc 05:28:34 SkyScan query 05:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:28:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:35 Parameters OK 05:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:35 Set A/D data flow result=40 05:28:35 Set A/D channel type result=40 05:28:35 Set A/D encoding result=40 05:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:35 Set channel filter=0.000000e+000 result=40 05:28:35 Config A/D Result=40 05:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:35 Get A/D filter: -9.255963e+061 result=40 05:28:35 Get A/D value=-858993460 result=40 05:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:35 Parameters OK 05:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:35 Set A/D data flow result=40 05:28:35 Set A/D channel type result=40 05:28:35 Set A/D encoding result=40 05:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:35 Set channel filter=0.000000e+000 result=40 05:28:35 Config A/D Result=40 05:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:35 Get A/D filter: -9.255963e+061 result=40 05:28:35 Get A/D value=-858993460 result=40 05:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:35 Aux= 05:28:35 Message to Camera, serial 263899 queued 05:28:43 Received message from Master: op=Shutter serial=263909 05:28:43 Shutter LASER close 05:28:44 Received message from Master: op=PointingHead serial=263913 05:28:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:28:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:28:44 Point started: ret=0 05:28:44 point_skyscan result=0 05:28:45 Check angles 05:28:45 SkyScan query 05:28:45 SkyScan query done: ret=0 az=89.625<-5975 ze=157.08<-1528 Statuses=0009 0009 05:28:45 Msec=0 True Az=89.625 Ze=157.08 Az status=0009 Ze status=0009 05:28:46 Check angles 05:28:46 SkyScan query 05:28:46 SkyScan query done: ret=0 az=72.225<-4815 ze=136.14<-2924 Statuses=0009 0009 05:28:46 Msec=750 True Az=72.225 Ze=136.14 Az status=0009 Ze status=0009 05:28:46 Check angles 05:28:46 SkyScan query 05:28:47 SkyScan query done: ret=0 az=54.75<-3650 ze=115.2<-4320 Statuses=0009 0009 05:28:47 Msec=1500 True Az=54.75 Ze=115.2 Az status=0009 Ze status=0009 05:28:47 Check angles 05:28:47 SkyScan query 05:28:48 SkyScan query done: ret=0 az=40.965<-2731 ze=93.78<-5748 Statuses=0009 0009 05:28:48 Msec=2250 True Az=40.965 Ze=93.78 Az status=0009 Ze status=0009 05:28:48 Check angles 05:28:48 SkyScan query 05:28:48 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 05:28:48 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 05:28:49 Check angles 05:28:49 SkyScan query 05:28:49 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 05:28:49 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 05:28:49 Check angles 05:28:49 SkyScan query 05:28:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:28:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:28:50 Message to Master queued w/err=0: serial=263913 error=0 05:28:55 Received message from Master: op=Filter serial=263914 05:28:55 Color wheel filter change from 0 to 0 05:28:55 FLIGetFilterPos err=0 currentPosition=0 05:28:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:55 Filter is already there-color wheel unchanged 05:28:55 Received message from Master: op=Shutter serial=263915 05:28:55 Shutter LASER close 05:28:55 Received message from Camera: op=State serial=263917 05:28:55 GetSingleValue result=40 Value=cccccccc 05:28:55 SkyScan query 05:28:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:28:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:56 Parameters OK 05:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:56 Set A/D data flow result=40 05:28:56 Set A/D channel type result=40 05:28:56 Set A/D encoding result=40 05:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:56 Set channel filter=0.000000e+000 result=40 05:28:56 Config A/D Result=40 05:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:56 Get A/D filter: -9.255963e+061 result=40 05:28:56 Get A/D value=-858993460 result=40 05:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:56 Parameters OK 05:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:56 Set A/D data flow result=40 05:28:56 Set A/D channel type result=40 05:28:56 Set A/D encoding result=40 05:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:56 Set channel filter=0.000000e+000 result=40 05:28:56 Config A/D Result=40 05:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:56 Get A/D filter: -9.255963e+061 result=40 05:28:56 Get A/D value=-858993460 result=40 05:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:56 Aux= 05:28:56 Message to Camera, serial 263917 queued 05:29:33 Received message from Master: op=PointingHead serial=263930 05:29:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:29:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:29:33 Point started: ret=0 05:29:33 point_skyscan result=0 05:29:34 Check angles 05:29:34 SkyScan query 05:29:35 SkyScan query done: ret=0 az=40.995<-2733 ze=21.15<-10590 Statuses=0008 0009 05:29:35 Msec=0 True Az=40.995 Ze=21.15 Az status=0008 Ze status=0009 05:29:35 Check angles 05:29:35 SkyScan query 05:29:35 SkyScan query done: ret=0 az=41.01<-2734 ze=0.15<-11990 Statuses=0008 0009 05:29:35 Msec=750 True Az=41.01 Ze=0.15 Az status=0008 Ze status=0009 05:29:35 Check angles 05:29:35 SkyScan query 05:29:36 SkyScan query done: ret=0 az=41.01<-2734 ze=-20.925<-13395 Statuses=0008 0009 05:29:36 Msec=1500 True Az=41.01 Ze=-20.925 Az status=0008 Ze status=0009 05:29:36 Check angles 05:29:36 SkyScan query 05:29:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 05:29:37 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 05:29:37 Check angles 05:29:37 SkyScan query 05:29:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:29:38 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:29:38 Message to Master queued w/err=0: serial=263930 error=0 05:29:43 Received message from Master: op=Filter serial=263931 05:29:43 Color wheel filter change from 0 to 0 05:29:43 FLIGetFilterPos err=0 currentPosition=0 05:29:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:43 Filter is already there-color wheel unchanged 05:29:43 Received message from Master: op=Shutter serial=263932 05:29:43 Shutter LASER close 05:29:43 Received message from Camera: op=State serial=263934 05:29:43 GetSingleValue result=40 Value=cccccccc 05:29:43 SkyScan query 05:29:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:29:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:43 Parameters OK 05:29:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:43 Set A/D data flow result=40 05:29:43 Set A/D channel type result=40 05:29:43 Set A/D encoding result=40 05:29:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:43 Set channel filter=0.000000e+000 result=40 05:29:43 Config A/D Result=40 05:29:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:43 Get A/D filter: -9.255963e+061 result=40 05:29:43 Get A/D value=-858993460 result=40 05:29:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:43 Parameters OK 05:29:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:43 Set A/D data flow result=40 05:29:43 Set A/D channel type result=40 05:29:43 Set A/D encoding result=40 05:29:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:43 Set channel filter=0.000000e+000 result=40 05:29:43 Config A/D Result=40 05:29:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:43 Get A/D filter: -9.255963e+061 result=40 05:29:43 Get A/D value=-858993460 result=40 05:29:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:43 Aux= 05:29:43 Message to Camera, serial 263934 queued 05:30:20 Received message from Master: op=PointingHead serial=263947 05:30:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:30:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:30:20 Point started: ret=0 05:30:20 point_skyscan result=0 05:30:21 Check angles 05:30:21 SkyScan query 05:30:22 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.385<-16559 Statuses=0009 0009 05:30:22 Msec=0 True Az=64.095 Ze=-68.385 Az status=0009 Ze status=0009 05:30:22 Check angles 05:30:22 SkyScan query 05:30:23 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.4<-17960 Statuses=0009 0009 05:30:23 Msec=750 True Az=81.555 Ze=-89.4 Az status=0009 Ze status=0009 05:30:23 Check angles 05:30:23 SkyScan query 05:30:23 SkyScan query done: ret=0 az=99.015<-6601 ze=-110.325<-19355 Statuses=0009 0009 05:30:23 Msec=1500 True Az=99.015 Ze=-110.325 Az status=0009 Ze status=0009 05:30:23 Check angles 05:30:23 SkyScan query 05:30:24 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.265<-20751 Statuses=0009 0009 05:30:24 Msec=2250 True Az=116.52 Ze=-131.265 Az status=0009 Ze status=0009 05:30:24 Check angles 05:30:24 SkyScan query 05:30:25 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.555<-21437 Statuses=0009 0008 05:30:25 Msec=3000 True Az=130.98 Ze=-141.555 Az status=0009 Ze status=0008 05:30:25 Check angles 05:30:25 SkyScan query 05:30:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 05:30:26 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 05:30:26 Message to Master queued w/err=0: serial=263947 error=0 05:30:31 Received message from Master: op=Filter serial=263948 05:30:31 Color wheel filter change from 0 to 0 05:30:31 FLIGetFilterPos err=0 currentPosition=0 05:30:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:31 Filter is already there-color wheel unchanged 05:30:31 Received message from Master: op=Shutter serial=263949 05:30:31 Shutter LASER close 05:30:31 Received message from Camera: op=State serial=263951 05:30:31 GetSingleValue result=40 Value=cccccccc 05:30:31 SkyScan query 05:30:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:30:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:31 Parameters OK 05:30:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:31 Set A/D data flow result=40 05:30:31 Set A/D channel type result=40 05:30:31 Set A/D encoding result=40 05:30:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:31 Set channel filter=0.000000e+000 result=40 05:30:31 Config A/D Result=40 05:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:31 Get A/D filter: -9.255963e+061 result=40 05:30:31 Get A/D value=-858993460 result=40 05:30:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:31 Parameters OK 05:30:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:31 Set A/D data flow result=40 05:30:31 Set A/D channel type result=40 05:30:31 Set A/D encoding result=40 05:30:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:31 Set channel filter=0.000000e+000 result=40 05:30:31 Config A/D Result=40 05:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:31 Get A/D filter: -9.255963e+061 result=40 05:30:31 Get A/D value=-858993460 result=40 05:30:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:31 Aux= 05:30:31 Message to Camera, serial 263951 queued 05:31:08 Received message from Master: op=PointingHead serial=263964 05:31:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:31:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:31:09 Point started: ret=0 05:31:09 point_skyscan result=0 05:31:09 Check angles 05:31:09 SkyScan query 05:31:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0009 0009 05:31:10 Msec=0 True Az=112.995 Ze=-170.91 Az status=0009 Ze status=0009 05:31:10 Check angles 05:31:10 SkyScan query 05:31:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:31:11 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:31:11 Message to Master queued w/err=0: serial=263964 error=0 05:31:16 Received message from Master: op=Filter serial=263965 05:31:16 Color wheel filter change from 0 to 0 05:31:16 FLIGetFilterPos err=0 currentPosition=0 05:31:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:16 Filter is already there-color wheel unchanged 05:31:16 Received message from Master: op=Shutter serial=263966 05:31:16 Shutter LASER open 05:31:16 Received message from Camera: op=State serial=263968 05:31:16 GetSingleValue result=40 Value=cccccccc 05:31:16 SkyScan query 05:31:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:31:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:17 Parameters OK 05:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:17 Set A/D data flow result=40 05:31:17 Set A/D channel type result=40 05:31:17 Set A/D encoding result=40 05:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:17 Set channel filter=0.000000e+000 result=40 05:31:17 Config A/D Result=40 05:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:17 Get A/D filter: -9.255963e+061 result=40 05:31:17 Get A/D value=-858993460 result=40 05:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:17 Parameters OK 05:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:17 Set A/D data flow result=40 05:31:17 Set A/D channel type result=40 05:31:17 Set A/D encoding result=40 05:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:17 Set channel filter=0.000000e+000 result=40 05:31:17 Config A/D Result=40 05:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:17 Get A/D filter: -9.255963e+061 result=40 05:31:17 Get A/D value=-858993460 result=40 05:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:17 Aux= 05:31:17 Message to Camera, serial 263968 queued 05:31:25 Received message from Master: op=Shutter serial=263978 05:31:25 Shutter LASER close 05:31:26 Received message from Master: op=PointingHead serial=263982 05:31:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:31:26 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:31:26 Point started: ret=0 05:31:26 point_skyscan result=0 05:31:27 Check angles 05:31:27 SkyScan query 05:31:27 SkyScan query done: ret=0 az=136.335<-9089 ze=-142.935<-21529 Statuses=0009 0009 05:31:27 Msec=0 True Az=136.335 Ze=-142.935 Az status=0009 Ze status=0009 05:31:27 Check angles 05:31:27 SkyScan query 05:31:28 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.95<-20130 Statuses=0009 0009 05:31:28 Msec=750 True Az=153.795 Ze=-121.95 Az status=0009 Ze status=0009 05:31:28 Check angles 05:31:28 SkyScan query 05:31:29 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.965<-18731 Statuses=0009 0009 05:31:29 Msec=1500 True Az=171.375 Ze=-100.965 Az status=0009 Ze status=0009 05:31:29 Check angles 05:31:29 SkyScan query 05:31:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.59<-17306 Statuses=0008 0009 05:31:30 Msec=2250 True Az=176.01 Ze=-79.59 Az status=0008 Ze status=0009 05:31:30 Check angles 05:31:30 SkyScan query 05:31:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.605<-15907 Statuses=0008 0009 05:31:30 Msec=3000 True Az=176.01 Ze=-58.605 Az status=0008 Ze status=0009 05:31:30 Check angles 05:31:30 SkyScan query 05:31:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:31:31 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:31:31 Message to Master queued w/err=0: serial=263982 error=0 05:31:36 Received message from Master: op=Filter serial=263983 05:31:36 Color wheel filter change from 0 to 0 05:31:36 FLIGetFilterPos err=0 currentPosition=0 05:31:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:36 Filter is already there-color wheel unchanged 05:31:36 Received message from Master: op=Shutter serial=263984 05:31:36 Shutter LASER close 05:31:36 Received message from Camera: op=State serial=263986 05:31:36 GetSingleValue result=40 Value=cccccccc 05:31:36 SkyScan query 05:31:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:31:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:37 Parameters OK 05:31:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:37 Set A/D data flow result=40 05:31:37 Set A/D channel type result=40 05:31:37 Set A/D encoding result=40 05:31:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:37 Set channel filter=0.000000e+000 result=40 05:31:37 Config A/D Result=40 05:31:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:37 Get A/D filter: -9.255963e+061 result=40 05:31:37 Get A/D value=-858993460 result=40 05:31:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:37 Parameters OK 05:31:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:37 Set A/D data flow result=40 05:31:37 Set A/D channel type result=40 05:31:37 Set A/D encoding result=40 05:31:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:37 Set channel filter=0.000000e+000 result=40 05:31:37 Config A/D Result=40 05:31:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:37 Get A/D filter: -9.255963e+061 result=40 05:31:37 Get A/D value=-858993460 result=40 05:31:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:37 Aux= 05:31:37 Message to Camera, serial 263986 queued 05:32:14 Received message from Master: op=PointingHead serial=263999 05:32:14 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:32:14 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:32:14 Point started: ret=0 05:32:14 point_skyscan result=0 05:32:15 Check angles 05:32:15 SkyScan query 05:32:15 SkyScan query done: ret=0 az=152.7<-10180 ze=-21.3<-13420 Statuses=0009 0009 05:32:15 Msec=0 True Az=152.7 Ze=-21.3 Az status=0009 Ze status=0009 05:32:16 Check angles 05:32:16 SkyScan query 05:32:16 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.375<-12025 Statuses=0009 0009 05:32:16 Msec=750 True Az=135.15 Ze=-0.375 Az status=0009 Ze status=0009 05:32:16 Check angles 05:32:16 SkyScan query 05:32:17 SkyScan query done: ret=0 az=117.63<-7842 ze=20.58<-10628 Statuses=0009 0009 05:32:17 Msec=1500 True Az=117.63 Ze=20.58 Az status=0009 Ze status=0009 05:32:17 Check angles 05:32:17 SkyScan query 05:32:18 SkyScan query done: ret=0 az=100.245<-6683 ze=41.535<-9231 Statuses=0009 0009 05:32:18 Msec=2250 True Az=100.245 Ze=41.535 Az status=0009 Ze status=0009 05:32:18 Check angles 05:32:18 SkyScan query 05:32:18 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:32:18 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:32:19 Check angles 05:32:19 SkyScan query 05:32:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:32:19 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:32:19 Message to Master queued w/err=0: serial=263999 error=0 05:32:24 Received message from Master: op=Filter serial=264000 05:32:24 Color wheel filter change from 0 to 0 05:32:24 FLIGetFilterPos err=0 currentPosition=0 05:32:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:24 Filter is already there-color wheel unchanged 05:32:24 Received message from Master: op=Shutter serial=264001 05:32:24 Shutter LASER close 05:32:24 Received message from Camera: op=State serial=264003 05:32:24 GetSingleValue result=40 Value=cccccccc 05:32:24 SkyScan query 05:32:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:32:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:25 Parameters OK 05:32:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:25 Set A/D data flow result=40 05:32:25 Set A/D channel type result=40 05:32:25 Set A/D encoding result=40 05:32:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:25 Set channel filter=0.000000e+000 result=40 05:32:25 Config A/D Result=40 05:32:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:25 Get A/D filter: -9.255963e+061 result=40 05:32:25 Get A/D value=-858993460 result=40 05:32:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:25 Parameters OK 05:32:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:25 Set A/D data flow result=40 05:32:25 Set A/D channel type result=40 05:32:25 Set A/D encoding result=40 05:32:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:25 Set channel filter=0.000000e+000 result=40 05:32:25 Config A/D Result=40 05:32:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:25 Get A/D filter: -9.255963e+061 result=40 05:32:25 Get A/D value=-858993460 result=40 05:32:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:25 Aux= 05:32:25 Message to Camera, serial 264003 queued 05:33:02 Received message from Master: op=PointingHead serial=264016 05:33:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:33:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:33:02 Point started: ret=0 05:33:02 point_skyscan result=0 05:33:03 Check angles 05:33:03 SkyScan query 05:33:04 SkyScan query done: ret=0 az=85.995<-5733 ze=21.75<-10550 Statuses=0008 0009 05:33:04 Msec=0 True Az=85.995 Ze=21.75 Az status=0008 Ze status=0009 05:33:04 Check angles 05:33:04 SkyScan query 05:33:04 SkyScan query done: ret=0 az=85.995<-5733 ze=0.87<-11942 Statuses=0008 0009 05:33:04 Msec=750 True Az=85.995 Ze=0.87 Az status=0008 Ze status=0009 05:33:05 Check angles 05:33:05 SkyScan query 05:33:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.1<-13340 Statuses=0008 0009 05:33:05 Msec=1500 True Az=85.995 Ze=-20.1 Az status=0008 Ze status=0009 05:33:05 Check angles 05:33:05 SkyScan query 05:33:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.025<-14735 Statuses=0008 0009 05:33:06 Msec=2250 True Az=85.995 Ze=-41.025 Az status=0008 Ze status=0009 05:33:06 Check angles 05:33:06 SkyScan query 05:33:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:33:07 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:33:07 Message to Master queued w/err=0: serial=264016 error=0 05:33:12 Received message from Master: op=Filter serial=264017 05:33:12 Color wheel filter change from 0 to 0 05:33:12 FLIGetFilterPos err=0 currentPosition=0 05:33:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:12 Filter is already there-color wheel unchanged 05:33:12 Received message from Master: op=Shutter serial=264018 05:33:12 Shutter LASER close 05:33:12 Received message from Camera: op=State serial=264020 05:33:12 GetSingleValue result=40 Value=cccccccc 05:33:12 SkyScan query 05:33:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:33:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:12 Parameters OK 05:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:12 Set A/D data flow result=40 05:33:12 Set A/D channel type result=40 05:33:12 Set A/D encoding result=40 05:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:12 Set channel filter=0.000000e+000 result=40 05:33:12 Config A/D Result=40 05:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:12 Get A/D filter: -9.255963e+061 result=40 05:33:12 Get A/D value=-858993460 result=40 05:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:12 Parameters OK 05:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:12 Set A/D data flow result=40 05:33:12 Set A/D channel type result=40 05:33:12 Set A/D encoding result=40 05:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:12 Set channel filter=0.000000e+000 result=40 05:33:12 Config A/D Result=40 05:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:12 Get A/D filter: -9.255963e+061 result=40 05:33:12 Get A/D value=-858993460 result=40 05:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:12 Aux= 05:33:12 Message to Camera, serial 264020 queued 05:33:49 Received message from Master: op=PointingHead serial=264033 05:33:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:33:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:33:50 Point started: ret=0 05:33:50 point_skyscan result=0 05:33:50 Check angles 05:33:50 SkyScan query 05:33:51 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.465<-17431 Statuses=0009 0009 05:33:51 Msec=0 True Az=109.185 Ze=-81.465 Az status=0009 Ze status=0009 05:33:51 Check angles 05:33:51 SkyScan query 05:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.84<-18856 Statuses=0008 0009 05:33:52 Msec=750 True Az=112.995 Ze=-102.84 Az status=0008 Ze status=0009 05:33:52 Check angles 05:33:52 SkyScan query 05:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 05:33:52 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 05:33:53 Check angles 05:33:53 SkyScan query 05:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 05:33:53 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 05:33:53 Check angles 05:33:53 SkyScan query 05:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.675<-23045 Statuses=0008 0009 05:33:54 Msec=3000 True Az=112.995 Ze=-165.675 Az status=0008 Ze status=0009 05:33:54 Check angles 05:33:54 SkyScan query 05:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:33:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:33:55 Message to Master queued w/err=0: serial=264033 error=0 05:34:00 Received message from Master: op=Filter serial=264034 05:34:00 Color wheel filter change from 0 to 0 05:34:00 FLIGetFilterPos err=0 currentPosition=0 05:34:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:00 Filter is already there-color wheel unchanged 05:34:00 Received message from Master: op=Shutter serial=264035 05:34:00 Shutter LASER open 05:34:00 Received message from Camera: op=State serial=264037 05:34:00 GetSingleValue result=40 Value=cccccccc 05:34:00 SkyScan query 05:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:34:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:01 Parameters OK 05:34:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:01 Set A/D data flow result=40 05:34:01 Set A/D channel type result=40 05:34:01 Set A/D encoding result=40 05:34:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:01 Set channel filter=0.000000e+000 result=40 05:34:01 Config A/D Result=40 05:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:01 Get A/D filter: -9.255963e+061 result=40 05:34:01 Get A/D value=-858993460 result=40 05:34:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:01 Parameters OK 05:34:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:01 Set A/D data flow result=40 05:34:01 Set A/D channel type result=40 05:34:01 Set A/D encoding result=40 05:34:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:01 Set channel filter=0.000000e+000 result=40 05:34:01 Config A/D Result=40 05:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:01 Get A/D filter: -9.255963e+061 result=40 05:34:01 Get A/D value=-858993460 result=40 05:34:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:01 Aux= 05:34:01 Message to Camera, serial 264037 queued 05:34:09 Received message from Master: op=Shutter serial=264047 05:34:09 Shutter LASER close 05:34:10 Received message from Master: op=PointingHead serial=264051 05:34:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:34:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:34:10 Point started: ret=0 05:34:10 point_skyscan result=0 05:34:11 Check angles 05:34:11 SkyScan query 05:34:11 SkyScan query done: ret=0 az=89.865<-5991 ze=157.23<-1518 Statuses=0009 0009 05:34:11 Msec=0 True Az=89.865 Ze=157.23 Az status=0009 Ze status=0009 05:34:11 Check angles 05:34:11 SkyScan query 05:34:12 SkyScan query done: ret=0 az=72.45<-4830 ze=136.17<-2922 Statuses=0009 0009 05:34:12 Msec=750 True Az=72.45 Ze=136.17 Az status=0009 Ze status=0009 05:34:12 Check angles 05:34:12 SkyScan query 05:34:13 SkyScan query done: ret=0 az=55.035<-3669 ze=115.35<-4310 Statuses=0009 0009 05:34:13 Msec=1500 True Az=55.035 Ze=115.35 Az status=0009 Ze status=0009 05:34:13 Check angles 05:34:13 SkyScan query 05:34:14 SkyScan query done: ret=0 az=41.01<-2734 ze=94.35<-5710 Statuses=0009 0009 05:34:14 Msec=2250 True Az=41.01 Ze=94.35 Az status=0009 Ze status=0009 05:34:14 Check angles 05:34:14 SkyScan query 05:34:14 SkyScan query done: ret=0 az=40.995<-2733 ze=73.38<-7108 Statuses=0008 0009 05:34:14 Msec=3000 True Az=40.995 Ze=73.38 Az status=0008 Ze status=0009 05:34:14 Check angles 05:34:14 SkyScan query 05:34:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 05:34:15 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 05:34:15 Check angles 05:34:15 SkyScan query 05:34:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:34:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:34:16 Message to Master queued w/err=0: serial=264051 error=0 05:34:21 Received message from Master: op=Filter serial=264052 05:34:21 Color wheel filter change from 0 to 0 05:34:21 FLIGetFilterPos err=0 currentPosition=0 05:34:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:21 Filter is already there-color wheel unchanged 05:34:21 Received message from Master: op=Shutter serial=264053 05:34:21 Shutter LASER close 05:34:21 Received message from Camera: op=State serial=264055 05:34:21 GetSingleValue result=40 Value=cccccccc 05:34:21 SkyScan query 05:34:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:34:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:22 Parameters OK 05:34:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:22 Set A/D data flow result=40 05:34:22 Set A/D channel type result=40 05:34:22 Set A/D encoding result=40 05:34:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:22 Set channel filter=0.000000e+000 result=40 05:34:22 Config A/D Result=40 05:34:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:22 Get A/D filter: -9.255963e+061 result=40 05:34:22 Get A/D value=-858993460 result=40 05:34:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:22 Parameters OK 05:34:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:22 Set A/D data flow result=40 05:34:22 Set A/D channel type result=40 05:34:22 Set A/D encoding result=40 05:34:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:22 Set channel filter=0.000000e+000 result=40 05:34:22 Config A/D Result=40 05:34:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:22 Get A/D filter: -9.255963e+061 result=40 05:34:22 Get A/D value=-858993460 result=40 05:34:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:22 Aux= 05:34:22 Message to Camera, serial 264055 queued 05:34:59 Received message from Master: op=PointingHead serial=264068 05:34:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:34:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:34:59 Point started: ret=0 05:34:59 point_skyscan result=0 05:35:00 Check angles 05:35:00 SkyScan query 05:35:00 SkyScan query done: ret=0 az=40.995<-2733 ze=21.21<-10586 Statuses=0008 0009 05:35:00 Msec=0 True Az=40.995 Ze=21.21 Az status=0008 Ze status=0009 05:35:01 Check angles 05:35:01 SkyScan query 05:35:01 SkyScan query done: ret=0 az=40.995<-2733 ze=0.18<-11988 Statuses=0008 0009 05:35:01 Msec=750 True Az=40.995 Ze=0.18 Az status=0008 Ze status=0009 05:35:01 Check angles 05:35:01 SkyScan query 05:35:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.76<-13384 Statuses=0008 0009 05:35:02 Msec=1500 True Az=40.995 Ze=-20.76 Az status=0008 Ze status=0009 05:35:02 Check angles 05:35:02 SkyScan query 05:35:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 05:35:03 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 05:35:03 Check angles 05:35:03 SkyScan query 05:35:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:35:03 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:35:03 Message to Master queued w/err=0: serial=264068 error=0 05:35:08 Received message from Master: op=Filter serial=264069 05:35:08 Color wheel filter change from 0 to 0 05:35:08 FLIGetFilterPos err=0 currentPosition=0 05:35:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:08 Filter is already there-color wheel unchanged 05:35:09 Received message from Master: op=Shutter serial=264070 05:35:09 Shutter LASER close 05:35:09 Received message from Camera: op=State serial=264072 05:35:09 GetSingleValue result=40 Value=cccccccc 05:35:09 SkyScan query 05:35:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:35:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:09 Parameters OK 05:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:09 Set A/D data flow result=40 05:35:09 Set A/D channel type result=40 05:35:09 Set A/D encoding result=40 05:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:09 Set channel filter=0.000000e+000 result=40 05:35:09 Config A/D Result=40 05:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:09 Get A/D filter: -9.255963e+061 result=40 05:35:09 Get A/D value=-858993460 result=40 05:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:09 Parameters OK 05:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:09 Set A/D data flow result=40 05:35:09 Set A/D channel type result=40 05:35:09 Set A/D encoding result=40 [UTC 2018-12-19 05:35:09] 05:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:09 Set channel filter=0.000000e+000 result=40 05:35:09 Config A/D Result=40 05:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:09 Get A/D filter: -9.255963e+061 result=40 05:35:09 Get A/D value=-858993460 result=40 05:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:09 Aux= 05:35:09 Message to Camera, serial 264072 queued 05:35:46 Received message from Master: op=PointingHead serial=264085 05:35:46 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:35:46 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:35:46 Point started: ret=0 05:35:46 point_skyscan result=0 05:35:47 Check angles 05:35:47 SkyScan query 05:35:48 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.1<-16540 Statuses=0009 0009 05:35:48 Msec=0 True Az=63.795 Ze=-68.1 Az status=0009 Ze status=0009 05:35:48 Check angles 05:35:48 SkyScan query 05:35:48 SkyScan query done: ret=0 az=81.525<-5435 ze=-89.52<-17968 Statuses=0009 0009 05:35:48 Msec=750 True Az=81.525 Ze=-89.52 Az status=0009 Ze status=0009 05:35:49 Check angles 05:35:49 SkyScan query 05:35:49 SkyScan query done: ret=0 az=99.48<-6632 ze=-110.925<-19395 Statuses=0009 0009 05:35:49 Msec=1500 True Az=99.48 Ze=-110.925 Az status=0009 Ze status=0009 05:35:49 Check angles 05:35:49 SkyScan query 05:35:50 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.835<-20789 Statuses=0009 0009 05:35:50 Msec=2250 True Az=116.91 Ze=-131.835 Az status=0009 Ze status=0009 05:35:50 Check angles 05:35:50 SkyScan query 05:35:51 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 05:35:51 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 05:35:51 Check angles 05:35:51 SkyScan query 05:35:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:35:51 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:35:51 Message to Master queued w/err=0: serial=264085 error=0 [UTC 2018-12-19 05:35:52] 05:35:56 Received message from Master: op=Filter serial=264086 05:35:56 Color wheel filter change from 0 to 0 05:35:56 FLIGetFilterPos err=0 currentPosition=0 05:35:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:56 Filter is already there-color wheel unchanged 05:35:57 Received message from Master: op=Shutter serial=264087 05:35:57 Shutter LASER close 05:35:57 Received message from Camera: op=State serial=264089 05:35:57 GetSingleValue result=40 Value=cccccccc 05:35:57 SkyScan query 05:35:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:35:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:57 Parameters OK 05:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:57 Set A/D data flow result=40 05:35:57 Set A/D channel type result=40 05:35:57 Set A/D encoding result=40 05:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:57 Set channel filter=0.000000e+000 result=40 05:35:57 Config A/D Result=40 05:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:57 Get A/D filter: -9.255963e+061 result=40 05:35:57 Get A/D value=-858993460 result=40 05:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:57 Parameters OK 05:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:57 Set A/D data flow result=40 05:35:57 Set A/D channel type result=40 05:35:57 Set A/D encoding result=40 05:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:57 Set channel filter=0.000000e+000 result=40 05:35:57 Config A/D Result=40 05:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:57 Get A/D filter: -9.255963e+061 result=40 05:35:57 Get A/D value=-858993460 result=40 05:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:57 Aux= 05:35:57 Message to Camera, serial 264089 queued 05:36:34 Received message from Master: op=PointingHead serial=264102 05:36:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:36:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:36:34 Point started: ret=0 05:36:34 point_skyscan result=0 05:36:35 Check angles 05:36:35 SkyScan query 05:36:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 05:36:36 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 05:36:36 Check angles 05:36:36 SkyScan query 05:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:36:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:36:37 Message to Master queued w/err=0: serial=264102 error=0 05:36:42 Received message from Master: op=Filter serial=264103 05:36:42 Color wheel filter change from 0 to 0 05:36:42 FLIGetFilterPos err=0 currentPosition=0 05:36:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:42 Filter is already there-color wheel unchanged 05:36:42 Received message from Master: op=Shutter serial=264104 05:36:42 Shutter LASER open 05:36:42 Received message from Camera: op=State serial=264106 05:36:42 GetSingleValue result=40 Value=cccccccc 05:36:42 SkyScan query 05:36:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:36:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:42 Parameters OK 05:36:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:42 Set A/D data flow result=40 05:36:42 Set A/D channel type result=40 05:36:42 Set A/D encoding result=40 05:36:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:42 Set channel filter=0.000000e+000 result=40 05:36:42 Config A/D Result=40 05:36:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:42 Get A/D filter: -9.255963e+061 result=40 05:36:42 Get A/D value=-858993460 result=40 05:36:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:42 Parameters OK 05:36:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:42 Set A/D data flow result=40 05:36:42 Set A/D channel type result=40 05:36:42 Set A/D encoding result=40 05:36:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:42 Set channel filter=0.000000e+000 result=40 05:36:42 Config A/D Result=40 05:36:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:42 Get A/D filter: -9.255963e+061 result=40 05:36:42 Get A/D value=-858993460 result=40 05:36:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:42 Aux= 05:36:42 Message to Camera, serial 264106 queued 05:36:51 Received message from Master: op=Shutter serial=264116 05:36:51 Shutter LASER close 05:36:51 Received message from Master: op=PointingHead serial=264120 05:36:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:36:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:36:52 Point started: ret=0 05:36:52 point_skyscan result=0 05:36:53 Check angles 05:36:53 SkyScan query 05:36:53 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.055<-21537 Statuses=0009 0009 05:36:53 Msec=0 True Az=136.095 Ze=-143.055 Az status=0009 Ze status=0009 05:36:53 Check angles 05:36:53 SkyScan query 05:36:54 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.1<-20140 Statuses=0009 0009 05:36:54 Msec=750 True Az=153.63 Ze=-122.1 Az status=0009 Ze status=0009 05:36:54 Check angles 05:36:54 SkyScan query 05:36:55 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.16<-18744 Statuses=0009 0009 05:36:55 Msec=1500 True Az=171.135 Ze=-101.16 Az status=0009 Ze status=0009 05:36:55 Check angles 05:36:55 SkyScan query 05:36:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.755<-17317 Statuses=0008 0009 05:36:55 Msec=2250 True Az=176.01 Ze=-79.755 Az status=0008 Ze status=0009 05:36:56 Check angles 05:36:56 SkyScan query 05:36:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.77<-15918 Statuses=0008 0009 05:36:56 Msec=3000 True Az=176.01 Ze=-58.77 Az status=0008 Ze status=0009 05:36:56 Check angles 05:36:56 SkyScan query 05:36:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:36:57 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:36:57 Message to Master queued w/err=0: serial=264120 error=0 05:37:02 Received message from Master: op=Filter serial=264121 05:37:02 Color wheel filter change from 0 to 0 05:37:02 FLIGetFilterPos err=0 currentPosition=0 05:37:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:02 Filter is already there-color wheel unchanged 05:37:02 Received message from Master: op=Shutter serial=264122 05:37:02 Shutter LASER close 05:37:02 Received message from Camera: op=State serial=264124 05:37:02 GetSingleValue result=40 Value=cccccccc 05:37:02 SkyScan query 05:37:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:37:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:03 Parameters OK 05:37:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:03 Set A/D data flow result=40 05:37:03 Set A/D channel type result=40 05:37:03 Set A/D encoding result=40 05:37:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:03 Set channel filter=0.000000e+000 result=40 05:37:03 Config A/D Result=40 05:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:03 Get A/D filter: -9.255963e+061 result=40 05:37:03 Get A/D value=-858993460 result=40 05:37:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:03 Parameters OK 05:37:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:03 Set A/D data flow result=40 05:37:03 Set A/D channel type result=40 05:37:03 Set A/D encoding result=40 05:37:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:03 Set channel filter=0.000000e+000 result=40 05:37:03 Config A/D Result=40 05:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:03 Get A/D filter: -9.255963e+061 result=40 05:37:03 Get A/D value=-858993460 result=40 05:37:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:03 Aux= 05:37:03 Message to Camera, serial 264124 queued 05:37:40 Received message from Master: op=PointingHead serial=264137 05:37:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:37:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:37:40 Point started: ret=0 05:37:40 point_skyscan result=0 05:37:41 Check angles 05:37:41 SkyScan query 05:37:41 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.405<-13427 Statuses=0009 0009 05:37:41 Msec=0 True Az=152.73 Ze=-21.405 Az status=0009 Ze status=0009 05:37:41 Check angles 05:37:41 SkyScan query 05:37:42 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.465<-12031 Statuses=0009 0009 05:37:42 Msec=750 True Az=135.165 Ze=-0.465 Az status=0009 Ze status=0009 05:37:42 Check angles 05:37:42 SkyScan query 05:37:43 SkyScan query done: ret=0 az=117.675<-7845 ze=20.505<-10633 Statuses=0009 0009 05:37:43 Msec=1500 True Az=117.675 Ze=20.505 Az status=0009 Ze status=0009 05:37:43 Check angles 05:37:43 SkyScan query 05:37:44 SkyScan query done: ret=0 az=99.84<-6656 ze=41.865<-9209 Statuses=0009 0009 05:37:44 Msec=2250 True Az=99.84 Ze=41.865 Az status=0009 Ze status=0009 05:37:44 Check angles 05:37:44 SkyScan query 05:37:44 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:37:44 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:37:44 Check angles 05:37:44 SkyScan query 05:37:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:37:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:37:45 Message to Master queued w/err=0: serial=264137 error=0 05:37:50 Received message from Master: op=Filter serial=264138 05:37:50 Color wheel filter change from 0 to 0 05:37:50 FLIGetFilterPos err=0 currentPosition=0 05:37:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:50 Filter is already there-color wheel unchanged 05:37:50 Received message from Master: op=Shutter serial=264139 05:37:50 Shutter LASER close 05:37:50 Received message from Camera: op=State serial=264141 05:37:50 GetSingleValue result=40 Value=cccccccc 05:37:50 SkyScan query 05:37:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:37:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:51 Parameters OK 05:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:51 Set A/D data flow result=40 05:37:51 Set A/D channel type result=40 05:37:51 Set A/D encoding result=40 05:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:51 Set channel filter=0.000000e+000 result=40 05:37:51 Config A/D Result=40 05:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:51 Get A/D filter: -9.255963e+061 result=40 05:37:51 Get A/D value=-858993460 result=40 05:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:51 Parameters OK 05:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:51 Set A/D data flow result=40 05:37:51 Set A/D channel type result=40 05:37:51 Set A/D encoding result=40 05:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:51 Set channel filter=0.000000e+000 result=40 05:37:51 Config A/D Result=40 05:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:51 Get A/D filter: -9.255963e+061 result=40 05:37:51 Get A/D value=-858993460 result=40 05:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:51 Aux= 05:37:51 Message to Camera, serial 264141 queued 05:38:27 Received message from Master: op=PointingHead serial=264153 05:38:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:38:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:38:27 Point started: ret=0 05:38:27 point_skyscan result=0 05:38:28 Check angles 05:38:28 SkyScan query 05:38:29 SkyScan query done: ret=0 az=85.995<-5733 ze=21.585<-10561 Statuses=0008 0009 05:38:29 Msec=0 True Az=85.995 Ze=21.585 Az status=0008 Ze status=0009 05:38:29 Check angles 05:38:29 SkyScan query 05:38:29 SkyScan query done: ret=0 az=85.995<-5733 ze=0.21<-11986 Statuses=0008 0009 05:38:29 Msec=750 True Az=85.995 Ze=0.21 Az status=0008 Ze status=0009 05:38:30 Check angles 05:38:30 SkyScan query 05:38:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.745<-13383 Statuses=0008 0009 05:38:30 Msec=1500 True Az=85.995 Ze=-20.745 Az status=0008 Ze status=0009 05:38:30 Check angles 05:38:30 SkyScan query 05:38:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.685<-14779 Statuses=0008 0009 05:38:31 Msec=2250 True Az=85.995 Ze=-41.685 Az status=0008 Ze status=0009 05:38:31 Check angles 05:38:31 SkyScan query 05:38:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:38:32 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:38:32 Message to Master queued w/err=0: serial=264153 error=0 05:38:37 Received message from Master: op=Filter serial=264154 05:38:37 Color wheel filter change from 0 to 0 05:38:37 FLIGetFilterPos err=0 currentPosition=0 05:38:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:37 Filter is already there-color wheel unchanged 05:38:37 Received message from Master: op=Shutter serial=264155 05:38:37 Shutter LASER close 05:38:37 Received message from Camera: op=State serial=264157 05:38:37 GetSingleValue result=40 Value=cccccccc 05:38:37 SkyScan query 05:38:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:38:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:37 Parameters OK 05:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:37 Set A/D data flow result=40 05:38:37 Set A/D channel type result=40 05:38:37 Set A/D encoding result=40 05:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:37 Set channel filter=0.000000e+000 result=40 05:38:37 Config A/D Result=40 05:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:37 Get A/D filter: -9.255963e+061 result=40 05:38:37 Get A/D value=-858993460 result=40 05:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:37 Parameters OK 05:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:37 Set A/D data flow result=40 05:38:37 Set A/D channel type result=40 05:38:37 Set A/D encoding result=40 05:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:37 Set channel filter=0.000000e+000 result=40 05:38:37 Config A/D Result=40 05:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:37 Get A/D filter: -9.255963e+061 result=40 05:38:37 Get A/D value=-858993460 result=40 05:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:37 Aux= 05:38:37 Message to Camera, serial 264157 queued 05:39:14 Received message from Master: op=PointingHead serial=264170 05:39:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:39:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:39:15 Point started: ret=0 05:39:15 point_skyscan result=0 05:39:15 Check angles 05:39:15 SkyScan query 05:39:16 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.405<-17427 Statuses=0009 0009 05:39:16 Msec=0 True Az=109.17 Ze=-81.405 Az status=0009 Ze status=0009 05:39:16 Check angles 05:39:16 SkyScan query 05:39:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 05:39:17 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 05:39:17 Check angles 05:39:17 SkyScan query 05:39:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 05:39:17 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 05:39:18 Check angles 05:39:18 SkyScan query 05:39:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.11<-21674 Statuses=0008 0009 05:39:18 Msec=2250 True Az=112.995 Ze=-145.11 Az status=0008 Ze status=0009 05:39:18 Check angles 05:39:18 SkyScan query 05:39:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.5<-23100 Statuses=0008 0009 05:39:19 Msec=3000 True Az=112.995 Ze=-166.5 Az status=0008 Ze status=0009 05:39:19 Check angles 05:39:19 SkyScan query 05:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:39:20 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:39:20 Message to Master queued w/err=0: serial=264170 error=0 05:39:25 Received message from Master: op=Filter serial=264171 05:39:25 Color wheel filter change from 0 to 0 05:39:25 FLIGetFilterPos err=0 currentPosition=0 05:39:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:25 Filter is already there-color wheel unchanged 05:39:25 Received message from Master: op=Shutter serial=264172 05:39:25 Shutter LASER open 05:39:25 Received message from Camera: op=State serial=264174 05:39:25 GetSingleValue result=40 Value=cccccccc 05:39:25 SkyScan query 05:39:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:39:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:26 Parameters OK 05:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:26 Set A/D data flow result=40 05:39:26 Set A/D channel type result=40 05:39:26 Set A/D encoding result=40 05:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:26 Set channel filter=0.000000e+000 result=40 05:39:26 Config A/D Result=40 05:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:26 Get A/D filter: -9.255963e+061 result=40 05:39:26 Get A/D value=-858993460 result=40 05:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:26 Parameters OK 05:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:26 Set A/D data flow result=40 05:39:26 Set A/D channel type result=40 05:39:26 Set A/D encoding result=40 05:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:26 Set channel filter=0.000000e+000 result=40 05:39:26 Config A/D Result=40 05:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:26 Get A/D filter: -9.255963e+061 result=40 05:39:26 Get A/D value=-858993460 result=40 05:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:26 Aux= 05:39:26 Message to Camera, serial 264174 queued 05:39:34 Received message from Master: op=Shutter serial=264184 05:39:34 Shutter LASER close 05:39:35 Received message from Master: op=PointingHead serial=264188 05:39:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:39:35 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:39:35 Point started: ret=0 05:39:35 point_skyscan result=0 05:39:36 Check angles 05:39:36 SkyScan query 05:39:36 SkyScan query done: ret=0 az=90.24<-6016 ze=157.56<-1496 Statuses=0009 0009 05:39:36 Msec=0 True Az=90.24 Ze=157.56 Az status=0009 Ze status=0009 05:39:36 Check angles 05:39:36 SkyScan query 05:39:37 SkyScan query done: ret=0 az=72.75<-4850 ze=136.575<-2895 Statuses=0009 0009 05:39:37 Msec=750 True Az=72.75 Ze=136.575 Az status=0009 Ze status=0009 05:39:37 Check angles 05:39:37 SkyScan query 05:39:38 SkyScan query done: ret=0 az=55.32<-3688 ze=115.68<-4288 Statuses=0009 0009 05:39:38 Msec=1500 True Az=55.32 Ze=115.68 Az status=0009 Ze status=0009 05:39:38 Check angles 05:39:38 SkyScan query 05:39:38 SkyScan query done: ret=0 az=41.025<-2735 ze=94.665<-5689 Statuses=0009 0009 05:39:38 Msec=2250 True Az=41.025 Ze=94.665 Az status=0009 Ze status=0009 05:39:39 Check angles 05:39:39 SkyScan query 05:39:39 SkyScan query done: ret=0 az=40.995<-2733 ze=73.785<-7081 Statuses=0008 0009 05:39:39 Msec=3000 True Az=40.995 Ze=73.785 Az status=0008 Ze status=0009 05:39:39 Check angles 05:39:39 SkyScan query 05:39:40 SkyScan query done: ret=0 az=40.995<-2733 ze=53.04<-8464 Statuses=0008 0009 05:39:40 Msec=3750 True Az=40.995 Ze=53.04 Az status=0008 Ze status=0009 05:39:40 Check angles 05:39:40 SkyScan query 05:39:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:39:41 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:39:41 Message to Master queued w/err=0: serial=264188 error=0 05:39:46 Received message from Master: op=Filter serial=264189 05:39:46 Color wheel filter change from 0 to 0 05:39:46 FLIGetFilterPos err=0 currentPosition=0 05:39:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:46 Filter is already there-color wheel unchanged 05:39:46 Received message from Master: op=Shutter serial=264190 05:39:46 Shutter LASER close 05:39:46 Received message from Camera: op=State serial=264192 05:39:46 GetSingleValue result=40 Value=cccccccc 05:39:46 SkyScan query 05:39:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:39:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:47 Parameters OK 05:39:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:47 Set A/D data flow result=40 05:39:47 Set A/D channel type result=40 05:39:47 Set A/D encoding result=40 05:39:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:47 Set channel filter=0.000000e+000 result=40 05:39:47 Config A/D Result=40 05:39:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:47 Get A/D filter: -9.255963e+061 result=40 05:39:47 Get A/D value=-858993460 result=40 05:39:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:47 Parameters OK 05:39:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:47 Set A/D data flow result=40 05:39:47 Set A/D channel type result=40 05:39:47 Set A/D encoding result=40 05:39:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:47 Set channel filter=0.000000e+000 result=40 05:39:47 Config A/D Result=40 05:39:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:47 Get A/D filter: -9.255963e+061 result=40 05:39:47 Get A/D value=-858993460 result=40 05:39:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:47 Aux= 05:39:47 Message to Camera, serial 264192 queued 05:40:24 Received message from Master: op=PointingHead serial=264205 05:40:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:40:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:40:24 Point started: ret=0 05:40:24 point_skyscan result=0 05:40:25 Check angles 05:40:25 SkyScan query 05:40:25 SkyScan query done: ret=0 az=40.995<-2733 ze=21.555<-10563 Statuses=0008 0009 05:40:25 Msec=0 True Az=40.995 Ze=21.555 Az status=0008 Ze status=0009 05:40:25 Check angles 05:40:25 SkyScan query 05:40:26 SkyScan query done: ret=0 az=40.995<-2733 ze=0.465<-11969 Statuses=0008 0009 05:40:26 Msec=750 True Az=40.995 Ze=0.465 Az status=0008 Ze status=0009 05:40:26 Check angles 05:40:26 SkyScan query 05:40:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.385<-13359 Statuses=0008 0009 05:40:27 Msec=1500 True Az=40.995 Ze=-20.385 Az status=0008 Ze status=0009 05:40:27 Check angles 05:40:27 SkyScan query 05:40:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 05:40:28 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 05:40:28 Check angles 05:40:28 SkyScan query 05:40:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:40:28 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:40:28 Message to Master queued w/err=0: serial=264205 error=0 05:40:33 Received message from Master: op=Filter serial=264206 05:40:33 Color wheel filter change from 0 to 0 05:40:33 FLIGetFilterPos err=0 currentPosition=0 05:40:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:33 Filter is already there-color wheel unchanged 05:40:33 Received message from Master: op=Shutter serial=264207 05:40:33 Shutter LASER close 05:40:33 Received message from Camera: op=State serial=264209 05:40:33 GetSingleValue result=40 Value=cccccccc 05:40:33 SkyScan query 05:40:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:40:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:34 Parameters OK 05:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:34 Set A/D data flow result=40 05:40:34 Set A/D channel type result=40 05:40:34 Set A/D encoding result=40 05:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:34 Set channel filter=0.000000e+000 result=40 05:40:34 Config A/D Result=40 05:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:34 Get A/D filter: -9.255963e+061 result=40 05:40:34 Get A/D value=-858993460 result=40 05:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:34 Parameters OK 05:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:34 Set A/D data flow result=40 05:40:34 Set A/D channel type result=40 05:40:34 Set A/D encoding result=40 05:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:34 Set channel filter=0.000000e+000 result=40 05:40:34 Config A/D Result=40 05:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:34 Get A/D filter: -9.255963e+061 result=40 05:40:34 Get A/D value=-858993460 result=40 05:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:34 Aux= 05:40:34 Message to Camera, serial 264209 queued 05:41:11 Received message from Master: op=PointingHead serial=264222 05:41:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:41:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:41:11 Point started: ret=0 05:41:11 point_skyscan result=0 05:41:12 Check angles 05:41:12 SkyScan query 05:41:13 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.55<-16570 Statuses=0009 0009 05:41:13 Msec=0 True Az=64.245 Ze=-68.55 Az status=0009 Ze status=0009 05:41:13 Check angles 05:41:13 SkyScan query 05:41:13 SkyScan query done: ret=0 az=82.02<-5468 ze=-89.94<-17996 Statuses=0009 0009 05:41:13 Msec=750 True Az=82.02 Ze=-89.94 Az status=0009 Ze status=0009 05:41:14 Check angles 05:41:14 SkyScan query 05:41:14 SkyScan query done: ret=0 az=99.96<-6664 ze=-111.3<-19420 Statuses=0009 0009 05:41:14 Msec=1500 True Az=99.96 Ze=-111.3 Az status=0009 Ze status=0009 05:41:14 Check angles 05:41:14 SkyScan query 05:41:15 SkyScan query done: ret=0 az=117.48<-7832 ze=-132.27<-20818 Statuses=0009 0009 05:41:15 Msec=2250 True Az=117.48 Ze=-132.27 Az status=0009 Ze status=0009 05:41:15 Check angles 05:41:15 SkyScan query 05:41:16 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 05:41:16 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 05:41:16 Check angles 05:41:16 SkyScan query 05:41:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 05:41:16 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 05:41:16 Message to Master queued w/err=0: serial=264222 error=0 05:41:21 Received message from Master: op=Filter serial=264223 05:41:21 Color wheel filter change from 0 to 0 05:41:21 FLIGetFilterPos err=0 currentPosition=0 05:41:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:21 Filter is already there-color wheel unchanged 05:41:22 Received message from Master: op=Shutter serial=264224 05:41:22 Shutter LASER close 05:41:22 Received message from Camera: op=State serial=264226 05:41:22 GetSingleValue result=40 Value=cccccccc 05:41:22 SkyScan query 05:41:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:41:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:22 Parameters OK 05:41:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:22 Set A/D data flow result=40 05:41:22 Set A/D channel type result=40 05:41:22 Set A/D encoding result=40 05:41:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:22 Set channel filter=0.000000e+000 result=40 05:41:22 Config A/D Result=40 05:41:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:22 Get A/D filter: -9.255963e+061 result=40 05:41:22 Get A/D value=-858993460 result=40 05:41:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:22 Parameters OK 05:41:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:22 Set A/D data flow result=40 05:41:22 Set A/D channel type result=40 05:41:22 Set A/D encoding result=40 05:41:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:22 Set channel filter=0.000000e+000 result=40 05:41:22 Config A/D Result=40 05:41:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:22 Get A/D filter: -9.255963e+061 result=40 05:41:22 Get A/D value=-858993460 result=40 05:41:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:22 Aux= 05:41:22 Message to Camera, serial 264226 queued 05:41:59 Received message from Master: op=PointingHead serial=264239 05:41:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:41:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:41:59 Point started: ret=0 05:41:59 point_skyscan result=0 05:42:00 Check angles 05:42:00 SkyScan query 05:42:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.33<-23422 Statuses=0009 0009 05:42:01 Msec=0 True Az=113.01 Ze=-171.33 Az status=0009 Ze status=0009 05:42:01 Check angles 05:42:01 SkyScan query 05:42:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:42:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:42:01 Message to Master queued w/err=0: serial=264239 error=0 05:42:06 Received message from Master: op=Filter serial=264240 05:42:06 Color wheel filter change from 0 to 0 05:42:06 FLIGetFilterPos err=0 currentPosition=0 05:42:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:06 Filter is already there-color wheel unchanged 05:42:07 Received message from Master: op=Shutter serial=264241 05:42:07 Shutter LASER open 05:42:07 Received message from Camera: op=State serial=264243 05:42:07 GetSingleValue result=40 Value=cccccccc 05:42:07 SkyScan query 05:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:42:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:07 Parameters OK 05:42:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:07 Set A/D data flow result=40 05:42:07 Set A/D channel type result=40 05:42:07 Set A/D encoding result=40 05:42:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:07 Set channel filter=0.000000e+000 result=40 05:42:07 Config A/D Result=40 05:42:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:07 Get A/D filter: -9.255963e+061 result=40 05:42:07 Get A/D value=-858993460 result=40 05:42:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:07 Parameters OK 05:42:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:07 Set A/D data flow result=40 05:42:07 Set A/D channel type result=40 05:42:07 Set A/D encoding result=40 05:42:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:07 Set channel filter=0.000000e+000 result=40 05:42:07 Config A/D Result=40 05:42:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:07 Get A/D filter: -9.255963e+061 result=40 05:42:07 Get A/D value=-858993460 result=40 05:42:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:07 Aux= 05:42:07 Message to Camera, serial 264243 queued 05:42:16 Received message from Master: op=Shutter serial=264253 05:42:16 Shutter LASER close 05:42:16 Received message from Master: op=PointingHead serial=264257 05:42:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:42:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:42:17 Point started: ret=0 05:42:17 point_skyscan result=0 05:42:18 Check angles 05:42:18 SkyScan query 05:42:18 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.785<-21519 Statuses=0009 0009 05:42:18 Msec=0 True Az=136.305 Ze=-142.785 Az status=0009 Ze status=0009 05:42:18 Check angles 05:42:18 SkyScan query 05:42:19 SkyScan query done: ret=0 az=154.125<-10275 ze=-121.44<-20096 Statuses=0009 0009 05:42:19 Msec=750 True Az=154.125 Ze=-121.44 Az status=0009 Ze status=0009 05:42:19 Check angles 05:42:19 SkyScan query 05:42:20 SkyScan query done: ret=0 az=171.6<-11440 ze=-100.38<-18692 Statuses=0009 0009 05:42:20 Msec=1500 True Az=171.6 Ze=-100.38 Az status=0009 Ze status=0009 05:42:20 Check angles 05:42:20 SkyScan query 05:42:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 05:42:20 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 05:42:21 Check angles 05:42:21 SkyScan query 05:42:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.47<-15898 Statuses=0008 0009 05:42:21 Msec=3000 True Az=176.01 Ze=-58.47 Az status=0008 Ze status=0009 05:42:21 Check angles 05:42:21 SkyScan query 05:42:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 05:42:22 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 05:42:22 Message to Master queued w/err=0: serial=264257 error=0 05:42:27 Received message from Master: op=Filter serial=264258 05:42:27 Color wheel filter change from 0 to 0 05:42:27 FLIGetFilterPos err=0 currentPosition=0 05:42:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:27 Filter is already there-color wheel unchanged 05:42:27 Received message from Master: op=Shutter serial=264259 05:42:27 Shutter LASER close 05:42:27 Received message from Camera: op=State serial=264261 05:42:27 GetSingleValue result=40 Value=cccccccc 05:42:27 SkyScan query 05:42:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:42:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:28 Parameters OK 05:42:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:28 Set A/D data flow result=40 05:42:28 Set A/D channel type result=40 05:42:28 Set A/D encoding result=40 05:42:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:28 Set channel filter=0.000000e+000 result=40 05:42:28 Config A/D Result=40 05:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:28 Get A/D filter: -9.255963e+061 result=40 05:42:28 Get A/D value=-858993460 result=40 05:42:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:28 Parameters OK 05:42:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:28 Set A/D data flow result=40 05:42:28 Set A/D channel type result=40 05:42:28 Set A/D encoding result=40 05:42:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:28 Set channel filter=0.000000e+000 result=40 05:42:28 Config A/D Result=40 05:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:28 Get A/D filter: -9.255963e+061 result=40 05:42:28 Get A/D value=-858993460 result=40 05:42:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:28 Aux= 05:42:28 Message to Camera, serial 264261 queued 05:43:05 Received message from Master: op=PointingHead serial=264274 05:43:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:43:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:43:05 Point started: ret=0 05:43:05 point_skyscan result=0 05:43:06 Check angles 05:43:06 SkyScan query 05:43:06 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.36<-13424 Statuses=0009 0009 05:43:06 Msec=0 True Az=152.655 Ze=-21.36 Az status=0009 Ze status=0009 05:43:07 Check angles 05:43:07 SkyScan query 05:43:07 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.45<-12030 Statuses=0009 0009 05:43:07 Msec=750 True Az=135.09 Ze=-0.45 Az status=0009 Ze status=0009 05:43:07 Check angles 05:43:07 SkyScan query 05:43:08 SkyScan query done: ret=0 az=117.18<-7812 ze=21.015<-10599 Statuses=0009 0009 05:43:08 Msec=1500 True Az=117.18 Ze=21.015 Az status=0009 Ze status=0009 05:43:08 Check angles 05:43:08 SkyScan query 05:43:09 SkyScan query done: ret=0 az=99.795<-6653 ze=41.925<-9205 Statuses=0009 0009 05:43:09 Msec=2250 True Az=99.795 Ze=41.925 Az status=0009 Ze status=0009 05:43:09 Check angles 05:43:09 SkyScan query 05:43:09 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 05:43:09 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 05:43:10 Check angles 05:43:10 SkyScan query 05:43:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:43:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:43:10 Message to Master queued w/err=0: serial=264274 error=0 05:43:15 Received message from Master: op=Filter serial=264275 05:43:15 Color wheel filter change from 0 to 0 05:43:15 FLIGetFilterPos err=0 currentPosition=0 05:43:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:15 Filter is already there-color wheel unchanged 05:43:15 Received message from Master: op=Shutter serial=264276 05:43:15 Shutter LASER close 05:43:15 Received message from Camera: op=State serial=264278 05:43:15 GetSingleValue result=40 Value=cccccccc 05:43:15 SkyScan query 05:43:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:43:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:16 Parameters OK 05:43:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:16 Set A/D data flow result=40 05:43:16 Set A/D channel type result=40 05:43:16 Set A/D encoding result=40 05:43:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:16 Set channel filter=0.000000e+000 result=40 05:43:16 Config A/D Result=40 05:43:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:16 Get A/D filter: -9.255963e+061 result=40 05:43:16 Get A/D value=-858993460 result=40 05:43:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:16 Parameters OK 05:43:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:16 Set A/D data flow result=40 05:43:16 Set A/D channel type result=40 05:43:16 Set A/D encoding result=40 05:43:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:16 Set channel filter=0.000000e+000 result=40 05:43:16 Config A/D Result=40 05:43:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:16 Get A/D filter: -9.255963e+061 result=40 05:43:16 Get A/D value=-858993460 result=40 05:43:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:16 Aux= 05:43:16 Message to Camera, serial 264278 queued 05:43:53 Received message from Master: op=PointingHead serial=264291 05:43:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:43:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:43:53 Point started: ret=0 05:43:53 point_skyscan result=0 05:43:54 Check angles 05:43:54 SkyScan query 05:43:55 SkyScan query done: ret=0 az=85.995<-5733 ze=21.12<-10592 Statuses=0008 0009 05:43:55 Msec=0 True Az=85.995 Ze=21.12 Az status=0008 Ze status=0009 05:43:55 Check angles 05:43:55 SkyScan query 05:43:55 SkyScan query done: ret=0 az=86.01<-5734 ze=0.18<-11988 Statuses=0008 0009 05:43:55 Msec=750 True Az=86.01 Ze=0.18 Az status=0008 Ze status=0009 05:43:55 Check angles 05:43:55 SkyScan query 05:43:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.775<-13385 Statuses=0008 0009 05:43:56 Msec=1500 True Az=85.995 Ze=-20.775 Az status=0008 Ze status=0009 05:43:56 Check angles 05:43:56 SkyScan query 05:43:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.7<-14780 Statuses=0008 0009 05:43:57 Msec=2250 True Az=85.995 Ze=-41.7 Az status=0008 Ze status=0009 05:43:57 Check angles 05:43:57 SkyScan query 05:43:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:43:58 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:43:58 Message to Master queued w/err=0: serial=264291 error=0 05:44:03 Received message from Master: op=Filter serial=264292 05:44:03 Color wheel filter change from 0 to 0 05:44:03 FLIGetFilterPos err=0 currentPosition=0 05:44:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:03 Filter is already there-color wheel unchanged 05:44:03 Received message from Master: op=Shutter serial=264293 05:44:03 Shutter LASER close 05:44:03 Received message from Camera: op=State serial=264295 05:44:03 GetSingleValue result=40 Value=cccccccc 05:44:03 SkyScan query 05:44:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:44:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:03 Parameters OK 05:44:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:03 Set A/D data flow result=40 05:44:03 Set A/D channel type result=40 05:44:03 Set A/D encoding result=40 05:44:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:03 Set channel filter=0.000000e+000 result=40 05:44:03 Config A/D Result=40 05:44:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:03 Get A/D filter: -9.255963e+061 result=40 05:44:03 Get A/D value=-858993460 result=40 05:44:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:03 Parameters OK 05:44:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:03 Set A/D data flow result=40 05:44:03 Set A/D channel type result=40 05:44:03 Set A/D encoding result=40 05:44:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:03 Set channel filter=0.000000e+000 result=40 05:44:03 Config A/D Result=40 05:44:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:03 Get A/D filter: -9.255963e+061 result=40 05:44:03 Get A/D value=-858993460 result=40 05:44:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:03 Aux= 05:44:03 Message to Camera, serial 264295 queued 05:44:40 Received message from Master: op=PointingHead serial=264308 05:44:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:44:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:44:41 Point started: ret=0 05:44:41 point_skyscan result=0 05:44:41 Check angles 05:44:41 SkyScan query 05:44:42 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.3<-17420 Statuses=0009 0009 05:44:42 Msec=0 True Az=109.02 Ze=-81.3 Az status=0009 Ze status=0009 05:44:42 Check angles 05:44:42 SkyScan query 05:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 05:44:43 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 05:44:43 Check angles 05:44:43 SkyScan query 05:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.21<-20214 Statuses=0008 0009 05:44:43 Msec=1500 True Az=112.995 Ze=-123.21 Az status=0008 Ze status=0009 05:44:44 Check angles 05:44:44 SkyScan query 05:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 05:44:44 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 05:44:44 Check angles 05:44:44 SkyScan query 05:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 05:44:45 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 05:44:45 Check angles 05:44:45 SkyScan query 05:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:44:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:44:46 Message to Master queued w/err=0: serial=264308 error=0 05:44:51 Received message from Master: op=Filter serial=264309 05:44:51 Color wheel filter change from 0 to 0 05:44:51 FLIGetFilterPos err=0 currentPosition=0 05:44:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:51 Filter is already there-color wheel unchanged 05:44:51 Received message from Master: op=Shutter serial=264310 05:44:51 Shutter LASER open 05:44:51 Received message from Camera: op=State serial=264312 05:44:51 GetSingleValue result=40 Value=cccccccc 05:44:51 SkyScan query 05:44:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:44:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:52 Parameters OK 05:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:52 Set A/D data flow result=40 05:44:52 Set A/D channel type result=40 05:44:52 Set A/D encoding result=40 05:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:52 Set channel filter=0.000000e+000 result=40 05:44:52 Config A/D Result=40 05:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:52 Get A/D filter: -9.255963e+061 result=40 05:44:52 Get A/D value=-858993460 result=40 05:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:52 Parameters OK 05:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:52 Set A/D data flow result=40 05:44:52 Set A/D channel type result=40 05:44:52 Set A/D encoding result=40 05:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:52 Set channel filter=0.000000e+000 result=40 05:44:52 Config A/D Result=40 05:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:52 Get A/D filter: -9.255963e+061 result=40 05:44:52 Get A/D value=-858993460 result=40 05:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:52 Aux= 05:44:52 Message to Camera, serial 264312 queued 05:45:00 Received message from Master: op=Shutter serial=264322 05:45:00 Shutter LASER close 05:45:00 Received message from Master: op=PointingHead serial=264326 05:45:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:45:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:45:01 Point started: ret=0 05:45:01 point_skyscan result=0 05:45:02 Check angles 05:45:02 SkyScan query 05:45:02 SkyScan query done: ret=0 az=89.625<-5975 ze=156.84<-1544 Statuses=0009 0009 05:45:02 Msec=0 True Az=89.625 Ze=156.84 Az status=0009 Ze status=0009 05:45:02 Check angles 05:45:02 SkyScan query 05:45:03 SkyScan query done: ret=0 az=71.805<-4787 ze=135.465<-2969 Statuses=0009 0009 05:45:03 Msec=750 True Az=71.805 Ze=135.465 Az status=0009 Ze status=0009 05:45:03 Check angles 05:45:03 SkyScan query 05:45:04 SkyScan query done: ret=0 az=54.315<-3621 ze=114.45<-4370 Statuses=0009 0009 05:45:04 Msec=1500 True Az=54.315 Ze=114.45 Az status=0009 Ze status=0009 05:45:04 Check angles 05:45:04 SkyScan query 05:45:04 SkyScan query done: ret=0 az=40.965<-2731 ze=93.54<-5764 Statuses=0009 0009 05:45:04 Msec=2250 True Az=40.965 Ze=93.54 Az status=0009 Ze status=0009 05:45:05 Check angles 05:45:05 SkyScan query 05:45:05 SkyScan query done: ret=0 az=40.995<-2733 ze=72.555<-7163 Statuses=0008 0009 05:45:05 Msec=3000 True Az=40.995 Ze=72.555 Az status=0008 Ze status=0009 05:45:05 Check angles 05:45:05 SkyScan query 05:45:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 05:45:06 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 05:45:06 Check angles 05:45:06 SkyScan query 05:45:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:45:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:45:07 Message to Master queued w/err=0: serial=264326 error=0 05:45:12 Received message from Master: op=Filter serial=264327 05:45:12 Color wheel filter change from 0 to 0 05:45:12 FLIGetFilterPos err=0 currentPosition=0 05:45:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:12 Filter is already there-color wheel unchanged 05:45:12 Received message from Master: op=Shutter serial=264328 05:45:12 Shutter LASER close 05:45:12 Received message from Camera: op=State serial=264330 05:45:12 GetSingleValue result=40 Value=cccccccc 05:45:12 SkyScan query 05:45:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:45:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:13 Parameters OK 05:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:13 Set A/D data flow result=40 05:45:13 Set A/D channel type result=40 05:45:13 Set A/D encoding result=40 05:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:13 Set channel filter=0.000000e+000 result=40 05:45:13 Config A/D Result=40 05:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:13 Get A/D filter: -9.255963e+061 result=40 05:45:13 Get A/D value=-858993460 result=40 05:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:13 Parameters OK 05:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:13 Set A/D data flow result=40 05:45:13 Set A/D channel type result=40 05:45:13 Set A/D encoding result=40 05:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:13 Set channel filter=0.000000e+000 result=40 05:45:13 Config A/D Result=40 [UTC 2018-12-19 05:45:13] 05:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:13 Get A/D filter: -9.255963e+061 result=40 05:45:13 Get A/D value=-858993460 result=40 05:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:13 Aux= 05:45:13 Message to Camera, serial 264330 queued 05:45:27 Received message from Master: op=Identify serial=264331 05:45:49 Received message from Master: op=PointingHead serial=264346 05:45:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:45:49 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:45:50 Point started: ret=0 05:45:50 point_skyscan result=0 05:45:51 Check angles 05:45:51 SkyScan query 05:45:51 SkyScan query done: ret=0 az=40.995<-2733 ze=21.945<-10537 Statuses=0008 0009 05:45:51 Msec=0 True Az=40.995 Ze=21.945 Az status=0008 Ze status=0009 05:45:51 Check angles 05:45:51 SkyScan query 05:45:52 SkyScan query done: ret=0 az=40.995<-2733 ze=1.02<-11932 Statuses=0008 0009 05:45:52 Msec=750 True Az=40.995 Ze=1.02 Az status=0008 Ze status=0009 05:45:52 Check angles 05:45:52 SkyScan query 05:45:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-19.92<-13328 Statuses=0008 0009 05:45:53 Msec=1500 True Az=40.995 Ze=-19.92 Az status=0008 Ze status=0009 05:45:53 Check angles 05:45:53 SkyScan query 05:45:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.52<-14568 Statuses=0008 0009 05:45:53 Msec=2250 True Az=40.995 Ze=-38.52 Az status=0008 Ze status=0009 05:45:54 Check angles 05:45:54 SkyScan query 05:45:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:45:54 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:45:54 Message to Master queued w/err=0: serial=264346 error=0 05:45:59 Received message from Master: op=Filter serial=264347 05:45:59 Color wheel filter change from 0 to 0 05:45:59 FLIGetFilterPos err=0 currentPosition=0 05:45:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:59 Filter is already there-color wheel unchanged 05:45:59 Received message from Master: op=Shutter serial=264348 05:45:59 Shutter LASER close 05:45:59 Received message from Camera: op=State serial=264350 05:45:59 GetSingleValue result=40 Value=cccccccc 05:45:59 SkyScan query 05:46:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:46:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:00 Parameters OK 05:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:00 Set A/D data flow result=40 05:46:00 Set A/D channel type result=40 05:46:00 Set A/D encoding result=40 05:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:00 Set channel filter=0.000000e+000 result=40 05:46:00 Config A/D Result=40 05:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:00 Get A/D filter: -9.255963e+061 result=40 05:46:00 Get A/D value=-858993460 result=40 05:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:00 Parameters OK 05:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:00 Set A/D data flow result=40 05:46:00 Set A/D channel type result=40 05:46:00 Set A/D encoding result=40 05:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:00 Set channel filter=0.000000e+000 result=40 05:46:00 Config A/D Result=40 05:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:00 Get A/D filter: -9.255963e+061 result=40 05:46:00 Get A/D value=-858993460 result=40 05:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:00 Aux= 05:46:00 Message to Camera, serial 264350 queued 05:46:37 Received message from Master: op=PointingHead serial=264363 05:46:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:46:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:46:37 Point started: ret=0 05:46:37 point_skyscan result=0 05:46:38 Check angles 05:46:38 SkyScan query 05:46:39 SkyScan query done: ret=0 az=64.455<-4297 ze=-68.82<-16588 Statuses=0009 0009 05:46:39 Msec=0 True Az=64.455 Ze=-68.82 Az status=0009 Ze status=0009 05:46:39 Check angles 05:46:39 SkyScan query 05:46:39 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.79<-17986 Statuses=0009 0009 05:46:39 Msec=750 True Az=81.795 Ze=-89.79 Az status=0009 Ze status=0009 05:46:39 Check angles 05:46:39 SkyScan query 05:46:40 SkyScan query done: ret=0 az=99.87<-6658 ze=-111.165<-19411 Statuses=0009 0009 05:46:40 Msec=1500 True Az=99.87 Ze=-111.165 Az status=0009 Ze status=0009 05:46:40 Check angles 05:46:40 SkyScan query 05:46:41 SkyScan query done: ret=0 az=117.285<-7819 ze=-132.105<-20807 Statuses=0009 0009 05:46:41 Msec=2250 True Az=117.285 Ze=-132.105 Az status=0009 Ze status=0009 05:46:41 Check angles 05:46:41 SkyScan query 05:46:42 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 05:46:42 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 05:46:42 Check angles 05:46:42 SkyScan query 05:46:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:46:42 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:46:42 Message to Master queued w/err=0: serial=264363 error=0 05:46:47 Received message from Master: op=Filter serial=264364 05:46:47 Color wheel filter change from 0 to 0 05:46:47 FLIGetFilterPos err=0 currentPosition=0 05:46:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:47 Filter is already there-color wheel unchanged 05:46:47 Received message from Master: op=Shutter serial=264365 05:46:47 Shutter LASER close 05:46:48 Received message from Camera: op=State serial=264367 05:46:48 GetSingleValue result=40 Value=cccccccc 05:46:48 SkyScan query 05:46:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:46:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:48 Parameters OK 05:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:48 Set A/D data flow result=40 05:46:48 Set A/D channel type result=40 05:46:48 Set A/D encoding result=40 05:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:48 Set channel filter=0.000000e+000 result=40 05:46:48 Config A/D Result=40 05:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:48 Get A/D filter: -9.255963e+061 result=40 05:46:48 Get A/D value=-858993460 result=40 05:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:48 Parameters OK 05:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:48 Set A/D data flow result=40 05:46:48 Set A/D channel type result=40 05:46:48 Set A/D encoding result=40 05:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:48 Set channel filter=0.000000e+000 result=40 05:46:48 Config A/D Result=40 05:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:48 Get A/D filter: -9.255963e+061 result=40 05:46:48 Get A/D value=-858993460 result=40 05:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:48 Aux= 05:46:48 Message to Camera, serial 264367 queued 05:47:25 Received message from Master: op=PointingHead serial=264380 05:47:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:47:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:47:25 Point started: ret=0 05:47:25 point_skyscan result=0 05:47:26 Check angles 05:47:26 SkyScan query 05:47:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.345<-23423 Statuses=0009 0009 05:47:27 Msec=0 True Az=113.01 Ze=-171.345 Az status=0009 Ze status=0009 05:47:27 Check angles 05:47:27 SkyScan query 05:47:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:47:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:47:27 Message to Master queued w/err=0: serial=264380 error=0 05:47:32 Received message from Master: op=Filter serial=264381 05:47:32 Color wheel filter change from 0 to 0 05:47:32 FLIGetFilterPos err=0 currentPosition=0 05:47:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:32 Filter is already there-color wheel unchanged 05:47:33 Received message from Master: op=Shutter serial=264382 05:47:33 Shutter LASER open 05:47:33 Received message from Camera: op=State serial=264384 05:47:33 GetSingleValue result=40 Value=cccccccc 05:47:33 SkyScan query 05:47:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:47:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:33 Parameters OK 05:47:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:33 Set A/D data flow result=40 05:47:33 Set A/D channel type result=40 05:47:33 Set A/D encoding result=40 05:47:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:33 Set channel filter=0.000000e+000 result=40 05:47:33 Config A/D Result=40 05:47:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:33 Get A/D filter: -9.255963e+061 result=40 05:47:33 Get A/D value=-858993460 result=40 05:47:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:33 Parameters OK 05:47:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:33 Set A/D data flow result=40 05:47:33 Set A/D channel type result=40 05:47:33 Set A/D encoding result=40 05:47:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:33 Set channel filter=0.000000e+000 result=40 05:47:33 Config A/D Result=40 05:47:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:33 Get A/D filter: -9.255963e+061 result=40 05:47:33 Get A/D value=-858993460 result=40 05:47:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:33 Aux= 05:47:33 Message to Camera, serial 264384 queued 05:47:42 Received message from Master: op=Shutter serial=264394 05:47:42 Shutter LASER close 05:47:42 Received message from Master: op=PointingHead serial=264398 05:47:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:47:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:47:43 Point started: ret=0 05:47:43 point_skyscan result=0 05:47:43 Check angles 05:47:43 SkyScan query 05:47:44 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.055<-21537 Statuses=0009 0009 05:47:44 Msec=0 True Az=136.14 Ze=-143.055 Az status=0009 Ze status=0009 05:47:44 Check angles 05:47:44 SkyScan query 05:47:45 SkyScan query done: ret=0 az=154.095<-10273 ze=-121.65<-20110 Statuses=0009 0009 05:47:45 Msec=750 True Az=154.095 Ze=-121.65 Az status=0009 Ze status=0009 05:47:45 Check angles 05:47:45 SkyScan query 05:47:46 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.605<-18707 Statuses=0009 0009 05:47:46 Msec=1500 True Az=171.555 Ze=-100.605 Az status=0009 Ze status=0009 05:47:46 Check angles 05:47:46 SkyScan query 05:47:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 05:47:46 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 05:47:47 Check angles 05:47:47 SkyScan query 05:47:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.275<-15885 Statuses=0008 0009 05:47:47 Msec=3000 True Az=176.01 Ze=-58.275 Az status=0008 Ze status=0009 05:47:47 Check angles 05:47:47 SkyScan query 05:47:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 05:47:48 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 05:47:48 Message to Master queued w/err=0: serial=264398 error=0 05:47:53 Received message from Master: op=Filter serial=264399 05:47:53 Color wheel filter change from 0 to 0 05:47:53 FLIGetFilterPos err=0 currentPosition=0 05:47:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:53 Filter is already there-color wheel unchanged 05:47:53 Received message from Master: op=Shutter serial=264400 05:47:53 Shutter LASER close 05:47:53 Received message from Camera: op=State serial=264402 05:47:53 GetSingleValue result=40 Value=cccccccc 05:47:53 SkyScan query 05:47:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:47:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:54 Parameters OK 05:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:54 Set A/D data flow result=40 05:47:54 Set A/D channel type result=40 05:47:54 Set A/D encoding result=40 05:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:54 Set channel filter=0.000000e+000 result=40 05:47:54 Config A/D Result=40 05:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:54 Get A/D filter: -9.255963e+061 result=40 05:47:54 Get A/D value=-858993460 result=40 05:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:54 Parameters OK 05:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:54 Set A/D data flow result=40 05:47:54 Set A/D channel type result=40 05:47:54 Set A/D encoding result=40 05:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:54 Set channel filter=0.000000e+000 result=40 05:47:54 Config A/D Result=40 05:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:54 Get A/D filter: -9.255963e+061 result=40 05:47:54 Get A/D value=-858993460 result=40 05:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:54 Aux= 05:47:54 Message to Camera, serial 264402 queued 05:48:31 Received message from Master: op=PointingHead serial=264415 05:48:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:48:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:48:31 Point started: ret=0 05:48:31 point_skyscan result=0 05:48:32 Check angles 05:48:32 SkyScan query 05:48:32 SkyScan query done: ret=0 az=152.49<-10166 ze=-21.255<-13417 Statuses=0009 0009 05:48:32 Msec=0 True Az=152.49 Ze=-21.255 Az status=0009 Ze status=0009 05:48:32 Check angles 05:48:32 SkyScan query 05:48:33 SkyScan query done: ret=0 az=134.97<-8998 ze=-0.33<-12022 Statuses=0009 0009 05:48:33 Msec=750 True Az=134.97 Ze=-0.33 Az status=0009 Ze status=0009 05:48:33 Check angles 05:48:33 SkyScan query 05:48:34 SkyScan query done: ret=0 az=117.015<-7801 ze=21.09<-10594 Statuses=0009 0009 05:48:34 Msec=1500 True Az=117.015 Ze=21.09 Az status=0009 Ze status=0009 05:48:34 Check angles 05:48:34 SkyScan query 05:48:35 SkyScan query done: ret=0 az=99.6<-6640 ze=41.985<-9201 Statuses=0009 0009 05:48:35 Msec=2250 True Az=99.6 Ze=41.985 Az status=0009 Ze status=0009 05:48:35 Check angles 05:48:35 SkyScan query 05:48:35 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 05:48:35 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 05:48:35 Check angles 05:48:35 SkyScan query 05:48:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:48:36 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:48:36 Message to Master queued w/err=0: serial=264415 error=0 05:48:41 Received message from Master: op=Filter serial=264416 05:48:41 Color wheel filter change from 0 to 0 05:48:41 FLIGetFilterPos err=0 currentPosition=0 05:48:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:41 Filter is already there-color wheel unchanged 05:48:41 Received message from Master: op=Shutter serial=264417 05:48:41 Shutter LASER close 05:48:41 Received message from Camera: op=State serial=264419 05:48:41 GetSingleValue result=40 Value=cccccccc 05:48:41 SkyScan query 05:48:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:48:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:42 Parameters OK 05:48:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:42 Set A/D data flow result=40 05:48:42 Set A/D channel type result=40 05:48:42 Set A/D encoding result=40 05:48:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:42 Set channel filter=0.000000e+000 result=40 05:48:42 Config A/D Result=40 05:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:42 Get A/D filter: -9.255963e+061 result=40 05:48:42 Get A/D value=-858993460 result=40 05:48:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:42 Parameters OK 05:48:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:42 Set A/D data flow result=40 05:48:42 Set A/D channel type result=40 05:48:42 Set A/D encoding result=40 05:48:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:42 Set channel filter=0.000000e+000 result=40 05:48:42 Config A/D Result=40 05:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:42 Get A/D filter: -9.255963e+061 result=40 05:48:42 Get A/D value=-858993460 result=40 05:48:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:42 Aux= 05:48:42 Message to Camera, serial 264419 queued 05:49:19 Received message from Master: op=PointingHead serial=264432 05:49:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:49:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:49:19 Point started: ret=0 05:49:19 point_skyscan result=0 05:49:20 Check angles 05:49:20 SkyScan query 05:49:21 SkyScan query done: ret=0 az=85.995<-5733 ze=21.87<-10542 Statuses=0008 0009 05:49:21 Msec=0 True Az=85.995 Ze=21.87 Az status=0008 Ze status=0009 05:49:21 Check angles 05:49:21 SkyScan query 05:49:21 SkyScan query done: ret=0 az=85.995<-5733 ze=0.945<-11937 Statuses=0008 0009 05:49:21 Msec=750 True Az=85.995 Ze=0.945 Az status=0008 Ze status=0009 05:49:21 Check angles 05:49:21 SkyScan query 05:49:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.01<-13334 Statuses=0008 0009 05:49:22 Msec=1500 True Az=85.995 Ze=-20.01 Az status=0008 Ze status=0009 05:49:22 Check angles 05:49:22 SkyScan query 05:49:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.95<-14730 Statuses=0008 0009 05:49:23 Msec=2250 True Az=85.995 Ze=-40.95 Az status=0008 Ze status=0009 05:49:23 Check angles 05:49:23 SkyScan query 05:49:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:49:24 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:49:24 Message to Master queued w/err=0: serial=264432 error=0 05:49:29 Received message from Master: op=Filter serial=264433 05:49:29 Color wheel filter change from 0 to 0 05:49:29 FLIGetFilterPos err=0 currentPosition=0 05:49:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:29 Filter is already there-color wheel unchanged 05:49:29 Received message from Master: op=Shutter serial=264434 05:49:29 Shutter LASER close 05:49:29 Received message from Camera: op=State serial=264436 05:49:29 GetSingleValue result=40 Value=cccccccc 05:49:29 SkyScan query 05:49:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:49:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:29 Parameters OK 05:49:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:29 Set A/D data flow result=40 05:49:29 Set A/D channel type result=40 05:49:29 Set A/D encoding result=40 05:49:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:29 Set channel filter=0.000000e+000 result=40 05:49:29 Config A/D Result=40 05:49:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:29 Get A/D filter: -9.255963e+061 result=40 05:49:29 Get A/D value=-858993460 result=40 05:49:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:29 Parameters OK 05:49:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:29 Set A/D data flow result=40 05:49:29 Set A/D channel type result=40 05:49:29 Set A/D encoding result=40 05:49:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:29 Set channel filter=0.000000e+000 result=40 05:49:29 Config A/D Result=40 05:49:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:29 Get A/D filter: -9.255963e+061 result=40 05:49:29 Get A/D value=-858993460 result=40 05:49:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:29 Aux= 05:49:29 Message to Camera, serial 264436 queued 05:50:06 Received message from Master: op=PointingHead serial=264449 05:50:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:50:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:50:06 Point started: ret=0 05:50:06 point_skyscan result=0 05:50:07 Check angles 05:50:07 SkyScan query 05:50:08 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.21<-17414 Statuses=0009 0009 05:50:08 Msec=0 True Az=108.9 Ze=-81.21 Az status=0009 Ze status=0009 05:50:08 Check angles 05:50:08 SkyScan query 05:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 05:50:09 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 05:50:09 Check angles 05:50:09 SkyScan query 05:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 05:50:09 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 05:50:09 Check angles 05:50:09 SkyScan query 05:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.09<-21606 Statuses=0008 0009 05:50:10 Msec=2250 True Az=112.995 Ze=-144.09 Az status=0008 Ze status=0009 05:50:10 Check angles 05:50:10 SkyScan query 05:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.045<-23003 Statuses=0008 0009 05:50:11 Msec=3000 True Az=112.995 Ze=-165.045 Az status=0008 Ze status=0009 05:50:11 Check angles 05:50:11 SkyScan query 05:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:50:12 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:50:12 Message to Master queued w/err=0: serial=264449 error=0 05:50:17 Received message from Master: op=Filter serial=264450 05:50:17 Color wheel filter change from 0 to 0 05:50:17 FLIGetFilterPos err=0 currentPosition=0 05:50:17 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:17 Filter is already there-color wheel unchanged 05:50:17 Received message from Master: op=Shutter serial=264451 05:50:17 Shutter LASER open 05:50:17 Received message from Camera: op=State serial=264453 05:50:17 GetSingleValue result=40 Value=cccccccc 05:50:17 SkyScan query 05:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:50:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:17 Parameters OK 05:50:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:17 Set A/D data flow result=40 05:50:17 Set A/D channel type result=40 05:50:17 Set A/D encoding result=40 05:50:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:17 Set channel filter=0.000000e+000 result=40 05:50:17 Config A/D Result=40 05:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:17 Get A/D filter: -9.255963e+061 result=40 05:50:17 Get A/D value=-858993460 result=40 05:50:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:17 Parameters OK 05:50:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:17 Set A/D data flow result=40 05:50:17 Set A/D channel type result=40 05:50:17 Set A/D encoding result=40 05:50:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:17 Set channel filter=0.000000e+000 result=40 05:50:17 Config A/D Result=40 05:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:17 Get A/D filter: -9.255963e+061 result=40 05:50:17 Get A/D value=-858993460 result=40 05:50:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:17 Aux= 05:50:17 Message to Camera, serial 264453 queued 05:50:26 Received message from Master: op=Shutter serial=264463 05:50:26 Shutter LASER close 05:50:26 Received message from Master: op=PointingHead serial=264467 05:50:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:50:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:50:27 Point started: ret=0 05:50:27 point_skyscan result=0 05:50:27 Check angles 05:50:27 SkyScan query 05:50:28 SkyScan query done: ret=0 az=90.15<-6010 ze=157.425<-1505 Statuses=0009 0009 05:50:28 Msec=0 True Az=90.15 Ze=157.425 Az status=0009 Ze status=0009 05:50:28 Check angles 05:50:28 SkyScan query 05:50:29 SkyScan query done: ret=0 az=72.675<-4845 ze=136.47<-2902 Statuses=0009 0009 05:50:29 Msec=750 True Az=72.675 Ze=136.47 Az status=0009 Ze status=0009 05:50:29 Check angles 05:50:29 SkyScan query 05:50:30 SkyScan query done: ret=0 az=55.215<-3681 ze=115.575<-4295 Statuses=0009 0009 05:50:30 Msec=1500 True Az=55.215 Ze=115.575 Az status=0009 Ze status=0009 05:50:30 Check angles 05:50:30 SkyScan query 05:50:30 SkyScan query done: ret=0 az=40.98<-2732 ze=94.17<-5722 Statuses=0009 0009 05:50:30 Msec=2250 True Az=40.98 Ze=94.17 Az status=0009 Ze status=0009 05:50:30 Check angles 05:50:30 SkyScan query 05:50:31 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 05:50:31 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 05:50:31 Check angles 05:50:31 SkyScan query 05:50:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 05:50:32 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 05:50:32 Check angles 05:50:32 SkyScan query 05:50:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:50:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:50:33 Message to Master queued w/err=0: serial=264467 error=0 05:50:38 Received message from Master: op=Filter serial=264468 05:50:38 Color wheel filter change from 0 to 0 05:50:38 FLIGetFilterPos err=0 currentPosition=0 05:50:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:38 Filter is already there-color wheel unchanged 05:50:38 Received message from Master: op=Shutter serial=264469 05:50:38 Shutter LASER close 05:50:38 Received message from Camera: op=State serial=264471 05:50:38 GetSingleValue result=40 Value=cccccccc 05:50:38 SkyScan query 05:50:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:50:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:38 Parameters OK 05:50:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:38 Set A/D data flow result=40 05:50:38 Set A/D channel type result=40 05:50:38 Set A/D encoding result=40 05:50:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:38 Set channel filter=0.000000e+000 result=40 05:50:38 Config A/D Result=40 05:50:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:38 Get A/D filter: -9.255963e+061 result=40 05:50:38 Get A/D value=-858993460 result=40 05:50:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:38 Parameters OK 05:50:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:38 Set A/D data flow result=40 05:50:38 Set A/D channel type result=40 05:50:38 Set A/D encoding result=40 05:50:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:38 Set channel filter=0.000000e+000 result=40 05:50:38 Config A/D Result=40 05:50:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:38 Get A/D filter: -9.255963e+061 result=40 05:50:38 Get A/D value=-858993460 result=40 05:50:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:38 Aux= 05:50:38 Message to Camera, serial 264471 queued 05:51:15 Received message from Master: op=PointingHead serial=264483 05:51:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:51:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:51:15 Point started: ret=0 05:51:15 point_skyscan result=0 05:51:16 Check angles 05:51:16 SkyScan query 05:51:16 SkyScan query done: ret=0 az=40.995<-2733 ze=21.93<-10538 Statuses=0008 0009 05:51:16 Msec=0 True Az=40.995 Ze=21.93 Az status=0008 Ze status=0009 05:51:16 Check angles 05:51:16 SkyScan query 05:51:17 SkyScan query done: ret=0 az=40.995<-2733 ze=0.99<-11934 Statuses=0008 0009 05:51:17 Msec=750 True Az=40.995 Ze=0.99 Az status=0008 Ze status=0009 05:51:17 Check angles 05:51:17 SkyScan query 05:51:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-19.95<-13330 Statuses=0008 0009 05:51:18 Msec=1500 True Az=40.995 Ze=-19.95 Az status=0008 Ze status=0009 05:51:18 Check angles 05:51:18 SkyScan query 05:51:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.52<-14568 Statuses=0008 0009 05:51:18 Msec=2250 True Az=40.995 Ze=-38.52 Az status=0008 Ze status=0009 05:51:19 Check angles 05:51:19 SkyScan query 05:51:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 05:51:19 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 05:51:19 Message to Master queued w/err=0: serial=264483 error=0 05:51:24 Received message from Master: op=Filter serial=264484 05:51:24 Color wheel filter change from 0 to 0 05:51:24 FLIGetFilterPos err=0 currentPosition=0 05:51:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:24 Filter is already there-color wheel unchanged 05:51:24 Received message from Master: op=Shutter serial=264485 05:51:24 Shutter LASER close 05:51:24 Received message from Camera: op=State serial=264487 05:51:24 GetSingleValue result=40 Value=cccccccc 05:51:24 SkyScan query 05:51:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:51:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:25 Parameters OK 05:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:25 Set A/D data flow result=40 05:51:25 Set A/D channel type result=40 05:51:25 Set A/D encoding result=40 05:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:25 Set channel filter=0.000000e+000 result=40 05:51:25 Config A/D Result=40 05:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:25 Get A/D filter: -9.255963e+061 result=40 05:51:25 Get A/D value=-858993460 result=40 05:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:25 Parameters OK 05:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:25 Set A/D data flow result=40 05:51:25 Set A/D channel type result=40 05:51:25 Set A/D encoding result=40 05:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:25 Set channel filter=0.000000e+000 result=40 05:51:25 Config A/D Result=40 05:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:25 Get A/D filter: -9.255963e+061 result=40 05:51:25 Get A/D value=-858993460 result=40 05:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:25 Aux= 05:51:25 Message to Camera, serial 264487 queued 05:52:02 Received message from Master: op=PointingHead serial=264500 05:52:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:52:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:52:02 Point started: ret=0 05:52:02 point_skyscan result=0 05:52:03 Check angles 05:52:03 SkyScan query 05:52:04 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.7<-16580 Statuses=0009 0009 05:52:04 Msec=0 True Az=64.41 Ze=-68.7 Az status=0009 Ze status=0009 05:52:04 Check angles 05:52:04 SkyScan query 05:52:04 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.67<-17978 Statuses=0009 0009 05:52:04 Msec=750 True Az=81.84 Ze=-89.67 Az status=0009 Ze status=0009 05:52:04 Check angles 05:52:04 SkyScan query 05:52:05 SkyScan query done: ret=0 az=99.345<-6623 ze=-110.655<-19377 Statuses=0009 0009 05:52:05 Msec=1500 True Az=99.345 Ze=-110.655 Az status=0009 Ze status=0009 05:52:05 Check angles 05:52:05 SkyScan query 05:52:06 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.55<-20770 Statuses=0009 0009 05:52:06 Msec=2250 True Az=116.745 Ze=-131.55 Az status=0009 Ze status=0009 05:52:06 Check angles 05:52:06 SkyScan query 05:52:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 05:52:07 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 05:52:07 Check angles 05:52:07 SkyScan query 05:52:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 05:52:07 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 05:52:07 Message to Master queued w/err=0: serial=264500 error=0 05:52:12 Received message from Master: op=Filter serial=264501 05:52:12 Color wheel filter change from 0 to 0 05:52:12 FLIGetFilterPos err=0 currentPosition=0 05:52:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:12 Filter is already there-color wheel unchanged 05:52:12 Received message from Master: op=Shutter serial=264502 05:52:12 Shutter LASER close 05:52:12 Received message from Camera: op=State serial=264504 05:52:12 GetSingleValue result=40 Value=cccccccc 05:52:12 SkyScan query 05:52:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:52:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:13 Parameters OK 05:52:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:13 Set A/D data flow result=40 05:52:13 Set A/D channel type result=40 05:52:13 Set A/D encoding result=40 05:52:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:13 Set channel filter=0.000000e+000 result=40 05:52:13 Config A/D Result=40 05:52:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:13 Get A/D filter: -9.255963e+061 result=40 05:52:13 Get A/D value=-858993460 result=40 05:52:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:13 Parameters OK 05:52:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:13 Set A/D data flow result=40 05:52:13 Set A/D channel type result=40 05:52:13 Set A/D encoding result=40 05:52:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:13 Set channel filter=0.000000e+000 result=40 05:52:13 Config A/D Result=40 05:52:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:13 Get A/D filter: -9.255963e+061 result=40 05:52:13 Get A/D value=-858993460 result=40 05:52:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:13 Aux= 05:52:13 Message to Camera, serial 264504 queued 05:52:50 Received message from Master: op=PointingHead serial=264517 05:52:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:52:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:52:50 Point started: ret=0 05:52:50 point_skyscan result=0 05:52:51 Check angles 05:52:51 SkyScan query 05:52:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 05:52:52 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 05:52:52 Check angles 05:52:52 SkyScan query 05:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:52:52 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:52:52 Message to Master queued w/err=0: serial=264517 error=0 05:52:57 Received message from Master: op=Filter serial=264518 05:52:57 Color wheel filter change from 0 to 0 05:52:57 FLIGetFilterPos err=0 currentPosition=0 05:52:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:57 Filter is already there-color wheel unchanged 05:52:57 Received message from Master: op=Shutter serial=264519 05:52:57 Shutter LASER open 05:52:58 Received message from Camera: op=State serial=264521 05:52:58 GetSingleValue result=40 Value=cccccccc 05:52:58 SkyScan query 05:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:52:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:58 Parameters OK 05:52:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:58 Set A/D data flow result=40 05:52:58 Set A/D channel type result=40 05:52:58 Set A/D encoding result=40 05:52:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:58 Set channel filter=0.000000e+000 result=40 05:52:58 Config A/D Result=40 05:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:58 Get A/D filter: -9.255963e+061 result=40 05:52:58 Get A/D value=-858993460 result=40 05:52:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:58 Parameters OK 05:52:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:58 Set A/D data flow result=40 05:52:58 Set A/D channel type result=40 05:52:58 Set A/D encoding result=40 05:52:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:58 Set channel filter=0.000000e+000 result=40 05:52:58 Config A/D Result=40 05:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:58 Get A/D filter: -9.255963e+061 result=40 05:52:58 Get A/D value=-858993460 result=40 05:52:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:58 Aux= 05:52:58 Message to Camera, serial 264521 queued 05:53:07 Received message from Master: op=Shutter serial=264531 05:53:07 Shutter LASER close 05:53:07 Received message from Master: op=PointingHead serial=264535 05:53:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:53:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:53:08 Point started: ret=0 05:53:08 point_skyscan result=0 05:53:08 Check angles 05:53:08 SkyScan query 05:53:09 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.385<-21559 Statuses=0009 0009 05:53:09 Msec=0 True Az=135.885 Ze=-143.385 Az status=0009 Ze status=0009 05:53:09 Check angles 05:53:09 SkyScan query 05:53:10 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.385<-20159 Statuses=0009 0009 05:53:10 Msec=750 True Az=153.42 Ze=-122.385 Az status=0009 Ze status=0009 05:53:10 Check angles 05:53:10 SkyScan query 05:53:10 SkyScan query done: ret=0 az=171.18<-11412 ze=-100.995<-18733 Statuses=0009 0009 05:53:10 Msec=1500 True Az=171.18 Ze=-100.995 Az status=0009 Ze status=0009 05:53:11 Check angles 05:53:11 SkyScan query 05:53:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.115<-17341 Statuses=0008 0009 05:53:11 Msec=2250 True Az=176.01 Ze=-80.115 Az status=0008 Ze status=0009 05:53:11 Check angles 05:53:11 SkyScan query 05:53:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.1<-15940 Statuses=0008 0009 05:53:12 Msec=3000 True Az=175.995 Ze=-59.1 Az status=0008 Ze status=0009 05:53:12 Check angles 05:53:12 SkyScan query 05:53:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:53:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:53:13 Message to Master queued w/err=0: serial=264535 error=0 05:53:18 Received message from Master: op=Filter serial=264536 05:53:18 Color wheel filter change from 0 to 0 05:53:18 FLIGetFilterPos err=0 currentPosition=0 05:53:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:18 Filter is already there-color wheel unchanged 05:53:18 Received message from Master: op=Shutter serial=264537 05:53:18 Shutter LASER close 05:53:18 Received message from Camera: op=State serial=264539 05:53:18 GetSingleValue result=40 Value=cccccccc 05:53:18 SkyScan query 05:53:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:53:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:19 Parameters OK 05:53:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:19 Set A/D data flow result=40 05:53:19 Set A/D channel type result=40 05:53:19 Set A/D encoding result=40 05:53:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:19 Set channel filter=0.000000e+000 result=40 05:53:19 Config A/D Result=40 05:53:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:19 Get A/D filter: -9.255963e+061 result=40 05:53:19 Get A/D value=-858993460 result=40 05:53:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:19 Parameters OK 05:53:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:19 Set A/D data flow result=40 05:53:19 Set A/D channel type result=40 05:53:19 Set A/D encoding result=40 05:53:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:19 Set channel filter=0.000000e+000 result=40 05:53:19 Config A/D Result=40 05:53:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:19 Get A/D filter: -9.255963e+061 result=40 05:53:19 Get A/D value=-858993460 result=40 05:53:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:19 Aux= 05:53:19 Message to Camera, serial 264539 queued 05:53:55 Received message from Master: op=PointingHead serial=264552 05:53:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:53:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:53:56 Point started: ret=0 05:53:56 point_skyscan result=0 05:53:57 Check angles 05:53:57 SkyScan query 05:53:57 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.72<-13448 Statuses=0009 0009 05:53:57 Msec=0 True Az=152.97 Ze=-21.72 Az status=0009 Ze status=0009 05:53:57 Check angles 05:53:57 SkyScan query 05:53:58 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.705<-12047 Statuses=0009 0009 05:53:58 Msec=750 True Az=135.405 Ze=-0.705 Az status=0009 Ze status=0009 05:53:58 Check angles 05:53:58 SkyScan query 05:53:59 SkyScan query done: ret=0 az=117.87<-7858 ze=20.22<-10652 Statuses=0009 0009 05:53:59 Msec=1500 True Az=117.87 Ze=20.22 Az status=0009 Ze status=0009 05:53:59 Check angles 05:53:59 SkyScan query 05:53:59 SkyScan query done: ret=0 az=100.545<-6703 ze=41.205<-9253 Statuses=0009 0009 05:53:59 Msec=2250 True Az=100.545 Ze=41.205 Az status=0009 Ze status=0009 05:54:00 Check angles 05:54:00 SkyScan query 05:54:00 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 05:54:00 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 05:54:00 Check angles 05:54:00 SkyScan query 05:54:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:54:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:54:01 Message to Master queued w/err=0: serial=264552 error=0 05:54:06 Received message from Master: op=Filter serial=264553 05:54:06 Color wheel filter change from 0 to 0 05:54:06 FLIGetFilterPos err=0 currentPosition=0 05:54:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:06 Filter is already there-color wheel unchanged 05:54:06 Received message from Master: op=Shutter serial=264554 05:54:06 Shutter LASER close 05:54:06 Received message from Camera: op=State serial=264556 05:54:06 GetSingleValue result=40 Value=cccccccc 05:54:06 SkyScan query 05:54:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:54:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:07 Parameters OK 05:54:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:07 Set A/D data flow result=40 05:54:07 Set A/D channel type result=40 05:54:07 Set A/D encoding result=40 05:54:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:07 Set channel filter=0.000000e+000 result=40 05:54:07 Config A/D Result=40 05:54:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:07 Get A/D filter: -9.255963e+061 result=40 05:54:07 Get A/D value=-858993460 result=40 05:54:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:07 Parameters OK 05:54:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:07 Set A/D data flow result=40 05:54:07 Set A/D channel type result=40 05:54:07 Set A/D encoding result=40 05:54:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:07 Set channel filter=0.000000e+000 result=40 05:54:07 Config A/D Result=40 05:54:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:07 Get A/D filter: -9.255963e+061 result=40 05:54:07 Get A/D value=-858993460 result=40 05:54:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:07 Aux= 05:54:07 Message to Camera, serial 264556 queued 05:54:44 Received message from Master: op=PointingHead serial=264569 05:54:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:54:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:54:44 Point started: ret=0 05:54:44 point_skyscan result=0 05:54:45 Check angles 05:54:45 SkyScan query 05:54:45 SkyScan query done: ret=0 az=85.98<-5732 ze=21.345<-10577 Statuses=0008 0009 05:54:45 Msec=0 True Az=85.98 Ze=21.345 Az status=0008 Ze status=0009 05:54:46 Check angles 05:54:46 SkyScan query 05:54:46 SkyScan query done: ret=0 az=85.995<-5733 ze=0.42<-11972 Statuses=0008 0009 05:54:46 Msec=750 True Az=85.995 Ze=0.42 Az status=0008 Ze status=0009 05:54:46 Check angles 05:54:46 SkyScan query 05:54:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.55<-13370 Statuses=0008 0009 05:54:47 Msec=1500 True Az=85.995 Ze=-20.55 Az status=0008 Ze status=0009 05:54:47 Check angles 05:54:47 SkyScan query 05:54:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.505<-14767 Statuses=0008 0009 05:54:48 Msec=2250 True Az=85.995 Ze=-41.505 Az status=0008 Ze status=0009 05:54:48 Check angles 05:54:48 SkyScan query 05:54:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:54:48 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:54:48 Message to Master queued w/err=0: serial=264569 error=0 05:54:53 Received message from Master: op=Filter serial=264570 05:54:53 Color wheel filter change from 0 to 0 05:54:53 FLIGetFilterPos err=0 currentPosition=0 05:54:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:53 Filter is already there-color wheel unchanged 05:54:54 Received message from Master: op=Shutter serial=264571 05:54:54 Shutter LASER close 05:54:54 Received message from Camera: op=State serial=264573 05:54:54 GetSingleValue result=40 Value=cccccccc 05:54:54 SkyScan query 05:54:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:54:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:54 Parameters OK 05:54:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:54 Set A/D data flow result=40 05:54:54 Set A/D channel type result=40 05:54:54 Set A/D encoding result=40 05:54:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:54 Set channel filter=0.000000e+000 result=40 05:54:54 Config A/D Result=40 05:54:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:54 Get A/D filter: -9.255963e+061 result=40 05:54:54 Get A/D value=-858993460 result=40 05:54:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:54 Parameters OK 05:54:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:54 Set A/D data flow result=40 05:54:54 Set A/D channel type result=40 05:54:54 Set A/D encoding result=40 05:54:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:54 Set channel filter=0.000000e+000 result=40 05:54:54 Config A/D Result=40 05:54:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:54 Get A/D filter: -9.255963e+061 result=40 05:54:54 Get A/D value=-858993460 result=40 05:54:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:54 Aux= 05:54:54 Message to Camera, serial 264573 queued 05:55:30 Received message from Master: op=PointingHead serial=264585 05:55:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:55:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:55:30 Point started: ret=0 05:55:30 point_skyscan result=0 05:55:31 Check angles 05:55:31 SkyScan query 05:55:32 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.15<-17410 Statuses=0009 0009 05:55:32 Msec=0 True Az=108.945 Ze=-81.15 Az status=0009 Ze status=0009 05:55:32 Check angles 05:55:32 SkyScan query 05:55:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 05:55:33 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 05:55:33 Check angles 05:55:33 SkyScan query 05:55:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 05:55:33 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 05:55:33 Check angles 05:55:33 SkyScan query 05:55:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 05:55:34 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 05:55:34 Check angles 05:55:34 SkyScan query 05:55:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.81<-23054 Statuses=0008 0009 05:55:35 Msec=3000 True Az=112.995 Ze=-165.81 Az status=0008 Ze status=0009 05:55:35 Check angles 05:55:35 SkyScan query 05:55:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:55:36 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:55:36 Message to Master queued w/err=0: serial=264585 error=0 05:55:41 Received message from Master: op=Filter serial=264586 05:55:41 Color wheel filter change from 0 to 0 05:55:41 FLIGetFilterPos err=0 currentPosition=0 05:55:41 FLIGetStepsRemaining err=0 RemainingSteps=0 [UTC 2018-12-19 05:55:41] 05:55:41 Filter is already there-color wheel unchanged 05:55:41 Received message from Master: op=Shutter serial=264587 05:55:41 Shutter LASER open 05:55:41 Received message from Camera: op=State serial=264589 05:55:41 GetSingleValue result=40 Value=cccccccc 05:55:41 SkyScan query 05:55:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:55:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:42 Parameters OK 05:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:42 Set A/D data flow result=40 05:55:42 Set A/D channel type result=40 05:55:42 Set A/D encoding result=40 05:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:42 Set channel filter=0.000000e+000 result=40 05:55:42 Config A/D Result=40 05:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:42 Get A/D filter: -9.255963e+061 result=40 05:55:42 Get A/D value=-858993460 result=40 05:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:42 Parameters OK 05:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:42 Set A/D data flow result=40 05:55:42 Set A/D channel type result=40 05:55:42 Set A/D encoding result=40 05:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:42 Set channel filter=0.000000e+000 result=40 05:55:42 Config A/D Result=40 05:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:42 Get A/D filter: -9.255963e+061 result=40 05:55:42 Get A/D value=-858993460 result=40 05:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:42 Aux= 05:55:42 Message to Camera, serial 264589 queued 05:55:50 Received message from Master: op=Shutter serial=264599 05:55:50 Shutter LASER close 05:55:50 Received message from Master: op=PointingHead serial=264603 05:55:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:55:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:55:51 Point started: ret=0 05:55:51 point_skyscan result=0 05:55:52 Check angles 05:55:52 SkyScan query 05:55:52 SkyScan query done: ret=0 az=90.15<-6010 ze=157.515<-1499 Statuses=0009 0009 05:55:52 Msec=0 True Az=90.15 Ze=157.515 Az status=0009 Ze status=0009 [UTC 2018-12-19 05:55:52] 05:55:52 Check angles 05:55:52 SkyScan query 05:55:53 SkyScan query done: ret=0 az=72.675<-4845 ze=136.545<-2897 Statuses=0009 0009 05:55:53 Msec=750 True Az=72.675 Ze=136.545 Az status=0009 Ze status=0009 05:55:53 Check angles 05:55:53 SkyScan query 05:55:54 SkyScan query done: ret=0 az=55.26<-3684 ze=115.635<-4291 Statuses=0009 0009 05:55:54 Msec=1500 True Az=55.26 Ze=115.635 Az status=0009 Ze status=0009 05:55:54 Check angles 05:55:54 SkyScan query 05:55:54 SkyScan query done: ret=0 az=40.995<-2733 ze=94.635<-5691 Statuses=0009 0009 05:55:54 Msec=2250 True Az=40.995 Ze=94.635 Az status=0009 Ze status=0009 05:55:55 Check angles 05:55:55 SkyScan query 05:55:55 SkyScan query done: ret=0 az=40.98<-2732 ze=73.725<-7085 Statuses=0008 0009 05:55:55 Msec=3000 True Az=40.98 Ze=73.725 Az status=0008 Ze status=0009 05:55:55 Check angles 05:55:55 SkyScan query 05:55:56 SkyScan query done: ret=0 az=40.995<-2733 ze=53.025<-8465 Statuses=0008 0009 05:55:56 Msec=3750 True Az=40.995 Ze=53.025 Az status=0008 Ze status=0009 05:55:56 Check angles 05:55:56 SkyScan query 05:55:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:55:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:55:57 Message to Master queued w/err=0: serial=264603 error=0 05:56:02 Received message from Master: op=Filter serial=264604 05:56:02 Color wheel filter change from 0 to 0 05:56:02 FLIGetFilterPos err=0 currentPosition=0 05:56:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:02 Filter is already there-color wheel unchanged 05:56:02 Received message from Master: op=Shutter serial=264605 05:56:02 Shutter LASER close 05:56:02 Received message from Camera: op=State serial=264607 05:56:02 GetSingleValue result=40 Value=cccccccc 05:56:02 SkyScan query 05:56:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:56:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:03 Parameters OK 05:56:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:03 Set A/D data flow result=40 05:56:03 Set A/D channel type result=40 05:56:03 Set A/D encoding result=40 05:56:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:03 Set channel filter=0.000000e+000 result=40 05:56:03 Config A/D Result=40 05:56:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:03 Get A/D filter: -9.255963e+061 result=40 05:56:03 Get A/D value=-858993460 result=40 05:56:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:03 Parameters OK 05:56:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:03 Set A/D data flow result=40 05:56:03 Set A/D channel type result=40 05:56:03 Set A/D encoding result=40 05:56:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:03 Set channel filter=0.000000e+000 result=40 05:56:03 Config A/D Result=40 05:56:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:03 Get A/D filter: -9.255963e+061 result=40 05:56:03 Get A/D value=-858993460 result=40 05:56:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:03 Aux= 05:56:03 Message to Camera, serial 264607 queued 05:56:40 Received message from Master: op=PointingHead serial=264620 05:56:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:56:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:56:40 Point started: ret=0 05:56:40 point_skyscan result=0 05:56:41 Check angles 05:56:41 SkyScan query 05:56:41 SkyScan query done: ret=0 az=40.995<-2733 ze=21.525<-10565 Statuses=0008 0009 05:56:41 Msec=0 True Az=40.995 Ze=21.525 Az status=0008 Ze status=0009 05:56:41 Check angles 05:56:41 SkyScan query 05:56:42 SkyScan query done: ret=0 az=40.995<-2733 ze=0.555<-11963 Statuses=0008 0009 05:56:42 Msec=750 True Az=40.995 Ze=0.555 Az status=0008 Ze status=0009 05:56:42 Check angles 05:56:42 SkyScan query 05:56:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.835<-13389 Statuses=0008 0009 05:56:43 Msec=1500 True Az=40.995 Ze=-20.835 Az status=0008 Ze status=0009 05:56:43 Check angles 05:56:43 SkyScan query 05:56:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 05:56:43 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 05:56:44 Check angles 05:56:44 SkyScan query 05:56:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:56:44 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:56:44 Message to Master queued w/err=0: serial=264620 error=0 05:56:49 Received message from Master: op=Filter serial=264621 05:56:49 Color wheel filter change from 0 to 0 05:56:49 FLIGetFilterPos err=0 currentPosition=0 05:56:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:49 Filter is already there-color wheel unchanged 05:56:49 Received message from Master: op=Shutter serial=264622 05:56:49 Shutter LASER close 05:56:49 Received message from Camera: op=State serial=264624 05:56:49 GetSingleValue result=40 Value=cccccccc 05:56:49 SkyScan query 05:56:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:56:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:50 Parameters OK 05:56:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:50 Set A/D data flow result=40 05:56:50 Set A/D channel type result=40 05:56:50 Set A/D encoding result=40 05:56:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:50 Set channel filter=0.000000e+000 result=40 05:56:50 Config A/D Result=40 05:56:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:50 Get A/D filter: -9.255963e+061 result=40 05:56:50 Get A/D value=-858993460 result=40 05:56:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:50 Parameters OK 05:56:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:50 Set A/D data flow result=40 05:56:50 Set A/D channel type result=40 05:56:50 Set A/D encoding result=40 05:56:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:50 Set channel filter=0.000000e+000 result=40 05:56:50 Config A/D Result=40 05:56:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:50 Get A/D filter: -9.255963e+061 result=40 05:56:50 Get A/D value=-858993460 result=40 05:56:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:50 Aux= 05:56:50 Message to Camera, serial 264624 queued 05:57:27 Received message from Master: op=PointingHead serial=264637 05:57:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:57:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:57:27 Point started: ret=0 05:57:27 point_skyscan result=0 05:57:28 Check angles 05:57:28 SkyScan query 05:57:29 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.235<-16549 Statuses=0009 0009 05:57:29 Msec=0 True Az=63.96 Ze=-68.235 Az status=0009 Ze status=0009 05:57:29 Check angles 05:57:29 SkyScan query 05:57:29 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.655<-17977 Statuses=0009 0009 05:57:29 Msec=750 True Az=81.78 Ze=-89.655 Az status=0009 Ze status=0009 05:57:29 Check angles 05:57:29 SkyScan query 05:57:30 SkyScan query done: ret=0 az=99.645<-6643 ze=-111.03<-19402 Statuses=0009 0009 05:57:30 Msec=1500 True Az=99.645 Ze=-111.03 Az status=0009 Ze status=0009 05:57:30 Check angles 05:57:30 SkyScan query 05:57:31 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.97<-20798 Statuses=0009 0009 05:57:31 Msec=2250 True Az=117.09 Ze=-131.97 Az status=0009 Ze status=0009 05:57:31 Check angles 05:57:31 SkyScan query 05:57:32 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 05:57:32 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 05:57:32 Check angles 05:57:32 SkyScan query 05:57:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 05:57:32 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 05:57:32 Message to Master queued w/err=0: serial=264637 error=0 05:57:37 Received message from Master: op=Filter serial=264638 05:57:37 Color wheel filter change from 0 to 0 05:57:37 FLIGetFilterPos err=0 currentPosition=0 05:57:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:37 Filter is already there-color wheel unchanged 05:57:37 Received message from Master: op=Shutter serial=264639 05:57:37 Shutter LASER close 05:57:38 Received message from Camera: op=State serial=264641 05:57:38 GetSingleValue result=40 Value=cccccccc 05:57:38 SkyScan query 05:57:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:57:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:38 Parameters OK 05:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:38 Set A/D data flow result=40 05:57:38 Set A/D channel type result=40 05:57:38 Set A/D encoding result=40 05:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:38 Set channel filter=0.000000e+000 result=40 05:57:38 Config A/D Result=40 05:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:38 Get A/D filter: -9.255963e+061 result=40 05:57:38 Get A/D value=-858993460 result=40 05:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:38 Parameters OK 05:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:38 Set A/D data flow result=40 05:57:38 Set A/D channel type result=40 05:57:38 Set A/D encoding result=40 05:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:38 Set channel filter=0.000000e+000 result=40 05:57:38 Config A/D Result=40 05:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:38 Get A/D filter: -9.255963e+061 result=40 05:57:38 Get A/D value=-858993460 result=40 05:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:38 Aux= 05:57:38 Message to Camera, serial 264641 queued 05:58:15 Received message from Master: op=PointingHead serial=264654 05:58:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:58:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:58:15 Point started: ret=0 05:58:15 point_skyscan result=0 05:58:16 Check angles 05:58:16 SkyScan query 05:58:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 05:58:17 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 05:58:17 Check angles 05:58:17 SkyScan query 05:58:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:58:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:58:17 Message to Master queued w/err=0: serial=264654 error=0 05:58:22 Received message from Master: op=Filter serial=264655 05:58:22 Color wheel filter change from 0 to 0 05:58:22 FLIGetFilterPos err=0 currentPosition=0 05:58:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:22 Filter is already there-color wheel unchanged 05:58:23 Received message from Master: op=Shutter serial=264656 05:58:23 Shutter LASER open 05:58:23 Received message from Camera: op=State serial=264658 05:58:23 GetSingleValue result=40 Value=cccccccc 05:58:23 SkyScan query 05:58:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:58:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:23 Parameters OK 05:58:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:23 Set A/D data flow result=40 05:58:23 Set A/D channel type result=40 05:58:23 Set A/D encoding result=40 05:58:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:23 Set channel filter=0.000000e+000 result=40 05:58:23 Config A/D Result=40 05:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:23 Get A/D filter: -9.255963e+061 result=40 05:58:23 Get A/D value=-858993460 result=40 05:58:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:23 Parameters OK 05:58:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:23 Set A/D data flow result=40 05:58:23 Set A/D channel type result=40 05:58:23 Set A/D encoding result=40 05:58:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:23 Set channel filter=0.000000e+000 result=40 05:58:23 Config A/D Result=40 05:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:23 Get A/D filter: -9.255963e+061 result=40 05:58:23 Get A/D value=-858993460 result=40 05:58:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:23 Aux= 05:58:23 Message to Camera, serial 264658 queued 05:58:32 Received message from Master: op=Shutter serial=264668 05:58:32 Shutter LASER close 05:58:32 Received message from Master: op=PointingHead serial=264672 05:58:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:58:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:58:33 Point started: ret=0 05:58:33 point_skyscan result=0 05:58:33 Check angles 05:58:33 SkyScan query 05:58:34 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.845<-21523 Statuses=0009 0009 05:58:34 Msec=0 True Az=136.305 Ze=-142.845 Az status=0009 Ze status=0009 05:58:34 Check angles 05:58:34 SkyScan query 05:58:35 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.89<-20126 Statuses=0009 0009 05:58:35 Msec=750 True Az=153.78 Ze=-121.89 Az status=0009 Ze status=0009 05:58:35 Check angles 05:58:35 SkyScan query 05:58:35 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.89<-18726 Statuses=0009 0009 05:58:35 Msec=1500 True Az=171.36 Ze=-100.89 Az status=0009 Ze status=0009 05:58:36 Check angles 05:58:36 SkyScan query 05:58:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.515<-17301 Statuses=0008 0009 05:58:36 Msec=2250 True Az=176.01 Ze=-79.515 Az status=0008 Ze status=0009 05:58:36 Check angles 05:58:36 SkyScan query 05:58:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.53<-15902 Statuses=0008 0009 05:58:37 Msec=3000 True Az=176.01 Ze=-58.53 Az status=0008 Ze status=0009 05:58:37 Check angles 05:58:37 SkyScan query 05:58:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:58:38 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:58:38 Message to Master queued w/err=0: serial=264672 error=0 05:58:43 Received message from Master: op=Filter serial=264673 05:58:43 Color wheel filter change from 0 to 0 05:58:43 FLIGetFilterPos err=0 currentPosition=0 05:58:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:43 Filter is already there-color wheel unchanged 05:58:43 Received message from Master: op=Shutter serial=264674 05:58:43 Shutter LASER close 05:58:43 Received message from Camera: op=State serial=264676 05:58:43 GetSingleValue result=40 Value=cccccccc 05:58:43 SkyScan query 05:58:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:58:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:44 Parameters OK 05:58:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:44 Set A/D data flow result=40 05:58:44 Set A/D channel type result=40 05:58:44 Set A/D encoding result=40 05:58:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:44 Set channel filter=0.000000e+000 result=40 05:58:44 Config A/D Result=40 05:58:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:44 Get A/D filter: -9.255963e+061 result=40 05:58:44 Get A/D value=-858993460 result=40 05:58:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:44 Parameters OK 05:58:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:44 Set A/D data flow result=40 05:58:44 Set A/D channel type result=40 05:58:44 Set A/D encoding result=40 05:58:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:44 Set channel filter=0.000000e+000 result=40 05:58:44 Config A/D Result=40 05:58:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:44 Get A/D filter: -9.255963e+061 result=40 05:58:44 Get A/D value=-858993460 result=40 05:58:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:44 Aux= 05:58:44 Message to Camera, serial 264676 queued 05:59:21 Received message from Master: op=PointingHead serial=264689 05:59:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:59:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:59:21 Point started: ret=0 05:59:21 point_skyscan result=0 05:59:22 Check angles 05:59:22 SkyScan query 05:59:22 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.93<-13462 Statuses=0009 0009 05:59:22 Msec=0 True Az=153.09 Ze=-21.93 Az status=0009 Ze status=0009 05:59:22 Check angles 05:59:22 SkyScan query 05:59:23 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.84<-12056 Statuses=0009 0009 05:59:23 Msec=750 True Az=135.63 Ze=-0.84 Az status=0009 Ze status=0009 05:59:23 Check angles 05:59:23 SkyScan query 05:59:24 SkyScan query done: ret=0 az=118.11<-7874 ze=19.995<-10667 Statuses=0009 0009 05:59:24 Msec=1500 True Az=118.11 Ze=19.995 Az status=0009 Ze status=0009 05:59:24 Check angles 05:59:24 SkyScan query 05:59:25 SkyScan query done: ret=0 az=100.725<-6715 ze=41.025<-9265 Statuses=0009 0009 05:59:25 Msec=2250 True Az=100.725 Ze=41.025 Az status=0009 Ze status=0009 05:59:25 Check angles 05:59:25 SkyScan query 05:59:25 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 05:59:25 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 05:59:25 Check angles 05:59:25 SkyScan query 05:59:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:59:26 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:59:26 Message to Master queued w/err=0: serial=264689 error=0 05:59:31 Received message from Master: op=Filter serial=264690 05:59:31 Color wheel filter change from 0 to 0 05:59:31 FLIGetFilterPos err=0 currentPosition=0 05:59:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:31 Filter is already there-color wheel unchanged 05:59:31 Received message from Master: op=Shutter serial=264691 05:59:31 Shutter LASER close 05:59:31 Received message from Camera: op=State serial=264693 05:59:31 GetSingleValue result=40 Value=cccccccc 05:59:31 SkyScan query 05:59:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:59:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:32 Parameters OK 05:59:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:32 Set A/D data flow result=40 05:59:32 Set A/D channel type result=40 05:59:32 Set A/D encoding result=40 05:59:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:32 Set channel filter=0.000000e+000 result=40 05:59:32 Config A/D Result=40 05:59:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:32 Get A/D filter: -9.255963e+061 result=40 05:59:32 Get A/D value=-858993460 result=40 05:59:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:32 Parameters OK 05:59:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:32 Set A/D data flow result=40 05:59:32 Set A/D channel type result=40 05:59:32 Set A/D encoding result=40 05:59:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:32 Set channel filter=0.000000e+000 result=40 05:59:32 Config A/D Result=40 05:59:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:32 Get A/D filter: -9.255963e+061 result=40 05:59:32 Get A/D value=-858993460 result=40 05:59:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:32 Aux= 05:59:32 Message to Camera, serial 264693 queued 06:00:09 Received message from Master: op=PointingHead serial=264706 06:00:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:00:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:00:09 Point started: ret=0 06:00:09 point_skyscan result=0 06:00:10 Check angles 06:00:10 SkyScan query 06:00:10 SkyScan query done: ret=0 az=85.995<-5733 ze=21.555<-10563 Statuses=0008 0009 06:00:10 Msec=0 True Az=85.995 Ze=21.555 Az status=0008 Ze status=0009 06:00:11 Check angles 06:00:11 SkyScan query 06:00:11 SkyScan query done: ret=0 az=85.995<-5733 ze=0.66<-11956 Statuses=0008 0009 06:00:11 Msec=750 True Az=85.995 Ze=0.66 Az status=0008 Ze status=0009 06:00:11 Check angles 06:00:11 SkyScan query 06:00:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.76<-13384 Statuses=0008 0009 06:00:12 Msec=1500 True Az=85.995 Ze=-20.76 Az status=0008 Ze status=0009 06:00:12 Check angles 06:00:12 SkyScan query 06:00:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.67<-14778 Statuses=0008 0009 06:00:13 Msec=2250 True Az=85.995 Ze=-41.67 Az status=0008 Ze status=0009 06:00:13 Check angles 06:00:13 SkyScan query 06:00:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.585<-15439 Statuses=0008 0008 06:00:13 Msec=3000 True Az=85.995 Ze=-51.585 Az status=0008 Ze status=0008 06:00:13 Message to Master queued w/err=0: serial=264706 error=0 06:00:18 Received message from Master: op=Filter serial=264707 06:00:18 Color wheel filter change from 0 to 0 06:00:18 FLIGetFilterPos err=0 currentPosition=0 06:00:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:18 Filter is already there-color wheel unchanged 06:00:19 Received message from Master: op=Shutter serial=264708 06:00:19 Shutter LASER close 06:00:19 Received message from Camera: op=State serial=264710 06:00:19 GetSingleValue result=40 Value=cccccccc 06:00:19 SkyScan query 06:00:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:00:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:19 Parameters OK 06:00:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:19 Set A/D data flow result=40 06:00:19 Set A/D channel type result=40 06:00:19 Set A/D encoding result=40 06:00:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:19 Set channel filter=0.000000e+000 result=40 06:00:19 Config A/D Result=40 06:00:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:19 Get A/D filter: -9.255963e+061 result=40 06:00:19 Get A/D value=-858993460 result=40 06:00:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:19 Parameters OK 06:00:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:19 Set A/D data flow result=40 06:00:19 Set A/D channel type result=40 06:00:19 Set A/D encoding result=40 06:00:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:19 Set channel filter=0.000000e+000 result=40 06:00:19 Config A/D Result=40 06:00:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:19 Get A/D filter: -9.255963e+061 result=40 06:00:19 Get A/D value=-858993460 result=40 06:00:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:19 Aux= 06:00:19 Message to Camera, serial 264710 queued 06:00:56 Received message from Master: op=PointingHead serial=264723 06:00:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:00:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:00:56 Point started: ret=0 06:00:56 point_skyscan result=0 06:00:57 Check angles 06:00:57 SkyScan query 06:00:58 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.435<-17429 Statuses=0009 0009 06:00:58 Msec=0 True Az=109.14 Ze=-81.435 Az status=0009 Ze status=0009 06:00:58 Check angles 06:00:58 SkyScan query 06:00:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 06:00:59 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 06:00:59 Check angles 06:00:59 SkyScan query 06:00:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.345<-20223 Statuses=0008 0009 06:00:59 Msec=1500 True Az=112.995 Ze=-123.345 Az status=0008 Ze status=0009 06:00:59 Check angles 06:00:59 SkyScan query 06:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.285<-21619 Statuses=0008 0009 06:01:00 Msec=2250 True Az=112.995 Ze=-144.285 Az status=0008 Ze status=0009 06:01:00 Check angles 06:01:00 SkyScan query 06:01:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.24<-23016 Statuses=0008 0009 06:01:01 Msec=3000 True Az=112.995 Ze=-165.24 Az status=0008 Ze status=0009 06:01:01 Check angles 06:01:01 SkyScan query 06:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 06:01:02 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 06:01:02 Message to Master queued w/err=0: serial=264723 error=0 06:01:07 Received message from Master: op=Filter serial=264724 06:01:07 Color wheel filter change from 0 to 0 06:01:07 FLIGetFilterPos err=0 currentPosition=0 06:01:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:07 Filter is already there-color wheel unchanged 06:01:07 Received message from Master: op=Shutter serial=264725 06:01:07 Shutter LASER open 06:01:07 Received message from Camera: op=State serial=264727 06:01:07 GetSingleValue result=40 Value=cccccccc 06:01:07 SkyScan query 06:01:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:01:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:07 Parameters OK 06:01:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:07 Set A/D data flow result=40 06:01:07 Set A/D channel type result=40 06:01:07 Set A/D encoding result=40 06:01:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:07 Set channel filter=0.000000e+000 result=40 06:01:07 Config A/D Result=40 06:01:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:07 Get A/D filter: -9.255963e+061 result=40 06:01:07 Get A/D value=-858993460 result=40 06:01:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:07 Parameters OK 06:01:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:07 Set A/D data flow result=40 06:01:07 Set A/D channel type result=40 06:01:07 Set A/D encoding result=40 06:01:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:07 Set channel filter=0.000000e+000 result=40 06:01:07 Config A/D Result=40 06:01:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:07 Get A/D filter: -9.255963e+061 result=40 06:01:07 Get A/D value=-858993460 result=40 06:01:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:07 Aux= 06:01:07 Message to Camera, serial 264727 queued 06:01:16 Received message from Master: op=Shutter serial=264737 06:01:16 Shutter LASER close 06:01:16 Received message from Master: op=PointingHead serial=264741 06:01:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:01:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:01:17 Point started: ret=0 06:01:17 point_skyscan result=0 06:01:17 Check angles 06:01:17 SkyScan query 06:01:18 SkyScan query done: ret=0 az=90.03<-6002 ze=157.335<-1511 Statuses=0009 0009 06:01:18 Msec=0 True Az=90.03 Ze=157.335 Az status=0009 Ze status=0009 06:01:18 Check angles 06:01:18 SkyScan query 06:01:19 SkyScan query done: ret=0 az=72.54<-4836 ze=136.38<-2908 Statuses=0009 0009 06:01:19 Msec=750 True Az=72.54 Ze=136.38 Az status=0009 Ze status=0009 06:01:19 Check angles 06:01:19 SkyScan query 06:01:19 SkyScan query done: ret=0 az=55.125<-3675 ze=115.485<-4301 Statuses=0009 0009 06:01:19 Msec=1500 True Az=55.125 Ze=115.485 Az status=0009 Ze status=0009 06:01:20 Check angles 06:01:20 SkyScan query 06:01:20 SkyScan query done: ret=0 az=40.995<-2733 ze=94.47<-5702 Statuses=0009 0009 06:01:20 Msec=2250 True Az=40.995 Ze=94.47 Az status=0009 Ze status=0009 06:01:20 Check angles 06:01:20 SkyScan query 06:01:21 SkyScan query done: ret=0 az=40.995<-2733 ze=73.545<-7097 Statuses=0008 0009 06:01:21 Msec=3000 True Az=40.995 Ze=73.545 Az status=0008 Ze status=0009 06:01:21 Check angles 06:01:21 SkyScan query 06:01:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.905<-8473 Statuses=0008 0009 06:01:22 Msec=3750 True Az=40.995 Ze=52.905 Az status=0008 Ze status=0009 06:01:22 Check angles 06:01:22 SkyScan query 06:01:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:01:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:01:22 Message to Master queued w/err=0: serial=264741 error=0 06:01:27 Received message from Master: op=Filter serial=264742 06:01:27 Color wheel filter change from 0 to 0 06:01:27 FLIGetFilterPos err=0 currentPosition=0 06:01:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:27 Filter is already there-color wheel unchanged 06:01:28 Received message from Master: op=Shutter serial=264743 06:01:28 Shutter LASER close 06:01:28 Received message from Camera: op=State serial=264745 06:01:28 GetSingleValue result=40 Value=cccccccc 06:01:28 SkyScan query 06:01:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:01:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:28 Parameters OK 06:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:28 Set A/D data flow result=40 06:01:28 Set A/D channel type result=40 06:01:28 Set A/D encoding result=40 06:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:28 Set channel filter=0.000000e+000 result=40 06:01:28 Config A/D Result=40 06:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:28 Get A/D filter: -9.255963e+061 result=40 06:01:28 Get A/D value=-858993460 result=40 06:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:28 Parameters OK 06:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:28 Set A/D data flow result=40 06:01:28 Set A/D channel type result=40 06:01:28 Set A/D encoding result=40 06:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:28 Set channel filter=0.000000e+000 result=40 06:01:28 Config A/D Result=40 06:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:28 Get A/D filter: -9.255963e+061 result=40 06:01:28 Get A/D value=-858993460 result=40 06:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:28 Aux= 06:01:28 Message to Camera, serial 264745 queued 06:02:05 Received message from Master: op=PointingHead serial=264758 06:02:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:02:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:02:06 Point started: ret=0 06:02:06 point_skyscan result=0 06:02:06 Check angles 06:02:06 SkyScan query 06:02:07 SkyScan query done: ret=0 az=40.995<-2733 ze=21.975<-10535 Statuses=0008 0009 06:02:07 Msec=0 True Az=40.995 Ze=21.975 Az status=0008 Ze status=0009 06:02:07 Check angles 06:02:07 SkyScan query 06:02:08 SkyScan query done: ret=0 az=40.995<-2733 ze=1.035<-11931 Statuses=0008 0009 06:02:08 Msec=750 True Az=40.995 Ze=1.035 Az status=0008 Ze status=0009 06:02:08 Check angles 06:02:08 SkyScan query 06:02:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-19.905<-13327 Statuses=0008 0009 06:02:09 Msec=1500 True Az=40.995 Ze=-19.905 Az status=0008 Ze status=0009 06:02:09 Check angles 06:02:09 SkyScan query 06:02:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0009 06:02:09 Msec=2250 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0009 06:02:09 Check angles 06:02:09 SkyScan query 06:02:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 06:02:10 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 06:02:10 Message to Master queued w/err=0: serial=264758 error=0 06:02:15 Received message from Master: op=Filter serial=264759 06:02:15 Color wheel filter change from 0 to 0 06:02:15 FLIGetFilterPos err=0 currentPosition=0 06:02:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:15 Filter is already there-color wheel unchanged 06:02:15 Received message from Master: op=Shutter serial=264760 06:02:15 Shutter LASER close 06:02:15 Received message from Camera: op=State serial=264762 06:02:15 GetSingleValue result=40 Value=cccccccc 06:02:15 SkyScan query 06:02:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:02:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:16 Parameters OK 06:02:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:16 Set A/D data flow result=40 06:02:16 Set A/D channel type result=40 06:02:16 Set A/D encoding result=40 06:02:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:16 Set channel filter=0.000000e+000 result=40 06:02:16 Config A/D Result=40 06:02:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:16 Get A/D filter: -9.255963e+061 result=40 06:02:16 Get A/D value=-858993460 result=40 06:02:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:16 Parameters OK 06:02:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:16 Set A/D data flow result=40 06:02:16 Set A/D channel type result=40 06:02:16 Set A/D encoding result=40 06:02:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:16 Set channel filter=0.000000e+000 result=40 06:02:16 Config A/D Result=40 06:02:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:16 Get A/D filter: -9.255963e+061 result=40 06:02:16 Get A/D value=-858993460 result=40 06:02:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:16 Aux= 06:02:16 Message to Camera, serial 264762 queued 06:02:53 Received message from Master: op=PointingHead serial=264775 06:02:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:02:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:02:53 Point started: ret=0 06:02:53 point_skyscan result=0 06:02:54 Check angles 06:02:54 SkyScan query 06:02:54 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.625<-16575 Statuses=0009 0009 06:02:54 Msec=0 True Az=64.41 Ze=-68.625 Az status=0009 Ze status=0009 06:02:55 Check angles 06:02:55 SkyScan query 06:02:55 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.61<-17974 Statuses=0009 0009 06:02:55 Msec=750 True Az=81.9 Ze=-89.61 Az status=0009 Ze status=0009 06:02:55 Check angles 06:02:55 SkyScan query 06:02:56 SkyScan query done: ret=0 az=99.75<-6650 ze=-110.985<-19399 Statuses=0009 0009 06:02:56 Msec=1500 True Az=99.75 Ze=-110.985 Az status=0009 Ze status=0009 06:02:56 Check angles 06:02:56 SkyScan query 06:02:57 SkyScan query done: ret=0 az=117.27<-7818 ze=-131.895<-20793 Statuses=0009 0009 06:02:57 Msec=2250 True Az=117.27 Ze=-131.895 Az status=0009 Ze status=0009 06:02:57 Check angles 06:02:57 SkyScan query 06:02:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 06:02:57 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 06:02:58 Check angles 06:02:58 SkyScan query 06:02:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 06:02:58 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 06:02:58 Message to Master queued w/err=0: serial=264775 error=0 06:03:03 Received message from Master: op=Filter serial=264776 06:03:03 Color wheel filter change from 0 to 0 06:03:03 FLIGetFilterPos err=0 currentPosition=0 06:03:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:03 Filter is already there-color wheel unchanged 06:03:03 Received message from Master: op=Shutter serial=264777 06:03:03 Shutter LASER close 06:03:03 Received message from Camera: op=State serial=264779 06:03:03 GetSingleValue result=40 Value=cccccccc 06:03:03 SkyScan query 06:03:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:03:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:04 Parameters OK 06:03:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:04 Set A/D data flow result=40 06:03:04 Set A/D channel type result=40 06:03:04 Set A/D encoding result=40 06:03:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:04 Set channel filter=0.000000e+000 result=40 06:03:04 Config A/D Result=40 06:03:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:04 Get A/D filter: -9.255963e+061 result=40 06:03:04 Get A/D value=-858993460 result=40 06:03:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:04 Parameters OK 06:03:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:04 Set A/D data flow result=40 06:03:04 Set A/D channel type result=40 06:03:04 Set A/D encoding result=40 06:03:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:04 Set channel filter=0.000000e+000 result=40 06:03:04 Config A/D Result=40 06:03:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:04 Get A/D filter: -9.255963e+061 result=40 06:03:04 Get A/D value=-858993460 result=40 06:03:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:04 Aux= 06:03:04 Message to Camera, serial 264779 queued 06:03:41 Received message from Master: op=PointingHead serial=264792 06:03:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:03:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:03:41 Point started: ret=0 06:03:41 point_skyscan result=0 06:03:42 Check angles 06:03:42 SkyScan query 06:03:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 06:03:42 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 06:03:43 Check angles 06:03:43 SkyScan query 06:03:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:03:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:03:43 Message to Master queued w/err=0: serial=264792 error=0 06:03:48 Received message from Master: op=Filter serial=264793 06:03:48 Color wheel filter change from 0 to 0 06:03:48 FLIGetFilterPos err=0 currentPosition=0 06:03:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:48 Filter is already there-color wheel unchanged 06:03:48 Received message from Master: op=Shutter serial=264794 06:03:48 Shutter LASER open 06:03:49 Received message from Camera: op=State serial=264796 06:03:49 GetSingleValue result=40 Value=cccccccc 06:03:49 SkyScan query 06:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:03:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:49 Parameters OK 06:03:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:49 Set A/D data flow result=40 06:03:49 Set A/D channel type result=40 06:03:49 Set A/D encoding result=40 06:03:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:49 Set channel filter=0.000000e+000 result=40 06:03:49 Config A/D Result=40 06:03:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:49 Get A/D filter: -9.255963e+061 result=40 06:03:49 Get A/D value=-858993460 result=40 06:03:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:49 Parameters OK 06:03:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:49 Set A/D data flow result=40 06:03:49 Set A/D channel type result=40 06:03:49 Set A/D encoding result=40 06:03:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:49 Set channel filter=0.000000e+000 result=40 06:03:49 Config A/D Result=40 06:03:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:49 Get A/D filter: -9.255963e+061 result=40 06:03:49 Get A/D value=-858993460 result=40 06:03:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:49 Aux= 06:03:49 Message to Camera, serial 264796 queued 06:03:57 Received message from Master: op=Shutter serial=264805 06:03:57 Shutter LASER close 06:03:57 Received message from Master: op=PointingHead serial=264809 06:03:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:03:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:03:58 Point started: ret=0 06:03:58 point_skyscan result=0 06:03:58 Check angles 06:03:58 SkyScan query 06:03:59 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.16<-21544 Statuses=0009 0009 06:03:59 Msec=0 True Az=136.095 Ze=-143.16 Az status=0009 Ze status=0009 06:03:59 Check angles 06:03:59 SkyScan query 06:04:00 SkyScan query done: ret=0 az=153.915<-10261 ze=-121.77<-20118 Statuses=0009 0009 06:04:00 Msec=750 True Az=153.915 Ze=-121.77 Az status=0009 Ze status=0009 06:04:00 Check angles 06:04:00 SkyScan query 06:04:00 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.74<-18716 Statuses=0009 0009 06:04:00 Msec=1500 True Az=171.45 Ze=-100.74 Az status=0009 Ze status=0009 06:04:01 Check angles 06:04:01 SkyScan query 06:04:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.875<-17325 Statuses=0008 0009 06:04:01 Msec=2250 True Az=176.01 Ze=-79.875 Az status=0008 Ze status=0009 06:04:01 Check angles 06:04:01 SkyScan query 06:04:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.41<-15894 Statuses=0008 0009 06:04:02 Msec=3000 True Az=176.01 Ze=-58.41 Az status=0008 Ze status=0009 06:04:02 Check angles 06:04:02 SkyScan query 06:04:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:04:03 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:04:03 Message to Master queued w/err=0: serial=264809 error=0 06:04:08 Received message from Master: op=Filter serial=264810 06:04:08 Color wheel filter change from 0 to 0 06:04:08 FLIGetFilterPos err=0 currentPosition=0 06:04:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:08 Filter is already there-color wheel unchanged 06:04:08 Received message from Master: op=Shutter serial=264811 06:04:08 Shutter LASER close 06:04:08 Received message from Camera: op=State serial=264813 06:04:08 GetSingleValue result=40 Value=cccccccc 06:04:08 SkyScan query 06:04:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:04:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:09 Parameters OK 06:04:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:09 Set A/D data flow result=40 06:04:09 Set A/D channel type result=40 06:04:09 Set A/D encoding result=40 06:04:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:09 Set channel filter=0.000000e+000 result=40 06:04:09 Config A/D Result=40 06:04:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:09 Get A/D filter: -9.255963e+061 result=40 06:04:09 Get A/D value=-858993460 result=40 06:04:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:09 Parameters OK 06:04:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:09 Set A/D data flow result=40 06:04:09 Set A/D channel type result=40 06:04:09 Set A/D encoding result=40 06:04:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:09 Set channel filter=0.000000e+000 result=40 06:04:09 Config A/D Result=40 06:04:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:09 Get A/D filter: -9.255963e+061 result=40 06:04:09 Get A/D value=-858993460 result=40 06:04:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:09 Aux= 06:04:09 Message to Camera, serial 264813 queued 06:04:45 Received message from Master: op=PointingHead serial=264826 06:04:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:04:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:04:46 Point started: ret=0 06:04:46 point_skyscan result=0 06:04:47 Check angles 06:04:47 SkyScan query 06:04:47 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.735<-13449 Statuses=0009 0009 06:04:47 Msec=0 True Az=152.985 Ze=-21.735 Az status=0009 Ze status=0009 06:04:47 Check angles 06:04:47 SkyScan query 06:04:48 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.315<-12021 Statuses=0009 0009 06:04:48 Msec=750 True Az=135.135 Ze=-0.315 Az status=0009 Ze status=0009 06:04:48 Check angles 06:04:48 SkyScan query 06:04:49 SkyScan query done: ret=0 az=117.63<-7842 ze=20.67<-10622 Statuses=0009 0009 06:04:49 Msec=1500 True Az=117.63 Ze=20.67 Az status=0009 Ze status=0009 06:04:49 Check angles 06:04:49 SkyScan query 06:04:49 SkyScan query done: ret=0 az=100.245<-6683 ze=41.61<-9226 Statuses=0009 0009 06:04:49 Msec=2250 True Az=100.245 Ze=41.61 Az status=0009 Ze status=0009 06:04:50 Check angles 06:04:50 SkyScan query 06:04:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 06:04:50 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 06:04:50 Check angles 06:04:50 SkyScan query 06:04:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:04:51 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:04:51 Message to Master queued w/err=0: serial=264826 error=0 06:04:56 Received message from Master: op=Filter serial=264827 06:04:56 Color wheel filter change from 0 to 0 06:04:56 FLIGetFilterPos err=0 currentPosition=0 06:04:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:56 Filter is already there-color wheel unchanged 06:04:56 Received message from Master: op=Shutter serial=264828 06:04:56 Shutter LASER close 06:04:56 Received message from Camera: op=State serial=264830 06:04:56 GetSingleValue result=40 Value=cccccccc 06:04:56 SkyScan query 06:04:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:04:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:57 Parameters OK 06:04:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:57 Set A/D data flow result=40 06:04:57 Set A/D channel type result=40 06:04:57 Set A/D encoding result=40 06:04:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:57 Set channel filter=0.000000e+000 result=40 06:04:57 Config A/D Result=40 06:04:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:57 Get A/D filter: -9.255963e+061 result=40 06:04:57 Get A/D value=-858993460 result=40 06:04:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:57 Parameters OK 06:04:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:57 Set A/D data flow result=40 06:04:57 Set A/D channel type result=40 06:04:57 Set A/D encoding result=40 06:04:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:57 Set channel filter=0.000000e+000 result=40 06:04:57 Config A/D Result=40 06:04:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:57 Get A/D filter: -9.255963e+061 result=40 06:04:57 Get A/D value=-858993460 result=40 06:04:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:57 Aux= 06:04:57 Message to Camera, serial 264830 queued 06:05:34 Received message from Master: op=PointingHead serial=264843 06:05:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:05:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:05:34 Point started: ret=0 06:05:34 point_skyscan result=0 06:05:35 Check angles 06:05:35 SkyScan query 06:05:35 SkyScan query done: ret=0 az=85.995<-5733 ze=21.66<-10556 Statuses=0008 0009 06:05:35 Msec=0 True Az=85.995 Ze=21.66 Az status=0008 Ze status=0009 06:05:36 Check angles 06:05:36 SkyScan query 06:05:36 SkyScan query done: ret=0 az=86.01<-5734 ze=0.285<-11981 Statuses=0008 0009 06:05:36 Msec=750 True Az=86.01 Ze=0.285 Az status=0008 Ze status=0009 06:05:36 Check angles 06:05:36 SkyScan query 06:05:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.12<-13408 Statuses=0008 0009 06:05:37 Msec=1500 True Az=85.995 Ze=-21.12 Az status=0008 Ze status=0009 06:05:37 Check angles 06:05:37 SkyScan query 06:05:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.09<-14806 Statuses=0008 0009 06:05:38 Msec=2250 True Az=85.995 Ze=-42.09 Az status=0008 Ze status=0009 06:05:38 Check angles 06:05:38 SkyScan query 06:05:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:05:38 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:05:38 Message to Master queued w/err=0: serial=264843 error=0 06:05:43 Received message from Master: op=Filter serial=264844 06:05:43 Color wheel filter change from 0 to 0 06:05:43 FLIGetFilterPos err=0 currentPosition=0 06:05:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:43 Filter is already there-color wheel unchanged 06:05:44 Received message from Master: op=Shutter serial=264845 06:05:44 Shutter LASER close 06:05:44 Received message from Camera: op=State serial=264847 06:05:44 GetSingleValue result=40 Value=cccccccc 06:05:44 SkyScan query 06:05:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:05:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:44 Parameters OK 06:05:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:44 Set A/D data flow result=40 06:05:44 Set A/D channel type result=40 06:05:44 Set A/D encoding result=40 06:05:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-19 06:05:44] 06:05:44 Set channel filter=0.000000e+000 result=40 06:05:44 Config A/D Result=40 06:05:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:44 Get A/D filter: -9.255963e+061 result=40 06:05:44 Get A/D value=-858993460 result=40 06:05:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:44 Parameters OK 06:05:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:44 Set A/D data flow result=40 06:05:44 Set A/D channel type result=40 06:05:44 Set A/D encoding result=40 06:05:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:44 Set channel filter=0.000000e+000 result=40 06:05:44 Config A/D Result=40 06:05:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:44 Get A/D filter: -9.255963e+061 result=40 06:05:44 Get A/D value=-858993460 result=40 06:05:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:44 Aux= 06:05:44 Message to Camera, serial 264847 queued 06:06:21 Received message from Master: op=PointingHead serial=264860 06:06:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:06:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:06:21 Point started: ret=0 06:06:21 point_skyscan result=0 06:06:22 Check angles 06:06:22 SkyScan query 06:06:23 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.285<-17419 Statuses=0009 0009 06:06:23 Msec=0 True Az=108.96 Ze=-81.285 Az status=0009 Ze status=0009 06:06:23 Check angles 06:06:23 SkyScan query 06:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.24<-18816 Statuses=0008 0009 06:06:23 Msec=750 True Az=112.995 Ze=-102.24 Az status=0008 Ze status=0009 06:06:24 Check angles 06:06:24 SkyScan query 06:06:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 06:06:24 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 06:06:24 Check angles 06:06:24 SkyScan query 06:06:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 06:06:25 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 06:06:25 Check angles 06:06:25 SkyScan query 06:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 06:06:26 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 06:06:26 Check angles 06:06:26 SkyScan query 06:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:06:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:06:26 Message to Master queued w/err=0: serial=264860 error=0 06:06:31 Received message from Master: op=Filter serial=264861 06:06:31 Color wheel filter change from 0 to 0 06:06:31 FLIGetFilterPos err=0 currentPosition=0 06:06:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:31 Filter is already there-color wheel unchanged 06:06:32 Received message from Master: op=Shutter serial=264862 06:06:32 Shutter LASER open 06:06:32 Received message from Camera: op=State serial=264864 06:06:32 GetSingleValue result=40 Value=cccccccc 06:06:32 SkyScan query 06:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:06:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:32 Parameters OK 06:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:32 Set A/D data flow result=40 06:06:32 Set A/D channel type result=40 06:06:32 Set A/D encoding result=40 06:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:32 Set channel filter=0.000000e+000 result=40 06:06:32 Config A/D Result=40 06:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:32 Get A/D filter: -9.255963e+061 result=40 06:06:32 Get A/D value=-858993460 result=40 06:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:32 Parameters OK 06:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:32 Set A/D data flow result=40 06:06:32 Set A/D channel type result=40 06:06:32 Set A/D encoding result=40 06:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:32 Set channel filter=0.000000e+000 result=40 06:06:32 Config A/D Result=40 06:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:32 Get A/D filter: -9.255963e+061 result=40 06:06:32 Get A/D value=-858993460 result=40 06:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:32 Aux= 06:06:32 Message to Camera, serial 264864 queued 06:06:41 Received message from Master: op=Shutter serial=264874 06:06:41 Shutter LASER close 06:06:41 Received message from Master: op=PointingHead serial=264878 06:06:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:06:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:06:42 Point started: ret=0 06:06:42 point_skyscan result=0 06:06:42 Check angles 06:06:42 SkyScan query 06:06:43 SkyScan query done: ret=0 az=89.64<-5976 ze=156.96<-1536 Statuses=0009 0009 06:06:43 Msec=0 True Az=89.64 Ze=156.96 Az status=0009 Ze status=0009 06:06:43 Check angles 06:06:43 SkyScan query 06:06:44 SkyScan query done: ret=0 az=72.24<-4816 ze=136.035<-2931 Statuses=0009 0009 06:06:44 Msec=750 True Az=72.24 Ze=136.035 Az status=0009 Ze status=0009 06:06:44 Check angles 06:06:44 SkyScan query 06:06:44 SkyScan query done: ret=0 az=54.69<-3646 ze=115.065<-4329 Statuses=0009 0009 06:06:44 Msec=1500 True Az=54.69 Ze=115.065 Az status=0009 Ze status=0009 06:06:45 Check angles 06:06:45 SkyScan query 06:06:45 SkyScan query done: ret=0 az=40.995<-2733 ze=94.08<-5728 Statuses=0009 0009 06:06:45 Msec=2250 True Az=40.995 Ze=94.08 Az status=0009 Ze status=0009 06:06:45 Check angles 06:06:45 SkyScan query 06:06:46 SkyScan query done: ret=0 az=40.995<-2733 ze=73.11<-7126 Statuses=0008 0009 06:06:46 Msec=3000 True Az=40.995 Ze=73.11 Az status=0008 Ze status=0009 06:06:46 Check angles 06:06:46 SkyScan query 06:06:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 06:06:47 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 06:06:47 Check angles 06:06:47 SkyScan query 06:06:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:06:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:06:47 Message to Master queued w/err=0: serial=264878 error=0 06:06:52 Received message from Master: op=Filter serial=264879 06:06:52 Color wheel filter change from 0 to 0 06:06:52 FLIGetFilterPos err=0 currentPosition=0 06:06:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:52 Filter is already there-color wheel unchanged 06:06:53 Received message from Master: op=Shutter serial=264880 06:06:53 Shutter LASER close 06:06:53 Received message from Camera: op=State serial=264882 06:06:53 GetSingleValue result=40 Value=cccccccc 06:06:53 SkyScan query 06:06:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:06:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:53 Parameters OK 06:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:53 Set A/D data flow result=40 06:06:53 Set A/D channel type result=40 06:06:53 Set A/D encoding result=40 06:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:53 Set channel filter=0.000000e+000 result=40 06:06:53 Config A/D Result=40 06:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:53 Get A/D filter: -9.255963e+061 result=40 06:06:53 Get A/D value=-858993460 result=40 06:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:53 Parameters OK 06:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:53 Set A/D data flow result=40 06:06:53 Set A/D channel type result=40 06:06:53 Set A/D encoding result=40 06:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:53 Set channel filter=0.000000e+000 result=40 06:06:53 Config A/D Result=40 06:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:53 Get A/D filter: -9.255963e+061 result=40 06:06:53 Get A/D value=-858993460 result=40 06:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:53 Aux= 06:06:53 Message to Camera, serial 264882 queued 06:07:30 Received message from Master: op=PointingHead serial=264895 06:07:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:07:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:07:31 Point started: ret=0 06:07:31 point_skyscan result=0 06:07:31 Check angles 06:07:31 SkyScan query 06:07:32 SkyScan query done: ret=0 az=40.995<-2733 ze=21.6<-10560 Statuses=0008 0009 06:07:32 Msec=0 True Az=40.995 Ze=21.6 Az status=0008 Ze status=0009 06:07:32 Check angles 06:07:32 SkyScan query 06:07:33 SkyScan query done: ret=0 az=41.01<-2734 ze=0.165<-11989 Statuses=0008 0009 06:07:33 Msec=750 True Az=41.01 Ze=0.165 Az status=0008 Ze status=0009 06:07:33 Check angles 06:07:33 SkyScan query 06:07:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.79<-13386 Statuses=0008 0009 06:07:33 Msec=1500 True Az=40.995 Ze=-20.79 Az status=0008 Ze status=0009 06:07:34 Check angles 06:07:34 SkyScan query 06:07:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 06:07:34 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 06:07:34 Check angles 06:07:34 SkyScan query 06:07:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 06:07:35 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 06:07:35 Message to Master queued w/err=0: serial=264895 error=0 06:07:40 Received message from Master: op=Filter serial=264896 06:07:40 Color wheel filter change from 0 to 0 06:07:40 FLIGetFilterPos err=0 currentPosition=0 06:07:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:40 Filter is already there-color wheel unchanged 06:07:40 Received message from Master: op=Shutter serial=264897 06:07:40 Shutter LASER close 06:07:40 Received message from Camera: op=State serial=264899 06:07:40 GetSingleValue result=40 Value=cccccccc 06:07:40 SkyScan query 06:07:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:07:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:41 Parameters OK 06:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:41 Set A/D data flow result=40 06:07:41 Set A/D channel type result=40 06:07:41 Set A/D encoding result=40 06:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:41 Set channel filter=0.000000e+000 result=40 06:07:41 Config A/D Result=40 06:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:41 Get A/D filter: -9.255963e+061 result=40 06:07:41 Get A/D value=-858993460 result=40 06:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:41 Parameters OK 06:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:41 Set A/D data flow result=40 06:07:41 Set A/D channel type result=40 06:07:41 Set A/D encoding result=40 06:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:41 Set channel filter=0.000000e+000 result=40 06:07:41 Config A/D Result=40 06:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:41 Get A/D filter: -9.255963e+061 result=40 06:07:41 Get A/D value=-858993460 result=40 06:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:41 Aux= 06:07:41 Message to Camera, serial 264899 queued 06:08:18 Received message from Master: op=PointingHead serial=264912 06:08:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:08:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:08:18 Point started: ret=0 06:08:18 point_skyscan result=0 06:08:19 Check angles 06:08:19 SkyScan query 06:08:19 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.28<-16552 Statuses=0009 0009 06:08:19 Msec=0 True Az=64.05 Ze=-68.28 Az status=0009 Ze status=0009 06:08:20 Check angles 06:08:20 SkyScan query 06:08:20 SkyScan query done: ret=0 az=81.405<-5427 ze=-89.28<-17952 Statuses=0009 0009 06:08:20 Msec=750 True Az=81.405 Ze=-89.28 Az status=0009 Ze status=0009 06:08:20 Check angles 06:08:20 SkyScan query 06:08:21 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.205<-19347 Statuses=0009 0009 06:08:21 Msec=1500 True Az=98.985 Ze=-110.205 Az status=0009 Ze status=0009 06:08:21 Check angles 06:08:21 SkyScan query 06:08:22 SkyScan query done: ret=0 az=116.355<-7757 ze=-131.175<-20745 Statuses=0009 0009 06:08:22 Msec=2250 True Az=116.355 Ze=-131.175 Az status=0009 Ze status=0009 06:08:22 Check angles 06:08:22 SkyScan query 06:08:22 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.555<-21437 Statuses=0009 0008 06:08:22 Msec=3000 True Az=130.98 Ze=-141.555 Az status=0009 Ze status=0008 06:08:23 Check angles 06:08:23 SkyScan query 06:08:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 06:08:23 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 06:08:23 Message to Master queued w/err=0: serial=264912 error=0 06:08:28 Received message from Master: op=Filter serial=264913 06:08:28 Color wheel filter change from 0 to 0 06:08:28 FLIGetFilterPos err=0 currentPosition=0 06:08:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:28 Filter is already there-color wheel unchanged 06:08:28 Received message from Master: op=Shutter serial=264914 06:08:28 Shutter LASER close 06:08:28 Received message from Camera: op=State serial=264916 06:08:28 GetSingleValue result=40 Value=cccccccc 06:08:28 SkyScan query 06:08:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:08:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:29 Parameters OK 06:08:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:29 Set A/D data flow result=40 06:08:29 Set A/D channel type result=40 06:08:29 Set A/D encoding result=40 06:08:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:29 Set channel filter=0.000000e+000 result=40 06:08:29 Config A/D Result=40 06:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:29 Get A/D filter: -9.255963e+061 result=40 06:08:29 Get A/D value=-858993460 result=40 06:08:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:29 Parameters OK 06:08:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:29 Set A/D data flow result=40 06:08:29 Set A/D channel type result=40 06:08:29 Set A/D encoding result=40 06:08:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:29 Set channel filter=0.000000e+000 result=40 06:08:29 Config A/D Result=40 06:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:29 Get A/D filter: -9.255963e+061 result=40 06:08:29 Get A/D value=-858993460 result=40 06:08:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:29 Aux= 06:08:29 Message to Camera, serial 264916 queued 06:09:06 Received message from Master: op=PointingHead serial=264929 06:09:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:09:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:09:06 Point started: ret=0 06:09:06 point_skyscan result=0 06:09:07 Check angles 06:09:07 SkyScan query 06:09:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 06:09:07 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 06:09:08 Check angles 06:09:08 SkyScan query 06:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:09:08 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:09:08 Message to Master queued w/err=0: serial=264929 error=0 06:09:13 Received message from Master: op=Filter serial=264930 06:09:13 Color wheel filter change from 0 to 0 06:09:13 FLIGetFilterPos err=0 currentPosition=0 06:09:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:13 Filter is already there-color wheel unchanged 06:09:13 Received message from Master: op=Shutter serial=264931 06:09:13 Shutter LASER open 06:09:13 Received message from Camera: op=State serial=264933 06:09:13 GetSingleValue result=40 Value=cccccccc 06:09:13 SkyScan query 06:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:09:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:14 Parameters OK 06:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:14 Set A/D data flow result=40 06:09:14 Set A/D channel type result=40 06:09:14 Set A/D encoding result=40 06:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:14 Set channel filter=0.000000e+000 result=40 06:09:14 Config A/D Result=40 06:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:14 Get A/D filter: -9.255963e+061 result=40 06:09:14 Get A/D value=-858993460 result=40 06:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:14 Parameters OK 06:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:14 Set A/D data flow result=40 06:09:14 Set A/D channel type result=40 06:09:14 Set A/D encoding result=40 06:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:14 Set channel filter=0.000000e+000 result=40 06:09:14 Config A/D Result=40 06:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:14 Get A/D filter: -9.255963e+061 result=40 06:09:14 Get A/D value=-858993460 result=40 06:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:14 Aux= 06:09:14 Message to Camera, serial 264933 queued 06:09:22 Received message from Master: op=Shutter serial=264943 06:09:23 Shutter LASER close 06:09:23 Received message from Master: op=PointingHead serial=264947 06:09:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:09:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:09:23 Point started: ret=0 06:09:23 point_skyscan result=0 06:09:24 Check angles 06:09:24 SkyScan query 06:09:25 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.145<-21543 Statuses=0009 0009 06:09:25 Msec=0 True Az=136.095 Ze=-143.145 Az status=0009 Ze status=0009 06:09:25 Check angles 06:09:25 SkyScan query 06:09:26 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.16<-20144 Statuses=0009 0009 06:09:26 Msec=750 True Az=153.495 Ze=-122.16 Az status=0009 Ze status=0009 06:09:26 Check angles 06:09:26 SkyScan query 06:09:26 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.265<-18751 Statuses=0009 0009 06:09:26 Msec=1500 True Az=171.015 Ze=-101.265 Az status=0009 Ze status=0009 06:09:26 Check angles 06:09:26 SkyScan query 06:09:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.295<-17353 Statuses=0008 0009 06:09:27 Msec=2250 True Az=175.995 Ze=-80.295 Az status=0008 Ze status=0009 06:09:27 Check angles 06:09:27 SkyScan query 06:09:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 06:09:28 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 06:09:28 Check angles 06:09:28 SkyScan query 06:09:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:09:29 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:09:29 Message to Master queued w/err=0: serial=264947 error=0 06:09:34 Received message from Master: op=Filter serial=264948 06:09:34 Color wheel filter change from 0 to 0 06:09:34 FLIGetFilterPos err=0 currentPosition=0 06:09:34 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:34 Filter is already there-color wheel unchanged 06:09:34 Received message from Master: op=Shutter serial=264949 06:09:34 Shutter LASER close 06:09:34 Received message from Camera: op=State serial=264951 06:09:34 GetSingleValue result=40 Value=cccccccc 06:09:34 SkyScan query 06:09:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:09:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:34 Parameters OK 06:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:34 Set A/D data flow result=40 06:09:34 Set A/D channel type result=40 06:09:34 Set A/D encoding result=40 06:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:34 Set channel filter=0.000000e+000 result=40 06:09:34 Config A/D Result=40 06:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:34 Get A/D filter: -9.255963e+061 result=40 06:09:34 Get A/D value=-858993460 result=40 06:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:34 Parameters OK 06:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:34 Set A/D data flow result=40 06:09:34 Set A/D channel type result=40 06:09:34 Set A/D encoding result=40 06:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:34 Set channel filter=0.000000e+000 result=40 06:09:34 Config A/D Result=40 06:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:34 Get A/D filter: -9.255963e+061 result=40 06:09:34 Get A/D value=-858993460 result=40 06:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:34 Aux= 06:09:34 Message to Camera, serial 264951 queued 06:10:10 Received message from Master: op=PointingHead serial=264963 06:10:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:10:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:10:11 Point started: ret=0 06:10:11 point_skyscan result=0 06:10:11 Check angles 06:10:11 SkyScan query 06:10:12 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.705<-13447 Statuses=0009 0009 06:10:12 Msec=0 True Az=152.955 Ze=-21.705 Az status=0009 Ze status=0009 06:10:12 Check angles 06:10:12 SkyScan query 06:10:13 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.705<-12047 Statuses=0009 0009 06:10:13 Msec=750 True Az=135.375 Ze=-0.705 Az status=0009 Ze status=0009 06:10:13 Check angles 06:10:13 SkyScan query 06:10:13 SkyScan query done: ret=0 az=118.005<-7867 ze=20.235<-10651 Statuses=0009 0009 06:10:13 Msec=1500 True Az=118.005 Ze=20.235 Az status=0009 Ze status=0009 06:10:14 Check angles 06:10:14 SkyScan query 06:10:14 SkyScan query done: ret=0 az=100.545<-6703 ze=41.235<-9251 Statuses=0009 0009 06:10:14 Msec=2250 True Az=100.545 Ze=41.235 Az status=0009 Ze status=0009 06:10:14 Check angles 06:10:14 SkyScan query 06:10:15 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 06:10:15 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 06:10:15 Check angles 06:10:15 SkyScan query 06:10:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:10:16 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:10:16 Message to Master queued w/err=0: serial=264963 error=0 06:10:21 Received message from Master: op=Filter serial=264964 06:10:21 Color wheel filter change from 0 to 0 06:10:21 FLIGetFilterPos err=0 currentPosition=0 06:10:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:21 Filter is already there-color wheel unchanged 06:10:21 Received message from Master: op=Shutter serial=264965 06:10:21 Shutter LASER close 06:10:21 Received message from Camera: op=State serial=264967 06:10:21 GetSingleValue result=40 Value=cccccccc 06:10:21 SkyScan query 06:10:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:10:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:22 Parameters OK 06:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:22 Set A/D data flow result=40 06:10:22 Set A/D channel type result=40 06:10:22 Set A/D encoding result=40 06:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:22 Set channel filter=0.000000e+000 result=40 06:10:22 Config A/D Result=40 06:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:22 Get A/D filter: -9.255963e+061 result=40 06:10:22 Get A/D value=-858993460 result=40 06:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:22 Parameters OK 06:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:22 Set A/D data flow result=40 06:10:22 Set A/D channel type result=40 06:10:22 Set A/D encoding result=40 06:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:22 Set channel filter=0.000000e+000 result=40 06:10:22 Config A/D Result=40 06:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:22 Get A/D filter: -9.255963e+061 result=40 06:10:22 Get A/D value=-858993460 result=40 06:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:22 Aux= 06:10:22 Message to Camera, serial 264967 queued 06:10:58 Received message from Master: op=PointingHead serial=264980 06:10:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:10:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:10:59 Point started: ret=0 06:10:59 point_skyscan result=0 06:11:00 Check angles 06:11:00 SkyScan query 06:11:00 SkyScan query done: ret=0 az=85.995<-5733 ze=21.27<-10582 Statuses=0008 0009 06:11:00 Msec=0 True Az=85.995 Ze=21.27 Az status=0008 Ze status=0009 06:11:00 Check angles 06:11:00 SkyScan query 06:11:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.15<-12010 Statuses=0008 0009 06:11:01 Msec=750 True Az=85.995 Ze=-0.15 Az status=0008 Ze status=0009 06:11:01 Check angles 06:11:01 SkyScan query 06:11:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.09<-13406 Statuses=0008 0009 06:11:02 Msec=1500 True Az=85.995 Ze=-21.09 Az status=0008 Ze status=0009 06:11:02 Check angles 06:11:02 SkyScan query 06:11:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.06<-14804 Statuses=0008 0009 06:11:02 Msec=2250 True Az=85.995 Ze=-42.06 Az status=0008 Ze status=0009 06:11:03 Check angles 06:11:03 SkyScan query 06:11:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:11:03 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:11:03 Message to Master queued w/err=0: serial=264980 error=0 06:11:08 Received message from Master: op=Filter serial=264981 06:11:08 Color wheel filter change from 0 to 0 06:11:08 FLIGetFilterPos err=0 currentPosition=0 06:11:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:08 Filter is already there-color wheel unchanged 06:11:08 Received message from Master: op=Shutter serial=264982 06:11:08 Shutter LASER close 06:11:08 Received message from Camera: op=State serial=264984 06:11:08 GetSingleValue result=40 Value=cccccccc 06:11:08 SkyScan query 06:11:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:11:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:09 Parameters OK 06:11:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:09 Set A/D data flow result=40 06:11:09 Set A/D channel type result=40 06:11:09 Set A/D encoding result=40 06:11:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:09 Set channel filter=0.000000e+000 result=40 06:11:09 Config A/D Result=40 06:11:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:09 Get A/D filter: -9.255963e+061 result=40 06:11:09 Get A/D value=-858993460 result=40 06:11:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:09 Parameters OK 06:11:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:09 Set A/D data flow result=40 06:11:09 Set A/D channel type result=40 06:11:09 Set A/D encoding result=40 06:11:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:09 Set channel filter=0.000000e+000 result=40 06:11:09 Config A/D Result=40 06:11:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:09 Get A/D filter: -9.255963e+061 result=40 06:11:09 Get A/D value=-858993460 result=40 06:11:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:09 Aux= 06:11:09 Message to Camera, serial 264984 queued 06:11:46 Received message from Master: op=PointingHead serial=264997 06:11:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:11:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:11:46 Point started: ret=0 06:11:46 point_skyscan result=0 06:11:47 Check angles 06:11:47 SkyScan query 06:11:47 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.735<-17449 Statuses=0009 0009 06:11:47 Msec=0 True Az=109.365 Ze=-81.735 Az status=0009 Ze status=0009 06:11:48 Check angles 06:11:48 SkyScan query 06:11:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 06:11:48 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 06:11:48 Check angles 06:11:48 SkyScan query 06:11:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 06:11:49 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 06:11:49 Check angles 06:11:49 SkyScan query 06:11:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.96<-21664 Statuses=0008 0009 06:11:50 Msec=2250 True Az=112.995 Ze=-144.96 Az status=0008 Ze status=0009 06:11:50 Check angles 06:11:50 SkyScan query 06:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 06:11:51 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 06:11:51 Check angles 06:11:51 SkyScan query 06:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 06:11:51 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 06:11:51 Message to Master queued w/err=0: serial=264997 error=0 06:11:56 Received message from Master: op=Filter serial=264998 06:11:56 Color wheel filter change from 0 to 0 06:11:56 FLIGetFilterPos err=0 currentPosition=0 06:11:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:56 Filter is already there-color wheel unchanged 06:11:56 Received message from Master: op=Shutter serial=264999 06:11:56 Shutter LASER open 06:11:57 Received message from Camera: op=State serial=265001 06:11:57 GetSingleValue result=40 Value=cccccccc 06:11:57 SkyScan query 06:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:11:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:57 Parameters OK 06:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:57 Set A/D data flow result=40 06:11:57 Set A/D channel type result=40 06:11:57 Set A/D encoding result=40 06:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:57 Set channel filter=0.000000e+000 result=40 06:11:57 Config A/D Result=40 06:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:57 Get A/D filter: -9.255963e+061 result=40 06:11:57 Get A/D value=-858993460 result=40 06:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:57 Parameters OK 06:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:57 Set A/D data flow result=40 06:11:57 Set A/D channel type result=40 06:11:57 Set A/D encoding result=40 06:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:57 Set channel filter=0.000000e+000 result=40 06:11:57 Config A/D Result=40 06:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:57 Get A/D filter: -9.255963e+061 result=40 06:11:57 Get A/D value=-858993460 result=40 06:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:57 Aux= 06:11:57 Message to Camera, serial 265001 queued 06:12:06 Received message from Master: op=Shutter serial=265011 06:12:06 Shutter LASER close 06:12:06 Received message from Master: op=PointingHead serial=265015 06:12:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:12:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:12:06 Point started: ret=0 06:12:06 point_skyscan result=0 06:12:07 Check angles 06:12:07 SkyScan query 06:12:08 SkyScan query done: ret=0 az=90.075<-6005 ze=157.395<-1507 Statuses=0009 0009 06:12:08 Msec=0 True Az=90.075 Ze=157.395 Az status=0009 Ze status=0009 06:12:08 Check angles 06:12:08 SkyScan query 06:12:09 SkyScan query done: ret=0 az=72.21<-4814 ze=136.005<-2933 Statuses=0009 0009 06:12:09 Msec=750 True Az=72.21 Ze=136.005 Az status=0009 Ze status=0009 06:12:09 Check angles 06:12:09 SkyScan query 06:12:09 SkyScan query done: ret=0 az=54.405<-3627 ze=114.525<-4365 Statuses=0009 0009 06:12:09 Msec=1500 True Az=54.405 Ze=114.525 Az status=0009 Ze status=0009 06:12:10 Check angles 06:12:10 SkyScan query 06:12:10 SkyScan query done: ret=0 az=40.98<-2732 ze=93.645<-5757 Statuses=0009 0009 06:12:10 Msec=2250 True Az=40.98 Ze=93.645 Az status=0009 Ze status=0009 06:12:10 Check angles 06:12:10 SkyScan query 06:12:11 SkyScan query done: ret=0 az=40.995<-2733 ze=72.63<-7158 Statuses=0008 0009 06:12:11 Msec=3000 True Az=40.995 Ze=72.63 Az status=0008 Ze status=0009 06:12:11 Check angles 06:12:11 SkyScan query 06:12:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 06:12:12 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 06:12:12 Check angles 06:12:12 SkyScan query 06:12:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:12:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:12:12 Message to Master queued w/err=0: serial=265015 error=0 06:12:17 Received message from Master: op=Filter serial=265016 06:12:17 Color wheel filter change from 0 to 0 06:12:17 FLIGetFilterPos err=0 currentPosition=0 06:12:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:17 Filter is already there-color wheel unchanged 06:12:18 Received message from Master: op=Shutter serial=265017 06:12:18 Shutter LASER close 06:12:18 Received message from Camera: op=State serial=265019 06:12:18 GetSingleValue result=40 Value=cccccccc 06:12:18 SkyScan query 06:12:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:12:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:18 Parameters OK 06:12:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:18 Set A/D data flow result=40 06:12:18 Set A/D channel type result=40 06:12:18 Set A/D encoding result=40 06:12:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:18 Set channel filter=0.000000e+000 result=40 06:12:18 Config A/D Result=40 06:12:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:18 Get A/D filter: -9.255963e+061 result=40 06:12:18 Get A/D value=-858993460 result=40 06:12:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:18 Parameters OK 06:12:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:18 Set A/D data flow result=40 06:12:18 Set A/D channel type result=40 06:12:18 Set A/D encoding result=40 06:12:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:18 Set channel filter=0.000000e+000 result=40 06:12:18 Config A/D Result=40 06:12:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:18 Get A/D filter: -9.255963e+061 result=40 06:12:18 Get A/D value=-858993460 result=40 06:12:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:18 Aux= 06:12:18 Message to Camera, serial 265019 queued 06:12:55 Received message from Master: op=PointingHead serial=265032 06:12:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:12:55 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:12:56 Point started: ret=0 06:12:56 point_skyscan result=0 06:12:56 Check angles 06:12:56 SkyScan query 06:12:57 SkyScan query done: ret=0 az=40.98<-2732 ze=21.81<-10546 Statuses=0008 0009 06:12:57 Msec=0 True Az=40.98 Ze=21.81 Az status=0008 Ze status=0009 06:12:57 Check angles 06:12:57 SkyScan query 06:12:58 SkyScan query done: ret=0 az=40.995<-2733 ze=0.855<-11943 Statuses=0008 0009 06:12:58 Msec=750 True Az=40.995 Ze=0.855 Az status=0008 Ze status=0009 06:12:58 Check angles 06:12:58 SkyScan query 06:12:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.085<-13339 Statuses=0008 0009 06:12:58 Msec=1500 True Az=40.995 Ze=-20.085 Az status=0008 Ze status=0009 06:12:59 Check angles 06:12:59 SkyScan query 06:12:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.52<-14568 Statuses=0008 0009 06:12:59 Msec=2250 True Az=40.995 Ze=-38.52 Az status=0008 Ze status=0009 06:12:59 Check angles 06:12:59 SkyScan query 06:13:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 06:13:00 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 06:13:00 Message to Master queued w/err=0: serial=265032 error=0 06:13:05 Received message from Master: op=Filter serial=265033 06:13:05 Color wheel filter change from 0 to 0 06:13:05 FLIGetFilterPos err=0 currentPosition=0 06:13:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:05 Filter is already there-color wheel unchanged 06:13:05 Received message from Master: op=Shutter serial=265034 06:13:05 Shutter LASER close 06:13:05 Received message from Camera: op=State serial=265036 06:13:05 GetSingleValue result=40 Value=cccccccc 06:13:05 SkyScan query 06:13:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:13:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:06 Parameters OK 06:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:06 Set A/D data flow result=40 06:13:06 Set A/D channel type result=40 06:13:06 Set A/D encoding result=40 06:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:06 Set channel filter=0.000000e+000 result=40 06:13:06 Config A/D Result=40 06:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:06 Get A/D filter: -9.255963e+061 result=40 06:13:06 Get A/D value=-858993460 result=40 06:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:06 Parameters OK 06:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:06 Set A/D data flow result=40 06:13:06 Set A/D channel type result=40 06:13:06 Set A/D encoding result=40 06:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:06 Set channel filter=0.000000e+000 result=40 06:13:06 Config A/D Result=40 06:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:06 Get A/D filter: -9.255963e+061 result=40 06:13:06 Get A/D value=-858993460 result=40 06:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:06 Aux= 06:13:06 Message to Camera, serial 265036 queued 06:13:42 Received message from Master: op=PointingHead serial=265049 06:13:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:13:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:13:43 Point started: ret=0 06:13:43 point_skyscan result=0 06:13:44 Check angles 06:13:44 SkyScan query 06:13:44 SkyScan query done: ret=0 az=64.14<-4276 ze=-68.43<-16562 Statuses=0009 0009 06:13:44 Msec=0 True Az=64.14 Ze=-68.43 Az status=0009 Ze status=0009 06:13:44 Check angles 06:13:44 SkyScan query 06:13:45 SkyScan query done: ret=0 az=81.48<-5432 ze=-89.43<-17962 Statuses=0009 0009 06:13:45 Msec=750 True Az=81.48 Ze=-89.43 Az status=0009 Ze status=0009 06:13:45 Check angles 06:13:45 SkyScan query 06:13:46 SkyScan query done: ret=0 az=99.525<-6635 ze=-110.82<-19388 Statuses=0009 0009 06:13:46 Msec=1500 True Az=99.525 Ze=-110.82 Az status=0009 Ze status=0009 06:13:46 Check angles 06:13:46 SkyScan query 06:13:46 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.745<-20783 Statuses=0009 0009 06:13:46 Msec=2250 True Az=116.925 Ze=-131.745 Az status=0009 Ze status=0009 06:13:47 Check angles 06:13:47 SkyScan query 06:13:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 06:13:47 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 06:13:47 Check angles 06:13:47 SkyScan query 06:13:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 06:13:48 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 06:13:48 Message to Master queued w/err=0: serial=265049 error=0 06:13:53 Received message from Master: op=Filter serial=265050 06:13:53 Color wheel filter change from 0 to 0 06:13:53 FLIGetFilterPos err=0 currentPosition=0 06:13:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:53 Filter is already there-color wheel unchanged 06:13:53 Received message from Master: op=Shutter serial=265051 06:13:53 Shutter LASER close 06:13:53 Received message from Camera: op=State serial=265053 06:13:53 GetSingleValue result=40 Value=cccccccc 06:13:53 SkyScan query 06:13:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:13:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:54 Parameters OK 06:13:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:54 Set A/D data flow result=40 06:13:54 Set A/D channel type result=40 06:13:54 Set A/D encoding result=40 06:13:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:54 Set channel filter=0.000000e+000 result=40 06:13:54 Config A/D Result=40 06:13:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:54 Get A/D filter: -9.255963e+061 result=40 06:13:54 Get A/D value=-858993460 result=40 06:13:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:54 Parameters OK 06:13:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:54 Set A/D data flow result=40 06:13:54 Set A/D channel type result=40 06:13:54 Set A/D encoding result=40 06:13:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:54 Set channel filter=0.000000e+000 result=40 06:13:54 Config A/D Result=40 06:13:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:54 Get A/D filter: -9.255963e+061 result=40 06:13:54 Get A/D value=-858993460 result=40 06:13:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:54 Aux= 06:13:54 Message to Camera, serial 265053 queued 06:14:31 Received message from Master: op=PointingHead serial=265066 06:14:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:14:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:14:31 Point started: ret=0 06:14:31 point_skyscan result=0 06:14:32 Check angles 06:14:32 SkyScan query 06:14:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 06:14:32 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 06:14:32 Check angles 06:14:32 SkyScan query 06:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:14:33 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:14:33 Message to Master queued w/err=0: serial=265066 error=0 06:14:38 Received message from Master: op=Filter serial=265067 06:14:38 Color wheel filter change from 0 to 0 06:14:38 FLIGetFilterPos err=0 currentPosition=0 06:14:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:38 Filter is already there-color wheel unchanged 06:14:38 Received message from Master: op=Shutter serial=265068 06:14:38 Shutter LASER open 06:14:38 Received message from Camera: op=State serial=265070 06:14:38 GetSingleValue result=40 Value=cccccccc 06:14:38 SkyScan query 06:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:14:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:39 Parameters OK 06:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:39 Set A/D data flow result=40 06:14:39 Set A/D channel type result=40 06:14:39 Set A/D encoding result=40 06:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:39 Set channel filter=0.000000e+000 result=40 06:14:39 Config A/D Result=40 06:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:39 Get A/D filter: -9.255963e+061 result=40 06:14:39 Get A/D value=-858993460 result=40 06:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:39 Parameters OK 06:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:39 Set A/D data flow result=40 06:14:39 Set A/D channel type result=40 06:14:39 Set A/D encoding result=40 06:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:39 Set channel filter=0.000000e+000 result=40 06:14:39 Config A/D Result=40 06:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:39 Get A/D filter: -9.255963e+061 result=40 06:14:39 Get A/D value=-858993460 result=40 06:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:39 Aux= 06:14:39 Message to Camera, serial 265070 queued 06:14:47 Received message from Master: op=Shutter serial=265080 06:14:47 Shutter LASER close 06:14:48 Received message from Master: op=PointingHead serial=265084 06:14:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:14:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:14:48 Point started: ret=0 06:14:48 point_skyscan result=0 06:14:49 Check angles 06:14:49 SkyScan query 06:14:50 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.205<-21547 Statuses=0009 0009 06:14:50 Msec=0 True Az=136.11 Ze=-143.205 Az status=0009 Ze status=0009 06:14:50 Check angles 06:14:50 SkyScan query 06:14:50 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.205<-20147 Statuses=0009 0009 06:14:50 Msec=750 True Az=153.495 Ze=-122.205 Az status=0009 Ze status=0009 06:14:51 Check angles 06:14:51 SkyScan query 06:14:51 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.34<-18756 Statuses=0009 0009 06:14:51 Msec=1500 True Az=170.97 Ze=-101.34 Az status=0009 Ze status=0009 06:14:51 Check angles 06:14:51 SkyScan query 06:14:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.37<-17358 Statuses=0008 0009 06:14:52 Msec=2250 True Az=175.995 Ze=-80.37 Az status=0008 Ze status=0009 06:14:52 Check angles 06:14:52 SkyScan query 06:14:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.4<-15960 Statuses=0008 0009 06:14:53 Msec=3000 True Az=175.995 Ze=-59.4 Az status=0008 Ze status=0009 06:14:53 Check angles 06:14:53 SkyScan query 06:14:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:14:53 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:14:53 Message to Master queued w/err=0: serial=265084 error=0 06:14:58 Received message from Master: op=Filter serial=265085 06:14:58 Color wheel filter change from 0 to 0 06:14:58 FLIGetFilterPos err=0 currentPosition=0 06:14:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:58 Filter is already there-color wheel unchanged 06:14:59 Received message from Master: op=Shutter serial=265086 06:14:59 Shutter LASER close 06:14:59 Received message from Camera: op=State serial=265088 06:14:59 GetSingleValue result=40 Value=cccccccc 06:14:59 SkyScan query 06:14:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:14:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:59 Parameters OK 06:14:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:59 Set A/D data flow result=40 06:14:59 Set A/D channel type result=40 06:14:59 Set A/D encoding result=40 06:14:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:59 Set channel filter=0.000000e+000 result=40 06:14:59 Config A/D Result=40 06:14:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:59 Get A/D filter: -9.255963e+061 result=40 06:14:59 Get A/D value=-858993460 result=40 06:14:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:59 Parameters OK 06:14:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:59 Set A/D data flow result=40 06:14:59 Set A/D channel type result=40 06:14:59 Set A/D encoding result=40 06:14:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:59 Set channel filter=0.000000e+000 result=40 06:14:59 Config A/D Result=40 06:14:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:59 Get A/D filter: -9.255963e+061 result=40 06:14:59 Get A/D value=-858993460 result=40 06:14:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:59 Aux= 06:14:59 Message to Camera, serial 265088 queued 06:15:27 Received message from Master: op=Identify serial=265089 06:15:36 Received message from Master: op=PointingHead serial=265104 06:15:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:15:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:15:36 Point started: ret=0 06:15:36 point_skyscan result=0 06:15:37 Check angles 06:15:37 SkyScan query 06:15:38 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.285<-13419 Statuses=0009 0009 06:15:38 Msec=0 True Az=152.715 Ze=-21.285 Az status=0009 Ze status=0009 [UTC 2018-12-19 06:15:38] 06:15:38 Check angles 06:15:38 SkyScan query 06:15:39 SkyScan query done: ret=0 az=133.695<-8913 ze=1.41<-11906 Statuses=0009 0009 06:15:39 Msec=750 True Az=133.695 Ze=1.41 Az status=0009 Ze status=0009 06:15:39 Check angles 06:15:39 SkyScan query 06:15:39 SkyScan query done: ret=0 az=117.615<-7841 ze=20.595<-10627 Statuses=0009 0009 06:15:39 Msec=1500 True Az=117.615 Ze=20.595 Az status=0009 Ze status=0009 06:15:39 Check angles 06:15:39 SkyScan query 06:15:40 SkyScan query done: ret=0 az=100.29<-6686 ze=41.565<-9229 Statuses=0009 0009 06:15:40 Msec=2250 True Az=100.29 Ze=41.565 Az status=0009 Ze status=0009 06:15:40 Check angles 06:15:40 SkyScan query 06:15:41 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 06:15:41 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 06:15:41 Check angles 06:15:41 SkyScan query 06:15:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:15:42 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:15:42 Message to Master queued w/err=0: serial=265104 error=0 06:15:47 Received message from Master: op=Filter serial=265105 06:15:47 Color wheel filter change from 0 to 0 06:15:47 FLIGetFilterPos err=0 currentPosition=0 06:15:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:47 Filter is already there-color wheel unchanged 06:15:47 Received message from Master: op=Shutter serial=265106 06:15:47 Shutter LASER close 06:15:47 Received message from Camera: op=State serial=265108 06:15:47 GetSingleValue result=40 Value=cccccccc 06:15:47 SkyScan query 06:15:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:15:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:47 Parameters OK 06:15:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:47 Set A/D data flow result=40 06:15:47 Set A/D channel type result=40 06:15:47 Set A/D encoding result=40 06:15:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:47 Set channel filter=0.000000e+000 result=40 06:15:47 Config A/D Result=40 06:15:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:47 Get A/D filter: -9.255963e+061 result=40 06:15:47 Get A/D value=-858993460 result=40 06:15:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:47 Parameters OK 06:15:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:47 Set A/D data flow result=40 06:15:47 Set A/D channel type result=40 06:15:47 Set A/D encoding result=40 06:15:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:47 Set channel filter=0.000000e+000 result=40 06:15:47 Config A/D Result=40 06:15:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:47 Get A/D filter: -9.255963e+061 result=40 06:15:47 Get A/D value=-858993460 result=40 06:15:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:47 Aux= 06:15:47 Message to Camera, serial 265108 queued [UTC 2018-12-19 06:15:52] 06:16:24 Received message from Master: op=PointingHead serial=265121 06:16:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:16:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:16:25 Point started: ret=0 06:16:25 point_skyscan result=0 06:16:25 Check angles 06:16:25 SkyScan query 06:16:26 SkyScan query done: ret=0 az=85.98<-5732 ze=21.57<-10562 Statuses=0008 0009 06:16:26 Msec=0 True Az=85.98 Ze=21.57 Az status=0008 Ze status=0009 06:16:26 Check angles 06:16:26 SkyScan query 06:16:27 SkyScan query done: ret=0 az=85.995<-5733 ze=0.225<-11985 Statuses=0008 0009 06:16:27 Msec=750 True Az=85.995 Ze=0.225 Az status=0008 Ze status=0009 06:16:27 Check angles 06:16:27 SkyScan query 06:16:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.165<-13411 Statuses=0008 0009 06:16:27 Msec=1500 True Az=85.995 Ze=-21.165 Az status=0008 Ze status=0009 06:16:28 Check angles 06:16:28 SkyScan query 06:16:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.15<-14810 Statuses=0008 0009 06:16:28 Msec=2250 True Az=85.995 Ze=-42.15 Az status=0008 Ze status=0009 06:16:28 Check angles 06:16:28 SkyScan query 06:16:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:16:29 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:16:29 Message to Master queued w/err=0: serial=265121 error=0 06:16:34 Received message from Master: op=Filter serial=265122 06:16:34 Color wheel filter change from 0 to 0 06:16:34 FLIGetFilterPos err=0 currentPosition=0 06:16:34 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:34 Filter is already there-color wheel unchanged 06:16:34 Received message from Master: op=Shutter serial=265123 06:16:34 Shutter LASER close 06:16:34 Received message from Camera: op=State serial=265125 06:16:34 GetSingleValue result=40 Value=cccccccc 06:16:34 SkyScan query 06:16:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:16:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:35 Parameters OK 06:16:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:35 Set A/D data flow result=40 06:16:35 Set A/D channel type result=40 06:16:35 Set A/D encoding result=40 06:16:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:35 Set channel filter=0.000000e+000 result=40 06:16:35 Config A/D Result=40 06:16:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:35 Get A/D filter: -9.255963e+061 result=40 06:16:35 Get A/D value=-858993460 result=40 06:16:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:35 Parameters OK 06:16:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:35 Set A/D data flow result=40 06:16:35 Set A/D channel type result=40 06:16:35 Set A/D encoding result=40 06:16:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:35 Set channel filter=0.000000e+000 result=40 06:16:35 Config A/D Result=40 06:16:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:35 Get A/D filter: -9.255963e+061 result=40 06:16:35 Get A/D value=-858993460 result=40 06:16:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:35 Aux= 06:16:35 Message to Camera, serial 265125 queued 06:17:12 Received message from Master: op=PointingHead serial=265138 06:17:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:17:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:17:12 Point started: ret=0 06:17:12 point_skyscan result=0 06:17:13 Check angles 06:17:13 SkyScan query 06:17:13 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.255<-17417 Statuses=0009 0009 06:17:13 Msec=0 True Az=109.14 Ze=-81.255 Az status=0009 Ze status=0009 06:17:14 Check angles 06:17:14 SkyScan query 06:17:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 06:17:14 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 06:17:14 Check angles 06:17:14 SkyScan query 06:17:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 06:17:15 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 06:17:15 Check angles 06:17:15 SkyScan query 06:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 06:17:16 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 06:17:16 Check angles 06:17:16 SkyScan query 06:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 06:17:16 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 06:17:17 Check angles 06:17:17 SkyScan query 06:17:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 06:17:17 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 06:17:17 Message to Master queued w/err=0: serial=265138 error=0 06:17:22 Received message from Master: op=Filter serial=265139 06:17:22 Color wheel filter change from 0 to 0 06:17:22 FLIGetFilterPos err=0 currentPosition=0 06:17:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:22 Filter is already there-color wheel unchanged 06:17:22 Received message from Master: op=Shutter serial=265140 06:17:22 Shutter LASER open 06:17:22 Received message from Camera: op=State serial=265142 06:17:22 GetSingleValue result=40 Value=cccccccc 06:17:22 SkyScan query 06:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:17:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:23 Parameters OK 06:17:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:23 Set A/D data flow result=40 06:17:23 Set A/D channel type result=40 06:17:23 Set A/D encoding result=40 06:17:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:23 Set channel filter=0.000000e+000 result=40 06:17:23 Config A/D Result=40 06:17:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:23 Get A/D filter: -9.255963e+061 result=40 06:17:23 Get A/D value=-858993460 result=40 06:17:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:23 Parameters OK 06:17:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:23 Set A/D data flow result=40 06:17:23 Set A/D channel type result=40 06:17:23 Set A/D encoding result=40 06:17:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:23 Set channel filter=0.000000e+000 result=40 06:17:23 Config A/D Result=40 06:17:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:23 Get A/D filter: -9.255963e+061 result=40 06:17:23 Get A/D value=-858993460 result=40 06:17:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:23 Aux= 06:17:23 Message to Camera, serial 265142 queued 06:17:31 Received message from Master: op=Shutter serial=265152 06:17:32 Shutter LASER close 06:17:32 Received message from Master: op=PointingHead serial=265156 06:17:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:17:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:17:32 Point started: ret=0 06:17:32 point_skyscan result=0 06:17:33 Check angles 06:17:33 SkyScan query 06:17:34 SkyScan query done: ret=0 az=89.64<-5976 ze=156.975<-1535 Statuses=0009 0009 06:17:34 Msec=0 True Az=89.64 Ze=156.975 Az status=0009 Ze status=0009 06:17:34 Check angles 06:17:34 SkyScan query 06:17:34 SkyScan query done: ret=0 az=72.285<-4819 ze=136.05<-2930 Statuses=0009 0009 06:17:34 Msec=750 True Az=72.285 Ze=136.05 Az status=0009 Ze status=0009 06:17:35 Check angles 06:17:35 SkyScan query 06:17:35 SkyScan query done: ret=0 az=54.78<-3652 ze=115.08<-4328 Statuses=0009 0009 06:17:35 Msec=1500 True Az=54.78 Ze=115.08 Az status=0009 Ze status=0009 06:17:35 Check angles 06:17:35 SkyScan query 06:17:36 SkyScan query done: ret=0 az=40.995<-2733 ze=94.125<-5725 Statuses=0009 0009 06:17:36 Msec=2250 True Az=40.995 Ze=94.125 Az status=0009 Ze status=0009 06:17:36 Check angles 06:17:36 SkyScan query 06:17:37 SkyScan query done: ret=0 az=40.995<-2733 ze=73.14<-7124 Statuses=0008 0009 06:17:37 Msec=3000 True Az=40.995 Ze=73.14 Az status=0008 Ze status=0009 06:17:37 Check angles 06:17:37 SkyScan query 06:17:37 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 06:17:37 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 06:17:38 Check angles 06:17:38 SkyScan query 06:17:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:17:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:17:38 Message to Master queued w/err=0: serial=265156 error=0 06:17:43 Received message from Master: op=Filter serial=265157 06:17:43 Color wheel filter change from 0 to 0 06:17:43 FLIGetFilterPos err=0 currentPosition=0 06:17:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:43 Filter is already there-color wheel unchanged 06:17:43 Received message from Master: op=Shutter serial=265158 06:17:43 Shutter LASER close 06:17:43 Received message from Camera: op=State serial=265160 06:17:43 GetSingleValue result=40 Value=cccccccc 06:17:43 SkyScan query 06:17:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:17:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:44 Parameters OK 06:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:44 Set A/D data flow result=40 06:17:44 Set A/D channel type result=40 06:17:44 Set A/D encoding result=40 06:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:44 Set channel filter=0.000000e+000 result=40 06:17:44 Config A/D Result=40 06:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:44 Get A/D filter: -9.255963e+061 result=40 06:17:44 Get A/D value=-858993460 result=40 06:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:44 Parameters OK 06:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:44 Set A/D data flow result=40 06:17:44 Set A/D channel type result=40 06:17:44 Set A/D encoding result=40 06:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:44 Set channel filter=0.000000e+000 result=40 06:17:44 Config A/D Result=40 06:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:44 Get A/D filter: -9.255963e+061 result=40 06:17:44 Get A/D value=-858993460 result=40 06:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:44 Aux= 06:17:44 Message to Camera, serial 265160 queued 06:18:21 Received message from Master: op=PointingHead serial=265173 06:18:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:18:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:18:21 Point started: ret=0 06:18:21 point_skyscan result=0 06:18:22 Check angles 06:18:22 SkyScan query 06:18:23 SkyScan query done: ret=0 az=40.995<-2733 ze=21.54<-10564 Statuses=0008 0009 06:18:23 Msec=0 True Az=40.995 Ze=21.54 Az status=0008 Ze status=0009 06:18:23 Check angles 06:18:23 SkyScan query 06:18:23 SkyScan query done: ret=0 az=40.995<-2733 ze=0.585<-11961 Statuses=0008 0009 06:18:23 Msec=750 True Az=40.995 Ze=0.585 Az status=0008 Ze status=0009 06:18:24 Check angles 06:18:24 SkyScan query 06:18:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.355<-13357 Statuses=0008 0009 06:18:24 Msec=1500 True Az=40.995 Ze=-20.355 Az status=0008 Ze status=0009 06:18:24 Check angles 06:18:24 SkyScan query 06:18:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 06:18:25 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 06:18:25 Check angles 06:18:25 SkyScan query 06:18:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 06:18:26 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 06:18:26 Message to Master queued w/err=0: serial=265173 error=0 06:18:31 Received message from Master: op=Filter serial=265174 06:18:31 Color wheel filter change from 0 to 0 06:18:31 FLIGetFilterPos err=0 currentPosition=0 06:18:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:31 Filter is already there-color wheel unchanged 06:18:31 Received message from Master: op=Shutter serial=265175 06:18:31 Shutter LASER close 06:18:31 Received message from Camera: op=State serial=265177 06:18:31 GetSingleValue result=40 Value=cccccccc 06:18:31 SkyScan query 06:18:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:18:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:32 Parameters OK 06:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:32 Set A/D data flow result=40 06:18:32 Set A/D channel type result=40 06:18:32 Set A/D encoding result=40 06:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:32 Set channel filter=0.000000e+000 result=40 06:18:32 Config A/D Result=40 06:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:32 Get A/D filter: -9.255963e+061 result=40 06:18:32 Get A/D value=-858993460 result=40 06:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:32 Parameters OK 06:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:32 Set A/D data flow result=40 06:18:32 Set A/D channel type result=40 06:18:32 Set A/D encoding result=40 06:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:32 Set channel filter=0.000000e+000 result=40 06:18:32 Config A/D Result=40 06:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:32 Get A/D filter: -9.255963e+061 result=40 06:18:32 Get A/D value=-858993460 result=40 06:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:32 Aux= 06:18:32 Message to Camera, serial 265177 queued 06:19:08 Received message from Master: op=PointingHead serial=265190 06:19:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:19:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:19:09 Point started: ret=0 06:19:09 point_skyscan result=0 06:19:09 Check angles 06:19:09 SkyScan query 06:19:10 SkyScan query done: ret=0 az=64.11<-4274 ze=-68.415<-16561 Statuses=0009 0009 06:19:10 Msec=0 True Az=64.11 Ze=-68.415 Az status=0009 Ze status=0009 06:19:10 Check angles 06:19:10 SkyScan query 06:19:11 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.4<-17960 Statuses=0009 0009 06:19:11 Msec=750 True Az=81.51 Ze=-89.4 Az status=0009 Ze status=0009 06:19:11 Check angles 06:19:11 SkyScan query 06:19:12 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.34<-19356 Statuses=0009 0009 06:19:12 Msec=1500 True Az=98.985 Ze=-110.34 Az status=0009 Ze status=0009 06:19:12 Check angles 06:19:12 SkyScan query 06:19:12 SkyScan query done: ret=0 az=116.535<-7769 ze=-131.295<-20753 Statuses=0009 0009 06:19:12 Msec=2250 True Az=116.535 Ze=-131.295 Az status=0009 Ze status=0009 06:19:12 Check angles 06:19:12 SkyScan query 06:19:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 06:19:13 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 06:19:13 Check angles 06:19:13 SkyScan query 06:19:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 06:19:14 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 06:19:14 Message to Master queued w/err=0: serial=265190 error=0 06:19:19 Received message from Master: op=Filter serial=265191 06:19:19 Color wheel filter change from 0 to 0 06:19:19 FLIGetFilterPos err=0 currentPosition=0 06:19:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:19 Filter is already there-color wheel unchanged 06:19:19 Received message from Master: op=Shutter serial=265192 06:19:19 Shutter LASER close 06:19:19 Received message from Camera: op=State serial=265194 06:19:19 GetSingleValue result=40 Value=cccccccc 06:19:19 SkyScan query 06:19:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:19:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:20 Parameters OK 06:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:20 Set A/D data flow result=40 06:19:20 Set A/D channel type result=40 06:19:20 Set A/D encoding result=40 06:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:20 Set channel filter=0.000000e+000 result=40 06:19:20 Config A/D Result=40 06:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:20 Get A/D filter: -9.255963e+061 result=40 06:19:20 Get A/D value=-858993460 result=40 06:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:20 Parameters OK 06:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:20 Set A/D data flow result=40 06:19:20 Set A/D channel type result=40 06:19:20 Set A/D encoding result=40 06:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:20 Set channel filter=0.000000e+000 result=40 06:19:20 Config A/D Result=40 06:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:20 Get A/D filter: -9.255963e+061 result=40 06:19:20 Get A/D value=-858993460 result=40 06:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:20 Aux= 06:19:20 Message to Camera, serial 265194 queued 06:19:56 Received message from Master: op=PointingHead serial=265207 06:19:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:19:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:19:57 Point started: ret=0 06:19:57 point_skyscan result=0 06:19:58 Check angles 06:19:58 SkyScan query 06:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0009 0009 06:19:58 Msec=0 True Az=112.995 Ze=-171.465 Az status=0009 Ze status=0009 06:19:58 Check angles 06:19:58 SkyScan query 06:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:19:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:19:59 Message to Master queued w/err=0: serial=265207 error=0 06:20:04 Received message from Master: op=Filter serial=265208 06:20:04 Color wheel filter change from 0 to 0 06:20:04 FLIGetFilterPos err=0 currentPosition=0 06:20:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:04 Filter is already there-color wheel unchanged 06:20:04 Received message from Master: op=Shutter serial=265209 06:20:04 Shutter LASER open 06:20:04 Received message from Camera: op=State serial=265211 06:20:04 GetSingleValue result=40 Value=cccccccc 06:20:04 SkyScan query 06:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:20:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:05 Parameters OK 06:20:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:05 Set A/D data flow result=40 06:20:05 Set A/D channel type result=40 06:20:05 Set A/D encoding result=40 06:20:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:05 Set channel filter=0.000000e+000 result=40 06:20:05 Config A/D Result=40 06:20:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:05 Get A/D filter: -9.255963e+061 result=40 06:20:05 Get A/D value=-858993460 result=40 06:20:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:05 Parameters OK 06:20:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:05 Set A/D data flow result=40 06:20:05 Set A/D channel type result=40 06:20:05 Set A/D encoding result=40 06:20:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:05 Set channel filter=0.000000e+000 result=40 06:20:05 Config A/D Result=40 06:20:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:05 Get A/D filter: -9.255963e+061 result=40 06:20:05 Get A/D value=-858993460 result=40 06:20:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:05 Aux= 06:20:05 Message to Camera, serial 265211 queued 06:20:13 Received message from Master: op=Shutter serial=265221 06:20:13 Shutter LASER close 06:20:14 Received message from Master: op=PointingHead serial=265225 06:20:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:20:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:20:14 Point started: ret=0 06:20:14 point_skyscan result=0 06:20:15 Check angles 06:20:15 SkyScan query 06:20:15 SkyScan query done: ret=0 az=136.125<-9075 ze=-143.145<-21543 Statuses=0009 0009 06:20:15 Msec=0 True Az=136.125 Ze=-143.145 Az status=0009 Ze status=0009 06:20:16 Check angles 06:20:16 SkyScan query 06:20:16 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.175<-20145 Statuses=0009 0009 06:20:16 Msec=750 True Az=153.645 Ze=-122.175 Az status=0009 Ze status=0009 06:20:16 Check angles 06:20:16 SkyScan query 06:20:17 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.265<-18751 Statuses=0009 0009 06:20:17 Msec=1500 True Az=171.135 Ze=-101.265 Az status=0009 Ze status=0009 06:20:17 Check angles 06:20:17 SkyScan query 06:20:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.325<-17355 Statuses=0008 0009 06:20:18 Msec=2250 True Az=175.995 Ze=-80.325 Az status=0008 Ze status=0009 06:20:18 Check angles 06:20:18 SkyScan query 06:20:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.325<-15955 Statuses=0008 0009 06:20:18 Msec=3000 True Az=175.995 Ze=-59.325 Az status=0008 Ze status=0009 06:20:19 Check angles 06:20:19 SkyScan query 06:20:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:20:19 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:20:19 Message to Master queued w/err=0: serial=265225 error=0 06:20:24 Received message from Master: op=Filter serial=265226 06:20:24 Color wheel filter change from 0 to 0 06:20:24 FLIGetFilterPos err=0 currentPosition=0 06:20:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:24 Filter is already there-color wheel unchanged 06:20:24 Received message from Master: op=Shutter serial=265227 06:20:24 Shutter LASER close 06:20:25 Received message from Camera: op=State serial=265229 06:20:25 GetSingleValue result=40 Value=cccccccc 06:20:25 SkyScan query 06:20:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:20:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:25 Parameters OK 06:20:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:25 Set A/D data flow result=40 06:20:25 Set A/D channel type result=40 06:20:25 Set A/D encoding result=40 06:20:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:25 Set channel filter=0.000000e+000 result=40 06:20:25 Config A/D Result=40 06:20:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:25 Get A/D filter: -9.255963e+061 result=40 06:20:25 Get A/D value=-858993460 result=40 06:20:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:25 Parameters OK 06:20:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:25 Set A/D data flow result=40 06:20:25 Set A/D channel type result=40 06:20:25 Set A/D encoding result=40 06:20:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:25 Set channel filter=0.000000e+000 result=40 06:20:25 Config A/D Result=40 06:20:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:25 Get A/D filter: -9.255963e+061 result=40 06:20:25 Get A/D value=-858993460 result=40 06:20:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:25 Aux= 06:20:25 Message to Camera, serial 265229 queued 06:21:01 Received message from Master: op=PointingHead serial=265241 06:21:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:21:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:21:01 Point started: ret=0 06:21:01 point_skyscan result=0 06:21:02 Check angles 06:21:02 SkyScan query 06:21:03 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.36<-13424 Statuses=0009 0009 06:21:03 Msec=0 True Az=152.715 Ze=-21.36 Az status=0009 Ze status=0009 06:21:03 Check angles 06:21:03 SkyScan query 06:21:04 SkyScan query done: ret=0 az=134.79<-8986 ze=0.015<-11999 Statuses=0009 0009 06:21:04 Msec=750 True Az=134.79 Ze=0.015 Az status=0009 Ze status=0009 06:21:04 Check angles 06:21:04 SkyScan query 06:21:04 SkyScan query done: ret=0 az=117.345<-7823 ze=21.015<-10599 Statuses=0009 0009 06:21:04 Msec=1500 True Az=117.345 Ze=21.015 Az status=0009 Ze status=0009 06:21:04 Check angles 06:21:04 SkyScan query 06:21:05 SkyScan query done: ret=0 az=99.825<-6655 ze=41.925<-9205 Statuses=0009 0009 06:21:05 Msec=2250 True Az=99.825 Ze=41.925 Az status=0009 Ze status=0009 06:21:05 Check angles 06:21:05 SkyScan query 06:21:06 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 06:21:06 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 06:21:06 Check angles 06:21:06 SkyScan query 06:21:07 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 06:21:07 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 06:21:07 Message to Master queued w/err=0: serial=265241 error=0 06:21:12 Received message from Master: op=Filter serial=265242 06:21:12 Color wheel filter change from 0 to 0 06:21:12 FLIGetFilterPos err=0 currentPosition=0 06:21:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:12 Filter is already there-color wheel unchanged 06:21:12 Received message from Master: op=Shutter serial=265243 06:21:12 Shutter LASER close 06:21:12 Received message from Camera: op=State serial=265245 06:21:12 GetSingleValue result=40 Value=cccccccc 06:21:12 SkyScan query 06:21:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:21:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:12 Parameters OK 06:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:12 Set A/D data flow result=40 06:21:12 Set A/D channel type result=40 06:21:12 Set A/D encoding result=40 06:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:12 Set channel filter=0.000000e+000 result=40 06:21:12 Config A/D Result=40 06:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:12 Get A/D filter: -9.255963e+061 result=40 06:21:12 Get A/D value=-858993460 result=40 06:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:12 Parameters OK 06:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:12 Set A/D data flow result=40 06:21:12 Set A/D channel type result=40 06:21:12 Set A/D encoding result=40 06:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:12 Set channel filter=0.000000e+000 result=40 06:21:12 Config A/D Result=40 06:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:12 Get A/D filter: -9.255963e+061 result=40 06:21:12 Get A/D value=-858993460 result=40 06:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:12 Aux= 06:21:12 Message to Camera, serial 265245 queued 06:21:49 Received message from Master: op=PointingHead serial=265258 06:21:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:21:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:21:50 Point started: ret=0 06:21:50 point_skyscan result=0 06:21:50 Check angles 06:21:50 SkyScan query 06:21:51 SkyScan query done: ret=0 az=85.995<-5733 ze=21.6<-10560 Statuses=0008 0009 06:21:51 Msec=0 True Az=85.995 Ze=21.6 Az status=0008 Ze status=0009 06:21:51 Check angles 06:21:51 SkyScan query 06:21:52 SkyScan query done: ret=0 az=86.01<-5734 ze=0.24<-11984 Statuses=0008 0009 06:21:52 Msec=750 True Az=86.01 Ze=0.24 Az status=0008 Ze status=0009 06:21:52 Check angles 06:21:52 SkyScan query 06:21:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.7<-13380 Statuses=0008 0009 06:21:52 Msec=1500 True Az=85.995 Ze=-20.7 Az status=0008 Ze status=0009 06:21:53 Check angles 06:21:53 SkyScan query 06:21:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.105<-14807 Statuses=0008 0009 06:21:53 Msec=2250 True Az=85.995 Ze=-42.105 Az status=0008 Ze status=0009 06:21:53 Check angles 06:21:53 SkyScan query 06:21:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:21:54 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:21:54 Message to Master queued w/err=0: serial=265258 error=0 06:21:59 Received message from Master: op=Filter serial=265259 06:21:59 Color wheel filter change from 0 to 0 06:21:59 FLIGetFilterPos err=0 currentPosition=0 06:21:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:59 Filter is already there-color wheel unchanged 06:21:59 Received message from Master: op=Shutter serial=265260 06:21:59 Shutter LASER close 06:21:59 Received message from Camera: op=State serial=265262 06:21:59 GetSingleValue result=40 Value=cccccccc 06:21:59 SkyScan query 06:22:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:22:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:00 Parameters OK 06:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:00 Set A/D data flow result=40 06:22:00 Set A/D channel type result=40 06:22:00 Set A/D encoding result=40 06:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:00 Set channel filter=0.000000e+000 result=40 06:22:00 Config A/D Result=40 06:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:00 Get A/D filter: -9.255963e+061 result=40 06:22:00 Get A/D value=-858993460 result=40 06:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:00 Parameters OK 06:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:00 Set A/D data flow result=40 06:22:00 Set A/D channel type result=40 06:22:00 Set A/D encoding result=40 06:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:00 Set channel filter=0.000000e+000 result=40 06:22:00 Config A/D Result=40 06:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:00 Get A/D filter: -9.255963e+061 result=40 06:22:00 Get A/D value=-858993460 result=40 06:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:00 Aux= 06:22:00 Message to Camera, serial 265262 queued 06:22:37 Received message from Master: op=PointingHead serial=265275 06:22:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:22:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:22:37 Point started: ret=0 06:22:37 point_skyscan result=0 06:22:38 Check angles 06:22:38 SkyScan query 06:22:38 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.12<-17408 Statuses=0009 0009 06:22:38 Msec=0 True Az=109.02 Ze=-81.12 Az status=0009 Ze status=0009 06:22:38 Check angles 06:22:38 SkyScan query 06:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.105<-18807 Statuses=0008 0009 06:22:39 Msec=750 True Az=112.995 Ze=-102.105 Az status=0008 Ze status=0009 06:22:39 Check angles 06:22:39 SkyScan query 06:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.51<-20234 Statuses=0008 0009 06:22:40 Msec=1500 True Az=112.995 Ze=-123.51 Az status=0008 Ze status=0009 06:22:40 Check angles 06:22:40 SkyScan query 06:22:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 06:22:41 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 06:22:41 Check angles 06:22:41 SkyScan query 06:22:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 06:22:41 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 06:22:41 Check angles 06:22:41 SkyScan query 06:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:22:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:22:42 Message to Master queued w/err=0: serial=265275 error=0 06:22:47 Received message from Master: op=Filter serial=265276 06:22:47 Color wheel filter change from 0 to 0 06:22:47 FLIGetFilterPos err=0 currentPosition=0 06:22:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:47 Filter is already there-color wheel unchanged 06:22:47 Received message from Master: op=Shutter serial=265277 06:22:47 Shutter LASER open 06:22:47 Received message from Camera: op=State serial=265279 06:22:47 GetSingleValue result=40 Value=cccccccc 06:22:47 SkyScan query 06:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:48 Parameters OK 06:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:48 Set A/D data flow result=40 06:22:48 Set A/D channel type result=40 06:22:48 Set A/D encoding result=40 06:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:48 Set channel filter=0.000000e+000 result=40 06:22:48 Config A/D Result=40 06:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:48 Get A/D filter: -9.255963e+061 result=40 06:22:48 Get A/D value=-858993460 result=40 06:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:48 Parameters OK 06:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:48 Set A/D data flow result=40 06:22:48 Set A/D channel type result=40 06:22:48 Set A/D encoding result=40 06:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:48 Set channel filter=0.000000e+000 result=40 06:22:48 Config A/D Result=40 06:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:48 Get A/D filter: -9.255963e+061 result=40 06:22:48 Get A/D value=-858993460 result=40 06:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:48 Aux= 06:22:48 Message to Camera, serial 265279 queued 06:22:56 Received message from Master: op=Shutter serial=265289 06:22:56 Shutter LASER close 06:22:57 Received message from Master: op=PointingHead serial=265293 06:22:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:22:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:22:57 Point started: ret=0 06:22:57 point_skyscan result=0 06:22:58 Check angles 06:22:58 SkyScan query 06:22:59 SkyScan query done: ret=0 az=89.445<-5963 ze=156.705<-1553 Statuses=0009 0009 06:22:59 Msec=0 True Az=89.445 Ze=156.705 Az status=0009 Ze status=0009 06:22:59 Check angles 06:22:59 SkyScan query 06:22:59 SkyScan query done: ret=0 az=72.015<-4801 ze=135.78<-2948 Statuses=0009 0009 06:22:59 Msec=750 True Az=72.015 Ze=135.78 Az status=0009 Ze status=0009 06:22:59 Check angles 06:22:59 SkyScan query 06:23:00 SkyScan query done: ret=0 az=54.54<-3636 ze=114.675<-4355 Statuses=0009 0009 06:23:00 Msec=1500 True Az=54.54 Ze=114.675 Az status=0009 Ze status=0009 06:23:00 Check angles 06:23:00 SkyScan query 06:23:01 SkyScan query done: ret=0 az=40.98<-2732 ze=93.87<-5742 Statuses=0009 0009 06:23:01 Msec=2250 True Az=40.98 Ze=93.87 Az status=0009 Ze status=0009 06:23:01 Check angles 06:23:01 SkyScan query 06:23:02 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 06:23:02 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 06:23:02 Check angles 06:23:02 SkyScan query 06:23:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 06:23:02 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 06:23:02 Check angles 06:23:02 SkyScan query 06:23:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:23:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:23:03 Message to Master queued w/err=0: serial=265293 error=0 06:23:08 Received message from Master: op=Filter serial=265294 06:23:08 Color wheel filter change from 0 to 0 06:23:08 FLIGetFilterPos err=0 currentPosition=0 06:23:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:08 Filter is already there-color wheel unchanged 06:23:08 Received message from Master: op=Shutter serial=265295 06:23:08 Shutter LASER close 06:23:08 Received message from Camera: op=State serial=265297 06:23:08 GetSingleValue result=40 Value=cccccccc 06:23:08 SkyScan query 06:23:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:23:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:09 Parameters OK 06:23:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:09 Set A/D data flow result=40 06:23:09 Set A/D channel type result=40 06:23:09 Set A/D encoding result=40 06:23:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:09 Set channel filter=0.000000e+000 result=40 06:23:09 Config A/D Result=40 06:23:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:09 Get A/D filter: -9.255963e+061 result=40 06:23:09 Get A/D value=-858993460 result=40 06:23:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:09 Parameters OK 06:23:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:09 Set A/D data flow result=40 06:23:09 Set A/D channel type result=40 06:23:09 Set A/D encoding result=40 06:23:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:09 Set channel filter=0.000000e+000 result=40 06:23:09 Config A/D Result=40 06:23:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:09 Get A/D filter: -9.255963e+061 result=40 06:23:09 Get A/D value=-858993460 result=40 06:23:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:09 Aux= 06:23:09 Message to Camera, serial 265297 queued 06:23:46 Received message from Master: op=PointingHead serial=265310 06:23:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:23:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:23:46 Point started: ret=0 06:23:46 point_skyscan result=0 06:23:47 Check angles 06:23:47 SkyScan query 06:23:48 SkyScan query done: ret=0 az=40.995<-2733 ze=21.45<-10570 Statuses=0008 0009 06:23:48 Msec=0 True Az=40.995 Ze=21.45 Az status=0008 Ze status=0009 06:23:48 Check angles 06:23:48 SkyScan query 06:23:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.03<-12002 Statuses=0008 0009 06:23:48 Msec=750 True Az=40.995 Ze=-0.03 Az status=0008 Ze status=0009 06:23:49 Check angles 06:23:49 SkyScan query 06:23:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.985<-13399 Statuses=0008 0009 06:23:49 Msec=1500 True Az=40.995 Ze=-20.985 Az status=0008 Ze status=0009 06:23:49 Check angles 06:23:49 SkyScan query 06:23:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 06:23:50 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 06:23:50 Check angles 06:23:50 SkyScan query 06:23:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 06:23:51 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 06:23:51 Message to Master queued w/err=0: serial=265310 error=0 06:23:56 Received message from Master: op=Filter serial=265311 06:23:56 Color wheel filter change from 0 to 0 06:23:56 FLIGetFilterPos err=0 currentPosition=0 06:23:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:56 Filter is already there-color wheel unchanged 06:23:56 Received message from Master: op=Shutter serial=265312 06:23:56 Shutter LASER close 06:23:56 Received message from Camera: op=State serial=265314 06:23:56 GetSingleValue result=40 Value=cccccccc 06:23:56 SkyScan query 06:23:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:23:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:56 Parameters OK 06:23:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:56 Set A/D data flow result=40 06:23:56 Set A/D channel type result=40 06:23:56 Set A/D encoding result=40 06:23:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:56 Set channel filter=0.000000e+000 result=40 06:23:56 Config A/D Result=40 06:23:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:56 Get A/D filter: -9.255963e+061 result=40 06:23:56 Get A/D value=-858993460 result=40 06:23:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:56 Parameters OK 06:23:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:56 Set A/D data flow result=40 06:23:56 Set A/D channel type result=40 06:23:56 Set A/D encoding result=40 06:23:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:56 Set channel filter=0.000000e+000 result=40 06:23:56 Config A/D Result=40 06:23:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:56 Get A/D filter: -9.255963e+061 result=40 06:23:56 Get A/D value=-858993460 result=40 06:23:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:56 Aux= 06:23:56 Message to Camera, serial 265314 queued 06:24:33 Received message from Master: op=PointingHead serial=265327 06:24:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:24:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:24:34 Point started: ret=0 06:24:34 point_skyscan result=0 06:24:34 Check angles 06:24:34 SkyScan query 06:24:35 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.1<-16540 Statuses=0009 0009 06:24:35 Msec=0 True Az=63.915 Ze=-68.1 Az status=0009 Ze status=0009 06:24:35 Check angles 06:24:35 SkyScan query 06:24:36 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.52<-17968 Statuses=0009 0009 06:24:36 Msec=750 True Az=81.585 Ze=-89.52 Az status=0009 Ze status=0009 06:24:36 Check angles 06:24:36 SkyScan query 06:24:36 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.46<-19364 Statuses=0009 0009 06:24:36 Msec=1500 True Az=99.18 Ze=-110.46 Az status=0009 Ze status=0009 06:24:37 Check angles 06:24:37 SkyScan query 06:24:37 SkyScan query done: ret=0 az=116.565<-7771 ze=-131.415<-20761 Statuses=0009 0009 06:24:37 Msec=2250 True Az=116.565 Ze=-131.415 Az status=0009 Ze status=0009 06:24:37 Check angles 06:24:37 SkyScan query 06:24:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 06:24:38 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 06:24:38 Check angles 06:24:38 SkyScan query 06:24:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 06:24:39 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 06:24:39 Message to Master queued w/err=0: serial=265327 error=0 06:24:44 Received message from Master: op=Filter serial=265328 06:24:44 Color wheel filter change from 0 to 0 06:24:44 FLIGetFilterPos err=0 currentPosition=0 06:24:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:44 Filter is already there-color wheel unchanged 06:24:44 Received message from Master: op=Shutter serial=265329 06:24:44 Shutter LASER close 06:24:44 Received message from Camera: op=State serial=265331 06:24:44 GetSingleValue result=40 Value=cccccccc 06:24:44 SkyScan query 06:24:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:24:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:44 Parameters OK 06:24:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:44 Set A/D data flow result=40 06:24:44 Set A/D channel type result=40 06:24:44 Set A/D encoding result=40 06:24:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:44 Set channel filter=0.000000e+000 result=40 06:24:44 Config A/D Result=40 06:24:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:44 Get A/D filter: -9.255963e+061 result=40 06:24:44 Get A/D value=-858993460 result=40 06:24:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:44 Parameters OK 06:24:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:44 Set A/D data flow result=40 06:24:44 Set A/D channel type result=40 06:24:44 Set A/D encoding result=40 06:24:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:44 Set channel filter=0.000000e+000 result=40 06:24:44 Config A/D Result=40 06:24:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:44 Get A/D filter: -9.255963e+061 result=40 06:24:44 Get A/D value=-858993460 result=40 06:24:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:44 Aux= 06:24:44 Message to Camera, serial 265331 queued 06:25:21 Received message from Master: op=PointingHead serial=265344 06:25:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:25:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:25:22 Point started: ret=0 06:25:22 point_skyscan result=0 06:25:23 Check angles 06:25:23 SkyScan query 06:25:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.42<-23428 Statuses=0009 0009 06:25:23 Msec=0 True Az=112.995 Ze=-171.42 Az status=0009 Ze status=0009 06:25:23 Check angles 06:25:23 SkyScan query 06:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:25:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:25:24 Message to Master queued w/err=0: serial=265344 error=0 06:25:29 Received message from Master: op=Filter serial=265345 06:25:29 Color wheel filter change from 0 to 0 06:25:29 FLIGetFilterPos err=0 currentPosition=0 06:25:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:29 Filter is already there-color wheel unchanged 06:25:29 Received message from Master: op=Shutter serial=265346 06:25:29 Shutter LASER open 06:25:29 Received message from Camera: op=State serial=265348 06:25:29 GetSingleValue result=40 Value=cccccccc 06:25:29 SkyScan query 06:25:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:25:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:30 Parameters OK 06:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:30 Set A/D data flow result=40 06:25:30 Set A/D channel type result=40 06:25:30 Set A/D encoding result=40 06:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:30 Set channel filter=0.000000e+000 result=40 06:25:30 Config A/D Result=40 06:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:30 Get A/D filter: -9.255963e+061 result=40 06:25:30 Get A/D value=-858993460 result=40 06:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:30 Parameters OK 06:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:30 Set A/D data flow result=40 06:25:30 Set A/D channel type result=40 06:25:30 Set A/D encoding result=40 06:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:30 Set channel filter=0.000000e+000 result=40 06:25:30 Config A/D Result=40 06:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:30 Get A/D filter: -9.255963e+061 result=40 06:25:30 Get A/D value=-858993460 result=40 06:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:30 Aux= 06:25:30 Message to Camera, serial 265348 queued 06:25:37 Received message from Master: op=Shutter serial=265357 06:25:37 Shutter LASER close 06:25:38 Received message from Master: op=PointingHead serial=265361 06:25:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:25:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:25:38 Point started: ret=0 06:25:38 point_skyscan result=0 06:25:39 Check angles 06:25:39 SkyScan query 06:25:40 SkyScan query done: ret=0 az=136.08<-9072 ze=-143.115<-21541 Statuses=0009 0009 06:25:40 Msec=0 True Az=136.08 Ze=-143.115 Az status=0009 Ze status=0009 06:25:40 Check angles 06:25:40 SkyScan query 06:25:40 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.695<-20113 Statuses=0009 0009 06:25:40 Msec=750 True Az=153.96 Ze=-121.695 Az status=0009 Ze status=0009 06:25:40 Check angles 06:25:40 SkyScan query 06:25:41 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.635<-18709 Statuses=0009 0009 06:25:41 Msec=1500 True Az=171.375 Ze=-100.635 Az status=0009 Ze status=0009 06:25:41 Check angles 06:25:41 SkyScan query 06:25:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.785<-17319 Statuses=0008 0009 06:25:42 Msec=2250 True Az=176.01 Ze=-79.785 Az status=0008 Ze status=0009 06:25:42 Check angles 06:25:42 SkyScan query 06:25:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.35<-15890 Statuses=0008 0009 06:25:43 Msec=3000 True Az=176.01 Ze=-58.35 Az status=0008 Ze status=0009 06:25:43 Check angles 06:25:43 SkyScan query 06:25:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:25:43 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:25:43 Message to Master queued w/err=0: serial=265361 error=0 06:25:48 Received message from Master: op=Filter serial=265362 06:25:48 Color wheel filter change from 0 to 0 06:25:48 FLIGetFilterPos err=0 currentPosition=0 06:25:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:48 Filter is already there-color wheel unchanged 06:25:48 Received message from Master: op=Shutter serial=265363 06:25:48 Shutter LASER close [UTC 2018-12-19 06:25:49] 06:25:49 Received message from Camera: op=State serial=265365 06:25:49 GetSingleValue result=40 Value=cccccccc 06:25:49 SkyScan query 06:25:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:25:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:49 Parameters OK 06:25:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:49 Set A/D data flow result=40 06:25:49 Set A/D channel type result=40 06:25:49 Set A/D encoding result=40 06:25:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:49 Set channel filter=0.000000e+000 result=40 06:25:49 Config A/D Result=40 06:25:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:49 Get A/D filter: -9.255963e+061 result=40 06:25:49 Get A/D value=-858993460 result=40 06:25:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:49 Parameters OK 06:25:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:49 Set A/D data flow result=40 06:25:49 Set A/D channel type result=40 06:25:49 Set A/D encoding result=40 06:25:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:49 Set channel filter=0.000000e+000 result=40 06:25:49 Config A/D Result=40 06:25:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:49 Get A/D filter: -9.255963e+061 result=40 06:25:49 Get A/D value=-858993460 result=40 06:25:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:49 Aux= 06:25:49 Message to Camera, serial 265365 queued 06:26:26 Received message from Master: op=PointingHead serial=265378 06:26:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:26:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:26:26 Point started: ret=0 06:26:26 point_skyscan result=0 06:26:27 Check angles 06:26:27 SkyScan query 06:26:28 SkyScan query done: ret=0 az=153.21<-10214 ze=-21.975<-13465 Statuses=0009 0009 06:26:28 Msec=0 True Az=153.21 Ze=-21.975 Az status=0009 Ze status=0009 06:26:28 Check angles 06:26:28 SkyScan query 06:26:28 SkyScan query done: ret=0 az=135.75<-9050 ze=-0.975<-12065 Statuses=0009 0009 06:26:28 Msec=750 True Az=135.75 Ze=-0.975 Az status=0009 Ze status=0009 06:26:29 Check angles 06:26:29 SkyScan query 06:26:29 SkyScan query done: ret=0 az=118.23<-7882 ze=19.95<-10670 Statuses=0009 0009 06:26:29 Msec=1500 True Az=118.23 Ze=19.95 Az status=0009 Ze status=0009 06:26:29 Check angles 06:26:29 SkyScan query 06:26:30 SkyScan query done: ret=0 az=100.485<-6699 ze=41.37<-9242 Statuses=0009 0009 06:26:30 Msec=2250 True Az=100.485 Ze=41.37 Az status=0009 Ze status=0009 06:26:30 Check angles 06:26:30 SkyScan query 06:26:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 06:26:31 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 06:26:31 Check angles 06:26:31 SkyScan query 06:26:31 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 06:26:31 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 06:26:31 Message to Master queued w/err=0: serial=265378 error=0 06:26:36 Received message from Master: op=Filter serial=265379 06:26:36 Color wheel filter change from 0 to 0 06:26:36 FLIGetFilterPos err=0 currentPosition=0 06:26:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:36 Filter is already there-color wheel unchanged 06:26:37 Received message from Master: op=Shutter serial=265380 06:26:37 Shutter LASER close 06:26:37 Received message from Camera: op=State serial=265382 06:26:37 GetSingleValue result=40 Value=cccccccc 06:26:37 SkyScan query 06:26:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:26:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:37 Parameters OK 06:26:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:37 Set A/D data flow result=40 06:26:37 Set A/D channel type result=40 06:26:37 Set A/D encoding result=40 06:26:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:37 Set channel filter=0.000000e+000 result=40 06:26:37 Config A/D Result=40 06:26:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:37 Get A/D filter: -9.255963e+061 result=40 06:26:37 Get A/D value=-858993460 result=40 06:26:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:37 Parameters OK 06:26:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:37 Set A/D data flow result=40 06:26:37 Set A/D channel type result=40 06:26:37 Set A/D encoding result=40 06:26:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:37 Set channel filter=0.000000e+000 result=40 06:26:37 Config A/D Result=40 06:26:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:37 Get A/D filter: -9.255963e+061 result=40 06:26:37 Get A/D value=-858993460 result=40 06:26:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:37 Aux= 06:26:37 Message to Camera, serial 265382 queued 06:27:14 Received message from Master: op=PointingHead serial=265395 06:27:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:27:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:27:15 Point started: ret=0 06:27:15 point_skyscan result=0 06:27:15 Check angles 06:27:15 SkyScan query 06:27:16 SkyScan query done: ret=0 az=85.98<-5732 ze=21.195<-10587 Statuses=0008 0009 06:27:16 Msec=0 True Az=85.98 Ze=21.195 Az status=0008 Ze status=0009 06:27:16 Check angles 06:27:16 SkyScan query 06:27:17 SkyScan query done: ret=0 az=85.995<-5733 ze=0.225<-11985 Statuses=0008 0009 06:27:17 Msec=750 True Az=85.995 Ze=0.225 Az status=0008 Ze status=0009 06:27:17 Check angles 06:27:17 SkyScan query 06:27:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.715<-13381 Statuses=0008 0009 06:27:17 Msec=1500 True Az=85.995 Ze=-20.715 Az status=0008 Ze status=0009 06:27:18 Check angles 06:27:18 SkyScan query 06:27:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.655<-14777 Statuses=0008 0009 06:27:18 Msec=2250 True Az=85.995 Ze=-41.655 Az status=0008 Ze status=0009 06:27:18 Check angles 06:27:18 SkyScan query 06:27:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:27:19 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:27:19 Message to Master queued w/err=0: serial=265395 error=0 06:27:24 Received message from Master: op=Filter serial=265396 06:27:24 Color wheel filter change from 0 to 0 06:27:24 FLIGetFilterPos err=0 currentPosition=0 06:27:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:24 Filter is already there-color wheel unchanged 06:27:24 Received message from Master: op=Shutter serial=265397 06:27:24 Shutter LASER close 06:27:24 Received message from Camera: op=State serial=265399 06:27:24 GetSingleValue result=40 Value=cccccccc 06:27:24 SkyScan query 06:27:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:27:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:25 Parameters OK 06:27:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:25 Set A/D data flow result=40 06:27:25 Set A/D channel type result=40 06:27:25 Set A/D encoding result=40 06:27:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:25 Set channel filter=0.000000e+000 result=40 06:27:25 Config A/D Result=40 06:27:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:25 Get A/D filter: -9.255963e+061 result=40 06:27:25 Get A/D value=-858993460 result=40 06:27:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:25 Parameters OK 06:27:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:25 Set A/D data flow result=40 06:27:25 Set A/D channel type result=40 06:27:25 Set A/D encoding result=40 06:27:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:25 Set channel filter=0.000000e+000 result=40 06:27:25 Config A/D Result=40 06:27:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:25 Get A/D filter: -9.255963e+061 result=40 06:27:25 Get A/D value=-858993460 result=40 06:27:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:25 Aux= 06:27:25 Message to Camera, serial 265399 queued 06:28:02 Received message from Master: op=PointingHead serial=265412 06:28:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:28:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:28:02 Point started: ret=0 06:28:02 point_skyscan result=0 06:28:03 Check angles 06:28:03 SkyScan query 06:28:03 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.57<-17438 Statuses=0009 0009 06:28:03 Msec=0 True Az=109.395 Ze=-81.57 Az status=0009 Ze status=0009 06:28:03 Check angles 06:28:03 SkyScan query 06:28:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 06:28:04 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 06:28:04 Check angles 06:28:04 SkyScan query 06:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 06:28:05 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 06:28:05 Check angles 06:28:05 SkyScan query 06:28:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.42<-21628 Statuses=0008 0009 06:28:06 Msec=2250 True Az=112.995 Ze=-144.42 Az status=0008 Ze status=0009 06:28:06 Check angles 06:28:06 SkyScan query 06:28:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 06:28:06 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 06:28:06 Check angles 06:28:06 SkyScan query 06:28:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:28:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:28:07 Message to Master queued w/err=0: serial=265412 error=0 06:28:12 Received message from Master: op=Filter serial=265413 06:28:12 Color wheel filter change from 0 to 0 06:28:12 FLIGetFilterPos err=0 currentPosition=0 06:28:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:12 Filter is already there-color wheel unchanged 06:28:12 Received message from Master: op=Shutter serial=265414 06:28:12 Shutter LASER open 06:28:12 Received message from Camera: op=State serial=265416 06:28:12 GetSingleValue result=40 Value=cccccccc 06:28:12 SkyScan query 06:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:28:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:13 Parameters OK 06:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:13 Set A/D data flow result=40 06:28:13 Set A/D channel type result=40 06:28:13 Set A/D encoding result=40 06:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:13 Set channel filter=0.000000e+000 result=40 06:28:13 Config A/D Result=40 06:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:13 Get A/D filter: -9.255963e+061 result=40 06:28:13 Get A/D value=-858993460 result=40 06:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:13 Parameters OK 06:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:13 Set A/D data flow result=40 06:28:13 Set A/D channel type result=40 06:28:13 Set A/D encoding result=40 06:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:13 Set channel filter=0.000000e+000 result=40 06:28:13 Config A/D Result=40 06:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:13 Get A/D filter: -9.255963e+061 result=40 06:28:13 Get A/D value=-858993460 result=40 06:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:13 Aux= 06:28:13 Message to Camera, serial 265416 queued 06:28:21 Received message from Master: op=Shutter serial=265426 06:28:21 Shutter LASER close 06:28:22 Received message from Master: op=PointingHead serial=265430 06:28:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:28:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:28:22 Point started: ret=0 06:28:22 point_skyscan result=0 06:28:23 Check angles 06:28:23 SkyScan query 06:28:23 SkyScan query done: ret=0 az=90.165<-6011 ze=157.47<-1502 Statuses=0009 0009 06:28:23 Msec=0 True Az=90.165 Ze=157.47 Az status=0009 Ze status=0009 06:28:24 Check angles 06:28:24 SkyScan query 06:28:24 SkyScan query done: ret=0 az=72.615<-4841 ze=136.485<-2901 Statuses=0009 0009 06:28:24 Msec=750 True Az=72.615 Ze=136.485 Az status=0009 Ze status=0009 06:28:24 Check angles 06:28:24 SkyScan query 06:28:25 SkyScan query done: ret=0 az=54.81<-3654 ze=115.14<-4324 Statuses=0009 0009 06:28:25 Msec=1500 True Az=54.81 Ze=115.14 Az status=0009 Ze status=0009 06:28:25 Check angles 06:28:25 SkyScan query 06:28:26 SkyScan query done: ret=0 az=40.995<-2733 ze=94.155<-5723 Statuses=0009 0009 06:28:26 Msec=2250 True Az=40.995 Ze=94.155 Az status=0009 Ze status=0009 06:28:26 Check angles 06:28:26 SkyScan query 06:28:26 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 06:28:26 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 06:28:27 Check angles 06:28:27 SkyScan query 06:28:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 06:28:27 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 06:28:27 Check angles 06:28:27 SkyScan query 06:28:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:28:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:28:28 Message to Master queued w/err=0: serial=265430 error=0 06:28:33 Received message from Master: op=Filter serial=265431 06:28:33 Color wheel filter change from 0 to 0 06:28:33 FLIGetFilterPos err=0 currentPosition=0 06:28:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:33 Filter is already there-color wheel unchanged 06:28:33 Received message from Master: op=Shutter serial=265432 06:28:33 Shutter LASER close 06:28:33 Received message from Camera: op=State serial=265434 06:28:33 GetSingleValue result=40 Value=cccccccc 06:28:33 SkyScan query 06:28:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:28:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:34 Parameters OK 06:28:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:34 Set A/D data flow result=40 06:28:34 Set A/D channel type result=40 06:28:34 Set A/D encoding result=40 06:28:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:34 Set channel filter=0.000000e+000 result=40 06:28:34 Config A/D Result=40 06:28:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:34 Get A/D filter: -9.255963e+061 result=40 06:28:34 Get A/D value=-858993460 result=40 06:28:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:34 Parameters OK 06:28:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:34 Set A/D data flow result=40 06:28:34 Set A/D channel type result=40 06:28:34 Set A/D encoding result=40 06:28:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:34 Set channel filter=0.000000e+000 result=40 06:28:34 Config A/D Result=40 06:28:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:34 Get A/D filter: -9.255963e+061 result=40 06:28:34 Get A/D value=-858993460 result=40 06:28:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:34 Aux= 06:28:34 Message to Camera, serial 265434 queued 06:29:11 Received message from Master: op=PointingHead serial=265447 06:29:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:29:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:29:11 Point started: ret=0 06:29:11 point_skyscan result=0 06:29:12 Check angles 06:29:12 SkyScan query 06:29:13 SkyScan query done: ret=0 az=40.995<-2733 ze=21.39<-10574 Statuses=0008 0009 06:29:13 Msec=0 True Az=40.995 Ze=21.39 Az status=0008 Ze status=0009 06:29:13 Check angles 06:29:13 SkyScan query 06:29:13 SkyScan query done: ret=0 az=41.01<-2734 ze=0.405<-11973 Statuses=0008 0009 06:29:13 Msec=750 True Az=41.01 Ze=0.405 Az status=0008 Ze status=0009 06:29:13 Check angles 06:29:13 SkyScan query 06:29:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.535<-13369 Statuses=0008 0009 06:29:14 Msec=1500 True Az=40.995 Ze=-20.535 Az status=0008 Ze status=0009 06:29:14 Check angles 06:29:14 SkyScan query 06:29:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 06:29:15 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 06:29:15 Check angles 06:29:15 SkyScan query 06:29:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 06:29:16 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 06:29:16 Message to Master queued w/err=0: serial=265447 error=0 06:29:21 Received message from Master: op=Filter serial=265448 06:29:21 Color wheel filter change from 0 to 0 06:29:21 FLIGetFilterPos err=0 currentPosition=0 06:29:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:21 Filter is already there-color wheel unchanged 06:29:21 Received message from Master: op=Shutter serial=265449 06:29:21 Shutter LASER close 06:29:21 Received message from Camera: op=State serial=265451 06:29:21 GetSingleValue result=40 Value=cccccccc 06:29:21 SkyScan query 06:29:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:29:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:21 Parameters OK 06:29:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:21 Set A/D data flow result=40 06:29:21 Set A/D channel type result=40 06:29:21 Set A/D encoding result=40 06:29:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:21 Set channel filter=0.000000e+000 result=40 06:29:21 Config A/D Result=40 06:29:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:21 Get A/D filter: -9.255963e+061 result=40 06:29:21 Get A/D value=-858993460 result=40 06:29:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:21 Parameters OK 06:29:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:21 Set A/D data flow result=40 06:29:21 Set A/D channel type result=40 06:29:21 Set A/D encoding result=40 06:29:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:21 Set channel filter=0.000000e+000 result=40 06:29:21 Config A/D Result=40 06:29:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:21 Get A/D filter: -9.255963e+061 result=40 06:29:21 Get A/D value=-858993460 result=40 06:29:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:21 Aux= 06:29:21 Message to Camera, serial 265451 queued 06:29:58 Received message from Master: op=PointingHead serial=265464 06:29:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:29:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:29:59 Point started: ret=0 06:29:59 point_skyscan result=0 06:29:59 Check angles 06:29:59 SkyScan query 06:30:00 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.655<-16577 Statuses=0009 0009 06:30:00 Msec=0 True Az=64.29 Ze=-68.655 Az status=0009 Ze status=0009 06:30:00 Check angles 06:30:00 SkyScan query 06:30:01 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.655<-17977 Statuses=0009 0009 06:30:01 Msec=750 True Az=81.78 Ze=-89.655 Az status=0009 Ze status=0009 06:30:01 Check angles 06:30:01 SkyScan query 06:30:01 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.61<-19374 Statuses=0009 0009 06:30:01 Msec=1500 True Az=99.36 Ze=-110.61 Az status=0009 Ze status=0009 06:30:02 Check angles 06:30:02 SkyScan query 06:30:02 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.94<-20796 Statuses=0009 0009 06:30:02 Msec=2250 True Az=117.06 Ze=-131.94 Az status=0009 Ze status=0009 06:30:02 Check angles 06:30:02 SkyScan query 06:30:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 06:30:03 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 06:30:03 Check angles 06:30:03 SkyScan query 06:30:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 06:30:04 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 06:30:04 Message to Master queued w/err=0: serial=265464 error=0 06:30:09 Received message from Master: op=Filter serial=265465 06:30:09 Color wheel filter change from 0 to 0 06:30:09 FLIGetFilterPos err=0 currentPosition=0 06:30:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:09 Filter is already there-color wheel unchanged 06:30:09 Received message from Master: op=Shutter serial=265466 06:30:09 Shutter LASER close 06:30:09 Received message from Camera: op=State serial=265468 06:30:09 GetSingleValue result=40 Value=cccccccc 06:30:09 SkyScan query 06:30:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:30:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:10 Parameters OK 06:30:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:10 Set A/D data flow result=40 06:30:10 Set A/D channel type result=40 06:30:10 Set A/D encoding result=40 06:30:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:10 Set channel filter=0.000000e+000 result=40 06:30:10 Config A/D Result=40 06:30:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:10 Get A/D filter: -9.255963e+061 result=40 06:30:10 Get A/D value=-858993460 result=40 06:30:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:10 Parameters OK 06:30:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:10 Set A/D data flow result=40 06:30:10 Set A/D channel type result=40 06:30:10 Set A/D encoding result=40 06:30:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:10 Set channel filter=0.000000e+000 result=40 06:30:10 Config A/D Result=40 06:30:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:10 Get A/D filter: -9.255963e+061 result=40 06:30:10 Get A/D value=-858993460 result=40 06:30:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:10 Aux= 06:30:10 Message to Camera, serial 265468 queued 06:30:46 Received message from Master: op=PointingHead serial=265481 06:30:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:30:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:30:47 Point started: ret=0 06:30:47 point_skyscan result=0 06:30:47 Check angles 06:30:47 SkyScan query 06:30:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0009 0009 06:30:48 Msec=0 True Az=112.995 Ze=-170.97 Az status=0009 Ze status=0009 06:30:48 Check angles 06:30:48 SkyScan query 06:30:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:30:49 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:30:49 Message to Master queued w/err=0: serial=265481 error=0 06:30:54 Received message from Master: op=Filter serial=265482 06:30:54 Color wheel filter change from 0 to 0 06:30:54 FLIGetFilterPos err=0 currentPosition=0 06:30:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:54 Filter is already there-color wheel unchanged 06:30:54 Received message from Master: op=Shutter serial=265483 06:30:54 Shutter LASER open 06:30:54 Received message from Camera: op=State serial=265485 06:30:54 GetSingleValue result=40 Value=cccccccc 06:30:54 SkyScan query 06:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:30:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:55 Parameters OK 06:30:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:55 Set A/D data flow result=40 06:30:55 Set A/D channel type result=40 06:30:55 Set A/D encoding result=40 06:30:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:55 Set channel filter=0.000000e+000 result=40 06:30:55 Config A/D Result=40 06:30:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:55 Get A/D filter: -9.255963e+061 result=40 06:30:55 Get A/D value=-858993460 result=40 06:30:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:55 Parameters OK 06:30:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:55 Set A/D data flow result=40 06:30:55 Set A/D channel type result=40 06:30:55 Set A/D encoding result=40 06:30:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:55 Set channel filter=0.000000e+000 result=40 06:30:55 Config A/D Result=40 06:30:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:55 Get A/D filter: -9.255963e+061 result=40 06:30:55 Get A/D value=-858993460 result=40 06:30:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:55 Aux= 06:30:55 Message to Camera, serial 265485 queued 06:31:03 Received message from Master: op=Shutter serial=265495 06:31:03 Shutter LASER close 06:31:04 Received message from Master: op=PointingHead serial=265499 06:31:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:31:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:31:04 Point started: ret=0 06:31:04 point_skyscan result=0 06:31:05 Check angles 06:31:05 SkyScan query 06:31:05 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.875<-21525 Statuses=0009 0009 06:31:05 Msec=0 True Az=136.305 Ze=-142.875 Az status=0009 Ze status=0009 06:31:06 Check angles 06:31:06 SkyScan query 06:31:06 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.905<-20127 Statuses=0009 0009 06:31:06 Msec=750 True Az=153.765 Ze=-121.905 Az status=0009 Ze status=0009 06:31:06 Check angles 06:31:06 SkyScan query 06:31:07 SkyScan query done: ret=0 az=171.66<-11444 ze=-100.44<-18696 Statuses=0009 0009 06:31:07 Msec=1500 True Az=171.66 Ze=-100.44 Az status=0009 Ze status=0009 06:31:07 Check angles 06:31:07 SkyScan query 06:31:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.545<-17303 Statuses=0008 0009 06:31:08 Msec=2250 True Az=176.01 Ze=-79.545 Az status=0008 Ze status=0009 06:31:08 Check angles 06:31:08 SkyScan query 06:31:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.56<-15904 Statuses=0008 0009 06:31:08 Msec=3000 True Az=176.01 Ze=-58.56 Az status=0008 Ze status=0009 06:31:09 Check angles 06:31:09 SkyScan query 06:31:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:31:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:31:09 Message to Master queued w/err=0: serial=265499 error=0 06:31:14 Received message from Master: op=Filter serial=265500 06:31:14 Color wheel filter change from 0 to 0 06:31:14 FLIGetFilterPos err=0 currentPosition=0 06:31:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:14 Filter is already there-color wheel unchanged 06:31:14 Received message from Master: op=Shutter serial=265501 06:31:14 Shutter LASER close 06:31:15 Received message from Camera: op=State serial=265503 06:31:15 GetSingleValue result=40 Value=cccccccc 06:31:15 SkyScan query 06:31:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:31:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:15 Parameters OK 06:31:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:15 Set A/D data flow result=40 06:31:15 Set A/D channel type result=40 06:31:15 Set A/D encoding result=40 06:31:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:15 Set channel filter=0.000000e+000 result=40 06:31:15 Config A/D Result=40 06:31:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:15 Get A/D filter: -9.255963e+061 result=40 06:31:15 Get A/D value=-858993460 result=40 06:31:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:15 Parameters OK 06:31:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:15 Set A/D data flow result=40 06:31:15 Set A/D channel type result=40 06:31:15 Set A/D encoding result=40 06:31:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:15 Set channel filter=0.000000e+000 result=40 06:31:15 Config A/D Result=40 06:31:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:15 Get A/D filter: -9.255963e+061 result=40 06:31:15 Get A/D value=-858993460 result=40 06:31:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:15 Aux= 06:31:15 Message to Camera, serial 265503 queued 06:31:52 Received message from Master: op=PointingHead serial=265516 06:31:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:31:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:31:52 Point started: ret=0 06:31:52 point_skyscan result=0 06:31:53 Check angles 06:31:53 SkyScan query 06:31:54 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.255<-13417 Statuses=0009 0009 06:31:54 Msec=0 True Az=152.67 Ze=-21.255 Az status=0009 Ze status=0009 06:31:54 Check angles 06:31:54 SkyScan query 06:31:54 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.315<-12021 Statuses=0009 0009 06:31:54 Msec=750 True Az=135.09 Ze=-0.315 Az status=0009 Ze status=0009 06:31:55 Check angles 06:31:55 SkyScan query 06:31:55 SkyScan query done: ret=0 az=117.645<-7843 ze=20.64<-10624 Statuses=0009 0009 06:31:55 Msec=1500 True Az=117.645 Ze=20.64 Az status=0009 Ze status=0009 06:31:55 Check angles 06:31:55 SkyScan query 06:31:56 SkyScan query done: ret=0 az=100.29<-6686 ze=41.58<-9228 Statuses=0009 0009 06:31:56 Msec=2250 True Az=100.29 Ze=41.58 Az status=0009 Ze status=0009 06:31:56 Check angles 06:31:56 SkyScan query 06:31:57 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:31:57 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:31:57 Check angles 06:31:57 SkyScan query 06:31:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:31:57 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:31:57 Message to Master queued w/err=0: serial=265516 error=0 06:32:02 Received message from Master: op=Filter serial=265517 06:32:02 Color wheel filter change from 0 to 0 06:32:02 FLIGetFilterPos err=0 currentPosition=0 06:32:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:02 Filter is already there-color wheel unchanged 06:32:03 Received message from Master: op=Shutter serial=265518 06:32:03 Shutter LASER close 06:32:03 Received message from Camera: op=State serial=265520 06:32:03 GetSingleValue result=40 Value=cccccccc 06:32:03 SkyScan query 06:32:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 06:32:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:03 Parameters OK 06:32:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:03 Set A/D data flow result=40 06:32:03 Set A/D channel type result=40 06:32:03 Set A/D encoding result=40 06:32:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:03 Set channel filter=0.000000e+000 result=40 06:32:03 Config A/D Result=40 06:32:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:03 Get A/D filter: -9.255963e+061 result=40 06:32:03 Get A/D value=-858993460 result=40 06:32:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:03 Parameters OK 06:32:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:03 Set A/D data flow result=40 06:32:03 Set A/D channel type result=40 06:32:03 Set A/D encoding result=40 06:32:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:03 Set channel filter=0.000000e+000 result=40 06:32:03 Config A/D Result=40 06:32:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:03 Get A/D filter: -9.255963e+061 result=40 06:32:03 Get A/D value=-858993460 result=40 06:32:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:03 Aux= 06:32:03 Message to Camera, serial 265520 queued 06:32:40 Received message from Master: op=PointingHead serial=265533 06:32:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:32:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:32:40 Point started: ret=0 06:32:40 point_skyscan result=0 06:32:41 Check angles 06:32:41 SkyScan query 06:32:42 SkyScan query done: ret=0 az=85.995<-5733 ze=21.195<-10587 Statuses=0008 0009 06:32:42 Msec=0 True Az=85.995 Ze=21.195 Az status=0008 Ze status=0009 06:32:42 Check angles 06:32:42 SkyScan query 06:32:43 SkyScan query done: ret=0 az=86.01<-5734 ze=0.24<-11984 Statuses=0008 0009 06:32:43 Msec=750 True Az=86.01 Ze=0.24 Az status=0008 Ze status=0009 06:32:43 Check angles 06:32:43 SkyScan query 06:32:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.715<-13381 Statuses=0008 0009 06:32:43 Msec=1500 True Az=85.995 Ze=-20.715 Az status=0008 Ze status=0009 06:32:44 Check angles 06:32:44 SkyScan query 06:32:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.12<-14808 Statuses=0008 0009 06:32:44 Msec=2250 True Az=85.995 Ze=-42.12 Az status=0008 Ze status=0009 06:32:44 Check angles 06:32:44 SkyScan query 06:32:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:32:45 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:32:45 Message to Master queued w/err=0: serial=265533 error=0 06:32:50 Received message from Master: op=Filter serial=265534 06:32:50 Color wheel filter change from 0 to 0 06:32:50 FLIGetFilterPos err=0 currentPosition=0 06:32:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:50 Filter is already there-color wheel unchanged 06:32:50 Received message from Master: op=Shutter serial=265535 06:32:50 Shutter LASER close 06:32:50 Received message from Camera: op=State serial=265537 06:32:50 GetSingleValue result=40 Value=cccccccc 06:32:50 SkyScan query 06:32:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:32:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:51 Parameters OK 06:32:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:51 Set A/D data flow result=40 06:32:51 Set A/D channel type result=40 06:32:51 Set A/D encoding result=40 06:32:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:51 Set channel filter=0.000000e+000 result=40 06:32:51 Config A/D Result=40 06:32:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:51 Get A/D filter: -9.255963e+061 result=40 06:32:51 Get A/D value=-858993460 result=40 06:32:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:51 Parameters OK 06:32:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:51 Set A/D data flow result=40 06:32:51 Set A/D channel type result=40 06:32:51 Set A/D encoding result=40 06:32:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:51 Set channel filter=0.000000e+000 result=40 06:32:51 Config A/D Result=40 06:32:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:51 Get A/D filter: -9.255963e+061 result=40 06:32:51 Get A/D value=-858993460 result=40 06:32:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:51 Aux= 06:32:51 Message to Camera, serial 265537 queued 06:33:27 Received message from Master: op=PointingHead serial=265550 06:33:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:33:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:33:28 Point started: ret=0 06:33:28 point_skyscan result=0 06:33:29 Check angles 06:33:29 SkyScan query 06:33:29 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.12<-17408 Statuses=0009 0009 06:33:29 Msec=0 True Az=108.87 Ze=-81.12 Az status=0009 Ze status=0009 06:33:29 Check angles 06:33:29 SkyScan query 06:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 06:33:30 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 06:33:30 Check angles 06:33:30 SkyScan query 06:33:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.09<-20206 Statuses=0008 0009 06:33:31 Msec=1500 True Az=112.995 Ze=-123.09 Az status=0008 Ze status=0009 06:33:31 Check angles 06:33:31 SkyScan query 06:33:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.045<-21603 Statuses=0008 0009 06:33:31 Msec=2250 True Az=112.995 Ze=-144.045 Az status=0008 Ze status=0009 06:33:32 Check angles 06:33:32 SkyScan query 06:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.985<-22999 Statuses=0008 0009 06:33:32 Msec=3000 True Az=112.995 Ze=-164.985 Az status=0008 Ze status=0009 06:33:32 Check angles 06:33:32 SkyScan query 06:33:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 06:33:33 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 06:33:33 Message to Master queued w/err=0: serial=265550 error=0 06:33:38 Received message from Master: op=Filter serial=265551 06:33:38 Color wheel filter change from 0 to 0 06:33:38 FLIGetFilterPos err=0 currentPosition=0 06:33:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:38 Filter is already there-color wheel unchanged 06:33:38 Received message from Master: op=Shutter serial=265552 06:33:38 Shutter LASER open 06:33:38 Received message from Camera: op=State serial=265554 06:33:38 GetSingleValue result=40 Value=cccccccc 06:33:38 SkyScan query 06:33:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:33:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:39 Parameters OK 06:33:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:39 Set A/D data flow result=40 06:33:39 Set A/D channel type result=40 06:33:39 Set A/D encoding result=40 06:33:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:39 Set channel filter=0.000000e+000 result=40 06:33:39 Config A/D Result=40 06:33:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:39 Get A/D filter: -9.255963e+061 result=40 06:33:39 Get A/D value=-858993460 result=40 06:33:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:39 Parameters OK 06:33:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:39 Set A/D data flow result=40 06:33:39 Set A/D channel type result=40 06:33:39 Set A/D encoding result=40 06:33:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:39 Set channel filter=0.000000e+000 result=40 06:33:39 Config A/D Result=40 06:33:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:39 Get A/D filter: -9.255963e+061 result=40 06:33:39 Get A/D value=-858993460 result=40 06:33:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:39 Aux= 06:33:39 Message to Camera, serial 265554 queued 06:33:46 Received message from Master: op=Shutter serial=265563 06:33:46 Shutter LASER close 06:33:47 Received message from Master: op=PointingHead serial=265567 06:33:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:33:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:33:47 Point started: ret=0 06:33:47 point_skyscan result=0 06:33:48 Check angles 06:33:48 SkyScan query 06:33:48 SkyScan query done: ret=0 az=90.165<-6011 ze=157.47<-1502 Statuses=0009 0009 06:33:48 Msec=0 True Az=90.165 Ze=157.47 Az status=0009 Ze status=0009 06:33:49 Check angles 06:33:49 SkyScan query 06:33:49 SkyScan query done: ret=0 az=72.3<-4820 ze=136.125<-2925 Statuses=0009 0009 06:33:49 Msec=750 True Az=72.3 Ze=136.125 Az status=0009 Ze status=0009 06:33:49 Check angles 06:33:49 SkyScan query 06:33:50 SkyScan query done: ret=0 az=54.795<-3653 ze=115.155<-4323 Statuses=0009 0009 06:33:50 Msec=1500 True Az=54.795 Ze=115.155 Az status=0009 Ze status=0009 06:33:50 Check angles 06:33:50 SkyScan query 06:33:51 SkyScan query done: ret=0 az=40.98<-2732 ze=93.765<-5749 Statuses=0009 0009 06:33:51 Msec=2250 True Az=40.98 Ze=93.765 Az status=0009 Ze status=0009 06:33:51 Check angles 06:33:51 SkyScan query 06:33:51 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 06:33:51 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 06:33:52 Check angles 06:33:52 SkyScan query 06:33:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 06:33:52 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 06:33:52 Check angles 06:33:52 SkyScan query 06:33:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:33:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:33:53 Message to Master queued w/err=0: serial=265567 error=0 06:33:58 Received message from Master: op=Filter serial=265568 06:33:58 Color wheel filter change from 0 to 0 06:33:58 FLIGetFilterPos err=0 currentPosition=0 06:33:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:58 Filter is already there-color wheel unchanged 06:33:58 Received message from Master: op=Shutter serial=265569 06:33:58 Shutter LASER close 06:33:58 Received message from Camera: op=State serial=265571 06:33:58 GetSingleValue result=40 Value=cccccccc 06:33:58 SkyScan query 06:33:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:33:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:59 Parameters OK 06:33:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:59 Set A/D data flow result=40 06:33:59 Set A/D channel type result=40 06:33:59 Set A/D encoding result=40 06:33:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:59 Set channel filter=0.000000e+000 result=40 06:33:59 Config A/D Result=40 06:33:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:59 Get A/D filter: -9.255963e+061 result=40 06:33:59 Get A/D value=-858993460 result=40 06:33:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:59 Parameters OK 06:33:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:59 Set A/D data flow result=40 06:33:59 Set A/D channel type result=40 06:33:59 Set A/D encoding result=40 06:33:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:59 Set channel filter=0.000000e+000 result=40 06:33:59 Config A/D Result=40 06:33:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:59 Get A/D filter: -9.255963e+061 result=40 06:33:59 Get A/D value=-858993460 result=40 06:33:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:59 Aux= 06:33:59 Message to Camera, serial 265571 queued 06:34:36 Received message from Master: op=PointingHead serial=265584 06:34:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:34:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:34:36 Point started: ret=0 06:34:36 point_skyscan result=0 06:34:37 Check angles 06:34:37 SkyScan query 06:34:38 SkyScan query done: ret=0 az=63.93<-4262 ze=81.36<-6576 Statuses=0009 0009 06:34:38 Msec=0 True Az=63.93 Ze=81.36 Az status=0009 Ze status=0009 06:34:38 Check angles 06:34:38 SkyScan query 06:34:38 SkyScan query done: ret=0 az=81.435<-5429 ze=102.3<-5180 Statuses=0009 0009 06:34:38 Msec=750 True Az=81.435 Ze=102.3 Az status=0009 Ze status=0009 06:34:39 Check angles 06:34:39 SkyScan query 06:34:39 SkyScan query done: ret=0 az=98.865<-6591 ze=123.225<-3785 Statuses=0009 0009 06:34:39 Msec=1500 True Az=98.865 Ze=123.225 Az status=0009 Ze status=0009 06:34:39 Check angles 06:34:39 SkyScan query 06:34:40 SkyScan query done: ret=0 az=116.265<-7751 ze=144.195<-2387 Statuses=0009 0009 06:34:40 Msec=2250 True Az=116.265 Ze=144.195 Az status=0009 Ze status=0009 06:34:40 Check angles 06:34:40 SkyScan query 06:34:41 SkyScan query done: ret=0 az=131.01<-8734 ze=165.57<-962 Statuses=0009 0009 06:34:41 Msec=3000 True Az=131.01 Ze=165.57 Az status=0009 Ze status=0009 06:34:41 Check angles 06:34:41 SkyScan query 06:34:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.445<-23563 Statuses=0008 0009 06:34:41 Msec=3750 True Az=130.995 Ze=-173.445 Az status=0008 Ze status=0009 06:34:42 Check angles 06:34:42 SkyScan query 06:34:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.505<-22167 Statuses=0008 0009 06:34:42 Msec=4500 True Az=130.995 Ze=-152.505 Az status=0008 Ze status=0009 06:34:42 Check angles 06:34:42 SkyScan query 06:34:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:34:43 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:34:43 Message to Master queued w/err=0: serial=265584 error=0 06:34:48 Received message from Master: op=Filter serial=265585 06:34:48 Color wheel filter change from 0 to 0 06:34:48 FLIGetFilterPos err=0 currentPosition=0 06:34:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:48 Filter is already there-color wheel unchanged 06:34:48 Received message from Master: op=Shutter serial=265586 06:34:48 Shutter LASER close 06:34:48 Received message from Camera: op=State serial=265588 06:34:48 GetSingleValue result=40 Value=cccccccc 06:34:48 SkyScan query 06:34:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:34:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:49 Parameters OK 06:34:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:49 Set A/D data flow result=40 06:34:49 Set A/D channel type result=40 06:34:49 Set A/D encoding result=40 06:34:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:49 Set channel filter=0.000000e+000 result=40 06:34:49 Config A/D Result=40 06:34:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:49 Get A/D filter: -9.255963e+061 result=40 06:34:49 Get A/D value=-858993460 result=40 06:34:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:49 Parameters OK 06:34:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:49 Set A/D data flow result=40 06:34:49 Set A/D channel type result=40 06:34:49 Set A/D encoding result=40 06:34:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:49 Set channel filter=0.000000e+000 result=40 06:34:49 Config A/D Result=40 06:34:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:49 Get A/D filter: -9.255963e+061 result=40 06:34:49 Get A/D value=-858993460 result=40 06:34:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:49 Aux= 06:34:49 Message to Camera, serial 265588 queued 06:35:26 Received message from Master: op=PointingHead serial=265601 06:35:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:35:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:35:26 Point started: ret=0 06:35:26 point_skyscan result=0 06:35:27 Check angles 06:35:27 SkyScan query 06:35:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 06:35:27 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 06:35:27 Check angles 06:35:27 SkyScan query 06:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:35:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:35:28 Message to Master queued w/err=0: serial=265601 error=0 06:35:33 Received message from Master: op=Filter serial=265602 06:35:33 Color wheel filter change from 0 to 0 06:35:33 FLIGetFilterPos err=0 currentPosition=0 06:35:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:33 Filter is already there-color wheel unchanged 06:35:33 Received message from Master: op=Shutter serial=265603 06:35:33 Shutter LASER open 06:35:33 Received message from Camera: op=State serial=265605 06:35:33 GetSingleValue result=40 Value=cccccccc 06:35:33 SkyScan query 06:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:35:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:34 Parameters OK 06:35:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:34 Set A/D data flow result=40 06:35:34 Set A/D channel type result=40 06:35:34 Set A/D encoding result=40 06:35:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:34 Set channel filter=0.000000e+000 result=40 06:35:34 Config A/D Result=40 06:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:34 Get A/D filter: -9.255963e+061 result=40 06:35:34 Get A/D value=-858993460 result=40 06:35:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:34 Parameters OK 06:35:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:34 Set A/D data flow result=40 06:35:34 Set A/D channel type result=40 06:35:34 Set A/D encoding result=40 06:35:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:34 Set channel filter=0.000000e+000 result=40 06:35:34 Config A/D Result=40 06:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-19 06:35:34] 06:35:34 Get A/D filter: -9.255963e+061 result=40 06:35:34 Get A/D value=-858993460 result=40 06:35:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:34 Aux= 06:35:34 Message to Camera, serial 265605 queued 06:35:42 Received message from Master: op=Shutter serial=265615 06:35:42 Shutter LASER close 06:35:43 Received message from Master: op=PointingHead serial=265619 06:35:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:35:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:35:43 Point started: ret=0 06:35:43 point_skyscan result=0 06:35:44 Check angles 06:35:44 SkyScan query 06:35:45 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.415<-21561 Statuses=0009 0009 06:35:45 Msec=0 True Az=135.825 Ze=-143.415 Az status=0009 Ze status=0009 06:35:45 Check angles 06:35:45 SkyScan query 06:35:45 SkyScan query done: ret=0 az=153.285<-10219 ze=-122.43<-20162 Statuses=0009 0009 06:35:45 Msec=750 True Az=153.285 Ze=-122.43 Az status=0009 Ze status=0009 06:35:46 Check angles 06:35:46 SkyScan query 06:35:46 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.55<-18770 Statuses=0009 0009 06:35:46 Msec=1500 True Az=170.775 Ze=-101.55 Az status=0009 Ze status=0009 06:35:46 Check angles 06:35:46 SkyScan query 06:35:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.55<-17370 Statuses=0008 0009 06:35:47 Msec=2250 True Az=175.995 Ze=-80.55 Az status=0008 Ze status=0009 06:35:47 Check angles 06:35:47 SkyScan query 06:35:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.595<-15973 Statuses=0008 0009 06:35:48 Msec=3000 True Az=175.995 Ze=-59.595 Az status=0008 Ze status=0009 06:35:48 Check angles 06:35:48 SkyScan query 06:35:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:35:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:35:48 Message to Master queued w/err=0: serial=265619 error=0 [UTC 2018-12-19 06:35:52] 06:35:53 Received message from Master: op=Filter serial=265620 06:35:53 Color wheel filter change from 0 to 0 06:35:53 FLIGetFilterPos err=0 currentPosition=0 06:35:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:53 Filter is already there-color wheel unchanged 06:35:54 Received message from Master: op=Shutter serial=265621 06:35:54 Shutter LASER close 06:35:54 Received message from Camera: op=State serial=265623 06:35:54 GetSingleValue result=40 Value=cccccccc 06:35:54 SkyScan query 06:35:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:35:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:54 Parameters OK 06:35:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:54 Set A/D data flow result=40 06:35:54 Set A/D channel type result=40 06:35:54 Set A/D encoding result=40 06:35:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:54 Set channel filter=0.000000e+000 result=40 06:35:54 Config A/D Result=40 06:35:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:54 Get A/D filter: -9.255963e+061 result=40 06:35:54 Get A/D value=-858993460 result=40 06:35:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:54 Parameters OK 06:35:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:54 Set A/D data flow result=40 06:35:54 Set A/D channel type result=40 06:35:54 Set A/D encoding result=40 06:35:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:54 Set channel filter=0.000000e+000 result=40 06:35:54 Config A/D Result=40 06:35:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:54 Get A/D filter: -9.255963e+061 result=40 06:35:54 Get A/D value=-858993460 result=40 06:35:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:54 Aux= 06:35:54 Message to Camera, serial 265623 queued 06:36:31 Received message from Master: op=PointingHead serial=265636 06:36:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:36:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:36:31 Point started: ret=0 06:36:31 point_skyscan result=0 06:36:32 Check angles 06:36:32 SkyScan query 06:36:33 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.345<-13423 Statuses=0009 0009 06:36:33 Msec=0 True Az=152.76 Ze=-21.345 Az status=0009 Ze status=0009 06:36:33 Check angles 06:36:33 SkyScan query 06:36:34 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.42<-12028 Statuses=0009 0009 06:36:34 Msec=750 True Az=135.27 Ze=-0.42 Az status=0009 Ze status=0009 06:36:34 Check angles 06:36:34 SkyScan query 06:36:34 SkyScan query done: ret=0 az=117.66<-7844 ze=20.565<-10629 Statuses=0009 0009 06:36:34 Msec=1500 True Az=117.66 Ze=20.565 Az status=0009 Ze status=0009 06:36:34 Check angles 06:36:34 SkyScan query 06:36:35 SkyScan query done: ret=0 az=100.005<-6667 ze=41.925<-9205 Statuses=0009 0009 06:36:35 Msec=2250 True Az=100.005 Ze=41.925 Az status=0009 Ze status=0009 06:36:35 Check angles 06:36:35 SkyScan query 06:36:36 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 06:36:36 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 06:36:36 Check angles 06:36:36 SkyScan query 06:36:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:36:37 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:36:37 Message to Master queued w/err=0: serial=265636 error=0 06:36:42 Received message from Master: op=Filter serial=265637 06:36:42 Color wheel filter change from 0 to 0 06:36:42 FLIGetFilterPos err=0 currentPosition=0 06:36:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:42 Filter is already there-color wheel unchanged 06:36:42 Received message from Master: op=Shutter serial=265638 06:36:42 Shutter LASER close 06:36:42 Received message from Camera: op=State serial=265640 06:36:42 GetSingleValue result=40 Value=cccccccc 06:36:42 SkyScan query 06:36:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:36:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:42 Parameters OK 06:36:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:42 Set A/D data flow result=40 06:36:42 Set A/D channel type result=40 06:36:42 Set A/D encoding result=40 06:36:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:42 Set channel filter=0.000000e+000 result=40 06:36:42 Config A/D Result=40 06:36:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:42 Get A/D filter: -9.255963e+061 result=40 06:36:42 Get A/D value=-858993460 result=40 06:36:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:42 Parameters OK 06:36:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:42 Set A/D data flow result=40 06:36:42 Set A/D channel type result=40 06:36:42 Set A/D encoding result=40 06:36:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:42 Set channel filter=0.000000e+000 result=40 06:36:42 Config A/D Result=40 06:36:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:42 Get A/D filter: -9.255963e+061 result=40 06:36:42 Get A/D value=-858993460 result=40 06:36:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:42 Aux= 06:36:42 Message to Camera, serial 265640 queued 06:37:19 Received message from Master: op=PointingHead serial=265653 06:37:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:37:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:37:20 Point started: ret=0 06:37:20 point_skyscan result=0 06:37:20 Check angles 06:37:20 SkyScan query 06:37:21 SkyScan query done: ret=0 az=85.995<-5733 ze=21.075<-10595 Statuses=0008 0009 06:37:21 Msec=0 True Az=85.995 Ze=21.075 Az status=0008 Ze status=0009 06:37:21 Check angles 06:37:21 SkyScan query 06:37:22 SkyScan query done: ret=0 az=86.01<-5734 ze=0.21<-11986 Statuses=0008 0009 06:37:22 Msec=750 True Az=86.01 Ze=0.21 Az status=0008 Ze status=0009 06:37:22 Check angles 06:37:22 SkyScan query 06:37:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.76<-13384 Statuses=0008 0009 06:37:23 Msec=1500 True Az=85.995 Ze=-20.76 Az status=0008 Ze status=0009 06:37:23 Check angles 06:37:23 SkyScan query 06:37:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.7<-14780 Statuses=0008 0009 06:37:23 Msec=2250 True Az=85.995 Ze=-41.7 Az status=0008 Ze status=0009 06:37:23 Check angles 06:37:23 SkyScan query 06:37:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:37:24 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:37:24 Message to Master queued w/err=0: serial=265653 error=0 06:37:29 Received message from Master: op=Filter serial=265654 06:37:29 Color wheel filter change from 0 to 0 06:37:29 FLIGetFilterPos err=0 currentPosition=0 06:37:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:29 Filter is already there-color wheel unchanged 06:37:29 Received message from Master: op=Shutter serial=265655 06:37:29 Shutter LASER close 06:37:29 Received message from Camera: op=State serial=265657 06:37:29 GetSingleValue result=40 Value=cccccccc 06:37:29 SkyScan query 06:37:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:37:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:30 Parameters OK 06:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:30 Set A/D data flow result=40 06:37:30 Set A/D channel type result=40 06:37:30 Set A/D encoding result=40 06:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:30 Set channel filter=0.000000e+000 result=40 06:37:30 Config A/D Result=40 06:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:30 Get A/D filter: -9.255963e+061 result=40 06:37:30 Get A/D value=-858993460 result=40 06:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:30 Parameters OK 06:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:30 Set A/D data flow result=40 06:37:30 Set A/D channel type result=40 06:37:30 Set A/D encoding result=40 06:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:30 Set channel filter=0.000000e+000 result=40 06:37:30 Config A/D Result=40 06:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:30 Get A/D filter: -9.255963e+061 result=40 06:37:30 Get A/D value=-858993460 result=40 06:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:30 Aux= 06:37:30 Message to Camera, serial 265657 queued 06:38:06 Received message from Master: op=PointingHead serial=265669 06:38:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:38:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:38:06 Point started: ret=0 06:38:06 point_skyscan result=0 06:38:07 Check angles 06:38:07 SkyScan query 06:38:07 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.48<-17432 Statuses=0009 0009 06:38:07 Msec=0 True Az=109.17 Ze=-81.48 Az status=0009 Ze status=0009 06:38:08 Check angles 06:38:08 SkyScan query 06:38:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.855<-18857 Statuses=0008 0009 06:38:08 Msec=750 True Az=112.995 Ze=-102.855 Az status=0008 Ze status=0009 06:38:08 Check angles 06:38:08 SkyScan query 06:38:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.825<-20255 Statuses=0008 0009 06:38:09 Msec=1500 True Az=112.995 Ze=-123.825 Az status=0008 Ze status=0009 06:38:09 Check angles 06:38:09 SkyScan query 06:38:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.2<-21680 Statuses=0008 0009 06:38:10 Msec=2250 True Az=112.995 Ze=-145.2 Az status=0008 Ze status=0009 06:38:10 Check angles 06:38:10 SkyScan query 06:38:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.605<-23107 Statuses=0008 0009 06:38:10 Msec=3000 True Az=112.995 Ze=-166.605 Az status=0008 Ze status=0009 06:38:11 Check angles 06:38:11 SkyScan query 06:38:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:38:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:38:11 Message to Master queued w/err=0: serial=265669 error=0 06:38:16 Received message from Master: op=Filter serial=265670 06:38:16 Color wheel filter change from 0 to 0 06:38:16 FLIGetFilterPos err=0 currentPosition=0 06:38:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:16 Filter is already there-color wheel unchanged 06:38:16 Received message from Master: op=Shutter serial=265671 06:38:16 Shutter LASER open 06:38:17 Received message from Camera: op=State serial=265673 06:38:17 GetSingleValue result=40 Value=cccccccc 06:38:17 SkyScan query 06:38:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:38:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:17 Parameters OK 06:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:17 Set A/D data flow result=40 06:38:17 Set A/D channel type result=40 06:38:17 Set A/D encoding result=40 06:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:17 Set channel filter=0.000000e+000 result=40 06:38:17 Config A/D Result=40 06:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:17 Get A/D filter: -9.255963e+061 result=40 06:38:17 Get A/D value=-858993460 result=40 06:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:17 Parameters OK 06:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:17 Set A/D data flow result=40 06:38:17 Set A/D channel type result=40 06:38:17 Set A/D encoding result=40 06:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:17 Set channel filter=0.000000e+000 result=40 06:38:17 Config A/D Result=40 06:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:17 Get A/D filter: -9.255963e+061 result=40 06:38:17 Get A/D value=-858993460 result=40 06:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:17 Aux= 06:38:17 Message to Camera, serial 265673 queued 06:38:26 Received message from Master: op=Shutter serial=265683 06:38:26 Shutter LASER close 06:38:26 Received message from Master: op=PointingHead serial=265687 06:38:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:38:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:38:26 Point started: ret=0 06:38:26 point_skyscan result=0 06:38:27 Check angles 06:38:27 SkyScan query 06:38:28 SkyScan query done: ret=0 az=90.015<-6001 ze=157.365<-1509 Statuses=0009 0009 06:38:28 Msec=0 True Az=90.015 Ze=157.365 Az status=0009 Ze status=0009 06:38:28 Check angles 06:38:28 SkyScan query 06:38:28 SkyScan query done: ret=0 az=72.585<-4839 ze=136.395<-2907 Statuses=0009 0009 06:38:28 Msec=750 True Az=72.585 Ze=136.395 Az status=0009 Ze status=0009 06:38:29 Check angles 06:38:29 SkyScan query 06:38:29 SkyScan query done: ret=0 az=54.72<-3648 ze=115.005<-4333 Statuses=0009 0009 06:38:29 Msec=1500 True Az=54.72 Ze=115.005 Az status=0009 Ze status=0009 06:38:29 Check angles 06:38:29 SkyScan query 06:38:30 SkyScan query done: ret=0 az=40.98<-2732 ze=93.615<-5759 Statuses=0009 0009 06:38:30 Msec=2250 True Az=40.98 Ze=93.615 Az status=0009 Ze status=0009 06:38:30 Check angles 06:38:30 SkyScan query 06:38:31 SkyScan query done: ret=0 az=40.995<-2733 ze=72.645<-7157 Statuses=0008 0009 06:38:31 Msec=3000 True Az=40.995 Ze=72.645 Az status=0008 Ze status=0009 06:38:31 Check angles 06:38:31 SkyScan query 06:38:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 06:38:31 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 06:38:32 Check angles 06:38:32 SkyScan query 06:38:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:38:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:38:32 Message to Master queued w/err=0: serial=265687 error=0 06:38:37 Received message from Master: op=Filter serial=265688 06:38:37 Color wheel filter change from 0 to 0 06:38:37 FLIGetFilterPos err=0 currentPosition=0 06:38:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:37 Filter is already there-color wheel unchanged 06:38:37 Received message from Master: op=Shutter serial=265689 06:38:37 Shutter LASER close 06:38:38 Received message from Camera: op=State serial=265691 06:38:38 GetSingleValue result=40 Value=cccccccc 06:38:38 SkyScan query 06:38:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:38:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:38 Parameters OK 06:38:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:38 Set A/D data flow result=40 06:38:38 Set A/D channel type result=40 06:38:38 Set A/D encoding result=40 06:38:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:38 Set channel filter=0.000000e+000 result=40 06:38:38 Config A/D Result=40 06:38:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:38 Get A/D filter: -9.255963e+061 result=40 06:38:38 Get A/D value=-858993460 result=40 06:38:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:38 Parameters OK 06:38:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:38 Set A/D data flow result=40 06:38:38 Set A/D channel type result=40 06:38:38 Set A/D encoding result=40 06:38:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:38 Set channel filter=0.000000e+000 result=40 06:38:38 Config A/D Result=40 06:38:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:38 Get A/D filter: -9.255963e+061 result=40 06:38:38 Get A/D value=-858993460 result=40 06:38:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:38 Aux= 06:38:38 Message to Camera, serial 265691 queued 06:39:15 Received message from Master: op=PointingHead serial=265704 06:39:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:39:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:39:16 Point started: ret=0 06:39:16 point_skyscan result=0 06:39:16 Check angles 06:39:16 SkyScan query 06:39:17 SkyScan query done: ret=0 az=63.825<-4255 ze=81.12<-6592 Statuses=0009 0009 06:39:17 Msec=0 True Az=63.825 Ze=81.12 Az status=0009 Ze status=0009 06:39:17 Check angles 06:39:17 SkyScan query 06:39:18 SkyScan query done: ret=0 az=81.225<-5415 ze=102.09<-5194 Statuses=0009 0009 06:39:18 Msec=750 True Az=81.225 Ze=102.09 Az status=0009 Ze status=0009 06:39:18 Check angles 06:39:18 SkyScan query 06:39:18 SkyScan query done: ret=0 az=98.655<-6577 ze=123.015<-3799 Statuses=0009 0009 06:39:18 Msec=1500 True Az=98.655 Ze=123.015 Az status=0009 Ze status=0009 06:39:19 Check angles 06:39:19 SkyScan query 06:39:19 SkyScan query done: ret=0 az=116.1<-7740 ze=143.985<-2401 Statuses=0009 0009 06:39:19 Msec=2250 True Az=116.1 Ze=143.985 Az status=0009 Ze status=0009 06:39:19 Check angles 06:39:19 SkyScan query 06:39:20 SkyScan query done: ret=0 az=130.965<-8731 ze=164.925<-1005 Statuses=0009 0009 06:39:20 Msec=3000 True Az=130.965 Ze=164.925 Az status=0009 Ze status=0009 06:39:20 Check angles 06:39:20 SkyScan query 06:39:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-174.135<-23609 Statuses=0008 0009 06:39:21 Msec=3750 True Az=130.995 Ze=-174.135 Az status=0008 Ze status=0009 06:39:21 Check angles 06:39:21 SkyScan query 06:39:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-153.165<-22211 Statuses=0008 0009 06:39:21 Msec=4500 True Az=130.995 Ze=-153.165 Az status=0008 Ze status=0009 06:39:22 Check angles 06:39:22 SkyScan query 06:39:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:39:22 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:39:22 Message to Master queued w/err=0: serial=265704 error=0 06:39:27 Received message from Master: op=Filter serial=265705 06:39:27 Color wheel filter change from 0 to 0 06:39:27 FLIGetFilterPos err=0 currentPosition=0 06:39:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:27 Filter is already there-color wheel unchanged 06:39:27 Received message from Master: op=Shutter serial=265706 06:39:27 Shutter LASER close 06:39:27 Received message from Camera: op=State serial=265708 06:39:27 GetSingleValue result=40 Value=cccccccc 06:39:27 SkyScan query 06:39:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:39:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:28 Parameters OK 06:39:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:28 Set A/D data flow result=40 06:39:28 Set A/D channel type result=40 06:39:28 Set A/D encoding result=40 06:39:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:28 Set channel filter=0.000000e+000 result=40 06:39:28 Config A/D Result=40 06:39:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:28 Get A/D filter: -9.255963e+061 result=40 06:39:28 Get A/D value=-858993460 result=40 06:39:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:28 Parameters OK 06:39:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:28 Set A/D data flow result=40 06:39:28 Set A/D channel type result=40 06:39:28 Set A/D encoding result=40 06:39:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:28 Set channel filter=0.000000e+000 result=40 06:39:28 Config A/D Result=40 06:39:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:28 Get A/D filter: -9.255963e+061 result=40 06:39:28 Get A/D value=-858993460 result=40 06:39:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:28 Aux= 06:39:28 Message to Camera, serial 265708 queued 06:40:05 Received message from Master: op=PointingHead serial=265721 06:40:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:40:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:40:05 Point started: ret=0 06:40:05 point_skyscan result=0 06:40:06 Check angles 06:40:06 SkyScan query 06:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0009 0009 06:40:06 Msec=0 True Az=112.995 Ze=-171.045 Az status=0009 Ze status=0009 06:40:07 Check angles 06:40:07 SkyScan query 06:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:40:07 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:40:07 Message to Master queued w/err=0: serial=265721 error=0 06:40:12 Received message from Master: op=Filter serial=265722 06:40:12 Color wheel filter change from 0 to 0 06:40:12 FLIGetFilterPos err=0 currentPosition=0 06:40:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:12 Filter is already there-color wheel unchanged 06:40:12 Received message from Master: op=Shutter serial=265723 06:40:12 Shutter LASER open 06:40:13 Received message from Camera: op=State serial=265725 06:40:13 GetSingleValue result=40 Value=cccccccc 06:40:13 SkyScan query 06:40:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:40:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:13 Parameters OK 06:40:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:13 Set A/D data flow result=40 06:40:13 Set A/D channel type result=40 06:40:13 Set A/D encoding result=40 06:40:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:13 Set channel filter=0.000000e+000 result=40 06:40:13 Config A/D Result=40 06:40:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:13 Get A/D filter: -9.255963e+061 result=40 06:40:13 Get A/D value=-858993460 result=40 06:40:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:13 Parameters OK 06:40:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:13 Set A/D data flow result=40 06:40:13 Set A/D channel type result=40 06:40:13 Set A/D encoding result=40 06:40:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:13 Set channel filter=0.000000e+000 result=40 06:40:13 Config A/D Result=40 06:40:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:13 Get A/D filter: -9.255963e+061 result=40 06:40:13 Get A/D value=-858993460 result=40 06:40:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:13 Aux= 06:40:13 Message to Camera, serial 265725 queued 06:40:22 Received message from Master: op=Shutter serial=265735 06:40:22 Shutter LASER close 06:40:22 Received message from Master: op=PointingHead serial=265739 06:40:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:40:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:40:22 Point started: ret=0 06:40:22 point_skyscan result=0 06:40:23 Check angles 06:40:23 SkyScan query 06:40:24 SkyScan query done: ret=0 az=136.425<-9095 ze=-142.77<-21518 Statuses=0009 0009 06:40:24 Msec=0 True Az=136.425 Ze=-142.77 Az status=0009 Ze status=0009 06:40:24 Check angles 06:40:24 SkyScan query 06:40:25 SkyScan query done: ret=0 az=154.23<-10282 ze=-121.38<-20092 Statuses=0009 0009 06:40:25 Msec=750 True Az=154.23 Ze=-121.38 Az status=0009 Ze status=0009 06:40:25 Check angles 06:40:25 SkyScan query 06:40:25 SkyScan query done: ret=0 az=171.795<-11453 ze=-100.32<-18688 Statuses=0009 0009 06:40:25 Msec=1500 True Az=171.795 Ze=-100.32 Az status=0009 Ze status=0009 06:40:26 Check angles 06:40:26 SkyScan query 06:40:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.41<-17294 Statuses=0008 0009 06:40:26 Msec=2250 True Az=175.995 Ze=-79.41 Az status=0008 Ze status=0009 06:40:26 Check angles 06:40:26 SkyScan query 06:40:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.035<-15869 Statuses=0008 0009 06:40:27 Msec=3000 True Az=176.01 Ze=-58.035 Az status=0008 Ze status=0009 06:40:27 Check angles 06:40:27 SkyScan query 06:40:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:40:28 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:40:28 Message to Master queued w/err=0: serial=265739 error=0 06:40:33 Received message from Master: op=Filter serial=265740 06:40:33 Color wheel filter change from 0 to 0 06:40:33 FLIGetFilterPos err=0 currentPosition=0 06:40:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:33 Filter is already there-color wheel unchanged 06:40:33 Received message from Master: op=Shutter serial=265741 06:40:33 Shutter LASER close 06:40:33 Received message from Camera: op=State serial=265743 06:40:33 GetSingleValue result=40 Value=cccccccc 06:40:33 SkyScan query 06:40:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:40:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:34 Parameters OK 06:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:34 Set A/D data flow result=40 06:40:34 Set A/D channel type result=40 06:40:34 Set A/D encoding result=40 06:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:34 Set channel filter=0.000000e+000 result=40 06:40:34 Config A/D Result=40 06:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:34 Get A/D filter: -9.255963e+061 result=40 06:40:34 Get A/D value=-858993460 result=40 06:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:34 Parameters OK 06:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:34 Set A/D data flow result=40 06:40:34 Set A/D channel type result=40 06:40:34 Set A/D encoding result=40 06:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:34 Set channel filter=0.000000e+000 result=40 06:40:34 Config A/D Result=40 06:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:34 Get A/D filter: -9.255963e+061 result=40 06:40:34 Get A/D value=-858993460 result=40 06:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:34 Aux= 06:40:34 Message to Camera, serial 265743 queued 06:41:09 Received message from Master: op=PointingHead serial=265755 06:41:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:41:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:41:10 Point started: ret=0 06:41:10 point_skyscan result=0 06:41:11 Check angles 06:41:11 SkyScan query 06:41:11 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.18<-13412 Statuses=0009 0009 06:41:11 Msec=0 True Az=152.58 Ze=-21.18 Az status=0009 Ze status=0009 06:41:11 Check angles 06:41:11 SkyScan query 06:41:12 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.27<-12018 Statuses=0009 0009 06:41:12 Msec=750 True Az=135.09 Ze=-0.27 Az status=0009 Ze status=0009 06:41:12 Check angles 06:41:12 SkyScan query 06:41:13 SkyScan query done: ret=0 az=117.63<-7842 ze=20.7<-10620 Statuses=0009 0009 06:41:13 Msec=1500 True Az=117.63 Ze=20.7 Az status=0009 Ze status=0009 06:41:13 Check angles 06:41:13 SkyScan query 06:41:13 SkyScan query done: ret=0 az=100.23<-6682 ze=41.67<-9222 Statuses=0009 0009 06:41:13 Msec=2250 True Az=100.23 Ze=41.67 Az status=0009 Ze status=0009 06:41:14 Check angles 06:41:14 SkyScan query 06:41:14 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 06:41:14 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 06:41:14 Check angles 06:41:14 SkyScan query 06:41:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:41:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:41:15 Message to Master queued w/err=0: serial=265755 error=0 06:41:20 Received message from Master: op=Filter serial=265756 06:41:20 Color wheel filter change from 0 to 0 06:41:20 FLIGetFilterPos err=0 currentPosition=0 06:41:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:20 Filter is already there-color wheel unchanged 06:41:20 Received message from Master: op=Shutter serial=265757 06:41:20 Shutter LASER close 06:41:20 Received message from Camera: op=State serial=265759 06:41:20 GetSingleValue result=40 Value=cccccccc 06:41:20 SkyScan query 06:41:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:41:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:21 Parameters OK 06:41:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:21 Set A/D data flow result=40 06:41:21 Set A/D channel type result=40 06:41:21 Set A/D encoding result=40 06:41:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:21 Set channel filter=0.000000e+000 result=40 06:41:21 Config A/D Result=40 06:41:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:21 Get A/D filter: -9.255963e+061 result=40 06:41:21 Get A/D value=-858993460 result=40 06:41:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:21 Parameters OK 06:41:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:21 Set A/D data flow result=40 06:41:21 Set A/D channel type result=40 06:41:21 Set A/D encoding result=40 06:41:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:21 Set channel filter=0.000000e+000 result=40 06:41:21 Config A/D Result=40 06:41:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:21 Get A/D filter: -9.255963e+061 result=40 06:41:21 Get A/D value=-858993460 result=40 06:41:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:21 Aux= 06:41:21 Message to Camera, serial 265759 queued 06:41:58 Received message from Master: op=PointingHead serial=265772 06:41:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:41:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:41:58 Point started: ret=0 06:41:58 point_skyscan result=0 06:41:59 Check angles 06:41:59 SkyScan query 06:41:59 SkyScan query done: ret=0 az=85.995<-5733 ze=21.255<-10583 Statuses=0008 0009 06:41:59 Msec=0 True Az=85.995 Ze=21.255 Az status=0008 Ze status=0009 06:42:00 Check angles 06:42:00 SkyScan query 06:42:00 SkyScan query done: ret=0 az=86.01<-5734 ze=0.285<-11981 Statuses=0008 0009 06:42:00 Msec=750 True Az=86.01 Ze=0.285 Az status=0008 Ze status=0009 06:42:00 Check angles 06:42:00 SkyScan query 06:42:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.67<-13378 Statuses=0008 0009 06:42:01 Msec=1500 True Az=85.995 Ze=-20.67 Az status=0008 Ze status=0009 06:42:01 Check angles 06:42:01 SkyScan query 06:42:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.61<-14774 Statuses=0008 0009 06:42:02 Msec=2250 True Az=85.995 Ze=-41.61 Az status=0008 Ze status=0009 06:42:02 Check angles 06:42:02 SkyScan query 06:42:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:42:02 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:42:02 Message to Master queued w/err=0: serial=265772 error=0 06:42:07 Received message from Master: op=Filter serial=265773 06:42:07 Color wheel filter change from 0 to 0 06:42:07 FLIGetFilterPos err=0 currentPosition=0 06:42:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:07 Filter is already there-color wheel unchanged 06:42:08 Received message from Master: op=Shutter serial=265774 06:42:08 Shutter LASER close 06:42:08 Received message from Camera: op=State serial=265776 06:42:08 GetSingleValue result=40 Value=cccccccc 06:42:08 SkyScan query 06:42:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:42:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:08 Parameters OK 06:42:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:08 Set A/D data flow result=40 06:42:08 Set A/D channel type result=40 06:42:08 Set A/D encoding result=40 06:42:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:08 Set channel filter=0.000000e+000 result=40 06:42:08 Config A/D Result=40 06:42:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:08 Get A/D filter: -9.255963e+061 result=40 06:42:08 Get A/D value=-858993460 result=40 06:42:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:08 Parameters OK 06:42:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:08 Set A/D data flow result=40 06:42:08 Set A/D channel type result=40 06:42:08 Set A/D encoding result=40 06:42:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:08 Set channel filter=0.000000e+000 result=40 06:42:08 Config A/D Result=40 06:42:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:08 Get A/D filter: -9.255963e+061 result=40 06:42:08 Get A/D value=-858993460 result=40 06:42:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:08 Aux= 06:42:08 Message to Camera, serial 265776 queued 06:42:45 Received message from Master: op=PointingHead serial=265789 06:42:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:42:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:42:45 Point started: ret=0 06:42:45 point_skyscan result=0 06:42:46 Check angles 06:42:46 SkyScan query 06:42:47 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.21<-17414 Statuses=0009 0009 06:42:47 Msec=0 True Az=109.02 Ze=-81.21 Az status=0009 Ze status=0009 06:42:47 Check angles 06:42:47 SkyScan query 06:42:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 06:42:47 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 06:42:48 Check angles 06:42:48 SkyScan query 06:42:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.12<-20208 Statuses=0008 0009 06:42:48 Msec=1500 True Az=112.995 Ze=-123.12 Az status=0008 Ze status=0009 06:42:48 Check angles 06:42:48 SkyScan query 06:42:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.09<-21606 Statuses=0008 0009 06:42:49 Msec=2250 True Az=112.995 Ze=-144.09 Az status=0008 Ze status=0009 06:42:49 Check angles 06:42:49 SkyScan query 06:42:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.465<-23031 Statuses=0008 0009 06:42:50 Msec=3000 True Az=112.995 Ze=-165.465 Az status=0008 Ze status=0009 06:42:50 Check angles 06:42:50 SkyScan query 06:42:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:42:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:42:50 Message to Master queued w/err=0: serial=265789 error=0 06:42:55 Received message from Master: op=Filter serial=265790 06:42:55 Color wheel filter change from 0 to 0 06:42:55 FLIGetFilterPos err=0 currentPosition=0 06:42:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:55 Filter is already there-color wheel unchanged 06:42:56 Received message from Master: op=Shutter serial=265791 06:42:56 Shutter LASER open 06:42:56 Received message from Camera: op=State serial=265793 06:42:56 GetSingleValue result=40 Value=cccccccc 06:42:56 SkyScan query 06:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:42:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:56 Parameters OK 06:42:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:56 Set A/D data flow result=40 06:42:56 Set A/D channel type result=40 06:42:56 Set A/D encoding result=40 06:42:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:56 Set channel filter=0.000000e+000 result=40 06:42:56 Config A/D Result=40 06:42:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:56 Get A/D filter: -9.255963e+061 result=40 06:42:56 Get A/D value=-858993460 result=40 06:42:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:56 Parameters OK 06:42:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:56 Set A/D data flow result=40 06:42:56 Set A/D channel type result=40 06:42:56 Set A/D encoding result=40 06:42:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:56 Set channel filter=0.000000e+000 result=40 06:42:56 Config A/D Result=40 06:42:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:56 Get A/D filter: -9.255963e+061 result=40 06:42:56 Get A/D value=-858993460 result=40 06:42:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:56 Aux= 06:42:56 Message to Camera, serial 265793 queued 06:43:05 Received message from Master: op=Shutter serial=265803 06:43:05 Shutter LASER close 06:43:05 Received message from Master: op=PointingHead serial=265807 06:43:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:43:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:43:06 Point started: ret=0 06:43:06 point_skyscan result=0 06:43:06 Check angles 06:43:06 SkyScan query 06:43:07 SkyScan query done: ret=0 az=89.58<-5972 ze=156.87<-1542 Statuses=0009 0009 06:43:07 Msec=0 True Az=89.58 Ze=156.87 Az status=0009 Ze status=0009 06:43:07 Check angles 06:43:07 SkyScan query 06:43:08 SkyScan query done: ret=0 az=72.045<-4803 ze=135.93<-2938 Statuses=0009 0009 06:43:08 Msec=750 True Az=72.045 Ze=135.93 Az status=0009 Ze status=0009 06:43:08 Check angles 06:43:08 SkyScan query 06:43:08 SkyScan query done: ret=0 az=54.69<-3646 ze=114.915<-4339 Statuses=0009 0009 06:43:08 Msec=1500 True Az=54.69 Ze=114.915 Az status=0009 Ze status=0009 06:43:09 Check angles 06:43:09 SkyScan query 06:43:09 SkyScan query done: ret=0 az=40.965<-2731 ze=93.54<-5764 Statuses=0009 0009 06:43:09 Msec=2250 True Az=40.965 Ze=93.54 Az status=0009 Ze status=0009 06:43:09 Check angles 06:43:09 SkyScan query 06:43:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.165<-7189 Statuses=0008 0009 06:43:10 Msec=3000 True Az=40.995 Ze=72.165 Az status=0008 Ze status=0009 06:43:10 Check angles 06:43:10 SkyScan query 06:43:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.11<-8526 Statuses=0008 0009 06:43:11 Msec=3750 True Az=40.995 Ze=52.11 Az status=0008 Ze status=0009 06:43:11 Check angles 06:43:11 SkyScan query 06:43:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:43:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:43:11 Message to Master queued w/err=0: serial=265807 error=0 06:43:16 Received message from Master: op=Filter serial=265808 06:43:16 Color wheel filter change from 0 to 0 06:43:16 FLIGetFilterPos err=0 currentPosition=0 06:43:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:16 Filter is already there-color wheel unchanged 06:43:17 Received message from Master: op=Shutter serial=265809 06:43:17 Shutter LASER close 06:43:17 Received message from Camera: op=State serial=265811 06:43:17 GetSingleValue result=40 Value=cccccccc 06:43:17 SkyScan query 06:43:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:43:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:17 Parameters OK 06:43:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:17 Set A/D data flow result=40 06:43:17 Set A/D channel type result=40 06:43:17 Set A/D encoding result=40 06:43:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:17 Set channel filter=0.000000e+000 result=40 06:43:17 Config A/D Result=40 06:43:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:17 Get A/D filter: -9.255963e+061 result=40 06:43:17 Get A/D value=-858993460 result=40 06:43:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:17 Parameters OK 06:43:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:17 Set A/D data flow result=40 06:43:17 Set A/D channel type result=40 06:43:17 Set A/D encoding result=40 06:43:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:17 Set channel filter=0.000000e+000 result=40 06:43:17 Config A/D Result=40 06:43:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:17 Get A/D filter: -9.255963e+061 result=40 06:43:17 Get A/D value=-858993460 result=40 06:43:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:17 Aux= 06:43:17 Message to Camera, serial 265811 queued 06:43:54 Received message from Master: op=PointingHead serial=265824 06:43:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:43:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:43:55 Point started: ret=0 06:43:55 point_skyscan result=0 06:43:56 Check angles 06:43:56 SkyScan query 06:43:56 SkyScan query done: ret=0 az=64.38<-4292 ze=81.9<-6540 Statuses=0009 0009 06:43:56 Msec=0 True Az=64.38 Ze=81.9 Az status=0009 Ze status=0009 06:43:56 Check angles 06:43:56 SkyScan query 06:43:57 SkyScan query done: ret=0 az=81.885<-5459 ze=102.81<-5146 Statuses=0009 0009 06:43:57 Msec=750 True Az=81.885 Ze=102.81 Az status=0009 Ze status=0009 06:43:57 Check angles 06:43:57 SkyScan query 06:43:58 SkyScan query done: ret=0 az=99.33<-6622 ze=123.765<-3749 Statuses=0009 0009 06:43:58 Msec=1500 True Az=99.33 Ze=123.765 Az status=0009 Ze status=0009 06:43:58 Check angles 06:43:58 SkyScan query 06:43:58 SkyScan query done: ret=0 az=116.82<-7788 ze=144.705<-2353 Statuses=0009 0009 06:43:58 Msec=2250 True Az=116.82 Ze=144.705 Az status=0009 Ze status=0009 06:43:59 Check angles 06:43:59 SkyScan query 06:43:59 SkyScan query done: ret=0 az=130.995<-8733 ze=165.675<-955 Statuses=0009 0009 06:43:59 Msec=3000 True Az=130.995 Ze=165.675 Az status=0009 Ze status=0009 06:43:59 Check angles 06:43:59 SkyScan query 06:44:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.34<-23556 Statuses=0008 0009 06:44:00 Msec=3750 True Az=130.995 Ze=-173.34 Az status=0008 Ze status=0009 06:44:00 Check angles 06:44:00 SkyScan query 06:44:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.415<-22161 Statuses=0008 0009 06:44:01 Msec=4500 True Az=130.995 Ze=-152.415 Az status=0008 Ze status=0009 06:44:01 Check angles 06:44:01 SkyScan query 06:44:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:44:01 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:44:01 Message to Master queued w/err=0: serial=265824 error=0 06:44:06 Received message from Master: op=Filter serial=265825 06:44:06 Color wheel filter change from 0 to 0 06:44:06 FLIGetFilterPos err=0 currentPosition=0 06:44:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:06 Filter is already there-color wheel unchanged 06:44:07 Received message from Master: op=Shutter serial=265826 06:44:07 Shutter LASER close 06:44:07 Received message from Camera: op=State serial=265828 06:44:07 GetSingleValue result=40 Value=cccccccc 06:44:07 SkyScan query 06:44:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:44:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:07 Parameters OK 06:44:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:07 Set A/D data flow result=40 06:44:07 Set A/D channel type result=40 06:44:07 Set A/D encoding result=40 06:44:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:07 Set channel filter=0.000000e+000 result=40 06:44:07 Config A/D Result=40 06:44:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:07 Get A/D filter: -9.255963e+061 result=40 06:44:07 Get A/D value=-858993460 result=40 06:44:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:07 Parameters OK 06:44:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:07 Set A/D data flow result=40 06:44:07 Set A/D channel type result=40 06:44:07 Set A/D encoding result=40 06:44:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:07 Set channel filter=0.000000e+000 result=40 06:44:07 Config A/D Result=40 06:44:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:07 Get A/D filter: -9.255963e+061 result=40 06:44:07 Get A/D value=-858993460 result=40 06:44:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:07 Aux= 06:44:07 Message to Camera, serial 265828 queued 06:44:44 Received message from Master: op=PointingHead serial=265841 06:44:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:44:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:44:44 Point started: ret=0 06:44:44 point_skyscan result=0 06:44:45 Check angles 06:44:45 SkyScan query 06:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0009 0009 06:44:46 Msec=0 True Az=112.995 Ze=-171.075 Az status=0009 Ze status=0009 06:44:46 Check angles 06:44:46 SkyScan query 06:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:44:46 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:44:46 Message to Master queued w/err=0: serial=265841 error=0 06:44:51 Received message from Master: op=Filter serial=265842 06:44:51 Color wheel filter change from 0 to 0 06:44:51 FLIGetFilterPos err=0 currentPosition=0 06:44:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:51 Filter is already there-color wheel unchanged 06:44:52 Received message from Master: op=Shutter serial=265843 06:44:52 Shutter LASER open 06:44:52 Received message from Camera: op=State serial=265845 06:44:52 GetSingleValue result=40 Value=cccccccc 06:44:52 SkyScan query 06:44:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:44:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:52 Parameters OK 06:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:52 Set A/D data flow result=40 06:44:52 Set A/D channel type result=40 06:44:52 Set A/D encoding result=40 06:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:52 Set channel filter=0.000000e+000 result=40 06:44:52 Config A/D Result=40 06:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:52 Get A/D filter: -9.255963e+061 result=40 06:44:52 Get A/D value=-858993460 result=40 06:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:52 Parameters OK 06:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:52 Set A/D data flow result=40 06:44:52 Set A/D channel type result=40 06:44:52 Set A/D encoding result=40 06:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:52 Set channel filter=0.000000e+000 result=40 06:44:52 Config A/D Result=40 06:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:52 Get A/D filter: -9.255963e+061 result=40 06:44:52 Get A/D value=-858993460 result=40 06:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:52 Aux= 06:44:52 Message to Camera, serial 265845 queued 06:45:01 Received message from Master: op=Shutter serial=265855 06:45:01 Shutter LASER close 06:45:01 Received message from Master: op=PointingHead serial=265859 06:45:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:45:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:45:02 Point started: ret=0 06:45:02 point_skyscan result=0 06:45:02 Check angles 06:45:02 SkyScan query 06:45:03 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.52<-21568 Statuses=0009 0009 06:45:03 Msec=0 True Az=135.735 Ze=-143.52 Az status=0009 Ze status=0009 06:45:03 Check angles 06:45:03 SkyScan query 06:45:04 SkyScan query done: ret=0 az=153.21<-10214 ze=-122.55<-20170 Statuses=0009 0009 06:45:04 Msec=750 True Az=153.21 Ze=-122.55 Az status=0009 Ze status=0009 06:45:04 Check angles 06:45:04 SkyScan query 06:45:05 SkyScan query done: ret=0 az=170.7<-11380 ze=-101.67<-18778 Statuses=0009 0009 06:45:05 Msec=1500 True Az=170.7 Ze=-101.67 Az status=0009 Ze status=0009 06:45:05 Check angles 06:45:05 SkyScan query 06:45:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.64<-17376 Statuses=0008 0009 06:45:05 Msec=2250 True Az=175.995 Ze=-80.64 Az status=0008 Ze status=0009 06:45:05 Check angles 06:45:05 SkyScan query 06:45:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.715<-15981 Statuses=0008 0009 06:45:06 Msec=3000 True Az=175.995 Ze=-59.715 Az status=0008 Ze status=0009 06:45:06 Check angles 06:45:06 SkyScan query 06:45:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:45:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:45:07 Message to Master queued w/err=0: serial=265859 error=0 06:45:12 Received message from Master: op=Filter serial=265860 06:45:12 Color wheel filter change from 0 to 0 06:45:12 FLIGetFilterPos err=0 currentPosition=0 06:45:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:12 Filter is already there-color wheel unchanged 06:45:12 Received message from Master: op=Shutter serial=265861 06:45:12 Shutter LASER close 06:45:12 Received message from Camera: op=State serial=265863 06:45:12 GetSingleValue result=40 Value=cccccccc 06:45:12 SkyScan query 06:45:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:45:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:13 Parameters OK [UTC 2018-12-19 06:45:13] 06:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:13 Set A/D data flow result=40 06:45:13 Set A/D channel type result=40 06:45:13 Set A/D encoding result=40 06:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:13 Set channel filter=0.000000e+000 result=40 06:45:13 Config A/D Result=40 06:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:13 Get A/D filter: -9.255963e+061 result=40 06:45:13 Get A/D value=-858993460 result=40 06:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:13 Parameters OK 06:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:13 Set A/D data flow result=40 06:45:13 Set A/D channel type result=40 06:45:13 Set A/D encoding result=40 06:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:13 Set channel filter=0.000000e+000 result=40 06:45:13 Config A/D Result=40 06:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:13 Get A/D filter: -9.255963e+061 result=40 06:45:13 Get A/D value=-858993460 result=40 06:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:13 Aux= 06:45:13 Message to Camera, serial 265863 queued 06:45:27 Received message from Master: op=Identify serial=265864 06:45:49 Received message from Master: op=PointingHead serial=265878 06:45:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:45:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:45:49 Point started: ret=0 06:45:49 point_skyscan result=0 06:45:50 Check angles 06:45:50 SkyScan query 06:45:50 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.765<-13451 Statuses=0009 0009 06:45:50 Msec=0 True Az=152.91 Ze=-21.765 Az status=0009 Ze status=0009 06:45:51 Check angles 06:45:51 SkyScan query 06:45:51 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.735<-12049 Statuses=0009 0009 06:45:51 Msec=750 True Az=135.42 Ze=-0.735 Az status=0009 Ze status=0009 06:45:51 Check angles 06:45:51 SkyScan query 06:45:52 SkyScan query done: ret=0 az=117.87<-7858 ze=20.16<-10656 Statuses=0009 0009 06:45:52 Msec=1500 True Az=117.87 Ze=20.16 Az status=0009 Ze status=0009 06:45:52 Check angles 06:45:52 SkyScan query 06:45:53 SkyScan query done: ret=0 az=100.56<-6704 ze=41.175<-9255 Statuses=0009 0009 06:45:53 Msec=2250 True Az=100.56 Ze=41.175 Az status=0009 Ze status=0009 06:45:53 Check angles 06:45:53 SkyScan query 06:45:53 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 06:45:53 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 06:45:54 Check angles 06:45:54 SkyScan query 06:45:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:45:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:45:54 Message to Master queued w/err=0: serial=265878 error=0 06:45:59 Received message from Master: op=Filter serial=265879 06:45:59 Color wheel filter change from 0 to 0 06:45:59 FLIGetFilterPos err=0 currentPosition=0 06:45:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:59 Filter is already there-color wheel unchanged 06:45:59 Received message from Master: op=Shutter serial=265880 06:45:59 Shutter LASER close 06:45:59 Received message from Camera: op=State serial=265882 06:45:59 GetSingleValue result=40 Value=cccccccc 06:45:59 SkyScan query 06:46:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:46:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:00 Parameters OK 06:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:00 Set A/D data flow result=40 06:46:00 Set A/D channel type result=40 06:46:00 Set A/D encoding result=40 06:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:00 Set channel filter=0.000000e+000 result=40 06:46:00 Config A/D Result=40 06:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:00 Get A/D filter: -9.255963e+061 result=40 06:46:00 Get A/D value=-858993460 result=40 06:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:00 Parameters OK 06:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:00 Set A/D data flow result=40 06:46:00 Set A/D channel type result=40 06:46:00 Set A/D encoding result=40 06:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:00 Set channel filter=0.000000e+000 result=40 06:46:00 Config A/D Result=40 06:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:00 Get A/D filter: -9.255963e+061 result=40 06:46:00 Get A/D value=-858993460 result=40 06:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:00 Aux= 06:46:00 Message to Camera, serial 265882 queued 06:46:37 Received message from Master: op=PointingHead serial=265895 06:46:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:46:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:46:37 Point started: ret=0 06:46:37 point_skyscan result=0 06:46:38 Check angles 06:46:38 SkyScan query 06:46:39 SkyScan query done: ret=0 az=85.995<-5733 ze=21.45<-10570 Statuses=0008 0009 06:46:39 Msec=0 True Az=85.995 Ze=21.45 Az status=0008 Ze status=0009 06:46:39 Check angles 06:46:39 SkyScan query 06:46:39 SkyScan query done: ret=0 az=85.995<-5733 ze=0.54<-11964 Statuses=0008 0009 06:46:39 Msec=750 True Az=85.995 Ze=0.54 Az status=0008 Ze status=0009 06:46:39 Check angles 06:46:39 SkyScan query 06:46:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.445<-13363 Statuses=0008 0009 06:46:40 Msec=1500 True Az=85.995 Ze=-20.445 Az status=0008 Ze status=0009 06:46:40 Check angles 06:46:40 SkyScan query 06:46:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.34<-14756 Statuses=0008 0009 06:46:41 Msec=2250 True Az=85.995 Ze=-41.34 Az status=0008 Ze status=0009 06:46:41 Check angles 06:46:41 SkyScan query 06:46:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:46:42 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:46:42 Message to Master queued w/err=0: serial=265895 error=0 06:46:47 Received message from Master: op=Filter serial=265896 06:46:47 Color wheel filter change from 0 to 0 06:46:47 FLIGetFilterPos err=0 currentPosition=0 06:46:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:47 Filter is already there-color wheel unchanged 06:46:47 Received message from Master: op=Shutter serial=265897 06:46:47 Shutter LASER close 06:46:47 Received message from Camera: op=State serial=265899 06:46:47 GetSingleValue result=40 Value=cccccccc 06:46:47 SkyScan query 06:46:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:46:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:47 Parameters OK 06:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:47 Set A/D data flow result=40 06:46:47 Set A/D channel type result=40 06:46:47 Set A/D encoding result=40 06:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:47 Set channel filter=0.000000e+000 result=40 06:46:47 Config A/D Result=40 06:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:47 Get A/D filter: -9.255963e+061 result=40 06:46:47 Get A/D value=-858993460 result=40 06:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:47 Parameters OK 06:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:47 Set A/D data flow result=40 06:46:47 Set A/D channel type result=40 06:46:47 Set A/D encoding result=40 06:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:47 Set channel filter=0.000000e+000 result=40 06:46:47 Config A/D Result=40 06:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:47 Get A/D filter: -9.255963e+061 result=40 06:46:47 Get A/D value=-858993460 result=40 06:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:47 Aux= 06:46:47 Message to Camera, serial 265899 queued 06:47:24 Received message from Master: op=PointingHead serial=265912 06:47:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:47:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:47:24 Point started: ret=0 06:47:24 point_skyscan result=0 06:47:25 Check angles 06:47:25 SkyScan query 06:47:26 SkyScan query done: ret=0 az=108.795<-7253 ze=-80.97<-17398 Statuses=0009 0009 06:47:26 Msec=0 True Az=108.795 Ze=-80.97 Az status=0009 Ze status=0009 06:47:26 Check angles 06:47:26 SkyScan query 06:47:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 06:47:27 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 06:47:27 Check angles 06:47:27 SkyScan query 06:47:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.375<-20225 Statuses=0008 0009 06:47:27 Msec=1500 True Az=112.995 Ze=-123.375 Az status=0008 Ze status=0009 06:47:27 Check angles 06:47:27 SkyScan query 06:47:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 06:47:28 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 06:47:28 Check angles 06:47:28 SkyScan query 06:47:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.675<-23045 Statuses=0008 0009 06:47:29 Msec=3000 True Az=112.995 Ze=-165.675 Az status=0008 Ze status=0009 06:47:29 Check angles 06:47:29 SkyScan query 06:47:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:47:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:47:30 Message to Master queued w/err=0: serial=265912 error=0 06:47:35 Received message from Master: op=Filter serial=265913 06:47:35 Color wheel filter change from 0 to 0 06:47:35 FLIGetFilterPos err=0 currentPosition=0 06:47:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:35 Filter is already there-color wheel unchanged 06:47:35 Received message from Master: op=Shutter serial=265914 06:47:35 Shutter LASER open 06:47:35 Received message from Camera: op=State serial=265916 06:47:35 GetSingleValue result=40 Value=cccccccc 06:47:35 SkyScan query 06:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:36 Parameters OK 06:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:36 Set A/D data flow result=40 06:47:36 Set A/D channel type result=40 06:47:36 Set A/D encoding result=40 06:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:36 Set channel filter=0.000000e+000 result=40 06:47:36 Config A/D Result=40 06:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:36 Get A/D filter: -9.255963e+061 result=40 06:47:36 Get A/D value=-858993460 result=40 06:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:36 Parameters OK 06:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:36 Set A/D data flow result=40 06:47:36 Set A/D channel type result=40 06:47:36 Set A/D encoding result=40 06:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:36 Set channel filter=0.000000e+000 result=40 06:47:36 Config A/D Result=40 06:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:36 Get A/D filter: -9.255963e+061 result=40 06:47:36 Get A/D value=-858993460 result=40 06:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:36 Aux= 06:47:36 Message to Camera, serial 265916 queued 06:47:44 Received message from Master: op=Shutter serial=265926 06:47:44 Shutter LASER close 06:47:44 Received message from Master: op=PointingHead serial=265930 06:47:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:47:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:47:45 Point started: ret=0 06:47:45 point_skyscan result=0 06:47:45 Check angles 06:47:45 SkyScan query 06:47:46 SkyScan query done: ret=0 az=89.85<-5990 ze=157.305<-1513 Statuses=0009 0009 06:47:46 Msec=0 True Az=89.85 Ze=157.305 Az status=0009 Ze status=0009 06:47:46 Check angles 06:47:46 SkyScan query 06:47:47 SkyScan query done: ret=0 az=72.525<-4835 ze=136.35<-2910 Statuses=0009 0009 06:47:47 Msec=750 True Az=72.525 Ze=136.35 Az status=0009 Ze status=0009 06:47:47 Check angles 06:47:47 SkyScan query 06:47:48 SkyScan query done: ret=0 az=54.72<-3648 ze=114.945<-4337 Statuses=0009 0009 06:47:48 Msec=1500 True Az=54.72 Ze=114.945 Az status=0009 Ze status=0009 06:47:48 Check angles 06:47:48 SkyScan query 06:47:48 SkyScan query done: ret=0 az=40.98<-2732 ze=94.02<-5732 Statuses=0009 0009 06:47:48 Msec=2250 True Az=40.98 Ze=94.02 Az status=0009 Ze status=0009 06:47:48 Check angles 06:47:48 SkyScan query 06:47:49 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 06:47:49 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 06:47:49 Check angles 06:47:49 SkyScan query 06:47:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 06:47:50 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 06:47:50 Check angles 06:47:50 SkyScan query 06:47:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:47:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:47:51 Message to Master queued w/err=0: serial=265930 error=0 06:47:56 Received message from Master: op=Filter serial=265931 06:47:56 Color wheel filter change from 0 to 0 06:47:56 FLIGetFilterPos err=0 currentPosition=0 06:47:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:56 Filter is already there-color wheel unchanged 06:47:56 Received message from Master: op=Shutter serial=265932 06:47:56 Shutter LASER close 06:47:56 Received message from Camera: op=State serial=265934 06:47:56 GetSingleValue result=40 Value=cccccccc 06:47:56 SkyScan query 06:47:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:47:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:56 Parameters OK 06:47:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:56 Set A/D data flow result=40 06:47:56 Set A/D channel type result=40 06:47:56 Set A/D encoding result=40 06:47:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:56 Set channel filter=0.000000e+000 result=40 06:47:56 Config A/D Result=40 06:47:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:56 Get A/D filter: -9.255963e+061 result=40 06:47:56 Get A/D value=-858993460 result=40 06:47:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:56 Parameters OK 06:47:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:56 Set A/D data flow result=40 06:47:56 Set A/D channel type result=40 06:47:56 Set A/D encoding result=40 06:47:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:56 Set channel filter=0.000000e+000 result=40 06:47:56 Config A/D Result=40 06:47:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:56 Get A/D filter: -9.255963e+061 result=40 06:47:56 Get A/D value=-858993460 result=40 06:47:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:56 Aux= 06:47:56 Message to Camera, serial 265934 queued 06:48:34 Received message from Master: op=PointingHead serial=265947 06:48:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:48:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:48:34 Point started: ret=0 06:48:34 point_skyscan result=0 06:48:35 Check angles 06:48:35 SkyScan query 06:48:35 SkyScan query done: ret=0 az=63.735<-4249 ze=81.015<-6599 Statuses=0009 0009 06:48:35 Msec=0 True Az=63.735 Ze=81.015 Az status=0009 Ze status=0009 06:48:35 Check angles 06:48:35 SkyScan query 06:48:36 SkyScan query done: ret=0 az=81.6<-5440 ze=102.435<-5171 Statuses=0009 0009 06:48:36 Msec=750 True Az=81.6 Ze=102.435 Az status=0009 Ze status=0009 06:48:36 Check angles 06:48:36 SkyScan query 06:48:37 SkyScan query done: ret=0 az=99.36<-6624 ze=123.81<-3746 Statuses=0009 0009 06:48:37 Msec=1500 True Az=99.36 Ze=123.81 Az status=0009 Ze status=0009 06:48:37 Check angles 06:48:37 SkyScan query 06:48:37 SkyScan query done: ret=0 az=117.285<-7819 ze=145.185<-2321 Statuses=0009 0009 06:48:37 Msec=2250 True Az=117.285 Ze=145.185 Az status=0009 Ze status=0009 06:48:38 Check angles 06:48:38 SkyScan query 06:48:38 SkyScan query done: ret=0 az=131.025<-8735 ze=166.17<-922 Statuses=0009 0009 06:48:38 Msec=3000 True Az=131.025 Ze=166.17 Az status=0009 Ze status=0009 06:48:38 Check angles 06:48:38 SkyScan query 06:48:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-172.86<-23524 Statuses=0008 0009 06:48:39 Msec=3750 True Az=130.995 Ze=-172.86 Az status=0008 Ze status=0009 06:48:39 Check angles 06:48:39 SkyScan query 06:48:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.92<-22128 Statuses=0008 0009 06:48:40 Msec=4500 True Az=130.995 Ze=-151.92 Az status=0008 Ze status=0009 06:48:40 Check angles 06:48:40 SkyScan query 06:48:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:48:40 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:48:40 Message to Master queued w/err=0: serial=265947 error=0 06:48:45 Received message from Master: op=Filter serial=265948 06:48:45 Color wheel filter change from 0 to 0 06:48:45 FLIGetFilterPos err=0 currentPosition=0 06:48:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:45 Filter is already there-color wheel unchanged 06:48:46 Received message from Master: op=Shutter serial=265949 06:48:46 Shutter LASER close 06:48:46 Received message from Camera: op=State serial=265951 06:48:46 GetSingleValue result=40 Value=cccccccc 06:48:46 SkyScan query 06:48:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:48:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:46 Parameters OK 06:48:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:46 Set A/D data flow result=40 06:48:46 Set A/D channel type result=40 06:48:46 Set A/D encoding result=40 06:48:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:46 Set channel filter=0.000000e+000 result=40 06:48:46 Config A/D Result=40 06:48:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:46 Get A/D filter: -9.255963e+061 result=40 06:48:46 Get A/D value=-858993460 result=40 06:48:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:46 Parameters OK 06:48:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:46 Set A/D data flow result=40 06:48:46 Set A/D channel type result=40 06:48:46 Set A/D encoding result=40 06:48:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:46 Set channel filter=0.000000e+000 result=40 06:48:46 Config A/D Result=40 06:48:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:46 Get A/D filter: -9.255963e+061 result=40 06:48:46 Get A/D value=-858993460 result=40 06:48:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:46 Aux= 06:48:46 Message to Camera, serial 265951 queued 06:49:23 Received message from Master: op=PointingHead serial=265964 06:49:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:49:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:49:23 Point started: ret=0 06:49:23 point_skyscan result=0 06:49:24 Check angles 06:49:24 SkyScan query 06:49:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 06:49:25 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 06:49:25 Check angles 06:49:25 SkyScan query 06:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:49:26 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:49:26 Message to Master queued w/err=0: serial=265964 error=0 06:49:31 Received message from Master: op=Filter serial=265965 06:49:31 Color wheel filter change from 0 to 0 06:49:31 FLIGetFilterPos err=0 currentPosition=0 06:49:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:31 Filter is already there-color wheel unchanged 06:49:31 Received message from Master: op=Shutter serial=265966 06:49:31 Shutter LASER open 06:49:31 Received message from Camera: op=State serial=265968 06:49:31 GetSingleValue result=40 Value=cccccccc 06:49:31 SkyScan query 06:49:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:49:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:31 Parameters OK 06:49:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:31 Set A/D data flow result=40 06:49:31 Set A/D channel type result=40 06:49:31 Set A/D encoding result=40 06:49:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:31 Set channel filter=0.000000e+000 result=40 06:49:31 Config A/D Result=40 06:49:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:31 Get A/D filter: -9.255963e+061 result=40 06:49:31 Get A/D value=-858993460 result=40 06:49:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:31 Parameters OK 06:49:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:31 Set A/D data flow result=40 06:49:31 Set A/D channel type result=40 06:49:31 Set A/D encoding result=40 06:49:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:31 Set channel filter=0.000000e+000 result=40 06:49:31 Config A/D Result=40 06:49:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:31 Get A/D filter: -9.255963e+061 result=40 06:49:31 Get A/D value=-858993460 result=40 06:49:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:31 Aux= 06:49:31 Message to Camera, serial 265968 queued 06:49:40 Received message from Master: op=Shutter serial=265978 06:49:40 Shutter LASER close 06:49:41 Received message from Master: op=PointingHead serial=265982 06:49:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:49:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:49:41 Point started: ret=0 06:49:41 point_skyscan result=0 06:49:42 Check angles 06:49:42 SkyScan query 06:49:42 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.43<-21562 Statuses=0009 0009 06:49:42 Msec=0 True Az=135.885 Ze=-143.43 Az status=0009 Ze status=0009 06:49:42 Check angles 06:49:42 SkyScan query 06:49:43 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.01<-20134 Statuses=0009 0009 06:49:43 Msec=750 True Az=153.63 Ze=-122.01 Az status=0009 Ze status=0009 06:49:43 Check angles 06:49:43 SkyScan query 06:49:44 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.545<-18703 Statuses=0009 0009 06:49:44 Msec=1500 True Az=171.525 Ze=-100.545 Az status=0009 Ze status=0009 06:49:44 Check angles 06:49:44 SkyScan query 06:49:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.68<-17312 Statuses=0008 0009 06:49:45 Msec=2250 True Az=176.01 Ze=-79.68 Az status=0008 Ze status=0009 06:49:45 Check angles 06:49:45 SkyScan query 06:49:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.665<-15911 Statuses=0008 0009 06:49:45 Msec=3000 True Az=176.01 Ze=-58.665 Az status=0008 Ze status=0009 06:49:45 Check angles 06:49:45 SkyScan query 06:49:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:49:46 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:49:46 Message to Master queued w/err=0: serial=265982 error=0 06:49:51 Received message from Master: op=Filter serial=265983 06:49:51 Color wheel filter change from 0 to 0 06:49:51 FLIGetFilterPos err=0 currentPosition=0 06:49:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:51 Filter is already there-color wheel unchanged 06:49:51 Received message from Master: op=Shutter serial=265984 06:49:51 Shutter LASER close 06:49:51 Received message from Camera: op=State serial=265986 06:49:51 GetSingleValue result=40 Value=cccccccc 06:49:51 SkyScan query 06:49:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:49:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:52 Parameters OK 06:49:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:52 Set A/D data flow result=40 06:49:52 Set A/D channel type result=40 06:49:52 Set A/D encoding result=40 06:49:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:52 Set channel filter=0.000000e+000 result=40 06:49:52 Config A/D Result=40 06:49:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:52 Get A/D filter: -9.255963e+061 result=40 06:49:52 Get A/D value=-858993460 result=40 06:49:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:52 Parameters OK 06:49:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:52 Set A/D data flow result=40 06:49:52 Set A/D channel type result=40 06:49:52 Set A/D encoding result=40 06:49:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:52 Set channel filter=0.000000e+000 result=40 06:49:52 Config A/D Result=40 06:49:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:52 Get A/D filter: -9.255963e+061 result=40 06:49:52 Get A/D value=-858993460 result=40 06:49:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:52 Aux= 06:49:52 Message to Camera, serial 265986 queued 06:50:29 Received message from Master: op=PointingHead serial=265999 06:50:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:50:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:50:29 Point started: ret=0 06:50:29 point_skyscan result=0 06:50:30 Check angles 06:50:30 SkyScan query 06:50:31 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.315<-13421 Statuses=0009 0009 06:50:31 Msec=0 True Az=152.715 Ze=-21.315 Az status=0009 Ze status=0009 06:50:31 Check angles 06:50:31 SkyScan query 06:50:31 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.345<-12023 Statuses=0009 0009 06:50:31 Msec=750 True Az=135.135 Ze=-0.345 Az status=0009 Ze status=0009 06:50:31 Check angles 06:50:31 SkyScan query 06:50:32 SkyScan query done: ret=0 az=117.63<-7842 ze=20.685<-10621 Statuses=0009 0009 06:50:32 Msec=1500 True Az=117.63 Ze=20.685 Az status=0009 Ze status=0009 06:50:32 Check angles 06:50:32 SkyScan query 06:50:33 SkyScan query done: ret=0 az=100.32<-6688 ze=41.55<-9230 Statuses=0009 0009 06:50:33 Msec=2250 True Az=100.32 Ze=41.55 Az status=0009 Ze status=0009 06:50:33 Check angles 06:50:33 SkyScan query 06:50:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 06:50:34 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 06:50:34 Check angles 06:50:34 SkyScan query 06:50:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:50:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:50:34 Message to Master queued w/err=0: serial=265999 error=0 06:50:39 Received message from Master: op=Filter serial=266000 06:50:39 Color wheel filter change from 0 to 0 06:50:39 FLIGetFilterPos err=0 currentPosition=0 06:50:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:39 Filter is already there-color wheel unchanged 06:50:39 Received message from Master: op=Shutter serial=266001 06:50:39 Shutter LASER close 06:50:39 Received message from Camera: op=State serial=266003 06:50:39 GetSingleValue result=40 Value=cccccccc 06:50:39 SkyScan query 06:50:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:50:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:40 Parameters OK 06:50:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:40 Set A/D data flow result=40 06:50:40 Set A/D channel type result=40 06:50:40 Set A/D encoding result=40 06:50:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:40 Set channel filter=0.000000e+000 result=40 06:50:40 Config A/D Result=40 06:50:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:40 Get A/D filter: -9.255963e+061 result=40 06:50:40 Get A/D value=-858993460 result=40 06:50:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:40 Parameters OK 06:50:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:40 Set A/D data flow result=40 06:50:40 Set A/D channel type result=40 06:50:40 Set A/D encoding result=40 06:50:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:40 Set channel filter=0.000000e+000 result=40 06:50:40 Config A/D Result=40 06:50:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:40 Get A/D filter: -9.255963e+061 result=40 06:50:40 Get A/D value=-858993460 result=40 06:50:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:40 Aux= 06:50:40 Message to Camera, serial 266003 queued 06:51:17 Received message from Master: op=PointingHead serial=266016 06:51:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:51:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:51:17 Point started: ret=0 06:51:17 point_skyscan result=0 06:51:18 Check angles 06:51:18 SkyScan query 06:51:19 SkyScan query done: ret=0 az=85.995<-5733 ze=21.36<-10576 Statuses=0008 0009 06:51:19 Msec=0 True Az=85.995 Ze=21.36 Az status=0008 Ze status=0009 06:51:19 Check angles 06:51:19 SkyScan query 06:51:19 SkyScan query done: ret=0 az=86.01<-5734 ze=0.45<-11970 Statuses=0008 0009 06:51:19 Msec=750 True Az=86.01 Ze=0.45 Az status=0008 Ze status=0009 06:51:20 Check angles 06:51:20 SkyScan query 06:51:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.55<-13370 Statuses=0008 0009 06:51:20 Msec=1500 True Az=85.995 Ze=-20.55 Az status=0008 Ze status=0009 06:51:20 Check angles 06:51:20 SkyScan query 06:51:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.43<-14762 Statuses=0008 0009 06:51:21 Msec=2250 True Az=85.995 Ze=-41.43 Az status=0008 Ze status=0009 06:51:21 Check angles 06:51:21 SkyScan query 06:51:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:51:22 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:51:22 Message to Master queued w/err=0: serial=266016 error=0 06:51:27 Received message from Master: op=Filter serial=266017 06:51:27 Color wheel filter change from 0 to 0 06:51:27 FLIGetFilterPos err=0 currentPosition=0 06:51:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:27 Filter is already there-color wheel unchanged 06:51:27 Received message from Master: op=Shutter serial=266018 06:51:27 Shutter LASER close 06:51:27 Received message from Camera: op=State serial=266020 06:51:27 GetSingleValue result=40 Value=cccccccc 06:51:27 SkyScan query 06:51:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:51:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:28 Parameters OK 06:51:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:28 Set A/D data flow result=40 06:51:28 Set A/D channel type result=40 06:51:28 Set A/D encoding result=40 06:51:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:28 Set channel filter=0.000000e+000 result=40 06:51:28 Config A/D Result=40 06:51:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:28 Get A/D filter: -9.255963e+061 result=40 06:51:28 Get A/D value=-858993460 result=40 06:51:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:28 Parameters OK 06:51:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:28 Set A/D data flow result=40 06:51:28 Set A/D channel type result=40 06:51:28 Set A/D encoding result=40 06:51:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:28 Set channel filter=0.000000e+000 result=40 06:51:28 Config A/D Result=40 06:51:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:28 Get A/D filter: -9.255963e+061 result=40 06:51:28 Get A/D value=-858993460 result=40 06:51:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:28 Aux= 06:51:28 Message to Camera, serial 266020 queued 06:52:04 Received message from Master: op=PointingHead serial=266033 06:52:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:52:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:52:05 Point started: ret=0 06:52:05 point_skyscan result=0 06:52:05 Check angles 06:52:05 SkyScan query 06:52:06 SkyScan query done: ret=0 az=108.825<-7255 ze=-80.985<-17399 Statuses=0009 0009 06:52:06 Msec=0 True Az=108.825 Ze=-80.985 Az status=0009 Ze status=0009 06:52:06 Check angles 06:52:06 SkyScan query 06:52:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 06:52:07 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 06:52:07 Check angles 06:52:07 SkyScan query 06:52:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.81<-20254 Statuses=0008 0009 06:52:08 Msec=1500 True Az=112.995 Ze=-123.81 Az status=0008 Ze status=0009 06:52:08 Check angles 06:52:08 SkyScan query 06:52:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 06:52:08 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 06:52:08 Check angles 06:52:08 SkyScan query 06:52:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.675<-23045 Statuses=0008 0009 06:52:09 Msec=3000 True Az=112.995 Ze=-165.675 Az status=0008 Ze status=0009 06:52:09 Check angles 06:52:09 SkyScan query 06:52:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:52:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:52:10 Message to Master queued w/err=0: serial=266033 error=0 06:52:15 Received message from Master: op=Filter serial=266034 06:52:15 Color wheel filter change from 0 to 0 06:52:15 FLIGetFilterPos err=0 currentPosition=0 06:52:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:15 Filter is already there-color wheel unchanged 06:52:15 Received message from Master: op=Shutter serial=266035 06:52:15 Shutter LASER open 06:52:15 Received message from Camera: op=State serial=266037 06:52:15 GetSingleValue result=40 Value=cccccccc 06:52:15 SkyScan query 06:52:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:52:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:16 Parameters OK 06:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:16 Set A/D data flow result=40 06:52:16 Set A/D channel type result=40 06:52:16 Set A/D encoding result=40 06:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:16 Set channel filter=0.000000e+000 result=40 06:52:16 Config A/D Result=40 06:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:16 Get A/D filter: -9.255963e+061 result=40 06:52:16 Get A/D value=-858993460 result=40 06:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:16 Parameters OK 06:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:16 Set A/D data flow result=40 06:52:16 Set A/D channel type result=40 06:52:16 Set A/D encoding result=40 06:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:16 Set channel filter=0.000000e+000 result=40 06:52:16 Config A/D Result=40 06:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:16 Get A/D filter: -9.255963e+061 result=40 06:52:16 Get A/D value=-858993460 result=40 06:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:16 Aux= 06:52:16 Message to Camera, serial 266037 queued 06:52:24 Received message from Master: op=Shutter serial=266047 06:52:24 Shutter LASER close 06:52:25 Received message from Master: op=PointingHead serial=266051 06:52:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:52:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:52:25 Point started: ret=0 06:52:25 point_skyscan result=0 06:52:26 Check angles 06:52:26 SkyScan query 06:52:26 SkyScan query done: ret=0 az=89.865<-5991 ze=157.305<-1513 Statuses=0009 0009 06:52:26 Msec=0 True Az=89.865 Ze=157.305 Az status=0009 Ze status=0009 06:52:26 Check angles 06:52:26 SkyScan query 06:52:27 SkyScan query done: ret=0 az=72.315<-4821 ze=136.35<-2910 Statuses=0009 0009 06:52:27 Msec=750 True Az=72.315 Ze=136.35 Az status=0009 Ze status=0009 06:52:27 Check angles 06:52:27 SkyScan query 06:52:28 SkyScan query done: ret=0 az=54.96<-3664 ze=115.425<-4305 Statuses=0009 0009 06:52:28 Msec=1500 True Az=54.96 Ze=115.425 Az status=0009 Ze status=0009 06:52:28 Check angles 06:52:28 SkyScan query 06:52:29 SkyScan query done: ret=0 az=41.01<-2734 ze=94.44<-5704 Statuses=0009 0009 06:52:29 Msec=2250 True Az=41.01 Ze=94.44 Az status=0009 Ze status=0009 06:52:29 Check angles 06:52:29 SkyScan query 06:52:29 SkyScan query done: ret=0 az=40.995<-2733 ze=73.47<-7102 Statuses=0008 0009 06:52:29 Msec=3000 True Az=40.995 Ze=73.47 Az status=0008 Ze status=0009 06:52:29 Check angles 06:52:29 SkyScan query 06:52:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.905<-8473 Statuses=0008 0009 06:52:30 Msec=3750 True Az=40.995 Ze=52.905 Az status=0008 Ze status=0009 06:52:30 Check angles 06:52:30 SkyScan query 06:52:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:52:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:52:31 Message to Master queued w/err=0: serial=266051 error=0 06:52:36 Received message from Master: op=Filter serial=266052 06:52:36 Color wheel filter change from 0 to 0 06:52:36 FLIGetFilterPos err=0 currentPosition=0 06:52:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:36 Filter is already there-color wheel unchanged 06:52:36 Received message from Master: op=Shutter serial=266053 06:52:36 Shutter LASER close 06:52:36 Received message from Camera: op=State serial=266055 06:52:36 GetSingleValue result=40 Value=cccccccc 06:52:36 SkyScan query 06:52:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:52:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:37 Parameters OK 06:52:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:37 Set A/D data flow result=40 06:52:37 Set A/D channel type result=40 06:52:37 Set A/D encoding result=40 06:52:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:37 Set channel filter=0.000000e+000 result=40 06:52:37 Config A/D Result=40 06:52:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:37 Get A/D filter: -9.255963e+061 result=40 06:52:37 Get A/D value=-858993460 result=40 06:52:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:37 Parameters OK 06:52:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:37 Set A/D data flow result=40 06:52:37 Set A/D channel type result=40 06:52:37 Set A/D encoding result=40 06:52:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:37 Set channel filter=0.000000e+000 result=40 06:52:37 Config A/D Result=40 06:52:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:37 Get A/D filter: -9.255963e+061 result=40 06:52:37 Get A/D value=-858993460 result=40 06:52:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:37 Aux= 06:52:37 Message to Camera, serial 266055 queued 06:53:14 Received message from Master: op=PointingHead serial=266068 06:53:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:53:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:53:14 Point started: ret=0 06:53:14 point_skyscan result=0 06:53:15 Check angles 06:53:15 SkyScan query 06:53:15 SkyScan query done: ret=0 az=63.945<-4263 ze=81.36<-6576 Statuses=0009 0009 06:53:15 Msec=0 True Az=63.945 Ze=81.36 Az status=0009 Ze status=0009 06:53:16 Check angles 06:53:16 SkyScan query 06:53:16 SkyScan query done: ret=0 az=81.465<-5431 ze=102.315<-5179 Statuses=0009 0009 06:53:16 Msec=750 True Az=81.465 Ze=102.315 Az status=0009 Ze status=0009 06:53:16 Check angles 06:53:16 SkyScan query 06:53:17 SkyScan query done: ret=0 az=99.375<-6625 ze=123.69<-3754 Statuses=0009 0009 06:53:17 Msec=1500 True Az=99.375 Ze=123.69 Az status=0009 Ze status=0009 06:53:17 Check angles 06:53:17 SkyScan query 06:53:18 SkyScan query done: ret=0 az=116.82<-7788 ze=144.615<-2359 Statuses=0009 0009 06:53:18 Msec=2250 True Az=116.82 Ze=144.615 Az status=0009 Ze status=0009 06:53:18 Check angles 06:53:18 SkyScan query 06:53:18 SkyScan query done: ret=0 az=130.995<-8733 ze=165.57<-962 Statuses=0009 0009 06:53:18 Msec=3000 True Az=130.995 Ze=165.57 Az status=0009 Ze status=0009 06:53:19 Check angles 06:53:19 SkyScan query 06:53:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.445<-23563 Statuses=0008 0009 06:53:19 Msec=3750 True Az=130.995 Ze=-173.445 Az status=0008 Ze status=0009 06:53:19 Check angles 06:53:19 SkyScan query 06:53:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.07<-22138 Statuses=0008 0009 06:53:20 Msec=4500 True Az=130.995 Ze=-152.07 Az status=0008 Ze status=0009 06:53:20 Check angles 06:53:20 SkyScan query 06:53:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:53:21 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:53:21 Message to Master queued w/err=0: serial=266068 error=0 06:53:26 Received message from Master: op=Filter serial=266069 06:53:26 Color wheel filter change from 0 to 0 06:53:26 FLIGetFilterPos err=0 currentPosition=0 06:53:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:26 Filter is already there-color wheel unchanged 06:53:26 Received message from Master: op=Shutter serial=266070 06:53:26 Shutter LASER close 06:53:26 Received message from Camera: op=State serial=266072 06:53:26 GetSingleValue result=40 Value=cccccccc 06:53:26 SkyScan query 06:53:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:53:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:27 Parameters OK 06:53:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:27 Set A/D data flow result=40 06:53:27 Set A/D channel type result=40 06:53:27 Set A/D encoding result=40 06:53:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:27 Set channel filter=0.000000e+000 result=40 06:53:27 Config A/D Result=40 06:53:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:27 Get A/D filter: -9.255963e+061 result=40 06:53:27 Get A/D value=-858993460 result=40 06:53:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:27 Parameters OK 06:53:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:27 Set A/D data flow result=40 06:53:27 Set A/D channel type result=40 06:53:27 Set A/D encoding result=40 06:53:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:27 Set channel filter=0.000000e+000 result=40 06:53:27 Config A/D Result=40 06:53:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:27 Get A/D filter: -9.255963e+061 result=40 06:53:27 Get A/D value=-858993460 result=40 06:53:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:27 Aux= 06:53:27 Message to Camera, serial 266072 queued 06:54:03 Received message from Master: op=PointingHead serial=266085 06:54:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:54:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:54:04 Point started: ret=0 06:54:04 point_skyscan result=0 06:54:05 Check angles 06:54:05 SkyScan query 06:54:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0009 0009 06:54:05 Msec=0 True Az=112.995 Ze=-170.955 Az status=0009 Ze status=0009 06:54:05 Check angles 06:54:05 SkyScan query 06:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:54:06 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:54:06 Message to Master queued w/err=0: serial=266085 error=0 06:54:11 Received message from Master: op=Filter serial=266086 06:54:11 Color wheel filter change from 0 to 0 06:54:11 FLIGetFilterPos err=0 currentPosition=0 06:54:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:11 Filter is already there-color wheel unchanged 06:54:11 Received message from Master: op=Shutter serial=266087 06:54:11 Shutter LASER open 06:54:11 Received message from Camera: op=State serial=266089 06:54:11 GetSingleValue result=40 Value=cccccccc 06:54:11 SkyScan query 06:54:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:54:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:12 Parameters OK 06:54:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:12 Set A/D data flow result=40 06:54:12 Set A/D channel type result=40 06:54:12 Set A/D encoding result=40 06:54:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:12 Set channel filter=0.000000e+000 result=40 06:54:12 Config A/D Result=40 06:54:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:12 Get A/D filter: -9.255963e+061 result=40 06:54:12 Get A/D value=-858993460 result=40 06:54:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:12 Parameters OK 06:54:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:12 Set A/D data flow result=40 06:54:12 Set A/D channel type result=40 06:54:12 Set A/D encoding result=40 06:54:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:12 Set channel filter=0.000000e+000 result=40 06:54:12 Config A/D Result=40 06:54:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:12 Get A/D filter: -9.255963e+061 result=40 06:54:12 Get A/D value=-858993460 result=40 06:54:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:12 Aux= 06:54:12 Message to Camera, serial 266089 queued 06:54:20 Received message from Master: op=Shutter serial=266099 06:54:20 Shutter LASER close 06:54:21 Received message from Master: op=PointingHead serial=266103 06:54:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:54:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:54:21 Point started: ret=0 06:54:21 point_skyscan result=0 06:54:22 Check angles 06:54:22 SkyScan query 06:54:22 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.055<-21537 Statuses=0009 0009 06:54:22 Msec=0 True Az=136.185 Ze=-143.055 Az status=0009 Ze status=0009 06:54:23 Check angles 06:54:23 SkyScan query 06:54:23 SkyScan query done: ret=0 az=153.675<-10245 ze=-122.055<-20137 Statuses=0009 0009 06:54:23 Msec=750 True Az=153.675 Ze=-122.055 Az status=0009 Ze status=0009 06:54:23 Check angles 06:54:23 SkyScan query 06:54:24 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.145<-18743 Statuses=0009 0009 06:54:24 Msec=1500 True Az=171.24 Ze=-101.145 Az status=0009 Ze status=0009 06:54:24 Check angles 06:54:24 SkyScan query 06:54:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.205<-17347 Statuses=0008 0009 06:54:25 Msec=2250 True Az=175.995 Ze=-80.205 Az status=0008 Ze status=0009 06:54:25 Check angles 06:54:25 SkyScan query 06:54:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.205<-15947 Statuses=0008 0009 06:54:25 Msec=3000 True Az=175.995 Ze=-59.205 Az status=0008 Ze status=0009 06:54:26 Check angles 06:54:26 SkyScan query 06:54:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:54:26 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:54:26 Message to Master queued w/err=0: serial=266103 error=0 06:54:31 Received message from Master: op=Filter serial=266104 06:54:31 Color wheel filter change from 0 to 0 06:54:31 FLIGetFilterPos err=0 currentPosition=0 06:54:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:31 Filter is already there-color wheel unchanged 06:54:31 Received message from Master: op=Shutter serial=266105 06:54:31 Shutter LASER close 06:54:32 Received message from Camera: op=State serial=266107 06:54:32 GetSingleValue result=40 Value=cccccccc 06:54:32 SkyScan query 06:54:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:54:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:32 Parameters OK 06:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:32 Set A/D data flow result=40 06:54:32 Set A/D channel type result=40 06:54:32 Set A/D encoding result=40 06:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:32 Set channel filter=0.000000e+000 result=40 06:54:32 Config A/D Result=40 06:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:32 Get A/D filter: -9.255963e+061 result=40 06:54:32 Get A/D value=-858993460 result=40 06:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 [UTC 2018-12-19 06:54:32] 06:54:32 Parameters OK 06:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:32 Set A/D data flow result=40 06:54:32 Set A/D channel type result=40 06:54:32 Set A/D encoding result=40 06:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:32 Set channel filter=0.000000e+000 result=40 06:54:32 Config A/D Result=40 06:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:32 Get A/D filter: -9.255963e+061 result=40 06:54:32 Get A/D value=-858993460 result=40 06:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:32 Aux= 06:54:32 Message to Camera, serial 266107 queued 06:55:09 Received message from Master: op=PointingHead serial=266120 06:55:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:55:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:55:09 Point started: ret=0 06:55:09 point_skyscan result=0 06:55:10 Check angles 06:55:10 SkyScan query 06:55:11 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.065<-13471 Statuses=0009 0009 06:55:11 Msec=0 True Az=153.225 Ze=-22.065 Az status=0009 Ze status=0009 06:55:11 Check angles 06:55:11 SkyScan query 06:55:11 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.035<-12069 Statuses=0009 0009 06:55:11 Msec=750 True Az=135.78 Ze=-1.035 Az status=0009 Ze status=0009 06:55:12 Check angles 06:55:12 SkyScan query 06:55:12 SkyScan query done: ret=0 az=118.26<-7884 ze=19.86<-10676 Statuses=0009 0009 06:55:12 Msec=1500 True Az=118.26 Ze=19.86 Az status=0009 Ze status=0009 06:55:12 Check angles 06:55:12 SkyScan query 06:55:13 SkyScan query done: ret=0 az=100.86<-6724 ze=40.875<-9275 Statuses=0009 0009 06:55:13 Msec=2250 True Az=100.86 Ze=40.875 Az status=0009 Ze status=0009 06:55:13 Check angles 06:55:13 SkyScan query 06:55:14 SkyScan query done: ret=0 az=85.965<-5731 ze=51.57<-8562 Statuses=0009 0008 06:55:14 Msec=3000 True Az=85.965 Ze=51.57 Az status=0009 Ze status=0008 06:55:14 Check angles 06:55:14 SkyScan query 06:55:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:55:14 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:55:14 Message to Master queued w/err=0: serial=266120 error=0 06:55:19 Received message from Master: op=Filter serial=266121 06:55:19 Color wheel filter change from 0 to 0 06:55:19 FLIGetFilterPos err=0 currentPosition=0 06:55:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:19 Filter is already there-color wheel unchanged 06:55:20 Received message from Master: op=Shutter serial=266122 06:55:20 Shutter LASER close 06:55:20 Received message from Camera: op=State serial=266124 06:55:20 GetSingleValue result=40 Value=cccccccc 06:55:20 SkyScan query 06:55:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:55:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:20 Parameters OK 06:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:20 Set A/D data flow result=40 06:55:20 Set A/D channel type result=40 06:55:20 Set A/D encoding result=40 06:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:20 Set channel filter=0.000000e+000 result=40 06:55:20 Config A/D Result=40 06:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:20 Get A/D filter: -9.255963e+061 result=40 06:55:20 Get A/D value=-858993460 result=40 06:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:20 Parameters OK 06:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:20 Set A/D data flow result=40 06:55:20 Set A/D channel type result=40 06:55:20 Set A/D encoding result=40 06:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:20 Set channel filter=0.000000e+000 result=40 06:55:20 Config A/D Result=40 06:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:20 Get A/D filter: -9.255963e+061 result=40 06:55:20 Get A/D value=-858993460 result=40 06:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:20 Aux= 06:55:20 Message to Camera, serial 266124 queued [UTC 2018-12-19 06:55:52] 06:55:57 Received message from Master: op=PointingHead serial=266137 06:55:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:55:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:55:58 Point started: ret=0 06:55:58 point_skyscan result=0 06:55:58 Check angles 06:55:58 SkyScan query 06:55:59 SkyScan query done: ret=0 az=85.995<-5733 ze=21.72<-10552 Statuses=0008 0009 06:55:59 Msec=0 True Az=85.995 Ze=21.72 Az status=0008 Ze status=0009 06:55:59 Check angles 06:55:59 SkyScan query 06:56:00 SkyScan query done: ret=0 az=86.01<-5734 ze=0.36<-11976 Statuses=0008 0009 06:56:00 Msec=750 True Az=86.01 Ze=0.36 Az status=0008 Ze status=0009 06:56:00 Check angles 06:56:00 SkyScan query 06:56:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.61<-13374 Statuses=0008 0009 06:56:00 Msec=1500 True Az=85.995 Ze=-20.61 Az status=0008 Ze status=0009 06:56:01 Check angles 06:56:01 SkyScan query 06:56:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.52<-14768 Statuses=0008 0009 06:56:01 Msec=2250 True Az=85.995 Ze=-41.52 Az status=0008 Ze status=0009 06:56:01 Check angles 06:56:01 SkyScan query 06:56:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 06:56:02 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 06:56:02 Message to Master queued w/err=0: serial=266137 error=0 06:56:07 Received message from Master: op=Filter serial=266138 06:56:07 Color wheel filter change from 0 to 0 06:56:07 FLIGetFilterPos err=0 currentPosition=0 06:56:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:07 Filter is already there-color wheel unchanged 06:56:07 Received message from Master: op=Shutter serial=266139 06:56:07 Shutter LASER close 06:56:07 Received message from Camera: op=State serial=266141 06:56:07 GetSingleValue result=40 Value=cccccccc 06:56:07 SkyScan query 06:56:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:56:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:08 Parameters OK 06:56:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:08 Set A/D data flow result=40 06:56:08 Set A/D channel type result=40 06:56:08 Set A/D encoding result=40 06:56:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:08 Set channel filter=0.000000e+000 result=40 06:56:08 Config A/D Result=40 06:56:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:08 Get A/D filter: -9.255963e+061 result=40 06:56:08 Get A/D value=-858993460 result=40 06:56:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:08 Parameters OK 06:56:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:08 Set A/D data flow result=40 06:56:08 Set A/D channel type result=40 06:56:08 Set A/D encoding result=40 06:56:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:08 Set channel filter=0.000000e+000 result=40 06:56:08 Config A/D Result=40 06:56:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:08 Get A/D filter: -9.255963e+061 result=40 06:56:08 Get A/D value=-858993460 result=40 06:56:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:08 Aux= 06:56:08 Message to Camera, serial 266141 queued 06:56:45 Received message from Master: op=PointingHead serial=266154 06:56:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:56:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:56:45 Point started: ret=0 06:56:45 point_skyscan result=0 06:56:46 Check angles 06:56:46 SkyScan query 06:56:46 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.45<-17430 Statuses=0009 0009 06:56:46 Msec=0 True Az=109.215 Ze=-81.45 Az status=0009 Ze status=0009 06:56:46 Check angles 06:56:46 SkyScan query 06:56:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 06:56:47 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 06:56:47 Check angles 06:56:47 SkyScan query 06:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.765<-20251 Statuses=0008 0009 06:56:48 Msec=1500 True Az=112.995 Ze=-123.765 Az status=0008 Ze status=0009 06:56:48 Check angles 06:56:48 SkyScan query 06:56:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 06:56:49 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 06:56:49 Check angles 06:56:49 SkyScan query 06:56:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.63<-23042 Statuses=0008 0009 06:56:49 Msec=3000 True Az=112.995 Ze=-165.63 Az status=0008 Ze status=0009 06:56:49 Check angles 06:56:49 SkyScan query 06:56:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:56:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:56:50 Message to Master queued w/err=0: serial=266154 error=0 06:56:55 Received message from Master: op=Filter serial=266155 06:56:55 Color wheel filter change from 0 to 0 06:56:55 FLIGetFilterPos err=0 currentPosition=0 06:56:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:55 Filter is already there-color wheel unchanged 06:56:55 Received message from Master: op=Shutter serial=266156 06:56:55 Shutter LASER open 06:56:55 Received message from Camera: op=State serial=266158 06:56:55 GetSingleValue result=40 Value=cccccccc 06:56:55 SkyScan query 06:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:56:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:56 Parameters OK 06:56:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:56 Set A/D data flow result=40 06:56:56 Set A/D channel type result=40 06:56:56 Set A/D encoding result=40 06:56:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:56 Set channel filter=0.000000e+000 result=40 06:56:56 Config A/D Result=40 06:56:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:56 Get A/D filter: -9.255963e+061 result=40 06:56:56 Get A/D value=-858993460 result=40 06:56:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:56 Parameters OK 06:56:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:56 Set A/D data flow result=40 06:56:56 Set A/D channel type result=40 06:56:56 Set A/D encoding result=40 06:56:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:56 Set channel filter=0.000000e+000 result=40 06:56:56 Config A/D Result=40 06:56:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:56 Get A/D filter: -9.255963e+061 result=40 06:56:56 Get A/D value=-858993460 result=40 06:56:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:56 Aux= 06:56:56 Message to Camera, serial 266158 queued 06:57:04 Received message from Master: op=Shutter serial=266168 06:57:04 Shutter LASER close 06:57:05 Received message from Master: op=PointingHead serial=266172 06:57:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:57:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:57:05 Point started: ret=0 06:57:05 point_skyscan result=0 06:57:06 Check angles 06:57:06 SkyScan query 06:57:07 SkyScan query done: ret=0 az=90.03<-6002 ze=157.245<-1517 Statuses=0009 0009 06:57:07 Msec=0 True Az=90.03 Ze=157.245 Az status=0009 Ze status=0009 06:57:07 Check angles 06:57:07 SkyScan query 06:57:07 SkyScan query done: ret=0 az=72.525<-4835 ze=136.305<-2913 Statuses=0009 0009 06:57:07 Msec=750 True Az=72.525 Ze=136.305 Az status=0009 Ze status=0009 06:57:07 Check angles 06:57:07 SkyScan query 06:57:08 SkyScan query done: ret=0 az=55.125<-3675 ze=115.35<-4310 Statuses=0009 0009 06:57:08 Msec=1500 True Az=55.125 Ze=115.35 Az status=0009 Ze status=0009 06:57:08 Check angles 06:57:08 SkyScan query 06:57:09 SkyScan query done: ret=0 az=41.01<-2734 ze=94.395<-5707 Statuses=0009 0009 06:57:09 Msec=2250 True Az=41.01 Ze=94.395 Az status=0009 Ze status=0009 06:57:09 Check angles 06:57:09 SkyScan query 06:57:10 SkyScan query done: ret=0 az=40.995<-2733 ze=73.41<-7106 Statuses=0008 0009 06:57:10 Msec=3000 True Az=40.995 Ze=73.41 Az status=0008 Ze status=0009 06:57:10 Check angles 06:57:10 SkyScan query 06:57:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 06:57:10 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 06:57:10 Check angles 06:57:10 SkyScan query 06:57:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:57:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:57:11 Message to Master queued w/err=0: serial=266172 error=0 06:57:16 Received message from Master: op=Filter serial=266173 06:57:16 Color wheel filter change from 0 to 0 06:57:16 FLIGetFilterPos err=0 currentPosition=0 06:57:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:16 Filter is already there-color wheel unchanged 06:57:16 Received message from Master: op=Shutter serial=266174 06:57:16 Shutter LASER close 06:57:16 Received message from Camera: op=State serial=266176 06:57:16 GetSingleValue result=40 Value=cccccccc 06:57:16 SkyScan query 06:57:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:57:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:17 Parameters OK 06:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:17 Set A/D data flow result=40 06:57:17 Set A/D channel type result=40 06:57:17 Set A/D encoding result=40 06:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:17 Set channel filter=0.000000e+000 result=40 06:57:17 Config A/D Result=40 06:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:17 Get A/D filter: -9.255963e+061 result=40 06:57:17 Get A/D value=-858993460 result=40 06:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:17 Parameters OK 06:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:17 Set A/D data flow result=40 06:57:17 Set A/D channel type result=40 06:57:17 Set A/D encoding result=40 06:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:17 Set channel filter=0.000000e+000 result=40 06:57:17 Config A/D Result=40 06:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:17 Get A/D filter: -9.255963e+061 result=40 06:57:17 Get A/D value=-858993460 result=40 06:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:17 Aux= 06:57:17 Message to Camera, serial 266176 queued 06:57:54 Received message from Master: op=PointingHead serial=266189 06:57:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:57:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:57:54 Point started: ret=0 06:57:54 point_skyscan result=0 06:57:55 Check angles 06:57:55 SkyScan query 06:57:56 SkyScan query done: ret=0 az=63.855<-4257 ze=81.195<-6587 Statuses=0009 0009 06:57:56 Msec=0 True Az=63.855 Ze=81.195 Az status=0009 Ze status=0009 06:57:56 Check angles 06:57:56 SkyScan query 06:57:57 SkyScan query done: ret=0 az=81.345<-5423 ze=102.165<-5189 Statuses=0009 0009 06:57:57 Msec=750 True Az=81.345 Ze=102.165 Az status=0009 Ze status=0009 06:57:57 Check angles 06:57:57 SkyScan query 06:57:57 SkyScan query done: ret=0 az=99.15<-6610 ze=123.525<-3765 Statuses=0009 0009 06:57:57 Msec=1500 True Az=99.15 Ze=123.525 Az status=0009 Ze status=0009 06:57:57 Check angles 06:57:57 SkyScan query 06:57:58 SkyScan query done: ret=0 az=116.595<-7773 ze=144.465<-2369 Statuses=0009 0009 06:57:58 Msec=2250 True Az=116.595 Ze=144.465 Az status=0009 Ze status=0009 06:57:58 Check angles 06:57:58 SkyScan query 06:57:59 SkyScan query done: ret=0 az=131.01<-8734 ze=165.885<-941 Statuses=0009 0009 06:57:59 Msec=3000 True Az=131.01 Ze=165.885 Az status=0009 Ze status=0009 06:57:59 Check angles 06:57:59 SkyScan query 06:58:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.13<-23542 Statuses=0008 0009 06:58:00 Msec=3750 True Az=130.995 Ze=-173.13 Az status=0008 Ze status=0009 06:58:00 Check angles 06:58:00 SkyScan query 06:58:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.205<-22147 Statuses=0008 0009 06:58:00 Msec=4500 True Az=130.995 Ze=-152.205 Az status=0008 Ze status=0009 06:58:01 Check angles 06:58:01 SkyScan query 06:58:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:58:01 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:58:01 Message to Master queued w/err=0: serial=266189 error=0 06:58:06 Received message from Master: op=Filter serial=266190 06:58:06 Color wheel filter change from 0 to 0 06:58:06 FLIGetFilterPos err=0 currentPosition=0 06:58:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:06 Filter is already there-color wheel unchanged 06:58:06 Received message from Master: op=Shutter serial=266191 06:58:06 Shutter LASER close 06:58:06 Received message from Camera: op=State serial=266193 06:58:06 GetSingleValue result=40 Value=cccccccc 06:58:06 SkyScan query 06:58:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:58:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:07 Parameters OK 06:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:07 Set A/D data flow result=40 06:58:07 Set A/D channel type result=40 06:58:07 Set A/D encoding result=40 06:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:07 Set channel filter=0.000000e+000 result=40 06:58:07 Config A/D Result=40 06:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:07 Get A/D filter: -9.255963e+061 result=40 06:58:07 Get A/D value=-858993460 result=40 06:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:07 Parameters OK 06:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:07 Set A/D data flow result=40 06:58:07 Set A/D channel type result=40 06:58:07 Set A/D encoding result=40 06:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:07 Set channel filter=0.000000e+000 result=40 06:58:07 Config A/D Result=40 06:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:07 Get A/D filter: -9.255963e+061 result=40 06:58:07 Get A/D value=-858993460 result=40 06:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:07 Aux= 06:58:07 Message to Camera, serial 266193 queued 06:58:44 Received message from Master: op=PointingHead serial=266206 06:58:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:58:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:58:44 Point started: ret=0 06:58:44 point_skyscan result=0 06:58:45 Check angles 06:58:45 SkyScan query 06:58:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 06:58:45 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 06:58:46 Check angles 06:58:46 SkyScan query 06:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:58:46 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:58:46 Message to Master queued w/err=0: serial=266206 error=0 06:58:51 Received message from Master: op=Filter serial=266207 06:58:51 Color wheel filter change from 0 to 0 06:58:51 FLIGetFilterPos err=0 currentPosition=0 06:58:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:51 Filter is already there-color wheel unchanged 06:58:51 Received message from Master: op=Shutter serial=266208 06:58:51 Shutter LASER open 06:58:51 Received message from Camera: op=State serial=266210 06:58:51 GetSingleValue result=40 Value=cccccccc 06:58:51 SkyScan query 06:58:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:58:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:52 Parameters OK 06:58:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:52 Set A/D data flow result=40 06:58:52 Set A/D channel type result=40 06:58:52 Set A/D encoding result=40 06:58:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:52 Set channel filter=0.000000e+000 result=40 06:58:52 Config A/D Result=40 06:58:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:52 Get A/D filter: -9.255963e+061 result=40 06:58:52 Get A/D value=-858993460 result=40 06:58:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:52 Parameters OK 06:58:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:52 Set A/D data flow result=40 06:58:52 Set A/D channel type result=40 06:58:52 Set A/D encoding result=40 06:58:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:52 Set channel filter=0.000000e+000 result=40 06:58:52 Config A/D Result=40 06:58:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:52 Get A/D filter: -9.255963e+061 result=40 06:58:52 Get A/D value=-858993460 result=40 06:58:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-173.009995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:52 Aux= 06:58:52 Message to Camera, serial 266210 queued 06:59:00 Received message from Master: op=Shutter serial=266220 06:59:00 Shutter LASER close 06:59:01 Received message from Master: op=PointingHead serial=266224 06:59:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:59:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:59:01 Point started: ret=0 06:59:01 point_skyscan result=0 06:59:02 Check angles 06:59:02 SkyScan query 06:59:03 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.535<-21569 Statuses=0009 0009 06:59:03 Msec=0 True Az=135.705 Ze=-143.535 Az status=0009 Ze status=0009 06:59:03 Check angles 06:59:03 SkyScan query 06:59:04 SkyScan query done: ret=0 az=153.255<-10217 ze=-122.565<-20171 Statuses=0009 0009 06:59:04 Msec=750 True Az=153.255 Ze=-122.565 Az status=0009 Ze status=0009 06:59:04 Check angles 06:59:04 SkyScan query 06:59:04 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.685<-18779 Statuses=0009 0009 06:59:04 Msec=1500 True Az=170.73 Ze=-101.685 Az status=0009 Ze status=0009 06:59:04 Check angles 06:59:04 SkyScan query 06:59:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.67<-17378 Statuses=0008 0009 06:59:05 Msec=2250 True Az=175.995 Ze=-80.67 Az status=0008 Ze status=0009 06:59:05 Check angles 06:59:05 SkyScan query 06:59:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.73<-15982 Statuses=0008 0009 06:59:06 Msec=3000 True Az=175.995 Ze=-59.73 Az status=0008 Ze status=0009 06:59:06 Check angles 06:59:06 SkyScan query 06:59:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:59:07 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:59:07 Message to Master queued w/err=0: serial=266224 error=0 06:59:12 Received message from Master: op=Filter serial=266225 06:59:12 Color wheel filter change from 0 to 0 06:59:12 FLIGetFilterPos err=0 currentPosition=0 06:59:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:12 Filter is already there-color wheel unchanged 06:59:12 Received message from Master: op=Shutter serial=266226 06:59:12 Shutter LASER close 06:59:12 Received message from Camera: op=State serial=266228 06:59:12 GetSingleValue result=40 Value=cccccccc 06:59:12 SkyScan query 06:59:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:59:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:12 Parameters OK 06:59:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:12 Set A/D data flow result=40 06:59:12 Set A/D channel type result=40 06:59:12 Set A/D encoding result=40 06:59:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:12 Set channel filter=0.000000e+000 result=40 06:59:12 Config A/D Result=40 06:59:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:12 Get A/D filter: -9.255963e+061 result=40 06:59:12 Get A/D value=-858993460 result=40 06:59:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:12 Parameters OK 06:59:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:12 Set A/D data flow result=40 06:59:12 Set A/D channel type result=40 06:59:12 Set A/D encoding result=40 06:59:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:12 Set channel filter=0.000000e+000 result=40 06:59:12 Config A/D Result=40 06:59:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:12 Get A/D filter: -9.255963e+061 result=40 06:59:12 Get A/D value=-858993460 result=40 06:59:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:12 Aux= 06:59:12 Message to Camera, serial 266228 queued 06:59:49 Received message from Master: op=PointingHead serial=266241 06:59:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:59:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:59:50 Point started: ret=0 06:59:50 point_skyscan result=0 06:59:50 Check angles 06:59:50 SkyScan query 06:59:51 SkyScan query done: ret=0 az=152.7<-10180 ze=-21.3<-13420 Statuses=0009 0009 06:59:51 Msec=0 True Az=152.7 Ze=-21.3 Az status=0009 Ze status=0009 06:59:51 Check angles 06:59:51 SkyScan query 06:59:52 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.33<-12022 Statuses=0009 0009 06:59:52 Msec=750 True Az=135.12 Ze=-0.33 Az status=0009 Ze status=0009 06:59:52 Check angles 06:59:52 SkyScan query 06:59:52 SkyScan query done: ret=0 az=117.735<-7849 ze=20.625<-10625 Statuses=0009 0009 06:59:52 Msec=1500 True Az=117.735 Ze=20.625 Az status=0009 Ze status=0009 06:59:53 Check angles 06:59:53 SkyScan query 06:59:53 SkyScan query done: ret=0 az=99.975<-6665 ze=41.985<-9201 Statuses=0009 0009 06:59:53 Msec=2250 True Az=99.975 Ze=41.985 Az status=0009 Ze status=0009 06:59:53 Check angles 06:59:53 SkyScan query 06:59:54 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 06:59:54 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 06:59:54 Check angles 06:59:54 SkyScan query 06:59:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:59:55 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:59:55 Message to Master queued w/err=0: serial=266241 error=0 07:00:00 Received message from Master: op=Filter serial=266242 07:00:00 Color wheel filter change from 0 to 0 07:00:00 FLIGetFilterPos err=0 currentPosition=0 07:00:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:00 Filter is already there-color wheel unchanged 07:00:00 Received message from Master: op=Shutter serial=266243 07:00:00 Shutter LASER close 07:00:00 Received message from Camera: op=State serial=266245 07:00:00 GetSingleValue result=40 Value=cccccccc 07:00:00 SkyScan query 07:00:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:00:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:00 Parameters OK 07:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:00 Set A/D data flow result=40 07:00:00 Set A/D channel type result=40 07:00:00 Set A/D encoding result=40 07:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:00 Set channel filter=0.000000e+000 result=40 07:00:00 Config A/D Result=40 07:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:00 Get A/D filter: -9.255963e+061 result=40 07:00:00 Get A/D value=-858993460 result=40 07:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:00 Parameters OK 07:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:00 Set A/D data flow result=40 07:00:00 Set A/D channel type result=40 07:00:00 Set A/D encoding result=40 07:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:00 Set channel filter=0.000000e+000 result=40 07:00:00 Config A/D Result=40 07:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:00 Get A/D filter: -9.255963e+061 result=40 07:00:00 Get A/D value=-858993460 result=40 07:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:00 Aux= 07:00:00 Message to Camera, serial 266245 queued 07:00:37 Received message from Master: op=PointingHead serial=266258 07:00:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:00:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:00:38 Point started: ret=0 07:00:38 point_skyscan result=0 07:00:39 Check angles 07:00:39 SkyScan query 07:00:39 SkyScan query done: ret=0 az=85.995<-5733 ze=21.75<-10550 Statuses=0008 0009 07:00:39 Msec=0 True Az=85.995 Ze=21.75 Az status=0008 Ze status=0009 07:00:39 Check angles 07:00:39 SkyScan query 07:00:40 SkyScan query done: ret=0 az=85.995<-5733 ze=0.885<-11941 Statuses=0008 0009 07:00:40 Msec=750 True Az=85.995 Ze=0.885 Az status=0008 Ze status=0009 07:00:40 Check angles 07:00:40 SkyScan query 07:00:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.1<-13340 Statuses=0008 0009 07:00:41 Msec=1500 True Az=85.995 Ze=-20.1 Az status=0008 Ze status=0009 07:00:41 Check angles 07:00:41 SkyScan query 07:00:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.01<-14734 Statuses=0008 0009 07:00:41 Msec=2250 True Az=85.995 Ze=-41.01 Az status=0008 Ze status=0009 07:00:42 Check angles 07:00:42 SkyScan query 07:00:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 07:00:42 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 07:00:42 Message to Master queued w/err=0: serial=266258 error=0 07:00:47 Received message from Master: op=Filter serial=266259 07:00:47 Color wheel filter change from 0 to 0 07:00:47 FLIGetFilterPos err=0 currentPosition=0 07:00:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:47 Filter is already there-color wheel unchanged 07:00:47 Received message from Master: op=Shutter serial=266260 07:00:47 Shutter LASER close 07:00:47 Received message from Camera: op=State serial=266262 07:00:47 GetSingleValue result=40 Value=cccccccc 07:00:47 SkyScan query 07:00:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:00:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:48 Parameters OK 07:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:48 Set A/D data flow result=40 07:00:48 Set A/D channel type result=40 07:00:48 Set A/D encoding result=40 07:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:48 Set channel filter=0.000000e+000 result=40 07:00:48 Config A/D Result=40 07:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:48 Get A/D filter: -9.255963e+061 result=40 07:00:48 Get A/D value=-858993460 result=40 07:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:48 Parameters OK 07:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:48 Set A/D data flow result=40 07:00:48 Set A/D channel type result=40 07:00:48 Set A/D encoding result=40 07:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:48 Set channel filter=0.000000e+000 result=40 07:00:48 Config A/D Result=40 07:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:48 Get A/D filter: -9.255963e+061 result=40 07:00:48 Get A/D value=-858993460 result=40 07:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:48 Aux= 07:00:48 Message to Camera, serial 266262 queued 07:01:25 Received message from Master: op=PointingHead serial=266275 07:01:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:01:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:01:25 Point started: ret=0 07:01:25 point_skyscan result=0 07:01:26 Check angles 07:01:26 SkyScan query 07:01:26 SkyScan query done: ret=0 az=108.735<-7249 ze=-80.955<-17397 Statuses=0009 0009 07:01:26 Msec=0 True Az=108.735 Ze=-80.955 Az status=0009 Ze status=0009 07:01:27 Check angles 07:01:27 SkyScan query 07:01:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.39<-18826 Statuses=0008 0009 07:01:27 Msec=750 True Az=112.995 Ze=-102.39 Az status=0008 Ze status=0009 07:01:27 Check angles 07:01:27 SkyScan query 07:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 07:01:28 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 07:01:28 Check angles 07:01:28 SkyScan query 07:01:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.27<-21618 Statuses=0008 0009 07:01:29 Msec=2250 True Az=112.995 Ze=-144.27 Az status=0008 Ze status=0009 07:01:29 Check angles 07:01:29 SkyScan query 07:01:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 07:01:29 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 07:01:30 Check angles 07:01:30 SkyScan query 07:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:01:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:01:30 Message to Master queued w/err=0: serial=266275 error=0 07:01:35 Received message from Master: op=Filter serial=266276 07:01:35 Color wheel filter change from 0 to 0 07:01:35 FLIGetFilterPos err=0 currentPosition=0 07:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:35 Filter is already there-color wheel unchanged 07:01:35 Received message from Master: op=Shutter serial=266277 07:01:35 Shutter LASER open 07:01:36 Received message from Camera: op=State serial=266279 07:01:36 GetSingleValue result=40 Value=cccccccc 07:01:36 SkyScan query 07:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:36 Parameters OK 07:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:36 Set A/D data flow result=40 07:01:36 Set A/D channel type result=40 07:01:36 Set A/D encoding result=40 07:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:36 Set channel filter=0.000000e+000 result=40 07:01:36 Config A/D Result=40 07:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:36 Get A/D filter: -9.255963e+061 result=40 07:01:36 Get A/D value=-858993460 result=40 07:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:36 Parameters OK 07:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:36 Set A/D data flow result=40 07:01:36 Set A/D channel type result=40 07:01:36 Set A/D encoding result=40 07:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:36 Set channel filter=0.000000e+000 result=40 07:01:36 Config A/D Result=40 07:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:36 Get A/D filter: -9.255963e+061 result=40 07:01:36 Get A/D value=-858993460 result=40 07:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:36 Aux= 07:01:36 Message to Camera, serial 266279 queued 07:01:45 Received message from Master: op=Shutter serial=266289 07:01:45 Shutter LASER close 07:01:45 Received message from Master: op=PointingHead serial=266293 07:01:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:01:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:01:45 Point started: ret=0 07:01:45 point_skyscan result=0 07:01:46 Check angles 07:01:46 SkyScan query 07:01:47 SkyScan query done: ret=0 az=90.225<-6015 ze=157.545<-1497 Statuses=0009 0009 07:01:47 Msec=0 True Az=90.225 Ze=157.545 Az status=0009 Ze status=0009 07:01:47 Check angles 07:01:47 SkyScan query 07:01:47 SkyScan query done: ret=0 az=72.24<-4816 ze=136.2<-2920 Statuses=0009 0009 07:01:47 Msec=750 True Az=72.24 Ze=136.2 Az status=0009 Ze status=0009 07:01:48 Check angles 07:01:48 SkyScan query 07:01:48 SkyScan query done: ret=0 az=54.48<-3632 ze=114.735<-4351 Statuses=0009 0009 07:01:48 Msec=1500 True Az=54.48 Ze=114.735 Az status=0009 Ze status=0009 07:01:48 Check angles 07:01:48 SkyScan query 07:01:49 SkyScan query done: ret=0 az=40.98<-2732 ze=93.84<-5744 Statuses=0009 0009 07:01:49 Msec=2250 True Az=40.98 Ze=93.84 Az status=0009 Ze status=0009 07:01:49 Check angles 07:01:49 SkyScan query 07:01:50 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 07:01:50 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 07:01:50 Check angles 07:01:50 SkyScan query 07:01:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.245<-8517 Statuses=0008 0009 07:01:50 Msec=3750 True Az=40.995 Ze=52.245 Az status=0008 Ze status=0009 07:01:51 Check angles 07:01:51 SkyScan query 07:01:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:01:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:01:51 Message to Master queued w/err=0: serial=266293 error=0 07:01:56 Received message from Master: op=Filter serial=266294 07:01:56 Color wheel filter change from 0 to 0 07:01:56 FLIGetFilterPos err=0 currentPosition=0 07:01:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:56 Filter is already there-color wheel unchanged 07:01:56 Received message from Master: op=Shutter serial=266295 07:01:56 Shutter LASER close 07:01:57 Received message from Camera: op=State serial=266297 07:01:57 GetSingleValue result=40 Value=cccccccc 07:01:57 SkyScan query 07:01:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:01:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:57 Parameters OK 07:01:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:57 Set A/D data flow result=40 07:01:57 Set A/D channel type result=40 07:01:57 Set A/D encoding result=40 07:01:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:57 Set channel filter=0.000000e+000 result=40 07:01:57 Config A/D Result=40 07:01:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:57 Get A/D filter: -9.255963e+061 result=40 07:01:57 Get A/D value=-858993460 result=40 07:01:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:57 Parameters OK 07:01:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:57 Set A/D data flow result=40 07:01:57 Set A/D channel type result=40 07:01:57 Set A/D encoding result=40 07:01:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:57 Set channel filter=0.000000e+000 result=40 07:01:57 Config A/D Result=40 07:01:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:57 Get A/D filter: -9.255963e+061 result=40 07:01:57 Get A/D value=-858993460 result=40 07:01:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:57 Aux= 07:01:57 Message to Camera, serial 266297 queued 07:02:34 Received message from Master: op=PointingHead serial=266310 07:02:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:02:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:02:35 Point started: ret=0 07:02:35 point_skyscan result=0 07:02:35 Check angles 07:02:35 SkyScan query 07:02:36 SkyScan query done: ret=0 az=63.84<-4256 ze=81.27<-6582 Statuses=0009 0009 07:02:36 Msec=0 True Az=63.84 Ze=81.27 Az status=0009 Ze status=0009 07:02:36 Check angles 07:02:36 SkyScan query 07:02:37 SkyScan query done: ret=0 az=81.27<-5418 ze=102.225<-5185 Statuses=0009 0009 07:02:37 Msec=750 True Az=81.27 Ze=102.225 Az status=0009 Ze status=0009 07:02:37 Check angles 07:02:37 SkyScan query 07:02:37 SkyScan query done: ret=0 az=99.21<-6614 ze=123.585<-3761 Statuses=0009 0009 07:02:37 Msec=1500 True Az=99.21 Ze=123.585 Az status=0009 Ze status=0009 07:02:38 Check angles 07:02:38 SkyScan query 07:02:38 SkyScan query done: ret=0 az=116.595<-7773 ze=144.54<-2364 Statuses=0009 0009 07:02:38 Msec=2250 True Az=116.595 Ze=144.54 Az status=0009 Ze status=0009 07:02:38 Check angles 07:02:38 SkyScan query 07:02:39 SkyScan query done: ret=0 az=130.995<-8733 ze=165.51<-966 Statuses=0009 0009 07:02:39 Msec=3000 True Az=130.995 Ze=165.51 Az status=0009 Ze status=0009 07:02:39 Check angles 07:02:39 SkyScan query 07:02:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.535<-23569 Statuses=0008 0009 07:02:40 Msec=3750 True Az=130.995 Ze=-173.535 Az status=0008 Ze status=0009 07:02:40 Check angles 07:02:40 SkyScan query 07:02:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.145<-22143 Statuses=0008 0009 07:02:41 Msec=4500 True Az=130.995 Ze=-152.145 Az status=0008 Ze status=0009 07:02:41 Check angles 07:02:41 SkyScan query 07:02:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 07:02:41 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 07:02:41 Message to Master queued w/err=0: serial=266310 error=0 07:02:46 Received message from Master: op=Filter serial=266311 07:02:46 Color wheel filter change from 0 to 0 07:02:46 FLIGetFilterPos err=0 currentPosition=0 07:02:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:46 Filter is already there-color wheel unchanged 07:02:46 Received message from Master: op=Shutter serial=266312 07:02:46 Shutter LASER close 07:02:46 Received message from Camera: op=State serial=266314 07:02:46 GetSingleValue result=40 Value=cccccccc 07:02:46 SkyScan query 07:02:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:02:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:47 Parameters OK 07:02:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:47 Set A/D data flow result=40 07:02:47 Set A/D channel type result=40 07:02:47 Set A/D encoding result=40 07:02:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:47 Set channel filter=0.000000e+000 result=40 07:02:47 Config A/D Result=40 07:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:47 Get A/D filter: -9.255963e+061 result=40 07:02:47 Get A/D value=-858993460 result=40 07:02:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:47 Parameters OK 07:02:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:47 Set A/D data flow result=40 07:02:47 Set A/D channel type result=40 07:02:47 Set A/D encoding result=40 07:02:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:47 Set channel filter=0.000000e+000 result=40 07:02:47 Config A/D Result=40 07:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:47 Get A/D filter: -9.255963e+061 result=40 07:02:47 Get A/D value=-858993460 result=40 07:02:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:47 Aux= 07:02:47 Message to Camera, serial 266314 queued 07:03:24 Received message from Master: op=PointingHead serial=266327 07:03:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:03:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:03:24 Point started: ret=0 07:03:24 point_skyscan result=0 07:03:25 Check angles 07:03:25 SkyScan query 07:03:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0009 0009 07:03:26 Msec=0 True Az=112.995 Ze=-170.955 Az status=0009 Ze status=0009 07:03:26 Check angles 07:03:26 SkyScan query 07:03:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:03:26 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:03:26 Message to Master queued w/err=0: serial=266327 error=0 07:03:31 Received message from Master: op=Filter serial=266328 07:03:31 Color wheel filter change from 0 to 0 07:03:31 FLIGetFilterPos err=0 currentPosition=0 07:03:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:31 Filter is already there-color wheel unchanged 07:03:31 Received message from Master: op=Shutter serial=266329 07:03:31 Shutter LASER open 07:03:32 Received message from Camera: op=State serial=266331 07:03:32 GetSingleValue result=40 Value=cccccccc 07:03:32 SkyScan query 07:03:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:03:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:32 Parameters OK 07:03:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:32 Set A/D data flow result=40 07:03:32 Set A/D channel type result=40 07:03:32 Set A/D encoding result=40 07:03:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:32 Set channel filter=0.000000e+000 result=40 07:03:32 Config A/D Result=40 07:03:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:32 Get A/D filter: -9.255963e+061 result=40 07:03:32 Get A/D value=-858993460 result=40 07:03:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:32 Parameters OK 07:03:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:32 Set A/D data flow result=40 07:03:32 Set A/D channel type result=40 07:03:32 Set A/D encoding result=40 07:03:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:32 Set channel filter=0.000000e+000 result=40 07:03:32 Config A/D Result=40 07:03:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:32 Get A/D filter: -9.255963e+061 result=40 07:03:32 Get A/D value=-858993460 result=40 07:03:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-173.009995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:32 Aux= 07:03:32 Message to Camera, serial 266331 queued 07:03:41 Received message from Master: op=Shutter serial=266341 07:03:41 Shutter LASER close 07:03:41 Received message from Master: op=PointingHead serial=266345 07:03:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:03:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:03:42 Point started: ret=0 07:03:42 point_skyscan result=0 07:03:42 Check angles 07:03:42 SkyScan query 07:03:43 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.175<-21545 Statuses=0009 0009 07:03:43 Msec=0 True Az=136.11 Ze=-143.175 Az status=0009 Ze status=0009 07:03:43 Check angles 07:03:43 SkyScan query 07:03:44 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.16<-20144 Statuses=0009 0009 07:03:44 Msec=750 True Az=153.555 Ze=-122.16 Az status=0009 Ze status=0009 07:03:44 Check angles 07:03:44 SkyScan query 07:03:44 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.74<-18716 Statuses=0009 0009 07:03:44 Msec=1500 True Az=171.405 Ze=-100.74 Az status=0009 Ze status=0009 07:03:45 Check angles 07:03:45 SkyScan query 07:03:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.845<-17323 Statuses=0008 0009 07:03:45 Msec=2250 True Az=176.01 Ze=-79.845 Az status=0008 Ze status=0009 07:03:45 Check angles 07:03:45 SkyScan query 07:03:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.86<-15924 Statuses=0008 0009 07:03:46 Msec=3000 True Az=175.995 Ze=-58.86 Az status=0008 Ze status=0009 07:03:46 Check angles 07:03:46 SkyScan query 07:03:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:03:47 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:03:47 Message to Master queued w/err=0: serial=266345 error=0 07:03:52 Received message from Master: op=Filter serial=266346 07:03:52 Color wheel filter change from 0 to 0 07:03:52 FLIGetFilterPos err=0 currentPosition=0 07:03:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:52 Filter is already there-color wheel unchanged 07:03:52 Received message from Master: op=Shutter serial=266347 07:03:52 Shutter LASER close 07:03:52 Received message from Camera: op=State serial=266349 07:03:52 GetSingleValue result=40 Value=cccccccc 07:03:52 SkyScan query 07:03:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:03:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:53 Parameters OK 07:03:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:53 Set A/D data flow result=40 07:03:53 Set A/D channel type result=40 07:03:53 Set A/D encoding result=40 07:03:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:53 Set channel filter=0.000000e+000 result=40 07:03:53 Config A/D Result=40 07:03:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:53 Get A/D filter: -9.255963e+061 result=40 07:03:53 Get A/D value=-858993460 result=40 07:03:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:53 Parameters OK 07:03:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:53 Set A/D data flow result=40 07:03:53 Set A/D channel type result=40 07:03:53 Set A/D encoding result=40 07:03:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:53 Set channel filter=0.000000e+000 result=40 07:03:53 Config A/D Result=40 07:03:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:53 Get A/D filter: -9.255963e+061 result=40 07:03:53 Get A/D value=-858993460 result=40 07:03:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:53 Aux= 07:03:53 Message to Camera, serial 266349 queued 07:04:29 Received message from Master: op=PointingHead serial=266362 07:04:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:04:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:04:30 Point started: ret=0 07:04:30 point_skyscan result=0 07:04:31 Check angles 07:04:31 SkyScan query 07:04:31 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.3<-13420 Statuses=0009 0009 07:04:31 Msec=0 True Az=152.715 Ze=-21.3 Az status=0009 Ze status=0009 07:04:31 Check angles 07:04:31 SkyScan query 07:04:32 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.345<-12023 Statuses=0009 0009 07:04:32 Msec=750 True Az=135.165 Ze=-0.345 Az status=0009 Ze status=0009 07:04:32 Check angles 07:04:32 SkyScan query 07:04:33 SkyScan query done: ret=0 az=117.675<-7845 ze=20.61<-10626 Statuses=0009 0009 07:04:33 Msec=1500 True Az=117.675 Ze=20.61 Az status=0009 Ze status=0009 07:04:33 Check angles 07:04:33 SkyScan query 07:04:33 SkyScan query done: ret=0 az=100.335<-6689 ze=41.565<-9229 Statuses=0009 0009 07:04:33 Msec=2250 True Az=100.335 Ze=41.565 Az status=0009 Ze status=0009 07:04:34 Check angles 07:04:34 SkyScan query 07:04:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 07:04:34 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 07:04:34 Check angles 07:04:34 SkyScan query 07:04:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:04:35 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:04:35 Message to Master queued w/err=0: serial=266362 error=0 07:04:40 Received message from Master: op=Filter serial=266363 07:04:40 Color wheel filter change from 0 to 0 07:04:40 FLIGetFilterPos err=0 currentPosition=0 07:04:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:40 Filter is already there-color wheel unchanged 07:04:40 Received message from Master: op=Shutter serial=266364 07:04:40 Shutter LASER close 07:04:40 Received message from Camera: op=State serial=266366 07:04:40 GetSingleValue result=40 Value=cccccccc 07:04:40 SkyScan query 07:04:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:04:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:41 Parameters OK 07:04:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:41 Set A/D data flow result=40 07:04:41 Set A/D channel type result=40 07:04:41 Set A/D encoding result=40 07:04:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:41 Set channel filter=0.000000e+000 result=40 07:04:41 Config A/D Result=40 07:04:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:41 Get A/D filter: -9.255963e+061 result=40 07:04:41 Get A/D value=-858993460 result=40 07:04:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:41 Parameters OK 07:04:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:41 Set A/D data flow result=40 07:04:41 Set A/D channel type result=40 07:04:41 Set A/D encoding result=40 07:04:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:41 Set channel filter=0.000000e+000 result=40 07:04:41 Config A/D Result=40 07:04:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:41 Get A/D filter: -9.255963e+061 result=40 07:04:41 Get A/D value=-858993460 result=40 07:04:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:41 Aux= 07:04:41 Message to Camera, serial 266366 queued 07:05:18 Received message from Master: op=PointingHead serial=266379 07:05:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:05:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:05:18 Point started: ret=0 07:05:18 point_skyscan result=0 07:05:19 Check angles 07:05:19 SkyScan query 07:05:19 SkyScan query done: ret=0 az=85.995<-5733 ze=21.24<-10584 Statuses=0008 0009 07:05:19 Msec=0 True Az=85.995 Ze=21.24 Az status=0008 Ze status=0009 07:05:20 Check angles 07:05:20 SkyScan query 07:05:20 SkyScan query done: ret=0 az=86.01<-5734 ze=0.3<-11980 Statuses=0008 0009 07:05:20 Msec=750 True Az=86.01 Ze=0.3 Az status=0008 Ze status=0009 [UTC 2018-12-19 07:05:20] 07:05:20 Check angles 07:05:20 SkyScan query 07:05:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-22.875<-13525 Statuses=0008 0009 07:05:21 Msec=1500 True Az=85.995 Ze=-22.875 Az status=0008 Ze status=0009 07:05:21 Check angles 07:05:21 SkyScan query 07:05:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.09<-14806 Statuses=0008 0009 07:05:22 Msec=2250 True Az=85.995 Ze=-42.09 Az status=0008 Ze status=0009 07:05:22 Check angles 07:05:22 SkyScan query 07:05:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 07:05:22 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 07:05:22 Message to Master queued w/err=0: serial=266379 error=0 07:05:27 Received message from Master: op=Filter serial=266380 07:05:27 Color wheel filter change from 0 to 0 07:05:27 FLIGetFilterPos err=0 currentPosition=0 07:05:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:27 Filter is already there-color wheel unchanged 07:05:28 Received message from Master: op=Shutter serial=266381 07:05:28 Shutter LASER close 07:05:28 Received message from Camera: op=State serial=266383 07:05:28 GetSingleValue result=40 Value=cccccccc 07:05:28 SkyScan query 07:05:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:05:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:28 Parameters OK 07:05:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:28 Set A/D data flow result=40 07:05:28 Set A/D channel type result=40 07:05:28 Set A/D encoding result=40 07:05:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:28 Set channel filter=0.000000e+000 result=40 07:05:28 Config A/D Result=40 07:05:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:28 Get A/D filter: -9.255963e+061 result=40 07:05:28 Get A/D value=-858993460 result=40 07:05:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:28 Parameters OK 07:05:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:28 Set A/D data flow result=40 07:05:28 Set A/D channel type result=40 07:05:28 Set A/D encoding result=40 07:05:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:28 Set channel filter=0.000000e+000 result=40 07:05:28 Config A/D Result=40 07:05:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:28 Get A/D filter: -9.255963e+061 result=40 07:05:28 Get A/D value=-858993460 result=40 07:05:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:28 Aux= 07:05:28 Message to Camera, serial 266383 queued 07:06:05 Received message from Master: op=PointingHead serial=266396 07:06:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:06:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:06:05 Point started: ret=0 07:06:05 point_skyscan result=0 07:06:06 Check angles 07:06:06 SkyScan query 07:06:07 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.12<-17408 Statuses=0009 0009 07:06:07 Msec=0 True Az=108.9 Ze=-81.12 Az status=0009 Ze status=0009 07:06:07 Check angles 07:06:07 SkyScan query 07:06:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 07:06:07 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 07:06:08 Check angles 07:06:08 SkyScan query 07:06:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.915<-20261 Statuses=0008 0009 07:06:08 Msec=1500 True Az=112.995 Ze=-123.915 Az status=0008 Ze status=0009 07:06:08 Check angles 07:06:08 SkyScan query 07:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 07:06:09 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 07:06:09 Check angles 07:06:09 SkyScan query 07:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.23<-23082 Statuses=0008 0009 07:06:10 Msec=3000 True Az=112.995 Ze=-166.23 Az status=0008 Ze status=0009 07:06:10 Check angles 07:06:10 SkyScan query 07:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:06:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:06:10 Message to Master queued w/err=0: serial=266396 error=0 07:06:16 Received message from Master: op=Filter serial=266397 07:06:16 Color wheel filter change from 0 to 0 07:06:16 FLIGetFilterPos err=0 currentPosition=0 07:06:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:16 Filter is already there-color wheel unchanged 07:06:16 Received message from Master: op=Shutter serial=266398 07:06:16 Shutter LASER open 07:06:16 Received message from Camera: op=State serial=266400 07:06:16 GetSingleValue result=40 Value=cccccccc 07:06:16 SkyScan query 07:06:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:06:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:16 Parameters OK 07:06:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:16 Set A/D data flow result=40 07:06:16 Set A/D channel type result=40 07:06:16 Set A/D encoding result=40 07:06:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:16 Set channel filter=0.000000e+000 result=40 07:06:16 Config A/D Result=40 07:06:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:16 Get A/D filter: -9.255963e+061 result=40 07:06:16 Get A/D value=-858993460 result=40 07:06:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:16 Parameters OK 07:06:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:16 Set A/D data flow result=40 07:06:16 Set A/D channel type result=40 07:06:16 Set A/D encoding result=40 07:06:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:16 Set channel filter=0.000000e+000 result=40 07:06:16 Config A/D Result=40 07:06:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:16 Get A/D filter: -9.255963e+061 result=40 07:06:16 Get A/D value=-858993460 result=40 07:06:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:16 Aux= 07:06:16 Message to Camera, serial 266400 queued 07:06:25 Received message from Master: op=Shutter serial=266410 07:06:25 Shutter LASER close 07:06:25 Received message from Master: op=PointingHead serial=266414 07:06:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:06:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:06:26 Point started: ret=0 07:06:26 point_skyscan result=0 07:06:26 Check angles 07:06:26 SkyScan query 07:06:27 SkyScan query done: ret=0 az=90.15<-6010 ze=157.455<-1503 Statuses=0009 0009 07:06:27 Msec=0 True Az=90.15 Ze=157.455 Az status=0009 Ze status=0009 07:06:27 Check angles 07:06:27 SkyScan query 07:06:28 SkyScan query done: ret=0 az=72.315<-4821 ze=136.14<-2924 Statuses=0009 0009 07:06:28 Msec=750 True Az=72.315 Ze=136.14 Az status=0009 Ze status=0009 07:06:28 Check angles 07:06:28 SkyScan query 07:06:29 SkyScan query done: ret=0 az=54.81<-3654 ze=115.155<-4323 Statuses=0009 0009 07:06:29 Msec=1500 True Az=54.81 Ze=115.155 Az status=0009 Ze status=0009 07:06:29 Check angles 07:06:29 SkyScan query 07:06:29 SkyScan query done: ret=0 az=40.995<-2733 ze=94.245<-5717 Statuses=0009 0009 07:06:29 Msec=2250 True Az=40.995 Ze=94.245 Az status=0009 Ze status=0009 07:06:29 Check angles 07:06:29 SkyScan query 07:06:30 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 07:06:30 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 07:06:30 Check angles 07:06:30 SkyScan query 07:06:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 07:06:31 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 07:06:31 Check angles 07:06:31 SkyScan query 07:06:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:06:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:06:32 Message to Master queued w/err=0: serial=266414 error=0 07:06:37 Received message from Master: op=Filter serial=266415 07:06:37 Color wheel filter change from 0 to 0 07:06:37 FLIGetFilterPos err=0 currentPosition=0 07:06:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:37 Filter is already there-color wheel unchanged 07:06:37 Received message from Master: op=Shutter serial=266416 07:06:37 Shutter LASER close 07:06:37 Received message from Camera: op=State serial=266418 07:06:37 GetSingleValue result=40 Value=cccccccc 07:06:37 SkyScan query 07:06:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:06:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:37 Parameters OK 07:06:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:37 Set A/D data flow result=40 07:06:37 Set A/D channel type result=40 07:06:37 Set A/D encoding result=40 07:06:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:37 Set channel filter=0.000000e+000 result=40 07:06:37 Config A/D Result=40 07:06:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:37 Get A/D filter: -9.255963e+061 result=40 07:06:37 Get A/D value=-858993460 result=40 07:06:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:37 Parameters OK 07:06:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:37 Set A/D data flow result=40 07:06:37 Set A/D channel type result=40 07:06:37 Set A/D encoding result=40 07:06:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:37 Set channel filter=0.000000e+000 result=40 07:06:37 Config A/D Result=40 07:06:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:37 Get A/D filter: -9.255963e+061 result=40 07:06:37 Get A/D value=-858993460 result=40 07:06:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:37 Aux= 07:06:37 Message to Camera, serial 266418 queued 07:07:15 Received message from Master: op=PointingHead serial=266431 07:07:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:07:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:07:15 Point started: ret=0 07:07:15 point_skyscan result=0 07:07:16 Check angles 07:07:16 SkyScan query 07:07:16 SkyScan query done: ret=0 az=64.17<-4278 ze=81.495<-6567 Statuses=0009 0009 07:07:16 Msec=0 True Az=64.17 Ze=81.495 Az status=0009 Ze status=0009 07:07:16 Check angles 07:07:16 SkyScan query 07:07:17 SkyScan query done: ret=0 az=81.6<-5440 ze=102.435<-5171 Statuses=0009 0009 07:07:17 Msec=750 True Az=81.6 Ze=102.435 Az status=0009 Ze status=0009 07:07:17 Check angles 07:07:17 SkyScan query 07:07:18 SkyScan query done: ret=0 az=99.555<-6637 ze=123.825<-3745 Statuses=0009 0009 07:07:18 Msec=1500 True Az=99.555 Ze=123.825 Az status=0009 Ze status=0009 07:07:18 Check angles 07:07:18 SkyScan query 07:07:18 SkyScan query done: ret=0 az=116.865<-7791 ze=144.765<-2349 Statuses=0009 0009 07:07:18 Msec=2250 True Az=116.865 Ze=144.765 Az status=0009 Ze status=0009 07:07:19 Check angles 07:07:19 SkyScan query 07:07:19 SkyScan query done: ret=0 az=131.01<-8734 ze=165.735<-951 Statuses=0009 0009 07:07:19 Msec=3000 True Az=131.01 Ze=165.735 Az status=0009 Ze status=0009 07:07:19 Check angles 07:07:19 SkyScan query 07:07:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-172.845<-23523 Statuses=0008 0009 07:07:20 Msec=3750 True Az=130.995 Ze=-172.845 Az status=0008 Ze status=0009 07:07:20 Check angles 07:07:20 SkyScan query 07:07:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.92<-22128 Statuses=0008 0009 07:07:21 Msec=4500 True Az=130.995 Ze=-151.92 Az status=0008 Ze status=0009 07:07:21 Check angles 07:07:21 SkyScan query 07:07:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 07:07:21 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 07:07:21 Message to Master queued w/err=0: serial=266431 error=0 07:07:26 Received message from Master: op=Filter serial=266432 07:07:26 Color wheel filter change from 0 to 0 07:07:26 FLIGetFilterPos err=0 currentPosition=0 07:07:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:26 Filter is already there-color wheel unchanged 07:07:27 Received message from Master: op=Shutter serial=266433 07:07:27 Shutter LASER close 07:07:27 Received message from Camera: op=State serial=266435 07:07:27 GetSingleValue result=40 Value=cccccccc 07:07:27 SkyScan query 07:07:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:07:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:27 Parameters OK 07:07:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:27 Set A/D data flow result=40 07:07:27 Set A/D channel type result=40 07:07:27 Set A/D encoding result=40 07:07:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:27 Set channel filter=0.000000e+000 result=40 07:07:27 Config A/D Result=40 07:07:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:27 Get A/D filter: -9.255963e+061 result=40 07:07:27 Get A/D value=-858993460 result=40 07:07:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:27 Parameters OK 07:07:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:27 Set A/D data flow result=40 07:07:27 Set A/D channel type result=40 07:07:27 Set A/D encoding result=40 07:07:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:27 Set channel filter=0.000000e+000 result=40 07:07:27 Config A/D Result=40 07:07:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:27 Get A/D filter: -9.255963e+061 result=40 07:07:27 Get A/D value=-858993460 result=40 07:07:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:27 Aux= 07:07:27 Message to Camera, serial 266435 queued 07:08:04 Received message from Master: op=PointingHead serial=266448 07:08:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:08:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:08:04 Point started: ret=0 07:08:04 point_skyscan result=0 07:08:05 Check angles 07:08:05 SkyScan query 07:08:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 07:08:06 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 07:08:06 Check angles 07:08:06 SkyScan query 07:08:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:08:07 Msec=750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:08:07 Message to Master queued w/err=0: serial=266448 error=0 07:08:12 Received message from Master: op=Filter serial=266449 07:08:12 Color wheel filter change from 0 to 0 07:08:12 FLIGetFilterPos err=0 currentPosition=0 07:08:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:12 Filter is already there-color wheel unchanged 07:08:12 Received message from Master: op=Shutter serial=266450 07:08:12 Shutter LASER open 07:08:12 Received message from Camera: op=State serial=266452 07:08:12 GetSingleValue result=40 Value=cccccccc 07:08:12 SkyScan query 07:08:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:08:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:12 Parameters OK 07:08:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:12 Set A/D data flow result=40 07:08:12 Set A/D channel type result=40 07:08:12 Set A/D encoding result=40 07:08:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:12 Set channel filter=0.000000e+000 result=40 07:08:12 Config A/D Result=40 07:08:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:12 Get A/D filter: -9.255963e+061 result=40 07:08:12 Get A/D value=-858993460 result=40 07:08:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:12 Parameters OK 07:08:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:12 Set A/D data flow result=40 07:08:12 Set A/D channel type result=40 07:08:12 Set A/D encoding result=40 07:08:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:12 Set channel filter=0.000000e+000 result=40 07:08:12 Config A/D Result=40 07:08:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:12 Get A/D filter: -9.255963e+061 result=40 07:08:12 Get A/D value=-858993460 result=40 07:08:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-173.009995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:12 Aux= 07:08:12 Message to Camera, serial 266452 queued 07:08:21 Received message from Master: op=Shutter serial=266462 07:08:21 Shutter LASER close 07:08:21 Received message from Master: op=PointingHead serial=266466 07:08:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:08:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:08:22 Point started: ret=0 07:08:22 point_skyscan result=0 07:08:23 Check angles 07:08:23 SkyScan query 07:08:23 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.04<-21536 Statuses=0009 0009 07:08:23 Msec=0 True Az=136.155 Ze=-143.04 Az status=0009 Ze status=0009 07:08:23 Check angles 07:08:23 SkyScan query 07:08:24 SkyScan query done: ret=0 az=153.69<-10246 ze=-122.055<-20137 Statuses=0009 0009 07:08:24 Msec=750 True Az=153.69 Ze=-122.055 Az status=0009 Ze status=0009 07:08:24 Check angles 07:08:24 SkyScan query 07:08:25 SkyScan query done: ret=0 az=171.12<-11408 ze=-101.13<-18742 Statuses=0009 0009 07:08:25 Msec=1500 True Az=171.12 Ze=-101.13 Az status=0009 Ze status=0009 07:08:25 Check angles 07:08:25 SkyScan query 07:08:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.175<-17345 Statuses=0008 0009 07:08:25 Msec=2250 True Az=176.01 Ze=-80.175 Az status=0008 Ze status=0009 07:08:26 Check angles 07:08:26 SkyScan query 07:08:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.19<-15946 Statuses=0008 0009 07:08:26 Msec=3000 True Az=175.995 Ze=-59.19 Az status=0008 Ze status=0009 07:08:26 Check angles 07:08:26 SkyScan query 07:08:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:08:27 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:08:27 Message to Master queued w/err=0: serial=266466 error=0 07:08:32 Received message from Master: op=Filter serial=266467 07:08:32 Color wheel filter change from 0 to 0 07:08:32 FLIGetFilterPos err=0 currentPosition=0 07:08:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:32 Filter is already there-color wheel unchanged 07:08:32 Received message from Master: op=Shutter serial=266468 07:08:32 Shutter LASER close 07:08:32 Received message from Camera: op=State serial=266470 07:08:32 GetSingleValue result=40 Value=cccccccc 07:08:32 SkyScan query 07:08:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:08:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:33 Parameters OK 07:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:33 Set A/D data flow result=40 07:08:33 Set A/D channel type result=40 07:08:33 Set A/D encoding result=40 07:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:33 Set channel filter=0.000000e+000 result=40 07:08:33 Config A/D Result=40 07:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:33 Get A/D filter: -9.255963e+061 result=40 07:08:33 Get A/D value=-858993460 result=40 07:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:33 Parameters OK 07:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:33 Set A/D data flow result=40 07:08:33 Set A/D channel type result=40 07:08:33 Set A/D encoding result=40 07:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:33 Set channel filter=0.000000e+000 result=40 07:08:33 Config A/D Result=40 07:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:33 Get A/D filter: -9.255963e+061 result=40 07:08:33 Get A/D value=-858993460 result=40 07:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:33 Aux= 07:08:33 Message to Camera, serial 266470 queued 07:09:10 Received message from Master: op=PointingHead serial=266483 07:09:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:09:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:09:10 Point started: ret=0 07:09:10 point_skyscan result=0 07:09:11 Check angles 07:09:11 SkyScan query 07:09:11 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.885<-13459 Statuses=0009 0009 07:09:11 Msec=0 True Az=152.94 Ze=-21.885 Az status=0009 Ze status=0009 07:09:12 Check angles 07:09:12 SkyScan query 07:09:12 SkyScan query done: ret=0 az=135.555<-9037 ze=-0.84<-12056 Statuses=0009 0009 07:09:12 Msec=750 True Az=135.555 Ze=-0.84 Az status=0009 Ze status=0009 07:09:12 Check angles 07:09:12 SkyScan query 07:09:13 SkyScan query done: ret=0 az=118.05<-7870 ze=20.055<-10663 Statuses=0009 0009 07:09:13 Msec=1500 True Az=118.05 Ze=20.055 Az status=0009 Ze status=0009 07:09:13 Check angles 07:09:13 SkyScan query 07:09:14 SkyScan query done: ret=0 az=100.665<-6711 ze=41.07<-9262 Statuses=0009 0009 07:09:14 Msec=2250 True Az=100.665 Ze=41.07 Az status=0009 Ze status=0009 07:09:14 Check angles 07:09:14 SkyScan query 07:09:14 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 07:09:14 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 07:09:15 Check angles 07:09:15 SkyScan query 07:09:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:09:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:09:15 Message to Master queued w/err=0: serial=266483 error=0 07:09:20 Received message from Master: op=Filter serial=266484 07:09:20 Color wheel filter change from 0 to 0 07:09:20 FLIGetFilterPos err=0 currentPosition=0 07:09:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:20 Filter is already there-color wheel unchanged 07:09:20 Received message from Master: op=Shutter serial=266485 07:09:20 Shutter LASER close 07:09:20 Received message from Camera: op=State serial=266487 07:09:20 GetSingleValue result=40 Value=cccccccc 07:09:20 SkyScan query 07:09:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:09:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:21 Parameters OK 07:09:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:21 Set A/D data flow result=40 07:09:21 Set A/D channel type result=40 07:09:21 Set A/D encoding result=40 07:09:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:21 Set channel filter=0.000000e+000 result=40 07:09:21 Config A/D Result=40 07:09:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:21 Get A/D filter: -9.255963e+061 result=40 07:09:21 Get A/D value=-858993460 result=40 07:09:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:21 Parameters OK 07:09:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:21 Set A/D data flow result=40 07:09:21 Set A/D channel type result=40 07:09:21 Set A/D encoding result=40 07:09:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:21 Set channel filter=0.000000e+000 result=40 07:09:21 Config A/D Result=40 07:09:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:21 Get A/D filter: -9.255963e+061 result=40 07:09:21 Get A/D value=-858993460 result=40 07:09:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:21 Aux= 07:09:21 Message to Camera, serial 266487 queued 07:09:58 Received message from Master: op=PointingHead serial=266500 07:09:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:09:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:09:58 Point started: ret=0 07:09:58 point_skyscan result=0 07:09:59 Check angles 07:09:59 SkyScan query 07:10:00 SkyScan query done: ret=0 az=85.995<-5733 ze=21.645<-10557 Statuses=0008 0009 07:10:00 Msec=0 True Az=85.995 Ze=21.645 Az status=0008 Ze status=0009 07:10:00 Check angles 07:10:00 SkyScan query 07:10:00 SkyScan query done: ret=0 az=86.01<-5734 ze=0.3<-11980 Statuses=0008 0009 07:10:00 Msec=750 True Az=86.01 Ze=0.3 Az status=0008 Ze status=0009 07:10:01 Check angles 07:10:01 SkyScan query 07:10:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.685<-13379 Statuses=0008 0009 07:10:01 Msec=1500 True Az=85.995 Ze=-20.685 Az status=0008 Ze status=0009 07:10:01 Check angles 07:10:01 SkyScan query 07:10:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.595<-14773 Statuses=0008 0009 07:10:02 Msec=2250 True Az=85.995 Ze=-41.595 Az status=0008 Ze status=0009 07:10:02 Check angles 07:10:02 SkyScan query 07:10:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 07:10:03 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 07:10:03 Message to Master queued w/err=0: serial=266500 error=0 07:10:08 Received message from Master: op=Filter serial=266501 07:10:08 Color wheel filter change from 0 to 0 07:10:08 FLIGetFilterPos err=0 currentPosition=0 07:10:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:08 Filter is already there-color wheel unchanged 07:10:08 Received message from Master: op=Shutter serial=266502 07:10:08 Shutter LASER close 07:10:08 Received message from Camera: op=State serial=266504 07:10:08 GetSingleValue result=40 Value=cccccccc 07:10:08 SkyScan query 07:10:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:10:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:08 Parameters OK 07:10:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:08 Set A/D data flow result=40 07:10:08 Set A/D channel type result=40 07:10:08 Set A/D encoding result=40 07:10:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:08 Set channel filter=0.000000e+000 result=40 07:10:08 Config A/D Result=40 07:10:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:08 Get A/D filter: -9.255963e+061 result=40 07:10:08 Get A/D value=-858993460 result=40 07:10:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:08 Parameters OK 07:10:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:08 Set A/D data flow result=40 07:10:08 Set A/D channel type result=40 07:10:08 Set A/D encoding result=40 07:10:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:08 Set channel filter=0.000000e+000 result=40 07:10:08 Config A/D Result=40 07:10:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:08 Get A/D filter: -9.255963e+061 result=40 07:10:08 Get A/D value=-858993460 result=40 07:10:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:08 Aux= 07:10:08 Message to Camera, serial 266504 queued 07:10:45 Received message from Master: op=PointingHead serial=266517 07:10:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:10:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:10:46 Point started: ret=0 07:10:46 point_skyscan result=0 07:10:46 Check angles 07:10:46 SkyScan query 07:10:47 SkyScan query done: ret=0 az=109.44<-7296 ze=-81.87<-17458 Statuses=0009 0009 07:10:47 Msec=0 True Az=109.44 Ze=-81.87 Az status=0009 Ze status=0009 07:10:47 Check angles 07:10:47 SkyScan query 07:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 07:10:48 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 07:10:48 Check angles 07:10:48 SkyScan query 07:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 07:10:48 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 07:10:49 Check angles 07:10:49 SkyScan query 07:10:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 07:10:49 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 07:10:49 Check angles 07:10:49 SkyScan query 07:10:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.035<-23069 Statuses=0008 0009 07:10:50 Msec=3000 True Az=112.995 Ze=-166.035 Az status=0008 Ze status=0009 07:10:50 Check angles 07:10:50 SkyScan query 07:10:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:10:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:10:51 Message to Master queued w/err=0: serial=266517 error=0 07:10:56 Received message from Master: op=Filter serial=266518 07:10:56 Color wheel filter change from 0 to 0 07:10:56 FLIGetFilterPos err=0 currentPosition=0 07:10:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:56 Filter is already there-color wheel unchanged 07:10:56 Received message from Master: op=Shutter serial=266519 07:10:56 Shutter LASER open 07:10:56 Received message from Camera: op=State serial=266521 07:10:56 GetSingleValue result=40 Value=cccccccc 07:10:56 SkyScan query 07:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:10:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:57 Parameters OK 07:10:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:57 Set A/D data flow result=40 07:10:57 Set A/D channel type result=40 07:10:57 Set A/D encoding result=40 07:10:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:57 Set channel filter=0.000000e+000 result=40 07:10:57 Config A/D Result=40 07:10:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:57 Get A/D filter: -9.255963e+061 result=40 07:10:57 Get A/D value=-858993460 result=40 07:10:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:57 Parameters OK 07:10:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:57 Set A/D data flow result=40 07:10:57 Set A/D channel type result=40 07:10:57 Set A/D encoding result=40 07:10:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:57 Set channel filter=0.000000e+000 result=40 07:10:57 Config A/D Result=40 07:10:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:57 Get A/D filter: -9.255963e+061 result=40 07:10:57 Get A/D value=-858993460 result=40 07:10:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:57 Aux= 07:10:57 Message to Camera, serial 266521 queued 07:11:05 Received message from Master: op=Shutter serial=266531 07:11:05 Shutter LASER close 07:11:06 Received message from Master: op=PointingHead serial=266535 07:11:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:11:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:11:06 Point started: ret=0 07:11:06 point_skyscan result=0 07:11:07 Check angles 07:11:07 SkyScan query 07:11:07 SkyScan query done: ret=0 az=89.865<-5991 ze=157.2<-1520 Statuses=0009 0009 07:11:07 Msec=0 True Az=89.865 Ze=157.2 Az status=0009 Ze status=0009 07:11:07 Check angles 07:11:07 SkyScan query 07:11:08 SkyScan query done: ret=0 az=72.045<-4803 ze=135.765<-2949 Statuses=0009 0009 07:11:08 Msec=750 True Az=72.045 Ze=135.765 Az status=0009 Ze status=0009 07:11:08 Check angles 07:11:08 SkyScan query 07:11:09 SkyScan query done: ret=0 az=54.555<-3637 ze=114.855<-4343 Statuses=0009 0009 07:11:09 Msec=1500 True Az=54.555 Ze=114.855 Az status=0009 Ze status=0009 07:11:09 Check angles 07:11:09 SkyScan query 07:11:10 SkyScan query done: ret=0 az=40.98<-2732 ze=93.945<-5737 Statuses=0009 0009 07:11:10 Msec=2250 True Az=40.98 Ze=93.945 Az status=0009 Ze status=0009 07:11:10 Check angles 07:11:10 SkyScan query 07:11:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.93<-7138 Statuses=0008 0009 07:11:10 Msec=3000 True Az=40.995 Ze=72.93 Az status=0008 Ze status=0009 07:11:10 Check angles 07:11:10 SkyScan query 07:11:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 07:11:11 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 07:11:11 Check angles 07:11:11 SkyScan query 07:11:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:11:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:11:12 Message to Master queued w/err=0: serial=266535 error=0 07:11:17 Received message from Master: op=Filter serial=266536 07:11:17 Color wheel filter change from 0 to 0 07:11:17 FLIGetFilterPos err=0 currentPosition=0 07:11:17 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:17 Filter is already there-color wheel unchanged 07:11:17 Received message from Master: op=Shutter serial=266537 07:11:17 Shutter LASER close 07:11:17 Received message from Camera: op=State serial=266539 07:11:17 GetSingleValue result=40 Value=cccccccc 07:11:17 SkyScan query 07:11:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:11:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:18 Parameters OK 07:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:18 Set A/D data flow result=40 07:11:18 Set A/D channel type result=40 07:11:18 Set A/D encoding result=40 07:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:18 Set channel filter=0.000000e+000 result=40 07:11:18 Config A/D Result=40 07:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:18 Get A/D filter: -9.255963e+061 result=40 07:11:18 Get A/D value=-858993460 result=40 07:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:18 Parameters OK 07:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:18 Set A/D data flow result=40 07:11:18 Set A/D channel type result=40 07:11:18 Set A/D encoding result=40 07:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:18 Set channel filter=0.000000e+000 result=40 07:11:18 Config A/D Result=40 07:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:18 Get A/D filter: -9.255963e+061 result=40 07:11:18 Get A/D value=-858993460 result=40 07:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:18 Aux= 07:11:18 Message to Camera, serial 266539 queued 07:11:55 Received message from Master: op=PointingHead serial=266552 07:11:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:11:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:11:55 Point started: ret=0 07:11:55 point_skyscan result=0 07:11:56 Check angles 07:11:56 SkyScan query 07:11:56 SkyScan query done: ret=0 az=63.915<-4261 ze=81.24<-6584 Statuses=0009 0009 07:11:56 Msec=0 True Az=63.915 Ze=81.24 Az status=0009 Ze status=0009 07:11:57 Check angles 07:11:57 SkyScan query 07:11:57 SkyScan query done: ret=0 az=81.78<-5452 ze=102.63<-5158 Statuses=0009 0009 07:11:57 Msec=750 True Az=81.78 Ze=102.63 Az status=0009 Ze status=0009 07:11:57 Check angles 07:11:57 SkyScan query 07:11:58 SkyScan query done: ret=0 az=99.645<-6643 ze=124.035<-3731 Statuses=0009 0009 07:11:58 Msec=1500 True Az=99.645 Ze=124.035 Az status=0009 Ze status=0009 07:11:58 Check angles 07:11:58 SkyScan query 07:11:59 SkyScan query done: ret=0 az=117.105<-7807 ze=144.96<-2336 Statuses=0009 0009 07:11:59 Msec=2250 True Az=117.105 Ze=144.96 Az status=0009 Ze status=0009 07:11:59 Check angles 07:11:59 SkyScan query 07:11:59 SkyScan query done: ret=0 az=131.025<-8735 ze=166.38<-908 Statuses=0009 0009 07:11:59 Msec=3000 True Az=131.025 Ze=166.38 Az status=0009 Ze status=0009 07:12:00 Check angles 07:12:00 SkyScan query 07:12:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-172.68<-23512 Statuses=0008 0009 07:12:00 Msec=3750 True Az=130.995 Ze=-172.68 Az status=0008 Ze status=0009 07:12:00 Check angles 07:12:00 SkyScan query 07:12:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.755<-22117 Statuses=0008 0009 07:12:01 Msec=4500 True Az=130.995 Ze=-151.755 Az status=0008 Ze status=0009 07:12:01 Check angles 07:12:01 SkyScan query 07:12:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 07:12:02 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 07:12:02 Message to Master queued w/err=0: serial=266552 error=0 07:12:07 Received message from Master: op=Filter serial=266553 07:12:07 Color wheel filter change from 0 to 0 07:12:07 FLIGetFilterPos err=0 currentPosition=0 07:12:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:07 Filter is already there-color wheel unchanged 07:12:07 Received message from Master: op=Shutter serial=266554 07:12:07 Shutter LASER close 07:12:07 Received message from Camera: op=State serial=266556 07:12:07 GetSingleValue result=40 Value=cccccccc 07:12:07 SkyScan query 07:12:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:12:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:08 Parameters OK 07:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:08 Set A/D data flow result=40 07:12:08 Set A/D channel type result=40 07:12:08 Set A/D encoding result=40 07:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:08 Set channel filter=0.000000e+000 result=40 07:12:08 Config A/D Result=40 07:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:08 Get A/D filter: -9.255963e+061 result=40 07:12:08 Get A/D value=-858993460 result=40 07:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:08 Parameters OK 07:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:08 Set A/D data flow result=40 07:12:08 Set A/D channel type result=40 07:12:08 Set A/D encoding result=40 07:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:08 Set channel filter=0.000000e+000 result=40 07:12:08 Config A/D Result=40 07:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:08 Get A/D filter: -9.255963e+061 result=40 07:12:08 Get A/D value=-858993460 result=40 07:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:08 Aux= 07:12:08 Message to Camera, serial 266556 queued 07:12:44 Received message from Master: op=PointingHead serial=266569 07:12:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:12:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:12:45 Point started: ret=0 07:12:45 point_skyscan result=0 07:12:45 Check angles 07:12:45 SkyScan query 07:12:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0009 0009 07:12:46 Msec=0 True Az=112.995 Ze=-171.075 Az status=0009 Ze status=0009 07:12:46 Check angles 07:12:46 SkyScan query 07:12:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:12:47 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:12:47 Message to Master queued w/err=0: serial=266569 error=0 07:12:52 Received message from Master: op=Filter serial=266570 07:12:52 Color wheel filter change from 0 to 0 07:12:52 FLIGetFilterPos err=0 currentPosition=0 07:12:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:52 Filter is already there-color wheel unchanged 07:12:52 Received message from Master: op=Shutter serial=266571 07:12:52 Shutter LASER open 07:12:52 Received message from Camera: op=State serial=266573 07:12:52 GetSingleValue result=40 Value=cccccccc 07:12:52 SkyScan query 07:12:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:12:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:53 Parameters OK 07:12:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:53 Set A/D data flow result=40 07:12:53 Set A/D channel type result=40 07:12:53 Set A/D encoding result=40 07:12:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:53 Set channel filter=0.000000e+000 result=40 07:12:53 Config A/D Result=40 07:12:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:53 Get A/D filter: -9.255963e+061 result=40 07:12:53 Get A/D value=-858993460 result=40 07:12:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:53 Parameters OK 07:12:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:53 Set A/D data flow result=40 07:12:53 Set A/D channel type result=40 07:12:53 Set A/D encoding result=40 07:12:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:53 Set channel filter=0.000000e+000 result=40 07:12:53 Config A/D Result=40 07:12:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:53 Get A/D filter: -9.255963e+061 result=40 07:12:53 Get A/D value=-858993460 result=40 07:12:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:53 Aux= 07:12:53 Message to Camera, serial 266573 queued 07:13:01 Received message from Master: op=Shutter serial=266583 07:13:01 Shutter LASER close 07:13:02 Received message from Master: op=PointingHead serial=266587 07:13:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:13:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:13:02 Point started: ret=0 07:13:02 point_skyscan result=0 07:13:03 Check angles 07:13:03 SkyScan query 07:13:03 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.34<-21556 Statuses=0009 0009 07:13:03 Msec=0 True Az=135.885 Ze=-143.34 Az status=0009 Ze status=0009 07:13:04 Check angles 07:13:04 SkyScan query 07:13:04 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.385<-20159 Statuses=0009 0009 07:13:04 Msec=750 True Az=153.375 Ze=-122.385 Az status=0009 Ze status=0009 07:13:04 Check angles 07:13:04 SkyScan query 07:13:05 SkyScan query done: ret=0 az=170.94<-11396 ze=-101.505<-18767 Statuses=0009 0009 07:13:05 Msec=1500 True Az=170.94 Ze=-101.505 Az status=0009 Ze status=0009 07:13:05 Check angles 07:13:05 SkyScan query 07:13:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.49<-17366 Statuses=0008 0009 07:13:06 Msec=2250 True Az=176.01 Ze=-80.49 Az status=0008 Ze status=0009 07:13:06 Check angles 07:13:06 SkyScan query 07:13:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.535<-15969 Statuses=0008 0009 07:13:06 Msec=3000 True Az=175.995 Ze=-59.535 Az status=0008 Ze status=0009 07:13:07 Check angles 07:13:07 SkyScan query 07:13:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:13:07 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:13:07 Message to Master queued w/err=0: serial=266587 error=0 07:13:12 Received message from Master: op=Filter serial=266588 07:13:12 Color wheel filter change from 0 to 0 07:13:12 FLIGetFilterPos err=0 currentPosition=0 07:13:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:12 Filter is already there-color wheel unchanged 07:13:12 Received message from Master: op=Shutter serial=266589 07:13:12 Shutter LASER close 07:13:13 Received message from Camera: op=State serial=266591 07:13:13 GetSingleValue result=40 Value=cccccccc 07:13:13 SkyScan query 07:13:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:13:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:13 Parameters OK 07:13:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:13 Set A/D data flow result=40 07:13:13 Set A/D channel type result=40 07:13:13 Set A/D encoding result=40 07:13:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:13 Set channel filter=0.000000e+000 result=40 07:13:13 Config A/D Result=40 07:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:13 Get A/D filter: -9.255963e+061 result=40 07:13:13 Get A/D value=-858993460 result=40 07:13:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:13 Parameters OK 07:13:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:13 Set A/D data flow result=40 07:13:13 Set A/D channel type result=40 07:13:13 Set A/D encoding result=40 07:13:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:13 Set channel filter=0.000000e+000 result=40 07:13:13 Config A/D Result=40 07:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:13 Get A/D filter: -9.255963e+061 result=40 07:13:13 Get A/D value=-858993460 result=40 07:13:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:13 Aux= 07:13:13 Message to Camera, serial 266591 queued 07:13:50 Received message from Master: op=PointingHead serial=266604 07:13:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:13:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:13:50 Point started: ret=0 07:13:50 point_skyscan result=0 07:13:51 Check angles 07:13:51 SkyScan query 07:13:52 SkyScan query done: ret=0 az=153.075<-10205 ze=-21.93<-13462 Statuses=0009 0009 07:13:52 Msec=0 True Az=153.075 Ze=-21.93 Az status=0009 Ze status=0009 07:13:52 Check angles 07:13:52 SkyScan query 07:13:52 SkyScan query done: ret=0 az=135.69<-9046 ze=-0.885<-12059 Statuses=0009 0009 07:13:52 Msec=750 True Az=135.69 Ze=-0.885 Az status=0009 Ze status=0009 07:13:53 Check angles 07:13:53 SkyScan query 07:13:53 SkyScan query done: ret=0 az=118.125<-7875 ze=19.995<-10667 Statuses=0009 0009 07:13:53 Msec=1500 True Az=118.125 Ze=19.995 Az status=0009 Ze status=0009 07:13:53 Check angles 07:13:53 SkyScan query 07:13:54 SkyScan query done: ret=0 az=100.74<-6716 ze=41.025<-9265 Statuses=0009 0009 07:13:54 Msec=2250 True Az=100.74 Ze=41.025 Az status=0009 Ze status=0009 07:13:54 Check angles 07:13:54 SkyScan query 07:13:55 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 07:13:55 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 07:13:55 Check angles 07:13:55 SkyScan query 07:13:55 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 07:13:55 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 07:13:55 Message to Master queued w/err=0: serial=266604 error=0 07:14:00 Received message from Master: op=Filter serial=266605 07:14:00 Color wheel filter change from 0 to 0 07:14:00 FLIGetFilterPos err=0 currentPosition=0 07:14:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:00 Filter is already there-color wheel unchanged 07:14:01 Received message from Master: op=Shutter serial=266606 07:14:01 Shutter LASER close 07:14:01 Received message from Camera: op=State serial=266608 07:14:01 GetSingleValue result=40 Value=cccccccc 07:14:01 SkyScan query 07:14:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:14:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:01 Parameters OK 07:14:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:01 Set A/D data flow result=40 07:14:01 Set A/D channel type result=40 07:14:01 Set A/D encoding result=40 07:14:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:01 Set channel filter=0.000000e+000 result=40 07:14:01 Config A/D Result=40 07:14:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:01 Get A/D filter: -9.255963e+061 result=40 07:14:01 Get A/D value=-858993460 result=40 07:14:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:01 Parameters OK 07:14:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:01 Set A/D data flow result=40 07:14:01 Set A/D channel type result=40 07:14:01 Set A/D encoding result=40 07:14:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:01 Set channel filter=0.000000e+000 result=40 07:14:01 Config A/D Result=40 07:14:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:01 Get A/D filter: -9.255963e+061 result=40 07:14:01 Get A/D value=-858993460 result=40 07:14:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:01 Aux= 07:14:01 Message to Camera, serial 266608 queued 07:14:38 Received message from Master: op=PointingHead serial=266621 07:14:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:14:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:14:39 Point started: ret=0 07:14:39 point_skyscan result=0 07:14:39 Check angles 07:14:39 SkyScan query 07:14:40 SkyScan query done: ret=0 az=85.995<-5733 ze=21.78<-10548 Statuses=0008 0009 07:14:40 Msec=0 True Az=85.995 Ze=21.78 Az status=0008 Ze status=0009 07:14:40 Check angles 07:14:40 SkyScan query 07:14:41 SkyScan query done: ret=0 az=85.995<-5733 ze=0.915<-11939 Statuses=0008 0009 07:14:41 Msec=750 True Az=85.995 Ze=0.915 Az status=0008 Ze status=0009 07:14:41 Check angles 07:14:41 SkyScan query 07:14:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.07<-13338 Statuses=0008 0009 07:14:41 Msec=1500 True Az=85.995 Ze=-20.07 Az status=0008 Ze status=0009 07:14:42 Check angles 07:14:42 SkyScan query 07:14:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.965<-14731 Statuses=0008 0009 07:14:42 Msec=2250 True Az=85.995 Ze=-40.965 Az status=0008 Ze status=0009 07:14:42 Check angles 07:14:42 SkyScan query 07:14:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 07:14:43 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 07:14:43 Message to Master queued w/err=0: serial=266621 error=0 [UTC 2018-12-19 07:14:48] 07:14:48 Received message from Master: op=Filter serial=266622 07:14:48 Color wheel filter change from 0 to 0 07:14:48 FLIGetFilterPos err=0 currentPosition=0 07:14:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:48 Filter is already there-color wheel unchanged 07:14:48 Received message from Master: op=Shutter serial=266623 07:14:48 Shutter LASER close 07:14:48 Received message from Camera: op=State serial=266625 07:14:48 GetSingleValue result=40 Value=cccccccc 07:14:48 SkyScan query 07:14:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:14:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:49 Parameters OK 07:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:49 Set A/D data flow result=40 07:14:49 Set A/D channel type result=40 07:14:49 Set A/D encoding result=40 07:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:49 Set channel filter=0.000000e+000 result=40 07:14:49 Config A/D Result=40 07:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:49 Get A/D filter: -9.255963e+061 result=40 07:14:49 Get A/D value=-858993460 result=40 07:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:49 Parameters OK 07:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:49 Set A/D data flow result=40 07:14:49 Set A/D channel type result=40 07:14:49 Set A/D encoding result=40 07:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:49 Set channel filter=0.000000e+000 result=40 07:14:49 Config A/D Result=40 07:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:49 Get A/D filter: -9.255963e+061 result=40 07:14:49 Get A/D value=-858993460 result=40 07:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:49 Aux= 07:14:49 Message to Camera, serial 266625 queued 07:15:26 Received message from Master: op=PointingHead serial=266638 07:15:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:15:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:15:26 Point started: ret=0 07:15:26 point_skyscan result=0 07:15:27 Check angles 07:15:27 SkyScan query 07:15:27 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.315<-17421 Statuses=0009 0009 07:15:27 Msec=0 True Az=109.17 Ze=-81.315 Az status=0009 Ze status=0009 07:15:27 Received message from Master: op=Identify serial=266639 07:15:27 Check angles 07:15:27 SkyScan query 07:15:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 07:15:28 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 07:15:28 Check angles 07:15:28 SkyScan query 07:15:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.255<-20217 Statuses=0008 0009 07:15:29 Msec=1500 True Az=112.995 Ze=-123.255 Az status=0008 Ze status=0009 07:15:29 Check angles 07:15:29 SkyScan query 07:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.18<-21612 Statuses=0008 0009 07:15:30 Msec=2250 True Az=112.995 Ze=-144.18 Az status=0008 Ze status=0009 07:15:30 Check angles 07:15:30 SkyScan query 07:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.165<-23011 Statuses=0008 0009 07:15:30 Msec=3000 True Az=112.995 Ze=-165.165 Az status=0008 Ze status=0009 07:15:30 Check angles 07:15:30 SkyScan query 07:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:15:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:15:31 Message to Master queued w/err=0: serial=266638 error=0 07:15:36 Received message from Master: op=Filter serial=266642 07:15:36 Color wheel filter change from 0 to 0 07:15:36 FLIGetFilterPos err=0 currentPosition=0 07:15:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:36 Filter is already there-color wheel unchanged 07:15:36 Received message from Master: op=Shutter serial=266643 07:15:36 Shutter LASER open 07:15:36 Received message from Camera: op=State serial=266645 07:15:36 GetSingleValue result=40 Value=cccccccc 07:15:36 SkyScan query 07:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:15:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:37 Parameters OK 07:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:37 Set A/D data flow result=40 07:15:37 Set A/D channel type result=40 07:15:37 Set A/D encoding result=40 07:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:37 Set channel filter=0.000000e+000 result=40 07:15:37 Config A/D Result=40 07:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:37 Get A/D filter: -9.255963e+061 result=40 07:15:37 Get A/D value=-858993460 result=40 07:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:37 Parameters OK 07:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:37 Set A/D data flow result=40 07:15:37 Set A/D channel type result=40 07:15:37 Set A/D encoding result=40 07:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:37 Set channel filter=0.000000e+000 result=40 07:15:37 Config A/D Result=40 07:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:37 Get A/D filter: -9.255963e+061 result=40 07:15:37 Get A/D value=-858993460 result=40 07:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:37 Aux= 07:15:37 Message to Camera, serial 266645 queued 07:15:45 Received message from Master: op=Shutter serial=266655 07:15:45 Shutter LASER close 07:15:46 Received message from Master: op=PointingHead serial=266659 07:15:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:15:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:15:46 Point started: ret=0 07:15:46 point_skyscan result=0 07:15:47 Check angles 07:15:47 SkyScan query 07:15:47 SkyScan query done: ret=0 az=89.505<-5967 ze=156.735<-1551 Statuses=0009 0009 07:15:47 Msec=0 True Az=89.505 Ze=156.735 Az status=0009 Ze status=0009 07:15:48 Check angles 07:15:48 SkyScan query 07:15:48 SkyScan query done: ret=0 az=72.03<-4802 ze=135.81<-2946 Statuses=0009 0009 07:15:48 Msec=750 True Az=72.03 Ze=135.81 Az status=0009 Ze status=0009 07:15:48 Check angles 07:15:48 SkyScan query 07:15:49 SkyScan query done: ret=0 az=54.57<-3638 ze=114.78<-4348 Statuses=0009 0009 07:15:49 Msec=1500 True Az=54.57 Ze=114.78 Az status=0009 Ze status=0009 07:15:49 Check angles 07:15:49 SkyScan query 07:15:50 SkyScan query done: ret=0 az=40.965<-2731 ze=93.42<-5772 Statuses=0009 0009 07:15:50 Msec=2250 True Az=40.965 Ze=93.42 Az status=0009 Ze status=0009 07:15:50 Check angles 07:15:50 SkyScan query 07:15:51 SkyScan query done: ret=0 az=40.98<-2732 ze=72.48<-7168 Statuses=0008 0009 07:15:51 Msec=3000 True Az=40.98 Ze=72.48 Az status=0008 Ze status=0009 07:15:51 Check angles 07:15:51 SkyScan query 07:15:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 07:15:51 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 07:15:51 Check angles 07:15:51 SkyScan query 07:15:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:15:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:15:52 Message to Master queued w/err=0: serial=266659 error=0 [UTC 2018-12-19 07:15:52] 07:15:57 Received message from Master: op=Filter serial=266660 07:15:57 Color wheel filter change from 0 to 0 07:15:57 FLIGetFilterPos err=0 currentPosition=0 07:15:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:57 Filter is already there-color wheel unchanged 07:15:57 Received message from Master: op=Shutter serial=266661 07:15:57 Shutter LASER close 07:15:57 Received message from Camera: op=State serial=266663 07:15:57 GetSingleValue result=40 Value=cccccccc 07:15:57 SkyScan query 07:15:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:15:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:58 Parameters OK 07:15:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:58 Set A/D data flow result=40 07:15:58 Set A/D channel type result=40 07:15:58 Set A/D encoding result=40 07:15:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:58 Set channel filter=0.000000e+000 result=40 07:15:58 Config A/D Result=40 07:15:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:58 Get A/D filter: -9.255963e+061 result=40 07:15:58 Get A/D value=-858993460 result=40 07:15:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:58 Parameters OK 07:15:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:58 Set A/D data flow result=40 07:15:58 Set A/D channel type result=40 07:15:58 Set A/D encoding result=40 07:15:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:58 Set channel filter=0.000000e+000 result=40 07:15:58 Config A/D Result=40 07:15:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:58 Get A/D filter: -9.255963e+061 result=40 07:15:58 Get A/D value=-858993460 result=40 07:15:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:58 Aux= 07:15:58 Message to Camera, serial 266663 queued 07:16:35 Received message from Master: op=PointingHead serial=266676 07:16:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:16:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:16:35 Point started: ret=0 07:16:35 point_skyscan result=0 07:16:36 Check angles 07:16:36 SkyScan query 07:16:37 SkyScan query done: ret=0 az=63.78<-4252 ze=81.105<-6593 Statuses=0009 0009 07:16:37 Msec=0 True Az=63.78 Ze=81.105 Az status=0009 Ze status=0009 07:16:37 Check angles 07:16:37 SkyScan query 07:16:37 SkyScan query done: ret=0 az=81.645<-5443 ze=102.525<-5165 Statuses=0009 0009 07:16:37 Msec=750 True Az=81.645 Ze=102.525 Az status=0009 Ze status=0009 07:16:38 Check angles 07:16:38 SkyScan query 07:16:38 SkyScan query done: ret=0 az=99.54<-6636 ze=123.915<-3739 Statuses=0009 0009 07:16:38 Msec=1500 True Az=99.54 Ze=123.915 Az status=0009 Ze status=0009 07:16:38 Check angles 07:16:38 SkyScan query 07:16:39 SkyScan query done: ret=0 az=116.97<-7798 ze=144.84<-2344 Statuses=0009 0009 07:16:39 Msec=2250 True Az=116.97 Ze=144.84 Az status=0009 Ze status=0009 07:16:39 Check angles 07:16:39 SkyScan query 07:16:40 SkyScan query done: ret=0 az=131.025<-8735 ze=166.245<-917 Statuses=0009 0009 07:16:40 Msec=3000 True Az=131.025 Ze=166.245 Az status=0009 Ze status=0009 07:16:40 Check angles 07:16:40 SkyScan query 07:16:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-172.41<-23494 Statuses=0008 0009 07:16:40 Msec=3750 True Az=130.995 Ze=-172.41 Az status=0008 Ze status=0009 07:16:41 Check angles 07:16:41 SkyScan query 07:16:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-150.96<-22064 Statuses=0008 0009 07:16:41 Msec=4500 True Az=130.995 Ze=-150.96 Az status=0008 Ze status=0009 07:16:41 Check angles 07:16:41 SkyScan query 07:16:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.45<-21430 Statuses=0008 0008 07:16:42 Msec=5250 True Az=130.995 Ze=-141.45 Az status=0008 Ze status=0008 07:16:42 Message to Master queued w/err=0: serial=266676 error=0 07:16:47 Received message from Master: op=Filter serial=266677 07:16:47 Color wheel filter change from 0 to 0 07:16:47 FLIGetFilterPos err=0 currentPosition=0 07:16:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:47 Filter is already there-color wheel unchanged 07:16:47 Received message from Master: op=Shutter serial=266678 07:16:47 Shutter LASER close 07:16:47 Received message from Camera: op=State serial=266680 07:16:47 GetSingleValue result=40 Value=cccccccc 07:16:47 SkyScan query 07:16:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:16:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:48 Parameters OK 07:16:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:48 Set A/D data flow result=40 07:16:48 Set A/D channel type result=40 07:16:48 Set A/D encoding result=40 07:16:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:48 Set channel filter=0.000000e+000 result=40 07:16:48 Config A/D Result=40 07:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:48 Get A/D filter: -9.255963e+061 result=40 07:16:48 Get A/D value=-858993460 result=40 07:16:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:48 Parameters OK 07:16:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:48 Set A/D data flow result=40 07:16:48 Set A/D channel type result=40 07:16:48 Set A/D encoding result=40 07:16:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:48 Set channel filter=0.000000e+000 result=40 07:16:48 Config A/D Result=40 07:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:48 Get A/D filter: -9.255963e+061 result=40 07:16:48 Get A/D value=-858993460 result=40 07:16:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:48 Aux= 07:16:48 Message to Camera, serial 266680 queued 07:17:25 Received message from Master: op=PointingHead serial=266693 07:17:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:17:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:17:25 Point started: ret=0 07:17:25 point_skyscan result=0 07:17:26 Check angles 07:17:26 SkyScan query 07:17:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 07:17:26 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 07:17:26 Check angles 07:17:26 SkyScan query 07:17:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:17:27 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:17:27 Message to Master queued w/err=0: serial=266693 error=0 07:17:32 Received message from Master: op=Filter serial=266694 07:17:32 Color wheel filter change from 0 to 0 07:17:32 FLIGetFilterPos err=0 currentPosition=0 07:17:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:32 Filter is already there-color wheel unchanged 07:17:32 Received message from Master: op=Shutter serial=266695 07:17:32 Shutter LASER open 07:17:32 Received message from Camera: op=State serial=266697 07:17:32 GetSingleValue result=40 Value=cccccccc 07:17:32 SkyScan query 07:17:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:17:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:33 Parameters OK 07:17:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:33 Set A/D data flow result=40 07:17:33 Set A/D channel type result=40 07:17:33 Set A/D encoding result=40 07:17:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:33 Set channel filter=0.000000e+000 result=40 07:17:33 Config A/D Result=40 07:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:33 Get A/D filter: -9.255963e+061 result=40 07:17:33 Get A/D value=-858993460 result=40 07:17:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:33 Parameters OK 07:17:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:33 Set A/D data flow result=40 07:17:33 Set A/D channel type result=40 07:17:33 Set A/D encoding result=40 07:17:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:33 Set channel filter=0.000000e+000 result=40 07:17:33 Config A/D Result=40 07:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:33 Get A/D filter: -9.255963e+061 result=40 07:17:33 Get A/D value=-858993460 result=40 07:17:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:33 Aux= 07:17:33 Message to Camera, serial 266697 queued 07:17:41 Received message from Master: op=Shutter serial=266707 07:17:41 Shutter LASER close 07:17:42 Received message from Master: op=PointingHead serial=266711 07:17:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:17:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:17:42 Point started: ret=0 07:17:42 point_skyscan result=0 07:17:43 Check angles 07:17:43 SkyScan query 07:17:44 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.325<-21555 Statuses=0009 0009 07:17:44 Msec=0 True Az=135.96 Ze=-143.325 Az status=0009 Ze status=0009 07:17:44 Check angles 07:17:44 SkyScan query 07:17:45 SkyScan query done: ret=0 az=153.465<-10231 ze=-122.355<-20157 Statuses=0009 0009 07:17:45 Msec=750 True Az=153.465 Ze=-122.355 Az status=0009 Ze status=0009 07:17:45 Check angles 07:17:45 SkyScan query 07:17:45 SkyScan query done: ret=0 az=170.925<-11395 ze=-101.475<-18765 Statuses=0009 0009 07:17:45 Msec=1500 True Az=170.925 Ze=-101.475 Az status=0009 Ze status=0009 07:17:45 Check angles 07:17:45 SkyScan query 07:17:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.415<-17361 Statuses=0008 0009 07:17:46 Msec=2250 True Az=176.01 Ze=-80.415 Az status=0008 Ze status=0009 07:17:46 Check angles 07:17:46 SkyScan query 07:17:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.505<-15967 Statuses=0008 0009 07:17:47 Msec=3000 True Az=175.995 Ze=-59.505 Az status=0008 Ze status=0009 07:17:47 Check angles 07:17:47 SkyScan query 07:17:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:17:48 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:17:48 Message to Master queued w/err=0: serial=266711 error=0 07:17:53 Received message from Master: op=Filter serial=266712 07:17:53 Color wheel filter change from 0 to 0 07:17:53 FLIGetFilterPos err=0 currentPosition=0 07:17:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:53 Filter is already there-color wheel unchanged 07:17:53 Received message from Master: op=Shutter serial=266713 07:17:53 Shutter LASER close 07:17:53 Received message from Camera: op=State serial=266715 07:17:53 GetSingleValue result=40 Value=cccccccc 07:17:53 SkyScan query 07:17:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:17:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:53 Parameters OK 07:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:53 Set A/D data flow result=40 07:17:53 Set A/D channel type result=40 07:17:53 Set A/D encoding result=40 07:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:53 Set channel filter=0.000000e+000 result=40 07:17:53 Config A/D Result=40 07:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:53 Get A/D filter: -9.255963e+061 result=40 07:17:53 Get A/D value=-858993460 result=40 07:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:53 Parameters OK 07:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:53 Set A/D data flow result=40 07:17:53 Set A/D channel type result=40 07:17:53 Set A/D encoding result=40 07:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:53 Set channel filter=0.000000e+000 result=40 07:17:53 Config A/D Result=40 07:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:53 Get A/D filter: -9.255963e+061 result=40 07:17:53 Get A/D value=-858993460 result=40 07:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:53 Aux= 07:17:53 Message to Camera, serial 266715 queued 07:18:30 Received message from Master: op=PointingHead serial=266728 07:18:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:18:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:18:31 Point started: ret=0 07:18:31 point_skyscan result=0 07:18:31 Check angles 07:18:31 SkyScan query 07:18:32 SkyScan query done: ret=0 az=152.835<-10189 ze=-21.57<-13438 Statuses=0009 0009 07:18:32 Msec=0 True Az=152.835 Ze=-21.57 Az status=0009 Ze status=0009 07:18:32 Check angles 07:18:32 SkyScan query 07:18:33 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.57<-12038 Statuses=0009 0009 07:18:33 Msec=750 True Az=135.3 Ze=-0.57 Az status=0009 Ze status=0009 07:18:33 Check angles 07:18:33 SkyScan query 07:18:33 SkyScan query done: ret=0 az=117.75<-7850 ze=20.34<-10644 Statuses=0009 0009 07:18:33 Msec=1500 True Az=117.75 Ze=20.34 Az status=0009 Ze status=0009 07:18:34 Check angles 07:18:34 SkyScan query 07:18:34 SkyScan query done: ret=0 az=100.47<-6698 ze=41.34<-9244 Statuses=0009 0009 07:18:34 Msec=2250 True Az=100.47 Ze=41.34 Az status=0009 Ze status=0009 07:18:34 Check angles 07:18:34 SkyScan query 07:18:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 07:18:35 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 07:18:35 Check angles 07:18:35 SkyScan query 07:18:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:18:36 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:18:36 Message to Master queued w/err=0: serial=266728 error=0 07:18:41 Received message from Master: op=Filter serial=266729 07:18:41 Color wheel filter change from 0 to 0 07:18:41 FLIGetFilterPos err=0 currentPosition=0 07:18:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:41 Filter is already there-color wheel unchanged 07:18:41 Received message from Master: op=Shutter serial=266730 07:18:41 Shutter LASER close 07:18:41 Received message from Camera: op=State serial=266732 07:18:41 GetSingleValue result=40 Value=cccccccc 07:18:41 SkyScan query 07:18:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:18:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:41 Parameters OK 07:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:41 Set A/D data flow result=40 07:18:41 Set A/D channel type result=40 07:18:41 Set A/D encoding result=40 07:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:41 Set channel filter=0.000000e+000 result=40 07:18:41 Config A/D Result=40 07:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:41 Get A/D filter: -9.255963e+061 result=40 07:18:41 Get A/D value=-858993460 result=40 07:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:41 Parameters OK 07:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:41 Set A/D data flow result=40 07:18:41 Set A/D channel type result=40 07:18:41 Set A/D encoding result=40 07:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:41 Set channel filter=0.000000e+000 result=40 07:18:41 Config A/D Result=40 07:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:41 Get A/D filter: -9.255963e+061 result=40 07:18:41 Get A/D value=-858993460 result=40 07:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:41 Aux= 07:18:41 Message to Camera, serial 266732 queued 07:19:18 Received message from Master: op=PointingHead serial=266745 07:19:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:19:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:19:19 Point started: ret=0 07:19:19 point_skyscan result=0 07:19:20 Check angles 07:19:20 SkyScan query 07:19:20 SkyScan query done: ret=0 az=85.995<-5733 ze=21.48<-10568 Statuses=0008 0009 07:19:20 Msec=0 True Az=85.995 Ze=21.48 Az status=0008 Ze status=0009 07:19:20 Check angles 07:19:20 SkyScan query 07:19:21 SkyScan query done: ret=0 az=86.01<-5734 ze=0.105<-11993 Statuses=0008 0009 07:19:21 Msec=750 True Az=86.01 Ze=0.105 Az status=0008 Ze status=0009 07:19:21 Check angles 07:19:21 SkyScan query 07:19:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.865<-13391 Statuses=0008 0009 07:19:22 Msec=1500 True Az=85.995 Ze=-20.865 Az status=0008 Ze status=0009 07:19:22 Check angles 07:19:22 SkyScan query 07:19:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.805<-14787 Statuses=0008 0009 07:19:22 Msec=2250 True Az=85.995 Ze=-41.805 Az status=0008 Ze status=0009 07:19:23 Check angles 07:19:23 SkyScan query 07:19:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 07:19:23 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 07:19:23 Message to Master queued w/err=0: serial=266745 error=0 07:19:28 Received message from Master: op=Filter serial=266746 07:19:28 Color wheel filter change from 0 to 0 07:19:28 FLIGetFilterPos err=0 currentPosition=0 07:19:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:28 Filter is already there-color wheel unchanged 07:19:28 Received message from Master: op=Shutter serial=266747 07:19:28 Shutter LASER close 07:19:28 Received message from Camera: op=State serial=266749 07:19:28 GetSingleValue result=40 Value=cccccccc 07:19:28 SkyScan query 07:19:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:19:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:29 Parameters OK 07:19:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:29 Set A/D data flow result=40 07:19:29 Set A/D channel type result=40 07:19:29 Set A/D encoding result=40 07:19:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:29 Set channel filter=0.000000e+000 result=40 07:19:29 Config A/D Result=40 07:19:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:29 Get A/D filter: -9.255963e+061 result=40 07:19:29 Get A/D value=-858993460 result=40 07:19:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:29 Parameters OK 07:19:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:29 Set A/D data flow result=40 07:19:29 Set A/D channel type result=40 07:19:29 Set A/D encoding result=40 07:19:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:29 Set channel filter=0.000000e+000 result=40 07:19:29 Config A/D Result=40 07:19:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:29 Get A/D filter: -9.255963e+061 result=40 07:19:29 Get A/D value=-858993460 result=40 07:19:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:29 Aux= 07:19:29 Message to Camera, serial 266749 queued 07:20:06 Received message from Master: op=PointingHead serial=266762 07:20:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:20:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:20:06 Point started: ret=0 07:20:06 point_skyscan result=0 07:20:07 Check angles 07:20:07 SkyScan query 07:20:07 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.285<-17419 Statuses=0009 0009 07:20:07 Msec=0 True Az=108.96 Ze=-81.285 Az status=0009 Ze status=0009 07:20:08 Check angles 07:20:08 SkyScan query 07:20:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 07:20:08 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 07:20:08 Check angles 07:20:08 SkyScan query 07:20:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 07:20:09 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 07:20:09 Check angles 07:20:09 SkyScan query 07:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 07:20:10 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 07:20:10 Check angles 07:20:10 SkyScan query 07:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.395<-23093 Statuses=0008 0009 07:20:10 Msec=3000 True Az=112.995 Ze=-166.395 Az status=0008 Ze status=0009 07:20:11 Check angles 07:20:11 SkyScan query 07:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:20:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:20:11 Message to Master queued w/err=0: serial=266762 error=0 07:20:16 Received message from Master: op=Filter serial=266763 07:20:16 Color wheel filter change from 0 to 0 07:20:16 FLIGetFilterPos err=0 currentPosition=0 07:20:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:16 Filter is already there-color wheel unchanged 07:20:16 Received message from Master: op=Shutter serial=266764 07:20:16 Shutter LASER open 07:20:17 Received message from Camera: op=State serial=266766 07:20:17 GetSingleValue result=40 Value=cccccccc 07:20:17 SkyScan query 07:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:20:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:17 Parameters OK 07:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:17 Set A/D data flow result=40 07:20:17 Set A/D channel type result=40 07:20:17 Set A/D encoding result=40 07:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:17 Set channel filter=0.000000e+000 result=40 07:20:17 Config A/D Result=40 07:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:17 Get A/D filter: -9.255963e+061 result=40 07:20:17 Get A/D value=-858993460 result=40 07:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:17 Parameters OK 07:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:17 Set A/D data flow result=40 07:20:17 Set A/D channel type result=40 07:20:17 Set A/D encoding result=40 07:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:17 Set channel filter=0.000000e+000 result=40 07:20:17 Config A/D Result=40 07:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:17 Get A/D filter: -9.255963e+061 result=40 07:20:17 Get A/D value=-858993460 result=40 07:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:17 Aux= 07:20:17 Message to Camera, serial 266766 queued 07:20:26 Received message from Master: op=Shutter serial=266776 07:20:26 Shutter LASER close 07:20:26 Received message from Master: op=PointingHead serial=266780 07:20:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:20:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:20:26 Point started: ret=0 07:20:26 point_skyscan result=0 07:20:27 Check angles 07:20:27 SkyScan query 07:20:28 SkyScan query done: ret=0 az=90.135<-6009 ze=157.425<-1505 Statuses=0009 0009 07:20:28 Msec=0 True Az=90.135 Ze=157.425 Az status=0009 Ze status=0009 07:20:28 Check angles 07:20:28 SkyScan query 07:20:28 SkyScan query done: ret=0 az=72.6<-4840 ze=136.455<-2903 Statuses=0009 0009 07:20:28 Msec=750 True Az=72.6 Ze=136.455 Az status=0009 Ze status=0009 07:20:29 Check angles 07:20:29 SkyScan query 07:20:29 SkyScan query done: ret=0 az=55.23<-3682 ze=115.56<-4296 Statuses=0009 0009 07:20:29 Msec=1500 True Az=55.23 Ze=115.56 Az status=0009 Ze status=0009 07:20:29 Check angles 07:20:29 SkyScan query 07:20:30 SkyScan query done: ret=0 az=41.025<-2735 ze=94.575<-5695 Statuses=0009 0009 07:20:30 Msec=2250 True Az=41.025 Ze=94.575 Az status=0009 Ze status=0009 07:20:30 Check angles 07:20:30 SkyScan query 07:20:31 SkyScan query done: ret=0 az=40.995<-2733 ze=73.62<-7092 Statuses=0008 0009 07:20:31 Msec=3000 True Az=40.995 Ze=73.62 Az status=0008 Ze status=0009 07:20:31 Check angles 07:20:31 SkyScan query 07:20:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.98<-8468 Statuses=0008 0009 07:20:31 Msec=3750 True Az=40.995 Ze=52.98 Az status=0008 Ze status=0009 07:20:32 Check angles 07:20:32 SkyScan query 07:20:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:20:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:20:32 Message to Master queued w/err=0: serial=266780 error=0 07:20:37 Received message from Master: op=Filter serial=266781 07:20:37 Color wheel filter change from 0 to 0 07:20:37 FLIGetFilterPos err=0 currentPosition=0 07:20:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:37 Filter is already there-color wheel unchanged 07:20:37 Received message from Master: op=Shutter serial=266782 07:20:37 Shutter LASER close 07:20:38 Received message from Camera: op=State serial=266784 07:20:38 GetSingleValue result=40 Value=cccccccc 07:20:38 SkyScan query 07:20:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:20:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:38 Parameters OK 07:20:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:38 Set A/D data flow result=40 07:20:38 Set A/D channel type result=40 07:20:38 Set A/D encoding result=40 07:20:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:38 Set channel filter=0.000000e+000 result=40 07:20:38 Config A/D Result=40 07:20:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:38 Get A/D filter: -9.255963e+061 result=40 07:20:38 Get A/D value=-858993460 result=40 07:20:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:38 Parameters OK 07:20:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:38 Set A/D data flow result=40 07:20:38 Set A/D channel type result=40 07:20:38 Set A/D encoding result=40 07:20:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:38 Set channel filter=0.000000e+000 result=40 07:20:38 Config A/D Result=40 07:20:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:38 Get A/D filter: -9.255963e+061 result=40 07:20:38 Get A/D value=-858993460 result=40 07:20:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:38 Aux= 07:20:38 Message to Camera, serial 266784 queued 07:21:15 Received message from Master: op=PointingHead serial=266797 07:21:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:21:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:21:16 Point started: ret=0 07:21:16 point_skyscan result=0 07:21:16 Check angles 07:21:16 SkyScan query 07:21:17 SkyScan query done: ret=0 az=64.2<-4280 ze=81.645<-6557 Statuses=0009 0009 07:21:17 Msec=0 True Az=64.2 Ze=81.645 Az status=0009 Ze status=0009 07:21:17 Check angles 07:21:17 SkyScan query 07:21:18 SkyScan query done: ret=0 az=81.66<-5444 ze=102.585<-5161 Statuses=0009 0009 07:21:18 Msec=750 True Az=81.66 Ze=102.585 Az status=0009 Ze status=0009 07:21:18 Check angles 07:21:18 SkyScan query 07:21:18 SkyScan query done: ret=0 az=99.105<-6607 ze=123.54<-3764 Statuses=0009 0009 07:21:18 Msec=1500 True Az=99.105 Ze=123.54 Az status=0009 Ze status=0009 07:21:19 Check angles 07:21:19 SkyScan query 07:21:19 SkyScan query done: ret=0 az=116.7<-7780 ze=144.465<-2369 Statuses=0009 0009 07:21:19 Msec=2250 True Az=116.7 Ze=144.465 Az status=0009 Ze status=0009 07:21:19 Check angles 07:21:19 SkyScan query 07:21:20 SkyScan query done: ret=0 az=130.995<-8733 ze=165.42<-972 Statuses=0009 0009 07:21:20 Msec=3000 True Az=130.995 Ze=165.42 Az status=0009 Ze status=0009 07:21:20 Check angles 07:21:20 SkyScan query 07:21:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.145<-23543 Statuses=0008 0009 07:21:21 Msec=3750 True Az=130.995 Ze=-173.145 Az status=0008 Ze status=0009 07:21:21 Check angles 07:21:21 SkyScan query 07:21:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.22<-22148 Statuses=0008 0009 07:21:21 Msec=4500 True Az=130.995 Ze=-152.22 Az status=0008 Ze status=0009 07:21:22 Check angles 07:21:22 SkyScan query 07:21:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 07:21:22 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 07:21:22 Message to Master queued w/err=0: serial=266797 error=0 07:21:27 Received message from Master: op=Filter serial=266798 07:21:27 Color wheel filter change from 0 to 0 07:21:27 FLIGetFilterPos err=0 currentPosition=0 07:21:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:27 Filter is already there-color wheel unchanged 07:21:27 Received message from Master: op=Shutter serial=266799 07:21:27 Shutter LASER close 07:21:27 Received message from Camera: op=State serial=266801 07:21:27 GetSingleValue result=40 Value=cccccccc 07:21:27 SkyScan query 07:21:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:21:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:28 Parameters OK 07:21:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:28 Set A/D data flow result=40 07:21:28 Set A/D channel type result=40 07:21:28 Set A/D encoding result=40 07:21:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:28 Set channel filter=0.000000e+000 result=40 07:21:28 Config A/D Result=40 07:21:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:28 Get A/D filter: -9.255963e+061 result=40 07:21:28 Get A/D value=-858993460 result=40 07:21:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:28 Parameters OK 07:21:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:28 Set A/D data flow result=40 07:21:28 Set A/D channel type result=40 07:21:28 Set A/D encoding result=40 07:21:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:28 Set channel filter=0.000000e+000 result=40 07:21:28 Config A/D Result=40 07:21:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:28 Get A/D filter: -9.255963e+061 result=40 07:21:28 Get A/D value=-858993460 result=40 07:21:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:28 Aux= 07:21:28 Message to Camera, serial 266801 queued 07:22:05 Received message from Master: op=PointingHead serial=266814 07:22:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:22:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:22:05 Point started: ret=0 07:22:05 point_skyscan result=0 07:22:06 Check angles 07:22:06 SkyScan query 07:22:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0009 0009 07:22:07 Msec=0 True Az=112.995 Ze=-170.955 Az status=0009 Ze status=0009 07:22:07 Check angles 07:22:07 SkyScan query 07:22:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:22:07 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:22:07 Message to Master queued w/err=0: serial=266814 error=0 07:22:12 Received message from Master: op=Filter serial=266815 07:22:12 Color wheel filter change from 0 to 0 07:22:12 FLIGetFilterPos err=0 currentPosition=0 07:22:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:12 Filter is already there-color wheel unchanged 07:22:12 Received message from Master: op=Shutter serial=266816 07:22:12 Shutter LASER open 07:22:13 Received message from Camera: op=State serial=266818 07:22:13 GetSingleValue result=40 Value=cccccccc 07:22:13 SkyScan query 07:22:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:22:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:13 Parameters OK 07:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:13 Set A/D data flow result=40 07:22:13 Set A/D channel type result=40 07:22:13 Set A/D encoding result=40 07:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:13 Set channel filter=0.000000e+000 result=40 07:22:13 Config A/D Result=40 07:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:13 Get A/D filter: -9.255963e+061 result=40 07:22:13 Get A/D value=-858993460 result=40 07:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:13 Parameters OK 07:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:13 Set A/D data flow result=40 07:22:13 Set A/D channel type result=40 07:22:13 Set A/D encoding result=40 07:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:13 Set channel filter=0.000000e+000 result=40 07:22:13 Config A/D Result=40 07:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:13 Get A/D filter: -9.255963e+061 result=40 07:22:13 Get A/D value=-858993460 result=40 07:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:13 Aux= 07:22:13 Message to Camera, serial 266818 queued 07:22:21 Received message from Master: op=Shutter serial=266827 07:22:21 Shutter LASER close 07:22:21 Received message from Master: op=PointingHead serial=266831 07:22:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:22:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:22:22 Point started: ret=0 07:22:22 point_skyscan result=0 07:22:22 Check angles 07:22:22 SkyScan query 07:22:23 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.265<-21551 Statuses=0009 0009 07:22:23 Msec=0 True Az=135.915 Ze=-143.265 Az status=0009 Ze status=0009 07:22:23 Check angles 07:22:23 SkyScan query 07:22:24 SkyScan query done: ret=0 az=153.465<-10231 ze=-122.28<-20152 Statuses=0009 0009 07:22:24 Msec=750 True Az=153.465 Ze=-122.28 Az status=0009 Ze status=0009 07:22:24 Check angles 07:22:24 SkyScan query 07:22:24 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.86<-18724 Statuses=0009 0009 07:22:24 Msec=1500 True Az=171.225 Ze=-100.86 Az status=0009 Ze status=0009 07:22:25 Check angles 07:22:25 SkyScan query 07:22:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.95<-17330 Statuses=0008 0009 07:22:25 Msec=2250 True Az=176.01 Ze=-79.95 Az status=0008 Ze status=0009 07:22:25 Check angles 07:22:25 SkyScan query 07:22:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.965<-15931 Statuses=0008 0009 07:22:26 Msec=3000 True Az=175.995 Ze=-58.965 Az status=0008 Ze status=0009 07:22:26 Check angles 07:22:26 SkyScan query 07:22:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:22:27 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:22:27 Message to Master queued w/err=0: serial=266831 error=0 07:22:32 Received message from Master: op=Filter serial=266832 07:22:32 Color wheel filter change from 0 to 0 07:22:32 FLIGetFilterPos err=0 currentPosition=0 07:22:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:32 Filter is already there-color wheel unchanged 07:22:32 Received message from Master: op=Shutter serial=266833 07:22:32 Shutter LASER close 07:22:32 Received message from Camera: op=State serial=266835 07:22:32 GetSingleValue result=40 Value=cccccccc 07:22:32 SkyScan query 07:22:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:22:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:33 Parameters OK 07:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:33 Set A/D data flow result=40 07:22:33 Set A/D channel type result=40 07:22:33 Set A/D encoding result=40 07:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:33 Set channel filter=0.000000e+000 result=40 07:22:33 Config A/D Result=40 07:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:33 Get A/D filter: -9.255963e+061 result=40 07:22:33 Get A/D value=-858993460 result=40 07:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:33 Parameters OK 07:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:33 Set A/D data flow result=40 07:22:33 Set A/D channel type result=40 07:22:33 Set A/D encoding result=40 07:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:33 Set channel filter=0.000000e+000 result=40 07:22:33 Config A/D Result=40 07:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:33 Get A/D filter: -9.255963e+061 result=40 07:22:33 Get A/D value=-858993460 result=40 07:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:33 Aux= 07:22:33 Message to Camera, serial 266835 queued 07:23:09 Received message from Master: op=PointingHead serial=266848 07:23:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:23:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:23:10 Point started: ret=0 07:23:10 point_skyscan result=0 07:23:11 Check angles 07:23:11 SkyScan query 07:23:11 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.33<-13422 Statuses=0009 0009 07:23:11 Msec=0 True Az=152.715 Ze=-21.33 Az status=0009 Ze status=0009 07:23:11 Check angles 07:23:11 SkyScan query 07:23:12 SkyScan query done: ret=0 az=135.24<-9016 ze=-0.36<-12024 Statuses=0009 0009 07:23:12 Msec=750 True Az=135.24 Ze=-0.36 Az status=0009 Ze status=0009 07:23:12 Check angles 07:23:12 SkyScan query 07:23:13 SkyScan query done: ret=0 az=117.645<-7843 ze=20.595<-10627 Statuses=0009 0009 07:23:13 Msec=1500 True Az=117.645 Ze=20.595 Az status=0009 Ze status=0009 07:23:13 Check angles 07:23:13 SkyScan query 07:23:13 SkyScan query done: ret=0 az=100.305<-6687 ze=41.535<-9231 Statuses=0009 0009 07:23:13 Msec=2250 True Az=100.305 Ze=41.535 Az status=0009 Ze status=0009 07:23:14 Check angles 07:23:14 SkyScan query 07:23:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 07:23:14 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 07:23:14 Check angles 07:23:14 SkyScan query 07:23:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:23:15 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:23:15 Message to Master queued w/err=0: serial=266848 error=0 07:23:20 Received message from Master: op=Filter serial=266849 07:23:20 Color wheel filter change from 0 to 0 07:23:20 FLIGetFilterPos err=0 currentPosition=0 07:23:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:20 Filter is already there-color wheel unchanged 07:23:20 Received message from Master: op=Shutter serial=266850 07:23:20 Shutter LASER close 07:23:20 Received message from Camera: op=State serial=266852 07:23:20 GetSingleValue result=40 Value=cccccccc 07:23:20 SkyScan query 07:23:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:23:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:21 Parameters OK 07:23:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:21 Set A/D data flow result=40 07:23:21 Set A/D channel type result=40 07:23:21 Set A/D encoding result=40 07:23:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:21 Set channel filter=0.000000e+000 result=40 07:23:21 Config A/D Result=40 07:23:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:21 Get A/D filter: -9.255963e+061 result=40 07:23:21 Get A/D value=-858993460 result=40 07:23:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:21 Parameters OK 07:23:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:21 Set A/D data flow result=40 07:23:21 Set A/D channel type result=40 07:23:21 Set A/D encoding result=40 07:23:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:21 Set channel filter=0.000000e+000 result=40 07:23:21 Config A/D Result=40 07:23:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:21 Get A/D filter: -9.255963e+061 result=40 07:23:21 Get A/D value=-858993460 result=40 07:23:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:21 Aux= 07:23:21 Message to Camera, serial 266852 queued 07:23:58 Received message from Master: op=PointingHead serial=266865 07:23:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:23:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:23:58 Point started: ret=0 07:23:58 point_skyscan result=0 07:23:59 Check angles 07:23:59 SkyScan query 07:23:59 SkyScan query done: ret=0 az=85.995<-5733 ze=21.24<-10584 Statuses=0008 0009 07:23:59 Msec=0 True Az=85.995 Ze=21.24 Az status=0008 Ze status=0009 07:24:00 Check angles 07:24:00 SkyScan query 07:24:00 SkyScan query done: ret=0 az=86.01<-5734 ze=0.285<-11981 Statuses=0008 0009 07:24:00 Msec=750 True Az=86.01 Ze=0.285 Az status=0008 Ze status=0009 07:24:00 Check angles 07:24:00 SkyScan query 07:24:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.105<-13407 Statuses=0008 0009 07:24:01 Msec=1500 True Az=85.995 Ze=-21.105 Az status=0008 Ze status=0009 07:24:01 Check angles 07:24:01 SkyScan query 07:24:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.12<-14808 Statuses=0008 0009 07:24:02 Msec=2250 True Az=85.995 Ze=-42.12 Az status=0008 Ze status=0009 07:24:02 Check angles 07:24:02 SkyScan query 07:24:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:24:02 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:24:02 Message to Master queued w/err=0: serial=266865 error=0 07:24:07 Received message from Master: op=Filter serial=266866 07:24:07 Color wheel filter change from 0 to 0 07:24:07 FLIGetFilterPos err=0 currentPosition=0 07:24:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:07 Filter is already there-color wheel unchanged 07:24:08 Received message from Master: op=Shutter serial=266867 07:24:08 Shutter LASER close 07:24:08 Received message from Camera: op=State serial=266869 07:24:08 GetSingleValue result=40 Value=cccccccc 07:24:08 SkyScan query 07:24:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:24:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:08 Parameters OK 07:24:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:08 Set A/D data flow result=40 07:24:08 Set A/D channel type result=40 07:24:08 Set A/D encoding result=40 07:24:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:08 Set channel filter=0.000000e+000 result=40 07:24:08 Config A/D Result=40 07:24:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:08 Get A/D filter: -9.255963e+061 result=40 07:24:08 Get A/D value=-858993460 result=40 07:24:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:08 Parameters OK 07:24:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:08 Set A/D data flow result=40 07:24:08 Set A/D channel type result=40 07:24:08 Set A/D encoding result=40 07:24:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:08 Set channel filter=0.000000e+000 result=40 07:24:08 Config A/D Result=40 07:24:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:08 Get A/D filter: -9.255963e+061 result=40 07:24:08 Get A/D value=-858993460 result=40 07:24:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:08 Aux= 07:24:08 Message to Camera, serial 266869 queued 07:24:45 Received message from Master: op=PointingHead serial=266882 07:24:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:24:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:24:45 Point started: ret=0 07:24:45 point_skyscan result=0 07:24:46 Check angles 07:24:46 SkyScan query 07:24:47 SkyScan query done: ret=0 az=109.41<-7294 ze=-81.81<-17454 Statuses=0009 0009 07:24:47 Msec=0 True Az=109.41 Ze=-81.81 Az status=0009 Ze status=0009 07:24:47 Check angles 07:24:47 SkyScan query 07:24:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.72<-18848 Statuses=0008 0009 07:24:47 Msec=750 True Az=112.995 Ze=-102.72 Az status=0008 Ze status=0009 07:24:48 Check angles 07:24:48 SkyScan query 07:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 07:24:48 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 07:24:48 Check angles 07:24:48 SkyScan query 07:24:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 07:24:49 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 07:24:49 Check angles 07:24:49 SkyScan query 07:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.99<-23066 Statuses=0008 0009 07:24:50 Msec=3000 True Az=112.995 Ze=-165.99 Az status=0008 Ze status=0009 07:24:50 Check angles 07:24:50 SkyScan query 07:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:24:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:24:50 Message to Master queued w/err=0: serial=266882 error=0 07:24:55 Received message from Master: op=Filter serial=266883 07:24:55 Color wheel filter change from 0 to 0 07:24:55 FLIGetFilterPos err=0 currentPosition=0 07:24:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:55 Filter is already there-color wheel unchanged 07:24:56 Received message from Master: op=Shutter serial=266884 07:24:56 Shutter LASER open 07:24:56 Received message from Camera: op=State serial=266886 07:24:56 GetSingleValue result=40 Value=cccccccc 07:24:56 SkyScan query 07:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:24:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:56 Parameters OK 07:24:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:56 Set A/D data flow result=40 07:24:56 Set A/D channel type result=40 07:24:56 Set A/D encoding result=40 07:24:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:56 Set channel filter=0.000000e+000 result=40 07:24:56 Config A/D Result=40 07:24:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:56 Get A/D filter: -9.255963e+061 result=40 07:24:56 Get A/D value=-858993460 result=40 07:24:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:56 Parameters OK 07:24:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:56 Set A/D data flow result=40 07:24:56 Set A/D channel type result=40 07:24:56 Set A/D encoding result=40 07:24:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:56 Set channel filter=0.000000e+000 result=40 07:24:56 Config A/D Result=40 07:24:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:56 Get A/D filter: -9.255963e+061 result=40 07:24:56 Get A/D value=-858993460 result=40 07:24:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:56 Aux= 07:24:56 Message to Camera, serial 266886 queued 07:25:05 Received message from Master: op=Shutter serial=266896 07:25:05 Shutter LASER close 07:25:05 Received message from Master: op=PointingHead serial=266900 07:25:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:25:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:25:06 Point started: ret=0 07:25:06 point_skyscan result=0 07:25:06 Check angles 07:25:06 SkyScan query 07:25:07 SkyScan query done: ret=0 az=89.64<-5976 ze=156.9<-1540 Statuses=0009 0009 07:25:07 Msec=0 True Az=89.64 Ze=156.9 Az status=0009 Ze status=0009 07:25:07 Check angles 07:25:07 SkyScan query 07:25:08 SkyScan query done: ret=0 az=72.075<-4805 ze=135.96<-2936 Statuses=0009 0009 07:25:08 Msec=750 True Az=72.075 Ze=135.96 Az status=0009 Ze status=0009 07:25:08 Check angles 07:25:08 SkyScan query 07:25:08 SkyScan query done: ret=0 az=54.735<-3649 ze=114.96<-4336 Statuses=0009 0009 07:25:08 Msec=1500 True Az=54.735 Ze=114.96 Az status=0009 Ze status=0009 07:25:09 Check angles 07:25:09 SkyScan query 07:25:09 SkyScan query done: ret=0 az=40.965<-2731 ze=93.57<-5762 Statuses=0009 0009 07:25:09 Msec=2250 True Az=40.965 Ze=93.57 Az status=0009 Ze status=0009 07:25:09 Check angles 07:25:09 SkyScan query 07:25:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.195<-7187 Statuses=0008 0009 07:25:10 Msec=3000 True Az=40.995 Ze=72.195 Az status=0008 Ze status=0009 07:25:10 Check angles 07:25:10 SkyScan query 07:25:11 SkyScan query done: ret=0 az=40.98<-2732 ze=52.125<-8525 Statuses=0008 0009 07:25:11 Msec=3750 True Az=40.98 Ze=52.125 Az status=0008 Ze status=0009 07:25:11 Check angles 07:25:11 SkyScan query 07:25:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:25:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:25:11 Message to Master queued w/err=0: serial=266900 error=0 07:25:16 Received message from Master: op=Filter serial=266901 07:25:16 Color wheel filter change from 0 to 0 07:25:16 FLIGetFilterPos err=0 currentPosition=0 07:25:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:16 Filter is already there-color wheel unchanged 07:25:17 Received message from Master: op=Shutter serial=266902 07:25:17 Shutter LASER close 07:25:17 Received message from Camera: op=State serial=266904 07:25:17 GetSingleValue result=40 Value=cccccccc 07:25:17 SkyScan query 07:25:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:25:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:17 Parameters OK [UTC 2018-12-19 07:25:17] 07:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:17 Set A/D data flow result=40 07:25:17 Set A/D channel type result=40 07:25:17 Set A/D encoding result=40 07:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:17 Set channel filter=0.000000e+000 result=40 07:25:17 Config A/D Result=40 07:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:17 Get A/D filter: -9.255963e+061 result=40 07:25:17 Get A/D value=-858993460 result=40 07:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:17 Parameters OK 07:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:17 Set A/D data flow result=40 07:25:17 Set A/D channel type result=40 07:25:17 Set A/D encoding result=40 07:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:17 Set channel filter=0.000000e+000 result=40 07:25:17 Config A/D Result=40 07:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:17 Get A/D filter: -9.255963e+061 result=40 07:25:17 Get A/D value=-858993460 result=40 07:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:17 Aux= 07:25:17 Message to Camera, serial 266904 queued 07:25:54 Received message from Master: op=PointingHead serial=266917 07:25:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:25:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:25:55 Point started: ret=0 07:25:55 point_skyscan result=0 07:25:56 Check angles 07:25:56 SkyScan query 07:25:56 SkyScan query done: ret=0 az=64.17<-4278 ze=81.6<-6560 Statuses=0009 0009 07:25:56 Msec=0 True Az=64.17 Ze=81.6 Az status=0009 Ze status=0009 07:25:56 Check angles 07:25:56 SkyScan query 07:25:57 SkyScan query done: ret=0 az=82.11<-5474 ze=102.945<-5137 Statuses=0009 0009 07:25:57 Msec=750 True Az=82.11 Ze=102.945 Az status=0009 Ze status=0009 07:25:57 Check angles 07:25:57 SkyScan query 07:25:58 SkyScan query done: ret=0 az=99.54<-6636 ze=123.945<-3737 Statuses=0009 0009 07:25:58 Msec=1500 True Az=99.54 Ze=123.945 Az status=0009 Ze status=0009 07:25:58 Check angles 07:25:58 SkyScan query 07:25:58 SkyScan query done: ret=0 az=116.985<-7799 ze=144.855<-2343 Statuses=0009 0009 07:25:58 Msec=2250 True Az=116.985 Ze=144.855 Az status=0009 Ze status=0009 07:25:59 Check angles 07:25:59 SkyScan query 07:25:59 SkyScan query done: ret=0 az=131.01<-8734 ze=165.825<-945 Statuses=0009 0009 07:25:59 Msec=3000 True Az=131.01 Ze=165.825 Az status=0009 Ze status=0009 07:25:59 Check angles 07:25:59 SkyScan query 07:26:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.205<-23547 Statuses=0008 0009 07:26:00 Msec=3750 True Az=130.995 Ze=-173.205 Az status=0008 Ze status=0009 07:26:00 Check angles 07:26:00 SkyScan query 07:26:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.845<-22123 Statuses=0008 0009 07:26:01 Msec=4500 True Az=130.995 Ze=-151.845 Az status=0008 Ze status=0009 07:26:01 Check angles 07:26:01 SkyScan query 07:26:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0008 07:26:01 Msec=5250 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0008 07:26:01 Message to Master queued w/err=0: serial=266917 error=0 07:26:06 Received message from Master: op=Filter serial=266918 07:26:06 Color wheel filter change from 0 to 0 07:26:06 FLIGetFilterPos err=0 currentPosition=0 07:26:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:06 Filter is already there-color wheel unchanged 07:26:07 Received message from Master: op=Shutter serial=266919 07:26:07 Shutter LASER close 07:26:07 Received message from Camera: op=State serial=266921 07:26:07 GetSingleValue result=40 Value=cccccccc 07:26:07 SkyScan query 07:26:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:26:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:07 Parameters OK 07:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:07 Set A/D data flow result=40 07:26:07 Set A/D channel type result=40 07:26:07 Set A/D encoding result=40 07:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:07 Set channel filter=0.000000e+000 result=40 07:26:07 Config A/D Result=40 07:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:07 Get A/D filter: -9.255963e+061 result=40 07:26:07 Get A/D value=-858993460 result=40 07:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:07 Parameters OK 07:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:07 Set A/D data flow result=40 07:26:07 Set A/D channel type result=40 07:26:07 Set A/D encoding result=40 07:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:07 Set channel filter=0.000000e+000 result=40 07:26:07 Config A/D Result=40 07:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:07 Get A/D filter: -9.255963e+061 result=40 07:26:07 Get A/D value=-858993460 result=40 07:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.479996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:07 Aux= 07:26:07 Message to Camera, serial 266921 queued 07:26:43 Received message from Master: op=PointingHead serial=266933 07:26:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:26:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:26:44 Point started: ret=0 07:26:44 point_skyscan result=0 07:26:44 Check angles 07:26:44 SkyScan query 07:26:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.42<-23428 Statuses=0009 0009 07:26:45 Msec=0 True Az=113.01 Ze=-171.42 Az status=0009 Ze status=0009 07:26:45 Check angles 07:26:45 SkyScan query 07:26:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:26:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:26:46 Message to Master queued w/err=0: serial=266933 error=0 07:26:51 Received message from Master: op=Filter serial=266934 07:26:51 Color wheel filter change from 0 to 0 07:26:51 FLIGetFilterPos err=0 currentPosition=0 07:26:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:51 Filter is already there-color wheel unchanged 07:26:51 Received message from Master: op=Shutter serial=266935 07:26:51 Shutter LASER open 07:26:51 Received message from Camera: op=State serial=266937 07:26:51 GetSingleValue result=40 Value=cccccccc 07:26:51 SkyScan query 07:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:26:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:52 Parameters OK 07:26:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:52 Set A/D data flow result=40 07:26:52 Set A/D channel type result=40 07:26:52 Set A/D encoding result=40 07:26:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:52 Set channel filter=0.000000e+000 result=40 07:26:52 Config A/D Result=40 07:26:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:52 Get A/D filter: -9.255963e+061 result=40 07:26:52 Get A/D value=-858993460 result=40 07:26:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:52 Parameters OK 07:26:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:52 Set A/D data flow result=40 07:26:52 Set A/D channel type result=40 07:26:52 Set A/D encoding result=40 07:26:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:52 Set channel filter=0.000000e+000 result=40 07:26:52 Config A/D Result=40 07:26:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:52 Get A/D filter: -9.255963e+061 result=40 07:26:52 Get A/D value=-858993460 result=40 07:26:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:52 Aux= 07:26:52 Message to Camera, serial 266937 queued 07:27:00 Received message from Master: op=Shutter serial=266947 07:27:00 Shutter LASER close 07:27:01 Received message from Master: op=PointingHead serial=266951 07:27:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:27:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:27:01 Point started: ret=0 07:27:01 point_skyscan result=0 07:27:02 Check angles 07:27:02 SkyScan query 07:27:02 SkyScan query done: ret=0 az=136.125<-9075 ze=-143.19<-21546 Statuses=0009 0009 07:27:02 Msec=0 True Az=136.125 Ze=-143.19 Az status=0009 Ze status=0009 07:27:02 Check angles 07:27:02 SkyScan query 07:27:03 SkyScan query done: ret=0 az=153.945<-10263 ze=-121.785<-20119 Statuses=0009 0009 07:27:03 Msec=750 True Az=153.945 Ze=-121.785 Az status=0009 Ze status=0009 07:27:03 Check angles 07:27:03 SkyScan query 07:27:04 SkyScan query done: ret=0 az=171.825<-11455 ze=-100.29<-18686 Statuses=0009 0009 07:27:04 Msec=1500 True Az=171.825 Ze=-100.29 Az status=0009 Ze status=0009 07:27:04 Check angles 07:27:04 SkyScan query 07:27:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.395<-17293 Statuses=0008 0009 07:27:05 Msec=2250 True Az=176.01 Ze=-79.395 Az status=0008 Ze status=0009 07:27:05 Check angles 07:27:05 SkyScan query 07:27:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.41<-15894 Statuses=0008 0009 07:27:05 Msec=3000 True Az=176.01 Ze=-58.41 Az status=0008 Ze status=0009 07:27:05 Check angles 07:27:05 SkyScan query 07:27:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:27:06 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:27:06 Message to Master queued w/err=0: serial=266951 error=0 07:27:11 Received message from Master: op=Filter serial=266952 07:27:11 Color wheel filter change from 0 to 0 07:27:11 FLIGetFilterPos err=0 currentPosition=0 07:27:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:11 Filter is already there-color wheel unchanged 07:27:11 Received message from Master: op=Shutter serial=266953 07:27:11 Shutter LASER close 07:27:11 Received message from Camera: op=State serial=266955 07:27:11 GetSingleValue result=40 Value=cccccccc 07:27:11 SkyScan query 07:27:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:27:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:12 Parameters OK 07:27:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:12 Set A/D data flow result=40 07:27:12 Set A/D channel type result=40 07:27:12 Set A/D encoding result=40 07:27:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:12 Set channel filter=0.000000e+000 result=40 07:27:12 Config A/D Result=40 07:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:12 Get A/D filter: -9.255963e+061 result=40 07:27:12 Get A/D value=-858993460 result=40 07:27:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:12 Parameters OK 07:27:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:12 Set A/D data flow result=40 07:27:12 Set A/D channel type result=40 07:27:12 Set A/D encoding result=40 07:27:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:12 Set channel filter=0.000000e+000 result=40 07:27:12 Config A/D Result=40 07:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:12 Get A/D filter: -9.255963e+061 result=40 07:27:12 Get A/D value=-858993460 result=40 07:27:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:12 Aux= 07:27:12 Message to Camera, serial 266955 queued 07:27:49 Received message from Master: op=PointingHead serial=266968 07:27:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:27:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:27:49 Point started: ret=0 07:27:49 point_skyscan result=0 07:27:50 Check angles 07:27:50 SkyScan query 07:27:50 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.675<-13445 Statuses=0009 0009 07:27:50 Msec=0 True Az=152.94 Ze=-21.675 Az status=0009 Ze status=0009 07:27:51 Check angles 07:27:51 SkyScan query 07:27:51 SkyScan query done: ret=0 az=135.03<-9002 ze=-0.21<-12014 Statuses=0009 0009 07:27:51 Msec=750 True Az=135.03 Ze=-0.21 Az status=0009 Ze status=0009 07:27:51 Check angles 07:27:51 SkyScan query 07:27:52 SkyScan query done: ret=0 az=117.585<-7839 ze=20.775<-10615 Statuses=0009 0009 07:27:52 Msec=1500 True Az=117.585 Ze=20.775 Az status=0009 Ze status=0009 07:27:52 Check angles 07:27:52 SkyScan query 07:27:53 SkyScan query done: ret=0 az=100.2<-6680 ze=41.685<-9221 Statuses=0009 0009 07:27:53 Msec=2250 True Az=100.2 Ze=41.685 Az status=0009 Ze status=0009 07:27:53 Check angles 07:27:53 SkyScan query 07:27:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 07:27:53 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 07:27:54 Check angles 07:27:54 SkyScan query 07:27:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:27:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:27:54 Message to Master queued w/err=0: serial=266968 error=0 07:27:59 Received message from Master: op=Filter serial=266969 07:27:59 Color wheel filter change from 0 to 0 07:27:59 FLIGetFilterPos err=0 currentPosition=0 07:27:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:59 Filter is already there-color wheel unchanged 07:27:59 Received message from Master: op=Shutter serial=266970 07:27:59 Shutter LASER close 07:27:59 Received message from Camera: op=State serial=266972 07:27:59 GetSingleValue result=40 Value=cccccccc 07:27:59 SkyScan query 07:28:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:28:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:00 Parameters OK 07:28:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:00 Set A/D data flow result=40 07:28:00 Set A/D channel type result=40 07:28:00 Set A/D encoding result=40 07:28:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:00 Set channel filter=0.000000e+000 result=40 07:28:00 Config A/D Result=40 07:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:00 Get A/D filter: -9.255963e+061 result=40 07:28:00 Get A/D value=-858993460 result=40 07:28:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:00 Parameters OK 07:28:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:00 Set A/D data flow result=40 07:28:00 Set A/D channel type result=40 07:28:00 Set A/D encoding result=40 07:28:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:00 Set channel filter=0.000000e+000 result=40 07:28:00 Config A/D Result=40 07:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:00 Get A/D filter: -9.255963e+061 result=40 07:28:00 Get A/D value=-858993460 result=40 07:28:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:00 Aux= 07:28:00 Message to Camera, serial 266972 queued 07:28:37 Received message from Master: op=PointingHead serial=266985 07:28:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:28:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:28:37 Point started: ret=0 07:28:37 point_skyscan result=0 07:28:38 Check angles 07:28:38 SkyScan query 07:28:39 SkyScan query done: ret=0 az=85.995<-5733 ze=21.945<-10537 Statuses=0008 0009 07:28:39 Msec=0 True Az=85.995 Ze=21.945 Az status=0008 Ze status=0009 07:28:39 Check angles 07:28:39 SkyScan query 07:28:39 SkyScan query done: ret=0 az=85.98<-5732 ze=1.05<-11930 Statuses=0008 0009 07:28:39 Msec=750 True Az=85.98 Ze=1.05 Az status=0008 Ze status=0009 07:28:40 Check angles 07:28:40 SkyScan query 07:28:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-19.905<-13327 Statuses=0008 0009 07:28:40 Msec=1500 True Az=85.995 Ze=-19.905 Az status=0008 Ze status=0009 07:28:40 Check angles 07:28:40 SkyScan query 07:28:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.845<-14723 Statuses=0008 0009 07:28:41 Msec=2250 True Az=85.995 Ze=-40.845 Az status=0008 Ze status=0009 07:28:41 Check angles 07:28:41 SkyScan query 07:28:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:28:42 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:28:42 Message to Master queued w/err=0: serial=266985 error=0 07:28:47 Received message from Master: op=Filter serial=266986 07:28:47 Color wheel filter change from 0 to 0 07:28:47 FLIGetFilterPos err=0 currentPosition=0 07:28:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:47 Filter is already there-color wheel unchanged 07:28:47 Received message from Master: op=Shutter serial=266987 07:28:47 Shutter LASER close 07:28:47 Received message from Camera: op=State serial=266989 07:28:47 GetSingleValue result=40 Value=cccccccc 07:28:47 SkyScan query 07:28:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:28:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:47 Parameters OK 07:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:47 Set A/D data flow result=40 07:28:47 Set A/D channel type result=40 07:28:47 Set A/D encoding result=40 07:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:47 Set channel filter=0.000000e+000 result=40 07:28:47 Config A/D Result=40 07:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:47 Get A/D filter: -9.255963e+061 result=40 07:28:47 Get A/D value=-858993460 result=40 07:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:47 Parameters OK 07:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:47 Set A/D data flow result=40 07:28:47 Set A/D channel type result=40 07:28:47 Set A/D encoding result=40 07:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:47 Set channel filter=0.000000e+000 result=40 07:28:47 Config A/D Result=40 07:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:47 Get A/D filter: -9.255963e+061 result=40 07:28:47 Get A/D value=-858993460 result=40 07:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:47 Aux= 07:28:47 Message to Camera, serial 266989 queued 07:29:24 Received message from Master: op=PointingHead serial=267002 07:29:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:29:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:29:25 Point started: ret=0 07:29:25 point_skyscan result=0 07:29:25 Check angles 07:29:25 SkyScan query 07:29:26 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.09<-17406 Statuses=0009 0009 07:29:26 Msec=0 True Az=108.81 Ze=-81.09 Az status=0009 Ze status=0009 07:29:26 Check angles 07:29:26 SkyScan query 07:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 07:29:27 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 07:29:27 Check angles 07:29:27 SkyScan query 07:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 07:29:27 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 07:29:28 Check angles 07:29:28 SkyScan query 07:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 07:29:28 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 07:29:28 Check angles 07:29:28 SkyScan query 07:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 07:29:29 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 07:29:29 Check angles 07:29:29 SkyScan query 07:29:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:29:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:29:30 Message to Master queued w/err=0: serial=267002 error=0 07:29:35 Received message from Master: op=Filter serial=267003 07:29:35 Color wheel filter change from 0 to 0 07:29:35 FLIGetFilterPos err=0 currentPosition=0 07:29:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:35 Filter is already there-color wheel unchanged 07:29:35 Received message from Master: op=Shutter serial=267004 07:29:35 Shutter LASER open 07:29:35 Received message from Camera: op=State serial=267006 07:29:35 GetSingleValue result=40 Value=cccccccc 07:29:35 SkyScan query 07:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:29:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:36 Parameters OK 07:29:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:36 Set A/D data flow result=40 07:29:36 Set A/D channel type result=40 07:29:36 Set A/D encoding result=40 07:29:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:36 Set channel filter=0.000000e+000 result=40 07:29:36 Config A/D Result=40 07:29:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:36 Get A/D filter: -9.255963e+061 result=40 07:29:36 Get A/D value=-858993460 result=40 07:29:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:36 Parameters OK 07:29:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:36 Set A/D data flow result=40 07:29:36 Set A/D channel type result=40 07:29:36 Set A/D encoding result=40 07:29:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:36 Set channel filter=0.000000e+000 result=40 07:29:36 Config A/D Result=40 07:29:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:36 Get A/D filter: -9.255963e+061 result=40 07:29:36 Get A/D value=-858993460 result=40 07:29:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:36 Aux= 07:29:36 Message to Camera, serial 267006 queued 07:29:44 Received message from Master: op=Shutter serial=267016 07:29:44 Shutter LASER close 07:29:45 Received message from Master: op=PointingHead serial=267020 07:29:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:29:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:29:45 Point started: ret=0 07:29:45 point_skyscan result=0 07:29:46 Check angles 07:29:46 SkyScan query 07:29:46 SkyScan query done: ret=0 az=89.655<-5977 ze=157.08<-1528 Statuses=0009 0009 07:29:46 Msec=0 True Az=89.655 Ze=157.08 Az status=0009 Ze status=0009 07:29:46 Check angles 07:29:46 SkyScan query 07:29:47 SkyScan query done: ret=0 az=72.255<-4817 ze=136.155<-2923 Statuses=0009 0009 07:29:47 Msec=750 True Az=72.255 Ze=136.155 Az status=0009 Ze status=0009 07:29:47 Check angles 07:29:47 SkyScan query 07:29:48 SkyScan query done: ret=0 az=54.81<-3654 ze=115.185<-4321 Statuses=0009 0009 07:29:48 Msec=1500 True Az=54.81 Ze=115.185 Az status=0009 Ze status=0009 07:29:48 Check angles 07:29:48 SkyScan query 07:29:48 SkyScan query done: ret=0 az=40.995<-2733 ze=94.245<-5717 Statuses=0009 0009 07:29:48 Msec=2250 True Az=40.995 Ze=94.245 Az status=0009 Ze status=0009 07:29:49 Check angles 07:29:49 SkyScan query 07:29:49 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 07:29:49 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 07:29:49 Check angles 07:29:49 SkyScan query 07:29:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 07:29:50 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 07:29:50 Check angles 07:29:50 SkyScan query 07:29:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:29:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:29:51 Message to Master queued w/err=0: serial=267020 error=0 07:29:56 Received message from Master: op=Filter serial=267021 07:29:56 Color wheel filter change from 0 to 0 07:29:56 FLIGetFilterPos err=0 currentPosition=0 07:29:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:56 Filter is already there-color wheel unchanged 07:29:56 Received message from Master: op=Shutter serial=267022 07:29:56 Shutter LASER close 07:29:56 Received message from Camera: op=State serial=267024 07:29:56 GetSingleValue result=40 Value=cccccccc 07:29:56 SkyScan query 07:29:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:29:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:57 Parameters OK 07:29:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:57 Set A/D data flow result=40 07:29:57 Set A/D channel type result=40 07:29:57 Set A/D encoding result=40 07:29:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:57 Set channel filter=0.000000e+000 result=40 07:29:57 Config A/D Result=40 07:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:57 Get A/D filter: -9.255963e+061 result=40 07:29:57 Get A/D value=-858993460 result=40 07:29:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:57 Parameters OK 07:29:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:57 Set A/D data flow result=40 07:29:57 Set A/D channel type result=40 07:29:57 Set A/D encoding result=40 07:29:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:57 Set channel filter=0.000000e+000 result=40 07:29:57 Config A/D Result=40 07:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:57 Get A/D filter: -9.255963e+061 result=40 07:29:57 Get A/D value=-858993460 result=40 07:29:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:57 Aux= 07:29:57 Message to Camera, serial 267024 queued 07:30:34 Received message from Master: op=PointingHead serial=267037 07:30:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:30:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:30:34 Point started: ret=0 07:30:34 point_skyscan result=0 07:30:35 Check angles 07:30:35 SkyScan query 07:30:36 SkyScan query done: ret=0 az=64.185<-4279 ze=81.63<-6558 Statuses=0009 0009 07:30:36 Msec=0 True Az=64.185 Ze=81.63 Az status=0009 Ze status=0009 07:30:36 Check angles 07:30:36 SkyScan query 07:30:36 SkyScan query done: ret=0 az=82.125<-5475 ze=102.96<-5136 Statuses=0009 0009 07:30:36 Msec=750 True Az=82.125 Ze=102.96 Az status=0009 Ze status=0009 07:30:36 Check angles 07:30:36 SkyScan query 07:30:37 SkyScan query done: ret=0 az=99.585<-6639 ze=123.945<-3737 Statuses=0009 0009 07:30:37 Msec=1500 True Az=99.585 Ze=123.945 Az status=0009 Ze status=0009 07:30:37 Check angles 07:30:37 SkyScan query 07:30:38 SkyScan query done: ret=0 az=117.45<-7830 ze=145.35<-2310 Statuses=0009 0009 07:30:38 Msec=2250 True Az=117.45 Ze=145.35 Az status=0009 Ze status=0009 07:30:38 Check angles 07:30:38 SkyScan query 07:30:39 SkyScan query done: ret=0 az=131.01<-8734 ze=166.725<-885 Statuses=0009 0009 07:30:39 Msec=3000 True Az=131.01 Ze=166.725 Az status=0009 Ze status=0009 07:30:39 Check angles 07:30:39 SkyScan query 07:30:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-171.93<-23462 Statuses=0008 0009 07:30:39 Msec=3750 True Az=130.995 Ze=-171.93 Az status=0008 Ze status=0009 07:30:40 Check angles 07:30:40 SkyScan query 07:30:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-150.915<-22061 Statuses=0008 0009 07:30:40 Msec=4500 True Az=130.995 Ze=-150.915 Az status=0008 Ze status=0009 07:30:40 Check angles 07:30:40 SkyScan query 07:30:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.45<-21430 Statuses=0008 0008 07:30:41 Msec=5250 True Az=130.995 Ze=-141.45 Az status=0008 Ze status=0008 07:30:41 Message to Master queued w/err=0: serial=267037 error=0 07:30:46 Received message from Master: op=Filter serial=267038 07:30:46 Color wheel filter change from 0 to 0 07:30:46 FLIGetFilterPos err=0 currentPosition=0 07:30:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:46 Filter is already there-color wheel unchanged 07:30:46 Received message from Master: op=Shutter serial=267039 07:30:46 Shutter LASER close 07:30:46 Received message from Camera: op=State serial=267041 07:30:46 GetSingleValue result=40 Value=cccccccc 07:30:46 SkyScan query 07:30:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:30:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:47 Parameters OK 07:30:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:47 Set A/D data flow result=40 07:30:47 Set A/D channel type result=40 07:30:47 Set A/D encoding result=40 07:30:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:47 Set channel filter=0.000000e+000 result=40 07:30:47 Config A/D Result=40 07:30:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:47 Get A/D filter: -9.255963e+061 result=40 07:30:47 Get A/D value=-858993460 result=40 07:30:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:47 Parameters OK 07:30:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:47 Set A/D data flow result=40 07:30:47 Set A/D channel type result=40 07:30:47 Set A/D encoding result=40 07:30:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:47 Set channel filter=0.000000e+000 result=40 07:30:47 Config A/D Result=40 07:30:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:47 Get A/D filter: -9.255963e+061 result=40 07:30:47 Get A/D value=-858993460 result=40 07:30:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:47 Aux= 07:30:47 Message to Camera, serial 267041 queued 07:31:23 Received message from Master: op=PointingHead serial=267054 07:31:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:31:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:31:24 Point started: ret=0 07:31:24 point_skyscan result=0 07:31:25 Check angles 07:31:25 SkyScan query 07:31:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 07:31:25 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 07:31:25 Check angles 07:31:25 SkyScan query 07:31:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:31:26 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:31:26 Message to Master queued w/err=0: serial=267054 error=0 07:31:31 Received message from Master: op=Filter serial=267055 07:31:31 Color wheel filter change from 0 to 0 07:31:31 FLIGetFilterPos err=0 currentPosition=0 07:31:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:31 Filter is already there-color wheel unchanged 07:31:31 Received message from Master: op=Shutter serial=267056 07:31:31 Shutter LASER open 07:31:31 Received message from Camera: op=State serial=267058 07:31:31 GetSingleValue result=40 Value=cccccccc 07:31:31 SkyScan query 07:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:31:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:32 Parameters OK 07:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:32 Set A/D data flow result=40 07:31:32 Set A/D channel type result=40 07:31:32 Set A/D encoding result=40 07:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:32 Set channel filter=0.000000e+000 result=40 07:31:32 Config A/D Result=40 07:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:32 Get A/D filter: -9.255963e+061 result=40 07:31:32 Get A/D value=-858993460 result=40 07:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:32 Parameters OK 07:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:32 Set A/D data flow result=40 07:31:32 Set A/D channel type result=40 07:31:32 Set A/D encoding result=40 07:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:32 Set channel filter=0.000000e+000 result=40 07:31:32 Config A/D Result=40 07:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:32 Get A/D filter: -9.255963e+061 result=40 07:31:32 Get A/D value=-858993460 result=40 07:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:32 Aux= 07:31:32 Message to Camera, serial 267058 queued 07:31:40 Received message from Master: op=Shutter serial=267068 07:31:40 Shutter LASER close 07:31:41 Received message from Master: op=PointingHead serial=267072 07:31:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:31:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:31:41 Point started: ret=0 07:31:41 point_skyscan result=0 07:31:42 Check angles 07:31:42 SkyScan query 07:31:43 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.845<-21523 Statuses=0009 0009 07:31:43 Msec=0 True Az=136.305 Ze=-142.845 Az status=0009 Ze status=0009 07:31:43 Check angles 07:31:43 SkyScan query 07:31:43 SkyScan query done: ret=0 az=153.915<-10261 ze=-121.845<-20123 Statuses=0009 0009 07:31:43 Msec=750 True Az=153.915 Ze=-121.845 Az status=0009 Ze status=0009 07:31:44 Check angles 07:31:44 SkyScan query 07:31:44 SkyScan query done: ret=0 az=171.345<-11423 ze=-100.86<-18724 Statuses=0009 0009 07:31:44 Msec=1500 True Az=171.345 Ze=-100.86 Az status=0009 Ze status=0009 07:31:44 Check angles 07:31:44 SkyScan query 07:31:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.965<-17331 Statuses=0008 0009 07:31:45 Msec=2250 True Az=176.01 Ze=-79.965 Az status=0008 Ze status=0009 07:31:45 Check angles 07:31:45 SkyScan query 07:31:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.965<-15931 Statuses=0008 0009 07:31:46 Msec=3000 True Az=175.995 Ze=-58.965 Az status=0008 Ze status=0009 07:31:46 Check angles 07:31:46 SkyScan query 07:31:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:31:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:31:46 Message to Master queued w/err=0: serial=267072 error=0 07:31:51 Received message from Master: op=Filter serial=267073 07:31:51 Color wheel filter change from 0 to 0 07:31:51 FLIGetFilterPos err=0 currentPosition=0 07:31:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:51 Filter is already there-color wheel unchanged 07:31:52 Received message from Master: op=Shutter serial=267074 07:31:52 Shutter LASER close 07:31:52 Received message from Camera: op=State serial=267076 07:31:52 GetSingleValue result=40 Value=cccccccc 07:31:52 SkyScan query 07:31:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:31:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:52 Parameters OK 07:31:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:52 Set A/D data flow result=40 07:31:52 Set A/D channel type result=40 07:31:52 Set A/D encoding result=40 07:31:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:52 Set channel filter=0.000000e+000 result=40 07:31:52 Config A/D Result=40 07:31:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:52 Get A/D filter: -9.255963e+061 result=40 07:31:52 Get A/D value=-858993460 result=40 07:31:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:52 Parameters OK 07:31:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:52 Set A/D data flow result=40 07:31:52 Set A/D channel type result=40 07:31:52 Set A/D encoding result=40 07:31:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:52 Set channel filter=0.000000e+000 result=40 07:31:52 Config A/D Result=40 07:31:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:52 Get A/D filter: -9.255963e+061 result=40 07:31:52 Get A/D value=-858993460 result=40 07:31:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:52 Aux= 07:31:52 Message to Camera, serial 267076 queued 07:32:29 Received message from Master: op=PointingHead serial=267089 07:32:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:32:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:32:29 Point started: ret=0 07:32:29 point_skyscan result=0 07:32:30 Check angles 07:32:30 SkyScan query 07:32:31 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.675<-13445 Statuses=0009 0009 07:32:31 Msec=0 True Az=152.985 Ze=-21.675 Az status=0009 Ze status=0009 07:32:31 Check angles 07:32:31 SkyScan query 07:32:32 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.66<-12044 Statuses=0009 0009 07:32:32 Msec=750 True Az=135.375 Ze=-0.66 Az status=0009 Ze status=0009 07:32:32 Check angles 07:32:32 SkyScan query 07:32:32 SkyScan query done: ret=0 az=117.855<-7857 ze=20.25<-10650 Statuses=0009 0009 07:32:32 Msec=1500 True Az=117.855 Ze=20.25 Az status=0009 Ze status=0009 07:32:32 Check angles 07:32:32 SkyScan query 07:32:33 SkyScan query done: ret=0 az=100.545<-6703 ze=41.265<-9249 Statuses=0009 0009 07:32:33 Msec=2250 True Az=100.545 Ze=41.265 Az status=0009 Ze status=0009 07:32:33 Check angles 07:32:33 SkyScan query 07:32:34 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 07:32:34 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 07:32:34 Check angles 07:32:34 SkyScan query 07:32:35 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 07:32:35 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 07:32:35 Message to Master queued w/err=0: serial=267089 error=0 07:32:40 Received message from Master: op=Filter serial=267090 07:32:40 Color wheel filter change from 0 to 0 07:32:40 FLIGetFilterPos err=0 currentPosition=0 07:32:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:40 Filter is already there-color wheel unchanged 07:32:40 Received message from Master: op=Shutter serial=267091 07:32:40 Shutter LASER close 07:32:40 Received message from Camera: op=State serial=267093 07:32:40 GetSingleValue result=40 Value=cccccccc 07:32:40 SkyScan query 07:32:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:32:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:40 Parameters OK 07:32:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:40 Set A/D data flow result=40 07:32:40 Set A/D channel type result=40 07:32:40 Set A/D encoding result=40 07:32:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:40 Set channel filter=0.000000e+000 result=40 07:32:40 Config A/D Result=40 07:32:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:40 Get A/D filter: -9.255963e+061 result=40 07:32:40 Get A/D value=-858993460 result=40 07:32:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:40 Parameters OK 07:32:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:40 Set A/D data flow result=40 07:32:40 Set A/D channel type result=40 07:32:40 Set A/D encoding result=40 07:32:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:40 Set channel filter=0.000000e+000 result=40 07:32:40 Config A/D Result=40 07:32:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:40 Get A/D filter: -9.255963e+061 result=40 07:32:40 Get A/D value=-858993460 result=40 07:32:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:40 Aux= 07:32:40 Message to Camera, serial 267093 queued 07:33:17 Received message from Master: op=PointingHead serial=267106 07:33:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:33:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:33:18 Point started: ret=0 07:33:18 point_skyscan result=0 07:33:18 Check angles 07:33:18 SkyScan query 07:33:19 SkyScan query done: ret=0 az=85.995<-5733 ze=21.54<-10564 Statuses=0008 0009 07:33:19 Msec=0 True Az=85.995 Ze=21.54 Az status=0008 Ze status=0009 07:33:19 Check angles 07:33:19 SkyScan query 07:33:20 SkyScan query done: ret=0 az=86.01<-5734 ze=0.165<-11989 Statuses=0008 0009 07:33:20 Msec=750 True Az=86.01 Ze=0.165 Az status=0008 Ze status=0009 07:33:20 Check angles 07:33:20 SkyScan query 07:33:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.805<-13387 Statuses=0008 0009 07:33:20 Msec=1500 True Az=85.995 Ze=-20.805 Az status=0008 Ze status=0009 07:33:21 Check angles 07:33:21 SkyScan query 07:33:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.225<-14815 Statuses=0008 0009 07:33:21 Msec=2250 True Az=85.995 Ze=-42.225 Az status=0008 Ze status=0009 07:33:21 Check angles 07:33:21 SkyScan query 07:33:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:33:22 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:33:22 Message to Master queued w/err=0: serial=267106 error=0 07:33:27 Received message from Master: op=Filter serial=267107 07:33:27 Color wheel filter change from 0 to 0 07:33:27 FLIGetFilterPos err=0 currentPosition=0 07:33:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:27 Filter is already there-color wheel unchanged 07:33:27 Received message from Master: op=Shutter serial=267108 07:33:27 Shutter LASER close 07:33:27 Received message from Camera: op=State serial=267110 07:33:27 GetSingleValue result=40 Value=cccccccc 07:33:27 SkyScan query 07:33:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:33:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:28 Parameters OK 07:33:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:28 Set A/D data flow result=40 07:33:28 Set A/D channel type result=40 07:33:28 Set A/D encoding result=40 07:33:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:28 Set channel filter=0.000000e+000 result=40 07:33:28 Config A/D Result=40 07:33:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:28 Get A/D filter: -9.255963e+061 result=40 07:33:28 Get A/D value=-858993460 result=40 07:33:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:28 Parameters OK 07:33:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:28 Set A/D data flow result=40 07:33:28 Set A/D channel type result=40 07:33:28 Set A/D encoding result=40 07:33:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:28 Set channel filter=0.000000e+000 result=40 07:33:28 Config A/D Result=40 07:33:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:28 Get A/D filter: -9.255963e+061 result=40 07:33:28 Get A/D value=-858993460 result=40 07:33:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:28 Aux= 07:33:28 Message to Camera, serial 267110 queued 07:34:05 Received message from Master: op=PointingHead serial=267123 07:34:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:34:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:34:05 Point started: ret=0 07:34:05 point_skyscan result=0 07:34:06 Check angles 07:34:06 SkyScan query 07:34:06 SkyScan query done: ret=0 az=109.575<-7305 ze=-81.87<-17458 Statuses=0009 0009 07:34:06 Msec=0 True Az=109.575 Ze=-81.87 Az status=0009 Ze status=0009 07:34:06 Check angles 07:34:06 SkyScan query 07:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 07:34:07 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 07:34:07 Check angles 07:34:07 SkyScan query 07:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.185<-20279 Statuses=0008 0009 07:34:08 Msec=1500 True Az=112.995 Ze=-124.185 Az status=0008 Ze status=0009 07:34:08 Check angles 07:34:08 SkyScan query 07:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.635<-21709 Statuses=0008 0009 07:34:09 Msec=2250 True Az=112.995 Ze=-145.635 Az status=0008 Ze status=0009 07:34:09 Check angles 07:34:09 SkyScan query 07:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.995<-23133 Statuses=0008 0009 07:34:09 Msec=3000 True Az=112.995 Ze=-166.995 Az status=0008 Ze status=0009 07:34:10 Check angles 07:34:10 SkyScan query 07:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:34:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:34:10 Message to Master queued w/err=0: serial=267123 error=0 07:34:15 Received message from Master: op=Filter serial=267124 07:34:15 Color wheel filter change from 0 to 0 07:34:15 FLIGetFilterPos err=0 currentPosition=0 07:34:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:15 Filter is already there-color wheel unchanged 07:34:15 Received message from Master: op=Shutter serial=267125 07:34:15 Shutter LASER open 07:34:15 Received message from Camera: op=State serial=267127 07:34:15 GetSingleValue result=40 Value=cccccccc 07:34:15 SkyScan query 07:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:34:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:16 Parameters OK 07:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:16 Set A/D data flow result=40 07:34:16 Set A/D channel type result=40 07:34:16 Set A/D encoding result=40 07:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:16 Set channel filter=0.000000e+000 result=40 07:34:16 Config A/D Result=40 07:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:16 Get A/D filter: -9.255963e+061 result=40 07:34:16 Get A/D value=-858993460 result=40 07:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:16 Parameters OK 07:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:16 Set A/D data flow result=40 07:34:16 Set A/D channel type result=40 07:34:16 Set A/D encoding result=40 07:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:16 Set channel filter=0.000000e+000 result=40 07:34:16 Config A/D Result=40 07:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:16 Get A/D filter: -9.255963e+061 result=40 07:34:16 Get A/D value=-858993460 result=40 07:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:16 Aux= 07:34:16 Message to Camera, serial 267127 queued 07:34:24 Received message from Master: op=Shutter serial=267137 07:34:24 Shutter LASER close 07:34:25 Received message from Master: op=PointingHead serial=267141 07:34:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:34:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:34:25 Point started: ret=0 07:34:25 point_skyscan result=0 07:34:26 Check angles 07:34:26 SkyScan query 07:34:27 SkyScan query done: ret=0 az=90.15<-6010 ze=157.47<-1502 Statuses=0009 0009 07:34:27 Msec=0 True Az=90.15 Ze=157.47 Az status=0009 Ze status=0009 07:34:27 Check angles 07:34:27 SkyScan query 07:34:27 SkyScan query done: ret=0 az=72.255<-4817 ze=136.125<-2925 Statuses=0009 0009 07:34:27 Msec=750 True Az=72.255 Ze=136.125 Az status=0009 Ze status=0009 07:34:28 Check angles 07:34:28 SkyScan query 07:34:28 SkyScan query done: ret=0 az=54.465<-3631 ze=114.645<-4357 Statuses=0009 0009 07:34:28 Msec=1500 True Az=54.465 Ze=114.645 Az status=0009 Ze status=0009 07:34:28 Check angles 07:34:28 SkyScan query 07:34:29 SkyScan query done: ret=0 az=40.98<-2732 ze=93.735<-5751 Statuses=0009 0009 07:34:29 Msec=2250 True Az=40.98 Ze=93.735 Az status=0009 Ze status=0009 07:34:29 Check angles 07:34:29 SkyScan query 07:34:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.345<-7177 Statuses=0008 0009 07:34:30 Msec=3000 True Az=40.995 Ze=72.345 Az status=0008 Ze status=0009 07:34:30 Check angles 07:34:30 SkyScan query 07:34:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.02<-8532 Statuses=0008 0009 07:34:30 Msec=3750 True Az=40.995 Ze=52.02 Az status=0008 Ze status=0009 07:34:31 Check angles 07:34:31 SkyScan query 07:34:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:34:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:34:31 Message to Master queued w/err=0: serial=267141 error=0 07:34:36 Received message from Master: op=Filter serial=267142 07:34:36 Color wheel filter change from 0 to 0 07:34:36 FLIGetFilterPos err=0 currentPosition=0 07:34:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:36 Filter is already there-color wheel unchanged 07:34:36 Received message from Master: op=Shutter serial=267143 07:34:36 Shutter LASER close 07:34:37 Received message from Camera: op=State serial=267145 07:34:37 GetSingleValue result=40 Value=cccccccc 07:34:37 SkyScan query 07:34:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:34:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:37 Parameters OK 07:34:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:37 Set A/D data flow result=40 07:34:37 Set A/D channel type result=40 07:34:37 Set A/D encoding result=40 07:34:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:37 Set channel filter=0.000000e+000 result=40 07:34:37 Config A/D Result=40 07:34:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:37 Get A/D filter: -9.255963e+061 result=40 07:34:37 Get A/D value=-858993460 result=40 07:34:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:37 Parameters OK [UTC 2018-12-19 07:34:37] 07:34:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:37 Set A/D data flow result=40 07:34:37 Set A/D channel type result=40 07:34:37 Set A/D encoding result=40 07:34:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:37 Set channel filter=0.000000e+000 result=40 07:34:37 Config A/D Result=40 07:34:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:37 Get A/D filter: -9.255963e+061 result=40 07:34:37 Get A/D value=-858993460 result=40 07:34:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:37 Aux= 07:34:37 Message to Camera, serial 267145 queued 07:35:14 Received message from Master: op=PointingHead serial=267158 07:35:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:35:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:35:15 Point started: ret=0 07:35:15 point_skyscan result=0 07:35:15 Check angles 07:35:15 SkyScan query 07:35:16 SkyScan query done: ret=0 az=64.17<-4278 ze=81.48<-6568 Statuses=0009 0009 07:35:16 Msec=0 True Az=64.17 Ze=81.48 Az status=0009 Ze status=0009 07:35:16 Check angles 07:35:16 SkyScan query 07:35:17 SkyScan query done: ret=0 az=82.095<-5473 ze=102.84<-5144 Statuses=0009 0009 07:35:17 Msec=750 True Az=82.095 Ze=102.84 Az status=0009 Ze status=0009 07:35:17 Check angles 07:35:17 SkyScan query 07:35:17 SkyScan query done: ret=0 az=99.51<-6634 ze=123.81<-3746 Statuses=0009 0009 07:35:17 Msec=1500 True Az=99.51 Ze=123.81 Az status=0009 Ze status=0009 07:35:18 Check angles 07:35:18 SkyScan query 07:35:18 SkyScan query done: ret=0 az=116.925<-7795 ze=144.765<-2349 Statuses=0009 0009 07:35:18 Msec=2250 True Az=116.925 Ze=144.765 Az status=0009 Ze status=0009 07:35:18 Check angles 07:35:18 SkyScan query 07:35:19 SkyScan query done: ret=0 az=131.01<-8734 ze=165.75<-950 Statuses=0009 0009 07:35:19 Msec=3000 True Az=131.01 Ze=165.75 Az status=0009 Ze status=0009 07:35:19 Check angles 07:35:19 SkyScan query 07:35:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-172.845<-23523 Statuses=0008 0009 07:35:20 Msec=3750 True Az=130.995 Ze=-172.845 Az status=0008 Ze status=0009 07:35:20 Check angles 07:35:20 SkyScan query 07:35:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.5<-22100 Statuses=0008 0009 07:35:20 Msec=4500 True Az=130.995 Ze=-151.5 Az status=0008 Ze status=0009 07:35:21 Check angles 07:35:21 SkyScan query 07:35:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.45<-21430 Statuses=0008 0008 07:35:21 Msec=5250 True Az=130.995 Ze=-141.45 Az status=0008 Ze status=0008 07:35:21 Message to Master queued w/err=0: serial=267158 error=0 07:35:26 Received message from Master: op=Filter serial=267159 07:35:26 Color wheel filter change from 0 to 0 07:35:26 FLIGetFilterPos err=0 currentPosition=0 07:35:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:26 Filter is already there-color wheel unchanged 07:35:26 Received message from Master: op=Shutter serial=267160 07:35:26 Shutter LASER close 07:35:26 Received message from Camera: op=State serial=267162 07:35:26 GetSingleValue result=40 Value=cccccccc 07:35:26 SkyScan query 07:35:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:35:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:27 Parameters OK 07:35:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:27 Set A/D data flow result=40 07:35:27 Set A/D channel type result=40 07:35:27 Set A/D encoding result=40 07:35:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:27 Set channel filter=0.000000e+000 result=40 07:35:27 Config A/D Result=40 07:35:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:27 Get A/D filter: -9.255963e+061 result=40 07:35:27 Get A/D value=-858993460 result=40 07:35:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:27 Parameters OK 07:35:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:27 Set A/D data flow result=40 07:35:27 Set A/D channel type result=40 07:35:27 Set A/D encoding result=40 07:35:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:27 Set channel filter=0.000000e+000 result=40 07:35:27 Config A/D Result=40 07:35:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:27 Get A/D filter: -9.255963e+061 result=40 07:35:27 Get A/D value=-858993460 result=40 07:35:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:27 Aux= 07:35:27 Message to Camera, serial 267162 queued [UTC 2018-12-19 07:35:52] 07:36:04 Received message from Master: op=PointingHead serial=267175 07:36:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:36:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:36:04 Point started: ret=0 07:36:04 point_skyscan result=0 07:36:05 Check angles 07:36:05 SkyScan query 07:36:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0009 0009 07:36:06 Msec=0 True Az=112.995 Ze=-171.495 Az status=0009 Ze status=0009 07:36:06 Check angles 07:36:06 SkyScan query 07:36:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:36:06 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:36:06 Message to Master queued w/err=0: serial=267175 error=0 07:36:11 Received message from Master: op=Filter serial=267176 07:36:11 Color wheel filter change from 0 to 0 07:36:11 FLIGetFilterPos err=0 currentPosition=0 07:36:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:11 Filter is already there-color wheel unchanged 07:36:11 Received message from Master: op=Shutter serial=267177 07:36:11 Shutter LASER open 07:36:12 Received message from Camera: op=State serial=267179 07:36:12 GetSingleValue result=40 Value=cccccccc 07:36:12 SkyScan query 07:36:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:36:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:12 Parameters OK 07:36:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:12 Set A/D data flow result=40 07:36:12 Set A/D channel type result=40 07:36:12 Set A/D encoding result=40 07:36:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:12 Set channel filter=0.000000e+000 result=40 07:36:12 Config A/D Result=40 07:36:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:12 Get A/D filter: -9.255963e+061 result=40 07:36:12 Get A/D value=-858993460 result=40 07:36:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:12 Parameters OK 07:36:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:12 Set A/D data flow result=40 07:36:12 Set A/D channel type result=40 07:36:12 Set A/D encoding result=40 07:36:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:12 Set channel filter=0.000000e+000 result=40 07:36:12 Config A/D Result=40 07:36:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:12 Get A/D filter: -9.255963e+061 result=40 07:36:12 Get A/D value=-858993460 result=40 07:36:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-173.009995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:12 Aux= 07:36:12 Message to Camera, serial 267179 queued 07:36:21 Received message from Master: op=Shutter serial=267189 07:36:21 Shutter LASER close 07:36:21 Received message from Master: op=PointingHead serial=267193 07:36:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:36:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:36:22 Point started: ret=0 07:36:22 point_skyscan result=0 07:36:22 Check angles 07:36:22 SkyScan query 07:36:23 SkyScan query done: ret=0 az=136.455<-9097 ze=-142.77<-21518 Statuses=0009 0009 07:36:23 Msec=0 True Az=136.455 Ze=-142.77 Az status=0009 Ze status=0009 07:36:23 Check angles 07:36:23 SkyScan query 07:36:24 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.785<-20119 Statuses=0009 0009 07:36:24 Msec=750 True Az=153.96 Ze=-121.785 Az status=0009 Ze status=0009 07:36:24 Check angles 07:36:24 SkyScan query 07:36:24 SkyScan query done: ret=0 az=171.84<-11456 ze=-100.29<-18686 Statuses=0009 0009 07:36:24 Msec=1500 True Az=171.84 Ze=-100.29 Az status=0009 Ze status=0009 07:36:25 Check angles 07:36:25 SkyScan query 07:36:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.395<-17293 Statuses=0008 0009 07:36:25 Msec=2250 True Az=176.01 Ze=-79.395 Az status=0008 Ze status=0009 07:36:25 Check angles 07:36:25 SkyScan query 07:36:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.41<-15894 Statuses=0008 0009 07:36:26 Msec=3000 True Az=176.01 Ze=-58.41 Az status=0008 Ze status=0009 07:36:26 Check angles 07:36:26 SkyScan query 07:36:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:36:27 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:36:27 Message to Master queued w/err=0: serial=267193 error=0 07:36:32 Received message from Master: op=Filter serial=267194 07:36:32 Color wheel filter change from 0 to 0 07:36:32 FLIGetFilterPos err=0 currentPosition=0 07:36:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:32 Filter is already there-color wheel unchanged 07:36:32 Received message from Master: op=Shutter serial=267195 07:36:32 Shutter LASER close 07:36:32 Received message from Camera: op=State serial=267197 07:36:32 GetSingleValue result=40 Value=cccccccc 07:36:32 SkyScan query 07:36:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:36:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:33 Parameters OK 07:36:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:33 Set A/D data flow result=40 07:36:33 Set A/D channel type result=40 07:36:33 Set A/D encoding result=40 07:36:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:33 Set channel filter=0.000000e+000 result=40 07:36:33 Config A/D Result=40 07:36:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:33 Get A/D filter: -9.255963e+061 result=40 07:36:33 Get A/D value=-858993460 result=40 07:36:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:33 Parameters OK 07:36:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:33 Set A/D data flow result=40 07:36:33 Set A/D channel type result=40 07:36:33 Set A/D encoding result=40 07:36:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:33 Set channel filter=0.000000e+000 result=40 07:36:33 Config A/D Result=40 07:36:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:33 Get A/D filter: -9.255963e+061 result=40 07:36:33 Get A/D value=-858993460 result=40 07:36:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:33 Aux= 07:36:33 Message to Camera, serial 267197 queued 07:37:09 Received message from Master: op=PointingHead serial=267210 07:37:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:37:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:37:10 Point started: ret=0 07:37:10 point_skyscan result=0 07:37:11 Check angles 07:37:11 SkyScan query 07:37:11 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.405<-13427 Statuses=0009 0009 07:37:11 Msec=0 True Az=152.76 Ze=-21.405 Az status=0009 Ze status=0009 07:37:11 Check angles 07:37:11 SkyScan query 07:37:12 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.435<-12029 Statuses=0009 0009 07:37:12 Msec=750 True Az=135.135 Ze=-0.435 Az status=0009 Ze status=0009 07:37:12 Check angles 07:37:12 SkyScan query 07:37:13 SkyScan query done: ret=0 az=117.795<-7853 ze=20.505<-10633 Statuses=0009 0009 07:37:13 Msec=1500 True Az=117.795 Ze=20.505 Az status=0009 Ze status=0009 07:37:13 Check angles 07:37:13 SkyScan query 07:37:13 SkyScan query done: ret=0 az=100.305<-6687 ze=41.475<-9235 Statuses=0009 0009 07:37:13 Msec=2250 True Az=100.305 Ze=41.475 Az status=0009 Ze status=0009 07:37:14 Check angles 07:37:14 SkyScan query 07:37:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 07:37:14 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 07:37:14 Check angles 07:37:14 SkyScan query 07:37:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:37:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:37:15 Message to Master queued w/err=0: serial=267210 error=0 07:37:20 Received message from Master: op=Filter serial=267211 07:37:20 Color wheel filter change from 0 to 0 07:37:20 FLIGetFilterPos err=0 currentPosition=0 07:37:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:20 Filter is already there-color wheel unchanged 07:37:20 Received message from Master: op=Shutter serial=267212 07:37:20 Shutter LASER close 07:37:20 Received message from Camera: op=State serial=267214 07:37:20 GetSingleValue result=40 Value=cccccccc 07:37:20 SkyScan query 07:37:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:37:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:21 Parameters OK 07:37:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:21 Set A/D data flow result=40 07:37:21 Set A/D channel type result=40 07:37:21 Set A/D encoding result=40 07:37:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:21 Set channel filter=0.000000e+000 result=40 07:37:21 Config A/D Result=40 07:37:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:21 Get A/D filter: -9.255963e+061 result=40 07:37:21 Get A/D value=-858993460 result=40 07:37:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:21 Parameters OK 07:37:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:21 Set A/D data flow result=40 07:37:21 Set A/D channel type result=40 07:37:21 Set A/D encoding result=40 07:37:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:21 Set channel filter=0.000000e+000 result=40 07:37:21 Config A/D Result=40 07:37:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:21 Get A/D filter: -9.255963e+061 result=40 07:37:21 Get A/D value=-858993460 result=40 07:37:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:21 Aux= 07:37:21 Message to Camera, serial 267214 queued 07:37:58 Received message from Master: op=PointingHead serial=267227 07:37:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:37:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:37:58 Point started: ret=0 07:37:58 point_skyscan result=0 07:37:59 Check angles 07:37:59 SkyScan query 07:37:59 SkyScan query done: ret=0 az=85.995<-5733 ze=21.165<-10589 Statuses=0008 0009 07:37:59 Msec=0 True Az=85.995 Ze=21.165 Az status=0008 Ze status=0009 07:38:00 Check angles 07:38:00 SkyScan query 07:38:00 SkyScan query done: ret=0 az=86.01<-5734 ze=0.225<-11985 Statuses=0008 0009 07:38:00 Msec=750 True Az=86.01 Ze=0.225 Az status=0008 Ze status=0009 07:38:00 Check angles 07:38:00 SkyScan query 07:38:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.76<-13384 Statuses=0008 0009 07:38:01 Msec=1500 True Az=85.995 Ze=-20.76 Az status=0008 Ze status=0009 07:38:01 Check angles 07:38:01 SkyScan query 07:38:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.7<-14780 Statuses=0008 0009 07:38:02 Msec=2250 True Az=85.995 Ze=-41.7 Az status=0008 Ze status=0009 07:38:02 Check angles 07:38:02 SkyScan query 07:38:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:38:02 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:38:02 Message to Master queued w/err=0: serial=267227 error=0 07:38:07 Received message from Master: op=Filter serial=267228 07:38:07 Color wheel filter change from 0 to 0 07:38:07 FLIGetFilterPos err=0 currentPosition=0 07:38:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:07 Filter is already there-color wheel unchanged 07:38:08 Received message from Master: op=Shutter serial=267229 07:38:08 Shutter LASER close 07:38:08 Received message from Camera: op=State serial=267231 07:38:08 GetSingleValue result=40 Value=cccccccc 07:38:08 SkyScan query 07:38:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:38:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:08 Parameters OK 07:38:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:08 Set A/D data flow result=40 07:38:08 Set A/D channel type result=40 07:38:08 Set A/D encoding result=40 07:38:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:08 Set channel filter=0.000000e+000 result=40 07:38:08 Config A/D Result=40 07:38:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:08 Get A/D filter: -9.255963e+061 result=40 07:38:08 Get A/D value=-858993460 result=40 07:38:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:08 Parameters OK 07:38:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:08 Set A/D data flow result=40 07:38:08 Set A/D channel type result=40 07:38:08 Set A/D encoding result=40 07:38:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:08 Set channel filter=0.000000e+000 result=40 07:38:08 Config A/D Result=40 07:38:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:08 Get A/D filter: -9.255963e+061 result=40 07:38:08 Get A/D value=-858993460 result=40 07:38:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:08 Aux= 07:38:08 Message to Camera, serial 267231 queued 07:38:45 Received message from Master: op=PointingHead serial=267244 07:38:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:38:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:38:45 Point started: ret=0 07:38:45 point_skyscan result=0 07:38:46 Check angles 07:38:46 SkyScan query 07:38:47 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.15<-17410 Statuses=0009 0009 07:38:47 Msec=0 True Az=108.825 Ze=-81.15 Az status=0009 Ze status=0009 07:38:47 Check angles 07:38:47 SkyScan query 07:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 07:38:47 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 07:38:48 Check angles 07:38:48 SkyScan query 07:38:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 07:38:48 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 07:38:48 Check angles 07:38:48 SkyScan query 07:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 07:38:49 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 07:38:49 Check angles 07:38:49 SkyScan query 07:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 07:38:50 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 07:38:50 Check angles 07:38:50 SkyScan query 07:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:38:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:38:51 Message to Master queued w/err=0: serial=267244 error=0 07:38:56 Received message from Master: op=Filter serial=267245 07:38:56 Color wheel filter change from 0 to 0 07:38:56 FLIGetFilterPos err=0 currentPosition=0 07:38:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:56 Filter is already there-color wheel unchanged 07:38:56 Received message from Master: op=Shutter serial=267246 07:38:56 Shutter LASER open 07:38:56 Received message from Camera: op=State serial=267248 07:38:56 GetSingleValue result=40 Value=cccccccc 07:38:56 SkyScan query 07:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:38:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:56 Parameters OK 07:38:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:56 Set A/D data flow result=40 07:38:56 Set A/D channel type result=40 07:38:56 Set A/D encoding result=40 07:38:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:56 Set channel filter=0.000000e+000 result=40 07:38:56 Config A/D Result=40 07:38:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:56 Get A/D filter: -9.255963e+061 result=40 07:38:56 Get A/D value=-858993460 result=40 07:38:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:56 Parameters OK 07:38:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:56 Set A/D data flow result=40 07:38:56 Set A/D channel type result=40 07:38:56 Set A/D encoding result=40 07:38:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:56 Set channel filter=0.000000e+000 result=40 07:38:56 Config A/D Result=40 07:38:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:56 Get A/D filter: -9.255963e+061 result=40 07:38:56 Get A/D value=-858993460 result=40 07:38:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:56 Aux= 07:38:56 Message to Camera, serial 267248 queued 07:39:05 Received message from Master: op=Shutter serial=267258 07:39:05 Shutter LASER close 07:39:05 Received message from Master: op=PointingHead serial=267262 07:39:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:39:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:39:06 Point started: ret=0 07:39:06 point_skyscan result=0 07:39:06 Check angles 07:39:06 SkyScan query 07:39:07 SkyScan query done: ret=0 az=90.165<-6011 ze=157.455<-1503 Statuses=0009 0009 07:39:07 Msec=0 True Az=90.165 Ze=157.455 Az status=0009 Ze status=0009 07:39:07 Check angles 07:39:07 SkyScan query 07:39:08 SkyScan query done: ret=0 az=72.27<-4818 ze=136.11<-2926 Statuses=0009 0009 07:39:08 Msec=750 True Az=72.27 Ze=136.11 Az status=0009 Ze status=0009 07:39:08 Check angles 07:39:08 SkyScan query 07:39:08 SkyScan query done: ret=0 az=54.825<-3655 ze=115.11<-4326 Statuses=0009 0009 07:39:08 Msec=1500 True Az=54.825 Ze=115.11 Az status=0009 Ze status=0009 07:39:09 Check angles 07:39:09 SkyScan query 07:39:09 SkyScan query done: ret=0 az=40.995<-2733 ze=94.185<-5721 Statuses=0009 0009 07:39:09 Msec=2250 True Az=40.995 Ze=94.185 Az status=0009 Ze status=0009 07:39:09 Check angles 07:39:09 SkyScan query 07:39:10 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 07:39:10 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 07:39:10 Check angles 07:39:10 SkyScan query 07:39:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 07:39:11 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 07:39:11 Check angles 07:39:11 SkyScan query 07:39:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:39:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:39:11 Message to Master queued w/err=0: serial=267262 error=0 07:39:16 Received message from Master: op=Filter serial=267263 07:39:16 Color wheel filter change from 0 to 0 07:39:16 FLIGetFilterPos err=0 currentPosition=0 07:39:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:16 Filter is already there-color wheel unchanged 07:39:17 Received message from Master: op=Shutter serial=267264 07:39:17 Shutter LASER close 07:39:17 Received message from Camera: op=State serial=267266 07:39:17 GetSingleValue result=40 Value=cccccccc 07:39:17 SkyScan query 07:39:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:39:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:17 Parameters OK 07:39:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:17 Set A/D data flow result=40 07:39:17 Set A/D channel type result=40 07:39:17 Set A/D encoding result=40 07:39:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:17 Set channel filter=0.000000e+000 result=40 07:39:17 Config A/D Result=40 07:39:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:17 Get A/D filter: -9.255963e+061 result=40 07:39:17 Get A/D value=-858993460 result=40 07:39:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:17 Parameters OK 07:39:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:17 Set A/D data flow result=40 07:39:17 Set A/D channel type result=40 07:39:17 Set A/D encoding result=40 07:39:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:17 Set channel filter=0.000000e+000 result=40 07:39:17 Config A/D Result=40 07:39:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:17 Get A/D filter: -9.255963e+061 result=40 07:39:17 Get A/D value=-858993460 result=40 07:39:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:17 Aux= 07:39:17 Message to Camera, serial 267266 queued 07:39:54 Received message from Master: op=PointingHead serial=267279 07:39:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:39:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:39:55 Point started: ret=0 07:39:55 point_skyscan result=0 07:39:56 Check angles 07:39:56 SkyScan query 07:39:56 SkyScan query done: ret=0 az=63.735<-4249 ze=81<-6600 Statuses=0009 0009 07:39:56 Msec=0 True Az=63.735 Ze=81 Az status=0009 Ze status=0009 07:39:56 Check angles 07:39:56 SkyScan query 07:39:57 SkyScan query done: ret=0 az=81.225<-5415 ze=102<-5200 Statuses=0009 0009 07:39:57 Msec=750 True Az=81.225 Ze=102 Az status=0009 Ze status=0009 07:39:57 Check angles 07:39:57 SkyScan query 07:39:58 SkyScan query done: ret=0 az=98.55<-6570 ze=122.91<-3806 Statuses=0009 0009 07:39:58 Msec=1500 True Az=98.55 Ze=122.91 Az status=0009 Ze status=0009 07:39:58 Check angles 07:39:58 SkyScan query 07:39:58 SkyScan query done: ret=0 az=116.01<-7734 ze=143.895<-2407 Statuses=0009 0009 07:39:58 Msec=2250 True Az=116.01 Ze=143.895 Az status=0009 Ze status=0009 07:39:59 Check angles 07:39:59 SkyScan query 07:39:59 SkyScan query done: ret=0 az=130.965<-8731 ze=164.82<-1012 Statuses=0009 0009 07:39:59 Msec=3000 True Az=130.965 Ze=164.82 Az status=0009 Ze status=0009 07:39:59 Check angles 07:39:59 SkyScan query 07:40:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-174.225<-23615 Statuses=0008 0009 07:40:00 Msec=3750 True Az=130.995 Ze=-174.225 Az status=0008 Ze status=0009 07:40:00 Check angles 07:40:00 SkyScan query 07:40:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-153.24<-22216 Statuses=0008 0009 07:40:01 Msec=4500 True Az=130.995 Ze=-153.24 Az status=0008 Ze status=0009 07:40:01 Check angles 07:40:01 SkyScan query 07:40:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 07:40:01 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 07:40:01 Message to Master queued w/err=0: serial=267279 error=0 07:40:06 Received message from Master: op=Filter serial=267280 07:40:06 Color wheel filter change from 0 to 0 07:40:06 FLIGetFilterPos err=0 currentPosition=0 07:40:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:06 Filter is already there-color wheel unchanged 07:40:07 Received message from Master: op=Shutter serial=267281 07:40:07 Shutter LASER close 07:40:07 Received message from Camera: op=State serial=267283 07:40:07 GetSingleValue result=40 Value=cccccccc 07:40:07 SkyScan query 07:40:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:40:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:07 Parameters OK 07:40:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:07 Set A/D data flow result=40 07:40:07 Set A/D channel type result=40 07:40:07 Set A/D encoding result=40 07:40:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:07 Set channel filter=0.000000e+000 result=40 07:40:07 Config A/D Result=40 07:40:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:07 Get A/D filter: -9.255963e+061 result=40 07:40:07 Get A/D value=-858993460 result=40 07:40:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:07 Parameters OK 07:40:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:07 Set A/D data flow result=40 07:40:07 Set A/D channel type result=40 07:40:07 Set A/D encoding result=40 07:40:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:07 Set channel filter=0.000000e+000 result=40 07:40:07 Config A/D Result=40 07:40:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:07 Get A/D filter: -9.255963e+061 result=40 07:40:07 Get A/D value=-858993460 result=40 07:40:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:07 Aux= 07:40:07 Message to Camera, serial 267283 queued 07:40:44 Received message from Master: op=PointingHead serial=267296 07:40:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:40:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:40:44 Point started: ret=0 07:40:44 point_skyscan result=0 07:40:45 Check angles 07:40:45 SkyScan query 07:40:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.42<-23428 Statuses=0009 0009 07:40:46 Msec=0 True Az=112.995 Ze=-171.42 Az status=0009 Ze status=0009 07:40:46 Check angles 07:40:46 SkyScan query 07:40:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:40:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:40:46 Message to Master queued w/err=0: serial=267296 error=0 07:40:51 Received message from Master: op=Filter serial=267297 07:40:51 Color wheel filter change from 0 to 0 07:40:51 FLIGetFilterPos err=0 currentPosition=0 07:40:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:51 Filter is already there-color wheel unchanged 07:40:52 Received message from Master: op=Shutter serial=267298 07:40:52 Shutter LASER open 07:40:52 Received message from Camera: op=State serial=267300 07:40:52 GetSingleValue result=40 Value=cccccccc 07:40:52 SkyScan query 07:40:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:40:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:52 Parameters OK 07:40:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:52 Set A/D data flow result=40 07:40:52 Set A/D channel type result=40 07:40:52 Set A/D encoding result=40 07:40:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:52 Set channel filter=0.000000e+000 result=40 07:40:52 Config A/D Result=40 07:40:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:52 Get A/D filter: -9.255963e+061 result=40 07:40:52 Get A/D value=-858993460 result=40 07:40:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:52 Parameters OK 07:40:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:52 Set A/D data flow result=40 07:40:52 Set A/D channel type result=40 07:40:52 Set A/D encoding result=40 07:40:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:52 Set channel filter=0.000000e+000 result=40 07:40:52 Config A/D Result=40 07:40:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:52 Get A/D filter: -9.255963e+061 result=40 07:40:52 Get A/D value=-858993460 result=40 07:40:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:52 Aux= 07:40:52 Message to Camera, serial 267300 queued 07:41:01 Received message from Master: op=Shutter serial=267310 07:41:01 Shutter LASER close 07:41:01 Received message from Master: op=PointingHead serial=267314 07:41:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:41:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:41:02 Point started: ret=0 07:41:02 point_skyscan result=0 07:41:03 Check angles 07:41:03 SkyScan query 07:41:03 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.845<-21523 Statuses=0009 0009 07:41:03 Msec=0 True Az=136.305 Ze=-142.845 Az status=0009 Ze status=0009 07:41:03 Check angles 07:41:03 SkyScan query 07:41:04 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.845<-20123 Statuses=0009 0009 07:41:04 Msec=750 True Az=153.9 Ze=-121.845 Az status=0009 Ze status=0009 07:41:04 Check angles 07:41:04 SkyScan query 07:41:05 SkyScan query done: ret=0 az=171.33<-11422 ze=-100.89<-18726 Statuses=0009 0009 07:41:05 Msec=1500 True Az=171.33 Ze=-100.89 Az status=0009 Ze status=0009 07:41:05 Check angles 07:41:05 SkyScan query 07:41:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.98<-17332 Statuses=0008 0009 07:41:05 Msec=2250 True Az=176.01 Ze=-79.98 Az status=0008 Ze status=0009 07:41:06 Check angles 07:41:06 SkyScan query 07:41:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.98<-15932 Statuses=0008 0009 07:41:06 Msec=3000 True Az=175.995 Ze=-58.98 Az status=0008 Ze status=0009 07:41:06 Check angles 07:41:06 SkyScan query 07:41:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:41:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:41:07 Message to Master queued w/err=0: serial=267314 error=0 07:41:12 Received message from Master: op=Filter serial=267315 07:41:12 Color wheel filter change from 0 to 0 07:41:12 FLIGetFilterPos err=0 currentPosition=0 07:41:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:12 Filter is already there-color wheel unchanged 07:41:12 Received message from Master: op=Shutter serial=267316 07:41:12 Shutter LASER close 07:41:12 Received message from Camera: op=State serial=267318 07:41:12 GetSingleValue result=40 Value=cccccccc 07:41:12 SkyScan query 07:41:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:41:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:13 Parameters OK 07:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:13 Set A/D data flow result=40 07:41:13 Set A/D channel type result=40 07:41:13 Set A/D encoding result=40 07:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:13 Set channel filter=0.000000e+000 result=40 07:41:13 Config A/D Result=40 07:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:13 Get A/D filter: -9.255963e+061 result=40 07:41:13 Get A/D value=-858993460 result=40 07:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:13 Parameters OK 07:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:13 Set A/D data flow result=40 07:41:13 Set A/D channel type result=40 07:41:13 Set A/D encoding result=40 07:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:13 Set channel filter=0.000000e+000 result=40 07:41:13 Config A/D Result=40 07:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:13 Get A/D filter: -9.255963e+061 result=40 07:41:13 Get A/D value=-858993460 result=40 07:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:13 Aux= 07:41:13 Message to Camera, serial 267318 queued 07:41:49 Received message from Master: op=PointingHead serial=267330 07:41:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:41:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:41:49 Point started: ret=0 07:41:49 point_skyscan result=0 07:41:50 Check angles 07:41:50 SkyScan query 07:41:50 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.285<-13419 Statuses=0009 0009 07:41:50 Msec=0 True Az=152.67 Ze=-21.285 Az status=0009 Ze status=0009 07:41:51 Check angles 07:41:51 SkyScan query 07:41:51 SkyScan query done: ret=0 az=135.075<-9005 ze=-0.33<-12022 Statuses=0009 0009 07:41:51 Msec=750 True Az=135.075 Ze=-0.33 Az status=0009 Ze status=0009 07:41:51 Check angles 07:41:51 SkyScan query 07:41:52 SkyScan query done: ret=0 az=117.645<-7843 ze=20.64<-10624 Statuses=0009 0009 07:41:52 Msec=1500 True Az=117.645 Ze=20.64 Az status=0009 Ze status=0009 07:41:52 Check angles 07:41:52 SkyScan query 07:41:53 SkyScan query done: ret=0 az=100.245<-6683 ze=41.58<-9228 Statuses=0009 0009 07:41:53 Msec=2250 True Az=100.245 Ze=41.58 Az status=0009 Ze status=0009 07:41:53 Check angles 07:41:53 SkyScan query 07:41:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 07:41:53 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 07:41:54 Check angles 07:41:54 SkyScan query 07:41:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:41:54 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:41:54 Message to Master queued w/err=0: serial=267330 error=0 07:41:59 Received message from Master: op=Filter serial=267331 07:41:59 Color wheel filter change from 0 to 0 07:41:59 FLIGetFilterPos err=0 currentPosition=0 07:41:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:59 Filter is already there-color wheel unchanged 07:41:59 Received message from Master: op=Shutter serial=267332 07:41:59 Shutter LASER close 07:41:59 Received message from Camera: op=State serial=267334 07:41:59 GetSingleValue result=40 Value=cccccccc 07:41:59 SkyScan query 07:42:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:42:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:00 Parameters OK 07:42:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:00 Set A/D data flow result=40 07:42:00 Set A/D channel type result=40 07:42:00 Set A/D encoding result=40 07:42:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:00 Set channel filter=0.000000e+000 result=40 07:42:00 Config A/D Result=40 07:42:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:00 Get A/D filter: -9.255963e+061 result=40 07:42:00 Get A/D value=-858993460 result=40 07:42:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:00 Parameters OK 07:42:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:00 Set A/D data flow result=40 07:42:00 Set A/D channel type result=40 07:42:00 Set A/D encoding result=40 07:42:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:00 Set channel filter=0.000000e+000 result=40 07:42:00 Config A/D Result=40 07:42:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:00 Get A/D filter: -9.255963e+061 result=40 07:42:00 Get A/D value=-858993460 result=40 07:42:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:00 Aux= 07:42:00 Message to Camera, serial 267334 queued 07:42:37 Received message from Master: op=PointingHead serial=267347 07:42:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:42:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:42:37 Point started: ret=0 07:42:37 point_skyscan result=0 07:42:38 Check angles 07:42:38 SkyScan query 07:42:39 SkyScan query done: ret=0 az=85.995<-5733 ze=21.825<-10545 Statuses=0008 0009 07:42:39 Msec=0 True Az=85.995 Ze=21.825 Az status=0008 Ze status=0009 07:42:39 Check angles 07:42:39 SkyScan query 07:42:39 SkyScan query done: ret=0 az=85.995<-5733 ze=0.51<-11966 Statuses=0008 0009 07:42:39 Msec=750 True Az=85.995 Ze=0.51 Az status=0008 Ze status=0009 07:42:40 Check angles 07:42:40 SkyScan query 07:42:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.505<-13367 Statuses=0008 0009 07:42:40 Msec=1500 True Az=85.995 Ze=-20.505 Az status=0008 Ze status=0009 07:42:40 Check angles 07:42:40 SkyScan query 07:42:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.385<-14759 Statuses=0008 0009 07:42:41 Msec=2250 True Az=85.995 Ze=-41.385 Az status=0008 Ze status=0009 07:42:41 Check angles 07:42:41 SkyScan query 07:42:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:42:42 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:42:42 Message to Master queued w/err=0: serial=267347 error=0 07:42:47 Received message from Master: op=Filter serial=267348 07:42:47 Color wheel filter change from 0 to 0 07:42:47 FLIGetFilterPos err=0 currentPosition=0 07:42:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:47 Filter is already there-color wheel unchanged 07:42:47 Received message from Master: op=Shutter serial=267349 07:42:47 Shutter LASER close 07:42:47 Received message from Camera: op=State serial=267351 07:42:47 GetSingleValue result=40 Value=cccccccc 07:42:47 SkyScan query 07:42:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:42:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:47 Parameters OK 07:42:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:47 Set A/D data flow result=40 07:42:47 Set A/D channel type result=40 07:42:47 Set A/D encoding result=40 07:42:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:47 Set channel filter=0.000000e+000 result=40 07:42:47 Config A/D Result=40 07:42:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:47 Get A/D filter: -9.255963e+061 result=40 07:42:47 Get A/D value=-858993460 result=40 07:42:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:47 Parameters OK 07:42:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:47 Set A/D data flow result=40 07:42:47 Set A/D channel type result=40 07:42:47 Set A/D encoding result=40 07:42:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:47 Set channel filter=0.000000e+000 result=40 07:42:47 Config A/D Result=40 07:42:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:47 Get A/D filter: -9.255963e+061 result=40 07:42:47 Get A/D value=-858993460 result=40 07:42:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:47 Aux= 07:42:47 Message to Camera, serial 267351 queued 07:43:24 Received message from Master: op=PointingHead serial=267364 07:43:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:43:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:43:25 Point started: ret=0 07:43:25 point_skyscan result=0 07:43:25 Check angles 07:43:25 SkyScan query 07:43:26 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.72<-17448 Statuses=0009 0009 07:43:26 Msec=0 True Az=109.395 Ze=-81.72 Az status=0009 Ze status=0009 07:43:26 Check angles 07:43:26 SkyScan query 07:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 07:43:27 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 07:43:27 Check angles 07:43:27 SkyScan query 07:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 07:43:27 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 07:43:28 Check angles 07:43:28 SkyScan query 07:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 07:43:28 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 07:43:28 Check angles 07:43:28 SkyScan query 07:43:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 07:43:29 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 07:43:29 Check angles 07:43:29 SkyScan query 07:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:43:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:43:30 Message to Master queued w/err=0: serial=267364 error=0 07:43:35 Received message from Master: op=Filter serial=267365 07:43:35 Color wheel filter change from 0 to 0 07:43:35 FLIGetFilterPos err=0 currentPosition=0 07:43:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:35 Filter is already there-color wheel unchanged 07:43:35 Received message from Master: op=Shutter serial=267366 07:43:35 Shutter LASER open 07:43:35 Received message from Camera: op=State serial=267368 07:43:35 GetSingleValue result=40 Value=cccccccc 07:43:35 SkyScan query 07:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:43:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:36 Parameters OK 07:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:36 Set A/D data flow result=40 07:43:36 Set A/D channel type result=40 07:43:36 Set A/D encoding result=40 07:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:36 Set channel filter=0.000000e+000 result=40 07:43:36 Config A/D Result=40 07:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:36 Get A/D filter: -9.255963e+061 result=40 07:43:36 Get A/D value=-858993460 result=40 07:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:36 Parameters OK 07:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:36 Set A/D data flow result=40 07:43:36 Set A/D channel type result=40 07:43:36 Set A/D encoding result=40 07:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:36 Set channel filter=0.000000e+000 result=40 07:43:36 Config A/D Result=40 07:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:36 Get A/D filter: -9.255963e+061 result=40 07:43:36 Get A/D value=-858993460 result=40 07:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:36 Aux= 07:43:36 Message to Camera, serial 267368 queued 07:43:44 Received message from Master: op=Shutter serial=267378 07:43:44 Shutter LASER close 07:43:44 Received message from Master: op=PointingHead serial=267382 07:43:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:43:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:43:45 Point started: ret=0 07:43:45 point_skyscan result=0 07:43:46 Check angles 07:43:46 SkyScan query 07:43:46 SkyScan query done: ret=0 az=89.88<-5992 ze=157.185<-1521 Statuses=0009 0009 07:43:46 Msec=0 True Az=89.88 Ze=157.185 Az status=0009 Ze status=0009 07:43:46 Check angles 07:43:46 SkyScan query 07:43:47 SkyScan query done: ret=0 az=72.06<-4804 ze=135.84<-2944 Statuses=0009 0009 07:43:47 Msec=750 True Az=72.06 Ze=135.84 Az status=0009 Ze status=0009 07:43:47 Check angles 07:43:47 SkyScan query 07:43:48 SkyScan query done: ret=0 az=54.585<-3639 ze=114.81<-4346 Statuses=0009 0009 07:43:48 Msec=1500 True Az=54.585 Ze=114.81 Az status=0009 Ze status=0009 07:43:48 Check angles 07:43:48 SkyScan query 07:43:48 SkyScan query done: ret=0 az=40.98<-2732 ze=93.9<-5740 Statuses=0009 0009 07:43:48 Msec=2250 True Az=40.98 Ze=93.9 Az status=0009 Ze status=0009 07:43:49 Check angles 07:43:49 SkyScan query 07:43:49 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 07:43:49 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 07:43:49 Check angles 07:43:49 SkyScan query 07:43:50 SkyScan query done: ret=0 az=40.98<-2732 ze=52.08<-8528 Statuses=0008 0009 07:43:50 Msec=3750 True Az=40.98 Ze=52.08 Az status=0008 Ze status=0009 07:43:50 Check angles 07:43:50 SkyScan query 07:43:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:43:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:43:51 Message to Master queued w/err=0: serial=267382 error=0 07:43:56 Received message from Master: op=Filter serial=267383 07:43:56 Color wheel filter change from 0 to 0 07:43:56 FLIGetFilterPos err=0 currentPosition=0 07:43:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:56 Filter is already there-color wheel unchanged 07:43:56 Received message from Master: op=Shutter serial=267384 07:43:56 Shutter LASER close 07:43:56 Received message from Camera: op=State serial=267386 07:43:56 GetSingleValue result=40 Value=cccccccc 07:43:56 SkyScan query 07:43:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:43:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:57 Parameters OK 07:43:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:57 Set A/D data flow result=40 07:43:57 Set A/D channel type result=40 07:43:57 Set A/D encoding result=40 07:43:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:57 Set channel filter=0.000000e+000 result=40 07:43:57 Config A/D Result=40 07:43:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:57 Get A/D filter: -9.255963e+061 result=40 07:43:57 Get A/D value=-858993460 result=40 07:43:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:57 Parameters OK 07:43:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:57 Set A/D data flow result=40 07:43:57 Set A/D channel type result=40 07:43:57 Set A/D encoding result=40 07:43:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:57 Set channel filter=0.000000e+000 result=40 07:43:57 Config A/D Result=40 07:43:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:57 Get A/D filter: -9.255963e+061 result=40 07:43:57 Get A/D value=-858993460 result=40 07:43:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:57 Aux= 07:43:57 Message to Camera, serial 267386 queued 07:44:34 Received message from Master: op=PointingHead serial=267399 07:44:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:44:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:44:34 Point started: ret=0 07:44:34 point_skyscan result=0 07:44:35 Check angles 07:44:35 SkyScan query 07:44:35 SkyScan query done: ret=0 az=64.05<-4270 ze=81.435<-6571 Statuses=0009 0009 07:44:35 Msec=0 True Az=64.05 Ze=81.435 Az status=0009 Ze status=0009 07:44:36 Check angles 07:44:36 SkyScan query 07:44:36 SkyScan query done: ret=0 az=81.525<-5435 ze=102.39<-5174 Statuses=0009 0009 07:44:36 Msec=750 True Az=81.525 Ze=102.39 Az status=0009 Ze status=0009 07:44:36 Check angles 07:44:36 SkyScan query 07:44:37 SkyScan query done: ret=0 az=99.435<-6629 ze=123.78<-3748 Statuses=0009 0009 07:44:37 Msec=1500 True Az=99.435 Ze=123.78 Az status=0009 Ze status=0009 07:44:37 Check angles 07:44:37 SkyScan query 07:44:38 SkyScan query done: ret=0 az=116.88<-7792 ze=144.69<-2354 Statuses=0009 0009 07:44:38 Msec=2250 True Az=116.88 Ze=144.69 Az status=0009 Ze status=0009 07:44:38 Check angles 07:44:38 SkyScan query 07:44:38 SkyScan query done: ret=0 az=130.995<-8733 ze=165.675<-955 Statuses=0009 0009 07:44:38 Msec=3000 True Az=130.995 Ze=165.675 Az status=0009 Ze status=0009 07:44:39 Check angles 07:44:39 SkyScan query 07:44:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.355<-23557 Statuses=0008 0009 07:44:39 Msec=3750 True Az=130.995 Ze=-173.355 Az status=0008 Ze status=0009 07:44:39 Check angles 07:44:39 SkyScan query 07:44:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.98<-22132 Statuses=0008 0009 07:44:40 Msec=4500 True Az=130.995 Ze=-151.98 Az status=0008 Ze status=0009 07:44:40 Check angles 07:44:40 SkyScan query 07:44:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 07:44:41 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 07:44:41 Message to Master queued w/err=0: serial=267399 error=0 07:44:46 Received message from Master: op=Filter serial=267400 07:44:46 Color wheel filter change from 0 to 0 07:44:46 FLIGetFilterPos err=0 currentPosition=0 07:44:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:46 Filter is already there-color wheel unchanged 07:44:46 Received message from Master: op=Shutter serial=267401 07:44:46 Shutter LASER close 07:44:46 Received message from Camera: op=State serial=267403 07:44:46 GetSingleValue result=40 Value=cccccccc 07:44:46 SkyScan query 07:44:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:44:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:47 Parameters OK 07:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:47 Set A/D data flow result=40 07:44:47 Set A/D channel type result=40 07:44:47 Set A/D encoding result=40 07:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:47 Set channel filter=0.000000e+000 result=40 07:44:47 Config A/D Result=40 07:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:47 Get A/D filter: -9.255963e+061 result=40 07:44:47 Get A/D value=-858993460 result=40 07:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:47 Parameters OK 07:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:47 Set A/D data flow result=40 07:44:47 Set A/D channel type result=40 07:44:47 Set A/D encoding result=40 07:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:47 Set channel filter=0.000000e+000 result=40 07:44:47 Config A/D Result=40 07:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:47 Get A/D filter: -9.255963e+061 result=40 07:44:47 Get A/D value=-858993460 result=40 07:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:47 Aux= 07:44:47 Message to Camera, serial 267403 queued 07:45:23 Received message from Master: op=PointingHead serial=267416 07:45:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:45:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:45:24 Point started: ret=0 07:45:24 point_skyscan result=0 07:45:24 Check angles 07:45:24 SkyScan query 07:45:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 07:45:25 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 07:45:25 Check angles 07:45:25 SkyScan query 07:45:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:45:26 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 [UTC 2018-12-19 07:45:26] 07:45:26 Message to Master queued w/err=0: serial=267416 error=0 07:45:27 Received message from Master: op=Identify serial=267417 07:45:31 Received message from Master: op=Filter serial=267420 07:45:31 Color wheel filter change from 0 to 0 07:45:31 FLIGetFilterPos err=0 currentPosition=0 07:45:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:31 Filter is already there-color wheel unchanged 07:45:31 Received message from Master: op=Shutter serial=267421 07:45:31 Shutter LASER open 07:45:31 Received message from Camera: op=State serial=267423 07:45:31 GetSingleValue result=40 Value=cccccccc 07:45:31 SkyScan query 07:45:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:45:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:32 Parameters OK 07:45:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:32 Set A/D data flow result=40 07:45:32 Set A/D channel type result=40 07:45:32 Set A/D encoding result=40 07:45:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:32 Set channel filter=0.000000e+000 result=40 07:45:32 Config A/D Result=40 07:45:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:32 Get A/D filter: -9.255963e+061 result=40 07:45:32 Get A/D value=-858993460 result=40 07:45:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:32 Parameters OK 07:45:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:32 Set A/D data flow result=40 07:45:32 Set A/D channel type result=40 07:45:32 Set A/D encoding result=40 07:45:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:32 Set channel filter=0.000000e+000 result=40 07:45:32 Config A/D Result=40 07:45:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:32 Get A/D filter: -9.255963e+061 result=40 07:45:32 Get A/D value=-858993460 result=40 07:45:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:32 Aux= 07:45:32 Message to Camera, serial 267423 queued 07:45:40 Received message from Master: op=Shutter serial=267433 07:45:40 Shutter LASER close 07:45:41 Received message from Master: op=PointingHead serial=267437 07:45:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:45:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:45:41 Point started: ret=0 07:45:41 point_skyscan result=0 07:45:42 Check angles 07:45:42 SkyScan query 07:45:42 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.505<-21567 Statuses=0009 0009 07:45:42 Msec=0 True Az=135.84 Ze=-143.505 Az status=0009 Ze status=0009 07:45:43 Check angles 07:45:43 SkyScan query 07:45:43 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.085<-20139 Statuses=0009 0009 07:45:43 Msec=750 True Az=153.66 Ze=-122.085 Az status=0009 Ze status=0009 07:45:43 Check angles 07:45:43 SkyScan query 07:45:44 SkyScan query done: ret=0 az=171.165<-11411 ze=-101.16<-18744 Statuses=0009 0009 07:45:44 Msec=1500 True Az=171.165 Ze=-101.16 Az status=0009 Ze status=0009 07:45:44 Check angles 07:45:44 SkyScan query 07:45:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.22<-17348 Statuses=0008 0009 07:45:45 Msec=2250 True Az=176.01 Ze=-80.22 Az status=0008 Ze status=0009 07:45:45 Check angles 07:45:45 SkyScan query 07:45:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.235<-15949 Statuses=0008 0009 07:45:45 Msec=3000 True Az=176.01 Ze=-59.235 Az status=0008 Ze status=0009 07:45:46 Check angles 07:45:46 SkyScan query 07:45:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:45:46 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:45:46 Message to Master queued w/err=0: serial=267437 error=0 07:45:51 Received message from Master: op=Filter serial=267438 07:45:51 Color wheel filter change from 0 to 0 07:45:51 FLIGetFilterPos err=0 currentPosition=0 07:45:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:51 Filter is already there-color wheel unchanged 07:45:51 Received message from Master: op=Shutter serial=267439 07:45:51 Shutter LASER close 07:45:51 Received message from Camera: op=State serial=267441 07:45:51 GetSingleValue result=40 Value=cccccccc 07:45:51 SkyScan query 07:45:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:45:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:52 Parameters OK 07:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:52 Set A/D data flow result=40 07:45:52 Set A/D channel type result=40 07:45:52 Set A/D encoding result=40 07:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:52 Set channel filter=0.000000e+000 result=40 07:45:52 Config A/D Result=40 07:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:52 Get A/D filter: -9.255963e+061 result=40 07:45:52 Get A/D value=-858993460 result=40 07:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:52 Parameters OK 07:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:52 Set A/D data flow result=40 07:45:52 Set A/D channel type result=40 07:45:52 Set A/D encoding result=40 07:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:52 Set channel filter=0.000000e+000 result=40 07:45:52 Config A/D Result=40 07:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:52 Get A/D filter: -9.255963e+061 result=40 07:45:52 Get A/D value=-858993460 result=40 07:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:52 Aux= 07:45:52 Message to Camera, serial 267441 queued 07:46:29 Received message from Master: op=PointingHead serial=267454 07:46:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:46:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:46:29 Point started: ret=0 07:46:29 point_skyscan result=0 07:46:30 Check angles 07:46:30 SkyScan query 07:46:31 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.555<-13437 Statuses=0009 0009 07:46:31 Msec=0 True Az=152.925 Ze=-21.555 Az status=0009 Ze status=0009 07:46:31 Check angles 07:46:31 SkyScan query 07:46:31 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.555<-12037 Statuses=0009 0009 07:46:31 Msec=750 True Az=135.405 Ze=-0.555 Az status=0009 Ze status=0009 07:46:32 Check angles 07:46:32 SkyScan query 07:46:32 SkyScan query done: ret=0 az=117.57<-7838 ze=20.865<-10609 Statuses=0009 0009 07:46:32 Msec=1500 True Az=117.57 Ze=20.865 Az status=0009 Ze status=0009 07:46:32 Check angles 07:46:32 SkyScan query 07:46:33 SkyScan query done: ret=0 az=100.155<-6677 ze=41.76<-9216 Statuses=0009 0009 07:46:33 Msec=2250 True Az=100.155 Ze=41.76 Az status=0009 Ze status=0009 07:46:33 Check angles 07:46:33 SkyScan query 07:46:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 07:46:34 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 07:46:34 Check angles 07:46:34 SkyScan query 07:46:34 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 07:46:34 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 07:46:34 Message to Master queued w/err=0: serial=267454 error=0 07:46:39 Received message from Master: op=Filter serial=267455 07:46:39 Color wheel filter change from 0 to 0 07:46:39 FLIGetFilterPos err=0 currentPosition=0 07:46:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:39 Filter is already there-color wheel unchanged 07:46:40 Received message from Master: op=Shutter serial=267456 07:46:40 Shutter LASER close 07:46:40 Received message from Camera: op=State serial=267458 07:46:40 GetSingleValue result=40 Value=cccccccc 07:46:40 SkyScan query 07:46:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:40 Parameters OK 07:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:40 Set A/D data flow result=40 07:46:40 Set A/D channel type result=40 07:46:40 Set A/D encoding result=40 07:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:40 Set channel filter=0.000000e+000 result=40 07:46:40 Config A/D Result=40 07:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:40 Get A/D filter: -9.255963e+061 result=40 07:46:40 Get A/D value=-858993460 result=40 07:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:40 Parameters OK 07:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:40 Set A/D data flow result=40 07:46:40 Set A/D channel type result=40 07:46:40 Set A/D encoding result=40 07:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:40 Set channel filter=0.000000e+000 result=40 07:46:40 Config A/D Result=40 07:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:40 Get A/D filter: -9.255963e+061 result=40 07:46:40 Get A/D value=-858993460 result=40 07:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:40 Aux= 07:46:40 Message to Camera, serial 267458 queued 07:47:17 Received message from Master: op=PointingHead serial=267471 07:47:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:47:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:47:18 Point started: ret=0 07:47:18 point_skyscan result=0 07:47:18 Check angles 07:47:18 SkyScan query 07:47:19 SkyScan query done: ret=0 az=85.995<-5733 ze=21.75<-10550 Statuses=0008 0009 07:47:19 Msec=0 True Az=85.995 Ze=21.75 Az status=0008 Ze status=0009 07:47:19 Check angles 07:47:19 SkyScan query 07:47:20 SkyScan query done: ret=0 az=85.995<-5733 ze=0.885<-11941 Statuses=0008 0009 07:47:20 Msec=750 True Az=85.995 Ze=0.885 Az status=0008 Ze status=0009 07:47:20 Check angles 07:47:20 SkyScan query 07:47:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.1<-13340 Statuses=0008 0009 07:47:20 Msec=1500 True Az=85.995 Ze=-20.1 Az status=0008 Ze status=0009 07:47:21 Check angles 07:47:21 SkyScan query 07:47:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.995<-14733 Statuses=0008 0009 07:47:21 Msec=2250 True Az=85.995 Ze=-40.995 Az status=0008 Ze status=0009 07:47:21 Check angles 07:47:21 SkyScan query 07:47:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:47:22 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:47:22 Message to Master queued w/err=0: serial=267471 error=0 07:47:27 Received message from Master: op=Filter serial=267472 07:47:27 Color wheel filter change from 0 to 0 07:47:27 FLIGetFilterPos err=0 currentPosition=0 07:47:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:27 Filter is already there-color wheel unchanged 07:47:27 Received message from Master: op=Shutter serial=267473 07:47:27 Shutter LASER close 07:47:27 Received message from Camera: op=State serial=267475 07:47:27 GetSingleValue result=40 Value=cccccccc 07:47:27 SkyScan query 07:47:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:47:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:28 Parameters OK 07:47:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:28 Set A/D data flow result=40 07:47:28 Set A/D channel type result=40 07:47:28 Set A/D encoding result=40 07:47:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:28 Set channel filter=0.000000e+000 result=40 07:47:28 Config A/D Result=40 07:47:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:28 Get A/D filter: -9.255963e+061 result=40 07:47:28 Get A/D value=-858993460 result=40 07:47:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:28 Parameters OK 07:47:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:28 Set A/D data flow result=40 07:47:28 Set A/D channel type result=40 07:47:28 Set A/D encoding result=40 07:47:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:28 Set channel filter=0.000000e+000 result=40 07:47:28 Config A/D Result=40 07:47:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:28 Get A/D filter: -9.255963e+061 result=40 07:47:28 Get A/D value=-858993460 result=40 07:47:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:28 Aux= 07:47:28 Message to Camera, serial 267475 queued 07:48:04 Received message from Master: op=PointingHead serial=267488 07:48:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:48:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:48:05 Point started: ret=0 07:48:05 point_skyscan result=0 07:48:06 Check angles 07:48:06 SkyScan query 07:48:06 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.54<-17436 Statuses=0009 0009 07:48:06 Msec=0 True Az=109.215 Ze=-81.54 Az status=0009 Ze status=0009 07:48:06 Check angles 07:48:06 SkyScan query 07:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.885<-18859 Statuses=0008 0009 07:48:07 Msec=750 True Az=112.995 Ze=-102.885 Az status=0008 Ze status=0009 07:48:07 Check angles 07:48:07 SkyScan query 07:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 07:48:08 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 07:48:08 Check angles 07:48:08 SkyScan query 07:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 07:48:08 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 07:48:09 Check angles 07:48:09 SkyScan query 07:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 07:48:09 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 07:48:09 Check angles 07:48:09 SkyScan query 07:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:48:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:48:10 Message to Master queued w/err=0: serial=267488 error=0 07:48:15 Received message from Master: op=Filter serial=267489 07:48:15 Color wheel filter change from 0 to 0 07:48:15 FLIGetFilterPos err=0 currentPosition=0 07:48:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:15 Filter is already there-color wheel unchanged 07:48:15 Received message from Master: op=Shutter serial=267490 07:48:15 Shutter LASER open 07:48:15 Received message from Camera: op=State serial=267492 07:48:15 GetSingleValue result=40 Value=cccccccc 07:48:15 SkyScan query 07:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:48:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:16 Parameters OK 07:48:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:16 Set A/D data flow result=40 07:48:16 Set A/D channel type result=40 07:48:16 Set A/D encoding result=40 07:48:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:16 Set channel filter=0.000000e+000 result=40 07:48:16 Config A/D Result=40 07:48:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:16 Get A/D filter: -9.255963e+061 result=40 07:48:16 Get A/D value=-858993460 result=40 07:48:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:16 Parameters OK 07:48:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:16 Set A/D data flow result=40 07:48:16 Set A/D channel type result=40 07:48:16 Set A/D encoding result=40 07:48:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:16 Set channel filter=0.000000e+000 result=40 07:48:16 Config A/D Result=40 07:48:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:16 Get A/D filter: -9.255963e+061 result=40 07:48:16 Get A/D value=-858993460 result=40 07:48:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:16 Aux= 07:48:16 Message to Camera, serial 267492 queued 07:48:24 Received message from Master: op=Shutter serial=267502 07:48:24 Shutter LASER close 07:48:25 Received message from Master: op=PointingHead serial=267506 07:48:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:48:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:48:25 Point started: ret=0 07:48:25 point_skyscan result=0 07:48:26 Check angles 07:48:26 SkyScan query 07:48:26 SkyScan query done: ret=0 az=90.255<-6017 ze=157.56<-1496 Statuses=0009 0009 07:48:26 Msec=0 True Az=90.255 Ze=157.56 Az status=0009 Ze status=0009 07:48:27 Check angles 07:48:27 SkyScan query 07:48:27 SkyScan query done: ret=0 az=72.315<-4821 ze=136.2<-2920 Statuses=0009 0009 07:48:27 Msec=750 True Az=72.315 Ze=136.2 Az status=0009 Ze status=0009 07:48:27 Check angles 07:48:27 SkyScan query 07:48:28 SkyScan query done: ret=0 az=54.99<-3666 ze=115.215<-4319 Statuses=0009 0009 07:48:28 Msec=1500 True Az=54.99 Ze=115.215 Az status=0009 Ze status=0009 07:48:28 Check angles 07:48:28 SkyScan query 07:48:29 SkyScan query done: ret=0 az=41.01<-2734 ze=94.275<-5715 Statuses=0009 0009 07:48:29 Msec=2250 True Az=41.01 Ze=94.275 Az status=0009 Ze status=0009 07:48:29 Check angles 07:48:29 SkyScan query 07:48:29 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 07:48:29 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 07:48:30 Check angles 07:48:30 SkyScan query 07:48:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.8<-8480 Statuses=0008 0009 07:48:30 Msec=3750 True Az=40.995 Ze=52.8 Az status=0008 Ze status=0009 07:48:30 Check angles 07:48:30 SkyScan query 07:48:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:48:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:48:31 Message to Master queued w/err=0: serial=267506 error=0 07:48:36 Received message from Master: op=Filter serial=267507 07:48:36 Color wheel filter change from 0 to 0 07:48:36 FLIGetFilterPos err=0 currentPosition=0 07:48:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:36 Filter is already there-color wheel unchanged 07:48:36 Received message from Master: op=Shutter serial=267508 07:48:36 Shutter LASER close 07:48:36 Received message from Camera: op=State serial=267510 07:48:36 GetSingleValue result=40 Value=cccccccc 07:48:36 SkyScan query 07:48:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:48:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:37 Parameters OK 07:48:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:37 Set A/D data flow result=40 07:48:37 Set A/D channel type result=40 07:48:37 Set A/D encoding result=40 07:48:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:37 Set channel filter=0.000000e+000 result=40 07:48:37 Config A/D Result=40 07:48:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:37 Get A/D filter: -9.255963e+061 result=40 07:48:37 Get A/D value=-858993460 result=40 07:48:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:37 Parameters OK 07:48:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:37 Set A/D data flow result=40 07:48:37 Set A/D channel type result=40 07:48:37 Set A/D encoding result=40 07:48:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:37 Set channel filter=0.000000e+000 result=40 07:48:37 Config A/D Result=40 07:48:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:37 Get A/D filter: -9.255963e+061 result=40 07:48:37 Get A/D value=-858993460 result=40 07:48:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:37 Aux= 07:48:37 Message to Camera, serial 267510 queued 07:49:14 Received message from Master: op=PointingHead serial=267523 07:49:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:49:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:49:14 Point started: ret=0 07:49:14 point_skyscan result=0 07:49:15 Check angles 07:49:15 SkyScan query 07:49:16 SkyScan query done: ret=0 az=63.765<-4251 ze=80.985<-6601 Statuses=0009 0009 07:49:16 Msec=0 True Az=63.765 Ze=80.985 Az status=0009 Ze status=0009 07:49:16 Check angles 07:49:16 SkyScan query 07:49:16 SkyScan query done: ret=0 az=81.135<-5409 ze=101.985<-5201 Statuses=0009 0009 07:49:16 Msec=750 True Az=81.135 Ze=101.985 Az status=0009 Ze status=0009 07:49:17 Check angles 07:49:17 SkyScan query 07:49:17 SkyScan query done: ret=0 az=98.55<-6570 ze=122.895<-3807 Statuses=0009 0009 07:49:17 Msec=1500 True Az=98.55 Ze=122.895 Az status=0009 Ze status=0009 07:49:17 Check angles 07:49:17 SkyScan query 07:49:18 SkyScan query done: ret=0 az=115.995<-7733 ze=143.88<-2408 Statuses=0009 0009 07:49:18 Msec=2250 True Az=115.995 Ze=143.88 Az status=0009 Ze status=0009 07:49:18 Check angles 07:49:18 SkyScan query 07:49:19 SkyScan query done: ret=0 az=130.965<-8731 ze=164.79<-1014 Statuses=0009 0009 07:49:19 Msec=3000 True Az=130.965 Ze=164.79 Az status=0009 Ze status=0009 07:49:19 Check angles 07:49:19 SkyScan query 07:49:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-174.24<-23616 Statuses=0008 0009 07:49:19 Msec=3750 True Az=130.995 Ze=-174.24 Az status=0008 Ze status=0009 07:49:20 Check angles 07:49:20 SkyScan query 07:49:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-153.27<-22218 Statuses=0008 0009 07:49:20 Msec=4500 True Az=130.995 Ze=-153.27 Az status=0008 Ze status=0009 07:49:20 Check angles 07:49:20 SkyScan query 07:49:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 07:49:21 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 07:49:21 Message to Master queued w/err=0: serial=267523 error=0 07:49:26 Received message from Master: op=Filter serial=267524 07:49:26 Color wheel filter change from 0 to 0 07:49:26 FLIGetFilterPos err=0 currentPosition=0 07:49:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:26 Filter is already there-color wheel unchanged 07:49:26 Received message from Master: op=Shutter serial=267525 07:49:26 Shutter LASER close 07:49:26 Received message from Camera: op=State serial=267527 07:49:26 GetSingleValue result=40 Value=cccccccc 07:49:26 SkyScan query 07:49:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:49:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:27 Parameters OK 07:49:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:27 Set A/D data flow result=40 07:49:27 Set A/D channel type result=40 07:49:27 Set A/D encoding result=40 07:49:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:27 Set channel filter=0.000000e+000 result=40 07:49:27 Config A/D Result=40 07:49:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:27 Get A/D filter: -9.255963e+061 result=40 07:49:27 Get A/D value=-858993460 result=40 07:49:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:27 Parameters OK 07:49:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:27 Set A/D data flow result=40 07:49:27 Set A/D channel type result=40 07:49:27 Set A/D encoding result=40 07:49:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:27 Set channel filter=0.000000e+000 result=40 07:49:27 Config A/D Result=40 07:49:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:27 Get A/D filter: -9.255963e+061 result=40 07:49:27 Get A/D value=-858993460 result=40 07:49:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:27 Aux= 07:49:27 Message to Camera, serial 267527 queued 07:50:04 Received message from Master: op=PointingHead serial=267540 07:50:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:50:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:50:04 Point started: ret=0 07:50:04 point_skyscan result=0 07:50:05 Check angles 07:50:05 SkyScan query 07:50:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 07:50:05 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 07:50:05 Check angles 07:50:05 SkyScan query 07:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:50:06 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:50:06 Message to Master queued w/err=0: serial=267540 error=0 07:50:11 Received message from Master: op=Filter serial=267541 07:50:11 Color wheel filter change from 0 to 0 07:50:11 FLIGetFilterPos err=0 currentPosition=0 07:50:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:11 Filter is already there-color wheel unchanged 07:50:11 Received message from Master: op=Shutter serial=267542 07:50:11 Shutter LASER open 07:50:11 Received message from Camera: op=State serial=267544 07:50:11 GetSingleValue result=40 Value=cccccccc 07:50:11 SkyScan query 07:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:50:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:12 Parameters OK 07:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:12 Set A/D data flow result=40 07:50:12 Set A/D channel type result=40 07:50:12 Set A/D encoding result=40 07:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:12 Set channel filter=0.000000e+000 result=40 07:50:12 Config A/D Result=40 07:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:12 Get A/D filter: -9.255963e+061 result=40 07:50:12 Get A/D value=-858993460 result=40 07:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:12 Parameters OK 07:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:12 Set A/D data flow result=40 07:50:12 Set A/D channel type result=40 07:50:12 Set A/D encoding result=40 07:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:12 Set channel filter=0.000000e+000 result=40 07:50:12 Config A/D Result=40 07:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:12 Get A/D filter: -9.255963e+061 result=40 07:50:12 Get A/D value=-858993460 result=40 07:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:12 Aux= 07:50:12 Message to Camera, serial 267544 queued 07:50:20 Received message from Master: op=Shutter serial=267554 07:50:20 Shutter LASER close 07:50:21 Received message from Master: op=PointingHead serial=267558 07:50:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:50:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:50:21 Point started: ret=0 07:50:21 point_skyscan result=0 07:50:22 Check angles 07:50:22 SkyScan query 07:50:23 SkyScan query done: ret=0 az=136.32<-9088 ze=-142.965<-21531 Statuses=0009 0009 07:50:23 Msec=0 True Az=136.32 Ze=-142.965 Az status=0009 Ze status=0009 07:50:23 Check angles 07:50:23 SkyScan query 07:50:23 SkyScan query done: ret=0 az=154.14<-10276 ze=-121.545<-20103 Statuses=0009 0009 07:50:23 Msec=750 True Az=154.14 Ze=-121.545 Az status=0009 Ze status=0009 07:50:24 Check angles 07:50:24 SkyScan query 07:50:24 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.5<-18700 Statuses=0009 0009 07:50:24 Msec=1500 True Az=171.555 Ze=-100.5 Az status=0009 Ze status=0009 07:50:24 Check angles 07:50:24 SkyScan query 07:50:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 07:50:25 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 07:50:25 Check angles 07:50:25 SkyScan query 07:50:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 07:50:26 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 07:50:26 Check angles 07:50:26 SkyScan query 07:50:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:50:26 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:50:26 Message to Master queued w/err=0: serial=267558 error=0 07:50:31 Received message from Master: op=Filter serial=267559 07:50:31 Color wheel filter change from 0 to 0 07:50:31 FLIGetFilterPos err=0 currentPosition=0 07:50:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:31 Filter is already there-color wheel unchanged 07:50:32 Received message from Master: op=Shutter serial=267560 07:50:32 Shutter LASER close 07:50:32 Received message from Camera: op=State serial=267562 07:50:32 GetSingleValue result=40 Value=cccccccc 07:50:32 SkyScan query 07:50:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:50:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:32 Parameters OK 07:50:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:32 Set A/D data flow result=40 07:50:32 Set A/D channel type result=40 07:50:32 Set A/D encoding result=40 07:50:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:32 Set channel filter=0.000000e+000 result=40 07:50:32 Config A/D Result=40 07:50:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:32 Get A/D filter: -9.255963e+061 result=40 07:50:32 Get A/D value=-858993460 result=40 07:50:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:32 Parameters OK 07:50:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:32 Set A/D data flow result=40 07:50:32 Set A/D channel type result=40 07:50:32 Set A/D encoding result=40 07:50:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:32 Set channel filter=0.000000e+000 result=40 07:50:32 Config A/D Result=40 07:50:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:32 Get A/D filter: -9.255963e+061 result=40 07:50:32 Get A/D value=-858993460 result=40 07:50:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:32 Aux= 07:50:32 Message to Camera, serial 267562 queued 07:51:09 Received message from Master: op=PointingHead serial=267575 07:51:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:51:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:51:10 Point started: ret=0 07:51:10 point_skyscan result=0 07:51:10 Check angles 07:51:10 SkyScan query 07:51:11 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.035<-13469 Statuses=0009 0009 07:51:11 Msec=0 True Az=153.18 Ze=-22.035 Az status=0009 Ze status=0009 07:51:11 Check angles 07:51:11 SkyScan query 07:51:12 SkyScan query done: ret=0 az=135.72<-9048 ze=-1.005<-12067 Statuses=0009 0009 07:51:12 Msec=750 True Az=135.72 Ze=-1.005 Az status=0009 Ze status=0009 07:51:12 Check angles 07:51:12 SkyScan query 07:51:12 SkyScan query done: ret=0 az=118.23<-7882 ze=19.89<-10674 Statuses=0009 0009 07:51:12 Msec=1500 True Az=118.23 Ze=19.89 Az status=0009 Ze status=0009 07:51:13 Check angles 07:51:13 SkyScan query 07:51:13 SkyScan query done: ret=0 az=100.455<-6697 ze=41.355<-9243 Statuses=0009 0009 07:51:13 Msec=2250 True Az=100.455 Ze=41.355 Az status=0009 Ze status=0009 07:51:13 Check angles 07:51:13 SkyScan query 07:51:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 07:51:14 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 07:51:14 Check angles 07:51:14 SkyScan query 07:51:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:51:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:51:15 Message to Master queued w/err=0: serial=267575 error=0 07:51:20 Received message from Master: op=Filter serial=267576 07:51:20 Color wheel filter change from 0 to 0 07:51:20 FLIGetFilterPos err=0 currentPosition=0 07:51:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:20 Filter is already there-color wheel unchanged 07:51:20 Received message from Master: op=Shutter serial=267577 07:51:20 Shutter LASER close 07:51:20 Received message from Camera: op=State serial=267579 07:51:20 GetSingleValue result=40 Value=cccccccc 07:51:20 SkyScan query 07:51:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:51:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:20 Parameters OK 07:51:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:20 Set A/D data flow result=40 07:51:20 Set A/D channel type result=40 07:51:20 Set A/D encoding result=40 07:51:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:20 Set channel filter=0.000000e+000 result=40 07:51:20 Config A/D Result=40 07:51:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:20 Get A/D filter: -9.255963e+061 result=40 07:51:20 Get A/D value=-858993460 result=40 07:51:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:20 Parameters OK 07:51:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:20 Set A/D data flow result=40 07:51:20 Set A/D channel type result=40 07:51:20 Set A/D encoding result=40 07:51:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:20 Set channel filter=0.000000e+000 result=40 07:51:20 Config A/D Result=40 07:51:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:20 Get A/D filter: -9.255963e+061 result=40 07:51:20 Get A/D value=-858993460 result=40 07:51:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:20 Aux= 07:51:20 Message to Camera, serial 267579 queued 07:51:57 Received message from Master: op=PointingHead serial=267592 07:51:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:51:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:51:58 Point started: ret=0 07:51:58 point_skyscan result=0 07:51:58 Check angles 07:51:58 SkyScan query 07:51:59 SkyScan query done: ret=0 az=85.995<-5733 ze=21.36<-10576 Statuses=0008 0009 07:51:59 Msec=0 True Az=85.995 Ze=21.36 Az status=0008 Ze status=0009 07:51:59 Check angles 07:51:59 SkyScan query 07:52:00 SkyScan query done: ret=0 az=86.01<-5734 ze=0.45<-11970 Statuses=0008 0009 07:52:00 Msec=750 True Az=86.01 Ze=0.45 Az status=0008 Ze status=0009 07:52:00 Check angles 07:52:00 SkyScan query 07:52:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.55<-13370 Statuses=0008 0009 07:52:01 Msec=1500 True Az=85.995 Ze=-20.55 Az status=0008 Ze status=0009 07:52:01 Check angles 07:52:01 SkyScan query 07:52:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.955<-14797 Statuses=0008 0009 07:52:01 Msec=2250 True Az=85.995 Ze=-41.955 Az status=0008 Ze status=0009 07:52:01 Check angles 07:52:01 SkyScan query 07:52:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:52:02 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:52:02 Message to Master queued w/err=0: serial=267592 error=0 07:52:07 Received message from Master: op=Filter serial=267593 07:52:07 Color wheel filter change from 0 to 0 07:52:07 FLIGetFilterPos err=0 currentPosition=0 07:52:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:07 Filter is already there-color wheel unchanged 07:52:07 Received message from Master: op=Shutter serial=267594 07:52:07 Shutter LASER close 07:52:07 Received message from Camera: op=State serial=267596 07:52:07 GetSingleValue result=40 Value=cccccccc 07:52:07 SkyScan query 07:52:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:08 Parameters OK 07:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:08 Set A/D data flow result=40 07:52:08 Set A/D channel type result=40 07:52:08 Set A/D encoding result=40 07:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:08 Set channel filter=0.000000e+000 result=40 07:52:08 Config A/D Result=40 07:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:08 Get A/D filter: -9.255963e+061 result=40 07:52:08 Get A/D value=-858993460 result=40 07:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:08 Parameters OK 07:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:08 Set A/D data flow result=40 07:52:08 Set A/D channel type result=40 07:52:08 Set A/D encoding result=40 07:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:08 Set channel filter=0.000000e+000 result=40 07:52:08 Config A/D Result=40 07:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:08 Get A/D filter: -9.255963e+061 result=40 07:52:08 Get A/D value=-858993460 result=40 07:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:08 Aux= 07:52:08 Message to Camera, serial 267596 queued 07:52:45 Received message from Master: op=PointingHead serial=267609 07:52:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:52:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:52:45 Point started: ret=0 07:52:45 point_skyscan result=0 07:52:46 Check angles 07:52:46 SkyScan query 07:52:46 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.24<-17416 Statuses=0009 0009 07:52:46 Msec=0 True Az=109.035 Ze=-81.24 Az status=0009 Ze status=0009 07:52:47 Check angles 07:52:47 SkyScan query 07:52:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 07:52:47 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 07:52:47 Check angles 07:52:47 SkyScan query 07:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 07:52:48 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 07:52:48 Check angles 07:52:48 SkyScan query 07:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.075<-21605 Statuses=0008 0009 07:52:49 Msec=2250 True Az=112.995 Ze=-144.075 Az status=0008 Ze status=0009 07:52:49 Check angles 07:52:49 SkyScan query 07:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.045<-23003 Statuses=0008 0009 07:52:49 Msec=3000 True Az=112.995 Ze=-165.045 Az status=0008 Ze status=0009 07:52:50 Check angles 07:52:50 SkyScan query 07:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:52:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:52:50 Message to Master queued w/err=0: serial=267609 error=0 07:52:55 Received message from Master: op=Filter serial=267610 07:52:55 Color wheel filter change from 0 to 0 07:52:55 FLIGetFilterPos err=0 currentPosition=0 07:52:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:55 Filter is already there-color wheel unchanged 07:52:55 Received message from Master: op=Shutter serial=267611 07:52:55 Shutter LASER open 07:52:55 Received message from Camera: op=State serial=267613 07:52:55 GetSingleValue result=40 Value=cccccccc 07:52:55 SkyScan query 07:52:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:52:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:56 Parameters OK 07:52:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:56 Set A/D data flow result=40 07:52:56 Set A/D channel type result=40 07:52:56 Set A/D encoding result=40 07:52:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:56 Set channel filter=0.000000e+000 result=40 07:52:56 Config A/D Result=40 07:52:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:56 Get A/D filter: -9.255963e+061 result=40 07:52:56 Get A/D value=-858993460 result=40 07:52:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:56 Parameters OK 07:52:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:56 Set A/D data flow result=40 07:52:56 Set A/D channel type result=40 07:52:56 Set A/D encoding result=40 07:52:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:56 Set channel filter=0.000000e+000 result=40 07:52:56 Config A/D Result=40 07:52:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:56 Get A/D filter: -9.255963e+061 result=40 07:52:56 Get A/D value=-858993460 result=40 07:52:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:56 Aux= 07:52:56 Message to Camera, serial 267613 queued 07:53:04 Received message from Master: op=Shutter serial=267623 07:53:04 Shutter LASER close 07:53:05 Received message from Master: op=PointingHead serial=267627 07:53:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:53:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:53:05 Point started: ret=0 07:53:05 point_skyscan result=0 07:53:06 Check angles 07:53:06 SkyScan query 07:53:07 SkyScan query done: ret=0 az=89.595<-5973 ze=156.81<-1546 Statuses=0009 0009 07:53:07 Msec=0 True Az=89.595 Ze=156.81 Az status=0009 Ze status=0009 07:53:07 Check angles 07:53:07 SkyScan query 07:53:07 SkyScan query done: ret=0 az=72.09<-4806 ze=135.885<-2941 Statuses=0009 0009 07:53:07 Msec=750 True Az=72.09 Ze=135.885 Az status=0009 Ze status=0009 07:53:08 Check angles 07:53:08 SkyScan query 07:53:08 SkyScan query done: ret=0 az=54.675<-3645 ze=114.825<-4345 Statuses=0009 0009 07:53:08 Msec=1500 True Az=54.675 Ze=114.825 Az status=0009 Ze status=0009 07:53:08 Check angles 07:53:08 SkyScan query 07:53:09 SkyScan query done: ret=0 az=40.98<-2732 ze=93.93<-5738 Statuses=0009 0009 07:53:09 Msec=2250 True Az=40.98 Ze=93.93 Az status=0009 Ze status=0009 07:53:09 Check angles 07:53:09 SkyScan query 07:53:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.93<-7138 Statuses=0008 0009 07:53:10 Msec=3000 True Az=40.995 Ze=72.93 Az status=0008 Ze status=0009 07:53:10 Check angles 07:53:10 SkyScan query 07:53:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 07:53:10 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 07:53:11 Check angles 07:53:11 SkyScan query 07:53:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:53:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:53:11 Message to Master queued w/err=0: serial=267627 error=0 07:53:16 Received message from Master: op=Filter serial=267628 07:53:16 Color wheel filter change from 0 to 0 07:53:16 FLIGetFilterPos err=0 currentPosition=0 07:53:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:16 Filter is already there-color wheel unchanged 07:53:16 Received message from Master: op=Shutter serial=267629 07:53:16 Shutter LASER close 07:53:16 Received message from Camera: op=State serial=267631 07:53:16 GetSingleValue result=40 Value=cccccccc 07:53:16 SkyScan query 07:53:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:53:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:17 Parameters OK 07:53:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:17 Set A/D data flow result=40 07:53:17 Set A/D channel type result=40 07:53:17 Set A/D encoding result=40 07:53:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:17 Set channel filter=0.000000e+000 result=40 07:53:17 Config A/D Result=40 07:53:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:17 Get A/D filter: -9.255963e+061 result=40 07:53:17 Get A/D value=-858993460 result=40 07:53:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:17 Parameters OK 07:53:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:17 Set A/D data flow result=40 07:53:17 Set A/D channel type result=40 07:53:17 Set A/D encoding result=40 07:53:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:17 Set channel filter=0.000000e+000 result=40 07:53:17 Config A/D Result=40 07:53:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:17 Get A/D filter: -9.255963e+061 result=40 07:53:17 Get A/D value=-858993460 result=40 07:53:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:17 Aux= 07:53:17 Message to Camera, serial 267631 queued 07:53:54 Received message from Master: op=PointingHead serial=267644 07:53:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:53:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:53:55 Point started: ret=0 07:53:55 point_skyscan result=0 07:53:55 Check angles 07:53:55 SkyScan query 07:53:56 SkyScan query done: ret=0 az=64.245<-4283 ze=81.75<-6550 Statuses=0009 0009 07:53:56 Msec=0 True Az=64.245 Ze=81.75 Az status=0009 Ze status=0009 07:53:56 Check angles 07:53:56 SkyScan query 07:53:57 SkyScan query done: ret=0 az=81.735<-5449 ze=102.66<-5156 Statuses=0009 0009 07:53:57 Msec=750 True Az=81.735 Ze=102.66 Az status=0009 Ze status=0009 07:53:57 Check angles 07:53:57 SkyScan query 07:53:57 SkyScan query done: ret=0 az=99.33<-6622 ze=123.6<-3760 Statuses=0009 0009 07:53:57 Msec=1500 True Az=99.33 Ze=123.6 Az status=0009 Ze status=0009 07:53:58 Check angles 07:53:58 SkyScan query 07:53:58 SkyScan query done: ret=0 az=116.745<-7783 ze=144.54<-2364 Statuses=0009 0009 07:53:58 Msec=2250 True Az=116.745 Ze=144.54 Az status=0009 Ze status=0009 07:53:58 Check angles 07:53:58 SkyScan query 07:53:59 SkyScan query done: ret=0 az=130.995<-8733 ze=165.51<-966 Statuses=0009 0009 07:53:59 Msec=3000 True Az=130.995 Ze=165.51 Az status=0009 Ze status=0009 07:53:59 Check angles 07:53:59 SkyScan query 07:54:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.535<-23569 Statuses=0008 0009 07:54:00 Msec=3750 True Az=130.995 Ze=-173.535 Az status=0008 Ze status=0009 07:54:00 Check angles 07:54:00 SkyScan query 07:54:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.58<-22172 Statuses=0008 0009 07:54:00 Msec=4500 True Az=130.995 Ze=-152.58 Az status=0008 Ze status=0009 07:54:01 Check angles 07:54:01 SkyScan query 07:54:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 07:54:01 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 07:54:01 Message to Master queued w/err=0: serial=267644 error=0 07:54:06 Received message from Master: op=Filter serial=267645 07:54:06 Color wheel filter change from 0 to 0 07:54:06 FLIGetFilterPos err=0 currentPosition=0 07:54:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:06 Filter is already there-color wheel unchanged 07:54:06 Received message from Master: op=Shutter serial=267646 07:54:06 Shutter LASER close 07:54:06 Received message from Camera: op=State serial=267648 07:54:06 GetSingleValue result=40 Value=cccccccc 07:54:06 SkyScan query 07:54:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:54:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:07 Parameters OK 07:54:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:07 Set A/D data flow result=40 07:54:07 Set A/D channel type result=40 07:54:07 Set A/D encoding result=40 07:54:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:07 Set channel filter=0.000000e+000 result=40 07:54:07 Config A/D Result=40 07:54:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:07 Get A/D filter: -9.255963e+061 result=40 07:54:07 Get A/D value=-858993460 result=40 07:54:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:07 Parameters OK 07:54:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:07 Set A/D data flow result=40 07:54:07 Set A/D channel type result=40 07:54:07 Set A/D encoding result=40 07:54:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:07 Set channel filter=0.000000e+000 result=40 07:54:07 Config A/D Result=40 07:54:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:07 Get A/D filter: -9.255963e+061 result=40 07:54:07 Get A/D value=-858993460 result=40 07:54:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:07 Aux= 07:54:07 Message to Camera, serial 267648 queued 07:54:44 Received message from Master: op=PointingHead serial=267661 07:54:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:54:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:54:44 Point started: ret=0 07:54:44 point_skyscan result=0 07:54:45 Check angles 07:54:45 SkyScan query 07:54:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.48<-23432 Statuses=0009 0009 07:54:46 Msec=0 True Az=112.995 Ze=-171.48 Az status=0009 Ze status=0009 07:54:46 Check angles 07:54:46 SkyScan query 07:54:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:54:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:54:46 Message to Master queued w/err=0: serial=267661 error=0 07:54:51 Received message from Master: op=Filter serial=267662 07:54:51 Color wheel filter change from 0 to 0 07:54:51 FLIGetFilterPos err=0 currentPosition=0 07:54:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:51 Filter is already there-color wheel unchanged 07:54:51 Received message from Master: op=Shutter serial=267663 07:54:51 Shutter LASER open 07:54:52 Received message from Camera: op=State serial=267665 07:54:52 GetSingleValue result=40 Value=cccccccc 07:54:52 SkyScan query 07:54:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 [UTC 2018-12-19 07:54:52] 07:54:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:52 Parameters OK 07:54:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:52 Set A/D data flow result=40 07:54:52 Set A/D channel type result=40 07:54:52 Set A/D encoding result=40 07:54:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:52 Set channel filter=0.000000e+000 result=40 07:54:52 Config A/D Result=40 07:54:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:52 Get A/D filter: -9.255963e+061 result=40 07:54:52 Get A/D value=-858993460 result=40 07:54:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:52 Parameters OK 07:54:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:52 Set A/D data flow result=40 07:54:52 Set A/D channel type result=40 07:54:52 Set A/D encoding result=40 07:54:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:52 Set channel filter=0.000000e+000 result=40 07:54:52 Config A/D Result=40 07:54:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:52 Get A/D filter: -9.255963e+061 result=40 07:54:52 Get A/D value=-858993460 result=40 07:54:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:52 Aux= 07:54:52 Message to Camera, serial 267665 queued 07:55:01 Received message from Master: op=Shutter serial=267675 07:55:01 Shutter LASER close 07:55:01 Received message from Master: op=PointingHead serial=267679 07:55:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:55:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:55:02 Point started: ret=0 07:55:02 point_skyscan result=0 07:55:02 Check angles 07:55:02 SkyScan query 07:55:03 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.55<-21570 Statuses=0009 0009 07:55:03 Msec=0 True Az=135.705 Ze=-143.55 Az status=0009 Ze status=0009 07:55:03 Check angles 07:55:03 SkyScan query 07:55:04 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.58<-20172 Statuses=0009 0009 07:55:04 Msec=750 True Az=153.24 Ze=-122.58 Az status=0009 Ze status=0009 07:55:04 Check angles 07:55:04 SkyScan query 07:55:04 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.7<-18780 Statuses=0009 0009 07:55:04 Msec=1500 True Az=170.79 Ze=-101.7 Az status=0009 Ze status=0009 07:55:05 Check angles 07:55:05 SkyScan query 07:55:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.655<-17377 Statuses=0008 0009 07:55:05 Msec=2250 True Az=176.01 Ze=-80.655 Az status=0008 Ze status=0009 07:55:05 Check angles 07:55:05 SkyScan query 07:55:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.745<-15983 Statuses=0008 0009 07:55:06 Msec=3000 True Az=176.01 Ze=-59.745 Az status=0008 Ze status=0009 07:55:06 Check angles 07:55:06 SkyScan query 07:55:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:55:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:55:07 Message to Master queued w/err=0: serial=267679 error=0 07:55:12 Received message from Master: op=Filter serial=267680 07:55:12 Color wheel filter change from 0 to 0 07:55:12 FLIGetFilterPos err=0 currentPosition=0 07:55:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:12 Filter is already there-color wheel unchanged 07:55:12 Received message from Master: op=Shutter serial=267681 07:55:12 Shutter LASER close 07:55:12 Received message from Camera: op=State serial=267683 07:55:12 GetSingleValue result=40 Value=cccccccc 07:55:12 SkyScan query 07:55:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:55:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:13 Parameters OK 07:55:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:13 Set A/D data flow result=40 07:55:13 Set A/D channel type result=40 07:55:13 Set A/D encoding result=40 07:55:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:13 Set channel filter=0.000000e+000 result=40 07:55:13 Config A/D Result=40 07:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:13 Get A/D filter: -9.255963e+061 result=40 07:55:13 Get A/D value=-858993460 result=40 07:55:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:13 Parameters OK 07:55:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:13 Set A/D data flow result=40 07:55:13 Set A/D channel type result=40 07:55:13 Set A/D encoding result=40 07:55:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:13 Set channel filter=0.000000e+000 result=40 07:55:13 Config A/D Result=40 07:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:13 Get A/D filter: -9.255963e+061 result=40 07:55:13 Get A/D value=-858993460 result=40 07:55:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:13 Aux= 07:55:13 Message to Camera, serial 267683 queued 07:55:49 Received message from Master: op=PointingHead serial=267696 07:55:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:55:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:55:50 Point started: ret=0 07:55:50 point_skyscan result=0 07:55:51 Check angles 07:55:51 SkyScan query 07:55:51 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.87<-13458 Statuses=0009 0009 07:55:51 Msec=0 True Az=152.985 Ze=-21.87 Az status=0009 Ze status=0009 07:55:51 Check angles 07:55:51 SkyScan query 07:55:52 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.825<-12055 Statuses=0009 0009 07:55:52 Msec=750 True Az=135.57 Ze=-0.825 Az status=0009 Ze status=0009 07:55:52 Check angles 07:55:52 SkyScan query 07:55:53 SkyScan query done: ret=0 az=118.065<-7871 ze=20.07<-10662 Statuses=0009 0009 07:55:53 Msec=1500 True Az=118.065 Ze=20.07 Az status=0009 Ze status=0009 [UTC 2018-12-19 07:55:53] 07:55:53 Check angles 07:55:53 SkyScan query 07:55:53 SkyScan query done: ret=0 az=100.695<-6713 ze=41.085<-9261 Statuses=0009 0009 07:55:53 Msec=2250 True Az=100.695 Ze=41.085 Az status=0009 Ze status=0009 07:55:54 Check angles 07:55:54 SkyScan query 07:55:54 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 07:55:54 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 07:55:54 Check angles 07:55:54 SkyScan query 07:55:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:55:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:55:55 Message to Master queued w/err=0: serial=267696 error=0 07:56:00 Received message from Master: op=Filter serial=267697 07:56:00 Color wheel filter change from 0 to 0 07:56:00 FLIGetFilterPos err=0 currentPosition=0 07:56:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:00 Filter is already there-color wheel unchanged 07:56:00 Received message from Master: op=Shutter serial=267698 07:56:00 Shutter LASER close 07:56:00 Received message from Camera: op=State serial=267700 07:56:00 GetSingleValue result=40 Value=cccccccc 07:56:00 SkyScan query 07:56:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:56:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:01 Parameters OK 07:56:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:01 Set A/D data flow result=40 07:56:01 Set A/D channel type result=40 07:56:01 Set A/D encoding result=40 07:56:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:01 Set channel filter=0.000000e+000 result=40 07:56:01 Config A/D Result=40 07:56:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:01 Get A/D filter: -9.255963e+061 result=40 07:56:01 Get A/D value=-858993460 result=40 07:56:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:01 Parameters OK 07:56:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:01 Set A/D data flow result=40 07:56:01 Set A/D channel type result=40 07:56:01 Set A/D encoding result=40 07:56:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:01 Set channel filter=0.000000e+000 result=40 07:56:01 Config A/D Result=40 07:56:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:01 Get A/D filter: -9.255963e+061 result=40 07:56:01 Get A/D value=-858993460 result=40 07:56:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:01 Aux= 07:56:01 Message to Camera, serial 267700 queued 07:56:38 Received message from Master: op=PointingHead serial=267713 07:56:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:56:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:56:38 Point started: ret=0 07:56:38 point_skyscan result=0 07:56:39 Check angles 07:56:39 SkyScan query 07:56:39 SkyScan query done: ret=0 az=85.995<-5733 ze=21.15<-10590 Statuses=0008 0009 07:56:39 Msec=0 True Az=85.995 Ze=21.15 Az status=0008 Ze status=0009 07:56:39 Check angles 07:56:39 SkyScan query 07:56:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.255<-12017 Statuses=0008 0009 07:56:40 Msec=750 True Az=85.995 Ze=-0.255 Az status=0008 Ze status=0009 07:56:40 Check angles 07:56:40 SkyScan query 07:56:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.18<-13412 Statuses=0008 0009 07:56:41 Msec=1500 True Az=85.995 Ze=-21.18 Az status=0008 Ze status=0009 07:56:41 Check angles 07:56:41 SkyScan query 07:56:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.18<-14812 Statuses=0008 0009 07:56:42 Msec=2250 True Az=85.995 Ze=-42.18 Az status=0008 Ze status=0009 07:56:42 Check angles 07:56:42 SkyScan query 07:56:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:56:42 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:56:42 Message to Master queued w/err=0: serial=267713 error=0 07:56:47 Received message from Master: op=Filter serial=267714 07:56:47 Color wheel filter change from 0 to 0 07:56:47 FLIGetFilterPos err=0 currentPosition=0 07:56:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:47 Filter is already there-color wheel unchanged 07:56:47 Received message from Master: op=Shutter serial=267715 07:56:47 Shutter LASER close 07:56:48 Received message from Camera: op=State serial=267717 07:56:48 GetSingleValue result=40 Value=cccccccc 07:56:48 SkyScan query 07:56:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:56:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:48 Parameters OK 07:56:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:48 Set A/D data flow result=40 07:56:48 Set A/D channel type result=40 07:56:48 Set A/D encoding result=40 07:56:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:48 Set channel filter=0.000000e+000 result=40 07:56:48 Config A/D Result=40 07:56:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:48 Get A/D filter: -9.255963e+061 result=40 07:56:48 Get A/D value=-858993460 result=40 07:56:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:48 Parameters OK 07:56:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:48 Set A/D data flow result=40 07:56:48 Set A/D channel type result=40 07:56:48 Set A/D encoding result=40 07:56:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:48 Set channel filter=0.000000e+000 result=40 07:56:48 Config A/D Result=40 07:56:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:48 Get A/D filter: -9.255963e+061 result=40 07:56:48 Get A/D value=-858993460 result=40 07:56:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:48 Aux= 07:56:48 Message to Camera, serial 267717 queued 07:57:25 Received message from Master: op=PointingHead serial=267730 07:57:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:57:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:57:25 Point started: ret=0 07:57:25 point_skyscan result=0 07:57:26 Check angles 07:57:26 SkyScan query 07:57:27 SkyScan query done: ret=0 az=109.05<-7270 ze=-81.33<-17422 Statuses=0009 0009 07:57:27 Msec=0 True Az=109.05 Ze=-81.33 Az status=0009 Ze status=0009 07:57:27 Check angles 07:57:27 SkyScan query 07:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 07:57:27 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 07:57:28 Check angles 07:57:28 SkyScan query 07:57:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.255<-20217 Statuses=0008 0009 07:57:28 Msec=1500 True Az=112.995 Ze=-123.255 Az status=0008 Ze status=0009 07:57:28 Check angles 07:57:28 SkyScan query 07:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.165<-21611 Statuses=0008 0009 07:57:29 Msec=2250 True Az=112.995 Ze=-144.165 Az status=0008 Ze status=0009 07:57:29 Check angles 07:57:29 SkyScan query 07:57:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 07:57:30 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 07:57:30 Check angles 07:57:30 SkyScan query 07:57:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:57:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:57:30 Message to Master queued w/err=0: serial=267730 error=0 07:57:35 Received message from Master: op=Filter serial=267731 07:57:35 Color wheel filter change from 0 to 0 07:57:35 FLIGetFilterPos err=0 currentPosition=0 07:57:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:35 Filter is already there-color wheel unchanged 07:57:36 Received message from Master: op=Shutter serial=267732 07:57:36 Shutter LASER open 07:57:36 Received message from Camera: op=State serial=267734 07:57:36 GetSingleValue result=40 Value=cccccccc 07:57:36 SkyScan query 07:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:57:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:36 Parameters OK 07:57:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:36 Set A/D data flow result=40 07:57:36 Set A/D channel type result=40 07:57:36 Set A/D encoding result=40 07:57:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:36 Set channel filter=0.000000e+000 result=40 07:57:36 Config A/D Result=40 07:57:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:36 Get A/D filter: -9.255963e+061 result=40 07:57:36 Get A/D value=-858993460 result=40 07:57:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:36 Parameters OK 07:57:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:36 Set A/D data flow result=40 07:57:36 Set A/D channel type result=40 07:57:36 Set A/D encoding result=40 07:57:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:36 Set channel filter=0.000000e+000 result=40 07:57:36 Config A/D Result=40 07:57:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:36 Get A/D filter: -9.255963e+061 result=40 07:57:36 Get A/D value=-858993460 result=40 07:57:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:36 Aux= 07:57:36 Message to Camera, serial 267734 queued 07:57:45 Received message from Master: op=Shutter serial=267744 07:57:45 Shutter LASER close 07:57:45 Received message from Master: op=PointingHead serial=267748 07:57:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:57:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:57:46 Point started: ret=0 07:57:46 point_skyscan result=0 07:57:46 Check angles 07:57:46 SkyScan query 07:57:47 SkyScan query done: ret=0 az=89.595<-5973 ze=156.885<-1541 Statuses=0009 0009 07:57:47 Msec=0 True Az=89.595 Ze=156.885 Az status=0009 Ze status=0009 07:57:47 Check angles 07:57:47 SkyScan query 07:57:48 SkyScan query done: ret=0 az=72.075<-4805 ze=135.96<-2936 Statuses=0009 0009 07:57:48 Msec=750 True Az=72.075 Ze=135.96 Az status=0009 Ze status=0009 07:57:48 Check angles 07:57:48 SkyScan query 07:57:48 SkyScan query done: ret=0 az=54.675<-3645 ze=114.93<-4338 Statuses=0009 0009 07:57:48 Msec=1500 True Az=54.675 Ze=114.93 Az status=0009 Ze status=0009 07:57:49 Check angles 07:57:49 SkyScan query 07:57:49 SkyScan query done: ret=0 az=40.965<-2731 ze=93.555<-5763 Statuses=0009 0009 07:57:49 Msec=2250 True Az=40.965 Ze=93.555 Az status=0009 Ze status=0009 07:57:49 Check angles 07:57:49 SkyScan query 07:57:50 SkyScan query done: ret=0 az=40.98<-2732 ze=72.18<-7188 Statuses=0008 0009 07:57:50 Msec=3000 True Az=40.98 Ze=72.18 Az status=0008 Ze status=0009 07:57:50 Check angles 07:57:50 SkyScan query 07:57:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.125<-8525 Statuses=0008 0009 07:57:51 Msec=3750 True Az=40.995 Ze=52.125 Az status=0008 Ze status=0009 07:57:51 Check angles 07:57:51 SkyScan query 07:57:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:57:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:57:51 Message to Master queued w/err=0: serial=267748 error=0 07:57:56 Received message from Master: op=Filter serial=267749 07:57:56 Color wheel filter change from 0 to 0 07:57:56 FLIGetFilterPos err=0 currentPosition=0 07:57:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:56 Filter is already there-color wheel unchanged 07:57:57 Received message from Master: op=Shutter serial=267750 07:57:57 Shutter LASER close 07:57:57 Received message from Camera: op=State serial=267752 07:57:57 GetSingleValue result=40 Value=cccccccc 07:57:57 SkyScan query 07:57:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:57:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:57 Parameters OK 07:57:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:57 Set A/D data flow result=40 07:57:57 Set A/D channel type result=40 07:57:57 Set A/D encoding result=40 07:57:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:57 Set channel filter=0.000000e+000 result=40 07:57:57 Config A/D Result=40 07:57:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:57 Get A/D filter: -9.255963e+061 result=40 07:57:57 Get A/D value=-858993460 result=40 07:57:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:57 Parameters OK 07:57:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:57 Set A/D data flow result=40 07:57:57 Set A/D channel type result=40 07:57:57 Set A/D encoding result=40 07:57:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:57 Set channel filter=0.000000e+000 result=40 07:57:57 Config A/D Result=40 07:57:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:57 Get A/D filter: -9.255963e+061 result=40 07:57:57 Get A/D value=-858993460 result=40 07:57:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:57 Aux= 07:57:57 Message to Camera, serial 267752 queued 07:58:35 Received message from Master: op=PointingHead serial=267765 07:58:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:58:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:58:35 Point started: ret=0 07:58:35 point_skyscan result=0 07:58:36 Check angles 07:58:36 SkyScan query 07:58:36 SkyScan query done: ret=0 az=64.485<-4299 ze=81.72<-6552 Statuses=0009 0009 07:58:36 Msec=0 True Az=64.485 Ze=81.72 Az status=0009 Ze status=0009 07:58:36 Check angles 07:58:36 SkyScan query 07:58:37 SkyScan query done: ret=0 az=81.81<-5454 ze=102.63<-5158 Statuses=0009 0009 07:58:37 Msec=750 True Az=81.81 Ze=102.63 Az status=0009 Ze status=0009 07:58:37 Check angles 07:58:37 SkyScan query 07:58:38 SkyScan query done: ret=0 az=99.72<-6648 ze=124.05<-3730 Statuses=0009 0009 07:58:38 Msec=1500 True Az=99.72 Ze=124.05 Az status=0009 Ze status=0009 07:58:38 Check angles 07:58:38 SkyScan query 07:58:39 SkyScan query done: ret=0 az=117.15<-7810 ze=144.96<-2336 Statuses=0009 0009 07:58:39 Msec=2250 True Az=117.15 Ze=144.96 Az status=0009 Ze status=0009 07:58:39 Check angles 07:58:39 SkyScan query 07:58:39 SkyScan query done: ret=0 az=131.025<-8735 ze=165.945<-937 Statuses=0009 0009 07:58:39 Msec=3000 True Az=131.025 Ze=165.945 Az status=0009 Ze status=0009 07:58:39 Check angles 07:58:39 SkyScan query 07:58:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.085<-23539 Statuses=0008 0009 07:58:40 Msec=3750 True Az=130.995 Ze=-173.085 Az status=0008 Ze status=0009 07:58:40 Check angles 07:58:40 SkyScan query 07:58:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.175<-22145 Statuses=0008 0009 07:58:41 Msec=4500 True Az=130.995 Ze=-152.175 Az status=0008 Ze status=0009 07:58:41 Check angles 07:58:41 SkyScan query 07:58:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 07:58:42 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 07:58:42 Message to Master queued w/err=0: serial=267765 error=0 07:58:47 Received message from Master: op=Filter serial=267766 07:58:47 Color wheel filter change from 0 to 0 07:58:47 FLIGetFilterPos err=0 currentPosition=0 07:58:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:47 Filter is already there-color wheel unchanged 07:58:47 Received message from Master: op=Shutter serial=267767 07:58:47 Shutter LASER close 07:58:47 Received message from Camera: op=State serial=267769 07:58:47 GetSingleValue result=40 Value=cccccccc 07:58:47 SkyScan query 07:58:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:58:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:47 Parameters OK 07:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:47 Set A/D data flow result=40 07:58:47 Set A/D channel type result=40 07:58:47 Set A/D encoding result=40 07:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:47 Set channel filter=0.000000e+000 result=40 07:58:47 Config A/D Result=40 07:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:47 Get A/D filter: -9.255963e+061 result=40 07:58:47 Get A/D value=-858993460 result=40 07:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:47 Parameters OK 07:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:47 Set A/D data flow result=40 07:58:47 Set A/D channel type result=40 07:58:47 Set A/D encoding result=40 07:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:47 Set channel filter=0.000000e+000 result=40 07:58:47 Config A/D Result=40 07:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:47 Get A/D filter: -9.255963e+061 result=40 07:58:47 Get A/D value=-858993460 result=40 07:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:47 Aux= 07:58:47 Message to Camera, serial 267769 queued 07:59:24 Received message from Master: op=PointingHead serial=267782 07:59:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:59:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:59:25 Point started: ret=0 07:59:25 point_skyscan result=0 07:59:25 Check angles 07:59:25 SkyScan query 07:59:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 07:59:26 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 07:59:26 Check angles 07:59:26 SkyScan query 07:59:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:59:27 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:59:27 Message to Master queued w/err=0: serial=267782 error=0 07:59:32 Received message from Master: op=Filter serial=267783 07:59:32 Color wheel filter change from 0 to 0 07:59:32 FLIGetFilterPos err=0 currentPosition=0 07:59:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:32 Filter is already there-color wheel unchanged 07:59:32 Received message from Master: op=Shutter serial=267784 07:59:32 Shutter LASER open 07:59:32 Received message from Camera: op=State serial=267786 07:59:32 GetSingleValue result=40 Value=cccccccc 07:59:32 SkyScan query 07:59:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:59:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:33 Parameters OK 07:59:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:33 Set A/D data flow result=40 07:59:33 Set A/D channel type result=40 07:59:33 Set A/D encoding result=40 07:59:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:33 Set channel filter=0.000000e+000 result=40 07:59:33 Config A/D Result=40 07:59:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:33 Get A/D filter: -9.255963e+061 result=40 07:59:33 Get A/D value=-858993460 result=40 07:59:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:33 Parameters OK 07:59:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:33 Set A/D data flow result=40 07:59:33 Set A/D channel type result=40 07:59:33 Set A/D encoding result=40 07:59:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:33 Set channel filter=0.000000e+000 result=40 07:59:33 Config A/D Result=40 07:59:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:33 Get A/D filter: -9.255963e+061 result=40 07:59:33 Get A/D value=-858993460 result=40 07:59:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:33 Aux= 07:59:33 Message to Camera, serial 267786 queued 07:59:41 Received message from Master: op=Shutter serial=267796 07:59:41 Shutter LASER close 07:59:42 Received message from Master: op=PointingHead serial=267800 07:59:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:59:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:59:42 Point started: ret=0 07:59:42 point_skyscan result=0 07:59:43 Check angles 07:59:43 SkyScan query 07:59:43 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.28<-21552 Statuses=0009 0009 07:59:43 Msec=0 True Az=136.11 Ze=-143.28 Az status=0009 Ze status=0009 07:59:43 Check angles 07:59:43 SkyScan query 07:59:44 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.31<-20154 Statuses=0009 0009 07:59:44 Msec=750 True Az=153.51 Ze=-122.31 Az status=0009 Ze status=0009 07:59:44 Check angles 07:59:44 SkyScan query 07:59:45 SkyScan query done: ret=0 az=171.03<-11402 ze=-101.43<-18762 Statuses=0009 0009 07:59:45 Msec=1500 True Az=171.03 Ze=-101.43 Az status=0009 Ze status=0009 07:59:45 Check angles 07:59:45 SkyScan query 07:59:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.415<-17361 Statuses=0008 0009 07:59:45 Msec=2250 True Az=176.01 Ze=-80.415 Az status=0008 Ze status=0009 07:59:46 Check angles 07:59:46 SkyScan query 07:59:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.46<-15964 Statuses=0008 0009 07:59:46 Msec=3000 True Az=176.01 Ze=-59.46 Az status=0008 Ze status=0009 07:59:46 Check angles 07:59:46 SkyScan query 07:59:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:59:47 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:59:47 Message to Master queued w/err=0: serial=267800 error=0 07:59:52 Received message from Master: op=Filter serial=267801 07:59:52 Color wheel filter change from 0 to 0 07:59:52 FLIGetFilterPos err=0 currentPosition=0 07:59:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:52 Filter is already there-color wheel unchanged 07:59:52 Received message from Master: op=Shutter serial=267802 07:59:52 Shutter LASER close 07:59:52 Received message from Camera: op=State serial=267804 07:59:52 GetSingleValue result=40 Value=cccccccc 07:59:52 SkyScan query 07:59:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:59:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:53 Parameters OK 07:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:53 Set A/D data flow result=40 07:59:53 Set A/D channel type result=40 07:59:53 Set A/D encoding result=40 07:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:53 Set channel filter=0.000000e+000 result=40 07:59:53 Config A/D Result=40 07:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:53 Get A/D filter: -9.255963e+061 result=40 07:59:53 Get A/D value=-858993460 result=40 07:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:53 Parameters OK 07:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:53 Set A/D data flow result=40 07:59:53 Set A/D channel type result=40 07:59:53 Set A/D encoding result=40 07:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:53 Set channel filter=0.000000e+000 result=40 07:59:53 Config A/D Result=40 07:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:53 Get A/D filter: -9.255963e+061 result=40 07:59:53 Get A/D value=-858993460 result=40 07:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:53 Aux= 07:59:53 Message to Camera, serial 267804 queued 08:00:30 Received message from Master: op=PointingHead serial=267817 08:00:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:00:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:00:30 Point started: ret=0 08:00:30 point_skyscan result=0 08:00:31 Check angles 08:00:31 SkyScan query 08:00:31 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.39<-13426 Statuses=0009 0009 08:00:31 Msec=0 True Az=152.73 Ze=-21.39 Az status=0009 Ze status=0009 08:00:32 Check angles 08:00:32 SkyScan query 08:00:32 SkyScan query done: ret=0 az=134.88<-8992 ze=-0.03<-12002 Statuses=0009 0009 08:00:32 Msec=750 True Az=134.88 Ze=-0.03 Az status=0009 Ze status=0009 08:00:32 Check angles 08:00:32 SkyScan query 08:00:33 SkyScan query done: ret=0 az=117.42<-7828 ze=21<-10600 Statuses=0009 0009 08:00:33 Msec=1500 True Az=117.42 Ze=21 Az status=0009 Ze status=0009 08:00:33 Check angles 08:00:33 SkyScan query 08:00:34 SkyScan query done: ret=0 az=99.975<-6665 ze=41.91<-9206 Statuses=0009 0009 08:00:34 Msec=2250 True Az=99.975 Ze=41.91 Az status=0009 Ze status=0009 08:00:34 Check angles 08:00:34 SkyScan query 08:00:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 08:00:34 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 08:00:35 Check angles 08:00:35 SkyScan query 08:00:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:00:35 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:00:35 Message to Master queued w/err=0: serial=267817 error=0 08:00:40 Received message from Master: op=Filter serial=267818 08:00:40 Color wheel filter change from 0 to 0 08:00:40 FLIGetFilterPos err=0 currentPosition=0 08:00:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:40 Filter is already there-color wheel unchanged 08:00:40 Received message from Master: op=Shutter serial=267819 08:00:40 Shutter LASER close 08:00:40 Received message from Camera: op=State serial=267821 08:00:40 GetSingleValue result=40 Value=cccccccc 08:00:40 SkyScan query 08:00:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:00:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:41 Parameters OK 08:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:41 Set A/D data flow result=40 08:00:41 Set A/D channel type result=40 08:00:41 Set A/D encoding result=40 08:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:41 Set channel filter=0.000000e+000 result=40 08:00:41 Config A/D Result=40 08:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:41 Get A/D filter: -9.255963e+061 result=40 08:00:41 Get A/D value=-858993460 result=40 08:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:41 Parameters OK 08:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:41 Set A/D data flow result=40 08:00:41 Set A/D channel type result=40 08:00:41 Set A/D encoding result=40 08:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:41 Set channel filter=0.000000e+000 result=40 08:00:41 Config A/D Result=40 08:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:41 Get A/D filter: -9.255963e+061 result=40 08:00:41 Get A/D value=-858993460 result=40 08:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:41 Aux= 08:00:41 Message to Camera, serial 267821 queued 08:01:18 Received message from Master: op=PointingHead serial=267834 08:01:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:01:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:01:18 Point started: ret=0 08:01:18 point_skyscan result=0 08:01:19 Check angles 08:01:19 SkyScan query 08:01:20 SkyScan query done: ret=0 az=85.995<-5733 ze=21.57<-10562 Statuses=0008 0009 08:01:20 Msec=0 True Az=85.995 Ze=21.57 Az status=0008 Ze status=0009 08:01:20 Check angles 08:01:20 SkyScan query 08:01:20 SkyScan query done: ret=0 az=85.995<-5733 ze=0.69<-11954 Statuses=0008 0009 08:01:20 Msec=750 True Az=85.995 Ze=0.69 Az status=0008 Ze status=0009 08:01:21 Check angles 08:01:21 SkyScan query 08:01:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.31<-13354 Statuses=0008 0009 08:01:21 Msec=1500 True Az=85.995 Ze=-20.31 Az status=0008 Ze status=0009 08:01:21 Check angles 08:01:21 SkyScan query 08:01:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.19<-14746 Statuses=0008 0009 08:01:22 Msec=2250 True Az=85.995 Ze=-41.19 Az status=0008 Ze status=0009 08:01:22 Check angles 08:01:22 SkyScan query 08:01:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:01:23 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:01:23 Message to Master queued w/err=0: serial=267834 error=0 08:01:28 Received message from Master: op=Filter serial=267835 08:01:28 Color wheel filter change from 0 to 0 08:01:28 FLIGetFilterPos err=0 currentPosition=0 08:01:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:28 Filter is already there-color wheel unchanged 08:01:28 Received message from Master: op=Shutter serial=267836 08:01:28 Shutter LASER close 08:01:28 Received message from Camera: op=State serial=267838 08:01:28 GetSingleValue result=40 Value=cccccccc 08:01:28 SkyScan query 08:01:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:01:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:28 Parameters OK 08:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:28 Set A/D data flow result=40 08:01:28 Set A/D channel type result=40 08:01:28 Set A/D encoding result=40 08:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:28 Set channel filter=0.000000e+000 result=40 08:01:28 Config A/D Result=40 08:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:28 Get A/D filter: -9.255963e+061 result=40 08:01:28 Get A/D value=-858993460 result=40 08:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:28 Parameters OK 08:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:28 Set A/D data flow result=40 08:01:28 Set A/D channel type result=40 08:01:28 Set A/D encoding result=40 08:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:28 Set channel filter=0.000000e+000 result=40 08:01:28 Config A/D Result=40 08:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:28 Get A/D filter: -9.255963e+061 result=40 08:01:28 Get A/D value=-858993460 result=40 08:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:28 Aux= 08:01:28 Message to Camera, serial 267838 queued 08:02:05 Received message from Master: op=PointingHead serial=267851 08:02:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:02:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:02:06 Point started: ret=0 08:02:06 point_skyscan result=0 08:02:06 Check angles 08:02:06 SkyScan query 08:02:07 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.54<-17436 Statuses=0009 0009 08:02:07 Msec=0 True Az=109.185 Ze=-81.54 Az status=0009 Ze status=0009 08:02:07 Check angles 08:02:07 SkyScan query 08:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.45<-18830 Statuses=0008 0009 08:02:08 Msec=750 True Az=112.995 Ze=-102.45 Az status=0008 Ze status=0009 08:02:08 Check angles 08:02:08 SkyScan query 08:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 08:02:08 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 08:02:09 Check angles 08:02:09 SkyScan query 08:02:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 08:02:09 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 08:02:09 Check angles 08:02:09 SkyScan query 08:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 08:02:10 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 08:02:10 Check angles 08:02:10 SkyScan query 08:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:02:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:02:11 Message to Master queued w/err=0: serial=267851 error=0 08:02:16 Received message from Master: op=Filter serial=267852 08:02:16 Color wheel filter change from 0 to 0 08:02:16 FLIGetFilterPos err=0 currentPosition=0 08:02:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:16 Filter is already there-color wheel unchanged 08:02:16 Received message from Master: op=Shutter serial=267853 08:02:16 Shutter LASER open 08:02:16 Received message from Camera: op=State serial=267855 08:02:16 GetSingleValue result=40 Value=cccccccc 08:02:16 SkyScan query 08:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:02:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:17 Parameters OK 08:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:17 Set A/D data flow result=40 08:02:17 Set A/D channel type result=40 08:02:17 Set A/D encoding result=40 08:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:17 Set channel filter=0.000000e+000 result=40 08:02:17 Config A/D Result=40 08:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:17 Get A/D filter: -9.255963e+061 result=40 08:02:17 Get A/D value=-858993460 result=40 08:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:17 Parameters OK 08:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:17 Set A/D data flow result=40 08:02:17 Set A/D channel type result=40 08:02:17 Set A/D encoding result=40 08:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:17 Set channel filter=0.000000e+000 result=40 08:02:17 Config A/D Result=40 08:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:17 Get A/D filter: -9.255963e+061 result=40 08:02:17 Get A/D value=-858993460 result=40 08:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:17 Aux= 08:02:17 Message to Camera, serial 267855 queued 08:02:25 Received message from Master: op=Shutter serial=267865 08:02:25 Shutter LASER close 08:02:25 Received message from Master: op=PointingHead serial=267869 08:02:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:02:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:02:26 Point started: ret=0 08:02:26 point_skyscan result=0 08:02:27 Check angles 08:02:27 SkyScan query 08:02:27 SkyScan query done: ret=0 az=89.61<-5974 ze=156.87<-1542 Statuses=0009 0009 08:02:27 Msec=0 True Az=89.61 Ze=156.87 Az status=0009 Ze status=0009 08:02:27 Check angles 08:02:27 SkyScan query 08:02:28 SkyScan query done: ret=0 az=71.775<-4785 ze=135.465<-2969 Statuses=0009 0009 08:02:28 Msec=750 True Az=71.775 Ze=135.465 Az status=0009 Ze status=0009 08:02:28 Check angles 08:02:28 SkyScan query 08:02:29 SkyScan query done: ret=0 az=54.375<-3625 ze=114.465<-4369 Statuses=0009 0009 08:02:29 Msec=1500 True Az=54.375 Ze=114.465 Az status=0009 Ze status=0009 08:02:29 Check angles 08:02:29 SkyScan query 08:02:29 SkyScan query done: ret=0 az=40.965<-2731 ze=93.525<-5765 Statuses=0009 0009 08:02:29 Msec=2250 True Az=40.965 Ze=93.525 Az status=0009 Ze status=0009 08:02:30 Check angles 08:02:30 SkyScan query 08:02:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.57<-7162 Statuses=0008 0009 08:02:30 Msec=3000 True Az=40.995 Ze=72.57 Az status=0008 Ze status=0009 08:02:30 Check angles 08:02:30 SkyScan query 08:02:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 08:02:31 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 08:02:31 Check angles 08:02:31 SkyScan query 08:02:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:02:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:02:32 Message to Master queued w/err=0: serial=267869 error=0 08:02:37 Received message from Master: op=Filter serial=267870 08:02:37 Color wheel filter change from 0 to 0 08:02:37 FLIGetFilterPos err=0 currentPosition=0 08:02:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:37 Filter is already there-color wheel unchanged 08:02:37 Received message from Master: op=Shutter serial=267871 08:02:37 Shutter LASER close 08:02:37 Received message from Camera: op=State serial=267873 08:02:37 GetSingleValue result=40 Value=cccccccc 08:02:37 SkyScan query 08:02:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:02:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:38 Parameters OK 08:02:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:38 Set A/D data flow result=40 08:02:38 Set A/D channel type result=40 08:02:38 Set A/D encoding result=40 08:02:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:38 Set channel filter=0.000000e+000 result=40 08:02:38 Config A/D Result=40 08:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:38 Get A/D filter: -9.255963e+061 result=40 08:02:38 Get A/D value=-858993460 result=40 08:02:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:38 Parameters OK 08:02:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:38 Set A/D data flow result=40 08:02:38 Set A/D channel type result=40 08:02:38 Set A/D encoding result=40 08:02:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:38 Set channel filter=0.000000e+000 result=40 08:02:38 Config A/D Result=40 08:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:38 Get A/D filter: -9.255963e+061 result=40 08:02:38 Get A/D value=-858993460 result=40 08:02:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:38 Aux= 08:02:38 Message to Camera, serial 267873 queued 08:03:15 Received message from Master: op=PointingHead serial=267886 08:03:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:03:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:03:15 Point started: ret=0 08:03:15 point_skyscan result=0 08:03:16 Check angles 08:03:16 SkyScan query 08:03:16 SkyScan query done: ret=0 az=64.185<-4279 ze=81.675<-6555 Statuses=0009 0009 08:03:16 Msec=0 True Az=64.185 Ze=81.675 Az status=0009 Ze status=0009 08:03:17 Check angles 08:03:17 SkyScan query 08:03:17 SkyScan query done: ret=0 az=82.08<-5472 ze=103.02<-5132 Statuses=0009 0009 08:03:17 Msec=750 True Az=82.08 Ze=103.02 Az status=0009 Ze status=0009 08:03:17 Check angles 08:03:17 SkyScan query 08:03:18 SkyScan query done: ret=0 az=99.525<-6635 ze=124.005<-3733 Statuses=0009 0009 08:03:18 Msec=1500 True Az=99.525 Ze=124.005 Az status=0009 Ze status=0009 08:03:18 Check angles 08:03:18 SkyScan query 08:03:19 SkyScan query done: ret=0 az=117.015<-7801 ze=144.915<-2339 Statuses=0009 0009 08:03:19 Msec=2250 True Az=117.015 Ze=144.915 Az status=0009 Ze status=0009 08:03:19 Check angles 08:03:19 SkyScan query 08:03:20 SkyScan query done: ret=0 az=131.01<-8734 ze=165.9<-940 Statuses=0009 0009 08:03:20 Msec=3000 True Az=131.01 Ze=165.9 Az status=0009 Ze status=0009 08:03:20 Check angles 08:03:20 SkyScan query 08:03:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.115<-23541 Statuses=0008 0009 08:03:20 Msec=3750 True Az=130.995 Ze=-173.115 Az status=0008 Ze status=0009 08:03:20 Check angles 08:03:20 SkyScan query 08:03:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.205<-22147 Statuses=0008 0009 08:03:21 Msec=4500 True Az=130.995 Ze=-152.205 Az status=0008 Ze status=0009 08:03:21 Check angles 08:03:21 SkyScan query 08:03:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 08:03:22 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 08:03:22 Message to Master queued w/err=0: serial=267886 error=0 08:03:27 Received message from Master: op=Filter serial=267887 08:03:27 Color wheel filter change from 0 to 0 08:03:27 FLIGetFilterPos err=0 currentPosition=0 08:03:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:27 Filter is already there-color wheel unchanged 08:03:27 Received message from Master: op=Shutter serial=267888 08:03:27 Shutter LASER close 08:03:27 Received message from Camera: op=State serial=267890 08:03:27 GetSingleValue result=40 Value=cccccccc 08:03:27 SkyScan query 08:03:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:03:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:28 Parameters OK 08:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:28 Set A/D data flow result=40 08:03:28 Set A/D channel type result=40 08:03:28 Set A/D encoding result=40 08:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:28 Set channel filter=0.000000e+000 result=40 08:03:28 Config A/D Result=40 08:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:28 Get A/D filter: -9.255963e+061 result=40 08:03:28 Get A/D value=-858993460 result=40 08:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:28 Parameters OK 08:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:28 Set A/D data flow result=40 08:03:28 Set A/D channel type result=40 08:03:28 Set A/D encoding result=40 08:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:28 Set channel filter=0.000000e+000 result=40 08:03:28 Config A/D Result=40 08:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:28 Get A/D filter: -9.255963e+061 result=40 08:03:28 Get A/D value=-858993460 result=40 08:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:28 Aux= 08:03:28 Message to Camera, serial 267890 queued 08:04:04 Received message from Master: op=PointingHead serial=267903 08:04:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:04:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:04:05 Point started: ret=0 08:04:05 point_skyscan result=0 08:04:05 Check angles 08:04:05 SkyScan query 08:04:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 08:04:06 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 08:04:06 Check angles 08:04:06 SkyScan query 08:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:04:07 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:04:07 Message to Master queued w/err=0: serial=267903 error=0 08:04:12 Received message from Master: op=Filter serial=267904 08:04:12 Color wheel filter change from 0 to 0 08:04:12 FLIGetFilterPos err=0 currentPosition=0 08:04:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:12 Filter is already there-color wheel unchanged 08:04:12 Received message from Master: op=Shutter serial=267905 08:04:12 Shutter LASER open 08:04:12 Received message from Camera: op=State serial=267907 08:04:12 GetSingleValue result=40 Value=cccccccc 08:04:12 SkyScan query 08:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:04:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:13 Parameters OK 08:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:13 Set A/D data flow result=40 08:04:13 Set A/D channel type result=40 08:04:13 Set A/D encoding result=40 08:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:13 Set channel filter=0.000000e+000 result=40 08:04:13 Config A/D Result=40 08:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:13 Get A/D filter: -9.255963e+061 result=40 08:04:13 Get A/D value=-858993460 result=40 08:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:13 Parameters OK 08:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:13 Set A/D data flow result=40 08:04:13 Set A/D channel type result=40 08:04:13 Set A/D encoding result=40 08:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:13 Set channel filter=0.000000e+000 result=40 08:04:13 Config A/D Result=40 08:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:13 Get A/D filter: -9.255963e+061 result=40 08:04:13 Get A/D value=-858993460 result=40 08:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:13 Aux= 08:04:13 Message to Camera, serial 267907 queued 08:04:21 Received message from Master: op=Shutter serial=267917 08:04:21 Shutter LASER close 08:04:22 Received message from Master: op=PointingHead serial=267921 08:04:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:04:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:04:22 Point started: ret=0 08:04:22 point_skyscan result=0 08:04:23 Check angles 08:04:23 SkyScan query 08:04:23 SkyScan query done: ret=0 az=136.425<-9095 ze=-142.785<-21519 Statuses=0009 0009 08:04:23 Msec=0 True Az=136.425 Ze=-142.785 Az status=0009 Ze status=0009 08:04:24 Check angles 08:04:24 SkyScan query 08:04:24 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.785<-20119 Statuses=0009 0009 08:04:24 Msec=750 True Az=153.9 Ze=-121.785 Az status=0009 Ze status=0009 08:04:24 Check angles 08:04:24 SkyScan query 08:04:25 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.8<-18720 Statuses=0009 0009 08:04:25 Msec=1500 True Az=171.495 Ze=-100.8 Az status=0009 Ze status=0009 08:04:25 Check angles 08:04:25 SkyScan query 08:04:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.89<-17326 Statuses=0008 0009 08:04:26 Msec=2250 True Az=176.01 Ze=-79.89 Az status=0008 Ze status=0009 08:04:26 Check angles 08:04:26 SkyScan query 08:04:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.905<-15927 Statuses=0008 0009 08:04:26 Msec=3000 True Az=176.01 Ze=-58.905 Az status=0008 Ze status=0009 08:04:27 Check angles 08:04:27 SkyScan query 08:04:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:04:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:04:27 Message to Master queued w/err=0: serial=267921 error=0 08:04:32 Received message from Master: op=Filter serial=267922 08:04:32 Color wheel filter change from 0 to 0 08:04:32 FLIGetFilterPos err=0 currentPosition=0 08:04:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:32 Filter is already there-color wheel unchanged 08:04:32 Received message from Master: op=Shutter serial=267923 08:04:32 Shutter LASER close 08:04:33 Received message from Camera: op=State serial=267925 08:04:33 GetSingleValue result=40 Value=cccccccc 08:04:33 SkyScan query 08:04:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:04:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:33 Parameters OK 08:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:33 Set A/D data flow result=40 08:04:33 Set A/D channel type result=40 08:04:33 Set A/D encoding result=40 08:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:33 Set channel filter=0.000000e+000 result=40 08:04:33 Config A/D Result=40 08:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:33 Get A/D filter: -9.255963e+061 result=40 08:04:33 Get A/D value=-858993460 result=40 08:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:33 Parameters OK 08:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:33 Set A/D data flow result=40 08:04:33 Set A/D channel type result=40 08:04:33 Set A/D encoding result=40 08:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:33 Set channel filter=0.000000e+000 result=40 08:04:33 Config A/D Result=40 08:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:33 Get A/D filter: -9.255963e+061 result=40 08:04:33 Get A/D value=-858993460 result=40 08:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:33 Aux= 08:04:33 Message to Camera, serial 267925 queued 08:05:10 Received message from Master: op=PointingHead serial=267938 08:05:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:05:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:05:10 Point started: ret=0 08:05:10 point_skyscan result=0 08:05:11 Check angles 08:05:11 SkyScan query 08:05:12 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.915<-13461 Statuses=0009 0009 08:05:12 Msec=0 True Az=153.12 Ze=-21.915 Az status=0009 Ze status=0009 08:05:12 Check angles 08:05:12 SkyScan query 08:05:12 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.87<-12058 Statuses=0009 0009 08:05:12 Msec=750 True Az=135.615 Ze=-0.87 Az status=0009 Ze status=0009 08:05:13 Check angles 08:05:13 SkyScan query 08:05:13 SkyScan query done: ret=0 az=118.125<-7875 ze=20.01<-10666 Statuses=0009 0009 08:05:13 Msec=1500 True Az=118.125 Ze=20.01 Az status=0009 Ze status=0009 08:05:13 Check angles 08:05:13 SkyScan query 08:05:14 SkyScan query done: ret=0 az=100.725<-6715 ze=41.055<-9263 Statuses=0009 0009 08:05:14 Msec=2250 True Az=100.725 Ze=41.055 Az status=0009 Ze status=0009 08:05:14 Check angles 08:05:14 SkyScan query 08:05:15 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 08:05:15 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 08:05:15 Check angles 08:05:15 SkyScan query 08:05:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:05:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:05:15 Message to Master queued w/err=0: serial=267938 error=0 [UTC 2018-12-19 08:05:20] 08:05:20 Received message from Master: op=Filter serial=267939 08:05:20 Color wheel filter change from 0 to 0 08:05:20 FLIGetFilterPos err=0 currentPosition=0 08:05:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:20 Filter is already there-color wheel unchanged 08:05:21 Received message from Master: op=Shutter serial=267940 08:05:21 Shutter LASER close 08:05:21 Received message from Camera: op=State serial=267942 08:05:21 GetSingleValue result=40 Value=cccccccc 08:05:21 SkyScan query 08:05:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:05:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:21 Parameters OK 08:05:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:21 Set A/D data flow result=40 08:05:21 Set A/D channel type result=40 08:05:21 Set A/D encoding result=40 08:05:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:21 Set channel filter=0.000000e+000 result=40 08:05:21 Config A/D Result=40 08:05:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:21 Get A/D filter: -9.255963e+061 result=40 08:05:21 Get A/D value=-858993460 result=40 08:05:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:21 Parameters OK 08:05:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:21 Set A/D data flow result=40 08:05:21 Set A/D channel type result=40 08:05:21 Set A/D encoding result=40 08:05:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:21 Set channel filter=0.000000e+000 result=40 08:05:21 Config A/D Result=40 08:05:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:21 Get A/D filter: -9.255963e+061 result=40 08:05:21 Get A/D value=-858993460 result=40 08:05:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:21 Aux= 08:05:21 Message to Camera, serial 267942 queued 08:05:58 Received message from Master: op=PointingHead serial=267955 08:05:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:05:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:05:59 Point started: ret=0 08:05:59 point_skyscan result=0 08:05:59 Check angles 08:05:59 SkyScan query 08:06:00 SkyScan query done: ret=0 az=85.995<-5733 ze=21.225<-10585 Statuses=0008 0009 08:06:00 Msec=0 True Az=85.995 Ze=21.225 Az status=0008 Ze status=0009 08:06:00 Check angles 08:06:00 SkyScan query 08:06:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.18<-12012 Statuses=0008 0009 08:06:01 Msec=750 True Az=85.995 Ze=-0.18 Az status=0008 Ze status=0009 08:06:01 Check angles 08:06:01 SkyScan query 08:06:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.105<-13407 Statuses=0008 0009 08:06:01 Msec=1500 True Az=85.995 Ze=-21.105 Az status=0008 Ze status=0009 08:06:02 Check angles 08:06:02 SkyScan query 08:06:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.09<-14806 Statuses=0008 0009 08:06:02 Msec=2250 True Az=85.995 Ze=-42.09 Az status=0008 Ze status=0009 08:06:02 Check angles 08:06:02 SkyScan query 08:06:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:06:03 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:06:03 Message to Master queued w/err=0: serial=267955 error=0 08:06:08 Received message from Master: op=Filter serial=267956 08:06:08 Color wheel filter change from 0 to 0 08:06:08 FLIGetFilterPos err=0 currentPosition=0 08:06:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:08 Filter is already there-color wheel unchanged 08:06:08 Received message from Master: op=Shutter serial=267957 08:06:08 Shutter LASER close 08:06:08 Received message from Camera: op=State serial=267959 08:06:08 GetSingleValue result=40 Value=cccccccc 08:06:08 SkyScan query 08:06:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:06:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:09 Parameters OK 08:06:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:09 Set A/D data flow result=40 08:06:09 Set A/D channel type result=40 08:06:09 Set A/D encoding result=40 08:06:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:09 Set channel filter=0.000000e+000 result=40 08:06:09 Config A/D Result=40 08:06:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:09 Get A/D filter: -9.255963e+061 result=40 08:06:09 Get A/D value=-858993460 result=40 08:06:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:09 Parameters OK 08:06:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:09 Set A/D data flow result=40 08:06:09 Set A/D channel type result=40 08:06:09 Set A/D encoding result=40 08:06:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:09 Set channel filter=0.000000e+000 result=40 08:06:09 Config A/D Result=40 08:06:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:09 Get A/D filter: -9.255963e+061 result=40 08:06:09 Get A/D value=-858993460 result=40 08:06:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:09 Aux= 08:06:09 Message to Camera, serial 267959 queued 08:06:46 Received message from Master: op=PointingHead serial=267972 08:06:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:06:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:06:46 Point started: ret=0 08:06:46 point_skyscan result=0 08:06:47 Check angles 08:06:47 SkyScan query 08:06:47 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.435<-17429 Statuses=0009 0009 08:06:47 Msec=0 True Az=109.2 Ze=-81.435 Az status=0009 Ze status=0009 08:06:47 Check angles 08:06:47 SkyScan query 08:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 08:06:48 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 08:06:48 Check angles 08:06:48 SkyScan query 08:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.345<-20223 Statuses=0008 0009 08:06:49 Msec=1500 True Az=112.995 Ze=-123.345 Az status=0008 Ze status=0009 08:06:49 Check angles 08:06:49 SkyScan query 08:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.255<-21617 Statuses=0008 0009 08:06:50 Msec=2250 True Az=112.995 Ze=-144.255 Az status=0008 Ze status=0009 08:06:50 Check angles 08:06:50 SkyScan query 08:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.24<-23016 Statuses=0008 0009 08:06:50 Msec=3000 True Az=112.995 Ze=-165.24 Az status=0008 Ze status=0009 08:06:50 Check angles 08:06:50 SkyScan query 08:06:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:06:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:06:51 Message to Master queued w/err=0: serial=267972 error=0 08:06:56 Received message from Master: op=Filter serial=267973 08:06:56 Color wheel filter change from 0 to 0 08:06:56 FLIGetFilterPos err=0 currentPosition=0 08:06:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:56 Filter is already there-color wheel unchanged 08:06:56 Received message from Master: op=Shutter serial=267974 08:06:56 Shutter LASER open 08:06:56 Received message from Camera: op=State serial=267976 08:06:56 GetSingleValue result=40 Value=cccccccc 08:06:56 SkyScan query 08:06:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:06:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:57 Parameters OK 08:06:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:57 Set A/D data flow result=40 08:06:57 Set A/D channel type result=40 08:06:57 Set A/D encoding result=40 08:06:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:57 Set channel filter=0.000000e+000 result=40 08:06:57 Config A/D Result=40 08:06:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:57 Get A/D filter: -9.255963e+061 result=40 08:06:57 Get A/D value=-858993460 result=40 08:06:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:57 Parameters OK 08:06:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:57 Set A/D data flow result=40 08:06:57 Set A/D channel type result=40 08:06:57 Set A/D encoding result=40 08:06:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:57 Set channel filter=0.000000e+000 result=40 08:06:57 Config A/D Result=40 08:06:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:57 Get A/D filter: -9.255963e+061 result=40 08:06:57 Get A/D value=-858993460 result=40 08:06:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:57 Aux= 08:06:57 Message to Camera, serial 267976 queued 08:07:05 Received message from Master: op=Shutter serial=267986 08:07:05 Shutter LASER close 08:07:06 Received message from Master: op=PointingHead serial=267990 08:07:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:07:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:07:06 Point started: ret=0 08:07:06 point_skyscan result=0 08:07:07 Check angles 08:07:07 SkyScan query 08:07:08 SkyScan query done: ret=0 az=89.865<-5991 ze=157.245<-1517 Statuses=0009 0009 08:07:08 Msec=0 True Az=89.865 Ze=157.245 Az status=0009 Ze status=0009 08:07:08 Check angles 08:07:08 SkyScan query 08:07:08 SkyScan query done: ret=0 az=72.075<-4805 ze=135.915<-2939 Statuses=0009 0009 08:07:08 Msec=750 True Az=72.075 Ze=135.915 Az status=0009 Ze status=0009 08:07:09 Check angles 08:07:09 SkyScan query 08:07:09 SkyScan query done: ret=0 az=54.555<-3637 ze=114.885<-4341 Statuses=0009 0009 08:07:09 Msec=1500 True Az=54.555 Ze=114.885 Az status=0009 Ze status=0009 08:07:09 Check angles 08:07:09 SkyScan query 08:07:10 SkyScan query done: ret=0 az=40.98<-2732 ze=93.975<-5735 Statuses=0009 0009 08:07:10 Msec=2250 True Az=40.98 Ze=93.975 Az status=0009 Ze status=0009 08:07:10 Check angles 08:07:10 SkyScan query 08:07:11 SkyScan query done: ret=0 az=40.995<-2733 ze=72.96<-7136 Statuses=0008 0009 08:07:11 Msec=3000 True Az=40.995 Ze=72.96 Az status=0008 Ze status=0009 08:07:11 Check angles 08:07:11 SkyScan query 08:07:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 08:07:11 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 08:07:12 Check angles 08:07:12 SkyScan query 08:07:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:07:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:07:12 Message to Master queued w/err=0: serial=267990 error=0 08:07:17 Received message from Master: op=Filter serial=267991 08:07:17 Color wheel filter change from 0 to 0 08:07:17 FLIGetFilterPos err=0 currentPosition=0 08:07:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:17 Filter is already there-color wheel unchanged 08:07:17 Received message from Master: op=Shutter serial=267992 08:07:17 Shutter LASER close 08:07:17 Received message from Camera: op=State serial=267994 08:07:17 GetSingleValue result=40 Value=cccccccc 08:07:17 SkyScan query 08:07:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:07:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:18 Parameters OK 08:07:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:18 Set A/D data flow result=40 08:07:18 Set A/D channel type result=40 08:07:18 Set A/D encoding result=40 08:07:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:18 Set channel filter=0.000000e+000 result=40 08:07:18 Config A/D Result=40 08:07:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:18 Get A/D filter: -9.255963e+061 result=40 08:07:18 Get A/D value=-858993460 result=40 08:07:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:18 Parameters OK 08:07:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:18 Set A/D data flow result=40 08:07:18 Set A/D channel type result=40 08:07:18 Set A/D encoding result=40 08:07:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:18 Set channel filter=0.000000e+000 result=40 08:07:18 Config A/D Result=40 08:07:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:18 Get A/D filter: -9.255963e+061 result=40 08:07:18 Get A/D value=-858993460 result=40 08:07:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:18 Aux= 08:07:18 Message to Camera, serial 267994 queued 08:07:55 Received message from Master: op=PointingHead serial=268007 08:07:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:07:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:07:55 Point started: ret=0 08:07:55 point_skyscan result=0 08:07:56 Check angles 08:07:56 SkyScan query 08:07:57 SkyScan query done: ret=0 az=64.2<-4280 ze=81.645<-6557 Statuses=0009 0009 08:07:57 Msec=0 True Az=64.2 Ze=81.645 Az status=0009 Ze status=0009 08:07:57 Check angles 08:07:57 SkyScan query 08:07:58 SkyScan query done: ret=0 az=81.66<-5444 ze=102.57<-5162 Statuses=0009 0009 08:07:58 Msec=750 True Az=81.66 Ze=102.57 Az status=0009 Ze status=0009 08:07:58 Check angles 08:07:58 SkyScan query 08:07:58 SkyScan query done: ret=0 az=99.09<-6606 ze=123.51<-3766 Statuses=0009 0009 08:07:58 Msec=1500 True Az=99.09 Ze=123.51 Az status=0009 Ze status=0009 08:07:58 Check angles 08:07:58 SkyScan query 08:07:59 SkyScan query done: ret=0 az=116.595<-7773 ze=144.45<-2370 Statuses=0009 0009 08:07:59 Msec=2250 True Az=116.595 Ze=144.45 Az status=0009 Ze status=0009 08:07:59 Check angles 08:07:59 SkyScan query 08:08:00 SkyScan query done: ret=0 az=130.995<-8733 ze=165.405<-973 Statuses=0009 0009 08:08:00 Msec=3000 True Az=130.995 Ze=165.405 Az status=0009 Ze status=0009 08:08:00 Check angles 08:08:00 SkyScan query 08:08:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-173.64<-23576 Statuses=0008 0009 08:08:01 Msec=3750 True Az=130.995 Ze=-173.64 Az status=0008 Ze status=0009 08:08:01 Check angles 08:08:01 SkyScan query 08:08:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.67<-22178 Statuses=0008 0009 08:08:01 Msec=4500 True Az=130.995 Ze=-152.67 Az status=0008 Ze status=0009 08:08:01 Check angles 08:08:01 SkyScan query 08:08:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 08:08:02 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 08:08:02 Message to Master queued w/err=0: serial=268007 error=0 08:08:07 Received message from Master: op=Filter serial=268008 08:08:07 Color wheel filter change from 0 to 0 08:08:07 FLIGetFilterPos err=0 currentPosition=0 08:08:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:07 Filter is already there-color wheel unchanged 08:08:07 Received message from Master: op=Shutter serial=268009 08:08:07 Shutter LASER close 08:08:07 Received message from Camera: op=State serial=268011 08:08:07 GetSingleValue result=40 Value=cccccccc 08:08:07 SkyScan query 08:08:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:08:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:08 Parameters OK 08:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:08 Set A/D data flow result=40 08:08:08 Set A/D channel type result=40 08:08:08 Set A/D encoding result=40 08:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:08 Set channel filter=0.000000e+000 result=40 08:08:08 Config A/D Result=40 08:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:08 Get A/D filter: -9.255963e+061 result=40 08:08:08 Get A/D value=-858993460 result=40 08:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:08 Parameters OK 08:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:08 Set A/D data flow result=40 08:08:08 Set A/D channel type result=40 08:08:08 Set A/D encoding result=40 08:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:08 Set channel filter=0.000000e+000 result=40 08:08:08 Config A/D Result=40 08:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:08 Get A/D filter: -9.255963e+061 result=40 08:08:08 Get A/D value=-858993460 result=40 08:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:08 Aux= 08:08:08 Message to Camera, serial 268011 queued 08:08:45 Received message from Master: op=PointingHead serial=268024 08:08:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:08:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:08:45 Point started: ret=0 08:08:45 point_skyscan result=0 08:08:46 Check angles 08:08:46 SkyScan query 08:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.42<-23428 Statuses=0009 0009 08:08:46 Msec=0 True Az=112.995 Ze=-171.42 Az status=0009 Ze status=0009 08:08:47 Check angles 08:08:47 SkyScan query 08:08:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:08:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:08:47 Message to Master queued w/err=0: serial=268024 error=0 08:08:52 Received message from Master: op=Filter serial=268025 08:08:52 Color wheel filter change from 0 to 0 08:08:52 FLIGetFilterPos err=0 currentPosition=0 08:08:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:52 Filter is already there-color wheel unchanged 08:08:52 Received message from Master: op=Shutter serial=268026 08:08:52 Shutter LASER open 08:08:52 Received message from Camera: op=State serial=268028 08:08:52 GetSingleValue result=40 Value=cccccccc 08:08:52 SkyScan query 08:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:08:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:53 Parameters OK 08:08:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:53 Set A/D data flow result=40 08:08:53 Set A/D channel type result=40 08:08:53 Set A/D encoding result=40 08:08:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:53 Set channel filter=0.000000e+000 result=40 08:08:53 Config A/D Result=40 08:08:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:53 Get A/D filter: -9.255963e+061 result=40 08:08:53 Get A/D value=-858993460 result=40 08:08:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:53 Parameters OK 08:08:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:53 Set A/D data flow result=40 08:08:53 Set A/D channel type result=40 08:08:53 Set A/D encoding result=40 08:08:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:53 Set channel filter=0.000000e+000 result=40 08:08:53 Config A/D Result=40 08:08:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:53 Get A/D filter: -9.255963e+061 result=40 08:08:53 Get A/D value=-858993460 result=40 08:08:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:53 Aux= 08:08:53 Message to Camera, serial 268028 queued 08:09:01 Received message from Master: op=Shutter serial=268038 08:09:01 Shutter LASER close 08:09:02 Received message from Master: op=PointingHead serial=268042 08:09:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:09:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:09:02 Point started: ret=0 08:09:02 point_skyscan result=0 08:09:03 Check angles 08:09:03 SkyScan query 08:09:04 SkyScan query done: ret=0 az=136.32<-9088 ze=-142.905<-21527 Statuses=0009 0009 08:09:04 Msec=0 True Az=136.32 Ze=-142.905 Az status=0009 Ze status=0009 08:09:04 Check angles 08:09:04 SkyScan query 08:09:04 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.905<-20127 Statuses=0009 0009 08:09:04 Msec=750 True Az=153.78 Ze=-121.905 Az status=0009 Ze status=0009 08:09:05 Check angles 08:09:05 SkyScan query 08:09:05 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.95<-18730 Statuses=0009 0009 08:09:05 Msec=1500 True Az=171.225 Ze=-100.95 Az status=0009 Ze status=0009 08:09:05 Check angles 08:09:05 SkyScan query 08:09:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.025<-17335 Statuses=0008 0009 08:09:06 Msec=2250 True Az=176.01 Ze=-80.025 Az status=0008 Ze status=0009 08:09:06 Check angles 08:09:06 SkyScan query 08:09:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.04<-15936 Statuses=0008 0009 08:09:07 Msec=3000 True Az=176.01 Ze=-59.04 Az status=0008 Ze status=0009 08:09:07 Check angles 08:09:07 SkyScan query 08:09:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:09:07 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:09:07 Message to Master queued w/err=0: serial=268042 error=0 08:09:12 Received message from Master: op=Filter serial=268043 08:09:12 Color wheel filter change from 0 to 0 08:09:12 FLIGetFilterPos err=0 currentPosition=0 08:09:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:12 Filter is already there-color wheel unchanged 08:09:13 Received message from Master: op=Shutter serial=268044 08:09:13 Shutter LASER close 08:09:13 Received message from Camera: op=State serial=268046 08:09:13 GetSingleValue result=40 Value=cccccccc 08:09:13 SkyScan query 08:09:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:09:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:13 Parameters OK 08:09:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:13 Set A/D data flow result=40 08:09:13 Set A/D channel type result=40 08:09:13 Set A/D encoding result=40 08:09:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:13 Set channel filter=0.000000e+000 result=40 08:09:13 Config A/D Result=40 08:09:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:13 Get A/D filter: -9.255963e+061 result=40 08:09:13 Get A/D value=-858993460 result=40 08:09:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:13 Parameters OK 08:09:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:13 Set A/D data flow result=40 08:09:13 Set A/D channel type result=40 08:09:13 Set A/D encoding result=40 08:09:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:13 Set channel filter=0.000000e+000 result=40 08:09:13 Config A/D Result=40 08:09:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:13 Get A/D filter: -9.255963e+061 result=40 08:09:13 Get A/D value=-858993460 result=40 08:09:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:13 Aux= 08:09:13 Message to Camera, serial 268046 queued 08:09:50 Received message from Master: op=PointingHead serial=268059 08:09:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:09:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:09:51 Point started: ret=0 08:09:51 point_skyscan result=0 08:09:51 Check angles 08:09:51 SkyScan query 08:09:52 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.465<-13431 Statuses=0009 0009 08:09:52 Msec=0 True Az=152.775 Ze=-21.465 Az status=0009 Ze status=0009 08:09:52 Check angles 08:09:52 SkyScan query 08:09:53 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.465<-12031 Statuses=0009 0009 08:09:53 Msec=750 True Az=135.27 Ze=-0.465 Az status=0009 Ze status=0009 08:09:53 Check angles 08:09:53 SkyScan query 08:09:53 SkyScan query done: ret=0 az=117.45<-7830 ze=20.94<-10604 Statuses=0009 0009 08:09:53 Msec=1500 True Az=117.45 Ze=20.94 Az status=0009 Ze status=0009 08:09:54 Check angles 08:09:54 SkyScan query 08:09:54 SkyScan query done: ret=0 az=100.065<-6671 ze=41.835<-9211 Statuses=0009 0009 08:09:54 Msec=2250 True Az=100.065 Ze=41.835 Az status=0009 Ze status=0009 08:09:54 Check angles 08:09:54 SkyScan query 08:09:55 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 08:09:55 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 08:09:55 Check angles 08:09:55 SkyScan query 08:09:56 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 08:09:56 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 08:09:56 Message to Master queued w/err=0: serial=268059 error=0 08:10:01 Received message from Master: op=Filter serial=268060 08:10:01 Color wheel filter change from 0 to 0 08:10:01 FLIGetFilterPos err=0 currentPosition=0 08:10:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:01 Filter is already there-color wheel unchanged 08:10:01 Received message from Master: op=Shutter serial=268061 08:10:01 Shutter LASER close 08:10:01 Received message from Camera: op=State serial=268063 08:10:01 GetSingleValue result=40 Value=cccccccc 08:10:01 SkyScan query 08:10:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:10:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:01 Parameters OK 08:10:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:01 Set A/D data flow result=40 08:10:01 Set A/D channel type result=40 08:10:01 Set A/D encoding result=40 08:10:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:01 Set channel filter=0.000000e+000 result=40 08:10:01 Config A/D Result=40 08:10:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:01 Get A/D filter: -9.255963e+061 result=40 08:10:01 Get A/D value=-858993460 result=40 08:10:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:01 Parameters OK 08:10:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:01 Set A/D data flow result=40 08:10:01 Set A/D channel type result=40 08:10:01 Set A/D encoding result=40 08:10:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:01 Set channel filter=0.000000e+000 result=40 08:10:01 Config A/D Result=40 08:10:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:01 Get A/D filter: -9.255963e+061 result=40 08:10:01 Get A/D value=-858993460 result=40 08:10:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:01 Aux= 08:10:01 Message to Camera, serial 268063 queued 08:10:38 Received message from Master: op=PointingHead serial=268076 08:10:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:10:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:10:39 Point started: ret=0 08:10:39 point_skyscan result=0 08:10:40 Check angles 08:10:40 SkyScan query 08:10:40 SkyScan query done: ret=0 az=85.995<-5733 ze=21.585<-10561 Statuses=0008 0009 08:10:40 Msec=0 True Az=85.995 Ze=21.585 Az status=0008 Ze status=0009 08:10:40 Check angles 08:10:40 SkyScan query 08:10:41 SkyScan query done: ret=0 az=86.01<-5734 ze=0.255<-11983 Statuses=0008 0009 08:10:41 Msec=750 True Az=86.01 Ze=0.255 Az status=0008 Ze status=0009 08:10:41 Check angles 08:10:41 SkyScan query 08:10:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.73<-13382 Statuses=0008 0009 08:10:42 Msec=1500 True Az=85.995 Ze=-20.73 Az status=0008 Ze status=0009 08:10:42 Check angles 08:10:42 SkyScan query 08:10:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.67<-14778 Statuses=0008 0009 08:10:42 Msec=2250 True Az=85.995 Ze=-41.67 Az status=0008 Ze status=0009 08:10:43 Check angles 08:10:43 SkyScan query 08:10:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:10:43 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:10:43 Message to Master queued w/err=0: serial=268076 error=0 08:10:48 Received message from Master: op=Filter serial=268077 08:10:48 Color wheel filter change from 0 to 0 08:10:48 FLIGetFilterPos err=0 currentPosition=0 08:10:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:48 Filter is already there-color wheel unchanged 08:10:48 Received message from Master: op=Shutter serial=268078 08:10:48 Shutter LASER close 08:10:48 Received message from Camera: op=State serial=268080 08:10:48 GetSingleValue result=40 Value=cccccccc 08:10:48 SkyScan query 08:10:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:10:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:49 Parameters OK 08:10:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:49 Set A/D data flow result=40 08:10:49 Set A/D channel type result=40 08:10:49 Set A/D encoding result=40 08:10:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:49 Set channel filter=0.000000e+000 result=40 08:10:49 Config A/D Result=40 08:10:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:49 Get A/D filter: -9.255963e+061 result=40 08:10:49 Get A/D value=-858993460 result=40 08:10:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:49 Parameters OK 08:10:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:49 Set A/D data flow result=40 08:10:49 Set A/D channel type result=40 08:10:49 Set A/D encoding result=40 08:10:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:49 Set channel filter=0.000000e+000 result=40 08:10:49 Config A/D Result=40 08:10:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:49 Get A/D filter: -9.255963e+061 result=40 08:10:49 Get A/D value=-858993460 result=40 08:10:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:49 Aux= 08:10:49 Message to Camera, serial 268080 queued 08:11:26 Received message from Master: op=PointingHead serial=268093 08:11:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:11:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:11:26 Point started: ret=0 08:11:26 point_skyscan result=0 08:11:27 Check angles 08:11:27 SkyScan query 08:11:28 SkyScan query done: ret=0 az=108.735<-7249 ze=-81.015<-17401 Statuses=0009 0009 08:11:28 Msec=0 True Az=108.735 Ze=-81.015 Az status=0009 Ze status=0009 08:11:28 Check angles 08:11:28 SkyScan query 08:11:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 08:11:28 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 08:11:28 Check angles 08:11:28 SkyScan query 08:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.94<-20196 Statuses=0008 0009 08:11:29 Msec=1500 True Az=112.995 Ze=-122.94 Az status=0008 Ze status=0009 08:11:29 Check angles 08:11:29 SkyScan query 08:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 08:11:30 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 08:11:30 Check angles 08:11:30 SkyScan query 08:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 08:11:31 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 08:11:31 Check angles 08:11:31 SkyScan query 08:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:11:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:11:31 Message to Master queued w/err=0: serial=268093 error=0 08:11:36 Received message from Master: op=Filter serial=268094 08:11:36 Color wheel filter change from 0 to 0 08:11:36 FLIGetFilterPos err=0 currentPosition=0 08:11:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:36 Filter is already there-color wheel unchanged 08:11:36 Received message from Master: op=Shutter serial=268095 08:11:36 Shutter LASER open 08:11:37 Received message from Camera: op=State serial=268097 08:11:37 GetSingleValue result=40 Value=cccccccc 08:11:37 SkyScan query 08:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:11:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:37 Parameters OK 08:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:37 Set A/D data flow result=40 08:11:37 Set A/D channel type result=40 08:11:37 Set A/D encoding result=40 08:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:37 Set channel filter=0.000000e+000 result=40 08:11:37 Config A/D Result=40 08:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:37 Get A/D filter: -9.255963e+061 result=40 08:11:37 Get A/D value=-858993460 result=40 08:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:37 Parameters OK 08:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:37 Set A/D data flow result=40 08:11:37 Set A/D channel type result=40 08:11:37 Set A/D encoding result=40 08:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:37 Set channel filter=0.000000e+000 result=40 08:11:37 Config A/D Result=40 08:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:37 Get A/D filter: -9.255963e+061 result=40 08:11:37 Get A/D value=-858993460 result=40 08:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:37 Aux= 08:11:37 Message to Camera, serial 268097 queued 08:11:46 Received message from Master: op=Shutter serial=268107 08:11:46 Shutter LASER close 08:11:46 Received message from Master: op=PointingHead serial=268111 08:11:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:11:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:11:47 Point started: ret=0 08:11:47 point_skyscan result=0 08:11:47 Check angles 08:11:47 SkyScan query 08:11:48 SkyScan query done: ret=0 az=90.015<-6001 ze=157.41<-1506 Statuses=0009 0009 08:11:48 Msec=0 True Az=90.015 Ze=157.41 Az status=0009 Ze status=0009 08:11:48 Check angles 08:11:48 SkyScan query 08:11:49 SkyScan query done: ret=0 az=72.09<-4806 ze=136.065<-2929 Statuses=0009 0009 08:11:49 Msec=750 True Az=72.09 Ze=136.065 Az status=0009 Ze status=0009 08:11:49 Check angles 08:11:49 SkyScan query 08:11:49 SkyScan query done: ret=0 az=54.735<-3649 ze=115.065<-4329 Statuses=0009 0009 08:11:49 Msec=1500 True Az=54.735 Ze=115.065 Az status=0009 Ze status=0009 08:11:50 Check angles 08:11:50 SkyScan query 08:11:50 SkyScan query done: ret=0 az=40.995<-2733 ze=94.14<-5724 Statuses=0009 0009 08:11:50 Msec=2250 True Az=40.995 Ze=94.14 Az status=0009 Ze status=0009 08:11:50 Check angles 08:11:50 SkyScan query 08:11:51 SkyScan query done: ret=0 az=40.995<-2733 ze=73.14<-7124 Statuses=0008 0009 08:11:51 Msec=3000 True Az=40.995 Ze=73.14 Az status=0008 Ze status=0009 08:11:51 Check angles 08:11:51 SkyScan query 08:11:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 08:11:52 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 08:11:52 Check angles 08:11:52 SkyScan query 08:11:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:11:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:11:52 Message to Master queued w/err=0: serial=268111 error=0 08:11:57 Received message from Master: op=Filter serial=268112 08:11:57 Color wheel filter change from 0 to 0 08:11:57 FLIGetFilterPos err=0 currentPosition=0 08:11:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:57 Filter is already there-color wheel unchanged 08:11:58 Received message from Master: op=Shutter serial=268113 08:11:58 Shutter LASER close 08:11:58 Received message from Camera: op=State serial=268115 08:11:58 GetSingleValue result=40 Value=cccccccc 08:11:58 SkyScan query 08:11:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:11:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:58 Parameters OK 08:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:58 Set A/D data flow result=40 08:11:58 Set A/D channel type result=40 08:11:58 Set A/D encoding result=40 08:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:58 Set channel filter=0.000000e+000 result=40 08:11:58 Config A/D Result=40 08:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:58 Get A/D filter: -9.255963e+061 result=40 08:11:58 Get A/D value=-858993460 result=40 08:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:58 Parameters OK 08:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:58 Set A/D data flow result=40 08:11:58 Set A/D channel type result=40 08:11:58 Set A/D encoding result=40 08:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:58 Set channel filter=0.000000e+000 result=40 08:11:58 Config A/D Result=40 08:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:58 Get A/D filter: -9.255963e+061 result=40 08:11:58 Get A/D value=-858993460 result=40 08:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:58 Aux= 08:11:58 Message to Camera, serial 268115 queued 08:12:35 Received message from Master: op=PointingHead serial=268128 08:12:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:12:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:12:35 Point started: ret=0 08:12:35 point_skyscan result=0 08:12:36 Check angles 08:12:36 SkyScan query 08:12:37 SkyScan query done: ret=0 az=64.2<-4280 ze=66.54<-7564 Statuses=0009 0008 08:12:37 Msec=0 True Az=64.2 Ze=66.54 Az status=0009 Ze status=0008 08:12:37 Check angles 08:12:37 SkyScan query 08:12:38 SkyScan query done: ret=0 az=81.6<-5440 ze=66.51<-7566 Statuses=0009 0008 08:12:38 Msec=750 True Az=81.6 Ze=66.51 Az status=0009 Ze status=0008 08:12:38 Check angles 08:12:38 SkyScan query 08:12:38 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 08:12:38 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 08:12:38 Check angles 08:12:38 SkyScan query 08:12:39 SkyScan query done: ret=0 az=116.52<-7768 ze=66.495<-7567 Statuses=0009 0008 08:12:39 Msec=2250 True Az=116.52 Ze=66.495 Az status=0009 Ze status=0008 08:12:39 Check angles 08:12:39 SkyScan query 08:12:40 SkyScan query done: ret=0 az=133.98<-8932 ze=66.495<-7567 Statuses=0009 0008 08:12:40 Msec=3000 True Az=133.98 Ze=66.495 Az status=0009 Ze status=0008 08:12:40 Check angles 08:12:40 SkyScan query 08:12:41 SkyScan query done: ret=0 az=151.44<-10096 ze=66.495<-7567 Statuses=0009 0008 08:12:41 Msec=3750 True Az=151.44 Ze=66.495 Az status=0009 Ze status=0008 08:12:41 Check angles 08:12:41 SkyScan query 08:12:41 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:12:41 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:12:41 Message to Master queued w/err=0: serial=268128 error=0 08:12:46 Received message from Master: op=Filter serial=268129 08:12:46 Color wheel filter change from 0 to 0 08:12:46 FLIGetFilterPos err=0 currentPosition=0 08:12:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:46 Filter is already there-color wheel unchanged 08:12:46 Received message from Master: op=Shutter serial=268130 08:12:47 Shutter LASER close 08:12:47 Received message from Camera: op=State serial=268132 08:12:47 GetSingleValue result=40 Value=cccccccc 08:12:47 SkyScan query 08:12:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:12:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:47 Parameters OK 08:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:47 Set A/D data flow result=40 08:12:47 Set A/D channel type result=40 08:12:47 Set A/D encoding result=40 08:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:47 Set channel filter=0.000000e+000 result=40 08:12:47 Config A/D Result=40 08:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:47 Get A/D filter: -9.255963e+061 result=40 08:12:47 Get A/D value=-858993460 result=40 08:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:47 Parameters OK 08:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:47 Set A/D data flow result=40 08:12:47 Set A/D channel type result=40 08:12:47 Set A/D encoding result=40 08:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:47 Set channel filter=0.000000e+000 result=40 08:12:47 Config A/D Result=40 08:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:47 Get A/D filter: -9.255963e+061 result=40 08:12:47 Get A/D value=-858993460 result=40 08:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:47 Aux= 08:12:47 Message to Camera, serial 268132 queued 08:13:24 Received message from Master: op=PointingHead serial=268145 08:13:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:13:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:13:24 Point started: ret=0 08:13:24 point_skyscan result=0 08:13:25 Check angles 08:13:25 SkyScan query 08:13:26 SkyScan query done: ret=0 az=134.595<-8973 ze=96.645<-5557 Statuses=0009 0009 08:13:26 Msec=0 True Az=134.595 Ze=96.645 Az status=0009 Ze status=0009 08:13:26 Check angles 08:13:26 SkyScan query 08:13:27 SkyScan query done: ret=0 az=130.995<-8733 ze=118.035<-4131 Statuses=0008 0009 08:13:27 Msec=750 True Az=130.995 Ze=118.035 Az status=0008 Ze status=0009 08:13:27 Check angles 08:13:27 SkyScan query 08:13:27 SkyScan query done: ret=0 az=130.995<-8733 ze=138.99<-2734 Statuses=0008 0009 08:13:27 Msec=1500 True Az=130.995 Ze=138.99 Az status=0008 Ze status=0009 08:13:27 Check angles 08:13:27 SkyScan query 08:13:28 SkyScan query done: ret=0 az=130.995<-8733 ze=159.93<-1338 Statuses=0008 0009 08:13:28 Msec=2250 True Az=130.995 Ze=159.93 Az status=0008 Ze status=0009 08:13:28 Check angles 08:13:28 SkyScan query 08:13:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.635<-23909 Statuses=0008 0009 08:13:29 Msec=3000 True Az=130.995 Ze=-178.635 Az status=0008 Ze status=0009 08:13:29 Check angles 08:13:29 SkyScan query 08:13:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.725<-22515 Statuses=0008 0009 08:13:30 Msec=3750 True Az=130.995 Ze=-157.725 Az status=0008 Ze status=0009 08:13:30 Check angles 08:13:30 SkyScan query 08:13:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 08:13:30 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 08:13:31 Check angles 08:13:31 SkyScan query 08:13:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:13:31 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:13:31 Message to Master queued w/err=0: serial=268145 error=0 08:13:36 Received message from Master: op=Filter serial=268146 08:13:36 Color wheel filter change from 0 to 0 08:13:36 FLIGetFilterPos err=0 currentPosition=0 08:13:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:36 Filter is already there-color wheel unchanged 08:13:36 Received message from Master: op=Shutter serial=268147 08:13:36 Shutter LASER close 08:13:36 Received message from Camera: op=State serial=268149 08:13:36 GetSingleValue result=40 Value=cccccccc 08:13:36 SkyScan query 08:13:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:13:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:37 Parameters OK 08:13:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:37 Set A/D data flow result=40 08:13:37 Set A/D channel type result=40 08:13:37 Set A/D encoding result=40 08:13:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:37 Set channel filter=0.000000e+000 result=40 08:13:37 Config A/D Result=40 08:13:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:37 Get A/D filter: -9.255963e+061 result=40 08:13:37 Get A/D value=-858993460 result=40 08:13:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:37 Parameters OK 08:13:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:37 Set A/D data flow result=40 08:13:37 Set A/D channel type result=40 08:13:37 Set A/D encoding result=40 08:13:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:37 Set channel filter=0.000000e+000 result=40 08:13:37 Config A/D Result=40 08:13:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:37 Get A/D filter: -9.255963e+061 result=40 08:13:37 Get A/D value=-858993460 result=40 08:13:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:37 Aux= 08:13:37 Message to Camera, serial 268149 queued 08:14:14 Received message from Master: op=PointingHead serial=268162 08:14:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:14:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:14:14 Point started: ret=0 08:14:14 point_skyscan result=0 08:14:15 Check angles 08:14:15 SkyScan query 08:14:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 08:14:15 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 08:14:16 Check angles 08:14:16 SkyScan query 08:14:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 08:14:16 Msec=750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 08:14:16 Message to Master queued w/err=0: serial=268162 error=0 08:14:21 Received message from Master: op=Filter serial=268163 08:14:21 Color wheel filter change from 0 to 0 08:14:21 FLIGetFilterPos err=0 currentPosition=0 08:14:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:21 Filter is already there-color wheel unchanged 08:14:21 Received message from Master: op=Shutter serial=268164 08:14:21 Shutter LASER open 08:14:21 Received message from Camera: op=State serial=268166 08:14:21 GetSingleValue result=40 Value=cccccccc 08:14:21 SkyScan query 08:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:14:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:22 Parameters OK 08:14:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:22 Set A/D data flow result=40 08:14:22 Set A/D channel type result=40 08:14:22 Set A/D encoding result=40 08:14:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:22 Set channel filter=0.000000e+000 result=40 08:14:22 Config A/D Result=40 08:14:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:22 Get A/D filter: -9.255963e+061 result=40 08:14:22 Get A/D value=-858993460 result=40 08:14:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:22 Parameters OK 08:14:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:22 Set A/D data flow result=40 08:14:22 Set A/D channel type result=40 08:14:22 Set A/D encoding result=40 08:14:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:22 Set channel filter=0.000000e+000 result=40 08:14:22 Config A/D Result=40 08:14:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:22 Get A/D filter: -9.255963e+061 result=40 08:14:22 Get A/D value=-858993460 result=40 08:14:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-173.009995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:22 Aux= 08:14:22 Message to Camera, serial 268166 queued 08:14:30 Received message from Master: op=Shutter serial=268176 08:14:30 Shutter LASER close 08:14:31 Received message from Master: op=PointingHead serial=268180 08:14:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:14:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:14:31 Point started: ret=0 08:14:31 point_skyscan result=0 08:14:32 Check angles 08:14:32 SkyScan query 08:14:33 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.46<-21564 Statuses=0009 0009 08:14:33 Msec=0 True Az=135.78 Ze=-143.46 Az status=0009 Ze status=0009 08:14:33 Check angles 08:14:33 SkyScan query 08:14:33 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.505<-20167 Statuses=0009 0009 08:14:33 Msec=750 True Az=153.3 Ze=-122.505 Az status=0009 Ze status=0009 08:14:34 Check angles 08:14:34 SkyScan query 08:14:34 SkyScan query done: ret=0 az=171.15<-11410 ze=-101.13<-18742 Statuses=0009 0009 08:14:34 Msec=1500 True Az=171.15 Ze=-101.13 Az status=0009 Ze status=0009 08:14:34 Check angles 08:14:34 SkyScan query 08:14:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.175<-17345 Statuses=0008 0009 08:14:35 Msec=2250 True Az=176.01 Ze=-80.175 Az status=0008 Ze status=0009 08:14:35 Check angles 08:14:35 SkyScan query 08:14:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.205<-15947 Statuses=0008 0009 08:14:36 Msec=3000 True Az=175.995 Ze=-59.205 Az status=0008 Ze status=0009 08:14:36 Check angles 08:14:36 SkyScan query 08:14:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:14:37 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:14:37 Message to Master queued w/err=0: serial=268180 error=0 08:14:42 Received message from Master: op=Filter serial=268181 08:14:42 Color wheel filter change from 0 to 0 08:14:42 FLIGetFilterPos err=0 currentPosition=0 08:14:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:42 Filter is already there-color wheel unchanged 08:14:42 Received message from Master: op=Shutter serial=268182 08:14:42 Shutter LASER close 08:14:42 Received message from Camera: op=State serial=268184 08:14:42 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-19 08:14:42] 08:14:42 SkyScan query 08:14:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:14:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:43 Parameters OK 08:14:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:43 Set A/D data flow result=40 08:14:43 Set A/D channel type result=40 08:14:43 Set A/D encoding result=40 08:14:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:43 Set channel filter=0.000000e+000 result=40 08:14:43 Config A/D Result=40 08:14:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:43 Get A/D filter: -9.255963e+061 result=40 08:14:43 Get A/D value=-858993460 result=40 08:14:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:43 Parameters OK 08:14:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:43 Set A/D data flow result=40 08:14:43 Set A/D channel type result=40 08:14:43 Set A/D encoding result=40 08:14:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:43 Set channel filter=0.000000e+000 result=40 08:14:43 Config A/D Result=40 08:14:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:43 Get A/D filter: -9.255963e+061 result=40 08:14:43 Get A/D value=-858993460 result=40 08:14:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:43 Aux= 08:14:43 Message to Camera, serial 268184 queued 08:15:18 Received message from Master: op=PointingHead serial=268196 08:15:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:15:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:15:19 Point started: ret=0 08:15:19 point_skyscan result=0 08:15:19 Check angles 08:15:19 SkyScan query 08:15:20 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.255<-13417 Statuses=0009 0009 08:15:20 Msec=0 True Az=152.655 Ze=-21.255 Az status=0009 Ze status=0009 08:15:20 Check angles 08:15:20 SkyScan query 08:15:21 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.3<-12020 Statuses=0009 0009 08:15:21 Msec=750 True Az=135.12 Ze=-0.3 Az status=0009 Ze status=0009 08:15:21 Check angles 08:15:21 SkyScan query 08:15:22 SkyScan query done: ret=0 az=117.165<-7811 ze=21.135<-10591 Statuses=0009 0009 08:15:22 Msec=1500 True Az=117.165 Ze=21.135 Az status=0009 Ze status=0009 08:15:22 Check angles 08:15:22 SkyScan query 08:15:22 SkyScan query done: ret=0 az=99.795<-6653 ze=42.015<-9199 Statuses=0009 0009 08:15:22 Msec=2250 True Az=99.795 Ze=42.015 Az status=0009 Ze status=0009 08:15:22 Check angles 08:15:22 SkyScan query 08:15:23 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 08:15:23 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 08:15:23 Check angles 08:15:23 SkyScan query 08:15:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:15:24 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:15:24 Message to Master queued w/err=0: serial=268196 error=0 08:15:27 Received message from Master: op=Identify serial=268197 08:15:29 Received message from Master: op=Filter serial=268200 08:15:29 Color wheel filter change from 0 to 0 08:15:29 FLIGetFilterPos err=0 currentPosition=0 08:15:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:29 Filter is already there-color wheel unchanged 08:15:29 Received message from Master: op=Shutter serial=268201 08:15:29 Shutter LASER close 08:15:29 Received message from Camera: op=State serial=268203 08:15:29 GetSingleValue result=40 Value=cccccccc 08:15:29 SkyScan query 08:15:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:15:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:30 Parameters OK 08:15:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:30 Set A/D data flow result=40 08:15:30 Set A/D channel type result=40 08:15:30 Set A/D encoding result=40 08:15:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:30 Set channel filter=0.000000e+000 result=40 08:15:30 Config A/D Result=40 08:15:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:30 Get A/D filter: -9.255963e+061 result=40 08:15:30 Get A/D value=-858993460 result=40 08:15:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:30 Parameters OK 08:15:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:30 Set A/D data flow result=40 08:15:30 Set A/D channel type result=40 08:15:30 Set A/D encoding result=40 08:15:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:30 Set channel filter=0.000000e+000 result=40 08:15:30 Config A/D Result=40 08:15:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:30 Get A/D filter: -9.255963e+061 result=40 08:15:30 Get A/D value=-858993460 result=40 08:15:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:30 Aux= 08:15:30 Message to Camera, serial 268203 queued [UTC 2018-12-19 08:15:52] 08:16:07 Received message from Master: op=PointingHead serial=268216 08:16:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:16:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:16:07 Point started: ret=0 08:16:07 point_skyscan result=0 08:16:08 Check angles 08:16:08 SkyScan query 08:16:08 SkyScan query done: ret=0 az=85.995<-5733 ze=21.705<-10553 Statuses=0008 0009 08:16:08 Msec=0 True Az=85.995 Ze=21.705 Az status=0008 Ze status=0009 08:16:08 Check angles 08:16:08 SkyScan query 08:16:09 SkyScan query done: ret=0 az=86.01<-5734 ze=0.375<-11975 Statuses=0008 0009 08:16:09 Msec=750 True Az=86.01 Ze=0.375 Az status=0008 Ze status=0009 08:16:09 Check angles 08:16:09 SkyScan query 08:16:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.625<-13375 Statuses=0008 0009 08:16:10 Msec=1500 True Az=85.995 Ze=-20.625 Az status=0008 Ze status=0009 08:16:10 Check angles 08:16:10 SkyScan query 08:16:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.52<-14768 Statuses=0008 0009 08:16:10 Msec=2250 True Az=85.995 Ze=-41.52 Az status=0008 Ze status=0009 08:16:11 Check angles 08:16:11 SkyScan query 08:16:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:16:11 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:16:11 Message to Master queued w/err=0: serial=268216 error=0 08:16:16 Received message from Master: op=Filter serial=268217 08:16:16 Color wheel filter change from 0 to 0 08:16:16 FLIGetFilterPos err=0 currentPosition=0 08:16:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:16 Filter is already there-color wheel unchanged 08:16:16 Received message from Master: op=Shutter serial=268218 08:16:16 Shutter LASER close 08:16:16 Received message from Camera: op=State serial=268220 08:16:16 GetSingleValue result=40 Value=cccccccc 08:16:16 SkyScan query 08:16:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:16:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:17 Parameters OK 08:16:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:17 Set A/D data flow result=40 08:16:17 Set A/D channel type result=40 08:16:17 Set A/D encoding result=40 08:16:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:17 Set channel filter=0.000000e+000 result=40 08:16:17 Config A/D Result=40 08:16:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:17 Get A/D filter: -9.255963e+061 result=40 08:16:17 Get A/D value=-858993460 result=40 08:16:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:17 Parameters OK 08:16:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:17 Set A/D data flow result=40 08:16:17 Set A/D channel type result=40 08:16:17 Set A/D encoding result=40 08:16:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:17 Set channel filter=0.000000e+000 result=40 08:16:17 Config A/D Result=40 08:16:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:17 Get A/D filter: -9.255963e+061 result=40 08:16:17 Get A/D value=-858993460 result=40 08:16:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:17 Aux= 08:16:17 Message to Camera, serial 268220 queued 08:16:54 Received message from Master: op=PointingHead serial=268233 08:16:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:16:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:16:54 Point started: ret=0 08:16:54 point_skyscan result=0 08:16:55 Check angles 08:16:55 SkyScan query 08:16:56 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.54<-17436 Statuses=0009 0009 08:16:56 Msec=0 True Az=109.17 Ze=-81.54 Az status=0009 Ze status=0009 08:16:56 Check angles 08:16:56 SkyScan query 08:16:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.885<-18859 Statuses=0008 0009 08:16:56 Msec=750 True Az=112.995 Ze=-102.885 Az status=0008 Ze status=0009 08:16:56 Check angles 08:16:56 SkyScan query 08:16:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 08:16:57 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 08:16:57 Check angles 08:16:57 SkyScan query 08:16:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.275<-21685 Statuses=0008 0009 08:16:58 Msec=2250 True Az=112.995 Ze=-145.275 Az status=0008 Ze status=0009 08:16:58 Check angles 08:16:58 SkyScan query 08:16:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.665<-23111 Statuses=0008 0009 08:16:59 Msec=3000 True Az=112.995 Ze=-166.665 Az status=0008 Ze status=0009 08:16:59 Check angles 08:16:59 SkyScan query 08:16:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:16:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:16:59 Message to Master queued w/err=0: serial=268233 error=0 08:17:04 Received message from Master: op=Filter serial=268234 08:17:04 Color wheel filter change from 0 to 0 08:17:04 FLIGetFilterPos err=0 currentPosition=0 08:17:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:04 Filter is already there-color wheel unchanged 08:17:05 Received message from Master: op=Shutter serial=268235 08:17:05 Shutter LASER open 08:17:05 Received message from Camera: op=State serial=268237 08:17:05 GetSingleValue result=40 Value=cccccccc 08:17:05 SkyScan query 08:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:17:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:05 Parameters OK 08:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:05 Set A/D data flow result=40 08:17:05 Set A/D channel type result=40 08:17:05 Set A/D encoding result=40 08:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:05 Set channel filter=0.000000e+000 result=40 08:17:05 Config A/D Result=40 08:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:05 Get A/D filter: -9.255963e+061 result=40 08:17:05 Get A/D value=-858993460 result=40 08:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:05 Parameters OK 08:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:05 Set A/D data flow result=40 08:17:05 Set A/D channel type result=40 08:17:05 Set A/D encoding result=40 08:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:05 Set channel filter=0.000000e+000 result=40 08:17:05 Config A/D Result=40 08:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:05 Get A/D filter: -9.255963e+061 result=40 08:17:05 Get A/D value=-858993460 result=40 08:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:05 Aux= 08:17:05 Message to Camera, serial 268237 queued 08:17:14 Received message from Master: op=Shutter serial=268247 08:17:14 Shutter LASER close 08:17:14 Received message from Master: op=PointingHead serial=268251 08:17:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:17:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:17:15 Point started: ret=0 08:17:15 point_skyscan result=0 08:17:15 Check angles 08:17:15 SkyScan query 08:17:16 SkyScan query done: ret=0 az=89.535<-5969 ze=156.855<-1543 Statuses=0009 0009 08:17:16 Msec=0 True Az=89.535 Ze=156.855 Az status=0009 Ze status=0009 08:17:16 Check angles 08:17:16 SkyScan query 08:17:17 SkyScan query done: ret=0 az=72.06<-4804 ze=135.9<-2940 Statuses=0009 0009 08:17:17 Msec=750 True Az=72.06 Ze=135.9 Az status=0009 Ze status=0009 08:17:17 Check angles 08:17:17 SkyScan query 08:17:17 SkyScan query done: ret=0 az=54.57<-3638 ze=114.9<-4340 Statuses=0009 0009 08:17:17 Msec=1500 True Az=54.57 Ze=114.9 Az status=0009 Ze status=0009 08:17:18 Check angles 08:17:18 SkyScan query 08:17:18 SkyScan query done: ret=0 az=40.995<-2733 ze=93.975<-5735 Statuses=0009 0009 08:17:18 Msec=2250 True Az=40.995 Ze=93.975 Az status=0009 Ze status=0009 08:17:18 Check angles 08:17:18 SkyScan query 08:17:19 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 08:17:19 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 08:17:19 Check angles 08:17:19 SkyScan query 08:17:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 08:17:20 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 08:17:20 Check angles 08:17:20 SkyScan query 08:17:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:17:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:17:20 Message to Master queued w/err=0: serial=268251 error=0 08:17:25 Received message from Master: op=Filter serial=268252 08:17:25 Color wheel filter change from 0 to 0 08:17:25 FLIGetFilterPos err=0 currentPosition=0 08:17:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:25 Filter is already there-color wheel unchanged 08:17:26 Received message from Master: op=Shutter serial=268253 08:17:26 Shutter LASER close 08:17:26 Received message from Camera: op=State serial=268255 08:17:26 GetSingleValue result=40 Value=cccccccc 08:17:26 SkyScan query 08:17:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:17:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:26 Parameters OK 08:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:26 Set A/D data flow result=40 08:17:26 Set A/D channel type result=40 08:17:26 Set A/D encoding result=40 08:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:26 Set channel filter=0.000000e+000 result=40 08:17:26 Config A/D Result=40 08:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:26 Get A/D filter: -9.255963e+061 result=40 08:17:26 Get A/D value=-858993460 result=40 08:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:26 Parameters OK 08:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:26 Set A/D data flow result=40 08:17:26 Set A/D channel type result=40 08:17:26 Set A/D encoding result=40 08:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:26 Set channel filter=0.000000e+000 result=40 08:17:26 Config A/D Result=40 08:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:26 Get A/D filter: -9.255963e+061 result=40 08:17:26 Get A/D value=-858993460 result=40 08:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:26 Aux= 08:17:26 Message to Camera, serial 268255 queued 08:18:03 Received message from Master: op=PointingHead serial=268268 08:18:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:18:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:18:03 Point started: ret=0 08:18:03 point_skyscan result=0 08:18:04 Check angles 08:18:04 SkyScan query 08:18:05 SkyScan query done: ret=0 az=63.825<-4255 ze=66.54<-7564 Statuses=0009 0008 08:18:05 Msec=0 True Az=63.825 Ze=66.54 Az status=0009 Ze status=0008 08:18:05 Check angles 08:18:05 SkyScan query 08:18:06 SkyScan query done: ret=0 az=81.33<-5422 ze=66.51<-7566 Statuses=0009 0008 08:18:06 Msec=750 True Az=81.33 Ze=66.51 Az status=0009 Ze status=0008 08:18:06 Check angles 08:18:06 SkyScan query 08:18:06 SkyScan query done: ret=0 az=98.82<-6588 ze=66.495<-7567 Statuses=0009 0008 08:18:06 Msec=1500 True Az=98.82 Ze=66.495 Az status=0009 Ze status=0008 08:18:06 Check angles 08:18:06 SkyScan query 08:18:07 SkyScan query done: ret=0 az=116.145<-7743 ze=66.495<-7567 Statuses=0009 0008 08:18:07 Msec=2250 True Az=116.145 Ze=66.495 Az status=0009 Ze status=0008 08:18:07 Check angles 08:18:07 SkyScan query 08:18:08 SkyScan query done: ret=0 az=133.575<-8905 ze=66.495<-7567 Statuses=0009 0008 08:18:08 Msec=3000 True Az=133.575 Ze=66.495 Az status=0009 Ze status=0008 08:18:08 Check angles 08:18:08 SkyScan query 08:18:09 SkyScan query done: ret=0 az=151.14<-10076 ze=66.495<-7567 Statuses=0009 0008 08:18:09 Msec=3750 True Az=151.14 Ze=66.495 Az status=0009 Ze status=0008 08:18:09 Check angles 08:18:09 SkyScan query 08:18:09 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:18:09 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:18:09 Message to Master queued w/err=0: serial=268268 error=0 08:18:14 Received message from Master: op=Filter serial=268269 08:18:14 Color wheel filter change from 0 to 0 08:18:14 FLIGetFilterPos err=0 currentPosition=0 08:18:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:14 Filter is already there-color wheel unchanged 08:18:14 Received message from Master: op=Shutter serial=268270 08:18:14 Shutter LASER close 08:18:14 Received message from Camera: op=State serial=268272 08:18:14 GetSingleValue result=40 Value=cccccccc 08:18:14 SkyScan query 08:18:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:18:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:15 Parameters OK 08:18:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:15 Set A/D data flow result=40 08:18:15 Set A/D channel type result=40 08:18:15 Set A/D encoding result=40 08:18:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:15 Set channel filter=0.000000e+000 result=40 08:18:15 Config A/D Result=40 08:18:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:15 Get A/D filter: -9.255963e+061 result=40 08:18:15 Get A/D value=-858993460 result=40 08:18:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:15 Parameters OK 08:18:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:15 Set A/D data flow result=40 08:18:15 Set A/D channel type result=40 08:18:15 Set A/D encoding result=40 08:18:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:15 Set channel filter=0.000000e+000 result=40 08:18:15 Config A/D Result=40 08:18:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:15 Get A/D filter: -9.255963e+061 result=40 08:18:15 Get A/D value=-858993460 result=40 08:18:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:15 Aux= 08:18:15 Message to Camera, serial 268272 queued 08:18:52 Received message from Master: op=PointingHead serial=268285 08:18:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:18:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:18:52 Point started: ret=0 08:18:52 point_skyscan result=0 08:18:53 Check angles 08:18:53 SkyScan query 08:18:54 SkyScan query done: ret=0 az=134.745<-8983 ze=96.6<-5560 Statuses=0009 0009 08:18:54 Msec=0 True Az=134.745 Ze=96.6 Az status=0009 Ze status=0009 08:18:54 Check angles 08:18:54 SkyScan query 08:18:54 SkyScan query done: ret=0 az=130.995<-8733 ze=117.585<-4161 Statuses=0008 0009 08:18:54 Msec=750 True Az=130.995 Ze=117.585 Az status=0008 Ze status=0009 08:18:55 Check angles 08:18:55 SkyScan query 08:18:55 SkyScan query done: ret=0 az=130.995<-8733 ze=138.465<-2769 Statuses=0008 0009 08:18:55 Msec=1500 True Az=130.995 Ze=138.465 Az status=0008 Ze status=0009 08:18:55 Check angles 08:18:55 SkyScan query 08:18:56 SkyScan query done: ret=0 az=130.995<-8733 ze=159.465<-1369 Statuses=0008 0009 08:18:56 Msec=2250 True Az=130.995 Ze=159.465 Az status=0008 Ze status=0009 08:18:56 Check angles 08:18:56 SkyScan query 08:18:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.58<-23972 Statuses=0008 0009 08:18:57 Msec=3000 True Az=130.995 Ze=-179.58 Az status=0008 Ze status=0009 08:18:57 Check angles 08:18:57 SkyScan query 08:18:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.205<-22547 Statuses=0008 0009 08:18:57 Msec=3750 True Az=130.995 Ze=-158.205 Az status=0008 Ze status=0009 08:18:58 Check angles 08:18:58 SkyScan query 08:18:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 08:18:58 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 08:18:58 Check angles 08:18:58 SkyScan query 08:18:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:18:59 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:18:59 Message to Master queued w/err=0: serial=268285 error=0 08:19:04 Received message from Master: op=Filter serial=268286 08:19:04 Color wheel filter change from 0 to 0 08:19:04 FLIGetFilterPos err=0 currentPosition=0 08:19:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:04 Filter is already there-color wheel unchanged 08:19:04 Received message from Master: op=Shutter serial=268287 08:19:04 Shutter LASER close 08:19:04 Received message from Camera: op=State serial=268289 08:19:04 GetSingleValue result=40 Value=cccccccc 08:19:04 SkyScan query 08:19:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:19:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:05 Parameters OK 08:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:05 Set A/D data flow result=40 08:19:05 Set A/D channel type result=40 08:19:05 Set A/D encoding result=40 08:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:05 Set channel filter=0.000000e+000 result=40 08:19:05 Config A/D Result=40 08:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:05 Get A/D filter: -9.255963e+061 result=40 08:19:05 Get A/D value=-858993460 result=40 08:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:05 Parameters OK 08:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:05 Set A/D data flow result=40 08:19:05 Set A/D channel type result=40 08:19:05 Set A/D encoding result=40 08:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:05 Set channel filter=0.000000e+000 result=40 08:19:05 Config A/D Result=40 08:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:05 Get A/D filter: -9.255963e+061 result=40 08:19:05 Get A/D value=-858993460 result=40 08:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:05 Aux= 08:19:05 Message to Camera, serial 268289 queued 08:19:42 Received message from Master: op=PointingHead serial=268302 08:19:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:19:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:19:42 Point started: ret=0 08:19:42 point_skyscan result=0 08:19:43 Check angles 08:19:43 SkyScan query 08:19:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 08:19:43 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 08:19:44 Check angles 08:19:44 SkyScan query 08:19:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:19:44 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:19:44 Message to Master queued w/err=0: serial=268302 error=0 08:19:49 Received message from Master: op=Filter serial=268303 08:19:49 Color wheel filter change from 0 to 0 08:19:49 FLIGetFilterPos err=0 currentPosition=0 08:19:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:49 Filter is already there-color wheel unchanged 08:19:49 Received message from Master: op=Shutter serial=268304 08:19:49 Shutter LASER open 08:19:49 Received message from Camera: op=State serial=268306 08:19:49 GetSingleValue result=40 Value=cccccccc 08:19:49 SkyScan query 08:19:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:19:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:50 Parameters OK 08:19:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:50 Set A/D data flow result=40 08:19:50 Set A/D channel type result=40 08:19:50 Set A/D encoding result=40 08:19:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:50 Set channel filter=0.000000e+000 result=40 08:19:50 Config A/D Result=40 08:19:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:50 Get A/D filter: -9.255963e+061 result=40 08:19:50 Get A/D value=-858993460 result=40 08:19:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:50 Parameters OK 08:19:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:50 Set A/D data flow result=40 08:19:50 Set A/D channel type result=40 08:19:50 Set A/D encoding result=40 08:19:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:50 Set channel filter=0.000000e+000 result=40 08:19:50 Config A/D Result=40 08:19:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:50 Get A/D filter: -9.255963e+061 result=40 08:19:50 Get A/D value=-858993460 result=40 08:19:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:50 Aux= 08:19:50 Message to Camera, serial 268306 queued 08:19:58 Received message from Master: op=Shutter serial=268316 08:19:58 Shutter LASER close 08:19:59 Received message from Master: op=PointingHead serial=268320 08:19:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:19:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:19:59 Point started: ret=0 08:19:59 point_skyscan result=0 08:20:00 Check angles 08:20:00 SkyScan query 08:20:01 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.19<-21546 Statuses=0009 0009 08:20:01 Msec=0 True Az=136.095 Ze=-143.19 Az status=0009 Ze status=0009 08:20:01 Check angles 08:20:01 SkyScan query 08:20:01 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.77<-20118 Statuses=0009 0009 08:20:01 Msec=750 True Az=153.9 Ze=-121.77 Az status=0009 Ze status=0009 08:20:02 Check angles 08:20:02 SkyScan query 08:20:02 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.77<-18718 Statuses=0009 0009 08:20:02 Msec=1500 True Az=171.435 Ze=-100.77 Az status=0009 Ze status=0009 08:20:02 Check angles 08:20:02 SkyScan query 08:20:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.875<-17325 Statuses=0008 0009 08:20:03 Msec=2250 True Az=176.01 Ze=-79.875 Az status=0008 Ze status=0009 08:20:03 Check angles 08:20:03 SkyScan query 08:20:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.395<-15893 Statuses=0008 0009 08:20:04 Msec=3000 True Az=176.01 Ze=-58.395 Az status=0008 Ze status=0009 08:20:04 Check angles 08:20:04 SkyScan query 08:20:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:20:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:20:04 Message to Master queued w/err=0: serial=268320 error=0 08:20:09 Received message from Master: op=Filter serial=268321 08:20:09 Color wheel filter change from 0 to 0 08:20:09 FLIGetFilterPos err=0 currentPosition=0 08:20:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:09 Filter is already there-color wheel unchanged 08:20:10 Received message from Master: op=Shutter serial=268322 08:20:10 Shutter LASER close 08:20:10 Received message from Camera: op=State serial=268324 08:20:10 GetSingleValue result=40 Value=cccccccc 08:20:10 SkyScan query 08:20:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:20:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:10 Parameters OK 08:20:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:10 Set A/D data flow result=40 08:20:10 Set A/D channel type result=40 08:20:10 Set A/D encoding result=40 08:20:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:10 Set channel filter=0.000000e+000 result=40 08:20:10 Config A/D Result=40 08:20:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:10 Get A/D filter: -9.255963e+061 result=40 08:20:10 Get A/D value=-858993460 result=40 08:20:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:10 Parameters OK 08:20:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:10 Set A/D data flow result=40 08:20:10 Set A/D channel type result=40 08:20:10 Set A/D encoding result=40 08:20:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:10 Set channel filter=0.000000e+000 result=40 08:20:10 Config A/D Result=40 08:20:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:10 Get A/D filter: -9.255963e+061 result=40 08:20:10 Get A/D value=-858993460 result=40 08:20:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:10 Aux= 08:20:10 Message to Camera, serial 268324 queued 08:20:47 Received message from Master: op=PointingHead serial=268337 08:20:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:20:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:20:48 Point started: ret=0 08:20:48 point_skyscan result=0 08:20:48 Check angles 08:20:48 SkyScan query 08:20:49 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.81<-13454 Statuses=0009 0009 08:20:49 Msec=0 True Az=152.97 Ze=-21.81 Az status=0009 Ze status=0009 08:20:49 Check angles 08:20:49 SkyScan query 08:20:50 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.315<-12021 Statuses=0009 0009 08:20:50 Msec=750 True Az=135.135 Ze=-0.315 Az status=0009 Ze status=0009 08:20:50 Check angles 08:20:50 SkyScan query 08:20:50 SkyScan query done: ret=0 az=117.72<-7848 ze=20.61<-10626 Statuses=0009 0009 08:20:50 Msec=1500 True Az=117.72 Ze=20.61 Az status=0009 Ze status=0009 08:20:51 Check angles 08:20:51 SkyScan query 08:20:51 SkyScan query done: ret=0 az=100.335<-6689 ze=41.58<-9228 Statuses=0009 0009 08:20:51 Msec=2250 True Az=100.335 Ze=41.58 Az status=0009 Ze status=0009 08:20:51 Check angles 08:20:51 SkyScan query 08:20:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 08:20:52 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 08:20:52 Check angles 08:20:52 SkyScan query 08:20:53 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 08:20:53 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 08:20:53 Message to Master queued w/err=0: serial=268337 error=0 08:20:58 Received message from Master: op=Filter serial=268338 08:20:58 Color wheel filter change from 0 to 0 08:20:58 FLIGetFilterPos err=0 currentPosition=0 08:20:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:58 Filter is already there-color wheel unchanged 08:20:58 Received message from Master: op=Shutter serial=268339 08:20:58 Shutter LASER close 08:20:58 Received message from Camera: op=State serial=268341 08:20:58 GetSingleValue result=40 Value=cccccccc 08:20:58 SkyScan query 08:20:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:20:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:58 Parameters OK 08:20:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:58 Set A/D data flow result=40 08:20:58 Set A/D channel type result=40 08:20:58 Set A/D encoding result=40 08:20:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:58 Set channel filter=0.000000e+000 result=40 08:20:58 Config A/D Result=40 08:20:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:58 Get A/D filter: -9.255963e+061 result=40 08:20:58 Get A/D value=-858993460 result=40 08:20:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:58 Parameters OK 08:20:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:58 Set A/D data flow result=40 08:20:58 Set A/D channel type result=40 08:20:58 Set A/D encoding result=40 08:20:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:58 Set channel filter=0.000000e+000 result=40 08:20:58 Config A/D Result=40 08:20:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:58 Get A/D filter: -9.255963e+061 result=40 08:20:58 Get A/D value=-858993460 result=40 08:20:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:58 Aux= 08:20:58 Message to Camera, serial 268341 queued 08:21:35 Received message from Master: op=PointingHead serial=268354 08:21:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:21:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:21:36 Point started: ret=0 08:21:36 point_skyscan result=0 08:21:37 Check angles 08:21:37 SkyScan query 08:21:37 SkyScan query done: ret=0 az=85.995<-5733 ze=21.735<-10551 Statuses=0008 0009 08:21:37 Msec=0 True Az=85.995 Ze=21.735 Az status=0008 Ze status=0009 08:21:37 Check angles 08:21:37 SkyScan query 08:21:38 SkyScan query done: ret=0 az=85.995<-5733 ze=0.87<-11942 Statuses=0008 0009 08:21:38 Msec=750 True Az=85.995 Ze=0.87 Az status=0008 Ze status=0009 08:21:38 Check angles 08:21:38 SkyScan query 08:21:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.13<-13342 Statuses=0008 0009 08:21:39 Msec=1500 True Az=85.995 Ze=-20.13 Az status=0008 Ze status=0009 08:21:39 Check angles 08:21:39 SkyScan query 08:21:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.505<-14767 Statuses=0008 0009 08:21:39 Msec=2250 True Az=85.995 Ze=-41.505 Az status=0008 Ze status=0009 08:21:40 Check angles 08:21:40 SkyScan query 08:21:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:21:40 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:21:40 Message to Master queued w/err=0: serial=268354 error=0 08:21:45 Received message from Master: op=Filter serial=268355 08:21:45 Color wheel filter change from 0 to 0 08:21:45 FLIGetFilterPos err=0 currentPosition=0 08:21:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:45 Filter is already there-color wheel unchanged 08:21:45 Received message from Master: op=Shutter serial=268356 08:21:45 Shutter LASER close 08:21:45 Received message from Camera: op=State serial=268358 08:21:45 GetSingleValue result=40 Value=cccccccc 08:21:45 SkyScan query 08:21:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:21:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:46 Parameters OK 08:21:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:46 Set A/D data flow result=40 08:21:46 Set A/D channel type result=40 08:21:46 Set A/D encoding result=40 08:21:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:46 Set channel filter=0.000000e+000 result=40 08:21:46 Config A/D Result=40 08:21:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:46 Get A/D filter: -9.255963e+061 result=40 08:21:46 Get A/D value=-858993460 result=40 08:21:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:46 Parameters OK 08:21:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:46 Set A/D data flow result=40 08:21:46 Set A/D channel type result=40 08:21:46 Set A/D encoding result=40 08:21:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:46 Set channel filter=0.000000e+000 result=40 08:21:46 Config A/D Result=40 08:21:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:46 Get A/D filter: -9.255963e+061 result=40 08:21:46 Get A/D value=-858993460 result=40 08:21:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:46 Aux= 08:21:46 Message to Camera, serial 268358 queued 08:22:23 Received message from Master: op=PointingHead serial=268371 08:22:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:22:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:22:23 Point started: ret=0 08:22:23 point_skyscan result=0 08:22:24 Check angles 08:22:24 SkyScan query 08:22:24 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.525<-17435 Statuses=0009 0009 08:22:24 Msec=0 True Az=109.185 Ze=-81.525 Az status=0009 Ze status=0009 08:22:25 Check angles 08:22:25 SkyScan query 08:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.45<-18830 Statuses=0008 0009 08:22:25 Msec=750 True Az=112.995 Ze=-102.45 Az status=0008 Ze status=0009 08:22:25 Check angles 08:22:25 SkyScan query 08:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.84<-20256 Statuses=0008 0009 08:22:26 Msec=1500 True Az=112.995 Ze=-123.84 Az status=0008 Ze status=0009 08:22:26 Check angles 08:22:26 SkyScan query 08:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 08:22:27 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 08:22:27 Check angles 08:22:27 SkyScan query 08:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 08:22:27 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 08:22:28 Check angles 08:22:28 SkyScan query 08:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:22:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:22:28 Message to Master queued w/err=0: serial=268371 error=0 08:22:33 Received message from Master: op=Filter serial=268372 08:22:33 Color wheel filter change from 0 to 0 08:22:33 FLIGetFilterPos err=0 currentPosition=0 08:22:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:33 Filter is already there-color wheel unchanged 08:22:33 Received message from Master: op=Shutter serial=268373 08:22:33 Shutter LASER open 08:22:34 Received message from Camera: op=State serial=268375 08:22:34 GetSingleValue result=40 Value=cccccccc 08:22:34 SkyScan query 08:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:22:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:34 Parameters OK 08:22:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:34 Set A/D data flow result=40 08:22:34 Set A/D channel type result=40 08:22:34 Set A/D encoding result=40 08:22:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:34 Set channel filter=0.000000e+000 result=40 08:22:34 Config A/D Result=40 08:22:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:34 Get A/D filter: -9.255963e+061 result=40 08:22:34 Get A/D value=-858993460 result=40 08:22:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:34 Parameters OK 08:22:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:34 Set A/D data flow result=40 08:22:34 Set A/D channel type result=40 08:22:34 Set A/D encoding result=40 08:22:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:34 Set channel filter=0.000000e+000 result=40 08:22:34 Config A/D Result=40 08:22:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:34 Get A/D filter: -9.255963e+061 result=40 08:22:34 Get A/D value=-858993460 result=40 08:22:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:34 Aux= 08:22:34 Message to Camera, serial 268375 queued 08:22:43 Received message from Master: op=Shutter serial=268385 08:22:43 Shutter LASER close 08:22:43 Received message from Master: op=PointingHead serial=268389 08:22:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:22:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:22:43 Point started: ret=0 08:22:43 point_skyscan result=0 08:22:44 Check angles 08:22:44 SkyScan query 08:22:45 SkyScan query done: ret=0 az=89.88<-5992 ze=157.29<-1514 Statuses=0009 0009 08:22:45 Msec=0 True Az=89.88 Ze=157.29 Az status=0009 Ze status=0009 08:22:45 Check angles 08:22:45 SkyScan query 08:22:45 SkyScan query done: ret=0 az=72.48<-4832 ze=136.335<-2911 Statuses=0009 0009 08:22:45 Msec=750 True Az=72.48 Ze=136.335 Az status=0009 Ze status=0009 08:22:46 Check angles 08:22:46 SkyScan query 08:22:46 SkyScan query done: ret=0 az=55.065<-3671 ze=115.44<-4304 Statuses=0009 0009 08:22:46 Msec=1500 True Az=55.065 Ze=115.44 Az status=0009 Ze status=0009 08:22:46 Check angles 08:22:46 SkyScan query 08:22:47 SkyScan query done: ret=0 az=40.98<-2732 ze=94.005<-5733 Statuses=0009 0009 08:22:47 Msec=2250 True Az=40.98 Ze=94.005 Az status=0009 Ze status=0009 08:22:47 Check angles 08:22:47 SkyScan query 08:22:48 SkyScan query done: ret=0 az=40.995<-2733 ze=72.99<-7134 Statuses=0008 0009 08:22:48 Msec=3000 True Az=40.995 Ze=72.99 Az status=0008 Ze status=0009 08:22:48 Check angles 08:22:48 SkyScan query 08:22:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 08:22:48 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 08:22:49 Check angles 08:22:49 SkyScan query 08:22:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:22:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:22:49 Message to Master queued w/err=0: serial=268389 error=0 08:22:54 Received message from Master: op=Filter serial=268390 08:22:54 Color wheel filter change from 0 to 0 08:22:54 FLIGetFilterPos err=0 currentPosition=0 08:22:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:54 Filter is already there-color wheel unchanged 08:22:54 Received message from Master: op=Shutter serial=268391 08:22:54 Shutter LASER close 08:22:55 Received message from Camera: op=State serial=268393 08:22:55 GetSingleValue result=40 Value=cccccccc 08:22:55 SkyScan query 08:22:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:22:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:55 Parameters OK 08:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:55 Set A/D data flow result=40 08:22:55 Set A/D channel type result=40 08:22:55 Set A/D encoding result=40 08:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:55 Set channel filter=0.000000e+000 result=40 08:22:55 Config A/D Result=40 08:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:55 Get A/D filter: -9.255963e+061 result=40 08:22:55 Get A/D value=-858993460 result=40 08:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:55 Parameters OK 08:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:55 Set A/D data flow result=40 08:22:55 Set A/D channel type result=40 08:22:55 Set A/D encoding result=40 08:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:55 Set channel filter=0.000000e+000 result=40 08:22:55 Config A/D Result=40 08:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:55 Get A/D filter: -9.255963e+061 result=40 08:22:55 Get A/D value=-858993460 result=40 08:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:55 Aux= 08:22:55 Message to Camera, serial 268393 queued 08:23:32 Received message from Master: op=PointingHead serial=268406 08:23:32 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:23:32 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:23:32 Point started: ret=0 08:23:32 point_skyscan result=0 08:23:33 Check angles 08:23:33 SkyScan query 08:23:34 SkyScan query done: ret=0 az=63.975<-4265 ze=66.54<-7564 Statuses=0009 0008 08:23:34 Msec=0 True Az=63.975 Ze=66.54 Az status=0009 Ze status=0008 08:23:34 Check angles 08:23:34 SkyScan query 08:23:34 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 08:23:34 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 08:23:35 Check angles 08:23:35 SkyScan query 08:23:35 SkyScan query done: ret=0 az=98.88<-6592 ze=66.495<-7567 Statuses=0009 0008 08:23:35 Msec=1500 True Az=98.88 Ze=66.495 Az status=0009 Ze status=0008 08:23:35 Check angles 08:23:35 SkyScan query 08:23:36 SkyScan query done: ret=0 az=116.325<-7755 ze=66.495<-7567 Statuses=0009 0008 08:23:36 Msec=2250 True Az=116.325 Ze=66.495 Az status=0009 Ze status=0008 08:23:36 Check angles 08:23:36 SkyScan query 08:23:37 SkyScan query done: ret=0 az=133.755<-8917 ze=66.495<-7567 Statuses=0009 0008 08:23:37 Msec=3000 True Az=133.755 Ze=66.495 Az status=0009 Ze status=0008 08:23:37 Check angles 08:23:37 SkyScan query 08:23:37 SkyScan query done: ret=0 az=151.275<-10085 ze=66.495<-7567 Statuses=0009 0008 08:23:37 Msec=3750 True Az=151.275 Ze=66.495 Az status=0009 Ze status=0008 08:23:38 Check angles 08:23:38 SkyScan query 08:23:38 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:23:38 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:23:38 Message to Master queued w/err=0: serial=268406 error=0 08:23:43 Received message from Master: op=Filter serial=268407 08:23:43 Color wheel filter change from 0 to 0 08:23:43 FLIGetFilterPos err=0 currentPosition=0 08:23:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:43 Filter is already there-color wheel unchanged 08:23:43 Received message from Master: op=Shutter serial=268408 08:23:43 Shutter LASER close 08:23:43 Received message from Camera: op=State serial=268410 08:23:43 GetSingleValue result=40 Value=cccccccc 08:23:43 SkyScan query 08:23:44 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:23:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:44 Parameters OK 08:23:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:44 Set A/D data flow result=40 08:23:44 Set A/D channel type result=40 08:23:44 Set A/D encoding result=40 08:23:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:44 Set channel filter=0.000000e+000 result=40 08:23:44 Config A/D Result=40 08:23:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:44 Get A/D filter: -9.255963e+061 result=40 08:23:44 Get A/D value=-858993460 result=40 08:23:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:44 Parameters OK 08:23:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:44 Set A/D data flow result=40 08:23:44 Set A/D channel type result=40 08:23:44 Set A/D encoding result=40 08:23:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:44 Set channel filter=0.000000e+000 result=40 08:23:44 Config A/D Result=40 08:23:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:44 Get A/D filter: -9.255963e+061 result=40 08:23:44 Get A/D value=-858993460 result=40 08:23:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:44 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:44 Aux= 08:23:44 Message to Camera, serial 268410 queued 08:24:20 Received message from Master: op=PointingHead serial=268422 08:24:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:24:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:24:20 Point started: ret=0 08:24:20 point_skyscan result=0 08:24:21 Check angles 08:24:21 SkyScan query 08:24:22 SkyScan query done: ret=0 az=135.12<-9008 ze=96.165<-5589 Statuses=0009 0009 08:24:22 Msec=0 True Az=135.12 Ze=96.165 Az status=0009 Ze status=0009 08:24:22 Check angles 08:24:22 SkyScan query 08:24:22 SkyScan query done: ret=0 az=130.995<-8733 ze=117.12<-4192 Statuses=0008 0009 08:24:22 Msec=750 True Az=130.995 Ze=117.12 Az status=0008 Ze status=0009 08:24:23 Check angles 08:24:23 SkyScan query 08:24:23 SkyScan query done: ret=0 az=130.995<-8733 ze=138.045<-2797 Statuses=0008 0009 08:24:23 Msec=1500 True Az=130.995 Ze=138.045 Az status=0008 Ze status=0009 08:24:23 Check angles 08:24:23 SkyScan query 08:24:24 SkyScan query done: ret=0 az=130.995<-8733 ze=159.015<-1399 Statuses=0008 0009 08:24:24 Msec=2250 True Az=130.995 Ze=159.015 Az status=0008 Ze status=0009 08:24:24 Check angles 08:24:24 SkyScan query 08:24:25 SkyScan query done: ret=0 az=130.995<-8733 ze=179.925<-5 Statuses=0008 0009 08:24:25 Msec=3000 True Az=130.995 Ze=179.925 Az status=0008 Ze status=0009 08:24:25 Check angles 08:24:25 SkyScan query 08:24:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-159.075<-22605 Statuses=0008 0009 08:24:25 Msec=3750 True Az=130.995 Ze=-159.075 Az status=0008 Ze status=0009 08:24:26 Check angles 08:24:26 SkyScan query 08:24:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 08:24:26 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 08:24:26 Check angles 08:24:26 SkyScan query 08:24:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:24:27 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:24:27 Message to Master queued w/err=0: serial=268422 error=0 08:24:32 Received message from Master: op=Filter serial=268423 08:24:32 Color wheel filter change from 0 to 0 08:24:32 FLIGetFilterPos err=0 currentPosition=0 08:24:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:32 Filter is already there-color wheel unchanged 08:24:32 Received message from Master: op=Shutter serial=268424 08:24:32 Shutter LASER close 08:24:32 Received message from Camera: op=State serial=268426 08:24:32 GetSingleValue result=40 Value=cccccccc 08:24:32 SkyScan query 08:24:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:24:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:33 Parameters OK 08:24:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:33 Set A/D data flow result=40 08:24:33 Set A/D channel type result=40 08:24:33 Set A/D encoding result=40 08:24:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:33 Set channel filter=0.000000e+000 result=40 08:24:33 Config A/D Result=40 08:24:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:33 Get A/D filter: -9.255963e+061 result=40 08:24:33 Get A/D value=-858993460 result=40 08:24:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:33 Parameters OK 08:24:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:33 Set A/D data flow result=40 08:24:33 Set A/D channel type result=40 08:24:33 Set A/D encoding result=40 08:24:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:33 Set channel filter=0.000000e+000 result=40 08:24:33 Config A/D Result=40 08:24:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:33 Get A/D filter: -9.255963e+061 result=40 08:24:33 Get A/D value=-858993460 result=40 08:24:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:33 Aux= 08:24:33 Message to Camera, serial 268426 queued 08:25:10 Received message from Master: op=PointingHead serial=268439 08:25:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:25:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:25:10 Point started: ret=0 08:25:10 point_skyscan result=0 08:25:11 Check angles 08:25:11 SkyScan query 08:25:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 08:25:11 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 08:25:11 Check angles 08:25:11 SkyScan query 08:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:25:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:25:12 Message to Master queued w/err=0: serial=268439 error=0 08:25:17 Received message from Master: op=Filter serial=268440 08:25:17 Color wheel filter change from 0 to 0 08:25:17 FLIGetFilterPos err=0 currentPosition=0 08:25:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:17 Filter is already there-color wheel unchanged 08:25:17 Received message from Master: op=Shutter serial=268441 08:25:17 Shutter LASER open 08:25:17 Received message from Camera: op=State serial=268443 08:25:17 GetSingleValue result=40 Value=cccccccc 08:25:17 SkyScan query 08:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:25:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:18 Parameters OK 08:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:18 Set A/D data flow result=40 08:25:18 Set A/D channel type result=40 08:25:18 Set A/D encoding result=40 08:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:18 Set channel filter=0.000000e+000 result=40 08:25:18 Config A/D Result=40 08:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:18 Get A/D filter: -9.255963e+061 result=40 08:25:18 Get A/D value=-858993460 result=40 08:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:18 Parameters OK 08:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:18 Set A/D data flow result=40 08:25:18 Set A/D channel type result=40 08:25:18 Set A/D encoding result=40 08:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:18 Set channel filter=0.000000e+000 result=40 08:25:18 Config A/D Result=40 08:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:18 Get A/D filter: -9.255963e+061 result=40 08:25:18 Get A/D value=-858993460 result=40 08:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:18 Aux= 08:25:18 Message to Camera, serial 268443 queued 08:25:26 Received message from Master: op=Shutter serial=268453 08:25:26 Shutter LASER close 08:25:27 Received message from Master: op=PointingHead serial=268457 08:25:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:25:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:25:27 Point started: ret=0 08:25:27 point_skyscan result=0 [UTC 2018-12-19 08:25:28] 08:25:28 Check angles 08:25:28 SkyScan query 08:25:29 SkyScan query done: ret=0 az=137.805<-9187 ze=-141.225<-21415 Statuses=0009 0009 08:25:29 Msec=0 True Az=137.805 Ze=-141.225 Az status=0009 Ze status=0009 08:25:29 Check angles 08:25:29 SkyScan query 08:25:29 SkyScan query done: ret=0 az=154.125<-10275 ze=-121.455<-20097 Statuses=0009 0009 08:25:29 Msec=750 True Az=154.125 Ze=-121.455 Az status=0009 Ze status=0009 08:25:30 Check angles 08:25:30 SkyScan query 08:25:30 SkyScan query done: ret=0 az=171.585<-11439 ze=-100.41<-18694 Statuses=0009 0009 08:25:30 Msec=1500 True Az=171.585 Ze=-100.41 Az status=0009 Ze status=0009 08:25:30 Check angles 08:25:30 SkyScan query 08:25:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.11<-17274 Statuses=0008 0009 08:25:31 Msec=2250 True Az=176.01 Ze=-79.11 Az status=0008 Ze status=0009 08:25:31 Check angles 08:25:31 SkyScan query 08:25:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.78<-15852 Statuses=0008 0009 08:25:32 Msec=3000 True Az=176.01 Ze=-57.78 Az status=0008 Ze status=0009 08:25:32 Check angles 08:25:32 SkyScan query 08:25:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 08:25:32 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 08:25:32 Message to Master queued w/err=0: serial=268457 error=0 08:25:37 Received message from Master: op=Filter serial=268458 08:25:37 Color wheel filter change from 0 to 0 08:25:37 FLIGetFilterPos err=0 currentPosition=0 08:25:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:37 Filter is already there-color wheel unchanged 08:25:38 Received message from Master: op=Shutter serial=268459 08:25:38 Shutter LASER close 08:25:38 Received message from Camera: op=State serial=268461 08:25:38 GetSingleValue result=40 Value=cccccccc 08:25:38 SkyScan query 08:25:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:25:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:38 Parameters OK 08:25:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:38 Set A/D data flow result=40 08:25:38 Set A/D channel type result=40 08:25:38 Set A/D encoding result=40 08:25:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:38 Set channel filter=0.000000e+000 result=40 08:25:38 Config A/D Result=40 08:25:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:38 Get A/D filter: -9.255963e+061 result=40 08:25:38 Get A/D value=-858993460 result=40 08:25:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:38 Parameters OK 08:25:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:38 Set A/D data flow result=40 08:25:38 Set A/D channel type result=40 08:25:38 Set A/D encoding result=40 08:25:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:38 Set channel filter=0.000000e+000 result=40 08:25:38 Config A/D Result=40 08:25:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:38 Get A/D filter: -9.255963e+061 result=40 08:25:38 Get A/D value=-858993460 result=40 08:25:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:38 Aux= 08:25:38 Message to Camera, serial 268461 queued 08:26:15 Received message from Master: op=PointingHead serial=268474 08:26:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:26:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:26:15 Point started: ret=0 08:26:15 point_skyscan result=0 08:26:16 Check angles 08:26:16 SkyScan query 08:26:17 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.3<-13420 Statuses=0009 0009 08:26:17 Msec=0 True Az=152.715 Ze=-21.3 Az status=0009 Ze status=0009 08:26:17 Check angles 08:26:17 SkyScan query 08:26:18 SkyScan query done: ret=0 az=134.85<-8990 ze=0.045<-11997 Statuses=0009 0009 08:26:18 Msec=750 True Az=134.85 Ze=0.045 Az status=0009 Ze status=0009 08:26:18 Check angles 08:26:18 SkyScan query 08:26:18 SkyScan query done: ret=0 az=117.33<-7822 ze=21.09<-10594 Statuses=0009 0009 08:26:18 Msec=1500 True Az=117.33 Ze=21.09 Az status=0009 Ze status=0009 08:26:18 Check angles 08:26:18 SkyScan query 08:26:19 SkyScan query done: ret=0 az=100.02<-6668 ze=41.985<-9201 Statuses=0009 0009 08:26:19 Msec=2250 True Az=100.02 Ze=41.985 Az status=0009 Ze status=0009 08:26:19 Check angles 08:26:19 SkyScan query 08:26:20 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 08:26:20 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 08:26:20 Check angles 08:26:20 SkyScan query 08:26:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:26:21 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:26:21 Message to Master queued w/err=0: serial=268474 error=0 08:26:26 Received message from Master: op=Filter serial=268475 08:26:26 Color wheel filter change from 0 to 0 08:26:26 FLIGetFilterPos err=0 currentPosition=0 08:26:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:26 Filter is already there-color wheel unchanged 08:26:26 Received message from Master: op=Shutter serial=268476 08:26:26 Shutter LASER close 08:26:26 Received message from Camera: op=State serial=268478 08:26:26 GetSingleValue result=40 Value=cccccccc 08:26:26 SkyScan query 08:26:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:26:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:26 Parameters OK 08:26:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:26 Set A/D data flow result=40 08:26:26 Set A/D channel type result=40 08:26:26 Set A/D encoding result=40 08:26:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:26 Set channel filter=0.000000e+000 result=40 08:26:26 Config A/D Result=40 08:26:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:26 Get A/D filter: -9.255963e+061 result=40 08:26:26 Get A/D value=-858993460 result=40 08:26:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:26 Parameters OK 08:26:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:26 Set A/D data flow result=40 08:26:26 Set A/D channel type result=40 08:26:26 Set A/D encoding result=40 08:26:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:26 Set channel filter=0.000000e+000 result=40 08:26:26 Config A/D Result=40 08:26:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:26 Get A/D filter: -9.255963e+061 result=40 08:26:26 Get A/D value=-858993460 result=40 08:26:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:26 Aux= 08:26:26 Message to Camera, serial 268478 queued 08:27:03 Received message from Master: op=PointingHead serial=268491 08:27:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:27:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:27:04 Point started: ret=0 08:27:04 point_skyscan result=0 08:27:04 Check angles 08:27:04 SkyScan query 08:27:05 SkyScan query done: ret=0 az=85.995<-5733 ze=21.21<-10586 Statuses=0008 0009 08:27:05 Msec=0 True Az=85.995 Ze=21.21 Az status=0008 Ze status=0009 08:27:05 Check angles 08:27:05 SkyScan query 08:27:06 SkyScan query done: ret=0 az=86.01<-5734 ze=0.255<-11983 Statuses=0008 0009 08:27:06 Msec=750 True Az=86.01 Ze=0.255 Az status=0008 Ze status=0009 08:27:06 Check angles 08:27:06 SkyScan query 08:27:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.135<-13409 Statuses=0008 0009 08:27:07 Msec=1500 True Az=85.995 Ze=-21.135 Az status=0008 Ze status=0009 08:27:07 Check angles 08:27:07 SkyScan query 08:27:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.135<-14809 Statuses=0008 0009 08:27:07 Msec=2250 True Az=85.995 Ze=-42.135 Az status=0008 Ze status=0009 08:27:07 Check angles 08:27:07 SkyScan query 08:27:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:27:08 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:27:08 Message to Master queued w/err=0: serial=268491 error=0 08:27:13 Received message from Master: op=Filter serial=268492 08:27:13 Color wheel filter change from 0 to 0 08:27:13 FLIGetFilterPos err=0 currentPosition=0 08:27:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:13 Filter is already there-color wheel unchanged 08:27:13 Received message from Master: op=Shutter serial=268493 08:27:13 Shutter LASER close 08:27:13 Received message from Camera: op=State serial=268495 08:27:13 GetSingleValue result=40 Value=cccccccc 08:27:13 SkyScan query 08:27:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:27:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:14 Parameters OK 08:27:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:14 Set A/D data flow result=40 08:27:14 Set A/D channel type result=40 08:27:14 Set A/D encoding result=40 08:27:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:14 Set channel filter=0.000000e+000 result=40 08:27:14 Config A/D Result=40 08:27:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:14 Get A/D filter: -9.255963e+061 result=40 08:27:14 Get A/D value=-858993460 result=40 08:27:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:14 Parameters OK 08:27:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:14 Set A/D data flow result=40 08:27:14 Set A/D channel type result=40 08:27:14 Set A/D encoding result=40 08:27:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:14 Set channel filter=0.000000e+000 result=40 08:27:14 Config A/D Result=40 08:27:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:14 Get A/D filter: -9.255963e+061 result=40 08:27:14 Get A/D value=-858993460 result=40 08:27:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:14 Aux= 08:27:14 Message to Camera, serial 268495 queued 08:27:50 Received message from Master: op=PointingHead serial=268507 08:27:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:27:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:27:50 Point started: ret=0 08:27:50 point_skyscan result=0 08:27:51 Check angles 08:27:51 SkyScan query 08:27:51 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.555<-17437 Statuses=0009 0009 08:27:51 Msec=0 True Az=109.185 Ze=-81.555 Az status=0009 Ze status=0009 08:27:52 Check angles 08:27:52 SkyScan query 08:27:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.9<-18860 Statuses=0008 0009 08:27:52 Msec=750 True Az=112.995 Ze=-102.9 Az status=0008 Ze status=0009 08:27:52 Check angles 08:27:52 SkyScan query 08:27:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 08:27:53 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 08:27:53 Check angles 08:27:53 SkyScan query 08:27:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.78<-21652 Statuses=0008 0009 08:27:54 Msec=2250 True Az=112.995 Ze=-144.78 Az status=0008 Ze status=0009 08:27:54 Check angles 08:27:54 SkyScan query 08:27:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 08:27:54 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 08:27:55 Check angles 08:27:55 SkyScan query 08:27:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:27:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:27:55 Message to Master queued w/err=0: serial=268507 error=0 08:28:00 Received message from Master: op=Filter serial=268508 08:28:00 Color wheel filter change from 0 to 0 08:28:00 FLIGetFilterPos err=0 currentPosition=0 08:28:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:00 Filter is already there-color wheel unchanged 08:28:00 Received message from Master: op=Shutter serial=268509 08:28:00 Shutter LASER open 08:28:01 Received message from Camera: op=State serial=268511 08:28:01 GetSingleValue result=40 Value=cccccccc 08:28:01 SkyScan query 08:28:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:28:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:01 Parameters OK 08:28:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:01 Set A/D data flow result=40 08:28:01 Set A/D channel type result=40 08:28:01 Set A/D encoding result=40 08:28:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:01 Set channel filter=0.000000e+000 result=40 08:28:01 Config A/D Result=40 08:28:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:01 Get A/D filter: -9.255963e+061 result=40 08:28:01 Get A/D value=-858993460 result=40 08:28:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:01 Parameters OK 08:28:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:01 Set A/D data flow result=40 08:28:01 Set A/D channel type result=40 08:28:01 Set A/D encoding result=40 08:28:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:01 Set channel filter=0.000000e+000 result=40 08:28:01 Config A/D Result=40 08:28:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:01 Get A/D filter: -9.255963e+061 result=40 08:28:01 Get A/D value=-858993460 result=40 08:28:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:01 Aux= 08:28:01 Message to Camera, serial 268511 queued 08:28:09 Received message from Master: op=Shutter serial=268520 08:28:09 Shutter LASER close 08:28:09 Received message from Master: op=PointingHead serial=268524 08:28:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:28:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:28:09 Point started: ret=0 08:28:09 point_skyscan result=0 08:28:10 Check angles 08:28:10 SkyScan query 08:28:11 SkyScan query done: ret=0 az=90.165<-6011 ze=157.455<-1503 Statuses=0009 0009 08:28:11 Msec=0 True Az=90.165 Ze=157.455 Az status=0009 Ze status=0009 08:28:11 Check angles 08:28:11 SkyScan query 08:28:11 SkyScan query done: ret=0 az=72.705<-4847 ze=136.485<-2901 Statuses=0009 0009 08:28:11 Msec=750 True Az=72.705 Ze=136.485 Az status=0009 Ze status=0009 08:28:12 Check angles 08:28:12 SkyScan query 08:28:12 SkyScan query done: ret=0 az=55.23<-3682 ze=115.575<-4295 Statuses=0009 0009 08:28:12 Msec=1500 True Az=55.23 Ze=115.575 Az status=0009 Ze status=0009 08:28:12 Check angles 08:28:12 SkyScan query 08:28:13 SkyScan query done: ret=0 az=41.01<-2734 ze=94.605<-5693 Statuses=0009 0009 08:28:13 Msec=2250 True Az=41.01 Ze=94.605 Az status=0009 Ze status=0009 08:28:13 Check angles 08:28:13 SkyScan query 08:28:14 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 08:28:14 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 08:28:14 Check angles 08:28:14 SkyScan query 08:28:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 08:28:14 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 08:28:15 Check angles 08:28:15 SkyScan query 08:28:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:28:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:28:15 Message to Master queued w/err=0: serial=268524 error=0 08:28:20 Received message from Master: op=Filter serial=268525 08:28:20 Color wheel filter change from 0 to 0 08:28:20 FLIGetFilterPos err=0 currentPosition=0 08:28:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:20 Filter is already there-color wheel unchanged 08:28:20 Received message from Master: op=Shutter serial=268526 08:28:20 Shutter LASER close 08:28:21 Received message from Camera: op=State serial=268528 08:28:21 GetSingleValue result=40 Value=cccccccc 08:28:21 SkyScan query 08:28:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:28:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:21 Parameters OK 08:28:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:21 Set A/D data flow result=40 08:28:21 Set A/D channel type result=40 08:28:21 Set A/D encoding result=40 08:28:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:21 Set channel filter=0.000000e+000 result=40 08:28:21 Config A/D Result=40 08:28:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:21 Get A/D filter: -9.255963e+061 result=40 08:28:21 Get A/D value=-858993460 result=40 08:28:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:21 Parameters OK 08:28:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:21 Set A/D data flow result=40 08:28:21 Set A/D channel type result=40 08:28:21 Set A/D encoding result=40 08:28:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:21 Set channel filter=0.000000e+000 result=40 08:28:21 Config A/D Result=40 08:28:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:21 Get A/D filter: -9.255963e+061 result=40 08:28:21 Get A/D value=-858993460 result=40 08:28:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:21 Aux= 08:28:21 Message to Camera, serial 268528 queued 08:28:58 Received message from Master: op=PointingHead serial=268541 08:28:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:28:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:28:58 Point started: ret=0 08:28:58 point_skyscan result=0 08:28:59 Check angles 08:28:59 SkyScan query 08:29:00 SkyScan query done: ret=0 az=64.215<-4281 ze=66.525<-7565 Statuses=0009 0008 08:29:00 Msec=0 True Az=64.215 Ze=66.525 Az status=0009 Ze status=0008 08:29:00 Check angles 08:29:00 SkyScan query 08:29:00 SkyScan query done: ret=0 az=81.66<-5444 ze=66.525<-7565 Statuses=0009 0008 08:29:00 Msec=750 True Az=81.66 Ze=66.525 Az status=0009 Ze status=0008 08:29:01 Check angles 08:29:01 SkyScan query 08:29:01 SkyScan query done: ret=0 az=99.18<-6612 ze=66.495<-7567 Statuses=0009 0008 08:29:01 Msec=1500 True Az=99.18 Ze=66.495 Az status=0009 Ze status=0008 08:29:01 Check angles 08:29:01 SkyScan query 08:29:02 SkyScan query done: ret=0 az=116.655<-7777 ze=66.495<-7567 Statuses=0009 0008 08:29:02 Msec=2250 True Az=116.655 Ze=66.495 Az status=0009 Ze status=0008 08:29:02 Check angles 08:29:02 SkyScan query 08:29:03 SkyScan query done: ret=0 az=134.055<-8937 ze=66.495<-7567 Statuses=0009 0008 08:29:03 Msec=3000 True Az=134.055 Ze=66.495 Az status=0009 Ze status=0008 08:29:03 Check angles 08:29:03 SkyScan query 08:29:03 SkyScan query done: ret=0 az=151.575<-10105 ze=66.495<-7567 Statuses=0009 0008 08:29:03 Msec=3750 True Az=151.575 Ze=66.495 Az status=0009 Ze status=0008 08:29:04 Check angles 08:29:04 SkyScan query 08:29:04 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:29:04 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:29:04 Message to Master queued w/err=0: serial=268541 error=0 08:29:09 Received message from Master: op=Filter serial=268542 08:29:09 Color wheel filter change from 0 to 0 08:29:09 FLIGetFilterPos err=0 currentPosition=0 08:29:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:09 Filter is already there-color wheel unchanged 08:29:09 Received message from Master: op=Shutter serial=268543 08:29:09 Shutter LASER close 08:29:09 Received message from Camera: op=State serial=268545 08:29:09 GetSingleValue result=40 Value=cccccccc 08:29:09 SkyScan query 08:29:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:29:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:10 Parameters OK 08:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:10 Set A/D data flow result=40 08:29:10 Set A/D channel type result=40 08:29:10 Set A/D encoding result=40 08:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:10 Set channel filter=0.000000e+000 result=40 08:29:10 Config A/D Result=40 08:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:10 Get A/D filter: -9.255963e+061 result=40 08:29:10 Get A/D value=-858993460 result=40 08:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:10 Parameters OK 08:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:10 Set A/D data flow result=40 08:29:10 Set A/D channel type result=40 08:29:10 Set A/D encoding result=40 08:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:10 Set channel filter=0.000000e+000 result=40 08:29:10 Config A/D Result=40 08:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:10 Get A/D filter: -9.255963e+061 result=40 08:29:10 Get A/D value=-858993460 result=40 08:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:10 Aux= 08:29:10 Message to Camera, serial 268545 queued 08:29:47 Received message from Master: op=PointingHead serial=268558 08:29:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:29:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:29:47 Point started: ret=0 08:29:47 point_skyscan result=0 08:29:48 Check angles 08:29:48 SkyScan query 08:29:49 SkyScan query done: ret=0 az=135.03<-9002 ze=96.27<-5582 Statuses=0009 0009 08:29:49 Msec=0 True Az=135.03 Ze=96.27 Az status=0009 Ze status=0009 08:29:49 Check angles 08:29:49 SkyScan query 08:29:49 SkyScan query done: ret=0 az=130.995<-8733 ze=117.225<-4185 Statuses=0008 0009 08:29:49 Msec=750 True Az=130.995 Ze=117.225 Az status=0008 Ze status=0009 08:29:50 Check angles 08:29:50 SkyScan query 08:29:50 SkyScan query done: ret=0 az=130.98<-8732 ze=138.12<-2792 Statuses=0008 0009 08:29:50 Msec=1500 True Az=130.98 Ze=138.12 Az status=0008 Ze status=0009 08:29:50 Check angles 08:29:50 SkyScan query 08:29:51 SkyScan query done: ret=0 az=130.995<-8733 ze=159.12<-1392 Statuses=0008 0009 08:29:51 Msec=2250 True Az=130.995 Ze=159.12 Az status=0008 Ze status=0009 08:29:51 Check angles 08:29:51 SkyScan query 08:29:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.985<-23999 Statuses=0008 0009 08:29:52 Msec=3000 True Az=130.995 Ze=-179.985 Az status=0008 Ze status=0009 08:29:52 Check angles 08:29:52 SkyScan query 08:29:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.97<-22598 Statuses=0008 0009 08:29:52 Msec=3750 True Az=130.995 Ze=-158.97 Az status=0008 Ze status=0009 08:29:53 Check angles 08:29:53 SkyScan query 08:29:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 08:29:53 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 08:29:53 Check angles 08:29:53 SkyScan query 08:29:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:29:54 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:29:54 Message to Master queued w/err=0: serial=268558 error=0 08:29:59 Received message from Master: op=Filter serial=268559 08:29:59 Color wheel filter change from 0 to 0 08:29:59 FLIGetFilterPos err=0 currentPosition=0 08:29:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:59 Filter is already there-color wheel unchanged 08:29:59 Received message from Master: op=Shutter serial=268560 08:29:59 Shutter LASER close 08:29:59 Received message from Camera: op=State serial=268562 08:29:59 GetSingleValue result=40 Value=cccccccc 08:29:59 SkyScan query 08:30:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:30:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:00 Parameters OK 08:30:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:00 Set A/D data flow result=40 08:30:00 Set A/D channel type result=40 08:30:00 Set A/D encoding result=40 08:30:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:00 Set channel filter=0.000000e+000 result=40 08:30:00 Config A/D Result=40 08:30:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:00 Get A/D filter: -9.255963e+061 result=40 08:30:00 Get A/D value=-858993460 result=40 08:30:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:00 Parameters OK 08:30:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:00 Set A/D data flow result=40 08:30:00 Set A/D channel type result=40 08:30:00 Set A/D encoding result=40 08:30:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:00 Set channel filter=0.000000e+000 result=40 08:30:00 Config A/D Result=40 08:30:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:00 Get A/D filter: -9.255963e+061 result=40 08:30:00 Get A/D value=-858993460 result=40 08:30:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:00 Aux= 08:30:00 Message to Camera, serial 268562 queued 08:30:37 Received message from Master: op=PointingHead serial=268575 08:30:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:30:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:30:37 Point started: ret=0 08:30:37 point_skyscan result=0 08:30:38 Check angles 08:30:38 SkyScan query 08:30:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 08:30:38 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 08:30:38 Check angles 08:30:38 SkyScan query 08:30:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:30:39 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:30:39 Message to Master queued w/err=0: serial=268575 error=0 08:30:44 Received message from Master: op=Filter serial=268576 08:30:44 Color wheel filter change from 0 to 0 08:30:44 FLIGetFilterPos err=0 currentPosition=0 08:30:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:44 Filter is already there-color wheel unchanged 08:30:44 Received message from Master: op=Shutter serial=268577 08:30:44 Shutter LASER open 08:30:44 Received message from Camera: op=State serial=268579 08:30:44 GetSingleValue result=40 Value=cccccccc 08:30:44 SkyScan query 08:30:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:30:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:45 Parameters OK 08:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:45 Set A/D data flow result=40 08:30:45 Set A/D channel type result=40 08:30:45 Set A/D encoding result=40 08:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:45 Set channel filter=0.000000e+000 result=40 08:30:45 Config A/D Result=40 08:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:45 Get A/D filter: -9.255963e+061 result=40 08:30:45 Get A/D value=-858993460 result=40 08:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:45 Parameters OK 08:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:45 Set A/D data flow result=40 08:30:45 Set A/D channel type result=40 08:30:45 Set A/D encoding result=40 08:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:45 Set channel filter=0.000000e+000 result=40 08:30:45 Config A/D Result=40 08:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:45 Get A/D filter: -9.255963e+061 result=40 08:30:45 Get A/D value=-858993460 result=40 08:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:45 Aux= 08:30:45 Message to Camera, serial 268579 queued 08:30:53 Received message from Master: op=Shutter serial=268589 08:30:53 Shutter LASER close 08:30:54 Received message from Master: op=PointingHead serial=268593 08:30:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:30:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:30:54 Point started: ret=0 08:30:54 point_skyscan result=0 08:30:55 Check angles 08:30:55 SkyScan query 08:30:56 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.55<-21570 Statuses=0009 0009 08:30:56 Msec=0 True Az=135.705 Ze=-143.55 Az status=0009 Ze status=0009 08:30:56 Check angles 08:30:56 SkyScan query 08:30:56 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.16<-20144 Statuses=0009 0009 08:30:56 Msec=750 True Az=153.57 Ze=-122.16 Az status=0009 Ze status=0009 08:30:56 Check angles 08:30:56 SkyScan query 08:30:57 SkyScan query done: ret=0 az=171.15<-11410 ze=-101.265<-18751 Statuses=0009 0009 08:30:57 Msec=1500 True Az=171.15 Ze=-101.265 Az status=0009 Ze status=0009 08:30:57 Check angles 08:30:57 SkyScan query 08:30:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 08:30:58 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 08:30:58 Check angles 08:30:58 SkyScan query 08:30:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.35<-15890 Statuses=0008 0009 08:30:59 Msec=3000 True Az=176.01 Ze=-58.35 Az status=0008 Ze status=0009 08:30:59 Check angles 08:30:59 SkyScan query 08:30:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:30:59 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:30:59 Message to Master queued w/err=0: serial=268593 error=0 08:31:04 Received message from Master: op=Filter serial=268594 08:31:04 Color wheel filter change from 0 to 0 08:31:04 FLIGetFilterPos err=0 currentPosition=0 08:31:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:04 Filter is already there-color wheel unchanged 08:31:05 Received message from Master: op=Shutter serial=268595 08:31:05 Shutter LASER close 08:31:05 Received message from Camera: op=State serial=268597 08:31:05 GetSingleValue result=40 Value=cccccccc 08:31:05 SkyScan query 08:31:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:31:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:05 Parameters OK 08:31:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:05 Set A/D data flow result=40 08:31:05 Set A/D channel type result=40 08:31:05 Set A/D encoding result=40 08:31:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:05 Set channel filter=0.000000e+000 result=40 08:31:05 Config A/D Result=40 08:31:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:05 Get A/D filter: -9.255963e+061 result=40 08:31:05 Get A/D value=-858993460 result=40 08:31:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:05 Parameters OK 08:31:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:05 Set A/D data flow result=40 08:31:05 Set A/D channel type result=40 08:31:05 Set A/D encoding result=40 08:31:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:05 Set channel filter=0.000000e+000 result=40 08:31:05 Config A/D Result=40 08:31:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:05 Get A/D filter: -9.255963e+061 result=40 08:31:05 Get A/D value=-858993460 result=40 08:31:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:05 Aux= 08:31:05 Message to Camera, serial 268597 queued 08:31:42 Received message from Master: op=PointingHead serial=268610 08:31:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:31:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:31:42 Point started: ret=0 08:31:42 point_skyscan result=0 08:31:43 Check angles 08:31:43 SkyScan query 08:31:44 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.005<-13467 Statuses=0009 0009 08:31:44 Msec=0 True Az=153.195 Ze=-22.005 Az status=0009 Ze status=0009 08:31:44 Check angles 08:31:44 SkyScan query 08:31:45 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.975<-12065 Statuses=0009 0009 08:31:45 Msec=750 True Az=135.705 Ze=-0.975 Az status=0009 Ze status=0009 08:31:45 Check angles 08:31:45 SkyScan query 08:31:45 SkyScan query done: ret=0 az=118.2<-7880 ze=19.905<-10673 Statuses=0009 0009 08:31:45 Msec=1500 True Az=118.2 Ze=19.905 Az status=0009 Ze status=0009 08:31:45 Check angles 08:31:45 SkyScan query 08:31:46 SkyScan query done: ret=0 az=100.8<-6720 ze=40.98<-9268 Statuses=0009 0009 08:31:46 Msec=2250 True Az=100.8 Ze=40.98 Az status=0009 Ze status=0009 08:31:46 Check angles 08:31:46 SkyScan query 08:31:47 SkyScan query done: ret=0 az=85.965<-5731 ze=51.57<-8562 Statuses=0009 0008 08:31:47 Msec=3000 True Az=85.965 Ze=51.57 Az status=0009 Ze status=0008 08:31:47 Check angles 08:31:47 SkyScan query 08:31:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:31:48 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:31:48 Message to Master queued w/err=0: serial=268610 error=0 08:31:53 Received message from Master: op=Filter serial=268611 08:31:53 Color wheel filter change from 0 to 0 08:31:53 FLIGetFilterPos err=0 currentPosition=0 08:31:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:53 Filter is already there-color wheel unchanged 08:31:53 Received message from Master: op=Shutter serial=268612 08:31:53 Shutter LASER close 08:31:53 Received message from Camera: op=State serial=268614 08:31:53 GetSingleValue result=40 Value=cccccccc 08:31:53 SkyScan query 08:31:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:31:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:53 Parameters OK 08:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:53 Set A/D data flow result=40 08:31:53 Set A/D channel type result=40 08:31:53 Set A/D encoding result=40 08:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:53 Set channel filter=0.000000e+000 result=40 08:31:53 Config A/D Result=40 08:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:53 Get A/D filter: -9.255963e+061 result=40 08:31:53 Get A/D value=-858993460 result=40 08:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:53 Parameters OK 08:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:53 Set A/D data flow result=40 08:31:53 Set A/D channel type result=40 08:31:53 Set A/D encoding result=40 08:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:53 Set channel filter=0.000000e+000 result=40 08:31:53 Config A/D Result=40 08:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:53 Get A/D filter: -9.255963e+061 result=40 08:31:53 Get A/D value=-858993460 result=40 08:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:53 Aux= 08:31:53 Message to Camera, serial 268614 queued 08:32:30 Received message from Master: op=PointingHead serial=268627 08:32:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:32:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:32:31 Point started: ret=0 08:32:31 point_skyscan result=0 08:32:31 Check angles 08:32:31 SkyScan query 08:32:32 SkyScan query done: ret=0 az=85.995<-5733 ze=21.825<-10545 Statuses=0008 0009 08:32:32 Msec=0 True Az=85.995 Ze=21.825 Az status=0008 Ze status=0009 08:32:32 Check angles 08:32:32 SkyScan query 08:32:33 SkyScan query done: ret=0 az=86.01<-5734 ze=0.495<-11967 Statuses=0008 0009 08:32:33 Msec=750 True Az=86.01 Ze=0.495 Az status=0008 Ze status=0009 08:32:33 Check angles 08:32:33 SkyScan query 08:32:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.535<-13369 Statuses=0008 0009 08:32:34 Msec=1500 True Az=85.995 Ze=-20.535 Az status=0008 Ze status=0009 08:32:34 Check angles 08:32:34 SkyScan query 08:32:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.43<-14762 Statuses=0008 0009 08:32:34 Msec=2250 True Az=85.995 Ze=-41.43 Az status=0008 Ze status=0009 08:32:34 Check angles 08:32:34 SkyScan query 08:32:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:32:35 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:32:35 Message to Master queued w/err=0: serial=268627 error=0 08:32:40 Received message from Master: op=Filter serial=268628 08:32:40 Color wheel filter change from 0 to 0 08:32:40 FLIGetFilterPos err=0 currentPosition=0 08:32:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:40 Filter is already there-color wheel unchanged 08:32:40 Received message from Master: op=Shutter serial=268629 08:32:40 Shutter LASER close 08:32:40 Received message from Camera: op=State serial=268631 08:32:40 GetSingleValue result=40 Value=cccccccc 08:32:40 SkyScan query 08:32:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:32:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:41 Parameters OK 08:32:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:41 Set A/D data flow result=40 08:32:41 Set A/D channel type result=40 08:32:41 Set A/D encoding result=40 08:32:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:41 Set channel filter=0.000000e+000 result=40 08:32:41 Config A/D Result=40 08:32:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:41 Get A/D filter: -9.255963e+061 result=40 08:32:41 Get A/D value=-858993460 result=40 08:32:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:41 Parameters OK 08:32:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:41 Set A/D data flow result=40 08:32:41 Set A/D channel type result=40 08:32:41 Set A/D encoding result=40 08:32:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:41 Set channel filter=0.000000e+000 result=40 08:32:41 Config A/D Result=40 08:32:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:41 Get A/D filter: -9.255963e+061 result=40 08:32:41 Get A/D value=-858993460 result=40 08:32:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:41 Aux= 08:32:41 Message to Camera, serial 268631 queued 08:33:18 Received message from Master: op=PointingHead serial=268644 08:33:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:33:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:33:18 Point started: ret=0 08:33:18 point_skyscan result=0 08:33:19 Check angles 08:33:19 SkyScan query 08:33:19 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.585<-17439 Statuses=0009 0009 08:33:19 Msec=0 True Az=109.215 Ze=-81.585 Az status=0009 Ze status=0009 08:33:20 Check angles 08:33:20 SkyScan query 08:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 08:33:20 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 08:33:20 Check angles 08:33:20 SkyScan query 08:33:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 08:33:21 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 08:33:21 Check angles 08:33:21 SkyScan query 08:33:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 08:33:22 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 08:33:22 Check angles 08:33:22 SkyScan query 08:33:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 08:33:22 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 08:33:23 Check angles 08:33:23 SkyScan query 08:33:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:33:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:33:23 Message to Master queued w/err=0: serial=268644 error=0 08:33:28 Received message from Master: op=Filter serial=268645 08:33:28 Color wheel filter change from 0 to 0 08:33:28 FLIGetFilterPos err=0 currentPosition=0 08:33:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:28 Filter is already there-color wheel unchanged 08:33:28 Received message from Master: op=Shutter serial=268646 08:33:28 Shutter LASER open 08:33:28 Received message from Camera: op=State serial=268648 08:33:28 GetSingleValue result=40 Value=cccccccc 08:33:28 SkyScan query 08:33:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:33:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:29 Parameters OK 08:33:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:29 Set A/D data flow result=40 08:33:29 Set A/D channel type result=40 08:33:29 Set A/D encoding result=40 08:33:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:29 Set channel filter=0.000000e+000 result=40 08:33:29 Config A/D Result=40 08:33:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:29 Get A/D filter: -9.255963e+061 result=40 08:33:29 Get A/D value=-858993460 result=40 08:33:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:29 Parameters OK 08:33:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:29 Set A/D data flow result=40 08:33:29 Set A/D channel type result=40 08:33:29 Set A/D encoding result=40 08:33:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:29 Set channel filter=0.000000e+000 result=40 08:33:29 Config A/D Result=40 08:33:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:29 Get A/D filter: -9.255963e+061 result=40 08:33:29 Get A/D value=-858993460 result=40 08:33:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:29 Aux= 08:33:29 Message to Camera, serial 268648 queued 08:33:37 Received message from Master: op=Shutter serial=268658 08:33:37 Shutter LASER close 08:33:38 Received message from Master: op=PointingHead serial=268662 08:33:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:33:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:33:38 Point started: ret=0 08:33:38 point_skyscan result=0 08:33:39 Check angles 08:33:39 SkyScan query 08:33:40 SkyScan query done: ret=0 az=90.03<-6002 ze=157.305<-1513 Statuses=0009 0009 08:33:40 Msec=0 True Az=90.03 Ze=157.305 Az status=0009 Ze status=0009 08:33:40 Check angles 08:33:40 SkyScan query 08:33:40 SkyScan query done: ret=0 az=72.555<-4837 ze=136.365<-2909 Statuses=0009 0009 08:33:40 Msec=750 True Az=72.555 Ze=136.365 Az status=0009 Ze status=0009 08:33:41 Check angles 08:33:41 SkyScan query 08:33:41 SkyScan query done: ret=0 az=55.155<-3677 ze=115.425<-4305 Statuses=0009 0009 08:33:41 Msec=1500 True Az=55.155 Ze=115.425 Az status=0009 Ze status=0009 08:33:41 Check angles 08:33:41 SkyScan query 08:33:42 SkyScan query done: ret=0 az=40.995<-2733 ze=94.02<-5732 Statuses=0009 0009 08:33:42 Msec=2250 True Az=40.995 Ze=94.02 Az status=0009 Ze status=0009 08:33:42 Check angles 08:33:42 SkyScan query 08:33:43 SkyScan query done: ret=0 az=40.995<-2733 ze=73.005<-7133 Statuses=0008 0009 08:33:43 Msec=3000 True Az=40.995 Ze=73.005 Az status=0008 Ze status=0009 08:33:43 Check angles 08:33:43 SkyScan query 08:33:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 08:33:43 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 08:33:44 Check angles 08:33:44 SkyScan query 08:33:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:33:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:33:44 Message to Master queued w/err=0: serial=268662 error=0 08:33:49 Received message from Master: op=Filter serial=268663 08:33:49 Color wheel filter change from 0 to 0 08:33:49 FLIGetFilterPos err=0 currentPosition=0 08:33:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:49 Filter is already there-color wheel unchanged 08:33:49 Received message from Master: op=Shutter serial=268664 08:33:49 Shutter LASER close 08:33:49 Received message from Camera: op=State serial=268666 08:33:49 GetSingleValue result=40 Value=cccccccc 08:33:49 SkyScan query 08:33:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:33:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:50 Parameters OK 08:33:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:50 Set A/D data flow result=40 08:33:50 Set A/D channel type result=40 08:33:50 Set A/D encoding result=40 08:33:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:50 Set channel filter=0.000000e+000 result=40 08:33:50 Config A/D Result=40 08:33:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:50 Get A/D filter: -9.255963e+061 result=40 08:33:50 Get A/D value=-858993460 result=40 08:33:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:50 Parameters OK 08:33:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:50 Set A/D data flow result=40 08:33:50 Set A/D channel type result=40 08:33:50 Set A/D encoding result=40 08:33:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:50 Set channel filter=0.000000e+000 result=40 08:33:50 Config A/D Result=40 08:33:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:50 Get A/D filter: -9.255963e+061 result=40 08:33:50 Get A/D value=-858993460 result=40 08:33:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:50 Aux= 08:33:50 Message to Camera, serial 268666 queued 08:34:27 Received message from Master: op=PointingHead serial=268679 08:34:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:34:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:34:27 Point started: ret=0 08:34:27 point_skyscan result=0 08:34:28 Check angles 08:34:28 SkyScan query 08:34:29 SkyScan query done: ret=0 az=63.93<-4262 ze=66.525<-7565 Statuses=0009 0008 08:34:29 Msec=0 True Az=63.93 Ze=66.525 Az status=0009 Ze status=0008 08:34:29 Check angles 08:34:29 SkyScan query 08:34:29 SkyScan query done: ret=0 az=81.78<-5452 ze=66.51<-7566 Statuses=0009 0008 08:34:29 Msec=750 True Az=81.78 Ze=66.51 Az status=0009 Ze status=0008 08:34:29 Check angles 08:34:29 SkyScan query 08:34:30 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 08:34:30 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 08:34:30 Check angles 08:34:30 SkyScan query 08:34:31 SkyScan query done: ret=0 az=117.225<-7815 ze=66.495<-7567 Statuses=0009 0008 08:34:31 Msec=2250 True Az=117.225 Ze=66.495 Az status=0009 Ze status=0008 08:34:31 Check angles 08:34:31 SkyScan query 08:34:32 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 08:34:32 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 08:34:32 Check angles 08:34:32 SkyScan query 08:34:32 SkyScan query done: ret=0 az=151.95<-10130 ze=66.495<-7567 Statuses=0009 0008 08:34:32 Msec=3750 True Az=151.95 Ze=66.495 Az status=0009 Ze status=0008 08:34:32 Check angles 08:34:32 SkyScan query 08:34:33 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:34:33 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:34:33 Message to Master queued w/err=0: serial=268679 error=0 08:34:38 Received message from Master: op=Filter serial=268680 08:34:38 Color wheel filter change from 0 to 0 08:34:38 FLIGetFilterPos err=0 currentPosition=0 08:34:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:38 Filter is already there-color wheel unchanged 08:34:38 Received message from Master: op=Shutter serial=268681 08:34:38 Shutter LASER close 08:34:38 Received message from Camera: op=State serial=268683 08:34:38 GetSingleValue result=40 Value=cccccccc 08:34:38 SkyScan query 08:34:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:34:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:39 Parameters OK 08:34:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:39 Set A/D data flow result=40 08:34:39 Set A/D channel type result=40 08:34:39 Set A/D encoding result=40 08:34:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:39 Set channel filter=0.000000e+000 result=40 08:34:39 Config A/D Result=40 08:34:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:39 Get A/D filter: -9.255963e+061 result=40 08:34:39 Get A/D value=-858993460 result=40 08:34:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:39 Parameters OK 08:34:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:39 Set A/D data flow result=40 08:34:39 Set A/D channel type result=40 08:34:39 Set A/D encoding result=40 08:34:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:39 Set channel filter=0.000000e+000 result=40 08:34:39 Config A/D Result=40 08:34:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:39 Get A/D filter: -9.255963e+061 result=40 08:34:39 Get A/D value=-858993460 result=40 08:34:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:39 Aux= 08:34:39 Message to Camera, serial 268683 queued 08:35:16 Received message from Master: op=PointingHead serial=268696 08:35:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:35:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:35:16 Point started: ret=0 [UTC 2018-12-19 08:35:16] 08:35:16 point_skyscan result=0 08:35:17 Check angles 08:35:17 SkyScan query 08:35:18 SkyScan query done: ret=0 az=133.215<-8881 ze=98.49<-5434 Statuses=0009 0009 08:35:18 Msec=0 True Az=133.215 Ze=98.49 Az status=0009 Ze status=0009 08:35:18 Check angles 08:35:18 SkyScan query 08:35:18 SkyScan query done: ret=0 az=130.995<-8733 ze=119.43<-4038 Statuses=0008 0009 08:35:18 Msec=750 True Az=130.995 Ze=119.43 Az status=0008 Ze status=0009 08:35:18 Check angles 08:35:18 SkyScan query 08:35:19 SkyScan query done: ret=0 az=130.98<-8732 ze=140.37<-2642 Statuses=0008 0009 08:35:19 Msec=1500 True Az=130.98 Ze=140.37 Az status=0008 Ze status=0009 08:35:19 Check angles 08:35:19 SkyScan query 08:35:20 SkyScan query done: ret=0 az=130.995<-8733 ze=161.34<-1244 Statuses=0008 0009 08:35:20 Msec=2250 True Az=130.995 Ze=161.34 Az status=0008 Ze status=0009 08:35:20 Check angles 08:35:20 SkyScan query 08:35:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-177.75<-23850 Statuses=0008 0009 08:35:21 Msec=3000 True Az=130.995 Ze=-177.75 Az status=0008 Ze status=0009 08:35:21 Check angles 08:35:21 SkyScan query 08:35:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-156.345<-22423 Statuses=0008 0009 08:35:21 Msec=3750 True Az=130.995 Ze=-156.345 Az status=0008 Ze status=0009 08:35:21 Check angles 08:35:21 SkyScan query 08:35:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 08:35:22 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 08:35:22 Check angles 08:35:22 SkyScan query 08:35:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:35:23 Msec=5250 True Az=130.995 Ze=-141.495 Az status=0008 Ze status=0008 08:35:23 Message to Master queued w/err=0: serial=268696 error=0 08:35:28 Received message from Master: op=Filter serial=268697 08:35:28 Color wheel filter change from 0 to 0 08:35:28 FLIGetFilterPos err=0 currentPosition=0 08:35:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:28 Filter is already there-color wheel unchanged 08:35:28 Received message from Master: op=Shutter serial=268698 08:35:28 Shutter LASER close 08:35:28 Received message from Camera: op=State serial=268700 08:35:28 GetSingleValue result=40 Value=cccccccc 08:35:28 SkyScan query 08:35:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:35:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:29 Parameters OK 08:35:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:29 Set A/D data flow result=40 08:35:29 Set A/D channel type result=40 08:35:29 Set A/D encoding result=40 08:35:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:29 Set channel filter=0.000000e+000 result=40 08:35:29 Config A/D Result=40 08:35:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:29 Get A/D filter: -9.255963e+061 result=40 08:35:29 Get A/D value=-858993460 result=40 08:35:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:29 Parameters OK 08:35:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:29 Set A/D data flow result=40 08:35:29 Set A/D channel type result=40 08:35:29 Set A/D encoding result=40 08:35:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:29 Set channel filter=0.000000e+000 result=40 08:35:29 Config A/D Result=40 08:35:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:29 Get A/D filter: -9.255963e+061 result=40 08:35:29 Get A/D value=-858993460 result=40 08:35:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:29 Aux= 08:35:29 Message to Camera, serial 268700 queued [UTC 2018-12-19 08:35:52] 08:36:05 Received message from Master: op=PointingHead serial=268713 08:36:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:36:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:36:06 Point started: ret=0 08:36:06 point_skyscan result=0 08:36:07 Check angles 08:36:07 SkyScan query 08:36:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 08:36:07 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 08:36:07 Check angles 08:36:07 SkyScan query 08:36:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:36:08 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:36:08 Message to Master queued w/err=0: serial=268713 error=0 08:36:13 Received message from Master: op=Filter serial=268714 08:36:13 Color wheel filter change from 0 to 0 08:36:13 FLIGetFilterPos err=0 currentPosition=0 08:36:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:13 Filter is already there-color wheel unchanged 08:36:13 Received message from Master: op=Shutter serial=268715 08:36:13 Shutter LASER open 08:36:13 Received message from Camera: op=State serial=268717 08:36:13 GetSingleValue result=40 Value=cccccccc 08:36:13 SkyScan query 08:36:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:36:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:14 Parameters OK 08:36:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:14 Set A/D data flow result=40 08:36:14 Set A/D channel type result=40 08:36:14 Set A/D encoding result=40 08:36:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:14 Set channel filter=0.000000e+000 result=40 08:36:14 Config A/D Result=40 08:36:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:14 Get A/D filter: -9.255963e+061 result=40 08:36:14 Get A/D value=-858993460 result=40 08:36:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:14 Parameters OK 08:36:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:14 Set A/D data flow result=40 08:36:14 Set A/D channel type result=40 08:36:14 Set A/D encoding result=40 08:36:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:14 Set channel filter=0.000000e+000 result=40 08:36:14 Config A/D Result=40 08:36:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:14 Get A/D filter: -9.255963e+061 result=40 08:36:14 Get A/D value=-858993460 result=40 08:36:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:14 Aux= 08:36:14 Message to Camera, serial 268717 queued 08:36:22 Received message from Master: op=Shutter serial=268727 08:36:22 Shutter LASER close 08:36:23 Received message from Master: op=PointingHead serial=268731 08:36:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:36:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:36:23 Point started: ret=0 08:36:23 point_skyscan result=0 08:36:24 Check angles 08:36:24 SkyScan query 08:36:25 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.385<-21559 Statuses=0009 0009 08:36:25 Msec=0 True Az=135.78 Ze=-143.385 Az status=0009 Ze status=0009 08:36:25 Check angles 08:36:25 SkyScan query 08:36:25 SkyScan query done: ret=0 az=153.645<-10243 ze=-121.98<-20132 Statuses=0009 0009 08:36:25 Msec=750 True Az=153.645 Ze=-121.98 Az status=0009 Ze status=0009 08:36:26 Check angles 08:36:26 SkyScan query 08:36:26 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.025<-18735 Statuses=0009 0009 08:36:26 Msec=1500 True Az=171.135 Ze=-101.025 Az status=0009 Ze status=0009 08:36:26 Check angles 08:36:26 SkyScan query 08:36:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.1<-17340 Statuses=0008 0009 08:36:27 Msec=2250 True Az=176.01 Ze=-80.1 Az status=0008 Ze status=0009 08:36:27 Check angles 08:36:27 SkyScan query 08:36:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.115<-15941 Statuses=0008 0009 08:36:28 Msec=3000 True Az=176.01 Ze=-59.115 Az status=0008 Ze status=0009 08:36:28 Check angles 08:36:28 SkyScan query 08:36:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:36:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:36:28 Message to Master queued w/err=0: serial=268731 error=0 08:36:33 Received message from Master: op=Filter serial=268732 08:36:33 Color wheel filter change from 0 to 0 08:36:33 FLIGetFilterPos err=0 currentPosition=0 08:36:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:33 Filter is already there-color wheel unchanged 08:36:34 Received message from Master: op=Shutter serial=268733 08:36:34 Shutter LASER close 08:36:34 Received message from Camera: op=State serial=268735 08:36:34 GetSingleValue result=40 Value=cccccccc 08:36:34 SkyScan query 08:36:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:36:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:34 Parameters OK 08:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:34 Set A/D data flow result=40 08:36:34 Set A/D channel type result=40 08:36:34 Set A/D encoding result=40 08:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:34 Set channel filter=0.000000e+000 result=40 08:36:34 Config A/D Result=40 08:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:34 Get A/D filter: -9.255963e+061 result=40 08:36:34 Get A/D value=-858993460 result=40 08:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:34 Parameters OK 08:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:34 Set A/D data flow result=40 08:36:34 Set A/D channel type result=40 08:36:34 Set A/D encoding result=40 08:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:34 Set channel filter=0.000000e+000 result=40 08:36:34 Config A/D Result=40 08:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:34 Get A/D filter: -9.255963e+061 result=40 08:36:34 Get A/D value=-858993460 result=40 08:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:34 Aux= 08:36:34 Message to Camera, serial 268735 queued 08:37:11 Received message from Master: op=PointingHead serial=268748 08:37:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:37:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:37:11 Point started: ret=0 08:37:11 point_skyscan result=0 08:37:12 Check angles 08:37:12 SkyScan query 08:37:13 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.855<-13457 Statuses=0009 0009 08:37:13 Msec=0 True Az=153.12 Ze=-21.855 Az status=0009 Ze status=0009 08:37:13 Check angles 08:37:13 SkyScan query 08:37:14 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.81<-12054 Statuses=0009 0009 08:37:14 Msec=750 True Az=135.585 Ze=-0.81 Az status=0009 Ze status=0009 08:37:14 Check angles 08:37:14 SkyScan query 08:37:14 SkyScan query done: ret=0 az=117.66<-7844 ze=20.55<-10630 Statuses=0009 0009 08:37:14 Msec=1500 True Az=117.66 Ze=20.55 Az status=0009 Ze status=0009 08:37:15 Check angles 08:37:15 SkyScan query 08:37:15 SkyScan query done: ret=0 az=100.32<-6688 ze=41.52<-9232 Statuses=0009 0009 08:37:15 Msec=2250 True Az=100.32 Ze=41.52 Az status=0009 Ze status=0009 08:37:15 Check angles 08:37:15 SkyScan query 08:37:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 08:37:16 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 08:37:16 Check angles 08:37:16 SkyScan query 08:37:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:37:17 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:37:17 Message to Master queued w/err=0: serial=268748 error=0 08:37:22 Received message from Master: op=Filter serial=268749 08:37:22 Color wheel filter change from 0 to 0 08:37:22 FLIGetFilterPos err=0 currentPosition=0 08:37:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:22 Filter is already there-color wheel unchanged 08:37:22 Received message from Master: op=Shutter serial=268750 08:37:22 Shutter LASER close 08:37:22 Received message from Camera: op=State serial=268752 08:37:22 GetSingleValue result=40 Value=cccccccc 08:37:22 SkyScan query 08:37:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:37:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:22 Parameters OK 08:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:22 Set A/D data flow result=40 08:37:22 Set A/D channel type result=40 08:37:22 Set A/D encoding result=40 08:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:22 Set channel filter=0.000000e+000 result=40 08:37:22 Config A/D Result=40 08:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:22 Get A/D filter: -9.255963e+061 result=40 08:37:22 Get A/D value=-858993460 result=40 08:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:22 Parameters OK 08:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:22 Set A/D data flow result=40 08:37:22 Set A/D channel type result=40 08:37:22 Set A/D encoding result=40 08:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:22 Set channel filter=0.000000e+000 result=40 08:37:22 Config A/D Result=40 08:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:22 Get A/D filter: -9.255963e+061 result=40 08:37:22 Get A/D value=-858993460 result=40 08:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:22 Aux= 08:37:22 Message to Camera, serial 268752 queued 08:37:59 Received message from Master: op=PointingHead serial=268765 08:37:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:37:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:38:00 Point started: ret=0 08:38:00 point_skyscan result=0 08:38:00 Check angles 08:38:00 SkyScan query 08:38:01 SkyScan query done: ret=0 az=85.995<-5733 ze=21.66<-10556 Statuses=0008 0009 08:38:01 Msec=0 True Az=85.995 Ze=21.66 Az status=0008 Ze status=0009 08:38:01 Check angles 08:38:01 SkyScan query 08:38:02 SkyScan query done: ret=0 az=85.995<-5733 ze=0.81<-11946 Statuses=0008 0009 08:38:02 Msec=750 True Az=85.995 Ze=0.81 Az status=0008 Ze status=0009 08:38:02 Check angles 08:38:02 SkyScan query 08:38:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.655<-13377 Statuses=0008 0009 08:38:03 Msec=1500 True Az=85.995 Ze=-20.655 Az status=0008 Ze status=0009 08:38:03 Check angles 08:38:03 SkyScan query 08:38:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.58<-14772 Statuses=0008 0009 08:38:03 Msec=2250 True Az=85.995 Ze=-41.58 Az status=0008 Ze status=0009 08:38:03 Check angles 08:38:03 SkyScan query 08:38:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:38:04 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:38:04 Message to Master queued w/err=0: serial=268765 error=0 08:38:09 Received message from Master: op=Filter serial=268766 08:38:09 Color wheel filter change from 0 to 0 08:38:09 FLIGetFilterPos err=0 currentPosition=0 08:38:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:09 Filter is already there-color wheel unchanged 08:38:09 Received message from Master: op=Shutter serial=268767 08:38:09 Shutter LASER close 08:38:09 Received message from Camera: op=State serial=268769 08:38:09 GetSingleValue result=40 Value=cccccccc 08:38:09 SkyScan query 08:38:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:38:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:10 Parameters OK 08:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:10 Set A/D data flow result=40 08:38:10 Set A/D channel type result=40 08:38:10 Set A/D encoding result=40 08:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:10 Set channel filter=0.000000e+000 result=40 08:38:10 Config A/D Result=40 08:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:10 Get A/D filter: -9.255963e+061 result=40 08:38:10 Get A/D value=-858993460 result=40 08:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:10 Parameters OK 08:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:10 Set A/D data flow result=40 08:38:10 Set A/D channel type result=40 08:38:10 Set A/D encoding result=40 08:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:10 Set channel filter=0.000000e+000 result=40 08:38:10 Config A/D Result=40 08:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:10 Get A/D filter: -9.255963e+061 result=40 08:38:10 Get A/D value=-858993460 result=40 08:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:10 Aux= 08:38:10 Message to Camera, serial 268769 queued 08:38:47 Received message from Master: op=PointingHead serial=268782 08:38:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:38:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:38:47 Point started: ret=0 08:38:47 point_skyscan result=0 08:38:48 Check angles 08:38:48 SkyScan query 08:38:48 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.21<-17414 Statuses=0009 0009 08:38:48 Msec=0 True Az=108.975 Ze=-81.21 Az status=0009 Ze status=0009 08:38:49 Check angles 08:38:49 SkyScan query 08:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 08:38:49 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 08:38:49 Check angles 08:38:49 SkyScan query 08:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.12<-20208 Statuses=0008 0009 08:38:50 Msec=1500 True Az=112.995 Ze=-123.12 Az status=0008 Ze status=0009 08:38:50 Check angles 08:38:50 SkyScan query 08:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.06<-21604 Statuses=0008 0009 08:38:51 Msec=2250 True Az=112.995 Ze=-144.06 Az status=0008 Ze status=0009 08:38:51 Check angles 08:38:51 SkyScan query 08:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.03<-23002 Statuses=0008 0009 08:38:51 Msec=3000 True Az=112.995 Ze=-165.03 Az status=0008 Ze status=0009 08:38:52 Check angles 08:38:52 SkyScan query 08:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:38:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:38:52 Message to Master queued w/err=0: serial=268782 error=0 08:38:57 Received message from Master: op=Filter serial=268783 08:38:57 Color wheel filter change from 0 to 0 08:38:57 FLIGetFilterPos err=0 currentPosition=0 08:38:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:57 Filter is already there-color wheel unchanged 08:38:57 Received message from Master: op=Shutter serial=268784 08:38:57 Shutter LASER open 08:38:57 Received message from Camera: op=State serial=268786 08:38:57 GetSingleValue result=40 Value=cccccccc 08:38:57 SkyScan query 08:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:38:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:58 Parameters OK 08:38:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:58 Set A/D data flow result=40 08:38:58 Set A/D channel type result=40 08:38:58 Set A/D encoding result=40 08:38:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:58 Set channel filter=0.000000e+000 result=40 08:38:58 Config A/D Result=40 08:38:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:58 Get A/D filter: -9.255963e+061 result=40 08:38:58 Get A/D value=-858993460 result=40 08:38:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:58 Parameters OK 08:38:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:58 Set A/D data flow result=40 08:38:58 Set A/D channel type result=40 08:38:58 Set A/D encoding result=40 08:38:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:58 Set channel filter=0.000000e+000 result=40 08:38:58 Config A/D Result=40 08:38:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:58 Get A/D filter: -9.255963e+061 result=40 08:38:58 Get A/D value=-858993460 result=40 08:38:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:58 Aux= 08:38:58 Message to Camera, serial 268786 queued 08:39:06 Received message from Master: op=Shutter serial=268796 08:39:06 Shutter LASER close 08:39:07 Received message from Master: op=PointingHead serial=268800 08:39:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:39:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:39:07 Point started: ret=0 08:39:07 point_skyscan result=0 08:39:08 Check angles 08:39:08 SkyScan query 08:39:09 SkyScan query done: ret=0 az=89.82<-5988 ze=157.14<-1524 Statuses=0009 0009 08:39:09 Msec=0 True Az=89.82 Ze=157.14 Az status=0009 Ze status=0009 08:39:09 Check angles 08:39:09 SkyScan query 08:39:09 SkyScan query done: ret=0 az=71.985<-4799 ze=135.795<-2947 Statuses=0009 0009 08:39:09 Msec=750 True Az=71.985 Ze=135.795 Az status=0009 Ze status=0009 08:39:10 Check angles 08:39:10 SkyScan query 08:39:10 SkyScan query done: ret=0 az=54.525<-3635 ze=114.765<-4349 Statuses=0009 0009 08:39:10 Msec=1500 True Az=54.525 Ze=114.765 Az status=0009 Ze status=0009 08:39:10 Check angles 08:39:10 SkyScan query 08:39:11 SkyScan query done: ret=0 az=40.98<-2732 ze=93.855<-5743 Statuses=0009 0009 08:39:11 Msec=2250 True Az=40.98 Ze=93.855 Az status=0009 Ze status=0009 08:39:11 Check angles 08:39:11 SkyScan query 08:39:12 SkyScan query done: ret=0 az=40.995<-2733 ze=72.45<-7170 Statuses=0008 0009 08:39:12 Msec=3000 True Az=40.995 Ze=72.45 Az status=0008 Ze status=0009 08:39:12 Check angles 08:39:12 SkyScan query 08:39:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 08:39:12 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 08:39:13 Check angles 08:39:13 SkyScan query 08:39:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:39:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:39:13 Message to Master queued w/err=0: serial=268800 error=0 08:39:18 Received message from Master: op=Filter serial=268801 08:39:18 Color wheel filter change from 0 to 0 08:39:18 FLIGetFilterPos err=0 currentPosition=0 08:39:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:18 Filter is already there-color wheel unchanged 08:39:18 Received message from Master: op=Shutter serial=268802 08:39:18 Shutter LASER close 08:39:18 Received message from Camera: op=State serial=268804 08:39:18 GetSingleValue result=40 Value=cccccccc 08:39:18 SkyScan query 08:39:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:39:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:19 Parameters OK 08:39:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:19 Set A/D data flow result=40 08:39:19 Set A/D channel type result=40 08:39:19 Set A/D encoding result=40 08:39:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:19 Set channel filter=0.000000e+000 result=40 08:39:19 Config A/D Result=40 08:39:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:19 Get A/D filter: -9.255963e+061 result=40 08:39:19 Get A/D value=-858993460 result=40 08:39:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:19 Parameters OK 08:39:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:19 Set A/D data flow result=40 08:39:19 Set A/D channel type result=40 08:39:19 Set A/D encoding result=40 08:39:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:19 Set channel filter=0.000000e+000 result=40 08:39:19 Config A/D Result=40 08:39:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:19 Get A/D filter: -9.255963e+061 result=40 08:39:19 Get A/D value=-858993460 result=40 08:39:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:19 Aux= 08:39:19 Message to Camera, serial 268804 queued 08:39:56 Received message from Master: op=PointingHead serial=268817 08:39:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:39:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:39:56 Point started: ret=0 08:39:56 point_skyscan result=0 08:39:57 Check angles 08:39:57 SkyScan query 08:39:58 SkyScan query done: ret=0 az=64.245<-4283 ze=66.525<-7565 Statuses=0009 0008 08:39:58 Msec=0 True Az=64.245 Ze=66.525 Az status=0009 Ze status=0008 08:39:58 Check angles 08:39:58 SkyScan query 08:39:58 SkyScan query done: ret=0 az=81.795<-5453 ze=66.525<-7565 Statuses=0009 0008 08:39:58 Msec=750 True Az=81.795 Ze=66.525 Az status=0009 Ze status=0008 08:39:58 Check angles 08:39:58 SkyScan query 08:39:59 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 08:39:59 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 08:39:59 Check angles 08:39:59 SkyScan query 08:40:00 SkyScan query done: ret=0 az=116.655<-7777 ze=66.495<-7567 Statuses=0009 0008 08:40:00 Msec=2250 True Az=116.655 Ze=66.495 Az status=0009 Ze status=0008 08:40:00 Check angles 08:40:00 SkyScan query 08:40:01 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 08:40:01 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 08:40:01 Check angles 08:40:01 SkyScan query 08:40:01 SkyScan query done: ret=0 az=151.95<-10130 ze=66.495<-7567 Statuses=0009 0008 08:40:01 Msec=3750 True Az=151.95 Ze=66.495 Az status=0009 Ze status=0008 08:40:02 Check angles 08:40:02 SkyScan query 08:40:02 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:40:02 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:40:02 Message to Master queued w/err=0: serial=268817 error=0 08:40:07 Received message from Master: op=Filter serial=268818 08:40:07 Color wheel filter change from 0 to 0 08:40:07 FLIGetFilterPos err=0 currentPosition=0 08:40:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:07 Filter is already there-color wheel unchanged 08:40:07 Received message from Master: op=Shutter serial=268819 08:40:07 Shutter LASER close 08:40:07 Received message from Camera: op=State serial=268821 08:40:07 GetSingleValue result=40 Value=cccccccc 08:40:07 SkyScan query 08:40:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:40:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:08 Parameters OK 08:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:08 Set A/D data flow result=40 08:40:08 Set A/D channel type result=40 08:40:08 Set A/D encoding result=40 08:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:08 Set channel filter=0.000000e+000 result=40 08:40:08 Config A/D Result=40 08:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:08 Get A/D filter: -9.255963e+061 result=40 08:40:08 Get A/D value=-858993460 result=40 08:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:08 Parameters OK 08:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:08 Set A/D data flow result=40 08:40:08 Set A/D channel type result=40 08:40:08 Set A/D encoding result=40 08:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:08 Set channel filter=0.000000e+000 result=40 08:40:08 Config A/D Result=40 08:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:08 Get A/D filter: -9.255963e+061 result=40 08:40:08 Get A/D value=-858993460 result=40 08:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:08 Aux= 08:40:08 Message to Camera, serial 268821 queued 08:40:45 Received message from Master: op=PointingHead serial=268834 08:40:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:40:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:40:45 Point started: ret=0 08:40:45 point_skyscan result=0 08:40:46 Check angles 08:40:46 SkyScan query 08:40:47 SkyScan query done: ret=0 az=135.24<-9016 ze=96.075<-5595 Statuses=0009 0009 08:40:47 Msec=0 True Az=135.24 Ze=96.075 Az status=0009 Ze status=0009 08:40:47 Check angles 08:40:47 SkyScan query 08:40:47 SkyScan query done: ret=0 az=130.995<-8733 ze=117<-4200 Statuses=0008 0009 08:40:47 Msec=750 True Az=130.995 Ze=117 Az status=0008 Ze status=0009 08:40:47 Check angles 08:40:47 SkyScan query 08:40:48 SkyScan query done: ret=0 az=130.98<-8732 ze=138.045<-2797 Statuses=0008 0009 08:40:48 Msec=1500 True Az=130.98 Ze=138.045 Az status=0008 Ze status=0009 08:40:48 Check angles 08:40:48 SkyScan query 08:40:49 SkyScan query done: ret=0 az=130.995<-8733 ze=158.91<-1406 Statuses=0008 0009 08:40:49 Msec=2250 True Az=130.995 Ze=158.91 Az status=0008 Ze status=0009 08:40:49 Check angles 08:40:49 SkyScan query 08:40:50 SkyScan query done: ret=0 az=130.995<-8733 ze=179.82<-12 Statuses=0008 0009 08:40:50 Msec=3000 True Az=130.995 Ze=179.82 Az status=0008 Ze status=0009 08:40:50 Check angles 08:40:50 SkyScan query 08:40:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-159.165<-22611 Statuses=0008 0009 08:40:50 Msec=3750 True Az=130.995 Ze=-159.165 Az status=0008 Ze status=0009 08:40:50 Check angles 08:40:50 SkyScan query 08:40:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 08:40:51 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 08:40:51 Check angles 08:40:51 SkyScan query 08:40:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:40:52 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:40:52 Message to Master queued w/err=0: serial=268834 error=0 08:40:57 Received message from Master: op=Filter serial=268835 08:40:57 Color wheel filter change from 0 to 0 08:40:57 FLIGetFilterPos err=0 currentPosition=0 08:40:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:57 Filter is already there-color wheel unchanged 08:40:57 Received message from Master: op=Shutter serial=268836 08:40:57 Shutter LASER close 08:40:57 Received message from Camera: op=State serial=268838 08:40:57 GetSingleValue result=40 Value=cccccccc 08:40:57 SkyScan query 08:40:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:40:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:58 Parameters OK 08:40:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:58 Set A/D data flow result=40 08:40:58 Set A/D channel type result=40 08:40:58 Set A/D encoding result=40 08:40:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:58 Set channel filter=0.000000e+000 result=40 08:40:58 Config A/D Result=40 08:40:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:58 Get A/D filter: -9.255963e+061 result=40 08:40:58 Get A/D value=-858993460 result=40 08:40:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:58 Parameters OK 08:40:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:58 Set A/D data flow result=40 08:40:58 Set A/D channel type result=40 08:40:58 Set A/D encoding result=40 08:40:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:58 Set channel filter=0.000000e+000 result=40 08:40:58 Config A/D Result=40 08:40:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:58 Get A/D filter: -9.255963e+061 result=40 08:40:58 Get A/D value=-858993460 result=40 08:40:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:58 Aux= 08:40:58 Message to Camera, serial 268838 queued 08:41:33 Received message from Master: op=PointingHead serial=268850 08:41:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:41:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:41:34 Point started: ret=0 08:41:34 point_skyscan result=0 08:41:35 Check angles 08:41:35 SkyScan query 08:41:35 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 08:41:35 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 08:41:35 Check angles 08:41:35 SkyScan query 08:41:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:41:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:41:36 Message to Master queued w/err=0: serial=268850 error=0 08:41:41 Received message from Master: op=Filter serial=268851 08:41:41 Color wheel filter change from 0 to 0 08:41:41 FLIGetFilterPos err=0 currentPosition=0 08:41:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:41 Filter is already there-color wheel unchanged 08:41:41 Received message from Master: op=Shutter serial=268852 08:41:41 Shutter LASER open 08:41:41 Received message from Camera: op=State serial=268854 08:41:41 GetSingleValue result=40 Value=cccccccc 08:41:41 SkyScan query 08:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:41:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:42 Parameters OK 08:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:42 Set A/D data flow result=40 08:41:42 Set A/D channel type result=40 08:41:42 Set A/D encoding result=40 08:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:42 Set channel filter=0.000000e+000 result=40 08:41:42 Config A/D Result=40 08:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:42 Get A/D filter: -9.255963e+061 result=40 08:41:42 Get A/D value=-858993460 result=40 08:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:42 Parameters OK 08:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:42 Set A/D data flow result=40 08:41:42 Set A/D channel type result=40 08:41:42 Set A/D encoding result=40 08:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:42 Set channel filter=0.000000e+000 result=40 08:41:42 Config A/D Result=40 08:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:42 Get A/D filter: -9.255963e+061 result=40 08:41:42 Get A/D value=-858993460 result=40 08:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:42 Aux= 08:41:42 Message to Camera, serial 268854 queued 08:41:50 Received message from Master: op=Shutter serial=268864 08:41:50 Shutter LASER close 08:41:51 Received message from Master: op=PointingHead serial=268868 08:41:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:41:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:41:51 Point started: ret=0 08:41:51 point_skyscan result=0 08:41:52 Check angles 08:41:52 SkyScan query 08:41:52 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.565<-21571 Statuses=0009 0009 08:41:52 Msec=0 True Az=135.855 Ze=-143.565 Az status=0009 Ze status=0009 08:41:53 Check angles 08:41:53 SkyScan query 08:41:53 SkyScan query done: ret=0 az=153.27<-10218 ze=-122.595<-20173 Statuses=0009 0009 08:41:53 Msec=750 True Az=153.27 Ze=-122.595 Az status=0009 Ze status=0009 08:41:53 Check angles 08:41:53 SkyScan query 08:41:54 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.715<-18781 Statuses=0009 0009 08:41:54 Msec=1500 True Az=170.76 Ze=-101.715 Az status=0009 Ze status=0009 08:41:54 Check angles 08:41:54 SkyScan query 08:41:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.685<-17379 Statuses=0008 0009 08:41:55 Msec=2250 True Az=176.01 Ze=-80.685 Az status=0008 Ze status=0009 08:41:55 Check angles 08:41:55 SkyScan query 08:41:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.775<-15985 Statuses=0008 0009 08:41:55 Msec=3000 True Az=176.01 Ze=-59.775 Az status=0008 Ze status=0009 08:41:56 Check angles 08:41:56 SkyScan query 08:41:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:41:56 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:41:56 Message to Master queued w/err=0: serial=268868 error=0 08:42:01 Received message from Master: op=Filter serial=268869 08:42:01 Color wheel filter change from 0 to 0 08:42:01 FLIGetFilterPos err=0 currentPosition=0 08:42:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:01 Filter is already there-color wheel unchanged 08:42:01 Received message from Master: op=Shutter serial=268870 08:42:01 Shutter LASER close 08:42:02 Received message from Camera: op=State serial=268872 08:42:02 GetSingleValue result=40 Value=cccccccc 08:42:02 SkyScan query 08:42:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:42:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:02 Parameters OK 08:42:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:02 Set A/D data flow result=40 08:42:02 Set A/D channel type result=40 08:42:02 Set A/D encoding result=40 08:42:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:02 Set channel filter=0.000000e+000 result=40 08:42:02 Config A/D Result=40 08:42:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:02 Get A/D filter: -9.255963e+061 result=40 08:42:02 Get A/D value=-858993460 result=40 08:42:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:02 Parameters OK 08:42:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:02 Set A/D data flow result=40 08:42:02 Set A/D channel type result=40 08:42:02 Set A/D encoding result=40 08:42:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:02 Set channel filter=0.000000e+000 result=40 08:42:02 Config A/D Result=40 08:42:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:02 Get A/D filter: -9.255963e+061 result=40 08:42:02 Get A/D value=-858993460 result=40 08:42:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:02 Aux= 08:42:02 Message to Camera, serial 268872 queued 08:42:39 Received message from Master: op=PointingHead serial=268885 08:42:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:42:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:42:39 Point started: ret=0 08:42:39 point_skyscan result=0 08:42:40 Check angles 08:42:40 SkyScan query 08:42:41 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.195<-13413 Statuses=0009 0009 08:42:41 Msec=0 True Az=152.58 Ze=-21.195 Az status=0009 Ze status=0009 08:42:41 Check angles 08:42:41 SkyScan query 08:42:41 SkyScan query done: ret=0 az=135.03<-9002 ze=-0.255<-12017 Statuses=0009 0009 08:42:41 Msec=750 True Az=135.03 Ze=-0.255 Az status=0009 Ze status=0009 08:42:42 Check angles 08:42:42 SkyScan query 08:42:42 SkyScan query done: ret=0 az=117.285<-7819 ze=21.18<-10588 Statuses=0009 0009 08:42:42 Msec=1500 True Az=117.285 Ze=21.18 Az status=0009 Ze status=0009 08:42:42 Check angles 08:42:42 SkyScan query 08:42:43 SkyScan query done: ret=0 az=99.42<-6628 ze=42.465<-9169 Statuses=0009 0009 08:42:43 Msec=2250 True Az=99.42 Ze=42.465 Az status=0009 Ze status=0009 08:42:43 Check angles 08:42:43 SkyScan query 08:42:44 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 08:42:44 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 08:42:44 Check angles 08:42:44 SkyScan query 08:42:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:42:44 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:42:44 Message to Master queued w/err=0: serial=268885 error=0 08:42:49 Received message from Master: op=Filter serial=268886 08:42:49 Color wheel filter change from 0 to 0 08:42:49 FLIGetFilterPos err=0 currentPosition=0 08:42:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:49 Filter is already there-color wheel unchanged 08:42:50 Received message from Master: op=Shutter serial=268887 08:42:50 Shutter LASER close 08:42:50 Received message from Camera: op=State serial=268889 08:42:50 GetSingleValue result=40 Value=cccccccc 08:42:50 SkyScan query 08:42:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:42:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:50 Parameters OK 08:42:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:50 Set A/D data flow result=40 08:42:50 Set A/D channel type result=40 08:42:50 Set A/D encoding result=40 08:42:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:50 Set channel filter=0.000000e+000 result=40 08:42:50 Config A/D Result=40 08:42:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:50 Get A/D filter: -9.255963e+061 result=40 08:42:50 Get A/D value=-858993460 result=40 08:42:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:50 Parameters OK 08:42:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:50 Set A/D data flow result=40 08:42:50 Set A/D channel type result=40 08:42:50 Set A/D encoding result=40 08:42:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:50 Set channel filter=0.000000e+000 result=40 08:42:50 Config A/D Result=40 08:42:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:50 Get A/D filter: -9.255963e+061 result=40 08:42:50 Get A/D value=-858993460 result=40 08:42:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:50 Aux= 08:42:50 Message to Camera, serial 268889 queued 08:43:26 Received message from Master: op=PointingHead serial=268901 08:43:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:43:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:43:27 Point started: ret=0 08:43:27 point_skyscan result=0 08:43:27 Check angles 08:43:27 SkyScan query 08:43:28 SkyScan query done: ret=0 az=85.995<-5733 ze=21.165<-10589 Statuses=0008 0009 08:43:28 Msec=0 True Az=85.995 Ze=21.165 Az status=0008 Ze status=0009 08:43:28 Check angles 08:43:28 SkyScan query 08:43:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.255<-12017 Statuses=0008 0009 08:43:29 Msec=750 True Az=85.995 Ze=-0.255 Az status=0008 Ze status=0009 08:43:29 Check angles 08:43:29 SkyScan query 08:43:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.165<-13411 Statuses=0008 0009 08:43:30 Msec=1500 True Az=85.995 Ze=-21.165 Az status=0008 Ze status=0009 08:43:30 Check angles 08:43:30 SkyScan query 08:43:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.195<-14813 Statuses=0008 0009 08:43:30 Msec=2250 True Az=85.995 Ze=-42.195 Az status=0008 Ze status=0009 08:43:30 Check angles 08:43:30 SkyScan query 08:43:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:43:31 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:43:31 Message to Master queued w/err=0: serial=268901 error=0 08:43:36 Received message from Master: op=Filter serial=268902 08:43:36 Color wheel filter change from 0 to 0 08:43:36 FLIGetFilterPos err=0 currentPosition=0 08:43:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:36 Filter is already there-color wheel unchanged 08:43:36 Received message from Master: op=Shutter serial=268903 08:43:36 Shutter LASER close 08:43:36 Received message from Camera: op=State serial=268905 08:43:36 GetSingleValue result=40 Value=cccccccc 08:43:36 SkyScan query 08:43:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:43:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:37 Parameters OK 08:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:37 Set A/D data flow result=40 08:43:37 Set A/D channel type result=40 08:43:37 Set A/D encoding result=40 08:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:37 Set channel filter=0.000000e+000 result=40 08:43:37 Config A/D Result=40 08:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:37 Get A/D filter: -9.255963e+061 result=40 08:43:37 Get A/D value=-858993460 result=40 08:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:37 Parameters OK 08:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:37 Set A/D data flow result=40 08:43:37 Set A/D channel type result=40 08:43:37 Set A/D encoding result=40 08:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:37 Set channel filter=0.000000e+000 result=40 08:43:37 Config A/D Result=40 08:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:37 Get A/D filter: -9.255963e+061 result=40 08:43:37 Get A/D value=-858993460 result=40 08:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:37 Aux= 08:43:37 Message to Camera, serial 268905 queued 08:44:14 Received message from Master: op=PointingHead serial=268918 08:44:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:44:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:44:14 Point started: ret=0 08:44:14 point_skyscan result=0 08:44:15 Check angles 08:44:15 SkyScan query 08:44:15 SkyScan query done: ret=0 az=108.72<-7248 ze=-80.985<-17399 Statuses=0009 0009 08:44:15 Msec=0 True Az=108.72 Ze=-80.985 Az status=0009 Ze status=0009 08:44:16 Check angles 08:44:16 SkyScan query 08:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 08:44:16 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 08:44:16 Check angles 08:44:16 SkyScan query 08:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.88<-20192 Statuses=0008 0009 08:44:17 Msec=1500 True Az=112.995 Ze=-122.88 Az status=0008 Ze status=0009 08:44:17 Check angles 08:44:17 SkyScan query 08:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.85<-21590 Statuses=0008 0009 08:44:18 Msec=2250 True Az=112.995 Ze=-143.85 Az status=0008 Ze status=0009 08:44:18 Check angles 08:44:18 SkyScan query 08:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.82<-22988 Statuses=0008 0009 08:44:18 Msec=3000 True Az=112.995 Ze=-164.82 Az status=0008 Ze status=0009 08:44:19 Check angles 08:44:19 SkyScan query 08:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:44:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:44:19 Message to Master queued w/err=0: serial=268918 error=0 08:44:24 Received message from Master: op=Filter serial=268919 08:44:24 Color wheel filter change from 0 to 0 08:44:24 FLIGetFilterPos err=0 currentPosition=0 08:44:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:24 Filter is already there-color wheel unchanged 08:44:24 Received message from Master: op=Shutter serial=268920 08:44:24 Shutter LASER open 08:44:24 Received message from Camera: op=State serial=268922 08:44:24 GetSingleValue result=40 Value=cccccccc 08:44:24 SkyScan query 08:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:44:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:25 Parameters OK 08:44:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:25 Set A/D data flow result=40 08:44:25 Set A/D channel type result=40 08:44:25 Set A/D encoding result=40 08:44:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:25 Set channel filter=0.000000e+000 result=40 08:44:25 Config A/D Result=40 08:44:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:25 Get A/D filter: -9.255963e+061 result=40 08:44:25 Get A/D value=-858993460 result=40 08:44:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:25 Parameters OK 08:44:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:25 Set A/D data flow result=40 08:44:25 Set A/D channel type result=40 08:44:25 Set A/D encoding result=40 08:44:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:25 Set channel filter=0.000000e+000 result=40 08:44:25 Config A/D Result=40 08:44:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:25 Get A/D filter: -9.255963e+061 result=40 08:44:25 Get A/D value=-858993460 result=40 08:44:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:25 Aux= 08:44:25 Message to Camera, serial 268922 queued 08:44:33 Received message from Master: op=Shutter serial=268932 08:44:33 Shutter LASER close 08:44:34 Received message from Master: op=PointingHead serial=268936 08:44:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:44:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:44:34 Point started: ret=0 08:44:34 point_skyscan result=0 08:44:35 Check angles 08:44:35 SkyScan query 08:44:36 SkyScan query done: ret=0 az=89.535<-5969 ze=156.75<-1550 Statuses=0009 0009 08:44:36 Msec=0 True Az=89.535 Ze=156.75 Az status=0009 Ze status=0009 08:44:36 Check angles 08:44:36 SkyScan query 08:44:36 SkyScan query done: ret=0 az=72.045<-4803 ze=135.81<-2946 Statuses=0009 0009 08:44:36 Msec=750 True Az=72.045 Ze=135.81 Az status=0009 Ze status=0009 08:44:37 Check angles 08:44:37 SkyScan query 08:44:37 SkyScan query done: ret=0 az=54.24<-3616 ze=114.36<-4376 Statuses=0009 0009 08:44:37 Msec=1500 True Az=54.24 Ze=114.36 Az status=0009 Ze status=0009 08:44:37 Check angles 08:44:37 SkyScan query 08:44:38 SkyScan query done: ret=0 az=40.965<-2731 ze=93.42<-5772 Statuses=0009 0009 08:44:38 Msec=2250 True Az=40.965 Ze=93.42 Az status=0009 Ze status=0009 08:44:38 Check angles 08:44:38 SkyScan query 08:44:39 SkyScan query done: ret=0 az=40.995<-2733 ze=72.48<-7168 Statuses=0008 0009 08:44:39 Msec=3000 True Az=40.995 Ze=72.48 Az status=0008 Ze status=0009 08:44:39 Check angles 08:44:39 SkyScan query 08:44:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 08:44:39 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 08:44:40 Check angles 08:44:40 SkyScan query 08:44:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:44:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:44:40 Message to Master queued w/err=0: serial=268936 error=0 08:44:45 Received message from Master: op=Filter serial=268937 08:44:45 Color wheel filter change from 0 to 0 08:44:45 FLIGetFilterPos err=0 currentPosition=0 08:44:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:45 Filter is already there-color wheel unchanged 08:44:45 Received message from Master: op=Shutter serial=268938 08:44:45 Shutter LASER close 08:44:45 Received message from Camera: op=State serial=268940 08:44:45 GetSingleValue result=40 Value=cccccccc 08:44:45 SkyScan query 08:44:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:44:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:46 Parameters OK 08:44:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:46 Set A/D data flow result=40 08:44:46 Set A/D channel type result=40 08:44:46 Set A/D encoding result=40 08:44:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:46 Set channel filter=0.000000e+000 result=40 08:44:46 Config A/D Result=40 08:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:46 Get A/D filter: -9.255963e+061 result=40 08:44:46 Get A/D value=-858993460 result=40 08:44:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:46 Parameters OK 08:44:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:46 Set A/D data flow result=40 08:44:46 Set A/D channel type result=40 08:44:46 Set A/D encoding result=40 08:44:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:46 Set channel filter=0.000000e+000 result=40 08:44:46 Config A/D Result=40 08:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:46 Get A/D filter: -9.255963e+061 result=40 08:44:46 Get A/D value=-858993460 result=40 08:44:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:46 Aux= 08:44:46 Message to Camera, serial 268940 queued 08:45:23 Received message from Master: op=PointingHead serial=268953 08:45:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:45:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:45:23 Point started: ret=0 08:45:23 point_skyscan result=0 08:45:24 Check angles 08:45:24 SkyScan query 08:45:25 SkyScan query done: ret=0 az=63.765<-4251 ze=66.525<-7565 Statuses=0009 0008 08:45:25 Msec=0 True Az=63.765 Ze=66.525 Az status=0009 Ze status=0008 08:45:25 Check angles 08:45:25 SkyScan query 08:45:25 SkyScan query done: ret=0 az=81.135<-5409 ze=66.51<-7566 Statuses=0009 0008 08:45:25 Msec=750 True Az=81.135 Ze=66.51 Az status=0009 Ze status=0008 08:45:26 Check angles 08:45:26 SkyScan query 08:45:26 SkyScan query done: ret=0 az=98.625<-6575 ze=66.495<-7567 Statuses=0009 0008 08:45:26 Msec=1500 True Az=98.625 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-19 08:45:26] 08:45:26 Check angles 08:45:26 SkyScan query 08:45:27 SkyScan query done: ret=0 az=117.69<-7846 ze=66.495<-7567 Statuses=0009 0008 08:45:27 Msec=2250 True Az=117.69 Ze=66.495 Az status=0009 Ze status=0008 08:45:27 Received message from Master: op=Identify serial=268954 08:45:27 Check angles 08:45:27 SkyScan query 08:45:28 SkyScan query done: ret=0 az=133.455<-8897 ze=66.495<-7567 Statuses=0009 0008 08:45:28 Msec=3000 True Az=133.455 Ze=66.495 Az status=0009 Ze status=0008 08:45:28 Check angles 08:45:28 SkyScan query 08:45:28 SkyScan query done: ret=0 az=151.11<-10074 ze=66.495<-7567 Statuses=0009 0008 08:45:28 Msec=3750 True Az=151.11 Ze=66.495 Az status=0009 Ze status=0008 08:45:29 Check angles 08:45:29 SkyScan query 08:45:29 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:45:29 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:45:29 Message to Master queued w/err=0: serial=268953 error=0 08:45:34 Received message from Master: op=Filter serial=268957 08:45:34 Color wheel filter change from 0 to 0 08:45:34 FLIGetFilterPos err=0 currentPosition=0 08:45:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:34 Filter is already there-color wheel unchanged 08:45:34 Received message from Master: op=Shutter serial=268958 08:45:34 Shutter LASER close 08:45:34 Received message from Camera: op=State serial=268960 08:45:34 GetSingleValue result=40 Value=cccccccc 08:45:34 SkyScan query 08:45:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:45:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:35 Parameters OK 08:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:35 Set A/D data flow result=40 08:45:35 Set A/D channel type result=40 08:45:35 Set A/D encoding result=40 08:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:35 Set channel filter=0.000000e+000 result=40 08:45:35 Config A/D Result=40 08:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:35 Get A/D filter: -9.255963e+061 result=40 08:45:35 Get A/D value=-858993460 result=40 08:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:35 Parameters OK 08:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:35 Set A/D data flow result=40 08:45:35 Set A/D channel type result=40 08:45:35 Set A/D encoding result=40 08:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:35 Set channel filter=0.000000e+000 result=40 08:45:35 Config A/D Result=40 08:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:35 Get A/D filter: -9.255963e+061 result=40 08:45:35 Get A/D value=-858993460 result=40 08:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:35 Aux= 08:45:35 Message to Camera, serial 268960 queued 08:46:12 Received message from Master: op=PointingHead serial=268973 08:46:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:46:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:46:12 Point started: ret=0 08:46:12 point_skyscan result=0 08:46:13 Check angles 08:46:13 SkyScan query 08:46:14 SkyScan query done: ret=0 az=135.045<-9003 ze=96.27<-5582 Statuses=0009 0009 08:46:14 Msec=0 True Az=135.045 Ze=96.27 Az status=0009 Ze status=0009 08:46:14 Check angles 08:46:14 SkyScan query 08:46:14 SkyScan query done: ret=0 az=130.995<-8733 ze=117.66<-4156 Statuses=0008 0009 08:46:14 Msec=750 True Az=130.995 Ze=117.66 Az status=0008 Ze status=0009 08:46:14 Check angles 08:46:14 SkyScan query 08:46:15 SkyScan query done: ret=0 az=130.995<-8733 ze=139.05<-2730 Statuses=0008 0009 08:46:15 Msec=1500 True Az=130.995 Ze=139.05 Az status=0008 Ze status=0009 08:46:15 Check angles 08:46:15 SkyScan query 08:46:16 SkyScan query done: ret=0 az=130.995<-8733 ze=159.975<-1335 Statuses=0008 0009 08:46:16 Msec=2250 True Az=130.995 Ze=159.975 Az status=0008 Ze status=0009 08:46:16 Check angles 08:46:16 SkyScan query 08:46:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.025<-23935 Statuses=0008 0009 08:46:17 Msec=3000 True Az=130.995 Ze=-179.025 Az status=0008 Ze status=0009 08:46:17 Check angles 08:46:17 SkyScan query 08:46:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.13<-22542 Statuses=0008 0009 08:46:17 Msec=3750 True Az=130.995 Ze=-158.13 Az status=0008 Ze status=0009 08:46:17 Check angles 08:46:17 SkyScan query 08:46:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 08:46:18 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 08:46:18 Check angles 08:46:18 SkyScan query 08:46:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:46:19 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:46:19 Message to Master queued w/err=0: serial=268973 error=0 08:46:24 Received message from Master: op=Filter serial=268974 08:46:24 Color wheel filter change from 0 to 0 08:46:24 FLIGetFilterPos err=0 currentPosition=0 08:46:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:24 Filter is already there-color wheel unchanged 08:46:24 Received message from Master: op=Shutter serial=268975 08:46:24 Shutter LASER close 08:46:24 Received message from Camera: op=State serial=268977 08:46:24 GetSingleValue result=40 Value=cccccccc 08:46:24 SkyScan query 08:46:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:46:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:25 Parameters OK 08:46:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:25 Set A/D data flow result=40 08:46:25 Set A/D channel type result=40 08:46:25 Set A/D encoding result=40 08:46:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:25 Set channel filter=0.000000e+000 result=40 08:46:25 Config A/D Result=40 08:46:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:25 Get A/D filter: -9.255963e+061 result=40 08:46:25 Get A/D value=-858993460 result=40 08:46:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:25 Parameters OK 08:46:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:25 Set A/D data flow result=40 08:46:25 Set A/D channel type result=40 08:46:25 Set A/D encoding result=40 08:46:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:25 Set channel filter=0.000000e+000 result=40 08:46:25 Config A/D Result=40 08:46:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:25 Get A/D filter: -9.255963e+061 result=40 08:46:25 Get A/D value=-858993460 result=40 08:46:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:25 Aux= 08:46:25 Message to Camera, serial 268977 queued 08:47:01 Received message from Master: op=PointingHead serial=268990 08:47:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:47:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:47:02 Point started: ret=0 08:47:02 point_skyscan result=0 08:47:03 Check angles 08:47:03 SkyScan query 08:47:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 08:47:03 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 08:47:03 Check angles 08:47:03 SkyScan query 08:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:47:04 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:47:04 Message to Master queued w/err=0: serial=268990 error=0 08:47:09 Received message from Master: op=Filter serial=268991 08:47:09 Color wheel filter change from 0 to 0 08:47:09 FLIGetFilterPos err=0 currentPosition=0 08:47:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:09 Filter is already there-color wheel unchanged 08:47:09 Received message from Master: op=Shutter serial=268992 08:47:09 Shutter LASER open 08:47:09 Received message from Camera: op=State serial=268994 08:47:09 GetSingleValue result=40 Value=cccccccc 08:47:09 SkyScan query 08:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:47:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:10 Parameters OK 08:47:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:10 Set A/D data flow result=40 08:47:10 Set A/D channel type result=40 08:47:10 Set A/D encoding result=40 08:47:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:10 Set channel filter=0.000000e+000 result=40 08:47:10 Config A/D Result=40 08:47:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:10 Get A/D filter: -9.255963e+061 result=40 08:47:10 Get A/D value=-858993460 result=40 08:47:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:10 Parameters OK 08:47:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:10 Set A/D data flow result=40 08:47:10 Set A/D channel type result=40 08:47:10 Set A/D encoding result=40 08:47:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:10 Set channel filter=0.000000e+000 result=40 08:47:10 Config A/D Result=40 08:47:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:10 Get A/D filter: -9.255963e+061 result=40 08:47:10 Get A/D value=-858993460 result=40 08:47:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:10 Aux= 08:47:10 Message to Camera, serial 268994 queued 08:47:18 Received message from Master: op=Shutter serial=269004 08:47:18 Shutter LASER close 08:47:19 Received message from Master: op=PointingHead serial=269008 08:47:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:47:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:47:19 Point started: ret=0 08:47:19 point_skyscan result=0 08:47:20 Check angles 08:47:20 SkyScan query 08:47:20 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.535<-21569 Statuses=0009 0009 08:47:20 Msec=0 True Az=135.705 Ze=-143.535 Az status=0009 Ze status=0009 08:47:21 Check angles 08:47:21 SkyScan query 08:47:21 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.58<-20172 Statuses=0009 0009 08:47:21 Msec=750 True Az=153.24 Ze=-122.58 Az status=0009 Ze status=0009 08:47:21 Check angles 08:47:21 SkyScan query 08:47:22 SkyScan query done: ret=0 az=171.12<-11408 ze=-101.235<-18749 Statuses=0009 0009 08:47:22 Msec=1500 True Az=171.12 Ze=-101.235 Az status=0009 Ze status=0009 08:47:22 Check angles 08:47:22 SkyScan query 08:47:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.28<-17352 Statuses=0008 0009 08:47:23 Msec=2250 True Az=176.01 Ze=-80.28 Az status=0008 Ze status=0009 08:47:23 Check angles 08:47:23 SkyScan query 08:47:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.325<-15955 Statuses=0008 0009 08:47:23 Msec=3000 True Az=176.01 Ze=-59.325 Az status=0008 Ze status=0009 08:47:24 Check angles 08:47:24 SkyScan query 08:47:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:47:24 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:47:24 Message to Master queued w/err=0: serial=269008 error=0 08:47:29 Received message from Master: op=Filter serial=269009 08:47:29 Color wheel filter change from 0 to 0 08:47:29 FLIGetFilterPos err=0 currentPosition=0 08:47:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:29 Filter is already there-color wheel unchanged 08:47:29 Received message from Master: op=Shutter serial=269010 08:47:29 Shutter LASER close 08:47:30 Received message from Camera: op=State serial=269012 08:47:30 GetSingleValue result=40 Value=cccccccc 08:47:30 SkyScan query 08:47:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:47:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:30 Parameters OK 08:47:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:30 Set A/D data flow result=40 08:47:30 Set A/D channel type result=40 08:47:30 Set A/D encoding result=40 08:47:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:30 Set channel filter=0.000000e+000 result=40 08:47:30 Config A/D Result=40 08:47:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:30 Get A/D filter: -9.255963e+061 result=40 08:47:30 Get A/D value=-858993460 result=40 08:47:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:30 Parameters OK 08:47:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:30 Set A/D data flow result=40 08:47:30 Set A/D channel type result=40 08:47:30 Set A/D encoding result=40 08:47:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:30 Set channel filter=0.000000e+000 result=40 08:47:30 Config A/D Result=40 08:47:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:30 Get A/D filter: -9.255963e+061 result=40 08:47:30 Get A/D value=-858993460 result=40 08:47:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:30 Aux= 08:47:30 Message to Camera, serial 269012 queued 08:48:07 Received message from Master: op=PointingHead serial=269025 08:48:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:48:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:48:07 Point started: ret=0 08:48:07 point_skyscan result=0 08:48:08 Check angles 08:48:08 SkyScan query 08:48:09 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.63<-13442 Statuses=0009 0009 08:48:09 Msec=0 True Az=152.925 Ze=-21.63 Az status=0009 Ze status=0009 08:48:09 Check angles 08:48:09 SkyScan query 08:48:09 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.6<-12040 Statuses=0009 0009 08:48:09 Msec=750 True Az=135.405 Ze=-0.6 Az status=0009 Ze status=0009 08:48:10 Check angles 08:48:10 SkyScan query 08:48:10 SkyScan query done: ret=0 az=117.855<-7857 ze=20.295<-10647 Statuses=0009 0009 08:48:10 Msec=1500 True Az=117.855 Ze=20.295 Az status=0009 Ze status=0009 08:48:10 Check angles 08:48:10 SkyScan query 08:48:11 SkyScan query done: ret=0 az=100.53<-6702 ze=41.31<-9246 Statuses=0009 0009 08:48:11 Msec=2250 True Az=100.53 Ze=41.31 Az status=0009 Ze status=0009 08:48:11 Check angles 08:48:11 SkyScan query 08:48:12 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 08:48:12 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 08:48:12 Check angles 08:48:12 SkyScan query 08:48:12 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 08:48:12 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 08:48:12 Message to Master queued w/err=0: serial=269025 error=0 08:48:17 Received message from Master: op=Filter serial=269026 08:48:17 Color wheel filter change from 0 to 0 08:48:17 FLIGetFilterPos err=0 currentPosition=0 08:48:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:17 Filter is already there-color wheel unchanged 08:48:18 Received message from Master: op=Shutter serial=269027 08:48:18 Shutter LASER close 08:48:18 Received message from Camera: op=State serial=269029 08:48:18 GetSingleValue result=40 Value=cccccccc 08:48:18 SkyScan query 08:48:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:18 Parameters OK 08:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:18 Set A/D data flow result=40 08:48:18 Set A/D channel type result=40 08:48:18 Set A/D encoding result=40 08:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:18 Set channel filter=0.000000e+000 result=40 08:48:18 Config A/D Result=40 08:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:18 Get A/D filter: -9.255963e+061 result=40 08:48:18 Get A/D value=-858993460 result=40 08:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:18 Parameters OK 08:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:18 Set A/D data flow result=40 08:48:18 Set A/D channel type result=40 08:48:18 Set A/D encoding result=40 08:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:18 Set channel filter=0.000000e+000 result=40 08:48:18 Config A/D Result=40 08:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:18 Get A/D filter: -9.255963e+061 result=40 08:48:18 Get A/D value=-858993460 result=40 08:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:18 Aux= 08:48:18 Message to Camera, serial 269029 queued 08:48:55 Received message from Master: op=PointingHead serial=269042 08:48:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:48:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:48:55 Point started: ret=0 08:48:55 point_skyscan result=0 08:48:56 Check angles 08:48:56 SkyScan query 08:48:57 SkyScan query done: ret=0 az=85.995<-5733 ze=21.615<-10559 Statuses=0008 0009 08:48:57 Msec=0 True Az=85.995 Ze=21.615 Az status=0008 Ze status=0009 08:48:57 Check angles 08:48:57 SkyScan query 08:48:58 SkyScan query done: ret=0 az=86.01<-5734 ze=0.255<-11983 Statuses=0008 0009 08:48:58 Msec=750 True Az=86.01 Ze=0.255 Az status=0008 Ze status=0009 08:48:58 Check angles 08:48:58 SkyScan query 08:48:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.12<-13408 Statuses=0008 0009 08:48:58 Msec=1500 True Az=85.995 Ze=-21.12 Az status=0008 Ze status=0009 08:48:59 Check angles 08:48:59 SkyScan query 08:48:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.135<-14809 Statuses=0008 0009 08:48:59 Msec=2250 True Az=85.995 Ze=-42.135 Az status=0008 Ze status=0009 08:48:59 Check angles 08:48:59 SkyScan query 08:49:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:49:00 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:49:00 Message to Master queued w/err=0: serial=269042 error=0 08:49:05 Received message from Master: op=Filter serial=269043 08:49:05 Color wheel filter change from 0 to 0 08:49:05 FLIGetFilterPos err=0 currentPosition=0 08:49:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:05 Filter is already there-color wheel unchanged 08:49:05 Received message from Master: op=Shutter serial=269044 08:49:05 Shutter LASER close 08:49:05 Received message from Camera: op=State serial=269046 08:49:05 GetSingleValue result=40 Value=cccccccc 08:49:05 SkyScan query 08:49:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:49:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:06 Parameters OK 08:49:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:06 Set A/D data flow result=40 08:49:06 Set A/D channel type result=40 08:49:06 Set A/D encoding result=40 08:49:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:06 Set channel filter=0.000000e+000 result=40 08:49:06 Config A/D Result=40 08:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:06 Get A/D filter: -9.255963e+061 result=40 08:49:06 Get A/D value=-858993460 result=40 08:49:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:06 Parameters OK 08:49:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:06 Set A/D data flow result=40 08:49:06 Set A/D channel type result=40 08:49:06 Set A/D encoding result=40 08:49:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:06 Set channel filter=0.000000e+000 result=40 08:49:06 Config A/D Result=40 08:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:06 Get A/D filter: -9.255963e+061 result=40 08:49:06 Get A/D value=-858993460 result=40 08:49:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:06 Aux= 08:49:06 Message to Camera, serial 269046 queued 08:49:43 Received message from Master: op=PointingHead serial=269059 08:49:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:49:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:49:43 Point started: ret=0 08:49:43 point_skyscan result=0 08:49:44 Check angles 08:49:44 SkyScan query 08:49:44 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.675<-17445 Statuses=0009 0009 08:49:44 Msec=0 True Az=109.395 Ze=-81.675 Az status=0009 Ze status=0009 08:49:44 Check angles 08:49:44 SkyScan query 08:49:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.6<-18840 Statuses=0008 0009 08:49:45 Msec=750 True Az=112.995 Ze=-102.6 Az status=0008 Ze status=0009 08:49:45 Check angles 08:49:45 SkyScan query 08:49:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.555<-20237 Statuses=0008 0009 08:49:46 Msec=1500 True Az=112.995 Ze=-123.555 Az status=0008 Ze status=0009 08:49:46 Check angles 08:49:46 SkyScan query 08:49:47 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.435<-21629 Statuses=0008 0009 08:49:47 Msec=2250 True Az=112.98 Ze=-144.435 Az status=0008 Ze status=0009 08:49:47 Check angles 08:49:47 SkyScan query 08:49:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.465<-23031 Statuses=0008 0009 08:49:47 Msec=3000 True Az=112.995 Ze=-165.465 Az status=0008 Ze status=0009 08:49:47 Check angles 08:49:47 SkyScan query 08:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:49:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:49:48 Message to Master queued w/err=0: serial=269059 error=0 08:49:53 Received message from Master: op=Filter serial=269060 08:49:53 Color wheel filter change from 0 to 0 08:49:53 FLIGetFilterPos err=0 currentPosition=0 08:49:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:53 Filter is already there-color wheel unchanged 08:49:53 Received message from Master: op=Shutter serial=269061 08:49:53 Shutter LASER open 08:49:53 Received message from Camera: op=State serial=269063 08:49:53 GetSingleValue result=40 Value=cccccccc 08:49:53 SkyScan query 08:49:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:49:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:54 Parameters OK 08:49:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:54 Set A/D data flow result=40 08:49:54 Set A/D channel type result=40 08:49:54 Set A/D encoding result=40 08:49:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:54 Set channel filter=0.000000e+000 result=40 08:49:54 Config A/D Result=40 08:49:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:54 Get A/D filter: -9.255963e+061 result=40 08:49:54 Get A/D value=-858993460 result=40 08:49:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:54 Parameters OK 08:49:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:54 Set A/D data flow result=40 08:49:54 Set A/D channel type result=40 08:49:54 Set A/D encoding result=40 08:49:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:54 Set channel filter=0.000000e+000 result=40 08:49:54 Config A/D Result=40 08:49:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:54 Get A/D filter: -9.255963e+061 result=40 08:49:54 Get A/D value=-858993460 result=40 08:49:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:54 Aux= 08:49:54 Message to Camera, serial 269063 queued 08:50:02 Received message from Master: op=Shutter serial=269073 08:50:02 Shutter LASER close 08:50:03 Received message from Master: op=PointingHead serial=269077 08:50:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:50:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:50:03 Point started: ret=0 08:50:03 point_skyscan result=0 08:50:04 Check angles 08:50:04 SkyScan query 08:50:04 SkyScan query done: ret=0 az=90.105<-6007 ze=157.395<-1507 Statuses=0009 0009 08:50:04 Msec=0 True Az=90.105 Ze=157.395 Az status=0009 Ze status=0009 08:50:05 Check angles 08:50:05 SkyScan query 08:50:05 SkyScan query done: ret=0 az=72.105<-4807 ze=136.05<-2930 Statuses=0009 0009 08:50:05 Msec=750 True Az=72.105 Ze=136.05 Az status=0009 Ze status=0009 08:50:05 Check angles 08:50:05 SkyScan query 08:50:06 SkyScan query done: ret=0 az=54.375<-3625 ze=114.525<-4365 Statuses=0009 0009 08:50:06 Msec=1500 True Az=54.375 Ze=114.525 Az status=0009 Ze status=0009 08:50:06 Check angles 08:50:06 SkyScan query 08:50:07 SkyScan query done: ret=0 az=40.98<-2732 ze=93.675<-5755 Statuses=0009 0009 08:50:07 Msec=2250 True Az=40.98 Ze=93.675 Az status=0009 Ze status=0009 08:50:07 Check angles 08:50:07 SkyScan query 08:50:08 SkyScan query done: ret=0 az=40.995<-2733 ze=72.705<-7153 Statuses=0008 0009 08:50:08 Msec=3000 True Az=40.995 Ze=72.705 Az status=0008 Ze status=0009 08:50:08 Check angles 08:50:08 SkyScan query 08:50:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 08:50:08 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 08:50:08 Check angles 08:50:08 SkyScan query 08:50:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:50:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:50:09 Message to Master queued w/err=0: serial=269077 error=0 08:50:14 Received message from Master: op=Filter serial=269078 08:50:14 Color wheel filter change from 0 to 0 08:50:14 FLIGetFilterPos err=0 currentPosition=0 08:50:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:14 Filter is already there-color wheel unchanged 08:50:14 Received message from Master: op=Shutter serial=269079 08:50:14 Shutter LASER close 08:50:14 Received message from Camera: op=State serial=269081 08:50:14 GetSingleValue result=40 Value=cccccccc 08:50:14 SkyScan query 08:50:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:50:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:15 Parameters OK 08:50:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:15 Set A/D data flow result=40 08:50:15 Set A/D channel type result=40 08:50:15 Set A/D encoding result=40 08:50:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:15 Set channel filter=0.000000e+000 result=40 08:50:15 Config A/D Result=40 08:50:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:15 Get A/D filter: -9.255963e+061 result=40 08:50:15 Get A/D value=-858993460 result=40 08:50:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:15 Parameters OK 08:50:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:15 Set A/D data flow result=40 08:50:15 Set A/D channel type result=40 08:50:15 Set A/D encoding result=40 08:50:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:15 Set channel filter=0.000000e+000 result=40 08:50:15 Config A/D Result=40 08:50:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:15 Get A/D filter: -9.255963e+061 result=40 08:50:15 Get A/D value=-858993460 result=40 08:50:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:15 Aux= 08:50:15 Message to Camera, serial 269081 queued 08:50:52 Received message from Master: op=PointingHead serial=269094 08:50:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:50:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:50:52 Point started: ret=0 08:50:52 point_skyscan result=0 08:50:53 Check angles 08:50:53 SkyScan query 08:50:53 SkyScan query done: ret=0 az=63.765<-4251 ze=66.525<-7565 Statuses=0009 0008 08:50:53 Msec=0 True Az=63.765 Ze=66.525 Az status=0009 Ze status=0008 08:50:54 Check angles 08:50:54 SkyScan query 08:50:54 SkyScan query done: ret=0 az=81.135<-5409 ze=66.51<-7566 Statuses=0009 0008 08:50:54 Msec=750 True Az=81.135 Ze=66.51 Az status=0009 Ze status=0008 08:50:54 Check angles 08:50:54 SkyScan query 08:50:55 SkyScan query done: ret=0 az=98.655<-6577 ze=66.495<-7567 Statuses=0009 0008 08:50:55 Msec=1500 True Az=98.655 Ze=66.495 Az status=0009 Ze status=0008 08:50:55 Check angles 08:50:55 SkyScan query 08:50:56 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 08:50:56 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 08:50:56 Check angles 08:50:56 SkyScan query 08:50:56 SkyScan query done: ret=0 az=133.98<-8932 ze=66.495<-7567 Statuses=0009 0008 08:50:56 Msec=3000 True Az=133.98 Ze=66.495 Az status=0009 Ze status=0008 08:50:57 Check angles 08:50:57 SkyScan query 08:50:57 SkyScan query done: ret=0 az=151.425<-10095 ze=66.495<-7567 Statuses=0009 0008 08:50:57 Msec=3750 True Az=151.425 Ze=66.495 Az status=0009 Ze status=0008 08:50:57 Check angles 08:50:57 SkyScan query 08:50:58 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:50:58 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:50:58 Message to Master queued w/err=0: serial=269094 error=0 08:51:03 Received message from Master: op=Filter serial=269095 08:51:03 Color wheel filter change from 0 to 0 08:51:03 FLIGetFilterPos err=0 currentPosition=0 08:51:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:03 Filter is already there-color wheel unchanged 08:51:03 Received message from Master: op=Shutter serial=269096 08:51:03 Shutter LASER close 08:51:03 Received message from Camera: op=State serial=269098 08:51:03 GetSingleValue result=40 Value=cccccccc 08:51:03 SkyScan query 08:51:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:51:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:04 Parameters OK 08:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:04 Set A/D data flow result=40 08:51:04 Set A/D channel type result=40 08:51:04 Set A/D encoding result=40 08:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:04 Set channel filter=0.000000e+000 result=40 08:51:04 Config A/D Result=40 08:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:04 Get A/D filter: -9.255963e+061 result=40 08:51:04 Get A/D value=-858993460 result=40 08:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:04 Parameters OK 08:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:04 Set A/D data flow result=40 08:51:04 Set A/D channel type result=40 08:51:04 Set A/D encoding result=40 08:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:04 Set channel filter=0.000000e+000 result=40 08:51:04 Config A/D Result=40 08:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:04 Get A/D filter: -9.255963e+061 result=40 08:51:04 Get A/D value=-858993460 result=40 08:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:04 Aux= 08:51:04 Message to Camera, serial 269098 queued 08:51:41 Received message from Master: op=PointingHead serial=269111 08:51:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:51:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:51:41 Point started: ret=0 08:51:41 point_skyscan result=0 08:51:42 Check angles 08:51:42 SkyScan query 08:51:42 SkyScan query done: ret=0 az=134.415<-8961 ze=96.84<-5544 Statuses=0009 0009 08:51:42 Msec=0 True Az=134.415 Ze=96.84 Az status=0009 Ze status=0009 08:51:43 Check angles 08:51:43 SkyScan query 08:51:43 SkyScan query done: ret=0 az=130.995<-8733 ze=117.825<-4145 Statuses=0008 0009 08:51:43 Msec=750 True Az=130.995 Ze=117.825 Az status=0008 Ze status=0009 08:51:43 Check angles 08:51:43 SkyScan query 08:51:44 SkyScan query done: ret=0 az=130.995<-8733 ze=139.245<-2717 Statuses=0008 0009 08:51:44 Msec=1500 True Az=130.995 Ze=139.245 Az status=0008 Ze status=0009 08:51:44 Check angles 08:51:44 SkyScan query 08:51:45 SkyScan query done: ret=0 az=130.995<-8733 ze=160.155<-1323 Statuses=0008 0009 08:51:45 Msec=2250 True Az=130.995 Ze=160.155 Az status=0008 Ze status=0009 08:51:45 Check angles 08:51:45 SkyScan query 08:51:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.845<-23923 Statuses=0008 0009 08:51:45 Msec=3000 True Az=130.995 Ze=-178.845 Az status=0008 Ze status=0009 08:51:46 Check angles 08:51:46 SkyScan query 08:51:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.5<-22500 Statuses=0008 0009 08:51:46 Msec=3750 True Az=130.995 Ze=-157.5 Az status=0008 Ze status=0009 08:51:46 Check angles 08:51:46 SkyScan query 08:51:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 08:51:47 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 08:51:47 Check angles 08:51:47 SkyScan query 08:51:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:51:48 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:51:48 Message to Master queued w/err=0: serial=269111 error=0 08:51:53 Received message from Master: op=Filter serial=269112 08:51:53 Color wheel filter change from 0 to 0 08:51:53 FLIGetFilterPos err=0 currentPosition=0 08:51:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:53 Filter is already there-color wheel unchanged 08:51:53 Received message from Master: op=Shutter serial=269113 08:51:53 Shutter LASER close 08:51:53 Received message from Camera: op=State serial=269115 08:51:53 GetSingleValue result=40 Value=cccccccc 08:51:53 SkyScan query 08:51:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:51:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:54 Parameters OK 08:51:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:54 Set A/D data flow result=40 08:51:54 Set A/D channel type result=40 08:51:54 Set A/D encoding result=40 08:51:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:54 Set channel filter=0.000000e+000 result=40 08:51:54 Config A/D Result=40 08:51:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:54 Get A/D filter: -9.255963e+061 result=40 08:51:54 Get A/D value=-858993460 result=40 08:51:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:54 Parameters OK 08:51:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:54 Set A/D data flow result=40 08:51:54 Set A/D channel type result=40 08:51:54 Set A/D encoding result=40 08:51:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:54 Set channel filter=0.000000e+000 result=40 08:51:54 Config A/D Result=40 08:51:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:54 Get A/D filter: -9.255963e+061 result=40 08:51:54 Get A/D value=-858993460 result=40 08:51:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:54 Aux= 08:51:54 Message to Camera, serial 269115 queued 08:52:30 Received message from Master: op=PointingHead serial=269128 08:52:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:52:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:52:31 Point started: ret=0 08:52:31 point_skyscan result=0 08:52:31 Check angles 08:52:31 SkyScan query 08:52:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 08:52:32 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 08:52:32 Check angles 08:52:32 SkyScan query 08:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:52:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:52:33 Message to Master queued w/err=0: serial=269128 error=0 08:52:38 Received message from Master: op=Filter serial=269129 08:52:38 Color wheel filter change from 0 to 0 08:52:38 FLIGetFilterPos err=0 currentPosition=0 08:52:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:38 Filter is already there-color wheel unchanged 08:52:38 Received message from Master: op=Shutter serial=269130 08:52:38 Shutter LASER open 08:52:38 Received message from Camera: op=State serial=269132 08:52:38 GetSingleValue result=40 Value=cccccccc 08:52:38 SkyScan query 08:52:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:52:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:39 Parameters OK 08:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:39 Set A/D data flow result=40 08:52:39 Set A/D channel type result=40 08:52:39 Set A/D encoding result=40 08:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:39 Set channel filter=0.000000e+000 result=40 08:52:39 Config A/D Result=40 08:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:39 Get A/D filter: -9.255963e+061 result=40 08:52:39 Get A/D value=-858993460 result=40 08:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:39 Parameters OK 08:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:39 Set A/D data flow result=40 08:52:39 Set A/D channel type result=40 08:52:39 Set A/D encoding result=40 08:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:39 Set channel filter=0.000000e+000 result=40 08:52:39 Config A/D Result=40 08:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:39 Get A/D filter: -9.255963e+061 result=40 08:52:39 Get A/D value=-858993460 result=40 08:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:39 Aux= 08:52:39 Message to Camera, serial 269132 queued 08:52:47 Received message from Master: op=Shutter serial=269142 08:52:47 Shutter LASER close 08:52:48 Received message from Master: op=PointingHead serial=269146 08:52:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:52:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:52:48 Point started: ret=0 08:52:48 point_skyscan result=0 08:52:49 Check angles 08:52:49 SkyScan query 08:52:49 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.995<-21533 Statuses=0009 0009 08:52:49 Msec=0 True Az=136.305 Ze=-142.995 Az status=0009 Ze status=0009 08:52:50 Check angles 08:52:50 SkyScan query 08:52:50 SkyScan query done: ret=0 az=153.69<-10246 ze=-121.98<-20132 Statuses=0009 0009 08:52:50 Msec=750 True Az=153.69 Ze=-121.98 Az status=0009 Ze status=0009 08:52:50 Check angles 08:52:50 SkyScan query 08:52:51 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.5<-18700 Statuses=0009 0009 08:52:51 Msec=1500 True Az=171.525 Ze=-100.5 Az status=0009 Ze status=0009 08:52:51 Check angles 08:52:51 SkyScan query 08:52:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.62<-17308 Statuses=0008 0009 08:52:52 Msec=2250 True Az=176.01 Ze=-79.62 Az status=0008 Ze status=0009 08:52:52 Check angles 08:52:52 SkyScan query 08:52:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 08:52:52 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 08:52:53 Check angles 08:52:53 SkyScan query 08:52:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:52:53 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:52:53 Message to Master queued w/err=0: serial=269146 error=0 08:52:58 Received message from Master: op=Filter serial=269147 08:52:58 Color wheel filter change from 0 to 0 08:52:58 FLIGetFilterPos err=0 currentPosition=0 08:52:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:58 Filter is already there-color wheel unchanged 08:52:58 Received message from Master: op=Shutter serial=269148 08:52:58 Shutter LASER close 08:52:59 Received message from Camera: op=State serial=269150 08:52:59 GetSingleValue result=40 Value=cccccccc 08:52:59 SkyScan query 08:52:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:52:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:59 Parameters OK 08:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:59 Set A/D data flow result=40 08:52:59 Set A/D channel type result=40 08:52:59 Set A/D encoding result=40 08:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:59 Set channel filter=0.000000e+000 result=40 08:52:59 Config A/D Result=40 08:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:59 Get A/D filter: -9.255963e+061 result=40 08:52:59 Get A/D value=-858993460 result=40 08:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:59 Parameters OK 08:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:59 Set A/D data flow result=40 08:52:59 Set A/D channel type result=40 08:52:59 Set A/D encoding result=40 08:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:59 Set channel filter=0.000000e+000 result=40 08:52:59 Config A/D Result=40 08:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:59 Get A/D filter: -9.255963e+061 result=40 08:52:59 Get A/D value=-858993460 result=40 08:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:59 Aux= 08:52:59 Message to Camera, serial 269150 queued 08:53:36 Received message from Master: op=PointingHead serial=269163 08:53:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:53:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:53:36 Point started: ret=0 08:53:36 point_skyscan result=0 08:53:37 Check angles 08:53:37 SkyScan query 08:53:38 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.735<-13449 Statuses=0009 0009 08:53:38 Msec=0 True Az=152.97 Ze=-21.735 Az status=0009 Ze status=0009 08:53:38 Check angles 08:53:38 SkyScan query 08:53:38 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.69<-12046 Statuses=0009 0009 08:53:38 Msec=750 True Az=135.405 Ze=-0.69 Az status=0009 Ze status=0009 08:53:39 Check angles 08:53:39 SkyScan query 08:53:39 SkyScan query done: ret=0 az=117.855<-7857 ze=20.205<-10653 Statuses=0009 0009 08:53:39 Msec=1500 True Az=117.855 Ze=20.205 Az status=0009 Ze status=0009 08:53:39 Check angles 08:53:39 SkyScan query 08:53:40 SkyScan query done: ret=0 az=100.515<-6701 ze=41.22<-9252 Statuses=0009 0009 08:53:40 Msec=2250 True Az=100.515 Ze=41.22 Az status=0009 Ze status=0009 08:53:40 Check angles 08:53:40 SkyScan query 08:53:41 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 08:53:41 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 08:53:41 Check angles 08:53:41 SkyScan query 08:53:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:53:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:53:41 Message to Master queued w/err=0: serial=269163 error=0 08:53:46 Received message from Master: op=Filter serial=269164 08:53:46 Color wheel filter change from 0 to 0 08:53:46 FLIGetFilterPos err=0 currentPosition=0 08:53:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:46 Filter is already there-color wheel unchanged 08:53:47 Received message from Master: op=Shutter serial=269165 08:53:47 Shutter LASER close 08:53:47 Received message from Camera: op=State serial=269167 08:53:47 GetSingleValue result=40 Value=cccccccc 08:53:47 SkyScan query 08:53:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:53:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:47 Parameters OK 08:53:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:47 Set A/D data flow result=40 08:53:47 Set A/D channel type result=40 08:53:47 Set A/D encoding result=40 08:53:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:47 Set channel filter=0.000000e+000 result=40 08:53:47 Config A/D Result=40 08:53:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:47 Get A/D filter: -9.255963e+061 result=40 08:53:47 Get A/D value=-858993460 result=40 08:53:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:47 Parameters OK 08:53:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:47 Set A/D data flow result=40 08:53:47 Set A/D channel type result=40 08:53:47 Set A/D encoding result=40 08:53:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:47 Set channel filter=0.000000e+000 result=40 08:53:47 Config A/D Result=40 08:53:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:47 Get A/D filter: -9.255963e+061 result=40 08:53:47 Get A/D value=-858993460 result=40 08:53:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:47 Aux= 08:53:47 Message to Camera, serial 269167 queued 08:54:23 Received message from Master: op=PointingHead serial=269179 08:54:23 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:54:23 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:54:24 Point started: ret=0 08:54:24 point_skyscan result=0 08:54:24 Check angles 08:54:24 SkyScan query 08:54:25 SkyScan query done: ret=0 az=85.995<-5733 ze=21.96<-10536 Statuses=0008 0009 08:54:25 Msec=0 True Az=85.995 Ze=21.96 Az status=0008 Ze status=0009 08:54:25 Check angles 08:54:25 SkyScan query 08:54:26 SkyScan query done: ret=0 az=85.98<-5732 ze=1.08<-11928 Statuses=0008 0009 08:54:26 Msec=750 True Az=85.98 Ze=1.08 Az status=0008 Ze status=0009 08:54:26 Check angles 08:54:26 SkyScan query 08:54:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-19.905<-13327 Statuses=0008 0009 08:54:26 Msec=1500 True Az=85.995 Ze=-19.905 Az status=0008 Ze status=0009 08:54:27 Check angles 08:54:27 SkyScan query 08:54:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.83<-14722 Statuses=0008 0009 08:54:27 Msec=2250 True Az=85.995 Ze=-40.83 Az status=0008 Ze status=0009 08:54:27 Check angles 08:54:27 SkyScan query 08:54:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:54:28 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:54:28 Message to Master queued w/err=0: serial=269179 error=0 08:54:33 Received message from Master: op=Filter serial=269180 08:54:33 Color wheel filter change from 0 to 0 08:54:33 FLIGetFilterPos err=0 currentPosition=0 08:54:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:33 Filter is already there-color wheel unchanged 08:54:33 Received message from Master: op=Shutter serial=269181 08:54:33 Shutter LASER close 08:54:33 Received message from Camera: op=State serial=269183 08:54:33 GetSingleValue result=40 Value=cccccccc 08:54:33 SkyScan query 08:54:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:54:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:34 Parameters OK 08:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:34 Set A/D data flow result=40 08:54:34 Set A/D channel type result=40 08:54:34 Set A/D encoding result=40 08:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:34 Set channel filter=0.000000e+000 result=40 08:54:34 Config A/D Result=40 08:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:34 Get A/D filter: -9.255963e+061 result=40 08:54:34 Get A/D value=-858993460 result=40 08:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:34 Parameters OK 08:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:34 Set A/D data flow result=40 08:54:34 Set A/D channel type result=40 08:54:34 Set A/D encoding result=40 08:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:34 Set channel filter=0.000000e+000 result=40 08:54:34 Config A/D Result=40 08:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:34 Get A/D filter: -9.255963e+061 result=40 08:54:34 Get A/D value=-858993460 result=40 08:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:34 Aux= 08:54:34 Message to Camera, serial 269183 queued 08:55:11 Received message from Master: op=PointingHead serial=269196 08:55:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:55:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:55:11 Point started: ret=0 08:55:11 point_skyscan result=0 08:55:12 Check angles 08:55:12 SkyScan query 08:55:12 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.15<-17410 Statuses=0009 0009 08:55:12 Msec=0 True Az=108.885 Ze=-81.15 Az status=0009 Ze status=0009 08:55:12 Check angles 08:55:12 SkyScan query 08:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 08:55:13 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 08:55:13 Check angles 08:55:13 SkyScan query 08:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 08:55:14 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 08:55:14 Check angles 08:55:14 SkyScan query 08:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 08:55:14 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 08:55:15 Check angles 08:55:15 SkyScan query 08:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.435<-23029 Statuses=0008 0009 08:55:15 Msec=3000 True Az=112.995 Ze=-165.435 Az status=0008 Ze status=0009 08:55:15 Check angles 08:55:15 SkyScan query [UTC 2018-12-19 08:55:16] 08:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:55:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:55:16 Message to Master queued w/err=0: serial=269196 error=0 08:55:21 Received message from Master: op=Filter serial=269197 08:55:21 Color wheel filter change from 0 to 0 08:55:21 FLIGetFilterPos err=0 currentPosition=0 08:55:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:21 Filter is already there-color wheel unchanged 08:55:21 Received message from Master: op=Shutter serial=269198 08:55:21 Shutter LASER open 08:55:21 Received message from Camera: op=State serial=269200 08:55:21 GetSingleValue result=40 Value=cccccccc 08:55:21 SkyScan query 08:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:55:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:22 Parameters OK 08:55:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:22 Set A/D data flow result=40 08:55:22 Set A/D channel type result=40 08:55:22 Set A/D encoding result=40 08:55:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:22 Set channel filter=0.000000e+000 result=40 08:55:22 Config A/D Result=40 08:55:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:22 Get A/D filter: -9.255963e+061 result=40 08:55:22 Get A/D value=-858993460 result=40 08:55:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:22 Parameters OK 08:55:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:22 Set A/D data flow result=40 08:55:22 Set A/D channel type result=40 08:55:22 Set A/D encoding result=40 08:55:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:22 Set channel filter=0.000000e+000 result=40 08:55:22 Config A/D Result=40 08:55:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:22 Get A/D filter: -9.255963e+061 result=40 08:55:22 Get A/D value=-858993460 result=40 08:55:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:22 Aux= 08:55:22 Message to Camera, serial 269200 queued 08:55:30 Received message from Master: op=Shutter serial=269210 08:55:30 Shutter LASER close 08:55:31 Received message from Master: op=PointingHead serial=269214 08:55:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:55:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:55:31 Point started: ret=0 08:55:31 point_skyscan result=0 08:55:32 Check angles 08:55:32 SkyScan query 08:55:32 SkyScan query done: ret=0 az=90.165<-6011 ze=157.455<-1503 Statuses=0009 0009 08:55:32 Msec=0 True Az=90.165 Ze=157.455 Az status=0009 Ze status=0009 08:55:33 Check angles 08:55:33 SkyScan query 08:55:33 SkyScan query done: ret=0 az=72.645<-4843 ze=136.485<-2901 Statuses=0009 0009 08:55:33 Msec=750 True Az=72.645 Ze=136.485 Az status=0009 Ze status=0009 08:55:33 Check angles 08:55:33 SkyScan query 08:55:34 SkyScan query done: ret=0 az=55.245<-3683 ze=115.575<-4295 Statuses=0009 0009 08:55:34 Msec=1500 True Az=55.245 Ze=115.575 Az status=0009 Ze status=0009 08:55:34 Check angles 08:55:34 SkyScan query 08:55:35 SkyScan query done: ret=0 az=41.01<-2734 ze=94.605<-5693 Statuses=0009 0009 08:55:35 Msec=2250 True Az=41.01 Ze=94.605 Az status=0009 Ze status=0009 08:55:35 Check angles 08:55:35 SkyScan query 08:55:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 08:55:35 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 08:55:36 Check angles 08:55:36 SkyScan query 08:55:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 08:55:36 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 08:55:36 Check angles 08:55:36 SkyScan query 08:55:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:55:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:55:37 Message to Master queued w/err=0: serial=269214 error=0 08:55:42 Received message from Master: op=Filter serial=269215 08:55:42 Color wheel filter change from 0 to 0 08:55:42 FLIGetFilterPos err=0 currentPosition=0 08:55:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:42 Filter is already there-color wheel unchanged 08:55:42 Received message from Master: op=Shutter serial=269216 08:55:42 Shutter LASER close 08:55:42 Received message from Camera: op=State serial=269218 08:55:42 GetSingleValue result=40 Value=cccccccc 08:55:42 SkyScan query 08:55:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:55:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:43 Parameters OK 08:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:43 Set A/D data flow result=40 08:55:43 Set A/D channel type result=40 08:55:43 Set A/D encoding result=40 08:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:43 Set channel filter=0.000000e+000 result=40 08:55:43 Config A/D Result=40 08:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:43 Get A/D filter: -9.255963e+061 result=40 08:55:43 Get A/D value=-858993460 result=40 08:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:43 Parameters OK 08:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:43 Set A/D data flow result=40 08:55:43 Set A/D channel type result=40 08:55:43 Set A/D encoding result=40 08:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:43 Set channel filter=0.000000e+000 result=40 08:55:43 Config A/D Result=40 08:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:43 Get A/D filter: -9.255963e+061 result=40 08:55:43 Get A/D value=-858993460 result=40 08:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:43 Aux= 08:55:43 Message to Camera, serial 269218 queued [UTC 2018-12-19 08:55:52] 08:56:20 Received message from Master: op=PointingHead serial=269231 08:56:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:56:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:56:20 Point started: ret=0 08:56:20 point_skyscan result=0 08:56:21 Check angles 08:56:21 SkyScan query 08:56:21 SkyScan query done: ret=0 az=63.78<-4252 ze=66.525<-7565 Statuses=0009 0008 08:56:21 Msec=0 True Az=63.78 Ze=66.525 Az status=0009 Ze status=0008 08:56:22 Check angles 08:56:22 SkyScan query 08:56:22 SkyScan query done: ret=0 az=81.285<-5419 ze=66.51<-7566 Statuses=0009 0008 08:56:22 Msec=750 True Az=81.285 Ze=66.51 Az status=0009 Ze status=0008 08:56:22 Check angles 08:56:22 SkyScan query 08:56:23 SkyScan query done: ret=0 az=99.12<-6608 ze=66.495<-7567 Statuses=0009 0008 08:56:23 Msec=1500 True Az=99.12 Ze=66.495 Az status=0009 Ze status=0008 08:56:23 Check angles 08:56:23 SkyScan query 08:56:24 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 08:56:24 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 08:56:24 Check angles 08:56:24 SkyScan query 08:56:24 SkyScan query done: ret=0 az=134.385<-8959 ze=66.495<-7567 Statuses=0009 0008 08:56:24 Msec=3000 True Az=134.385 Ze=66.495 Az status=0009 Ze status=0008 08:56:25 Check angles 08:56:25 SkyScan query 08:56:25 SkyScan query done: ret=0 az=151.8<-10120 ze=66.495<-7567 Statuses=0009 0008 08:56:25 Msec=3750 True Az=151.8 Ze=66.495 Az status=0009 Ze status=0008 08:56:25 Check angles 08:56:25 SkyScan query 08:56:26 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:56:26 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:56:26 Message to Master queued w/err=0: serial=269231 error=0 08:56:31 Received message from Master: op=Filter serial=269232 08:56:31 Color wheel filter change from 0 to 0 08:56:31 FLIGetFilterPos err=0 currentPosition=0 08:56:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:31 Filter is already there-color wheel unchanged 08:56:31 Received message from Master: op=Shutter serial=269233 08:56:31 Shutter LASER close 08:56:31 Received message from Camera: op=State serial=269235 08:56:31 GetSingleValue result=40 Value=cccccccc 08:56:31 SkyScan query 08:56:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:56:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:32 Parameters OK 08:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:32 Set A/D data flow result=40 08:56:32 Set A/D channel type result=40 08:56:32 Set A/D encoding result=40 08:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:32 Set channel filter=0.000000e+000 result=40 08:56:32 Config A/D Result=40 08:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:32 Get A/D filter: -9.255963e+061 result=40 08:56:32 Get A/D value=-858993460 result=40 08:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:32 Parameters OK 08:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:32 Set A/D data flow result=40 08:56:32 Set A/D channel type result=40 08:56:32 Set A/D encoding result=40 08:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:32 Set channel filter=0.000000e+000 result=40 08:56:32 Config A/D Result=40 08:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:32 Get A/D filter: -9.255963e+061 result=40 08:56:32 Get A/D value=-858993460 result=40 08:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:32 Aux= 08:56:32 Message to Camera, serial 269235 queued 08:57:09 Received message from Master: op=PointingHead serial=269248 08:57:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:57:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:57:09 Point started: ret=0 08:57:09 point_skyscan result=0 08:57:10 Check angles 08:57:10 SkyScan query 08:57:10 SkyScan query done: ret=0 az=134.415<-8961 ze=96.84<-5544 Statuses=0009 0009 08:57:10 Msec=0 True Az=134.415 Ze=96.84 Az status=0009 Ze status=0009 08:57:11 Check angles 08:57:11 SkyScan query 08:57:11 SkyScan query done: ret=0 az=130.995<-8733 ze=117.81<-4146 Statuses=0008 0009 08:57:11 Msec=750 True Az=130.995 Ze=117.81 Az status=0008 Ze status=0009 08:57:11 Check angles 08:57:11 SkyScan query 08:57:12 SkyScan query done: ret=0 az=130.995<-8733 ze=138.72<-2752 Statuses=0008 0009 08:57:12 Msec=1500 True Az=130.995 Ze=138.72 Az status=0008 Ze status=0009 08:57:12 Check angles 08:57:12 SkyScan query 08:57:13 SkyScan query done: ret=0 az=130.995<-8733 ze=159.69<-1354 Statuses=0008 0009 08:57:13 Msec=2250 True Az=130.995 Ze=159.69 Az status=0008 Ze status=0009 08:57:13 Check angles 08:57:13 SkyScan query 08:57:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.34<-23956 Statuses=0008 0009 08:57:13 Msec=3000 True Az=130.995 Ze=-179.34 Az status=0008 Ze status=0009 08:57:14 Check angles 08:57:14 SkyScan query 08:57:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.415<-22561 Statuses=0008 0009 08:57:14 Msec=3750 True Az=130.995 Ze=-158.415 Az status=0008 Ze status=0009 08:57:14 Check angles 08:57:14 SkyScan query 08:57:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 08:57:15 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 08:57:15 Check angles 08:57:15 SkyScan query 08:57:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:57:16 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:57:16 Message to Master queued w/err=0: serial=269248 error=0 08:57:21 Received message from Master: op=Filter serial=269249 08:57:21 Color wheel filter change from 0 to 0 08:57:21 FLIGetFilterPos err=0 currentPosition=0 08:57:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:21 Filter is already there-color wheel unchanged 08:57:21 Received message from Master: op=Shutter serial=269250 08:57:21 Shutter LASER close 08:57:21 Received message from Camera: op=State serial=269252 08:57:21 GetSingleValue result=40 Value=cccccccc 08:57:21 SkyScan query 08:57:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:57:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:21 Parameters OK 08:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:21 Set A/D data flow result=40 08:57:21 Set A/D channel type result=40 08:57:21 Set A/D encoding result=40 08:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:21 Set channel filter=0.000000e+000 result=40 08:57:21 Config A/D Result=40 08:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:21 Get A/D filter: -9.255963e+061 result=40 08:57:21 Get A/D value=-858993460 result=40 08:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:21 Parameters OK 08:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:21 Set A/D data flow result=40 08:57:21 Set A/D channel type result=40 08:57:21 Set A/D encoding result=40 08:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:21 Set channel filter=0.000000e+000 result=40 08:57:21 Config A/D Result=40 08:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:21 Get A/D filter: -9.255963e+061 result=40 08:57:21 Get A/D value=-858993460 result=40 08:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:21 Aux= 08:57:21 Message to Camera, serial 269252 queued 08:57:58 Received message from Master: op=PointingHead serial=269265 08:57:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:57:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:57:59 Point started: ret=0 08:57:59 point_skyscan result=0 08:57:59 Check angles 08:57:59 SkyScan query 08:58:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 08:58:00 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 08:58:00 Check angles 08:58:00 SkyScan query 08:58:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:58:01 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:58:01 Message to Master queued w/err=0: serial=269265 error=0 08:58:06 Received message from Master: op=Filter serial=269266 08:58:06 Color wheel filter change from 0 to 0 08:58:06 FLIGetFilterPos err=0 currentPosition=0 08:58:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:06 Filter is already there-color wheel unchanged 08:58:06 Received message from Master: op=Shutter serial=269267 08:58:06 Shutter LASER open 08:58:06 Received message from Camera: op=State serial=269269 08:58:06 GetSingleValue result=40 Value=cccccccc 08:58:06 SkyScan query 08:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:58:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:07 Parameters OK 08:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:07 Set A/D data flow result=40 08:58:07 Set A/D channel type result=40 08:58:07 Set A/D encoding result=40 08:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:07 Set channel filter=0.000000e+000 result=40 08:58:07 Config A/D Result=40 08:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:07 Get A/D filter: -9.255963e+061 result=40 08:58:07 Get A/D value=-858993460 result=40 08:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:07 Parameters OK 08:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:07 Set A/D data flow result=40 08:58:07 Set A/D channel type result=40 08:58:07 Set A/D encoding result=40 08:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:07 Set channel filter=0.000000e+000 result=40 08:58:07 Config A/D Result=40 08:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:07 Get A/D filter: -9.255963e+061 result=40 08:58:07 Get A/D value=-858993460 result=40 08:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:07 Aux= 08:58:07 Message to Camera, serial 269269 queued 08:58:15 Received message from Master: op=Shutter serial=269279 08:58:15 Shutter LASER close 08:58:16 Received message from Master: op=PointingHead serial=269283 08:58:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:58:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:58:16 Point started: ret=0 08:58:16 point_skyscan result=0 08:58:17 Check angles 08:58:17 SkyScan query 08:58:17 SkyScan query done: ret=0 az=136.32<-9088 ze=-142.95<-21530 Statuses=0009 0009 08:58:17 Msec=0 True Az=136.32 Ze=-142.95 Az status=0009 Ze status=0009 08:58:18 Check angles 08:58:18 SkyScan query 08:58:18 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.935<-20129 Statuses=0009 0009 08:58:18 Msec=750 True Az=153.765 Ze=-121.935 Az status=0009 Ze status=0009 08:58:18 Check angles 08:58:18 SkyScan query 08:58:19 SkyScan query done: ret=0 az=171.585<-11439 ze=-100.47<-18698 Statuses=0009 0009 08:58:19 Msec=1500 True Az=171.585 Ze=-100.47 Az status=0009 Ze status=0009 08:58:19 Check angles 08:58:19 SkyScan query 08:58:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.575<-17305 Statuses=0008 0009 08:58:20 Msec=2250 True Az=176.01 Ze=-79.575 Az status=0008 Ze status=0009 08:58:20 Check angles 08:58:20 SkyScan query 08:58:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.59<-15906 Statuses=0008 0009 08:58:20 Msec=3000 True Az=176.01 Ze=-58.59 Az status=0008 Ze status=0009 08:58:21 Check angles 08:58:21 SkyScan query 08:58:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:58:21 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:58:21 Message to Master queued w/err=0: serial=269283 error=0 08:58:26 Received message from Master: op=Filter serial=269284 08:58:26 Color wheel filter change from 0 to 0 08:58:26 FLIGetFilterPos err=0 currentPosition=0 08:58:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:26 Filter is already there-color wheel unchanged 08:58:26 Received message from Master: op=Shutter serial=269285 08:58:26 Shutter LASER close 08:58:27 Received message from Camera: op=State serial=269287 08:58:27 GetSingleValue result=40 Value=cccccccc 08:58:27 SkyScan query 08:58:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:58:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:27 Parameters OK 08:58:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:27 Set A/D data flow result=40 08:58:27 Set A/D channel type result=40 08:58:27 Set A/D encoding result=40 08:58:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:27 Set channel filter=0.000000e+000 result=40 08:58:27 Config A/D Result=40 08:58:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:27 Get A/D filter: -9.255963e+061 result=40 08:58:27 Get A/D value=-858993460 result=40 08:58:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:27 Parameters OK 08:58:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:27 Set A/D data flow result=40 08:58:27 Set A/D channel type result=40 08:58:27 Set A/D encoding result=40 08:58:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:27 Set channel filter=0.000000e+000 result=40 08:58:27 Config A/D Result=40 08:58:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:27 Get A/D filter: -9.255963e+061 result=40 08:58:27 Get A/D value=-858993460 result=40 08:58:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:27 Aux= 08:58:27 Message to Camera, serial 269287 queued 08:59:03 Received message from Master: op=PointingHead serial=269299 08:59:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:59:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:59:03 Point started: ret=0 08:59:03 point_skyscan result=0 08:59:04 Check angles 08:59:04 SkyScan query 08:59:05 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.165<-13411 Statuses=0009 0009 08:59:05 Msec=0 True Az=152.58 Ze=-21.165 Az status=0009 Ze status=0009 08:59:05 Check angles 08:59:05 SkyScan query 08:59:05 SkyScan query done: ret=0 az=134.64<-8976 ze=0.165<-11989 Statuses=0009 0009 08:59:05 Msec=750 True Az=134.64 Ze=0.165 Az status=0009 Ze status=0009 08:59:06 Check angles 08:59:06 SkyScan query 08:59:06 SkyScan query done: ret=0 az=117.18<-7812 ze=21.21<-10586 Statuses=0009 0009 08:59:06 Msec=1500 True Az=117.18 Ze=21.21 Az status=0009 Ze status=0009 08:59:06 Check angles 08:59:06 SkyScan query 08:59:07 SkyScan query done: ret=0 az=99.795<-6653 ze=42.09<-9194 Statuses=0009 0009 08:59:07 Msec=2250 True Az=99.795 Ze=42.09 Az status=0009 Ze status=0009 08:59:07 Check angles 08:59:07 SkyScan query 08:59:08 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 08:59:08 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 08:59:08 Check angles 08:59:08 SkyScan query 08:59:08 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 08:59:08 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 08:59:08 Message to Master queued w/err=0: serial=269299 error=0 08:59:13 Received message from Master: op=Filter serial=269300 08:59:13 Color wheel filter change from 0 to 0 08:59:13 FLIGetFilterPos err=0 currentPosition=0 08:59:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:13 Filter is already there-color wheel unchanged 08:59:14 Received message from Master: op=Shutter serial=269301 08:59:14 Shutter LASER close 08:59:14 Received message from Camera: op=State serial=269303 08:59:14 GetSingleValue result=40 Value=cccccccc 08:59:14 SkyScan query 08:59:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:59:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:14 Parameters OK 08:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:14 Set A/D data flow result=40 08:59:14 Set A/D channel type result=40 08:59:14 Set A/D encoding result=40 08:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:14 Set channel filter=0.000000e+000 result=40 08:59:14 Config A/D Result=40 08:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:14 Get A/D filter: -9.255963e+061 result=40 08:59:14 Get A/D value=-858993460 result=40 08:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:14 Parameters OK 08:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:14 Set A/D data flow result=40 08:59:14 Set A/D channel type result=40 08:59:14 Set A/D encoding result=40 08:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:14 Set channel filter=0.000000e+000 result=40 08:59:14 Config A/D Result=40 08:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:14 Get A/D filter: -9.255963e+061 result=40 08:59:14 Get A/D value=-858993460 result=40 08:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:14 Aux= 08:59:14 Message to Camera, serial 269303 queued 08:59:51 Received message from Master: op=PointingHead serial=269316 08:59:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:59:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:59:52 Point started: ret=0 08:59:52 point_skyscan result=0 08:59:52 Check angles 08:59:52 SkyScan query 08:59:53 SkyScan query done: ret=0 az=85.995<-5733 ze=21.165<-10589 Statuses=0008 0009 08:59:53 Msec=0 True Az=85.995 Ze=21.165 Az status=0008 Ze status=0009 08:59:53 Check angles 08:59:53 SkyScan query 08:59:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.27<-12018 Statuses=0008 0009 08:59:54 Msec=750 True Az=85.995 Ze=-0.27 Az status=0008 Ze status=0009 08:59:54 Check angles 08:59:54 SkyScan query 08:59:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.18<-13412 Statuses=0008 0009 08:59:54 Msec=1500 True Az=85.995 Ze=-21.18 Az status=0008 Ze status=0009 08:59:55 Check angles 08:59:55 SkyScan query 08:59:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.195<-14813 Statuses=0008 0009 08:59:55 Msec=2250 True Az=85.995 Ze=-42.195 Az status=0008 Ze status=0009 08:59:55 Check angles 08:59:55 SkyScan query 08:59:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 08:59:56 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 08:59:56 Message to Master queued w/err=0: serial=269316 error=0 09:00:01 Received message from Master: op=Filter serial=269317 09:00:01 Color wheel filter change from 0 to 0 09:00:01 FLIGetFilterPos err=0 currentPosition=0 09:00:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:01 Filter is already there-color wheel unchanged 09:00:01 Received message from Master: op=Shutter serial=269318 09:00:01 Shutter LASER close 09:00:01 Received message from Camera: op=State serial=269320 09:00:01 GetSingleValue result=40 Value=cccccccc 09:00:01 SkyScan query 09:00:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:00:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:02 Parameters OK 09:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:02 Set A/D data flow result=40 09:00:02 Set A/D channel type result=40 09:00:02 Set A/D encoding result=40 09:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:02 Set channel filter=0.000000e+000 result=40 09:00:02 Config A/D Result=40 09:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:02 Get A/D filter: -9.255963e+061 result=40 09:00:02 Get A/D value=-858993460 result=40 09:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:02 Parameters OK 09:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:02 Set A/D data flow result=40 09:00:02 Set A/D channel type result=40 09:00:02 Set A/D encoding result=40 09:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:02 Set channel filter=0.000000e+000 result=40 09:00:02 Config A/D Result=40 09:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:02 Get A/D filter: -9.255963e+061 result=40 09:00:02 Get A/D value=-858993460 result=40 09:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:02 Aux= 09:00:02 Message to Camera, serial 269320 queued 09:00:39 Received message from Master: op=PointingHead serial=269333 09:00:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:00:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:00:39 Point started: ret=0 09:00:39 point_skyscan result=0 09:00:40 Check angles 09:00:40 SkyScan query 09:00:40 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.12<-17408 Statuses=0009 0009 09:00:40 Msec=0 True Az=108.795 Ze=-81.12 Az status=0009 Ze status=0009 09:00:40 Check angles 09:00:40 SkyScan query 09:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 09:00:41 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 09:00:41 Check angles 09:00:41 SkyScan query 09:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 09:00:42 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 09:00:42 Check angles 09:00:42 SkyScan query 09:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 09:00:42 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 09:00:43 Check angles 09:00:43 SkyScan query 09:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 09:00:43 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 09:00:43 Check angles 09:00:43 SkyScan query 09:00:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:00:44 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:00:44 Message to Master queued w/err=0: serial=269333 error=0 09:00:49 Received message from Master: op=Filter serial=269334 09:00:49 Color wheel filter change from 0 to 0 09:00:49 FLIGetFilterPos err=0 currentPosition=0 09:00:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:49 Filter is already there-color wheel unchanged 09:00:49 Received message from Master: op=Shutter serial=269335 09:00:49 Shutter LASER open 09:00:49 Received message from Camera: op=State serial=269337 09:00:49 GetSingleValue result=40 Value=cccccccc 09:00:49 SkyScan query 09:00:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:00:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:50 Parameters OK 09:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:50 Set A/D data flow result=40 09:00:50 Set A/D channel type result=40 09:00:50 Set A/D encoding result=40 09:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:50 Set channel filter=0.000000e+000 result=40 09:00:50 Config A/D Result=40 09:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:50 Get A/D filter: -9.255963e+061 result=40 09:00:50 Get A/D value=-858993460 result=40 09:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:50 Parameters OK 09:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:50 Set A/D data flow result=40 09:00:50 Set A/D channel type result=40 09:00:50 Set A/D encoding result=40 09:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:50 Set channel filter=0.000000e+000 result=40 09:00:50 Config A/D Result=40 09:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:50 Get A/D filter: -9.255963e+061 result=40 09:00:50 Get A/D value=-858993460 result=40 09:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:50 Aux= 09:00:50 Message to Camera, serial 269337 queued 09:00:58 Received message from Master: op=Shutter serial=269347 09:00:58 Shutter LASER close 09:00:59 Received message from Master: op=PointingHead serial=269351 09:00:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:00:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:00:59 Point started: ret=0 09:00:59 point_skyscan result=0 09:01:00 Check angles 09:01:00 SkyScan query 09:01:00 SkyScan query done: ret=0 az=90.18<-6012 ze=157.5<-1500 Statuses=0009 0009 09:01:00 Msec=0 True Az=90.18 Ze=157.5 Az status=0009 Ze status=0009 09:01:01 Check angles 09:01:01 SkyScan query 09:01:01 SkyScan query done: ret=0 az=72.705<-4847 ze=136.53<-2898 Statuses=0009 0009 09:01:01 Msec=750 True Az=72.705 Ze=136.53 Az status=0009 Ze status=0009 09:01:01 Check angles 09:01:01 SkyScan query 09:01:02 SkyScan query done: ret=0 az=55.305<-3687 ze=115.635<-4291 Statuses=0009 0009 09:01:02 Msec=1500 True Az=55.305 Ze=115.635 Az status=0009 Ze status=0009 09:01:02 Check angles 09:01:02 SkyScan query 09:01:03 SkyScan query done: ret=0 az=41.01<-2734 ze=94.665<-5689 Statuses=0009 0009 09:01:03 Msec=2250 True Az=41.01 Ze=94.665 Az status=0009 Ze status=0009 09:01:03 Check angles 09:01:03 SkyScan query 09:01:03 SkyScan query done: ret=0 az=40.995<-2733 ze=73.71<-7086 Statuses=0008 0009 09:01:03 Msec=3000 True Az=40.995 Ze=73.71 Az status=0008 Ze status=0009 09:01:04 Check angles 09:01:04 SkyScan query 09:01:04 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 09:01:04 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 09:01:04 Check angles 09:01:04 SkyScan query 09:01:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:01:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:01:05 Message to Master queued w/err=0: serial=269351 error=0 09:01:10 Received message from Master: op=Filter serial=269352 09:01:10 Color wheel filter change from 0 to 0 09:01:10 FLIGetFilterPos err=0 currentPosition=0 09:01:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:10 Filter is already there-color wheel unchanged 09:01:10 Received message from Master: op=Shutter serial=269353 09:01:10 Shutter LASER close 09:01:10 Received message from Camera: op=State serial=269355 09:01:10 GetSingleValue result=40 Value=cccccccc 09:01:10 SkyScan query 09:01:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:01:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:11 Parameters OK 09:01:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:11 Set A/D data flow result=40 09:01:11 Set A/D channel type result=40 09:01:11 Set A/D encoding result=40 09:01:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:11 Set channel filter=0.000000e+000 result=40 09:01:11 Config A/D Result=40 09:01:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:11 Get A/D filter: -9.255963e+061 result=40 09:01:11 Get A/D value=-858993460 result=40 09:01:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:11 Parameters OK 09:01:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:11 Set A/D data flow result=40 09:01:11 Set A/D channel type result=40 09:01:11 Set A/D encoding result=40 09:01:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:11 Set channel filter=0.000000e+000 result=40 09:01:11 Config A/D Result=40 09:01:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:11 Get A/D filter: -9.255963e+061 result=40 09:01:11 Get A/D value=-858993460 result=40 09:01:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:11 Aux= 09:01:11 Message to Camera, serial 269355 queued 09:01:48 Received message from Master: op=PointingHead serial=269368 09:01:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:01:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:01:48 Point started: ret=0 09:01:48 point_skyscan result=0 09:01:49 Check angles 09:01:49 SkyScan query 09:01:49 SkyScan query done: ret=0 az=64.005<-4267 ze=66.54<-7564 Statuses=0009 0008 09:01:49 Msec=0 True Az=64.005 Ze=66.54 Az status=0009 Ze status=0008 09:01:50 Check angles 09:01:50 SkyScan query 09:01:50 SkyScan query done: ret=0 az=81.795<-5453 ze=66.525<-7565 Statuses=0009 0008 09:01:50 Msec=750 True Az=81.795 Ze=66.525 Az status=0009 Ze status=0008 09:01:50 Check angles 09:01:50 SkyScan query 09:01:51 SkyScan query done: ret=0 az=99.75<-6650 ze=66.525<-7565 Statuses=0009 0008 09:01:51 Msec=1500 True Az=99.75 Ze=66.525 Az status=0009 Ze status=0008 09:01:51 Check angles 09:01:51 SkyScan query 09:01:52 SkyScan query done: ret=0 az=117.63<-7842 ze=66.51<-7566 Statuses=0009 0008 09:01:52 Msec=2250 True Az=117.63 Ze=66.51 Az status=0009 Ze status=0008 09:01:52 Check angles 09:01:52 SkyScan query 09:01:52 SkyScan query done: ret=0 az=134.985<-8999 ze=66.51<-7566 Statuses=0009 0008 09:01:52 Msec=3000 True Az=134.985 Ze=66.51 Az status=0009 Ze status=0008 09:01:53 Check angles 09:01:53 SkyScan query 09:01:53 SkyScan query done: ret=0 az=152.37<-10158 ze=66.51<-7566 Statuses=0009 0008 09:01:53 Msec=3750 True Az=152.37 Ze=66.51 Az status=0009 Ze status=0008 09:01:53 Check angles 09:01:53 SkyScan query 09:01:54 SkyScan query done: ret=0 az=158.025<-10535 ze=66.51<-7566 Statuses=0008 0008 09:01:54 Msec=4500 True Az=158.025 Ze=66.51 Az status=0008 Ze status=0008 09:01:54 Message to Master queued w/err=0: serial=269368 error=0 09:01:59 Received message from Master: op=Filter serial=269369 09:01:59 Color wheel filter change from 0 to 0 09:01:59 FLIGetFilterPos err=0 currentPosition=0 09:01:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:59 Filter is already there-color wheel unchanged 09:01:59 Received message from Master: op=Shutter serial=269370 09:01:59 Shutter LASER close 09:01:59 Received message from Camera: op=State serial=269372 09:01:59 GetSingleValue result=40 Value=cccccccc 09:01:59 SkyScan query 09:02:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 09:02:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:00 Parameters OK 09:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:00 Set A/D data flow result=40 09:02:00 Set A/D channel type result=40 09:02:00 Set A/D encoding result=40 09:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:00 Set channel filter=0.000000e+000 result=40 09:02:00 Config A/D Result=40 09:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:00 Get A/D filter: -9.255963e+061 result=40 09:02:00 Get A/D value=-858993460 result=40 09:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:00 Parameters OK 09:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:00 Set A/D data flow result=40 09:02:00 Set A/D channel type result=40 09:02:00 Set A/D encoding result=40 09:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:00 Set channel filter=0.000000e+000 result=40 09:02:00 Config A/D Result=40 09:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:00 Get A/D filter: -9.255963e+061 result=40 09:02:00 Get A/D value=-858993460 result=40 09:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:00 Aux= 09:02:00 Message to Camera, serial 269372 queued 09:02:37 Received message from Master: op=PointingHead serial=269385 09:02:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:02:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:02:37 Point started: ret=0 09:02:37 point_skyscan result=0 09:02:38 Check angles 09:02:38 SkyScan query 09:02:39 SkyScan query done: ret=0 az=134.565<-8971 ze=96.75<-5550 Statuses=0009 0009 09:02:39 Msec=0 True Az=134.565 Ze=96.75 Az status=0009 Ze status=0009 09:02:39 Check angles 09:02:39 SkyScan query 09:02:39 SkyScan query done: ret=0 az=130.995<-8733 ze=118.155<-4123 Statuses=0008 0009 09:02:39 Msec=750 True Az=130.995 Ze=118.155 Az status=0008 Ze status=0009 09:02:39 Check angles 09:02:39 SkyScan query 09:02:40 SkyScan query done: ret=0 az=130.995<-8733 ze=139.17<-2722 Statuses=0008 0009 09:02:40 Msec=1500 True Az=130.995 Ze=139.17 Az status=0008 Ze status=0009 09:02:40 Check angles 09:02:40 SkyScan query 09:02:41 SkyScan query done: ret=0 az=130.995<-8733 ze=160.08<-1328 Statuses=0008 0009 09:02:41 Msec=2250 True Az=130.995 Ze=160.08 Az status=0008 Ze status=0009 09:02:41 Check angles 09:02:41 SkyScan query 09:02:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.515<-23901 Statuses=0008 0009 09:02:42 Msec=3000 True Az=130.995 Ze=-178.515 Az status=0008 Ze status=0009 09:02:42 Check angles 09:02:42 SkyScan query 09:02:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.125<-22475 Statuses=0008 0009 09:02:42 Msec=3750 True Az=130.995 Ze=-157.125 Az status=0008 Ze status=0009 09:02:43 Check angles 09:02:43 SkyScan query 09:02:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 09:02:43 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 09:02:43 Check angles 09:02:43 SkyScan query 09:02:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:02:44 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:02:44 Message to Master queued w/err=0: serial=269385 error=0 09:02:49 Received message from Master: op=Filter serial=269386 09:02:49 Color wheel filter change from 0 to 0 09:02:49 FLIGetFilterPos err=0 currentPosition=0 09:02:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:49 Filter is already there-color wheel unchanged 09:02:49 Received message from Master: op=Shutter serial=269387 09:02:49 Shutter LASER close 09:02:49 Received message from Camera: op=State serial=269389 09:02:49 GetSingleValue result=40 Value=cccccccc 09:02:49 SkyScan query 09:02:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:02:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:50 Parameters OK 09:02:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:50 Set A/D data flow result=40 09:02:50 Set A/D channel type result=40 09:02:50 Set A/D encoding result=40 09:02:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:50 Set channel filter=0.000000e+000 result=40 09:02:50 Config A/D Result=40 09:02:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:50 Get A/D filter: -9.255963e+061 result=40 09:02:50 Get A/D value=-858993460 result=40 09:02:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:50 Parameters OK 09:02:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:50 Set A/D data flow result=40 09:02:50 Set A/D channel type result=40 09:02:50 Set A/D encoding result=40 09:02:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:50 Set channel filter=0.000000e+000 result=40 09:02:50 Config A/D Result=40 09:02:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:50 Get A/D filter: -9.255963e+061 result=40 09:02:50 Get A/D value=-858993460 result=40 09:02:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:50 Aux= 09:02:50 Message to Camera, serial 269389 queued 09:03:26 Received message from Master: op=PointingHead serial=269402 09:03:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:03:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:03:27 Point started: ret=0 09:03:27 point_skyscan result=0 09:03:28 Check angles 09:03:28 SkyScan query 09:03:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 09:03:28 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 09:03:28 Check angles 09:03:28 SkyScan query 09:03:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:03:29 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:03:29 Message to Master queued w/err=0: serial=269402 error=0 09:03:34 Received message from Master: op=Filter serial=269403 09:03:34 Color wheel filter change from 0 to 0 09:03:34 FLIGetFilterPos err=0 currentPosition=0 09:03:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:34 Filter is already there-color wheel unchanged 09:03:34 Received message from Master: op=Shutter serial=269404 09:03:34 Shutter LASER open 09:03:34 Received message from Camera: op=State serial=269406 09:03:34 GetSingleValue result=40 Value=cccccccc 09:03:34 SkyScan query 09:03:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:03:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:35 Parameters OK 09:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:35 Set A/D data flow result=40 09:03:35 Set A/D channel type result=40 09:03:35 Set A/D encoding result=40 09:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:35 Set channel filter=0.000000e+000 result=40 09:03:35 Config A/D Result=40 09:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:35 Get A/D filter: -9.255963e+061 result=40 09:03:35 Get A/D value=-858993460 result=40 09:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:35 Parameters OK 09:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:35 Set A/D data flow result=40 09:03:35 Set A/D channel type result=40 09:03:35 Set A/D encoding result=40 09:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:35 Set channel filter=0.000000e+000 result=40 09:03:35 Config A/D Result=40 09:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:35 Get A/D filter: -9.255963e+061 result=40 09:03:35 Get A/D value=-858993460 result=40 09:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:35 Aux= 09:03:35 Message to Camera, serial 269406 queued 09:03:43 Received message from Master: op=Shutter serial=269416 09:03:43 Shutter LASER close 09:03:44 Received message from Master: op=PointingHead serial=269420 09:03:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:03:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:03:44 Point started: ret=0 09:03:44 point_skyscan result=0 09:03:45 Check angles 09:03:45 SkyScan query 09:03:46 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.86<-21524 Statuses=0009 0009 09:03:46 Msec=0 True Az=136.305 Ze=-142.86 Az status=0009 Ze status=0009 09:03:46 Check angles 09:03:46 SkyScan query 09:03:46 SkyScan query done: ret=0 az=154.155<-10277 ze=-121.425<-20095 Statuses=0009 0009 09:03:46 Msec=750 True Az=154.155 Ze=-121.425 Az status=0009 Ze status=0009 09:03:47 Check angles 09:03:47 SkyScan query 09:03:47 SkyScan query done: ret=0 az=171.645<-11443 ze=-100.35<-18690 Statuses=0009 0009 09:03:47 Msec=1500 True Az=171.645 Ze=-100.35 Az status=0009 Ze status=0009 09:03:47 Check angles 09:03:47 SkyScan query 09:03:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.47<-17298 Statuses=0008 0009 09:03:48 Msec=2250 True Az=176.01 Ze=-79.47 Az status=0008 Ze status=0009 09:03:48 Check angles 09:03:48 SkyScan query 09:03:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.08<-15872 Statuses=0008 0009 09:03:49 Msec=3000 True Az=176.01 Ze=-58.08 Az status=0008 Ze status=0009 09:03:49 Check angles 09:03:49 SkyScan query 09:03:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:03:49 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:03:49 Message to Master queued w/err=0: serial=269420 error=0 09:03:54 Received message from Master: op=Filter serial=269421 09:03:54 Color wheel filter change from 0 to 0 09:03:54 FLIGetFilterPos err=0 currentPosition=0 09:03:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:54 Filter is already there-color wheel unchanged 09:03:55 Received message from Master: op=Shutter serial=269422 09:03:55 Shutter LASER close 09:03:55 Received message from Camera: op=State serial=269424 09:03:55 GetSingleValue result=40 Value=cccccccc 09:03:55 SkyScan query 09:03:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:03:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:55 Parameters OK 09:03:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:55 Set A/D data flow result=40 09:03:55 Set A/D channel type result=40 09:03:55 Set A/D encoding result=40 09:03:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:55 Set channel filter=0.000000e+000 result=40 09:03:55 Config A/D Result=40 09:03:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:55 Get A/D filter: -9.255963e+061 result=40 09:03:55 Get A/D value=-858993460 result=40 09:03:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:55 Parameters OK 09:03:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:55 Set A/D data flow result=40 09:03:55 Set A/D channel type result=40 09:03:55 Set A/D encoding result=40 09:03:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:55 Set channel filter=0.000000e+000 result=40 09:03:55 Config A/D Result=40 09:03:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:55 Get A/D filter: -9.255963e+061 result=40 09:03:55 Get A/D value=-858993460 result=40 09:03:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:55 Aux= 09:03:55 Message to Camera, serial 269424 queued 09:04:32 Received message from Master: op=PointingHead serial=269437 09:04:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:04:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:04:32 Point started: ret=0 09:04:32 point_skyscan result=0 09:04:33 Check angles 09:04:33 SkyScan query 09:04:34 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.39<-13426 Statuses=0009 0009 09:04:34 Msec=0 True Az=152.715 Ze=-21.39 Az status=0009 Ze status=0009 09:04:34 Check angles 09:04:34 SkyScan query 09:04:35 SkyScan query done: ret=0 az=134.775<-8985 ze=0.015<-11999 Statuses=0009 0009 09:04:35 Msec=750 True Az=134.775 Ze=0.015 Az status=0009 Ze status=0009 09:04:35 Check angles 09:04:35 SkyScan query 09:04:35 SkyScan query done: ret=0 az=117.39<-7826 ze=21.045<-10597 Statuses=0009 0009 09:04:35 Msec=1500 True Az=117.39 Ze=21.045 Az status=0009 Ze status=0009 09:04:35 Check angles 09:04:35 SkyScan query 09:04:36 SkyScan query done: ret=0 az=99.945<-6663 ze=41.94<-9204 Statuses=0009 0009 09:04:36 Msec=2250 True Az=99.945 Ze=41.94 Az status=0009 Ze status=0009 09:04:36 Check angles 09:04:36 SkyScan query 09:04:37 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:04:37 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:04:37 Check angles 09:04:37 SkyScan query 09:04:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:04:38 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 09:04:38 Message to Master queued w/err=0: serial=269437 error=0 09:04:43 Received message from Master: op=Filter serial=269438 09:04:43 Color wheel filter change from 0 to 0 09:04:43 FLIGetFilterPos err=0 currentPosition=0 09:04:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:43 Filter is already there-color wheel unchanged 09:04:43 Received message from Master: op=Shutter serial=269439 09:04:43 Shutter LASER close 09:04:43 Received message from Camera: op=State serial=269441 09:04:43 GetSingleValue result=40 Value=cccccccc 09:04:43 SkyScan query 09:04:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:04:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:43 Parameters OK 09:04:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:43 Set A/D data flow result=40 09:04:43 Set A/D channel type result=40 09:04:43 Set A/D encoding result=40 09:04:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:43 Set channel filter=0.000000e+000 result=40 09:04:43 Config A/D Result=40 09:04:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:43 Get A/D filter: -9.255963e+061 result=40 09:04:43 Get A/D value=-858993460 result=40 09:04:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:43 Parameters OK 09:04:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:43 Set A/D data flow result=40 09:04:43 Set A/D channel type result=40 09:04:43 Set A/D encoding result=40 09:04:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:43 Set channel filter=0.000000e+000 result=40 09:04:43 Config A/D Result=40 09:04:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:43 Get A/D filter: -9.255963e+061 result=40 09:04:43 Get A/D value=-858993460 result=40 09:04:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:43 Aux= 09:04:43 Message to Camera, serial 269441 queued 09:05:20 Received message from Master: op=PointingHead serial=269454 09:05:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:05:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:05:21 Point started: ret=0 09:05:21 point_skyscan result=0 09:05:21 Check angles 09:05:21 SkyScan query 09:05:22 SkyScan query done: ret=0 az=85.995<-5733 ze=21.705<-10553 Statuses=0008 0009 09:05:22 Msec=0 True Az=85.995 Ze=21.705 Az status=0008 Ze status=0009 09:05:22 Check angles 09:05:22 SkyScan query 09:05:23 SkyScan query done: ret=0 az=86.01<-5734 ze=0.36<-11976 Statuses=0008 0009 09:05:23 Msec=750 True Az=86.01 Ze=0.36 Az status=0008 Ze status=0009 09:05:23 Check angles 09:05:23 SkyScan query 09:05:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.64<-13376 Statuses=0008 0009 09:05:23 Msec=1500 True Az=85.995 Ze=-20.64 Az status=0008 Ze status=0009 09:05:24 Check angles 09:05:24 SkyScan query 09:05:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.045<-14803 Statuses=0008 0009 09:05:24 Msec=2250 True Az=85.995 Ze=-42.045 Az status=0008 Ze status=0009 09:05:24 Check angles 09:05:24 SkyScan query 09:05:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 09:05:25 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 09:05:25 Message to Master queued w/err=0: serial=269454 error=0 09:05:30 Received message from Master: op=Filter serial=269455 09:05:30 Color wheel filter change from 0 to 0 09:05:30 FLIGetFilterPos err=0 currentPosition=0 09:05:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:30 Filter is already there-color wheel unchanged 09:05:30 Received message from Master: op=Shutter serial=269456 09:05:30 Shutter LASER close 09:05:30 Received message from Camera: op=State serial=269458 09:05:30 GetSingleValue result=40 Value=cccccccc 09:05:30 SkyScan query 09:05:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:05:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:31 Parameters OK 09:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:31 Set A/D data flow result=40 09:05:31 Set A/D channel type result=40 09:05:31 Set A/D encoding result=40 09:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:31 Set channel filter=0.000000e+000 result=40 09:05:31 Config A/D Result=40 09:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:31 Get A/D filter: -9.255963e+061 result=40 09:05:31 Get A/D value=-858993460 result=40 09:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:31 Parameters OK 09:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:31 Set A/D data flow result=40 09:05:31 Set A/D channel type result=40 09:05:31 Set A/D encoding result=40 09:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:31 Set channel filter=0.000000e+000 result=40 09:05:31 Config A/D Result=40 09:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:31 Get A/D filter: -9.255963e+061 result=40 09:05:31 Get A/D value=-858993460 result=40 09:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:31 Aux= 09:05:31 Message to Camera, serial 269458 queued 09:06:08 Received message from Master: op=PointingHead serial=269471 09:06:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:06:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:06:08 Point started: ret=0 09:06:08 point_skyscan result=0 09:06:09 Check angles 09:06:09 SkyScan query 09:06:09 SkyScan query done: ret=0 az=109.5<-7300 ze=-81.795<-17453 Statuses=0009 0009 09:06:09 Msec=0 True Az=109.5 Ze=-81.795 Az status=0009 Ze status=0009 09:06:09 Check angles 09:06:09 SkyScan query [UTC 2018-12-19 09:06:10] 09:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 09:06:10 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 09:06:10 Check angles 09:06:10 SkyScan query 09:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 09:06:11 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 09:06:11 Check angles 09:06:11 SkyScan query 09:06:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 09:06:12 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 09:06:12 Check angles 09:06:12 SkyScan query 09:06:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.455<-23097 Statuses=0008 0009 09:06:12 Msec=3000 True Az=112.995 Ze=-166.455 Az status=0008 Ze status=0009 09:06:13 Check angles 09:06:13 SkyScan query 09:06:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:06:13 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:06:13 Message to Master queued w/err=0: serial=269471 error=0 09:06:18 Received message from Master: op=Filter serial=269472 09:06:18 Color wheel filter change from 0 to 0 09:06:18 FLIGetFilterPos err=0 currentPosition=0 09:06:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:18 Filter is already there-color wheel unchanged 09:06:18 Received message from Master: op=Shutter serial=269473 09:06:18 Shutter LASER open 09:06:18 Received message from Camera: op=State serial=269475 09:06:18 GetSingleValue result=40 Value=cccccccc 09:06:18 SkyScan query 09:06:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:06:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:19 Parameters OK 09:06:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:19 Set A/D data flow result=40 09:06:19 Set A/D channel type result=40 09:06:19 Set A/D encoding result=40 09:06:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:19 Set channel filter=0.000000e+000 result=40 09:06:19 Config A/D Result=40 09:06:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:19 Get A/D filter: -9.255963e+061 result=40 09:06:19 Get A/D value=-858993460 result=40 09:06:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:19 Parameters OK 09:06:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:19 Set A/D data flow result=40 09:06:19 Set A/D channel type result=40 09:06:19 Set A/D encoding result=40 09:06:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:19 Set channel filter=0.000000e+000 result=40 09:06:19 Config A/D Result=40 09:06:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:19 Get A/D filter: -9.255963e+061 result=40 09:06:19 Get A/D value=-858993460 result=40 09:06:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:19 Aux= 09:06:19 Message to Camera, serial 269475 queued 09:06:27 Received message from Master: op=Shutter serial=269485 09:06:27 Shutter LASER close 09:06:28 Received message from Master: op=PointingHead serial=269489 09:06:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:06:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:06:28 Point started: ret=0 09:06:28 point_skyscan result=0 09:06:29 Check angles 09:06:29 SkyScan query 09:06:30 SkyScan query done: ret=0 az=90.045<-6003 ze=157.365<-1509 Statuses=0009 0009 09:06:30 Msec=0 True Az=90.045 Ze=157.365 Az status=0009 Ze status=0009 09:06:30 Check angles 09:06:30 SkyScan query 09:06:30 SkyScan query done: ret=0 az=72.57<-4838 ze=136.41<-2906 Statuses=0009 0009 09:06:30 Msec=750 True Az=72.57 Ze=136.41 Az status=0009 Ze status=0009 09:06:31 Check angles 09:06:31 SkyScan query 09:06:31 SkyScan query done: ret=0 az=54.765<-3651 ze=115.005<-4333 Statuses=0009 0009 09:06:31 Msec=1500 True Az=54.765 Ze=115.005 Az status=0009 Ze status=0009 09:06:31 Check angles 09:06:31 SkyScan query 09:06:32 SkyScan query done: ret=0 az=40.995<-2733 ze=94.08<-5728 Statuses=0009 0009 09:06:32 Msec=2250 True Az=40.995 Ze=94.08 Az status=0009 Ze status=0009 09:06:32 Check angles 09:06:32 SkyScan query 09:06:33 SkyScan query done: ret=0 az=40.98<-2732 ze=72.66<-7156 Statuses=0008 0009 09:06:33 Msec=3000 True Az=40.98 Ze=72.66 Az status=0008 Ze status=0009 09:06:33 Check angles 09:06:33 SkyScan query 09:06:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 09:06:33 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 09:06:34 Check angles 09:06:34 SkyScan query 09:06:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:06:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:06:34 Message to Master queued w/err=0: serial=269489 error=0 09:06:39 Received message from Master: op=Filter serial=269490 09:06:39 Color wheel filter change from 0 to 0 09:06:39 FLIGetFilterPos err=0 currentPosition=0 09:06:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:39 Filter is already there-color wheel unchanged 09:06:39 Received message from Master: op=Shutter serial=269491 09:06:39 Shutter LASER close 09:06:39 Received message from Camera: op=State serial=269493 09:06:39 GetSingleValue result=40 Value=cccccccc 09:06:39 SkyScan query 09:06:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:06:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:40 Parameters OK 09:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:40 Set A/D data flow result=40 09:06:40 Set A/D channel type result=40 09:06:40 Set A/D encoding result=40 09:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:40 Set channel filter=0.000000e+000 result=40 09:06:40 Config A/D Result=40 09:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:40 Get A/D filter: -9.255963e+061 result=40 09:06:40 Get A/D value=-858993460 result=40 09:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:40 Parameters OK 09:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:40 Set A/D data flow result=40 09:06:40 Set A/D channel type result=40 09:06:40 Set A/D encoding result=40 09:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:40 Set channel filter=0.000000e+000 result=40 09:06:40 Config A/D Result=40 09:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:40 Get A/D filter: -9.255963e+061 result=40 09:06:40 Get A/D value=-858993460 result=40 09:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:40 Aux= 09:06:40 Message to Camera, serial 269493 queued 09:07:16 Received message from Master: op=PointingHead serial=269505 09:07:16 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:07:16 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:07:16 Point started: ret=0 09:07:16 point_skyscan result=0 09:07:17 Check angles 09:07:17 SkyScan query 09:07:18 SkyScan query done: ret=0 az=63.93<-4262 ze=66.54<-7564 Statuses=0009 0008 09:07:18 Msec=0 True Az=63.93 Ze=66.54 Az status=0009 Ze status=0008 09:07:18 Check angles 09:07:18 SkyScan query 09:07:18 SkyScan query done: ret=0 az=81.345<-5423 ze=66.525<-7565 Statuses=0009 0008 09:07:18 Msec=750 True Az=81.345 Ze=66.525 Az status=0009 Ze status=0008 09:07:19 Check angles 09:07:19 SkyScan query 09:07:19 SkyScan query done: ret=0 az=99.33<-6622 ze=66.525<-7565 Statuses=0009 0008 09:07:19 Msec=1500 True Az=99.33 Ze=66.525 Az status=0009 Ze status=0008 09:07:19 Check angles 09:07:19 SkyScan query 09:07:20 SkyScan query done: ret=0 az=116.775<-7785 ze=66.51<-7566 Statuses=0009 0008 09:07:20 Msec=2250 True Az=116.775 Ze=66.51 Az status=0009 Ze status=0008 09:07:20 Check angles 09:07:20 SkyScan query 09:07:21 SkyScan query done: ret=0 az=134.145<-8943 ze=66.51<-7566 Statuses=0009 0008 09:07:21 Msec=3000 True Az=134.145 Ze=66.51 Az status=0009 Ze status=0008 09:07:21 Check angles 09:07:21 SkyScan query 09:07:21 SkyScan query done: ret=0 az=151.56<-10104 ze=66.51<-7566 Statuses=0009 0008 09:07:21 Msec=3750 True Az=151.56 Ze=66.51 Az status=0009 Ze status=0008 09:07:22 Check angles 09:07:22 SkyScan query 09:07:22 SkyScan query done: ret=0 az=158.04<-10536 ze=66.51<-7566 Statuses=0008 0008 09:07:22 Msec=4500 True Az=158.04 Ze=66.51 Az status=0008 Ze status=0008 09:07:22 Message to Master queued w/err=0: serial=269505 error=0 09:07:27 Received message from Master: op=Filter serial=269506 09:07:27 Color wheel filter change from 0 to 0 09:07:27 FLIGetFilterPos err=0 currentPosition=0 09:07:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:27 Filter is already there-color wheel unchanged 09:07:27 Received message from Master: op=Shutter serial=269507 09:07:27 Shutter LASER close 09:07:27 Received message from Camera: op=State serial=269509 09:07:27 GetSingleValue result=40 Value=cccccccc 09:07:27 SkyScan query 09:07:28 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 09:07:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:28 Parameters OK 09:07:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:28 Set A/D data flow result=40 09:07:28 Set A/D channel type result=40 09:07:28 Set A/D encoding result=40 09:07:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:28 Set channel filter=0.000000e+000 result=40 09:07:28 Config A/D Result=40 09:07:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:28 Get A/D filter: -9.255963e+061 result=40 09:07:28 Get A/D value=-858993460 result=40 09:07:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:28 Parameters OK 09:07:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:28 Set A/D data flow result=40 09:07:28 Set A/D channel type result=40 09:07:28 Set A/D encoding result=40 09:07:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:28 Set channel filter=0.000000e+000 result=40 09:07:28 Config A/D Result=40 09:07:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:28 Get A/D filter: -9.255963e+061 result=40 09:07:28 Get A/D value=-858993460 result=40 09:07:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:28 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:28 Aux= 09:07:28 Message to Camera, serial 269509 queued 09:08:05 Received message from Master: op=PointingHead serial=269522 09:08:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:08:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:08:05 Point started: ret=0 09:08:05 point_skyscan result=0 09:08:06 Check angles 09:08:06 SkyScan query 09:08:07 SkyScan query done: ret=0 az=134.61<-8974 ze=96.72<-5552 Statuses=0009 0009 09:08:07 Msec=0 True Az=134.61 Ze=96.72 Az status=0009 Ze status=0009 09:08:07 Check angles 09:08:07 SkyScan query 09:08:07 SkyScan query done: ret=0 az=130.995<-8733 ze=117.705<-4153 Statuses=0008 0009 09:08:07 Msec=750 True Az=130.995 Ze=117.705 Az status=0008 Ze status=0009 09:08:08 Check angles 09:08:08 SkyScan query 09:08:08 SkyScan query done: ret=0 az=130.995<-8733 ze=138.6<-2760 Statuses=0008 0009 09:08:08 Msec=1500 True Az=130.995 Ze=138.6 Az status=0008 Ze status=0009 09:08:08 Check angles 09:08:08 SkyScan query 09:08:09 SkyScan query done: ret=0 az=130.995<-8733 ze=159.585<-1361 Statuses=0008 0009 09:08:09 Msec=2250 True Az=130.995 Ze=159.585 Az status=0008 Ze status=0009 09:08:09 Check angles 09:08:09 SkyScan query 09:08:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.445<-23963 Statuses=0008 0009 09:08:10 Msec=3000 True Az=130.995 Ze=-179.445 Az status=0008 Ze status=0009 09:08:10 Check angles 09:08:10 SkyScan query 09:08:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.52<-22568 Statuses=0008 0009 09:08:10 Msec=3750 True Az=130.995 Ze=-158.52 Az status=0008 Ze status=0009 09:08:11 Check angles 09:08:11 SkyScan query 09:08:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 09:08:11 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 09:08:11 Check angles 09:08:11 SkyScan query 09:08:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:08:12 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:08:12 Message to Master queued w/err=0: serial=269522 error=0 09:08:17 Received message from Master: op=Filter serial=269523 09:08:17 Color wheel filter change from 0 to 0 09:08:17 FLIGetFilterPos err=0 currentPosition=0 09:08:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:17 Filter is already there-color wheel unchanged 09:08:17 Received message from Master: op=Shutter serial=269524 09:08:17 Shutter LASER close 09:08:17 Received message from Camera: op=State serial=269526 09:08:17 GetSingleValue result=40 Value=cccccccc 09:08:17 SkyScan query 09:08:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:08:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:18 Parameters OK 09:08:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:18 Set A/D data flow result=40 09:08:18 Set A/D channel type result=40 09:08:18 Set A/D encoding result=40 09:08:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:18 Set channel filter=0.000000e+000 result=40 09:08:18 Config A/D Result=40 09:08:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:18 Get A/D filter: -9.255963e+061 result=40 09:08:18 Get A/D value=-858993460 result=40 09:08:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:18 Parameters OK 09:08:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:18 Set A/D data flow result=40 09:08:18 Set A/D channel type result=40 09:08:18 Set A/D encoding result=40 09:08:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:18 Set channel filter=0.000000e+000 result=40 09:08:18 Config A/D Result=40 09:08:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:18 Get A/D filter: -9.255963e+061 result=40 09:08:18 Get A/D value=-858993460 result=40 09:08:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:18 Aux= 09:08:18 Message to Camera, serial 269526 queued 09:08:55 Received message from Master: op=PointingHead serial=269539 09:08:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:08:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:08:55 Point started: ret=0 09:08:55 point_skyscan result=0 09:08:56 Check angles 09:08:56 SkyScan query 09:08:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 09:08:56 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 09:08:56 Check angles 09:08:56 SkyScan query 09:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:08:57 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:08:57 Message to Master queued w/err=0: serial=269539 error=0 09:09:02 Received message from Master: op=Filter serial=269540 09:09:02 Color wheel filter change from 0 to 0 09:09:02 FLIGetFilterPos err=0 currentPosition=0 09:09:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:02 Filter is already there-color wheel unchanged 09:09:02 Received message from Master: op=Shutter serial=269541 09:09:02 Shutter LASER open 09:09:02 Received message from Camera: op=State serial=269543 09:09:02 GetSingleValue result=40 Value=cccccccc 09:09:02 SkyScan query 09:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:09:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:03 Parameters OK 09:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:03 Set A/D data flow result=40 09:09:03 Set A/D channel type result=40 09:09:03 Set A/D encoding result=40 09:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:03 Set channel filter=0.000000e+000 result=40 09:09:03 Config A/D Result=40 09:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:03 Get A/D filter: -9.255963e+061 result=40 09:09:03 Get A/D value=-858993460 result=40 09:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:03 Parameters OK 09:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:03 Set A/D data flow result=40 09:09:03 Set A/D channel type result=40 09:09:03 Set A/D encoding result=40 09:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:03 Set channel filter=0.000000e+000 result=40 09:09:03 Config A/D Result=40 09:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:03 Get A/D filter: -9.255963e+061 result=40 09:09:03 Get A/D value=-858993460 result=40 09:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:03 Aux= 09:09:03 Message to Camera, serial 269543 queued 09:09:11 Received message from Master: op=Shutter serial=269553 09:09:11 Shutter LASER close 09:09:12 Received message from Master: op=PointingHead serial=269557 09:09:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:09:12 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:09:12 Point started: ret=0 09:09:12 point_skyscan result=0 09:09:13 Check angles 09:09:13 SkyScan query 09:09:14 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.49<-21566 Statuses=0009 0009 09:09:14 Msec=0 True Az=135.765 Ze=-143.49 Az status=0009 Ze status=0009 09:09:14 Check angles 09:09:14 SkyScan query 09:09:14 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.535<-20169 Statuses=0009 0009 09:09:14 Msec=750 True Az=153.435 Ze=-122.535 Az status=0009 Ze status=0009 09:09:14 Check angles 09:09:14 SkyScan query 09:09:15 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.64<-18776 Statuses=0009 0009 09:09:15 Msec=1500 True Az=170.76 Ze=-101.64 Az status=0009 Ze status=0009 09:09:15 Check angles 09:09:15 SkyScan query 09:09:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.625<-17375 Statuses=0008 0009 09:09:16 Msec=2250 True Az=176.01 Ze=-80.625 Az status=0008 Ze status=0009 09:09:16 Check angles 09:09:16 SkyScan query 09:09:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.7<-15980 Statuses=0008 0009 09:09:17 Msec=3000 True Az=176.01 Ze=-59.7 Az status=0008 Ze status=0009 09:09:17 Check angles 09:09:17 SkyScan query 09:09:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:09:17 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:09:17 Message to Master queued w/err=0: serial=269557 error=0 09:09:22 Received message from Master: op=Filter serial=269558 09:09:22 Color wheel filter change from 0 to 0 09:09:22 FLIGetFilterPos err=0 currentPosition=0 09:09:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:22 Filter is already there-color wheel unchanged 09:09:22 Received message from Master: op=Shutter serial=269559 09:09:22 Shutter LASER close 09:09:23 Received message from Camera: op=State serial=269561 09:09:23 GetSingleValue result=40 Value=cccccccc 09:09:23 SkyScan query 09:09:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:09:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:23 Parameters OK 09:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:23 Set A/D data flow result=40 09:09:23 Set A/D channel type result=40 09:09:23 Set A/D encoding result=40 09:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:23 Set channel filter=0.000000e+000 result=40 09:09:23 Config A/D Result=40 09:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:23 Get A/D filter: -9.255963e+061 result=40 09:09:23 Get A/D value=-858993460 result=40 09:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:23 Parameters OK 09:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:23 Set A/D data flow result=40 09:09:23 Set A/D channel type result=40 09:09:23 Set A/D encoding result=40 09:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:23 Set channel filter=0.000000e+000 result=40 09:09:23 Config A/D Result=40 09:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:23 Get A/D filter: -9.255963e+061 result=40 09:09:23 Get A/D value=-858993460 result=40 09:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:23 Aux= 09:09:23 Message to Camera, serial 269561 queued 09:10:00 Received message from Master: op=PointingHead serial=269574 09:10:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:10:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:10:00 Point started: ret=0 09:10:00 point_skyscan result=0 09:10:01 Check angles 09:10:01 SkyScan query 09:10:02 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.9<-13460 Statuses=0009 0009 09:10:02 Msec=0 True Az=152.97 Ze=-21.9 Az status=0009 Ze status=0009 09:10:02 Check angles 09:10:02 SkyScan query 09:10:03 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.84<-12056 Statuses=0009 0009 09:10:03 Msec=750 True Az=135.585 Ze=-0.84 Az status=0009 Ze status=0009 09:10:03 Check angles 09:10:03 SkyScan query 09:10:03 SkyScan query done: ret=0 az=118.08<-7872 ze=20.025<-10665 Statuses=0009 0009 09:10:03 Msec=1500 True Az=118.08 Ze=20.025 Az status=0009 Ze status=0009 09:10:03 Check angles 09:10:03 SkyScan query 09:10:04 SkyScan query done: ret=0 az=100.71<-6714 ze=41.07<-9262 Statuses=0009 0009 09:10:04 Msec=2250 True Az=100.71 Ze=41.07 Az status=0009 Ze status=0009 09:10:04 Check angles 09:10:04 SkyScan query 09:10:05 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 09:10:05 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 09:10:05 Check angles 09:10:05 SkyScan query 09:10:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:10:06 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 09:10:06 Message to Master queued w/err=0: serial=269574 error=0 09:10:11 Received message from Master: op=Filter serial=269575 09:10:11 Color wheel filter change from 0 to 0 09:10:11 FLIGetFilterPos err=0 currentPosition=0 09:10:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:11 Filter is already there-color wheel unchanged 09:10:11 Received message from Master: op=Shutter serial=269576 09:10:11 Shutter LASER close 09:10:11 Received message from Camera: op=State serial=269578 09:10:11 GetSingleValue result=40 Value=cccccccc 09:10:11 SkyScan query 09:10:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:10:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:11 Parameters OK 09:10:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:11 Set A/D data flow result=40 09:10:11 Set A/D channel type result=40 09:10:11 Set A/D encoding result=40 09:10:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:11 Set channel filter=0.000000e+000 result=40 09:10:11 Config A/D Result=40 09:10:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:11 Get A/D filter: -9.255963e+061 result=40 09:10:11 Get A/D value=-858993460 result=40 09:10:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:11 Parameters OK 09:10:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:11 Set A/D data flow result=40 09:10:11 Set A/D channel type result=40 09:10:11 Set A/D encoding result=40 09:10:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:11 Set channel filter=0.000000e+000 result=40 09:10:11 Config A/D Result=40 09:10:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:11 Get A/D filter: -9.255963e+061 result=40 09:10:11 Get A/D value=-858993460 result=40 09:10:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:11 Aux= 09:10:11 Message to Camera, serial 269578 queued 09:10:48 Received message from Master: op=PointingHead serial=269591 09:10:48 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:10:48 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:10:49 Point started: ret=0 09:10:49 point_skyscan result=0 09:10:49 Check angles 09:10:49 SkyScan query 09:10:50 SkyScan query done: ret=0 az=85.995<-5733 ze=21.195<-10587 Statuses=0008 0009 09:10:50 Msec=0 True Az=85.995 Ze=21.195 Az status=0008 Ze status=0009 09:10:50 Check angles 09:10:50 SkyScan query 09:10:51 SkyScan query done: ret=0 az=86.01<-5734 ze=0.225<-11985 Statuses=0008 0009 09:10:51 Msec=750 True Az=86.01 Ze=0.225 Az status=0008 Ze status=0009 09:10:51 Check angles 09:10:51 SkyScan query 09:10:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.745<-13383 Statuses=0008 0009 09:10:51 Msec=1500 True Az=85.995 Ze=-20.745 Az status=0008 Ze status=0009 09:10:52 Check angles 09:10:52 SkyScan query 09:10:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.67<-14778 Statuses=0008 0009 09:10:52 Msec=2250 True Az=85.995 Ze=-41.67 Az status=0008 Ze status=0009 09:10:52 Check angles 09:10:52 SkyScan query 09:10:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 09:10:53 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 09:10:53 Message to Master queued w/err=0: serial=269591 error=0 09:10:58 Received message from Master: op=Filter serial=269592 09:10:58 Color wheel filter change from 0 to 0 09:10:58 FLIGetFilterPos err=0 currentPosition=0 09:10:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:58 Filter is already there-color wheel unchanged 09:10:58 Received message from Master: op=Shutter serial=269593 09:10:58 Shutter LASER close 09:10:58 Received message from Camera: op=State serial=269595 09:10:58 GetSingleValue result=40 Value=cccccccc 09:10:58 SkyScan query 09:10:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:10:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:59 Parameters OK 09:10:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:59 Set A/D data flow result=40 09:10:59 Set A/D channel type result=40 09:10:59 Set A/D encoding result=40 09:10:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:59 Set channel filter=0.000000e+000 result=40 09:10:59 Config A/D Result=40 09:10:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:59 Get A/D filter: -9.255963e+061 result=40 09:10:59 Get A/D value=-858993460 result=40 09:10:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:59 Parameters OK 09:10:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:59 Set A/D data flow result=40 09:10:59 Set A/D channel type result=40 09:10:59 Set A/D encoding result=40 09:10:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:59 Set channel filter=0.000000e+000 result=40 09:10:59 Config A/D Result=40 09:10:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:59 Get A/D filter: -9.255963e+061 result=40 09:10:59 Get A/D value=-858993460 result=40 09:10:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:59 Aux= 09:10:59 Message to Camera, serial 269595 queued 09:11:36 Received message from Master: op=PointingHead serial=269608 09:11:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:11:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:11:36 Point started: ret=0 09:11:36 point_skyscan result=0 09:11:37 Check angles 09:11:37 SkyScan query 09:11:37 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.375<-17425 Statuses=0009 0009 09:11:37 Msec=0 True Az=109.365 Ze=-81.375 Az status=0009 Ze status=0009 09:11:38 Check angles 09:11:38 SkyScan query 09:11:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.3<-18820 Statuses=0008 0009 09:11:38 Msec=750 True Az=112.995 Ze=-102.3 Az status=0008 Ze status=0009 09:11:38 Check angles 09:11:38 SkyScan query 09:11:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 09:11:39 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 09:11:39 Check angles 09:11:39 SkyScan query 09:11:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.21<-21614 Statuses=0008 0009 09:11:40 Msec=2250 True Az=112.995 Ze=-144.21 Az status=0008 Ze status=0009 09:11:40 Check angles 09:11:40 SkyScan query 09:11:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.195<-23013 Statuses=0008 0009 09:11:40 Msec=3000 True Az=112.995 Ze=-165.195 Az status=0008 Ze status=0009 09:11:41 Check angles 09:11:41 SkyScan query 09:11:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:11:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:11:41 Message to Master queued w/err=0: serial=269608 error=0 09:11:46 Received message from Master: op=Filter serial=269609 09:11:46 Color wheel filter change from 0 to 0 09:11:46 FLIGetFilterPos err=0 currentPosition=0 09:11:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:46 Filter is already there-color wheel unchanged 09:11:46 Received message from Master: op=Shutter serial=269610 09:11:46 Shutter LASER open 09:11:46 Received message from Camera: op=State serial=269612 09:11:46 GetSingleValue result=40 Value=cccccccc 09:11:46 SkyScan query 09:11:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:11:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:47 Parameters OK 09:11:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:47 Set A/D data flow result=40 09:11:47 Set A/D channel type result=40 09:11:47 Set A/D encoding result=40 09:11:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:47 Set channel filter=0.000000e+000 result=40 09:11:47 Config A/D Result=40 09:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:47 Get A/D filter: -9.255963e+061 result=40 09:11:47 Get A/D value=-858993460 result=40 09:11:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:47 Parameters OK 09:11:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:47 Set A/D data flow result=40 09:11:47 Set A/D channel type result=40 09:11:47 Set A/D encoding result=40 09:11:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:47 Set channel filter=0.000000e+000 result=40 09:11:47 Config A/D Result=40 09:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:47 Get A/D filter: -9.255963e+061 result=40 09:11:47 Get A/D value=-858993460 result=40 09:11:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:47 Aux= 09:11:47 Message to Camera, serial 269612 queued 09:11:55 Received message from Master: op=Shutter serial=269622 09:11:55 Shutter LASER close 09:11:56 Received message from Master: op=PointingHead serial=269626 09:11:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:11:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:11:56 Point started: ret=0 09:11:56 point_skyscan result=0 09:11:57 Check angles 09:11:57 SkyScan query 09:11:58 SkyScan query done: ret=0 az=89.67<-5978 ze=156.87<-1542 Statuses=0009 0009 09:11:58 Msec=0 True Az=89.67 Ze=156.87 Az status=0009 Ze status=0009 09:11:58 Check angles 09:11:58 SkyScan query 09:11:58 SkyScan query done: ret=0 az=72.09<-4806 ze=135.945<-2937 Statuses=0009 0009 09:11:58 Msec=750 True Az=72.09 Ze=135.945 Az status=0009 Ze status=0009 09:11:59 Check angles 09:11:59 SkyScan query 09:11:59 SkyScan query done: ret=0 az=54.675<-3645 ze=114.93<-4338 Statuses=0009 0009 09:11:59 Msec=1500 True Az=54.675 Ze=114.93 Az status=0009 Ze status=0009 09:11:59 Check angles 09:11:59 SkyScan query 09:12:00 SkyScan query done: ret=0 az=40.965<-2731 ze=93.57<-5762 Statuses=0009 0009 09:12:00 Msec=2250 True Az=40.965 Ze=93.57 Az status=0009 Ze status=0009 09:12:00 Check angles 09:12:00 SkyScan query 09:12:01 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 09:12:01 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 09:12:01 Check angles 09:12:01 SkyScan query 09:12:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 09:12:01 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 09:12:02 Check angles 09:12:02 SkyScan query 09:12:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:12:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:12:02 Message to Master queued w/err=0: serial=269626 error=0 09:12:07 Received message from Master: op=Filter serial=269627 09:12:07 Color wheel filter change from 0 to 0 09:12:07 FLIGetFilterPos err=0 currentPosition=0 09:12:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:07 Filter is already there-color wheel unchanged 09:12:07 Received message from Master: op=Shutter serial=269628 09:12:07 Shutter LASER close 09:12:07 Received message from Camera: op=State serial=269630 09:12:07 GetSingleValue result=40 Value=cccccccc 09:12:07 SkyScan query 09:12:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:12:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:08 Parameters OK 09:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:08 Set A/D data flow result=40 09:12:08 Set A/D channel type result=40 09:12:08 Set A/D encoding result=40 09:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:08 Set channel filter=0.000000e+000 result=40 09:12:08 Config A/D Result=40 09:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:08 Get A/D filter: -9.255963e+061 result=40 09:12:08 Get A/D value=-858993460 result=40 09:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:08 Parameters OK 09:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:08 Set A/D data flow result=40 09:12:08 Set A/D channel type result=40 09:12:08 Set A/D encoding result=40 09:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:08 Set channel filter=0.000000e+000 result=40 09:12:08 Config A/D Result=40 09:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:08 Get A/D filter: -9.255963e+061 result=40 09:12:08 Get A/D value=-858993460 result=40 09:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:08 Aux= 09:12:08 Message to Camera, serial 269630 queued 09:12:45 Received message from Master: op=PointingHead serial=269643 09:12:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:12:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:12:45 Point started: ret=0 09:12:45 point_skyscan result=0 09:12:46 Check angles 09:12:46 SkyScan query 09:12:47 SkyScan query done: ret=0 az=64.185<-4279 ze=66.525<-7565 Statuses=0009 0008 09:12:47 Msec=0 True Az=64.185 Ze=66.525 Az status=0009 Ze status=0008 09:12:47 Check angles 09:12:47 SkyScan query 09:12:47 SkyScan query done: ret=0 az=81.69<-5446 ze=66.51<-7566 Statuses=0009 0008 09:12:47 Msec=750 True Az=81.69 Ze=66.51 Az status=0009 Ze status=0008 09:12:47 Check angles 09:12:47 SkyScan query 09:12:48 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 09:12:48 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 09:12:48 Check angles 09:12:48 SkyScan query 09:12:49 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 09:12:49 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 09:12:49 Check angles 09:12:49 SkyScan query 09:12:50 SkyScan query done: ret=0 az=134.415<-8961 ze=66.495<-7567 Statuses=0009 0008 09:12:50 Msec=3000 True Az=134.415 Ze=66.495 Az status=0009 Ze status=0008 09:12:50 Check angles 09:12:50 SkyScan query 09:12:50 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 09:12:50 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 09:12:51 Check angles 09:12:51 SkyScan query 09:12:51 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:12:51 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:12:51 Message to Master queued w/err=0: serial=269643 error=0 09:12:56 Received message from Master: op=Filter serial=269644 09:12:56 Color wheel filter change from 0 to 0 09:12:56 FLIGetFilterPos err=0 currentPosition=0 09:12:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:56 Filter is already there-color wheel unchanged 09:12:56 Received message from Master: op=Shutter serial=269645 09:12:56 Shutter LASER close 09:12:56 Received message from Camera: op=State serial=269647 09:12:56 GetSingleValue result=40 Value=cccccccc 09:12:56 SkyScan query 09:12:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:12:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:57 Parameters OK 09:12:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:57 Set A/D data flow result=40 09:12:57 Set A/D channel type result=40 09:12:57 Set A/D encoding result=40 09:12:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:57 Set channel filter=0.000000e+000 result=40 09:12:57 Config A/D Result=40 09:12:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:57 Get A/D filter: -9.255963e+061 result=40 09:12:57 Get A/D value=-858993460 result=40 09:12:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:57 Parameters OK 09:12:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:57 Set A/D data flow result=40 09:12:57 Set A/D channel type result=40 09:12:57 Set A/D encoding result=40 09:12:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:57 Set channel filter=0.000000e+000 result=40 09:12:57 Config A/D Result=40 09:12:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:57 Get A/D filter: -9.255963e+061 result=40 09:12:57 Get A/D value=-858993460 result=40 09:12:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:57 Aux= 09:12:57 Message to Camera, serial 269647 queued 09:13:34 Received message from Master: op=PointingHead serial=269660 09:13:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:13:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:13:34 Point started: ret=0 09:13:34 point_skyscan result=0 09:13:35 Check angles 09:13:35 SkyScan query 09:13:35 SkyScan query done: ret=0 az=135.21<-9014 ze=96.105<-5593 Statuses=0009 0009 09:13:35 Msec=0 True Az=135.21 Ze=96.105 Az status=0009 Ze status=0009 09:13:36 Check angles 09:13:36 SkyScan query 09:13:36 SkyScan query done: ret=0 az=130.995<-8733 ze=117.495<-4167 Statuses=0008 0009 09:13:36 Msec=750 True Az=130.995 Ze=117.495 Az status=0008 Ze status=0009 09:13:36 Check angles 09:13:36 SkyScan query 09:13:37 SkyScan query done: ret=0 az=130.995<-8733 ze=138.48<-2768 Statuses=0008 0009 09:13:37 Msec=1500 True Az=130.995 Ze=138.48 Az status=0008 Ze status=0009 09:13:37 Check angles 09:13:37 SkyScan query 09:13:38 SkyScan query done: ret=0 az=130.995<-8733 ze=159.375<-1375 Statuses=0008 0009 09:13:38 Msec=2250 True Az=130.995 Ze=159.375 Az status=0008 Ze status=0009 09:13:38 Check angles 09:13:38 SkyScan query 09:13:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.7<-23980 Statuses=0008 0009 09:13:39 Msec=3000 True Az=130.995 Ze=-179.7 Az status=0008 Ze status=0009 09:13:39 Check angles 09:13:39 SkyScan query 09:13:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.73<-22582 Statuses=0008 0009 09:13:39 Msec=3750 True Az=130.995 Ze=-158.73 Az status=0008 Ze status=0009 09:13:39 Check angles 09:13:39 SkyScan query 09:13:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 09:13:40 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 09:13:40 Check angles 09:13:40 SkyScan query 09:13:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:13:41 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:13:41 Message to Master queued w/err=0: serial=269660 error=0 09:13:46 Received message from Master: op=Filter serial=269661 09:13:46 Color wheel filter change from 0 to 0 09:13:46 FLIGetFilterPos err=0 currentPosition=0 09:13:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:46 Filter is already there-color wheel unchanged 09:13:46 Received message from Master: op=Shutter serial=269662 09:13:46 Shutter LASER close 09:13:46 Received message from Camera: op=State serial=269664 09:13:46 GetSingleValue result=40 Value=cccccccc 09:13:46 SkyScan query 09:13:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:13:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:47 Parameters OK 09:13:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:47 Set A/D data flow result=40 09:13:47 Set A/D channel type result=40 09:13:47 Set A/D encoding result=40 09:13:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:47 Set channel filter=0.000000e+000 result=40 09:13:47 Config A/D Result=40 09:13:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:47 Get A/D filter: -9.255963e+061 result=40 09:13:47 Get A/D value=-858993460 result=40 09:13:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:47 Parameters OK 09:13:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:47 Set A/D data flow result=40 09:13:47 Set A/D channel type result=40 09:13:47 Set A/D encoding result=40 09:13:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:47 Set channel filter=0.000000e+000 result=40 09:13:47 Config A/D Result=40 09:13:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:47 Get A/D filter: -9.255963e+061 result=40 09:13:47 Get A/D value=-858993460 result=40 09:13:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:47 Aux= 09:13:47 Message to Camera, serial 269664 queued 09:14:23 Received message from Master: op=PointingHead serial=269677 09:14:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:14:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:14:24 Point started: ret=0 09:14:24 point_skyscan result=0 09:14:24 Check angles 09:14:24 SkyScan query 09:14:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 09:14:25 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 09:14:25 Check angles 09:14:25 SkyScan query 09:14:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:14:26 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:14:26 Message to Master queued w/err=0: serial=269677 error=0 09:14:31 Received message from Master: op=Filter serial=269678 09:14:31 Color wheel filter change from 0 to 0 09:14:31 FLIGetFilterPos err=0 currentPosition=0 09:14:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:31 Filter is already there-color wheel unchanged 09:14:31 Received message from Master: op=Shutter serial=269679 09:14:31 Shutter LASER open 09:14:31 Received message from Camera: op=State serial=269681 09:14:31 GetSingleValue result=40 Value=cccccccc 09:14:31 SkyScan query 09:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:14:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:32 Parameters OK 09:14:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:32 Set A/D data flow result=40 09:14:32 Set A/D channel type result=40 09:14:32 Set A/D encoding result=40 09:14:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:32 Set channel filter=0.000000e+000 result=40 09:14:32 Config A/D Result=40 09:14:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:32 Get A/D filter: -9.255963e+061 result=40 09:14:32 Get A/D value=-858993460 result=40 09:14:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:32 Parameters OK 09:14:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:32 Set A/D data flow result=40 09:14:32 Set A/D channel type result=40 09:14:32 Set A/D encoding result=40 09:14:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:32 Set channel filter=0.000000e+000 result=40 09:14:32 Config A/D Result=40 09:14:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:32 Get A/D filter: -9.255963e+061 result=40 09:14:32 Get A/D value=-858993460 result=40 09:14:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:32 Aux= 09:14:32 Message to Camera, serial 269681 queued 09:14:40 Received message from Master: op=Shutter serial=269691 09:14:40 Shutter LASER close 09:14:41 Received message from Master: op=PointingHead serial=269695 09:14:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:14:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:14:41 Point started: ret=0 09:14:41 point_skyscan result=0 09:14:42 Check angles 09:14:42 SkyScan query 09:14:42 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.19<-21546 Statuses=0009 0009 09:14:42 Msec=0 True Az=136.11 Ze=-143.19 Az status=0009 Ze status=0009 09:14:43 Check angles 09:14:43 SkyScan query 09:14:43 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.205<-20147 Statuses=0009 0009 09:14:43 Msec=750 True Az=153.51 Ze=-122.205 Az status=0009 Ze status=0009 09:14:43 Check angles 09:14:43 SkyScan query 09:14:44 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.68<-18712 Statuses=0009 0009 09:14:44 Msec=1500 True Az=171.465 Ze=-100.68 Az status=0009 Ze status=0009 09:14:44 Check angles 09:14:44 SkyScan query 09:14:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.875<-17325 Statuses=0008 0009 09:14:45 Msec=2250 True Az=176.01 Ze=-79.875 Az status=0008 Ze status=0009 09:14:45 Check angles 09:14:45 SkyScan query 09:14:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.89<-15926 Statuses=0008 0009 09:14:46 Msec=3000 True Az=176.01 Ze=-58.89 Az status=0008 Ze status=0009 09:14:46 Check angles 09:14:46 SkyScan query 09:14:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 09:14:46 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 09:14:46 Message to Master queued w/err=0: serial=269695 error=0 09:14:51 Received message from Master: op=Filter serial=269696 09:14:51 Color wheel filter change from 0 to 0 09:14:51 FLIGetFilterPos err=0 currentPosition=0 09:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:51 Filter is already there-color wheel unchanged 09:14:51 Received message from Master: op=Shutter serial=269697 09:14:51 Shutter LASER close 09:14:52 Received message from Camera: op=State serial=269699 09:14:52 GetSingleValue result=40 Value=cccccccc 09:14:52 SkyScan query 09:14:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:14:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:52 Parameters OK 09:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:52 Set A/D data flow result=40 09:14:52 Set A/D channel type result=40 09:14:52 Set A/D encoding result=40 09:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:52 Set channel filter=0.000000e+000 result=40 09:14:52 Config A/D Result=40 09:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:52 Get A/D filter: -9.255963e+061 result=40 09:14:52 Get A/D value=-858993460 result=40 09:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:52 Parameters OK 09:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:52 Set A/D data flow result=40 09:14:52 Set A/D channel type result=40 09:14:52 Set A/D encoding result=40 09:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:52 Set channel filter=0.000000e+000 result=40 09:14:52 Config A/D Result=40 09:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:52 Get A/D filter: -9.255963e+061 result=40 09:14:52 Get A/D value=-858993460 result=40 09:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:52 Aux= 09:14:52 Message to Camera, serial 269699 queued 09:15:27 Received message from Master: op=Identify serial=269707 09:15:29 Received message from Master: op=PointingHead serial=269715 09:15:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:15:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:15:29 Point started: ret=0 09:15:29 point_skyscan result=0 09:15:30 Check angles 09:15:30 SkyScan query 09:15:31 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.525<-13435 Statuses=0009 0009 09:15:31 Msec=0 True Az=152.76 Ze=-21.525 Az status=0009 Ze status=0009 09:15:31 Check angles 09:15:31 SkyScan query [UTC 2018-12-19 09:15:32] 09:15:32 SkyScan query done: ret=0 az=134.925<-8995 ze=-0.12<-12008 Statuses=0009 0009 09:15:32 Msec=750 True Az=134.925 Ze=-0.12 Az status=0009 Ze status=0009 09:15:32 Check angles 09:15:32 SkyScan query 09:15:32 SkyScan query done: ret=0 az=117.36<-7824 ze=20.895<-10607 Statuses=0009 0009 09:15:32 Msec=1500 True Az=117.36 Ze=20.895 Az status=0009 Ze status=0009 09:15:32 Check angles 09:15:32 SkyScan query 09:15:33 SkyScan query done: ret=0 az=100.08<-6672 ze=41.805<-9213 Statuses=0009 0009 09:15:33 Msec=2250 True Az=100.08 Ze=41.805 Az status=0009 Ze status=0009 09:15:33 Check angles 09:15:33 SkyScan query 09:15:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:15:34 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:15:34 Check angles 09:15:34 SkyScan query 09:15:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:15:35 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 09:15:35 Message to Master queued w/err=0: serial=269715 error=0 09:15:40 Received message from Master: op=Filter serial=269716 09:15:40 Color wheel filter change from 0 to 0 09:15:40 FLIGetFilterPos err=0 currentPosition=0 09:15:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:40 Filter is already there-color wheel unchanged 09:15:40 Received message from Master: op=Shutter serial=269717 09:15:40 Shutter LASER close 09:15:40 Received message from Camera: op=State serial=269719 09:15:40 GetSingleValue result=40 Value=cccccccc 09:15:40 SkyScan query 09:15:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:15:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:40 Parameters OK 09:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:40 Set A/D data flow result=40 09:15:40 Set A/D channel type result=40 09:15:40 Set A/D encoding result=40 09:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:40 Set channel filter=0.000000e+000 result=40 09:15:40 Config A/D Result=40 09:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:40 Get A/D filter: -9.255963e+061 result=40 09:15:40 Get A/D value=-858993460 result=40 09:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:40 Parameters OK 09:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:40 Set A/D data flow result=40 09:15:40 Set A/D channel type result=40 09:15:40 Set A/D encoding result=40 09:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:40 Set channel filter=0.000000e+000 result=40 09:15:40 Config A/D Result=40 09:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:40 Get A/D filter: -9.255963e+061 result=40 09:15:40 Get A/D value=-858993460 result=40 09:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:40 Aux= 09:15:40 Message to Camera, serial 269719 queued [UTC 2018-12-19 09:15:52] 09:16:17 Received message from Master: op=PointingHead serial=269732 09:16:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:16:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:16:18 Point started: ret=0 09:16:18 point_skyscan result=0 09:16:18 Check angles 09:16:18 SkyScan query 09:16:19 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 09:16:19 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 09:16:19 Check angles 09:16:19 SkyScan query 09:16:20 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 09:16:20 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 09:16:20 Check angles 09:16:20 SkyScan query 09:16:20 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 09:16:20 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 09:16:21 Check angles 09:16:21 SkyScan query 09:16:21 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 09:16:21 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 09:16:21 Check angles 09:16:21 SkyScan query 09:16:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:16:22 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:16:22 Check angles 09:16:22 SkyScan query 09:16:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:16:23 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 09:16:23 Message to Master queued w/err=0: serial=269732 error=0 09:16:28 Received message from Master: op=Filter serial=269733 09:16:28 Color wheel filter change from 0 to 0 09:16:28 FLIGetFilterPos err=0 currentPosition=0 09:16:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:28 Filter is already there-color wheel unchanged 09:16:28 Received message from Master: op=Shutter serial=269734 09:16:28 Shutter LASER close 09:16:28 Received message from Camera: op=State serial=269736 09:16:28 GetSingleValue result=40 Value=cccccccc 09:16:28 SkyScan query 09:16:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:16:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:28 Parameters OK 09:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:28 Set A/D data flow result=40 09:16:28 Set A/D channel type result=40 09:16:28 Set A/D encoding result=40 09:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:28 Set channel filter=0.000000e+000 result=40 09:16:28 Config A/D Result=40 09:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:28 Get A/D filter: -9.255963e+061 result=40 09:16:28 Get A/D value=-858993460 result=40 09:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:28 Parameters OK 09:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:28 Set A/D data flow result=40 09:16:28 Set A/D channel type result=40 09:16:28 Set A/D encoding result=40 09:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:28 Set channel filter=0.000000e+000 result=40 09:16:28 Config A/D Result=40 09:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:28 Get A/D filter: -9.255963e+061 result=40 09:16:28 Get A/D value=-858993460 result=40 09:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:28 Aux= 09:16:28 Message to Camera, serial 269736 queued 09:17:05 Received message from Master: op=PointingHead serial=269749 09:17:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:17:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:17:06 Point started: ret=0 09:17:06 point_skyscan result=0 09:17:06 Check angles 09:17:06 SkyScan query 09:17:07 SkyScan query done: ret=0 az=153.195<-10213 ze=9<-11400 Statuses=0009 0009 09:17:07 Msec=0 True Az=153.195 Ze=9 Az status=0009 Ze status=0009 09:17:07 Check angles 09:17:07 SkyScan query 09:17:08 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.39<-12826 Statuses=0009 0009 09:17:08 Msec=750 True Az=135.345 Ze=-12.39 Az status=0009 Ze status=0009 09:17:08 Check angles 09:17:08 SkyScan query 09:17:08 SkyScan query done: ret=0 az=117.9<-7860 ze=-33.405<-14227 Statuses=0009 0009 09:17:08 Msec=1500 True Az=117.9 Ze=-33.405 Az status=0009 Ze status=0009 09:17:09 Check angles 09:17:09 SkyScan query 09:17:09 SkyScan query done: ret=0 az=100.47<-6698 ze=-51.555<-15437 Statuses=0009 0009 09:17:09 Msec=2250 True Az=100.47 Ze=-51.555 Az status=0009 Ze status=0009 09:17:09 Check angles 09:17:09 SkyScan query 09:17:10 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:17:10 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:17:10 Check angles 09:17:10 SkyScan query 09:17:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:17:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:17:11 Message to Master queued w/err=0: serial=269749 error=0 09:17:16 Received message from Master: op=Filter serial=269750 09:17:16 Color wheel filter change from 0 to 0 09:17:16 FLIGetFilterPos err=0 currentPosition=0 09:17:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:16 Filter is already there-color wheel unchanged 09:17:16 Received message from Master: op=Shutter serial=269751 09:17:16 Shutter LASER close 09:17:16 Received message from Camera: op=State serial=269753 09:17:16 GetSingleValue result=40 Value=cccccccc 09:17:16 SkyScan query 09:17:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:17:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:16 Parameters OK 09:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:16 Set A/D data flow result=40 09:17:16 Set A/D channel type result=40 09:17:16 Set A/D encoding result=40 09:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:16 Set channel filter=0.000000e+000 result=40 09:17:16 Config A/D Result=40 09:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:16 Get A/D filter: -9.255963e+061 result=40 09:17:16 Get A/D value=-858993460 result=40 09:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:16 Parameters OK 09:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:16 Set A/D data flow result=40 09:17:16 Set A/D channel type result=40 09:17:16 Set A/D encoding result=40 09:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:16 Set channel filter=0.000000e+000 result=40 09:17:16 Config A/D Result=40 09:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:16 Get A/D filter: -9.255963e+061 result=40 09:17:16 Get A/D value=-858993460 result=40 09:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:16 Aux= 09:17:16 Message to Camera, serial 269753 queued 09:17:53 Received message from Master: op=PointingHead serial=269766 09:17:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:17:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:17:54 Point started: ret=0 09:17:54 point_skyscan result=0 09:17:54 Check angles 09:17:54 SkyScan query 09:17:55 SkyScan query done: ret=0 az=108.765<-7251 ze=-80.955<-17397 Statuses=0009 0009 09:17:55 Msec=0 True Az=108.765 Ze=-80.955 Az status=0009 Ze status=0009 09:17:55 Check angles 09:17:55 SkyScan query 09:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 09:17:56 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 09:17:56 Check angles 09:17:56 SkyScan query 09:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 09:17:56 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 09:17:57 Check angles 09:17:57 SkyScan query 09:17:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.895<-21593 Statuses=0008 0009 09:17:57 Msec=2250 True Az=112.995 Ze=-143.895 Az status=0008 Ze status=0009 09:17:57 Check angles 09:17:57 SkyScan query 09:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.82<-22988 Statuses=0008 0009 09:17:58 Msec=3000 True Az=112.995 Ze=-164.82 Az status=0008 Ze status=0009 09:17:58 Check angles 09:17:58 SkyScan query 09:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:17:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:17:59 Message to Master queued w/err=0: serial=269766 error=0 09:18:04 Received message from Master: op=Filter serial=269767 09:18:04 Color wheel filter change from 0 to 0 09:18:04 FLIGetFilterPos err=0 currentPosition=0 09:18:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:04 Filter is already there-color wheel unchanged 09:18:04 Received message from Master: op=Shutter serial=269768 09:18:04 Shutter LASER open 09:18:04 Received message from Camera: op=State serial=269770 09:18:04 GetSingleValue result=40 Value=cccccccc 09:18:04 SkyScan query 09:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:18:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:05 Parameters OK 09:18:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:05 Set A/D data flow result=40 09:18:05 Set A/D channel type result=40 09:18:05 Set A/D encoding result=40 09:18:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:05 Set channel filter=0.000000e+000 result=40 09:18:05 Config A/D Result=40 09:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:05 Get A/D filter: -9.255963e+061 result=40 09:18:05 Get A/D value=-858993460 result=40 09:18:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:05 Parameters OK 09:18:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:05 Set A/D data flow result=40 09:18:05 Set A/D channel type result=40 09:18:05 Set A/D encoding result=40 09:18:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:05 Set channel filter=0.000000e+000 result=40 09:18:05 Config A/D Result=40 09:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:05 Get A/D filter: -9.255963e+061 result=40 09:18:05 Get A/D value=-858993460 result=40 09:18:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:05 Aux= 09:18:05 Message to Camera, serial 269770 queued 09:18:13 Received message from Master: op=Shutter serial=269780 09:18:13 Shutter LASER close 09:18:14 Received message from Master: op=PointingHead serial=269784 09:18:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:18:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:18:14 Point started: ret=0 09:18:14 point_skyscan result=0 09:18:15 Check angles 09:18:15 SkyScan query 09:18:15 SkyScan query done: ret=0 az=90.03<-6002 ze=157.32<-1512 Statuses=0009 0009 09:18:15 Msec=0 True Az=90.03 Ze=157.32 Az status=0009 Ze status=0009 09:18:15 Check angles 09:18:15 SkyScan query 09:18:16 SkyScan query done: ret=0 az=72.105<-4807 ze=135.99<-2934 Statuses=0009 0009 09:18:16 Msec=750 True Az=72.105 Ze=135.99 Az status=0009 Ze status=0009 09:18:16 Check angles 09:18:16 SkyScan query 09:18:17 SkyScan query done: ret=0 az=54.375<-3625 ze=114.51<-4366 Statuses=0009 0009 09:18:17 Msec=1500 True Az=54.375 Ze=114.51 Az status=0009 Ze status=0009 09:18:17 Check angles 09:18:17 SkyScan query 09:18:17 SkyScan query done: ret=0 az=40.98<-2732 ze=93.585<-5761 Statuses=0009 0009 09:18:17 Msec=2250 True Az=40.98 Ze=93.585 Az status=0009 Ze status=0009 09:18:18 Check angles 09:18:18 SkyScan query 09:18:18 SkyScan query done: ret=0 az=40.995<-2733 ze=72.63<-7158 Statuses=0008 0009 09:18:18 Msec=3000 True Az=40.995 Ze=72.63 Az status=0008 Ze status=0009 09:18:18 Check angles 09:18:18 SkyScan query 09:18:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 09:18:19 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 09:18:19 Check angles 09:18:19 SkyScan query 09:18:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:18:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:18:20 Message to Master queued w/err=0: serial=269784 error=0 09:18:25 Received message from Master: op=Filter serial=269785 09:18:25 Color wheel filter change from 0 to 0 09:18:25 FLIGetFilterPos err=0 currentPosition=0 09:18:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:25 Filter is already there-color wheel unchanged 09:18:25 Received message from Master: op=Shutter serial=269786 09:18:25 Shutter LASER close 09:18:25 Received message from Camera: op=State serial=269788 09:18:25 GetSingleValue result=40 Value=cccccccc 09:18:25 SkyScan query 09:18:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:18:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:26 Parameters OK 09:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:26 Set A/D data flow result=40 09:18:26 Set A/D channel type result=40 09:18:26 Set A/D encoding result=40 09:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:26 Set channel filter=0.000000e+000 result=40 09:18:26 Config A/D Result=40 09:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:26 Get A/D filter: -9.255963e+061 result=40 09:18:26 Get A/D value=-858993460 result=40 09:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:26 Parameters OK 09:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:26 Set A/D data flow result=40 09:18:26 Set A/D channel type result=40 09:18:26 Set A/D encoding result=40 09:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:26 Set channel filter=0.000000e+000 result=40 09:18:26 Config A/D Result=40 09:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:26 Get A/D filter: -9.255963e+061 result=40 09:18:26 Get A/D value=-858993460 result=40 09:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:26 Aux= 09:18:26 Message to Camera, serial 269788 queued 09:19:02 Received message from Master: op=PointingHead serial=269801 09:19:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:19:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:19:03 Point started: ret=0 09:19:03 point_skyscan result=0 09:19:04 Check angles 09:19:04 SkyScan query 09:19:04 SkyScan query done: ret=0 az=63.735<-4249 ze=66.54<-7564 Statuses=0009 0008 09:19:04 Msec=0 True Az=63.735 Ze=66.54 Az status=0009 Ze status=0008 09:19:04 Check angles 09:19:04 SkyScan query 09:19:05 SkyScan query done: ret=0 az=81.195<-5413 ze=66.525<-7565 Statuses=0009 0008 09:19:05 Msec=750 True Az=81.195 Ze=66.525 Az status=0009 Ze status=0008 09:19:05 Check angles 09:19:05 SkyScan query 09:19:06 SkyScan query done: ret=0 az=98.565<-6571 ze=66.525<-7565 Statuses=0009 0008 09:19:06 Msec=1500 True Az=98.565 Ze=66.525 Az status=0009 Ze status=0008 09:19:06 Check angles 09:19:06 SkyScan query 09:19:06 SkyScan query done: ret=0 az=115.995<-7733 ze=66.51<-7566 Statuses=0009 0008 09:19:06 Msec=2250 True Az=115.995 Ze=66.51 Az status=0009 Ze status=0008 09:19:07 Check angles 09:19:07 SkyScan query 09:19:07 SkyScan query done: ret=0 az=133.41<-8894 ze=66.51<-7566 Statuses=0009 0008 09:19:07 Msec=3000 True Az=133.41 Ze=66.51 Az status=0009 Ze status=0008 09:19:07 Check angles 09:19:07 SkyScan query 09:19:08 SkyScan query done: ret=0 az=151.035<-10069 ze=66.51<-7566 Statuses=0009 0008 09:19:08 Msec=3750 True Az=151.035 Ze=66.51 Az status=0009 Ze status=0008 09:19:08 Check angles 09:19:08 SkyScan query 09:19:09 SkyScan query done: ret=0 az=158.025<-10535 ze=66.51<-7566 Statuses=0008 0008 09:19:09 Msec=4500 True Az=158.025 Ze=66.51 Az status=0008 Ze status=0008 09:19:09 Message to Master queued w/err=0: serial=269801 error=0 09:19:14 Received message from Master: op=Filter serial=269802 09:19:14 Color wheel filter change from 0 to 0 09:19:14 FLIGetFilterPos err=0 currentPosition=0 09:19:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:14 Filter is already there-color wheel unchanged 09:19:14 Received message from Master: op=Shutter serial=269803 09:19:14 Shutter LASER close 09:19:14 Received message from Camera: op=State serial=269805 09:19:14 GetSingleValue result=40 Value=cccccccc 09:19:14 SkyScan query 09:19:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 09:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:14 Parameters OK 09:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:14 Set A/D data flow result=40 09:19:14 Set A/D channel type result=40 09:19:14 Set A/D encoding result=40 09:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:14 Set channel filter=0.000000e+000 result=40 09:19:14 Config A/D Result=40 09:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:14 Get A/D filter: -9.255963e+061 result=40 09:19:14 Get A/D value=-858993460 result=40 09:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:14 Parameters OK 09:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:14 Set A/D data flow result=40 09:19:14 Set A/D channel type result=40 09:19:14 Set A/D encoding result=40 09:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:14 Set channel filter=0.000000e+000 result=40 09:19:14 Config A/D Result=40 09:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:14 Get A/D filter: -9.255963e+061 result=40 09:19:14 Get A/D value=-858993460 result=40 09:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:14 Aux= 09:19:14 Message to Camera, serial 269805 queued 09:19:51 Received message from Master: op=PointingHead serial=269818 09:19:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:19:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:19:52 Point started: ret=0 09:19:52 point_skyscan result=0 09:19:53 Check angles 09:19:53 SkyScan query 09:19:53 SkyScan query done: ret=0 az=135.06<-9004 ze=96.285<-5581 Statuses=0009 0009 09:19:53 Msec=0 True Az=135.06 Ze=96.285 Az status=0009 Ze status=0009 09:19:53 Check angles 09:19:53 SkyScan query 09:19:54 SkyScan query done: ret=0 az=130.98<-8732 ze=117.255<-4183 Statuses=0008 0009 09:19:54 Msec=750 True Az=130.98 Ze=117.255 Az status=0008 Ze status=0009 09:19:54 Check angles 09:19:54 SkyScan query 09:19:55 SkyScan query done: ret=0 az=130.995<-8733 ze=138.165<-2789 Statuses=0008 0009 09:19:55 Msec=1500 True Az=130.995 Ze=138.165 Az status=0008 Ze status=0009 09:19:55 Check angles 09:19:55 SkyScan query 09:19:55 SkyScan query done: ret=0 az=130.995<-8733 ze=159.135<-1391 Statuses=0008 0009 09:19:55 Msec=2250 True Az=130.995 Ze=159.135 Az status=0008 Ze status=0009 09:19:56 Check angles 09:19:56 SkyScan query 09:19:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.955<-23997 Statuses=0008 0009 09:19:56 Msec=3000 True Az=130.995 Ze=-179.955 Az status=0008 Ze status=0009 09:19:56 Check angles 09:19:56 SkyScan query 09:19:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.955<-22597 Statuses=0008 0009 09:19:57 Msec=3750 True Az=130.995 Ze=-158.955 Az status=0008 Ze status=0009 09:19:57 Check angles 09:19:57 SkyScan query 09:19:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 09:19:58 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 09:19:58 Check angles 09:19:58 SkyScan query 09:19:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:19:58 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:19:58 Message to Master queued w/err=0: serial=269818 error=0 09:20:03 Received message from Master: op=Filter serial=269819 09:20:03 Color wheel filter change from 0 to 0 09:20:03 FLIGetFilterPos err=0 currentPosition=0 09:20:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:03 Filter is already there-color wheel unchanged 09:20:04 Received message from Master: op=Shutter serial=269820 09:20:04 Shutter LASER close 09:20:04 Received message from Camera: op=State serial=269822 09:20:04 GetSingleValue result=40 Value=cccccccc 09:20:04 SkyScan query 09:20:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:20:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:04 Parameters OK 09:20:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:04 Set A/D data flow result=40 09:20:04 Set A/D channel type result=40 09:20:04 Set A/D encoding result=40 09:20:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:04 Set channel filter=0.000000e+000 result=40 09:20:04 Config A/D Result=40 09:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:04 Get A/D filter: -9.255963e+061 result=40 09:20:04 Get A/D value=-858993460 result=40 09:20:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:04 Parameters OK 09:20:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:04 Set A/D data flow result=40 09:20:04 Set A/D channel type result=40 09:20:04 Set A/D encoding result=40 09:20:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:04 Set channel filter=0.000000e+000 result=40 09:20:04 Config A/D Result=40 09:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:04 Get A/D filter: -9.255963e+061 result=40 09:20:04 Get A/D value=-858993460 result=40 09:20:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:04 Aux= 09:20:04 Message to Camera, serial 269822 queued 09:20:40 Received message from Master: op=PointingHead serial=269834 09:20:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:20:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:20:40 Point started: ret=0 09:20:40 point_skyscan result=0 09:20:41 Check angles 09:20:41 SkyScan query 09:20:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.45<-23430 Statuses=0009 0009 09:20:42 Msec=0 True Az=113.01 Ze=-171.45 Az status=0009 Ze status=0009 09:20:42 Check angles 09:20:42 SkyScan query 09:20:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:20:43 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:20:43 Message to Master queued w/err=0: serial=269834 error=0 09:20:48 Received message from Master: op=Filter serial=269835 09:20:48 Color wheel filter change from 0 to 0 09:20:48 FLIGetFilterPos err=0 currentPosition=0 09:20:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:48 Filter is already there-color wheel unchanged 09:20:48 Received message from Master: op=Shutter serial=269836 09:20:48 Shutter LASER open 09:20:48 Received message from Camera: op=State serial=269838 09:20:48 GetSingleValue result=40 Value=cccccccc 09:20:48 SkyScan query 09:20:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:20:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:48 Parameters OK 09:20:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:48 Set A/D data flow result=40 09:20:48 Set A/D channel type result=40 09:20:48 Set A/D encoding result=40 09:20:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:48 Set channel filter=0.000000e+000 result=40 09:20:48 Config A/D Result=40 09:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:48 Get A/D filter: -9.255963e+061 result=40 09:20:48 Get A/D value=-858993460 result=40 09:20:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:48 Parameters OK 09:20:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:48 Set A/D data flow result=40 09:20:48 Set A/D channel type result=40 09:20:48 Set A/D encoding result=40 09:20:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:48 Set channel filter=0.000000e+000 result=40 09:20:48 Config A/D Result=40 09:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:48 Get A/D filter: -9.255963e+061 result=40 09:20:48 Get A/D value=-858993460 result=40 09:20:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:48 Aux= 09:20:48 Message to Camera, serial 269838 queued 09:20:57 Received message from Master: op=Shutter serial=269848 09:20:57 Shutter LASER close 09:20:57 Received message from Master: op=PointingHead serial=269852 09:20:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:20:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:20:58 Point started: ret=0 09:20:58 point_skyscan result=0 09:20:59 Check angles 09:20:59 SkyScan query 09:20:59 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.115<-21541 Statuses=0009 0009 09:20:59 Msec=0 True Az=136.095 Ze=-143.115 Az status=0009 Ze status=0009 09:20:59 Check angles 09:20:59 SkyScan query 09:21:00 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.1<-20140 Statuses=0009 0009 09:21:00 Msec=750 True Az=153.54 Ze=-122.1 Az status=0009 Ze status=0009 09:21:00 Check angles 09:21:00 SkyScan query 09:21:01 SkyScan query done: ret=0 az=171.12<-11408 ze=-101.205<-18747 Statuses=0009 0009 09:21:01 Msec=1500 True Az=171.12 Ze=-101.205 Az status=0009 Ze status=0009 09:21:01 Check angles 09:21:01 SkyScan query 09:21:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 09:21:01 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 09:21:02 Check angles 09:21:02 SkyScan query 09:21:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.28<-15952 Statuses=0008 0009 09:21:02 Msec=3000 True Az=175.995 Ze=-59.28 Az status=0008 Ze status=0009 09:21:02 Check angles 09:21:02 SkyScan query 09:21:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:21:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:21:03 Message to Master queued w/err=0: serial=269852 error=0 09:21:08 Received message from Master: op=Filter serial=269853 09:21:08 Color wheel filter change from 0 to 0 09:21:08 FLIGetFilterPos err=0 currentPosition=0 09:21:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:08 Filter is already there-color wheel unchanged 09:21:08 Received message from Master: op=Shutter serial=269854 09:21:08 Shutter LASER close 09:21:08 Received message from Camera: op=State serial=269856 09:21:08 GetSingleValue result=40 Value=cccccccc 09:21:08 SkyScan query 09:21:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:21:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:09 Parameters OK 09:21:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:09 Set A/D data flow result=40 09:21:09 Set A/D channel type result=40 09:21:09 Set A/D encoding result=40 09:21:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:09 Set channel filter=0.000000e+000 result=40 09:21:09 Config A/D Result=40 09:21:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:09 Get A/D filter: -9.255963e+061 result=40 09:21:09 Get A/D value=-858993460 result=40 09:21:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:09 Parameters OK 09:21:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:09 Set A/D data flow result=40 09:21:09 Set A/D channel type result=40 09:21:09 Set A/D encoding result=40 09:21:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:09 Set channel filter=0.000000e+000 result=40 09:21:09 Config A/D Result=40 09:21:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:09 Get A/D filter: -9.255963e+061 result=40 09:21:09 Get A/D value=-858993460 result=40 09:21:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:09 Aux= 09:21:09 Message to Camera, serial 269856 queued 09:21:46 Received message from Master: op=PointingHead serial=269869 09:21:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:21:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:21:46 Point started: ret=0 09:21:46 point_skyscan result=0 09:21:47 Check angles 09:21:47 SkyScan query 09:21:47 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.66<-13444 Statuses=0009 0009 09:21:47 Msec=0 True Az=152.775 Ze=-21.66 Az status=0009 Ze status=0009 09:21:48 Check angles 09:21:48 SkyScan query 09:21:48 SkyScan query done: ret=0 az=134.91<-8994 ze=-0.195<-12013 Statuses=0009 0009 09:21:48 Msec=750 True Az=134.91 Ze=-0.195 Az status=0009 Ze status=0009 09:21:48 Check angles 09:21:48 SkyScan query 09:21:49 SkyScan query done: ret=0 az=116.94<-7796 ze=21.225<-10585 Statuses=0009 0009 09:21:49 Msec=1500 True Az=116.94 Ze=21.225 Az status=0009 Ze status=0009 09:21:49 Check angles 09:21:49 SkyScan query 09:21:50 SkyScan query done: ret=0 az=99.54<-6636 ze=42.105<-9193 Statuses=0009 0009 09:21:50 Msec=2250 True Az=99.54 Ze=42.105 Az status=0009 Ze status=0009 09:21:50 Check angles 09:21:50 SkyScan query 09:21:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 09:21:50 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 09:21:51 Check angles 09:21:51 SkyScan query 09:21:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:21:51 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 09:21:51 Message to Master queued w/err=0: serial=269869 error=0 09:21:56 Received message from Master: op=Filter serial=269870 09:21:56 Color wheel filter change from 0 to 0 09:21:56 FLIGetFilterPos err=0 currentPosition=0 09:21:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:56 Filter is already there-color wheel unchanged 09:21:56 Received message from Master: op=Shutter serial=269871 09:21:56 Shutter LASER close 09:21:56 Received message from Camera: op=State serial=269873 09:21:56 GetSingleValue result=40 Value=cccccccc 09:21:56 SkyScan query 09:21:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:21:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:57 Parameters OK 09:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:57 Set A/D data flow result=40 09:21:57 Set A/D channel type result=40 09:21:57 Set A/D encoding result=40 09:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:57 Set channel filter=0.000000e+000 result=40 09:21:57 Config A/D Result=40 09:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:57 Get A/D filter: -9.255963e+061 result=40 09:21:57 Get A/D value=-858993460 result=40 09:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:57 Parameters OK 09:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:57 Set A/D data flow result=40 09:21:57 Set A/D channel type result=40 09:21:57 Set A/D encoding result=40 09:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:57 Set channel filter=0.000000e+000 result=40 09:21:57 Config A/D Result=40 09:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:57 Get A/D filter: -9.255963e+061 result=40 09:21:57 Get A/D value=-858993460 result=40 09:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:57 Aux= 09:21:57 Message to Camera, serial 269873 queued 09:22:34 Received message from Master: op=PointingHead serial=269886 09:22:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:22:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:22:34 Point started: ret=0 09:22:34 point_skyscan result=0 09:22:35 Check angles 09:22:35 SkyScan query 09:22:35 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 09:22:35 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 09:22:36 Check angles 09:22:36 SkyScan query 09:22:36 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 09:22:36 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 09:22:36 Check angles 09:22:36 SkyScan query 09:22:37 SkyScan query done: ret=0 az=144.135<-9609 ze=38.505<-9433 Statuses=0009 0008 09:22:37 Msec=1500 True Az=144.135 Ze=38.505 Az status=0009 Ze status=0008 09:22:37 Check angles 09:22:37 SkyScan query 09:22:38 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 09:22:38 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 09:22:38 Check angles 09:22:38 SkyScan query 09:22:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:22:38 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:22:39 Check angles 09:22:39 SkyScan query 09:22:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:22:39 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 09:22:39 Message to Master queued w/err=0: serial=269886 error=0 09:22:44 Received message from Master: op=Filter serial=269887 09:22:44 Color wheel filter change from 0 to 0 09:22:44 FLIGetFilterPos err=0 currentPosition=0 09:22:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:44 Filter is already there-color wheel unchanged 09:22:44 Received message from Master: op=Shutter serial=269888 09:22:44 Shutter LASER close 09:22:44 Received message from Camera: op=State serial=269890 09:22:44 GetSingleValue result=40 Value=cccccccc 09:22:44 SkyScan query 09:22:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:22:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:45 Parameters OK 09:22:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:45 Set A/D data flow result=40 09:22:45 Set A/D channel type result=40 09:22:45 Set A/D encoding result=40 09:22:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:45 Set channel filter=0.000000e+000 result=40 09:22:45 Config A/D Result=40 09:22:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:45 Get A/D filter: -9.255963e+061 result=40 09:22:45 Get A/D value=-858993460 result=40 09:22:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:45 Parameters OK 09:22:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:45 Set A/D data flow result=40 09:22:45 Set A/D channel type result=40 09:22:45 Set A/D encoding result=40 09:22:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:45 Set channel filter=0.000000e+000 result=40 09:22:45 Config A/D Result=40 09:22:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:45 Get A/D filter: -9.255963e+061 result=40 09:22:45 Get A/D value=-858993460 result=40 09:22:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:45 Aux= 09:22:45 Message to Camera, serial 269890 queued 09:23:22 Received message from Master: op=PointingHead serial=269903 09:23:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:23:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:23:22 Point started: ret=0 09:23:22 point_skyscan result=0 09:23:23 Check angles 09:23:23 SkyScan query 09:23:24 SkyScan query done: ret=0 az=153.195<-10213 ze=9<-11400 Statuses=0009 0009 09:23:24 Msec=0 True Az=153.195 Ze=9 Az status=0009 Ze status=0009 09:23:24 Check angles 09:23:24 SkyScan query 09:23:24 SkyScan query done: ret=0 az=135.735<-9049 ze=-12.015<-12801 Statuses=0009 0009 09:23:24 Msec=750 True Az=135.735 Ze=-12.015 Az status=0009 Ze status=0009 09:23:24 Check angles 09:23:24 SkyScan query 09:23:25 SkyScan query done: ret=0 az=118.23<-7882 ze=-32.925<-14195 Statuses=0009 0009 09:23:25 Msec=1500 True Az=118.23 Ze=-32.925 Az status=0009 Ze status=0009 09:23:25 Check angles 09:23:25 SkyScan query 09:23:26 SkyScan query done: ret=0 az=100.83<-6722 ze=-51.51<-15434 Statuses=0009 0009 09:23:26 Msec=2250 True Az=100.83 Ze=-51.51 Az status=0009 Ze status=0009 09:23:26 Check angles 09:23:26 SkyScan query 09:23:27 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 09:23:27 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 09:23:27 Check angles 09:23:27 SkyScan query 09:23:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:23:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:23:27 Message to Master queued w/err=0: serial=269903 error=0 09:23:32 Received message from Master: op=Filter serial=269904 09:23:32 Color wheel filter change from 0 to 0 09:23:32 FLIGetFilterPos err=0 currentPosition=0 09:23:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:32 Filter is already there-color wheel unchanged 09:23:32 Received message from Master: op=Shutter serial=269905 09:23:32 Shutter LASER close 09:23:32 Received message from Camera: op=State serial=269907 09:23:32 GetSingleValue result=40 Value=cccccccc 09:23:32 SkyScan query 09:23:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:23:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:33 Parameters OK 09:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:33 Set A/D data flow result=40 09:23:33 Set A/D channel type result=40 09:23:33 Set A/D encoding result=40 09:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:33 Set channel filter=0.000000e+000 result=40 09:23:33 Config A/D Result=40 09:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:33 Get A/D filter: -9.255963e+061 result=40 09:23:33 Get A/D value=-858993460 result=40 09:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:33 Parameters OK 09:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:33 Set A/D data flow result=40 09:23:33 Set A/D channel type result=40 09:23:33 Set A/D encoding result=40 09:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:33 Set channel filter=0.000000e+000 result=40 09:23:33 Config A/D Result=40 09:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:33 Get A/D filter: -9.255963e+061 result=40 09:23:33 Get A/D value=-858993460 result=40 09:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:33 Aux= 09:23:33 Message to Camera, serial 269907 queued 09:24:10 Received message from Master: op=PointingHead serial=269920 09:24:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:24:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:24:10 Point started: ret=0 09:24:10 point_skyscan result=0 09:24:11 Check angles 09:24:11 SkyScan query 09:24:12 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.105<-17407 Statuses=0009 0009 09:24:12 Msec=0 True Az=108.825 Ze=-81.105 Az status=0009 Ze status=0009 09:24:12 Check angles 09:24:12 SkyScan query 09:24:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.105<-18807 Statuses=0008 0009 09:24:12 Msec=750 True Az=112.995 Ze=-102.105 Az status=0008 Ze status=0009 09:24:12 Check angles 09:24:12 SkyScan query 09:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 09:24:13 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 09:24:13 Check angles 09:24:13 SkyScan query 09:24:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 09:24:14 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 09:24:14 Check angles 09:24:14 SkyScan query 09:24:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 09:24:15 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 09:24:15 Check angles 09:24:15 SkyScan query 09:24:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:24:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:24:15 Message to Master queued w/err=0: serial=269920 error=0 09:24:20 Received message from Master: op=Filter serial=269921 09:24:20 Color wheel filter change from 0 to 0 09:24:20 FLIGetFilterPos err=0 currentPosition=0 09:24:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:20 Filter is already there-color wheel unchanged 09:24:21 Received message from Master: op=Shutter serial=269922 09:24:21 Shutter LASER open 09:24:21 Received message from Camera: op=State serial=269924 09:24:21 GetSingleValue result=40 Value=cccccccc 09:24:21 SkyScan query 09:24:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:24:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:21 Parameters OK 09:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:21 Set A/D data flow result=40 09:24:21 Set A/D channel type result=40 09:24:21 Set A/D encoding result=40 09:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:21 Set channel filter=0.000000e+000 result=40 09:24:21 Config A/D Result=40 09:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:21 Get A/D filter: -9.255963e+061 result=40 09:24:21 Get A/D value=-858993460 result=40 09:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:21 Parameters OK 09:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:21 Set A/D data flow result=40 09:24:21 Set A/D channel type result=40 09:24:21 Set A/D encoding result=40 09:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:21 Set channel filter=0.000000e+000 result=40 09:24:21 Config A/D Result=40 09:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:21 Get A/D filter: -9.255963e+061 result=40 09:24:21 Get A/D value=-858993460 result=40 09:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:21 Aux= 09:24:21 Message to Camera, serial 269924 queued 09:24:30 Received message from Master: op=Shutter serial=269934 09:24:30 Shutter LASER close 09:24:30 Received message from Master: op=PointingHead serial=269938 09:24:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:24:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:24:30 Point started: ret=0 09:24:30 point_skyscan result=0 09:24:31 Check angles 09:24:31 SkyScan query 09:24:32 SkyScan query done: ret=0 az=89.655<-5977 ze=156.99<-1534 Statuses=0009 0009 09:24:32 Msec=0 True Az=89.655 Ze=156.99 Az status=0009 Ze status=0009 09:24:32 Check angles 09:24:32 SkyScan query 09:24:33 SkyScan query done: ret=0 az=72.27<-4818 ze=136.095<-2927 Statuses=0009 0009 09:24:33 Msec=750 True Az=72.27 Ze=136.095 Az status=0009 Ze status=0009 09:24:33 Check angles 09:24:33 SkyScan query 09:24:33 SkyScan query done: ret=0 az=54.795<-3653 ze=115.095<-4327 Statuses=0009 0009 09:24:33 Msec=1500 True Az=54.795 Ze=115.095 Az status=0009 Ze status=0009 09:24:33 Check angles 09:24:33 SkyScan query 09:24:34 SkyScan query done: ret=0 az=40.995<-2733 ze=94.17<-5722 Statuses=0009 0009 09:24:34 Msec=2250 True Az=40.995 Ze=94.17 Az status=0009 Ze status=0009 09:24:34 Check angles 09:24:34 SkyScan query 09:24:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 09:24:35 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 09:24:35 Check angles 09:24:35 SkyScan query 09:24:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 09:24:36 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 09:24:36 Check angles 09:24:36 SkyScan query 09:24:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:24:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:24:36 Message to Master queued w/err=0: serial=269938 error=0 09:24:41 Received message from Master: op=Filter serial=269939 09:24:41 Color wheel filter change from 0 to 0 09:24:41 FLIGetFilterPos err=0 currentPosition=0 09:24:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:41 Filter is already there-color wheel unchanged 09:24:42 Received message from Master: op=Shutter serial=269940 09:24:42 Shutter LASER close 09:24:42 Received message from Camera: op=State serial=269942 09:24:42 GetSingleValue result=40 Value=cccccccc 09:24:42 SkyScan query 09:24:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:24:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:42 Parameters OK 09:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:42 Set A/D data flow result=40 09:24:42 Set A/D channel type result=40 09:24:42 Set A/D encoding result=40 09:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:42 Set channel filter=0.000000e+000 result=40 09:24:42 Config A/D Result=40 09:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:42 Get A/D filter: -9.255963e+061 result=40 09:24:42 Get A/D value=-858993460 result=40 09:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:42 Parameters OK 09:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:42 Set A/D data flow result=40 09:24:42 Set A/D channel type result=40 09:24:42 Set A/D encoding result=40 09:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:42 Set channel filter=0.000000e+000 result=40 09:24:42 Config A/D Result=40 09:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:42 Get A/D filter: -9.255963e+061 result=40 09:24:42 Get A/D value=-858993460 result=40 09:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:42 Aux= 09:24:42 Message to Camera, serial 269942 queued 09:25:19 Received message from Master: op=PointingHead serial=269955 09:25:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:25:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:25:19 Point started: ret=0 09:25:19 point_skyscan result=0 09:25:20 Check angles 09:25:20 SkyScan query 09:25:21 SkyScan query done: ret=0 az=64.2<-4280 ze=66.525<-7565 Statuses=0009 0008 09:25:21 Msec=0 True Az=64.2 Ze=66.525 Az status=0009 Ze status=0008 09:25:21 Check angles 09:25:21 SkyScan query 09:25:22 SkyScan query done: ret=0 az=81.585<-5439 ze=66.51<-7566 Statuses=0009 0008 09:25:22 Msec=750 True Az=81.585 Ze=66.51 Az status=0009 Ze status=0008 09:25:22 Check angles 09:25:22 SkyScan query 09:25:22 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 09:25:22 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 09:25:22 Check angles 09:25:22 SkyScan query 09:25:23 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 09:25:23 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 09:25:23 Check angles 09:25:23 SkyScan query 09:25:24 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 09:25:24 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 09:25:24 Check angles 09:25:24 SkyScan query 09:25:25 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 09:25:25 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 09:25:25 Check angles 09:25:25 SkyScan query 09:25:25 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:25:25 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:25:25 Message to Master queued w/err=0: serial=269955 error=0 09:25:30 Received message from Master: op=Filter serial=269956 09:25:30 Color wheel filter change from 0 to 0 09:25:30 FLIGetFilterPos err=0 currentPosition=0 09:25:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:30 Filter is already there-color wheel unchanged 09:25:31 Received message from Master: op=Shutter serial=269957 09:25:31 Shutter LASER close 09:25:31 Received message from Camera: op=State serial=269959 09:25:31 GetSingleValue result=40 Value=cccccccc 09:25:31 SkyScan query 09:25:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:25:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:31 Parameters OK 09:25:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:31 Set A/D data flow result=40 09:25:31 Set A/D channel type result=40 09:25:31 Set A/D encoding result=40 09:25:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:31 Set channel filter=0.000000e+000 result=40 09:25:31 Config A/D Result=40 09:25:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:31 Get A/D filter: -9.255963e+061 result=40 09:25:31 Get A/D value=-858993460 result=40 09:25:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:31 Parameters OK 09:25:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:31 Set A/D data flow result=40 09:25:31 Set A/D channel type result=40 09:25:31 Set A/D encoding result=40 09:25:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:31 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-19 09:25:31] 09:25:31 Config A/D Result=40 09:25:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:31 Get A/D filter: -9.255963e+061 result=40 09:25:31 Get A/D value=-858993460 result=40 09:25:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:31 Aux= 09:25:31 Message to Camera, serial 269959 queued 09:26:08 Received message from Master: op=PointingHead serial=269972 09:26:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:26:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:26:08 Point started: ret=0 09:26:08 point_skyscan result=0 09:26:09 Check angles 09:26:09 SkyScan query 09:26:10 SkyScan query done: ret=0 az=134.82<-8988 ze=96.465<-5569 Statuses=0009 0009 09:26:10 Msec=0 True Az=134.82 Ze=96.465 Az status=0009 Ze status=0009 09:26:10 Check angles 09:26:10 SkyScan query 09:26:11 SkyScan query done: ret=0 az=130.995<-8733 ze=117.45<-4170 Statuses=0008 0009 09:26:11 Msec=750 True Az=130.995 Ze=117.45 Az status=0008 Ze status=0009 09:26:11 Check angles 09:26:11 SkyScan query 09:26:11 SkyScan query done: ret=0 az=130.995<-8733 ze=138.315<-2779 Statuses=0008 0009 09:26:11 Msec=1500 True Az=130.995 Ze=138.315 Az status=0008 Ze status=0009 09:26:11 Check angles 09:26:11 SkyScan query 09:26:12 SkyScan query done: ret=0 az=130.995<-8733 ze=159.33<-1378 Statuses=0008 0009 09:26:12 Msec=2250 True Az=130.995 Ze=159.33 Az status=0008 Ze status=0009 09:26:12 Check angles 09:26:12 SkyScan query 09:26:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.745<-23983 Statuses=0008 0009 09:26:13 Msec=3000 True Az=130.995 Ze=-179.745 Az status=0008 Ze status=0009 09:26:13 Check angles 09:26:13 SkyScan query 09:26:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.775<-22585 Statuses=0008 0009 09:26:14 Msec=3750 True Az=130.995 Ze=-158.775 Az status=0008 Ze status=0009 09:26:14 Check angles 09:26:14 SkyScan query 09:26:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 09:26:14 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 09:26:14 Check angles 09:26:14 SkyScan query 09:26:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:26:15 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:26:15 Message to Master queued w/err=0: serial=269972 error=0 09:26:20 Received message from Master: op=Filter serial=269973 09:26:20 Color wheel filter change from 0 to 0 09:26:20 FLIGetFilterPos err=0 currentPosition=0 09:26:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:20 Filter is already there-color wheel unchanged 09:26:20 Received message from Master: op=Shutter serial=269974 09:26:20 Shutter LASER close 09:26:20 Received message from Camera: op=State serial=269976 09:26:20 GetSingleValue result=40 Value=cccccccc 09:26:20 SkyScan query 09:26:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:26:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:21 Parameters OK 09:26:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:21 Set A/D data flow result=40 09:26:21 Set A/D channel type result=40 09:26:21 Set A/D encoding result=40 09:26:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:21 Set channel filter=0.000000e+000 result=40 09:26:21 Config A/D Result=40 09:26:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:21 Get A/D filter: -9.255963e+061 result=40 09:26:21 Get A/D value=-858993460 result=40 09:26:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:21 Parameters OK 09:26:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:21 Set A/D data flow result=40 09:26:21 Set A/D channel type result=40 09:26:21 Set A/D encoding result=40 09:26:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:21 Set channel filter=0.000000e+000 result=40 09:26:21 Config A/D Result=40 09:26:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:21 Get A/D filter: -9.255963e+061 result=40 09:26:21 Get A/D value=-858993460 result=40 09:26:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:21 Aux= 09:26:21 Message to Camera, serial 269976 queued 09:26:58 Received message from Master: op=PointingHead serial=269989 09:26:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:26:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:26:58 Point started: ret=0 09:26:58 point_skyscan result=0 09:26:59 Check angles 09:26:59 SkyScan query 09:26:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.375<-23425 Statuses=0009 0009 09:26:59 Msec=0 True Az=113.01 Ze=-171.375 Az status=0009 Ze status=0009 09:27:00 Check angles 09:27:00 SkyScan query 09:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:27:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:27:00 Message to Master queued w/err=0: serial=269989 error=0 09:27:05 Received message from Master: op=Filter serial=269990 09:27:05 Color wheel filter change from 0 to 0 09:27:05 FLIGetFilterPos err=0 currentPosition=0 09:27:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:05 Filter is already there-color wheel unchanged 09:27:05 Received message from Master: op=Shutter serial=269991 09:27:05 Shutter LASER open 09:27:05 Received message from Camera: op=State serial=269993 09:27:05 GetSingleValue result=40 Value=cccccccc 09:27:05 SkyScan query 09:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:06 Parameters OK 09:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:06 Set A/D data flow result=40 09:27:06 Set A/D channel type result=40 09:27:06 Set A/D encoding result=40 09:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:06 Set channel filter=0.000000e+000 result=40 09:27:06 Config A/D Result=40 09:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:06 Get A/D filter: -9.255963e+061 result=40 09:27:06 Get A/D value=-858993460 result=40 09:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:06 Parameters OK 09:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:06 Set A/D data flow result=40 09:27:06 Set A/D channel type result=40 09:27:06 Set A/D encoding result=40 09:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:06 Set channel filter=0.000000e+000 result=40 09:27:06 Config A/D Result=40 09:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:06 Get A/D filter: -9.255963e+061 result=40 09:27:06 Get A/D value=-858993460 result=40 09:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:06 Aux= 09:27:06 Message to Camera, serial 269993 queued 09:27:14 Received message from Master: op=Shutter serial=270003 09:27:14 Shutter LASER close 09:27:15 Received message from Master: op=PointingHead serial=270007 09:27:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:27:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:27:15 Point started: ret=0 09:27:15 point_skyscan result=0 09:27:16 Check angles 09:27:16 SkyScan query 09:27:17 SkyScan query done: ret=0 az=136.455<-9097 ze=-142.815<-21521 Statuses=0009 0009 09:27:17 Msec=0 True Az=136.455 Ze=-142.815 Az status=0009 Ze status=0009 09:27:17 Check angles 09:27:17 SkyScan query 09:27:18 SkyScan query done: ret=0 az=153.915<-10261 ze=-121.815<-20121 Statuses=0009 0009 09:27:18 Msec=750 True Az=153.915 Ze=-121.815 Az status=0009 Ze status=0009 09:27:18 Check angles 09:27:18 SkyScan query 09:27:18 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.83<-18722 Statuses=0009 0009 09:27:18 Msec=1500 True Az=171.45 Ze=-100.83 Az status=0009 Ze status=0009 09:27:18 Check angles 09:27:18 SkyScan query 09:27:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 09:27:19 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 09:27:19 Check angles 09:27:19 SkyScan query 09:27:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 09:27:20 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 09:27:20 Check angles 09:27:20 SkyScan query 09:27:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 09:27:21 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 09:27:21 Message to Master queued w/err=0: serial=270007 error=0 09:27:26 Received message from Master: op=Filter serial=270008 09:27:26 Color wheel filter change from 0 to 0 09:27:26 FLIGetFilterPos err=0 currentPosition=0 09:27:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:26 Filter is already there-color wheel unchanged 09:27:26 Received message from Master: op=Shutter serial=270009 09:27:26 Shutter LASER close 09:27:26 Received message from Camera: op=State serial=270011 09:27:26 GetSingleValue result=40 Value=cccccccc 09:27:26 SkyScan query 09:27:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:27:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:27 Parameters OK 09:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:27 Set A/D data flow result=40 09:27:27 Set A/D channel type result=40 09:27:27 Set A/D encoding result=40 09:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:27 Set channel filter=0.000000e+000 result=40 09:27:27 Config A/D Result=40 09:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:27 Get A/D filter: -9.255963e+061 result=40 09:27:27 Get A/D value=-858993460 result=40 09:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:27 Parameters OK 09:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:27 Set A/D data flow result=40 09:27:27 Set A/D channel type result=40 09:27:27 Set A/D encoding result=40 09:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:27 Set channel filter=0.000000e+000 result=40 09:27:27 Config A/D Result=40 09:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:27 Get A/D filter: -9.255963e+061 result=40 09:27:27 Get A/D value=-858993460 result=40 09:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:27 Aux= 09:27:27 Message to Camera, serial 270011 queued 09:28:03 Received message from Master: op=PointingHead serial=270024 09:28:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:28:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:28:04 Point started: ret=0 09:28:04 point_skyscan result=0 09:28:04 Check angles 09:28:04 SkyScan query 09:28:05 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.795<-13453 Statuses=0009 0009 09:28:05 Msec=0 True Az=152.97 Ze=-21.795 Az status=0009 Ze status=0009 09:28:05 Check angles 09:28:05 SkyScan query 09:28:06 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.75<-12050 Statuses=0009 0009 09:28:06 Msec=750 True Az=135.405 Ze=-0.75 Az status=0009 Ze status=0009 09:28:06 Check angles 09:28:06 SkyScan query 09:28:07 SkyScan query done: ret=0 az=118.005<-7867 ze=20.13<-10658 Statuses=0009 0009 09:28:07 Msec=1500 True Az=118.005 Ze=20.13 Az status=0009 Ze status=0009 09:28:07 Check angles 09:28:07 SkyScan query 09:28:07 SkyScan query done: ret=0 az=100.545<-6703 ze=41.175<-9255 Statuses=0009 0009 09:28:07 Msec=2250 True Az=100.545 Ze=41.175 Az status=0009 Ze status=0009 09:28:07 Check angles 09:28:07 SkyScan query 09:28:08 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 09:28:08 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 09:28:08 Check angles 09:28:08 SkyScan query 09:28:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:28:09 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:28:09 Message to Master queued w/err=0: serial=270024 error=0 09:28:14 Received message from Master: op=Filter serial=270025 09:28:14 Color wheel filter change from 0 to 0 09:28:14 FLIGetFilterPos err=0 currentPosition=0 09:28:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:14 Filter is already there-color wheel unchanged 09:28:14 Received message from Master: op=Shutter serial=270026 09:28:14 Shutter LASER close 09:28:14 Received message from Camera: op=State serial=270028 09:28:14 GetSingleValue result=40 Value=cccccccc 09:28:14 SkyScan query 09:28:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:28:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:15 Parameters OK 09:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:15 Set A/D data flow result=40 09:28:15 Set A/D channel type result=40 09:28:15 Set A/D encoding result=40 09:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:15 Set channel filter=0.000000e+000 result=40 09:28:15 Config A/D Result=40 09:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:15 Get A/D filter: -9.255963e+061 result=40 09:28:15 Get A/D value=-858993460 result=40 09:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:15 Parameters OK 09:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:15 Set A/D data flow result=40 09:28:15 Set A/D channel type result=40 09:28:15 Set A/D encoding result=40 09:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:15 Set channel filter=0.000000e+000 result=40 09:28:15 Config A/D Result=40 09:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:15 Get A/D filter: -9.255963e+061 result=40 09:28:15 Get A/D value=-858993460 result=40 09:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:15 Aux= 09:28:15 Message to Camera, serial 270028 queued 09:28:51 Received message from Master: op=PointingHead serial=270041 09:28:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:28:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:28:52 Point started: ret=0 09:28:52 point_skyscan result=0 09:28:52 Check angles 09:28:52 SkyScan query 09:28:53 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 09:28:53 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 09:28:53 Check angles 09:28:53 SkyScan query 09:28:54 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 09:28:54 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 09:28:54 Check angles 09:28:54 SkyScan query 09:28:55 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 09:28:55 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 09:28:55 Check angles 09:28:55 SkyScan query 09:28:55 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 09:28:55 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 09:28:55 Check angles 09:28:55 SkyScan query 09:28:56 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:28:56 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:28:56 Check angles 09:28:56 SkyScan query 09:28:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:28:57 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 09:28:57 Message to Master queued w/err=0: serial=270041 error=0 09:29:02 Received message from Master: op=Filter serial=270042 09:29:02 Color wheel filter change from 0 to 0 09:29:02 FLIGetFilterPos err=0 currentPosition=0 09:29:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:02 Filter is already there-color wheel unchanged 09:29:02 Received message from Master: op=Shutter serial=270043 09:29:02 Shutter LASER close 09:29:02 Received message from Camera: op=State serial=270045 09:29:02 GetSingleValue result=40 Value=cccccccc 09:29:02 SkyScan query 09:29:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:29:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:03 Parameters OK 09:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:03 Set A/D data flow result=40 09:29:03 Set A/D channel type result=40 09:29:03 Set A/D encoding result=40 09:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:03 Set channel filter=0.000000e+000 result=40 09:29:03 Config A/D Result=40 09:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:03 Get A/D filter: -9.255963e+061 result=40 09:29:03 Get A/D value=-858993460 result=40 09:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:03 Parameters OK 09:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:03 Set A/D data flow result=40 09:29:03 Set A/D channel type result=40 09:29:03 Set A/D encoding result=40 09:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:03 Set channel filter=0.000000e+000 result=40 09:29:03 Config A/D Result=40 09:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:03 Get A/D filter: -9.255963e+061 result=40 09:29:03 Get A/D value=-858993460 result=40 09:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:03 Aux= 09:29:03 Message to Camera, serial 270045 queued 09:29:39 Received message from Master: op=PointingHead serial=270057 09:29:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:29:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:29:39 Point started: ret=0 09:29:39 point_skyscan result=0 09:29:40 Check angles 09:29:40 SkyScan query 09:29:40 SkyScan query done: ret=0 az=153.075<-10205 ze=8.835<-11411 Statuses=0009 0009 09:29:40 Msec=0 True Az=153.075 Ze=8.835 Az status=0009 Ze status=0009 09:29:40 Check angles 09:29:40 SkyScan query 09:29:41 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.15<-12810 Statuses=0009 0009 09:29:41 Msec=750 True Az=135.675 Ze=-12.15 Az status=0009 Ze status=0009 09:29:41 Check angles 09:29:41 SkyScan query 09:29:42 SkyScan query done: ret=0 az=118.11<-7874 ze=-33.09<-14206 Statuses=0009 0009 09:29:42 Msec=1500 True Az=118.11 Ze=-33.09 Az status=0009 Ze status=0009 09:29:42 Check angles 09:29:42 SkyScan query 09:29:42 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 09:29:42 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 09:29:43 Check angles 09:29:43 SkyScan query 09:29:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 09:29:43 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 09:29:43 Check angles 09:29:43 SkyScan query 09:29:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:29:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:29:44 Message to Master queued w/err=0: serial=270057 error=0 09:29:49 Received message from Master: op=Filter serial=270058 09:29:49 Color wheel filter change from 0 to 0 09:29:49 FLIGetFilterPos err=0 currentPosition=0 09:29:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:49 Filter is already there-color wheel unchanged 09:29:49 Received message from Master: op=Shutter serial=270059 09:29:49 Shutter LASER close 09:29:49 Received message from Camera: op=State serial=270061 09:29:49 GetSingleValue result=40 Value=cccccccc 09:29:49 SkyScan query 09:29:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:29:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:50 Parameters OK 09:29:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:50 Set A/D data flow result=40 09:29:50 Set A/D channel type result=40 09:29:50 Set A/D encoding result=40 09:29:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:50 Set channel filter=0.000000e+000 result=40 09:29:50 Config A/D Result=40 09:29:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:50 Get A/D filter: -9.255963e+061 result=40 09:29:50 Get A/D value=-858993460 result=40 09:29:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:50 Parameters OK 09:29:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:50 Set A/D data flow result=40 09:29:50 Set A/D channel type result=40 09:29:50 Set A/D encoding result=40 09:29:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:50 Set channel filter=0.000000e+000 result=40 09:29:50 Config A/D Result=40 09:29:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:50 Get A/D filter: -9.255963e+061 result=40 09:29:50 Get A/D value=-858993460 result=40 09:29:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:50 Aux= 09:29:50 Message to Camera, serial 270061 queued 09:30:27 Received message from Master: op=PointingHead serial=270074 09:30:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:30:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:30:27 Point started: ret=0 09:30:27 point_skyscan result=0 09:30:28 Check angles 09:30:28 SkyScan query 09:30:28 SkyScan query done: ret=0 az=108.81<-7254 ze=-80.955<-17397 Statuses=0009 0009 09:30:28 Msec=0 True Az=108.81 Ze=-80.955 Az status=0009 Ze status=0009 09:30:28 Check angles 09:30:28 SkyScan query 09:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 09:30:29 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 09:30:29 Check angles 09:30:29 SkyScan query 09:30:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.88<-20192 Statuses=0008 0009 09:30:30 Msec=1500 True Az=112.995 Ze=-122.88 Az status=0008 Ze status=0009 09:30:30 Check angles 09:30:30 SkyScan query 09:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.27<-21618 Statuses=0008 0009 09:30:31 Msec=2250 True Az=112.995 Ze=-144.27 Az status=0008 Ze status=0009 09:30:31 Check angles 09:30:31 SkyScan query 09:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.255<-23017 Statuses=0008 0009 09:30:31 Msec=3000 True Az=112.995 Ze=-165.255 Az status=0008 Ze status=0009 09:30:31 Check angles 09:30:31 SkyScan query 09:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:30:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:30:32 Message to Master queued w/err=0: serial=270074 error=0 09:30:37 Received message from Master: op=Filter serial=270075 09:30:37 Color wheel filter change from 0 to 0 09:30:37 FLIGetFilterPos err=0 currentPosition=0 09:30:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:37 Filter is already there-color wheel unchanged 09:30:37 Received message from Master: op=Shutter serial=270076 09:30:37 Shutter LASER open 09:30:37 Received message from Camera: op=State serial=270078 09:30:37 GetSingleValue result=40 Value=cccccccc 09:30:37 SkyScan query 09:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:30:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:38 Parameters OK 09:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:38 Set A/D data flow result=40 09:30:38 Set A/D channel type result=40 09:30:38 Set A/D encoding result=40 09:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:38 Set channel filter=0.000000e+000 result=40 09:30:38 Config A/D Result=40 09:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:38 Get A/D filter: -9.255963e+061 result=40 09:30:38 Get A/D value=-858993460 result=40 09:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:38 Parameters OK 09:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:38 Set A/D data flow result=40 09:30:38 Set A/D channel type result=40 09:30:38 Set A/D encoding result=40 09:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:38 Set channel filter=0.000000e+000 result=40 09:30:38 Config A/D Result=40 09:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:38 Get A/D filter: -9.255963e+061 result=40 09:30:38 Get A/D value=-858993460 result=40 09:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:38 Aux= 09:30:38 Message to Camera, serial 270078 queued 09:30:46 Received message from Master: op=Shutter serial=270088 09:30:46 Shutter LASER close 09:30:47 Received message from Master: op=PointingHead serial=270092 09:30:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:30:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:30:47 Point started: ret=0 09:30:47 point_skyscan result=0 09:30:48 Check angles 09:30:48 SkyScan query 09:30:49 SkyScan query done: ret=0 az=90.03<-6002 ze=157.35<-1510 Statuses=0009 0009 09:30:49 Msec=0 True Az=90.03 Ze=157.35 Az status=0009 Ze status=0009 09:30:49 Check angles 09:30:49 SkyScan query 09:30:49 SkyScan query done: ret=0 az=72.495<-4833 ze=136.395<-2907 Statuses=0009 0009 09:30:49 Msec=750 True Az=72.495 Ze=136.395 Az status=0009 Ze status=0009 09:30:49 Check angles 09:30:49 SkyScan query 09:30:50 SkyScan query done: ret=0 az=55.17<-3678 ze=115.485<-4301 Statuses=0009 0009 09:30:50 Msec=1500 True Az=55.17 Ze=115.485 Az status=0009 Ze status=0009 09:30:50 Check angles 09:30:50 SkyScan query 09:30:51 SkyScan query done: ret=0 az=41.01<-2734 ze=94.515<-5699 Statuses=0009 0009 09:30:51 Msec=2250 True Az=41.01 Ze=94.515 Az status=0009 Ze status=0009 09:30:51 Check angles 09:30:51 SkyScan query 09:30:52 SkyScan query done: ret=0 az=40.995<-2733 ze=73.56<-7096 Statuses=0008 0009 09:30:52 Msec=3000 True Az=40.995 Ze=73.56 Az status=0008 Ze status=0009 09:30:52 Check angles 09:30:52 SkyScan query 09:30:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.95<-8470 Statuses=0008 0009 09:30:52 Msec=3750 True Az=40.995 Ze=52.95 Az status=0008 Ze status=0009 09:30:52 Check angles 09:30:52 SkyScan query 09:30:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:30:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:30:53 Message to Master queued w/err=0: serial=270092 error=0 09:30:58 Received message from Master: op=Filter serial=270093 09:30:58 Color wheel filter change from 0 to 0 09:30:58 FLIGetFilterPos err=0 currentPosition=0 09:30:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:58 Filter is already there-color wheel unchanged 09:30:58 Received message from Master: op=Shutter serial=270094 09:30:58 Shutter LASER close 09:30:58 Received message from Camera: op=State serial=270096 09:30:58 GetSingleValue result=40 Value=cccccccc 09:30:58 SkyScan query 09:30:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:30:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:59 Parameters OK 09:30:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:59 Set A/D data flow result=40 09:30:59 Set A/D channel type result=40 09:30:59 Set A/D encoding result=40 09:30:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:59 Set channel filter=0.000000e+000 result=40 09:30:59 Config A/D Result=40 09:30:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:59 Get A/D filter: -9.255963e+061 result=40 09:30:59 Get A/D value=-858993460 result=40 09:30:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:59 Parameters OK 09:30:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:59 Set A/D data flow result=40 09:30:59 Set A/D channel type result=40 09:30:59 Set A/D encoding result=40 09:30:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:59 Set channel filter=0.000000e+000 result=40 09:30:59 Config A/D Result=40 09:30:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:59 Get A/D filter: -9.255963e+061 result=40 09:30:59 Get A/D value=-858993460 result=40 09:30:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:59 Aux= 09:30:59 Message to Camera, serial 270096 queued 09:31:36 Received message from Master: op=PointingHead serial=270109 09:31:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:31:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:31:36 Point started: ret=0 09:31:36 point_skyscan result=0 09:31:37 Check angles 09:31:37 SkyScan query 09:31:37 SkyScan query done: ret=0 az=63.795<-4253 ze=66.525<-7565 Statuses=0009 0008 09:31:37 Msec=0 True Az=63.795 Ze=66.525 Az status=0009 Ze status=0008 09:31:38 Check angles 09:31:38 SkyScan query 09:31:38 SkyScan query done: ret=0 az=81.195<-5413 ze=66.51<-7566 Statuses=0009 0008 09:31:38 Msec=750 True Az=81.195 Ze=66.51 Az status=0009 Ze status=0008 09:31:38 Check angles 09:31:38 SkyScan query 09:31:39 SkyScan query done: ret=0 az=98.805<-6587 ze=66.495<-7567 Statuses=0009 0008 09:31:39 Msec=1500 True Az=98.805 Ze=66.495 Az status=0009 Ze status=0008 09:31:39 Check angles 09:31:39 SkyScan query 09:31:40 SkyScan query done: ret=0 az=116.115<-7741 ze=66.495<-7567 Statuses=0009 0008 09:31:40 Msec=2250 True Az=116.115 Ze=66.495 Az status=0009 Ze status=0008 09:31:40 Check angles 09:31:40 SkyScan query 09:31:40 SkyScan query done: ret=0 az=133.56<-8904 ze=66.495<-7567 Statuses=0009 0008 09:31:40 Msec=3000 True Az=133.56 Ze=66.495 Az status=0009 Ze status=0008 09:31:41 Check angles 09:31:41 SkyScan query 09:31:41 SkyScan query done: ret=0 az=151.17<-10078 ze=66.495<-7567 Statuses=0009 0008 09:31:41 Msec=3750 True Az=151.17 Ze=66.495 Az status=0009 Ze status=0008 09:31:41 Check angles 09:31:41 SkyScan query 09:31:42 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:31:42 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:31:42 Message to Master queued w/err=0: serial=270109 error=0 09:31:47 Received message from Master: op=Filter serial=270110 09:31:47 Color wheel filter change from 0 to 0 09:31:47 FLIGetFilterPos err=0 currentPosition=0 09:31:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:47 Filter is already there-color wheel unchanged 09:31:47 Received message from Master: op=Shutter serial=270111 09:31:47 Shutter LASER close 09:31:47 Received message from Camera: op=State serial=270113 09:31:47 GetSingleValue result=40 Value=cccccccc 09:31:47 SkyScan query 09:31:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:31:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:48 Parameters OK 09:31:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:48 Set A/D data flow result=40 09:31:48 Set A/D channel type result=40 09:31:48 Set A/D encoding result=40 09:31:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:48 Set channel filter=0.000000e+000 result=40 09:31:48 Config A/D Result=40 09:31:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:48 Get A/D filter: -9.255963e+061 result=40 09:31:48 Get A/D value=-858993460 result=40 09:31:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:48 Parameters OK 09:31:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:48 Set A/D data flow result=40 09:31:48 Set A/D channel type result=40 09:31:48 Set A/D encoding result=40 09:31:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:48 Set channel filter=0.000000e+000 result=40 09:31:48 Config A/D Result=40 09:31:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:48 Get A/D filter: -9.255963e+061 result=40 09:31:48 Get A/D value=-858993460 result=40 09:31:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:48 Aux= 09:31:48 Message to Camera, serial 270113 queued 09:32:25 Received message from Master: op=PointingHead serial=270126 09:32:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:32:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:32:25 Point started: ret=0 09:32:25 point_skyscan result=0 09:32:26 Check angles 09:32:26 SkyScan query 09:32:26 SkyScan query done: ret=0 az=135.12<-9008 ze=96.15<-5590 Statuses=0009 0009 09:32:26 Msec=0 True Az=135.12 Ze=96.15 Az status=0009 Ze status=0009 09:32:27 Check angles 09:32:27 SkyScan query 09:32:27 SkyScan query done: ret=0 az=130.995<-8733 ze=117.12<-4192 Statuses=0008 0009 09:32:27 Msec=750 True Az=130.995 Ze=117.12 Az status=0008 Ze status=0009 09:32:27 Check angles 09:32:27 SkyScan query 09:32:28 SkyScan query done: ret=0 az=130.995<-8733 ze=138.45<-2770 Statuses=0008 0009 09:32:28 Msec=1500 True Az=130.995 Ze=138.45 Az status=0008 Ze status=0009 09:32:28 Check angles 09:32:28 SkyScan query 09:32:29 SkyScan query done: ret=0 az=130.995<-8733 ze=159.84<-1344 Statuses=0008 0009 09:32:29 Msec=2250 True Az=130.995 Ze=159.84 Az status=0008 Ze status=0009 09:32:29 Check angles 09:32:29 SkyScan query 09:32:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.16<-23944 Statuses=0008 0009 09:32:29 Msec=3000 True Az=130.995 Ze=-179.16 Az status=0008 Ze status=0009 09:32:30 Check angles 09:32:30 SkyScan query 09:32:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.8<-22520 Statuses=0008 0009 09:32:30 Msec=3750 True Az=130.995 Ze=-157.8 Az status=0008 Ze status=0009 09:32:30 Check angles 09:32:30 SkyScan query 09:32:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 09:32:31 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 09:32:31 Check angles 09:32:31 SkyScan query 09:32:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:32:32 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:32:32 Message to Master queued w/err=0: serial=270126 error=0 09:32:37 Received message from Master: op=Filter serial=270127 09:32:37 Color wheel filter change from 0 to 0 09:32:37 FLIGetFilterPos err=0 currentPosition=0 09:32:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:37 Filter is already there-color wheel unchanged 09:32:37 Received message from Master: op=Shutter serial=270128 09:32:37 Shutter LASER close 09:32:37 Received message from Camera: op=State serial=270130 09:32:37 GetSingleValue result=40 Value=cccccccc 09:32:37 SkyScan query 09:32:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:32:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:38 Parameters OK 09:32:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:38 Set A/D data flow result=40 09:32:38 Set A/D channel type result=40 09:32:38 Set A/D encoding result=40 09:32:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:38 Set channel filter=0.000000e+000 result=40 09:32:38 Config A/D Result=40 09:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:38 Get A/D filter: -9.255963e+061 result=40 09:32:38 Get A/D value=-858993460 result=40 09:32:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:38 Parameters OK 09:32:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:38 Set A/D data flow result=40 09:32:38 Set A/D channel type result=40 09:32:38 Set A/D encoding result=40 09:32:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:38 Set channel filter=0.000000e+000 result=40 09:32:38 Config A/D Result=40 09:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:38 Get A/D filter: -9.255963e+061 result=40 09:32:38 Get A/D value=-858993460 result=40 09:32:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:38 Aux= 09:32:38 Message to Camera, serial 270130 queued 09:33:14 Received message from Master: op=PointingHead serial=270143 09:33:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:33:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:33:15 Point started: ret=0 09:33:15 point_skyscan result=0 09:33:15 Check angles 09:33:15 SkyScan query 09:33:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 09:33:16 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 09:33:16 Check angles 09:33:16 SkyScan query 09:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:33:17 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:33:17 Message to Master queued w/err=0: serial=270143 error=0 09:33:22 Received message from Master: op=Filter serial=270144 09:33:22 Color wheel filter change from 0 to 0 09:33:22 FLIGetFilterPos err=0 currentPosition=0 09:33:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:22 Filter is already there-color wheel unchanged 09:33:22 Received message from Master: op=Shutter serial=270145 09:33:22 Shutter LASER open 09:33:22 Received message from Camera: op=State serial=270147 09:33:22 GetSingleValue result=40 Value=cccccccc 09:33:22 SkyScan query 09:33:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:33:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:23 Parameters OK 09:33:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:23 Set A/D data flow result=40 09:33:23 Set A/D channel type result=40 09:33:23 Set A/D encoding result=40 09:33:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:23 Set channel filter=0.000000e+000 result=40 09:33:23 Config A/D Result=40 09:33:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:23 Get A/D filter: -9.255963e+061 result=40 09:33:23 Get A/D value=-858993460 result=40 09:33:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:23 Parameters OK 09:33:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:23 Set A/D data flow result=40 09:33:23 Set A/D channel type result=40 09:33:23 Set A/D encoding result=40 09:33:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:23 Set channel filter=0.000000e+000 result=40 09:33:23 Config A/D Result=40 09:33:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:23 Get A/D filter: -9.255963e+061 result=40 09:33:23 Get A/D value=-858993460 result=40 09:33:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:23 Aux= 09:33:23 Message to Camera, serial 270147 queued 09:33:31 Received message from Master: op=Shutter serial=270157 09:33:31 Shutter LASER close 09:33:32 Received message from Master: op=PointingHead serial=270161 09:33:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:33:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:33:32 Point started: ret=0 09:33:32 point_skyscan result=0 09:33:33 Check angles 09:33:33 SkyScan query 09:33:34 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.98<-21532 Statuses=0009 0009 09:33:34 Msec=0 True Az=136.305 Ze=-142.98 Az status=0009 Ze status=0009 09:33:34 Check angles 09:33:34 SkyScan query 09:33:34 SkyScan query done: ret=0 az=154.23<-10282 ze=-121.56<-20104 Statuses=0009 0009 09:33:34 Msec=750 True Az=154.23 Ze=-121.56 Az status=0009 Ze status=0009 09:33:34 Check angles 09:33:34 SkyScan query 09:33:35 SkyScan query done: ret=0 az=171.57<-11438 ze=-100.5<-18700 Statuses=0009 0009 09:33:35 Msec=1500 True Az=171.57 Ze=-100.5 Az status=0009 Ze status=0009 09:33:35 Check angles 09:33:35 SkyScan query 09:33:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.17<-17278 Statuses=0008 0009 09:33:36 Msec=2250 True Az=176.01 Ze=-79.17 Az status=0008 Ze status=0009 09:33:36 Check angles 09:33:36 SkyScan query 09:33:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.84<-15856 Statuses=0008 0009 09:33:37 Msec=3000 True Az=176.01 Ze=-57.84 Az status=0008 Ze status=0009 09:33:37 Check angles 09:33:37 SkyScan query 09:33:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:33:37 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:33:37 Message to Master queued w/err=0: serial=270161 error=0 09:33:42 Received message from Master: op=Filter serial=270162 09:33:42 Color wheel filter change from 0 to 0 09:33:42 FLIGetFilterPos err=0 currentPosition=0 09:33:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:42 Filter is already there-color wheel unchanged 09:33:43 Received message from Master: op=Shutter serial=270163 09:33:43 Shutter LASER close 09:33:43 Received message from Camera: op=State serial=270165 09:33:43 GetSingleValue result=40 Value=cccccccc 09:33:43 SkyScan query 09:33:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:33:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:43 Parameters OK 09:33:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:43 Set A/D data flow result=40 09:33:43 Set A/D channel type result=40 09:33:43 Set A/D encoding result=40 09:33:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:43 Set channel filter=0.000000e+000 result=40 09:33:43 Config A/D Result=40 09:33:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:43 Get A/D filter: -9.255963e+061 result=40 09:33:43 Get A/D value=-858993460 result=40 09:33:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:43 Parameters OK 09:33:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:43 Set A/D data flow result=40 09:33:43 Set A/D channel type result=40 09:33:43 Set A/D encoding result=40 09:33:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:43 Set channel filter=0.000000e+000 result=40 09:33:43 Config A/D Result=40 09:33:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:43 Get A/D filter: -9.255963e+061 result=40 09:33:43 Get A/D value=-858993460 result=40 09:33:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:43 Aux= 09:33:43 Message to Camera, serial 270165 queued 09:34:20 Received message from Master: op=PointingHead serial=270178 09:34:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:34:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:34:20 Point started: ret=0 09:34:20 point_skyscan result=0 09:34:21 Check angles 09:34:21 SkyScan query 09:34:22 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.75<-13450 Statuses=0009 0009 09:34:22 Msec=0 True Az=152.97 Ze=-21.75 Az status=0009 Ze status=0009 09:34:22 Check angles 09:34:22 SkyScan query 09:34:23 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.72<-12048 Statuses=0009 0009 09:34:23 Msec=750 True Az=135.435 Ze=-0.72 Az status=0009 Ze status=0009 09:34:23 Check angles 09:34:23 SkyScan query 09:34:23 SkyScan query done: ret=0 az=118.02<-7868 ze=20.16<-10656 Statuses=0009 0009 09:34:23 Msec=1500 True Az=118.02 Ze=20.16 Az status=0009 Ze status=0009 09:34:23 Check angles 09:34:23 SkyScan query 09:34:24 SkyScan query done: ret=0 az=100.56<-6704 ze=41.19<-9254 Statuses=0009 0009 09:34:24 Msec=2250 True Az=100.56 Ze=41.19 Az status=0009 Ze status=0009 09:34:24 Check angles 09:34:24 SkyScan query 09:34:25 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 09:34:25 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 09:34:25 Check angles 09:34:25 SkyScan query 09:34:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:34:26 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 09:34:26 Message to Master queued w/err=0: serial=270178 error=0 09:34:31 Received message from Master: op=Filter serial=270179 09:34:31 Color wheel filter change from 0 to 0 09:34:31 FLIGetFilterPos err=0 currentPosition=0 09:34:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:31 Filter is already there-color wheel unchanged 09:34:31 Received message from Master: op=Shutter serial=270180 09:34:31 Shutter LASER close 09:34:31 Received message from Camera: op=State serial=270182 09:34:31 GetSingleValue result=40 Value=cccccccc 09:34:31 SkyScan query 09:34:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:34:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:31 Parameters OK 09:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:31 Set A/D data flow result=40 09:34:31 Set A/D channel type result=40 09:34:31 Set A/D encoding result=40 09:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:31 Set channel filter=0.000000e+000 result=40 09:34:31 Config A/D Result=40 09:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:31 Get A/D filter: -9.255963e+061 result=40 09:34:31 Get A/D value=-858993460 result=40 09:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:31 Parameters OK 09:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:31 Set A/D data flow result=40 09:34:31 Set A/D channel type result=40 09:34:31 Set A/D encoding result=40 09:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:31 Set channel filter=0.000000e+000 result=40 09:34:31 Config A/D Result=40 09:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:31 Get A/D filter: -9.255963e+061 result=40 09:34:31 Get A/D value=-858993460 result=40 09:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:31 Aux= 09:34:31 Message to Camera, serial 270182 queued 09:35:08 Received message from Master: op=PointingHead serial=270195 09:35:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:35:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:35:08 Point started: ret=0 09:35:08 point_skyscan result=0 09:35:09 Check angles 09:35:09 SkyScan query 09:35:10 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 09:35:10 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 09:35:10 Check angles 09:35:10 SkyScan query 09:35:11 SkyScan query done: ret=0 az=126.975<-8465 ze=38.505<-9433 Statuses=0009 0008 09:35:11 Msec=750 True Az=126.975 Ze=38.505 Az status=0009 Ze status=0008 09:35:11 Check angles 09:35:11 SkyScan query 09:35:11 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 09:35:11 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 09:35:11 Check angles 09:35:11 SkyScan query 09:35:12 SkyScan query done: ret=0 az=161.925<-10795 ze=38.505<-9433 Statuses=0009 0008 09:35:12 Msec=2250 True Az=161.925 Ze=38.505 Az status=0009 Ze status=0008 09:35:12 Check angles 09:35:12 SkyScan query 09:35:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:35:13 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:35:13 Check angles 09:35:13 SkyScan query 09:35:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:35:14 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 09:35:14 Message to Master queued w/err=0: serial=270195 error=0 09:35:19 Received message from Master: op=Filter serial=270196 09:35:19 Color wheel filter change from 0 to 0 09:35:19 FLIGetFilterPos err=0 currentPosition=0 09:35:19 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:19 Filter is already there-color wheel unchanged 09:35:19 Received message from Master: op=Shutter serial=270197 09:35:19 Shutter LASER close 09:35:19 Received message from Camera: op=State serial=270199 09:35:19 GetSingleValue result=40 Value=cccccccc 09:35:19 SkyScan query 09:35:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:35:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:19 Parameters OK 09:35:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:19 Set A/D data flow result=40 09:35:19 Set A/D channel type result=40 09:35:19 Set A/D encoding result=40 09:35:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:19 Set channel filter=0.000000e+000 result=40 09:35:19 Config A/D Result=40 09:35:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:19 Get A/D filter: -9.255963e+061 result=40 09:35:19 Get A/D value=-858993460 result=40 09:35:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:19 Parameters OK 09:35:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:19 Set A/D data flow result=40 09:35:19 Set A/D channel type result=40 09:35:19 Set A/D encoding result=40 09:35:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:19 Set channel filter=0.000000e+000 result=40 09:35:19 Config A/D Result=40 09:35:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:19 Get A/D filter: -9.255963e+061 result=40 09:35:19 Get A/D value=-858993460 result=40 09:35:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 [UTC 2018-12-19 09:35:19] 09:35:19 Aux= 09:35:19 Message to Camera, serial 270199 queued [UTC 2018-12-19 09:35:52] 09:35:56 Received message from Master: op=PointingHead serial=270212 09:35:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:35:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:35:57 Point started: ret=0 09:35:57 point_skyscan result=0 09:35:57 Check angles 09:35:57 SkyScan query 09:35:58 SkyScan query done: ret=0 az=152.955<-10197 ze=68.385<-7441 Statuses=0009 0009 09:35:58 Msec=0 True Az=152.955 Ze=68.385 Az status=0009 Ze status=0009 09:35:58 Check angles 09:35:58 SkyScan query 09:35:59 SkyScan query done: ret=0 az=135.57<-9038 ze=89.325<-6045 Statuses=0009 0009 09:35:59 Msec=750 True Az=135.57 Ze=89.325 Az status=0009 Ze status=0009 09:35:59 Check angles 09:35:59 SkyScan query 09:36:00 SkyScan query done: ret=0 az=118.02<-7868 ze=110.25<-4650 Statuses=0009 0009 09:36:00 Msec=1500 True Az=118.02 Ze=110.25 Az status=0009 Ze status=0009 09:36:00 Check angles 09:36:00 SkyScan query 09:36:00 SkyScan query done: ret=0 az=112.995<-7533 ze=131.22<-3252 Statuses=0008 0009 09:36:00 Msec=2250 True Az=112.995 Ze=131.22 Az status=0008 Ze status=0009 09:36:00 Check angles 09:36:00 SkyScan query 09:36:01 SkyScan query done: ret=0 az=112.995<-7533 ze=152.13<-1858 Statuses=0008 0009 09:36:01 Msec=3000 True Az=112.995 Ze=152.13 Az status=0008 Ze status=0009 09:36:01 Check angles 09:36:01 SkyScan query 09:36:02 SkyScan query done: ret=0 az=112.995<-7533 ze=173.1<-460 Statuses=0008 0009 09:36:02 Msec=3750 True Az=112.995 Ze=173.1 Az status=0008 Ze status=0009 09:36:02 Check angles 09:36:02 SkyScan query 09:36:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.92<-23528 Statuses=0008 0009 09:36:03 Msec=4500 True Az=112.995 Ze=-172.92 Az status=0008 Ze status=0009 09:36:03 Check angles 09:36:03 SkyScan query 09:36:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.965<-23531 Statuses=0008 0008 09:36:03 Msec=5250 True Az=112.995 Ze=-172.965 Az status=0008 Ze status=0008 09:36:03 Message to Master queued w/err=0: serial=270212 error=0 09:36:08 Received message from Master: op=Filter serial=270213 09:36:08 Color wheel filter change from 0 to 0 09:36:08 FLIGetFilterPos err=0 currentPosition=0 09:36:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:08 Filter is already there-color wheel unchanged 09:36:08 Received message from Master: op=Shutter serial=270214 09:36:08 Shutter LASER open 09:36:09 Received message from Camera: op=State serial=270216 09:36:09 GetSingleValue result=40 Value=cccccccc 09:36:09 SkyScan query 09:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:36:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:09 Parameters OK 09:36:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:09 Set A/D data flow result=40 09:36:09 Set A/D channel type result=40 09:36:09 Set A/D encoding result=40 09:36:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:09 Set channel filter=0.000000e+000 result=40 09:36:09 Config A/D Result=40 09:36:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:09 Get A/D filter: -9.255963e+061 result=40 09:36:09 Get A/D value=-858993460 result=40 09:36:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:09 Parameters OK 09:36:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:09 Set A/D data flow result=40 09:36:09 Set A/D channel type result=40 09:36:09 Set A/D encoding result=40 09:36:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:09 Set channel filter=0.000000e+000 result=40 09:36:09 Config A/D Result=40 09:36:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:09 Get A/D filter: -9.255963e+061 result=40 09:36:09 Get A/D value=-858993460 result=40 09:36:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:09 Aux= 09:36:09 Message to Camera, serial 270216 queued 09:36:18 Received message from Master: op=Shutter serial=270226 09:36:18 Shutter LASER close 09:36:18 Received message from Master: op=PointingHead serial=270230 09:36:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:36:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:36:18 Point started: ret=0 09:36:18 point_skyscan result=0 09:36:19 Check angles 09:36:19 SkyScan query 09:36:20 SkyScan query done: ret=0 az=90.045<-6003 ze=157.335<-1511 Statuses=0009 0009 09:36:20 Msec=0 True Az=90.045 Ze=157.335 Az status=0009 Ze status=0009 09:36:20 Check angles 09:36:20 SkyScan query 09:36:20 SkyScan query done: ret=0 az=72.555<-4837 ze=136.35<-2910 Statuses=0009 0009 09:36:20 Msec=750 True Az=72.555 Ze=136.35 Az status=0009 Ze status=0009 09:36:21 Check angles 09:36:21 SkyScan query 09:36:21 SkyScan query done: ret=0 az=55.14<-3676 ze=115.455<-4303 Statuses=0009 0009 09:36:21 Msec=1500 True Az=55.14 Ze=115.455 Az status=0009 Ze status=0009 09:36:21 Check angles 09:36:21 SkyScan query 09:36:22 SkyScan query done: ret=0 az=40.98<-2732 ze=94.44<-5704 Statuses=0009 0009 09:36:22 Msec=2250 True Az=40.98 Ze=94.44 Az status=0009 Ze status=0009 09:36:22 Check angles 09:36:22 SkyScan query 09:36:23 SkyScan query done: ret=0 az=40.995<-2733 ze=73.5<-7100 Statuses=0008 0009 09:36:23 Msec=3000 True Az=40.995 Ze=73.5 Az status=0008 Ze status=0009 09:36:23 Check angles 09:36:23 SkyScan query 09:36:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.89<-8474 Statuses=0008 0009 09:36:23 Msec=3750 True Az=40.995 Ze=52.89 Az status=0008 Ze status=0009 09:36:24 Check angles 09:36:24 SkyScan query 09:36:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:36:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:36:24 Message to Master queued w/err=0: serial=270230 error=0 09:36:29 Received message from Master: op=Filter serial=270231 09:36:29 Color wheel filter change from 0 to 0 09:36:29 FLIGetFilterPos err=0 currentPosition=0 09:36:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:29 Filter is already there-color wheel unchanged 09:36:29 Received message from Master: op=Shutter serial=270232 09:36:29 Shutter LASER close 09:36:30 Received message from Camera: op=State serial=270234 09:36:30 GetSingleValue result=40 Value=cccccccc 09:36:30 SkyScan query 09:36:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:36:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:30 Parameters OK 09:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:30 Set A/D data flow result=40 09:36:30 Set A/D channel type result=40 09:36:30 Set A/D encoding result=40 09:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:30 Set channel filter=0.000000e+000 result=40 09:36:30 Config A/D Result=40 09:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:30 Get A/D filter: -9.255963e+061 result=40 09:36:30 Get A/D value=-858993460 result=40 09:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:30 Parameters OK 09:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:30 Set A/D data flow result=40 09:36:30 Set A/D channel type result=40 09:36:30 Set A/D encoding result=40 09:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:30 Set channel filter=0.000000e+000 result=40 09:36:30 Config A/D Result=40 09:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:30 Get A/D filter: -9.255963e+061 result=40 09:36:30 Get A/D value=-858993460 result=40 09:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:30 Aux= 09:36:30 Message to Camera, serial 270234 queued 09:37:07 Received message from Master: op=PointingHead serial=270247 09:37:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:37:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:37:07 Point started: ret=0 09:37:07 point_skyscan result=0 09:37:08 Check angles 09:37:08 SkyScan query 09:37:09 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 09:37:09 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 09:37:09 Check angles 09:37:09 SkyScan query 09:37:09 SkyScan query done: ret=0 az=81.33<-5422 ze=66.495<-7567 Statuses=0009 0008 09:37:09 Msec=750 True Az=81.33 Ze=66.495 Az status=0009 Ze status=0008 09:37:10 Check angles 09:37:10 SkyScan query 09:37:10 SkyScan query done: ret=0 az=98.79<-6586 ze=66.495<-7567 Statuses=0009 0008 09:37:10 Msec=1500 True Az=98.79 Ze=66.495 Az status=0009 Ze status=0008 09:37:10 Check angles 09:37:10 SkyScan query 09:37:11 SkyScan query done: ret=0 az=116.595<-7773 ze=66.495<-7567 Statuses=0009 0008 09:37:11 Msec=2250 True Az=116.595 Ze=66.495 Az status=0009 Ze status=0008 09:37:11 Check angles 09:37:11 SkyScan query 09:37:12 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 09:37:12 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 09:37:12 Check angles 09:37:12 SkyScan query 09:37:12 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 09:37:12 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 09:37:13 Check angles 09:37:13 SkyScan query 09:37:13 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:37:13 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:37:13 Message to Master queued w/err=0: serial=270247 error=0 09:37:18 Received message from Master: op=Filter serial=270248 09:37:18 Color wheel filter change from 0 to 0 09:37:18 FLIGetFilterPos err=0 currentPosition=0 09:37:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:18 Filter is already there-color wheel unchanged 09:37:18 Received message from Master: op=Shutter serial=270249 09:37:18 Shutter LASER close 09:37:18 Received message from Camera: op=State serial=270251 09:37:18 GetSingleValue result=40 Value=cccccccc 09:37:18 SkyScan query 09:37:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:37:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:19 Parameters OK 09:37:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:19 Set A/D data flow result=40 09:37:19 Set A/D channel type result=40 09:37:19 Set A/D encoding result=40 09:37:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:19 Set channel filter=0.000000e+000 result=40 09:37:19 Config A/D Result=40 09:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:19 Get A/D filter: -9.255963e+061 result=40 09:37:19 Get A/D value=-858993460 result=40 09:37:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:19 Parameters OK 09:37:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:19 Set A/D data flow result=40 09:37:19 Set A/D channel type result=40 09:37:19 Set A/D encoding result=40 09:37:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:19 Set channel filter=0.000000e+000 result=40 09:37:19 Config A/D Result=40 09:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:19 Get A/D filter: -9.255963e+061 result=40 09:37:19 Get A/D value=-858993460 result=40 09:37:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:19 Aux= 09:37:19 Message to Camera, serial 270251 queued 09:37:56 Received message from Master: op=PointingHead serial=270264 09:37:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:37:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:37:56 Point started: ret=0 09:37:56 point_skyscan result=0 09:37:57 Check angles 09:37:57 SkyScan query 09:37:58 SkyScan query done: ret=0 az=134.61<-8974 ze=96.495<-5567 Statuses=0009 0009 09:37:58 Msec=0 True Az=134.61 Ze=96.495 Az status=0009 Ze status=0009 09:37:58 Check angles 09:37:58 SkyScan query 09:37:58 SkyScan query done: ret=0 az=130.995<-8733 ze=117.435<-4171 Statuses=0008 0009 09:37:58 Msec=750 True Az=130.995 Ze=117.435 Az status=0008 Ze status=0009 09:37:59 Check angles 09:37:59 SkyScan query 09:37:59 SkyScan query done: ret=0 az=130.995<-8733 ze=138.39<-2774 Statuses=0008 0009 09:37:59 Msec=1500 True Az=130.995 Ze=138.39 Az status=0008 Ze status=0009 09:37:59 Check angles 09:37:59 SkyScan query 09:38:00 SkyScan query done: ret=0 az=130.995<-8733 ze=159.81<-1346 Statuses=0008 0009 09:38:00 Msec=2250 True Az=130.995 Ze=159.81 Az status=0008 Ze status=0009 09:38:00 Check angles 09:38:00 SkyScan query 09:38:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.235<-23949 Statuses=0008 0009 09:38:01 Msec=3000 True Az=130.995 Ze=-179.235 Az status=0008 Ze status=0009 09:38:01 Check angles 09:38:01 SkyScan query 09:38:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.265<-22551 Statuses=0008 0009 09:38:01 Msec=3750 True Az=130.995 Ze=-158.265 Az status=0008 Ze status=0009 09:38:02 Check angles 09:38:02 SkyScan query 09:38:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 09:38:02 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 09:38:02 Check angles 09:38:02 SkyScan query 09:38:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:38:03 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:38:03 Message to Master queued w/err=0: serial=270264 error=0 09:38:08 Received message from Master: op=Filter serial=270265 09:38:08 Color wheel filter change from 0 to 0 09:38:08 FLIGetFilterPos err=0 currentPosition=0 09:38:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:08 Filter is already there-color wheel unchanged 09:38:08 Received message from Master: op=Shutter serial=270266 09:38:08 Shutter LASER close 09:38:08 Received message from Camera: op=State serial=270268 09:38:08 GetSingleValue result=40 Value=cccccccc 09:38:08 SkyScan query 09:38:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:38:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:09 Parameters OK 09:38:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:09 Set A/D data flow result=40 09:38:09 Set A/D channel type result=40 09:38:09 Set A/D encoding result=40 09:38:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:09 Set channel filter=0.000000e+000 result=40 09:38:09 Config A/D Result=40 09:38:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:09 Get A/D filter: -9.255963e+061 result=40 09:38:09 Get A/D value=-858993460 result=40 09:38:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:09 Parameters OK 09:38:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:09 Set A/D data flow result=40 09:38:09 Set A/D channel type result=40 09:38:09 Set A/D encoding result=40 09:38:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:09 Set channel filter=0.000000e+000 result=40 09:38:09 Config A/D Result=40 09:38:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:09 Get A/D filter: -9.255963e+061 result=40 09:38:09 Get A/D value=-858993460 result=40 09:38:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:09 Aux= 09:38:09 Message to Camera, serial 270268 queued 09:38:45 Received message from Master: op=PointingHead serial=270280 09:38:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:38:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:38:45 Point started: ret=0 09:38:45 point_skyscan result=0 09:38:46 Check angles 09:38:46 SkyScan query 09:38:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.88<-23392 Statuses=0009 0009 09:38:46 Msec=0 True Az=113.01 Ze=-170.88 Az status=0009 Ze status=0009 09:38:47 Check angles 09:38:47 SkyScan query 09:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:38:47 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:38:47 Message to Master queued w/err=0: serial=270280 error=0 09:38:52 Received message from Master: op=Filter serial=270281 09:38:52 Color wheel filter change from 0 to 0 09:38:52 FLIGetFilterPos err=0 currentPosition=0 09:38:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:52 Filter is already there-color wheel unchanged 09:38:52 Received message from Master: op=Shutter serial=270282 09:38:52 Shutter LASER open 09:38:52 Received message from Camera: op=State serial=270284 09:38:52 GetSingleValue result=40 Value=cccccccc 09:38:52 SkyScan query 09:38:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:38:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:53 Parameters OK 09:38:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:53 Set A/D data flow result=40 09:38:53 Set A/D channel type result=40 09:38:53 Set A/D encoding result=40 09:38:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:53 Set channel filter=0.000000e+000 result=40 09:38:53 Config A/D Result=40 09:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:53 Get A/D filter: -9.255963e+061 result=40 09:38:53 Get A/D value=-858993460 result=40 09:38:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:53 Parameters OK 09:38:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:53 Set A/D data flow result=40 09:38:53 Set A/D channel type result=40 09:38:53 Set A/D encoding result=40 09:38:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:53 Set channel filter=0.000000e+000 result=40 09:38:53 Config A/D Result=40 09:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:53 Get A/D filter: -9.255963e+061 result=40 09:38:53 Get A/D value=-858993460 result=40 09:38:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:53 Aux= 09:38:53 Message to Camera, serial 270284 queued 09:39:01 Received message from Master: op=Shutter serial=270294 09:39:01 Shutter LASER close 09:39:02 Received message from Master: op=PointingHead serial=270298 09:39:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:39:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:39:02 Point started: ret=0 09:39:02 point_skyscan result=0 09:39:03 Check angles 09:39:03 SkyScan query 09:39:04 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.4<-21560 Statuses=0009 0009 09:39:04 Msec=0 True Az=135.855 Ze=-143.4 Az status=0009 Ze status=0009 09:39:04 Check angles 09:39:04 SkyScan query 09:39:05 SkyScan query done: ret=0 az=153.33<-10222 ze=-122.415<-20161 Statuses=0009 0009 09:39:05 Msec=750 True Az=153.33 Ze=-122.415 Az status=0009 Ze status=0009 09:39:05 Check angles 09:39:05 SkyScan query 09:39:05 SkyScan query done: ret=0 az=170.88<-11392 ze=-101.58<-18772 Statuses=0009 0009 09:39:05 Msec=1500 True Az=170.88 Ze=-101.58 Az status=0009 Ze status=0009 09:39:05 Check angles 09:39:05 SkyScan query 09:39:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.52<-17368 Statuses=0008 0009 09:39:06 Msec=2250 True Az=176.01 Ze=-80.52 Az status=0008 Ze status=0009 09:39:06 Check angles 09:39:06 SkyScan query 09:39:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.595<-15973 Statuses=0008 0009 09:39:07 Msec=3000 True Az=176.01 Ze=-59.595 Az status=0008 Ze status=0009 09:39:07 Check angles 09:39:07 SkyScan query 09:39:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:39:08 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:39:08 Message to Master queued w/err=0: serial=270298 error=0 09:39:13 Received message from Master: op=Filter serial=270299 09:39:13 Color wheel filter change from 0 to 0 09:39:13 FLIGetFilterPos err=0 currentPosition=0 09:39:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:13 Filter is already there-color wheel unchanged 09:39:13 Received message from Master: op=Shutter serial=270300 09:39:13 Shutter LASER close 09:39:13 Received message from Camera: op=State serial=270302 09:39:13 GetSingleValue result=40 Value=cccccccc 09:39:13 SkyScan query 09:39:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:39:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:13 Parameters OK 09:39:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:13 Set A/D data flow result=40 09:39:13 Set A/D channel type result=40 09:39:13 Set A/D encoding result=40 09:39:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:13 Set channel filter=0.000000e+000 result=40 09:39:13 Config A/D Result=40 09:39:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:13 Get A/D filter: -9.255963e+061 result=40 09:39:13 Get A/D value=-858993460 result=40 09:39:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:13 Parameters OK 09:39:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:13 Set A/D data flow result=40 09:39:13 Set A/D channel type result=40 09:39:13 Set A/D encoding result=40 09:39:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:13 Set channel filter=0.000000e+000 result=40 09:39:13 Config A/D Result=40 09:39:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:13 Get A/D filter: -9.255963e+061 result=40 09:39:13 Get A/D value=-858993460 result=40 09:39:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:13 Aux= 09:39:13 Message to Camera, serial 270302 queued 09:39:50 Received message from Master: op=PointingHead serial=270315 09:39:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:39:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:39:51 Point started: ret=0 09:39:51 point_skyscan result=0 09:39:51 Check angles 09:39:51 SkyScan query 09:39:52 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.765<-13451 Statuses=0009 0009 09:39:52 Msec=0 True Az=152.955 Ze=-21.765 Az status=0009 Ze status=0009 09:39:52 Check angles 09:39:52 SkyScan query 09:39:53 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.375<-12025 Statuses=0009 0009 09:39:53 Msec=750 True Az=135.135 Ze=-0.375 Az status=0009 Ze status=0009 09:39:53 Check angles 09:39:53 SkyScan query 09:39:53 SkyScan query done: ret=0 az=117.66<-7844 ze=20.58<-10628 Statuses=0009 0009 09:39:53 Msec=1500 True Az=117.66 Ze=20.58 Az status=0009 Ze status=0009 09:39:54 Check angles 09:39:54 SkyScan query 09:39:54 SkyScan query done: ret=0 az=100.32<-6688 ze=41.52<-9232 Statuses=0009 0009 09:39:54 Msec=2250 True Az=100.32 Ze=41.52 Az status=0009 Ze status=0009 09:39:54 Check angles 09:39:54 SkyScan query 09:39:55 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:39:55 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:39:55 Check angles 09:39:55 SkyScan query 09:39:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:39:56 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 09:39:56 Message to Master queued w/err=0: serial=270315 error=0 09:40:01 Received message from Master: op=Filter serial=270316 09:40:01 Color wheel filter change from 0 to 0 09:40:01 FLIGetFilterPos err=0 currentPosition=0 09:40:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:01 Filter is already there-color wheel unchanged 09:40:01 Received message from Master: op=Shutter serial=270317 09:40:01 Shutter LASER close 09:40:01 Received message from Camera: op=State serial=270319 09:40:01 GetSingleValue result=40 Value=cccccccc 09:40:01 SkyScan query 09:40:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:40:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:01 Parameters OK 09:40:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:01 Set A/D data flow result=40 09:40:01 Set A/D channel type result=40 09:40:01 Set A/D encoding result=40 09:40:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:01 Set channel filter=0.000000e+000 result=40 09:40:01 Config A/D Result=40 09:40:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:01 Get A/D filter: -9.255963e+061 result=40 09:40:01 Get A/D value=-858993460 result=40 09:40:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:01 Parameters OK 09:40:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:01 Set A/D data flow result=40 09:40:01 Set A/D channel type result=40 09:40:01 Set A/D encoding result=40 09:40:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:01 Set channel filter=0.000000e+000 result=40 09:40:01 Config A/D Result=40 09:40:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:01 Get A/D filter: -9.255963e+061 result=40 09:40:01 Get A/D value=-858993460 result=40 09:40:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:01 Aux= 09:40:01 Message to Camera, serial 270319 queued 09:40:38 Received message from Master: op=PointingHead serial=270332 09:40:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:40:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:40:39 Point started: ret=0 09:40:39 point_skyscan result=0 09:40:39 Check angles 09:40:39 SkyScan query 09:40:40 SkyScan query done: ret=0 az=108.96<-7264 ze=38.475<-9435 Statuses=0009 0008 09:40:40 Msec=0 True Az=108.96 Ze=38.475 Az status=0009 Ze status=0008 09:40:40 Check angles 09:40:40 SkyScan query 09:40:41 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 09:40:41 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 09:40:41 Check angles 09:40:41 SkyScan query 09:40:41 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 09:40:41 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 09:40:42 Check angles 09:40:42 SkyScan query 09:40:42 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 09:40:42 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 09:40:42 Check angles 09:40:42 SkyScan query 09:40:43 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:40:43 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:40:43 Check angles 09:40:43 SkyScan query 09:40:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:40:44 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 09:40:44 Message to Master queued w/err=0: serial=270332 error=0 09:40:49 Received message from Master: op=Filter serial=270333 09:40:49 Color wheel filter change from 0 to 0 09:40:49 FLIGetFilterPos err=0 currentPosition=0 09:40:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:49 Filter is already there-color wheel unchanged 09:40:49 Received message from Master: op=Shutter serial=270334 09:40:49 Shutter LASER close 09:40:49 Received message from Camera: op=State serial=270336 09:40:49 GetSingleValue result=40 Value=cccccccc 09:40:49 SkyScan query 09:40:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:40:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:50 Parameters OK 09:40:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:50 Set A/D data flow result=40 09:40:50 Set A/D channel type result=40 09:40:50 Set A/D encoding result=40 09:40:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:50 Set channel filter=0.000000e+000 result=40 09:40:50 Config A/D Result=40 09:40:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:50 Get A/D filter: -9.255963e+061 result=40 09:40:50 Get A/D value=-858993460 result=40 09:40:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:50 Parameters OK 09:40:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:50 Set A/D data flow result=40 09:40:50 Set A/D channel type result=40 09:40:50 Set A/D encoding result=40 09:40:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:50 Set channel filter=0.000000e+000 result=40 09:40:50 Config A/D Result=40 09:40:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:50 Get A/D filter: -9.255963e+061 result=40 09:40:50 Get A/D value=-858993460 result=40 09:40:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:50 Aux= 09:40:50 Message to Camera, serial 270336 queued 09:41:26 Received message from Master: op=PointingHead serial=270349 09:41:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:41:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:41:27 Point started: ret=0 09:41:27 point_skyscan result=0 09:41:28 Check angles 09:41:28 SkyScan query 09:41:28 SkyScan query done: ret=0 az=152.655<-10177 ze=68.76<-7416 Statuses=0009 0009 09:41:28 Msec=0 True Az=152.655 Ze=68.76 Az status=0009 Ze status=0009 09:41:28 Check angles 09:41:28 SkyScan query 09:41:29 SkyScan query done: ret=0 az=134.61<-8974 ze=90.165<-5989 Statuses=0009 0009 09:41:29 Msec=750 True Az=134.61 Ze=90.165 Az status=0009 Ze status=0009 09:41:29 Check angles 09:41:29 SkyScan query 09:41:30 SkyScan query done: ret=0 az=117.315<-7821 ze=111.12<-4592 Statuses=0009 0009 09:41:30 Msec=1500 True Az=117.315 Ze=111.12 Az status=0009 Ze status=0009 09:41:30 Check angles 09:41:30 SkyScan query 09:41:30 SkyScan query done: ret=0 az=112.995<-7533 ze=132.09<-3194 Statuses=0008 0009 09:41:30 Msec=2250 True Az=112.995 Ze=132.09 Az status=0008 Ze status=0009 09:41:31 Check angles 09:41:31 SkyScan query 09:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=153.48<-1768 Statuses=0008 0009 09:41:31 Msec=3000 True Az=112.995 Ze=153.48 Az status=0008 Ze status=0009 09:41:31 Check angles 09:41:31 SkyScan query 09:41:32 SkyScan query done: ret=0 az=112.995<-7533 ze=174.42<-372 Statuses=0008 0009 09:41:32 Msec=3750 True Az=112.995 Ze=174.42 Az status=0008 Ze status=0009 09:41:32 Check angles 09:41:32 SkyScan query 09:41:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 09:41:33 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 09:41:33 Message to Master queued w/err=0: serial=270349 error=0 09:41:38 Received message from Master: op=Filter serial=270350 09:41:38 Color wheel filter change from 0 to 0 09:41:38 FLIGetFilterPos err=0 currentPosition=0 09:41:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:38 Filter is already there-color wheel unchanged 09:41:38 Received message from Master: op=Shutter serial=270351 09:41:38 Shutter LASER open 09:41:38 Received message from Camera: op=State serial=270353 09:41:38 GetSingleValue result=40 Value=cccccccc 09:41:38 SkyScan query 09:41:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:41:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:39 Parameters OK 09:41:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:39 Set A/D data flow result=40 09:41:39 Set A/D channel type result=40 09:41:39 Set A/D encoding result=40 09:41:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:39 Set channel filter=0.000000e+000 result=40 09:41:39 Config A/D Result=40 09:41:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:39 Get A/D filter: -9.255963e+061 result=40 09:41:39 Get A/D value=-858993460 result=40 09:41:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:39 Parameters OK 09:41:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:39 Set A/D data flow result=40 09:41:39 Set A/D channel type result=40 09:41:39 Set A/D encoding result=40 09:41:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:39 Set channel filter=0.000000e+000 result=40 09:41:39 Config A/D Result=40 09:41:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:39 Get A/D filter: -9.255963e+061 result=40 09:41:39 Get A/D value=-858993460 result=40 09:41:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:39 Aux= 09:41:39 Message to Camera, serial 270353 queued 09:41:47 Received message from Master: op=Shutter serial=270363 09:41:47 Shutter LASER close 09:41:47 Received message from Master: op=PointingHead serial=270367 09:41:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:41:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:41:48 Point started: ret=0 09:41:48 point_skyscan result=0 09:41:49 Check angles 09:41:49 SkyScan query 09:41:49 SkyScan query done: ret=0 az=89.835<-5989 ze=157.065<-1529 Statuses=0009 0009 09:41:49 Msec=0 True Az=89.835 Ze=157.065 Az status=0009 Ze status=0009 09:41:49 Check angles 09:41:49 SkyScan query 09:41:50 SkyScan query done: ret=0 az=72.33<-4822 ze=136.095<-2927 Statuses=0009 0009 09:41:50 Msec=750 True Az=72.33 Ze=136.095 Az status=0009 Ze status=0009 09:41:50 Check angles 09:41:50 SkyScan query 09:41:51 SkyScan query done: ret=0 az=54.84<-3656 ze=115.185<-4321 Statuses=0009 0009 09:41:51 Msec=1500 True Az=54.84 Ze=115.185 Az status=0009 Ze status=0009 09:41:51 Check angles 09:41:51 SkyScan query 09:41:51 SkyScan query done: ret=0 az=40.98<-2732 ze=94.14<-5724 Statuses=0009 0009 09:41:51 Msec=2250 True Az=40.98 Ze=94.14 Az status=0009 Ze status=0009 09:41:52 Check angles 09:41:52 SkyScan query 09:41:52 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 09:41:52 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 09:41:52 Check angles 09:41:52 SkyScan query 09:41:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 09:41:53 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 09:41:53 Check angles 09:41:53 SkyScan query 09:41:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:41:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:41:54 Message to Master queued w/err=0: serial=270367 error=0 09:41:59 Received message from Master: op=Filter serial=270368 09:41:59 Color wheel filter change from 0 to 0 09:41:59 FLIGetFilterPos err=0 currentPosition=0 09:41:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:59 Filter is already there-color wheel unchanged 09:41:59 Received message from Master: op=Shutter serial=270369 09:41:59 Shutter LASER close 09:41:59 Received message from Camera: op=State serial=270371 09:41:59 GetSingleValue result=40 Value=cccccccc 09:41:59 SkyScan query 09:42:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:42:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:00 Parameters OK 09:42:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:00 Set A/D data flow result=40 09:42:00 Set A/D channel type result=40 09:42:00 Set A/D encoding result=40 09:42:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:00 Set channel filter=0.000000e+000 result=40 09:42:00 Config A/D Result=40 09:42:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:00 Get A/D filter: -9.255963e+061 result=40 09:42:00 Get A/D value=-858993460 result=40 09:42:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:00 Parameters OK 09:42:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:00 Set A/D data flow result=40 09:42:00 Set A/D channel type result=40 09:42:00 Set A/D encoding result=40 09:42:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:00 Set channel filter=0.000000e+000 result=40 09:42:00 Config A/D Result=40 09:42:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:00 Get A/D filter: -9.255963e+061 result=40 09:42:00 Get A/D value=-858993460 result=40 09:42:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:00 Aux= 09:42:00 Message to Camera, serial 270371 queued 09:42:37 Received message from Master: op=PointingHead serial=270384 09:42:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:42:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:42:37 Point started: ret=0 09:42:37 point_skyscan result=0 09:42:38 Check angles 09:42:38 SkyScan query 09:42:38 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 09:42:38 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 09:42:38 Check angles 09:42:38 SkyScan query 09:42:39 SkyScan query done: ret=0 az=81.72<-5448 ze=66.51<-7566 Statuses=0009 0008 09:42:39 Msec=750 True Az=81.72 Ze=66.51 Az status=0009 Ze status=0008 09:42:39 Check angles 09:42:39 SkyScan query 09:42:40 SkyScan query done: ret=0 az=99.36<-6624 ze=66.495<-7567 Statuses=0009 0008 09:42:40 Msec=1500 True Az=99.36 Ze=66.495 Az status=0009 Ze status=0008 09:42:40 Check angles 09:42:40 SkyScan query 09:42:40 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 09:42:40 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 09:42:41 Check angles 09:42:41 SkyScan query 09:42:41 SkyScan query done: ret=0 az=134.535<-8969 ze=66.495<-7567 Statuses=0009 0008 09:42:41 Msec=3000 True Az=134.535 Ze=66.495 Az status=0009 Ze status=0008 09:42:41 Check angles 09:42:41 SkyScan query 09:42:42 SkyScan query done: ret=0 az=151.875<-10125 ze=66.495<-7567 Statuses=0009 0008 09:42:42 Msec=3750 True Az=151.875 Ze=66.495 Az status=0009 Ze status=0008 09:42:42 Check angles 09:42:42 SkyScan query 09:42:43 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:42:43 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:42:43 Message to Master queued w/err=0: serial=270384 error=0 09:42:48 Received message from Master: op=Filter serial=270385 09:42:48 Color wheel filter change from 0 to 0 09:42:48 FLIGetFilterPos err=0 currentPosition=0 09:42:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:48 Filter is already there-color wheel unchanged 09:42:48 Received message from Master: op=Shutter serial=270386 09:42:48 Shutter LASER close 09:42:48 Received message from Camera: op=State serial=270388 09:42:48 GetSingleValue result=40 Value=cccccccc 09:42:48 SkyScan query 09:42:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:42:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:49 Parameters OK 09:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:49 Set A/D data flow result=40 09:42:49 Set A/D channel type result=40 09:42:49 Set A/D encoding result=40 09:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:49 Set channel filter=0.000000e+000 result=40 09:42:49 Config A/D Result=40 09:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:49 Get A/D filter: -9.255963e+061 result=40 09:42:49 Get A/D value=-858993460 result=40 09:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:49 Parameters OK 09:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:49 Set A/D data flow result=40 09:42:49 Set A/D channel type result=40 09:42:49 Set A/D encoding result=40 09:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:49 Set channel filter=0.000000e+000 result=40 09:42:49 Config A/D Result=40 09:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:49 Get A/D filter: -9.255963e+061 result=40 09:42:49 Get A/D value=-858993460 result=40 09:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:49 Aux= 09:42:49 Message to Camera, serial 270388 queued 09:43:26 Received message from Master: op=PointingHead serial=270401 09:43:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:43:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:43:26 Point started: ret=0 09:43:26 point_skyscan result=0 09:43:27 Check angles 09:43:27 SkyScan query 09:43:27 SkyScan query done: ret=0 az=135.12<-9008 ze=96.15<-5590 Statuses=0009 0009 09:43:27 Msec=0 True Az=135.12 Ze=96.15 Az status=0009 Ze status=0009 09:43:27 Check angles 09:43:27 SkyScan query 09:43:28 SkyScan query done: ret=0 az=130.995<-8733 ze=117.075<-4195 Statuses=0008 0009 09:43:28 Msec=750 True Az=130.995 Ze=117.075 Az status=0008 Ze status=0009 09:43:28 Check angles 09:43:28 SkyScan query 09:43:29 SkyScan query done: ret=0 az=130.995<-8733 ze=138.03<-2798 Statuses=0008 0009 09:43:29 Msec=1500 True Az=130.995 Ze=138.03 Az status=0008 Ze status=0009 09:43:29 Check angles 09:43:29 SkyScan query 09:43:29 SkyScan query done: ret=0 az=130.995<-8733 ze=158.97<-1402 Statuses=0008 0009 09:43:29 Msec=2250 True Az=130.995 Ze=158.97 Az status=0008 Ze status=0009 09:43:30 Check angles 09:43:30 SkyScan query 09:43:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.655<-23977 Statuses=0008 0009 09:43:30 Msec=3000 True Az=130.995 Ze=-179.655 Az status=0008 Ze status=0009 09:43:30 Check angles 09:43:30 SkyScan query 09:43:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.22<-22548 Statuses=0008 0009 09:43:31 Msec=3750 True Az=130.995 Ze=-158.22 Az status=0008 Ze status=0009 09:43:31 Check angles 09:43:31 SkyScan query 09:43:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 09:43:32 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 09:43:32 Check angles 09:43:32 SkyScan query 09:43:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:43:32 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:43:32 Message to Master queued w/err=0: serial=270401 error=0 09:43:37 Received message from Master: op=Filter serial=270402 09:43:37 Color wheel filter change from 0 to 0 09:43:37 FLIGetFilterPos err=0 currentPosition=0 09:43:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:37 Filter is already there-color wheel unchanged 09:43:38 Received message from Master: op=Shutter serial=270403 09:43:38 Shutter LASER close 09:43:38 Received message from Camera: op=State serial=270405 09:43:38 GetSingleValue result=40 Value=cccccccc 09:43:38 SkyScan query 09:43:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:43:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:38 Parameters OK 09:43:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:38 Set A/D data flow result=40 09:43:38 Set A/D channel type result=40 09:43:38 Set A/D encoding result=40 09:43:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:38 Set channel filter=0.000000e+000 result=40 09:43:38 Config A/D Result=40 09:43:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:38 Get A/D filter: -9.255963e+061 result=40 09:43:38 Get A/D value=-858993460 result=40 09:43:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:38 Parameters OK 09:43:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:38 Set A/D data flow result=40 09:43:38 Set A/D channel type result=40 09:43:38 Set A/D encoding result=40 09:43:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:38 Set channel filter=0.000000e+000 result=40 09:43:38 Config A/D Result=40 09:43:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:38 Get A/D filter: -9.255963e+061 result=40 09:43:38 Get A/D value=-858993460 result=40 09:43:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:38 Aux= 09:43:38 Message to Camera, serial 270405 queued 09:44:15 Received message from Master: op=PointingHead serial=270418 09:44:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:44:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:44:15 Point started: ret=0 09:44:15 point_skyscan result=0 09:44:16 Check angles 09:44:16 SkyScan query 09:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0009 0009 09:44:17 Msec=0 True Az=112.995 Ze=-171.45 Az status=0009 Ze status=0009 09:44:17 Check angles 09:44:17 SkyScan query 09:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:44:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:44:18 Message to Master queued w/err=0: serial=270418 error=0 09:44:23 Received message from Master: op=Filter serial=270419 09:44:23 Color wheel filter change from 0 to 0 09:44:23 FLIGetFilterPos err=0 currentPosition=0 09:44:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:23 Filter is already there-color wheel unchanged 09:44:23 Received message from Master: op=Shutter serial=270420 09:44:23 Shutter LASER open 09:44:23 Received message from Camera: op=State serial=270422 09:44:23 GetSingleValue result=40 Value=cccccccc 09:44:23 SkyScan query 09:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:44:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:23 Parameters OK 09:44:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:23 Set A/D data flow result=40 09:44:23 Set A/D channel type result=40 09:44:23 Set A/D encoding result=40 09:44:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:23 Set channel filter=0.000000e+000 result=40 09:44:23 Config A/D Result=40 09:44:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:23 Get A/D filter: -9.255963e+061 result=40 09:44:23 Get A/D value=-858993460 result=40 09:44:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:23 Parameters OK 09:44:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:23 Set A/D data flow result=40 09:44:23 Set A/D channel type result=40 09:44:23 Set A/D encoding result=40 09:44:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:23 Set channel filter=0.000000e+000 result=40 09:44:23 Config A/D Result=40 09:44:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:23 Get A/D filter: -9.255963e+061 result=40 09:44:23 Get A/D value=-858993460 result=40 09:44:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:23 Aux= 09:44:23 Message to Camera, serial 270422 queued 09:44:32 Received message from Master: op=Shutter serial=270432 09:44:32 Shutter LASER close 09:44:32 Received message from Master: op=PointingHead serial=270436 09:44:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:44:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:44:33 Point started: ret=0 09:44:33 point_skyscan result=0 09:44:34 Check angles 09:44:34 SkyScan query 09:44:34 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.755<-21517 Statuses=0009 0009 09:44:34 Msec=0 True Az=136.38 Ze=-142.755 Az status=0009 Ze status=0009 09:44:34 Check angles 09:44:34 SkyScan query 09:44:35 SkyScan query done: ret=0 az=154.215<-10281 ze=-121.395<-20093 Statuses=0009 0009 09:44:35 Msec=750 True Az=154.215 Ze=-121.395 Az status=0009 Ze status=0009 09:44:35 Check angles 09:44:35 SkyScan query 09:44:36 SkyScan query done: ret=0 az=171.69<-11446 ze=-100.35<-18690 Statuses=0009 0009 09:44:36 Msec=1500 True Az=171.69 Ze=-100.35 Az status=0009 Ze status=0009 09:44:36 Check angles 09:44:36 SkyScan query 09:44:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 09:44:36 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 09:44:37 Check angles 09:44:37 SkyScan query 09:44:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.08<-15872 Statuses=0008 0009 09:44:37 Msec=3000 True Az=176.01 Ze=-58.08 Az status=0008 Ze status=0009 09:44:37 Check angles 09:44:37 SkyScan query 09:44:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:44:38 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:44:38 Message to Master queued w/err=0: serial=270436 error=0 09:44:43 Received message from Master: op=Filter serial=270437 09:44:43 Color wheel filter change from 0 to 0 09:44:43 FLIGetFilterPos err=0 currentPosition=0 09:44:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:43 Filter is already there-color wheel unchanged 09:44:43 Received message from Master: op=Shutter serial=270438 09:44:43 Shutter LASER close 09:44:43 Received message from Camera: op=State serial=270440 09:44:43 GetSingleValue result=40 Value=cccccccc 09:44:43 SkyScan query 09:44:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:44:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:44 Parameters OK 09:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:44 Set A/D data flow result=40 09:44:44 Set A/D channel type result=40 09:44:44 Set A/D encoding result=40 09:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:44 Set channel filter=0.000000e+000 result=40 09:44:44 Config A/D Result=40 09:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:44 Get A/D filter: -9.255963e+061 result=40 09:44:44 Get A/D value=-858993460 result=40 09:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:44 Parameters OK [UTC 2018-12-19 09:44:44] 09:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:44 Set A/D data flow result=40 09:44:44 Set A/D channel type result=40 09:44:44 Set A/D encoding result=40 09:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:44 Set channel filter=0.000000e+000 result=40 09:44:44 Config A/D Result=40 09:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:44 Get A/D filter: -9.255963e+061 result=40 09:44:44 Get A/D value=-858993460 result=40 09:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:44 Aux= 09:44:44 Message to Camera, serial 270440 queued 09:45:21 Received message from Master: op=PointingHead serial=270453 09:45:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:45:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:45:21 Point started: ret=0 09:45:21 point_skyscan result=0 09:45:22 Check angles 09:45:22 SkyScan query 09:45:22 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.975<-13465 Statuses=0009 0009 09:45:22 Msec=0 True Az=153.18 Ze=-21.975 Az status=0009 Ze status=0009 09:45:23 Check angles 09:45:23 SkyScan query 09:45:23 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.975<-12065 Statuses=0009 0009 09:45:23 Msec=750 True Az=135.735 Ze=-0.975 Az status=0009 Ze status=0009 09:45:23 Check angles 09:45:23 SkyScan query 09:45:24 SkyScan query done: ret=0 az=118.23<-7882 ze=19.95<-10670 Statuses=0009 0009 09:45:24 Msec=1500 True Az=118.23 Ze=19.95 Az status=0009 Ze status=0009 09:45:24 Check angles 09:45:24 SkyScan query 09:45:25 SkyScan query done: ret=0 az=100.815<-6721 ze=40.95<-9270 Statuses=0009 0009 09:45:25 Msec=2250 True Az=100.815 Ze=40.95 Az status=0009 Ze status=0009 09:45:25 Check angles 09:45:25 SkyScan query 09:45:25 SkyScan query done: ret=0 az=85.965<-5731 ze=51.555<-8563 Statuses=0009 0008 09:45:25 Msec=3000 True Az=85.965 Ze=51.555 Az status=0009 Ze status=0008 09:45:26 Check angles 09:45:26 SkyScan query 09:45:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:45:26 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 09:45:26 Message to Master queued w/err=0: serial=270453 error=0 09:45:27 Received message from Master: op=Identify serial=270454 09:45:31 Received message from Master: op=Filter serial=270457 09:45:31 Color wheel filter change from 0 to 0 09:45:31 FLIGetFilterPos err=0 currentPosition=0 09:45:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:31 Filter is already there-color wheel unchanged 09:45:31 Received message from Master: op=Shutter serial=270458 09:45:31 Shutter LASER close 09:45:31 Received message from Camera: op=State serial=270460 09:45:31 GetSingleValue result=40 Value=cccccccc 09:45:31 SkyScan query 09:45:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:45:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:32 Parameters OK 09:45:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:32 Set A/D data flow result=40 09:45:32 Set A/D channel type result=40 09:45:32 Set A/D encoding result=40 09:45:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:32 Set channel filter=0.000000e+000 result=40 09:45:32 Config A/D Result=40 09:45:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:32 Get A/D filter: -9.255963e+061 result=40 09:45:32 Get A/D value=-858993460 result=40 09:45:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:32 Parameters OK 09:45:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:32 Set A/D data flow result=40 09:45:32 Set A/D channel type result=40 09:45:32 Set A/D encoding result=40 09:45:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:32 Set channel filter=0.000000e+000 result=40 09:45:32 Config A/D Result=40 09:45:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:32 Get A/D filter: -9.255963e+061 result=40 09:45:32 Get A/D value=-858993460 result=40 09:45:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:32 Aux= 09:45:32 Message to Camera, serial 270460 queued 09:46:08 Received message from Master: op=PointingHead serial=270472 09:46:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:46:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:46:08 Point started: ret=0 09:46:08 point_skyscan result=0 09:46:09 Check angles 09:46:09 SkyScan query 09:46:09 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 09:46:09 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 09:46:10 Check angles 09:46:10 SkyScan query 09:46:10 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 09:46:10 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 09:46:10 Check angles 09:46:10 SkyScan query 09:46:11 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 09:46:11 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 09:46:11 Check angles 09:46:11 SkyScan query 09:46:12 SkyScan query done: ret=0 az=161.625<-10775 ze=38.505<-9433 Statuses=0009 0008 09:46:12 Msec=2250 True Az=161.625 Ze=38.505 Az status=0009 Ze status=0008 09:46:12 Check angles 09:46:12 SkyScan query 09:46:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:46:13 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:46:13 Check angles 09:46:13 SkyScan query 09:46:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:46:13 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 09:46:13 Message to Master queued w/err=0: serial=270472 error=0 09:46:18 Received message from Master: op=Filter serial=270473 09:46:18 Color wheel filter change from 0 to 0 09:46:18 FLIGetFilterPos err=0 currentPosition=0 09:46:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:18 Filter is already there-color wheel unchanged 09:46:18 Received message from Master: op=Shutter serial=270474 09:46:18 Shutter LASER close 09:46:18 Received message from Camera: op=State serial=270476 09:46:18 GetSingleValue result=40 Value=cccccccc 09:46:18 SkyScan query 09:46:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:46:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:19 Parameters OK 09:46:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:19 Set A/D data flow result=40 09:46:19 Set A/D channel type result=40 09:46:19 Set A/D encoding result=40 09:46:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:19 Set channel filter=0.000000e+000 result=40 09:46:19 Config A/D Result=40 09:46:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:19 Get A/D filter: -9.255963e+061 result=40 09:46:19 Get A/D value=-858993460 result=40 09:46:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:19 Parameters OK 09:46:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:19 Set A/D data flow result=40 09:46:19 Set A/D channel type result=40 09:46:19 Set A/D encoding result=40 09:46:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:19 Set channel filter=0.000000e+000 result=40 09:46:19 Config A/D Result=40 09:46:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:19 Get A/D filter: -9.255963e+061 result=40 09:46:19 Get A/D value=-858993460 result=40 09:46:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:19 Aux= 09:46:19 Message to Camera, serial 270476 queued 09:46:56 Received message from Master: op=PointingHead serial=270489 09:46:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:46:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:46:56 Point started: ret=0 09:46:56 point_skyscan result=0 09:46:57 Check angles 09:46:57 SkyScan query 09:46:58 SkyScan query done: ret=0 az=152.955<-10197 ze=68.265<-7449 Statuses=0009 0009 09:46:58 Msec=0 True Az=152.955 Ze=68.265 Az status=0009 Ze status=0009 09:46:58 Check angles 09:46:58 SkyScan query 09:46:59 SkyScan query done: ret=0 az=135.555<-9037 ze=89.295<-6047 Statuses=0009 0009 09:46:59 Msec=750 True Az=135.555 Ze=89.295 Az status=0009 Ze status=0009 09:46:59 Check angles 09:46:59 SkyScan query 09:46:59 SkyScan query done: ret=0 az=117.675<-7845 ze=110.55<-4630 Statuses=0009 0009 09:46:59 Msec=1500 True Az=117.675 Ze=110.55 Az status=0009 Ze status=0009 09:46:59 Check angles 09:46:59 SkyScan query 09:47:00 SkyScan query done: ret=0 az=112.98<-7532 ze=131.565<-3229 Statuses=0008 0009 09:47:00 Msec=2250 True Az=112.98 Ze=131.565 Az status=0008 Ze status=0009 09:47:00 Check angles 09:47:00 SkyScan query 09:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=152.475<-1835 Statuses=0008 0009 09:47:01 Msec=3000 True Az=112.995 Ze=152.475 Az status=0008 Ze status=0009 09:47:01 Check angles 09:47:01 SkyScan query 09:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=173.895<-407 Statuses=0008 0009 09:47:02 Msec=3750 True Az=112.995 Ze=173.895 Az status=0008 Ze status=0009 09:47:02 Check angles 09:47:02 SkyScan query 09:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 09:47:02 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 09:47:02 Message to Master queued w/err=0: serial=270489 error=0 09:47:07 Received message from Master: op=Filter serial=270490 09:47:07 Color wheel filter change from 0 to 0 09:47:07 FLIGetFilterPos err=0 currentPosition=0 09:47:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:07 Filter is already there-color wheel unchanged 09:47:08 Received message from Master: op=Shutter serial=270491 09:47:08 Shutter LASER open 09:47:08 Received message from Camera: op=State serial=270493 09:47:08 GetSingleValue result=40 Value=cccccccc 09:47:08 SkyScan query 09:47:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:47:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:08 Parameters OK 09:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:08 Set A/D data flow result=40 09:47:08 Set A/D channel type result=40 09:47:08 Set A/D encoding result=40 09:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:08 Set channel filter=0.000000e+000 result=40 09:47:08 Config A/D Result=40 09:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:08 Get A/D filter: -9.255963e+061 result=40 09:47:08 Get A/D value=-858993460 result=40 09:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:08 Parameters OK 09:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:08 Set A/D data flow result=40 09:47:08 Set A/D channel type result=40 09:47:08 Set A/D encoding result=40 09:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:08 Set channel filter=0.000000e+000 result=40 09:47:08 Config A/D Result=40 09:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:08 Get A/D filter: -9.255963e+061 result=40 09:47:08 Get A/D value=-858993460 result=40 09:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:08 Aux= 09:47:08 Message to Camera, serial 270493 queued 09:47:17 Received message from Master: op=Shutter serial=270503 09:47:17 Shutter LASER close 09:47:17 Received message from Master: op=PointingHead serial=270507 09:47:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:47:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:47:17 Point started: ret=0 09:47:17 point_skyscan result=0 09:47:18 Check angles 09:47:18 SkyScan query 09:47:19 SkyScan query done: ret=0 az=89.895<-5993 ze=157.11<-1526 Statuses=0009 0009 09:47:19 Msec=0 True Az=89.895 Ze=157.11 Az status=0009 Ze status=0009 09:47:19 Check angles 09:47:19 SkyScan query 09:47:20 SkyScan query done: ret=0 az=72.33<-4822 ze=136.185<-2921 Statuses=0009 0009 09:47:20 Msec=750 True Az=72.33 Ze=136.185 Az status=0009 Ze status=0009 09:47:20 Check angles 09:47:20 SkyScan query 09:47:20 SkyScan query done: ret=0 az=54.795<-3653 ze=115.26<-4316 Statuses=0009 0009 09:47:20 Msec=1500 True Az=54.795 Ze=115.26 Az status=0009 Ze status=0009 09:47:20 Check angles 09:47:20 SkyScan query 09:47:21 SkyScan query done: ret=0 az=40.98<-2732 ze=94.23<-5718 Statuses=0009 0009 09:47:21 Msec=2250 True Az=40.98 Ze=94.23 Az status=0009 Ze status=0009 09:47:21 Check angles 09:47:21 SkyScan query 09:47:22 SkyScan query done: ret=0 az=40.995<-2733 ze=72.84<-7144 Statuses=0008 0009 09:47:22 Msec=3000 True Az=40.995 Ze=72.84 Az status=0008 Ze status=0009 09:47:22 Check angles 09:47:22 SkyScan query 09:47:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 09:47:23 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 09:47:23 Check angles 09:47:23 SkyScan query 09:47:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:47:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:47:23 Message to Master queued w/err=0: serial=270507 error=0 09:47:28 Received message from Master: op=Filter serial=270508 09:47:28 Color wheel filter change from 0 to 0 09:47:28 FLIGetFilterPos err=0 currentPosition=0 09:47:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:28 Filter is already there-color wheel unchanged 09:47:28 Received message from Master: op=Shutter serial=270509 09:47:28 Shutter LASER close 09:47:29 Received message from Camera: op=State serial=270511 09:47:29 GetSingleValue result=40 Value=cccccccc 09:47:29 SkyScan query 09:47:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:47:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:29 Parameters OK 09:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:29 Set A/D data flow result=40 09:47:29 Set A/D channel type result=40 09:47:29 Set A/D encoding result=40 09:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:29 Set channel filter=0.000000e+000 result=40 09:47:29 Config A/D Result=40 09:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:29 Get A/D filter: -9.255963e+061 result=40 09:47:29 Get A/D value=-858993460 result=40 09:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:29 Parameters OK 09:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:29 Set A/D data flow result=40 09:47:29 Set A/D channel type result=40 09:47:29 Set A/D encoding result=40 09:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:29 Set channel filter=0.000000e+000 result=40 09:47:29 Config A/D Result=40 09:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:29 Get A/D filter: -9.255963e+061 result=40 09:47:29 Get A/D value=-858993460 result=40 09:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:29 Aux= 09:47:29 Message to Camera, serial 270511 queued 09:48:06 Received message from Master: op=PointingHead serial=270524 09:48:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:48:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:48:06 Point started: ret=0 09:48:06 point_skyscan result=0 09:48:07 Check angles 09:48:07 SkyScan query 09:48:08 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 09:48:08 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 09:48:08 Check angles 09:48:08 SkyScan query 09:48:08 SkyScan query done: ret=0 az=81.435<-5429 ze=66.51<-7566 Statuses=0009 0008 09:48:08 Msec=750 True Az=81.435 Ze=66.51 Az status=0009 Ze status=0008 09:48:09 Check angles 09:48:09 SkyScan query 09:48:09 SkyScan query done: ret=0 az=98.865<-6591 ze=66.495<-7567 Statuses=0009 0008 09:48:09 Msec=1500 True Az=98.865 Ze=66.495 Az status=0009 Ze status=0008 09:48:09 Check angles 09:48:09 SkyScan query 09:48:10 SkyScan query done: ret=0 az=116.385<-7759 ze=66.495<-7567 Statuses=0009 0008 09:48:10 Msec=2250 True Az=116.385 Ze=66.495 Az status=0009 Ze status=0008 09:48:10 Check angles 09:48:10 SkyScan query 09:48:11 SkyScan query done: ret=0 az=133.785<-8919 ze=66.495<-7567 Statuses=0009 0008 09:48:11 Msec=3000 True Az=133.785 Ze=66.495 Az status=0009 Ze status=0008 09:48:11 Check angles 09:48:11 SkyScan query 09:48:11 SkyScan query done: ret=0 az=151.275<-10085 ze=66.495<-7567 Statuses=0009 0008 09:48:11 Msec=3750 True Az=151.275 Ze=66.495 Az status=0009 Ze status=0008 09:48:12 Check angles 09:48:12 SkyScan query 09:48:12 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:48:12 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:48:12 Message to Master queued w/err=0: serial=270524 error=0 09:48:17 Received message from Master: op=Filter serial=270525 09:48:17 Color wheel filter change from 0 to 0 09:48:17 FLIGetFilterPos err=0 currentPosition=0 09:48:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:17 Filter is already there-color wheel unchanged 09:48:17 Received message from Master: op=Shutter serial=270526 09:48:17 Shutter LASER close 09:48:17 Received message from Camera: op=State serial=270528 09:48:17 GetSingleValue result=40 Value=cccccccc 09:48:17 SkyScan query 09:48:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:18 Parameters OK 09:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:18 Set A/D data flow result=40 09:48:18 Set A/D channel type result=40 09:48:18 Set A/D encoding result=40 09:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:18 Set channel filter=0.000000e+000 result=40 09:48:18 Config A/D Result=40 09:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:18 Get A/D filter: -9.255963e+061 result=40 09:48:18 Get A/D value=-858993460 result=40 09:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:18 Parameters OK 09:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:18 Set A/D data flow result=40 09:48:18 Set A/D channel type result=40 09:48:18 Set A/D encoding result=40 09:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:18 Set channel filter=0.000000e+000 result=40 09:48:18 Config A/D Result=40 09:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:18 Get A/D filter: -9.255963e+061 result=40 09:48:18 Get A/D value=-858993460 result=40 09:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:18 Aux= 09:48:18 Message to Camera, serial 270528 queued 09:48:55 Received message from Master: op=PointingHead serial=270541 09:48:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:48:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:48:55 Point started: ret=0 09:48:55 point_skyscan result=0 09:48:56 Check angles 09:48:56 SkyScan query 09:48:57 SkyScan query done: ret=0 az=134.61<-8974 ze=96.735<-5551 Statuses=0009 0009 09:48:57 Msec=0 True Az=134.61 Ze=96.735 Az status=0009 Ze status=0009 09:48:57 Check angles 09:48:57 SkyScan query 09:48:57 SkyScan query done: ret=0 az=130.995<-8733 ze=118.125<-4125 Statuses=0008 0009 09:48:57 Msec=750 True Az=130.995 Ze=118.125 Az status=0008 Ze status=0009 09:48:58 Check angles 09:48:58 SkyScan query 09:48:58 SkyScan query done: ret=0 az=130.995<-8733 ze=139.08<-2728 Statuses=0008 0009 09:48:58 Msec=1500 True Az=130.995 Ze=139.08 Az status=0008 Ze status=0009 09:48:58 Check angles 09:48:58 SkyScan query 09:48:59 SkyScan query done: ret=0 az=130.995<-8733 ze=160.035<-1331 Statuses=0008 0009 09:48:59 Msec=2250 True Az=130.995 Ze=160.035 Az status=0008 Ze status=0009 09:48:59 Check angles 09:48:59 SkyScan query 09:49:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.025<-23935 Statuses=0008 0009 09:49:00 Msec=3000 True Az=130.995 Ze=-179.025 Az status=0008 Ze status=0009 09:49:00 Check angles 09:49:00 SkyScan query 09:49:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.055<-22537 Statuses=0008 0009 09:49:00 Msec=3750 True Az=130.995 Ze=-158.055 Az status=0008 Ze status=0009 09:49:01 Check angles 09:49:01 SkyScan query 09:49:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 09:49:01 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 09:49:01 Check angles 09:49:01 SkyScan query 09:49:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:49:02 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:49:02 Message to Master queued w/err=0: serial=270541 error=0 09:49:07 Received message from Master: op=Filter serial=270542 09:49:07 Color wheel filter change from 0 to 0 09:49:07 FLIGetFilterPos err=0 currentPosition=0 09:49:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:07 Filter is already there-color wheel unchanged 09:49:07 Received message from Master: op=Shutter serial=270543 09:49:07 Shutter LASER close 09:49:07 Received message from Camera: op=State serial=270545 09:49:07 GetSingleValue result=40 Value=cccccccc 09:49:07 SkyScan query 09:49:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:49:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:08 Parameters OK 09:49:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:08 Set A/D data flow result=40 09:49:08 Set A/D channel type result=40 09:49:08 Set A/D encoding result=40 09:49:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:08 Set channel filter=0.000000e+000 result=40 09:49:08 Config A/D Result=40 09:49:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:08 Get A/D filter: -9.255963e+061 result=40 09:49:08 Get A/D value=-858993460 result=40 09:49:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:08 Parameters OK 09:49:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:08 Set A/D data flow result=40 09:49:08 Set A/D channel type result=40 09:49:08 Set A/D encoding result=40 09:49:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:08 Set channel filter=0.000000e+000 result=40 09:49:08 Config A/D Result=40 09:49:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:08 Get A/D filter: -9.255963e+061 result=40 09:49:08 Get A/D value=-858993460 result=40 09:49:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:08 Aux= 09:49:08 Message to Camera, serial 270545 queued 09:49:45 Received message from Master: op=PointingHead serial=270558 09:49:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:49:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:49:45 Point started: ret=0 09:49:45 point_skyscan result=0 09:49:46 Check angles 09:49:46 SkyScan query 09:49:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 09:49:46 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 09:49:46 Check angles 09:49:46 SkyScan query 09:49:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:49:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:49:47 Message to Master queued w/err=0: serial=270558 error=0 09:49:52 Received message from Master: op=Filter serial=270559 09:49:52 Color wheel filter change from 0 to 0 09:49:52 FLIGetFilterPos err=0 currentPosition=0 09:49:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:52 Filter is already there-color wheel unchanged 09:49:52 Received message from Master: op=Shutter serial=270560 09:49:52 Shutter LASER open 09:49:52 Received message from Camera: op=State serial=270562 09:49:52 GetSingleValue result=40 Value=cccccccc 09:49:52 SkyScan query 09:49:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:49:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:53 Parameters OK 09:49:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:53 Set A/D data flow result=40 09:49:53 Set A/D channel type result=40 09:49:53 Set A/D encoding result=40 09:49:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:53 Set channel filter=0.000000e+000 result=40 09:49:53 Config A/D Result=40 09:49:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:53 Get A/D filter: -9.255963e+061 result=40 09:49:53 Get A/D value=-858993460 result=40 09:49:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:53 Parameters OK 09:49:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:53 Set A/D data flow result=40 09:49:53 Set A/D channel type result=40 09:49:53 Set A/D encoding result=40 09:49:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:53 Set channel filter=0.000000e+000 result=40 09:49:53 Config A/D Result=40 09:49:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:53 Get A/D filter: -9.255963e+061 result=40 09:49:53 Get A/D value=-858993460 result=40 09:49:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:53 Aux= 09:49:53 Message to Camera, serial 270562 queued 09:50:01 Received message from Master: op=Shutter serial=270572 09:50:01 Shutter LASER close 09:50:02 Received message from Master: op=PointingHead serial=270576 09:50:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:50:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:50:02 Point started: ret=0 09:50:02 point_skyscan result=0 09:50:03 Check angles 09:50:03 SkyScan query 09:50:04 SkyScan query done: ret=0 az=136.455<-9097 ze=-142.785<-21519 Statuses=0009 0009 09:50:04 Msec=0 True Az=136.455 Ze=-142.785 Az status=0009 Ze status=0009 09:50:04 Check angles 09:50:04 SkyScan query 09:50:04 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.86<-20124 Statuses=0009 0009 09:50:04 Msec=750 True Az=153.96 Ze=-121.86 Az status=0009 Ze status=0009 09:50:05 Check angles 09:50:05 SkyScan query 09:50:05 SkyScan query done: ret=0 az=171.705<-11447 ze=-100.335<-18689 Statuses=0009 0009 09:50:05 Msec=1500 True Az=171.705 Ze=-100.335 Az status=0009 Ze status=0009 09:50:05 Check angles 09:50:05 SkyScan query 09:50:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 09:50:06 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 09:50:06 Check angles 09:50:06 SkyScan query 09:50:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 09:50:07 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 09:50:07 Check angles 09:50:07 SkyScan query 09:50:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:50:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:50:07 Message to Master queued w/err=0: serial=270576 error=0 09:50:12 Received message from Master: op=Filter serial=270577 09:50:12 Color wheel filter change from 0 to 0 09:50:12 FLIGetFilterPos err=0 currentPosition=0 09:50:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:12 Filter is already there-color wheel unchanged 09:50:13 Received message from Master: op=Shutter serial=270578 09:50:13 Shutter LASER close 09:50:13 Received message from Camera: op=State serial=270580 09:50:13 GetSingleValue result=40 Value=cccccccc 09:50:13 SkyScan query 09:50:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:50:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:13 Parameters OK 09:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:13 Set A/D data flow result=40 09:50:13 Set A/D channel type result=40 09:50:13 Set A/D encoding result=40 09:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:13 Set channel filter=0.000000e+000 result=40 09:50:13 Config A/D Result=40 09:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:13 Get A/D filter: -9.255963e+061 result=40 09:50:13 Get A/D value=-858993460 result=40 09:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:13 Parameters OK 09:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:13 Set A/D data flow result=40 09:50:13 Set A/D channel type result=40 09:50:13 Set A/D encoding result=40 09:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:13 Set channel filter=0.000000e+000 result=40 09:50:13 Config A/D Result=40 09:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:13 Get A/D filter: -9.255963e+061 result=40 09:50:13 Get A/D value=-858993460 result=40 09:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:13 Aux= 09:50:13 Message to Camera, serial 270580 queued 09:50:50 Received message from Master: op=PointingHead serial=270593 09:50:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:50:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:50:50 Point started: ret=0 09:50:50 point_skyscan result=0 09:50:51 Check angles 09:50:51 SkyScan query 09:50:52 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.165<-13411 Statuses=0009 0009 09:50:52 Msec=0 True Az=152.58 Ze=-21.165 Az status=0009 Ze status=0009 09:50:52 Check angles 09:50:52 SkyScan query 09:50:53 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.255<-12017 Statuses=0009 0009 09:50:53 Msec=750 True Az=135.105 Ze=-0.255 Az status=0009 Ze status=0009 09:50:53 Check angles 09:50:53 SkyScan query 09:50:53 SkyScan query done: ret=0 az=117.21<-7814 ze=21.18<-10588 Statuses=0009 0009 09:50:53 Msec=1500 True Az=117.21 Ze=21.18 Az status=0009 Ze status=0009 09:50:53 Check angles 09:50:53 SkyScan query 09:50:54 SkyScan query done: ret=0 az=99.825<-6655 ze=42.06<-9196 Statuses=0009 0009 09:50:54 Msec=2250 True Az=99.825 Ze=42.06 Az status=0009 Ze status=0009 09:50:54 Check angles 09:50:54 SkyScan query 09:50:55 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 09:50:55 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 09:50:55 Check angles 09:50:55 SkyScan query 09:50:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:50:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:50:56 Message to Master queued w/err=0: serial=270593 error=0 09:51:01 Received message from Master: op=Filter serial=270594 09:51:01 Color wheel filter change from 0 to 0 09:51:01 FLIGetFilterPos err=0 currentPosition=0 09:51:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:01 Filter is already there-color wheel unchanged 09:51:01 Received message from Master: op=Shutter serial=270595 09:51:01 Shutter LASER close 09:51:01 Received message from Camera: op=State serial=270597 09:51:01 GetSingleValue result=40 Value=cccccccc 09:51:01 SkyScan query 09:51:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:51:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:01 Parameters OK 09:51:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:01 Set A/D data flow result=40 09:51:01 Set A/D channel type result=40 09:51:01 Set A/D encoding result=40 09:51:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:01 Set channel filter=0.000000e+000 result=40 09:51:01 Config A/D Result=40 09:51:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:01 Get A/D filter: -9.255963e+061 result=40 09:51:01 Get A/D value=-858993460 result=40 09:51:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:01 Parameters OK 09:51:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:01 Set A/D data flow result=40 09:51:01 Set A/D channel type result=40 09:51:01 Set A/D encoding result=40 09:51:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:01 Set channel filter=0.000000e+000 result=40 09:51:01 Config A/D Result=40 09:51:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:01 Get A/D filter: -9.255963e+061 result=40 09:51:01 Get A/D value=-858993460 result=40 09:51:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:01 Aux= 09:51:01 Message to Camera, serial 270597 queued 09:51:38 Received message from Master: op=PointingHead serial=270610 09:51:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:51:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:51:39 Point started: ret=0 09:51:39 point_skyscan result=0 09:51:39 Check angles 09:51:39 SkyScan query 09:51:40 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 09:51:40 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 09:51:40 Check angles 09:51:40 SkyScan query 09:51:41 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 09:51:41 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 09:51:41 Check angles 09:51:41 SkyScan query 09:51:41 SkyScan query done: ret=0 az=143.79<-9586 ze=38.505<-9433 Statuses=0009 0008 09:51:41 Msec=1500 True Az=143.79 Ze=38.505 Az status=0009 Ze status=0008 09:51:42 Check angles 09:51:42 SkyScan query 09:51:42 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 09:51:42 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 09:51:42 Check angles 09:51:42 SkyScan query 09:51:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:51:43 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:51:43 Check angles 09:51:43 SkyScan query 09:51:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:51:44 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 09:51:44 Message to Master queued w/err=0: serial=270610 error=0 09:51:49 Received message from Master: op=Filter serial=270611 09:51:49 Color wheel filter change from 0 to 0 09:51:49 FLIGetFilterPos err=0 currentPosition=0 09:51:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:49 Filter is already there-color wheel unchanged 09:51:49 Received message from Master: op=Shutter serial=270612 09:51:49 Shutter LASER close 09:51:49 Received message from Camera: op=State serial=270614 09:51:49 GetSingleValue result=40 Value=cccccccc 09:51:49 SkyScan query 09:51:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:51:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:50 Parameters OK 09:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:50 Set A/D data flow result=40 09:51:50 Set A/D channel type result=40 09:51:50 Set A/D encoding result=40 09:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:50 Set channel filter=0.000000e+000 result=40 09:51:50 Config A/D Result=40 09:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:50 Get A/D filter: -9.255963e+061 result=40 09:51:50 Get A/D value=-858993460 result=40 09:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:50 Parameters OK 09:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:50 Set A/D data flow result=40 09:51:50 Set A/D channel type result=40 09:51:50 Set A/D encoding result=40 09:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:50 Set channel filter=0.000000e+000 result=40 09:51:50 Config A/D Result=40 09:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:50 Get A/D filter: -9.255963e+061 result=40 09:51:50 Get A/D value=-858993460 result=40 09:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:50 Aux= 09:51:50 Message to Camera, serial 270614 queued 09:52:26 Received message from Master: op=PointingHead serial=270627 09:52:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:52:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:52:27 Point started: ret=0 09:52:27 point_skyscan result=0 09:52:28 Check angles 09:52:28 SkyScan query 09:52:28 SkyScan query done: ret=0 az=152.97<-10198 ze=68.355<-7443 Statuses=0009 0009 09:52:28 Msec=0 True Az=152.97 Ze=68.355 Az status=0009 Ze status=0009 09:52:28 Check angles 09:52:28 SkyScan query 09:52:29 SkyScan query done: ret=0 az=135.09<-9006 ze=89.79<-6014 Statuses=0009 0009 09:52:29 Msec=750 True Az=135.09 Ze=89.79 Az status=0009 Ze status=0009 09:52:29 Check angles 09:52:29 SkyScan query 09:52:30 SkyScan query done: ret=0 az=117.66<-7844 ze=110.655<-4623 Statuses=0009 0009 09:52:30 Msec=1500 True Az=117.66 Ze=110.655 Az status=0009 Ze status=0009 09:52:30 Check angles 09:52:30 SkyScan query 09:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=131.685<-3221 Statuses=0008 0009 09:52:30 Msec=2250 True Az=112.995 Ze=131.685 Az status=0008 Ze status=0009 09:52:31 Check angles 09:52:31 SkyScan query 09:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=152.61<-1826 Statuses=0008 0009 09:52:31 Msec=3000 True Az=112.995 Ze=152.61 Az status=0008 Ze status=0009 09:52:31 Check angles 09:52:31 SkyScan query 09:52:32 SkyScan query done: ret=0 az=112.995<-7533 ze=173.595<-427 Statuses=0008 0009 09:52:32 Msec=3750 True Az=112.995 Ze=173.595 Az status=0008 Ze status=0009 09:52:32 Check angles 09:52:32 SkyScan query 09:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 09:52:33 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 09:52:33 Message to Master queued w/err=0: serial=270627 error=0 09:52:38 Received message from Master: op=Filter serial=270628 09:52:38 Color wheel filter change from 0 to 0 09:52:38 FLIGetFilterPos err=0 currentPosition=0 09:52:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:38 Filter is already there-color wheel unchanged 09:52:38 Received message from Master: op=Shutter serial=270629 09:52:38 Shutter LASER open 09:52:38 Received message from Camera: op=State serial=270631 09:52:38 GetSingleValue result=40 Value=cccccccc 09:52:38 SkyScan query 09:52:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:52:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:39 Parameters OK 09:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:39 Set A/D data flow result=40 09:52:39 Set A/D channel type result=40 09:52:39 Set A/D encoding result=40 09:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:39 Set channel filter=0.000000e+000 result=40 09:52:39 Config A/D Result=40 09:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:39 Get A/D filter: -9.255963e+061 result=40 09:52:39 Get A/D value=-858993460 result=40 09:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:39 Parameters OK 09:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:39 Set A/D data flow result=40 09:52:39 Set A/D channel type result=40 09:52:39 Set A/D encoding result=40 09:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:39 Set channel filter=0.000000e+000 result=40 09:52:39 Config A/D Result=40 09:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:39 Get A/D filter: -9.255963e+061 result=40 09:52:39 Get A/D value=-858993460 result=40 09:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:39 Aux= 09:52:39 Message to Camera, serial 270631 queued 09:52:47 Received message from Master: op=Shutter serial=270641 09:52:47 Shutter LASER close 09:52:47 Received message from Master: op=PointingHead serial=270645 09:52:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:52:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:52:48 Point started: ret=0 09:52:48 point_skyscan result=0 09:52:49 Check angles 09:52:49 SkyScan query 09:52:49 SkyScan query done: ret=0 az=89.85<-5990 ze=157.11<-1526 Statuses=0009 0009 09:52:49 Msec=0 True Az=89.85 Ze=157.11 Az status=0009 Ze status=0009 09:52:49 Check angles 09:52:49 SkyScan query 09:52:50 SkyScan query done: ret=0 az=71.91<-4794 ze=135.69<-2954 Statuses=0009 0009 09:52:50 Msec=750 True Az=71.91 Ze=135.69 Az status=0009 Ze status=0009 09:52:50 Check angles 09:52:50 SkyScan query 09:52:51 SkyScan query done: ret=0 az=54.495<-3633 ze=114.66<-4356 Statuses=0009 0009 09:52:51 Msec=1500 True Az=54.495 Ze=114.66 Az status=0009 Ze status=0009 09:52:51 Check angles 09:52:51 SkyScan query 09:52:51 SkyScan query done: ret=0 az=40.98<-2732 ze=93.765<-5749 Statuses=0009 0009 09:52:51 Msec=2250 True Az=40.98 Ze=93.765 Az status=0009 Ze status=0009 09:52:52 Check angles 09:52:52 SkyScan query 09:52:52 SkyScan query done: ret=0 az=40.995<-2733 ze=72.75<-7150 Statuses=0008 0009 09:52:52 Msec=3000 True Az=40.995 Ze=72.75 Az status=0008 Ze status=0009 09:52:52 Check angles 09:52:52 SkyScan query 09:52:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 09:52:53 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 09:52:53 Check angles 09:52:53 SkyScan query 09:52:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:52:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:52:54 Message to Master queued w/err=0: serial=270645 error=0 09:52:59 Received message from Master: op=Filter serial=270646 09:52:59 Color wheel filter change from 0 to 0 09:52:59 FLIGetFilterPos err=0 currentPosition=0 09:52:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:59 Filter is already there-color wheel unchanged 09:52:59 Received message from Master: op=Shutter serial=270647 09:52:59 Shutter LASER close 09:52:59 Received message from Camera: op=State serial=270649 09:52:59 GetSingleValue result=40 Value=cccccccc 09:52:59 SkyScan query 09:53:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:53:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:00 Parameters OK 09:53:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:00 Set A/D data flow result=40 09:53:00 Set A/D channel type result=40 09:53:00 Set A/D encoding result=40 09:53:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:00 Set channel filter=0.000000e+000 result=40 09:53:00 Config A/D Result=40 09:53:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:00 Get A/D filter: -9.255963e+061 result=40 09:53:00 Get A/D value=-858993460 result=40 09:53:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:00 Parameters OK 09:53:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:00 Set A/D data flow result=40 09:53:00 Set A/D channel type result=40 09:53:00 Set A/D encoding result=40 09:53:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:00 Set channel filter=0.000000e+000 result=40 09:53:00 Config A/D Result=40 09:53:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:00 Get A/D filter: -9.255963e+061 result=40 09:53:00 Get A/D value=-858993460 result=40 09:53:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:00 Aux= 09:53:00 Message to Camera, serial 270649 queued 09:53:36 Received message from Master: op=PointingHead serial=270662 09:53:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:53:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:53:37 Point started: ret=0 09:53:37 point_skyscan result=0 09:53:38 Check angles 09:53:38 SkyScan query 09:53:38 SkyScan query done: ret=0 az=64.17<-4278 ze=66.555<-7563 Statuses=0009 0008 09:53:38 Msec=0 True Az=64.17 Ze=66.555 Az status=0009 Ze status=0008 09:53:38 Check angles 09:53:38 SkyScan query 09:53:39 SkyScan query done: ret=0 az=82.11<-5474 ze=66.495<-7567 Statuses=0009 0008 09:53:39 Msec=750 True Az=82.11 Ze=66.495 Az status=0009 Ze status=0008 09:53:39 Check angles 09:53:39 SkyScan query 09:53:40 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 09:53:40 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 09:53:40 Check angles 09:53:40 SkyScan query 09:53:40 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 09:53:40 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 09:53:41 Check angles 09:53:41 SkyScan query 09:53:41 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 09:53:41 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 09:53:41 Check angles 09:53:41 SkyScan query 09:53:42 SkyScan query done: ret=0 az=151.83<-10122 ze=66.495<-7567 Statuses=0009 0008 09:53:42 Msec=3750 True Az=151.83 Ze=66.495 Az status=0009 Ze status=0008 09:53:42 Check angles 09:53:42 SkyScan query 09:53:43 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:53:43 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:53:43 Message to Master queued w/err=0: serial=270662 error=0 09:53:48 Received message from Master: op=Filter serial=270663 09:53:48 Color wheel filter change from 0 to 0 09:53:48 FLIGetFilterPos err=0 currentPosition=0 09:53:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:48 Filter is already there-color wheel unchanged 09:53:48 Received message from Master: op=Shutter serial=270664 09:53:48 Shutter LASER close 09:53:48 Received message from Camera: op=State serial=270666 09:53:48 GetSingleValue result=40 Value=cccccccc 09:53:48 SkyScan query 09:53:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:53:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:49 Parameters OK 09:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:49 Set A/D data flow result=40 09:53:49 Set A/D channel type result=40 09:53:49 Set A/D encoding result=40 09:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:49 Set channel filter=0.000000e+000 result=40 09:53:49 Config A/D Result=40 09:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:49 Get A/D filter: -9.255963e+061 result=40 09:53:49 Get A/D value=-858993460 result=40 09:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:49 Parameters OK 09:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:49 Set A/D data flow result=40 09:53:49 Set A/D channel type result=40 09:53:49 Set A/D encoding result=40 09:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:49 Set channel filter=0.000000e+000 result=40 09:53:49 Config A/D Result=40 09:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:49 Get A/D filter: -9.255963e+061 result=40 09:53:49 Get A/D value=-858993460 result=40 09:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:49 Aux= 09:53:49 Message to Camera, serial 270666 queued 09:54:25 Received message from Master: op=PointingHead serial=270679 09:54:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:54:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:54:26 Point started: ret=0 09:54:26 point_skyscan result=0 09:54:27 Check angles 09:54:27 SkyScan query 09:54:27 SkyScan query done: ret=0 az=134.985<-8999 ze=96.39<-5574 Statuses=0009 0009 09:54:27 Msec=0 True Az=134.985 Ze=96.39 Az status=0009 Ze status=0009 09:54:27 Check angles 09:54:27 SkyScan query 09:54:28 SkyScan query done: ret=0 az=130.995<-8733 ze=117.27<-4182 Statuses=0008 0009 09:54:28 Msec=750 True Az=130.995 Ze=117.27 Az status=0008 Ze status=0009 09:54:28 Check angles 09:54:28 SkyScan query 09:54:29 SkyScan query done: ret=0 az=130.98<-8732 ze=138.255<-2783 Statuses=0008 0009 09:54:29 Msec=1500 True Az=130.98 Ze=138.255 Az status=0008 Ze status=0009 09:54:29 Check angles 09:54:29 SkyScan query 09:54:29 SkyScan query done: ret=0 az=130.995<-8733 ze=159.195<-1387 Statuses=0008 0009 09:54:29 Msec=2250 True Az=130.995 Ze=159.195 Az status=0008 Ze status=0009 09:54:30 Check angles 09:54:30 SkyScan query 09:54:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.835<-23989 Statuses=0008 0009 09:54:30 Msec=3000 True Az=130.995 Ze=-179.835 Az status=0008 Ze status=0009 09:54:30 Check angles 09:54:30 SkyScan query 09:54:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.895<-22593 Statuses=0008 0009 09:54:31 Msec=3750 True Az=130.995 Ze=-158.895 Az status=0008 Ze status=0009 09:54:31 Check angles 09:54:31 SkyScan query 09:54:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 09:54:32 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 09:54:32 Check angles 09:54:32 SkyScan query 09:54:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:54:32 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:54:32 Message to Master queued w/err=0: serial=270679 error=0 [UTC 2018-12-19 09:54:37] 09:54:37 Received message from Master: op=Filter serial=270680 09:54:37 Color wheel filter change from 0 to 0 09:54:37 FLIGetFilterPos err=0 currentPosition=0 09:54:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:37 Filter is already there-color wheel unchanged 09:54:38 Received message from Master: op=Shutter serial=270681 09:54:38 Shutter LASER close 09:54:38 Received message from Camera: op=State serial=270683 09:54:38 GetSingleValue result=40 Value=cccccccc 09:54:38 SkyScan query 09:54:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:54:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:38 Parameters OK 09:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:38 Set A/D data flow result=40 09:54:38 Set A/D channel type result=40 09:54:38 Set A/D encoding result=40 09:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:38 Set channel filter=0.000000e+000 result=40 09:54:38 Config A/D Result=40 09:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:38 Get A/D filter: -9.255963e+061 result=40 09:54:38 Get A/D value=-858993460 result=40 09:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:38 Parameters OK 09:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:38 Set A/D data flow result=40 09:54:38 Set A/D channel type result=40 09:54:38 Set A/D encoding result=40 09:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:38 Set channel filter=0.000000e+000 result=40 09:54:38 Config A/D Result=40 09:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:38 Get A/D filter: -9.255963e+061 result=40 09:54:38 Get A/D value=-858993460 result=40 09:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:38 Aux= 09:54:38 Message to Camera, serial 270683 queued 09:55:15 Received message from Master: op=PointingHead serial=270696 09:55:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:55:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:55:15 Point started: ret=0 09:55:15 point_skyscan result=0 09:55:16 Check angles 09:55:16 SkyScan query 09:55:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.345<-23423 Statuses=0009 0009 09:55:17 Msec=0 True Az=113.01 Ze=-171.345 Az status=0009 Ze status=0009 09:55:17 Check angles 09:55:17 SkyScan query 09:55:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:55:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:55:18 Message to Master queued w/err=0: serial=270696 error=0 09:55:23 Received message from Master: op=Filter serial=270697 09:55:23 Color wheel filter change from 0 to 0 09:55:23 FLIGetFilterPos err=0 currentPosition=0 09:55:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:23 Filter is already there-color wheel unchanged 09:55:23 Received message from Master: op=Shutter serial=270698 09:55:23 Shutter LASER open 09:55:23 Received message from Camera: op=State serial=270700 09:55:23 GetSingleValue result=40 Value=cccccccc 09:55:23 SkyScan query 09:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:55:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:23 Parameters OK 09:55:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:23 Set A/D data flow result=40 09:55:23 Set A/D channel type result=40 09:55:23 Set A/D encoding result=40 09:55:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:23 Set channel filter=0.000000e+000 result=40 09:55:23 Config A/D Result=40 09:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:23 Get A/D filter: -9.255963e+061 result=40 09:55:23 Get A/D value=-858993460 result=40 09:55:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:23 Parameters OK 09:55:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:23 Set A/D data flow result=40 09:55:23 Set A/D channel type result=40 09:55:23 Set A/D encoding result=40 09:55:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:23 Set channel filter=0.000000e+000 result=40 09:55:23 Config A/D Result=40 09:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:23 Get A/D filter: -9.255963e+061 result=40 09:55:23 Get A/D value=-858993460 result=40 09:55:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:23 Aux= 09:55:23 Message to Camera, serial 270700 queued 09:55:32 Received message from Master: op=Shutter serial=270710 09:55:32 Shutter LASER close 09:55:33 Received message from Master: op=PointingHead serial=270714 09:55:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:55:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:55:33 Point started: ret=0 09:55:33 point_skyscan result=0 09:55:34 Check angles 09:55:34 SkyScan query 09:55:34 SkyScan query done: ret=0 az=136.305<-9087 ze=-143.01<-21534 Statuses=0009 0009 09:55:34 Msec=0 True Az=136.305 Ze=-143.01 Az status=0009 Ze status=0009 09:55:34 Check angles 09:55:34 SkyScan query 09:55:35 SkyScan query done: ret=0 az=153.765<-10251 ze=-122.025<-20135 Statuses=0009 0009 09:55:35 Msec=750 True Az=153.765 Ze=-122.025 Az status=0009 Ze status=0009 09:55:35 Check angles 09:55:35 SkyScan query 09:55:36 SkyScan query done: ret=0 az=171.33<-11422 ze=-101.115<-18741 Statuses=0009 0009 09:55:36 Msec=1500 True Az=171.33 Ze=-101.115 Az status=0009 Ze status=0009 09:55:36 Check angles 09:55:36 SkyScan query 09:55:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.175<-17345 Statuses=0008 0009 09:55:37 Msec=2250 True Az=176.01 Ze=-80.175 Az status=0008 Ze status=0009 09:55:37 Check angles 09:55:37 SkyScan query 09:55:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.175<-15945 Statuses=0008 0009 09:55:37 Msec=3000 True Az=175.995 Ze=-59.175 Az status=0008 Ze status=0009 09:55:37 Check angles 09:55:37 SkyScan query 09:55:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:55:38 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:55:38 Message to Master queued w/err=0: serial=270714 error=0 09:55:43 Received message from Master: op=Filter serial=270715 09:55:43 Color wheel filter change from 0 to 0 09:55:43 FLIGetFilterPos err=0 currentPosition=0 09:55:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:43 Filter is already there-color wheel unchanged 09:55:43 Received message from Master: op=Shutter serial=270716 09:55:43 Shutter LASER close 09:55:43 Received message from Camera: op=State serial=270718 09:55:43 GetSingleValue result=40 Value=cccccccc 09:55:43 SkyScan query 09:55:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:55:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:44 Parameters OK 09:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:44 Set A/D data flow result=40 09:55:44 Set A/D channel type result=40 09:55:44 Set A/D encoding result=40 09:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:44 Set channel filter=0.000000e+000 result=40 09:55:44 Config A/D Result=40 09:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:44 Get A/D filter: -9.255963e+061 result=40 09:55:44 Get A/D value=-858993460 result=40 09:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:44 Parameters OK 09:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:44 Set A/D data flow result=40 09:55:44 Set A/D channel type result=40 09:55:44 Set A/D encoding result=40 09:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:44 Set channel filter=0.000000e+000 result=40 09:55:44 Config A/D Result=40 09:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:44 Get A/D filter: -9.255963e+061 result=40 09:55:44 Get A/D value=-858993460 result=40 09:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:44 Aux= 09:55:44 Message to Camera, serial 270718 queued [UTC 2018-12-19 09:55:52] 09:56:20 Received message from Master: op=PointingHead serial=270730 09:56:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:56:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:56:20 Point started: ret=0 09:56:20 point_skyscan result=0 09:56:21 Check angles 09:56:21 SkyScan query 09:56:22 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.6<-13440 Statuses=0009 0009 09:56:22 Msec=0 True Az=152.76 Ze=-21.6 Az status=0009 Ze status=0009 09:56:22 Check angles 09:56:22 SkyScan query 09:56:22 SkyScan query done: ret=0 az=134.925<-8995 ze=-0.225<-12015 Statuses=0009 0009 09:56:22 Msec=750 True Az=134.925 Ze=-0.225 Az status=0009 Ze status=0009 09:56:23 Check angles 09:56:23 SkyScan query 09:56:23 SkyScan query done: ret=0 az=117.51<-7834 ze=20.775<-10615 Statuses=0009 0009 09:56:23 Msec=1500 True Az=117.51 Ze=20.775 Az status=0009 Ze status=0009 09:56:23 Check angles 09:56:23 SkyScan query 09:56:24 SkyScan query done: ret=0 az=100.08<-6672 ze=41.685<-9221 Statuses=0009 0009 09:56:24 Msec=2250 True Az=100.08 Ze=41.685 Az status=0009 Ze status=0009 09:56:24 Check angles 09:56:24 SkyScan query 09:56:25 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:56:25 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:56:25 Check angles 09:56:25 SkyScan query 09:56:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:56:25 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 09:56:25 Message to Master queued w/err=0: serial=270730 error=0 09:56:30 Received message from Master: op=Filter serial=270731 09:56:30 Color wheel filter change from 0 to 0 09:56:30 FLIGetFilterPos err=0 currentPosition=0 09:56:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:30 Filter is already there-color wheel unchanged 09:56:31 Received message from Master: op=Shutter serial=270732 09:56:31 Shutter LASER close 09:56:31 Received message from Camera: op=State serial=270734 09:56:31 GetSingleValue result=40 Value=cccccccc 09:56:31 SkyScan query 09:56:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:56:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:31 Parameters OK 09:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:31 Set A/D data flow result=40 09:56:31 Set A/D channel type result=40 09:56:31 Set A/D encoding result=40 09:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:31 Set channel filter=0.000000e+000 result=40 09:56:31 Config A/D Result=40 09:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:31 Get A/D filter: -9.255963e+061 result=40 09:56:31 Get A/D value=-858993460 result=40 09:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:31 Parameters OK 09:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:31 Set A/D data flow result=40 09:56:31 Set A/D channel type result=40 09:56:31 Set A/D encoding result=40 09:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:31 Set channel filter=0.000000e+000 result=40 09:56:31 Config A/D Result=40 09:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:31 Get A/D filter: -9.255963e+061 result=40 09:56:31 Get A/D value=-858993460 result=40 09:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:31 Aux= 09:56:31 Message to Camera, serial 270734 queued 09:57:07 Received message from Master: op=PointingHead serial=270746 09:57:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:57:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:57:08 Point started: ret=0 09:57:08 point_skyscan result=0 09:57:08 Check angles 09:57:08 SkyScan query 09:57:09 SkyScan query done: ret=0 az=109.17<-7278 ze=38.475<-9435 Statuses=0009 0008 09:57:09 Msec=0 True Az=109.17 Ze=38.475 Az status=0009 Ze status=0008 09:57:09 Check angles 09:57:09 SkyScan query 09:57:10 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 09:57:10 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 09:57:10 Check angles 09:57:10 SkyScan query 09:57:10 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 09:57:10 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 09:57:11 Check angles 09:57:11 SkyScan query 09:57:11 SkyScan query done: ret=0 az=161.67<-10778 ze=38.505<-9433 Statuses=0009 0008 09:57:11 Msec=2250 True Az=161.67 Ze=38.505 Az status=0009 Ze status=0008 09:57:11 Check angles 09:57:11 SkyScan query 09:57:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:57:12 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:57:12 Check angles 09:57:12 SkyScan query 09:57:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:57:13 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 09:57:13 Message to Master queued w/err=0: serial=270746 error=0 09:57:18 Received message from Master: op=Filter serial=270747 09:57:18 Color wheel filter change from 0 to 0 09:57:18 FLIGetFilterPos err=0 currentPosition=0 09:57:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:18 Filter is already there-color wheel unchanged 09:57:18 Received message from Master: op=Shutter serial=270748 09:57:18 Shutter LASER close 09:57:18 Received message from Camera: op=State serial=270750 09:57:18 GetSingleValue result=40 Value=cccccccc 09:57:18 SkyScan query 09:57:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:57:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:19 Parameters OK 09:57:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:19 Set A/D data flow result=40 09:57:19 Set A/D channel type result=40 09:57:19 Set A/D encoding result=40 09:57:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:19 Set channel filter=0.000000e+000 result=40 09:57:19 Config A/D Result=40 09:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:19 Get A/D filter: -9.255963e+061 result=40 09:57:19 Get A/D value=-858993460 result=40 09:57:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:19 Parameters OK 09:57:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:19 Set A/D data flow result=40 09:57:19 Set A/D channel type result=40 09:57:19 Set A/D encoding result=40 09:57:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:19 Set channel filter=0.000000e+000 result=40 09:57:19 Config A/D Result=40 09:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:19 Get A/D filter: -9.255963e+061 result=40 09:57:19 Get A/D value=-858993460 result=40 09:57:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:19 Aux= 09:57:19 Message to Camera, serial 270750 queued 09:57:55 Received message from Master: op=PointingHead serial=270763 09:57:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:57:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:57:56 Point started: ret=0 09:57:56 point_skyscan result=0 09:57:57 Check angles 09:57:57 SkyScan query 09:57:57 SkyScan query done: ret=0 az=152.94<-10196 ze=68.37<-7442 Statuses=0009 0009 09:57:57 Msec=0 True Az=152.94 Ze=68.37 Az status=0009 Ze status=0009 09:57:57 Check angles 09:57:57 SkyScan query 09:57:58 SkyScan query done: ret=0 az=135.435<-9029 ze=89.415<-6039 Statuses=0009 0009 09:57:58 Msec=750 True Az=135.435 Ze=89.415 Az status=0009 Ze status=0009 09:57:58 Check angles 09:57:58 SkyScan query 09:57:59 SkyScan query done: ret=0 az=117.66<-7844 ze=110.685<-4621 Statuses=0009 0009 09:57:59 Msec=1500 True Az=117.66 Ze=110.685 Az status=0009 Ze status=0009 09:57:59 Check angles 09:57:59 SkyScan query 09:57:59 SkyScan query done: ret=0 az=112.98<-7532 ze=131.7<-3220 Statuses=0008 0009 09:57:59 Msec=2250 True Az=112.98 Ze=131.7 Az status=0008 Ze status=0009 09:58:00 Check angles 09:58:00 SkyScan query 09:58:00 SkyScan query done: ret=0 az=112.995<-7533 ze=152.595<-1827 Statuses=0008 0009 09:58:00 Msec=3000 True Az=112.995 Ze=152.595 Az status=0008 Ze status=0009 09:58:00 Check angles 09:58:00 SkyScan query 09:58:01 SkyScan query done: ret=0 az=112.995<-7533 ze=174.03<-398 Statuses=0008 0009 09:58:01 Msec=3750 True Az=112.995 Ze=174.03 Az status=0008 Ze status=0009 09:58:01 Check angles 09:58:01 SkyScan query 09:58:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 09:58:02 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 09:58:02 Message to Master queued w/err=0: serial=270763 error=0 09:58:07 Received message from Master: op=Filter serial=270764 09:58:07 Color wheel filter change from 0 to 0 09:58:07 FLIGetFilterPos err=0 currentPosition=0 09:58:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:07 Filter is already there-color wheel unchanged 09:58:07 Received message from Master: op=Shutter serial=270765 09:58:07 Shutter LASER open 09:58:07 Received message from Camera: op=State serial=270767 09:58:07 GetSingleValue result=40 Value=cccccccc 09:58:07 SkyScan query 09:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:58:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:08 Parameters OK 09:58:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:08 Set A/D data flow result=40 09:58:08 Set A/D channel type result=40 09:58:08 Set A/D encoding result=40 09:58:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:08 Set channel filter=0.000000e+000 result=40 09:58:08 Config A/D Result=40 09:58:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:08 Get A/D filter: -9.255963e+061 result=40 09:58:08 Get A/D value=-858993460 result=40 09:58:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:08 Parameters OK 09:58:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:08 Set A/D data flow result=40 09:58:08 Set A/D channel type result=40 09:58:08 Set A/D encoding result=40 09:58:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:08 Set channel filter=0.000000e+000 result=40 09:58:08 Config A/D Result=40 09:58:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:08 Get A/D filter: -9.255963e+061 result=40 09:58:08 Get A/D value=-858993460 result=40 09:58:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:08 Aux= 09:58:08 Message to Camera, serial 270767 queued 09:58:16 Received message from Master: op=Shutter serial=270777 09:58:16 Shutter LASER close 09:58:16 Received message from Master: op=PointingHead serial=270781 09:58:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:58:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:58:17 Point started: ret=0 09:58:17 point_skyscan result=0 09:58:18 Check angles 09:58:18 SkyScan query 09:58:18 SkyScan query done: ret=0 az=90.06<-6004 ze=157.335<-1511 Statuses=0009 0009 09:58:18 Msec=0 True Az=90.06 Ze=157.335 Az status=0009 Ze status=0009 09:58:18 Check angles 09:58:18 SkyScan query 09:58:19 SkyScan query done: ret=0 az=72.555<-4837 ze=136.365<-2909 Statuses=0009 0009 09:58:19 Msec=750 True Az=72.555 Ze=136.365 Az status=0009 Ze status=0009 09:58:19 Check angles 09:58:19 SkyScan query 09:58:20 SkyScan query done: ret=0 az=55.14<-3676 ze=115.47<-4302 Statuses=0009 0009 09:58:20 Msec=1500 True Az=55.14 Ze=115.47 Az status=0009 Ze status=0009 09:58:20 Check angles 09:58:20 SkyScan query 09:58:20 SkyScan query done: ret=0 az=40.98<-2732 ze=94.44<-5704 Statuses=0009 0009 09:58:20 Msec=2250 True Az=40.98 Ze=94.44 Az status=0009 Ze status=0009 09:58:21 Check angles 09:58:21 SkyScan query 09:58:21 SkyScan query done: ret=0 az=40.995<-2733 ze=73.515<-7099 Statuses=0008 0009 09:58:21 Msec=3000 True Az=40.995 Ze=73.515 Az status=0008 Ze status=0009 09:58:21 Check angles 09:58:21 SkyScan query 09:58:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.905<-8473 Statuses=0008 0009 09:58:22 Msec=3750 True Az=40.995 Ze=52.905 Az status=0008 Ze status=0009 09:58:22 Check angles 09:58:22 SkyScan query 09:58:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:58:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:58:23 Message to Master queued w/err=0: serial=270781 error=0 09:58:28 Received message from Master: op=Filter serial=270782 09:58:28 Color wheel filter change from 0 to 0 09:58:28 FLIGetFilterPos err=0 currentPosition=0 09:58:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:28 Filter is already there-color wheel unchanged 09:58:28 Received message from Master: op=Shutter serial=270783 09:58:28 Shutter LASER close 09:58:28 Received message from Camera: op=State serial=270785 09:58:28 GetSingleValue result=40 Value=cccccccc 09:58:28 SkyScan query 09:58:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:58:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:29 Parameters OK 09:58:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:29 Set A/D data flow result=40 09:58:29 Set A/D channel type result=40 09:58:29 Set A/D encoding result=40 09:58:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:29 Set channel filter=0.000000e+000 result=40 09:58:29 Config A/D Result=40 09:58:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:29 Get A/D filter: -9.255963e+061 result=40 09:58:29 Get A/D value=-858993460 result=40 09:58:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:29 Parameters OK 09:58:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:29 Set A/D data flow result=40 09:58:29 Set A/D channel type result=40 09:58:29 Set A/D encoding result=40 09:58:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:29 Set channel filter=0.000000e+000 result=40 09:58:29 Config A/D Result=40 09:58:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:29 Get A/D filter: -9.255963e+061 result=40 09:58:29 Get A/D value=-858993460 result=40 09:58:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:29 Aux= 09:58:29 Message to Camera, serial 270785 queued 09:59:05 Received message from Master: op=PointingHead serial=270798 09:59:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:59:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:59:06 Point started: ret=0 09:59:06 point_skyscan result=0 09:59:06 Check angles 09:59:06 SkyScan query 09:59:07 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 09:59:07 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 09:59:07 Check angles 09:59:07 SkyScan query 09:59:08 SkyScan query done: ret=0 az=81.87<-5458 ze=66.495<-7567 Statuses=0009 0008 09:59:08 Msec=750 True Az=81.87 Ze=66.495 Az status=0009 Ze status=0008 09:59:08 Check angles 09:59:08 SkyScan query 09:59:09 SkyScan query done: ret=0 az=99.795<-6653 ze=66.495<-7567 Statuses=0009 0008 09:59:09 Msec=1500 True Az=99.795 Ze=66.495 Az status=0009 Ze status=0008 09:59:09 Check angles 09:59:09 SkyScan query 09:59:09 SkyScan query done: ret=0 az=117.27<-7818 ze=66.495<-7567 Statuses=0009 0008 09:59:09 Msec=2250 True Az=117.27 Ze=66.495 Az status=0009 Ze status=0008 09:59:10 Check angles 09:59:10 SkyScan query 09:59:10 SkyScan query done: ret=0 az=135.15<-9010 ze=66.495<-7567 Statuses=0009 0008 09:59:10 Msec=3000 True Az=135.15 Ze=66.495 Az status=0009 Ze status=0008 09:59:10 Check angles 09:59:10 SkyScan query 09:59:11 SkyScan query done: ret=0 az=152.79<-10186 ze=66.495<-7567 Statuses=0009 0008 09:59:11 Msec=3750 True Az=152.79 Ze=66.495 Az status=0009 Ze status=0008 09:59:11 Check angles 09:59:11 SkyScan query 09:59:12 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:59:12 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:59:12 Message to Master queued w/err=0: serial=270798 error=0 09:59:17 Received message from Master: op=Filter serial=270799 09:59:17 Color wheel filter change from 0 to 0 09:59:17 FLIGetFilterPos err=0 currentPosition=0 09:59:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:17 Filter is already there-color wheel unchanged 09:59:17 Received message from Master: op=Shutter serial=270800 09:59:17 Shutter LASER close 09:59:17 Received message from Camera: op=State serial=270802 09:59:17 GetSingleValue result=40 Value=cccccccc 09:59:17 SkyScan query 09:59:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:59:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:17 Parameters OK 09:59:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:17 Set A/D data flow result=40 09:59:17 Set A/D channel type result=40 09:59:17 Set A/D encoding result=40 09:59:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:17 Set channel filter=0.000000e+000 result=40 09:59:17 Config A/D Result=40 09:59:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:17 Get A/D filter: -9.255963e+061 result=40 09:59:17 Get A/D value=-858993460 result=40 09:59:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:17 Parameters OK 09:59:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:17 Set A/D data flow result=40 09:59:17 Set A/D channel type result=40 09:59:17 Set A/D encoding result=40 09:59:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:17 Set channel filter=0.000000e+000 result=40 09:59:17 Config A/D Result=40 09:59:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:17 Get A/D filter: -9.255963e+061 result=40 09:59:17 Get A/D value=-858993460 result=40 09:59:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:17 Aux= 09:59:17 Message to Camera, serial 270802 queued 09:59:54 Received message from Master: op=PointingHead serial=270815 09:59:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:59:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:59:55 Point started: ret=0 09:59:55 point_skyscan result=0 09:59:56 Check angles 09:59:56 SkyScan query 09:59:56 SkyScan query done: ret=0 az=135.045<-9003 ze=96.24<-5584 Statuses=0009 0009 09:59:56 Msec=0 True Az=135.045 Ze=96.24 Az status=0009 Ze status=0009 09:59:56 Check angles 09:59:56 SkyScan query 09:59:57 SkyScan query done: ret=0 az=130.995<-8733 ze=117.15<-4190 Statuses=0008 0009 09:59:57 Msec=750 True Az=130.995 Ze=117.15 Az status=0008 Ze status=0009 09:59:57 Check angles 09:59:57 SkyScan query 09:59:58 SkyScan query done: ret=0 az=130.98<-8732 ze=138.105<-2793 Statuses=0008 0009 09:59:58 Msec=1500 True Az=130.98 Ze=138.105 Az status=0008 Ze status=0009 09:59:58 Check angles 09:59:58 SkyScan query 09:59:58 SkyScan query done: ret=0 az=130.995<-8733 ze=159.045<-1397 Statuses=0008 0009 09:59:58 Msec=2250 True Az=130.995 Ze=159.045 Az status=0008 Ze status=0009 09:59:59 Check angles 09:59:59 SkyScan query 09:59:59 SkyScan query done: ret=0 az=130.995<-8733 ze=180<-0 Statuses=0008 0009 09:59:59 Msec=3000 True Az=130.995 Ze=180 Az status=0008 Ze status=0009 09:59:59 Check angles 09:59:59 SkyScan query 10:00:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-159.045<-22603 Statuses=0008 0009 10:00:00 Msec=3750 True Az=130.995 Ze=-159.045 Az status=0008 Ze status=0009 10:00:00 Check angles 10:00:00 SkyScan query 10:00:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.39<-21426 Statuses=0008 0009 10:00:01 Msec=4500 True Az=130.995 Ze=-141.39 Az status=0008 Ze status=0009 10:00:01 Check angles 10:00:01 SkyScan query 10:00:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 10:00:01 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 10:00:01 Message to Master queued w/err=0: serial=270815 error=0 10:00:06 Received message from Master: op=Filter serial=270816 10:00:06 Color wheel filter change from 0 to 0 10:00:06 FLIGetFilterPos err=0 currentPosition=0 10:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:06 Filter is already there-color wheel unchanged 10:00:07 Received message from Master: op=Shutter serial=270817 10:00:07 Shutter LASER close 10:00:07 Received message from Camera: op=State serial=270819 10:00:07 GetSingleValue result=40 Value=cccccccc 10:00:07 SkyScan query 10:00:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:07 Parameters OK 10:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:07 Set A/D data flow result=40 10:00:07 Set A/D channel type result=40 10:00:07 Set A/D encoding result=40 10:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:07 Set channel filter=0.000000e+000 result=40 10:00:07 Config A/D Result=40 10:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:07 Get A/D filter: -9.255963e+061 result=40 10:00:07 Get A/D value=-858993460 result=40 10:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:07 Parameters OK 10:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:07 Set A/D data flow result=40 10:00:07 Set A/D channel type result=40 10:00:07 Set A/D encoding result=40 10:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:07 Set channel filter=0.000000e+000 result=40 10:00:07 Config A/D Result=40 10:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:07 Get A/D filter: -9.255963e+061 result=40 10:00:07 Get A/D value=-858993460 result=40 10:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:07 Aux= 10:00:07 Message to Camera, serial 270819 queued 10:00:44 Received message from Master: op=PointingHead serial=270832 10:00:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:00:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:00:44 Point started: ret=0 10:00:44 point_skyscan result=0 10:00:45 Check angles 10:00:45 SkyScan query 10:00:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 10:00:46 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 10:00:46 Check angles 10:00:46 SkyScan query 10:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:00:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:00:46 Message to Master queued w/err=0: serial=270832 error=0 10:00:51 Received message from Master: op=Filter serial=270833 10:00:51 Color wheel filter change from 0 to 0 10:00:51 FLIGetFilterPos err=0 currentPosition=0 10:00:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:51 Filter is already there-color wheel unchanged 10:00:52 Received message from Master: op=Shutter serial=270834 10:00:52 Shutter LASER open 10:00:52 Received message from Camera: op=State serial=270836 10:00:52 GetSingleValue result=40 Value=cccccccc 10:00:52 SkyScan query 10:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:00:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:52 Parameters OK 10:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:52 Set A/D data flow result=40 10:00:52 Set A/D channel type result=40 10:00:52 Set A/D encoding result=40 10:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:52 Set channel filter=0.000000e+000 result=40 10:00:52 Config A/D Result=40 10:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:52 Get A/D filter: -9.255963e+061 result=40 10:00:52 Get A/D value=-858993460 result=40 10:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:52 Parameters OK 10:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:52 Set A/D data flow result=40 10:00:52 Set A/D channel type result=40 10:00:52 Set A/D encoding result=40 10:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:52 Set channel filter=0.000000e+000 result=40 10:00:52 Config A/D Result=40 10:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:52 Get A/D filter: -9.255963e+061 result=40 10:00:52 Get A/D value=-858993460 result=40 10:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:52 Aux= 10:00:52 Message to Camera, serial 270836 queued 10:01:01 Received message from Master: op=Shutter serial=270846 10:01:01 Shutter LASER close 10:01:01 Received message from Master: op=PointingHead serial=270850 10:01:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:01:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:01:02 Point started: ret=0 10:01:02 point_skyscan result=0 10:01:02 Check angles 10:01:02 SkyScan query 10:01:03 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.905<-21527 Statuses=0009 0009 10:01:03 Msec=0 True Az=136.17 Ze=-142.905 Az status=0009 Ze status=0009 10:01:03 Check angles 10:01:03 SkyScan query 10:01:04 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.01<-20134 Statuses=0009 0009 10:01:04 Msec=750 True Az=153.645 Ze=-122.01 Az status=0009 Ze status=0009 10:01:04 Check angles 10:01:04 SkyScan query 10:01:05 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.485<-18699 Statuses=0009 0009 10:01:05 Msec=1500 True Az=171.555 Ze=-100.485 Az status=0009 Ze status=0009 10:01:05 Check angles 10:01:05 SkyScan query 10:01:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 10:01:05 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 10:01:05 Check angles 10:01:05 SkyScan query 10:01:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 10:01:06 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 10:01:06 Check angles 10:01:06 SkyScan query 10:01:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 10:01:07 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 10:01:07 Message to Master queued w/err=0: serial=270850 error=0 10:01:12 Received message from Master: op=Filter serial=270851 10:01:12 Color wheel filter change from 0 to 0 10:01:12 FLIGetFilterPos err=0 currentPosition=0 10:01:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:12 Filter is already there-color wheel unchanged 10:01:12 Received message from Master: op=Shutter serial=270852 10:01:12 Shutter LASER close 10:01:12 Received message from Camera: op=State serial=270854 10:01:12 GetSingleValue result=40 Value=cccccccc 10:01:12 SkyScan query 10:01:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:01:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:13 Parameters OK 10:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:13 Set A/D data flow result=40 10:01:13 Set A/D channel type result=40 10:01:13 Set A/D encoding result=40 10:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:13 Set channel filter=0.000000e+000 result=40 10:01:13 Config A/D Result=40 10:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:13 Get A/D filter: -9.255963e+061 result=40 10:01:13 Get A/D value=-858993460 result=40 10:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:13 Parameters OK 10:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:13 Set A/D data flow result=40 10:01:13 Set A/D channel type result=40 10:01:13 Set A/D encoding result=40 10:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:13 Set channel filter=0.000000e+000 result=40 10:01:13 Config A/D Result=40 10:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:13 Get A/D filter: -9.255963e+061 result=40 10:01:13 Get A/D value=-858993460 result=40 10:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:13 Aux= 10:01:13 Message to Camera, serial 270854 queued 10:01:49 Received message from Master: op=PointingHead serial=270866 10:01:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:01:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:01:49 Point started: ret=0 10:01:49 point_skyscan result=0 10:01:50 Check angles 10:01:50 SkyScan query 10:01:50 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.825<-13455 Statuses=0009 0009 10:01:50 Msec=0 True Az=152.97 Ze=-21.825 Az status=0009 Ze status=0009 10:01:51 Check angles 10:01:51 SkyScan query 10:01:51 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.42<-12028 Statuses=0009 0009 10:01:51 Msec=750 True Az=135.15 Ze=-0.42 Az status=0009 Ze status=0009 10:01:51 Check angles 10:01:51 SkyScan query 10:01:52 SkyScan query done: ret=0 az=117.66<-7844 ze=20.565<-10629 Statuses=0009 0009 10:01:52 Msec=1500 True Az=117.66 Ze=20.565 Az status=0009 Ze status=0009 10:01:52 Check angles 10:01:52 SkyScan query 10:01:53 SkyScan query done: ret=0 az=100.305<-6687 ze=41.505<-9233 Statuses=0009 0009 10:01:53 Msec=2250 True Az=100.305 Ze=41.505 Az status=0009 Ze status=0009 10:01:53 Check angles 10:01:53 SkyScan query 10:01:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:01:53 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:01:54 Check angles 10:01:54 SkyScan query 10:01:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:01:54 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 10:01:54 Message to Master queued w/err=0: serial=270866 error=0 10:01:59 Received message from Master: op=Filter serial=270867 10:01:59 Color wheel filter change from 0 to 0 10:01:59 FLIGetFilterPos err=0 currentPosition=0 10:01:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:59 Filter is already there-color wheel unchanged 10:01:59 Received message from Master: op=Shutter serial=270868 10:01:59 Shutter LASER close 10:01:59 Received message from Camera: op=State serial=270870 10:01:59 GetSingleValue result=40 Value=cccccccc 10:01:59 SkyScan query 10:02:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 10:02:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:00 Parameters OK 10:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:00 Set A/D data flow result=40 10:02:00 Set A/D channel type result=40 10:02:00 Set A/D encoding result=40 10:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:00 Set channel filter=0.000000e+000 result=40 10:02:00 Config A/D Result=40 10:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:00 Get A/D filter: -9.255963e+061 result=40 10:02:00 Get A/D value=-858993460 result=40 10:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:00 Parameters OK 10:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:00 Set A/D data flow result=40 10:02:00 Set A/D channel type result=40 10:02:00 Set A/D encoding result=40 10:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:00 Set channel filter=0.000000e+000 result=40 10:02:00 Config A/D Result=40 10:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:00 Get A/D filter: -9.255963e+061 result=40 10:02:00 Get A/D value=-858993460 result=40 10:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:00 Aux= 10:02:00 Message to Camera, serial 270870 queued 10:02:37 Received message from Master: op=PointingHead serial=270883 10:02:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:02:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:02:37 Point started: ret=0 10:02:37 point_skyscan result=0 10:02:38 Check angles 10:02:38 SkyScan query 10:02:38 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 10:02:38 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 10:02:39 Check angles 10:02:39 SkyScan query 10:02:39 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 10:02:39 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 10:02:39 Check angles 10:02:39 SkyScan query 10:02:40 SkyScan query done: ret=0 az=144.675<-9645 ze=38.505<-9433 Statuses=0009 0008 10:02:40 Msec=1500 True Az=144.675 Ze=38.505 Az status=0009 Ze status=0008 10:02:40 Check angles 10:02:40 SkyScan query 10:02:41 SkyScan query done: ret=0 az=162.03<-10802 ze=38.505<-9433 Statuses=0009 0008 10:02:41 Msec=2250 True Az=162.03 Ze=38.505 Az status=0009 Ze status=0008 10:02:41 Check angles 10:02:41 SkyScan query 10:02:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:02:41 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:02:42 Check angles 10:02:42 SkyScan query 10:02:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:02:42 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:02:42 Message to Master queued w/err=0: serial=270883 error=0 10:02:47 Received message from Master: op=Filter serial=270884 10:02:47 Color wheel filter change from 0 to 0 10:02:47 FLIGetFilterPos err=0 currentPosition=0 10:02:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:47 Filter is already there-color wheel unchanged 10:02:47 Received message from Master: op=Shutter serial=270885 10:02:47 Shutter LASER close 10:02:47 Received message from Camera: op=State serial=270887 10:02:47 GetSingleValue result=40 Value=cccccccc 10:02:47 SkyScan query 10:02:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:02:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:48 Parameters OK 10:02:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:48 Set A/D data flow result=40 10:02:48 Set A/D channel type result=40 10:02:48 Set A/D encoding result=40 10:02:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:48 Set channel filter=0.000000e+000 result=40 10:02:48 Config A/D Result=40 10:02:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:48 Get A/D filter: -9.255963e+061 result=40 10:02:48 Get A/D value=-858993460 result=40 10:02:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:48 Parameters OK 10:02:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:48 Set A/D data flow result=40 10:02:48 Set A/D channel type result=40 10:02:48 Set A/D encoding result=40 10:02:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:48 Set channel filter=0.000000e+000 result=40 10:02:48 Config A/D Result=40 10:02:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:48 Get A/D filter: -9.255963e+061 result=40 10:02:48 Get A/D value=-858993460 result=40 10:02:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:48 Aux= 10:02:48 Message to Camera, serial 270887 queued 10:03:25 Received message from Master: op=PointingHead serial=270900 10:03:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:03:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:03:25 Point started: ret=0 10:03:25 point_skyscan result=0 10:03:26 Check angles 10:03:26 SkyScan query 10:03:27 SkyScan query done: ret=0 az=152.97<-10198 ze=68.265<-7449 Statuses=0009 0009 10:03:27 Msec=0 True Az=152.97 Ze=68.265 Az status=0009 Ze status=0009 10:03:27 Check angles 10:03:27 SkyScan query 10:03:27 SkyScan query done: ret=0 az=135.18<-9012 ze=89.715<-6019 Statuses=0009 0009 10:03:27 Msec=750 True Az=135.18 Ze=89.715 Az status=0009 Ze status=0009 10:03:28 Check angles 10:03:28 SkyScan query 10:03:28 SkyScan query done: ret=0 az=117.705<-7847 ze=110.595<-4627 Statuses=0009 0009 10:03:28 Msec=1500 True Az=117.705 Ze=110.595 Az status=0009 Ze status=0009 10:03:28 Check angles 10:03:28 SkyScan query 10:03:29 SkyScan query done: ret=0 az=112.995<-7533 ze=131.61<-3226 Statuses=0008 0009 10:03:29 Msec=2250 True Az=112.995 Ze=131.61 Az status=0008 Ze status=0009 10:03:29 Check angles 10:03:29 SkyScan query 10:03:30 SkyScan query done: ret=0 az=112.995<-7533 ze=152.985<-1801 Statuses=0008 0009 10:03:30 Msec=3000 True Az=112.995 Ze=152.985 Az status=0008 Ze status=0009 10:03:30 Check angles 10:03:30 SkyScan query 10:03:30 SkyScan query done: ret=0 az=112.995<-7533 ze=173.895<-407 Statuses=0008 0009 10:03:30 Msec=3750 True Az=112.995 Ze=173.895 Az status=0008 Ze status=0009 10:03:31 Check angles 10:03:31 SkyScan query 10:03:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.92<-23528 Statuses=0008 0008 10:03:31 Msec=4500 True Az=112.995 Ze=-172.92 Az status=0008 Ze status=0008 10:03:31 Message to Master queued w/err=0: serial=270900 error=0 10:03:36 Received message from Master: op=Filter serial=270901 10:03:36 Color wheel filter change from 0 to 0 10:03:36 FLIGetFilterPos err=0 currentPosition=0 10:03:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:36 Filter is already there-color wheel unchanged 10:03:36 Received message from Master: op=Shutter serial=270902 10:03:36 Shutter LASER open 10:03:36 Received message from Camera: op=State serial=270904 10:03:36 GetSingleValue result=40 Value=cccccccc 10:03:36 SkyScan query 10:03:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:03:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:37 Parameters OK 10:03:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:37 Set A/D data flow result=40 10:03:37 Set A/D channel type result=40 10:03:37 Set A/D encoding result=40 10:03:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:37 Set channel filter=0.000000e+000 result=40 10:03:37 Config A/D Result=40 10:03:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:37 Get A/D filter: -9.255963e+061 result=40 10:03:37 Get A/D value=-858993460 result=40 10:03:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:37 Parameters OK 10:03:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:37 Set A/D data flow result=40 10:03:37 Set A/D channel type result=40 10:03:37 Set A/D encoding result=40 10:03:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:37 Set channel filter=0.000000e+000 result=40 10:03:37 Config A/D Result=40 10:03:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:37 Get A/D filter: -9.255963e+061 result=40 10:03:37 Get A/D value=-858993460 result=40 10:03:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:37 Aux= 10:03:37 Message to Camera, serial 270904 queued 10:03:45 Received message from Master: op=Shutter serial=270914 10:03:45 Shutter LASER close 10:03:46 Received message from Master: op=PointingHead serial=270918 10:03:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:03:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:03:46 Point started: ret=0 10:03:46 point_skyscan result=0 10:03:47 Check angles 10:03:47 SkyScan query 10:03:48 SkyScan query done: ret=0 az=89.685<-5979 ze=156.975<-1535 Statuses=0009 0009 10:03:48 Msec=0 True Az=89.685 Ze=156.975 Az status=0009 Ze status=0009 10:03:48 Check angles 10:03:48 SkyScan query 10:03:48 SkyScan query done: ret=0 az=72.27<-4818 ze=135.99<-2934 Statuses=0009 0009 10:03:48 Msec=750 True Az=72.27 Ze=135.99 Az status=0009 Ze status=0009 10:03:49 Check angles 10:03:49 SkyScan query 10:03:49 SkyScan query done: ret=0 az=54.84<-3656 ze=115.065<-4329 Statuses=0009 0009 10:03:49 Msec=1500 True Az=54.84 Ze=115.065 Az status=0009 Ze status=0009 10:03:49 Check angles 10:03:49 SkyScan query 10:03:50 SkyScan query done: ret=0 az=40.98<-2732 ze=94.065<-5729 Statuses=0009 0009 10:03:50 Msec=2250 True Az=40.98 Ze=94.065 Az status=0009 Ze status=0009 10:03:50 Check angles 10:03:50 SkyScan query 10:03:51 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 10:03:51 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 10:03:51 Check angles 10:03:51 SkyScan query 10:03:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 10:03:51 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 10:03:52 Check angles 10:03:52 SkyScan query 10:03:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:03:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:03:52 Message to Master queued w/err=0: serial=270918 error=0 10:03:57 Received message from Master: op=Filter serial=270919 10:03:57 Color wheel filter change from 0 to 0 10:03:57 FLIGetFilterPos err=0 currentPosition=0 10:03:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:57 Filter is already there-color wheel unchanged 10:03:57 Received message from Master: op=Shutter serial=270920 10:03:57 Shutter LASER close 10:03:58 Received message from Camera: op=State serial=270922 10:03:58 GetSingleValue result=40 Value=cccccccc 10:03:58 SkyScan query 10:03:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:03:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:58 Parameters OK 10:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:58 Set A/D data flow result=40 10:03:58 Set A/D channel type result=40 10:03:58 Set A/D encoding result=40 10:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:58 Set channel filter=0.000000e+000 result=40 10:03:58 Config A/D Result=40 10:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:58 Get A/D filter: -9.255963e+061 result=40 10:03:58 Get A/D value=-858993460 result=40 10:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:58 Parameters OK 10:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:58 Set A/D data flow result=40 10:03:58 Set A/D channel type result=40 10:03:58 Set A/D encoding result=40 10:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:58 Set channel filter=0.000000e+000 result=40 10:03:58 Config A/D Result=40 10:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:58 Get A/D filter: -9.255963e+061 result=40 10:03:58 Get A/D value=-858993460 result=40 10:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:58 Aux= 10:03:58 Message to Camera, serial 270922 queued 10:04:35 Received message from Master: op=PointingHead serial=270935 10:04:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:04:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:04:35 Point started: ret=0 10:04:35 point_skyscan result=0 10:04:36 Check angles 10:04:36 SkyScan query 10:04:37 SkyScan query done: ret=0 az=63.855<-4257 ze=66.555<-7563 Statuses=0009 0008 10:04:37 Msec=0 True Az=63.855 Ze=66.555 Az status=0009 Ze status=0008 10:04:37 Check angles 10:04:37 SkyScan query 10:04:37 SkyScan query done: ret=0 az=81.69<-5446 ze=66.495<-7567 Statuses=0009 0008 10:04:37 Msec=750 True Az=81.69 Ze=66.495 Az status=0009 Ze status=0008 10:04:38 Check angles 10:04:38 SkyScan query 10:04:38 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 10:04:38 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 10:04:38 Check angles 10:04:38 SkyScan query 10:04:39 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 10:04:39 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 10:04:39 Check angles 10:04:39 SkyScan query 10:04:40 SkyScan query done: ret=0 az=134.43<-8962 ze=66.495<-7567 Statuses=0009 0008 10:04:40 Msec=3000 True Az=134.43 Ze=66.495 Az status=0009 Ze status=0008 10:04:40 Check angles 10:04:40 SkyScan query 10:04:40 SkyScan query done: ret=0 az=151.8<-10120 ze=66.495<-7567 Statuses=0009 0008 10:04:40 Msec=3750 True Az=151.8 Ze=66.495 Az status=0009 Ze status=0008 10:04:41 Check angles 10:04:41 SkyScan query 10:04:41 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:04:41 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:04:41 Message to Master queued w/err=0: serial=270935 error=0 10:04:46 Received message from Master: op=Filter serial=270936 10:04:46 Color wheel filter change from 0 to 0 10:04:46 FLIGetFilterPos err=0 currentPosition=0 10:04:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:46 Filter is already there-color wheel unchanged 10:04:46 Received message from Master: op=Shutter serial=270937 10:04:46 Shutter LASER close 10:04:46 Received message from Camera: op=State serial=270939 10:04:46 GetSingleValue result=40 Value=cccccccc 10:04:46 SkyScan query 10:04:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:04:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:47 Parameters OK 10:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:47 Set A/D data flow result=40 10:04:47 Set A/D channel type result=40 10:04:47 Set A/D encoding result=40 10:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:47 Set channel filter=0.000000e+000 result=40 10:04:47 Config A/D Result=40 10:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:47 Get A/D filter: -9.255963e+061 result=40 10:04:47 Get A/D value=-858993460 result=40 10:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:47 Parameters OK 10:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:47 Set A/D data flow result=40 10:04:47 Set A/D channel type result=40 10:04:47 Set A/D encoding result=40 10:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:47 Set channel filter=0.000000e+000 result=40 10:04:47 Config A/D Result=40 10:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:47 Get A/D filter: -9.255963e+061 result=40 10:04:47 Get A/D value=-858993460 result=40 10:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:47 Aux= 10:04:47 Message to Camera, serial 270939 queued 10:05:24 Received message from Master: op=PointingHead serial=270952 10:05:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:05:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:05:24 Point started: ret=0 10:05:24 point_skyscan result=0 10:05:25 Check angles 10:05:25 SkyScan query 10:05:26 SkyScan query done: ret=0 az=134.985<-8999 ze=96.315<-5579 Statuses=0009 0009 10:05:26 Msec=0 True Az=134.985 Ze=96.315 Az status=0009 Ze status=0009 10:05:26 Check angles 10:05:26 SkyScan query 10:05:26 SkyScan query done: ret=0 az=130.995<-8733 ze=117.225<-4185 Statuses=0008 0009 10:05:26 Msec=750 True Az=130.995 Ze=117.225 Az status=0008 Ze status=0009 10:05:27 Check angles 10:05:27 SkyScan query 10:05:27 SkyScan query done: ret=0 az=130.995<-8733 ze=138.21<-2786 Statuses=0008 0009 10:05:27 Msec=1500 True Az=130.995 Ze=138.21 Az status=0008 Ze status=0009 10:05:27 Check angles 10:05:27 SkyScan query 10:05:28 SkyScan query done: ret=0 az=130.995<-8733 ze=159.6<-1360 Statuses=0008 0009 10:05:28 Msec=2250 True Az=130.995 Ze=159.6 Az status=0008 Ze status=0009 10:05:28 Check angles 10:05:28 SkyScan query 10:05:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.04<-23936 Statuses=0008 0009 10:05:29 Msec=3000 True Az=130.995 Ze=-179.04 Az status=0008 Ze status=0009 10:05:29 Check angles 10:05:29 SkyScan query 10:05:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.055<-22537 Statuses=0008 0009 10:05:29 Msec=3750 True Az=130.995 Ze=-158.055 Az status=0008 Ze status=0009 10:05:30 Check angles 10:05:30 SkyScan query 10:05:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 10:05:30 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 10:05:30 Check angles 10:05:30 SkyScan query 10:05:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 10:05:31 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 10:05:31 Message to Master queued w/err=0: serial=270952 error=0 10:05:36 Received message from Master: op=Filter serial=270953 10:05:36 Color wheel filter change from 0 to 0 10:05:36 FLIGetFilterPos err=0 currentPosition=0 10:05:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:36 Filter is already there-color wheel unchanged 10:05:36 Received message from Master: op=Shutter serial=270954 10:05:36 Shutter LASER close 10:05:36 Received message from Camera: op=State serial=270956 10:05:36 GetSingleValue result=40 Value=cccccccc 10:05:36 SkyScan query 10:05:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:05:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:37 Parameters OK 10:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:37 Set A/D data flow result=40 10:05:37 Set A/D channel type result=40 [UTC 2018-12-19 10:05:37] 10:05:37 Set A/D encoding result=40 10:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:37 Set channel filter=0.000000e+000 result=40 10:05:37 Config A/D Result=40 10:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:37 Get A/D filter: -9.255963e+061 result=40 10:05:37 Get A/D value=-858993460 result=40 10:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:37 Parameters OK 10:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:37 Set A/D data flow result=40 10:05:37 Set A/D channel type result=40 10:05:37 Set A/D encoding result=40 10:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:37 Set channel filter=0.000000e+000 result=40 10:05:37 Config A/D Result=40 10:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:37 Get A/D filter: -9.255963e+061 result=40 10:05:37 Get A/D value=-858993460 result=40 10:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:37 Aux= 10:05:37 Message to Camera, serial 270956 queued 10:06:14 Received message from Master: op=PointingHead serial=270969 10:06:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:06:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:06:14 Point started: ret=0 10:06:14 point_skyscan result=0 10:06:15 Check angles 10:06:15 SkyScan query 10:06:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 10:06:15 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 10:06:15 Check angles 10:06:15 SkyScan query 10:06:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:06:16 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:06:16 Message to Master queued w/err=0: serial=270969 error=0 10:06:21 Received message from Master: op=Filter serial=270970 10:06:21 Color wheel filter change from 0 to 0 10:06:21 FLIGetFilterPos err=0 currentPosition=0 10:06:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:21 Filter is already there-color wheel unchanged 10:06:21 Received message from Master: op=Shutter serial=270971 10:06:21 Shutter LASER open 10:06:21 Received message from Camera: op=State serial=270973 10:06:21 GetSingleValue result=40 Value=cccccccc 10:06:21 SkyScan query 10:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:06:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:22 Parameters OK 10:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:22 Set A/D data flow result=40 10:06:22 Set A/D channel type result=40 10:06:22 Set A/D encoding result=40 10:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:22 Set channel filter=0.000000e+000 result=40 10:06:22 Config A/D Result=40 10:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:22 Get A/D filter: -9.255963e+061 result=40 10:06:22 Get A/D value=-858993460 result=40 10:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:22 Parameters OK 10:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:22 Set A/D data flow result=40 10:06:22 Set A/D channel type result=40 10:06:22 Set A/D encoding result=40 10:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:22 Set channel filter=0.000000e+000 result=40 10:06:22 Config A/D Result=40 10:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:22 Get A/D filter: -9.255963e+061 result=40 10:06:22 Get A/D value=-858993460 result=40 10:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:22 Aux= 10:06:22 Message to Camera, serial 270973 queued 10:06:30 Received message from Master: op=Shutter serial=270983 10:06:30 Shutter LASER close 10:06:31 Received message from Master: op=PointingHead serial=270987 10:06:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:06:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:06:31 Point started: ret=0 10:06:31 point_skyscan result=0 10:06:32 Check angles 10:06:32 SkyScan query 10:06:33 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.28<-21552 Statuses=0009 0009 10:06:33 Msec=0 True Az=135.915 Ze=-143.28 Az status=0009 Ze status=0009 10:06:33 Check angles 10:06:33 SkyScan query 10:06:33 SkyScan query done: ret=0 az=153.465<-10231 ze=-122.325<-20155 Statuses=0009 0009 10:06:33 Msec=750 True Az=153.465 Ze=-122.325 Az status=0009 Ze status=0009 10:06:34 Check angles 10:06:34 SkyScan query 10:06:34 SkyScan query done: ret=0 az=170.94<-11396 ze=-101.43<-18762 Statuses=0009 0009 10:06:34 Msec=1500 True Az=170.94 Ze=-101.43 Az status=0009 Ze status=0009 10:06:34 Check angles 10:06:34 SkyScan query 10:06:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.445<-17363 Statuses=0008 0009 10:06:35 Msec=2250 True Az=176.01 Ze=-80.445 Az status=0008 Ze status=0009 10:06:35 Check angles 10:06:35 SkyScan query 10:06:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.49<-15966 Statuses=0008 0009 10:06:36 Msec=3000 True Az=176.01 Ze=-59.49 Az status=0008 Ze status=0009 10:06:36 Check angles 10:06:36 SkyScan query 10:06:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 10:06:36 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 10:06:36 Message to Master queued w/err=0: serial=270987 error=0 10:06:41 Received message from Master: op=Filter serial=270988 10:06:41 Color wheel filter change from 0 to 0 10:06:41 FLIGetFilterPos err=0 currentPosition=0 10:06:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:41 Filter is already there-color wheel unchanged 10:06:42 Received message from Master: op=Shutter serial=270989 10:06:42 Shutter LASER close 10:06:42 Received message from Camera: op=State serial=270991 10:06:42 GetSingleValue result=40 Value=cccccccc 10:06:42 SkyScan query 10:06:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:06:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:42 Parameters OK 10:06:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:42 Set A/D data flow result=40 10:06:42 Set A/D channel type result=40 10:06:42 Set A/D encoding result=40 10:06:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:42 Set channel filter=0.000000e+000 result=40 10:06:42 Config A/D Result=40 10:06:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:42 Get A/D filter: -9.255963e+061 result=40 10:06:42 Get A/D value=-858993460 result=40 10:06:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:42 Parameters OK 10:06:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:42 Set A/D data flow result=40 10:06:42 Set A/D channel type result=40 10:06:42 Set A/D encoding result=40 10:06:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:42 Set channel filter=0.000000e+000 result=40 10:06:42 Config A/D Result=40 10:06:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:42 Get A/D filter: -9.255963e+061 result=40 10:06:42 Get A/D value=-858993460 result=40 10:06:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:42 Aux= 10:06:42 Message to Camera, serial 270991 queued 10:07:19 Received message from Master: op=PointingHead serial=271004 10:07:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:07:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:07:19 Point started: ret=0 10:07:19 point_skyscan result=0 10:07:20 Check angles 10:07:20 SkyScan query 10:07:21 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.54<-13436 Statuses=0009 0009 10:07:21 Msec=0 True Az=152.76 Ze=-21.54 Az status=0009 Ze status=0009 10:07:21 Check angles 10:07:21 SkyScan query 10:07:22 SkyScan query done: ret=0 az=134.91<-8994 ze=-0.165<-12011 Statuses=0009 0009 10:07:22 Msec=750 True Az=134.91 Ze=-0.165 Az status=0009 Ze status=0009 10:07:22 Check angles 10:07:22 SkyScan query 10:07:22 SkyScan query done: ret=0 az=117.12<-7808 ze=21.27<-10582 Statuses=0009 0009 10:07:22 Msec=1500 True Az=117.12 Ze=21.27 Az status=0009 Ze status=0009 10:07:23 Check angles 10:07:23 SkyScan query 10:07:23 SkyScan query done: ret=0 az=99.69<-6646 ze=42.165<-9189 Statuses=0009 0009 10:07:23 Msec=2250 True Az=99.69 Ze=42.165 Az status=0009 Ze status=0009 10:07:23 Check angles 10:07:23 SkyScan query 10:07:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:07:24 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:07:24 Check angles 10:07:24 SkyScan query 10:07:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:07:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:07:25 Message to Master queued w/err=0: serial=271004 error=0 10:07:30 Received message from Master: op=Filter serial=271005 10:07:30 Color wheel filter change from 0 to 0 10:07:30 FLIGetFilterPos err=0 currentPosition=0 10:07:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:30 Filter is already there-color wheel unchanged 10:07:30 Received message from Master: op=Shutter serial=271006 10:07:30 Shutter LASER close 10:07:30 Received message from Camera: op=State serial=271008 10:07:30 GetSingleValue result=40 Value=cccccccc 10:07:30 SkyScan query 10:07:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:07:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:30 Parameters OK 10:07:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:30 Set A/D data flow result=40 10:07:30 Set A/D channel type result=40 10:07:30 Set A/D encoding result=40 10:07:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:30 Set channel filter=0.000000e+000 result=40 10:07:30 Config A/D Result=40 10:07:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:30 Get A/D filter: -9.255963e+061 result=40 10:07:30 Get A/D value=-858993460 result=40 10:07:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:30 Parameters OK 10:07:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:30 Set A/D data flow result=40 10:07:30 Set A/D channel type result=40 10:07:30 Set A/D encoding result=40 10:07:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:30 Set channel filter=0.000000e+000 result=40 10:07:30 Config A/D Result=40 10:07:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:30 Get A/D filter: -9.255963e+061 result=40 10:07:30 Get A/D value=-858993460 result=40 10:07:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:30 Aux= 10:07:30 Message to Camera, serial 271008 queued 10:08:07 Received message from Master: op=PointingHead serial=271021 10:08:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:08:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:08:08 Point started: ret=0 10:08:08 point_skyscan result=0 10:08:08 Check angles 10:08:08 SkyScan query 10:08:09 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 10:08:09 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 10:08:09 Check angles 10:08:09 SkyScan query 10:08:10 SkyScan query done: ret=0 az=126.855<-8457 ze=38.505<-9433 Statuses=0009 0008 10:08:10 Msec=750 True Az=126.855 Ze=38.505 Az status=0009 Ze status=0008 10:08:10 Check angles 10:08:10 SkyScan query 10:08:10 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 10:08:10 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 10:08:11 Check angles 10:08:11 SkyScan query 10:08:11 SkyScan query done: ret=0 az=162.15<-10810 ze=38.505<-9433 Statuses=0009 0008 10:08:11 Msec=2250 True Az=162.15 Ze=38.505 Az status=0009 Ze status=0008 10:08:11 Check angles 10:08:11 SkyScan query 10:08:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:08:12 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:08:12 Check angles 10:08:12 SkyScan query 10:08:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:08:13 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:08:13 Message to Master queued w/err=0: serial=271021 error=0 10:08:18 Received message from Master: op=Filter serial=271022 10:08:18 Color wheel filter change from 0 to 0 10:08:18 FLIGetFilterPos err=0 currentPosition=0 10:08:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:18 Filter is already there-color wheel unchanged 10:08:18 Received message from Master: op=Shutter serial=271023 10:08:18 Shutter LASER close 10:08:18 Received message from Camera: op=State serial=271025 10:08:18 GetSingleValue result=40 Value=cccccccc 10:08:18 SkyScan query 10:08:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:08:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:18 Parameters OK 10:08:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:18 Set A/D data flow result=40 10:08:18 Set A/D channel type result=40 10:08:18 Set A/D encoding result=40 10:08:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:18 Set channel filter=0.000000e+000 result=40 10:08:18 Config A/D Result=40 10:08:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:18 Get A/D filter: -9.255963e+061 result=40 10:08:18 Get A/D value=-858993460 result=40 10:08:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:18 Parameters OK 10:08:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:18 Set A/D data flow result=40 10:08:18 Set A/D channel type result=40 10:08:18 Set A/D encoding result=40 10:08:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:18 Set channel filter=0.000000e+000 result=40 10:08:18 Config A/D Result=40 10:08:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:18 Get A/D filter: -9.255963e+061 result=40 10:08:18 Get A/D value=-858993460 result=40 10:08:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:18 Aux= 10:08:18 Message to Camera, serial 271025 queued 10:08:56 Received message from Master: op=PointingHead serial=271038 10:08:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:08:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:08:56 Point started: ret=0 10:08:56 point_skyscan result=0 10:08:57 Check angles 10:08:57 SkyScan query 10:08:57 SkyScan query done: ret=0 az=152.595<-10173 ze=68.85<-7410 Statuses=0009 0009 10:08:57 Msec=0 True Az=152.595 Ze=68.85 Az status=0009 Ze status=0009 10:08:57 Check angles 10:08:57 SkyScan query 10:08:58 SkyScan query done: ret=0 az=135.03<-9002 ze=89.85<-6010 Statuses=0009 0009 10:08:58 Msec=750 True Az=135.03 Ze=89.85 Az status=0009 Ze status=0009 10:08:58 Check angles 10:08:58 SkyScan query 10:08:59 SkyScan query done: ret=0 az=117.615<-7841 ze=110.745<-4617 Statuses=0009 0009 10:08:59 Msec=1500 True Az=117.615 Ze=110.745 Az status=0009 Ze status=0009 10:08:59 Check angles 10:08:59 SkyScan query 10:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=131.745<-3217 Statuses=0008 0009 10:08:59 Msec=2250 True Az=112.995 Ze=131.745 Az status=0008 Ze status=0009 10:09:00 Check angles 10:09:00 SkyScan query 10:09:00 SkyScan query done: ret=0 az=112.995<-7533 ze=152.7<-1820 Statuses=0008 0009 10:09:00 Msec=3000 True Az=112.995 Ze=152.7 Az status=0008 Ze status=0009 10:09:00 Check angles 10:09:00 SkyScan query 10:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=173.655<-423 Statuses=0008 0009 10:09:01 Msec=3750 True Az=112.995 Ze=173.655 Az status=0008 Ze status=0009 10:09:01 Check angles 10:09:01 SkyScan query 10:09:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 10:09:02 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 10:09:02 Message to Master queued w/err=0: serial=271038 error=0 10:09:07 Received message from Master: op=Filter serial=271039 10:09:07 Color wheel filter change from 0 to 0 10:09:07 FLIGetFilterPos err=0 currentPosition=0 10:09:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:07 Filter is already there-color wheel unchanged 10:09:07 Received message from Master: op=Shutter serial=271040 10:09:07 Shutter LASER open 10:09:07 Received message from Camera: op=State serial=271042 10:09:07 GetSingleValue result=40 Value=cccccccc 10:09:07 SkyScan query 10:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:09:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:08 Parameters OK 10:09:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:08 Set A/D data flow result=40 10:09:08 Set A/D channel type result=40 10:09:08 Set A/D encoding result=40 10:09:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:08 Set channel filter=0.000000e+000 result=40 10:09:08 Config A/D Result=40 10:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:08 Get A/D filter: -9.255963e+061 result=40 10:09:08 Get A/D value=-858993460 result=40 10:09:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:08 Parameters OK 10:09:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:08 Set A/D data flow result=40 10:09:08 Set A/D channel type result=40 10:09:08 Set A/D encoding result=40 10:09:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:08 Set channel filter=0.000000e+000 result=40 10:09:08 Config A/D Result=40 10:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:08 Get A/D filter: -9.255963e+061 result=40 10:09:08 Get A/D value=-858993460 result=40 10:09:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:08 Aux= 10:09:08 Message to Camera, serial 271042 queued 10:09:16 Received message from Master: op=Shutter serial=271052 10:09:16 Shutter LASER close 10:09:17 Received message from Master: op=PointingHead serial=271056 10:09:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:09:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:09:17 Point started: ret=0 10:09:17 point_skyscan result=0 10:09:18 Check angles 10:09:18 SkyScan query 10:09:18 SkyScan query done: ret=0 az=89.655<-5977 ze=157.035<-1531 Statuses=0009 0009 10:09:18 Msec=0 True Az=89.655 Ze=157.035 Az status=0009 Ze status=0009 10:09:18 Check angles 10:09:18 SkyScan query 10:09:19 SkyScan query done: ret=0 az=72.27<-4818 ze=136.065<-2929 Statuses=0009 0009 10:09:19 Msec=750 True Az=72.27 Ze=136.065 Az status=0009 Ze status=0009 10:09:19 Check angles 10:09:19 SkyScan query 10:09:20 SkyScan query done: ret=0 az=54.81<-3654 ze=115.155<-4323 Statuses=0009 0009 10:09:20 Msec=1500 True Az=54.81 Ze=115.155 Az status=0009 Ze status=0009 10:09:20 Check angles 10:09:20 SkyScan query 10:09:20 SkyScan query done: ret=0 az=40.98<-2732 ze=94.125<-5725 Statuses=0009 0009 10:09:20 Msec=2250 True Az=40.98 Ze=94.125 Az status=0009 Ze status=0009 10:09:21 Check angles 10:09:21 SkyScan query 10:09:21 SkyScan query done: ret=0 az=40.995<-2733 ze=73.215<-7119 Statuses=0008 0009 10:09:21 Msec=3000 True Az=40.995 Ze=73.215 Az status=0008 Ze status=0009 10:09:21 Check angles 10:09:21 SkyScan query 10:09:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 10:09:22 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 10:09:22 Check angles 10:09:22 SkyScan query 10:09:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:09:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:09:23 Message to Master queued w/err=0: serial=271056 error=0 10:09:28 Received message from Master: op=Filter serial=271057 10:09:28 Color wheel filter change from 0 to 0 10:09:28 FLIGetFilterPos err=0 currentPosition=0 10:09:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:28 Filter is already there-color wheel unchanged 10:09:28 Received message from Master: op=Shutter serial=271058 10:09:28 Shutter LASER close 10:09:28 Received message from Camera: op=State serial=271060 10:09:28 GetSingleValue result=40 Value=cccccccc 10:09:28 SkyScan query 10:09:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:09:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:29 Parameters OK 10:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:29 Set A/D data flow result=40 10:09:29 Set A/D channel type result=40 10:09:29 Set A/D encoding result=40 10:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:29 Set channel filter=0.000000e+000 result=40 10:09:29 Config A/D Result=40 10:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:29 Get A/D filter: -9.255963e+061 result=40 10:09:29 Get A/D value=-858993460 result=40 10:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:29 Parameters OK 10:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:29 Set A/D data flow result=40 10:09:29 Set A/D channel type result=40 10:09:29 Set A/D encoding result=40 10:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:29 Set channel filter=0.000000e+000 result=40 10:09:29 Config A/D Result=40 10:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:29 Get A/D filter: -9.255963e+061 result=40 10:09:29 Get A/D value=-858993460 result=40 10:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:29 Aux= 10:09:29 Message to Camera, serial 271060 queued 10:10:05 Received message from Master: op=PointingHead serial=271073 10:10:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:10:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:10:06 Point started: ret=0 10:10:06 point_skyscan result=0 10:10:07 Check angles 10:10:07 SkyScan query 10:10:07 SkyScan query done: ret=0 az=64.035<-4269 ze=66.555<-7563 Statuses=0009 0008 10:10:07 Msec=0 True Az=64.035 Ze=66.555 Az status=0009 Ze status=0008 10:10:07 Check angles 10:10:07 SkyScan query 10:10:08 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 10:10:08 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 10:10:08 Check angles 10:10:08 SkyScan query 10:10:09 SkyScan query done: ret=0 az=98.925<-6595 ze=66.495<-7567 Statuses=0009 0008 10:10:09 Msec=1500 True Az=98.925 Ze=66.495 Az status=0009 Ze status=0008 10:10:09 Check angles 10:10:09 SkyScan query 10:10:09 SkyScan query done: ret=0 az=116.505<-7767 ze=66.495<-7567 Statuses=0009 0008 10:10:09 Msec=2250 True Az=116.505 Ze=66.495 Az status=0009 Ze status=0008 10:10:10 Check angles 10:10:10 SkyScan query 10:10:10 SkyScan query done: ret=0 az=133.92<-8928 ze=66.495<-7567 Statuses=0009 0008 10:10:10 Msec=3000 True Az=133.92 Ze=66.495 Az status=0009 Ze status=0008 10:10:10 Check angles 10:10:10 SkyScan query 10:10:11 SkyScan query done: ret=0 az=151.335<-10089 ze=66.495<-7567 Statuses=0009 0008 10:10:11 Msec=3750 True Az=151.335 Ze=66.495 Az status=0009 Ze status=0008 10:10:11 Check angles 10:10:11 SkyScan query 10:10:12 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:10:12 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:10:12 Message to Master queued w/err=0: serial=271073 error=0 10:10:17 Received message from Master: op=Filter serial=271074 10:10:17 Color wheel filter change from 0 to 0 10:10:17 FLIGetFilterPos err=0 currentPosition=0 10:10:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:17 Filter is already there-color wheel unchanged 10:10:17 Received message from Master: op=Shutter serial=271075 10:10:17 Shutter LASER close 10:10:17 Received message from Camera: op=State serial=271077 10:10:17 GetSingleValue result=40 Value=cccccccc 10:10:17 SkyScan query 10:10:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:10:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:17 Parameters OK 10:10:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:17 Set A/D data flow result=40 10:10:17 Set A/D channel type result=40 10:10:17 Set A/D encoding result=40 10:10:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:17 Set channel filter=0.000000e+000 result=40 10:10:17 Config A/D Result=40 10:10:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:17 Get A/D filter: -9.255963e+061 result=40 10:10:17 Get A/D value=-858993460 result=40 10:10:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:17 Parameters OK 10:10:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:17 Set A/D data flow result=40 10:10:17 Set A/D channel type result=40 10:10:17 Set A/D encoding result=40 10:10:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:17 Set channel filter=0.000000e+000 result=40 10:10:17 Config A/D Result=40 10:10:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:17 Get A/D filter: -9.255963e+061 result=40 10:10:17 Get A/D value=-858993460 result=40 10:10:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:17 Aux= 10:10:17 Message to Camera, serial 271077 queued 10:10:54 Received message from Master: op=PointingHead serial=271090 10:10:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:10:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:10:55 Point started: ret=0 10:10:55 point_skyscan result=0 10:10:55 Check angles 10:10:55 SkyScan query 10:10:56 SkyScan query done: ret=0 az=134.76<-8984 ze=96.585<-5561 Statuses=0009 0009 10:10:56 Msec=0 True Az=134.76 Ze=96.585 Az status=0009 Ze status=0009 10:10:56 Check angles 10:10:56 SkyScan query 10:10:57 SkyScan query done: ret=0 az=130.995<-8733 ze=117.93<-4138 Statuses=0008 0009 10:10:57 Msec=750 True Az=130.995 Ze=117.93 Az status=0008 Ze status=0009 10:10:57 Check angles 10:10:57 SkyScan query 10:10:58 SkyScan query done: ret=0 az=130.995<-8733 ze=138.885<-2741 Statuses=0008 0009 10:10:58 Msec=1500 True Az=130.995 Ze=138.885 Az status=0008 Ze status=0009 10:10:58 Check angles 10:10:58 SkyScan query 10:10:58 SkyScan query done: ret=0 az=130.995<-8733 ze=159.855<-1343 Statuses=0008 0009 10:10:58 Msec=2250 True Az=130.995 Ze=159.855 Az status=0008 Ze status=0009 10:10:59 Check angles 10:10:59 SkyScan query 10:10:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.755<-23917 Statuses=0008 0009 10:10:59 Msec=3000 True Az=130.995 Ze=-178.755 Az status=0008 Ze status=0009 10:10:59 Check angles 10:10:59 SkyScan query 10:11:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.395<-22493 Statuses=0008 0009 10:11:00 Msec=3750 True Az=130.995 Ze=-157.395 Az status=0008 Ze status=0009 10:11:00 Check angles 10:11:00 SkyScan query 10:11:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 10:11:01 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 10:11:01 Check angles 10:11:01 SkyScan query 10:11:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 10:11:01 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 10:11:01 Message to Master queued w/err=0: serial=271090 error=0 10:11:06 Received message from Master: op=Filter serial=271091 10:11:06 Color wheel filter change from 0 to 0 10:11:06 FLIGetFilterPos err=0 currentPosition=0 10:11:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:06 Filter is already there-color wheel unchanged 10:11:07 Received message from Master: op=Shutter serial=271092 10:11:07 Shutter LASER close 10:11:07 Received message from Camera: op=State serial=271094 10:11:07 GetSingleValue result=40 Value=cccccccc 10:11:07 SkyScan query 10:11:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:11:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:07 Parameters OK 10:11:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:07 Set A/D data flow result=40 10:11:07 Set A/D channel type result=40 10:11:07 Set A/D encoding result=40 10:11:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:07 Set channel filter=0.000000e+000 result=40 10:11:07 Config A/D Result=40 10:11:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:07 Get A/D filter: -9.255963e+061 result=40 10:11:07 Get A/D value=-858993460 result=40 10:11:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:07 Parameters OK 10:11:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:07 Set A/D data flow result=40 10:11:07 Set A/D channel type result=40 10:11:07 Set A/D encoding result=40 10:11:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:07 Set channel filter=0.000000e+000 result=40 10:11:07 Config A/D Result=40 10:11:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:07 Get A/D filter: -9.255963e+061 result=40 10:11:07 Get A/D value=-858993460 result=40 10:11:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:07 Aux= 10:11:07 Message to Camera, serial 271094 queued 10:11:44 Received message from Master: op=PointingHead serial=271107 10:11:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:11:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:11:44 Point started: ret=0 10:11:44 point_skyscan result=0 10:11:45 Check angles 10:11:45 SkyScan query 10:11:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 10:11:46 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 10:11:46 Check angles 10:11:46 SkyScan query 10:11:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:11:46 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:11:46 Message to Master queued w/err=0: serial=271107 error=0 10:11:51 Received message from Master: op=Filter serial=271108 10:11:51 Color wheel filter change from 0 to 0 10:11:51 FLIGetFilterPos err=0 currentPosition=0 10:11:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:51 Filter is already there-color wheel unchanged 10:11:52 Received message from Master: op=Shutter serial=271109 10:11:52 Shutter LASER open 10:11:52 Received message from Camera: op=State serial=271111 10:11:52 GetSingleValue result=40 Value=cccccccc 10:11:52 SkyScan query 10:11:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:11:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:52 Parameters OK 10:11:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:52 Set A/D data flow result=40 10:11:52 Set A/D channel type result=40 10:11:52 Set A/D encoding result=40 10:11:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:52 Set channel filter=0.000000e+000 result=40 10:11:52 Config A/D Result=40 10:11:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:52 Get A/D filter: -9.255963e+061 result=40 10:11:52 Get A/D value=-858993460 result=40 10:11:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:52 Parameters OK 10:11:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:52 Set A/D data flow result=40 10:11:52 Set A/D channel type result=40 10:11:52 Set A/D encoding result=40 10:11:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:52 Set channel filter=0.000000e+000 result=40 10:11:52 Config A/D Result=40 10:11:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:52 Get A/D filter: -9.255963e+061 result=40 10:11:52 Get A/D value=-858993460 result=40 10:11:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:52 Aux= 10:11:52 Message to Camera, serial 271111 queued 10:12:01 Received message from Master: op=Shutter serial=271121 10:12:01 Shutter LASER close 10:12:01 Received message from Master: op=PointingHead serial=271125 10:12:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:12:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:12:02 Point started: ret=0 10:12:02 point_skyscan result=0 10:12:02 Check angles 10:12:02 SkyScan query 10:12:03 SkyScan query done: ret=0 az=136.29<-9086 ze=-142.83<-21522 Statuses=0009 0009 10:12:03 Msec=0 True Az=136.29 Ze=-142.83 Az status=0009 Ze status=0009 10:12:03 Check angles 10:12:03 SkyScan query 10:12:04 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.92<-20128 Statuses=0009 0009 10:12:04 Msec=750 True Az=153.765 Ze=-121.92 Az status=0009 Ze status=0009 10:12:04 Check angles 10:12:04 SkyScan query 10:12:05 SkyScan query done: ret=0 az=171.33<-11422 ze=-100.905<-18727 Statuses=0009 0009 10:12:05 Msec=1500 True Az=171.33 Ze=-100.905 Az status=0009 Ze status=0009 10:12:05 Check angles 10:12:05 SkyScan query 10:12:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.53<-17302 Statuses=0008 0009 10:12:05 Msec=2250 True Az=176.01 Ze=-79.53 Az status=0008 Ze status=0009 10:12:05 Check angles 10:12:05 SkyScan query 10:12:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.53<-15902 Statuses=0008 0009 10:12:06 Msec=3000 True Az=176.01 Ze=-58.53 Az status=0008 Ze status=0009 10:12:06 Check angles 10:12:06 SkyScan query 10:12:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 10:12:07 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 10:12:07 Message to Master queued w/err=0: serial=271125 error=0 10:12:12 Received message from Master: op=Filter serial=271126 10:12:12 Color wheel filter change from 0 to 0 10:12:12 FLIGetFilterPos err=0 currentPosition=0 10:12:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:12 Filter is already there-color wheel unchanged 10:12:12 Received message from Master: op=Shutter serial=271127 10:12:12 Shutter LASER close 10:12:12 Received message from Camera: op=State serial=271129 10:12:12 GetSingleValue result=40 Value=cccccccc 10:12:12 SkyScan query 10:12:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:12:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:13 Parameters OK 10:12:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:13 Set A/D data flow result=40 10:12:13 Set A/D channel type result=40 10:12:13 Set A/D encoding result=40 10:12:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:13 Set channel filter=0.000000e+000 result=40 10:12:13 Config A/D Result=40 10:12:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:13 Get A/D filter: -9.255963e+061 result=40 10:12:13 Get A/D value=-858993460 result=40 10:12:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:13 Parameters OK 10:12:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:13 Set A/D data flow result=40 10:12:13 Set A/D channel type result=40 10:12:13 Set A/D encoding result=40 10:12:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:13 Set channel filter=0.000000e+000 result=40 10:12:13 Config A/D Result=40 10:12:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:13 Get A/D filter: -9.255963e+061 result=40 10:12:13 Get A/D value=-858993460 result=40 10:12:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:13 Aux= 10:12:13 Message to Camera, serial 271129 queued 10:12:50 Received message from Master: op=PointingHead serial=271142 10:12:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:12:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:12:50 Point started: ret=0 10:12:50 point_skyscan result=0 10:12:51 Check angles 10:12:51 SkyScan query 10:12:51 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.035<-13469 Statuses=0009 0009 10:12:51 Msec=0 True Az=153.21 Ze=-22.035 Az status=0009 Ze status=0009 10:12:51 Check angles 10:12:51 SkyScan query 10:12:52 SkyScan query done: ret=0 az=135.855<-9057 ze=-1.05<-12070 Statuses=0009 0009 10:12:52 Msec=750 True Az=135.855 Ze=-1.05 Az status=0009 Ze status=0009 10:12:52 Check angles 10:12:52 SkyScan query 10:12:53 SkyScan query done: ret=0 az=117.855<-7857 ze=20.325<-10645 Statuses=0009 0009 10:12:53 Msec=1500 True Az=117.855 Ze=20.325 Az status=0009 Ze status=0009 10:12:53 Check angles 10:12:53 SkyScan query 10:12:54 SkyScan query done: ret=0 az=100.185<-6679 ze=41.715<-9219 Statuses=0009 0009 10:12:54 Msec=2250 True Az=100.185 Ze=41.715 Az status=0009 Ze status=0009 10:12:54 Check angles 10:12:54 SkyScan query 10:12:54 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 10:12:54 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 10:12:55 Check angles 10:12:55 SkyScan query 10:12:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:12:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:12:55 Message to Master queued w/err=0: serial=271142 error=0 10:13:00 Received message from Master: op=Filter serial=271143 10:13:00 Color wheel filter change from 0 to 0 10:13:00 FLIGetFilterPos err=0 currentPosition=0 10:13:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:00 Filter is already there-color wheel unchanged 10:13:00 Received message from Master: op=Shutter serial=271144 10:13:00 Shutter LASER close 10:13:00 Received message from Camera: op=State serial=271146 10:13:00 GetSingleValue result=40 Value=cccccccc 10:13:00 SkyScan query 10:13:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:13:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:01 Parameters OK 10:13:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:01 Set A/D data flow result=40 10:13:01 Set A/D channel type result=40 10:13:01 Set A/D encoding result=40 10:13:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:01 Set channel filter=0.000000e+000 result=40 10:13:01 Config A/D Result=40 10:13:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:01 Get A/D filter: -9.255963e+061 result=40 10:13:01 Get A/D value=-858993460 result=40 10:13:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:01 Parameters OK 10:13:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:01 Set A/D data flow result=40 10:13:01 Set A/D channel type result=40 10:13:01 Set A/D encoding result=40 10:13:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:01 Set channel filter=0.000000e+000 result=40 10:13:01 Config A/D Result=40 10:13:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:01 Get A/D filter: -9.255963e+061 result=40 10:13:01 Get A/D value=-858993460 result=40 10:13:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:01 Aux= 10:13:01 Message to Camera, serial 271146 queued 10:13:38 Received message from Master: op=PointingHead serial=271159 10:13:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:13:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:13:38 Point started: ret=0 10:13:38 point_skyscan result=0 10:13:39 Check angles 10:13:39 SkyScan query 10:13:39 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 10:13:39 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 10:13:40 Check angles 10:13:40 SkyScan query 10:13:40 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 10:13:40 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 10:13:40 Check angles 10:13:40 SkyScan query 10:13:41 SkyScan query done: ret=0 az=144.6<-9640 ze=38.505<-9433 Statuses=0009 0008 10:13:41 Msec=1500 True Az=144.6 Ze=38.505 Az status=0009 Ze status=0008 10:13:41 Check angles 10:13:41 SkyScan query 10:13:42 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 10:13:42 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 10:13:42 Check angles 10:13:42 SkyScan query 10:13:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:13:42 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:13:43 Check angles 10:13:43 SkyScan query 10:13:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:13:43 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:13:43 Message to Master queued w/err=0: serial=271159 error=0 10:13:48 Received message from Master: op=Filter serial=271160 10:13:48 Color wheel filter change from 0 to 0 10:13:48 FLIGetFilterPos err=0 currentPosition=0 10:13:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:48 Filter is already there-color wheel unchanged 10:13:48 Received message from Master: op=Shutter serial=271161 10:13:48 Shutter LASER close 10:13:48 Received message from Camera: op=State serial=271163 10:13:48 GetSingleValue result=40 Value=cccccccc 10:13:48 SkyScan query 10:13:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:13:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:49 Parameters OK 10:13:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:49 Set A/D data flow result=40 10:13:49 Set A/D channel type result=40 10:13:49 Set A/D encoding result=40 10:13:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:49 Set channel filter=0.000000e+000 result=40 10:13:49 Config A/D Result=40 10:13:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:49 Get A/D filter: -9.255963e+061 result=40 10:13:49 Get A/D value=-858993460 result=40 10:13:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:49 Parameters OK 10:13:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:49 Set A/D data flow result=40 10:13:49 Set A/D channel type result=40 10:13:49 Set A/D encoding result=40 10:13:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:49 Set channel filter=0.000000e+000 result=40 10:13:49 Config A/D Result=40 10:13:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:49 Get A/D filter: -9.255963e+061 result=40 10:13:49 Get A/D value=-858993460 result=40 10:13:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:49 Aux= 10:13:49 Message to Camera, serial 271163 queued 10:14:26 Received message from Master: op=PointingHead serial=271176 10:14:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:14:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:14:26 Point started: ret=0 10:14:26 point_skyscan result=0 10:14:27 Check angles 10:14:27 SkyScan query 10:14:28 SkyScan query done: ret=0 az=153.3<-10220 ze=68.025<-7465 Statuses=0009 0009 10:14:28 Msec=0 True Az=153.3 Ze=68.025 Az status=0009 Ze status=0009 10:14:28 Check angles 10:14:28 SkyScan query 10:14:28 SkyScan query done: ret=0 az=135.855<-9057 ze=89.01<-6066 Statuses=0009 0009 10:14:28 Msec=750 True Az=135.855 Ze=89.01 Az status=0009 Ze status=0009 10:14:29 Check angles 10:14:29 SkyScan query 10:14:29 SkyScan query done: ret=0 az=118.29<-7886 ze=109.95<-4670 Statuses=0009 0009 10:14:29 Msec=1500 True Az=118.29 Ze=109.95 Az status=0009 Ze status=0009 10:14:29 Check angles 10:14:29 SkyScan query 10:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=131.34<-3244 Statuses=0008 0009 10:14:30 Msec=2250 True Az=112.995 Ze=131.34 Az status=0008 Ze status=0009 10:14:30 Check angles 10:14:30 SkyScan query 10:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=152.235<-1851 Statuses=0008 0009 10:14:31 Msec=3000 True Az=112.995 Ze=152.235 Az status=0008 Ze status=0009 10:14:31 Check angles 10:14:31 SkyScan query 10:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=173.22<-452 Statuses=0008 0009 10:14:31 Msec=3750 True Az=112.995 Ze=173.22 Az status=0008 Ze status=0009 10:14:32 Check angles 10:14:32 SkyScan query 10:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.92<-23528 Statuses=0008 0008 10:14:32 Msec=4500 True Az=112.995 Ze=-172.92 Az status=0008 Ze status=0008 10:14:32 Message to Master queued w/err=0: serial=271176 error=0 10:14:37 Received message from Master: op=Filter serial=271177 10:14:37 Color wheel filter change from 0 to 0 10:14:37 FLIGetFilterPos err=0 currentPosition=0 10:14:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:37 Filter is already there-color wheel unchanged 10:14:37 Received message from Master: op=Shutter serial=271178 10:14:37 Shutter LASER open 10:14:37 Received message from Camera: op=State serial=271180 10:14:37 GetSingleValue result=40 Value=cccccccc 10:14:37 SkyScan query 10:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:14:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:38 Parameters OK 10:14:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:38 Set A/D data flow result=40 10:14:38 Set A/D channel type result=40 10:14:38 Set A/D encoding result=40 10:14:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:38 Set channel filter=0.000000e+000 result=40 10:14:38 Config A/D Result=40 10:14:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:38 Get A/D filter: -9.255963e+061 result=40 10:14:38 Get A/D value=-858993460 result=40 10:14:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:38 Parameters OK 10:14:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:38 Set A/D data flow result=40 10:14:38 Set A/D channel type result=40 10:14:38 Set A/D encoding result=40 10:14:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:38 Set channel filter=0.000000e+000 result=40 10:14:38 Config A/D Result=40 10:14:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:38 Get A/D filter: -9.255963e+061 result=40 10:14:38 Get A/D value=-858993460 result=40 10:14:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:38 Aux= 10:14:38 Message to Camera, serial 271180 queued 10:14:46 Received message from Master: op=Shutter serial=271190 10:14:46 Shutter LASER close 10:14:47 Received message from Master: op=PointingHead serial=271194 10:14:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:14:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:14:47 Point started: ret=0 10:14:47 point_skyscan result=0 10:14:48 Check angles 10:14:48 SkyScan query 10:14:49 SkyScan query done: ret=0 az=89.685<-5979 ze=156.93<-1538 Statuses=0009 0009 10:14:49 Msec=0 True Az=89.685 Ze=156.93 Az status=0009 Ze status=0009 10:14:49 Check angles 10:14:49 SkyScan query 10:14:49 SkyScan query done: ret=0 az=72.12<-4808 ze=135.96<-2936 Statuses=0009 0009 10:14:49 Msec=750 True Az=72.12 Ze=135.96 Az status=0009 Ze status=0009 10:14:50 Check angles 10:14:50 SkyScan query 10:14:50 SkyScan query done: ret=0 az=54.78<-3652 ze=115.02<-4332 Statuses=0009 0009 10:14:50 Msec=1500 True Az=54.78 Ze=115.02 Az status=0009 Ze status=0009 10:14:50 Check angles 10:14:50 SkyScan query 10:14:51 SkyScan query done: ret=0 az=40.98<-2732 ze=94.005<-5733 Statuses=0009 0009 10:14:51 Msec=2250 True Az=40.98 Ze=94.005 Az status=0009 Ze status=0009 10:14:51 Check angles 10:14:51 SkyScan query 10:14:52 SkyScan query done: ret=0 az=40.995<-2733 ze=73.065<-7129 Statuses=0008 0009 10:14:52 Msec=3000 True Az=40.995 Ze=73.065 Az status=0008 Ze status=0009 10:14:52 Check angles 10:14:52 SkyScan query 10:14:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.635<-8491 Statuses=0008 0009 10:14:52 Msec=3750 True Az=40.995 Ze=52.635 Az status=0008 Ze status=0009 10:14:53 Check angles 10:14:53 SkyScan query 10:14:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:14:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:14:53 Message to Master queued w/err=0: serial=271194 error=0 10:14:58 Received message from Master: op=Filter serial=271195 10:14:58 Color wheel filter change from 0 to 0 10:14:58 FLIGetFilterPos err=0 currentPosition=0 10:14:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:58 Filter is already there-color wheel unchanged 10:14:58 Received message from Master: op=Shutter serial=271196 10:14:58 Shutter LASER close 10:14:58 Received message from Camera: op=State serial=271198 10:14:58 GetSingleValue result=40 Value=cccccccc 10:14:58 SkyScan query 10:14:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:14:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:59 Parameters OK 10:14:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:59 Set A/D data flow result=40 10:14:59 Set A/D channel type result=40 10:14:59 Set A/D encoding result=40 [UTC 2018-12-19 10:14:59] 10:14:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:59 Set channel filter=0.000000e+000 result=40 10:14:59 Config A/D Result=40 10:14:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:59 Get A/D filter: -9.255963e+061 result=40 10:14:59 Get A/D value=-858993460 result=40 10:14:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:59 Parameters OK 10:14:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:59 Set A/D data flow result=40 10:14:59 Set A/D channel type result=40 10:14:59 Set A/D encoding result=40 10:14:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:59 Set channel filter=0.000000e+000 result=40 10:14:59 Config A/D Result=40 10:14:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:59 Get A/D filter: -9.255963e+061 result=40 10:14:59 Get A/D value=-858993460 result=40 10:14:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:59 Aux= 10:14:59 Message to Camera, serial 271198 queued 10:15:27 Received message from Master: op=Identify serial=271199 10:15:36 Received message from Master: op=PointingHead serial=271214 10:15:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:15:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:15:36 Point started: ret=0 10:15:36 point_skyscan result=0 10:15:37 Check angles 10:15:37 SkyScan query 10:15:38 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 10:15:38 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 10:15:38 Check angles 10:15:38 SkyScan query 10:15:38 SkyScan query done: ret=0 az=81.885<-5459 ze=66.495<-7567 Statuses=0009 0008 10:15:38 Msec=750 True Az=81.885 Ze=66.495 Az status=0009 Ze status=0008 10:15:38 Check angles 10:15:38 SkyScan query 10:15:39 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 10:15:39 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 10:15:39 Check angles 10:15:39 SkyScan query 10:15:40 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 10:15:40 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 10:15:40 Check angles 10:15:40 SkyScan query 10:15:41 SkyScan query done: ret=0 az=134.52<-8968 ze=66.495<-7567 Statuses=0009 0008 10:15:41 Msec=3000 True Az=134.52 Ze=66.495 Az status=0009 Ze status=0008 10:15:41 Check angles 10:15:41 SkyScan query 10:15:41 SkyScan query done: ret=0 az=152.055<-10137 ze=66.495<-7567 Statuses=0009 0008 10:15:41 Msec=3750 True Az=152.055 Ze=66.495 Az status=0009 Ze status=0008 10:15:41 Check angles 10:15:41 SkyScan query 10:15:42 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:15:42 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:15:42 Message to Master queued w/err=0: serial=271214 error=0 10:15:47 Received message from Master: op=Filter serial=271215 10:15:47 Color wheel filter change from 0 to 0 10:15:47 FLIGetFilterPos err=0 currentPosition=0 10:15:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:47 Filter is already there-color wheel unchanged 10:15:47 Received message from Master: op=Shutter serial=271216 10:15:47 Shutter LASER close 10:15:47 Received message from Camera: op=State serial=271218 10:15:47 GetSingleValue result=40 Value=cccccccc 10:15:47 SkyScan query 10:15:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:15:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:48 Parameters OK 10:15:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:48 Set A/D data flow result=40 10:15:48 Set A/D channel type result=40 10:15:48 Set A/D encoding result=40 10:15:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:48 Set channel filter=0.000000e+000 result=40 10:15:48 Config A/D Result=40 10:15:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:48 Get A/D filter: -9.255963e+061 result=40 10:15:48 Get A/D value=-858993460 result=40 10:15:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:48 Parameters OK 10:15:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:48 Set A/D data flow result=40 10:15:48 Set A/D channel type result=40 10:15:48 Set A/D encoding result=40 10:15:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:48 Set channel filter=0.000000e+000 result=40 10:15:48 Config A/D Result=40 10:15:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:48 Get A/D filter: -9.255963e+061 result=40 10:15:48 Get A/D value=-858993460 result=40 10:15:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:48 Aux= 10:15:48 Message to Camera, serial 271218 queued [UTC 2018-12-19 10:15:52] 10:16:25 Received message from Master: op=PointingHead serial=271231 10:16:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:16:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:16:25 Point started: ret=0 10:16:25 point_skyscan result=0 10:16:26 Check angles 10:16:26 SkyScan query 10:16:26 SkyScan query done: ret=0 az=134.835<-8989 ze=96.435<-5571 Statuses=0009 0009 10:16:26 Msec=0 True Az=134.835 Ze=96.435 Az status=0009 Ze status=0009 10:16:27 Check angles 10:16:27 SkyScan query 10:16:27 SkyScan query done: ret=0 az=130.995<-8733 ze=117.78<-4148 Statuses=0008 0009 10:16:27 Msec=750 True Az=130.995 Ze=117.78 Az status=0008 Ze status=0009 10:16:27 Check angles 10:16:27 SkyScan query 10:16:28 SkyScan query done: ret=0 az=130.995<-8733 ze=138.75<-2750 Statuses=0008 0009 10:16:28 Msec=1500 True Az=130.995 Ze=138.75 Az status=0008 Ze status=0009 10:16:28 Check angles 10:16:28 SkyScan query 10:16:29 SkyScan query done: ret=0 az=130.995<-8733 ze=159.735<-1351 Statuses=0008 0009 10:16:29 Msec=2250 True Az=130.995 Ze=159.735 Az status=0008 Ze status=0009 10:16:29 Check angles 10:16:29 SkyScan query 10:16:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.325<-23955 Statuses=0008 0009 10:16:30 Msec=3000 True Az=130.995 Ze=-179.325 Az status=0008 Ze status=0009 10:16:30 Check angles 10:16:30 SkyScan query 10:16:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.355<-22557 Statuses=0008 0009 10:16:30 Msec=3750 True Az=130.995 Ze=-158.355 Az status=0008 Ze status=0009 10:16:30 Check angles 10:16:30 SkyScan query 10:16:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.39<-21426 Statuses=0008 0009 10:16:31 Msec=4500 True Az=130.995 Ze=-141.39 Az status=0008 Ze status=0009 10:16:31 Check angles 10:16:31 SkyScan query 10:16:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 10:16:32 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 10:16:32 Message to Master queued w/err=0: serial=271231 error=0 10:16:37 Received message from Master: op=Filter serial=271232 10:16:37 Color wheel filter change from 0 to 0 10:16:37 FLIGetFilterPos err=0 currentPosition=0 10:16:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:37 Filter is already there-color wheel unchanged 10:16:37 Received message from Master: op=Shutter serial=271233 10:16:37 Shutter LASER close 10:16:37 Received message from Camera: op=State serial=271235 10:16:37 GetSingleValue result=40 Value=cccccccc 10:16:37 SkyScan query 10:16:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:16:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:38 Parameters OK 10:16:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:38 Set A/D data flow result=40 10:16:38 Set A/D channel type result=40 10:16:38 Set A/D encoding result=40 10:16:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:38 Set channel filter=0.000000e+000 result=40 10:16:38 Config A/D Result=40 10:16:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:38 Get A/D filter: -9.255963e+061 result=40 10:16:38 Get A/D value=-858993460 result=40 10:16:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:38 Parameters OK 10:16:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:38 Set A/D data flow result=40 10:16:38 Set A/D channel type result=40 10:16:38 Set A/D encoding result=40 10:16:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:38 Set channel filter=0.000000e+000 result=40 10:16:38 Config A/D Result=40 10:16:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:38 Get A/D filter: -9.255963e+061 result=40 10:16:38 Get A/D value=-858993460 result=40 10:16:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:38 Aux= 10:16:38 Message to Camera, serial 271235 queued 10:17:14 Received message from Master: op=PointingHead serial=271248 10:17:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:17:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:17:15 Point started: ret=0 10:17:15 point_skyscan result=0 10:17:15 Check angles 10:17:15 SkyScan query 10:17:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 10:17:16 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 10:17:16 Check angles 10:17:16 SkyScan query 10:17:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:17:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:17:17 Message to Master queued w/err=0: serial=271248 error=0 10:17:22 Received message from Master: op=Filter serial=271249 10:17:22 Color wheel filter change from 0 to 0 10:17:22 FLIGetFilterPos err=0 currentPosition=0 10:17:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:22 Filter is already there-color wheel unchanged 10:17:22 Received message from Master: op=Shutter serial=271250 10:17:22 Shutter LASER open 10:17:22 Received message from Camera: op=State serial=271252 10:17:22 GetSingleValue result=40 Value=cccccccc 10:17:22 SkyScan query 10:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:17:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:23 Parameters OK 10:17:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:23 Set A/D data flow result=40 10:17:23 Set A/D channel type result=40 10:17:23 Set A/D encoding result=40 10:17:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:23 Set channel filter=0.000000e+000 result=40 10:17:23 Config A/D Result=40 10:17:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:23 Get A/D filter: -9.255963e+061 result=40 10:17:23 Get A/D value=-858993460 result=40 10:17:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:23 Parameters OK 10:17:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:23 Set A/D data flow result=40 10:17:23 Set A/D channel type result=40 10:17:23 Set A/D encoding result=40 10:17:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:23 Set channel filter=0.000000e+000 result=40 10:17:23 Config A/D Result=40 10:17:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:23 Get A/D filter: -9.255963e+061 result=40 10:17:23 Get A/D value=-858993460 result=40 10:17:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:23 Aux= 10:17:23 Message to Camera, serial 271252 queued 10:17:30 Received message from Master: op=Shutter serial=271261 10:17:30 Shutter LASER close 10:17:31 Received message from Master: op=PointingHead serial=271265 10:17:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:17:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:17:31 Point started: ret=0 10:17:31 point_skyscan result=0 10:17:32 Check angles 10:17:32 SkyScan query 10:17:33 SkyScan query done: ret=0 az=136.335<-9089 ze=-142.905<-21527 Statuses=0009 0009 10:17:33 Msec=0 True Az=136.335 Ze=-142.905 Az status=0009 Ze status=0009 10:17:33 Check angles 10:17:33 SkyScan query 10:17:33 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.95<-20130 Statuses=0009 0009 10:17:33 Msec=750 True Az=153.75 Ze=-121.95 Az status=0009 Ze status=0009 10:17:34 Check angles 10:17:34 SkyScan query 10:17:34 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.98<-18732 Statuses=0009 0009 10:17:34 Msec=1500 True Az=171.225 Ze=-100.98 Az status=0009 Ze status=0009 10:17:34 Check angles 10:17:34 SkyScan query 10:17:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.055<-17337 Statuses=0008 0009 10:17:35 Msec=2250 True Az=176.01 Ze=-80.055 Az status=0008 Ze status=0009 10:17:35 Check angles 10:17:35 SkyScan query 10:17:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.07<-15938 Statuses=0008 0009 10:17:36 Msec=3000 True Az=176.01 Ze=-59.07 Az status=0008 Ze status=0009 10:17:36 Check angles 10:17:36 SkyScan query 10:17:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:17:36 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:17:36 Message to Master queued w/err=0: serial=271265 error=0 10:17:41 Received message from Master: op=Filter serial=271266 10:17:41 Color wheel filter change from 0 to 0 10:17:41 FLIGetFilterPos err=0 currentPosition=0 10:17:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:41 Filter is already there-color wheel unchanged 10:17:42 Received message from Master: op=Shutter serial=271267 10:17:42 Shutter LASER close 10:17:42 Received message from Camera: op=State serial=271269 10:17:42 GetSingleValue result=40 Value=cccccccc 10:17:42 SkyScan query 10:17:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:17:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:42 Parameters OK 10:17:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:42 Set A/D data flow result=40 10:17:42 Set A/D channel type result=40 10:17:42 Set A/D encoding result=40 10:17:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:42 Set channel filter=0.000000e+000 result=40 10:17:42 Config A/D Result=40 10:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:42 Get A/D filter: -9.255963e+061 result=40 10:17:42 Get A/D value=-858993460 result=40 10:17:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:42 Parameters OK 10:17:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:42 Set A/D data flow result=40 10:17:42 Set A/D channel type result=40 10:17:42 Set A/D encoding result=40 10:17:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:42 Set channel filter=0.000000e+000 result=40 10:17:42 Config A/D Result=40 10:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:42 Get A/D filter: -9.255963e+061 result=40 10:17:42 Get A/D value=-858993460 result=40 10:17:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:42 Aux= 10:17:42 Message to Camera, serial 271269 queued 10:18:19 Received message from Master: op=PointingHead serial=271282 10:18:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:18:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:18:19 Point started: ret=0 10:18:19 point_skyscan result=0 10:18:20 Check angles 10:18:20 SkyScan query 10:18:21 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.05<-13470 Statuses=0009 0009 10:18:21 Msec=0 True Az=153.21 Ze=-22.05 Az status=0009 Ze status=0009 10:18:21 Check angles 10:18:21 SkyScan query 10:18:22 SkyScan query done: ret=0 az=135.84<-9056 ze=-1.08<-12072 Statuses=0009 0009 10:18:22 Msec=750 True Az=135.84 Ze=-1.08 Az status=0009 Ze status=0009 10:18:22 Check angles 10:18:22 SkyScan query 10:18:22 SkyScan query done: ret=0 az=118.275<-7885 ze=19.86<-10676 Statuses=0009 0009 10:18:22 Msec=1500 True Az=118.275 Ze=19.86 Az status=0009 Ze status=0009 10:18:22 Check angles 10:18:22 SkyScan query 10:18:23 SkyScan query done: ret=0 az=100.86<-6724 ze=40.845<-9277 Statuses=0009 0009 10:18:23 Msec=2250 True Az=100.86 Ze=40.845 Az status=0009 Ze status=0009 10:18:23 Check angles 10:18:23 SkyScan query 10:18:24 SkyScan query done: ret=0 az=85.965<-5731 ze=51.57<-8562 Statuses=0009 0008 10:18:24 Msec=3000 True Az=85.965 Ze=51.57 Az status=0009 Ze status=0008 10:18:24 Check angles 10:18:24 SkyScan query 10:18:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:18:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:18:25 Message to Master queued w/err=0: serial=271282 error=0 10:18:30 Received message from Master: op=Filter serial=271283 10:18:30 Color wheel filter change from 0 to 0 10:18:30 FLIGetFilterPos err=0 currentPosition=0 10:18:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:30 Filter is already there-color wheel unchanged 10:18:30 Received message from Master: op=Shutter serial=271284 10:18:30 Shutter LASER close 10:18:30 Received message from Camera: op=State serial=271286 10:18:30 GetSingleValue result=40 Value=cccccccc 10:18:30 SkyScan query 10:18:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:18:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:30 Parameters OK 10:18:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:30 Set A/D data flow result=40 10:18:30 Set A/D channel type result=40 10:18:30 Set A/D encoding result=40 10:18:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:30 Set channel filter=0.000000e+000 result=40 10:18:30 Config A/D Result=40 10:18:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:30 Get A/D filter: -9.255963e+061 result=40 10:18:30 Get A/D value=-858993460 result=40 10:18:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:30 Parameters OK 10:18:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:30 Set A/D data flow result=40 10:18:30 Set A/D channel type result=40 10:18:30 Set A/D encoding result=40 10:18:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:30 Set channel filter=0.000000e+000 result=40 10:18:30 Config A/D Result=40 10:18:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:30 Get A/D filter: -9.255963e+061 result=40 10:18:30 Get A/D value=-858993460 result=40 10:18:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:30 Aux= 10:18:30 Message to Camera, serial 271286 queued 10:19:07 Received message from Master: op=PointingHead serial=271299 10:19:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:19:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:19:07 Point started: ret=0 10:19:07 point_skyscan result=0 10:19:08 Check angles 10:19:08 SkyScan query 10:19:09 SkyScan query done: ret=0 az=108.945<-7263 ze=38.475<-9435 Statuses=0009 0008 10:19:09 Msec=0 True Az=108.945 Ze=38.475 Az status=0009 Ze status=0008 10:19:09 Check angles 10:19:09 SkyScan query 10:19:10 SkyScan query done: ret=0 az=126.45<-8430 ze=38.505<-9433 Statuses=0009 0008 10:19:10 Msec=750 True Az=126.45 Ze=38.505 Az status=0009 Ze status=0008 10:19:10 Check angles 10:19:10 SkyScan query 10:19:10 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 10:19:10 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 10:19:10 Check angles 10:19:10 SkyScan query 10:19:11 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 10:19:11 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 10:19:11 Check angles 10:19:11 SkyScan query 10:19:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:19:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:19:12 Check angles 10:19:12 SkyScan query 10:19:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:19:13 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:19:13 Message to Master queued w/err=0: serial=271299 error=0 10:19:18 Received message from Master: op=Filter serial=271300 10:19:18 Color wheel filter change from 0 to 0 10:19:18 FLIGetFilterPos err=0 currentPosition=0 10:19:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:18 Filter is already there-color wheel unchanged 10:19:18 Received message from Master: op=Shutter serial=271301 10:19:18 Shutter LASER close 10:19:18 Received message from Camera: op=State serial=271303 10:19:18 GetSingleValue result=40 Value=cccccccc 10:19:18 SkyScan query 10:19:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:19:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:18 Parameters OK 10:19:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:18 Set A/D data flow result=40 10:19:18 Set A/D channel type result=40 10:19:18 Set A/D encoding result=40 10:19:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:18 Set channel filter=0.000000e+000 result=40 10:19:18 Config A/D Result=40 10:19:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:18 Get A/D filter: -9.255963e+061 result=40 10:19:18 Get A/D value=-858993460 result=40 10:19:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:18 Parameters OK 10:19:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:18 Set A/D data flow result=40 10:19:18 Set A/D channel type result=40 10:19:18 Set A/D encoding result=40 10:19:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:18 Set channel filter=0.000000e+000 result=40 10:19:18 Config A/D Result=40 10:19:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:18 Get A/D filter: -9.255963e+061 result=40 10:19:18 Get A/D value=-858993460 result=40 10:19:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:18 Aux= 10:19:18 Message to Camera, serial 271303 queued 10:19:55 Received message from Master: op=PointingHead serial=271316 10:19:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:19:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:19:56 Point started: ret=0 10:19:56 point_skyscan result=0 10:19:56 Check angles 10:19:56 SkyScan query 10:19:57 SkyScan query done: ret=0 az=152.73<-10182 ze=68.7<-7420 Statuses=0009 0009 10:19:57 Msec=0 True Az=152.73 Ze=68.7 Az status=0009 Ze status=0009 10:19:57 Check angles 10:19:57 SkyScan query 10:19:58 SkyScan query done: ret=0 az=134.79<-8986 ze=90.105<-5993 Statuses=0009 0009 10:19:58 Msec=750 True Az=134.79 Ze=90.105 Az status=0009 Ze status=0009 10:19:58 Check angles 10:19:58 SkyScan query 10:19:59 SkyScan query done: ret=0 az=117.405<-7827 ze=111.06<-4596 Statuses=0009 0009 10:19:59 Msec=1500 True Az=117.405 Ze=111.06 Az status=0009 Ze status=0009 10:19:59 Check angles 10:19:59 SkyScan query 10:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=131.985<-3201 Statuses=0008 0009 10:19:59 Msec=2250 True Az=112.995 Ze=131.985 Az status=0008 Ze status=0009 10:19:59 Check angles 10:19:59 SkyScan query 10:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=153<-1800 Statuses=0008 0009 10:20:00 Msec=3000 True Az=112.995 Ze=153 Az status=0008 Ze status=0009 10:20:00 Check angles 10:20:00 SkyScan query 10:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=173.94<-404 Statuses=0008 0009 10:20:01 Msec=3750 True Az=112.995 Ze=173.94 Az status=0008 Ze status=0009 10:20:01 Check angles 10:20:01 SkyScan query 10:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 10:20:02 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 10:20:02 Message to Master queued w/err=0: serial=271316 error=0 10:20:07 Received message from Master: op=Filter serial=271317 10:20:07 Color wheel filter change from 0 to 0 10:20:07 FLIGetFilterPos err=0 currentPosition=0 10:20:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:07 Filter is already there-color wheel unchanged 10:20:07 Received message from Master: op=Shutter serial=271318 10:20:07 Shutter LASER open 10:20:07 Received message from Camera: op=State serial=271320 10:20:07 GetSingleValue result=40 Value=cccccccc 10:20:07 SkyScan query 10:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:07 Parameters OK 10:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:07 Set A/D data flow result=40 10:20:07 Set A/D channel type result=40 10:20:07 Set A/D encoding result=40 10:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:07 Set channel filter=0.000000e+000 result=40 10:20:07 Config A/D Result=40 10:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:07 Get A/D filter: -9.255963e+061 result=40 10:20:07 Get A/D value=-858993460 result=40 10:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:07 Parameters OK 10:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:07 Set A/D data flow result=40 10:20:07 Set A/D channel type result=40 10:20:07 Set A/D encoding result=40 10:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:07 Set channel filter=0.000000e+000 result=40 10:20:07 Config A/D Result=40 10:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:07 Get A/D filter: -9.255963e+061 result=40 10:20:07 Get A/D value=-858993460 result=40 10:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:07 Aux= 10:20:07 Message to Camera, serial 271320 queued 10:20:16 Received message from Master: op=Shutter serial=271330 10:20:16 Shutter LASER close 10:20:16 Received message from Master: op=PointingHead serial=271334 10:20:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:20:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:20:17 Point started: ret=0 10:20:17 point_skyscan result=0 10:20:17 Check angles 10:20:17 SkyScan query 10:20:18 SkyScan query done: ret=0 az=89.67<-5978 ze=157.05<-1530 Statuses=0009 0009 10:20:18 Msec=0 True Az=89.67 Ze=157.05 Az status=0009 Ze status=0009 10:20:18 Check angles 10:20:18 SkyScan query 10:20:19 SkyScan query done: ret=0 az=72.33<-4822 ze=136.08<-2928 Statuses=0009 0009 10:20:19 Msec=750 True Az=72.33 Ze=136.08 Az status=0009 Ze status=0009 10:20:19 Check angles 10:20:19 SkyScan query 10:20:19 SkyScan query done: ret=0 az=54.81<-3654 ze=115.17<-4322 Statuses=0009 0009 10:20:19 Msec=1500 True Az=54.81 Ze=115.17 Az status=0009 Ze status=0009 10:20:20 Check angles 10:20:20 SkyScan query 10:20:20 SkyScan query done: ret=0 az=40.98<-2732 ze=94.14<-5724 Statuses=0009 0009 10:20:20 Msec=2250 True Az=40.98 Ze=94.14 Az status=0009 Ze status=0009 10:20:20 Check angles 10:20:20 SkyScan query 10:20:21 SkyScan query done: ret=0 az=40.995<-2733 ze=73.215<-7119 Statuses=0008 0009 10:20:21 Msec=3000 True Az=40.995 Ze=73.215 Az status=0008 Ze status=0009 10:20:21 Check angles 10:20:21 SkyScan query 10:20:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 10:20:22 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 10:20:22 Check angles 10:20:22 SkyScan query 10:20:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:20:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:20:22 Message to Master queued w/err=0: serial=271334 error=0 10:20:27 Received message from Master: op=Filter serial=271335 10:20:27 Color wheel filter change from 0 to 0 10:20:27 FLIGetFilterPos err=0 currentPosition=0 10:20:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:27 Filter is already there-color wheel unchanged 10:20:28 Received message from Master: op=Shutter serial=271336 10:20:28 Shutter LASER close 10:20:28 Received message from Camera: op=State serial=271338 10:20:28 GetSingleValue result=40 Value=cccccccc 10:20:28 SkyScan query 10:20:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:20:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:28 Parameters OK 10:20:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:28 Set A/D data flow result=40 10:20:28 Set A/D channel type result=40 10:20:28 Set A/D encoding result=40 10:20:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:28 Set channel filter=0.000000e+000 result=40 10:20:28 Config A/D Result=40 10:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:28 Get A/D filter: -9.255963e+061 result=40 10:20:28 Get A/D value=-858993460 result=40 10:20:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:28 Parameters OK 10:20:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:28 Set A/D data flow result=40 10:20:28 Set A/D channel type result=40 10:20:28 Set A/D encoding result=40 10:20:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:28 Set channel filter=0.000000e+000 result=40 10:20:28 Config A/D Result=40 10:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:28 Get A/D filter: -9.255963e+061 result=40 10:20:28 Get A/D value=-858993460 result=40 10:20:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:28 Aux= 10:20:28 Message to Camera, serial 271338 queued 10:21:05 Received message from Master: op=PointingHead serial=271351 10:21:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:21:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:21:06 Point started: ret=0 10:21:06 point_skyscan result=0 10:21:06 Check angles 10:21:06 SkyScan query 10:21:07 SkyScan query done: ret=0 az=64.035<-4269 ze=66.57<-7562 Statuses=0009 0008 10:21:07 Msec=0 True Az=64.035 Ze=66.57 Az status=0009 Ze status=0008 10:21:07 Check angles 10:21:07 SkyScan query 10:21:08 SkyScan query done: ret=0 az=81.84<-5456 ze=66.51<-7566 Statuses=0009 0008 10:21:08 Msec=750 True Az=81.84 Ze=66.51 Az status=0009 Ze status=0008 10:21:08 Check angles 10:21:08 SkyScan query 10:21:08 SkyScan query done: ret=0 az=99.78<-6652 ze=66.51<-7566 Statuses=0009 0008 10:21:08 Msec=1500 True Az=99.78 Ze=66.51 Az status=0009 Ze status=0008 10:21:09 Check angles 10:21:09 SkyScan query 10:21:09 SkyScan query done: ret=0 az=117.225<-7815 ze=66.51<-7566 Statuses=0009 0008 10:21:09 Msec=2250 True Az=117.225 Ze=66.51 Az status=0009 Ze status=0008 10:21:09 Check angles 10:21:09 SkyScan query 10:21:10 SkyScan query done: ret=0 az=135.105<-9007 ze=66.51<-7566 Statuses=0009 0008 10:21:10 Msec=3000 True Az=135.105 Ze=66.51 Az status=0009 Ze status=0008 10:21:10 Check angles 10:21:10 SkyScan query 10:21:11 SkyScan query done: ret=0 az=152.46<-10164 ze=66.51<-7566 Statuses=0009 0008 10:21:11 Msec=3750 True Az=152.46 Ze=66.51 Az status=0009 Ze status=0008 10:21:11 Check angles 10:21:11 SkyScan query 10:21:11 SkyScan query done: ret=0 az=158.025<-10535 ze=66.51<-7566 Statuses=0008 0008 10:21:11 Msec=4500 True Az=158.025 Ze=66.51 Az status=0008 Ze status=0008 10:21:11 Message to Master queued w/err=0: serial=271351 error=0 10:21:16 Received message from Master: op=Filter serial=271352 10:21:16 Color wheel filter change from 0 to 0 10:21:16 FLIGetFilterPos err=0 currentPosition=0 10:21:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:16 Filter is already there-color wheel unchanged 10:21:17 Received message from Master: op=Shutter serial=271353 10:21:17 Shutter LASER close 10:21:17 Received message from Camera: op=State serial=271355 10:21:17 GetSingleValue result=40 Value=cccccccc 10:21:17 SkyScan query 10:21:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 10:21:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:17 Parameters OK 10:21:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:17 Set A/D data flow result=40 10:21:17 Set A/D channel type result=40 10:21:17 Set A/D encoding result=40 10:21:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:17 Set channel filter=0.000000e+000 result=40 10:21:17 Config A/D Result=40 10:21:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:17 Get A/D filter: -9.255963e+061 result=40 10:21:17 Get A/D value=-858993460 result=40 10:21:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:17 Parameters OK 10:21:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:17 Set A/D data flow result=40 10:21:17 Set A/D channel type result=40 10:21:17 Set A/D encoding result=40 10:21:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:17 Set channel filter=0.000000e+000 result=40 10:21:17 Config A/D Result=40 10:21:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:17 Get A/D filter: -9.255963e+061 result=40 10:21:17 Get A/D value=-858993460 result=40 10:21:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:17 Aux= 10:21:17 Message to Camera, serial 271355 queued 10:21:53 Received message from Master: op=PointingHead serial=271367 10:21:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:21:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:21:54 Point started: ret=0 10:21:54 point_skyscan result=0 10:21:54 Check angles 10:21:54 SkyScan query 10:21:55 SkyScan query done: ret=0 az=134.835<-8989 ze=96.375<-5575 Statuses=0009 0009 10:21:55 Msec=0 True Az=134.835 Ze=96.375 Az status=0009 Ze status=0009 10:21:55 Check angles 10:21:55 SkyScan query 10:21:56 SkyScan query done: ret=0 az=130.995<-8733 ze=117.285<-4181 Statuses=0008 0009 10:21:56 Msec=750 True Az=130.995 Ze=117.285 Az status=0008 Ze status=0009 10:21:56 Check angles 10:21:56 SkyScan query 10:21:57 SkyScan query done: ret=0 az=130.995<-8733 ze=138.675<-2755 Statuses=0008 0009 10:21:57 Msec=1500 True Az=130.995 Ze=138.675 Az status=0008 Ze status=0009 10:21:57 Check angles 10:21:57 SkyScan query 10:21:57 SkyScan query done: ret=0 az=130.995<-8733 ze=159.63<-1358 Statuses=0008 0009 10:21:57 Msec=2250 True Az=130.995 Ze=159.63 Az status=0008 Ze status=0009 10:21:57 Check angles 10:21:57 SkyScan query 10:21:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.43<-23962 Statuses=0008 0009 10:21:58 Msec=3000 True Az=130.995 Ze=-179.43 Az status=0008 Ze status=0009 10:21:58 Check angles 10:21:58 SkyScan query 10:21:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.415<-22561 Statuses=0008 0009 10:21:59 Msec=3750 True Az=130.995 Ze=-158.415 Az status=0008 Ze status=0009 10:21:59 Check angles 10:21:59 SkyScan query 10:22:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.39<-21426 Statuses=0008 0009 10:22:00 Msec=4500 True Az=130.995 Ze=-141.39 Az status=0008 Ze status=0009 10:22:00 Check angles 10:22:00 SkyScan query 10:22:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 10:22:00 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 10:22:00 Message to Master queued w/err=0: serial=271367 error=0 10:22:05 Received message from Master: op=Filter serial=271368 10:22:05 Color wheel filter change from 0 to 0 10:22:05 FLIGetFilterPos err=0 currentPosition=0 10:22:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:05 Filter is already there-color wheel unchanged 10:22:05 Received message from Master: op=Shutter serial=271369 10:22:05 Shutter LASER close 10:22:05 Received message from Camera: op=State serial=271371 10:22:05 GetSingleValue result=40 Value=cccccccc 10:22:05 SkyScan query 10:22:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:22:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:06 Parameters OK 10:22:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:06 Set A/D data flow result=40 10:22:06 Set A/D channel type result=40 10:22:06 Set A/D encoding result=40 10:22:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:06 Set channel filter=0.000000e+000 result=40 10:22:06 Config A/D Result=40 10:22:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:06 Get A/D filter: -9.255963e+061 result=40 10:22:06 Get A/D value=-858993460 result=40 10:22:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:06 Parameters OK 10:22:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:06 Set A/D data flow result=40 10:22:06 Set A/D channel type result=40 10:22:06 Set A/D encoding result=40 10:22:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:06 Set channel filter=0.000000e+000 result=40 10:22:06 Config A/D Result=40 10:22:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:06 Get A/D filter: -9.255963e+061 result=40 10:22:06 Get A/D value=-858993460 result=40 10:22:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:06 Aux= 10:22:06 Message to Camera, serial 271371 queued 10:22:43 Received message from Master: op=PointingHead serial=271384 10:22:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:22:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:22:43 Point started: ret=0 10:22:43 point_skyscan result=0 10:22:44 Check angles 10:22:44 SkyScan query 10:22:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 10:22:45 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 10:22:45 Check angles 10:22:45 SkyScan query 10:22:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:22:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:22:45 Message to Master queued w/err=0: serial=271384 error=0 10:22:50 Received message from Master: op=Filter serial=271385 10:22:50 Color wheel filter change from 0 to 0 10:22:50 FLIGetFilterPos err=0 currentPosition=0 10:22:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:50 Filter is already there-color wheel unchanged 10:22:50 Received message from Master: op=Shutter serial=271386 10:22:50 Shutter LASER open 10:22:51 Received message from Camera: op=State serial=271388 10:22:51 GetSingleValue result=40 Value=cccccccc 10:22:51 SkyScan query 10:22:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:22:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:51 Parameters OK 10:22:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:51 Set A/D data flow result=40 10:22:51 Set A/D channel type result=40 10:22:51 Set A/D encoding result=40 10:22:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:51 Set channel filter=0.000000e+000 result=40 10:22:51 Config A/D Result=40 10:22:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:51 Get A/D filter: -9.255963e+061 result=40 10:22:51 Get A/D value=-858993460 result=40 10:22:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:51 Parameters OK 10:22:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:51 Set A/D data flow result=40 10:22:51 Set A/D channel type result=40 10:22:51 Set A/D encoding result=40 10:22:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:51 Set channel filter=0.000000e+000 result=40 10:22:51 Config A/D Result=40 10:22:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:51 Get A/D filter: -9.255963e+061 result=40 10:22:51 Get A/D value=-858993460 result=40 10:22:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:51 Aux= 10:22:51 Message to Camera, serial 271388 queued 10:23:00 Received message from Master: op=Shutter serial=271398 10:23:00 Shutter LASER close 10:23:00 Received message from Master: op=PointingHead serial=271402 10:23:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:23:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:23:01 Point started: ret=0 10:23:01 point_skyscan result=0 10:23:01 Check angles 10:23:01 SkyScan query 10:23:02 SkyScan query done: ret=0 az=136.515<-9101 ze=-142.71<-21514 Statuses=0009 0009 10:23:02 Msec=0 True Az=136.515 Ze=-142.71 Az status=0009 Ze status=0009 10:23:02 Check angles 10:23:02 SkyScan query 10:23:03 SkyScan query done: ret=0 az=153.93<-10262 ze=-121.755<-20117 Statuses=0009 0009 10:23:03 Msec=750 True Az=153.93 Ze=-121.755 Az status=0009 Ze status=0009 10:23:03 Check angles 10:23:03 SkyScan query 10:23:03 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.725<-18715 Statuses=0009 0009 10:23:03 Msec=1500 True Az=171.48 Ze=-100.725 Az status=0009 Ze status=0009 10:23:04 Check angles 10:23:04 SkyScan query 10:23:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.335<-17289 Statuses=0008 0009 10:23:04 Msec=2250 True Az=176.01 Ze=-79.335 Az status=0008 Ze status=0009 10:23:04 Check angles 10:23:04 SkyScan query 10:23:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.395<-15893 Statuses=0008 0009 10:23:05 Msec=3000 True Az=176.01 Ze=-58.395 Az status=0008 Ze status=0009 10:23:05 Check angles 10:23:05 SkyScan query 10:23:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:23:06 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:23:06 Message to Master queued w/err=0: serial=271402 error=0 10:23:11 Received message from Master: op=Filter serial=271403 10:23:11 Color wheel filter change from 0 to 0 10:23:11 FLIGetFilterPos err=0 currentPosition=0 10:23:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:11 Filter is already there-color wheel unchanged 10:23:11 Received message from Master: op=Shutter serial=271404 10:23:11 Shutter LASER close 10:23:11 Received message from Camera: op=State serial=271406 10:23:11 GetSingleValue result=40 Value=cccccccc 10:23:11 SkyScan query 10:23:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:23:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:12 Parameters OK 10:23:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:12 Set A/D data flow result=40 10:23:12 Set A/D channel type result=40 10:23:12 Set A/D encoding result=40 10:23:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:12 Set channel filter=0.000000e+000 result=40 10:23:12 Config A/D Result=40 10:23:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:12 Get A/D filter: -9.255963e+061 result=40 10:23:12 Get A/D value=-858993460 result=40 10:23:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:12 Parameters OK 10:23:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:12 Set A/D data flow result=40 10:23:12 Set A/D channel type result=40 10:23:12 Set A/D encoding result=40 10:23:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:12 Set channel filter=0.000000e+000 result=40 10:23:12 Config A/D Result=40 10:23:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:12 Get A/D filter: -9.255963e+061 result=40 10:23:12 Get A/D value=-858993460 result=40 10:23:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:12 Aux= 10:23:12 Message to Camera, serial 271406 queued 10:23:48 Received message from Master: op=PointingHead serial=271419 10:23:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:23:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:23:49 Point started: ret=0 10:23:49 point_skyscan result=0 10:23:50 Check angles 10:23:50 SkyScan query 10:23:50 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.285<-13419 Statuses=0009 0009 10:23:50 Msec=0 True Az=152.73 Ze=-21.285 Az status=0009 Ze status=0009 10:23:50 Check angles 10:23:50 SkyScan query 10:23:51 SkyScan query done: ret=0 az=135.18<-9012 ze=-0.36<-12024 Statuses=0009 0009 10:23:51 Msec=750 True Az=135.18 Ze=-0.36 Az status=0009 Ze status=0009 10:23:51 Check angles 10:23:51 SkyScan query 10:23:52 SkyScan query done: ret=0 az=117.675<-7845 ze=20.61<-10626 Statuses=0009 0009 10:23:52 Msec=1500 True Az=117.675 Ze=20.61 Az status=0009 Ze status=0009 10:23:52 Check angles 10:23:52 SkyScan query 10:23:52 SkyScan query done: ret=0 az=100.29<-6686 ze=41.565<-9229 Statuses=0009 0009 10:23:52 Msec=2250 True Az=100.29 Ze=41.565 Az status=0009 Ze status=0009 10:23:53 Check angles 10:23:53 SkyScan query 10:23:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:23:53 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:23:53 Check angles 10:23:53 SkyScan query 10:23:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:23:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:23:54 Message to Master queued w/err=0: serial=271419 error=0 10:23:59 Received message from Master: op=Filter serial=271420 10:23:59 Color wheel filter change from 0 to 0 10:23:59 FLIGetFilterPos err=0 currentPosition=0 10:23:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:59 Filter is already there-color wheel unchanged 10:23:59 Received message from Master: op=Shutter serial=271421 10:23:59 Shutter LASER close 10:23:59 Received message from Camera: op=State serial=271423 10:23:59 GetSingleValue result=40 Value=cccccccc 10:23:59 SkyScan query 10:24:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:24:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:00 Parameters OK 10:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:00 Set A/D data flow result=40 10:24:00 Set A/D channel type result=40 10:24:00 Set A/D encoding result=40 10:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:00 Set channel filter=0.000000e+000 result=40 10:24:00 Config A/D Result=40 10:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:00 Get A/D filter: -9.255963e+061 result=40 10:24:00 Get A/D value=-858993460 result=40 10:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:00 Parameters OK 10:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:00 Set A/D data flow result=40 10:24:00 Set A/D channel type result=40 10:24:00 Set A/D encoding result=40 10:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:00 Set channel filter=0.000000e+000 result=40 10:24:00 Config A/D Result=40 10:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:00 Get A/D filter: -9.255963e+061 result=40 10:24:00 Get A/D value=-858993460 result=40 10:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:00 Aux= 10:24:00 Message to Camera, serial 271423 queued 10:24:36 Received message from Master: op=PointingHead serial=271435 10:24:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:24:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:24:36 Point started: ret=0 10:24:36 point_skyscan result=0 10:24:37 Check angles 10:24:37 SkyScan query 10:24:37 SkyScan query done: ret=0 az=109.485<-7299 ze=38.49<-9434 Statuses=0009 0008 10:24:37 Msec=0 True Az=109.485 Ze=38.49 Az status=0009 Ze status=0008 10:24:37 Check angles 10:24:37 SkyScan query 10:24:38 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 10:24:38 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 10:24:38 Check angles 10:24:38 SkyScan query 10:24:39 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 10:24:39 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 10:24:39 Check angles 10:24:39 SkyScan query 10:24:40 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 10:24:40 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 10:24:40 Check angles 10:24:40 SkyScan query 10:24:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:24:40 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:24:40 Check angles 10:24:40 SkyScan query 10:24:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:24:41 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:24:41 Message to Master queued w/err=0: serial=271435 error=0 10:24:46 Received message from Master: op=Filter serial=271436 10:24:46 Color wheel filter change from 0 to 0 10:24:46 FLIGetFilterPos err=0 currentPosition=0 10:24:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:46 Filter is already there-color wheel unchanged 10:24:46 Received message from Master: op=Shutter serial=271437 10:24:46 Shutter LASER close 10:24:46 Received message from Camera: op=State serial=271439 10:24:46 GetSingleValue result=40 Value=cccccccc 10:24:46 SkyScan query 10:24:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:24:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:47 Parameters OK 10:24:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:47 Set A/D data flow result=40 10:24:47 Set A/D channel type result=40 10:24:47 Set A/D encoding result=40 10:24:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:47 Set channel filter=0.000000e+000 result=40 10:24:47 Config A/D Result=40 10:24:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:47 Get A/D filter: -9.255963e+061 result=40 10:24:47 Get A/D value=-858993460 result=40 10:24:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:47 Parameters OK 10:24:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:47 Set A/D data flow result=40 10:24:47 Set A/D channel type result=40 10:24:47 Set A/D encoding result=40 10:24:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:47 Set channel filter=0.000000e+000 result=40 10:24:47 Config A/D Result=40 10:24:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:47 Get A/D filter: -9.255963e+061 result=40 10:24:47 Get A/D value=-858993460 result=40 10:24:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:47 Aux= 10:24:47 Message to Camera, serial 271439 queued 10:25:24 Received message from Master: op=PointingHead serial=271452 10:25:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:25:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:25:24 Point started: ret=0 10:25:24 point_skyscan result=0 10:25:25 Check angles 10:25:25 SkyScan query 10:25:25 SkyScan query done: ret=0 az=152.97<-10198 ze=68.37<-7442 Statuses=0009 0009 10:25:25 Msec=0 True Az=152.97 Ze=68.37 Az status=0009 Ze status=0009 10:25:26 Check angles 10:25:26 SkyScan query 10:25:26 SkyScan query done: ret=0 az=135.39<-9026 ze=89.385<-6041 Statuses=0009 0009 10:25:26 Msec=750 True Az=135.39 Ze=89.385 Az status=0009 Ze status=0009 10:25:26 Check angles 10:25:26 SkyScan query 10:25:27 SkyScan query done: ret=0 az=117.975<-7865 ze=110.295<-4647 Statuses=0009 0009 10:25:27 Msec=1500 True Az=117.975 Ze=110.295 Az status=0009 Ze status=0009 10:25:27 Check angles 10:25:27 SkyScan query 10:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=131.25<-3250 Statuses=0008 0009 10:25:28 Msec=2250 True Az=112.995 Ze=131.25 Az status=0008 Ze status=0009 10:25:28 Check angles 10:25:28 SkyScan query 10:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=152.175<-1855 Statuses=0008 0009 10:25:28 Msec=3000 True Az=112.995 Ze=152.175 Az status=0008 Ze status=0009 10:25:29 Check angles 10:25:29 SkyScan query 10:25:29 SkyScan query done: ret=0 az=112.995<-7533 ze=173.145<-457 Statuses=0008 0009 10:25:29 Msec=3750 True Az=112.995 Ze=173.145 Az status=0008 Ze status=0009 10:25:29 Check angles 10:25:29 SkyScan query 10:25:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 10:25:30 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 10:25:30 Message to Master queued w/err=0: serial=271452 error=0 10:25:35 Received message from Master: op=Filter serial=271453 10:25:35 Color wheel filter change from 0 to 0 10:25:35 FLIGetFilterPos err=0 currentPosition=0 10:25:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:35 Filter is already there-color wheel unchanged 10:25:35 Received message from Master: op=Shutter serial=271454 10:25:35 Shutter LASER open 10:25:35 Received message from Camera: op=State serial=271456 10:25:35 GetSingleValue result=40 Value=cccccccc 10:25:35 SkyScan query 10:25:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:25:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:36 Parameters OK 10:25:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:36 Set A/D data flow result=40 10:25:36 Set A/D channel type result=40 10:25:36 Set A/D encoding result=40 10:25:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:36 Set channel filter=0.000000e+000 result=40 10:25:36 Config A/D Result=40 10:25:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:36 Get A/D filter: -9.255963e+061 result=40 10:25:36 Get A/D value=-858993460 result=40 10:25:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:36 Parameters OK 10:25:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:36 Set A/D data flow result=40 10:25:36 Set A/D channel type result=40 10:25:36 Set A/D encoding result=40 10:25:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:36 Set channel filter=0.000000e+000 result=40 10:25:36 Config A/D Result=40 10:25:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:36 Get A/D filter: -9.255963e+061 result=40 10:25:36 Get A/D value=-858993460 result=40 10:25:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:36 Aux= [UTC 2018-12-19 10:25:36] 10:25:36 Message to Camera, serial 271456 queued 10:25:44 Received message from Master: op=Shutter serial=271466 10:25:44 Shutter LASER close 10:25:45 Received message from Master: op=PointingHead serial=271470 10:25:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:25:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:25:45 Point started: ret=0 10:25:45 point_skyscan result=0 10:25:46 Check angles 10:25:46 SkyScan query 10:25:46 SkyScan query done: ret=0 az=90.045<-6003 ze=157.335<-1511 Statuses=0009 0009 10:25:46 Msec=0 True Az=90.045 Ze=157.335 Az status=0009 Ze status=0009 10:25:47 Check angles 10:25:47 SkyScan query 10:25:47 SkyScan query done: ret=0 az=72.135<-4809 ze=135.975<-2935 Statuses=0009 0009 10:25:47 Msec=750 True Az=72.135 Ze=135.975 Az status=0009 Ze status=0009 10:25:47 Check angles 10:25:47 SkyScan query 10:25:48 SkyScan query done: ret=0 az=54.78<-3652 ze=115.035<-4331 Statuses=0009 0009 10:25:48 Msec=1500 True Az=54.78 Ze=115.035 Az status=0009 Ze status=0009 10:25:48 Check angles 10:25:48 SkyScan query 10:25:49 SkyScan query done: ret=0 az=40.98<-2732 ze=94.035<-5731 Statuses=0009 0009 10:25:49 Msec=2250 True Az=40.98 Ze=94.035 Az status=0009 Ze status=0009 10:25:49 Check angles 10:25:49 SkyScan query 10:25:50 SkyScan query done: ret=0 az=40.995<-2733 ze=73.065<-7129 Statuses=0008 0009 10:25:50 Msec=3000 True Az=40.995 Ze=73.065 Az status=0008 Ze status=0009 10:25:50 Check angles 10:25:50 SkyScan query 10:25:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 10:25:50 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 10:25:50 Check angles 10:25:50 SkyScan query 10:25:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:25:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:25:51 Message to Master queued w/err=0: serial=271470 error=0 10:25:56 Received message from Master: op=Filter serial=271471 10:25:56 Color wheel filter change from 0 to 0 10:25:56 FLIGetFilterPos err=0 currentPosition=0 10:25:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:56 Filter is already there-color wheel unchanged 10:25:56 Received message from Master: op=Shutter serial=271472 10:25:56 Shutter LASER close 10:25:56 Received message from Camera: op=State serial=271474 10:25:56 GetSingleValue result=40 Value=cccccccc 10:25:56 SkyScan query 10:25:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:25:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:57 Parameters OK 10:25:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:57 Set A/D data flow result=40 10:25:57 Set A/D channel type result=40 10:25:57 Set A/D encoding result=40 10:25:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:57 Set channel filter=0.000000e+000 result=40 10:25:57 Config A/D Result=40 10:25:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:57 Get A/D filter: -9.255963e+061 result=40 10:25:57 Get A/D value=-858993460 result=40 10:25:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:57 Parameters OK 10:25:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:57 Set A/D data flow result=40 10:25:57 Set A/D channel type result=40 10:25:57 Set A/D encoding result=40 10:25:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:57 Set channel filter=0.000000e+000 result=40 10:25:57 Config A/D Result=40 10:25:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:57 Get A/D filter: -9.255963e+061 result=40 10:25:57 Get A/D value=-858993460 result=40 10:25:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:57 Aux= 10:25:57 Message to Camera, serial 271474 queued 10:26:34 Received message from Master: op=PointingHead serial=271487 10:26:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:26:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:26:34 Point started: ret=0 10:26:34 point_skyscan result=0 10:26:35 Check angles 10:26:35 SkyScan query 10:26:35 SkyScan query done: ret=0 az=64.35<-4290 ze=66.54<-7564 Statuses=0009 0008 10:26:35 Msec=0 True Az=64.35 Ze=66.54 Az status=0009 Ze status=0008 10:26:36 Check angles 10:26:36 SkyScan query 10:26:36 SkyScan query done: ret=0 az=81.765<-5451 ze=66.51<-7566 Statuses=0009 0008 10:26:36 Msec=750 True Az=81.765 Ze=66.51 Az status=0009 Ze status=0008 10:26:36 Check angles 10:26:36 SkyScan query 10:26:37 SkyScan query done: ret=0 az=99.285<-6619 ze=66.495<-7567 Statuses=0009 0008 10:26:37 Msec=1500 True Az=99.285 Ze=66.495 Az status=0009 Ze status=0008 10:26:37 Check angles 10:26:37 SkyScan query 10:26:38 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 10:26:38 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 10:26:38 Check angles 10:26:38 SkyScan query 10:26:38 SkyScan query done: ret=0 az=134.1<-8940 ze=66.495<-7567 Statuses=0009 0008 10:26:38 Msec=3000 True Az=134.1 Ze=66.495 Az status=0009 Ze status=0008 10:26:39 Check angles 10:26:39 SkyScan query 10:26:39 SkyScan query done: ret=0 az=151.545<-10103 ze=66.495<-7567 Statuses=0009 0008 10:26:39 Msec=3750 True Az=151.545 Ze=66.495 Az status=0009 Ze status=0008 10:26:39 Check angles 10:26:39 SkyScan query 10:26:40 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:26:40 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:26:40 Message to Master queued w/err=0: serial=271487 error=0 10:26:45 Received message from Master: op=Filter serial=271488 10:26:45 Color wheel filter change from 0 to 0 10:26:45 FLIGetFilterPos err=0 currentPosition=0 10:26:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:45 Filter is already there-color wheel unchanged 10:26:45 Received message from Master: op=Shutter serial=271489 10:26:45 Shutter LASER close 10:26:45 Received message from Camera: op=State serial=271491 10:26:45 GetSingleValue result=40 Value=cccccccc 10:26:45 SkyScan query 10:26:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:26:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:46 Parameters OK 10:26:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:46 Set A/D data flow result=40 10:26:46 Set A/D channel type result=40 10:26:46 Set A/D encoding result=40 10:26:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:46 Set channel filter=0.000000e+000 result=40 10:26:46 Config A/D Result=40 10:26:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:46 Get A/D filter: -9.255963e+061 result=40 10:26:46 Get A/D value=-858993460 result=40 10:26:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:46 Parameters OK 10:26:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:46 Set A/D data flow result=40 10:26:46 Set A/D channel type result=40 10:26:46 Set A/D encoding result=40 10:26:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:46 Set channel filter=0.000000e+000 result=40 10:26:46 Config A/D Result=40 10:26:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:46 Get A/D filter: -9.255963e+061 result=40 10:26:46 Get A/D value=-858993460 result=40 10:26:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:46 Aux= 10:26:46 Message to Camera, serial 271491 queued 10:27:23 Received message from Master: op=PointingHead serial=271504 10:27:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:27:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:27:23 Point started: ret=0 10:27:23 point_skyscan result=0 10:27:24 Check angles 10:27:24 SkyScan query 10:27:24 SkyScan query done: ret=0 az=134.835<-8989 ze=96.33<-5578 Statuses=0009 0009 10:27:24 Msec=0 True Az=134.835 Ze=96.33 Az status=0009 Ze status=0009 10:27:25 Check angles 10:27:25 SkyScan query 10:27:25 SkyScan query done: ret=0 az=130.995<-8733 ze=117.27<-4182 Statuses=0008 0009 10:27:25 Msec=750 True Az=130.995 Ze=117.27 Az status=0008 Ze status=0009 10:27:25 Check angles 10:27:25 SkyScan query 10:27:26 SkyScan query done: ret=0 az=130.98<-8732 ze=138.225<-2785 Statuses=0008 0009 10:27:26 Msec=1500 True Az=130.98 Ze=138.225 Az status=0008 Ze status=0009 10:27:26 Check angles 10:27:26 SkyScan query 10:27:27 SkyScan query done: ret=0 az=130.995<-8733 ze=159.165<-1389 Statuses=0008 0009 10:27:27 Msec=2250 True Az=130.995 Ze=159.165 Az status=0008 Ze status=0009 10:27:27 Check angles 10:27:27 SkyScan query 10:27:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.88<-23992 Statuses=0008 0009 10:27:27 Msec=3000 True Az=130.995 Ze=-179.88 Az status=0008 Ze status=0009 10:27:28 Check angles 10:27:28 SkyScan query 10:27:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.925<-22595 Statuses=0008 0009 10:27:28 Msec=3750 True Az=130.995 Ze=-158.925 Az status=0008 Ze status=0009 10:27:28 Check angles 10:27:28 SkyScan query 10:27:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 10:27:29 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 10:27:29 Check angles 10:27:29 SkyScan query 10:27:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 10:27:30 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 10:27:30 Message to Master queued w/err=0: serial=271504 error=0 10:27:35 Received message from Master: op=Filter serial=271505 10:27:35 Color wheel filter change from 0 to 0 10:27:35 FLIGetFilterPos err=0 currentPosition=0 10:27:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:35 Filter is already there-color wheel unchanged 10:27:35 Received message from Master: op=Shutter serial=271506 10:27:35 Shutter LASER close 10:27:35 Received message from Camera: op=State serial=271508 10:27:35 GetSingleValue result=40 Value=cccccccc 10:27:35 SkyScan query 10:27:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:27:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:35 Parameters OK 10:27:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:35 Set A/D data flow result=40 10:27:35 Set A/D channel type result=40 10:27:35 Set A/D encoding result=40 10:27:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:35 Set channel filter=0.000000e+000 result=40 10:27:35 Config A/D Result=40 10:27:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:35 Get A/D filter: -9.255963e+061 result=40 10:27:35 Get A/D value=-858993460 result=40 10:27:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:35 Parameters OK 10:27:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:35 Set A/D data flow result=40 10:27:35 Set A/D channel type result=40 10:27:35 Set A/D encoding result=40 10:27:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:35 Set channel filter=0.000000e+000 result=40 10:27:35 Config A/D Result=40 10:27:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:35 Get A/D filter: -9.255963e+061 result=40 10:27:35 Get A/D value=-858993460 result=40 10:27:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:35 Aux= 10:27:35 Message to Camera, serial 271508 queued 10:28:12 Received message from Master: op=PointingHead serial=271521 10:28:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:28:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:28:13 Point started: ret=0 10:28:13 point_skyscan result=0 10:28:13 Check angles 10:28:13 SkyScan query 10:28:14 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 10:28:14 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 10:28:14 Check angles 10:28:14 SkyScan query 10:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:28:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:28:15 Message to Master queued w/err=0: serial=271521 error=0 10:28:20 Received message from Master: op=Filter serial=271522 10:28:20 Color wheel filter change from 0 to 0 10:28:20 FLIGetFilterPos err=0 currentPosition=0 10:28:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:20 Filter is already there-color wheel unchanged 10:28:20 Received message from Master: op=Shutter serial=271523 10:28:20 Shutter LASER open 10:28:20 Received message from Camera: op=State serial=271525 10:28:20 GetSingleValue result=40 Value=cccccccc 10:28:20 SkyScan query 10:28:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:28:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:21 Parameters OK 10:28:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:21 Set A/D data flow result=40 10:28:21 Set A/D channel type result=40 10:28:21 Set A/D encoding result=40 10:28:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:21 Set channel filter=0.000000e+000 result=40 10:28:21 Config A/D Result=40 10:28:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:21 Get A/D filter: -9.255963e+061 result=40 10:28:21 Get A/D value=-858993460 result=40 10:28:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:21 Parameters OK 10:28:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:21 Set A/D data flow result=40 10:28:21 Set A/D channel type result=40 10:28:21 Set A/D encoding result=40 10:28:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:21 Set channel filter=0.000000e+000 result=40 10:28:21 Config A/D Result=40 10:28:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:21 Get A/D filter: -9.255963e+061 result=40 10:28:21 Get A/D value=-858993460 result=40 10:28:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:21 Aux= 10:28:21 Message to Camera, serial 271525 queued 10:28:29 Received message from Master: op=Shutter serial=271535 10:28:29 Shutter LASER close 10:28:30 Received message from Master: op=PointingHead serial=271539 10:28:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:28:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:28:30 Point started: ret=0 10:28:30 point_skyscan result=0 10:28:31 Check angles 10:28:31 SkyScan query 10:28:31 SkyScan query done: ret=0 az=136.125<-9075 ze=-143.205<-21547 Statuses=0009 0009 10:28:31 Msec=0 True Az=136.125 Ze=-143.205 Az status=0009 Ze status=0009 10:28:31 Check angles 10:28:31 SkyScan query 10:28:32 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.25<-20150 Statuses=0009 0009 10:28:32 Msec=750 True Az=153.495 Ze=-122.25 Az status=0009 Ze status=0009 10:28:32 Check angles 10:28:32 SkyScan query 10:28:33 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.815<-18721 Statuses=0009 0009 10:28:33 Msec=1500 True Az=171.405 Ze=-100.815 Az status=0009 Ze status=0009 10:28:33 Check angles 10:28:33 SkyScan query 10:28:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.41<-17294 Statuses=0008 0009 10:28:34 Msec=2250 True Az=176.01 Ze=-79.41 Az status=0008 Ze status=0009 10:28:34 Check angles 10:28:34 SkyScan query 10:28:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 10:28:34 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 10:28:35 Check angles 10:28:35 SkyScan query 10:28:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 10:28:35 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 10:28:35 Message to Master queued w/err=0: serial=271539 error=0 10:28:40 Received message from Master: op=Filter serial=271540 10:28:40 Color wheel filter change from 0 to 0 10:28:40 FLIGetFilterPos err=0 currentPosition=0 10:28:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:40 Filter is already there-color wheel unchanged 10:28:40 Received message from Master: op=Shutter serial=271541 10:28:40 Shutter LASER close 10:28:40 Received message from Camera: op=State serial=271543 10:28:40 GetSingleValue result=40 Value=cccccccc 10:28:40 SkyScan query 10:28:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:28:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:41 Parameters OK 10:28:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:41 Set A/D data flow result=40 10:28:41 Set A/D channel type result=40 10:28:41 Set A/D encoding result=40 10:28:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:41 Set channel filter=0.000000e+000 result=40 10:28:41 Config A/D Result=40 10:28:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:41 Get A/D filter: -9.255963e+061 result=40 10:28:41 Get A/D value=-858993460 result=40 10:28:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:41 Parameters OK 10:28:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:41 Set A/D data flow result=40 10:28:41 Set A/D channel type result=40 10:28:41 Set A/D encoding result=40 10:28:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:41 Set channel filter=0.000000e+000 result=40 10:28:41 Config A/D Result=40 10:28:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:41 Get A/D filter: -9.255963e+061 result=40 10:28:41 Get A/D value=-858993460 result=40 10:28:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:41 Aux= 10:28:41 Message to Camera, serial 271543 queued 10:29:18 Received message from Master: op=PointingHead serial=271556 10:29:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:29:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:29:18 Point started: ret=0 10:29:18 point_skyscan result=0 10:29:19 Check angles 10:29:19 SkyScan query 10:29:20 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.99<-13466 Statuses=0009 0009 10:29:20 Msec=0 True Az=153.18 Ze=-21.99 Az status=0009 Ze status=0009 10:29:20 Check angles 10:29:20 SkyScan query 10:29:20 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.99<-12066 Statuses=0009 0009 10:29:20 Msec=750 True Az=135.705 Ze=-0.99 Az status=0009 Ze status=0009 10:29:20 Check angles 10:29:20 SkyScan query 10:29:21 SkyScan query done: ret=0 az=118.2<-7880 ze=20.16<-10656 Statuses=0009 0009 10:29:21 Msec=1500 True Az=118.2 Ze=20.16 Az status=0009 Ze status=0009 10:29:21 Check angles 10:29:21 SkyScan query 10:29:22 SkyScan query done: ret=0 az=100.785<-6719 ze=40.92<-9272 Statuses=0009 0009 10:29:22 Msec=2250 True Az=100.785 Ze=40.92 Az status=0009 Ze status=0009 10:29:22 Check angles 10:29:22 SkyScan query 10:29:23 SkyScan query done: ret=0 az=85.965<-5731 ze=51.57<-8562 Statuses=0009 0008 10:29:23 Msec=3000 True Az=85.965 Ze=51.57 Az status=0009 Ze status=0008 10:29:23 Check angles 10:29:23 SkyScan query 10:29:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:29:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:29:23 Message to Master queued w/err=0: serial=271556 error=0 10:29:28 Received message from Master: op=Filter serial=271557 10:29:28 Color wheel filter change from 0 to 0 10:29:28 FLIGetFilterPos err=0 currentPosition=0 10:29:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:28 Filter is already there-color wheel unchanged 10:29:28 Received message from Master: op=Shutter serial=271558 10:29:28 Shutter LASER close 10:29:28 Received message from Camera: op=State serial=271560 10:29:28 GetSingleValue result=40 Value=cccccccc 10:29:28 SkyScan query 10:29:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:29:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:29 Parameters OK 10:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:29 Set A/D data flow result=40 10:29:29 Set A/D channel type result=40 10:29:29 Set A/D encoding result=40 10:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:29 Set channel filter=0.000000e+000 result=40 10:29:29 Config A/D Result=40 10:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:29 Get A/D filter: -9.255963e+061 result=40 10:29:29 Get A/D value=-858993460 result=40 10:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:29 Parameters OK 10:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:29 Set A/D data flow result=40 10:29:29 Set A/D channel type result=40 10:29:29 Set A/D encoding result=40 10:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:29 Set channel filter=0.000000e+000 result=40 10:29:29 Config A/D Result=40 10:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:29 Get A/D filter: -9.255963e+061 result=40 10:29:29 Get A/D value=-858993460 result=40 10:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:29 Aux= 10:29:29 Message to Camera, serial 271560 queued 10:30:06 Received message from Master: op=PointingHead serial=271573 10:30:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:30:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:30:06 Point started: ret=0 10:30:06 point_skyscan result=0 10:30:07 Check angles 10:30:07 SkyScan query 10:30:08 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 10:30:08 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 10:30:08 Check angles 10:30:08 SkyScan query 10:30:08 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 10:30:08 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 10:30:09 Check angles 10:30:09 SkyScan query 10:30:09 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 10:30:09 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 10:30:09 Check angles 10:30:09 SkyScan query 10:30:10 SkyScan query done: ret=0 az=162.135<-10809 ze=38.505<-9433 Statuses=0009 0008 10:30:10 Msec=2250 True Az=162.135 Ze=38.505 Az status=0009 Ze status=0008 10:30:10 Check angles 10:30:10 SkyScan query 10:30:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:30:11 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:30:11 Check angles 10:30:11 SkyScan query 10:30:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:30:11 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:30:11 Message to Master queued w/err=0: serial=271573 error=0 10:30:16 Received message from Master: op=Filter serial=271574 10:30:16 Color wheel filter change from 0 to 0 10:30:16 FLIGetFilterPos err=0 currentPosition=0 10:30:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:16 Filter is already there-color wheel unchanged 10:30:17 Received message from Master: op=Shutter serial=271575 10:30:17 Shutter LASER close 10:30:17 Received message from Camera: op=State serial=271577 10:30:17 GetSingleValue result=40 Value=cccccccc 10:30:17 SkyScan query 10:30:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:30:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:17 Parameters OK 10:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:17 Set A/D data flow result=40 10:30:17 Set A/D channel type result=40 10:30:17 Set A/D encoding result=40 10:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:17 Set channel filter=0.000000e+000 result=40 10:30:17 Config A/D Result=40 10:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:17 Get A/D filter: -9.255963e+061 result=40 10:30:17 Get A/D value=-858993460 result=40 10:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:17 Parameters OK 10:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:17 Set A/D data flow result=40 10:30:17 Set A/D channel type result=40 10:30:17 Set A/D encoding result=40 10:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:17 Set channel filter=0.000000e+000 result=40 10:30:17 Config A/D Result=40 10:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:17 Get A/D filter: -9.255963e+061 result=40 10:30:17 Get A/D value=-858993460 result=40 10:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:17 Aux= 10:30:17 Message to Camera, serial 271577 queued 10:30:54 Received message from Master: op=PointingHead serial=271590 10:30:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:30:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:30:55 Point started: ret=0 10:30:55 point_skyscan result=0 10:30:55 Check angles 10:30:55 SkyScan query 10:30:56 SkyScan query done: ret=0 az=152.73<-10182 ze=68.73<-7418 Statuses=0009 0009 10:30:56 Msec=0 True Az=152.73 Ze=68.73 Az status=0009 Ze status=0009 10:30:56 Check angles 10:30:56 SkyScan query 10:30:57 SkyScan query done: ret=0 az=135.165<-9011 ze=89.745<-6017 Statuses=0009 0009 10:30:57 Msec=750 True Az=135.165 Ze=89.745 Az status=0009 Ze status=0009 10:30:57 Check angles 10:30:57 SkyScan query 10:30:57 SkyScan query done: ret=0 az=117.66<-7844 ze=110.655<-4623 Statuses=0009 0009 10:30:57 Msec=1500 True Az=117.66 Ze=110.655 Az status=0009 Ze status=0009 10:30:58 Check angles 10:30:58 SkyScan query 10:30:58 SkyScan query done: ret=0 az=112.995<-7533 ze=131.64<-3224 Statuses=0008 0009 10:30:58 Msec=2250 True Az=112.995 Ze=131.64 Az status=0008 Ze status=0009 10:30:58 Check angles 10:30:58 SkyScan query 10:30:59 SkyScan query done: ret=0 az=112.995<-7533 ze=152.55<-1830 Statuses=0008 0009 10:30:59 Msec=3000 True Az=112.995 Ze=152.55 Az status=0008 Ze status=0009 10:30:59 Check angles 10:30:59 SkyScan query 10:31:00 SkyScan query done: ret=0 az=112.995<-7533 ze=173.535<-431 Statuses=0008 0009 10:31:00 Msec=3750 True Az=112.995 Ze=173.535 Az status=0008 Ze status=0009 10:31:00 Check angles 10:31:00 SkyScan query 10:31:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 10:31:00 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 10:31:00 Message to Master queued w/err=0: serial=271590 error=0 10:31:05 Received message from Master: op=Filter serial=271591 10:31:05 Color wheel filter change from 0 to 0 10:31:05 FLIGetFilterPos err=0 currentPosition=0 10:31:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:05 Filter is already there-color wheel unchanged 10:31:06 Received message from Master: op=Shutter serial=271592 10:31:06 Shutter LASER open 10:31:06 Received message from Camera: op=State serial=271594 10:31:06 GetSingleValue result=40 Value=cccccccc 10:31:06 SkyScan query 10:31:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:31:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:06 Parameters OK 10:31:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:06 Set A/D data flow result=40 10:31:06 Set A/D channel type result=40 10:31:06 Set A/D encoding result=40 10:31:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:06 Set channel filter=0.000000e+000 result=40 10:31:06 Config A/D Result=40 10:31:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:06 Get A/D filter: -9.255963e+061 result=40 10:31:06 Get A/D value=-858993460 result=40 10:31:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:06 Parameters OK 10:31:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:06 Set A/D data flow result=40 10:31:06 Set A/D channel type result=40 10:31:06 Set A/D encoding result=40 10:31:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:06 Set channel filter=0.000000e+000 result=40 10:31:06 Config A/D Result=40 10:31:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:06 Get A/D filter: -9.255963e+061 result=40 10:31:06 Get A/D value=-858993460 result=40 10:31:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:06 Aux= 10:31:06 Message to Camera, serial 271594 queued 10:31:15 Received message from Master: op=Shutter serial=271604 10:31:15 Shutter LASER close 10:31:15 Received message from Master: op=PointingHead serial=271608 10:31:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:31:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:31:16 Point started: ret=0 10:31:16 point_skyscan result=0 10:31:16 Check angles 10:31:16 SkyScan query 10:31:17 SkyScan query done: ret=0 az=89.88<-5992 ze=157.335<-1511 Statuses=0009 0009 10:31:17 Msec=0 True Az=89.88 Ze=157.335 Az status=0009 Ze status=0009 10:31:17 Check angles 10:31:17 SkyScan query 10:31:18 SkyScan query done: ret=0 az=72.54<-4836 ze=136.35<-2910 Statuses=0009 0009 10:31:18 Msec=750 True Az=72.54 Ze=136.35 Az status=0009 Ze status=0009 10:31:18 Check angles 10:31:18 SkyScan query 10:31:18 SkyScan query done: ret=0 az=55.14<-3676 ze=115.455<-4303 Statuses=0009 0009 10:31:18 Msec=1500 True Az=55.14 Ze=115.455 Az status=0009 Ze status=0009 10:31:19 Check angles 10:31:19 SkyScan query 10:31:19 SkyScan query done: ret=0 az=40.995<-2733 ze=94.425<-5705 Statuses=0009 0009 10:31:19 Msec=2250 True Az=40.995 Ze=94.425 Az status=0009 Ze status=0009 10:31:19 Check angles 10:31:19 SkyScan query 10:31:20 SkyScan query done: ret=0 az=40.995<-2733 ze=73.035<-7131 Statuses=0008 0009 10:31:20 Msec=3000 True Az=40.995 Ze=73.035 Az status=0008 Ze status=0009 10:31:20 Check angles 10:31:20 SkyScan query 10:31:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 10:31:21 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 10:31:21 Check angles 10:31:21 SkyScan query 10:31:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:31:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:31:21 Message to Master queued w/err=0: serial=271608 error=0 10:31:26 Received message from Master: op=Filter serial=271609 10:31:26 Color wheel filter change from 0 to 0 10:31:26 FLIGetFilterPos err=0 currentPosition=0 10:31:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:26 Filter is already there-color wheel unchanged 10:31:27 Received message from Master: op=Shutter serial=271610 10:31:27 Shutter LASER close 10:31:27 Received message from Camera: op=State serial=271612 10:31:27 GetSingleValue result=40 Value=cccccccc 10:31:27 SkyScan query 10:31:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:31:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:27 Parameters OK 10:31:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:27 Set A/D data flow result=40 10:31:27 Set A/D channel type result=40 10:31:27 Set A/D encoding result=40 10:31:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:27 Set channel filter=0.000000e+000 result=40 10:31:27 Config A/D Result=40 10:31:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:27 Get A/D filter: -9.255963e+061 result=40 10:31:27 Get A/D value=-858993460 result=40 10:31:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:27 Parameters OK 10:31:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:27 Set A/D data flow result=40 10:31:27 Set A/D channel type result=40 10:31:27 Set A/D encoding result=40 10:31:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:27 Set channel filter=0.000000e+000 result=40 10:31:27 Config A/D Result=40 10:31:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:27 Get A/D filter: -9.255963e+061 result=40 10:31:27 Get A/D value=-858993460 result=40 10:31:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:27 Aux= 10:31:27 Message to Camera, serial 271612 queued 10:32:04 Received message from Master: op=PointingHead serial=271625 10:32:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:32:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:32:04 Point started: ret=0 10:32:04 point_skyscan result=0 10:32:05 Check angles 10:32:05 SkyScan query 10:32:06 SkyScan query done: ret=0 az=64.17<-4278 ze=66.54<-7564 Statuses=0009 0008 10:32:06 Msec=0 True Az=64.17 Ze=66.54 Az status=0009 Ze status=0008 10:32:06 Check angles 10:32:06 SkyScan query 10:32:07 SkyScan query done: ret=0 az=82.08<-5472 ze=66.51<-7566 Statuses=0009 0008 10:32:07 Msec=750 True Az=82.08 Ze=66.51 Az status=0009 Ze status=0008 10:32:07 Check angles 10:32:07 SkyScan query 10:32:07 SkyScan query done: ret=0 az=99.54<-6636 ze=66.495<-7567 Statuses=0009 0008 10:32:07 Msec=1500 True Az=99.54 Ze=66.495 Az status=0009 Ze status=0008 10:32:07 Check angles 10:32:07 SkyScan query 10:32:08 SkyScan query done: ret=0 az=117.465<-7831 ze=66.495<-7567 Statuses=0009 0008 10:32:08 Msec=2250 True Az=117.465 Ze=66.495 Az status=0009 Ze status=0008 10:32:08 Check angles 10:32:08 SkyScan query 10:32:09 SkyScan query done: ret=0 az=134.79<-8986 ze=66.495<-7567 Statuses=0009 0008 10:32:09 Msec=3000 True Az=134.79 Ze=66.495 Az status=0009 Ze status=0008 10:32:09 Check angles 10:32:09 SkyScan query 10:32:10 SkyScan query done: ret=0 az=152.265<-10151 ze=66.495<-7567 Statuses=0009 0008 10:32:10 Msec=3750 True Az=152.265 Ze=66.495 Az status=0009 Ze status=0008 10:32:10 Check angles 10:32:10 SkyScan query 10:32:10 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:32:10 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:32:10 Message to Master queued w/err=0: serial=271625 error=0 10:32:15 Received message from Master: op=Filter serial=271626 10:32:15 Color wheel filter change from 0 to 0 10:32:15 FLIGetFilterPos err=0 currentPosition=0 10:32:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:15 Filter is already there-color wheel unchanged 10:32:15 Received message from Master: op=Shutter serial=271627 10:32:15 Shutter LASER close 10:32:16 Received message from Camera: op=State serial=271629 10:32:16 GetSingleValue result=40 Value=cccccccc 10:32:16 SkyScan query 10:32:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:32:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:16 Parameters OK 10:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:16 Set A/D data flow result=40 10:32:16 Set A/D channel type result=40 10:32:16 Set A/D encoding result=40 10:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:16 Set channel filter=0.000000e+000 result=40 10:32:16 Config A/D Result=40 10:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:16 Get A/D filter: -9.255963e+061 result=40 10:32:16 Get A/D value=-858993460 result=40 10:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:16 Parameters OK 10:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:16 Set A/D data flow result=40 10:32:16 Set A/D channel type result=40 10:32:16 Set A/D encoding result=40 10:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:16 Set channel filter=0.000000e+000 result=40 10:32:16 Config A/D Result=40 10:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:16 Get A/D filter: -9.255963e+061 result=40 10:32:16 Get A/D value=-858993460 result=40 10:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:16 Aux= 10:32:16 Message to Camera, serial 271629 queued 10:32:53 Received message from Master: op=PointingHead serial=271642 10:32:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:32:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:32:53 Point started: ret=0 10:32:53 point_skyscan result=0 10:32:54 Check angles 10:32:54 SkyScan query 10:32:55 SkyScan query done: ret=0 az=134.505<-8967 ze=96.855<-5543 Statuses=0009 0009 10:32:55 Msec=0 True Az=134.505 Ze=96.855 Az status=0009 Ze status=0009 10:32:55 Check angles 10:32:55 SkyScan query 10:32:56 SkyScan query done: ret=0 az=130.995<-8733 ze=118.245<-4117 Statuses=0008 0009 10:32:56 Msec=750 True Az=130.995 Ze=118.245 Az status=0008 Ze status=0009 10:32:56 Check angles 10:32:56 SkyScan query 10:32:56 SkyScan query done: ret=0 az=130.995<-8733 ze=139.215<-2719 Statuses=0008 0009 10:32:56 Msec=1500 True Az=130.995 Ze=139.215 Az status=0008 Ze status=0009 10:32:56 Check angles 10:32:56 SkyScan query 10:32:57 SkyScan query done: ret=0 az=130.995<-8733 ze=160.59<-1294 Statuses=0008 0009 10:32:57 Msec=2250 True Az=130.995 Ze=160.59 Az status=0008 Ze status=0009 10:32:57 Check angles 10:32:57 SkyScan query 10:32:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.005<-23867 Statuses=0008 0009 10:32:58 Msec=3000 True Az=130.995 Ze=-178.005 Az status=0008 Ze status=0009 10:32:58 Check angles 10:32:58 SkyScan query 10:32:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-156.615<-22441 Statuses=0008 0009 10:32:59 Msec=3750 True Az=130.995 Ze=-156.615 Az status=0008 Ze status=0009 10:32:59 Check angles 10:32:59 SkyScan query 10:32:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 10:32:59 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 10:33:00 Check angles 10:33:00 SkyScan query 10:33:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:33:00 Msec=5250 True Az=130.995 Ze=-141.495 Az status=0008 Ze status=0008 10:33:00 Message to Master queued w/err=0: serial=271642 error=0 10:33:05 Received message from Master: op=Filter serial=271643 10:33:05 Color wheel filter change from 0 to 0 10:33:05 FLIGetFilterPos err=0 currentPosition=0 10:33:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:05 Filter is already there-color wheel unchanged 10:33:05 Received message from Master: op=Shutter serial=271644 10:33:05 Shutter LASER close 10:33:05 Received message from Camera: op=State serial=271646 10:33:05 GetSingleValue result=40 Value=cccccccc 10:33:05 SkyScan query 10:33:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:33:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:06 Parameters OK 10:33:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:06 Set A/D data flow result=40 10:33:06 Set A/D channel type result=40 10:33:06 Set A/D encoding result=40 10:33:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:06 Set channel filter=0.000000e+000 result=40 10:33:06 Config A/D Result=40 10:33:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:06 Get A/D filter: -9.255963e+061 result=40 10:33:06 Get A/D value=-858993460 result=40 10:33:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:06 Parameters OK 10:33:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:06 Set A/D data flow result=40 10:33:06 Set A/D channel type result=40 10:33:06 Set A/D encoding result=40 10:33:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:06 Set channel filter=0.000000e+000 result=40 10:33:06 Config A/D Result=40 10:33:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:06 Get A/D filter: -9.255963e+061 result=40 10:33:06 Get A/D value=-858993460 result=40 10:33:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:06 Aux= 10:33:06 Message to Camera, serial 271646 queued 10:33:42 Received message from Master: op=PointingHead serial=271658 10:33:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:33:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:33:42 Point started: ret=0 10:33:42 point_skyscan result=0 10:33:43 Check angles 10:33:43 SkyScan query 10:33:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 10:33:43 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 10:33:44 Check angles 10:33:44 SkyScan query 10:33:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:33:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:33:44 Message to Master queued w/err=0: serial=271658 error=0 10:33:49 Received message from Master: op=Filter serial=271659 10:33:49 Color wheel filter change from 0 to 0 10:33:49 FLIGetFilterPos err=0 currentPosition=0 10:33:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:49 Filter is already there-color wheel unchanged 10:33:49 Received message from Master: op=Shutter serial=271660 10:33:49 Shutter LASER open 10:33:50 Received message from Camera: op=State serial=271662 10:33:50 GetSingleValue result=40 Value=cccccccc 10:33:50 SkyScan query 10:33:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:33:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:50 Parameters OK 10:33:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:50 Set A/D data flow result=40 10:33:50 Set A/D channel type result=40 10:33:50 Set A/D encoding result=40 10:33:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:50 Set channel filter=0.000000e+000 result=40 10:33:50 Config A/D Result=40 10:33:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:50 Get A/D filter: -9.255963e+061 result=40 10:33:50 Get A/D value=-858993460 result=40 10:33:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:50 Parameters OK 10:33:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:50 Set A/D data flow result=40 10:33:50 Set A/D channel type result=40 10:33:50 Set A/D encoding result=40 10:33:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:50 Set channel filter=0.000000e+000 result=40 10:33:50 Config A/D Result=40 10:33:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:50 Get A/D filter: -9.255963e+061 result=40 10:33:50 Get A/D value=-858993460 result=40 10:33:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:50 Aux= 10:33:50 Message to Camera, serial 271662 queued 10:33:59 Received message from Master: op=Shutter serial=271672 10:33:59 Shutter LASER close 10:33:59 Received message from Master: op=PointingHead serial=271676 10:33:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:33:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:34:00 Point started: ret=0 10:34:00 point_skyscan result=0 10:34:00 Check angles 10:34:00 SkyScan query 10:34:01 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.535<-21569 Statuses=0009 0009 10:34:01 Msec=0 True Az=135.78 Ze=-143.535 Az status=0009 Ze status=0009 10:34:01 Check angles 10:34:01 SkyScan query 10:34:02 SkyScan query done: ret=0 az=153.27<-10218 ze=-122.55<-20170 Statuses=0009 0009 10:34:02 Msec=750 True Az=153.27 Ze=-122.55 Az status=0009 Ze status=0009 10:34:02 Check angles 10:34:02 SkyScan query 10:34:02 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.205<-18747 Statuses=0009 0009 10:34:02 Msec=1500 True Az=171.18 Ze=-101.205 Az status=0009 Ze status=0009 10:34:03 Check angles 10:34:03 SkyScan query 10:34:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.265<-17351 Statuses=0008 0009 10:34:03 Msec=2250 True Az=176.01 Ze=-80.265 Az status=0008 Ze status=0009 10:34:03 Check angles 10:34:03 SkyScan query 10:34:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 10:34:04 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 10:34:04 Check angles 10:34:04 SkyScan query 10:34:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:34:05 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:34:05 Message to Master queued w/err=0: serial=271676 error=0 10:34:10 Received message from Master: op=Filter serial=271677 10:34:10 Color wheel filter change from 0 to 0 10:34:10 FLIGetFilterPos err=0 currentPosition=0 10:34:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:10 Filter is already there-color wheel unchanged 10:34:10 Received message from Master: op=Shutter serial=271678 10:34:10 Shutter LASER close 10:34:10 Received message from Camera: op=State serial=271680 10:34:10 GetSingleValue result=40 Value=cccccccc 10:34:10 SkyScan query 10:34:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:34:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:11 Parameters OK 10:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:11 Set A/D data flow result=40 10:34:11 Set A/D channel type result=40 10:34:11 Set A/D encoding result=40 10:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:11 Set channel filter=0.000000e+000 result=40 10:34:11 Config A/D Result=40 10:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:11 Get A/D filter: -9.255963e+061 result=40 10:34:11 Get A/D value=-858993460 result=40 10:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:11 Parameters OK 10:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:11 Set A/D data flow result=40 10:34:11 Set A/D channel type result=40 10:34:11 Set A/D encoding result=40 10:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:11 Set channel filter=0.000000e+000 result=40 10:34:11 Config A/D Result=40 10:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:11 Get A/D filter: -9.255963e+061 result=40 10:34:11 Get A/D value=-858993460 result=40 10:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:11 Aux= 10:34:11 Message to Camera, serial 271680 queued 10:34:46 Received message from Master: op=PointingHead serial=271692 10:34:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:34:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:34:47 Point started: ret=0 10:34:47 point_skyscan result=0 10:34:48 Check angles 10:34:48 SkyScan query 10:34:48 SkyScan query done: ret=0 az=153.075<-10205 ze=-21.855<-13457 Statuses=0009 0009 10:34:48 Msec=0 True Az=153.075 Ze=-21.855 Az status=0009 Ze status=0009 10:34:48 Check angles 10:34:48 SkyScan query 10:34:49 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.825<-12055 Statuses=0009 0009 10:34:49 Msec=750 True Az=135.63 Ze=-0.825 Az status=0009 Ze status=0009 10:34:49 Check angles 10:34:49 SkyScan query 10:34:50 SkyScan query done: ret=0 az=117.66<-7844 ze=20.535<-10631 Statuses=0009 0009 10:34:50 Msec=1500 True Az=117.66 Ze=20.535 Az status=0009 Ze status=0009 10:34:50 Check angles 10:34:50 SkyScan query 10:34:50 SkyScan query done: ret=0 az=100.35<-6690 ze=41.505<-9233 Statuses=0009 0009 10:34:50 Msec=2250 True Az=100.35 Ze=41.505 Az status=0009 Ze status=0009 10:34:51 Check angles 10:34:51 SkyScan query 10:34:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 10:34:51 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 10:34:51 Check angles 10:34:51 SkyScan query 10:34:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:34:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:34:52 Message to Master queued w/err=0: serial=271692 error=0 10:34:57 Received message from Master: op=Filter serial=271693 10:34:57 Color wheel filter change from 0 to 0 10:34:57 FLIGetFilterPos err=0 currentPosition=0 10:34:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:57 Filter is already there-color wheel unchanged 10:34:57 Received message from Master: op=Shutter serial=271694 10:34:57 Shutter LASER close 10:34:57 Received message from Camera: op=State serial=271696 10:34:57 GetSingleValue result=40 Value=cccccccc 10:34:57 SkyScan query 10:34:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:34:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:58 Parameters OK 10:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:58 Set A/D data flow result=40 10:34:58 Set A/D channel type result=40 10:34:58 Set A/D encoding result=40 10:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:58 Set channel filter=0.000000e+000 result=40 10:34:58 Config A/D Result=40 10:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:58 Get A/D filter: -9.255963e+061 result=40 10:34:58 Get A/D value=-858993460 result=40 10:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:58 Parameters OK 10:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:58 Set A/D data flow result=40 10:34:58 Set A/D channel type result=40 10:34:58 Set A/D encoding result=40 10:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:58 Set channel filter=0.000000e+000 result=40 10:34:58 Config A/D Result=40 [UTC 2018-12-19 10:34:58] 10:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:58 Get A/D filter: -9.255963e+061 result=40 10:34:58 Get A/D value=-858993460 result=40 10:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:58 Aux= 10:34:58 Message to Camera, serial 271696 queued 10:35:35 Received message from Master: op=PointingHead serial=271709 10:35:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:35:35 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:35:35 Point started: ret=0 10:35:35 point_skyscan result=0 10:35:36 Check angles 10:35:36 SkyScan query 10:35:36 SkyScan query done: ret=0 az=109.365<-7291 ze=38.475<-9435 Statuses=0009 0008 10:35:36 Msec=0 True Az=109.365 Ze=38.475 Az status=0009 Ze status=0008 10:35:36 Check angles 10:35:36 SkyScan query 10:35:37 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 10:35:37 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 10:35:37 Check angles 10:35:37 SkyScan query 10:35:38 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 10:35:38 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 10:35:38 Check angles 10:35:38 SkyScan query 10:35:38 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 10:35:38 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 10:35:39 Check angles 10:35:39 SkyScan query 10:35:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:35:39 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:35:39 Check angles 10:35:39 SkyScan query 10:35:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:35:40 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:35:40 Message to Master queued w/err=0: serial=271709 error=0 10:35:45 Received message from Master: op=Filter serial=271710 10:35:45 Color wheel filter change from 0 to 0 10:35:45 FLIGetFilterPos err=0 currentPosition=0 10:35:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:45 Filter is already there-color wheel unchanged 10:35:45 Received message from Master: op=Shutter serial=271711 10:35:45 Shutter LASER close 10:35:45 Received message from Camera: op=State serial=271713 10:35:45 GetSingleValue result=40 Value=cccccccc 10:35:45 SkyScan query 10:35:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:35:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:46 Parameters OK 10:35:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:46 Set A/D data flow result=40 10:35:46 Set A/D channel type result=40 10:35:46 Set A/D encoding result=40 10:35:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:46 Set channel filter=0.000000e+000 result=40 10:35:46 Config A/D Result=40 10:35:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:46 Get A/D filter: -9.255963e+061 result=40 10:35:46 Get A/D value=-858993460 result=40 10:35:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:46 Parameters OK 10:35:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:46 Set A/D data flow result=40 10:35:46 Set A/D channel type result=40 10:35:46 Set A/D encoding result=40 10:35:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:46 Set channel filter=0.000000e+000 result=40 10:35:46 Config A/D Result=40 10:35:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:46 Get A/D filter: -9.255963e+061 result=40 10:35:46 Get A/D value=-858993460 result=40 10:35:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:46 Aux= 10:35:46 Message to Camera, serial 271713 queued [UTC 2018-12-19 10:35:52] 10:36:23 Received message from Master: op=PointingHead serial=271726 10:36:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:36:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:36:23 Point started: ret=0 10:36:23 point_skyscan result=0 10:36:24 Check angles 10:36:24 SkyScan query 10:36:24 SkyScan query done: ret=0 az=153.225<-10215 ze=68.055<-7463 Statuses=0009 0009 10:36:24 Msec=0 True Az=153.225 Ze=68.055 Az status=0009 Ze status=0009 10:36:25 Check angles 10:36:25 SkyScan query 10:36:25 SkyScan query done: ret=0 az=135.345<-9023 ze=89.49<-6034 Statuses=0009 0009 10:36:25 Msec=750 True Az=135.345 Ze=89.49 Az status=0009 Ze status=0009 10:36:25 Check angles 10:36:25 SkyScan query 10:36:26 SkyScan query done: ret=0 az=117.81<-7854 ze=110.385<-4641 Statuses=0009 0009 10:36:26 Msec=1500 True Az=117.81 Ze=110.385 Az status=0009 Ze status=0009 10:36:26 Check angles 10:36:26 SkyScan query 10:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=131.37<-3242 Statuses=0008 0009 10:36:27 Msec=2250 True Az=112.995 Ze=131.37 Az status=0008 Ze status=0009 10:36:27 Check angles 10:36:27 SkyScan query 10:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=152.25<-1850 Statuses=0008 0009 10:36:27 Msec=3000 True Az=112.995 Ze=152.25 Az status=0008 Ze status=0009 10:36:28 Check angles 10:36:28 SkyScan query 10:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=173.235<-451 Statuses=0008 0009 10:36:28 Msec=3750 True Az=112.995 Ze=173.235 Az status=0008 Ze status=0009 10:36:28 Check angles 10:36:28 SkyScan query 10:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 10:36:29 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 10:36:29 Message to Master queued w/err=0: serial=271726 error=0 10:36:34 Received message from Master: op=Filter serial=271727 10:36:34 Color wheel filter change from 0 to 0 10:36:34 FLIGetFilterPos err=0 currentPosition=0 10:36:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:34 Filter is already there-color wheel unchanged 10:36:34 Received message from Master: op=Shutter serial=271728 10:36:34 Shutter LASER open 10:36:34 Received message from Camera: op=State serial=271730 10:36:34 GetSingleValue result=40 Value=cccccccc 10:36:34 SkyScan query 10:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:36:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:35 Parameters OK 10:36:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:35 Set A/D data flow result=40 10:36:35 Set A/D channel type result=40 10:36:35 Set A/D encoding result=40 10:36:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:35 Set channel filter=0.000000e+000 result=40 10:36:35 Config A/D Result=40 10:36:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:35 Get A/D filter: -9.255963e+061 result=40 10:36:35 Get A/D value=-858993460 result=40 10:36:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:35 Parameters OK 10:36:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:35 Set A/D data flow result=40 10:36:35 Set A/D channel type result=40 10:36:35 Set A/D encoding result=40 10:36:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:35 Set channel filter=0.000000e+000 result=40 10:36:35 Config A/D Result=40 10:36:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:35 Get A/D filter: -9.255963e+061 result=40 10:36:35 Get A/D value=-858993460 result=40 10:36:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:35 Aux= 10:36:35 Message to Camera, serial 271730 queued 10:36:43 Received message from Master: op=Shutter serial=271740 10:36:43 Shutter LASER close 10:36:44 Received message from Master: op=PointingHead serial=271744 10:36:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:36:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:36:44 Point started: ret=0 10:36:44 point_skyscan result=0 10:36:45 Check angles 10:36:45 SkyScan query 10:36:45 SkyScan query done: ret=0 az=90.06<-6004 ze=157.32<-1512 Statuses=0009 0009 10:36:45 Msec=0 True Az=90.06 Ze=157.32 Az status=0009 Ze status=0009 10:36:46 Check angles 10:36:46 SkyScan query 10:36:46 SkyScan query done: ret=0 az=72.135<-4809 ze=135.945<-2937 Statuses=0009 0009 10:36:46 Msec=750 True Az=72.135 Ze=135.945 Az status=0009 Ze status=0009 10:36:46 Check angles 10:36:46 SkyScan query 10:36:47 SkyScan query done: ret=0 az=54.615<-3641 ze=115.005<-4333 Statuses=0009 0009 10:36:47 Msec=1500 True Az=54.615 Ze=115.005 Az status=0009 Ze status=0009 10:36:47 Check angles 10:36:47 SkyScan query 10:36:48 SkyScan query done: ret=0 az=40.98<-2732 ze=94.005<-5733 Statuses=0009 0009 10:36:48 Msec=2250 True Az=40.98 Ze=94.005 Az status=0009 Ze status=0009 10:36:48 Check angles 10:36:48 SkyScan query 10:36:48 SkyScan query done: ret=0 az=40.995<-2733 ze=72.57<-7162 Statuses=0008 0009 10:36:48 Msec=3000 True Az=40.995 Ze=72.57 Az status=0008 Ze status=0009 10:36:49 Check angles 10:36:49 SkyScan query 10:36:49 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 10:36:49 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 10:36:49 Check angles 10:36:49 SkyScan query 10:36:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:36:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:36:50 Message to Master queued w/err=0: serial=271744 error=0 10:36:55 Received message from Master: op=Filter serial=271745 10:36:55 Color wheel filter change from 0 to 0 10:36:55 FLIGetFilterPos err=0 currentPosition=0 10:36:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:55 Filter is already there-color wheel unchanged 10:36:55 Received message from Master: op=Shutter serial=271746 10:36:55 Shutter LASER close 10:36:55 Received message from Camera: op=State serial=271748 10:36:55 GetSingleValue result=40 Value=cccccccc 10:36:55 SkyScan query 10:36:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:36:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:56 Parameters OK 10:36:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:56 Set A/D data flow result=40 10:36:56 Set A/D channel type result=40 10:36:56 Set A/D encoding result=40 10:36:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:56 Set channel filter=0.000000e+000 result=40 10:36:56 Config A/D Result=40 10:36:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:56 Get A/D filter: -9.255963e+061 result=40 10:36:56 Get A/D value=-858993460 result=40 10:36:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:56 Parameters OK 10:36:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:56 Set A/D data flow result=40 10:36:56 Set A/D channel type result=40 10:36:56 Set A/D encoding result=40 10:36:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:56 Set channel filter=0.000000e+000 result=40 10:36:56 Config A/D Result=40 10:36:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:56 Get A/D filter: -9.255963e+061 result=40 10:36:56 Get A/D value=-858993460 result=40 10:36:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:56 Aux= 10:36:56 Message to Camera, serial 271748 queued 10:37:33 Received message from Master: op=PointingHead serial=271761 10:37:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:37:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:37:33 Point started: ret=0 10:37:33 point_skyscan result=0 10:37:34 Check angles 10:37:34 SkyScan query 10:37:34 SkyScan query done: ret=0 az=63.795<-4253 ze=66.54<-7564 Statuses=0009 0008 10:37:34 Msec=0 True Az=63.795 Ze=66.54 Az status=0009 Ze status=0008 10:37:35 Check angles 10:37:35 SkyScan query 10:37:35 SkyScan query done: ret=0 az=81.21<-5414 ze=66.51<-7566 Statuses=0009 0008 10:37:35 Msec=750 True Az=81.21 Ze=66.51 Az status=0009 Ze status=0008 10:37:35 Check angles 10:37:35 SkyScan query 10:37:36 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 10:37:36 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 10:37:36 Check angles 10:37:36 SkyScan query 10:37:37 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 10:37:37 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 10:37:37 Check angles 10:37:37 SkyScan query 10:37:37 SkyScan query done: ret=0 az=133.965<-8931 ze=66.495<-7567 Statuses=0009 0008 10:37:37 Msec=3000 True Az=133.965 Ze=66.495 Az status=0009 Ze status=0008 10:37:38 Check angles 10:37:38 SkyScan query 10:37:38 SkyScan query done: ret=0 az=151.44<-10096 ze=66.495<-7567 Statuses=0009 0008 10:37:38 Msec=3750 True Az=151.44 Ze=66.495 Az status=0009 Ze status=0008 10:37:38 Check angles 10:37:38 SkyScan query 10:37:39 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 10:37:39 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 10:37:39 Message to Master queued w/err=0: serial=271761 error=0 10:37:44 Received message from Master: op=Filter serial=271762 10:37:44 Color wheel filter change from 0 to 0 10:37:44 FLIGetFilterPos err=0 currentPosition=0 10:37:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:44 Filter is already there-color wheel unchanged 10:37:44 Received message from Master: op=Shutter serial=271763 10:37:44 Shutter LASER close 10:37:44 Received message from Camera: op=State serial=271765 10:37:44 GetSingleValue result=40 Value=cccccccc 10:37:44 SkyScan query 10:37:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:37:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:45 Parameters OK 10:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:45 Set A/D data flow result=40 10:37:45 Set A/D channel type result=40 10:37:45 Set A/D encoding result=40 10:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:45 Set channel filter=0.000000e+000 result=40 10:37:45 Config A/D Result=40 10:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:45 Get A/D filter: -9.255963e+061 result=40 10:37:45 Get A/D value=-858993460 result=40 10:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:45 Parameters OK 10:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:45 Set A/D data flow result=40 10:37:45 Set A/D channel type result=40 10:37:45 Set A/D encoding result=40 10:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:45 Set channel filter=0.000000e+000 result=40 10:37:45 Config A/D Result=40 10:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:45 Get A/D filter: -9.255963e+061 result=40 10:37:45 Get A/D value=-858993460 result=40 10:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:45 Aux= 10:37:45 Message to Camera, serial 271765 queued 10:38:22 Received message from Master: op=PointingHead serial=271778 10:38:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:38:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:38:22 Point started: ret=0 10:38:22 point_skyscan result=0 10:38:23 Check angles 10:38:23 SkyScan query 10:38:23 SkyScan query done: ret=0 az=134.775<-8985 ze=96.63<-5558 Statuses=0009 0009 10:38:23 Msec=0 True Az=134.775 Ze=96.63 Az status=0009 Ze status=0009 10:38:24 Check angles 10:38:24 SkyScan query 10:38:24 SkyScan query done: ret=0 az=130.995<-8733 ze=117.99<-4134 Statuses=0008 0009 10:38:24 Msec=750 True Az=130.995 Ze=117.99 Az status=0008 Ze status=0009 10:38:24 Check angles 10:38:24 SkyScan query 10:38:25 SkyScan query done: ret=0 az=130.995<-8733 ze=139.41<-2706 Statuses=0008 0009 10:38:25 Msec=1500 True Az=130.995 Ze=139.41 Az status=0008 Ze status=0009 10:38:25 Check angles 10:38:25 SkyScan query 10:38:26 SkyScan query done: ret=0 az=130.98<-8732 ze=160.38<-1308 Statuses=0008 0009 10:38:26 Msec=2250 True Az=130.98 Ze=160.38 Az status=0008 Ze status=0009 10:38:26 Check angles 10:38:26 SkyScan query 10:38:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.68<-23912 Statuses=0008 0009 10:38:26 Msec=3000 True Az=130.995 Ze=-178.68 Az status=0008 Ze status=0009 10:38:27 Check angles 10:38:27 SkyScan query 10:38:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.77<-22518 Statuses=0008 0009 10:38:27 Msec=3750 True Az=130.995 Ze=-157.77 Az status=0008 Ze status=0009 10:38:27 Check angles 10:38:27 SkyScan query 10:38:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 10:38:28 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 10:38:28 Check angles 10:38:28 SkyScan query 10:38:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 10:38:29 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 10:38:29 Message to Master queued w/err=0: serial=271778 error=0 10:38:34 Received message from Master: op=Filter serial=271779 10:38:34 Color wheel filter change from 0 to 0 10:38:34 FLIGetFilterPos err=0 currentPosition=0 10:38:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:34 Filter is already there-color wheel unchanged 10:38:34 Received message from Master: op=Shutter serial=271780 10:38:34 Shutter LASER close 10:38:34 Received message from Camera: op=State serial=271782 10:38:34 GetSingleValue result=40 Value=cccccccc 10:38:34 SkyScan query 10:38:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:38:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:34 Parameters OK 10:38:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:34 Set A/D data flow result=40 10:38:34 Set A/D channel type result=40 10:38:34 Set A/D encoding result=40 10:38:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:34 Set channel filter=0.000000e+000 result=40 10:38:34 Config A/D Result=40 10:38:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:34 Get A/D filter: -9.255963e+061 result=40 10:38:34 Get A/D value=-858993460 result=40 10:38:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:34 Parameters OK 10:38:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:34 Set A/D data flow result=40 10:38:34 Set A/D channel type result=40 10:38:34 Set A/D encoding result=40 10:38:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:34 Set channel filter=0.000000e+000 result=40 10:38:34 Config A/D Result=40 10:38:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:34 Get A/D filter: -9.255963e+061 result=40 10:38:34 Get A/D value=-858993460 result=40 10:38:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:34 Aux= 10:38:34 Message to Camera, serial 271782 queued 10:39:11 Received message from Master: op=PointingHead serial=271795 10:39:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:39:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:39:12 Point started: ret=0 10:39:12 point_skyscan result=0 10:39:13 Check angles 10:39:13 SkyScan query 10:39:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.375<-23425 Statuses=0009 0009 10:39:13 Msec=0 True Az=113.01 Ze=-171.375 Az status=0009 Ze status=0009 10:39:13 Check angles 10:39:13 SkyScan query 10:39:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:39:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:39:14 Message to Master queued w/err=0: serial=271795 error=0 10:39:19 Received message from Master: op=Filter serial=271796 10:39:19 Color wheel filter change from 0 to 0 10:39:19 FLIGetFilterPos err=0 currentPosition=0 10:39:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:19 Filter is already there-color wheel unchanged 10:39:19 Received message from Master: op=Shutter serial=271797 10:39:19 Shutter LASER open 10:39:19 Received message from Camera: op=State serial=271799 10:39:19 GetSingleValue result=40 Value=cccccccc 10:39:19 SkyScan query 10:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:39:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:20 Parameters OK 10:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:20 Set A/D data flow result=40 10:39:20 Set A/D channel type result=40 10:39:20 Set A/D encoding result=40 10:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:20 Set channel filter=0.000000e+000 result=40 10:39:20 Config A/D Result=40 10:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:20 Get A/D filter: -9.255963e+061 result=40 10:39:20 Get A/D value=-858993460 result=40 10:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:20 Parameters OK 10:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:20 Set A/D data flow result=40 10:39:20 Set A/D channel type result=40 10:39:20 Set A/D encoding result=40 10:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:20 Set channel filter=0.000000e+000 result=40 10:39:20 Config A/D Result=40 10:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:20 Get A/D filter: -9.255963e+061 result=40 10:39:20 Get A/D value=-858993460 result=40 10:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:20 Aux= 10:39:20 Message to Camera, serial 271799 queued 10:39:28 Received message from Master: op=Shutter serial=271809 10:39:28 Shutter LASER close 10:39:29 Received message from Master: op=PointingHead serial=271813 10:39:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:39:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:39:29 Point started: ret=0 10:39:29 point_skyscan result=0 10:39:30 Check angles 10:39:30 SkyScan query 10:39:31 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.235<-21549 Statuses=0009 0009 10:39:31 Msec=0 True Az=135.96 Ze=-143.235 Az status=0009 Ze status=0009 10:39:31 Check angles 10:39:31 SkyScan query 10:39:31 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.265<-20151 Statuses=0009 0009 10:39:31 Msec=750 True Az=153.45 Ze=-122.265 Az status=0009 Ze status=0009 10:39:31 Check angles 10:39:31 SkyScan query 10:39:32 SkyScan query done: ret=0 az=171.345<-11423 ze=-100.77<-18718 Statuses=0009 0009 10:39:32 Msec=1500 True Az=171.345 Ze=-100.77 Az status=0009 Ze status=0009 10:39:32 Check angles 10:39:32 SkyScan query 10:39:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.41<-17294 Statuses=0008 0009 10:39:33 Msec=2250 True Az=176.01 Ze=-79.41 Az status=0008 Ze status=0009 10:39:33 Check angles 10:39:33 SkyScan query 10:39:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 10:39:34 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 10:39:34 Check angles 10:39:34 SkyScan query 10:39:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 10:39:34 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 10:39:34 Message to Master queued w/err=0: serial=271813 error=0 10:39:39 Received message from Master: op=Filter serial=271814 10:39:39 Color wheel filter change from 0 to 0 10:39:39 FLIGetFilterPos err=0 currentPosition=0 10:39:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:39 Filter is already there-color wheel unchanged 10:39:39 Received message from Master: op=Shutter serial=271815 10:39:39 Shutter LASER close 10:39:40 Received message from Camera: op=State serial=271817 10:39:40 GetSingleValue result=40 Value=cccccccc 10:39:40 SkyScan query 10:39:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:39:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:40 Parameters OK 10:39:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:40 Set A/D data flow result=40 10:39:40 Set A/D channel type result=40 10:39:40 Set A/D encoding result=40 10:39:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:40 Set channel filter=0.000000e+000 result=40 10:39:40 Config A/D Result=40 10:39:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:40 Get A/D filter: -9.255963e+061 result=40 10:39:40 Get A/D value=-858993460 result=40 10:39:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:40 Parameters OK 10:39:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:40 Set A/D data flow result=40 10:39:40 Set A/D channel type result=40 10:39:40 Set A/D encoding result=40 10:39:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:40 Set channel filter=0.000000e+000 result=40 10:39:40 Config A/D Result=40 10:39:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:40 Get A/D filter: -9.255963e+061 result=40 10:39:40 Get A/D value=-858993460 result=40 10:39:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:40 Aux= 10:39:40 Message to Camera, serial 271817 queued 10:40:17 Received message from Master: op=PointingHead serial=271830 10:40:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:40:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:40:17 Point started: ret=0 10:40:17 point_skyscan result=0 10:40:18 Check angles 10:40:18 SkyScan query 10:40:19 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.975<-13465 Statuses=0009 0009 10:40:19 Msec=0 True Az=153.18 Ze=-21.975 Az status=0009 Ze status=0009 10:40:19 Check angles 10:40:19 SkyScan query 10:40:19 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.945<-12063 Statuses=0009 0009 10:40:19 Msec=750 True Az=135.705 Ze=-0.945 Az status=0009 Ze status=0009 10:40:20 Check angles 10:40:20 SkyScan query 10:40:20 SkyScan query done: ret=0 az=118.2<-7880 ze=19.965<-10669 Statuses=0009 0009 10:40:20 Msec=1500 True Az=118.2 Ze=19.965 Az status=0009 Ze status=0009 10:40:20 Check angles 10:40:20 SkyScan query 10:40:21 SkyScan query done: ret=0 az=100.8<-6720 ze=40.98<-9268 Statuses=0009 0009 10:40:21 Msec=2250 True Az=100.8 Ze=40.98 Az status=0009 Ze status=0009 10:40:21 Check angles 10:40:21 SkyScan query 10:40:22 SkyScan query done: ret=0 az=85.965<-5731 ze=51.57<-8562 Statuses=0009 0008 10:40:22 Msec=3000 True Az=85.965 Ze=51.57 Az status=0009 Ze status=0008 10:40:22 Check angles 10:40:22 SkyScan query 10:40:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:40:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:40:22 Message to Master queued w/err=0: serial=271830 error=0 10:40:27 Received message from Master: op=Filter serial=271831 10:40:27 Color wheel filter change from 0 to 0 10:40:27 FLIGetFilterPos err=0 currentPosition=0 10:40:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:27 Filter is already there-color wheel unchanged 10:40:28 Received message from Master: op=Shutter serial=271832 10:40:28 Shutter LASER close 10:40:28 Received message from Camera: op=State serial=271834 10:40:28 GetSingleValue result=40 Value=cccccccc 10:40:28 SkyScan query 10:40:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:40:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:28 Parameters OK 10:40:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:28 Set A/D data flow result=40 10:40:28 Set A/D channel type result=40 10:40:28 Set A/D encoding result=40 10:40:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:28 Set channel filter=0.000000e+000 result=40 10:40:28 Config A/D Result=40 10:40:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:28 Get A/D filter: -9.255963e+061 result=40 10:40:28 Get A/D value=-858993460 result=40 10:40:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:28 Parameters OK 10:40:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:28 Set A/D data flow result=40 10:40:28 Set A/D channel type result=40 10:40:28 Set A/D encoding result=40 10:40:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:28 Set channel filter=0.000000e+000 result=40 10:40:28 Config A/D Result=40 10:40:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:28 Get A/D filter: -9.255963e+061 result=40 10:40:28 Get A/D value=-858993460 result=40 10:40:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:28 Aux= 10:40:28 Message to Camera, serial 271834 queued 10:41:05 Received message from Master: op=PointingHead serial=271847 10:41:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:41:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:41:05 Point started: ret=0 10:41:05 point_skyscan result=0 10:41:06 Check angles 10:41:06 SkyScan query 10:41:07 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 10:41:07 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 10:41:07 Check angles 10:41:07 SkyScan query 10:41:08 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 10:41:08 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 10:41:08 Check angles 10:41:08 SkyScan query 10:41:08 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 10:41:08 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 10:41:08 Check angles 10:41:08 SkyScan query 10:41:09 SkyScan query done: ret=0 az=161.28<-10752 ze=38.505<-9433 Statuses=0009 0008 10:41:09 Msec=2250 True Az=161.28 Ze=38.505 Az status=0009 Ze status=0008 10:41:09 Check angles 10:41:09 SkyScan query 10:41:10 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:41:10 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:41:10 Check angles 10:41:10 SkyScan query 10:41:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:41:11 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:41:11 Message to Master queued w/err=0: serial=271847 error=0 10:41:16 Received message from Master: op=Filter serial=271848 10:41:16 Color wheel filter change from 0 to 0 10:41:16 FLIGetFilterPos err=0 currentPosition=0 10:41:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:16 Filter is already there-color wheel unchanged 10:41:16 Received message from Master: op=Shutter serial=271849 10:41:16 Shutter LASER close 10:41:16 Received message from Camera: op=State serial=271851 10:41:16 GetSingleValue result=40 Value=cccccccc 10:41:16 SkyScan query 10:41:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:41:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:16 Parameters OK 10:41:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:16 Set A/D data flow result=40 10:41:16 Set A/D channel type result=40 10:41:16 Set A/D encoding result=40 10:41:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:16 Set channel filter=0.000000e+000 result=40 10:41:16 Config A/D Result=40 10:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:16 Get A/D filter: -9.255963e+061 result=40 10:41:16 Get A/D value=-858993460 result=40 10:41:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:16 Parameters OK 10:41:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:16 Set A/D data flow result=40 10:41:16 Set A/D channel type result=40 10:41:16 Set A/D encoding result=40 10:41:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:16 Set channel filter=0.000000e+000 result=40 10:41:16 Config A/D Result=40 10:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:16 Get A/D filter: -9.255963e+061 result=40 10:41:16 Get A/D value=-858993460 result=40 10:41:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:16 Aux= 10:41:16 Message to Camera, serial 271851 queued 10:41:53 Received message from Master: op=PointingHead serial=271864 10:41:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:41:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:41:54 Point started: ret=0 10:41:54 point_skyscan result=0 10:41:54 Check angles 10:41:54 SkyScan query 10:41:55 SkyScan query done: ret=0 az=153.09<-10206 ze=68.25<-7450 Statuses=0009 0009 10:41:55 Msec=0 True Az=153.09 Ze=68.25 Az status=0009 Ze status=0009 10:41:55 Check angles 10:41:55 SkyScan query 10:41:56 SkyScan query done: ret=0 az=135.645<-9043 ze=89.235<-6051 Statuses=0009 0009 10:41:56 Msec=750 True Az=135.645 Ze=89.235 Az status=0009 Ze status=0009 10:41:56 Check angles 10:41:56 SkyScan query 10:41:56 SkyScan query done: ret=0 az=118.11<-7874 ze=110.19<-4654 Statuses=0009 0009 10:41:56 Msec=1500 True Az=118.11 Ze=110.19 Az status=0009 Ze status=0009 10:41:57 Check angles 10:41:57 SkyScan query 10:41:57 SkyScan query done: ret=0 az=112.995<-7533 ze=131.115<-3259 Statuses=0008 0009 10:41:57 Msec=2250 True Az=112.995 Ze=131.115 Az status=0008 Ze status=0009 10:41:57 Check angles 10:41:57 SkyScan query 10:41:58 SkyScan query done: ret=0 az=112.995<-7533 ze=152.04<-1864 Statuses=0008 0009 10:41:58 Msec=3000 True Az=112.995 Ze=152.04 Az status=0008 Ze status=0009 10:41:58 Check angles 10:41:58 SkyScan query 10:41:59 SkyScan query done: ret=0 az=112.995<-7533 ze=173.01<-466 Statuses=0008 0009 10:41:59 Msec=3750 True Az=112.995 Ze=173.01 Az status=0008 Ze status=0009 10:41:59 Check angles 10:41:59 SkyScan query 10:41:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0009 10:41:59 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0009 10:42:00 Check angles 10:42:00 SkyScan query 10:42:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.95<-23530 Statuses=0008 0008 10:42:00 Msec=5250 True Az=112.995 Ze=-172.95 Az status=0008 Ze status=0008 10:42:00 Message to Master queued w/err=0: serial=271864 error=0 10:42:05 Received message from Master: op=Filter serial=271865 10:42:05 Color wheel filter change from 0 to 0 10:42:05 FLIGetFilterPos err=0 currentPosition=0 10:42:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:05 Filter is already there-color wheel unchanged 10:42:05 Received message from Master: op=Shutter serial=271866 10:42:05 Shutter LASER open 10:42:06 Received message from Camera: op=State serial=271868 10:42:06 GetSingleValue result=40 Value=cccccccc 10:42:06 SkyScan query 10:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:42:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:06 Parameters OK 10:42:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:06 Set A/D data flow result=40 10:42:06 Set A/D channel type result=40 10:42:06 Set A/D encoding result=40 10:42:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:06 Set channel filter=0.000000e+000 result=40 10:42:06 Config A/D Result=40 10:42:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:06 Get A/D filter: -9.255963e+061 result=40 10:42:06 Get A/D value=-858993460 result=40 10:42:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:06 Parameters OK 10:42:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:06 Set A/D data flow result=40 10:42:06 Set A/D channel type result=40 10:42:06 Set A/D encoding result=40 10:42:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:06 Set channel filter=0.000000e+000 result=40 10:42:06 Config A/D Result=40 10:42:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:06 Get A/D filter: -9.255963e+061 result=40 10:42:06 Get A/D value=-858993460 result=40 10:42:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:06 Aux= 10:42:06 Message to Camera, serial 271868 queued 10:42:15 Received message from Master: op=Shutter serial=271878 10:42:15 Shutter LASER close 10:42:15 Received message from Master: op=PointingHead serial=271882 10:42:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:42:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:42:15 Point started: ret=0 10:42:15 point_skyscan result=0 10:42:16 Check angles 10:42:16 SkyScan query 10:42:17 SkyScan query done: ret=0 az=89.55<-5970 ze=156.795<-1547 Statuses=0009 0009 10:42:17 Msec=0 True Az=89.55 Ze=156.795 Az status=0009 Ze status=0009 10:42:17 Check angles 10:42:17 SkyScan query 10:42:17 SkyScan query done: ret=0 az=72.105<-4807 ze=135.825<-2945 Statuses=0009 0009 10:42:17 Msec=750 True Az=72.105 Ze=135.825 Az status=0009 Ze status=0009 10:42:18 Check angles 10:42:18 SkyScan query 10:42:18 SkyScan query done: ret=0 az=54.3<-3620 ze=114.36<-4376 Statuses=0009 0009 10:42:18 Msec=1500 True Az=54.3 Ze=114.36 Az status=0009 Ze status=0009 10:42:18 Check angles 10:42:18 SkyScan query 10:42:19 SkyScan query done: ret=0 az=40.98<-2732 ze=93.45<-5770 Statuses=0009 0009 10:42:19 Msec=2250 True Az=40.98 Ze=93.45 Az status=0009 Ze status=0009 10:42:19 Check angles 10:42:19 SkyScan query 10:42:20 SkyScan query done: ret=0 az=40.995<-2733 ze=72.465<-7169 Statuses=0008 0009 10:42:20 Msec=3000 True Az=40.995 Ze=72.465 Az status=0008 Ze status=0009 10:42:20 Check angles 10:42:20 SkyScan query 10:42:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.08<-8528 Statuses=0008 0009 10:42:20 Msec=3750 True Az=40.995 Ze=52.08 Az status=0008 Ze status=0009 10:42:21 Check angles 10:42:21 SkyScan query 10:42:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:42:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:42:21 Message to Master queued w/err=0: serial=271882 error=0 10:42:26 Received message from Master: op=Filter serial=271883 10:42:26 Color wheel filter change from 0 to 0 10:42:26 FLIGetFilterPos err=0 currentPosition=0 10:42:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:26 Filter is already there-color wheel unchanged 10:42:26 Received message from Master: op=Shutter serial=271884 10:42:26 Shutter LASER close 10:42:27 Received message from Camera: op=State serial=271886 10:42:27 GetSingleValue result=40 Value=cccccccc 10:42:27 SkyScan query 10:42:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:42:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:27 Parameters OK 10:42:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:27 Set A/D data flow result=40 10:42:27 Set A/D channel type result=40 10:42:27 Set A/D encoding result=40 10:42:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:27 Set channel filter=0.000000e+000 result=40 10:42:27 Config A/D Result=40 10:42:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:27 Get A/D filter: -9.255963e+061 result=40 10:42:27 Get A/D value=-858993460 result=40 10:42:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:27 Parameters OK 10:42:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:27 Set A/D data flow result=40 10:42:27 Set A/D channel type result=40 10:42:27 Set A/D encoding result=40 10:42:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:27 Set channel filter=0.000000e+000 result=40 10:42:27 Config A/D Result=40 10:42:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:27 Get A/D filter: -9.255963e+061 result=40 10:42:27 Get A/D value=-858993460 result=40 10:42:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:27 Aux= 10:42:27 Message to Camera, serial 271886 queued 10:43:04 Received message from Master: op=PointingHead serial=271899 10:43:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:43:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:43:04 Point started: ret=0 10:43:04 point_skyscan result=0 10:43:05 Check angles 10:43:05 SkyScan query 10:43:06 SkyScan query done: ret=0 az=63.975<-4265 ze=66.54<-7564 Statuses=0009 0008 10:43:06 Msec=0 True Az=63.975 Ze=66.54 Az status=0009 Ze status=0008 10:43:06 Check angles 10:43:06 SkyScan query 10:43:06 SkyScan query done: ret=0 az=81.825<-5455 ze=66.51<-7566 Statuses=0009 0008 10:43:06 Msec=750 True Az=81.825 Ze=66.51 Az status=0009 Ze status=0008 10:43:07 Check angles 10:43:07 SkyScan query 10:43:07 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 10:43:07 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 10:43:07 Check angles 10:43:07 SkyScan query 10:43:08 SkyScan query done: ret=0 az=116.745<-7783 ze=66.495<-7567 Statuses=0009 0008 10:43:08 Msec=2250 True Az=116.745 Ze=66.495 Az status=0009 Ze status=0008 10:43:08 Check angles 10:43:08 SkyScan query 10:43:09 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 10:43:09 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 10:43:09 Check angles 10:43:09 SkyScan query 10:43:09 SkyScan query done: ret=0 az=151.935<-10129 ze=66.495<-7567 Statuses=0009 0008 10:43:09 Msec=3750 True Az=151.935 Ze=66.495 Az status=0009 Ze status=0008 10:43:10 Check angles 10:43:10 SkyScan query 10:43:10 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:43:10 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:43:10 Message to Master queued w/err=0: serial=271899 error=0 10:43:15 Received message from Master: op=Filter serial=271900 10:43:15 Color wheel filter change from 0 to 0 10:43:15 FLIGetFilterPos err=0 currentPosition=0 10:43:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:15 Filter is already there-color wheel unchanged 10:43:15 Received message from Master: op=Shutter serial=271901 10:43:15 Shutter LASER close 10:43:16 Received message from Camera: op=State serial=271903 10:43:16 GetSingleValue result=40 Value=cccccccc 10:43:16 SkyScan query 10:43:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:43:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:16 Parameters OK 10:43:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:16 Set A/D data flow result=40 10:43:16 Set A/D channel type result=40 10:43:16 Set A/D encoding result=40 10:43:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:16 Set channel filter=0.000000e+000 result=40 10:43:16 Config A/D Result=40 10:43:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:16 Get A/D filter: -9.255963e+061 result=40 10:43:16 Get A/D value=-858993460 result=40 10:43:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:16 Parameters OK 10:43:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:16 Set A/D data flow result=40 10:43:16 Set A/D channel type result=40 10:43:16 Set A/D encoding result=40 10:43:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:16 Set channel filter=0.000000e+000 result=40 10:43:16 Config A/D Result=40 10:43:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:16 Get A/D filter: -9.255963e+061 result=40 10:43:16 Get A/D value=-858993460 result=40 10:43:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:16 Aux= 10:43:16 Message to Camera, serial 271903 queued 10:43:53 Received message from Master: op=PointingHead serial=271916 10:43:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:43:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:43:53 Point started: ret=0 10:43:53 point_skyscan result=0 10:43:54 Check angles 10:43:54 SkyScan query 10:43:55 SkyScan query done: ret=0 az=134.835<-8989 ze=96.375<-5575 Statuses=0009 0009 10:43:55 Msec=0 True Az=134.835 Ze=96.375 Az status=0009 Ze status=0009 10:43:55 Check angles 10:43:55 SkyScan query 10:43:56 SkyScan query done: ret=0 az=130.995<-8733 ze=117.72<-4152 Statuses=0008 0009 10:43:56 Msec=750 True Az=130.995 Ze=117.72 Az status=0008 Ze status=0009 10:43:56 Check angles 10:43:56 SkyScan query 10:43:56 SkyScan query done: ret=0 az=130.995<-8733 ze=138.69<-2754 Statuses=0008 0009 10:43:56 Msec=1500 True Az=130.995 Ze=138.69 Az status=0008 Ze status=0009 10:43:56 Check angles 10:43:56 SkyScan query 10:43:57 SkyScan query done: ret=0 az=130.995<-8733 ze=160.095<-1327 Statuses=0008 0009 10:43:57 Msec=2250 True Az=130.995 Ze=160.095 Az status=0008 Ze status=0009 10:43:57 Check angles 10:43:57 SkyScan query 10:43:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.95<-23930 Statuses=0008 0009 10:43:58 Msec=3000 True Az=130.995 Ze=-178.95 Az status=0008 Ze status=0009 10:43:58 Check angles 10:43:58 SkyScan query 10:43:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.01<-22534 Statuses=0008 0009 10:43:59 Msec=3750 True Az=130.995 Ze=-158.01 Az status=0008 Ze status=0009 10:43:59 Check angles 10:43:59 SkyScan query 10:43:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 10:43:59 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 10:43:59 Check angles 10:43:59 SkyScan query 10:44:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 10:44:00 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 10:44:00 Message to Master queued w/err=0: serial=271916 error=0 10:44:05 Received message from Master: op=Filter serial=271917 10:44:05 Color wheel filter change from 0 to 0 10:44:05 FLIGetFilterPos err=0 currentPosition=0 10:44:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:05 Filter is already there-color wheel unchanged 10:44:05 Received message from Master: op=Shutter serial=271918 10:44:05 Shutter LASER close 10:44:05 Received message from Camera: op=State serial=271920 10:44:05 GetSingleValue result=40 Value=cccccccc 10:44:05 SkyScan query 10:44:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:44:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:06 Parameters OK 10:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:06 Set A/D data flow result=40 10:44:06 Set A/D channel type result=40 10:44:06 Set A/D encoding result=40 10:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:06 Set channel filter=0.000000e+000 result=40 10:44:06 Config A/D Result=40 10:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:06 Get A/D filter: -9.255963e+061 result=40 10:44:06 Get A/D value=-858993460 result=40 10:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:06 Parameters OK 10:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:06 Set A/D data flow result=40 10:44:06 Set A/D channel type result=40 10:44:06 Set A/D encoding result=40 10:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:06 Set channel filter=0.000000e+000 result=40 10:44:06 Config A/D Result=40 10:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:06 Get A/D filter: -9.255963e+061 result=40 10:44:06 Get A/D value=-858993460 result=40 10:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:06 Aux= 10:44:06 Message to Camera, serial 271920 queued 10:44:43 Received message from Master: op=PointingHead serial=271933 10:44:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:44:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:44:43 Point started: ret=0 10:44:43 point_skyscan result=0 10:44:44 Check angles 10:44:44 SkyScan query 10:44:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 10:44:44 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 10:44:45 Check angles 10:44:45 SkyScan query 10:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:44:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:44:45 Message to Master queued w/err=0: serial=271933 error=0 10:44:50 Received message from Master: op=Filter serial=271934 10:44:50 Color wheel filter change from 0 to 0 10:44:50 FLIGetFilterPos err=0 currentPosition=0 10:44:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:50 Filter is already there-color wheel unchanged 10:44:50 Received message from Master: op=Shutter serial=271935 10:44:50 Shutter LASER open 10:44:50 Received message from Camera: op=State serial=271937 10:44:50 GetSingleValue result=40 Value=cccccccc 10:44:50 SkyScan query 10:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:44:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:51 Parameters OK 10:44:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:51 Set A/D data flow result=40 10:44:51 Set A/D channel type result=40 10:44:51 Set A/D encoding result=40 10:44:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:51 Set channel filter=0.000000e+000 result=40 10:44:51 Config A/D Result=40 10:44:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:51 Get A/D filter: -9.255963e+061 result=40 10:44:51 Get A/D value=-858993460 result=40 10:44:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:51 Parameters OK 10:44:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:51 Set A/D data flow result=40 10:44:51 Set A/D channel type result=40 10:44:51 Set A/D encoding result=40 10:44:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:51 Set channel filter=0.000000e+000 result=40 10:44:51 Config A/D Result=40 10:44:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:51 Get A/D filter: -9.255963e+061 result=40 10:44:51 Get A/D value=-858993460 result=40 10:44:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:51 Aux= 10:44:51 Message to Camera, serial 271937 queued 10:44:59 Received message from Master: op=Shutter serial=271947 10:45:00 Shutter LASER close 10:45:00 Received message from Master: op=PointingHead serial=271951 10:45:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:45:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:45:00 Point started: ret=0 10:45:00 point_skyscan result=0 10:45:01 Check angles 10:45:01 SkyScan query 10:45:02 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.175<-21545 Statuses=0009 0009 10:45:02 Msec=0 True Az=136.095 Ze=-143.175 Az status=0009 Ze status=0009 10:45:02 Check angles 10:45:02 SkyScan query 10:45:03 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.815<-20121 Statuses=0009 0009 10:45:03 Msec=750 True Az=153.9 Ze=-121.815 Az status=0009 Ze status=0009 10:45:03 Check angles 10:45:03 SkyScan query 10:45:03 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.8<-18720 Statuses=0009 0009 10:45:03 Msec=1500 True Az=171.375 Ze=-100.8 Az status=0009 Ze status=0009 10:45:03 Check angles 10:45:03 SkyScan query 10:45:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.905<-17327 Statuses=0008 0009 10:45:04 Msec=2250 True Az=176.01 Ze=-79.905 Az status=0008 Ze status=0009 10:45:04 Check angles 10:45:04 SkyScan query 10:45:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.905<-15927 Statuses=0008 0009 10:45:05 Msec=3000 True Az=175.995 Ze=-58.905 Az status=0008 Ze status=0009 10:45:05 Check angles 10:45:05 SkyScan query 10:45:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 10:45:06 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 10:45:06 Message to Master queued w/err=0: serial=271951 error=0 10:45:11 Received message from Master: op=Filter serial=271952 10:45:11 Color wheel filter change from 0 to 0 10:45:11 FLIGetFilterPos err=0 currentPosition=0 10:45:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:11 Filter is already there-color wheel unchanged 10:45:11 Received message from Master: op=Shutter serial=271953 10:45:11 Shutter LASER close 10:45:11 Received message from Camera: op=State serial=271955 10:45:11 GetSingleValue result=40 Value=cccccccc 10:45:11 SkyScan query 10:45:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:45:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:11 Parameters OK 10:45:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:11 Set A/D data flow result=40 10:45:11 Set A/D channel type result=40 10:45:11 Set A/D encoding result=40 10:45:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:11 Set channel filter=0.000000e+000 result=40 10:45:11 Config A/D Result=40 10:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:11 Get A/D filter: -9.255963e+061 result=40 10:45:11 Get A/D value=-858993460 result=40 10:45:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:11 Parameters OK [UTC 2018-12-19 10:45:11] 10:45:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:12 Set A/D data flow result=40 10:45:12 Set A/D channel type result=40 10:45:12 Set A/D encoding result=40 10:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:12 Set channel filter=0.000000e+000 result=40 10:45:12 Config A/D Result=40 10:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:12 Get A/D filter: -9.255963e+061 result=40 10:45:12 Get A/D value=-858993460 result=40 10:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:12 Aux= 10:45:12 Message to Camera, serial 271955 queued 10:45:27 Received message from Master: op=Identify serial=271956 10:45:48 Received message from Master: op=PointingHead serial=271971 10:45:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:45:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:45:49 Point started: ret=0 10:45:49 point_skyscan result=0 10:45:49 Check angles 10:45:49 SkyScan query 10:45:50 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.225<-13415 Statuses=0009 0009 10:45:50 Msec=0 True Az=152.58 Ze=-21.225 Az status=0009 Ze status=0009 10:45:50 Check angles 10:45:50 SkyScan query 10:45:51 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.3<-12020 Statuses=0009 0009 10:45:51 Msec=750 True Az=135.105 Ze=-0.3 Az status=0009 Ze status=0009 10:45:51 Check angles 10:45:51 SkyScan query 10:45:51 SkyScan query done: ret=0 az=117.63<-7842 ze=20.67<-10622 Statuses=0009 0009 10:45:51 Msec=1500 True Az=117.63 Ze=20.67 Az status=0009 Ze status=0009 10:45:52 Check angles 10:45:52 SkyScan query 10:45:52 SkyScan query done: ret=0 az=99.81<-6654 ze=42.03<-9198 Statuses=0009 0009 10:45:52 Msec=2250 True Az=99.81 Ze=42.03 Az status=0009 Ze status=0009 10:45:52 Check angles 10:45:52 SkyScan query 10:45:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 10:45:53 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 10:45:53 Check angles 10:45:53 SkyScan query 10:45:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:45:54 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 10:45:54 Message to Master queued w/err=0: serial=271971 error=0 10:45:59 Received message from Master: op=Filter serial=271972 10:45:59 Color wheel filter change from 0 to 0 10:45:59 FLIGetFilterPos err=0 currentPosition=0 10:45:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:59 Filter is already there-color wheel unchanged 10:45:59 Received message from Master: op=Shutter serial=271973 10:45:59 Shutter LASER close 10:45:59 Received message from Camera: op=State serial=271975 10:45:59 GetSingleValue result=40 Value=cccccccc 10:45:59 SkyScan query 10:46:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:46:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:00 Parameters OK 10:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:00 Set A/D data flow result=40 10:46:00 Set A/D channel type result=40 10:46:00 Set A/D encoding result=40 10:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:00 Set channel filter=0.000000e+000 result=40 10:46:00 Config A/D Result=40 10:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:00 Get A/D filter: -9.255963e+061 result=40 10:46:00 Get A/D value=-858993460 result=40 10:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:00 Parameters OK 10:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:00 Set A/D data flow result=40 10:46:00 Set A/D channel type result=40 10:46:00 Set A/D encoding result=40 10:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:00 Set channel filter=0.000000e+000 result=40 10:46:00 Config A/D Result=40 10:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:00 Get A/D filter: -9.255963e+061 result=40 10:46:00 Get A/D value=-858993460 result=40 10:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:00 Aux= 10:46:00 Message to Camera, serial 271975 queued 10:46:36 Received message from Master: op=PointingHead serial=271988 10:46:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:46:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:46:37 Point started: ret=0 10:46:37 point_skyscan result=0 10:46:37 Check angles 10:46:37 SkyScan query 10:46:38 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 10:46:38 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 10:46:38 Check angles 10:46:38 SkyScan query 10:46:39 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 10:46:39 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 10:46:39 Check angles 10:46:39 SkyScan query 10:46:40 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 10:46:40 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 10:46:40 Check angles 10:46:40 SkyScan query 10:46:40 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 10:46:40 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 10:46:40 Check angles 10:46:40 SkyScan query 10:46:41 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:46:41 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:46:41 Check angles 10:46:41 SkyScan query 10:46:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:46:42 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:46:42 Message to Master queued w/err=0: serial=271988 error=0 10:46:47 Received message from Master: op=Filter serial=271989 10:46:47 Color wheel filter change from 0 to 0 10:46:47 FLIGetFilterPos err=0 currentPosition=0 10:46:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:47 Filter is already there-color wheel unchanged 10:46:47 Received message from Master: op=Shutter serial=271990 10:46:47 Shutter LASER close 10:46:47 Received message from Camera: op=State serial=271992 10:46:47 GetSingleValue result=40 Value=cccccccc 10:46:47 SkyScan query 10:46:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:46:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:48 Parameters OK 10:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:48 Set A/D data flow result=40 10:46:48 Set A/D channel type result=40 10:46:48 Set A/D encoding result=40 10:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:48 Set channel filter=0.000000e+000 result=40 10:46:48 Config A/D Result=40 10:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:48 Get A/D filter: -9.255963e+061 result=40 10:46:48 Get A/D value=-858993460 result=40 10:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:48 Parameters OK 10:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:48 Set A/D data flow result=40 10:46:48 Set A/D channel type result=40 10:46:48 Set A/D encoding result=40 10:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:48 Set channel filter=0.000000e+000 result=40 10:46:48 Config A/D Result=40 10:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:48 Get A/D filter: -9.255963e+061 result=40 10:46:48 Get A/D value=-858993460 result=40 10:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:48 Aux= 10:46:48 Message to Camera, serial 271992 queued 10:47:24 Received message from Master: op=PointingHead serial=272005 10:47:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:47:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:47:25 Point started: ret=0 10:47:25 point_skyscan result=0 10:47:26 Check angles 10:47:26 SkyScan query 10:47:26 SkyScan query done: ret=0 az=152.745<-10183 ze=68.64<-7424 Statuses=0009 0009 10:47:26 Msec=0 True Az=152.745 Ze=68.64 Az status=0009 Ze status=0009 10:47:26 Check angles 10:47:26 SkyScan query 10:47:27 SkyScan query done: ret=0 az=135.255<-9017 ze=89.67<-6022 Statuses=0009 0009 10:47:27 Msec=750 True Az=135.255 Ze=89.67 Az status=0009 Ze status=0009 10:47:27 Check angles 10:47:27 SkyScan query 10:47:28 SkyScan query done: ret=0 az=117.45<-7830 ze=110.985<-4601 Statuses=0009 0009 10:47:28 Msec=1500 True Az=117.45 Ze=110.985 Az status=0009 Ze status=0009 10:47:28 Check angles 10:47:28 SkyScan query 10:47:28 SkyScan query done: ret=0 az=112.995<-7533 ze=132.36<-3176 Statuses=0008 0009 10:47:28 Msec=2250 True Az=112.995 Ze=132.36 Az status=0008 Ze status=0009 10:47:29 Check angles 10:47:29 SkyScan query 10:47:29 SkyScan query done: ret=0 az=112.995<-7533 ze=153.78<-1748 Statuses=0008 0009 10:47:29 Msec=3000 True Az=112.995 Ze=153.78 Az status=0008 Ze status=0009 10:47:29 Check angles 10:47:29 SkyScan query 10:47:30 SkyScan query done: ret=0 az=112.995<-7533 ze=174.72<-352 Statuses=0008 0009 10:47:30 Msec=3750 True Az=112.995 Ze=174.72 Az status=0008 Ze status=0009 10:47:30 Check angles 10:47:30 SkyScan query 10:47:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 10:47:31 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 10:47:31 Message to Master queued w/err=0: serial=272005 error=0 10:47:36 Received message from Master: op=Filter serial=272006 10:47:36 Color wheel filter change from 0 to 0 10:47:36 FLIGetFilterPos err=0 currentPosition=0 10:47:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:36 Filter is already there-color wheel unchanged 10:47:36 Received message from Master: op=Shutter serial=272007 10:47:36 Shutter LASER open 10:47:36 Received message from Camera: op=State serial=272009 10:47:36 GetSingleValue result=40 Value=cccccccc 10:47:36 SkyScan query 10:47:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:47:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:37 Parameters OK 10:47:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:37 Set A/D data flow result=40 10:47:37 Set A/D channel type result=40 10:47:37 Set A/D encoding result=40 10:47:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:37 Set channel filter=0.000000e+000 result=40 10:47:37 Config A/D Result=40 10:47:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:37 Get A/D filter: -9.255963e+061 result=40 10:47:37 Get A/D value=-858993460 result=40 10:47:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:37 Parameters OK 10:47:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:37 Set A/D data flow result=40 10:47:37 Set A/D channel type result=40 10:47:37 Set A/D encoding result=40 10:47:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:37 Set channel filter=0.000000e+000 result=40 10:47:37 Config A/D Result=40 10:47:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:37 Get A/D filter: -9.255963e+061 result=40 10:47:37 Get A/D value=-858993460 result=40 10:47:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:37 Aux= 10:47:37 Message to Camera, serial 272009 queued 10:47:44 Received message from Master: op=Shutter serial=272018 10:47:44 Shutter LASER close 10:47:45 Received message from Master: op=PointingHead serial=272022 10:47:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:47:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:47:45 Point started: ret=0 10:47:45 point_skyscan result=0 10:47:46 Check angles 10:47:46 SkyScan query 10:47:46 SkyScan query done: ret=0 az=89.82<-5988 ze=157.41<-1506 Statuses=0009 0009 10:47:46 Msec=0 True Az=89.82 Ze=157.41 Az status=0009 Ze status=0009 10:47:46 Check angles 10:47:46 SkyScan query 10:47:47 SkyScan query done: ret=0 az=72.06<-4804 ze=135.99<-2934 Statuses=0009 0009 10:47:47 Msec=750 True Az=72.06 Ze=135.99 Az status=0009 Ze status=0009 10:47:47 Check angles 10:47:47 SkyScan query 10:47:48 SkyScan query done: ret=0 az=54.555<-3637 ze=115.065<-4329 Statuses=0009 0009 10:47:48 Msec=1500 True Az=54.555 Ze=115.065 Az status=0009 Ze status=0009 10:47:48 Check angles 10:47:48 SkyScan query 10:47:49 SkyScan query done: ret=0 az=40.98<-2732 ze=94.05<-5730 Statuses=0009 0009 10:47:49 Msec=2250 True Az=40.98 Ze=94.05 Az status=0009 Ze status=0009 10:47:49 Check angles 10:47:49 SkyScan query 10:47:49 SkyScan query done: ret=0 az=40.995<-2733 ze=73.095<-7127 Statuses=0008 0009 10:47:49 Msec=3000 True Az=40.995 Ze=73.095 Az status=0008 Ze status=0009 10:47:49 Check angles 10:47:49 SkyScan query 10:47:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.635<-8491 Statuses=0008 0009 10:47:50 Msec=3750 True Az=40.995 Ze=52.635 Az status=0008 Ze status=0009 10:47:50 Check angles 10:47:50 SkyScan query 10:47:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:47:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:47:51 Message to Master queued w/err=0: serial=272022 error=0 10:47:56 Received message from Master: op=Filter serial=272023 10:47:56 Color wheel filter change from 0 to 0 10:47:56 FLIGetFilterPos err=0 currentPosition=0 10:47:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:56 Filter is already there-color wheel unchanged 10:47:56 Received message from Master: op=Shutter serial=272024 10:47:56 Shutter LASER close 10:47:56 Received message from Camera: op=State serial=272026 10:47:56 GetSingleValue result=40 Value=cccccccc 10:47:56 SkyScan query 10:47:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:47:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:57 Parameters OK 10:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:57 Set A/D data flow result=40 10:47:57 Set A/D channel type result=40 10:47:57 Set A/D encoding result=40 10:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:57 Set channel filter=0.000000e+000 result=40 10:47:57 Config A/D Result=40 10:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:57 Get A/D filter: -9.255963e+061 result=40 10:47:57 Get A/D value=-858993460 result=40 10:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:57 Parameters OK 10:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:57 Set A/D data flow result=40 10:47:57 Set A/D channel type result=40 10:47:57 Set A/D encoding result=40 10:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:57 Set channel filter=0.000000e+000 result=40 10:47:57 Config A/D Result=40 10:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:57 Get A/D filter: -9.255963e+061 result=40 10:47:57 Get A/D value=-858993460 result=40 10:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:57 Aux= 10:47:57 Message to Camera, serial 272026 queued 10:48:34 Received message from Master: op=PointingHead serial=272039 10:48:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:48:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:48:34 Point started: ret=0 10:48:34 point_skyscan result=0 10:48:35 Check angles 10:48:35 SkyScan query 10:48:35 SkyScan query done: ret=0 az=64.05<-4270 ze=66.555<-7563 Statuses=0009 0008 10:48:35 Msec=0 True Az=64.05 Ze=66.555 Az status=0009 Ze status=0008 10:48:35 Check angles 10:48:35 SkyScan query 10:48:36 SkyScan query done: ret=0 az=81.9<-5460 ze=66.51<-7566 Statuses=0009 0008 10:48:36 Msec=750 True Az=81.9 Ze=66.51 Az status=0009 Ze status=0008 10:48:36 Check angles 10:48:36 SkyScan query 10:48:37 SkyScan query done: ret=0 az=99.87<-6658 ze=66.495<-7567 Statuses=0009 0008 10:48:37 Msec=1500 True Az=99.87 Ze=66.495 Az status=0009 Ze status=0008 10:48:37 Check angles 10:48:37 SkyScan query 10:48:37 SkyScan query done: ret=0 az=117.27<-7818 ze=66.495<-7567 Statuses=0009 0008 10:48:37 Msec=2250 True Az=117.27 Ze=66.495 Az status=0009 Ze status=0008 10:48:38 Check angles 10:48:38 SkyScan query 10:48:38 SkyScan query done: ret=0 az=134.7<-8980 ze=66.495<-7567 Statuses=0009 0008 10:48:38 Msec=3000 True Az=134.7 Ze=66.495 Az status=0009 Ze status=0008 10:48:38 Check angles 10:48:38 SkyScan query 10:48:39 SkyScan query done: ret=0 az=152.415<-10161 ze=66.495<-7567 Statuses=0009 0008 10:48:39 Msec=3750 True Az=152.415 Ze=66.495 Az status=0009 Ze status=0008 10:48:39 Check angles 10:48:39 SkyScan query 10:48:40 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:48:40 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:48:40 Message to Master queued w/err=0: serial=272039 error=0 10:48:45 Received message from Master: op=Filter serial=272040 10:48:45 Color wheel filter change from 0 to 0 10:48:45 FLIGetFilterPos err=0 currentPosition=0 10:48:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:45 Filter is already there-color wheel unchanged 10:48:45 Received message from Master: op=Shutter serial=272041 10:48:45 Shutter LASER close 10:48:45 Received message from Camera: op=State serial=272043 10:48:45 GetSingleValue result=40 Value=cccccccc 10:48:45 SkyScan query 10:48:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:48:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:46 Parameters OK 10:48:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:46 Set A/D data flow result=40 10:48:46 Set A/D channel type result=40 10:48:46 Set A/D encoding result=40 10:48:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:46 Set channel filter=0.000000e+000 result=40 10:48:46 Config A/D Result=40 10:48:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:46 Get A/D filter: -9.255963e+061 result=40 10:48:46 Get A/D value=-858993460 result=40 10:48:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:46 Parameters OK 10:48:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:46 Set A/D data flow result=40 10:48:46 Set A/D channel type result=40 10:48:46 Set A/D encoding result=40 10:48:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:46 Set channel filter=0.000000e+000 result=40 10:48:46 Config A/D Result=40 10:48:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:46 Get A/D filter: -9.255963e+061 result=40 10:48:46 Get A/D value=-858993460 result=40 10:48:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:46 Aux= 10:48:46 Message to Camera, serial 272043 queued 10:49:23 Received message from Master: op=PointingHead serial=272056 10:49:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:49:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:49:23 Point started: ret=0 10:49:23 point_skyscan result=0 10:49:24 Check angles 10:49:24 SkyScan query 10:49:24 SkyScan query done: ret=0 az=134.625<-8975 ze=96.57<-5562 Statuses=0009 0009 10:49:24 Msec=0 True Az=134.625 Ze=96.57 Az status=0009 Ze status=0009 10:49:24 Check angles 10:49:24 SkyScan query 10:49:25 SkyScan query done: ret=0 az=130.995<-8733 ze=117.48<-4168 Statuses=0008 0009 10:49:25 Msec=750 True Az=130.995 Ze=117.48 Az status=0008 Ze status=0009 10:49:25 Check angles 10:49:25 SkyScan query 10:49:26 SkyScan query done: ret=0 az=130.995<-8733 ze=138.885<-2741 Statuses=0008 0009 10:49:26 Msec=1500 True Az=130.995 Ze=138.885 Az status=0008 Ze status=0009 10:49:26 Check angles 10:49:26 SkyScan query 10:49:27 SkyScan query done: ret=0 az=130.995<-8733 ze=160.29<-1314 Statuses=0008 0009 10:49:27 Msec=2250 True Az=130.995 Ze=160.29 Az status=0008 Ze status=0009 10:49:27 Check angles 10:49:27 SkyScan query 10:49:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.32<-23888 Statuses=0008 0009 10:49:27 Msec=3000 True Az=130.995 Ze=-178.32 Az status=0008 Ze status=0009 10:49:28 Check angles 10:49:28 SkyScan query 10:49:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.41<-22494 Statuses=0008 0009 10:49:28 Msec=3750 True Az=130.995 Ze=-157.41 Az status=0008 Ze status=0009 10:49:28 Check angles 10:49:28 SkyScan query 10:49:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 10:49:29 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 10:49:29 Check angles 10:49:29 SkyScan query 10:49:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 10:49:30 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 10:49:30 Message to Master queued w/err=0: serial=272056 error=0 10:49:35 Received message from Master: op=Filter serial=272057 10:49:35 Color wheel filter change from 0 to 0 10:49:35 FLIGetFilterPos err=0 currentPosition=0 10:49:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:35 Filter is already there-color wheel unchanged 10:49:35 Received message from Master: op=Shutter serial=272058 10:49:35 Shutter LASER close 10:49:35 Received message from Camera: op=State serial=272060 10:49:35 GetSingleValue result=40 Value=cccccccc 10:49:35 SkyScan query 10:49:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:49:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:35 Parameters OK 10:49:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:35 Set A/D data flow result=40 10:49:35 Set A/D channel type result=40 10:49:35 Set A/D encoding result=40 10:49:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:35 Set channel filter=0.000000e+000 result=40 10:49:35 Config A/D Result=40 10:49:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:35 Get A/D filter: -9.255963e+061 result=40 10:49:35 Get A/D value=-858993460 result=40 10:49:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:35 Parameters OK 10:49:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:35 Set A/D data flow result=40 10:49:35 Set A/D channel type result=40 10:49:35 Set A/D encoding result=40 10:49:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:35 Set channel filter=0.000000e+000 result=40 10:49:35 Config A/D Result=40 10:49:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:35 Get A/D filter: -9.255963e+061 result=40 10:49:35 Get A/D value=-858993460 result=40 10:49:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:35 Aux= 10:49:35 Message to Camera, serial 272060 queued 10:50:12 Received message from Master: op=PointingHead serial=272073 10:50:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:50:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:50:13 Point started: ret=0 10:50:13 point_skyscan result=0 10:50:13 Check angles 10:50:13 SkyScan query 10:50:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0009 0009 10:50:14 Msec=0 True Az=112.995 Ze=-171.345 Az status=0009 Ze status=0009 10:50:14 Check angles 10:50:14 SkyScan query 10:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:50:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:50:15 Message to Master queued w/err=0: serial=272073 error=0 10:50:20 Received message from Master: op=Filter serial=272074 10:50:20 Color wheel filter change from 0 to 0 10:50:20 FLIGetFilterPos err=0 currentPosition=0 10:50:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:20 Filter is already there-color wheel unchanged 10:50:20 Received message from Master: op=Shutter serial=272075 10:50:20 Shutter LASER open 10:50:20 Received message from Camera: op=State serial=272077 10:50:20 GetSingleValue result=40 Value=cccccccc 10:50:20 SkyScan query 10:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:50:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:21 Parameters OK 10:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:21 Set A/D data flow result=40 10:50:21 Set A/D channel type result=40 10:50:21 Set A/D encoding result=40 10:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:21 Set channel filter=0.000000e+000 result=40 10:50:21 Config A/D Result=40 10:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:21 Get A/D filter: -9.255963e+061 result=40 10:50:21 Get A/D value=-858993460 result=40 10:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:21 Parameters OK 10:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:21 Set A/D data flow result=40 10:50:21 Set A/D channel type result=40 10:50:21 Set A/D encoding result=40 10:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:21 Set channel filter=0.000000e+000 result=40 10:50:21 Config A/D Result=40 10:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:21 Get A/D filter: -9.255963e+061 result=40 10:50:21 Get A/D value=-858993460 result=40 10:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:21 Aux= 10:50:21 Message to Camera, serial 272077 queued 10:50:29 Received message from Master: op=Shutter serial=272087 10:50:29 Shutter LASER close 10:50:30 Received message from Master: op=PointingHead serial=272091 10:50:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:50:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:50:30 Point started: ret=0 10:50:30 point_skyscan result=0 10:50:31 Check angles 10:50:31 SkyScan query 10:50:31 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.34<-21556 Statuses=0009 0009 10:50:31 Msec=0 True Az=136.095 Ze=-143.34 Az status=0009 Ze status=0009 10:50:31 Check angles 10:50:31 SkyScan query 10:50:32 SkyScan query done: ret=0 az=153.975<-10265 ze=-121.95<-20130 Statuses=0009 0009 10:50:32 Msec=750 True Az=153.975 Ze=-121.95 Az status=0009 Ze status=0009 10:50:32 Check angles 10:50:32 SkyScan query 10:50:33 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.935<-18729 Statuses=0009 0009 10:50:33 Msec=1500 True Az=171.45 Ze=-100.935 Az status=0009 Ze status=0009 10:50:33 Check angles 10:50:33 SkyScan query 10:50:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.055<-17337 Statuses=0008 0009 10:50:34 Msec=2250 True Az=176.01 Ze=-80.055 Az status=0008 Ze status=0009 10:50:34 Check angles 10:50:34 SkyScan query 10:50:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.545<-15903 Statuses=0008 0009 10:50:34 Msec=3000 True Az=176.01 Ze=-58.545 Az status=0008 Ze status=0009 10:50:34 Check angles 10:50:34 SkyScan query 10:50:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 10:50:35 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 10:50:35 Message to Master queued w/err=0: serial=272091 error=0 10:50:40 Received message from Master: op=Filter serial=272092 10:50:40 Color wheel filter change from 0 to 0 10:50:40 FLIGetFilterPos err=0 currentPosition=0 10:50:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:40 Filter is already there-color wheel unchanged 10:50:40 Received message from Master: op=Shutter serial=272093 10:50:40 Shutter LASER close 10:50:40 Received message from Camera: op=State serial=272095 10:50:40 GetSingleValue result=40 Value=cccccccc 10:50:40 SkyScan query 10:50:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:50:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:41 Parameters OK 10:50:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:41 Set A/D data flow result=40 10:50:41 Set A/D channel type result=40 10:50:41 Set A/D encoding result=40 10:50:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:41 Set channel filter=0.000000e+000 result=40 10:50:41 Config A/D Result=40 10:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:41 Get A/D filter: -9.255963e+061 result=40 10:50:41 Get A/D value=-858993460 result=40 10:50:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:41 Parameters OK 10:50:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:41 Set A/D data flow result=40 10:50:41 Set A/D channel type result=40 10:50:41 Set A/D encoding result=40 10:50:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:41 Set channel filter=0.000000e+000 result=40 10:50:41 Config A/D Result=40 10:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:41 Get A/D filter: -9.255963e+061 result=40 10:50:41 Get A/D value=-858993460 result=40 10:50:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:41 Aux= 10:50:41 Message to Camera, serial 272095 queued 10:51:18 Received message from Master: op=PointingHead serial=272108 10:51:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:51:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:51:18 Point started: ret=0 10:51:18 point_skyscan result=0 10:51:19 Check angles 10:51:19 SkyScan query 10:51:19 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.75<-13450 Statuses=0009 0009 10:51:19 Msec=0 True Az=152.955 Ze=-21.75 Az status=0009 Ze status=0009 10:51:20 Check angles 10:51:20 SkyScan query 10:51:20 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.345<-12023 Statuses=0009 0009 10:51:20 Msec=750 True Az=135.135 Ze=-0.345 Az status=0009 Ze status=0009 10:51:20 Check angles 10:51:20 SkyScan query 10:51:21 SkyScan query done: ret=0 az=117.63<-7842 ze=20.64<-10624 Statuses=0009 0009 10:51:21 Msec=1500 True Az=117.63 Ze=20.64 Az status=0009 Ze status=0009 10:51:21 Check angles 10:51:21 SkyScan query 10:51:22 SkyScan query done: ret=0 az=100.29<-6686 ze=41.58<-9228 Statuses=0009 0009 10:51:22 Msec=2250 True Az=100.29 Ze=41.58 Az status=0009 Ze status=0009 10:51:22 Check angles 10:51:22 SkyScan query 10:51:23 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:51:23 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:51:23 Check angles 10:51:23 SkyScan query 10:51:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 10:51:23 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 10:51:23 Message to Master queued w/err=0: serial=272108 error=0 10:51:28 Received message from Master: op=Filter serial=272109 10:51:28 Color wheel filter change from 0 to 0 10:51:28 FLIGetFilterPos err=0 currentPosition=0 10:51:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:28 Filter is already there-color wheel unchanged 10:51:28 Received message from Master: op=Shutter serial=272110 10:51:28 Shutter LASER close 10:51:28 Received message from Camera: op=State serial=272112 10:51:28 GetSingleValue result=40 Value=cccccccc 10:51:28 SkyScan query 10:51:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 10:51:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:29 Parameters OK 10:51:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:29 Set A/D data flow result=40 10:51:29 Set A/D channel type result=40 10:51:29 Set A/D encoding result=40 10:51:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:29 Set channel filter=0.000000e+000 result=40 10:51:29 Config A/D Result=40 10:51:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:29 Get A/D filter: -9.255963e+061 result=40 10:51:29 Get A/D value=-858993460 result=40 10:51:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:29 Parameters OK 10:51:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:29 Set A/D data flow result=40 10:51:29 Set A/D channel type result=40 10:51:29 Set A/D encoding result=40 10:51:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:29 Set channel filter=0.000000e+000 result=40 10:51:29 Config A/D Result=40 10:51:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:29 Get A/D filter: -9.255963e+061 result=40 10:51:29 Get A/D value=-858993460 result=40 10:51:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:29 Aux= 10:51:29 Message to Camera, serial 272112 queued 10:52:06 Received message from Master: op=PointingHead serial=272125 10:52:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:52:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:52:06 Point started: ret=0 10:52:06 point_skyscan result=0 10:52:07 Check angles 10:52:07 SkyScan query 10:52:08 SkyScan query done: ret=0 az=109.395<-7293 ze=38.475<-9435 Statuses=0009 0008 10:52:08 Msec=0 True Az=109.395 Ze=38.475 Az status=0009 Ze status=0008 10:52:08 Check angles 10:52:08 SkyScan query 10:52:08 SkyScan query done: ret=0 az=127.02<-8468 ze=38.505<-9433 Statuses=0009 0008 10:52:08 Msec=750 True Az=127.02 Ze=38.505 Az status=0009 Ze status=0008 10:52:09 Check angles 10:52:09 SkyScan query 10:52:09 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 10:52:09 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 10:52:09 Check angles 10:52:09 SkyScan query 10:52:10 SkyScan query done: ret=0 az=162.045<-10803 ze=38.505<-9433 Statuses=0009 0008 10:52:10 Msec=2250 True Az=162.045 Ze=38.505 Az status=0009 Ze status=0008 10:52:10 Check angles 10:52:10 SkyScan query 10:52:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:52:11 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:52:11 Check angles 10:52:11 SkyScan query 10:52:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:52:11 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:52:11 Message to Master queued w/err=0: serial=272125 error=0 10:52:16 Received message from Master: op=Filter serial=272126 10:52:16 Color wheel filter change from 0 to 0 10:52:16 FLIGetFilterPos err=0 currentPosition=0 10:52:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:16 Filter is already there-color wheel unchanged 10:52:17 Received message from Master: op=Shutter serial=272127 10:52:17 Shutter LASER close 10:52:17 Received message from Camera: op=State serial=272129 10:52:17 GetSingleValue result=40 Value=cccccccc 10:52:17 SkyScan query 10:52:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:52:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:17 Parameters OK 10:52:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:17 Set A/D data flow result=40 10:52:17 Set A/D channel type result=40 10:52:17 Set A/D encoding result=40 10:52:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:17 Set channel filter=0.000000e+000 result=40 10:52:17 Config A/D Result=40 10:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:17 Get A/D filter: -9.255963e+061 result=40 10:52:17 Get A/D value=-858993460 result=40 10:52:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:17 Parameters OK 10:52:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:17 Set A/D data flow result=40 10:52:17 Set A/D channel type result=40 10:52:17 Set A/D encoding result=40 10:52:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:17 Set channel filter=0.000000e+000 result=40 10:52:17 Config A/D Result=40 10:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:17 Get A/D filter: -9.255963e+061 result=40 10:52:17 Get A/D value=-858993460 result=40 10:52:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:17 Aux= 10:52:17 Message to Camera, serial 272129 queued 10:52:54 Received message from Master: op=PointingHead serial=272142 10:52:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:52:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:52:55 Point started: ret=0 10:52:55 point_skyscan result=0 10:52:55 Check angles 10:52:55 SkyScan query 10:52:56 SkyScan query done: ret=0 az=152.91<-10194 ze=68.445<-7437 Statuses=0009 0009 10:52:56 Msec=0 True Az=152.91 Ze=68.445 Az status=0009 Ze status=0009 10:52:56 Check angles 10:52:56 SkyScan query 10:52:57 SkyScan query done: ret=0 az=135.39<-9026 ze=89.52<-6032 Statuses=0009 0009 10:52:57 Msec=750 True Az=135.39 Ze=89.52 Az status=0009 Ze status=0009 10:52:57 Check angles 10:52:57 SkyScan query 10:52:57 SkyScan query done: ret=0 az=117.54<-7836 ze=110.79<-4614 Statuses=0009 0009 10:52:57 Msec=1500 True Az=117.54 Ze=110.79 Az status=0009 Ze status=0009 10:52:58 Check angles 10:52:58 SkyScan query 10:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=131.775<-3215 Statuses=0008 0009 10:52:58 Msec=2250 True Az=112.995 Ze=131.775 Az status=0008 Ze status=0009 10:52:58 Check angles 10:52:58 SkyScan query 10:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=152.73<-1818 Statuses=0008 0009 10:52:59 Msec=3000 True Az=112.995 Ze=152.73 Az status=0008 Ze status=0009 10:52:59 Check angles 10:52:59 SkyScan query 10:53:00 SkyScan query done: ret=0 az=112.995<-7533 ze=174.12<-392 Statuses=0008 0009 10:53:00 Msec=3750 True Az=112.995 Ze=174.12 Az status=0008 Ze status=0009 10:53:00 Check angles 10:53:00 SkyScan query 10:53:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 10:53:00 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 10:53:00 Message to Master queued w/err=0: serial=272142 error=0 10:53:05 Received message from Master: op=Filter serial=272143 10:53:05 Color wheel filter change from 0 to 0 10:53:05 FLIGetFilterPos err=0 currentPosition=0 10:53:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:05 Filter is already there-color wheel unchanged 10:53:06 Received message from Master: op=Shutter serial=272144 10:53:06 Shutter LASER open 10:53:06 Received message from Camera: op=State serial=272146 10:53:06 GetSingleValue result=40 Value=cccccccc 10:53:06 SkyScan query 10:53:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:53:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:06 Parameters OK 10:53:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:06 Set A/D data flow result=40 10:53:06 Set A/D channel type result=40 10:53:06 Set A/D encoding result=40 10:53:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:06 Set channel filter=0.000000e+000 result=40 10:53:06 Config A/D Result=40 10:53:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:06 Get A/D filter: -9.255963e+061 result=40 10:53:06 Get A/D value=-858993460 result=40 10:53:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:06 Parameters OK 10:53:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:06 Set A/D data flow result=40 10:53:06 Set A/D channel type result=40 10:53:06 Set A/D encoding result=40 10:53:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:06 Set channel filter=0.000000e+000 result=40 10:53:06 Config A/D Result=40 10:53:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:06 Get A/D filter: -9.255963e+061 result=40 10:53:06 Get A/D value=-858993460 result=40 10:53:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:06 Aux= 10:53:06 Message to Camera, serial 272146 queued 10:53:15 Received message from Master: op=Shutter serial=272156 10:53:15 Shutter LASER close 10:53:15 Received message from Master: op=PointingHead serial=272160 10:53:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:53:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:53:16 Point started: ret=0 10:53:16 point_skyscan result=0 10:53:16 Check angles 10:53:16 SkyScan query 10:53:17 SkyScan query done: ret=0 az=89.64<-5976 ze=156.945<-1537 Statuses=0009 0009 10:53:17 Msec=0 True Az=89.64 Ze=156.945 Az status=0009 Ze status=0009 10:53:17 Check angles 10:53:17 SkyScan query 10:53:18 SkyScan query done: ret=0 az=72.24<-4816 ze=135.945<-2937 Statuses=0009 0009 10:53:18 Msec=750 True Az=72.24 Ze=135.945 Az status=0009 Ze status=0009 10:53:18 Check angles 10:53:18 SkyScan query 10:53:18 SkyScan query done: ret=0 az=54.78<-3652 ze=115.035<-4331 Statuses=0009 0009 10:53:18 Msec=1500 True Az=54.78 Ze=115.035 Az status=0009 Ze status=0009 10:53:19 Check angles 10:53:19 SkyScan query 10:53:19 SkyScan query done: ret=0 az=40.98<-2732 ze=94.005<-5733 Statuses=0009 0009 10:53:19 Msec=2250 True Az=40.98 Ze=94.005 Az status=0009 Ze status=0009 10:53:19 Check angles 10:53:19 SkyScan query 10:53:20 SkyScan query done: ret=0 az=40.995<-2733 ze=73.08<-7128 Statuses=0008 0009 10:53:20 Msec=3000 True Az=40.995 Ze=73.08 Az status=0008 Ze status=0009 10:53:20 Check angles 10:53:20 SkyScan query 10:53:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 10:53:21 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 10:53:21 Check angles 10:53:21 SkyScan query 10:53:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:53:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:53:21 Message to Master queued w/err=0: serial=272160 error=0 10:53:26 Received message from Master: op=Filter serial=272161 10:53:26 Color wheel filter change from 0 to 0 10:53:26 FLIGetFilterPos err=0 currentPosition=0 10:53:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:26 Filter is already there-color wheel unchanged 10:53:27 Received message from Master: op=Shutter serial=272162 10:53:27 Shutter LASER close 10:53:27 Received message from Camera: op=State serial=272164 10:53:27 GetSingleValue result=40 Value=cccccccc 10:53:27 SkyScan query 10:53:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:53:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:27 Parameters OK 10:53:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:27 Set A/D data flow result=40 10:53:27 Set A/D channel type result=40 10:53:27 Set A/D encoding result=40 10:53:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:27 Set channel filter=0.000000e+000 result=40 10:53:27 Config A/D Result=40 10:53:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:27 Get A/D filter: -9.255963e+061 result=40 10:53:27 Get A/D value=-858993460 result=40 10:53:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:27 Parameters OK 10:53:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:27 Set A/D data flow result=40 10:53:27 Set A/D channel type result=40 10:53:27 Set A/D encoding result=40 10:53:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:27 Set channel filter=0.000000e+000 result=40 10:53:27 Config A/D Result=40 10:53:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:27 Get A/D filter: -9.255963e+061 result=40 10:53:27 Get A/D value=-858993460 result=40 10:53:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:27 Aux= 10:53:27 Message to Camera, serial 272164 queued 10:54:04 Received message from Master: op=PointingHead serial=272177 10:54:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:54:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:54:04 Point started: ret=0 10:54:04 point_skyscan result=0 10:54:05 Check angles 10:54:05 SkyScan query 10:54:06 SkyScan query done: ret=0 az=63.84<-4256 ze=66.555<-7563 Statuses=0009 0008 10:54:06 Msec=0 True Az=63.84 Ze=66.555 Az status=0009 Ze status=0008 10:54:06 Check angles 10:54:06 SkyScan query 10:54:07 SkyScan query done: ret=0 az=81.735<-5449 ze=66.495<-7567 Statuses=0009 0008 10:54:07 Msec=750 True Az=81.735 Ze=66.495 Az status=0009 Ze status=0008 10:54:07 Check angles 10:54:07 SkyScan query 10:54:07 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 10:54:07 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 10:54:08 Check angles 10:54:08 SkyScan query 10:54:08 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 10:54:08 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 10:54:08 Check angles 10:54:08 SkyScan query 10:54:09 SkyScan query done: ret=0 az=134.82<-8988 ze=66.495<-7567 Statuses=0009 0008 10:54:09 Msec=3000 True Az=134.82 Ze=66.495 Az status=0009 Ze status=0008 10:54:09 Check angles 10:54:09 SkyScan query 10:54:10 SkyScan query done: ret=0 az=152.505<-10167 ze=66.495<-7567 Statuses=0009 0008 10:54:10 Msec=3750 True Az=152.505 Ze=66.495 Az status=0009 Ze status=0008 10:54:10 Check angles 10:54:10 SkyScan query 10:54:10 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:54:10 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:54:10 Message to Master queued w/err=0: serial=272177 error=0 10:54:15 Received message from Master: op=Filter serial=272178 10:54:15 Color wheel filter change from 0 to 0 10:54:15 FLIGetFilterPos err=0 currentPosition=0 10:54:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:15 Filter is already there-color wheel unchanged 10:54:16 Received message from Master: op=Shutter serial=272179 10:54:16 Shutter LASER close 10:54:16 Received message from Camera: op=State serial=272181 10:54:16 GetSingleValue result=40 Value=cccccccc 10:54:16 SkyScan query 10:54:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:54:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:16 Parameters OK 10:54:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:16 Set A/D data flow result=40 10:54:16 Set A/D channel type result=40 10:54:16 Set A/D encoding result=40 10:54:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:16 Set channel filter=0.000000e+000 result=40 10:54:16 Config A/D Result=40 10:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:16 Get A/D filter: -9.255963e+061 result=40 10:54:16 Get A/D value=-858993460 result=40 10:54:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:16 Parameters OK 10:54:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:16 Set A/D data flow result=40 10:54:16 Set A/D channel type result=40 10:54:16 Set A/D encoding result=40 10:54:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:16 Set channel filter=0.000000e+000 result=40 10:54:16 Config A/D Result=40 10:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:16 Get A/D filter: -9.255963e+061 result=40 10:54:16 Get A/D value=-858993460 result=40 10:54:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:16 Aux= 10:54:16 Message to Camera, serial 272181 queued 10:54:53 Received message from Master: op=PointingHead serial=272194 10:54:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:54:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:54:53 Point started: ret=0 10:54:53 point_skyscan result=0 10:54:54 Check angles 10:54:54 SkyScan query 10:54:55 SkyScan query done: ret=0 az=134.85<-8990 ze=96.51<-5566 Statuses=0009 0009 10:54:55 Msec=0 True Az=134.85 Ze=96.51 Az status=0009 Ze status=0009 10:54:55 Check angles 10:54:55 SkyScan query 10:54:56 SkyScan query done: ret=0 az=130.995<-8733 ze=117.825<-4145 Statuses=0008 0009 10:54:56 Msec=750 True Az=130.995 Ze=117.825 Az status=0008 Ze status=0009 10:54:56 Check angles 10:54:56 SkyScan query 10:54:56 SkyScan query done: ret=0 az=130.995<-8733 ze=138.825<-2745 Statuses=0008 0009 10:54:56 Msec=1500 True Az=130.995 Ze=138.825 Az status=0008 Ze status=0009 10:54:56 Check angles 10:54:56 SkyScan query 10:54:57 SkyScan query done: ret=0 az=130.995<-8733 ze=159.78<-1348 Statuses=0008 0009 10:54:57 Msec=2250 True Az=130.995 Ze=159.78 Az status=0008 Ze status=0009 10:54:57 Check angles 10:54:57 SkyScan query 10:54:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.86<-23924 Statuses=0008 0009 10:54:58 Msec=3000 True Az=130.995 Ze=-178.86 Az status=0008 Ze status=0009 10:54:58 Check angles 10:54:58 SkyScan query 10:54:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.485<-22499 Statuses=0008 0009 10:54:59 Msec=3750 True Az=130.995 Ze=-157.485 Az status=0008 Ze status=0009 10:54:59 Check angles 10:54:59 SkyScan query 10:54:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 10:54:59 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 10:55:00 Check angles 10:55:00 SkyScan query 10:55:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 10:55:00 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 10:55:00 Message to Master queued w/err=0: serial=272194 error=0 [UTC 2018-12-19 10:55:05] 10:55:05 Received message from Master: op=Filter serial=272195 10:55:05 Color wheel filter change from 0 to 0 10:55:05 FLIGetFilterPos err=0 currentPosition=0 10:55:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:05 Filter is already there-color wheel unchanged 10:55:05 Received message from Master: op=Shutter serial=272196 10:55:05 Shutter LASER close 10:55:05 Received message from Camera: op=State serial=272198 10:55:05 GetSingleValue result=40 Value=cccccccc 10:55:05 SkyScan query 10:55:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:55:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:06 Parameters OK 10:55:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:06 Set A/D data flow result=40 10:55:06 Set A/D channel type result=40 10:55:06 Set A/D encoding result=40 10:55:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:06 Set channel filter=0.000000e+000 result=40 10:55:06 Config A/D Result=40 10:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:06 Get A/D filter: -9.255963e+061 result=40 10:55:06 Get A/D value=-858993460 result=40 10:55:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:06 Parameters OK 10:55:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:06 Set A/D data flow result=40 10:55:06 Set A/D channel type result=40 10:55:06 Set A/D encoding result=40 10:55:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:06 Set channel filter=0.000000e+000 result=40 10:55:06 Config A/D Result=40 10:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:06 Get A/D filter: -9.255963e+061 result=40 10:55:06 Get A/D value=-858993460 result=40 10:55:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:06 Aux= 10:55:06 Message to Camera, serial 272198 queued 10:55:43 Received message from Master: op=PointingHead serial=272211 10:55:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:55:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:55:43 Point started: ret=0 10:55:43 point_skyscan result=0 10:55:44 Check angles 10:55:44 SkyScan query 10:55:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 10:55:44 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 10:55:45 Check angles 10:55:45 SkyScan query 10:55:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:55:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:55:45 Message to Master queued w/err=0: serial=272211 error=0 10:55:50 Received message from Master: op=Filter serial=272212 10:55:50 Color wheel filter change from 0 to 0 10:55:50 FLIGetFilterPos err=0 currentPosition=0 10:55:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:50 Filter is already there-color wheel unchanged 10:55:50 Received message from Master: op=Shutter serial=272213 10:55:50 Shutter LASER open 10:55:51 Received message from Camera: op=State serial=272215 10:55:51 GetSingleValue result=40 Value=cccccccc 10:55:51 SkyScan query 10:55:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:55:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:51 Parameters OK 10:55:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:51 Set A/D data flow result=40 10:55:51 Set A/D channel type result=40 10:55:51 Set A/D encoding result=40 10:55:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:51 Set channel filter=0.000000e+000 result=40 10:55:51 Config A/D Result=40 10:55:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:51 Get A/D filter: -9.255963e+061 result=40 10:55:51 Get A/D value=-858993460 result=40 10:55:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:51 Parameters OK 10:55:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:51 Set A/D data flow result=40 10:55:51 Set A/D channel type result=40 10:55:51 Set A/D encoding result=40 10:55:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:51 Set channel filter=0.000000e+000 result=40 10:55:51 Config A/D Result=40 10:55:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:51 Get A/D filter: -9.255963e+061 result=40 10:55:51 Get A/D value=-858993460 result=40 10:55:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:51 Aux= 10:55:51 Message to Camera, serial 272215 queued [UTC 2018-12-19 10:55:52] 10:56:00 Received message from Master: op=Shutter serial=272225 10:56:00 Shutter LASER close 10:56:00 Received message from Master: op=PointingHead serial=272229 10:56:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:56:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:56:01 Point started: ret=0 10:56:01 point_skyscan result=0 10:56:01 Check angles 10:56:01 SkyScan query 10:56:02 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.935<-21529 Statuses=0009 0009 10:56:02 Msec=0 True Az=136.305 Ze=-142.935 Az status=0009 Ze status=0009 10:56:02 Check angles 10:56:02 SkyScan query 10:56:03 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.98<-20132 Statuses=0009 0009 10:56:03 Msec=750 True Az=153.705 Ze=-121.98 Az status=0009 Ze status=0009 10:56:03 Check angles 10:56:03 SkyScan query 10:56:03 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.025<-18735 Statuses=0009 0009 10:56:03 Msec=1500 True Az=171.18 Ze=-101.025 Az status=0009 Ze status=0009 10:56:04 Check angles 10:56:04 SkyScan query 10:56:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.1<-17340 Statuses=0008 0009 10:56:04 Msec=2250 True Az=176.01 Ze=-80.1 Az status=0008 Ze status=0009 10:56:04 Check angles 10:56:04 SkyScan query 10:56:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.085<-15939 Statuses=0008 0009 10:56:05 Msec=3000 True Az=175.995 Ze=-59.085 Az status=0008 Ze status=0009 10:56:05 Check angles 10:56:05 SkyScan query 10:56:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:56:06 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:56:06 Message to Master queued w/err=0: serial=272229 error=0 10:56:11 Received message from Master: op=Filter serial=272230 10:56:11 Color wheel filter change from 0 to 0 10:56:11 FLIGetFilterPos err=0 currentPosition=0 10:56:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:11 Filter is already there-color wheel unchanged 10:56:11 Received message from Master: op=Shutter serial=272231 10:56:11 Shutter LASER close 10:56:11 Received message from Camera: op=State serial=272233 10:56:11 GetSingleValue result=40 Value=cccccccc 10:56:11 SkyScan query 10:56:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:56:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:12 Parameters OK 10:56:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:12 Set A/D data flow result=40 10:56:12 Set A/D channel type result=40 10:56:12 Set A/D encoding result=40 10:56:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:12 Set channel filter=0.000000e+000 result=40 10:56:12 Config A/D Result=40 10:56:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:12 Get A/D filter: -9.255963e+061 result=40 10:56:12 Get A/D value=-858993460 result=40 10:56:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:12 Parameters OK 10:56:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:12 Set A/D data flow result=40 10:56:12 Set A/D channel type result=40 10:56:12 Set A/D encoding result=40 10:56:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:12 Set channel filter=0.000000e+000 result=40 10:56:12 Config A/D Result=40 10:56:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:12 Get A/D filter: -9.255963e+061 result=40 10:56:12 Get A/D value=-858993460 result=40 10:56:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:12 Aux= 10:56:12 Message to Camera, serial 272233 queued 10:56:48 Received message from Master: op=PointingHead serial=272246 10:56:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:56:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:56:49 Point started: ret=0 10:56:49 point_skyscan result=0 10:56:50 Check angles 10:56:50 SkyScan query 10:56:50 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.24<-13416 Statuses=0009 0009 10:56:50 Msec=0 True Az=152.655 Ze=-21.24 Az status=0009 Ze status=0009 10:56:50 Check angles 10:56:50 SkyScan query 10:56:51 SkyScan query done: ret=0 az=134.61<-8974 ze=0.105<-11993 Statuses=0009 0009 10:56:51 Msec=750 True Az=134.61 Ze=0.105 Az status=0009 Ze status=0009 10:56:51 Check angles 10:56:51 SkyScan query 10:56:52 SkyScan query done: ret=0 az=117.315<-7821 ze=21.135<-10591 Statuses=0009 0009 10:56:52 Msec=1500 True Az=117.315 Ze=21.135 Az status=0009 Ze status=0009 10:56:52 Check angles 10:56:52 SkyScan query 10:56:52 SkyScan query done: ret=0 az=99.9<-6660 ze=42<-9200 Statuses=0009 0009 10:56:52 Msec=2250 True Az=99.9 Ze=42 Az status=0009 Ze status=0009 10:56:53 Check angles 10:56:53 SkyScan query 10:56:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:56:53 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:56:53 Check angles 10:56:53 SkyScan query 10:56:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 10:56:54 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 10:56:54 Message to Master queued w/err=0: serial=272246 error=0 10:56:59 Received message from Master: op=Filter serial=272247 10:56:59 Color wheel filter change from 0 to 0 10:56:59 FLIGetFilterPos err=0 currentPosition=0 10:56:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:59 Filter is already there-color wheel unchanged 10:56:59 Received message from Master: op=Shutter serial=272248 10:56:59 Shutter LASER close 10:56:59 Received message from Camera: op=State serial=272250 10:56:59 GetSingleValue result=40 Value=cccccccc 10:56:59 SkyScan query 10:57:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 10:57:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:00 Parameters OK 10:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:00 Set A/D data flow result=40 10:57:00 Set A/D channel type result=40 10:57:00 Set A/D encoding result=40 10:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:00 Set channel filter=0.000000e+000 result=40 10:57:00 Config A/D Result=40 10:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:00 Get A/D filter: -9.255963e+061 result=40 10:57:00 Get A/D value=-858993460 result=40 10:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:00 Parameters OK 10:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:00 Set A/D data flow result=40 10:57:00 Set A/D channel type result=40 10:57:00 Set A/D encoding result=40 10:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:00 Set channel filter=0.000000e+000 result=40 10:57:00 Config A/D Result=40 10:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:00 Get A/D filter: -9.255963e+061 result=40 10:57:00 Get A/D value=-858993460 result=40 10:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:00 Aux= 10:57:00 Message to Camera, serial 272250 queued 10:57:36 Received message from Master: op=PointingHead serial=272262 10:57:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:57:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:57:36 Point started: ret=0 10:57:36 point_skyscan result=0 10:57:37 Check angles 10:57:37 SkyScan query 10:57:37 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 10:57:37 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 10:57:38 Check angles 10:57:38 SkyScan query 10:57:38 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 10:57:38 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 10:57:38 Check angles 10:57:38 SkyScan query 10:57:39 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 10:57:39 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 10:57:39 Check angles 10:57:39 SkyScan query 10:57:40 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 10:57:40 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 10:57:40 Check angles 10:57:40 SkyScan query 10:57:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:57:40 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:57:41 Check angles 10:57:41 SkyScan query 10:57:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:57:41 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:57:41 Message to Master queued w/err=0: serial=272262 error=0 10:57:46 Received message from Master: op=Filter serial=272263 10:57:46 Color wheel filter change from 0 to 0 10:57:46 FLIGetFilterPos err=0 currentPosition=0 10:57:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:46 Filter is already there-color wheel unchanged 10:57:46 Received message from Master: op=Shutter serial=272264 10:57:46 Shutter LASER close 10:57:46 Received message from Camera: op=State serial=272266 10:57:46 GetSingleValue result=40 Value=cccccccc 10:57:46 SkyScan query 10:57:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:57:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:47 Parameters OK 10:57:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:47 Set A/D data flow result=40 10:57:47 Set A/D channel type result=40 10:57:47 Set A/D encoding result=40 10:57:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:47 Set channel filter=0.000000e+000 result=40 10:57:47 Config A/D Result=40 10:57:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:47 Get A/D filter: -9.255963e+061 result=40 10:57:47 Get A/D value=-858993460 result=40 10:57:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:47 Parameters OK 10:57:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:47 Set A/D data flow result=40 10:57:47 Set A/D channel type result=40 10:57:47 Set A/D encoding result=40 10:57:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:47 Set channel filter=0.000000e+000 result=40 10:57:47 Config A/D Result=40 10:57:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:47 Get A/D filter: -9.255963e+061 result=40 10:57:47 Get A/D value=-858993460 result=40 10:57:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:47 Aux= 10:57:47 Message to Camera, serial 272266 queued 10:58:23 Received message from Master: op=PointingHead serial=272278 10:58:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:58:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:58:23 Point started: ret=0 10:58:23 point_skyscan result=0 10:58:24 Check angles 10:58:24 SkyScan query 10:58:25 SkyScan query done: ret=0 az=152.955<-10197 ze=68.31<-7446 Statuses=0009 0009 10:58:25 Msec=0 True Az=152.955 Ze=68.31 Az status=0009 Ze status=0009 10:58:25 Check angles 10:58:25 SkyScan query 10:58:25 SkyScan query done: ret=0 az=135.57<-9038 ze=89.355<-6043 Statuses=0009 0009 10:58:25 Msec=750 True Az=135.57 Ze=89.355 Az status=0009 Ze status=0009 10:58:26 Check angles 10:58:26 SkyScan query 10:58:26 SkyScan query done: ret=0 az=118.02<-7868 ze=110.235<-4651 Statuses=0009 0009 10:58:26 Msec=1500 True Az=118.02 Ze=110.235 Az status=0009 Ze status=0009 10:58:26 Check angles 10:58:26 SkyScan query 10:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=131.235<-3251 Statuses=0008 0009 10:58:27 Msec=2250 True Az=112.995 Ze=131.235 Az status=0008 Ze status=0009 10:58:27 Check angles 10:58:27 SkyScan query 10:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=152.1<-1860 Statuses=0008 0009 10:58:28 Msec=3000 True Az=112.995 Ze=152.1 Az status=0008 Ze status=0009 10:58:28 Check angles 10:58:28 SkyScan query 10:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=173.115<-459 Statuses=0008 0009 10:58:28 Msec=3750 True Az=112.995 Ze=173.115 Az status=0008 Ze status=0009 10:58:29 Check angles 10:58:29 SkyScan query 10:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0009 10:58:29 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0009 10:58:29 Check angles 10:58:29 SkyScan query 10:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.95<-23530 Statuses=0008 0008 10:58:30 Msec=5250 True Az=112.995 Ze=-172.95 Az status=0008 Ze status=0008 10:58:30 Message to Master queued w/err=0: serial=272278 error=0 10:58:35 Received message from Master: op=Filter serial=272279 10:58:35 Color wheel filter change from 0 to 0 10:58:35 FLIGetFilterPos err=0 currentPosition=0 10:58:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:35 Filter is already there-color wheel unchanged 10:58:35 Received message from Master: op=Shutter serial=272280 10:58:35 Shutter LASER open 10:58:35 Received message from Camera: op=State serial=272282 10:58:35 GetSingleValue result=40 Value=cccccccc 10:58:35 SkyScan query 10:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:58:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:36 Parameters OK 10:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:36 Set A/D data flow result=40 10:58:36 Set A/D channel type result=40 10:58:36 Set A/D encoding result=40 10:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:36 Set channel filter=0.000000e+000 result=40 10:58:36 Config A/D Result=40 10:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:36 Get A/D filter: -9.255963e+061 result=40 10:58:36 Get A/D value=-858993460 result=40 10:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:36 Parameters OK 10:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:36 Set A/D data flow result=40 10:58:36 Set A/D channel type result=40 10:58:36 Set A/D encoding result=40 10:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:36 Set channel filter=0.000000e+000 result=40 10:58:36 Config A/D Result=40 10:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:36 Get A/D filter: -9.255963e+061 result=40 10:58:36 Get A/D value=-858993460 result=40 10:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:36 Aux= 10:58:36 Message to Camera, serial 272282 queued 10:58:44 Received message from Master: op=Shutter serial=272292 10:58:44 Shutter LASER close 10:58:45 Received message from Master: op=PointingHead serial=272296 10:58:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:58:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:58:45 Point started: ret=0 10:58:45 point_skyscan result=0 10:58:46 Check angles 10:58:46 SkyScan query 10:58:46 SkyScan query done: ret=0 az=90.12<-6008 ze=157.38<-1508 Statuses=0009 0009 10:58:46 Msec=0 True Az=90.12 Ze=157.38 Az status=0009 Ze status=0009 10:58:47 Check angles 10:58:47 SkyScan query 10:58:47 SkyScan query done: ret=0 az=72.615<-4841 ze=136.425<-2905 Statuses=0009 0009 10:58:47 Msec=750 True Az=72.615 Ze=136.425 Az status=0009 Ze status=0009 10:58:47 Check angles 10:58:47 SkyScan query 10:58:48 SkyScan query done: ret=0 az=55.2<-3680 ze=115.515<-4299 Statuses=0009 0009 10:58:48 Msec=1500 True Az=55.2 Ze=115.515 Az status=0009 Ze status=0009 10:58:48 Check angles 10:58:48 SkyScan query 10:58:49 SkyScan query done: ret=0 az=40.995<-2733 ze=94.515<-5699 Statuses=0009 0009 10:58:49 Msec=2250 True Az=40.995 Ze=94.515 Az status=0009 Ze status=0009 10:58:49 Check angles 10:58:49 SkyScan query 10:58:49 SkyScan query done: ret=0 az=40.995<-2733 ze=73.605<-7093 Statuses=0008 0009 10:58:49 Msec=3000 True Az=40.995 Ze=73.605 Az status=0008 Ze status=0009 10:58:50 Check angles 10:58:50 SkyScan query 10:58:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.965<-8469 Statuses=0008 0009 10:58:50 Msec=3750 True Az=40.995 Ze=52.965 Az status=0008 Ze status=0009 10:58:50 Check angles 10:58:50 SkyScan query 10:58:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:58:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:58:51 Message to Master queued w/err=0: serial=272296 error=0 10:58:56 Received message from Master: op=Filter serial=272297 10:58:56 Color wheel filter change from 0 to 0 10:58:56 FLIGetFilterPos err=0 currentPosition=0 10:58:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:56 Filter is already there-color wheel unchanged 10:58:56 Received message from Master: op=Shutter serial=272298 10:58:56 Shutter LASER close 10:58:56 Received message from Camera: op=State serial=272300 10:58:56 GetSingleValue result=40 Value=cccccccc 10:58:56 SkyScan query 10:58:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:58:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:57 Parameters OK 10:58:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:57 Set A/D data flow result=40 10:58:57 Set A/D channel type result=40 10:58:57 Set A/D encoding result=40 10:58:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:57 Set channel filter=0.000000e+000 result=40 10:58:57 Config A/D Result=40 10:58:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:57 Get A/D filter: -9.255963e+061 result=40 10:58:57 Get A/D value=-858993460 result=40 10:58:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:57 Parameters OK 10:58:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:57 Set A/D data flow result=40 10:58:57 Set A/D channel type result=40 10:58:57 Set A/D encoding result=40 10:58:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:57 Set channel filter=0.000000e+000 result=40 10:58:57 Config A/D Result=40 10:58:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:57 Get A/D filter: -9.255963e+061 result=40 10:58:57 Get A/D value=-858993460 result=40 10:58:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:57 Aux= 10:58:57 Message to Camera, serial 272300 queued 10:59:34 Received message from Master: op=PointingHead serial=272313 10:59:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:59:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:59:34 Point started: ret=0 10:59:34 point_skyscan result=0 10:59:35 Check angles 10:59:35 SkyScan query 10:59:35 SkyScan query done: ret=0 az=64.035<-4269 ze=66.555<-7563 Statuses=0009 0008 10:59:35 Msec=0 True Az=64.035 Ze=66.555 Az status=0009 Ze status=0008 10:59:35 Check angles 10:59:35 SkyScan query 10:59:36 SkyScan query done: ret=0 az=81.93<-5462 ze=66.495<-7567 Statuses=0009 0008 10:59:36 Msec=750 True Az=81.93 Ze=66.495 Az status=0009 Ze status=0008 10:59:36 Check angles 10:59:36 SkyScan query 10:59:37 SkyScan query done: ret=0 az=99.855<-6657 ze=66.495<-7567 Statuses=0009 0008 10:59:37 Msec=1500 True Az=99.855 Ze=66.495 Az status=0009 Ze status=0008 10:59:37 Check angles 10:59:37 SkyScan query 10:59:38 SkyScan query done: ret=0 az=117.255<-7817 ze=66.495<-7567 Statuses=0009 0008 10:59:38 Msec=2250 True Az=117.255 Ze=66.495 Az status=0009 Ze status=0008 10:59:38 Check angles 10:59:38 SkyScan query 10:59:38 SkyScan query done: ret=0 az=134.715<-8981 ze=66.495<-7567 Statuses=0009 0008 10:59:38 Msec=3000 True Az=134.715 Ze=66.495 Az status=0009 Ze status=0008 10:59:38 Check angles 10:59:38 SkyScan query 10:59:39 SkyScan query done: ret=0 az=151.995<-10133 ze=66.495<-7567 Statuses=0009 0008 10:59:39 Msec=3750 True Az=151.995 Ze=66.495 Az status=0009 Ze status=0008 10:59:39 Check angles 10:59:39 SkyScan query 10:59:40 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:59:40 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:59:40 Message to Master queued w/err=0: serial=272313 error=0 10:59:45 Received message from Master: op=Filter serial=272314 10:59:45 Color wheel filter change from 0 to 0 10:59:45 FLIGetFilterPos err=0 currentPosition=0 10:59:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:45 Filter is already there-color wheel unchanged 10:59:45 Received message from Master: op=Shutter serial=272315 10:59:45 Shutter LASER close 10:59:45 Received message from Camera: op=State serial=272317 10:59:45 GetSingleValue result=40 Value=cccccccc 10:59:45 SkyScan query 10:59:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:59:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:46 Parameters OK 10:59:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:46 Set A/D data flow result=40 10:59:46 Set A/D channel type result=40 10:59:46 Set A/D encoding result=40 10:59:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:46 Set channel filter=0.000000e+000 result=40 10:59:46 Config A/D Result=40 10:59:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:46 Get A/D filter: -9.255963e+061 result=40 10:59:46 Get A/D value=-858993460 result=40 10:59:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:46 Parameters OK 10:59:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:46 Set A/D data flow result=40 10:59:46 Set A/D channel type result=40 10:59:46 Set A/D encoding result=40 10:59:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:46 Set channel filter=0.000000e+000 result=40 10:59:46 Config A/D Result=40 10:59:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:46 Get A/D filter: -9.255963e+061 result=40 10:59:46 Get A/D value=-858993460 result=40 10:59:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:46 Aux= 10:59:46 Message to Camera, serial 272317 queued 11:00:23 Received message from Master: op=PointingHead serial=272330 11:00:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:00:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:00:23 Point started: ret=0 11:00:23 point_skyscan result=0 11:00:24 Check angles 11:00:24 SkyScan query 11:00:24 SkyScan query done: ret=0 az=134.565<-8971 ze=96.675<-5555 Statuses=0009 0009 11:00:24 Msec=0 True Az=134.565 Ze=96.675 Az status=0009 Ze status=0009 11:00:24 Check angles 11:00:24 SkyScan query 11:00:25 SkyScan query done: ret=0 az=130.995<-8733 ze=117.66<-4156 Statuses=0008 0009 11:00:25 Msec=750 True Az=130.995 Ze=117.66 Az status=0008 Ze status=0009 11:00:25 Check angles 11:00:25 SkyScan query 11:00:26 SkyScan query done: ret=0 az=130.995<-8733 ze=138.57<-2762 Statuses=0008 0009 11:00:26 Msec=1500 True Az=130.995 Ze=138.57 Az status=0008 Ze status=0009 11:00:26 Check angles 11:00:26 SkyScan query 11:00:27 SkyScan query done: ret=0 az=130.995<-8733 ze=159.525<-1365 Statuses=0008 0009 11:00:27 Msec=2250 True Az=130.995 Ze=159.525 Az status=0008 Ze status=0009 11:00:27 Check angles 11:00:27 SkyScan query 11:00:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.52<-23968 Statuses=0008 0009 11:00:27 Msec=3000 True Az=130.995 Ze=-179.52 Az status=0008 Ze status=0009 11:00:27 Check angles 11:00:27 SkyScan query 11:00:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.565<-22571 Statuses=0008 0009 11:00:28 Msec=3750 True Az=130.995 Ze=-158.565 Az status=0008 Ze status=0009 11:00:28 Check angles 11:00:28 SkyScan query 11:00:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 11:00:29 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 11:00:29 Check angles 11:00:29 SkyScan query 11:00:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 11:00:30 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 11:00:30 Message to Master queued w/err=0: serial=272330 error=0 11:00:35 Received message from Master: op=Filter serial=272331 11:00:35 Color wheel filter change from 0 to 0 11:00:35 FLIGetFilterPos err=0 currentPosition=0 11:00:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:35 Filter is already there-color wheel unchanged 11:00:35 Received message from Master: op=Shutter serial=272332 11:00:35 Shutter LASER close 11:00:35 Received message from Camera: op=State serial=272334 11:00:35 GetSingleValue result=40 Value=cccccccc 11:00:35 SkyScan query 11:00:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:00:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:35 Parameters OK 11:00:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:35 Set A/D data flow result=40 11:00:35 Set A/D channel type result=40 11:00:35 Set A/D encoding result=40 11:00:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:35 Set channel filter=0.000000e+000 result=40 11:00:35 Config A/D Result=40 11:00:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:35 Get A/D filter: -9.255963e+061 result=40 11:00:35 Get A/D value=-858993460 result=40 11:00:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:35 Parameters OK 11:00:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:35 Set A/D data flow result=40 11:00:35 Set A/D channel type result=40 11:00:35 Set A/D encoding result=40 11:00:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:35 Set channel filter=0.000000e+000 result=40 11:00:35 Config A/D Result=40 11:00:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:35 Get A/D filter: -9.255963e+061 result=40 11:00:35 Get A/D value=-858993460 result=40 11:00:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:35 Aux= 11:00:35 Message to Camera, serial 272334 queued 11:01:11 Received message from Master: op=PointingHead serial=272346 11:01:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:01:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:01:12 Point started: ret=0 11:01:12 point_skyscan result=0 11:01:12 Check angles 11:01:12 SkyScan query 11:01:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 11:01:13 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 11:01:13 Check angles 11:01:13 SkyScan query 11:01:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:01:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:01:14 Message to Master queued w/err=0: serial=272346 error=0 11:01:19 Received message from Master: op=Filter serial=272347 11:01:19 Color wheel filter change from 0 to 0 11:01:19 FLIGetFilterPos err=0 currentPosition=0 11:01:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:19 Filter is already there-color wheel unchanged 11:01:19 Received message from Master: op=Shutter serial=272348 11:01:19 Shutter LASER open 11:01:19 Received message from Camera: op=State serial=272350 11:01:19 GetSingleValue result=40 Value=cccccccc 11:01:19 SkyScan query 11:01:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:01:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:20 Parameters OK 11:01:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:20 Set A/D data flow result=40 11:01:20 Set A/D channel type result=40 11:01:20 Set A/D encoding result=40 11:01:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:20 Set channel filter=0.000000e+000 result=40 11:01:20 Config A/D Result=40 11:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:20 Get A/D filter: -9.255963e+061 result=40 11:01:20 Get A/D value=-858993460 result=40 11:01:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:20 Parameters OK 11:01:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:20 Set A/D data flow result=40 11:01:20 Set A/D channel type result=40 11:01:20 Set A/D encoding result=40 11:01:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:20 Set channel filter=0.000000e+000 result=40 11:01:20 Config A/D Result=40 11:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:20 Get A/D filter: -9.255963e+061 result=40 11:01:20 Get A/D value=-858993460 result=40 11:01:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:20 Aux= 11:01:20 Message to Camera, serial 272350 queued 11:01:28 Received message from Master: op=Shutter serial=272360 11:01:28 Shutter LASER close 11:01:29 Received message from Master: op=PointingHead serial=272364 11:01:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:01:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:01:29 Point started: ret=0 11:01:29 point_skyscan result=0 11:01:30 Check angles 11:01:30 SkyScan query 11:01:30 SkyScan query done: ret=0 az=136.455<-9097 ze=-142.845<-21523 Statuses=0009 0009 11:01:30 Msec=0 True Az=136.455 Ze=-142.845 Az status=0009 Ze status=0009 11:01:30 Check angles 11:01:30 SkyScan query 11:01:31 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.89<-20126 Statuses=0009 0009 11:01:31 Msec=750 True Az=153.96 Ze=-121.89 Az status=0009 Ze status=0009 11:01:31 Check angles 11:01:31 SkyScan query 11:01:32 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.89<-18726 Statuses=0009 0009 11:01:32 Msec=1500 True Az=171.39 Ze=-100.89 Az status=0009 Ze status=0009 11:01:32 Check angles 11:01:32 SkyScan query 11:01:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.995<-17333 Statuses=0008 0009 11:01:33 Msec=2250 True Az=175.995 Ze=-79.995 Az status=0008 Ze status=0009 11:01:33 Check angles 11:01:33 SkyScan query 11:01:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.01<-15934 Statuses=0008 0009 11:01:33 Msec=3000 True Az=175.995 Ze=-59.01 Az status=0008 Ze status=0009 11:01:33 Check angles 11:01:33 SkyScan query 11:01:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:01:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:01:34 Message to Master queued w/err=0: serial=272364 error=0 11:01:39 Received message from Master: op=Filter serial=272365 11:01:39 Color wheel filter change from 0 to 0 11:01:39 FLIGetFilterPos err=0 currentPosition=0 11:01:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:39 Filter is already there-color wheel unchanged 11:01:39 Received message from Master: op=Shutter serial=272366 11:01:39 Shutter LASER close 11:01:39 Received message from Camera: op=State serial=272368 11:01:39 GetSingleValue result=40 Value=cccccccc 11:01:39 SkyScan query 11:01:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:01:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:40 Parameters OK 11:01:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:40 Set A/D data flow result=40 11:01:40 Set A/D channel type result=40 11:01:40 Set A/D encoding result=40 11:01:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:40 Set channel filter=0.000000e+000 result=40 11:01:40 Config A/D Result=40 11:01:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:40 Get A/D filter: -9.255963e+061 result=40 11:01:40 Get A/D value=-858993460 result=40 11:01:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:40 Parameters OK 11:01:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:40 Set A/D data flow result=40 11:01:40 Set A/D channel type result=40 11:01:40 Set A/D encoding result=40 11:01:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:40 Set channel filter=0.000000e+000 result=40 11:01:40 Config A/D Result=40 11:01:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:40 Get A/D filter: -9.255963e+061 result=40 11:01:40 Get A/D value=-858993460 result=40 11:01:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:40 Aux= 11:01:40 Message to Camera, serial 272368 queued 11:02:17 Received message from Master: op=PointingHead serial=272381 11:02:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:02:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:02:17 Point started: ret=0 11:02:17 point_skyscan result=0 11:02:18 Check angles 11:02:18 SkyScan query 11:02:18 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.405<-13427 Statuses=0009 0009 11:02:18 Msec=0 True Az=152.745 Ze=-21.405 Az status=0009 Ze status=0009 11:02:19 Check angles 11:02:19 SkyScan query 11:02:19 SkyScan query done: ret=0 az=134.895<-8993 ze=-0.03<-12002 Statuses=0009 0009 11:02:19 Msec=750 True Az=134.895 Ze=-0.03 Az status=0009 Ze status=0009 11:02:19 Check angles 11:02:19 SkyScan query 11:02:20 SkyScan query done: ret=0 az=117.42<-7828 ze=20.985<-10601 Statuses=0009 0009 11:02:20 Msec=1500 True Az=117.42 Ze=20.985 Az status=0009 Ze status=0009 11:02:20 Check angles 11:02:20 SkyScan query 11:02:21 SkyScan query done: ret=0 az=99.99<-6666 ze=41.835<-9211 Statuses=0009 0009 11:02:21 Msec=2250 True Az=99.99 Ze=41.835 Az status=0009 Ze status=0009 11:02:21 Check angles 11:02:21 SkyScan query 11:02:22 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 11:02:22 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 11:02:22 Check angles 11:02:22 SkyScan query 11:02:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:02:22 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 11:02:22 Message to Master queued w/err=0: serial=272381 error=0 11:02:27 Received message from Master: op=Filter serial=272382 11:02:27 Color wheel filter change from 0 to 0 11:02:27 FLIGetFilterPos err=0 currentPosition=0 11:02:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:27 Filter is already there-color wheel unchanged 11:02:27 Received message from Master: op=Shutter serial=272383 11:02:27 Shutter LASER close 11:02:27 Received message from Camera: op=State serial=272385 11:02:27 GetSingleValue result=40 Value=cccccccc 11:02:27 SkyScan query 11:02:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:02:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:28 Parameters OK 11:02:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:28 Set A/D data flow result=40 11:02:28 Set A/D channel type result=40 11:02:28 Set A/D encoding result=40 11:02:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:28 Set channel filter=0.000000e+000 result=40 11:02:28 Config A/D Result=40 11:02:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:28 Get A/D filter: -9.255963e+061 result=40 11:02:28 Get A/D value=-858993460 result=40 11:02:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:28 Parameters OK 11:02:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:28 Set A/D data flow result=40 11:02:28 Set A/D channel type result=40 11:02:28 Set A/D encoding result=40 11:02:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:28 Set channel filter=0.000000e+000 result=40 11:02:28 Config A/D Result=40 11:02:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:28 Get A/D filter: -9.255963e+061 result=40 11:02:28 Get A/D value=-858993460 result=40 11:02:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:28 Aux= 11:02:28 Message to Camera, serial 272385 queued 11:03:05 Received message from Master: op=PointingHead serial=272398 11:03:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:03:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:03:05 Point started: ret=0 11:03:05 point_skyscan result=0 11:03:06 Check angles 11:03:06 SkyScan query 11:03:07 SkyScan query done: ret=0 az=109.155<-7277 ze=38.475<-9435 Statuses=0009 0008 11:03:07 Msec=0 True Az=109.155 Ze=38.475 Az status=0009 Ze status=0008 11:03:07 Check angles 11:03:07 SkyScan query 11:03:07 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 11:03:07 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 11:03:08 Check angles 11:03:08 SkyScan query 11:03:08 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 11:03:08 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 11:03:08 Check angles 11:03:08 SkyScan query 11:03:09 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 11:03:09 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 11:03:09 Check angles 11:03:09 SkyScan query 11:03:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:03:10 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:03:10 Check angles 11:03:10 SkyScan query 11:03:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:03:10 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:03:10 Message to Master queued w/err=0: serial=272398 error=0 11:03:15 Received message from Master: op=Filter serial=272399 11:03:15 Color wheel filter change from 0 to 0 11:03:15 FLIGetFilterPos err=0 currentPosition=0 11:03:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:15 Filter is already there-color wheel unchanged 11:03:16 Received message from Master: op=Shutter serial=272400 11:03:16 Shutter LASER close 11:03:16 Received message from Camera: op=State serial=272402 11:03:16 GetSingleValue result=40 Value=cccccccc 11:03:16 SkyScan query 11:03:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:03:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:16 Parameters OK 11:03:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:16 Set A/D data flow result=40 11:03:16 Set A/D channel type result=40 11:03:16 Set A/D encoding result=40 11:03:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:16 Set channel filter=0.000000e+000 result=40 11:03:16 Config A/D Result=40 11:03:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:16 Get A/D filter: -9.255963e+061 result=40 11:03:16 Get A/D value=-858993460 result=40 11:03:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:16 Parameters OK 11:03:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:16 Set A/D data flow result=40 11:03:16 Set A/D channel type result=40 11:03:16 Set A/D encoding result=40 11:03:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:16 Set channel filter=0.000000e+000 result=40 11:03:16 Config A/D Result=40 11:03:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:16 Get A/D filter: -9.255963e+061 result=40 11:03:16 Get A/D value=-858993460 result=40 11:03:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:16 Aux= 11:03:16 Message to Camera, serial 272402 queued 11:03:53 Received message from Master: op=PointingHead serial=272415 11:03:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:03:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:03:53 Point started: ret=0 11:03:53 point_skyscan result=0 11:03:54 Check angles 11:03:54 SkyScan query 11:03:55 SkyScan query done: ret=0 az=152.955<-10197 ze=68.325<-7445 Statuses=0009 0009 11:03:55 Msec=0 True Az=152.955 Ze=68.325 Az status=0009 Ze status=0009 11:03:55 Check angles 11:03:55 SkyScan query 11:03:56 SkyScan query done: ret=0 az=135.15<-9010 ze=89.775<-6015 Statuses=0009 0009 11:03:56 Msec=750 True Az=135.15 Ze=89.775 Az status=0009 Ze status=0009 11:03:56 Check angles 11:03:56 SkyScan query 11:03:56 SkyScan query done: ret=0 az=117.66<-7844 ze=110.655<-4623 Statuses=0009 0009 11:03:56 Msec=1500 True Az=117.66 Ze=110.655 Az status=0009 Ze status=0009 11:03:56 Check angles 11:03:56 SkyScan query 11:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=131.67<-3222 Statuses=0008 0009 11:03:57 Msec=2250 True Az=112.995 Ze=131.67 Az status=0008 Ze status=0009 11:03:57 Check angles 11:03:57 SkyScan query 11:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=152.58<-1828 Statuses=0008 0009 11:03:58 Msec=3000 True Az=112.995 Ze=152.58 Az status=0008 Ze status=0009 11:03:58 Check angles 11:03:58 SkyScan query 11:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=174<-400 Statuses=0008 0009 11:03:59 Msec=3750 True Az=112.995 Ze=174 Az status=0008 Ze status=0009 11:03:59 Check angles 11:03:59 SkyScan query 11:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 11:03:59 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 11:03:59 Message to Master queued w/err=0: serial=272415 error=0 11:04:04 Received message from Master: op=Filter serial=272416 11:04:04 Color wheel filter change from 0 to 0 11:04:04 FLIGetFilterPos err=0 currentPosition=0 11:04:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:04 Filter is already there-color wheel unchanged 11:04:05 Received message from Master: op=Shutter serial=272417 11:04:05 Shutter LASER open 11:04:05 Received message from Camera: op=State serial=272419 11:04:05 GetSingleValue result=40 Value=cccccccc 11:04:05 SkyScan query 11:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:04:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:05 Parameters OK 11:04:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:05 Set A/D data flow result=40 11:04:05 Set A/D channel type result=40 11:04:05 Set A/D encoding result=40 11:04:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:05 Set channel filter=0.000000e+000 result=40 11:04:05 Config A/D Result=40 11:04:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:05 Get A/D filter: -9.255963e+061 result=40 11:04:05 Get A/D value=-858993460 result=40 11:04:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:05 Parameters OK 11:04:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:05 Set A/D data flow result=40 11:04:05 Set A/D channel type result=40 11:04:05 Set A/D encoding result=40 11:04:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:05 Set channel filter=0.000000e+000 result=40 11:04:05 Config A/D Result=40 11:04:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:05 Get A/D filter: -9.255963e+061 result=40 11:04:05 Get A/D value=-858993460 result=40 11:04:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:05 Aux= 11:04:05 Message to Camera, serial 272419 queued 11:04:14 Received message from Master: op=Shutter serial=272429 11:04:14 Shutter LASER close 11:04:14 Received message from Master: op=PointingHead serial=272433 11:04:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:04:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:04:15 Point started: ret=0 11:04:15 point_skyscan result=0 11:04:15 Check angles 11:04:15 SkyScan query 11:04:16 SkyScan query done: ret=0 az=89.895<-5993 ze=157.155<-1523 Statuses=0009 0009 11:04:16 Msec=0 True Az=89.895 Ze=157.155 Az status=0009 Ze status=0009 11:04:16 Check angles 11:04:16 SkyScan query 11:04:17 SkyScan query done: ret=0 az=72.045<-4803 ze=135.75<-2950 Statuses=0009 0009 11:04:17 Msec=750 True Az=72.045 Ze=135.75 Az status=0009 Ze status=0009 11:04:17 Check angles 11:04:17 SkyScan query 11:04:17 SkyScan query done: ret=0 az=54.585<-3639 ze=114.78<-4348 Statuses=0009 0009 11:04:17 Msec=1500 True Az=54.585 Ze=114.78 Az status=0009 Ze status=0009 11:04:18 Check angles 11:04:18 SkyScan query 11:04:18 SkyScan query done: ret=0 az=40.98<-2732 ze=93.81<-5746 Statuses=0009 0009 11:04:18 Msec=2250 True Az=40.98 Ze=93.81 Az status=0009 Ze status=0009 11:04:18 Check angles 11:04:18 SkyScan query 11:04:19 SkyScan query done: ret=0 az=40.995<-2733 ze=72.855<-7143 Statuses=0008 0009 11:04:19 Msec=3000 True Az=40.995 Ze=72.855 Az status=0008 Ze status=0009 11:04:19 Check angles 11:04:19 SkyScan query 11:04:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 11:04:20 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 11:04:20 Check angles 11:04:20 SkyScan query 11:04:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:04:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:04:20 Message to Master queued w/err=0: serial=272433 error=0 11:04:25 Received message from Master: op=Filter serial=272434 11:04:25 Color wheel filter change from 0 to 0 11:04:25 FLIGetFilterPos err=0 currentPosition=0 11:04:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:25 Filter is already there-color wheel unchanged 11:04:26 Received message from Master: op=Shutter serial=272435 11:04:26 Shutter LASER close 11:04:26 Received message from Camera: op=State serial=272437 11:04:26 GetSingleValue result=40 Value=cccccccc 11:04:26 SkyScan query 11:04:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:04:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:26 Parameters OK 11:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:26 Set A/D data flow result=40 11:04:26 Set A/D channel type result=40 11:04:26 Set A/D encoding result=40 11:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:26 Set channel filter=0.000000e+000 result=40 11:04:26 Config A/D Result=40 11:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:26 Get A/D filter: -9.255963e+061 result=40 11:04:26 Get A/D value=-858993460 result=40 11:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:26 Parameters OK 11:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:26 Set A/D data flow result=40 11:04:26 Set A/D channel type result=40 11:04:26 Set A/D encoding result=40 11:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:26 Set channel filter=0.000000e+000 result=40 11:04:26 Config A/D Result=40 11:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:26 Get A/D filter: -9.255963e+061 result=40 11:04:26 Get A/D value=-858993460 result=40 11:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:26 Aux= 11:04:26 Message to Camera, serial 272437 queued 11:05:03 Received message from Master: op=PointingHead serial=272450 11:05:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:05:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:05:04 Point started: ret=0 11:05:04 point_skyscan result=0 11:05:04 Check angles 11:05:04 SkyScan query 11:05:05 SkyScan query done: ret=0 az=64.365<-4291 ze=66.555<-7563 Statuses=0009 0008 11:05:05 Msec=0 True Az=64.365 Ze=66.555 Az status=0009 Ze status=0008 11:05:05 Check angles 11:05:05 SkyScan query 11:05:06 SkyScan query done: ret=0 az=81.855<-5457 ze=66.495<-7567 Statuses=0009 0008 11:05:06 Msec=750 True Az=81.855 Ze=66.495 Az status=0009 Ze status=0008 11:05:06 Check angles 11:05:06 SkyScan query 11:05:06 SkyScan query done: ret=0 az=99.735<-6649 ze=66.495<-7567 Statuses=0009 0008 11:05:06 Msec=1500 True Az=99.735 Ze=66.495 Az status=0009 Ze status=0008 11:05:07 Check angles 11:05:07 SkyScan query 11:05:07 SkyScan query done: ret=0 az=117.21<-7814 ze=66.495<-7567 Statuses=0009 0008 11:05:07 Msec=2250 True Az=117.21 Ze=66.495 Az status=0009 Ze status=0008 11:05:07 Check angles 11:05:07 SkyScan query 11:05:08 SkyScan query done: ret=0 az=134.73<-8982 ze=66.495<-7567 Statuses=0009 0008 11:05:08 Msec=3000 True Az=134.73 Ze=66.495 Az status=0009 Ze status=0008 11:05:08 Check angles 11:05:08 SkyScan query 11:05:09 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 11:05:09 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 11:05:09 Check angles 11:05:09 SkyScan query 11:05:09 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 11:05:09 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 11:05:09 Message to Master queued w/err=0: serial=272450 error=0 11:05:14 Received message from Master: op=Filter serial=272451 11:05:14 Color wheel filter change from 0 to 0 11:05:14 FLIGetFilterPos err=0 currentPosition=0 11:05:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:14 Filter is already there-color wheel unchanged 11:05:15 Received message from Master: op=Shutter serial=272452 11:05:15 Shutter LASER close 11:05:15 Received message from Camera: op=State serial=272454 11:05:15 GetSingleValue result=40 Value=cccccccc 11:05:15 SkyScan query 11:05:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:05:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:15 Parameters OK 11:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:15 Set A/D data flow result=40 11:05:15 Set A/D channel type result=40 11:05:15 Set A/D encoding result=40 11:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-19 11:05:15] 11:05:15 Set channel filter=0.000000e+000 result=40 11:05:15 Config A/D Result=40 11:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:15 Get A/D filter: -9.255963e+061 result=40 11:05:15 Get A/D value=-858993460 result=40 11:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:15 Parameters OK 11:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:15 Set A/D data flow result=40 11:05:15 Set A/D channel type result=40 11:05:15 Set A/D encoding result=40 11:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:15 Set channel filter=0.000000e+000 result=40 11:05:15 Config A/D Result=40 11:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:15 Get A/D filter: -9.255963e+061 result=40 11:05:15 Get A/D value=-858993460 result=40 11:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:15 Aux= 11:05:15 Message to Camera, serial 272454 queued 11:05:52 Received message from Master: op=PointingHead serial=272467 11:05:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:05:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:05:53 Point started: ret=0 11:05:53 point_skyscan result=0 11:05:53 Check angles 11:05:53 SkyScan query 11:05:54 SkyScan query done: ret=0 az=135.12<-9008 ze=96.18<-5588 Statuses=0009 0009 11:05:54 Msec=0 True Az=135.12 Ze=96.18 Az status=0009 Ze status=0009 11:05:54 Check angles 11:05:54 SkyScan query 11:05:55 SkyScan query done: ret=0 az=130.995<-8733 ze=117.48<-4168 Statuses=0008 0009 11:05:55 Msec=750 True Az=130.995 Ze=117.48 Az status=0008 Ze status=0009 11:05:55 Check angles 11:05:55 SkyScan query 11:05:55 SkyScan query done: ret=0 az=130.995<-8733 ze=138.465<-2769 Statuses=0008 0009 11:05:55 Msec=1500 True Az=130.995 Ze=138.465 Az status=0008 Ze status=0009 11:05:56 Check angles 11:05:56 SkyScan query 11:05:56 SkyScan query done: ret=0 az=130.995<-8733 ze=159.87<-1342 Statuses=0008 0009 11:05:56 Msec=2250 True Az=130.995 Ze=159.87 Az status=0008 Ze status=0009 11:05:56 Check angles 11:05:56 SkyScan query 11:05:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.22<-23948 Statuses=0008 0009 11:05:57 Msec=3000 True Az=130.995 Ze=-179.22 Az status=0008 Ze status=0009 11:05:57 Check angles 11:05:57 SkyScan query 11:05:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.205<-22547 Statuses=0008 0009 11:05:58 Msec=3750 True Az=130.995 Ze=-158.205 Az status=0008 Ze status=0009 11:05:58 Check angles 11:05:58 SkyScan query 11:05:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 11:05:58 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 11:05:59 Check angles 11:05:59 SkyScan query 11:05:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 11:05:59 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 11:05:59 Message to Master queued w/err=0: serial=272467 error=0 11:06:04 Received message from Master: op=Filter serial=272468 11:06:04 Color wheel filter change from 0 to 0 11:06:04 FLIGetFilterPos err=0 currentPosition=0 11:06:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:04 Filter is already there-color wheel unchanged 11:06:04 Received message from Master: op=Shutter serial=272469 11:06:04 Shutter LASER close 11:06:04 Received message from Camera: op=State serial=272471 11:06:04 GetSingleValue result=40 Value=cccccccc 11:06:04 SkyScan query 11:06:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:06:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:05 Parameters OK 11:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:05 Set A/D data flow result=40 11:06:05 Set A/D channel type result=40 11:06:05 Set A/D encoding result=40 11:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:05 Set channel filter=0.000000e+000 result=40 11:06:05 Config A/D Result=40 11:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:05 Get A/D filter: -9.255963e+061 result=40 11:06:05 Get A/D value=-858993460 result=40 11:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:05 Parameters OK 11:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:05 Set A/D data flow result=40 11:06:05 Set A/D channel type result=40 11:06:05 Set A/D encoding result=40 11:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:05 Set channel filter=0.000000e+000 result=40 11:06:05 Config A/D Result=40 11:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:05 Get A/D filter: -9.255963e+061 result=40 11:06:05 Get A/D value=-858993460 result=40 11:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:05 Aux= 11:06:05 Message to Camera, serial 272471 queued 11:06:42 Received message from Master: op=PointingHead serial=272484 11:06:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:06:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:06:42 Point started: ret=0 11:06:42 point_skyscan result=0 11:06:43 Check angles 11:06:43 SkyScan query 11:06:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 11:06:43 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 11:06:44 Check angles 11:06:44 SkyScan query 11:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:06:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:06:44 Message to Master queued w/err=0: serial=272484 error=0 11:06:49 Received message from Master: op=Filter serial=272485 11:06:49 Color wheel filter change from 0 to 0 11:06:49 FLIGetFilterPos err=0 currentPosition=0 11:06:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:49 Filter is already there-color wheel unchanged 11:06:49 Received message from Master: op=Shutter serial=272486 11:06:49 Shutter LASER open 11:06:50 Received message from Camera: op=State serial=272488 11:06:50 GetSingleValue result=40 Value=cccccccc 11:06:50 SkyScan query 11:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:06:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:50 Parameters OK 11:06:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:50 Set A/D data flow result=40 11:06:50 Set A/D channel type result=40 11:06:50 Set A/D encoding result=40 11:06:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:50 Set channel filter=0.000000e+000 result=40 11:06:50 Config A/D Result=40 11:06:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:50 Get A/D filter: -9.255963e+061 result=40 11:06:50 Get A/D value=-858993460 result=40 11:06:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:50 Parameters OK 11:06:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:50 Set A/D data flow result=40 11:06:50 Set A/D channel type result=40 11:06:50 Set A/D encoding result=40 11:06:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:50 Set channel filter=0.000000e+000 result=40 11:06:50 Config A/D Result=40 11:06:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:50 Get A/D filter: -9.255963e+061 result=40 11:06:50 Get A/D value=-858993460 result=40 11:06:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:50 Aux= 11:06:50 Message to Camera, serial 272488 queued 11:06:59 Received message from Master: op=Shutter serial=272498 11:06:59 Shutter LASER close 11:06:59 Received message from Master: op=PointingHead serial=272502 11:06:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:06:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:06:59 Point started: ret=0 11:06:59 point_skyscan result=0 11:07:00 Check angles 11:07:00 SkyScan query 11:07:01 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.19<-21546 Statuses=0009 0009 11:07:01 Msec=0 True Az=136.11 Ze=-143.19 Az status=0009 Ze status=0009 11:07:01 Check angles 11:07:01 SkyScan query 11:07:02 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.25<-20150 Statuses=0009 0009 11:07:02 Msec=750 True Az=153.495 Ze=-122.25 Az status=0009 Ze status=0009 11:07:02 Check angles 11:07:02 SkyScan query 11:07:02 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.77<-18718 Statuses=0009 0009 11:07:02 Msec=1500 True Az=171.36 Ze=-100.77 Az status=0009 Ze status=0009 11:07:03 Check angles 11:07:03 SkyScan query 11:07:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.905<-17327 Statuses=0008 0009 11:07:03 Msec=2250 True Az=176.01 Ze=-79.905 Az status=0008 Ze status=0009 11:07:03 Check angles 11:07:03 SkyScan query 11:07:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.89<-15926 Statuses=0008 0009 11:07:04 Msec=3000 True Az=175.995 Ze=-58.89 Az status=0008 Ze status=0009 11:07:04 Check angles 11:07:04 SkyScan query 11:07:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:07:05 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:07:05 Message to Master queued w/err=0: serial=272502 error=0 11:07:10 Received message from Master: op=Filter serial=272503 11:07:10 Color wheel filter change from 0 to 0 11:07:10 FLIGetFilterPos err=0 currentPosition=0 11:07:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:10 Filter is already there-color wheel unchanged 11:07:10 Received message from Master: op=Shutter serial=272504 11:07:10 Shutter LASER close 11:07:10 Received message from Camera: op=State serial=272506 11:07:10 GetSingleValue result=40 Value=cccccccc 11:07:10 SkyScan query 11:07:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:07:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:11 Parameters OK 11:07:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:11 Set A/D data flow result=40 11:07:11 Set A/D channel type result=40 11:07:11 Set A/D encoding result=40 11:07:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:11 Set channel filter=0.000000e+000 result=40 11:07:11 Config A/D Result=40 11:07:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:11 Get A/D filter: -9.255963e+061 result=40 11:07:11 Get A/D value=-858993460 result=40 11:07:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:11 Parameters OK 11:07:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:11 Set A/D data flow result=40 11:07:11 Set A/D channel type result=40 11:07:11 Set A/D encoding result=40 11:07:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:11 Set channel filter=0.000000e+000 result=40 11:07:11 Config A/D Result=40 11:07:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:11 Get A/D filter: -9.255963e+061 result=40 11:07:11 Get A/D value=-858993460 result=40 11:07:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:11 Aux= 11:07:11 Message to Camera, serial 272506 queued 11:07:47 Received message from Master: op=PointingHead serial=272519 11:07:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:07:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:07:48 Point started: ret=0 11:07:48 point_skyscan result=0 11:07:48 Check angles 11:07:48 SkyScan query 11:07:49 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.66<-13444 Statuses=0009 0009 11:07:49 Msec=0 True Az=152.955 Ze=-21.66 Az status=0009 Ze status=0009 11:07:49 Check angles 11:07:49 SkyScan query 11:07:50 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.735<-12049 Statuses=0009 0009 11:07:50 Msec=750 True Az=135.39 Ze=-0.735 Az status=0009 Ze status=0009 11:07:50 Check angles 11:07:50 SkyScan query 11:07:51 SkyScan query done: ret=0 az=118.005<-7867 ze=20.22<-10652 Statuses=0009 0009 11:07:51 Msec=1500 True Az=118.005 Ze=20.22 Az status=0009 Ze status=0009 11:07:51 Check angles 11:07:51 SkyScan query 11:07:51 SkyScan query done: ret=0 az=100.545<-6703 ze=41.19<-9254 Statuses=0009 0009 11:07:51 Msec=2250 True Az=100.545 Ze=41.19 Az status=0009 Ze status=0009 11:07:51 Check angles 11:07:51 SkyScan query 11:07:52 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 11:07:52 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 11:07:52 Check angles 11:07:52 SkyScan query 11:07:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:07:53 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:07:53 Message to Master queued w/err=0: serial=272519 error=0 11:07:58 Received message from Master: op=Filter serial=272520 11:07:58 Color wheel filter change from 0 to 0 11:07:58 FLIGetFilterPos err=0 currentPosition=0 11:07:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:58 Filter is already there-color wheel unchanged 11:07:58 Received message from Master: op=Shutter serial=272521 11:07:58 Shutter LASER close 11:07:58 Received message from Camera: op=State serial=272523 11:07:58 GetSingleValue result=40 Value=cccccccc 11:07:58 SkyScan query 11:07:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:07:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:59 Parameters OK 11:07:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:59 Set A/D data flow result=40 11:07:59 Set A/D channel type result=40 11:07:59 Set A/D encoding result=40 11:07:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:59 Set channel filter=0.000000e+000 result=40 11:07:59 Config A/D Result=40 11:07:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:59 Get A/D filter: -9.255963e+061 result=40 11:07:59 Get A/D value=-858993460 result=40 11:07:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:59 Parameters OK 11:07:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:59 Set A/D data flow result=40 11:07:59 Set A/D channel type result=40 11:07:59 Set A/D encoding result=40 11:07:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:59 Set channel filter=0.000000e+000 result=40 11:07:59 Config A/D Result=40 11:07:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:59 Get A/D filter: -9.255963e+061 result=40 11:07:59 Get A/D value=-858993460 result=40 11:07:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:59 Aux= 11:07:59 Message to Camera, serial 272523 queued 11:08:35 Received message from Master: op=PointingHead serial=272536 11:08:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:08:35 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:08:36 Point started: ret=0 11:08:36 point_skyscan result=0 11:08:36 Check angles 11:08:36 SkyScan query 11:08:37 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 11:08:37 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 11:08:37 Check angles 11:08:37 SkyScan query 11:08:38 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 11:08:38 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 11:08:38 Check angles 11:08:38 SkyScan query 11:08:39 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 11:08:39 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 11:08:39 Check angles 11:08:39 SkyScan query 11:08:39 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 11:08:39 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 11:08:39 Check angles 11:08:39 SkyScan query 11:08:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:08:40 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:08:40 Check angles 11:08:40 SkyScan query 11:08:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:08:41 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:08:41 Message to Master queued w/err=0: serial=272536 error=0 11:08:46 Received message from Master: op=Filter serial=272537 11:08:46 Color wheel filter change from 0 to 0 11:08:46 FLIGetFilterPos err=0 currentPosition=0 11:08:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:46 Filter is already there-color wheel unchanged 11:08:46 Received message from Master: op=Shutter serial=272538 11:08:46 Shutter LASER close 11:08:46 Received message from Camera: op=State serial=272540 11:08:46 GetSingleValue result=40 Value=cccccccc 11:08:46 SkyScan query 11:08:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:08:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:47 Parameters OK 11:08:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:47 Set A/D data flow result=40 11:08:47 Set A/D channel type result=40 11:08:47 Set A/D encoding result=40 11:08:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:47 Set channel filter=0.000000e+000 result=40 11:08:47 Config A/D Result=40 11:08:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:47 Get A/D filter: -9.255963e+061 result=40 11:08:47 Get A/D value=-858993460 result=40 11:08:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:47 Parameters OK 11:08:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:47 Set A/D data flow result=40 11:08:47 Set A/D channel type result=40 11:08:47 Set A/D encoding result=40 11:08:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:47 Set channel filter=0.000000e+000 result=40 11:08:47 Config A/D Result=40 11:08:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:47 Get A/D filter: -9.255963e+061 result=40 11:08:47 Get A/D value=-858993460 result=40 11:08:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:47 Aux= 11:08:47 Message to Camera, serial 272540 queued 11:09:24 Received message from Master: op=PointingHead serial=272553 11:09:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:09:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:09:24 Point started: ret=0 11:09:24 point_skyscan result=0 11:09:25 Check angles 11:09:25 SkyScan query 11:09:25 SkyScan query done: ret=0 az=153.15<-10210 ze=68.1<-7460 Statuses=0009 0009 11:09:25 Msec=0 True Az=153.15 Ze=68.1 Az status=0009 Ze status=0009 11:09:26 Check angles 11:09:26 SkyScan query 11:09:26 SkyScan query done: ret=0 az=135.375<-9025 ze=89.58<-6028 Statuses=0009 0009 11:09:26 Msec=750 True Az=135.375 Ze=89.58 Az status=0009 Ze status=0009 11:09:26 Check angles 11:09:26 SkyScan query 11:09:27 SkyScan query done: ret=0 az=117.855<-7857 ze=110.445<-4637 Statuses=0009 0009 11:09:27 Msec=1500 True Az=117.855 Ze=110.445 Az status=0009 Ze status=0009 11:09:27 Check angles 11:09:27 SkyScan query 11:09:28 SkyScan query done: ret=0 az=112.995<-7533 ze=131.43<-3238 Statuses=0008 0009 11:09:28 Msec=2250 True Az=112.995 Ze=131.43 Az status=0008 Ze status=0009 11:09:28 Check angles 11:09:28 SkyScan query 11:09:28 SkyScan query done: ret=0 az=112.995<-7533 ze=152.325<-1845 Statuses=0008 0009 11:09:28 Msec=3000 True Az=112.995 Ze=152.325 Az status=0008 Ze status=0009 11:09:29 Check angles 11:09:29 SkyScan query 11:09:29 SkyScan query done: ret=0 az=112.995<-7533 ze=173.34<-444 Statuses=0008 0009 11:09:29 Msec=3750 True Az=112.995 Ze=173.34 Az status=0008 Ze status=0009 11:09:29 Check angles 11:09:29 SkyScan query 11:09:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 11:09:30 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 11:09:30 Message to Master queued w/err=0: serial=272553 error=0 11:09:35 Received message from Master: op=Filter serial=272554 11:09:35 Color wheel filter change from 0 to 0 11:09:35 FLIGetFilterPos err=0 currentPosition=0 11:09:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:35 Filter is already there-color wheel unchanged 11:09:35 Received message from Master: op=Shutter serial=272555 11:09:35 Shutter LASER open 11:09:35 Received message from Camera: op=State serial=272557 11:09:35 GetSingleValue result=40 Value=cccccccc 11:09:35 SkyScan query 11:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:09:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:36 Parameters OK 11:09:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:36 Set A/D data flow result=40 11:09:36 Set A/D channel type result=40 11:09:36 Set A/D encoding result=40 11:09:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:36 Set channel filter=0.000000e+000 result=40 11:09:36 Config A/D Result=40 11:09:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:36 Get A/D filter: -9.255963e+061 result=40 11:09:36 Get A/D value=-858993460 result=40 11:09:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:36 Parameters OK 11:09:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:36 Set A/D data flow result=40 11:09:36 Set A/D channel type result=40 11:09:36 Set A/D encoding result=40 11:09:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:36 Set channel filter=0.000000e+000 result=40 11:09:36 Config A/D Result=40 11:09:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:36 Get A/D filter: -9.255963e+061 result=40 11:09:36 Get A/D value=-858993460 result=40 11:09:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:36 Aux= 11:09:36 Message to Camera, serial 272557 queued 11:09:44 Received message from Master: op=Shutter serial=272567 11:09:44 Shutter LASER close 11:09:45 Received message from Master: op=PointingHead serial=272571 11:09:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:09:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:09:45 Point started: ret=0 11:09:45 point_skyscan result=0 11:09:46 Check angles 11:09:46 SkyScan query 11:09:46 SkyScan query done: ret=0 az=89.64<-5976 ze=156.855<-1543 Statuses=0009 0009 11:09:46 Msec=0 True Az=89.64 Ze=156.855 Az status=0009 Ze status=0009 11:09:47 Check angles 11:09:47 SkyScan query 11:09:47 SkyScan query done: ret=0 az=72.12<-4808 ze=135.855<-2943 Statuses=0009 0009 11:09:47 Msec=750 True Az=72.12 Ze=135.855 Az status=0009 Ze status=0009 11:09:47 Check angles 11:09:47 SkyScan query 11:09:48 SkyScan query done: ret=0 az=54.615<-3641 ze=114.93<-4338 Statuses=0009 0009 11:09:48 Msec=1500 True Az=54.615 Ze=114.93 Az status=0009 Ze status=0009 11:09:48 Check angles 11:09:48 SkyScan query 11:09:49 SkyScan query done: ret=0 az=40.98<-2732 ze=93.525<-5765 Statuses=0009 0009 11:09:49 Msec=2250 True Az=40.98 Ze=93.525 Az status=0009 Ze status=0009 11:09:49 Check angles 11:09:49 SkyScan query 11:09:49 SkyScan query done: ret=0 az=40.995<-2733 ze=72.555<-7163 Statuses=0008 0009 11:09:49 Msec=3000 True Az=40.995 Ze=72.555 Az status=0008 Ze status=0009 11:09:50 Check angles 11:09:50 SkyScan query 11:09:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 11:09:50 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 11:09:50 Check angles 11:09:50 SkyScan query 11:09:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:09:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:09:51 Message to Master queued w/err=0: serial=272571 error=0 11:09:56 Received message from Master: op=Filter serial=272572 11:09:56 Color wheel filter change from 0 to 0 11:09:56 FLIGetFilterPos err=0 currentPosition=0 11:09:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:56 Filter is already there-color wheel unchanged 11:09:56 Received message from Master: op=Shutter serial=272573 11:09:56 Shutter LASER close 11:09:56 Received message from Camera: op=State serial=272575 11:09:56 GetSingleValue result=40 Value=cccccccc 11:09:56 SkyScan query 11:09:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:09:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:57 Parameters OK 11:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:57 Set A/D data flow result=40 11:09:57 Set A/D channel type result=40 11:09:57 Set A/D encoding result=40 11:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:57 Set channel filter=0.000000e+000 result=40 11:09:57 Config A/D Result=40 11:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:57 Get A/D filter: -9.255963e+061 result=40 11:09:57 Get A/D value=-858993460 result=40 11:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:57 Parameters OK 11:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:57 Set A/D data flow result=40 11:09:57 Set A/D channel type result=40 11:09:57 Set A/D encoding result=40 11:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:57 Set channel filter=0.000000e+000 result=40 11:09:57 Config A/D Result=40 11:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:57 Get A/D filter: -9.255963e+061 result=40 11:09:57 Get A/D value=-858993460 result=40 11:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:57 Aux= 11:09:57 Message to Camera, serial 272575 queued 11:10:34 Received message from Master: op=PointingHead serial=272588 11:10:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:10:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:10:34 Point started: ret=0 11:10:34 point_skyscan result=0 11:10:35 Check angles 11:10:35 SkyScan query 11:10:35 SkyScan query done: ret=0 az=64.17<-4278 ze=66.57<-7562 Statuses=0009 0008 11:10:35 Msec=0 True Az=64.17 Ze=66.57 Az status=0009 Ze status=0008 11:10:35 Check angles 11:10:35 SkyScan query 11:10:36 SkyScan query done: ret=0 az=81.54<-5436 ze=66.51<-7566 Statuses=0009 0008 11:10:36 Msec=750 True Az=81.54 Ze=66.51 Az status=0009 Ze status=0008 11:10:36 Check angles 11:10:36 SkyScan query 11:10:37 SkyScan query done: ret=0 az=98.94<-6596 ze=66.51<-7566 Statuses=0009 0008 11:10:37 Msec=1500 True Az=98.94 Ze=66.51 Az status=0009 Ze status=0008 11:10:37 Check angles 11:10:37 SkyScan query 11:10:38 SkyScan query done: ret=0 az=116.505<-7767 ze=66.51<-7566 Statuses=0009 0008 11:10:38 Msec=2250 True Az=116.505 Ze=66.51 Az status=0009 Ze status=0008 11:10:38 Check angles 11:10:38 SkyScan query 11:10:38 SkyScan query done: ret=0 az=133.89<-8926 ze=66.51<-7566 Statuses=0009 0008 11:10:38 Msec=3000 True Az=133.89 Ze=66.51 Az status=0009 Ze status=0008 11:10:38 Check angles 11:10:38 SkyScan query 11:10:39 SkyScan query done: ret=0 az=151.38<-10092 ze=66.51<-7566 Statuses=0009 0008 11:10:39 Msec=3750 True Az=151.38 Ze=66.51 Az status=0009 Ze status=0008 11:10:39 Check angles 11:10:39 SkyScan query 11:10:40 SkyScan query done: ret=0 az=158.04<-10536 ze=66.51<-7566 Statuses=0008 0008 11:10:40 Msec=4500 True Az=158.04 Ze=66.51 Az status=0008 Ze status=0008 11:10:40 Message to Master queued w/err=0: serial=272588 error=0 11:10:45 Received message from Master: op=Filter serial=272589 11:10:45 Color wheel filter change from 0 to 0 11:10:45 FLIGetFilterPos err=0 currentPosition=0 11:10:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:45 Filter is already there-color wheel unchanged 11:10:45 Received message from Master: op=Shutter serial=272590 11:10:45 Shutter LASER close 11:10:45 Received message from Camera: op=State serial=272592 11:10:45 GetSingleValue result=40 Value=cccccccc 11:10:45 SkyScan query 11:10:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 11:10:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:46 Parameters OK 11:10:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:46 Set A/D data flow result=40 11:10:46 Set A/D channel type result=40 11:10:46 Set A/D encoding result=40 11:10:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:46 Set channel filter=0.000000e+000 result=40 11:10:46 Config A/D Result=40 11:10:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:46 Get A/D filter: -9.255963e+061 result=40 11:10:46 Get A/D value=-858993460 result=40 11:10:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:46 Parameters OK 11:10:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:46 Set A/D data flow result=40 11:10:46 Set A/D channel type result=40 11:10:46 Set A/D encoding result=40 11:10:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:46 Set channel filter=0.000000e+000 result=40 11:10:46 Config A/D Result=40 11:10:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:46 Get A/D filter: -9.255963e+061 result=40 11:10:46 Get A/D value=-858993460 result=40 11:10:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:46 Aux= 11:10:46 Message to Camera, serial 272592 queued 11:11:23 Received message from Master: op=PointingHead serial=272605 11:11:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:11:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:11:23 Point started: ret=0 11:11:23 point_skyscan result=0 11:11:24 Check angles 11:11:24 SkyScan query 11:11:24 SkyScan query done: ret=0 az=134.34<-8956 ze=96.75<-5550 Statuses=0009 0009 11:11:24 Msec=0 True Az=134.34 Ze=96.75 Az status=0009 Ze status=0009 11:11:24 Check angles 11:11:24 SkyScan query 11:11:25 SkyScan query done: ret=0 az=130.995<-8733 ze=117.675<-4155 Statuses=0008 0009 11:11:25 Msec=750 True Az=130.995 Ze=117.675 Az status=0008 Ze status=0009 11:11:25 Check angles 11:11:25 SkyScan query 11:11:26 SkyScan query done: ret=0 az=130.995<-8733 ze=138.66<-2756 Statuses=0008 0009 11:11:26 Msec=1500 True Az=130.995 Ze=138.66 Az status=0008 Ze status=0009 11:11:26 Check angles 11:11:26 SkyScan query 11:11:27 SkyScan query done: ret=0 az=130.995<-8733 ze=160.065<-1329 Statuses=0008 0009 11:11:27 Msec=2250 True Az=130.995 Ze=160.065 Az status=0008 Ze status=0009 11:11:27 Check angles 11:11:27 SkyScan query 11:11:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.025<-23935 Statuses=0008 0009 11:11:27 Msec=3000 True Az=130.995 Ze=-179.025 Az status=0008 Ze status=0009 11:11:27 Check angles 11:11:27 SkyScan query 11:11:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.025<-22535 Statuses=0008 0009 11:11:28 Msec=3750 True Az=130.995 Ze=-158.025 Az status=0008 Ze status=0009 11:11:28 Check angles 11:11:28 SkyScan query 11:11:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 11:11:29 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 11:11:29 Check angles 11:11:29 SkyScan query 11:11:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 11:11:30 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 11:11:30 Message to Master queued w/err=0: serial=272605 error=0 11:11:35 Received message from Master: op=Filter serial=272606 11:11:35 Color wheel filter change from 0 to 0 11:11:35 FLIGetFilterPos err=0 currentPosition=0 11:11:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:35 Filter is already there-color wheel unchanged 11:11:35 Received message from Master: op=Shutter serial=272607 11:11:35 Shutter LASER close 11:11:35 Received message from Camera: op=State serial=272609 11:11:35 GetSingleValue result=40 Value=cccccccc 11:11:35 SkyScan query 11:11:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:11:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:35 Parameters OK 11:11:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:35 Set A/D data flow result=40 11:11:35 Set A/D channel type result=40 11:11:35 Set A/D encoding result=40 11:11:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:35 Set channel filter=0.000000e+000 result=40 11:11:35 Config A/D Result=40 11:11:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:35 Get A/D filter: -9.255963e+061 result=40 11:11:35 Get A/D value=-858993460 result=40 11:11:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:35 Parameters OK 11:11:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:35 Set A/D data flow result=40 11:11:35 Set A/D channel type result=40 11:11:35 Set A/D encoding result=40 11:11:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:35 Set channel filter=0.000000e+000 result=40 11:11:35 Config A/D Result=40 11:11:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:35 Get A/D filter: -9.255963e+061 result=40 11:11:35 Get A/D value=-858993460 result=40 11:11:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:35 Aux= 11:11:35 Message to Camera, serial 272609 queued 11:12:12 Received message from Master: op=PointingHead serial=272622 11:12:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:12:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:12:12 Point started: ret=0 11:12:12 point_skyscan result=0 11:12:13 Check angles 11:12:13 SkyScan query 11:12:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0009 0009 11:12:14 Msec=0 True Az=112.995 Ze=-171.435 Az status=0009 Ze status=0009 11:12:14 Check angles 11:12:14 SkyScan query 11:12:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:12:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:12:15 Message to Master queued w/err=0: serial=272622 error=0 11:12:20 Received message from Master: op=Filter serial=272623 11:12:20 Color wheel filter change from 0 to 0 11:12:20 FLIGetFilterPos err=0 currentPosition=0 11:12:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:20 Filter is already there-color wheel unchanged 11:12:20 Received message from Master: op=Shutter serial=272624 11:12:20 Shutter LASER open 11:12:20 Received message from Camera: op=State serial=272626 11:12:20 GetSingleValue result=40 Value=cccccccc 11:12:20 SkyScan query 11:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:12:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:21 Parameters OK 11:12:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:21 Set A/D data flow result=40 11:12:21 Set A/D channel type result=40 11:12:21 Set A/D encoding result=40 11:12:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:21 Set channel filter=0.000000e+000 result=40 11:12:21 Config A/D Result=40 11:12:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:21 Get A/D filter: -9.255963e+061 result=40 11:12:21 Get A/D value=-858993460 result=40 11:12:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:21 Parameters OK 11:12:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:21 Set A/D data flow result=40 11:12:21 Set A/D channel type result=40 11:12:21 Set A/D encoding result=40 11:12:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:21 Set channel filter=0.000000e+000 result=40 11:12:21 Config A/D Result=40 11:12:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:21 Get A/D filter: -9.255963e+061 result=40 11:12:21 Get A/D value=-858993460 result=40 11:12:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:21 Aux= 11:12:21 Message to Camera, serial 272626 queued 11:12:29 Received message from Master: op=Shutter serial=272636 11:12:29 Shutter LASER close 11:12:30 Received message from Master: op=PointingHead serial=272640 11:12:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:12:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:12:30 Point started: ret=0 11:12:30 point_skyscan result=0 11:12:31 Check angles 11:12:31 SkyScan query 11:12:31 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.34<-21556 Statuses=0009 0009 11:12:31 Msec=0 True Az=135.825 Ze=-143.34 Az status=0009 Ze status=0009 11:12:31 Check angles 11:12:31 SkyScan query 11:12:32 SkyScan query done: ret=0 az=153.33<-10222 ze=-122.385<-20159 Statuses=0009 0009 11:12:32 Msec=750 True Az=153.33 Ze=-122.385 Az status=0009 Ze status=0009 11:12:32 Check angles 11:12:32 SkyScan query 11:12:33 SkyScan query done: ret=0 az=171.165<-11411 ze=-100.98<-18732 Statuses=0009 0009 11:12:33 Msec=1500 True Az=171.165 Ze=-100.98 Az status=0009 Ze status=0009 11:12:33 Check angles 11:12:33 SkyScan query 11:12:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.1<-17340 Statuses=0008 0009 11:12:33 Msec=2250 True Az=175.995 Ze=-80.1 Az status=0008 Ze status=0009 11:12:34 Check angles 11:12:34 SkyScan query 11:12:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.605<-15907 Statuses=0008 0009 11:12:34 Msec=3000 True Az=176.01 Ze=-58.605 Az status=0008 Ze status=0009 11:12:34 Check angles 11:12:34 SkyScan query 11:12:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:12:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:12:35 Message to Master queued w/err=0: serial=272640 error=0 11:12:40 Received message from Master: op=Filter serial=272641 11:12:40 Color wheel filter change from 0 to 0 11:12:40 FLIGetFilterPos err=0 currentPosition=0 11:12:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:40 Filter is already there-color wheel unchanged 11:12:40 Received message from Master: op=Shutter serial=272642 11:12:40 Shutter LASER close 11:12:40 Received message from Camera: op=State serial=272644 11:12:40 GetSingleValue result=40 Value=cccccccc 11:12:40 SkyScan query 11:12:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:12:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:41 Parameters OK 11:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:41 Set A/D data flow result=40 11:12:41 Set A/D channel type result=40 11:12:41 Set A/D encoding result=40 11:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:41 Set channel filter=0.000000e+000 result=40 11:12:41 Config A/D Result=40 11:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:41 Get A/D filter: -9.255963e+061 result=40 11:12:41 Get A/D value=-858993460 result=40 11:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:41 Parameters OK 11:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:41 Set A/D data flow result=40 11:12:41 Set A/D channel type result=40 11:12:41 Set A/D encoding result=40 11:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:41 Set channel filter=0.000000e+000 result=40 11:12:41 Config A/D Result=40 11:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:41 Get A/D filter: -9.255963e+061 result=40 11:12:41 Get A/D value=-858993460 result=40 11:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:41 Aux= 11:12:41 Message to Camera, serial 272644 queued 11:13:18 Received message from Master: op=PointingHead serial=272657 11:13:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:13:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:13:18 Point started: ret=0 11:13:18 point_skyscan result=0 11:13:19 Check angles 11:13:19 SkyScan query 11:13:19 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.66<-13444 Statuses=0009 0009 11:13:19 Msec=0 True Az=152.97 Ze=-21.66 Az status=0009 Ze status=0009 11:13:20 Check angles 11:13:20 SkyScan query 11:13:20 SkyScan query done: ret=0 az=135.06<-9004 ze=-0.255<-12017 Statuses=0009 0009 11:13:20 Msec=750 True Az=135.06 Ze=-0.255 Az status=0009 Ze status=0009 11:13:20 Check angles 11:13:20 SkyScan query 11:13:21 SkyScan query done: ret=0 az=117.585<-7839 ze=20.715<-10619 Statuses=0009 0009 11:13:21 Msec=1500 True Az=117.585 Ze=20.715 Az status=0009 Ze status=0009 11:13:21 Check angles 11:13:21 SkyScan query 11:13:22 SkyScan query done: ret=0 az=100.185<-6679 ze=41.64<-9224 Statuses=0009 0009 11:13:22 Msec=2250 True Az=100.185 Ze=41.64 Az status=0009 Ze status=0009 11:13:22 Check angles 11:13:22 SkyScan query 11:13:22 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 11:13:22 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 11:13:23 Check angles 11:13:23 SkyScan query 11:13:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:13:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:13:23 Message to Master queued w/err=0: serial=272657 error=0 11:13:28 Received message from Master: op=Filter serial=272658 11:13:28 Color wheel filter change from 0 to 0 11:13:28 FLIGetFilterPos err=0 currentPosition=0 11:13:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:28 Filter is already there-color wheel unchanged 11:13:28 Received message from Master: op=Shutter serial=272659 11:13:28 Shutter LASER close 11:13:29 Received message from Camera: op=State serial=272661 11:13:29 GetSingleValue result=40 Value=cccccccc 11:13:29 SkyScan query 11:13:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:13:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:29 Parameters OK 11:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:29 Set A/D data flow result=40 11:13:29 Set A/D channel type result=40 11:13:29 Set A/D encoding result=40 11:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:29 Set channel filter=0.000000e+000 result=40 11:13:29 Config A/D Result=40 11:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:29 Get A/D filter: -9.255963e+061 result=40 11:13:29 Get A/D value=-858993460 result=40 11:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:29 Parameters OK 11:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:29 Set A/D data flow result=40 11:13:29 Set A/D channel type result=40 11:13:29 Set A/D encoding result=40 11:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:29 Set channel filter=0.000000e+000 result=40 11:13:29 Config A/D Result=40 11:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:29 Get A/D filter: -9.255963e+061 result=40 11:13:29 Get A/D value=-858993460 result=40 11:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:29 Aux= 11:13:29 Message to Camera, serial 272661 queued 11:14:06 Received message from Master: op=PointingHead serial=272674 11:14:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:14:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:14:06 Point started: ret=0 11:14:06 point_skyscan result=0 11:14:07 Check angles 11:14:07 SkyScan query 11:14:08 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 11:14:08 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 11:14:08 Check angles 11:14:08 SkyScan query 11:14:08 SkyScan query done: ret=0 az=127.185<-8479 ze=38.505<-9433 Statuses=0009 0008 11:14:08 Msec=750 True Az=127.185 Ze=38.505 Az status=0009 Ze status=0008 11:14:09 Check angles 11:14:09 SkyScan query 11:14:09 SkyScan query done: ret=0 az=144.585<-9639 ze=38.505<-9433 Statuses=0009 0008 11:14:09 Msec=1500 True Az=144.585 Ze=38.505 Az status=0009 Ze status=0008 11:14:09 Check angles 11:14:09 SkyScan query 11:14:10 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 11:14:10 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 11:14:10 Check angles 11:14:10 SkyScan query 11:14:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:14:11 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:14:11 Check angles 11:14:11 SkyScan query 11:14:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:14:11 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:14:11 Message to Master queued w/err=0: serial=272674 error=0 11:14:16 Received message from Master: op=Filter serial=272675 11:14:16 Color wheel filter change from 0 to 0 11:14:16 FLIGetFilterPos err=0 currentPosition=0 11:14:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:16 Filter is already there-color wheel unchanged 11:14:17 Received message from Master: op=Shutter serial=272676 11:14:17 Shutter LASER close 11:14:17 Received message from Camera: op=State serial=272678 11:14:17 GetSingleValue result=40 Value=cccccccc 11:14:17 SkyScan query 11:14:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:14:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:17 Parameters OK 11:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:17 Set A/D data flow result=40 11:14:17 Set A/D channel type result=40 11:14:17 Set A/D encoding result=40 11:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:17 Set channel filter=0.000000e+000 result=40 11:14:17 Config A/D Result=40 11:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:17 Get A/D filter: -9.255963e+061 result=40 11:14:17 Get A/D value=-858993460 result=40 11:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:17 Parameters OK 11:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:17 Set A/D data flow result=40 11:14:17 Set A/D channel type result=40 11:14:17 Set A/D encoding result=40 11:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:17 Set channel filter=0.000000e+000 result=40 11:14:17 Config A/D Result=40 11:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:17 Get A/D filter: -9.255963e+061 result=40 11:14:17 Get A/D value=-858993460 result=40 11:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:17 Aux= 11:14:17 Message to Camera, serial 272678 queued 11:14:54 Received message from Master: op=PointingHead serial=272691 11:14:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:14:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:14:54 Point started: ret=0 11:14:55 point_skyscan result=0 11:14:55 Check angles 11:14:55 SkyScan query 11:14:56 SkyScan query done: ret=0 az=152.64<-10176 ze=68.835<-7411 Statuses=0009 0009 11:14:56 Msec=0 True Az=152.64 Ze=68.835 Az status=0009 Ze status=0009 11:14:56 Check angles 11:14:56 SkyScan query 11:14:57 SkyScan query done: ret=0 az=135.06<-9004 ze=89.835<-6011 Statuses=0009 0009 11:14:57 Msec=750 True Az=135.06 Ze=89.835 Az status=0009 Ze status=0009 11:14:57 Check angles 11:14:57 SkyScan query 11:14:57 SkyScan query done: ret=0 az=117.63<-7842 ze=110.73<-4618 Statuses=0009 0009 11:14:57 Msec=1500 True Az=117.63 Ze=110.73 Az status=0009 Ze status=0009 11:14:58 Check angles 11:14:58 SkyScan query 11:14:58 SkyScan query done: ret=0 az=112.995<-7533 ze=131.745<-3217 Statuses=0008 0009 11:14:58 Msec=2250 True Az=112.995 Ze=131.745 Az status=0008 Ze status=0009 11:14:58 Check angles 11:14:58 SkyScan query 11:14:59 SkyScan query done: ret=0 az=112.995<-7533 ze=152.685<-1821 Statuses=0008 0009 11:14:59 Msec=3000 True Az=112.995 Ze=152.685 Az status=0008 Ze status=0009 11:14:59 Check angles 11:14:59 SkyScan query 11:15:00 SkyScan query done: ret=0 az=112.995<-7533 ze=173.655<-423 Statuses=0008 0009 11:15:00 Msec=3750 True Az=112.995 Ze=173.655 Az status=0008 Ze status=0009 11:15:00 Check angles 11:15:00 SkyScan query 11:15:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.92<-23528 Statuses=0008 0008 11:15:00 Msec=4500 True Az=112.995 Ze=-172.92 Az status=0008 Ze status=0008 11:15:00 Message to Master queued w/err=0: serial=272691 error=0 11:15:05 Received message from Master: op=Filter serial=272692 11:15:05 Color wheel filter change from 0 to 0 11:15:05 FLIGetFilterPos err=0 currentPosition=0 11:15:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:05 Filter is already there-color wheel unchanged 11:15:06 Received message from Master: op=Shutter serial=272693 11:15:06 Shutter LASER open 11:15:06 Received message from Camera: op=State serial=272695 11:15:06 GetSingleValue result=40 Value=cccccccc 11:15:06 SkyScan query 11:15:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:15:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:06 Parameters OK 11:15:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:06 Set A/D data flow result=40 11:15:06 Set A/D channel type result=40 11:15:06 Set A/D encoding result=40 [UTC 2018-12-19 11:15:06] 11:15:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:06 Set channel filter=0.000000e+000 result=40 11:15:06 Config A/D Result=40 11:15:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:06 Get A/D filter: -9.255963e+061 result=40 11:15:06 Get A/D value=-858993460 result=40 11:15:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:06 Parameters OK 11:15:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:06 Set A/D data flow result=40 11:15:06 Set A/D channel type result=40 11:15:06 Set A/D encoding result=40 11:15:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:06 Set channel filter=0.000000e+000 result=40 11:15:06 Config A/D Result=40 11:15:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:06 Get A/D filter: -9.255963e+061 result=40 11:15:06 Get A/D value=-858993460 result=40 11:15:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:06 Aux= 11:15:06 Message to Camera, serial 272695 queued 11:15:15 Received message from Master: op=Shutter serial=272705 11:15:15 Shutter LASER close 11:15:15 Received message from Master: op=PointingHead serial=272709 11:15:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:15:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:15:15 Point started: ret=0 11:15:15 point_skyscan result=0 11:15:16 Check angles 11:15:16 SkyScan query 11:15:17 SkyScan query done: ret=0 az=89.895<-5993 ze=157.245<-1517 Statuses=0009 0009 11:15:17 Msec=0 True Az=89.895 Ze=157.245 Az status=0009 Ze status=0009 11:15:17 Check angles 11:15:17 SkyScan query 11:15:18 SkyScan query done: ret=0 az=72.105<-4807 ze=135.855<-2943 Statuses=0009 0009 11:15:18 Msec=750 True Az=72.105 Ze=135.855 Az status=0009 Ze status=0009 11:15:18 Check angles 11:15:18 SkyScan query 11:15:18 SkyScan query done: ret=0 az=54.36<-3624 ze=114.42<-4372 Statuses=0009 0009 11:15:18 Msec=1500 True Az=54.36 Ze=114.42 Az status=0009 Ze status=0009 11:15:19 Check angles 11:15:19 SkyScan query 11:15:19 SkyScan query done: ret=0 az=40.98<-2732 ze=93.495<-5767 Statuses=0009 0009 11:15:19 Msec=2250 True Az=40.98 Ze=93.495 Az status=0009 Ze status=0009 11:15:19 Check angles 11:15:19 SkyScan query 11:15:20 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 11:15:20 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 11:15:20 Check angles 11:15:20 SkyScan query 11:15:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 11:15:21 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 11:15:21 Check angles 11:15:21 SkyScan query 11:15:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:15:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:15:21 Message to Master queued w/err=0: serial=272709 error=0 11:15:26 Received message from Master: op=Filter serial=272710 11:15:26 Color wheel filter change from 0 to 0 11:15:26 FLIGetFilterPos err=0 currentPosition=0 11:15:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:26 Filter is already there-color wheel unchanged 11:15:27 Received message from Master: op=Shutter serial=272711 11:15:27 Shutter LASER close 11:15:27 Received message from Camera: op=State serial=272713 11:15:27 GetSingleValue result=40 Value=cccccccc 11:15:27 SkyScan query 11:15:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:15:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:27 Parameters OK 11:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:27 Set A/D data flow result=40 11:15:27 Set A/D channel type result=40 11:15:27 Set A/D encoding result=40 11:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:27 Set channel filter=0.000000e+000 result=40 11:15:27 Config A/D Result=40 11:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:27 Get A/D filter: -9.255963e+061 result=40 11:15:27 Get A/D value=-858993460 result=40 11:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:27 Parameters OK 11:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:27 Set A/D data flow result=40 11:15:27 Set A/D channel type result=40 11:15:27 Set A/D encoding result=40 11:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:27 Set channel filter=0.000000e+000 result=40 11:15:27 Config A/D Result=40 11:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:27 Get A/D filter: -9.255963e+061 result=40 11:15:27 Get A/D value=-858993460 result=40 11:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:27 Aux= 11:15:27 Message to Camera, serial 272713 queued 11:15:27 Received message from Master: op=Identify serial=272714 [UTC 2018-12-19 11:15:52] 11:16:04 Received message from Master: op=PointingHead serial=272729 11:16:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:16:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:16:04 Point started: ret=0 11:16:04 point_skyscan result=0 11:16:05 Check angles 11:16:05 SkyScan query 11:16:06 SkyScan query done: ret=0 az=63.855<-4257 ze=66.555<-7563 Statuses=0009 0008 11:16:06 Msec=0 True Az=63.855 Ze=66.555 Az status=0009 Ze status=0008 11:16:06 Check angles 11:16:06 SkyScan query 11:16:07 SkyScan query done: ret=0 az=81.165<-5411 ze=66.495<-7567 Statuses=0009 0008 11:16:07 Msec=750 True Az=81.165 Ze=66.495 Az status=0009 Ze status=0008 11:16:07 Check angles 11:16:07 SkyScan query 11:16:07 SkyScan query done: ret=0 az=98.655<-6577 ze=66.495<-7567 Statuses=0009 0008 11:16:07 Msec=1500 True Az=98.655 Ze=66.495 Az status=0009 Ze status=0008 11:16:07 Check angles 11:16:07 SkyScan query 11:16:08 SkyScan query done: ret=0 az=116.13<-7742 ze=66.495<-7567 Statuses=0009 0008 11:16:08 Msec=2250 True Az=116.13 Ze=66.495 Az status=0009 Ze status=0008 11:16:08 Check angles 11:16:08 SkyScan query 11:16:09 SkyScan query done: ret=0 az=133.56<-8904 ze=66.495<-7567 Statuses=0009 0008 11:16:09 Msec=3000 True Az=133.56 Ze=66.495 Az status=0009 Ze status=0008 11:16:09 Check angles 11:16:09 SkyScan query 11:16:10 SkyScan query done: ret=0 az=151.155<-10077 ze=66.495<-7567 Statuses=0009 0008 11:16:10 Msec=3750 True Az=151.155 Ze=66.495 Az status=0009 Ze status=0008 11:16:10 Check angles 11:16:10 SkyScan query 11:16:10 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:16:10 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:16:10 Message to Master queued w/err=0: serial=272729 error=0 11:16:15 Received message from Master: op=Filter serial=272730 11:16:15 Color wheel filter change from 0 to 0 11:16:15 FLIGetFilterPos err=0 currentPosition=0 11:16:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:15 Filter is already there-color wheel unchanged 11:16:15 Received message from Master: op=Shutter serial=272731 11:16:15 Shutter LASER close 11:16:15 Received message from Camera: op=State serial=272733 11:16:15 GetSingleValue result=40 Value=cccccccc 11:16:15 SkyScan query 11:16:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:16 Parameters OK 11:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:16 Set A/D data flow result=40 11:16:16 Set A/D channel type result=40 11:16:16 Set A/D encoding result=40 11:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:16 Set channel filter=0.000000e+000 result=40 11:16:16 Config A/D Result=40 11:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:16 Get A/D filter: -9.255963e+061 result=40 11:16:16 Get A/D value=-858993460 result=40 11:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:16 Parameters OK 11:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:16 Set A/D data flow result=40 11:16:16 Set A/D channel type result=40 11:16:16 Set A/D encoding result=40 11:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:16 Set channel filter=0.000000e+000 result=40 11:16:16 Config A/D Result=40 11:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:16 Get A/D filter: -9.255963e+061 result=40 11:16:16 Get A/D value=-858993460 result=40 11:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:16 Aux= 11:16:16 Message to Camera, serial 272733 queued 11:16:53 Received message from Master: op=PointingHead serial=272746 11:16:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:16:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:16:53 Point started: ret=0 11:16:53 point_skyscan result=0 11:16:54 Check angles 11:16:54 SkyScan query 11:16:55 SkyScan query done: ret=0 az=134.985<-8999 ze=96.36<-5576 Statuses=0009 0009 11:16:55 Msec=0 True Az=134.985 Ze=96.36 Az status=0009 Ze status=0009 11:16:55 Check angles 11:16:55 SkyScan query 11:16:55 SkyScan query done: ret=0 az=130.995<-8733 ze=117.24<-4184 Statuses=0008 0009 11:16:55 Msec=750 True Az=130.995 Ze=117.24 Az status=0008 Ze status=0009 11:16:56 Check angles 11:16:56 SkyScan query 11:16:56 SkyScan query done: ret=0 az=130.995<-8733 ze=138.66<-2756 Statuses=0008 0009 11:16:56 Msec=1500 True Az=130.995 Ze=138.66 Az status=0008 Ze status=0009 11:16:56 Check angles 11:16:56 SkyScan query 11:16:57 SkyScan query done: ret=0 az=130.995<-8733 ze=159.615<-1359 Statuses=0008 0009 11:16:57 Msec=2250 True Az=130.995 Ze=159.615 Az status=0008 Ze status=0009 11:16:57 Check angles 11:16:57 SkyScan query 11:16:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.445<-23963 Statuses=0008 0009 11:16:58 Msec=3000 True Az=130.995 Ze=-179.445 Az status=0008 Ze status=0009 11:16:58 Check angles 11:16:58 SkyScan query 11:16:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.04<-22536 Statuses=0008 0009 11:16:58 Msec=3750 True Az=130.995 Ze=-158.04 Az status=0008 Ze status=0009 11:16:59 Check angles 11:16:59 SkyScan query 11:16:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 11:16:59 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 11:16:59 Check angles 11:16:59 SkyScan query 11:17:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 11:17:00 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 11:17:00 Message to Master queued w/err=0: serial=272746 error=0 11:17:05 Received message from Master: op=Filter serial=272747 11:17:05 Color wheel filter change from 0 to 0 11:17:05 FLIGetFilterPos err=0 currentPosition=0 11:17:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:05 Filter is already there-color wheel unchanged 11:17:05 Received message from Master: op=Shutter serial=272748 11:17:05 Shutter LASER close 11:17:05 Received message from Camera: op=State serial=272750 11:17:05 GetSingleValue result=40 Value=cccccccc 11:17:05 SkyScan query 11:17:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:17:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:06 Parameters OK 11:17:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:06 Set A/D data flow result=40 11:17:06 Set A/D channel type result=40 11:17:06 Set A/D encoding result=40 11:17:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:06 Set channel filter=0.000000e+000 result=40 11:17:06 Config A/D Result=40 11:17:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:06 Get A/D filter: -9.255963e+061 result=40 11:17:06 Get A/D value=-858993460 result=40 11:17:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:06 Parameters OK 11:17:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:06 Set A/D data flow result=40 11:17:06 Set A/D channel type result=40 11:17:06 Set A/D encoding result=40 11:17:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:06 Set channel filter=0.000000e+000 result=40 11:17:06 Config A/D Result=40 11:17:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:06 Get A/D filter: -9.255963e+061 result=40 11:17:06 Get A/D value=-858993460 result=40 11:17:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:06 Aux= 11:17:06 Message to Camera, serial 272750 queued 11:17:43 Received message from Master: op=PointingHead serial=272763 11:17:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:17:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:17:43 Point started: ret=0 11:17:43 point_skyscan result=0 11:17:44 Check angles 11:17:44 SkyScan query 11:17:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.315<-23421 Statuses=0009 0009 11:17:44 Msec=0 True Az=112.995 Ze=-171.315 Az status=0009 Ze status=0009 11:17:44 Check angles 11:17:44 SkyScan query 11:17:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:17:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:17:45 Message to Master queued w/err=0: serial=272763 error=0 11:17:50 Received message from Master: op=Filter serial=272764 11:17:50 Color wheel filter change from 0 to 0 11:17:50 FLIGetFilterPos err=0 currentPosition=0 11:17:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:50 Filter is already there-color wheel unchanged 11:17:50 Received message from Master: op=Shutter serial=272765 11:17:50 Shutter LASER open 11:17:50 Received message from Camera: op=State serial=272767 11:17:50 GetSingleValue result=40 Value=cccccccc 11:17:50 SkyScan query 11:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:17:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:51 Parameters OK 11:17:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:51 Set A/D data flow result=40 11:17:51 Set A/D channel type result=40 11:17:51 Set A/D encoding result=40 11:17:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:51 Set channel filter=0.000000e+000 result=40 11:17:51 Config A/D Result=40 11:17:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:51 Get A/D filter: -9.255963e+061 result=40 11:17:51 Get A/D value=-858993460 result=40 11:17:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:51 Parameters OK 11:17:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:51 Set A/D data flow result=40 11:17:51 Set A/D channel type result=40 11:17:51 Set A/D encoding result=40 11:17:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:51 Set channel filter=0.000000e+000 result=40 11:17:51 Config A/D Result=40 11:17:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:51 Get A/D filter: -9.255963e+061 result=40 11:17:51 Get A/D value=-858993460 result=40 11:17:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:51 Aux= 11:17:51 Message to Camera, serial 272767 queued 11:17:59 Received message from Master: op=Shutter serial=272777 11:18:00 Shutter LASER close 11:18:00 Received message from Master: op=PointingHead serial=272781 11:18:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:18:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:18:00 Point started: ret=0 11:18:00 point_skyscan result=0 11:18:01 Check angles 11:18:01 SkyScan query 11:18:02 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.295<-21553 Statuses=0009 0009 11:18:02 Msec=0 True Az=135.915 Ze=-143.295 Az status=0009 Ze status=0009 11:18:02 Check angles 11:18:02 SkyScan query 11:18:03 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.325<-20155 Statuses=0009 0009 11:18:03 Msec=750 True Az=153.48 Ze=-122.325 Az status=0009 Ze status=0009 11:18:03 Check angles 11:18:03 SkyScan query 11:18:03 SkyScan query done: ret=0 az=170.94<-11396 ze=-101.43<-18762 Statuses=0009 0009 11:18:03 Msec=1500 True Az=170.94 Ze=-101.43 Az status=0009 Ze status=0009 11:18:03 Check angles 11:18:03 SkyScan query 11:18:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.445<-17363 Statuses=0008 0009 11:18:04 Msec=2250 True Az=175.995 Ze=-80.445 Az status=0008 Ze status=0009 11:18:04 Check angles 11:18:04 SkyScan query 11:18:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.46<-15964 Statuses=0008 0009 11:18:05 Msec=3000 True Az=175.995 Ze=-59.46 Az status=0008 Ze status=0009 11:18:05 Check angles 11:18:05 SkyScan query 11:18:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:18:06 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:18:06 Message to Master queued w/err=0: serial=272781 error=0 11:18:11 Received message from Master: op=Filter serial=272782 11:18:11 Color wheel filter change from 0 to 0 11:18:11 FLIGetFilterPos err=0 currentPosition=0 11:18:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:11 Filter is already there-color wheel unchanged 11:18:11 Received message from Master: op=Shutter serial=272783 11:18:11 Shutter LASER close 11:18:11 Received message from Camera: op=State serial=272785 11:18:11 GetSingleValue result=40 Value=cccccccc 11:18:11 SkyScan query 11:18:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:18:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:11 Parameters OK 11:18:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:11 Set A/D data flow result=40 11:18:11 Set A/D channel type result=40 11:18:11 Set A/D encoding result=40 11:18:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:11 Set channel filter=0.000000e+000 result=40 11:18:11 Config A/D Result=40 11:18:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:11 Get A/D filter: -9.255963e+061 result=40 11:18:11 Get A/D value=-858993460 result=40 11:18:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:11 Parameters OK 11:18:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:11 Set A/D data flow result=40 11:18:11 Set A/D channel type result=40 11:18:11 Set A/D encoding result=40 11:18:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:11 Set channel filter=0.000000e+000 result=40 11:18:11 Config A/D Result=40 11:18:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:11 Get A/D filter: -9.255963e+061 result=40 11:18:11 Get A/D value=-858993460 result=40 11:18:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:11 Aux= 11:18:11 Message to Camera, serial 272785 queued 11:18:48 Received message from Master: op=PointingHead serial=272798 11:18:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:18:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:18:49 Point started: ret=0 11:18:49 point_skyscan result=0 11:18:49 Check angles 11:18:49 SkyScan query 11:18:50 SkyScan query done: ret=0 az=152.55<-10170 ze=-21.165<-13411 Statuses=0009 0009 11:18:50 Msec=0 True Az=152.55 Ze=-21.165 Az status=0009 Ze status=0009 11:18:50 Check angles 11:18:50 SkyScan query 11:18:51 SkyScan query done: ret=0 az=135.045<-9003 ze=-0.24<-12016 Statuses=0009 0009 11:18:51 Msec=750 True Az=135.045 Ze=-0.24 Az status=0009 Ze status=0009 11:18:51 Check angles 11:18:51 SkyScan query 11:18:51 SkyScan query done: ret=0 az=117.57<-7838 ze=20.715<-10619 Statuses=0009 0009 11:18:51 Msec=1500 True Az=117.57 Ze=20.715 Az status=0009 Ze status=0009 11:18:52 Check angles 11:18:52 SkyScan query 11:18:52 SkyScan query done: ret=0 az=99.78<-6652 ze=42.09<-9194 Statuses=0009 0009 11:18:52 Msec=2250 True Az=99.78 Ze=42.09 Az status=0009 Ze status=0009 11:18:52 Check angles 11:18:52 SkyScan query 11:18:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 11:18:53 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 11:18:53 Check angles 11:18:53 SkyScan query 11:18:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:18:54 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 11:18:54 Message to Master queued w/err=0: serial=272798 error=0 11:18:59 Received message from Master: op=Filter serial=272799 11:18:59 Color wheel filter change from 0 to 0 11:18:59 FLIGetFilterPos err=0 currentPosition=0 11:18:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:59 Filter is already there-color wheel unchanged 11:18:59 Received message from Master: op=Shutter serial=272800 11:18:59 Shutter LASER close 11:18:59 Received message from Camera: op=State serial=272802 11:18:59 GetSingleValue result=40 Value=cccccccc 11:18:59 SkyScan query 11:19:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:19:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:00 Parameters OK 11:19:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:00 Set A/D data flow result=40 11:19:00 Set A/D channel type result=40 11:19:00 Set A/D encoding result=40 11:19:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:00 Set channel filter=0.000000e+000 result=40 11:19:00 Config A/D Result=40 11:19:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:00 Get A/D filter: -9.255963e+061 result=40 11:19:00 Get A/D value=-858993460 result=40 11:19:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:00 Parameters OK 11:19:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:00 Set A/D data flow result=40 11:19:00 Set A/D channel type result=40 11:19:00 Set A/D encoding result=40 11:19:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:00 Set channel filter=0.000000e+000 result=40 11:19:00 Config A/D Result=40 11:19:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:00 Get A/D filter: -9.255963e+061 result=40 11:19:00 Get A/D value=-858993460 result=40 11:19:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:00 Aux= 11:19:00 Message to Camera, serial 272802 queued 11:19:36 Received message from Master: op=PointingHead serial=272815 11:19:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:19:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:19:37 Point started: ret=0 11:19:37 point_skyscan result=0 11:19:37 Check angles 11:19:37 SkyScan query 11:19:38 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 11:19:38 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 11:19:38 Check angles 11:19:38 SkyScan query 11:19:39 SkyScan query done: ret=0 az=126.555<-8437 ze=38.505<-9433 Statuses=0009 0008 11:19:39 Msec=750 True Az=126.555 Ze=38.505 Az status=0009 Ze status=0008 11:19:39 Check angles 11:19:39 SkyScan query 11:19:40 SkyScan query done: ret=0 az=144.375<-9625 ze=38.505<-9433 Statuses=0009 0008 11:19:40 Msec=1500 True Az=144.375 Ze=38.505 Az status=0009 Ze status=0008 11:19:40 Check angles 11:19:40 SkyScan query 11:19:40 SkyScan query done: ret=0 az=161.91<-10794 ze=38.505<-9433 Statuses=0009 0008 11:19:40 Msec=2250 True Az=161.91 Ze=38.505 Az status=0009 Ze status=0008 11:19:40 Check angles 11:19:40 SkyScan query 11:19:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:19:41 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:19:41 Check angles 11:19:41 SkyScan query 11:19:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:19:42 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:19:42 Message to Master queued w/err=0: serial=272815 error=0 11:19:47 Received message from Master: op=Filter serial=272816 11:19:47 Color wheel filter change from 0 to 0 11:19:47 FLIGetFilterPos err=0 currentPosition=0 11:19:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:47 Filter is already there-color wheel unchanged 11:19:47 Received message from Master: op=Shutter serial=272817 11:19:47 Shutter LASER close 11:19:47 Received message from Camera: op=State serial=272819 11:19:47 GetSingleValue result=40 Value=cccccccc 11:19:47 SkyScan query 11:19:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:19:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:48 Parameters OK 11:19:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:48 Set A/D data flow result=40 11:19:48 Set A/D channel type result=40 11:19:48 Set A/D encoding result=40 11:19:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:48 Set channel filter=0.000000e+000 result=40 11:19:48 Config A/D Result=40 11:19:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:48 Get A/D filter: -9.255963e+061 result=40 11:19:48 Get A/D value=-858993460 result=40 11:19:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:48 Parameters OK 11:19:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:48 Set A/D data flow result=40 11:19:48 Set A/D channel type result=40 11:19:48 Set A/D encoding result=40 11:19:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:48 Set channel filter=0.000000e+000 result=40 11:19:48 Config A/D Result=40 11:19:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:48 Get A/D filter: -9.255963e+061 result=40 11:19:48 Get A/D value=-858993460 result=40 11:19:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:48 Aux= 11:19:48 Message to Camera, serial 272819 queued 11:20:24 Received message from Master: op=PointingHead serial=272831 11:20:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:20:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:20:24 Point started: ret=0 11:20:24 point_skyscan result=0 11:20:25 Check angles 11:20:25 SkyScan query 11:20:25 SkyScan query done: ret=0 az=152.97<-10198 ze=68.22<-7452 Statuses=0009 0009 11:20:25 Msec=0 True Az=152.97 Ze=68.22 Az status=0009 Ze status=0009 11:20:25 Check angles 11:20:25 SkyScan query 11:20:26 SkyScan query done: ret=0 az=135.405<-9027 ze=89.25<-6050 Statuses=0009 0009 11:20:26 Msec=750 True Az=135.405 Ze=89.25 Az status=0009 Ze status=0009 11:20:26 Check angles 11:20:26 SkyScan query 11:20:27 SkyScan query done: ret=0 az=117.645<-7843 ze=110.565<-4629 Statuses=0009 0009 11:20:27 Msec=1500 True Az=117.645 Ze=110.565 Az status=0009 Ze status=0009 11:20:27 Check angles 11:20:27 SkyScan query 11:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=131.55<-3230 Statuses=0008 0009 11:20:28 Msec=2250 True Az=112.995 Ze=131.55 Az status=0008 Ze status=0009 11:20:28 Check angles 11:20:28 SkyScan query 11:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=152.46<-1836 Statuses=0008 0009 11:20:28 Msec=3000 True Az=112.995 Ze=152.46 Az status=0008 Ze status=0009 11:20:28 Check angles 11:20:28 SkyScan query 11:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=173.88<-408 Statuses=0008 0009 11:20:29 Msec=3750 True Az=112.995 Ze=173.88 Az status=0008 Ze status=0009 11:20:29 Check angles 11:20:29 SkyScan query 11:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 11:20:30 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 11:20:30 Message to Master queued w/err=0: serial=272831 error=0 11:20:35 Received message from Master: op=Filter serial=272832 11:20:35 Color wheel filter change from 0 to 0 11:20:35 FLIGetFilterPos err=0 currentPosition=0 11:20:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:35 Filter is already there-color wheel unchanged 11:20:35 Received message from Master: op=Shutter serial=272833 11:20:35 Shutter LASER open 11:20:35 Received message from Camera: op=State serial=272835 11:20:35 GetSingleValue result=40 Value=cccccccc 11:20:35 SkyScan query 11:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:20:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:36 Parameters OK 11:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:36 Set A/D data flow result=40 11:20:36 Set A/D channel type result=40 11:20:36 Set A/D encoding result=40 11:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:36 Set channel filter=0.000000e+000 result=40 11:20:36 Config A/D Result=40 11:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:36 Get A/D filter: -9.255963e+061 result=40 11:20:36 Get A/D value=-858993460 result=40 11:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:36 Parameters OK 11:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:36 Set A/D data flow result=40 11:20:36 Set A/D channel type result=40 11:20:36 Set A/D encoding result=40 11:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:36 Set channel filter=0.000000e+000 result=40 11:20:36 Config A/D Result=40 11:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:36 Get A/D filter: -9.255963e+061 result=40 11:20:36 Get A/D value=-858993460 result=40 11:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:36 Aux= 11:20:36 Message to Camera, serial 272835 queued 11:20:44 Received message from Master: op=Shutter serial=272845 11:20:44 Shutter LASER close 11:20:45 Received message from Master: op=PointingHead serial=272849 11:20:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:20:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:20:45 Point started: ret=0 11:20:45 point_skyscan result=0 11:20:46 Check angles 11:20:46 SkyScan query 11:20:46 SkyScan query done: ret=0 az=89.475<-5965 ze=156.825<-1545 Statuses=0009 0009 11:20:46 Msec=0 True Az=89.475 Ze=156.825 Az status=0009 Ze status=0009 11:20:46 Check angles 11:20:46 SkyScan query 11:20:47 SkyScan query done: ret=0 az=72.06<-4804 ze=135.855<-2943 Statuses=0009 0009 11:20:47 Msec=750 True Az=72.06 Ze=135.855 Az status=0009 Ze status=0009 11:20:47 Check angles 11:20:47 SkyScan query 11:20:48 SkyScan query done: ret=0 az=54.585<-3639 ze=114.885<-4341 Statuses=0009 0009 11:20:48 Msec=1500 True Az=54.585 Ze=114.885 Az status=0009 Ze status=0009 11:20:48 Check angles 11:20:48 SkyScan query 11:20:49 SkyScan query done: ret=0 az=40.98<-2732 ze=93.915<-5739 Statuses=0009 0009 11:20:49 Msec=2250 True Az=40.98 Ze=93.915 Az status=0009 Ze status=0009 11:20:49 Check angles 11:20:49 SkyScan query 11:20:49 SkyScan query done: ret=0 az=40.995<-2733 ze=72.93<-7138 Statuses=0008 0009 11:20:49 Msec=3000 True Az=40.995 Ze=72.93 Az status=0008 Ze status=0009 11:20:49 Check angles 11:20:49 SkyScan query 11:20:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 11:20:50 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 11:20:50 Check angles 11:20:50 SkyScan query 11:20:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:20:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:20:51 Message to Master queued w/err=0: serial=272849 error=0 11:20:56 Received message from Master: op=Filter serial=272850 11:20:56 Color wheel filter change from 0 to 0 11:20:56 FLIGetFilterPos err=0 currentPosition=0 11:20:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:56 Filter is already there-color wheel unchanged 11:20:56 Received message from Master: op=Shutter serial=272851 11:20:56 Shutter LASER close 11:20:56 Received message from Camera: op=State serial=272853 11:20:56 GetSingleValue result=40 Value=cccccccc 11:20:56 SkyScan query 11:20:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:20:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:57 Parameters OK 11:20:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:57 Set A/D data flow result=40 11:20:57 Set A/D channel type result=40 11:20:57 Set A/D encoding result=40 11:20:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:57 Set channel filter=0.000000e+000 result=40 11:20:57 Config A/D Result=40 11:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:57 Get A/D filter: -9.255963e+061 result=40 11:20:57 Get A/D value=-858993460 result=40 11:20:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:57 Parameters OK 11:20:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:57 Set A/D data flow result=40 11:20:57 Set A/D channel type result=40 11:20:57 Set A/D encoding result=40 11:20:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:57 Set channel filter=0.000000e+000 result=40 11:20:57 Config A/D Result=40 11:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:57 Get A/D filter: -9.255963e+061 result=40 11:20:57 Get A/D value=-858993460 result=40 11:20:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:57 Aux= 11:20:57 Message to Camera, serial 272853 queued 11:21:33 Received message from Master: op=PointingHead serial=272866 11:21:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:21:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:21:34 Point started: ret=0 11:21:34 point_skyscan result=0 11:21:35 Check angles 11:21:35 SkyScan query 11:21:35 SkyScan query done: ret=0 az=64.35<-4290 ze=66.555<-7563 Statuses=0009 0008 11:21:35 Msec=0 True Az=64.35 Ze=66.555 Az status=0009 Ze status=0008 11:21:35 Check angles 11:21:35 SkyScan query 11:21:36 SkyScan query done: ret=0 az=81.855<-5457 ze=66.495<-7567 Statuses=0009 0008 11:21:36 Msec=750 True Az=81.855 Ze=66.495 Az status=0009 Ze status=0008 11:21:36 Check angles 11:21:36 SkyScan query 11:21:37 SkyScan query done: ret=0 az=99.315<-6621 ze=66.495<-7567 Statuses=0009 0008 11:21:37 Msec=1500 True Az=99.315 Ze=66.495 Az status=0009 Ze status=0008 11:21:37 Check angles 11:21:37 SkyScan query 11:21:37 SkyScan query done: ret=0 az=116.865<-7791 ze=66.495<-7567 Statuses=0009 0008 11:21:37 Msec=2250 True Az=116.865 Ze=66.495 Az status=0009 Ze status=0008 11:21:38 Check angles 11:21:38 SkyScan query 11:21:38 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 11:21:38 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 11:21:38 Check angles 11:21:38 SkyScan query 11:21:39 SkyScan query done: ret=0 az=151.665<-10111 ze=66.495<-7567 Statuses=0009 0008 11:21:39 Msec=3750 True Az=151.665 Ze=66.495 Az status=0009 Ze status=0008 11:21:39 Check angles 11:21:39 SkyScan query 11:21:40 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:21:40 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:21:40 Message to Master queued w/err=0: serial=272866 error=0 11:21:45 Received message from Master: op=Filter serial=272867 11:21:45 Color wheel filter change from 0 to 0 11:21:45 FLIGetFilterPos err=0 currentPosition=0 11:21:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:45 Filter is already there-color wheel unchanged 11:21:45 Received message from Master: op=Shutter serial=272868 11:21:45 Shutter LASER close 11:21:45 Received message from Camera: op=State serial=272870 11:21:45 GetSingleValue result=40 Value=cccccccc 11:21:45 SkyScan query 11:21:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:21:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:45 Parameters OK 11:21:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:45 Set A/D data flow result=40 11:21:45 Set A/D channel type result=40 11:21:45 Set A/D encoding result=40 11:21:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:45 Set channel filter=0.000000e+000 result=40 11:21:45 Config A/D Result=40 11:21:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:45 Get A/D filter: -9.255963e+061 result=40 11:21:45 Get A/D value=-858993460 result=40 11:21:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:45 Parameters OK 11:21:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:45 Set A/D data flow result=40 11:21:45 Set A/D channel type result=40 11:21:45 Set A/D encoding result=40 11:21:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:45 Set channel filter=0.000000e+000 result=40 11:21:45 Config A/D Result=40 11:21:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:45 Get A/D filter: -9.255963e+061 result=40 11:21:45 Get A/D value=-858993460 result=40 11:21:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:45 Aux= 11:21:45 Message to Camera, serial 272870 queued 11:22:23 Received message from Master: op=PointingHead serial=272883 11:22:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:22:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:22:23 Point started: ret=0 11:22:23 point_skyscan result=0 11:22:24 Check angles 11:22:24 SkyScan query 11:22:24 SkyScan query done: ret=0 az=134.625<-8975 ze=96.69<-5554 Statuses=0009 0009 11:22:24 Msec=0 True Az=134.625 Ze=96.69 Az status=0009 Ze status=0009 11:22:24 Check angles 11:22:24 SkyScan query 11:22:25 SkyScan query done: ret=0 az=130.995<-8733 ze=117.615<-4159 Statuses=0008 0009 11:22:25 Msec=750 True Az=130.995 Ze=117.615 Az status=0008 Ze status=0009 11:22:25 Check angles 11:22:25 SkyScan query 11:22:26 SkyScan query done: ret=0 az=130.995<-8733 ze=139.005<-2733 Statuses=0008 0009 11:22:26 Msec=1500 True Az=130.995 Ze=139.005 Az status=0008 Ze status=0009 11:22:26 Check angles 11:22:26 SkyScan query 11:22:26 SkyScan query done: ret=0 az=130.995<-8733 ze=160.005<-1333 Statuses=0008 0009 11:22:26 Msec=2250 True Az=130.995 Ze=160.005 Az status=0008 Ze status=0009 11:22:27 Check angles 11:22:27 SkyScan query 11:22:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.085<-23939 Statuses=0008 0009 11:22:27 Msec=3000 True Az=130.995 Ze=-179.085 Az status=0008 Ze status=0009 11:22:27 Check angles 11:22:27 SkyScan query 11:22:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.115<-22541 Statuses=0008 0009 11:22:28 Msec=3750 True Az=130.995 Ze=-158.115 Az status=0008 Ze status=0009 11:22:28 Check angles 11:22:28 SkyScan query 11:22:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 11:22:29 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 11:22:29 Check angles 11:22:29 SkyScan query 11:22:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 11:22:29 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 11:22:29 Message to Master queued w/err=0: serial=272883 error=0 11:22:34 Received message from Master: op=Filter serial=272884 11:22:34 Color wheel filter change from 0 to 0 11:22:34 FLIGetFilterPos err=0 currentPosition=0 11:22:34 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:34 Filter is already there-color wheel unchanged 11:22:35 Received message from Master: op=Shutter serial=272885 11:22:35 Shutter LASER close 11:22:35 Received message from Camera: op=State serial=272887 11:22:35 GetSingleValue result=40 Value=cccccccc 11:22:35 SkyScan query 11:22:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:22:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:35 Parameters OK 11:22:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:35 Set A/D data flow result=40 11:22:35 Set A/D channel type result=40 11:22:35 Set A/D encoding result=40 11:22:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:35 Set channel filter=0.000000e+000 result=40 11:22:35 Config A/D Result=40 11:22:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:35 Get A/D filter: -9.255963e+061 result=40 11:22:35 Get A/D value=-858993460 result=40 11:22:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:35 Parameters OK 11:22:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:35 Set A/D data flow result=40 11:22:35 Set A/D channel type result=40 11:22:35 Set A/D encoding result=40 11:22:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:35 Set channel filter=0.000000e+000 result=40 11:22:35 Config A/D Result=40 11:22:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:35 Get A/D filter: -9.255963e+061 result=40 11:22:35 Get A/D value=-858993460 result=40 11:22:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:35 Aux= 11:22:35 Message to Camera, serial 272887 queued 11:23:12 Received message from Master: op=PointingHead serial=272900 11:23:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:23:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:23:12 Point started: ret=0 11:23:12 point_skyscan result=0 11:23:13 Check angles 11:23:13 SkyScan query 11:23:14 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 11:23:14 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 11:23:14 Check angles 11:23:14 SkyScan query 11:23:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:23:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:23:15 Message to Master queued w/err=0: serial=272900 error=0 11:23:20 Received message from Master: op=Filter serial=272901 11:23:20 Color wheel filter change from 0 to 0 11:23:20 FLIGetFilterPos err=0 currentPosition=0 11:23:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:20 Filter is already there-color wheel unchanged 11:23:20 Received message from Master: op=Shutter serial=272902 11:23:20 Shutter LASER open 11:23:20 Received message from Camera: op=State serial=272904 11:23:20 GetSingleValue result=40 Value=cccccccc 11:23:20 SkyScan query 11:23:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:23:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:20 Parameters OK 11:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:20 Set A/D data flow result=40 11:23:20 Set A/D channel type result=40 11:23:20 Set A/D encoding result=40 11:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:20 Set channel filter=0.000000e+000 result=40 11:23:20 Config A/D Result=40 11:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:20 Get A/D filter: -9.255963e+061 result=40 11:23:20 Get A/D value=-858993460 result=40 11:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:20 Parameters OK 11:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:20 Set A/D data flow result=40 11:23:20 Set A/D channel type result=40 11:23:20 Set A/D encoding result=40 11:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:20 Set channel filter=0.000000e+000 result=40 11:23:20 Config A/D Result=40 11:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:20 Get A/D filter: -9.255963e+061 result=40 11:23:20 Get A/D value=-858993460 result=40 11:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:20 Aux= 11:23:20 Message to Camera, serial 272904 queued 11:23:29 Received message from Master: op=Shutter serial=272914 11:23:29 Shutter LASER close 11:23:29 Received message from Master: op=PointingHead serial=272918 11:23:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:23:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:23:30 Point started: ret=0 11:23:30 point_skyscan result=0 11:23:31 Check angles 11:23:31 SkyScan query 11:23:31 SkyScan query done: ret=0 az=136.215<-9081 ze=-143.04<-21536 Statuses=0009 0009 11:23:31 Msec=0 True Az=136.215 Ze=-143.04 Az status=0009 Ze status=0009 11:23:31 Check angles 11:23:31 SkyScan query 11:23:32 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.085<-20139 Statuses=0009 0009 11:23:32 Msec=750 True Az=153.63 Ze=-122.085 Az status=0009 Ze status=0009 11:23:32 Check angles 11:23:32 SkyScan query 11:23:33 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.16<-18744 Statuses=0009 0009 11:23:33 Msec=1500 True Az=171.18 Ze=-101.16 Az status=0009 Ze status=0009 11:23:33 Check angles 11:23:33 SkyScan query 11:23:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.22<-17348 Statuses=0008 0009 11:23:33 Msec=2250 True Az=176.01 Ze=-80.22 Az status=0008 Ze status=0009 11:23:34 Check angles 11:23:34 SkyScan query 11:23:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.22<-15948 Statuses=0008 0009 11:23:34 Msec=3000 True Az=175.995 Ze=-59.22 Az status=0008 Ze status=0009 11:23:34 Check angles 11:23:34 SkyScan query 11:23:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:23:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:23:35 Message to Master queued w/err=0: serial=272918 error=0 11:23:40 Received message from Master: op=Filter serial=272919 11:23:40 Color wheel filter change from 0 to 0 11:23:40 FLIGetFilterPos err=0 currentPosition=0 11:23:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:40 Filter is already there-color wheel unchanged 11:23:40 Received message from Master: op=Shutter serial=272920 11:23:40 Shutter LASER close 11:23:40 Received message from Camera: op=State serial=272922 11:23:40 GetSingleValue result=40 Value=cccccccc 11:23:40 SkyScan query 11:23:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:23:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:41 Parameters OK 11:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:41 Set A/D data flow result=40 11:23:41 Set A/D channel type result=40 11:23:41 Set A/D encoding result=40 11:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:41 Set channel filter=0.000000e+000 result=40 11:23:41 Config A/D Result=40 11:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:41 Get A/D filter: -9.255963e+061 result=40 11:23:41 Get A/D value=-858993460 result=40 11:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:41 Parameters OK 11:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:41 Set A/D data flow result=40 11:23:41 Set A/D channel type result=40 11:23:41 Set A/D encoding result=40 11:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:41 Set channel filter=0.000000e+000 result=40 11:23:41 Config A/D Result=40 11:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:41 Get A/D filter: -9.255963e+061 result=40 11:23:41 Get A/D value=-858993460 result=40 11:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:41 Aux= 11:23:41 Message to Camera, serial 272922 queued 11:24:18 Received message from Master: op=PointingHead serial=272935 11:24:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:24:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:24:18 Point started: ret=0 11:24:18 point_skyscan result=0 11:24:19 Check angles 11:24:19 SkyScan query 11:24:19 SkyScan query done: ret=0 az=152.88<-10192 ze=-21.45<-13430 Statuses=0009 0009 11:24:19 Msec=0 True Az=152.88 Ze=-21.45 Az status=0009 Ze status=0009 11:24:19 Check angles 11:24:19 SkyScan query 11:24:20 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.87<-12058 Statuses=0009 0009 11:24:20 Msec=750 True Az=135.57 Ze=-0.87 Az status=0009 Ze status=0009 11:24:20 Check angles 11:24:20 SkyScan query 11:24:21 SkyScan query done: ret=0 az=117.63<-7842 ze=20.475<-10635 Statuses=0009 0009 11:24:21 Msec=1500 True Az=117.63 Ze=20.475 Az status=0009 Ze status=0009 11:24:21 Check angles 11:24:21 SkyScan query 11:24:22 SkyScan query done: ret=0 az=100.29<-6686 ze=41.445<-9237 Statuses=0009 0009 11:24:22 Msec=2250 True Az=100.29 Ze=41.445 Az status=0009 Ze status=0009 11:24:22 Check angles 11:24:22 SkyScan query 11:24:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 11:24:22 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 11:24:22 Check angles 11:24:22 SkyScan query 11:24:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:24:23 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 11:24:23 Message to Master queued w/err=0: serial=272935 error=0 11:24:28 Received message from Master: op=Filter serial=272936 11:24:28 Color wheel filter change from 0 to 0 11:24:28 FLIGetFilterPos err=0 currentPosition=0 11:24:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:28 Filter is already there-color wheel unchanged 11:24:28 Received message from Master: op=Shutter serial=272937 11:24:28 Shutter LASER close 11:24:28 Received message from Camera: op=State serial=272939 11:24:28 GetSingleValue result=40 Value=cccccccc 11:24:28 SkyScan query 11:24:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:24:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:29 Parameters OK 11:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:29 Set A/D data flow result=40 11:24:29 Set A/D channel type result=40 11:24:29 Set A/D encoding result=40 11:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:29 Set channel filter=0.000000e+000 result=40 11:24:29 Config A/D Result=40 11:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:29 Get A/D filter: -9.255963e+061 result=40 11:24:29 Get A/D value=-858993460 result=40 11:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:29 Parameters OK 11:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:29 Set A/D data flow result=40 11:24:29 Set A/D channel type result=40 11:24:29 Set A/D encoding result=40 11:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:29 Set channel filter=0.000000e+000 result=40 11:24:29 Config A/D Result=40 11:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:29 Get A/D filter: -9.255963e+061 result=40 11:24:29 Get A/D value=-858993460 result=40 11:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:29 Aux= 11:24:29 Message to Camera, serial 272939 queued 11:25:06 Received message from Master: op=PointingHead serial=272952 11:25:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:25:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:25:06 Point started: ret=0 11:25:06 point_skyscan result=0 11:25:07 Check angles 11:25:07 SkyScan query 11:25:07 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 11:25:07 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 11:25:08 Check angles 11:25:08 SkyScan query 11:25:08 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 11:25:08 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 11:25:08 Check angles 11:25:08 SkyScan query 11:25:09 SkyScan query done: ret=0 az=144<-9600 ze=38.505<-9433 Statuses=0009 0008 11:25:09 Msec=1500 True Az=144 Ze=38.505 Az status=0009 Ze status=0008 11:25:09 Check angles 11:25:09 SkyScan query 11:25:10 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 11:25:10 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 11:25:10 Check angles 11:25:10 SkyScan query 11:25:10 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:25:10 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:25:11 Check angles 11:25:11 SkyScan query 11:25:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:25:11 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:25:11 Message to Master queued w/err=0: serial=272952 error=0 11:25:16 Received message from Master: op=Filter serial=272953 11:25:16 Color wheel filter change from 0 to 0 11:25:16 FLIGetFilterPos err=0 currentPosition=0 11:25:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:16 Filter is already there-color wheel unchanged 11:25:16 Received message from Master: op=Shutter serial=272954 11:25:16 Shutter LASER close 11:25:16 Received message from Camera: op=State serial=272956 11:25:16 GetSingleValue result=40 Value=cccccccc 11:25:16 SkyScan query 11:25:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:25:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:17 Parameters OK 11:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:17 Set A/D data flow result=40 11:25:17 Set A/D channel type result=40 11:25:17 Set A/D encoding result=40 11:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:17 Set channel filter=0.000000e+000 result=40 11:25:17 Config A/D Result=40 11:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:17 Get A/D filter: -9.255963e+061 result=40 11:25:17 Get A/D value=-858993460 result=40 11:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:17 Parameters OK 11:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:17 Set A/D data flow result=40 11:25:17 Set A/D channel type result=40 11:25:17 Set A/D encoding result=40 11:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:17 Set channel filter=0.000000e+000 result=40 11:25:17 Config A/D Result=40 11:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:17 Get A/D filter: -9.255963e+061 result=40 11:25:17 Get A/D value=-858993460 result=40 11:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:17 Aux= [UTC 2018-12-19 11:25:17] 11:25:17 Message to Camera, serial 272956 queued 11:25:54 Received message from Master: op=PointingHead serial=272969 11:25:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:25:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:25:54 Point started: ret=0 11:25:54 point_skyscan result=0 11:25:55 Check angles 11:25:55 SkyScan query 11:25:56 SkyScan query done: ret=0 az=152.955<-10197 ze=68.325<-7445 Statuses=0009 0009 11:25:56 Msec=0 True Az=152.955 Ze=68.325 Az status=0009 Ze status=0009 11:25:56 Check angles 11:25:56 SkyScan query 11:25:56 SkyScan query done: ret=0 az=135.15<-9010 ze=89.73<-6018 Statuses=0009 0009 11:25:56 Msec=750 True Az=135.15 Ze=89.73 Az status=0009 Ze status=0009 11:25:57 Check angles 11:25:57 SkyScan query 11:25:57 SkyScan query done: ret=0 az=117.36<-7824 ze=111.075<-4595 Statuses=0009 0009 11:25:57 Msec=1500 True Az=117.36 Ze=111.075 Az status=0009 Ze status=0009 11:25:57 Check angles 11:25:57 SkyScan query 11:25:58 SkyScan query done: ret=0 az=112.98<-7532 ze=132.045<-3197 Statuses=0008 0009 11:25:58 Msec=2250 True Az=112.98 Ze=132.045 Az status=0008 Ze status=0009 11:25:58 Check angles 11:25:58 SkyScan query 11:25:59 SkyScan query done: ret=0 az=112.995<-7533 ze=153.03<-1798 Statuses=0008 0009 11:25:59 Msec=3000 True Az=112.995 Ze=153.03 Az status=0008 Ze status=0009 11:25:59 Check angles 11:25:59 SkyScan query 11:25:59 SkyScan query done: ret=0 az=112.995<-7533 ze=173.955<-403 Statuses=0008 0009 11:25:59 Msec=3750 True Az=112.995 Ze=173.955 Az status=0008 Ze status=0009 11:26:00 Check angles 11:26:00 SkyScan query 11:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 11:26:00 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 11:26:00 Message to Master queued w/err=0: serial=272969 error=0 11:26:05 Received message from Master: op=Filter serial=272970 11:26:05 Color wheel filter change from 0 to 0 11:26:05 FLIGetFilterPos err=0 currentPosition=0 11:26:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:05 Filter is already there-color wheel unchanged 11:26:05 Received message from Master: op=Shutter serial=272971 11:26:05 Shutter LASER open 11:26:05 Received message from Camera: op=State serial=272973 11:26:05 GetSingleValue result=40 Value=cccccccc 11:26:05 SkyScan query 11:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:26:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:06 Parameters OK 11:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:06 Set A/D data flow result=40 11:26:06 Set A/D channel type result=40 11:26:06 Set A/D encoding result=40 11:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:06 Set channel filter=0.000000e+000 result=40 11:26:06 Config A/D Result=40 11:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:06 Get A/D filter: -9.255963e+061 result=40 11:26:06 Get A/D value=-858993460 result=40 11:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:06 Parameters OK 11:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:06 Set A/D data flow result=40 11:26:06 Set A/D channel type result=40 11:26:06 Set A/D encoding result=40 11:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:06 Set channel filter=0.000000e+000 result=40 11:26:06 Config A/D Result=40 11:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:06 Get A/D filter: -9.255963e+061 result=40 11:26:06 Get A/D value=-858993460 result=40 11:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:06 Aux= 11:26:06 Message to Camera, serial 272973 queued 11:26:14 Received message from Master: op=Shutter serial=272983 11:26:14 Shutter LASER close 11:26:15 Received message from Master: op=PointingHead serial=272987 11:26:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:26:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:26:15 Point started: ret=0 11:26:15 point_skyscan result=0 11:26:16 Check angles 11:26:16 SkyScan query 11:26:17 SkyScan query done: ret=0 az=90.255<-6017 ze=157.485<-1501 Statuses=0009 0009 11:26:17 Msec=0 True Az=90.255 Ze=157.485 Az status=0009 Ze status=0009 11:26:17 Check angles 11:26:17 SkyScan query 11:26:17 SkyScan query done: ret=0 az=72.3<-4820 ze=136.125<-2925 Statuses=0009 0009 11:26:17 Msec=750 True Az=72.3 Ze=136.125 Az status=0009 Ze status=0009 11:26:18 Check angles 11:26:18 SkyScan query 11:26:18 SkyScan query done: ret=0 az=54.81<-3654 ze=115.215<-4319 Statuses=0009 0009 11:26:18 Msec=1500 True Az=54.81 Ze=115.215 Az status=0009 Ze status=0009 11:26:18 Check angles 11:26:18 SkyScan query 11:26:19 SkyScan query done: ret=0 az=40.98<-2732 ze=94.185<-5721 Statuses=0009 0009 11:26:19 Msec=2250 True Az=40.98 Ze=94.185 Az status=0009 Ze status=0009 11:26:19 Check angles 11:26:19 SkyScan query 11:26:20 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 11:26:20 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 11:26:20 Check angles 11:26:20 SkyScan query 11:26:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 11:26:20 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 11:26:21 Check angles 11:26:21 SkyScan query 11:26:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:26:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:26:21 Message to Master queued w/err=0: serial=272987 error=0 11:26:26 Received message from Master: op=Filter serial=272988 11:26:26 Color wheel filter change from 0 to 0 11:26:26 FLIGetFilterPos err=0 currentPosition=0 11:26:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:26 Filter is already there-color wheel unchanged 11:26:26 Received message from Master: op=Shutter serial=272989 11:26:26 Shutter LASER close 11:26:27 Received message from Camera: op=State serial=272991 11:26:27 GetSingleValue result=40 Value=cccccccc 11:26:27 SkyScan query 11:26:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:26:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:27 Parameters OK 11:26:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:27 Set A/D data flow result=40 11:26:27 Set A/D channel type result=40 11:26:27 Set A/D encoding result=40 11:26:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:27 Set channel filter=0.000000e+000 result=40 11:26:27 Config A/D Result=40 11:26:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:27 Get A/D filter: -9.255963e+061 result=40 11:26:27 Get A/D value=-858993460 result=40 11:26:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:27 Parameters OK 11:26:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:27 Set A/D data flow result=40 11:26:27 Set A/D channel type result=40 11:26:27 Set A/D encoding result=40 11:26:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:27 Set channel filter=0.000000e+000 result=40 11:26:27 Config A/D Result=40 11:26:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:27 Get A/D filter: -9.255963e+061 result=40 11:26:27 Get A/D value=-858993460 result=40 11:26:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:27 Aux= 11:26:27 Message to Camera, serial 272991 queued 11:27:04 Received message from Master: op=PointingHead serial=273004 11:27:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:27:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:27:04 Point started: ret=0 11:27:04 point_skyscan result=0 11:27:05 Check angles 11:27:05 SkyScan query 11:27:06 SkyScan query done: ret=0 az=63.975<-4265 ze=66.54<-7564 Statuses=0009 0008 11:27:06 Msec=0 True Az=63.975 Ze=66.54 Az status=0009 Ze status=0008 11:27:06 Check angles 11:27:06 SkyScan query 11:27:06 SkyScan query done: ret=0 az=81.435<-5429 ze=66.51<-7566 Statuses=0009 0008 11:27:06 Msec=750 True Az=81.435 Ze=66.51 Az status=0009 Ze status=0008 11:27:07 Check angles 11:27:07 SkyScan query 11:27:07 SkyScan query done: ret=0 az=99.36<-6624 ze=66.495<-7567 Statuses=0009 0008 11:27:07 Msec=1500 True Az=99.36 Ze=66.495 Az status=0009 Ze status=0008 11:27:07 Check angles 11:27:07 SkyScan query 11:27:08 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 11:27:08 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 11:27:08 Check angles 11:27:08 SkyScan query 11:27:09 SkyScan query done: ret=0 az=134.685<-8979 ze=66.495<-7567 Statuses=0009 0008 11:27:09 Msec=3000 True Az=134.685 Ze=66.495 Az status=0009 Ze status=0008 11:27:09 Check angles 11:27:09 SkyScan query 11:27:09 SkyScan query done: ret=0 az=152.04<-10136 ze=66.495<-7567 Statuses=0009 0008 11:27:09 Msec=3750 True Az=152.04 Ze=66.495 Az status=0009 Ze status=0008 11:27:10 Check angles 11:27:10 SkyScan query 11:27:10 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:27:10 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:27:10 Message to Master queued w/err=0: serial=273004 error=0 11:27:15 Received message from Master: op=Filter serial=273005 11:27:15 Color wheel filter change from 0 to 0 11:27:15 FLIGetFilterPos err=0 currentPosition=0 11:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:15 Filter is already there-color wheel unchanged 11:27:15 Received message from Master: op=Shutter serial=273006 11:27:15 Shutter LASER close 11:27:15 Received message from Camera: op=State serial=273008 11:27:15 GetSingleValue result=40 Value=cccccccc 11:27:15 SkyScan query 11:27:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:27:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:16 Parameters OK 11:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:16 Set A/D data flow result=40 11:27:16 Set A/D channel type result=40 11:27:16 Set A/D encoding result=40 11:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:16 Set channel filter=0.000000e+000 result=40 11:27:16 Config A/D Result=40 11:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:16 Get A/D filter: -9.255963e+061 result=40 11:27:16 Get A/D value=-858993460 result=40 11:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:16 Parameters OK 11:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:16 Set A/D data flow result=40 11:27:16 Set A/D channel type result=40 11:27:16 Set A/D encoding result=40 11:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:16 Set channel filter=0.000000e+000 result=40 11:27:16 Config A/D Result=40 11:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:16 Get A/D filter: -9.255963e+061 result=40 11:27:16 Get A/D value=-858993460 result=40 11:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:16 Aux= 11:27:16 Message to Camera, serial 273008 queued 11:27:53 Received message from Master: op=PointingHead serial=273021 11:27:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:27:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:27:53 Point started: ret=0 11:27:53 point_skyscan result=0 11:27:54 Check angles 11:27:54 SkyScan query 11:27:55 SkyScan query done: ret=0 az=134.61<-8974 ze=96.765<-5549 Statuses=0009 0009 11:27:55 Msec=0 True Az=134.61 Ze=96.765 Az status=0009 Ze status=0009 11:27:55 Check angles 11:27:55 SkyScan query 11:27:55 SkyScan query done: ret=0 az=130.995<-8733 ze=117.69<-4154 Statuses=0008 0009 11:27:55 Msec=750 True Az=130.995 Ze=117.69 Az status=0008 Ze status=0009 11:27:56 Check angles 11:27:56 SkyScan query 11:27:56 SkyScan query done: ret=0 az=130.995<-8733 ze=138.66<-2756 Statuses=0008 0009 11:27:56 Msec=1500 True Az=130.995 Ze=138.66 Az status=0008 Ze status=0009 11:27:56 Check angles 11:27:56 SkyScan query 11:27:57 SkyScan query done: ret=0 az=130.995<-8733 ze=159.615<-1359 Statuses=0008 0009 11:27:57 Msec=2250 True Az=130.995 Ze=159.615 Az status=0008 Ze status=0009 11:27:57 Check angles 11:27:57 SkyScan query 11:27:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.43<-23962 Statuses=0008 0009 11:27:58 Msec=3000 True Az=130.995 Ze=-179.43 Az status=0008 Ze status=0009 11:27:58 Check angles 11:27:58 SkyScan query 11:27:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.46<-22564 Statuses=0008 0009 11:27:58 Msec=3750 True Az=130.995 Ze=-158.46 Az status=0008 Ze status=0009 11:27:59 Check angles 11:27:59 SkyScan query 11:27:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 11:27:59 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 11:27:59 Check angles 11:27:59 SkyScan query 11:28:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 11:28:00 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 11:28:00 Message to Master queued w/err=0: serial=273021 error=0 11:28:05 Received message from Master: op=Filter serial=273022 11:28:05 Color wheel filter change from 0 to 0 11:28:05 FLIGetFilterPos err=0 currentPosition=0 11:28:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:05 Filter is already there-color wheel unchanged 11:28:05 Received message from Master: op=Shutter serial=273023 11:28:05 Shutter LASER close 11:28:05 Received message from Camera: op=State serial=273025 11:28:05 GetSingleValue result=40 Value=cccccccc 11:28:05 SkyScan query 11:28:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:28:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:06 Parameters OK 11:28:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:06 Set A/D data flow result=40 11:28:06 Set A/D channel type result=40 11:28:06 Set A/D encoding result=40 11:28:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:06 Set channel filter=0.000000e+000 result=40 11:28:06 Config A/D Result=40 11:28:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:06 Get A/D filter: -9.255963e+061 result=40 11:28:06 Get A/D value=-858993460 result=40 11:28:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:06 Parameters OK 11:28:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:06 Set A/D data flow result=40 11:28:06 Set A/D channel type result=40 11:28:06 Set A/D encoding result=40 11:28:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:06 Set channel filter=0.000000e+000 result=40 11:28:06 Config A/D Result=40 11:28:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:06 Get A/D filter: -9.255963e+061 result=40 11:28:06 Get A/D value=-858993460 result=40 11:28:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:06 Aux= 11:28:06 Message to Camera, serial 273025 queued 11:28:42 Received message from Master: op=PointingHead serial=273038 11:28:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:28:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:28:43 Point started: ret=0 11:28:43 point_skyscan result=0 11:28:44 Check angles 11:28:44 SkyScan query 11:28:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 11:28:44 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 11:28:44 Check angles 11:28:44 SkyScan query 11:28:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:28:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:28:45 Message to Master queued w/err=0: serial=273038 error=0 11:28:50 Received message from Master: op=Filter serial=273039 11:28:50 Color wheel filter change from 0 to 0 11:28:50 FLIGetFilterPos err=0 currentPosition=0 11:28:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:50 Filter is already there-color wheel unchanged 11:28:50 Received message from Master: op=Shutter serial=273040 11:28:50 Shutter LASER open 11:28:50 Received message from Camera: op=State serial=273042 11:28:50 GetSingleValue result=40 Value=cccccccc 11:28:50 SkyScan query 11:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:28:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:51 Parameters OK 11:28:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:51 Set A/D data flow result=40 11:28:51 Set A/D channel type result=40 11:28:51 Set A/D encoding result=40 11:28:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:51 Set channel filter=0.000000e+000 result=40 11:28:51 Config A/D Result=40 11:28:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:51 Get A/D filter: -9.255963e+061 result=40 11:28:51 Get A/D value=-858993460 result=40 11:28:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:51 Parameters OK 11:28:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:51 Set A/D data flow result=40 11:28:51 Set A/D channel type result=40 11:28:51 Set A/D encoding result=40 11:28:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:51 Set channel filter=0.000000e+000 result=40 11:28:51 Config A/D Result=40 11:28:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:51 Get A/D filter: -9.255963e+061 result=40 11:28:51 Get A/D value=-858993460 result=40 11:28:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:51 Aux= 11:28:51 Message to Camera, serial 273042 queued 11:28:59 Received message from Master: op=Shutter serial=273052 11:28:59 Shutter LASER close 11:29:00 Received message from Master: op=PointingHead serial=273056 11:29:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:29:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:29:00 Point started: ret=0 11:29:00 point_skyscan result=0 11:29:01 Check angles 11:29:01 SkyScan query 11:29:02 SkyScan query done: ret=0 az=136.335<-9089 ze=-142.8<-21520 Statuses=0009 0009 11:29:02 Msec=0 True Az=136.335 Ze=-142.8 Az status=0009 Ze status=0009 11:29:02 Check angles 11:29:02 SkyScan query 11:29:02 SkyScan query done: ret=0 az=154.17<-10278 ze=-121.395<-20093 Statuses=0009 0009 11:29:02 Msec=750 True Az=154.17 Ze=-121.395 Az status=0009 Ze status=0009 11:29:03 Check angles 11:29:03 SkyScan query 11:29:03 SkyScan query done: ret=0 az=171.63<-11442 ze=-100.35<-18690 Statuses=0009 0009 11:29:03 Msec=1500 True Az=171.63 Ze=-100.35 Az status=0009 Ze status=0009 11:29:03 Check angles 11:29:03 SkyScan query 11:29:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 11:29:04 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 11:29:04 Check angles 11:29:04 SkyScan query 11:29:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 11:29:05 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 11:29:05 Check angles 11:29:05 SkyScan query 11:29:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:29:05 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:29:05 Message to Master queued w/err=0: serial=273056 error=0 11:29:10 Received message from Master: op=Filter serial=273057 11:29:10 Color wheel filter change from 0 to 0 11:29:10 FLIGetFilterPos err=0 currentPosition=0 11:29:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:10 Filter is already there-color wheel unchanged 11:29:11 Received message from Master: op=Shutter serial=273058 11:29:11 Shutter LASER close 11:29:11 Received message from Camera: op=State serial=273060 11:29:11 GetSingleValue result=40 Value=cccccccc 11:29:11 SkyScan query 11:29:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:29:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:11 Parameters OK 11:29:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:11 Set A/D data flow result=40 11:29:11 Set A/D channel type result=40 11:29:11 Set A/D encoding result=40 11:29:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:11 Set channel filter=0.000000e+000 result=40 11:29:11 Config A/D Result=40 11:29:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:11 Get A/D filter: -9.255963e+061 result=40 11:29:11 Get A/D value=-858993460 result=40 11:29:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:11 Parameters OK 11:29:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:11 Set A/D data flow result=40 11:29:11 Set A/D channel type result=40 11:29:11 Set A/D encoding result=40 11:29:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:11 Set channel filter=0.000000e+000 result=40 11:29:11 Config A/D Result=40 11:29:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:11 Get A/D filter: -9.255963e+061 result=40 11:29:11 Get A/D value=-858993460 result=40 11:29:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:11 Aux= 11:29:11 Message to Camera, serial 273060 queued 11:29:48 Received message from Master: op=PointingHead serial=273073 11:29:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:29:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:29:48 Point started: ret=0 11:29:48 point_skyscan result=0 11:29:49 Check angles 11:29:49 SkyScan query 11:29:50 SkyScan query done: ret=0 az=152.82<-10188 ze=-21.465<-13431 Statuses=0009 0009 11:29:50 Msec=0 True Az=152.82 Ze=-21.465 Az status=0009 Ze status=0009 11:29:50 Check angles 11:29:50 SkyScan query 11:29:51 SkyScan query done: ret=0 az=134.865<-8991 ze=-0.06<-12004 Statuses=0009 0009 11:29:51 Msec=750 True Az=134.865 Ze=-0.06 Az status=0009 Ze status=0009 11:29:51 Check angles 11:29:51 SkyScan query 11:29:51 SkyScan query done: ret=0 az=117.465<-7831 ze=20.94<-10604 Statuses=0009 0009 11:29:51 Msec=1500 True Az=117.465 Ze=20.94 Az status=0009 Ze status=0009 11:29:51 Check angles 11:29:51 SkyScan query 11:29:52 SkyScan query done: ret=0 az=99.66<-6644 ze=42.24<-9184 Statuses=0009 0009 11:29:52 Msec=2250 True Az=99.66 Ze=42.24 Az status=0009 Ze status=0009 11:29:52 Check angles 11:29:52 SkyScan query 11:29:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 11:29:53 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 11:29:53 Check angles 11:29:53 SkyScan query 11:29:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:29:54 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 11:29:54 Message to Master queued w/err=0: serial=273073 error=0 11:29:59 Received message from Master: op=Filter serial=273074 11:29:59 Color wheel filter change from 0 to 0 11:29:59 FLIGetFilterPos err=0 currentPosition=0 11:29:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:59 Filter is already there-color wheel unchanged 11:29:59 Received message from Master: op=Shutter serial=273075 11:29:59 Shutter LASER close 11:29:59 Received message from Camera: op=State serial=273077 11:29:59 GetSingleValue result=40 Value=cccccccc 11:29:59 SkyScan query 11:29:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:29:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:59 Parameters OK 11:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:59 Set A/D data flow result=40 11:29:59 Set A/D channel type result=40 11:29:59 Set A/D encoding result=40 11:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:59 Set channel filter=0.000000e+000 result=40 11:29:59 Config A/D Result=40 11:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:59 Get A/D filter: -9.255963e+061 result=40 11:29:59 Get A/D value=-858993460 result=40 11:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:59 Parameters OK 11:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:59 Set A/D data flow result=40 11:29:59 Set A/D channel type result=40 11:29:59 Set A/D encoding result=40 11:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:59 Set channel filter=0.000000e+000 result=40 11:29:59 Config A/D Result=40 11:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:59 Get A/D filter: -9.255963e+061 result=40 11:29:59 Get A/D value=-858993460 result=40 11:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:59 Aux= 11:29:59 Message to Camera, serial 273077 queued 11:30:36 Received message from Master: op=PointingHead serial=273090 11:30:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:30:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:30:37 Point started: ret=0 11:30:37 point_skyscan result=0 11:30:37 Check angles 11:30:37 SkyScan query 11:30:38 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 11:30:38 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 11:30:38 Check angles 11:30:38 SkyScan query 11:30:39 SkyScan query done: ret=0 az=127.185<-8479 ze=38.505<-9433 Statuses=0009 0008 11:30:39 Msec=750 True Az=127.185 Ze=38.505 Az status=0009 Ze status=0008 11:30:39 Check angles 11:30:39 SkyScan query 11:30:39 SkyScan query done: ret=0 az=144.6<-9640 ze=38.505<-9433 Statuses=0009 0008 11:30:39 Msec=1500 True Az=144.6 Ze=38.505 Az status=0009 Ze status=0008 11:30:40 Check angles 11:30:40 SkyScan query 11:30:40 SkyScan query done: ret=0 az=162.15<-10810 ze=38.505<-9433 Statuses=0009 0008 11:30:40 Msec=2250 True Az=162.15 Ze=38.505 Az status=0009 Ze status=0008 11:30:40 Check angles 11:30:40 SkyScan query 11:30:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:30:41 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:30:41 Check angles 11:30:41 SkyScan query 11:30:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:30:42 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:30:42 Message to Master queued w/err=0: serial=273090 error=0 11:30:47 Received message from Master: op=Filter serial=273091 11:30:47 Color wheel filter change from 0 to 0 11:30:47 FLIGetFilterPos err=0 currentPosition=0 11:30:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:47 Filter is already there-color wheel unchanged 11:30:47 Received message from Master: op=Shutter serial=273092 11:30:47 Shutter LASER close 11:30:47 Received message from Camera: op=State serial=273094 11:30:47 GetSingleValue result=40 Value=cccccccc 11:30:47 SkyScan query 11:30:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:30:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:48 Parameters OK 11:30:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:48 Set A/D data flow result=40 11:30:48 Set A/D channel type result=40 11:30:48 Set A/D encoding result=40 11:30:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:48 Set channel filter=0.000000e+000 result=40 11:30:48 Config A/D Result=40 11:30:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:48 Get A/D filter: -9.255963e+061 result=40 11:30:48 Get A/D value=-858993460 result=40 11:30:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:48 Parameters OK 11:30:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:48 Set A/D data flow result=40 11:30:48 Set A/D channel type result=40 11:30:48 Set A/D encoding result=40 11:30:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:48 Set channel filter=0.000000e+000 result=40 11:30:48 Config A/D Result=40 11:30:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:48 Get A/D filter: -9.255963e+061 result=40 11:30:48 Get A/D value=-858993460 result=40 11:30:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:48 Aux= 11:30:48 Message to Camera, serial 273094 queued 11:31:24 Received message from Master: op=PointingHead serial=273106 11:31:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:31:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:31:24 Point started: ret=0 11:31:24 point_skyscan result=0 11:31:25 Check angles 11:31:25 SkyScan query 11:31:25 SkyScan query done: ret=0 az=152.895<-10193 ze=68.37<-7442 Statuses=0009 0009 11:31:25 Msec=0 True Az=152.895 Ze=68.37 Az status=0009 Ze status=0009 11:31:25 Check angles 11:31:25 SkyScan query 11:31:26 SkyScan query done: ret=0 az=135.36<-9024 ze=89.37<-6042 Statuses=0009 0009 11:31:26 Msec=750 True Az=135.36 Ze=89.37 Az status=0009 Ze status=0009 11:31:26 Check angles 11:31:26 SkyScan query 11:31:27 SkyScan query done: ret=0 az=117.825<-7855 ze=110.28<-4648 Statuses=0009 0009 11:31:27 Msec=1500 True Az=117.825 Ze=110.28 Az status=0009 Ze status=0009 11:31:27 Check angles 11:31:27 SkyScan query 11:31:27 SkyScan query done: ret=0 az=112.995<-7533 ze=131.265<-3249 Statuses=0008 0009 11:31:27 Msec=2250 True Az=112.995 Ze=131.265 Az status=0008 Ze status=0009 11:31:28 Check angles 11:31:28 SkyScan query 11:31:28 SkyScan query done: ret=0 az=112.995<-7533 ze=152.145<-1857 Statuses=0008 0009 11:31:28 Msec=3000 True Az=112.995 Ze=152.145 Az status=0008 Ze status=0009 11:31:28 Check angles 11:31:28 SkyScan query 11:31:29 SkyScan query done: ret=0 az=112.995<-7533 ze=173.13<-458 Statuses=0008 0009 11:31:29 Msec=3750 True Az=112.995 Ze=173.13 Az status=0008 Ze status=0009 11:31:29 Check angles 11:31:29 SkyScan query 11:31:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.92<-23528 Statuses=0008 0009 11:31:30 Msec=4500 True Az=112.995 Ze=-172.92 Az status=0008 Ze status=0009 11:31:30 Check angles 11:31:30 SkyScan query 11:31:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.95<-23530 Statuses=0008 0008 11:31:30 Msec=5250 True Az=112.995 Ze=-172.95 Az status=0008 Ze status=0008 11:31:30 Message to Master queued w/err=0: serial=273106 error=0 11:31:35 Received message from Master: op=Filter serial=273107 11:31:35 Color wheel filter change from 0 to 0 11:31:35 FLIGetFilterPos err=0 currentPosition=0 11:31:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:35 Filter is already there-color wheel unchanged 11:31:36 Received message from Master: op=Shutter serial=273108 11:31:36 Shutter LASER open 11:31:36 Received message from Camera: op=State serial=273110 11:31:36 GetSingleValue result=40 Value=cccccccc 11:31:36 SkyScan query 11:31:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:31:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:36 Parameters OK 11:31:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:36 Set A/D data flow result=40 11:31:36 Set A/D channel type result=40 11:31:36 Set A/D encoding result=40 11:31:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:36 Set channel filter=0.000000e+000 result=40 11:31:36 Config A/D Result=40 11:31:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:36 Get A/D filter: -9.255963e+061 result=40 11:31:36 Get A/D value=-858993460 result=40 11:31:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:36 Parameters OK 11:31:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:36 Set A/D data flow result=40 11:31:36 Set A/D channel type result=40 11:31:36 Set A/D encoding result=40 11:31:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:36 Set channel filter=0.000000e+000 result=40 11:31:36 Config A/D Result=40 11:31:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:36 Get A/D filter: -9.255963e+061 result=40 11:31:36 Get A/D value=-858993460 result=40 11:31:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:36 Aux= 11:31:36 Message to Camera, serial 273110 queued 11:31:45 Received message from Master: op=Shutter serial=273120 11:31:45 Shutter LASER close 11:31:45 Received message from Master: op=PointingHead serial=273124 11:31:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:31:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:31:46 Point started: ret=0 11:31:46 point_skyscan result=0 11:31:46 Check angles 11:31:46 SkyScan query 11:31:47 SkyScan query done: ret=0 az=90.195<-6013 ze=157.44<-1504 Statuses=0009 0009 11:31:47 Msec=0 True Az=90.195 Ze=157.44 Az status=0009 Ze status=0009 11:31:47 Check angles 11:31:47 SkyScan query 11:31:48 SkyScan query done: ret=0 az=72.285<-4819 ze=136.05<-2930 Statuses=0009 0009 11:31:48 Msec=750 True Az=72.285 Ze=136.05 Az status=0009 Ze status=0009 11:31:48 Check angles 11:31:48 SkyScan query 11:31:48 SkyScan query done: ret=0 az=54.495<-3633 ze=114.615<-4359 Statuses=0009 0009 11:31:48 Msec=1500 True Az=54.495 Ze=114.615 Az status=0009 Ze status=0009 11:31:49 Check angles 11:31:49 SkyScan query 11:31:49 SkyScan query done: ret=0 az=40.98<-2732 ze=93.255<-5783 Statuses=0009 0009 11:31:49 Msec=2250 True Az=40.98 Ze=93.255 Az status=0009 Ze status=0009 11:31:49 Check angles 11:31:49 SkyScan query 11:31:50 SkyScan query done: ret=0 az=40.995<-2733 ze=72.285<-7181 Statuses=0008 0009 11:31:50 Msec=3000 True Az=40.995 Ze=72.285 Az status=0008 Ze status=0009 11:31:50 Check angles 11:31:50 SkyScan query 11:31:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.005<-8533 Statuses=0008 0009 11:31:51 Msec=3750 True Az=40.995 Ze=52.005 Az status=0008 Ze status=0009 11:31:51 Check angles 11:31:51 SkyScan query 11:31:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:31:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:31:52 Message to Master queued w/err=0: serial=273124 error=0 11:31:57 Received message from Master: op=Filter serial=273125 11:31:57 Color wheel filter change from 0 to 0 11:31:57 FLIGetFilterPos err=0 currentPosition=0 11:31:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:57 Filter is already there-color wheel unchanged 11:31:57 Received message from Master: op=Shutter serial=273126 11:31:57 Shutter LASER close 11:31:57 Received message from Camera: op=State serial=273128 11:31:57 GetSingleValue result=40 Value=cccccccc 11:31:57 SkyScan query 11:31:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:31:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:57 Parameters OK 11:31:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:57 Set A/D data flow result=40 11:31:57 Set A/D channel type result=40 11:31:57 Set A/D encoding result=40 11:31:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:57 Set channel filter=0.000000e+000 result=40 11:31:57 Config A/D Result=40 11:31:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:57 Get A/D filter: -9.255963e+061 result=40 11:31:57 Get A/D value=-858993460 result=40 11:31:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:57 Parameters OK 11:31:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:57 Set A/D data flow result=40 11:31:57 Set A/D channel type result=40 11:31:57 Set A/D encoding result=40 11:31:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:57 Set channel filter=0.000000e+000 result=40 11:31:57 Config A/D Result=40 11:31:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:57 Get A/D filter: -9.255963e+061 result=40 11:31:57 Get A/D value=-858993460 result=40 11:31:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:57 Aux= 11:31:57 Message to Camera, serial 273128 queued 11:32:34 Received message from Master: op=PointingHead serial=273141 11:32:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:32:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:32:35 Point started: ret=0 11:32:35 point_skyscan result=0 11:32:35 Check angles 11:32:35 SkyScan query 11:32:36 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 11:32:36 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 11:32:36 Check angles 11:32:36 SkyScan query 11:32:37 SkyScan query done: ret=0 az=81.66<-5444 ze=66.495<-7567 Statuses=0009 0008 11:32:37 Msec=750 True Az=81.66 Ze=66.495 Az status=0009 Ze status=0008 11:32:37 Check angles 11:32:37 SkyScan query 11:32:37 SkyScan query done: ret=0 az=99.63<-6642 ze=66.495<-7567 Statuses=0009 0008 11:32:37 Msec=1500 True Az=99.63 Ze=66.495 Az status=0009 Ze status=0008 11:32:38 Check angles 11:32:38 SkyScan query 11:32:38 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 11:32:38 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 11:32:38 Check angles 11:32:38 SkyScan query 11:32:39 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 11:32:39 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 11:32:39 Check angles 11:32:39 SkyScan query 11:32:40 SkyScan query done: ret=0 az=152.28<-10152 ze=66.495<-7567 Statuses=0009 0008 11:32:40 Msec=3750 True Az=152.28 Ze=66.495 Az status=0009 Ze status=0008 11:32:40 Check angles 11:32:40 SkyScan query 11:32:40 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:32:40 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:32:40 Message to Master queued w/err=0: serial=273141 error=0 11:32:45 Received message from Master: op=Filter serial=273142 11:32:45 Color wheel filter change from 0 to 0 11:32:45 FLIGetFilterPos err=0 currentPosition=0 11:32:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:45 Filter is already there-color wheel unchanged 11:32:46 Received message from Master: op=Shutter serial=273143 11:32:46 Shutter LASER close 11:32:46 Received message from Camera: op=State serial=273145 11:32:46 GetSingleValue result=40 Value=cccccccc 11:32:46 SkyScan query 11:32:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:32:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:46 Parameters OK 11:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:46 Set A/D data flow result=40 11:32:46 Set A/D channel type result=40 11:32:46 Set A/D encoding result=40 11:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:46 Set channel filter=0.000000e+000 result=40 11:32:46 Config A/D Result=40 11:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:46 Get A/D filter: -9.255963e+061 result=40 11:32:46 Get A/D value=-858993460 result=40 11:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:46 Parameters OK 11:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:46 Set A/D data flow result=40 11:32:46 Set A/D channel type result=40 11:32:46 Set A/D encoding result=40 11:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:46 Set channel filter=0.000000e+000 result=40 11:32:46 Config A/D Result=40 11:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:46 Get A/D filter: -9.255963e+061 result=40 11:32:46 Get A/D value=-858993460 result=40 11:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:46 Aux= 11:32:46 Message to Camera, serial 273145 queued 11:33:23 Received message from Master: op=PointingHead serial=273158 11:33:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:33:23 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:33:23 Point started: ret=0 11:33:23 point_skyscan result=0 11:33:24 Check angles 11:33:24 SkyScan query 11:33:25 SkyScan query done: ret=0 az=135.255<-9017 ze=36.915<-9539 Statuses=0009 0009 11:33:25 Msec=0 True Az=135.255 Ze=36.915 Az status=0009 Ze status=0009 11:33:25 Check angles 11:33:25 SkyScan query 11:33:26 SkyScan query done: ret=0 az=117.345<-7823 ze=15.63<-10958 Statuses=0009 0009 11:33:26 Msec=750 True Az=117.345 Ze=15.63 Az status=0009 Ze status=0009 11:33:26 Check angles 11:33:26 SkyScan query 11:33:26 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.355<-12357 Statuses=0009 0009 11:33:26 Msec=1500 True Az=99.87 Ze=-5.355 Az status=0009 Ze status=0009 11:33:26 Check angles 11:33:26 SkyScan query 11:33:27 SkyScan query done: ret=0 az=82.395<-5493 ze=-26.325<-13755 Statuses=0009 0009 11:33:27 Msec=2250 True Az=82.395 Ze=-26.325 Az status=0009 Ze status=0009 11:33:27 Check angles 11:33:27 SkyScan query 11:33:28 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.58<-14572 Statuses=0009 0008 11:33:28 Msec=3000 True Az=64.62 Ze=-38.58 Az status=0009 Ze status=0008 11:33:28 Check angles 11:33:28 SkyScan query 11:33:29 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.52<-14568 Statuses=0009 0008 11:33:29 Msec=3750 True Az=47.115 Ze=-38.52 Az status=0009 Ze status=0008 11:33:29 Check angles 11:33:29 SkyScan query 11:33:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:33:29 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:33:29 Message to Master queued w/err=0: serial=273158 error=0 11:33:34 Received message from Master: op=Filter serial=273159 11:33:34 Color wheel filter change from 0 to 0 11:33:34 FLIGetFilterPos err=0 currentPosition=0 11:33:34 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:34 Filter is already there-color wheel unchanged 11:33:34 Received message from Master: op=Shutter serial=273160 11:33:34 Shutter LASER close 11:33:35 Received message from Camera: op=State serial=273162 11:33:35 GetSingleValue result=40 Value=cccccccc 11:33:35 SkyScan query 11:33:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:33:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:35 Parameters OK 11:33:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:35 Set A/D data flow result=40 11:33:35 Set A/D channel type result=40 11:33:35 Set A/D encoding result=40 11:33:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:35 Set channel filter=0.000000e+000 result=40 11:33:35 Config A/D Result=40 11:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:35 Get A/D filter: -9.255963e+061 result=40 11:33:35 Get A/D value=-858993460 result=40 11:33:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:35 Parameters OK 11:33:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:35 Set A/D data flow result=40 11:33:35 Set A/D channel type result=40 11:33:35 Set A/D encoding result=40 11:33:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:35 Set channel filter=0.000000e+000 result=40 11:33:35 Config A/D Result=40 11:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:35 Get A/D filter: -9.255963e+061 result=40 11:33:35 Get A/D value=-858993460 result=40 11:33:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:35 Aux= 11:33:35 Message to Camera, serial 273162 queued 11:34:12 Received message from Master: op=PointingHead serial=273175 11:34:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:34:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:34:12 Point started: ret=0 11:34:12 point_skyscan result=0 11:34:13 Check angles 11:34:13 SkyScan query 11:34:14 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.115<-16541 Statuses=0009 0009 11:34:14 Msec=0 True Az=63.825 Ze=-68.115 Az status=0009 Ze status=0009 11:34:14 Check angles 11:34:14 SkyScan query 11:34:14 SkyScan query done: ret=0 az=81.165<-5411 ze=-89.1<-17940 Statuses=0009 0009 11:34:14 Msec=750 True Az=81.165 Ze=-89.1 Az status=0009 Ze status=0009 11:34:15 Check angles 11:34:15 SkyScan query 11:34:15 SkyScan query done: ret=0 az=98.82<-6588 ze=-109.995<-19333 Statuses=0009 0009 11:34:15 Msec=1500 True Az=98.82 Ze=-109.995 Az status=0009 Ze status=0009 11:34:15 Check angles 11:34:15 SkyScan query 11:34:16 SkyScan query done: ret=0 az=116.19<-7746 ze=-130.98<-20732 Statuses=0009 0009 11:34:16 Msec=2250 True Az=116.19 Ze=-130.98 Az status=0009 Ze status=0009 11:34:16 Check angles 11:34:16 SkyScan query 11:34:17 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 11:34:17 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 11:34:17 Check angles 11:34:17 SkyScan query 11:34:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:34:17 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:34:17 Message to Master queued w/err=0: serial=273175 error=0 11:34:22 Received message from Master: op=Filter serial=273176 11:34:22 Color wheel filter change from 0 to 0 11:34:22 FLIGetFilterPos err=0 currentPosition=0 11:34:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:22 Filter is already there-color wheel unchanged 11:34:23 Received message from Master: op=Shutter serial=273177 11:34:23 Shutter LASER close 11:34:23 Received message from Camera: op=State serial=273179 11:34:23 GetSingleValue result=40 Value=cccccccc 11:34:23 SkyScan query 11:34:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:34:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:23 Parameters OK 11:34:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:23 Set A/D data flow result=40 11:34:23 Set A/D channel type result=40 11:34:23 Set A/D encoding result=40 11:34:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:23 Set channel filter=0.000000e+000 result=40 11:34:23 Config A/D Result=40 11:34:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:23 Get A/D filter: -9.255963e+061 result=40 11:34:23 Get A/D value=-858993460 result=40 11:34:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:23 Parameters OK 11:34:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:23 Set A/D data flow result=40 11:34:23 Set A/D channel type result=40 11:34:23 Set A/D encoding result=40 11:34:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:23 Set channel filter=0.000000e+000 result=40 11:34:23 Config A/D Result=40 11:34:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:23 Get A/D filter: -9.255963e+061 result=40 11:34:23 Get A/D value=-858993460 result=40 11:34:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:23 Aux= 11:34:23 Message to Camera, serial 273179 queued 11:35:00 Received message from Master: op=PointingHead serial=273192 11:35:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:35:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:35:00 Point started: ret=0 11:35:00 point_skyscan result=0 11:35:01 Check angles 11:35:01 SkyScan query 11:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0009 0009 11:35:02 Msec=0 True Az=112.995 Ze=-170.925 Az status=0009 Ze status=0009 11:35:02 Check angles 11:35:02 SkyScan query 11:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:35:02 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:35:02 Message to Master queued w/err=0: serial=273192 error=0 11:35:07 Received message from Master: op=Filter serial=273193 11:35:07 Color wheel filter change from 0 to 0 11:35:07 FLIGetFilterPos err=0 currentPosition=0 11:35:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:07 Filter is already there-color wheel unchanged 11:35:08 Received message from Master: op=Shutter serial=273194 11:35:08 Shutter LASER open 11:35:08 Received message from Camera: op=State serial=273196 11:35:08 GetSingleValue result=40 Value=cccccccc 11:35:08 SkyScan query 11:35:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:35:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:08 Parameters OK 11:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:08 Set A/D data flow result=40 11:35:08 Set A/D channel type result=40 11:35:08 Set A/D encoding result=40 11:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:08 Set channel filter=0.000000e+000 result=40 11:35:08 Config A/D Result=40 11:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:08 Get A/D filter: -9.255963e+061 result=40 11:35:08 Get A/D value=-858993460 result=40 11:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:08 Parameters OK 11:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:08 Set A/D data flow result=40 11:35:08 Set A/D channel type result=40 11:35:08 Set A/D encoding result=40 11:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-19 11:35:08] 11:35:08 Set channel filter=0.000000e+000 result=40 11:35:08 Config A/D Result=40 11:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:08 Get A/D filter: -9.255963e+061 result=40 11:35:08 Get A/D value=-858993460 result=40 11:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:08 Aux= 11:35:08 Message to Camera, serial 273196 queued 11:35:17 Received message from Master: op=Shutter serial=273206 11:35:17 Shutter LASER close 11:35:17 Received message from Master: op=PointingHead serial=273210 11:35:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:35:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:35:18 Point started: ret=0 11:35:18 point_skyscan result=0 11:35:19 Check angles 11:35:19 SkyScan query 11:35:19 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.16<-21544 Statuses=0009 0009 11:35:19 Msec=0 True Az=136.095 Ze=-143.16 Az status=0009 Ze status=0009 11:35:19 Check angles 11:35:19 SkyScan query 11:35:20 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.175<-20145 Statuses=0009 0009 11:35:20 Msec=750 True Az=153.54 Ze=-122.175 Az status=0009 Ze status=0009 11:35:20 Check angles 11:35:20 SkyScan query 11:35:21 SkyScan query done: ret=0 az=171.12<-11408 ze=-101.28<-18752 Statuses=0009 0009 11:35:21 Msec=1500 True Az=171.12 Ze=-101.28 Az status=0009 Ze status=0009 11:35:21 Check angles 11:35:21 SkyScan query 11:35:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.31<-17354 Statuses=0008 0009 11:35:21 Msec=2250 True Az=176.01 Ze=-80.31 Az status=0008 Ze status=0009 11:35:22 Check angles 11:35:22 SkyScan query 11:35:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.34<-15956 Statuses=0008 0009 11:35:22 Msec=3000 True Az=175.995 Ze=-59.34 Az status=0008 Ze status=0009 11:35:22 Check angles 11:35:22 SkyScan query 11:35:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:35:23 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:35:23 Message to Master queued w/err=0: serial=273210 error=0 11:35:28 Received message from Master: op=Filter serial=273211 11:35:28 Color wheel filter change from 0 to 0 11:35:28 FLIGetFilterPos err=0 currentPosition=0 11:35:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:28 Filter is already there-color wheel unchanged 11:35:28 Received message from Master: op=Shutter serial=273212 11:35:28 Shutter LASER close 11:35:28 Received message from Camera: op=State serial=273214 11:35:28 GetSingleValue result=40 Value=cccccccc 11:35:28 SkyScan query 11:35:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:35:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:29 Parameters OK 11:35:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:29 Set A/D data flow result=40 11:35:29 Set A/D channel type result=40 11:35:29 Set A/D encoding result=40 11:35:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:29 Set channel filter=0.000000e+000 result=40 11:35:29 Config A/D Result=40 11:35:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:29 Get A/D filter: -9.255963e+061 result=40 11:35:29 Get A/D value=-858993460 result=40 11:35:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:29 Parameters OK 11:35:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:29 Set A/D data flow result=40 11:35:29 Set A/D channel type result=40 11:35:29 Set A/D encoding result=40 11:35:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:29 Set channel filter=0.000000e+000 result=40 11:35:29 Config A/D Result=40 11:35:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:29 Get A/D filter: -9.255963e+061 result=40 11:35:29 Get A/D value=-858993460 result=40 11:35:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:29 Aux= 11:35:29 Message to Camera, serial 273214 queued [UTC 2018-12-19 11:35:52] 11:36:05 Received message from Master: op=PointingHead serial=273226 11:36:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:36:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:36:05 Point started: ret=0 11:36:05 point_skyscan result=0 11:36:06 Check angles 11:36:06 SkyScan query 11:36:06 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.87<-13458 Statuses=0009 0009 11:36:06 Msec=0 True Az=152.925 Ze=-21.87 Az status=0009 Ze status=0009 11:36:07 Check angles 11:36:07 SkyScan query 11:36:07 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.45<-12030 Statuses=0009 0009 11:36:07 Msec=750 True Az=135.21 Ze=-0.45 Az status=0009 Ze status=0009 11:36:07 Check angles 11:36:07 SkyScan query 11:36:08 SkyScan query done: ret=0 az=117.6<-7840 ze=20.52<-10632 Statuses=0009 0009 11:36:08 Msec=1500 True Az=117.6 Ze=20.52 Az status=0009 Ze status=0009 11:36:08 Check angles 11:36:08 SkyScan query 11:36:09 SkyScan query done: ret=0 az=100.26<-6684 ze=41.475<-9235 Statuses=0009 0009 11:36:09 Msec=2250 True Az=100.26 Ze=41.475 Az status=0009 Ze status=0009 11:36:09 Check angles 11:36:09 SkyScan query 11:36:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 11:36:09 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 11:36:10 Check angles 11:36:10 SkyScan query 11:36:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:36:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:36:10 Message to Master queued w/err=0: serial=273226 error=0 11:36:15 Received message from Master: op=Filter serial=273227 11:36:15 Color wheel filter change from 0 to 0 11:36:15 FLIGetFilterPos err=0 currentPosition=0 11:36:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:15 Filter is already there-color wheel unchanged 11:36:15 Received message from Master: op=Shutter serial=273228 11:36:15 Shutter LASER close 11:36:15 Received message from Camera: op=State serial=273230 11:36:15 GetSingleValue result=40 Value=cccccccc 11:36:15 SkyScan query 11:36:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:36:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:16 Parameters OK 11:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:16 Set A/D data flow result=40 11:36:16 Set A/D channel type result=40 11:36:16 Set A/D encoding result=40 11:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:16 Set channel filter=0.000000e+000 result=40 11:36:16 Config A/D Result=40 11:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:16 Get A/D filter: -9.255963e+061 result=40 11:36:16 Get A/D value=-858993460 result=40 11:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:16 Parameters OK 11:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:16 Set A/D data flow result=40 11:36:16 Set A/D channel type result=40 11:36:16 Set A/D encoding result=40 11:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:16 Set channel filter=0.000000e+000 result=40 11:36:16 Config A/D Result=40 11:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:16 Get A/D filter: -9.255963e+061 result=40 11:36:16 Get A/D value=-858993460 result=40 11:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:16 Aux= 11:36:16 Message to Camera, serial 273230 queued 11:36:53 Received message from Master: op=PointingHead serial=273243 11:36:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:36:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:36:53 Point started: ret=0 11:36:53 point_skyscan result=0 11:36:54 Check angles 11:36:54 SkyScan query 11:36:54 SkyScan query done: ret=0 az=108.855<-7257 ze=38.475<-9435 Statuses=0009 0008 11:36:54 Msec=0 True Az=108.855 Ze=38.475 Az status=0009 Ze status=0008 11:36:55 Check angles 11:36:55 SkyScan query 11:36:55 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 11:36:55 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 11:36:55 Check angles 11:36:55 SkyScan query 11:36:56 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 11:36:56 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 11:36:56 Check angles 11:36:56 SkyScan query 11:36:57 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 11:36:57 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 11:36:57 Check angles 11:36:57 SkyScan query 11:36:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:36:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:36:58 Check angles 11:36:58 SkyScan query 11:36:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:36:58 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:36:58 Message to Master queued w/err=0: serial=273243 error=0 11:37:03 Received message from Master: op=Filter serial=273244 11:37:03 Color wheel filter change from 0 to 0 11:37:03 FLIGetFilterPos err=0 currentPosition=0 11:37:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:03 Filter is already there-color wheel unchanged 11:37:03 Received message from Master: op=Shutter serial=273245 11:37:03 Shutter LASER close 11:37:03 Received message from Camera: op=State serial=273247 11:37:03 GetSingleValue result=40 Value=cccccccc 11:37:03 SkyScan query 11:37:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:37:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:04 Parameters OK 11:37:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:04 Set A/D data flow result=40 11:37:04 Set A/D channel type result=40 11:37:04 Set A/D encoding result=40 11:37:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:04 Set channel filter=0.000000e+000 result=40 11:37:04 Config A/D Result=40 11:37:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:04 Get A/D filter: -9.255963e+061 result=40 11:37:04 Get A/D value=-858993460 result=40 11:37:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:04 Parameters OK 11:37:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:04 Set A/D data flow result=40 11:37:04 Set A/D channel type result=40 11:37:04 Set A/D encoding result=40 11:37:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:04 Set channel filter=0.000000e+000 result=40 11:37:04 Config A/D Result=40 11:37:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:04 Get A/D filter: -9.255963e+061 result=40 11:37:04 Get A/D value=-858993460 result=40 11:37:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:04 Aux= 11:37:04 Message to Camera, serial 273247 queued 11:37:41 Received message from Master: op=PointingHead serial=273260 11:37:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:37:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:37:41 Point started: ret=0 11:37:41 point_skyscan result=0 11:37:42 Check angles 11:37:42 SkyScan query 11:37:43 SkyScan query done: ret=0 az=153.165<-10211 ze=68.16<-7456 Statuses=0009 0009 11:37:43 Msec=0 True Az=153.165 Ze=68.16 Az status=0009 Ze status=0009 11:37:43 Check angles 11:37:43 SkyScan query 11:37:43 SkyScan query done: ret=0 az=135.705<-9047 ze=89.175<-6055 Statuses=0009 0009 11:37:43 Msec=750 True Az=135.705 Ze=89.175 Az status=0009 Ze status=0009 11:37:44 Check angles 11:37:44 SkyScan query 11:37:44 SkyScan query done: ret=0 az=118.14<-7876 ze=110.1<-4660 Statuses=0009 0009 11:37:44 Msec=1500 True Az=118.14 Ze=110.1 Az status=0009 Ze status=0009 11:37:44 Check angles 11:37:44 SkyScan query 11:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=131.07<-3262 Statuses=0008 0009 11:37:45 Msec=2250 True Az=112.995 Ze=131.07 Az status=0008 Ze status=0009 11:37:45 Check angles 11:37:45 SkyScan query 11:37:46 SkyScan query done: ret=0 az=112.995<-7533 ze=151.965<-1869 Statuses=0008 0009 11:37:46 Msec=3000 True Az=112.995 Ze=151.965 Az status=0008 Ze status=0009 11:37:46 Check angles 11:37:46 SkyScan query 11:37:46 SkyScan query done: ret=0 az=112.995<-7533 ze=172.935<-471 Statuses=0008 0009 11:37:46 Msec=3750 True Az=112.995 Ze=172.935 Az status=0008 Ze status=0009 11:37:47 Check angles 11:37:47 SkyScan query 11:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.92<-23528 Statuses=0008 0009 11:37:47 Msec=4500 True Az=112.995 Ze=-172.92 Az status=0008 Ze status=0009 11:37:47 Check angles 11:37:47 SkyScan query 11:37:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.95<-23530 Statuses=0008 0008 11:37:48 Msec=5250 True Az=112.995 Ze=-172.95 Az status=0008 Ze status=0008 11:37:48 Message to Master queued w/err=0: serial=273260 error=0 11:37:53 Received message from Master: op=Filter serial=273261 11:37:53 Color wheel filter change from 0 to 0 11:37:53 FLIGetFilterPos err=0 currentPosition=0 11:37:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:53 Filter is already there-color wheel unchanged 11:37:53 Received message from Master: op=Shutter serial=273262 11:37:53 Shutter LASER open 11:37:53 Received message from Camera: op=State serial=273264 11:37:53 GetSingleValue result=40 Value=cccccccc 11:37:53 SkyScan query 11:37:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:37:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:54 Parameters OK 11:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:54 Set A/D data flow result=40 11:37:54 Set A/D channel type result=40 11:37:54 Set A/D encoding result=40 11:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:54 Set channel filter=0.000000e+000 result=40 11:37:54 Config A/D Result=40 11:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:54 Get A/D filter: -9.255963e+061 result=40 11:37:54 Get A/D value=-858993460 result=40 11:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:54 Parameters OK 11:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:54 Set A/D data flow result=40 11:37:54 Set A/D channel type result=40 11:37:54 Set A/D encoding result=40 11:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:54 Set channel filter=0.000000e+000 result=40 11:37:54 Config A/D Result=40 11:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:54 Get A/D filter: -9.255963e+061 result=40 11:37:54 Get A/D value=-858993460 result=40 11:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:54 Aux= 11:37:54 Message to Camera, serial 273264 queued 11:38:02 Received message from Master: op=Shutter serial=273274 11:38:02 Shutter LASER close 11:38:03 Received message from Master: op=PointingHead serial=273278 11:38:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:38:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:38:03 Point started: ret=0 11:38:03 point_skyscan result=0 11:38:04 Check angles 11:38:04 SkyScan query 11:38:04 SkyScan query done: ret=0 az=89.88<-5992 ze=157.245<-1517 Statuses=0009 0009 11:38:04 Msec=0 True Az=89.88 Ze=157.245 Az status=0009 Ze status=0009 11:38:05 Check angles 11:38:05 SkyScan query 11:38:05 SkyScan query done: ret=0 az=72.075<-4805 ze=135.855<-2943 Statuses=0009 0009 11:38:05 Msec=750 True Az=72.075 Ze=135.855 Az status=0009 Ze status=0009 11:38:05 Check angles 11:38:05 SkyScan query 11:38:06 SkyScan query done: ret=0 az=54.615<-3641 ze=114.885<-4341 Statuses=0009 0009 11:38:06 Msec=1500 True Az=54.615 Ze=114.885 Az status=0009 Ze status=0009 11:38:06 Check angles 11:38:06 SkyScan query 11:38:07 SkyScan query done: ret=0 az=40.98<-2732 ze=93.915<-5739 Statuses=0009 0009 11:38:07 Msec=2250 True Az=40.98 Ze=93.915 Az status=0009 Ze status=0009 11:38:07 Check angles 11:38:07 SkyScan query 11:38:07 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 11:38:07 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 11:38:08 Check angles 11:38:08 SkyScan query 11:38:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 11:38:08 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 11:38:08 Check angles 11:38:08 SkyScan query 11:38:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:38:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:38:09 Message to Master queued w/err=0: serial=273278 error=0 11:38:14 Received message from Master: op=Filter serial=273279 11:38:14 Color wheel filter change from 0 to 0 11:38:14 FLIGetFilterPos err=0 currentPosition=0 11:38:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:14 Filter is already there-color wheel unchanged 11:38:14 Received message from Master: op=Shutter serial=273280 11:38:14 Shutter LASER close 11:38:14 Received message from Camera: op=State serial=273282 11:38:14 GetSingleValue result=40 Value=cccccccc 11:38:14 SkyScan query 11:38:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:38:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:15 Parameters OK 11:38:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:15 Set A/D data flow result=40 11:38:15 Set A/D channel type result=40 11:38:15 Set A/D encoding result=40 11:38:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:15 Set channel filter=0.000000e+000 result=40 11:38:15 Config A/D Result=40 11:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:15 Get A/D filter: -9.255963e+061 result=40 11:38:15 Get A/D value=-858993460 result=40 11:38:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:15 Parameters OK 11:38:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:15 Set A/D data flow result=40 11:38:15 Set A/D channel type result=40 11:38:15 Set A/D encoding result=40 11:38:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:15 Set channel filter=0.000000e+000 result=40 11:38:15 Config A/D Result=40 11:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:15 Get A/D filter: -9.255963e+061 result=40 11:38:15 Get A/D value=-858993460 result=40 11:38:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:15 Aux= 11:38:15 Message to Camera, serial 273282 queued 11:38:52 Received message from Master: op=PointingHead serial=273295 11:38:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:38:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:38:52 Point started: ret=0 11:38:52 point_skyscan result=0 11:38:53 Check angles 11:38:53 SkyScan query 11:38:53 SkyScan query done: ret=0 az=63.84<-4256 ze=66.555<-7563 Statuses=0009 0008 11:38:53 Msec=0 True Az=63.84 Ze=66.555 Az status=0009 Ze status=0008 11:38:53 Check angles 11:38:53 SkyScan query 11:38:54 SkyScan query done: ret=0 az=81.195<-5413 ze=66.495<-7567 Statuses=0009 0008 11:38:54 Msec=750 True Az=81.195 Ze=66.495 Az status=0009 Ze status=0008 11:38:54 Check angles 11:38:54 SkyScan query 11:38:55 SkyScan query done: ret=0 az=99.09<-6606 ze=66.495<-7567 Statuses=0009 0008 11:38:55 Msec=1500 True Az=99.09 Ze=66.495 Az status=0009 Ze status=0008 11:38:55 Check angles 11:38:55 SkyScan query 11:38:56 SkyScan query done: ret=0 az=116.535<-7769 ze=66.495<-7567 Statuses=0009 0008 11:38:56 Msec=2250 True Az=116.535 Ze=66.495 Az status=0009 Ze status=0008 11:38:56 Check angles 11:38:56 SkyScan query 11:38:56 SkyScan query done: ret=0 az=134.46<-8964 ze=66.495<-7567 Statuses=0009 0008 11:38:56 Msec=3000 True Az=134.46 Ze=66.495 Az status=0009 Ze status=0008 11:38:57 Check angles 11:38:57 SkyScan query 11:38:57 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 11:38:57 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 11:38:57 Check angles 11:38:57 SkyScan query 11:38:58 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 11:38:58 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 11:38:58 Message to Master queued w/err=0: serial=273295 error=0 11:39:03 Received message from Master: op=Filter serial=273296 11:39:03 Color wheel filter change from 0 to 0 11:39:03 FLIGetFilterPos err=0 currentPosition=0 11:39:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:03 Filter is already there-color wheel unchanged 11:39:03 Received message from Master: op=Shutter serial=273297 11:39:03 Shutter LASER close 11:39:03 Received message from Camera: op=State serial=273299 11:39:03 GetSingleValue result=40 Value=cccccccc 11:39:03 SkyScan query 11:39:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:39:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:04 Parameters OK 11:39:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:04 Set A/D data flow result=40 11:39:04 Set A/D channel type result=40 11:39:04 Set A/D encoding result=40 11:39:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:04 Set channel filter=0.000000e+000 result=40 11:39:04 Config A/D Result=40 11:39:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:04 Get A/D filter: -9.255963e+061 result=40 11:39:04 Get A/D value=-858993460 result=40 11:39:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:04 Parameters OK 11:39:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:04 Set A/D data flow result=40 11:39:04 Set A/D channel type result=40 11:39:04 Set A/D encoding result=40 11:39:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:04 Set channel filter=0.000000e+000 result=40 11:39:04 Config A/D Result=40 11:39:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:04 Get A/D filter: -9.255963e+061 result=40 11:39:04 Get A/D value=-858993460 result=40 11:39:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:04 Aux= 11:39:04 Message to Camera, serial 273299 queued 11:39:40 Received message from Master: op=PointingHead serial=273312 11:39:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:39:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:39:41 Point started: ret=0 11:39:41 point_skyscan result=0 11:39:42 Check angles 11:39:42 SkyScan query 11:39:42 SkyScan query done: ret=0 az=135.03<-9002 ze=36.75<-9550 Statuses=0009 0009 11:39:42 Msec=0 True Az=135.03 Ze=36.75 Az status=0009 Ze status=0009 11:39:42 Check angles 11:39:42 SkyScan query 11:39:43 SkyScan query done: ret=0 az=117.135<-7809 ze=15.465<-10969 Statuses=0009 0009 11:39:43 Msec=750 True Az=117.135 Ze=15.465 Az status=0009 Ze status=0009 11:39:43 Check angles 11:39:43 SkyScan query 11:39:44 SkyScan query done: ret=0 az=99.375<-6625 ze=-6.03<-12402 Statuses=0009 0009 11:39:44 Msec=1500 True Az=99.375 Ze=-6.03 Az status=0009 Ze status=0009 11:39:44 Check angles 11:39:44 SkyScan query 11:39:44 SkyScan query done: ret=0 az=81.96<-5464 ze=-27.03<-13802 Statuses=0009 0009 11:39:44 Msec=2250 True Az=81.96 Ze=-27.03 Az status=0009 Ze status=0009 11:39:45 Check angles 11:39:45 SkyScan query 11:39:45 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.58<-14572 Statuses=0009 0008 11:39:45 Msec=3000 True Az=64.44 Ze=-38.58 Az status=0009 Ze status=0008 11:39:45 Check angles 11:39:45 SkyScan query 11:39:46 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.52<-14568 Statuses=0009 0008 11:39:46 Msec=3750 True Az=46.98 Ze=-38.52 Az status=0009 Ze status=0008 11:39:46 Check angles 11:39:46 SkyScan query 11:39:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:39:47 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:39:47 Message to Master queued w/err=0: serial=273312 error=0 11:39:52 Received message from Master: op=Filter serial=273313 11:39:52 Color wheel filter change from 0 to 0 11:39:52 FLIGetFilterPos err=0 currentPosition=0 11:39:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:52 Filter is already there-color wheel unchanged 11:39:52 Received message from Master: op=Shutter serial=273314 11:39:52 Shutter LASER close 11:39:52 Received message from Camera: op=State serial=273316 11:39:52 GetSingleValue result=40 Value=cccccccc 11:39:52 SkyScan query 11:39:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:39:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:52 Parameters OK 11:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:52 Set A/D data flow result=40 11:39:52 Set A/D channel type result=40 11:39:52 Set A/D encoding result=40 11:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:52 Set channel filter=0.000000e+000 result=40 11:39:52 Config A/D Result=40 11:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:52 Get A/D filter: -9.255963e+061 result=40 11:39:52 Get A/D value=-858993460 result=40 11:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:52 Parameters OK 11:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:52 Set A/D data flow result=40 11:39:52 Set A/D channel type result=40 11:39:52 Set A/D encoding result=40 11:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:52 Set channel filter=0.000000e+000 result=40 11:39:52 Config A/D Result=40 11:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:52 Get A/D filter: -9.255963e+061 result=40 11:39:52 Get A/D value=-858993460 result=40 11:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:52 Aux= 11:39:52 Message to Camera, serial 273316 queued 11:40:28 Received message from Master: op=PointingHead serial=273328 11:40:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:40:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:40:29 Point started: ret=0 11:40:29 point_skyscan result=0 11:40:29 Check angles 11:40:29 SkyScan query 11:40:30 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.085<-16539 Statuses=0009 0009 11:40:30 Msec=0 True Az=63.81 Ze=-68.085 Az status=0009 Ze status=0009 11:40:30 Check angles 11:40:30 SkyScan query 11:40:31 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.475<-17965 Statuses=0009 0009 11:40:31 Msec=750 True Az=81.57 Ze=-89.475 Az status=0009 Ze status=0009 11:40:31 Check angles 11:40:31 SkyScan query 11:40:32 SkyScan query done: ret=0 az=99.045<-6603 ze=-110.445<-19363 Statuses=0009 0009 11:40:32 Msec=1500 True Az=99.045 Ze=-110.445 Az status=0009 Ze status=0009 11:40:32 Check angles 11:40:32 SkyScan query 11:40:32 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.355<-20757 Statuses=0009 0009 11:40:32 Msec=2250 True Az=116.61 Ze=-131.355 Az status=0009 Ze status=0009 11:40:32 Check angles 11:40:32 SkyScan query 11:40:33 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 11:40:33 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 11:40:33 Check angles 11:40:33 SkyScan query 11:40:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:40:34 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:40:34 Message to Master queued w/err=0: serial=273328 error=0 11:40:39 Received message from Master: op=Filter serial=273329 11:40:39 Color wheel filter change from 0 to 0 11:40:39 FLIGetFilterPos err=0 currentPosition=0 11:40:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:39 Filter is already there-color wheel unchanged 11:40:39 Received message from Master: op=Shutter serial=273330 11:40:39 Shutter LASER close 11:40:39 Received message from Camera: op=State serial=273332 11:40:39 GetSingleValue result=40 Value=cccccccc 11:40:39 SkyScan query 11:40:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:40:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:40 Parameters OK 11:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:40 Set A/D data flow result=40 11:40:40 Set A/D channel type result=40 11:40:40 Set A/D encoding result=40 11:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:40 Set channel filter=0.000000e+000 result=40 11:40:40 Config A/D Result=40 11:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:40 Get A/D filter: -9.255963e+061 result=40 11:40:40 Get A/D value=-858993460 result=40 11:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:40 Parameters OK 11:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:40 Set A/D data flow result=40 11:40:40 Set A/D channel type result=40 11:40:40 Set A/D encoding result=40 11:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:40 Set channel filter=0.000000e+000 result=40 11:40:40 Config A/D Result=40 11:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:40 Get A/D filter: -9.255963e+061 result=40 11:40:40 Get A/D value=-858993460 result=40 11:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:40 Aux= 11:40:40 Message to Camera, serial 273332 queued 11:41:16 Received message from Master: op=PointingHead serial=273345 11:41:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:41:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:41:17 Point started: ret=0 11:41:17 point_skyscan result=0 11:41:18 Check angles 11:41:18 SkyScan query 11:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0009 0009 11:41:18 Msec=0 True Az=112.995 Ze=-170.925 Az status=0009 Ze status=0009 11:41:18 Check angles 11:41:18 SkyScan query 11:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:41:19 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:41:19 Message to Master queued w/err=0: serial=273345 error=0 11:41:24 Received message from Master: op=Filter serial=273346 11:41:24 Color wheel filter change from 0 to 0 11:41:24 FLIGetFilterPos err=0 currentPosition=0 11:41:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:24 Filter is already there-color wheel unchanged 11:41:24 Received message from Master: op=Shutter serial=273347 11:41:24 Shutter LASER open 11:41:24 Received message from Camera: op=State serial=273349 11:41:24 GetSingleValue result=40 Value=cccccccc 11:41:24 SkyScan query 11:41:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:41:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:25 Parameters OK 11:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:25 Set A/D data flow result=40 11:41:25 Set A/D channel type result=40 11:41:25 Set A/D encoding result=40 11:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:25 Set channel filter=0.000000e+000 result=40 11:41:25 Config A/D Result=40 11:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:25 Get A/D filter: -9.255963e+061 result=40 11:41:25 Get A/D value=-858993460 result=40 11:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:25 Parameters OK 11:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:25 Set A/D data flow result=40 11:41:25 Set A/D channel type result=40 11:41:25 Set A/D encoding result=40 11:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:25 Set channel filter=0.000000e+000 result=40 11:41:25 Config A/D Result=40 11:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:25 Get A/D filter: -9.255963e+061 result=40 11:41:25 Get A/D value=-858993460 result=40 11:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:25 Aux= 11:41:25 Message to Camera, serial 273349 queued 11:41:33 Received message from Master: op=Shutter serial=273359 11:41:33 Shutter LASER close 11:41:34 Received message from Master: op=PointingHead serial=273363 11:41:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:41:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:41:34 Point started: ret=0 11:41:34 point_skyscan result=0 11:41:35 Check angles 11:41:35 SkyScan query 11:41:36 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.965<-21531 Statuses=0009 0009 11:41:36 Msec=0 True Az=136.215 Ze=-142.965 Az status=0009 Ze status=0009 11:41:36 Check angles 11:41:36 SkyScan query 11:41:36 SkyScan query done: ret=0 az=153.69<-10246 ze=-121.98<-20132 Statuses=0009 0009 11:41:36 Msec=750 True Az=153.69 Ze=-121.98 Az status=0009 Ze status=0009 11:41:36 Check angles 11:41:36 SkyScan query 11:41:37 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.025<-18735 Statuses=0009 0009 11:41:37 Msec=1500 True Az=171.18 Ze=-101.025 Az status=0009 Ze status=0009 11:41:37 Check angles 11:41:37 SkyScan query 11:41:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.115<-17341 Statuses=0008 0009 11:41:38 Msec=2250 True Az=176.01 Ze=-80.115 Az status=0008 Ze status=0009 11:41:38 Check angles 11:41:38 SkyScan query 11:41:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.13<-15942 Statuses=0008 0009 11:41:39 Msec=3000 True Az=175.995 Ze=-59.13 Az status=0008 Ze status=0009 11:41:39 Check angles 11:41:39 SkyScan query 11:41:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:41:39 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:41:39 Message to Master queued w/err=0: serial=273363 error=0 11:41:44 Received message from Master: op=Filter serial=273364 11:41:44 Color wheel filter change from 0 to 0 11:41:44 FLIGetFilterPos err=0 currentPosition=0 11:41:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:44 Filter is already there-color wheel unchanged 11:41:44 Received message from Master: op=Shutter serial=273365 11:41:44 Shutter LASER close 11:41:45 Received message from Camera: op=State serial=273367 11:41:45 GetSingleValue result=40 Value=cccccccc 11:41:45 SkyScan query 11:41:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:41:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:45 Parameters OK 11:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:45 Set A/D data flow result=40 11:41:45 Set A/D channel type result=40 11:41:45 Set A/D encoding result=40 11:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:45 Set channel filter=0.000000e+000 result=40 11:41:45 Config A/D Result=40 11:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:45 Get A/D filter: -9.255963e+061 result=40 11:41:45 Get A/D value=-858993460 result=40 11:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:45 Parameters OK 11:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:45 Set A/D data flow result=40 11:41:45 Set A/D channel type result=40 11:41:45 Set A/D encoding result=40 11:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:45 Set channel filter=0.000000e+000 result=40 11:41:45 Config A/D Result=40 11:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:45 Get A/D filter: -9.255963e+061 result=40 11:41:45 Get A/D value=-858993460 result=40 11:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:45 Aux= 11:41:45 Message to Camera, serial 273367 queued 11:42:22 Received message from Master: op=PointingHead serial=273380 11:42:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:42:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:42:22 Point started: ret=0 11:42:22 point_skyscan result=0 11:42:23 Check angles 11:42:23 SkyScan query 11:42:24 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.6<-13440 Statuses=0009 0009 11:42:24 Msec=0 True Az=152.775 Ze=-21.6 Az status=0009 Ze status=0009 11:42:24 Check angles 11:42:24 SkyScan query 11:42:24 SkyScan query done: ret=0 az=134.94<-8996 ze=-0.18<-12012 Statuses=0009 0009 11:42:24 Msec=750 True Az=134.94 Ze=-0.18 Az status=0009 Ze status=0009 11:42:25 Check angles 11:42:25 SkyScan query 11:42:25 SkyScan query done: ret=0 az=117.57<-7838 ze=20.805<-10613 Statuses=0009 0009 11:42:25 Msec=1500 True Az=117.57 Ze=20.805 Az status=0009 Ze status=0009 11:42:25 Check angles 11:42:25 SkyScan query 11:42:26 SkyScan query done: ret=0 az=100.14<-6676 ze=41.7<-9220 Statuses=0009 0009 11:42:26 Msec=2250 True Az=100.14 Ze=41.7 Az status=0009 Ze status=0009 11:42:26 Check angles 11:42:26 SkyScan query 11:42:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 11:42:27 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 11:42:27 Check angles 11:42:27 SkyScan query 11:42:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:42:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:42:27 Message to Master queued w/err=0: serial=273380 error=0 11:42:32 Received message from Master: op=Filter serial=273381 11:42:32 Color wheel filter change from 0 to 0 11:42:32 FLIGetFilterPos err=0 currentPosition=0 11:42:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:32 Filter is already there-color wheel unchanged 11:42:33 Received message from Master: op=Shutter serial=273382 11:42:33 Shutter LASER close 11:42:33 Received message from Camera: op=State serial=273384 11:42:33 GetSingleValue result=40 Value=cccccccc 11:42:33 SkyScan query 11:42:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:42:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:33 Parameters OK 11:42:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:33 Set A/D data flow result=40 11:42:33 Set A/D channel type result=40 11:42:33 Set A/D encoding result=40 11:42:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:33 Set channel filter=0.000000e+000 result=40 11:42:33 Config A/D Result=40 11:42:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:33 Get A/D filter: -9.255963e+061 result=40 11:42:33 Get A/D value=-858993460 result=40 11:42:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:33 Parameters OK 11:42:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:33 Set A/D data flow result=40 11:42:33 Set A/D channel type result=40 11:42:33 Set A/D encoding result=40 11:42:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:33 Set channel filter=0.000000e+000 result=40 11:42:33 Config A/D Result=40 11:42:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:33 Get A/D filter: -9.255963e+061 result=40 11:42:33 Get A/D value=-858993460 result=40 11:42:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:33 Aux= 11:42:33 Message to Camera, serial 273384 queued 11:43:10 Received message from Master: op=PointingHead serial=273397 11:43:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:43:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:43:10 Point started: ret=0 11:43:10 point_skyscan result=0 11:43:11 Check angles 11:43:11 SkyScan query 11:43:12 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 11:43:12 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 11:43:12 Check angles 11:43:12 SkyScan query 11:43:13 SkyScan query done: ret=0 az=126.285<-8419 ze=38.505<-9433 Statuses=0009 0008 11:43:13 Msec=750 True Az=126.285 Ze=38.505 Az status=0009 Ze status=0008 11:43:13 Check angles 11:43:13 SkyScan query 11:43:13 SkyScan query done: ret=0 az=143.79<-9586 ze=38.505<-9433 Statuses=0009 0008 11:43:13 Msec=1500 True Az=143.79 Ze=38.505 Az status=0009 Ze status=0008 11:43:13 Check angles 11:43:13 SkyScan query 11:43:14 SkyScan query done: ret=0 az=161.085<-10739 ze=38.505<-9433 Statuses=0009 0008 11:43:14 Msec=2250 True Az=161.085 Ze=38.505 Az status=0009 Ze status=0008 11:43:14 Check angles 11:43:14 SkyScan query 11:43:15 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:43:15 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:43:15 Check angles 11:43:15 SkyScan query 11:43:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:43:16 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:43:16 Message to Master queued w/err=0: serial=273397 error=0 11:43:21 Received message from Master: op=Filter serial=273398 11:43:21 Color wheel filter change from 0 to 0 11:43:21 FLIGetFilterPos err=0 currentPosition=0 11:43:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:21 Filter is already there-color wheel unchanged 11:43:21 Received message from Master: op=Shutter serial=273399 11:43:21 Shutter LASER close 11:43:21 Received message from Camera: op=State serial=273401 11:43:21 GetSingleValue result=40 Value=cccccccc 11:43:21 SkyScan query 11:43:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:43:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:21 Parameters OK 11:43:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:21 Set A/D data flow result=40 11:43:21 Set A/D channel type result=40 11:43:21 Set A/D encoding result=40 11:43:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:21 Set channel filter=0.000000e+000 result=40 11:43:21 Config A/D Result=40 11:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:21 Get A/D filter: -9.255963e+061 result=40 11:43:21 Get A/D value=-858993460 result=40 11:43:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:21 Parameters OK 11:43:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:21 Set A/D data flow result=40 11:43:21 Set A/D channel type result=40 11:43:21 Set A/D encoding result=40 11:43:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:21 Set channel filter=0.000000e+000 result=40 11:43:21 Config A/D Result=40 11:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:21 Get A/D filter: -9.255963e+061 result=40 11:43:21 Get A/D value=-858993460 result=40 11:43:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:21 Aux= 11:43:21 Message to Camera, serial 273401 queued 11:43:58 Received message from Master: op=PointingHead serial=273414 11:43:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:43:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:43:59 Point started: ret=0 11:43:59 point_skyscan result=0 11:43:59 Check angles 11:43:59 SkyScan query 11:44:00 SkyScan query done: ret=0 az=152.91<-10194 ze=68.445<-7437 Statuses=0009 0009 11:44:00 Msec=0 True Az=152.91 Ze=68.445 Az status=0009 Ze status=0009 11:44:00 Check angles 11:44:00 SkyScan query 11:44:01 SkyScan query done: ret=0 az=135.36<-9024 ze=89.46<-6036 Statuses=0009 0009 11:44:01 Msec=750 True Az=135.36 Ze=89.46 Az status=0009 Ze status=0009 11:44:01 Check angles 11:44:01 SkyScan query 11:44:01 SkyScan query done: ret=0 az=117.855<-7857 ze=110.37<-4642 Statuses=0009 0009 11:44:01 Msec=1500 True Az=117.855 Ze=110.37 Az status=0009 Ze status=0009 11:44:02 Check angles 11:44:02 SkyScan query 11:44:02 SkyScan query done: ret=0 az=112.995<-7533 ze=131.37<-3242 Statuses=0008 0009 11:44:02 Msec=2250 True Az=112.995 Ze=131.37 Az status=0008 Ze status=0009 11:44:02 Check angles 11:44:02 SkyScan query 11:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=152.25<-1850 Statuses=0008 0009 11:44:03 Msec=3000 True Az=112.995 Ze=152.25 Az status=0008 Ze status=0009 11:44:03 Check angles 11:44:03 SkyScan query 11:44:04 SkyScan query done: ret=0 az=112.995<-7533 ze=173.685<-421 Statuses=0008 0009 11:44:04 Msec=3750 True Az=112.995 Ze=173.685 Az status=0008 Ze status=0009 11:44:04 Check angles 11:44:04 SkyScan query 11:44:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 11:44:04 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 11:44:04 Message to Master queued w/err=0: serial=273414 error=0 11:44:09 Received message from Master: op=Filter serial=273415 11:44:09 Color wheel filter change from 0 to 0 11:44:09 FLIGetFilterPos err=0 currentPosition=0 11:44:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:09 Filter is already there-color wheel unchanged 11:44:10 Received message from Master: op=Shutter serial=273416 11:44:10 Shutter LASER open 11:44:10 Received message from Camera: op=State serial=273418 11:44:10 GetSingleValue result=40 Value=cccccccc 11:44:10 SkyScan query 11:44:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:44:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:10 Parameters OK 11:44:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:10 Set A/D data flow result=40 11:44:10 Set A/D channel type result=40 11:44:10 Set A/D encoding result=40 11:44:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:10 Set channel filter=0.000000e+000 result=40 11:44:10 Config A/D Result=40 11:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:10 Get A/D filter: -9.255963e+061 result=40 11:44:10 Get A/D value=-858993460 result=40 11:44:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:10 Parameters OK 11:44:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:10 Set A/D data flow result=40 11:44:10 Set A/D channel type result=40 11:44:10 Set A/D encoding result=40 11:44:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:10 Set channel filter=0.000000e+000 result=40 11:44:10 Config A/D Result=40 11:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:10 Get A/D filter: -9.255963e+061 result=40 11:44:10 Get A/D value=-858993460 result=40 11:44:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:10 Aux= 11:44:10 Message to Camera, serial 273418 queued 11:44:19 Received message from Master: op=Shutter serial=273428 11:44:19 Shutter LASER close 11:44:19 Received message from Master: op=PointingHead serial=273432 11:44:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:44:19 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:44:20 Point started: ret=0 11:44:20 point_skyscan result=0 11:44:20 Check angles 11:44:20 SkyScan query 11:44:21 SkyScan query done: ret=0 az=89.88<-5992 ze=157.245<-1517 Statuses=0009 0009 11:44:21 Msec=0 True Az=89.88 Ze=157.245 Az status=0009 Ze status=0009 11:44:21 Check angles 11:44:21 SkyScan query 11:44:22 SkyScan query done: ret=0 az=72.345<-4823 ze=136.26<-2916 Statuses=0009 0009 11:44:22 Msec=750 True Az=72.345 Ze=136.26 Az status=0009 Ze status=0009 11:44:22 Check angles 11:44:22 SkyScan query 11:44:23 SkyScan query done: ret=0 az=54.99<-3666 ze=115.38<-4308 Statuses=0009 0009 11:44:23 Msec=1500 True Az=54.99 Ze=115.38 Az status=0009 Ze status=0009 11:44:23 Check angles 11:44:23 SkyScan query 11:44:23 SkyScan query done: ret=0 az=40.98<-2732 ze=94.335<-5711 Statuses=0009 0009 11:44:23 Msec=2250 True Az=40.98 Ze=94.335 Az status=0009 Ze status=0009 11:44:23 Check angles 11:44:23 SkyScan query 11:44:24 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 11:44:24 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 11:44:24 Check angles 11:44:24 SkyScan query 11:44:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 11:44:25 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 11:44:25 Check angles 11:44:25 SkyScan query 11:44:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:44:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:44:26 Message to Master queued w/err=0: serial=273432 error=0 11:44:31 Received message from Master: op=Filter serial=273433 11:44:31 Color wheel filter change from 0 to 0 11:44:31 FLIGetFilterPos err=0 currentPosition=0 11:44:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:31 Filter is already there-color wheel unchanged 11:44:31 Received message from Master: op=Shutter serial=273434 11:44:31 Shutter LASER close 11:44:31 Received message from Camera: op=State serial=273436 11:44:31 GetSingleValue result=40 Value=cccccccc 11:44:31 SkyScan query 11:44:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:44:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:31 Parameters OK 11:44:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:31 Set A/D data flow result=40 11:44:31 Set A/D channel type result=40 11:44:31 Set A/D encoding result=40 11:44:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:31 Set channel filter=0.000000e+000 result=40 11:44:31 Config A/D Result=40 11:44:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:31 Get A/D filter: -9.255963e+061 result=40 11:44:31 Get A/D value=-858993460 result=40 11:44:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:31 Parameters OK 11:44:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:31 Set A/D data flow result=40 11:44:31 Set A/D channel type result=40 11:44:31 Set A/D encoding result=40 11:44:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:31 Set channel filter=0.000000e+000 result=40 11:44:31 Config A/D Result=40 11:44:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:31 Get A/D filter: -9.255963e+061 result=40 11:44:31 Get A/D value=-858993460 result=40 11:44:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:31 Aux= 11:44:31 Message to Camera, serial 273436 queued 11:45:08 Received message from Master: op=PointingHead serial=273449 11:45:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:45:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:45:09 Point started: ret=0 11:45:09 point_skyscan result=0 11:45:09 Check angles 11:45:09 SkyScan query 11:45:10 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 11:45:10 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 11:45:10 Check angles 11:45:10 SkyScan query 11:45:11 SkyScan query done: ret=0 az=81.705<-5447 ze=66.51<-7566 Statuses=0009 0008 11:45:11 Msec=750 True Az=81.705 Ze=66.51 Az status=0009 Ze status=0008 11:45:11 Check angles 11:45:11 SkyScan query 11:45:11 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 11:45:11 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 11:45:12 Check angles 11:45:12 SkyScan query 11:45:12 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 11:45:12 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 11:45:12 Check angles 11:45:12 SkyScan query 11:45:13 SkyScan query done: ret=0 az=134.055<-8937 ze=66.495<-7567 Statuses=0009 0008 11:45:13 Msec=3000 True Az=134.055 Ze=66.495 Az status=0009 Ze status=0008 11:45:13 Check angles 11:45:13 SkyScan query 11:45:14 SkyScan query done: ret=0 az=151.83<-10122 ze=66.495<-7567 Statuses=0009 0008 11:45:14 Msec=3750 True Az=151.83 Ze=66.495 Az status=0009 Ze status=0008 11:45:14 Check angles 11:45:14 SkyScan query 11:45:14 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:45:14 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:45:14 Message to Master queued w/err=0: serial=273449 error=0 11:45:19 Received message from Master: op=Filter serial=273450 11:45:19 Color wheel filter change from 0 to 0 11:45:19 FLIGetFilterPos err=0 currentPosition=0 11:45:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:19 Filter is already there-color wheel unchanged 11:45:20 Received message from Master: op=Shutter serial=273451 11:45:20 Shutter LASER close 11:45:20 Received message from Camera: op=State serial=273453 11:45:20 GetSingleValue result=40 Value=cccccccc 11:45:20 SkyScan query 11:45:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:45:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:20 Parameters OK 11:45:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:20 Set A/D data flow result=40 11:45:20 Set A/D channel type result=40 11:45:20 Set A/D encoding result=40 11:45:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:20 Set channel filter=0.000000e+000 result=40 11:45:20 Config A/D Result=40 11:45:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:20 Get A/D filter: -9.255963e+061 result=40 11:45:20 Get A/D value=-858993460 result=40 11:45:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 [UTC 2018-12-19 11:45:20] 11:45:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:20 Parameters OK 11:45:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:20 Set A/D data flow result=40 11:45:20 Set A/D channel type result=40 11:45:20 Set A/D encoding result=40 11:45:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:20 Set channel filter=0.000000e+000 result=40 11:45:20 Config A/D Result=40 11:45:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:20 Get A/D filter: -9.255963e+061 result=40 11:45:20 Get A/D value=-858993460 result=40 11:45:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:20 Aux= 11:45:20 Message to Camera, serial 273453 queued 11:45:27 Received message from Master: op=Identify serial=273454 11:45:57 Received message from Master: op=PointingHead serial=273469 11:45:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:45:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:45:57 Point started: ret=0 11:45:57 point_skyscan result=0 11:45:58 Check angles 11:45:58 SkyScan query 11:45:59 SkyScan query done: ret=0 az=135.18<-9012 ze=36.855<-9543 Statuses=0009 0009 11:45:59 Msec=0 True Az=135.18 Ze=36.855 Az status=0009 Ze status=0009 11:45:59 Check angles 11:45:59 SkyScan query 11:45:59 SkyScan query done: ret=0 az=117.345<-7823 ze=15.585<-10961 Statuses=0009 0009 11:45:59 Msec=750 True Az=117.345 Ze=15.585 Az status=0009 Ze status=0009 11:46:00 Check angles 11:46:00 SkyScan query 11:46:00 SkyScan query done: ret=0 az=99.585<-6639 ze=-5.865<-12391 Statuses=0009 0009 11:46:00 Msec=1500 True Az=99.585 Ze=-5.865 Az status=0009 Ze status=0009 11:46:00 Check angles 11:46:00 SkyScan query 11:46:01 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.985<-13799 Statuses=0009 0009 11:46:01 Msec=2250 True Az=82.155 Ze=-26.985 Az status=0009 Ze status=0009 11:46:01 Check angles 11:46:01 SkyScan query 11:46:02 SkyScan query done: ret=0 az=64.56<-4304 ze=-38.565<-14571 Statuses=0009 0008 11:46:02 Msec=3000 True Az=64.56 Ze=-38.565 Az status=0009 Ze status=0008 11:46:02 Check angles 11:46:02 SkyScan query 11:46:03 SkyScan query done: ret=0 az=47.085<-3139 ze=-38.535<-14569 Statuses=0009 0008 11:46:03 Msec=3750 True Az=47.085 Ze=-38.535 Az status=0009 Ze status=0008 11:46:03 Check angles 11:46:03 SkyScan query 11:46:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:46:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:46:03 Message to Master queued w/err=0: serial=273469 error=0 11:46:08 Received message from Master: op=Filter serial=273470 11:46:08 Color wheel filter change from 0 to 0 11:46:08 FLIGetFilterPos err=0 currentPosition=0 11:46:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:08 Filter is already there-color wheel unchanged 11:46:08 Received message from Master: op=Shutter serial=273471 11:46:08 Shutter LASER close 11:46:08 Received message from Camera: op=State serial=273473 11:46:08 GetSingleValue result=40 Value=cccccccc 11:46:08 SkyScan query 11:46:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:46:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:09 Parameters OK 11:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:09 Set A/D data flow result=40 11:46:09 Set A/D channel type result=40 11:46:09 Set A/D encoding result=40 11:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:09 Set channel filter=0.000000e+000 result=40 11:46:09 Config A/D Result=40 11:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:09 Get A/D filter: -9.255963e+061 result=40 11:46:09 Get A/D value=-858993460 result=40 11:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:09 Parameters OK 11:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:09 Set A/D data flow result=40 11:46:09 Set A/D channel type result=40 11:46:09 Set A/D encoding result=40 11:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:09 Set channel filter=0.000000e+000 result=40 11:46:09 Config A/D Result=40 11:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:09 Get A/D filter: -9.255963e+061 result=40 11:46:09 Get A/D value=-858993460 result=40 11:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:09 Aux= 11:46:09 Message to Camera, serial 273473 queued 11:46:46 Received message from Master: op=PointingHead serial=273486 11:46:46 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:46:46 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:46:46 Point started: ret=0 11:46:46 point_skyscan result=0 11:46:47 Check angles 11:46:47 SkyScan query 11:46:48 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.805<-16587 Statuses=0009 0009 11:46:48 Msec=0 True Az=64.41 Ze=-68.805 Az status=0009 Ze status=0009 11:46:48 Check angles 11:46:48 SkyScan query 11:46:48 SkyScan query done: ret=0 az=81.87<-5458 ze=-89.73<-17982 Statuses=0009 0009 11:46:48 Msec=750 True Az=81.87 Ze=-89.73 Az status=0009 Ze status=0009 11:46:49 Check angles 11:46:49 SkyScan query 11:46:49 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.715<-19381 Statuses=0009 0009 11:46:49 Msec=1500 True Az=99.36 Ze=-110.715 Az status=0009 Ze status=0009 11:46:49 Check angles 11:46:49 SkyScan query 11:46:50 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.61<-20774 Statuses=0009 0009 11:46:50 Msec=2250 True Az=116.76 Ze=-131.61 Az status=0009 Ze status=0009 11:46:50 Check angles 11:46:50 SkyScan query 11:46:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 11:46:51 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 11:46:51 Check angles 11:46:51 SkyScan query 11:46:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:46:51 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:46:51 Message to Master queued w/err=0: serial=273486 error=0 11:46:56 Received message from Master: op=Filter serial=273487 11:46:56 Color wheel filter change from 0 to 0 11:46:56 FLIGetFilterPos err=0 currentPosition=0 11:46:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:56 Filter is already there-color wheel unchanged 11:46:57 Received message from Master: op=Shutter serial=273488 11:46:57 Shutter LASER close 11:46:57 Received message from Camera: op=State serial=273490 11:46:57 GetSingleValue result=40 Value=cccccccc 11:46:57 SkyScan query 11:46:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:46:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:57 Parameters OK 11:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:57 Set A/D data flow result=40 11:46:57 Set A/D channel type result=40 11:46:57 Set A/D encoding result=40 11:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:57 Set channel filter=0.000000e+000 result=40 11:46:57 Config A/D Result=40 11:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:57 Get A/D filter: -9.255963e+061 result=40 11:46:57 Get A/D value=-858993460 result=40 11:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:57 Parameters OK 11:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:57 Set A/D data flow result=40 11:46:57 Set A/D channel type result=40 11:46:57 Set A/D encoding result=40 11:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:57 Set channel filter=0.000000e+000 result=40 11:46:57 Config A/D Result=40 11:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:57 Get A/D filter: -9.255963e+061 result=40 11:46:57 Get A/D value=-858993460 result=40 11:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:57 Aux= 11:46:57 Message to Camera, serial 273490 queued 11:47:34 Received message from Master: op=PointingHead serial=273503 11:47:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:47:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:47:34 Point started: ret=0 11:47:34 point_skyscan result=0 11:47:35 Check angles 11:47:35 SkyScan query 11:47:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 11:47:36 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 11:47:36 Check angles 11:47:36 SkyScan query 11:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:47:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:47:36 Message to Master queued w/err=0: serial=273503 error=0 11:47:41 Received message from Master: op=Filter serial=273504 11:47:41 Color wheel filter change from 0 to 0 11:47:41 FLIGetFilterPos err=0 currentPosition=0 11:47:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:41 Filter is already there-color wheel unchanged 11:47:42 Received message from Master: op=Shutter serial=273505 11:47:42 Shutter LASER open 11:47:42 Received message from Camera: op=State serial=273507 11:47:42 GetSingleValue result=40 Value=cccccccc 11:47:42 SkyScan query 11:47:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:47:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:42 Parameters OK 11:47:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:42 Set A/D data flow result=40 11:47:42 Set A/D channel type result=40 11:47:42 Set A/D encoding result=40 11:47:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:42 Set channel filter=0.000000e+000 result=40 11:47:42 Config A/D Result=40 11:47:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:42 Get A/D filter: -9.255963e+061 result=40 11:47:42 Get A/D value=-858993460 result=40 11:47:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:42 Parameters OK 11:47:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:42 Set A/D data flow result=40 11:47:42 Set A/D channel type result=40 11:47:42 Set A/D encoding result=40 11:47:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:42 Set channel filter=0.000000e+000 result=40 11:47:42 Config A/D Result=40 11:47:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:42 Get A/D filter: -9.255963e+061 result=40 11:47:42 Get A/D value=-858993460 result=40 11:47:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:42 Aux= 11:47:42 Message to Camera, serial 273507 queued 11:47:51 Received message from Master: op=Shutter serial=273517 11:47:51 Shutter LASER close 11:47:51 Received message from Master: op=PointingHead serial=273521 11:47:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:47:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:47:52 Point started: ret=0 11:47:52 point_skyscan result=0 11:47:52 Check angles 11:47:52 SkyScan query 11:47:53 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.58<-21572 Statuses=0009 0009 11:47:53 Msec=0 True Az=135.705 Ze=-143.58 Az status=0009 Ze status=0009 11:47:53 Check angles 11:47:53 SkyScan query 11:47:54 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.58<-20172 Statuses=0009 0009 11:47:54 Msec=750 True Az=153.24 Ze=-122.58 Az status=0009 Ze status=0009 11:47:54 Check angles 11:47:54 SkyScan query 11:47:55 SkyScan query done: ret=0 az=170.7<-11380 ze=-101.715<-18781 Statuses=0009 0009 11:47:55 Msec=1500 True Az=170.7 Ze=-101.715 Az status=0009 Ze status=0009 11:47:55 Check angles 11:47:55 SkyScan query 11:47:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.655<-17377 Statuses=0008 0009 11:47:55 Msec=2250 True Az=175.995 Ze=-80.655 Az status=0008 Ze status=0009 11:47:55 Check angles 11:47:55 SkyScan query 11:47:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.775<-15985 Statuses=0008 0009 11:47:56 Msec=3000 True Az=175.995 Ze=-59.775 Az status=0008 Ze status=0009 11:47:56 Check angles 11:47:56 SkyScan query 11:47:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:47:57 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:47:57 Message to Master queued w/err=0: serial=273521 error=0 11:48:02 Received message from Master: op=Filter serial=273522 11:48:02 Color wheel filter change from 0 to 0 11:48:02 FLIGetFilterPos err=0 currentPosition=0 11:48:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:02 Filter is already there-color wheel unchanged 11:48:02 Received message from Master: op=Shutter serial=273523 11:48:02 Shutter LASER close 11:48:02 Received message from Camera: op=State serial=273525 11:48:02 GetSingleValue result=40 Value=cccccccc 11:48:02 SkyScan query 11:48:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:48:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:03 Parameters OK 11:48:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:03 Set A/D data flow result=40 11:48:03 Set A/D channel type result=40 11:48:03 Set A/D encoding result=40 11:48:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:03 Set channel filter=0.000000e+000 result=40 11:48:03 Config A/D Result=40 11:48:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:03 Get A/D filter: -9.255963e+061 result=40 11:48:03 Get A/D value=-858993460 result=40 11:48:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:03 Parameters OK 11:48:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:03 Set A/D data flow result=40 11:48:03 Set A/D channel type result=40 11:48:03 Set A/D encoding result=40 11:48:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:03 Set channel filter=0.000000e+000 result=40 11:48:03 Config A/D Result=40 11:48:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:03 Get A/D filter: -9.255963e+061 result=40 11:48:03 Get A/D value=-858993460 result=40 11:48:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:03 Aux= 11:48:03 Message to Camera, serial 273525 queued 11:48:40 Received message from Master: op=PointingHead serial=273538 11:48:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:48:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:48:40 Point started: ret=0 11:48:40 point_skyscan result=0 11:48:41 Check angles 11:48:41 SkyScan query 11:48:41 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.39<-13426 Statuses=0009 0009 11:48:41 Msec=0 True Az=152.775 Ze=-21.39 Az status=0009 Ze status=0009 11:48:41 Check angles 11:48:41 SkyScan query 11:48:42 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.45<-12030 Statuses=0009 0009 11:48:42 Msec=750 True Az=135.165 Ze=-0.45 Az status=0009 Ze status=0009 11:48:42 Check angles 11:48:42 SkyScan query 11:48:43 SkyScan query done: ret=0 az=117.81<-7854 ze=20.52<-10632 Statuses=0009 0009 11:48:43 Msec=1500 True Az=117.81 Ze=20.52 Az status=0009 Ze status=0009 11:48:43 Check angles 11:48:43 SkyScan query 11:48:43 SkyScan query done: ret=0 az=100.05<-6670 ze=41.865<-9209 Statuses=0009 0009 11:48:43 Msec=2250 True Az=100.05 Ze=41.865 Az status=0009 Ze status=0009 11:48:44 Check angles 11:48:44 SkyScan query 11:48:44 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 11:48:44 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 11:48:44 Check angles 11:48:44 SkyScan query 11:48:45 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 11:48:45 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 11:48:45 Message to Master queued w/err=0: serial=273538 error=0 11:48:50 Received message from Master: op=Filter serial=273539 11:48:50 Color wheel filter change from 0 to 0 11:48:50 FLIGetFilterPos err=0 currentPosition=0 11:48:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:50 Filter is already there-color wheel unchanged 11:48:50 Received message from Master: op=Shutter serial=273540 11:48:50 Shutter LASER close 11:48:50 Received message from Camera: op=State serial=273542 11:48:50 GetSingleValue result=40 Value=cccccccc 11:48:50 SkyScan query 11:48:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:48:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:51 Parameters OK 11:48:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:51 Set A/D data flow result=40 11:48:51 Set A/D channel type result=40 11:48:51 Set A/D encoding result=40 11:48:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:51 Set channel filter=0.000000e+000 result=40 11:48:51 Config A/D Result=40 11:48:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:51 Get A/D filter: -9.255963e+061 result=40 11:48:51 Get A/D value=-858993460 result=40 11:48:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:51 Parameters OK 11:48:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:51 Set A/D data flow result=40 11:48:51 Set A/D channel type result=40 11:48:51 Set A/D encoding result=40 11:48:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:51 Set channel filter=0.000000e+000 result=40 11:48:51 Config A/D Result=40 11:48:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:51 Get A/D filter: -9.255963e+061 result=40 11:48:51 Get A/D value=-858993460 result=40 11:48:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:51 Aux= 11:48:51 Message to Camera, serial 273542 queued 11:49:27 Received message from Master: op=PointingHead serial=273554 11:49:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:49:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:49:27 Point started: ret=0 11:49:27 point_skyscan result=0 11:49:28 Check angles 11:49:28 SkyScan query 11:49:28 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 11:49:28 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 11:49:29 Check angles 11:49:29 SkyScan query 11:49:29 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 11:49:29 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 11:49:29 Check angles 11:49:29 SkyScan query 11:49:30 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 11:49:30 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 11:49:30 Check angles 11:49:30 SkyScan query 11:49:31 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 11:49:31 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 11:49:31 Check angles 11:49:31 SkyScan query 11:49:31 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:49:31 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:49:32 Check angles 11:49:32 SkyScan query 11:49:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:49:32 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:49:32 Message to Master queued w/err=0: serial=273554 error=0 11:49:37 Received message from Master: op=Filter serial=273555 11:49:37 Color wheel filter change from 0 to 0 11:49:37 FLIGetFilterPos err=0 currentPosition=0 11:49:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:37 Filter is already there-color wheel unchanged 11:49:37 Received message from Master: op=Shutter serial=273556 11:49:37 Shutter LASER close 11:49:37 Received message from Camera: op=State serial=273558 11:49:37 GetSingleValue result=40 Value=cccccccc 11:49:37 SkyScan query 11:49:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:49:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:38 Parameters OK 11:49:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:38 Set A/D data flow result=40 11:49:38 Set A/D channel type result=40 11:49:38 Set A/D encoding result=40 11:49:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:38 Set channel filter=0.000000e+000 result=40 11:49:38 Config A/D Result=40 11:49:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:38 Get A/D filter: -9.255963e+061 result=40 11:49:38 Get A/D value=-858993460 result=40 11:49:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:38 Parameters OK 11:49:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:38 Set A/D data flow result=40 11:49:38 Set A/D channel type result=40 11:49:38 Set A/D encoding result=40 11:49:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:38 Set channel filter=0.000000e+000 result=40 11:49:38 Config A/D Result=40 11:49:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:38 Get A/D filter: -9.255963e+061 result=40 11:49:38 Get A/D value=-858993460 result=40 11:49:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:38 Aux= 11:49:38 Message to Camera, serial 273558 queued 11:50:15 Received message from Master: op=PointingHead serial=273571 11:50:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:50:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:50:15 Point started: ret=0 11:50:15 point_skyscan result=0 11:50:16 Check angles 11:50:16 SkyScan query 11:50:17 SkyScan query done: ret=0 az=153.21<-10214 ze=68.145<-7457 Statuses=0009 0009 11:50:17 Msec=0 True Az=153.21 Ze=68.145 Az status=0009 Ze status=0009 11:50:17 Check angles 11:50:17 SkyScan query 11:50:17 SkyScan query done: ret=0 az=135.66<-9044 ze=89.145<-6057 Statuses=0009 0009 11:50:17 Msec=750 True Az=135.66 Ze=89.145 Az status=0009 Ze status=0009 11:50:17 Check angles 11:50:17 SkyScan query 11:50:18 SkyScan query done: ret=0 az=117.825<-7855 ze=110.475<-4635 Statuses=0009 0009 11:50:18 Msec=1500 True Az=117.825 Ze=110.475 Az status=0009 Ze status=0009 11:50:18 Check angles 11:50:18 SkyScan query 11:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=131.475<-3235 Statuses=0008 0009 11:50:19 Msec=2250 True Az=112.995 Ze=131.475 Az status=0008 Ze status=0009 11:50:19 Check angles 11:50:19 SkyScan query 11:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=152.355<-1843 Statuses=0008 0009 11:50:20 Msec=3000 True Az=112.995 Ze=152.355 Az status=0008 Ze status=0009 11:50:20 Check angles 11:50:20 SkyScan query 11:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=173.355<-443 Statuses=0008 0009 11:50:20 Msec=3750 True Az=112.995 Ze=173.355 Az status=0008 Ze status=0009 11:50:21 Check angles 11:50:21 SkyScan query 11:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 11:50:21 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 11:50:21 Message to Master queued w/err=0: serial=273571 error=0 11:50:26 Received message from Master: op=Filter serial=273572 11:50:26 Color wheel filter change from 0 to 0 11:50:26 FLIGetFilterPos err=0 currentPosition=0 11:50:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:26 Filter is already there-color wheel unchanged 11:50:26 Received message from Master: op=Shutter serial=273573 11:50:26 Shutter LASER open 11:50:26 Received message from Camera: op=State serial=273575 11:50:26 GetSingleValue result=40 Value=cccccccc 11:50:26 SkyScan query 11:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:50:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:27 Parameters OK 11:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:27 Set A/D data flow result=40 11:50:27 Set A/D channel type result=40 11:50:27 Set A/D encoding result=40 11:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:27 Set channel filter=0.000000e+000 result=40 11:50:27 Config A/D Result=40 11:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:27 Get A/D filter: -9.255963e+061 result=40 11:50:27 Get A/D value=-858993460 result=40 11:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:27 Parameters OK 11:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:27 Set A/D data flow result=40 11:50:27 Set A/D channel type result=40 11:50:27 Set A/D encoding result=40 11:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:27 Set channel filter=0.000000e+000 result=40 11:50:27 Config A/D Result=40 11:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:27 Get A/D filter: -9.255963e+061 result=40 11:50:27 Get A/D value=-858993460 result=40 11:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:27 Aux= 11:50:27 Message to Camera, serial 273575 queued 11:50:35 Received message from Master: op=Shutter serial=273585 11:50:35 Shutter LASER close 11:50:36 Received message from Master: op=PointingHead serial=273589 11:50:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:50:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:50:36 Point started: ret=0 11:50:36 point_skyscan result=0 11:50:37 Check angles 11:50:37 SkyScan query 11:50:38 SkyScan query done: ret=0 az=90.045<-6003 ze=157.38<-1508 Statuses=0009 0009 11:50:38 Msec=0 True Az=90.045 Ze=157.38 Az status=0009 Ze status=0009 11:50:38 Check angles 11:50:38 SkyScan query 11:50:38 SkyScan query done: ret=0 az=72.63<-4842 ze=136.365<-2909 Statuses=0009 0009 11:50:38 Msec=750 True Az=72.63 Ze=136.365 Az status=0009 Ze status=0009 11:50:39 Check angles 11:50:39 SkyScan query 11:50:39 SkyScan query done: ret=0 az=54.765<-3651 ze=115.035<-4331 Statuses=0009 0009 11:50:39 Msec=1500 True Az=54.765 Ze=115.035 Az status=0009 Ze status=0009 11:50:39 Check angles 11:50:39 SkyScan query 11:50:40 SkyScan query done: ret=0 az=40.98<-2732 ze=93.63<-5758 Statuses=0009 0009 11:50:40 Msec=2250 True Az=40.98 Ze=93.63 Az status=0009 Ze status=0009 11:50:40 Check angles 11:50:40 SkyScan query 11:50:41 SkyScan query done: ret=0 az=40.995<-2733 ze=72.63<-7158 Statuses=0008 0009 11:50:41 Msec=3000 True Az=40.995 Ze=72.63 Az status=0008 Ze status=0009 11:50:41 Check angles 11:50:41 SkyScan query 11:50:41 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 11:50:41 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 11:50:42 Check angles 11:50:42 SkyScan query 11:50:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:50:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:50:42 Message to Master queued w/err=0: serial=273589 error=0 11:50:47 Received message from Master: op=Filter serial=273590 11:50:47 Color wheel filter change from 0 to 0 11:50:47 FLIGetFilterPos err=0 currentPosition=0 11:50:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:47 Filter is already there-color wheel unchanged 11:50:47 Received message from Master: op=Shutter serial=273591 11:50:47 Shutter LASER close 11:50:47 Received message from Camera: op=State serial=273593 11:50:47 GetSingleValue result=40 Value=cccccccc 11:50:47 SkyScan query 11:50:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:50:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:48 Parameters OK 11:50:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:48 Set A/D data flow result=40 11:50:48 Set A/D channel type result=40 11:50:48 Set A/D encoding result=40 11:50:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:48 Set channel filter=0.000000e+000 result=40 11:50:48 Config A/D Result=40 11:50:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:48 Get A/D filter: -9.255963e+061 result=40 11:50:48 Get A/D value=-858993460 result=40 11:50:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:48 Parameters OK 11:50:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:48 Set A/D data flow result=40 11:50:48 Set A/D channel type result=40 11:50:48 Set A/D encoding result=40 11:50:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:48 Set channel filter=0.000000e+000 result=40 11:50:48 Config A/D Result=40 11:50:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:48 Get A/D filter: -9.255963e+061 result=40 11:50:48 Get A/D value=-858993460 result=40 11:50:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:48 Aux= 11:50:48 Message to Camera, serial 273593 queued 11:51:25 Received message from Master: op=PointingHead serial=273606 11:51:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:51:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:51:25 Point started: ret=0 11:51:25 point_skyscan result=0 11:51:26 Check angles 11:51:26 SkyScan query 11:51:27 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 11:51:27 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 11:51:27 Check angles 11:51:27 SkyScan query 11:51:27 SkyScan query done: ret=0 az=81.225<-5415 ze=66.495<-7567 Statuses=0009 0008 11:51:27 Msec=750 True Az=81.225 Ze=66.495 Az status=0009 Ze status=0008 11:51:27 Check angles 11:51:27 SkyScan query 11:51:28 SkyScan query done: ret=0 az=98.775<-6585 ze=66.495<-7567 Statuses=0009 0008 11:51:28 Msec=1500 True Az=98.775 Ze=66.495 Az status=0009 Ze status=0008 11:51:28 Check angles 11:51:28 SkyScan query 11:51:29 SkyScan query done: ret=0 az=116.1<-7740 ze=66.495<-7567 Statuses=0009 0008 11:51:29 Msec=2250 True Az=116.1 Ze=66.495 Az status=0009 Ze status=0008 11:51:29 Check angles 11:51:29 SkyScan query 11:51:30 SkyScan query done: ret=0 az=133.56<-8904 ze=66.495<-7567 Statuses=0009 0008 11:51:30 Msec=3000 True Az=133.56 Ze=66.495 Az status=0009 Ze status=0008 11:51:30 Check angles 11:51:30 SkyScan query 11:51:30 SkyScan query done: ret=0 az=151.17<-10078 ze=66.495<-7567 Statuses=0009 0008 11:51:30 Msec=3750 True Az=151.17 Ze=66.495 Az status=0009 Ze status=0008 11:51:30 Check angles 11:51:30 SkyScan query 11:51:31 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:51:31 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:51:31 Message to Master queued w/err=0: serial=273606 error=0 11:51:36 Received message from Master: op=Filter serial=273607 11:51:36 Color wheel filter change from 0 to 0 11:51:36 FLIGetFilterPos err=0 currentPosition=0 11:51:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:36 Filter is already there-color wheel unchanged 11:51:36 Received message from Master: op=Shutter serial=273608 11:51:36 Shutter LASER close 11:51:36 Received message from Camera: op=State serial=273610 11:51:36 GetSingleValue result=40 Value=cccccccc 11:51:36 SkyScan query 11:51:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:51:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:37 Parameters OK 11:51:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:37 Set A/D data flow result=40 11:51:37 Set A/D channel type result=40 11:51:37 Set A/D encoding result=40 11:51:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:37 Set channel filter=0.000000e+000 result=40 11:51:37 Config A/D Result=40 11:51:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:37 Get A/D filter: -9.255963e+061 result=40 11:51:37 Get A/D value=-858993460 result=40 11:51:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:37 Parameters OK 11:51:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:37 Set A/D data flow result=40 11:51:37 Set A/D channel type result=40 11:51:37 Set A/D encoding result=40 11:51:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:37 Set channel filter=0.000000e+000 result=40 11:51:37 Config A/D Result=40 11:51:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:37 Get A/D filter: -9.255963e+061 result=40 11:51:37 Get A/D value=-858993460 result=40 11:51:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:37 Aux= 11:51:37 Message to Camera, serial 273610 queued 11:52:13 Received message from Master: op=PointingHead serial=273622 11:52:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:52:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:52:13 Point started: ret=0 11:52:13 point_skyscan result=0 11:52:14 Check angles 11:52:14 SkyScan query 11:52:14 SkyScan query done: ret=0 az=135.105<-9007 ze=36.885<-9541 Statuses=0009 0009 11:52:14 Msec=0 True Az=135.105 Ze=36.885 Az status=0009 Ze status=0009 11:52:15 Check angles 11:52:15 SkyScan query 11:52:15 SkyScan query done: ret=0 az=117.645<-7843 ze=15.99<-10934 Statuses=0009 0009 11:52:15 Msec=750 True Az=117.645 Ze=15.99 Az status=0009 Ze status=0009 11:52:15 Check angles 11:52:15 SkyScan query 11:52:16 SkyScan query done: ret=0 az=100.29<-6686 ze=-4.965<-12331 Statuses=0009 0009 11:52:16 Msec=1500 True Az=100.29 Ze=-4.965 Az status=0009 Ze status=0009 11:52:16 Check angles 11:52:16 SkyScan query 11:52:17 SkyScan query done: ret=0 az=82.695<-5513 ze=-25.875<-13725 Statuses=0009 0009 11:52:17 Msec=2250 True Az=82.695 Ze=-25.875 Az status=0009 Ze status=0009 11:52:17 Check angles 11:52:17 SkyScan query 11:52:17 SkyScan query done: ret=0 az=65.19<-4346 ze=-38.565<-14571 Statuses=0009 0008 11:52:17 Msec=3000 True Az=65.19 Ze=-38.565 Az status=0009 Ze status=0008 11:52:18 Check angles 11:52:18 SkyScan query 11:52:18 SkyScan query done: ret=0 az=47.76<-3184 ze=-38.535<-14569 Statuses=0009 0008 11:52:18 Msec=3750 True Az=47.76 Ze=-38.535 Az status=0009 Ze status=0008 11:52:18 Check angles 11:52:18 SkyScan query 11:52:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:52:19 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:52:19 Message to Master queued w/err=0: serial=273622 error=0 11:52:24 Received message from Master: op=Filter serial=273623 11:52:24 Color wheel filter change from 0 to 0 11:52:24 FLIGetFilterPos err=0 currentPosition=0 11:52:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:24 Filter is already there-color wheel unchanged 11:52:24 Received message from Master: op=Shutter serial=273624 11:52:24 Shutter LASER close 11:52:24 Received message from Camera: op=State serial=273626 11:52:24 GetSingleValue result=40 Value=cccccccc 11:52:24 SkyScan query 11:52:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:52:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:25 Parameters OK 11:52:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:25 Set A/D data flow result=40 11:52:25 Set A/D channel type result=40 11:52:25 Set A/D encoding result=40 11:52:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:25 Set channel filter=0.000000e+000 result=40 11:52:25 Config A/D Result=40 11:52:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:25 Get A/D filter: -9.255963e+061 result=40 11:52:25 Get A/D value=-858993460 result=40 11:52:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:25 Parameters OK 11:52:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:25 Set A/D data flow result=40 11:52:25 Set A/D channel type result=40 11:52:25 Set A/D encoding result=40 11:52:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:25 Set channel filter=0.000000e+000 result=40 11:52:25 Config A/D Result=40 11:52:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:25 Get A/D filter: -9.255963e+061 result=40 11:52:25 Get A/D value=-858993460 result=40 11:52:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:25 Aux= 11:52:25 Message to Camera, serial 273626 queued 11:53:01 Received message from Master: op=PointingHead serial=273639 11:53:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:53:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:53:02 Point started: ret=0 11:53:02 point_skyscan result=0 11:53:03 Check angles 11:53:03 SkyScan query 11:53:03 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.16<-16544 Statuses=0009 0009 11:53:03 Msec=0 True Az=63.855 Ze=-68.16 Az status=0009 Ze status=0009 11:53:03 Check angles 11:53:03 SkyScan query 11:53:04 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.145<-17943 Statuses=0009 0009 11:53:04 Msec=750 True Az=81.33 Ze=-89.145 Az status=0009 Ze status=0009 11:53:04 Check angles 11:53:04 SkyScan query 11:53:05 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.55<-19370 Statuses=0009 0009 11:53:05 Msec=1500 True Az=99.195 Ze=-110.55 Az status=0009 Ze status=0009 11:53:05 Check angles 11:53:05 SkyScan query 11:53:05 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.445<-20763 Statuses=0009 0009 11:53:05 Msec=2250 True Az=116.595 Ze=-131.445 Az status=0009 Ze status=0009 11:53:06 Check angles 11:53:06 SkyScan query 11:53:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 11:53:06 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 11:53:06 Check angles 11:53:06 SkyScan query 11:53:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:53:07 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:53:07 Message to Master queued w/err=0: serial=273639 error=0 11:53:12 Received message from Master: op=Filter serial=273640 11:53:12 Color wheel filter change from 0 to 0 11:53:12 FLIGetFilterPos err=0 currentPosition=0 11:53:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:12 Filter is already there-color wheel unchanged 11:53:12 Received message from Master: op=Shutter serial=273641 11:53:12 Shutter LASER close 11:53:12 Received message from Camera: op=State serial=273643 11:53:12 GetSingleValue result=40 Value=cccccccc 11:53:12 SkyScan query 11:53:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:53:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:13 Parameters OK 11:53:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:13 Set A/D data flow result=40 11:53:13 Set A/D channel type result=40 11:53:13 Set A/D encoding result=40 11:53:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:13 Set channel filter=0.000000e+000 result=40 11:53:13 Config A/D Result=40 11:53:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:13 Get A/D filter: -9.255963e+061 result=40 11:53:13 Get A/D value=-858993460 result=40 11:53:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:13 Parameters OK 11:53:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:13 Set A/D data flow result=40 11:53:13 Set A/D channel type result=40 11:53:13 Set A/D encoding result=40 11:53:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:13 Set channel filter=0.000000e+000 result=40 11:53:13 Config A/D Result=40 11:53:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:13 Get A/D filter: -9.255963e+061 result=40 11:53:13 Get A/D value=-858993460 result=40 11:53:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:13 Aux= 11:53:13 Message to Camera, serial 273643 queued 11:53:50 Received message from Master: op=PointingHead serial=273656 11:53:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:53:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:53:50 Point started: ret=0 11:53:50 point_skyscan result=0 11:53:51 Check angles 11:53:51 SkyScan query 11:53:51 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 11:53:51 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 11:53:51 Check angles 11:53:51 SkyScan query 11:53:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:53:52 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:53:52 Message to Master queued w/err=0: serial=273656 error=0 11:53:57 Received message from Master: op=Filter serial=273657 11:53:57 Color wheel filter change from 0 to 0 11:53:57 FLIGetFilterPos err=0 currentPosition=0 11:53:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:57 Filter is already there-color wheel unchanged 11:53:57 Received message from Master: op=Shutter serial=273658 11:53:57 Shutter LASER open 11:53:57 Received message from Camera: op=State serial=273660 11:53:57 GetSingleValue result=40 Value=cccccccc 11:53:57 SkyScan query 11:53:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:53:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:58 Parameters OK 11:53:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:58 Set A/D data flow result=40 11:53:58 Set A/D channel type result=40 11:53:58 Set A/D encoding result=40 11:53:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:58 Set channel filter=0.000000e+000 result=40 11:53:58 Config A/D Result=40 11:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:58 Get A/D filter: -9.255963e+061 result=40 11:53:58 Get A/D value=-858993460 result=40 11:53:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:58 Parameters OK 11:53:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:58 Set A/D data flow result=40 11:53:58 Set A/D channel type result=40 11:53:58 Set A/D encoding result=40 11:53:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:58 Set channel filter=0.000000e+000 result=40 11:53:58 Config A/D Result=40 11:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:58 Get A/D filter: -9.255963e+061 result=40 11:53:58 Get A/D value=-858993460 result=40 11:53:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:58 Aux= 11:53:58 Message to Camera, serial 273660 queued 11:54:06 Received message from Master: op=Shutter serial=273670 11:54:06 Shutter LASER close 11:54:07 Received message from Master: op=PointingHead serial=273674 11:54:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:54:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:54:07 Point started: ret=0 11:54:07 point_skyscan result=0 11:54:08 Check angles 11:54:08 SkyScan query 11:54:09 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.55<-21570 Statuses=0009 0009 11:54:09 Msec=0 True Az=135.765 Ze=-143.55 Az status=0009 Ze status=0009 11:54:09 Check angles 11:54:09 SkyScan query 11:54:10 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.55<-20170 Statuses=0009 0009 11:54:10 Msec=750 True Az=153.24 Ze=-122.55 Az status=0009 Ze status=0009 11:54:10 Check angles 11:54:10 SkyScan query 11:54:10 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.685<-18779 Statuses=0009 0009 11:54:10 Msec=1500 True Az=170.79 Ze=-101.685 Az status=0009 Ze status=0009 11:54:10 Check angles 11:54:10 SkyScan query 11:54:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.61<-17374 Statuses=0008 0009 11:54:11 Msec=2250 True Az=176.01 Ze=-80.61 Az status=0008 Ze status=0009 11:54:11 Check angles 11:54:11 SkyScan query 11:54:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.73<-15982 Statuses=0008 0009 11:54:12 Msec=3000 True Az=176.01 Ze=-59.73 Az status=0008 Ze status=0009 11:54:12 Check angles 11:54:12 SkyScan query 11:54:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:54:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:54:13 Message to Master queued w/err=0: serial=273674 error=0 11:54:18 Received message from Master: op=Filter serial=273675 11:54:18 Color wheel filter change from 0 to 0 11:54:18 FLIGetFilterPos err=0 currentPosition=0 11:54:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:18 Filter is already there-color wheel unchanged 11:54:18 Received message from Master: op=Shutter serial=273676 11:54:18 Shutter LASER close 11:54:18 Received message from Camera: op=State serial=273678 11:54:18 GetSingleValue result=40 Value=cccccccc 11:54:18 SkyScan query 11:54:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:54:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:18 Parameters OK 11:54:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:18 Set A/D data flow result=40 11:54:18 Set A/D channel type result=40 11:54:18 Set A/D encoding result=40 11:54:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:18 Set channel filter=0.000000e+000 result=40 11:54:18 Config A/D Result=40 11:54:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:18 Get A/D filter: -9.255963e+061 result=40 11:54:18 Get A/D value=-858993460 result=40 11:54:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:18 Parameters OK 11:54:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:18 Set A/D data flow result=40 11:54:18 Set A/D channel type result=40 11:54:18 Set A/D encoding result=40 11:54:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:18 Set channel filter=0.000000e+000 result=40 11:54:18 Config A/D Result=40 11:54:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:18 Get A/D filter: -9.255963e+061 result=40 11:54:18 Get A/D value=-858993460 result=40 11:54:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:18 Aux= 11:54:18 Message to Camera, serial 273678 queued 11:54:55 Received message from Master: op=PointingHead serial=273691 11:54:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:54:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:54:56 Point started: ret=0 11:54:56 point_skyscan result=0 11:54:56 Check angles 11:54:56 SkyScan query 11:54:57 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.9<-13460 Statuses=0009 0009 11:54:57 Msec=0 True Az=153.12 Ze=-21.9 Az status=0009 Ze status=0009 11:54:57 Check angles 11:54:57 SkyScan query 11:54:58 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.855<-12057 Statuses=0009 0009 11:54:58 Msec=750 True Az=135.675 Ze=-0.855 Az status=0009 Ze status=0009 11:54:58 Check angles 11:54:58 SkyScan query 11:54:58 SkyScan query done: ret=0 az=118.125<-7875 ze=20.025<-10665 Statuses=0009 0009 11:54:58 Msec=1500 True Az=118.125 Ze=20.025 Az status=0009 Ze status=0009 11:54:59 Check angles 11:54:59 SkyScan query 11:54:59 SkyScan query done: ret=0 az=100.71<-6714 ze=41.07<-9262 Statuses=0009 0009 11:54:59 Msec=2250 True Az=100.71 Ze=41.07 Az status=0009 Ze status=0009 11:54:59 Check angles 11:54:59 SkyScan query 11:55:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 11:55:00 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 11:55:00 Check angles 11:55:00 SkyScan query 11:55:01 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 11:55:01 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 11:55:01 Message to Master queued w/err=0: serial=273691 error=0 11:55:06 Received message from Master: op=Filter serial=273692 11:55:06 Color wheel filter change from 0 to 0 11:55:06 FLIGetFilterPos err=0 currentPosition=0 11:55:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:06 Filter is already there-color wheel unchanged 11:55:06 Received message from Master: op=Shutter serial=273693 11:55:06 Shutter LASER close 11:55:06 Received message from Camera: op=State serial=273695 11:55:06 GetSingleValue result=40 Value=cccccccc 11:55:06 SkyScan query 11:55:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:55:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:06 Parameters OK 11:55:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:06 Set A/D data flow result=40 11:55:06 Set A/D channel type result=40 11:55:06 Set A/D encoding result=40 11:55:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:06 Set channel filter=0.000000e+000 result=40 11:55:06 Config A/D Result=40 11:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:06 Get A/D filter: -9.255963e+061 result=40 11:55:06 Get A/D value=-858993460 result=40 11:55:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:06 Parameters OK 11:55:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:06 Set A/D data flow result=40 11:55:06 Set A/D channel type result=40 11:55:06 Set A/D encoding result=40 11:55:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:06 Set channel filter=0.000000e+000 result=40 11:55:06 Config A/D Result=40 11:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-19 11:55:06] 11:55:06 Get A/D filter: -9.255963e+061 result=40 11:55:07 Get A/D value=-858993460 result=40 11:55:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:07 Aux= 11:55:07 Message to Camera, serial 273695 queued 11:55:43 Received message from Master: op=PointingHead serial=273708 11:55:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:55:43 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:55:44 Point started: ret=0 11:55:44 point_skyscan result=0 11:55:44 Check angles 11:55:44 SkyScan query 11:55:45 SkyScan query done: ret=0 az=108.705<-7247 ze=38.49<-9434 Statuses=0009 0008 11:55:45 Msec=0 True Az=108.705 Ze=38.49 Az status=0009 Ze status=0008 11:55:45 Check angles 11:55:45 SkyScan query 11:55:46 SkyScan query done: ret=0 az=126.195<-8413 ze=38.505<-9433 Statuses=0009 0008 11:55:46 Msec=750 True Az=126.195 Ze=38.505 Az status=0009 Ze status=0008 11:55:46 Check angles 11:55:46 SkyScan query 11:55:47 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 11:55:47 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 11:55:47 Check angles 11:55:47 SkyScan query 11:55:47 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 11:55:47 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 11:55:47 Check angles 11:55:47 SkyScan query 11:55:48 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:55:48 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:55:48 Check angles 11:55:48 SkyScan query 11:55:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:55:49 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:55:49 Message to Master queued w/err=0: serial=273708 error=0 [UTC 2018-12-19 11:55:52] 11:55:54 Received message from Master: op=Filter serial=273709 11:55:54 Color wheel filter change from 0 to 0 11:55:54 FLIGetFilterPos err=0 currentPosition=0 11:55:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:54 Filter is already there-color wheel unchanged 11:55:54 Received message from Master: op=Shutter serial=273710 11:55:54 Shutter LASER close 11:55:54 Received message from Camera: op=State serial=273712 11:55:54 GetSingleValue result=40 Value=cccccccc 11:55:54 SkyScan query 11:55:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:55:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:55 Parameters OK 11:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:55 Set A/D data flow result=40 11:55:55 Set A/D channel type result=40 11:55:55 Set A/D encoding result=40 11:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:55 Set channel filter=0.000000e+000 result=40 11:55:55 Config A/D Result=40 11:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:55 Get A/D filter: -9.255963e+061 result=40 11:55:55 Get A/D value=-858993460 result=40 11:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:55 Parameters OK 11:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:55 Set A/D data flow result=40 11:55:55 Set A/D channel type result=40 11:55:55 Set A/D encoding result=40 11:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:55 Set channel filter=0.000000e+000 result=40 11:55:55 Config A/D Result=40 11:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:55 Get A/D filter: -9.255963e+061 result=40 11:55:55 Get A/D value=-858993460 result=40 11:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:55 Aux= 11:55:55 Message to Camera, serial 273712 queued 11:56:32 Received message from Master: op=PointingHead serial=273725 11:56:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:56:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:56:32 Point started: ret=0 11:56:32 point_skyscan result=0 11:56:33 Check angles 11:56:33 SkyScan query 11:56:33 SkyScan query done: ret=0 az=152.73<-10182 ze=68.505<-7433 Statuses=0009 0009 11:56:33 Msec=0 True Az=152.73 Ze=68.505 Az status=0009 Ze status=0009 11:56:33 Check angles 11:56:33 SkyScan query 11:56:34 SkyScan query done: ret=0 az=135.255<-9017 ze=89.535<-6031 Statuses=0009 0009 11:56:34 Msec=750 True Az=135.255 Ze=89.535 Az status=0009 Ze status=0009 11:56:34 Check angles 11:56:34 SkyScan query 11:56:35 SkyScan query done: ret=0 az=117.66<-7844 ze=110.445<-4637 Statuses=0009 0009 11:56:35 Msec=1500 True Az=117.66 Ze=110.445 Az status=0009 Ze status=0009 11:56:35 Check angles 11:56:35 SkyScan query 11:56:35 SkyScan query done: ret=0 az=112.995<-7533 ze=131.43<-3238 Statuses=0008 0009 11:56:35 Msec=2250 True Az=112.995 Ze=131.43 Az status=0008 Ze status=0009 11:56:36 Check angles 11:56:36 SkyScan query 11:56:36 SkyScan query done: ret=0 az=112.995<-7533 ze=152.31<-1846 Statuses=0008 0009 11:56:36 Msec=3000 True Az=112.995 Ze=152.31 Az status=0008 Ze status=0009 11:56:36 Check angles 11:56:36 SkyScan query 11:56:37 SkyScan query done: ret=0 az=112.995<-7533 ze=173.31<-446 Statuses=0008 0009 11:56:37 Msec=3750 True Az=112.995 Ze=173.31 Az status=0008 Ze status=0009 11:56:37 Check angles 11:56:37 SkyScan query 11:56:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 11:56:38 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 11:56:38 Message to Master queued w/err=0: serial=273725 error=0 11:56:43 Received message from Master: op=Filter serial=273726 11:56:43 Color wheel filter change from 0 to 0 11:56:43 FLIGetFilterPos err=0 currentPosition=0 11:56:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:43 Filter is already there-color wheel unchanged 11:56:43 Received message from Master: op=Shutter serial=273727 11:56:43 Shutter LASER open 11:56:43 Received message from Camera: op=State serial=273729 11:56:43 GetSingleValue result=40 Value=cccccccc 11:56:43 SkyScan query 11:56:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:56:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:44 Parameters OK 11:56:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:44 Set A/D data flow result=40 11:56:44 Set A/D channel type result=40 11:56:44 Set A/D encoding result=40 11:56:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:44 Set channel filter=0.000000e+000 result=40 11:56:44 Config A/D Result=40 11:56:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:44 Get A/D filter: -9.255963e+061 result=40 11:56:44 Get A/D value=-858993460 result=40 11:56:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:44 Parameters OK 11:56:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:44 Set A/D data flow result=40 11:56:44 Set A/D channel type result=40 11:56:44 Set A/D encoding result=40 11:56:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:44 Set channel filter=0.000000e+000 result=40 11:56:44 Config A/D Result=40 11:56:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:44 Get A/D filter: -9.255963e+061 result=40 11:56:44 Get A/D value=-858993460 result=40 11:56:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:44 Aux= 11:56:44 Message to Camera, serial 273729 queued 11:56:52 Received message from Master: op=Shutter serial=273739 11:56:52 Shutter LASER close 11:56:53 Received message from Master: op=PointingHead serial=273743 11:56:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:56:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:56:53 Point started: ret=0 11:56:53 point_skyscan result=0 11:56:54 Check angles 11:56:54 SkyScan query 11:56:54 SkyScan query done: ret=0 az=89.655<-5977 ze=156.855<-1543 Statuses=0009 0009 11:56:54 Msec=0 True Az=89.655 Ze=156.855 Az status=0009 Ze status=0009 11:56:54 Check angles 11:56:54 SkyScan query 11:56:55 SkyScan query done: ret=0 az=72.135<-4809 ze=135.885<-2941 Statuses=0009 0009 11:56:55 Msec=750 True Az=72.135 Ze=135.885 Az status=0009 Ze status=0009 11:56:55 Check angles 11:56:55 SkyScan query 11:56:56 SkyScan query done: ret=0 az=54.36<-3624 ze=114.42<-4372 Statuses=0009 0009 11:56:56 Msec=1500 True Az=54.36 Ze=114.42 Az status=0009 Ze status=0009 11:56:56 Check angles 11:56:56 SkyScan query 11:56:56 SkyScan query done: ret=0 az=40.98<-2732 ze=93.54<-5764 Statuses=0009 0009 11:56:56 Msec=2250 True Az=40.98 Ze=93.54 Az status=0009 Ze status=0009 11:56:57 Check angles 11:56:57 SkyScan query 11:56:57 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 11:56:57 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 11:56:57 Check angles 11:56:57 SkyScan query 11:56:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 11:56:58 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 11:56:58 Check angles 11:56:58 SkyScan query 11:56:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:56:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:56:59 Message to Master queued w/err=0: serial=273743 error=0 11:57:04 Received message from Master: op=Filter serial=273744 11:57:04 Color wheel filter change from 0 to 0 11:57:04 FLIGetFilterPos err=0 currentPosition=0 11:57:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:04 Filter is already there-color wheel unchanged 11:57:04 Received message from Master: op=Shutter serial=273745 11:57:04 Shutter LASER close 11:57:04 Received message from Camera: op=State serial=273747 11:57:04 GetSingleValue result=40 Value=cccccccc 11:57:04 SkyScan query 11:57:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:57:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:05 Parameters OK 11:57:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:05 Set A/D data flow result=40 11:57:05 Set A/D channel type result=40 11:57:05 Set A/D encoding result=40 11:57:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:05 Set channel filter=0.000000e+000 result=40 11:57:05 Config A/D Result=40 11:57:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:05 Get A/D filter: -9.255963e+061 result=40 11:57:05 Get A/D value=-858993460 result=40 11:57:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:05 Parameters OK 11:57:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:05 Set A/D data flow result=40 11:57:05 Set A/D channel type result=40 11:57:05 Set A/D encoding result=40 11:57:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:05 Set channel filter=0.000000e+000 result=40 11:57:05 Config A/D Result=40 11:57:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:05 Get A/D filter: -9.255963e+061 result=40 11:57:05 Get A/D value=-858993460 result=40 11:57:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:05 Aux= 11:57:05 Message to Camera, serial 273747 queued 11:57:41 Received message from Master: op=PointingHead serial=273760 11:57:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:57:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:57:42 Point started: ret=0 11:57:42 point_skyscan result=0 11:57:43 Check angles 11:57:43 SkyScan query 11:57:43 SkyScan query done: ret=0 az=64.035<-4269 ze=66.555<-7563 Statuses=0009 0008 11:57:43 Msec=0 True Az=64.035 Ze=66.555 Az status=0009 Ze status=0008 11:57:43 Check angles 11:57:43 SkyScan query 11:57:44 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 11:57:44 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 11:57:44 Check angles 11:57:44 SkyScan query 11:57:45 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 11:57:45 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 11:57:45 Check angles 11:57:45 SkyScan query 11:57:45 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 11:57:45 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 11:57:46 Check angles 11:57:46 SkyScan query 11:57:46 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 11:57:46 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 11:57:46 Check angles 11:57:46 SkyScan query 11:57:47 SkyScan query done: ret=0 az=152.175<-10145 ze=66.495<-7567 Statuses=0009 0008 11:57:47 Msec=3750 True Az=152.175 Ze=66.495 Az status=0009 Ze status=0008 11:57:47 Check angles 11:57:47 SkyScan query 11:57:48 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:57:48 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:57:48 Message to Master queued w/err=0: serial=273760 error=0 11:57:53 Received message from Master: op=Filter serial=273761 11:57:53 Color wheel filter change from 0 to 0 11:57:53 FLIGetFilterPos err=0 currentPosition=0 11:57:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:53 Filter is already there-color wheel unchanged 11:57:53 Received message from Master: op=Shutter serial=273762 11:57:53 Shutter LASER close 11:57:53 Received message from Camera: op=State serial=273764 11:57:53 GetSingleValue result=40 Value=cccccccc 11:57:53 SkyScan query 11:57:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:57:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:53 Parameters OK 11:57:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:53 Set A/D data flow result=40 11:57:53 Set A/D channel type result=40 11:57:53 Set A/D encoding result=40 11:57:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:53 Set channel filter=0.000000e+000 result=40 11:57:53 Config A/D Result=40 11:57:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:53 Get A/D filter: -9.255963e+061 result=40 11:57:53 Get A/D value=-858993460 result=40 11:57:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:53 Parameters OK 11:57:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:53 Set A/D data flow result=40 11:57:53 Set A/D channel type result=40 11:57:53 Set A/D encoding result=40 11:57:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:53 Set channel filter=0.000000e+000 result=40 11:57:53 Config A/D Result=40 11:57:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:53 Get A/D filter: -9.255963e+061 result=40 11:57:53 Get A/D value=-858993460 result=40 11:57:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:53 Aux= 11:57:53 Message to Camera, serial 273764 queued 11:58:29 Received message from Master: op=PointingHead serial=273776 11:58:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:58:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:58:30 Point started: ret=0 11:58:30 point_skyscan result=0 11:58:31 Check angles 11:58:31 SkyScan query 11:58:31 SkyScan query done: ret=0 az=134.58<-8972 ze=36.39<-9574 Statuses=0009 0009 11:58:31 Msec=0 True Az=134.58 Ze=36.39 Az status=0009 Ze status=0009 11:58:31 Check angles 11:58:31 SkyScan query 11:58:32 SkyScan query done: ret=0 az=117.09<-7806 ze=15.465<-10969 Statuses=0009 0009 11:58:32 Msec=750 True Az=117.09 Ze=15.465 Az status=0009 Ze status=0009 11:58:32 Check angles 11:58:32 SkyScan query 11:58:33 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.52<-12368 Statuses=0009 0009 11:58:33 Msec=1500 True Az=99.84 Ze=-5.52 Az status=0009 Ze status=0009 11:58:33 Check angles 11:58:33 SkyScan query 11:58:33 SkyScan query done: ret=0 az=82.35<-5490 ze=-26.505<-13767 Statuses=0009 0009 11:58:33 Msec=2250 True Az=82.35 Ze=-26.505 Az status=0009 Ze status=0009 11:58:34 Check angles 11:58:34 SkyScan query 11:58:34 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.565<-14571 Statuses=0009 0008 11:58:34 Msec=3000 True Az=64.77 Ze=-38.565 Az status=0009 Ze status=0008 11:58:34 Check angles 11:58:34 SkyScan query 11:58:35 SkyScan query done: ret=0 az=46.965<-3131 ze=-38.535<-14569 Statuses=0009 0008 11:58:35 Msec=3750 True Az=46.965 Ze=-38.535 Az status=0009 Ze status=0008 11:58:35 Check angles 11:58:35 SkyScan query 11:58:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:58:36 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:58:36 Message to Master queued w/err=0: serial=273776 error=0 11:58:41 Received message from Master: op=Filter serial=273777 11:58:41 Color wheel filter change from 0 to 0 11:58:41 FLIGetFilterPos err=0 currentPosition=0 11:58:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:41 Filter is already there-color wheel unchanged 11:58:41 Received message from Master: op=Shutter serial=273778 11:58:41 Shutter LASER close 11:58:41 Received message from Camera: op=State serial=273780 11:58:41 GetSingleValue result=40 Value=cccccccc 11:58:41 SkyScan query 11:58:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:58:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:41 Parameters OK 11:58:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:41 Set A/D data flow result=40 11:58:41 Set A/D channel type result=40 11:58:41 Set A/D encoding result=40 11:58:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:41 Set channel filter=0.000000e+000 result=40 11:58:41 Config A/D Result=40 11:58:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:41 Get A/D filter: -9.255963e+061 result=40 11:58:41 Get A/D value=-858993460 result=40 11:58:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:41 Parameters OK 11:58:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:41 Set A/D data flow result=40 11:58:41 Set A/D channel type result=40 11:58:41 Set A/D encoding result=40 11:58:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:41 Set channel filter=0.000000e+000 result=40 11:58:41 Config A/D Result=40 11:58:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:41 Get A/D filter: -9.255963e+061 result=40 11:58:41 Get A/D value=-858993460 result=40 11:58:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:41 Aux= 11:58:41 Message to Camera, serial 273780 queued 11:59:18 Received message from Master: op=PointingHead serial=273793 11:59:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:59:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:59:19 Point started: ret=0 11:59:19 point_skyscan result=0 11:59:19 Check angles 11:59:19 SkyScan query 11:59:20 SkyScan query done: ret=0 az=64.38<-4292 ze=-68.775<-16585 Statuses=0009 0009 11:59:20 Msec=0 True Az=64.38 Ze=-68.775 Az status=0009 Ze status=0009 11:59:20 Check angles 11:59:20 SkyScan query 11:59:21 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.7<-17980 Statuses=0009 0009 11:59:21 Msec=750 True Az=81.78 Ze=-89.7 Az status=0009 Ze status=0009 11:59:21 Check angles 11:59:21 SkyScan query 11:59:21 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.075<-19405 Statuses=0009 0009 11:59:21 Msec=1500 True Az=99.705 Ze=-111.075 Az status=0009 Ze status=0009 11:59:22 Check angles 11:59:22 SkyScan query 11:59:22 SkyScan query done: ret=0 az=117.165<-7811 ze=-132.015<-20801 Statuses=0009 0009 11:59:22 Msec=2250 True Az=117.165 Ze=-132.015 Az status=0009 Ze status=0009 11:59:22 Check angles 11:59:22 SkyScan query 11:59:23 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 11:59:23 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 11:59:23 Check angles 11:59:23 SkyScan query 11:59:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:59:24 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:59:24 Message to Master queued w/err=0: serial=273793 error=0 11:59:29 Received message from Master: op=Filter serial=273794 11:59:29 Color wheel filter change from 0 to 0 11:59:29 FLIGetFilterPos err=0 currentPosition=0 11:59:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:29 Filter is already there-color wheel unchanged 11:59:29 Received message from Master: op=Shutter serial=273795 11:59:29 Shutter LASER close 11:59:29 Received message from Camera: op=State serial=273797 11:59:29 GetSingleValue result=40 Value=cccccccc 11:59:29 SkyScan query 11:59:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:59:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:29 Parameters OK 11:59:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:29 Set A/D data flow result=40 11:59:29 Set A/D channel type result=40 11:59:29 Set A/D encoding result=40 11:59:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:29 Set channel filter=0.000000e+000 result=40 11:59:29 Config A/D Result=40 11:59:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:29 Get A/D filter: -9.255963e+061 result=40 11:59:29 Get A/D value=-858993460 result=40 11:59:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:29 Parameters OK 11:59:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:29 Set A/D data flow result=40 11:59:29 Set A/D channel type result=40 11:59:29 Set A/D encoding result=40 11:59:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:29 Set channel filter=0.000000e+000 result=40 11:59:29 Config A/D Result=40 11:59:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:29 Get A/D filter: -9.255963e+061 result=40 11:59:29 Get A/D value=-858993460 result=40 11:59:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:29 Aux= 11:59:29 Message to Camera, serial 273797 queued 12:00:06 Received message from Master: op=PointingHead serial=273810 12:00:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:00:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:00:07 Point started: ret=0 12:00:07 point_skyscan result=0 12:00:07 Check angles 12:00:07 SkyScan query 12:00:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.88<-23392 Statuses=0009 0009 12:00:08 Msec=0 True Az=113.01 Ze=-170.88 Az status=0009 Ze status=0009 12:00:08 Check angles 12:00:08 SkyScan query 12:00:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:00:09 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:00:09 Message to Master queued w/err=0: serial=273810 error=0 12:00:14 Received message from Master: op=Filter serial=273811 12:00:14 Color wheel filter change from 0 to 0 12:00:14 FLIGetFilterPos err=0 currentPosition=0 12:00:14 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:14 Filter is already there-color wheel unchanged 12:00:14 Received message from Master: op=Shutter serial=273812 12:00:14 Shutter LASER open 12:00:14 Received message from Camera: op=State serial=273814 12:00:14 GetSingleValue result=40 Value=cccccccc 12:00:14 SkyScan query 12:00:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:00:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:15 Parameters OK 12:00:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:15 Set A/D data flow result=40 12:00:15 Set A/D channel type result=40 12:00:15 Set A/D encoding result=40 12:00:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:15 Set channel filter=0.000000e+000 result=40 12:00:15 Config A/D Result=40 12:00:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:15 Get A/D filter: -9.255963e+061 result=40 12:00:15 Get A/D value=-858993460 result=40 12:00:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:15 Parameters OK 12:00:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:15 Set A/D data flow result=40 12:00:15 Set A/D channel type result=40 12:00:15 Set A/D encoding result=40 12:00:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:15 Set channel filter=0.000000e+000 result=40 12:00:15 Config A/D Result=40 12:00:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:15 Get A/D filter: -9.255963e+061 result=40 12:00:15 Get A/D value=-858993460 result=40 12:00:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:15 Aux= 12:00:15 Message to Camera, serial 273814 queued 12:00:23 Received message from Master: op=Shutter serial=273824 12:00:23 Shutter LASER close 12:00:24 Received message from Master: op=PointingHead serial=273828 12:00:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:00:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:00:24 Point started: ret=0 12:00:24 point_skyscan result=0 12:00:25 Check angles 12:00:25 SkyScan query 12:00:25 SkyScan query done: ret=0 az=136.32<-9088 ze=-143.085<-21539 Statuses=0009 0009 12:00:25 Msec=0 True Az=136.32 Ze=-143.085 Az status=0009 Ze status=0009 12:00:26 Check angles 12:00:26 SkyScan query 12:00:26 SkyScan query done: ret=0 az=153.705<-10247 ze=-122.1<-20140 Statuses=0009 0009 12:00:26 Msec=750 True Az=153.705 Ze=-122.1 Az status=0009 Ze status=0009 12:00:26 Check angles 12:00:26 SkyScan query 12:00:27 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.19<-18746 Statuses=0009 0009 12:00:27 Msec=1500 True Az=171.195 Ze=-101.19 Az status=0009 Ze status=0009 12:00:27 Check angles 12:00:27 SkyScan query 12:00:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 12:00:28 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 12:00:28 Check angles 12:00:28 SkyScan query 12:00:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.25<-15950 Statuses=0008 0009 12:00:28 Msec=3000 True Az=175.995 Ze=-59.25 Az status=0008 Ze status=0009 12:00:29 Check angles 12:00:29 SkyScan query 12:00:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:00:29 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:00:29 Message to Master queued w/err=0: serial=273828 error=0 12:00:34 Received message from Master: op=Filter serial=273829 12:00:34 Color wheel filter change from 0 to 0 12:00:34 FLIGetFilterPos err=0 currentPosition=0 12:00:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:34 Filter is already there-color wheel unchanged 12:00:34 Received message from Master: op=Shutter serial=273830 12:00:34 Shutter LASER close 12:00:34 Received message from Camera: op=State serial=273832 12:00:34 GetSingleValue result=40 Value=cccccccc 12:00:34 SkyScan query 12:00:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:00:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:35 Parameters OK 12:00:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:35 Set A/D data flow result=40 12:00:35 Set A/D channel type result=40 12:00:35 Set A/D encoding result=40 12:00:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:35 Set channel filter=0.000000e+000 result=40 12:00:35 Config A/D Result=40 12:00:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:35 Get A/D filter: -9.255963e+061 result=40 12:00:35 Get A/D value=-858993460 result=40 12:00:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:35 Parameters OK 12:00:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:35 Set A/D data flow result=40 12:00:35 Set A/D channel type result=40 12:00:35 Set A/D encoding result=40 12:00:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:35 Set channel filter=0.000000e+000 result=40 12:00:35 Config A/D Result=40 12:00:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:35 Get A/D filter: -9.255963e+061 result=40 12:00:35 Get A/D value=-858993460 result=40 12:00:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:35 Aux= 12:00:35 Message to Camera, serial 273832 queued 12:01:12 Received message from Master: op=PointingHead serial=273845 12:01:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:01:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:01:12 Point started: ret=0 12:01:12 point_skyscan result=0 12:01:13 Check angles 12:01:13 SkyScan query 12:01:14 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.975<-13465 Statuses=0009 0009 12:01:14 Msec=0 True Az=153.18 Ze=-21.975 Az status=0009 Ze status=0009 12:01:14 Check angles 12:01:14 SkyScan query 12:01:14 SkyScan query done: ret=0 az=135.285<-9019 ze=-0.51<-12034 Statuses=0009 0009 12:01:14 Msec=750 True Az=135.285 Ze=-0.51 Az status=0009 Ze status=0009 12:01:14 Check angles 12:01:14 SkyScan query 12:01:15 SkyScan query done: ret=0 az=117.84<-7856 ze=20.415<-10639 Statuses=0009 0009 12:01:15 Msec=1500 True Az=117.84 Ze=20.415 Az status=0009 Ze status=0009 12:01:15 Check angles 12:01:15 SkyScan query 12:01:16 SkyScan query done: ret=0 az=100.455<-6697 ze=41.415<-9239 Statuses=0009 0009 12:01:16 Msec=2250 True Az=100.455 Ze=41.415 Az status=0009 Ze status=0009 12:01:16 Check angles 12:01:16 SkyScan query 12:01:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 12:01:17 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 12:01:17 Check angles 12:01:17 SkyScan query 12:01:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:01:17 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 12:01:17 Message to Master queued w/err=0: serial=273845 error=0 12:01:22 Received message from Master: op=Filter serial=273846 12:01:22 Color wheel filter change from 0 to 0 12:01:22 FLIGetFilterPos err=0 currentPosition=0 12:01:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:22 Filter is already there-color wheel unchanged 12:01:23 Received message from Master: op=Shutter serial=273847 12:01:23 Shutter LASER close 12:01:23 Received message from Camera: op=State serial=273849 12:01:23 GetSingleValue result=40 Value=cccccccc 12:01:23 SkyScan query 12:01:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:01:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:23 Parameters OK 12:01:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:23 Set A/D data flow result=40 12:01:23 Set A/D channel type result=40 12:01:23 Set A/D encoding result=40 12:01:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:23 Set channel filter=0.000000e+000 result=40 12:01:23 Config A/D Result=40 12:01:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:23 Get A/D filter: -9.255963e+061 result=40 12:01:23 Get A/D value=-858993460 result=40 12:01:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:23 Parameters OK 12:01:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:23 Set A/D data flow result=40 12:01:23 Set A/D channel type result=40 12:01:23 Set A/D encoding result=40 12:01:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:23 Set channel filter=0.000000e+000 result=40 12:01:23 Config A/D Result=40 12:01:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:23 Get A/D filter: -9.255963e+061 result=40 12:01:23 Get A/D value=-858993460 result=40 12:01:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:23 Aux= 12:01:23 Message to Camera, serial 273849 queued 12:02:00 Received message from Master: op=PointingHead serial=273862 12:02:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:02:00 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:02:00 Point started: ret=0 12:02:00 point_skyscan result=0 12:02:01 Check angles 12:02:01 SkyScan query 12:02:02 SkyScan query done: ret=0 az=109.155<-7277 ze=38.475<-9435 Statuses=0009 0008 12:02:02 Msec=0 True Az=109.155 Ze=38.475 Az status=0009 Ze status=0008 12:02:02 Check angles 12:02:02 SkyScan query 12:02:02 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 12:02:02 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 12:02:03 Check angles 12:02:03 SkyScan query 12:02:03 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 12:02:03 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 12:02:03 Check angles 12:02:03 SkyScan query 12:02:04 SkyScan query done: ret=0 az=161.505<-10767 ze=38.505<-9433 Statuses=0009 0008 12:02:04 Msec=2250 True Az=161.505 Ze=38.505 Az status=0009 Ze status=0008 12:02:04 Check angles 12:02:04 SkyScan query 12:02:05 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:02:05 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:02:05 Check angles 12:02:05 SkyScan query 12:02:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:02:05 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:02:05 Message to Master queued w/err=0: serial=273862 error=0 12:02:10 Received message from Master: op=Filter serial=273863 12:02:10 Color wheel filter change from 0 to 0 12:02:10 FLIGetFilterPos err=0 currentPosition=0 12:02:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:10 Filter is already there-color wheel unchanged 12:02:11 Received message from Master: op=Shutter serial=273864 12:02:11 Shutter LASER close 12:02:11 Received message from Camera: op=State serial=273866 12:02:11 GetSingleValue result=40 Value=cccccccc 12:02:11 SkyScan query 12:02:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:02:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:11 Parameters OK 12:02:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:11 Set A/D data flow result=40 12:02:11 Set A/D channel type result=40 12:02:11 Set A/D encoding result=40 12:02:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:11 Set channel filter=0.000000e+000 result=40 12:02:11 Config A/D Result=40 12:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:11 Get A/D filter: -9.255963e+061 result=40 12:02:11 Get A/D value=-858993460 result=40 12:02:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:11 Parameters OK 12:02:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:11 Set A/D data flow result=40 12:02:11 Set A/D channel type result=40 12:02:11 Set A/D encoding result=40 12:02:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:11 Set channel filter=0.000000e+000 result=40 12:02:11 Config A/D Result=40 12:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:11 Get A/D filter: -9.255963e+061 result=40 12:02:11 Get A/D value=-858993460 result=40 12:02:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:11 Aux= 12:02:11 Message to Camera, serial 273866 queued 12:02:48 Received message from Master: op=PointingHead serial=273879 12:02:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:02:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:02:49 Point started: ret=0 12:02:49 point_skyscan result=0 12:02:49 Check angles 12:02:49 SkyScan query 12:02:50 SkyScan query done: ret=0 az=153.3<-10220 ze=68.07<-7462 Statuses=0009 0009 12:02:50 Msec=0 True Az=153.3 Ze=68.07 Az status=0009 Ze status=0009 12:02:50 Check angles 12:02:50 SkyScan query 12:02:51 SkyScan query done: ret=0 az=135.855<-9057 ze=89.04<-6064 Statuses=0009 0009 12:02:51 Msec=750 True Az=135.855 Ze=89.04 Az status=0009 Ze status=0009 12:02:51 Check angles 12:02:51 SkyScan query 12:02:51 SkyScan query done: ret=0 az=118.32<-7888 ze=109.995<-4667 Statuses=0009 0009 12:02:51 Msec=1500 True Az=118.32 Ze=109.995 Az status=0009 Ze status=0009 12:02:52 Check angles 12:02:52 SkyScan query 12:02:52 SkyScan query done: ret=0 az=112.995<-7533 ze=130.92<-3272 Statuses=0008 0009 12:02:52 Msec=2250 True Az=112.995 Ze=130.92 Az status=0008 Ze status=0009 12:02:52 Check angles 12:02:52 SkyScan query 12:02:53 SkyScan query done: ret=0 az=112.995<-7533 ze=151.875<-1875 Statuses=0008 0009 12:02:53 Msec=3000 True Az=112.995 Ze=151.875 Az status=0008 Ze status=0009 12:02:53 Check angles 12:02:53 SkyScan query 12:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=172.815<-479 Statuses=0008 0009 12:02:54 Msec=3750 True Az=112.995 Ze=172.815 Az status=0008 Ze status=0009 12:02:54 Check angles 12:02:54 SkyScan query 12:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0009 12:02:54 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0009 12:02:55 Check angles 12:02:55 SkyScan query 12:02:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.95<-23530 Statuses=0008 0008 12:02:55 Msec=5250 True Az=112.995 Ze=-172.95 Az status=0008 Ze status=0008 12:02:55 Message to Master queued w/err=0: serial=273879 error=0 12:03:00 Received message from Master: op=Filter serial=273880 12:03:00 Color wheel filter change from 0 to 0 12:03:00 FLIGetFilterPos err=0 currentPosition=0 12:03:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:00 Filter is already there-color wheel unchanged 12:03:00 Received message from Master: op=Shutter serial=273881 12:03:00 Shutter LASER open 12:03:00 Received message from Camera: op=State serial=273883 12:03:00 GetSingleValue result=40 Value=cccccccc 12:03:00 SkyScan query 12:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:03:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:01 Parameters OK 12:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:01 Set A/D data flow result=40 12:03:01 Set A/D channel type result=40 12:03:01 Set A/D encoding result=40 12:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:01 Set channel filter=0.000000e+000 result=40 12:03:01 Config A/D Result=40 12:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:01 Get A/D filter: -9.255963e+061 result=40 12:03:01 Get A/D value=-858993460 result=40 12:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:01 Parameters OK 12:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:01 Set A/D data flow result=40 12:03:01 Set A/D channel type result=40 12:03:01 Set A/D encoding result=40 12:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:01 Set channel filter=0.000000e+000 result=40 12:03:01 Config A/D Result=40 12:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:01 Get A/D filter: -9.255963e+061 result=40 12:03:01 Get A/D value=-858993460 result=40 12:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:01 Aux= 12:03:01 Message to Camera, serial 273883 queued 12:03:09 Received message from Master: op=Shutter serial=273893 12:03:09 Shutter LASER close 12:03:10 Received message from Master: op=PointingHead serial=273897 12:03:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:03:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:03:10 Point started: ret=0 12:03:10 point_skyscan result=0 12:03:11 Check angles 12:03:11 SkyScan query 12:03:12 SkyScan query done: ret=0 az=89.835<-5989 ze=157.035<-1531 Statuses=0009 0009 12:03:12 Msec=0 True Az=89.835 Ze=157.035 Az status=0009 Ze status=0009 12:03:12 Check angles 12:03:12 SkyScan query 12:03:12 SkyScan query done: ret=0 az=71.925<-4795 ze=135.645<-2957 Statuses=0009 0009 12:03:12 Msec=750 True Az=71.925 Ze=135.645 Az status=0009 Ze status=0009 12:03:13 Check angles 12:03:13 SkyScan query 12:03:13 SkyScan query done: ret=0 az=54.54<-3636 ze=114.615<-4359 Statuses=0009 0009 12:03:13 Msec=1500 True Az=54.54 Ze=114.615 Az status=0009 Ze status=0009 12:03:13 Check angles 12:03:13 SkyScan query 12:03:14 SkyScan query done: ret=0 az=40.98<-2732 ze=93.705<-5753 Statuses=0009 0009 12:03:14 Msec=2250 True Az=40.98 Ze=93.705 Az status=0009 Ze status=0009 12:03:14 Check angles 12:03:14 SkyScan query 12:03:15 SkyScan query done: ret=0 az=40.995<-2733 ze=72.285<-7181 Statuses=0008 0009 12:03:15 Msec=3000 True Az=40.995 Ze=72.285 Az status=0008 Ze status=0009 12:03:15 Check angles 12:03:15 SkyScan query 12:03:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.185<-8521 Statuses=0008 0009 12:03:15 Msec=3750 True Az=40.995 Ze=52.185 Az status=0008 Ze status=0009 12:03:16 Check angles 12:03:16 SkyScan query 12:03:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:03:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:03:16 Message to Master queued w/err=0: serial=273897 error=0 12:03:21 Received message from Master: op=Filter serial=273898 12:03:21 Color wheel filter change from 0 to 0 12:03:21 FLIGetFilterPos err=0 currentPosition=0 12:03:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:21 Filter is already there-color wheel unchanged 12:03:21 Received message from Master: op=Shutter serial=273899 12:03:21 Shutter LASER close 12:03:21 Received message from Camera: op=State serial=273901 12:03:21 GetSingleValue result=40 Value=cccccccc 12:03:21 SkyScan query 12:03:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:03:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:22 Parameters OK 12:03:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:22 Set A/D data flow result=40 12:03:22 Set A/D channel type result=40 12:03:22 Set A/D encoding result=40 12:03:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:22 Set channel filter=0.000000e+000 result=40 12:03:22 Config A/D Result=40 12:03:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:22 Get A/D filter: -9.255963e+061 result=40 12:03:22 Get A/D value=-858993460 result=40 12:03:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:22 Parameters OK 12:03:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:22 Set A/D data flow result=40 12:03:22 Set A/D channel type result=40 12:03:22 Set A/D encoding result=40 12:03:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:22 Set channel filter=0.000000e+000 result=40 12:03:22 Config A/D Result=40 12:03:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:22 Get A/D filter: -9.255963e+061 result=40 12:03:22 Get A/D value=-858993460 result=40 12:03:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:22 Aux= 12:03:22 Message to Camera, serial 273901 queued 12:03:59 Received message from Master: op=PointingHead serial=273914 12:03:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:03:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:03:59 Point started: ret=0 12:03:59 point_skyscan result=0 12:04:00 Check angles 12:04:00 SkyScan query 12:04:01 SkyScan query done: ret=0 az=64.365<-4291 ze=66.555<-7563 Statuses=0009 0008 12:04:01 Msec=0 True Az=64.365 Ze=66.555 Az status=0009 Ze status=0008 12:04:01 Check angles 12:04:01 SkyScan query 12:04:01 SkyScan query done: ret=0 az=82.32<-5488 ze=66.495<-7567 Statuses=0009 0008 12:04:01 Msec=750 True Az=82.32 Ze=66.495 Az status=0009 Ze status=0008 12:04:02 Check angles 12:04:02 SkyScan query 12:04:02 SkyScan query done: ret=0 az=99.9<-6660 ze=66.495<-7567 Statuses=0009 0008 12:04:02 Msec=1500 True Az=99.9 Ze=66.495 Az status=0009 Ze status=0008 12:04:02 Check angles 12:04:02 SkyScan query 12:04:03 SkyScan query done: ret=0 az=117.255<-7817 ze=66.495<-7567 Statuses=0009 0008 12:04:03 Msec=2250 True Az=117.255 Ze=66.495 Az status=0009 Ze status=0008 12:04:03 Check angles 12:04:03 SkyScan query 12:04:04 SkyScan query done: ret=0 az=135.045<-9003 ze=66.495<-7567 Statuses=0009 0008 12:04:04 Msec=3000 True Az=135.045 Ze=66.495 Az status=0009 Ze status=0008 12:04:04 Check angles 12:04:04 SkyScan query 12:04:04 SkyScan query done: ret=0 az=152.55<-10170 ze=66.495<-7567 Statuses=0009 0008 12:04:04 Msec=3750 True Az=152.55 Ze=66.495 Az status=0009 Ze status=0008 12:04:05 Check angles 12:04:05 SkyScan query 12:04:05 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:04:05 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:04:05 Message to Master queued w/err=0: serial=273914 error=0 12:04:10 Received message from Master: op=Filter serial=273915 12:04:10 Color wheel filter change from 0 to 0 12:04:10 FLIGetFilterPos err=0 currentPosition=0 12:04:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:10 Filter is already there-color wheel unchanged 12:04:10 Received message from Master: op=Shutter serial=273916 12:04:10 Shutter LASER close 12:04:10 Received message from Camera: op=State serial=273918 12:04:10 GetSingleValue result=40 Value=cccccccc 12:04:10 SkyScan query 12:04:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:04:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:11 Parameters OK 12:04:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:11 Set A/D data flow result=40 12:04:11 Set A/D channel type result=40 12:04:11 Set A/D encoding result=40 12:04:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:11 Set channel filter=0.000000e+000 result=40 12:04:11 Config A/D Result=40 12:04:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:11 Get A/D filter: -9.255963e+061 result=40 12:04:11 Get A/D value=-858993460 result=40 12:04:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:11 Parameters OK 12:04:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:11 Set A/D data flow result=40 12:04:11 Set A/D channel type result=40 12:04:11 Set A/D encoding result=40 12:04:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:11 Set channel filter=0.000000e+000 result=40 12:04:11 Config A/D Result=40 12:04:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:11 Get A/D filter: -9.255963e+061 result=40 12:04:11 Get A/D value=-858993460 result=40 12:04:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:11 Aux= 12:04:11 Message to Camera, serial 273918 queued 12:04:48 Received message from Master: op=PointingHead serial=273931 12:04:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:04:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:04:48 Point started: ret=0 12:04:48 point_skyscan result=0 12:04:49 Check angles 12:04:49 SkyScan query 12:04:49 SkyScan query done: ret=0 az=135.045<-9003 ze=36.705<-9553 Statuses=0009 0009 12:04:49 Msec=0 True Az=135.045 Ze=36.705 Az status=0009 Ze status=0009 12:04:50 Check angles 12:04:50 SkyScan query 12:04:50 SkyScan query done: ret=0 az=117.555<-7837 ze=15.81<-10946 Statuses=0009 0009 12:04:50 Msec=750 True Az=117.555 Ze=15.81 Az status=0009 Ze status=0009 12:04:50 Check angles 12:04:50 SkyScan query 12:04:51 SkyScan query done: ret=0 az=100.185<-6679 ze=-5.16<-12344 Statuses=0009 0009 12:04:51 Msec=1500 True Az=100.185 Ze=-5.16 Az status=0009 Ze status=0009 12:04:51 Check angles 12:04:51 SkyScan query 12:04:52 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.58<-13772 Statuses=0009 0009 12:04:52 Msec=2250 True Az=82.245 Ze=-26.58 Az status=0009 Ze status=0009 12:04:52 Check angles 12:04:52 SkyScan query 12:04:52 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.565<-14571 Statuses=0009 0008 12:04:52 Msec=3000 True Az=64.785 Ze=-38.565 Az status=0009 Ze status=0008 12:04:53 Check angles 12:04:53 SkyScan query 12:04:53 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.535<-14569 Statuses=0009 0008 12:04:53 Msec=3750 True Az=47.325 Ze=-38.535 Az status=0009 Ze status=0008 12:04:53 Check angles 12:04:53 SkyScan query 12:04:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:04:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:04:54 Message to Master queued w/err=0: serial=273931 error=0 12:04:59 Received message from Master: op=Filter serial=273932 12:04:59 Color wheel filter change from 0 to 0 12:04:59 FLIGetFilterPos err=0 currentPosition=0 12:04:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:59 Filter is already there-color wheel unchanged 12:04:59 Received message from Master: op=Shutter serial=273933 12:04:59 Shutter LASER close 12:04:59 Received message from Camera: op=State serial=273935 12:04:59 GetSingleValue result=40 Value=cccccccc 12:04:59 SkyScan query 12:05:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:05:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:00 Parameters OK 12:05:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:00 Set A/D data flow result=40 12:05:00 Set A/D channel type result=40 12:05:00 Set A/D encoding result=40 12:05:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:00 Set channel filter=0.000000e+000 result=40 12:05:00 Config A/D Result=40 12:05:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:00 Get A/D filter: -9.255963e+061 result=40 12:05:00 Get A/D value=-858993460 result=40 12:05:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:00 Parameters OK 12:05:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:00 Set A/D data flow result=40 12:05:00 Set A/D channel type result=40 12:05:00 Set A/D encoding result=40 12:05:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:00 Set channel filter=0.000000e+000 result=40 12:05:00 Config A/D Result=40 12:05:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:00 Get A/D filter: -9.255963e+061 result=40 12:05:00 Get A/D value=-858993460 result=40 12:05:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:00 Aux= 12:05:00 Message to Camera, serial 273935 queued 12:05:37 Received message from Master: op=PointingHead serial=273948 12:05:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:05:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:05:37 Point started: ret=0 12:05:37 point_skyscan result=0 12:05:38 Check angles 12:05:38 SkyScan query 12:05:38 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.34<-16556 Statuses=0009 0009 12:05:38 Msec=0 True Az=64.2 Ze=-68.34 Az status=0009 Ze status=0009 [UTC 2018-12-19 12:05:38] 12:05:38 Check angles 12:05:39 SkyScan query 12:05:39 SkyScan query done: ret=0 az=83.19<-5546 ze=-91.035<-18069 Statuses=0009 0009 12:05:39 Msec=750 True Az=83.19 Ze=-91.035 Az status=0009 Ze status=0009 12:05:39 Check angles 12:05:39 SkyScan query 12:05:40 SkyScan query done: ret=0 az=99.045<-6603 ze=-110.265<-19351 Statuses=0009 0009 12:05:40 Msec=1500 True Az=99.045 Ze=-110.265 Az status=0009 Ze status=0009 12:05:40 Check angles 12:05:40 SkyScan query 12:05:41 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.61<-20774 Statuses=0009 0009 12:05:41 Msec=2250 True Az=116.895 Ze=-131.61 Az status=0009 Ze status=0009 12:05:41 Check angles 12:05:41 SkyScan query 12:05:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 12:05:41 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 12:05:41 Check angles 12:05:41 SkyScan query 12:05:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:05:42 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:05:42 Message to Master queued w/err=0: serial=273948 error=0 12:05:47 Received message from Master: op=Filter serial=273949 12:05:47 Color wheel filter change from 0 to 0 12:05:47 FLIGetFilterPos err=0 currentPosition=0 12:05:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:47 Filter is already there-color wheel unchanged 12:05:47 Received message from Master: op=Shutter serial=273950 12:05:47 Shutter LASER close 12:05:47 Received message from Camera: op=State serial=273952 12:05:47 GetSingleValue result=40 Value=cccccccc 12:05:47 SkyScan query 12:05:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:05:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:48 Parameters OK 12:05:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:48 Set A/D data flow result=40 12:05:48 Set A/D channel type result=40 12:05:48 Set A/D encoding result=40 12:05:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:48 Set channel filter=0.000000e+000 result=40 12:05:48 Config A/D Result=40 12:05:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:48 Get A/D filter: -9.255963e+061 result=40 12:05:48 Get A/D value=-858993460 result=40 12:05:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:48 Parameters OK 12:05:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:48 Set A/D data flow result=40 12:05:48 Set A/D channel type result=40 12:05:48 Set A/D encoding result=40 12:05:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:48 Set channel filter=0.000000e+000 result=40 12:05:48 Config A/D Result=40 12:05:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:48 Get A/D filter: -9.255963e+061 result=40 12:05:48 Get A/D value=-858993460 result=40 12:05:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:48 Aux= 12:05:48 Message to Camera, serial 273952 queued 12:06:25 Received message from Master: op=PointingHead serial=273965 12:06:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:06:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:06:25 Point started: ret=0 12:06:25 point_skyscan result=0 12:06:26 Check angles 12:06:26 SkyScan query 12:06:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 12:06:26 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 12:06:27 Check angles 12:06:27 SkyScan query 12:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:06:27 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:06:27 Message to Master queued w/err=0: serial=273965 error=0 12:06:32 Received message from Master: op=Filter serial=273966 12:06:32 Color wheel filter change from 0 to 0 12:06:32 FLIGetFilterPos err=0 currentPosition=0 12:06:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:32 Filter is already there-color wheel unchanged 12:06:32 Received message from Master: op=Shutter serial=273967 12:06:32 Shutter LASER open 12:06:32 Received message from Camera: op=State serial=273969 12:06:32 GetSingleValue result=40 Value=cccccccc 12:06:32 SkyScan query 12:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:06:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:33 Parameters OK 12:06:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:33 Set A/D data flow result=40 12:06:33 Set A/D channel type result=40 12:06:33 Set A/D encoding result=40 12:06:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:33 Set channel filter=0.000000e+000 result=40 12:06:33 Config A/D Result=40 12:06:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:33 Get A/D filter: -9.255963e+061 result=40 12:06:33 Get A/D value=-858993460 result=40 12:06:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:33 Parameters OK 12:06:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:33 Set A/D data flow result=40 12:06:33 Set A/D channel type result=40 12:06:33 Set A/D encoding result=40 12:06:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:33 Set channel filter=0.000000e+000 result=40 12:06:33 Config A/D Result=40 12:06:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:33 Get A/D filter: -9.255963e+061 result=40 12:06:33 Get A/D value=-858993460 result=40 12:06:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:33 Aux= 12:06:33 Message to Camera, serial 273969 queued 12:06:41 Received message from Master: op=Shutter serial=273979 12:06:41 Shutter LASER close 12:06:42 Received message from Master: op=PointingHead serial=273983 12:06:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:06:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:06:42 Point started: ret=0 12:06:42 point_skyscan result=0 12:06:43 Check angles 12:06:43 SkyScan query 12:06:44 SkyScan query done: ret=0 az=136.08<-9072 ze=-143.265<-21551 Statuses=0009 0009 12:06:44 Msec=0 True Az=136.08 Ze=-143.265 Az status=0009 Ze status=0009 12:06:44 Check angles 12:06:44 SkyScan query 12:06:44 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.265<-20151 Statuses=0009 0009 12:06:44 Msec=750 True Az=153.45 Ze=-122.265 Az status=0009 Ze status=0009 12:06:45 Check angles 12:06:45 SkyScan query 12:06:45 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.37<-18758 Statuses=0009 0009 12:06:45 Msec=1500 True Az=171.09 Ze=-101.37 Az status=0009 Ze status=0009 12:06:45 Check angles 12:06:45 SkyScan query 12:06:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.935<-17329 Statuses=0008 0009 12:06:46 Msec=2250 True Az=176.01 Ze=-79.935 Az status=0008 Ze status=0009 12:06:46 Check angles 12:06:46 SkyScan query 12:06:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.935<-15929 Statuses=0008 0009 12:06:47 Msec=3000 True Az=176.01 Ze=-58.935 Az status=0008 Ze status=0009 12:06:47 Check angles 12:06:47 SkyScan query 12:06:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:06:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:06:48 Message to Master queued w/err=0: serial=273983 error=0 12:06:53 Received message from Master: op=Filter serial=273984 12:06:53 Color wheel filter change from 0 to 0 12:06:53 FLIGetFilterPos err=0 currentPosition=0 12:06:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:53 Filter is already there-color wheel unchanged 12:06:53 Received message from Master: op=Shutter serial=273985 12:06:53 Shutter LASER close 12:06:53 Received message from Camera: op=State serial=273987 12:06:53 GetSingleValue result=40 Value=cccccccc 12:06:53 SkyScan query 12:06:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:06:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:53 Parameters OK 12:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:53 Set A/D data flow result=40 12:06:53 Set A/D channel type result=40 12:06:53 Set A/D encoding result=40 12:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:53 Set channel filter=0.000000e+000 result=40 12:06:53 Config A/D Result=40 12:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:53 Get A/D filter: -9.255963e+061 result=40 12:06:53 Get A/D value=-858993460 result=40 12:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:53 Parameters OK 12:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:53 Set A/D data flow result=40 12:06:53 Set A/D channel type result=40 12:06:53 Set A/D encoding result=40 12:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:53 Set channel filter=0.000000e+000 result=40 12:06:53 Config A/D Result=40 12:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:53 Get A/D filter: -9.255963e+061 result=40 12:06:53 Get A/D value=-858993460 result=40 12:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:53 Aux= 12:06:53 Message to Camera, serial 273987 queued 12:07:29 Received message from Master: op=PointingHead serial=273999 12:07:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:07:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:07:30 Point started: ret=0 12:07:30 point_skyscan result=0 12:07:30 Check angles 12:07:30 SkyScan query 12:07:31 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.465<-13431 Statuses=0009 0009 12:07:31 Msec=0 True Az=152.925 Ze=-21.465 Az status=0009 Ze status=0009 12:07:31 Check angles 12:07:31 SkyScan query 12:07:32 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.57<-12038 Statuses=0009 0009 12:07:32 Msec=750 True Az=135.315 Ze=-0.57 Az status=0009 Ze status=0009 12:07:32 Check angles 12:07:32 SkyScan query 12:07:33 SkyScan query done: ret=0 az=117.9<-7860 ze=20.355<-10643 Statuses=0009 0009 12:07:33 Msec=1500 True Az=117.9 Ze=20.355 Az status=0009 Ze status=0009 12:07:33 Check angles 12:07:33 SkyScan query 12:07:33 SkyScan query done: ret=0 az=100.47<-6698 ze=41.37<-9242 Statuses=0009 0009 12:07:33 Msec=2250 True Az=100.47 Ze=41.37 Az status=0009 Ze status=0009 12:07:33 Check angles 12:07:33 SkyScan query 12:07:34 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 12:07:34 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 12:07:34 Check angles 12:07:34 SkyScan query 12:07:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:07:35 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 12:07:35 Message to Master queued w/err=0: serial=273999 error=0 12:07:40 Received message from Master: op=Filter serial=274000 12:07:40 Color wheel filter change from 0 to 0 12:07:40 FLIGetFilterPos err=0 currentPosition=0 12:07:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:40 Filter is already there-color wheel unchanged 12:07:40 Received message from Master: op=Shutter serial=274001 12:07:40 Shutter LASER close 12:07:40 Received message from Camera: op=State serial=274003 12:07:40 GetSingleValue result=40 Value=cccccccc 12:07:40 SkyScan query 12:07:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:07:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:41 Parameters OK 12:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:41 Set A/D data flow result=40 12:07:41 Set A/D channel type result=40 12:07:41 Set A/D encoding result=40 12:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:41 Set channel filter=0.000000e+000 result=40 12:07:41 Config A/D Result=40 12:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:41 Get A/D filter: -9.255963e+061 result=40 12:07:41 Get A/D value=-858993460 result=40 12:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:41 Parameters OK 12:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:41 Set A/D data flow result=40 12:07:41 Set A/D channel type result=40 12:07:41 Set A/D encoding result=40 12:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:41 Set channel filter=0.000000e+000 result=40 12:07:41 Config A/D Result=40 12:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:41 Get A/D filter: -9.255963e+061 result=40 12:07:41 Get A/D value=-858993460 result=40 12:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:41 Aux= 12:07:41 Message to Camera, serial 274003 queued 12:08:16 Received message from Master: op=PointingHead serial=274015 12:08:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:08:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:08:17 Point started: ret=0 12:08:17 point_skyscan result=0 12:08:18 Check angles 12:08:18 SkyScan query 12:08:18 SkyScan query done: ret=0 az=109.005<-7267 ze=38.475<-9435 Statuses=0009 0008 12:08:18 Msec=0 True Az=109.005 Ze=38.475 Az status=0009 Ze status=0008 12:08:18 Check angles 12:08:18 SkyScan query 12:08:19 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 12:08:19 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 12:08:19 Check angles 12:08:19 SkyScan query 12:08:20 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 12:08:20 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 12:08:20 Check angles 12:08:20 SkyScan query 12:08:20 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 12:08:20 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 12:08:21 Check angles 12:08:21 SkyScan query 12:08:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:08:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:08:21 Check angles 12:08:21 SkyScan query 12:08:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:08:22 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:08:22 Message to Master queued w/err=0: serial=274015 error=0 12:08:27 Received message from Master: op=Filter serial=274016 12:08:27 Color wheel filter change from 0 to 0 12:08:27 FLIGetFilterPos err=0 currentPosition=0 12:08:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:27 Filter is already there-color wheel unchanged 12:08:27 Received message from Master: op=Shutter serial=274017 12:08:27 Shutter LASER close 12:08:27 Received message from Camera: op=State serial=274019 12:08:27 GetSingleValue result=40 Value=cccccccc 12:08:27 SkyScan query 12:08:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:08:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:28 Parameters OK 12:08:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:28 Set A/D data flow result=40 12:08:28 Set A/D channel type result=40 12:08:28 Set A/D encoding result=40 12:08:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:28 Set channel filter=0.000000e+000 result=40 12:08:28 Config A/D Result=40 12:08:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:28 Get A/D filter: -9.255963e+061 result=40 12:08:28 Get A/D value=-858993460 result=40 12:08:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:28 Parameters OK 12:08:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:28 Set A/D data flow result=40 12:08:28 Set A/D channel type result=40 12:08:28 Set A/D encoding result=40 12:08:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:28 Set channel filter=0.000000e+000 result=40 12:08:28 Config A/D Result=40 12:08:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:28 Get A/D filter: -9.255963e+061 result=40 12:08:28 Get A/D value=-858993460 result=40 12:08:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:28 Aux= 12:08:28 Message to Camera, serial 274019 queued 12:09:05 Received message from Master: op=PointingHead serial=274032 12:09:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:09:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:09:05 Point started: ret=0 12:09:05 point_skyscan result=0 12:09:06 Check angles 12:09:06 SkyScan query 12:09:06 SkyScan query done: ret=0 az=152.76<-10184 ze=68.535<-7431 Statuses=0009 0009 12:09:06 Msec=0 True Az=152.76 Ze=68.535 Az status=0009 Ze status=0009 12:09:07 Check angles 12:09:07 SkyScan query 12:09:07 SkyScan query done: ret=0 az=135.27<-9018 ze=89.58<-6028 Statuses=0009 0009 12:09:07 Msec=750 True Az=135.27 Ze=89.58 Az status=0009 Ze status=0009 12:09:07 Check angles 12:09:07 SkyScan query 12:09:08 SkyScan query done: ret=0 az=117.795<-7853 ze=110.475<-4635 Statuses=0009 0009 12:09:08 Msec=1500 True Az=117.795 Ze=110.475 Az status=0009 Ze status=0009 12:09:08 Check angles 12:09:08 SkyScan query 12:09:09 SkyScan query done: ret=0 az=112.98<-7532 ze=131.49<-3234 Statuses=0008 0009 12:09:09 Msec=2250 True Az=112.98 Ze=131.49 Az status=0008 Ze status=0009 12:09:09 Check angles 12:09:09 SkyScan query 12:09:09 SkyScan query done: ret=0 az=112.995<-7533 ze=152.34<-1844 Statuses=0008 0009 12:09:09 Msec=3000 True Az=112.995 Ze=152.34 Az status=0008 Ze status=0009 12:09:10 Check angles 12:09:10 SkyScan query 12:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=173.355<-443 Statuses=0008 0009 12:09:10 Msec=3750 True Az=112.995 Ze=173.355 Az status=0008 Ze status=0009 12:09:10 Check angles 12:09:10 SkyScan query 12:09:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 12:09:11 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 12:09:11 Message to Master queued w/err=0: serial=274032 error=0 12:09:16 Received message from Master: op=Filter serial=274033 12:09:16 Color wheel filter change from 0 to 0 12:09:16 FLIGetFilterPos err=0 currentPosition=0 12:09:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:16 Filter is already there-color wheel unchanged 12:09:16 Received message from Master: op=Shutter serial=274034 12:09:16 Shutter LASER open 12:09:16 Received message from Camera: op=State serial=274036 12:09:16 GetSingleValue result=40 Value=cccccccc 12:09:16 SkyScan query 12:09:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:09:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:17 Parameters OK 12:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:17 Set A/D data flow result=40 12:09:17 Set A/D channel type result=40 12:09:17 Set A/D encoding result=40 12:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:17 Set channel filter=0.000000e+000 result=40 12:09:17 Config A/D Result=40 12:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:17 Get A/D filter: -9.255963e+061 result=40 12:09:17 Get A/D value=-858993460 result=40 12:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:17 Parameters OK 12:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:17 Set A/D data flow result=40 12:09:17 Set A/D channel type result=40 12:09:17 Set A/D encoding result=40 12:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:17 Set channel filter=0.000000e+000 result=40 12:09:17 Config A/D Result=40 12:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:17 Get A/D filter: -9.255963e+061 result=40 12:09:17 Get A/D value=-858993460 result=40 12:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:17 Aux= 12:09:17 Message to Camera, serial 274036 queued 12:09:25 Received message from Master: op=Shutter serial=274046 12:09:25 Shutter LASER close 12:09:26 Received message from Master: op=PointingHead serial=274050 12:09:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:09:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:09:26 Point started: ret=0 12:09:26 point_skyscan result=0 12:09:27 Check angles 12:09:27 SkyScan query 12:09:27 SkyScan query done: ret=0 az=89.88<-5992 ze=157.395<-1507 Statuses=0009 0009 12:09:27 Msec=0 True Az=89.88 Ze=157.395 Az status=0009 Ze status=0009 12:09:27 Check angles 12:09:27 SkyScan query 12:09:28 SkyScan query done: ret=0 az=72.105<-4807 ze=135.975<-2935 Statuses=0009 0009 12:09:28 Msec=750 True Az=72.105 Ze=135.975 Az status=0009 Ze status=0009 12:09:28 Check angles 12:09:28 SkyScan query 12:09:29 SkyScan query done: ret=0 az=54.585<-3639 ze=115.035<-4331 Statuses=0009 0009 12:09:29 Msec=1500 True Az=54.585 Ze=115.035 Az status=0009 Ze status=0009 12:09:29 Check angles 12:09:29 SkyScan query 12:09:30 SkyScan query done: ret=0 az=40.98<-2732 ze=94.035<-5731 Statuses=0009 0009 12:09:30 Msec=2250 True Az=40.98 Ze=94.035 Az status=0009 Ze status=0009 12:09:30 Check angles 12:09:30 SkyScan query 12:09:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 12:09:30 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 12:09:31 Check angles 12:09:31 SkyScan query 12:09:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 12:09:31 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 12:09:31 Check angles 12:09:31 SkyScan query 12:09:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:09:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:09:32 Message to Master queued w/err=0: serial=274050 error=0 12:09:37 Received message from Master: op=Filter serial=274051 12:09:37 Color wheel filter change from 0 to 0 12:09:37 FLIGetFilterPos err=0 currentPosition=0 12:09:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:37 Filter is already there-color wheel unchanged 12:09:37 Received message from Master: op=Shutter serial=274052 12:09:37 Shutter LASER close 12:09:37 Received message from Camera: op=State serial=274054 12:09:37 GetSingleValue result=40 Value=cccccccc 12:09:37 SkyScan query 12:09:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:09:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:38 Parameters OK 12:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:38 Set A/D data flow result=40 12:09:38 Set A/D channel type result=40 12:09:38 Set A/D encoding result=40 12:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:38 Set channel filter=0.000000e+000 result=40 12:09:38 Config A/D Result=40 12:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:38 Get A/D filter: -9.255963e+061 result=40 12:09:38 Get A/D value=-858993460 result=40 12:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:38 Parameters OK 12:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:38 Set A/D data flow result=40 12:09:38 Set A/D channel type result=40 12:09:38 Set A/D encoding result=40 12:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:38 Set channel filter=0.000000e+000 result=40 12:09:38 Config A/D Result=40 12:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:38 Get A/D filter: -9.255963e+061 result=40 12:09:38 Get A/D value=-858993460 result=40 12:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:38 Aux= 12:09:38 Message to Camera, serial 274054 queued 12:10:15 Received message from Master: op=PointingHead serial=274067 12:10:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:10:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:10:15 Point started: ret=0 12:10:15 point_skyscan result=0 12:10:16 Check angles 12:10:16 SkyScan query 12:10:16 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 12:10:16 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 12:10:16 Check angles 12:10:16 SkyScan query 12:10:17 SkyScan query done: ret=0 az=81.375<-5425 ze=66.495<-7567 Statuses=0009 0008 12:10:17 Msec=750 True Az=81.375 Ze=66.495 Az status=0009 Ze status=0008 12:10:17 Check angles 12:10:17 SkyScan query 12:10:18 SkyScan query done: ret=0 az=98.82<-6588 ze=66.495<-7567 Statuses=0009 0008 12:10:18 Msec=1500 True Az=98.82 Ze=66.495 Az status=0009 Ze status=0008 12:10:18 Check angles 12:10:18 SkyScan query 12:10:19 SkyScan query done: ret=0 az=116.28<-7752 ze=66.495<-7567 Statuses=0009 0008 12:10:19 Msec=2250 True Az=116.28 Ze=66.495 Az status=0009 Ze status=0008 12:10:19 Check angles 12:10:19 SkyScan query 12:10:19 SkyScan query done: ret=0 az=133.755<-8917 ze=66.495<-7567 Statuses=0009 0008 12:10:19 Msec=3000 True Az=133.755 Ze=66.495 Az status=0009 Ze status=0008 12:10:19 Check angles 12:10:19 SkyScan query 12:10:20 SkyScan query done: ret=0 az=151.23<-10082 ze=66.495<-7567 Statuses=0009 0008 12:10:20 Msec=3750 True Az=151.23 Ze=66.495 Az status=0009 Ze status=0008 12:10:20 Check angles 12:10:20 SkyScan query 12:10:21 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:10:21 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:10:21 Message to Master queued w/err=0: serial=274067 error=0 12:10:26 Received message from Master: op=Filter serial=274068 12:10:26 Color wheel filter change from 0 to 0 12:10:26 FLIGetFilterPos err=0 currentPosition=0 12:10:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:26 Filter is already there-color wheel unchanged 12:10:26 Received message from Master: op=Shutter serial=274069 12:10:26 Shutter LASER close 12:10:26 Received message from Camera: op=State serial=274071 12:10:26 GetSingleValue result=40 Value=cccccccc 12:10:26 SkyScan query 12:10:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:10:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:27 Parameters OK 12:10:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:27 Set A/D data flow result=40 12:10:27 Set A/D channel type result=40 12:10:27 Set A/D encoding result=40 12:10:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:27 Set channel filter=0.000000e+000 result=40 12:10:27 Config A/D Result=40 12:10:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:27 Get A/D filter: -9.255963e+061 result=40 12:10:27 Get A/D value=-858993460 result=40 12:10:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:27 Parameters OK 12:10:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:27 Set A/D data flow result=40 12:10:27 Set A/D channel type result=40 12:10:27 Set A/D encoding result=40 12:10:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:27 Set channel filter=0.000000e+000 result=40 12:10:27 Config A/D Result=40 12:10:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:27 Get A/D filter: -9.255963e+061 result=40 12:10:27 Get A/D value=-858993460 result=40 12:10:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:27 Aux= 12:10:27 Message to Camera, serial 274071 queued 12:11:03 Received message from Master: op=PointingHead serial=274084 12:11:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:11:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:11:04 Point started: ret=0 12:11:04 point_skyscan result=0 12:11:04 Check angles 12:11:04 SkyScan query 12:11:05 SkyScan query done: ret=0 az=135.24<-9016 ze=36.84<-9544 Statuses=0009 0009 12:11:05 Msec=0 True Az=135.24 Ze=36.84 Az status=0009 Ze status=0009 12:11:05 Check angles 12:11:05 SkyScan query 12:11:06 SkyScan query done: ret=0 az=117.27<-7818 ze=15.615<-10959 Statuses=0009 0009 12:11:06 Msec=750 True Az=117.27 Ze=15.615 Az status=0009 Ze status=0009 12:11:06 Check angles 12:11:06 SkyScan query 12:11:07 SkyScan query done: ret=0 az=99.99<-6666 ze=-5.34<-12356 Statuses=0009 0009 12:11:07 Msec=1500 True Az=99.99 Ze=-5.34 Az status=0009 Ze status=0009 12:11:07 Check angles 12:11:07 SkyScan query 12:11:07 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.28<-13752 Statuses=0009 0009 12:11:07 Msec=2250 True Az=82.41 Ze=-26.28 Az status=0009 Ze status=0009 12:11:07 Check angles 12:11:07 SkyScan query 12:11:08 SkyScan query done: ret=0 az=64.98<-4332 ze=-38.565<-14571 Statuses=0009 0008 12:11:08 Msec=3000 True Az=64.98 Ze=-38.565 Az status=0009 Ze status=0008 12:11:08 Check angles 12:11:08 SkyScan query 12:11:09 SkyScan query done: ret=0 az=47.52<-3168 ze=-38.535<-14569 Statuses=0009 0008 12:11:09 Msec=3750 True Az=47.52 Ze=-38.535 Az status=0009 Ze status=0008 12:11:09 Check angles 12:11:09 SkyScan query 12:11:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:11:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:11:10 Message to Master queued w/err=0: serial=274084 error=0 12:11:15 Received message from Master: op=Filter serial=274085 12:11:15 Color wheel filter change from 0 to 0 12:11:15 FLIGetFilterPos err=0 currentPosition=0 12:11:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:15 Filter is already there-color wheel unchanged 12:11:15 Received message from Master: op=Shutter serial=274086 12:11:15 Shutter LASER close 12:11:15 Received message from Camera: op=State serial=274088 12:11:15 GetSingleValue result=40 Value=cccccccc 12:11:15 SkyScan query 12:11:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:11:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:15 Parameters OK 12:11:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:15 Set A/D data flow result=40 12:11:15 Set A/D channel type result=40 12:11:15 Set A/D encoding result=40 12:11:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:15 Set channel filter=0.000000e+000 result=40 12:11:15 Config A/D Result=40 12:11:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:15 Get A/D filter: -9.255963e+061 result=40 12:11:15 Get A/D value=-858993460 result=40 12:11:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:15 Parameters OK 12:11:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:15 Set A/D data flow result=40 12:11:15 Set A/D channel type result=40 12:11:15 Set A/D encoding result=40 12:11:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:15 Set channel filter=0.000000e+000 result=40 12:11:15 Config A/D Result=40 12:11:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:15 Get A/D filter: -9.255963e+061 result=40 12:11:15 Get A/D value=-858993460 result=40 12:11:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:15 Aux= 12:11:15 Message to Camera, serial 274088 queued 12:11:52 Received message from Master: op=PointingHead serial=274101 12:11:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:11:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:11:53 Point started: ret=0 12:11:53 point_skyscan result=0 12:11:53 Check angles 12:11:53 SkyScan query 12:11:54 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.58<-16572 Statuses=0009 0009 12:11:54 Msec=0 True Az=64.2 Ze=-68.58 Az status=0009 Ze status=0009 12:11:54 Check angles 12:11:54 SkyScan query 12:11:55 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.535<-17969 Statuses=0009 0009 12:11:55 Msec=750 True Az=81.615 Ze=-89.535 Az status=0009 Ze status=0009 12:11:55 Check angles 12:11:55 SkyScan query 12:11:55 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.52<-19368 Statuses=0009 0009 12:11:55 Msec=1500 True Az=99.165 Ze=-110.52 Az status=0009 Ze status=0009 12:11:56 Check angles 12:11:56 SkyScan query 12:11:56 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.82<-20788 Statuses=0009 0009 12:11:56 Msec=2250 True Az=117.015 Ze=-131.82 Az status=0009 Ze status=0009 12:11:56 Check angles 12:11:56 SkyScan query 12:11:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 12:11:57 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 12:11:57 Check angles 12:11:57 SkyScan query 12:11:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:11:58 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:11:58 Message to Master queued w/err=0: serial=274101 error=0 12:12:03 Received message from Master: op=Filter serial=274102 12:12:03 Color wheel filter change from 0 to 0 12:12:03 FLIGetFilterPos err=0 currentPosition=0 12:12:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:03 Filter is already there-color wheel unchanged 12:12:03 Received message from Master: op=Shutter serial=274103 12:12:03 Shutter LASER close 12:12:03 Received message from Camera: op=State serial=274105 12:12:03 GetSingleValue result=40 Value=cccccccc 12:12:03 SkyScan query 12:12:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:12:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:04 Parameters OK 12:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:04 Set A/D data flow result=40 12:12:04 Set A/D channel type result=40 12:12:04 Set A/D encoding result=40 12:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:04 Set channel filter=0.000000e+000 result=40 12:12:04 Config A/D Result=40 12:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:04 Get A/D filter: -9.255963e+061 result=40 12:12:04 Get A/D value=-858993460 result=40 12:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:04 Parameters OK 12:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:04 Set A/D data flow result=40 12:12:04 Set A/D channel type result=40 12:12:04 Set A/D encoding result=40 12:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:04 Set channel filter=0.000000e+000 result=40 12:12:04 Config A/D Result=40 12:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:04 Get A/D filter: -9.255963e+061 result=40 12:12:04 Get A/D value=-858993460 result=40 12:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:04 Aux= 12:12:04 Message to Camera, serial 274105 queued 12:12:40 Received message from Master: op=PointingHead serial=274118 12:12:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:12:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:12:41 Point started: ret=0 12:12:41 point_skyscan result=0 12:12:41 Check angles 12:12:41 SkyScan query 12:12:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 12:12:42 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 12:12:42 Check angles 12:12:42 SkyScan query 12:12:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:12:43 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:12:43 Message to Master queued w/err=0: serial=274118 error=0 12:12:48 Received message from Master: op=Filter serial=274119 12:12:48 Color wheel filter change from 0 to 0 12:12:48 FLIGetFilterPos err=0 currentPosition=0 12:12:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:48 Filter is already there-color wheel unchanged 12:12:48 Received message from Master: op=Shutter serial=274120 12:12:48 Shutter LASER open 12:12:48 Received message from Camera: op=State serial=274122 12:12:48 GetSingleValue result=40 Value=cccccccc 12:12:48 SkyScan query 12:12:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:12:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:49 Parameters OK 12:12:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:49 Set A/D data flow result=40 12:12:49 Set A/D channel type result=40 12:12:49 Set A/D encoding result=40 12:12:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:49 Set channel filter=0.000000e+000 result=40 12:12:49 Config A/D Result=40 12:12:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:49 Get A/D filter: -9.255963e+061 result=40 12:12:49 Get A/D value=-858993460 result=40 12:12:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:49 Parameters OK 12:12:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:49 Set A/D data flow result=40 12:12:49 Set A/D channel type result=40 12:12:49 Set A/D encoding result=40 12:12:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:49 Set channel filter=0.000000e+000 result=40 12:12:49 Config A/D Result=40 12:12:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:49 Get A/D filter: -9.255963e+061 result=40 12:12:49 Get A/D value=-858993460 result=40 12:12:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:49 Aux= 12:12:49 Message to Camera, serial 274122 queued 12:12:57 Received message from Master: op=Shutter serial=274132 12:12:57 Shutter LASER close 12:12:58 Received message from Master: op=PointingHead serial=274136 12:12:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:12:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:12:58 Point started: ret=0 12:12:58 point_skyscan result=0 12:12:59 Check angles 12:12:59 SkyScan query 12:12:59 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.55<-21570 Statuses=0009 0009 12:12:59 Msec=0 True Az=135.72 Ze=-143.55 Az status=0009 Ze status=0009 12:13:00 Check angles 12:13:00 SkyScan query 12:13:00 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.1<-20140 Statuses=0009 0009 12:13:00 Msec=750 True Az=153.51 Ze=-122.1 Az status=0009 Ze status=0009 12:13:00 Check angles 12:13:00 SkyScan query 12:13:01 SkyScan query done: ret=0 az=171.15<-11410 ze=-101.205<-18747 Statuses=0009 0009 12:13:01 Msec=1500 True Az=171.15 Ze=-101.205 Az status=0009 Ze status=0009 12:13:01 Check angles 12:13:01 SkyScan query 12:13:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 12:13:02 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 12:13:02 Check angles 12:13:02 SkyScan query 12:13:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.265<-15951 Statuses=0008 0009 12:13:02 Msec=3000 True Az=176.01 Ze=-59.265 Az status=0008 Ze status=0009 12:13:03 Check angles 12:13:03 SkyScan query 12:13:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:13:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:13:03 Message to Master queued w/err=0: serial=274136 error=0 12:13:08 Received message from Master: op=Filter serial=274137 12:13:08 Color wheel filter change from 0 to 0 12:13:08 FLIGetFilterPos err=0 currentPosition=0 12:13:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:08 Filter is already there-color wheel unchanged 12:13:08 Received message from Master: op=Shutter serial=274138 12:13:08 Shutter LASER close 12:13:08 Received message from Camera: op=State serial=274140 12:13:08 GetSingleValue result=40 Value=cccccccc 12:13:08 SkyScan query 12:13:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:13:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:09 Parameters OK 12:13:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:09 Set A/D data flow result=40 12:13:09 Set A/D channel type result=40 12:13:09 Set A/D encoding result=40 12:13:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:09 Set channel filter=0.000000e+000 result=40 12:13:09 Config A/D Result=40 12:13:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:09 Get A/D filter: -9.255963e+061 result=40 12:13:09 Get A/D value=-858993460 result=40 12:13:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:09 Parameters OK 12:13:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:09 Set A/D data flow result=40 12:13:09 Set A/D channel type result=40 12:13:09 Set A/D encoding result=40 12:13:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:09 Set channel filter=0.000000e+000 result=40 12:13:09 Config A/D Result=40 12:13:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:09 Get A/D filter: -9.255963e+061 result=40 12:13:09 Get A/D value=-858993460 result=40 12:13:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:09 Aux= 12:13:09 Message to Camera, serial 274140 queued 12:13:46 Received message from Master: op=PointingHead serial=274153 12:13:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:13:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:13:46 Point started: ret=0 12:13:46 point_skyscan result=0 12:13:47 Check angles 12:13:47 SkyScan query 12:13:48 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.39<-13426 Statuses=0009 0009 12:13:48 Msec=0 True Az=152.76 Ze=-21.39 Az status=0009 Ze status=0009 12:13:48 Check angles 12:13:48 SkyScan query 12:13:48 SkyScan query done: ret=0 az=134.88<-8992 ze=-0.03<-12002 Statuses=0009 0009 12:13:48 Msec=750 True Az=134.88 Ze=-0.03 Az status=0009 Ze status=0009 12:13:48 Check angles 12:13:48 SkyScan query 12:13:49 SkyScan query done: ret=0 az=117.42<-7828 ze=20.97<-10602 Statuses=0009 0009 12:13:49 Msec=1500 True Az=117.42 Ze=20.97 Az status=0009 Ze status=0009 12:13:49 Check angles 12:13:49 SkyScan query 12:13:50 SkyScan query done: ret=0 az=100.08<-6672 ze=41.82<-9212 Statuses=0009 0009 12:13:50 Msec=2250 True Az=100.08 Ze=41.82 Az status=0009 Ze status=0009 12:13:50 Check angles 12:13:50 SkyScan query 12:13:51 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 12:13:51 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 12:13:51 Check angles 12:13:51 SkyScan query 12:13:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:13:51 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 12:13:51 Message to Master queued w/err=0: serial=274153 error=0 12:13:56 Received message from Master: op=Filter serial=274154 12:13:56 Color wheel filter change from 0 to 0 12:13:56 FLIGetFilterPos err=0 currentPosition=0 12:13:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:56 Filter is already there-color wheel unchanged 12:13:56 Received message from Master: op=Shutter serial=274155 12:13:56 Shutter LASER close 12:13:57 Received message from Camera: op=State serial=274157 12:13:57 GetSingleValue result=40 Value=cccccccc 12:13:57 SkyScan query 12:13:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:13:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:57 Parameters OK 12:13:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:57 Set A/D data flow result=40 12:13:57 Set A/D channel type result=40 12:13:57 Set A/D encoding result=40 12:13:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:57 Set channel filter=0.000000e+000 result=40 12:13:57 Config A/D Result=40 12:13:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:57 Get A/D filter: -9.255963e+061 result=40 12:13:57 Get A/D value=-858993460 result=40 12:13:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:57 Parameters OK 12:13:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:57 Set A/D data flow result=40 12:13:57 Set A/D channel type result=40 12:13:57 Set A/D encoding result=40 12:13:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:57 Set channel filter=0.000000e+000 result=40 12:13:57 Config A/D Result=40 12:13:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:57 Get A/D filter: -9.255963e+061 result=40 12:13:57 Get A/D value=-858993460 result=40 12:13:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:57 Aux= 12:13:57 Message to Camera, serial 274157 queued 12:14:34 Received message from Master: op=PointingHead serial=274170 12:14:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:14:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:14:34 Point started: ret=0 12:14:34 point_skyscan result=0 12:14:35 Check angles 12:14:35 SkyScan query 12:14:36 SkyScan query done: ret=0 az=108.705<-7247 ze=38.49<-9434 Statuses=0009 0008 12:14:36 Msec=0 True Az=108.705 Ze=38.49 Az status=0009 Ze status=0008 12:14:36 Check angles 12:14:36 SkyScan query 12:14:36 SkyScan query done: ret=0 az=126.21<-8414 ze=38.505<-9433 Statuses=0009 0008 12:14:36 Msec=750 True Az=126.21 Ze=38.505 Az status=0009 Ze status=0008 12:14:37 Check angles 12:14:37 SkyScan query 12:14:37 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 12:14:37 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 12:14:37 Check angles 12:14:37 SkyScan query 12:14:38 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 12:14:38 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 12:14:38 Check angles 12:14:38 SkyScan query 12:14:39 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:14:39 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:14:39 Check angles 12:14:39 SkyScan query 12:14:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:14:39 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:14:39 Message to Master queued w/err=0: serial=274170 error=0 12:14:44 Received message from Master: op=Filter serial=274171 12:14:44 Color wheel filter change from 0 to 0 12:14:44 FLIGetFilterPos err=0 currentPosition=0 12:14:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:44 Filter is already there-color wheel unchanged 12:14:45 Received message from Master: op=Shutter serial=274172 12:14:45 Shutter LASER close 12:14:45 Received message from Camera: op=State serial=274174 12:14:45 GetSingleValue result=40 Value=cccccccc 12:14:45 SkyScan query 12:14:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:14:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:45 Parameters OK 12:14:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:45 Set A/D data flow result=40 12:14:45 Set A/D channel type result=40 12:14:45 Set A/D encoding result=40 12:14:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:45 Set channel filter=0.000000e+000 result=40 12:14:45 Config A/D Result=40 12:14:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:45 Get A/D filter: -9.255963e+061 result=40 12:14:45 Get A/D value=-858993460 result=40 12:14:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:45 Parameters OK 12:14:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:45 Set A/D data flow result=40 12:14:45 Set A/D channel type result=40 12:14:45 Set A/D encoding result=40 12:14:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:45 Set channel filter=0.000000e+000 result=40 12:14:45 Config A/D Result=40 12:14:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:45 Get A/D filter: -9.255963e+061 result=40 12:14:45 Get A/D value=-858993460 result=40 12:14:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:45 Aux= 12:14:45 Message to Camera, serial 274174 queued 12:15:22 Received message from Master: op=PointingHead serial=274187 12:15:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:15:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:15:22 Point started: ret=0 12:15:22 point_skyscan result=0 12:15:23 Check angles 12:15:23 SkyScan query 12:15:24 SkyScan query done: ret=0 az=153.12<-10208 ze=68.22<-7452 Statuses=0009 0009 12:15:24 Msec=0 True Az=153.12 Ze=68.22 Az status=0009 Ze status=0009 12:15:24 Check angles 12:15:24 SkyScan query 12:15:25 SkyScan query done: ret=0 az=135.66<-9044 ze=89.22<-6052 Statuses=0009 0009 12:15:25 Msec=750 True Az=135.66 Ze=89.22 Az status=0009 Ze status=0009 12:15:25 Check angles 12:15:25 SkyScan query 12:15:25 SkyScan query done: ret=0 az=118.11<-7874 ze=110.16<-4656 Statuses=0009 0009 12:15:25 Msec=1500 True Az=118.11 Ze=110.16 Az status=0009 Ze status=0009 12:15:26 Check angles 12:15:26 SkyScan query 12:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=131.55<-3230 Statuses=0008 0009 12:15:26 Msec=2250 True Az=112.995 Ze=131.55 Az status=0008 Ze status=0009 12:15:26 Check angles 12:15:26 SkyScan query 12:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=152.43<-1838 Statuses=0008 0009 [UTC 2018-12-19 12:15:27] 12:15:27 Msec=3000 True Az=112.995 Ze=152.43 Az status=0008 Ze status=0009 12:15:27 Received message from Master: op=Identify serial=274188 12:15:27 Check angles 12:15:27 SkyScan query 12:15:28 SkyScan query done: ret=0 az=112.995<-7533 ze=173.43<-438 Statuses=0008 0009 12:15:28 Msec=3750 True Az=112.995 Ze=173.43 Az status=0008 Ze status=0009 12:15:28 Check angles 12:15:28 SkyScan query 12:15:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 12:15:28 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 12:15:28 Message to Master queued w/err=0: serial=274187 error=0 12:15:33 Received message from Master: op=Filter serial=274191 12:15:33 Color wheel filter change from 0 to 0 12:15:33 FLIGetFilterPos err=0 currentPosition=0 12:15:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:33 Filter is already there-color wheel unchanged 12:15:34 Received message from Master: op=Shutter serial=274192 12:15:34 Shutter LASER open 12:15:34 Received message from Camera: op=State serial=274194 12:15:34 GetSingleValue result=40 Value=cccccccc 12:15:34 SkyScan query 12:15:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:15:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:34 Parameters OK 12:15:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:34 Set A/D data flow result=40 12:15:34 Set A/D channel type result=40 12:15:34 Set A/D encoding result=40 12:15:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:34 Set channel filter=0.000000e+000 result=40 12:15:34 Config A/D Result=40 12:15:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:34 Get A/D filter: -9.255963e+061 result=40 12:15:34 Get A/D value=-858993460 result=40 12:15:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:34 Parameters OK 12:15:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:34 Set A/D data flow result=40 12:15:34 Set A/D channel type result=40 12:15:34 Set A/D encoding result=40 12:15:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:34 Set channel filter=0.000000e+000 result=40 12:15:34 Config A/D Result=40 12:15:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:34 Get A/D filter: -9.255963e+061 result=40 12:15:34 Get A/D value=-858993460 result=40 12:15:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:34 Aux= 12:15:34 Message to Camera, serial 274194 queued 12:15:43 Received message from Master: op=Shutter serial=274204 12:15:43 Shutter LASER close 12:15:43 Received message from Master: op=PointingHead serial=274208 12:15:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:15:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:15:43 Point started: ret=0 12:15:43 point_skyscan result=0 12:15:44 Check angles 12:15:44 SkyScan query 12:15:45 SkyScan query done: ret=0 az=89.88<-5992 ze=157.26<-1516 Statuses=0009 0009 12:15:45 Msec=0 True Az=89.88 Ze=157.26 Az status=0009 Ze status=0009 12:15:45 Check angles 12:15:45 SkyScan query 12:15:46 SkyScan query done: ret=0 az=72.555<-4837 ze=136.245<-2917 Statuses=0009 0009 12:15:46 Msec=750 True Az=72.555 Ze=136.245 Az status=0009 Ze status=0009 12:15:46 Check angles 12:15:46 SkyScan query 12:15:46 SkyScan query done: ret=0 az=54.975<-3665 ze=115.365<-4309 Statuses=0009 0009 12:15:46 Msec=1500 True Az=54.975 Ze=115.365 Az status=0009 Ze status=0009 12:15:46 Check angles 12:15:46 SkyScan query 12:15:47 SkyScan query done: ret=0 az=40.995<-2733 ze=94.32<-5712 Statuses=0009 0009 12:15:47 Msec=2250 True Az=40.995 Ze=94.32 Az status=0009 Ze status=0009 12:15:47 Check angles 12:15:47 SkyScan query 12:15:48 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 12:15:48 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 12:15:48 Check angles 12:15:48 SkyScan query 12:15:49 SkyScan query done: ret=0 az=40.995<-2733 ze=52.815<-8479 Statuses=0008 0009 12:15:49 Msec=3750 True Az=40.995 Ze=52.815 Az status=0008 Ze status=0009 12:15:49 Check angles 12:15:49 SkyScan query 12:15:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:15:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:15:49 Message to Master queued w/err=0: serial=274208 error=0 [UTC 2018-12-19 12:15:52] 12:15:54 Received message from Master: op=Filter serial=274209 12:15:54 Color wheel filter change from 0 to 0 12:15:54 FLIGetFilterPos err=0 currentPosition=0 12:15:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:54 Filter is already there-color wheel unchanged 12:15:54 Received message from Master: op=Shutter serial=274210 12:15:54 Shutter LASER close 12:15:55 Received message from Camera: op=State serial=274212 12:15:55 GetSingleValue result=40 Value=cccccccc 12:15:55 SkyScan query 12:15:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:15:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:55 Parameters OK 12:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:55 Set A/D data flow result=40 12:15:55 Set A/D channel type result=40 12:15:55 Set A/D encoding result=40 12:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:55 Set channel filter=0.000000e+000 result=40 12:15:55 Config A/D Result=40 12:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:55 Get A/D filter: -9.255963e+061 result=40 12:15:55 Get A/D value=-858993460 result=40 12:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:55 Parameters OK 12:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:55 Set A/D data flow result=40 12:15:55 Set A/D channel type result=40 12:15:55 Set A/D encoding result=40 12:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:55 Set channel filter=0.000000e+000 result=40 12:15:55 Config A/D Result=40 12:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:55 Get A/D filter: -9.255963e+061 result=40 12:15:55 Get A/D value=-858993460 result=40 12:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:55 Aux= 12:15:55 Message to Camera, serial 274212 queued 12:16:31 Received message from Master: op=PointingHead serial=274224 12:16:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:16:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:16:31 Point started: ret=0 12:16:31 point_skyscan result=0 12:16:32 Check angles 12:16:32 SkyScan query 12:16:33 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 12:16:33 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 12:16:33 Check angles 12:16:33 SkyScan query 12:16:34 SkyScan query done: ret=0 az=81.375<-5425 ze=66.495<-7567 Statuses=0009 0008 12:16:34 Msec=750 True Az=81.375 Ze=66.495 Az status=0009 Ze status=0008 12:16:34 Check angles 12:16:34 SkyScan query 12:16:34 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 12:16:34 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 12:16:34 Check angles 12:16:34 SkyScan query 12:16:35 SkyScan query done: ret=0 az=116.325<-7755 ze=66.495<-7567 Statuses=0009 0008 12:16:35 Msec=2250 True Az=116.325 Ze=66.495 Az status=0009 Ze status=0008 12:16:35 Check angles 12:16:35 SkyScan query 12:16:36 SkyScan query done: ret=0 az=133.74<-8916 ze=66.495<-7567 Statuses=0009 0008 12:16:36 Msec=3000 True Az=133.74 Ze=66.495 Az status=0009 Ze status=0008 12:16:36 Check angles 12:16:36 SkyScan query 12:16:37 SkyScan query done: ret=0 az=151.17<-10078 ze=66.495<-7567 Statuses=0009 0008 12:16:37 Msec=3750 True Az=151.17 Ze=66.495 Az status=0009 Ze status=0008 12:16:37 Check angles 12:16:37 SkyScan query 12:16:37 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:16:37 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:16:37 Message to Master queued w/err=0: serial=274224 error=0 12:16:42 Received message from Master: op=Filter serial=274225 12:16:42 Color wheel filter change from 0 to 0 12:16:42 FLIGetFilterPos err=0 currentPosition=0 12:16:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:42 Filter is already there-color wheel unchanged 12:16:42 Received message from Master: op=Shutter serial=274226 12:16:42 Shutter LASER close 12:16:43 Received message from Camera: op=State serial=274228 12:16:43 GetSingleValue result=40 Value=cccccccc 12:16:43 SkyScan query 12:16:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:16:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:43 Parameters OK 12:16:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:43 Set A/D data flow result=40 12:16:43 Set A/D channel type result=40 12:16:43 Set A/D encoding result=40 12:16:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:43 Set channel filter=0.000000e+000 result=40 12:16:43 Config A/D Result=40 12:16:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:43 Get A/D filter: -9.255963e+061 result=40 12:16:43 Get A/D value=-858993460 result=40 12:16:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:43 Parameters OK 12:16:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:43 Set A/D data flow result=40 12:16:43 Set A/D channel type result=40 12:16:43 Set A/D encoding result=40 12:16:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:43 Set channel filter=0.000000e+000 result=40 12:16:43 Config A/D Result=40 12:16:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:43 Get A/D filter: -9.255963e+061 result=40 12:16:43 Get A/D value=-858993460 result=40 12:16:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:43 Aux= 12:16:43 Message to Camera, serial 274228 queued 12:17:20 Received message from Master: op=PointingHead serial=274241 12:17:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:17:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:17:20 Point started: ret=0 12:17:20 point_skyscan result=0 12:17:21 Check angles 12:17:21 SkyScan query 12:17:22 SkyScan query done: ret=0 az=134.955<-8997 ze=36.66<-9556 Statuses=0009 0009 12:17:22 Msec=0 True Az=134.955 Ze=36.66 Az status=0009 Ze status=0009 12:17:22 Check angles 12:17:22 SkyScan query 12:17:22 SkyScan query done: ret=0 az=117.48<-7832 ze=15.78<-10948 Statuses=0009 0009 12:17:22 Msec=750 True Az=117.48 Ze=15.78 Az status=0009 Ze status=0009 12:17:23 Check angles 12:17:23 SkyScan query 12:17:23 SkyScan query done: ret=0 az=100.095<-6673 ze=-5.205<-12347 Statuses=0009 0009 12:17:23 Msec=1500 True Az=100.095 Ze=-5.205 Az status=0009 Ze status=0009 12:17:23 Check angles 12:17:23 SkyScan query 12:17:24 SkyScan query done: ret=0 az=82.5<-5500 ze=-26.13<-13742 Statuses=0009 0009 12:17:24 Msec=2250 True Az=82.5 Ze=-26.13 Az status=0009 Ze status=0009 12:17:24 Check angles 12:17:24 SkyScan query 12:17:25 SkyScan query done: ret=0 az=65.07<-4338 ze=-38.565<-14571 Statuses=0009 0008 12:17:25 Msec=3000 True Az=65.07 Ze=-38.565 Az status=0009 Ze status=0008 12:17:25 Check angles 12:17:25 SkyScan query 12:17:25 SkyScan query done: ret=0 az=47.655<-3177 ze=-38.535<-14569 Statuses=0009 0008 12:17:25 Msec=3750 True Az=47.655 Ze=-38.535 Az status=0009 Ze status=0008 12:17:26 Check angles 12:17:26 SkyScan query 12:17:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:17:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:17:26 Message to Master queued w/err=0: serial=274241 error=0 12:17:31 Received message from Master: op=Filter serial=274242 12:17:31 Color wheel filter change from 0 to 0 12:17:31 FLIGetFilterPos err=0 currentPosition=0 12:17:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:31 Filter is already there-color wheel unchanged 12:17:31 Received message from Master: op=Shutter serial=274243 12:17:31 Shutter LASER close 12:17:31 Received message from Camera: op=State serial=274245 12:17:31 GetSingleValue result=40 Value=cccccccc 12:17:31 SkyScan query 12:17:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:17:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:32 Parameters OK 12:17:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:32 Set A/D data flow result=40 12:17:32 Set A/D channel type result=40 12:17:32 Set A/D encoding result=40 12:17:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:32 Set channel filter=0.000000e+000 result=40 12:17:32 Config A/D Result=40 12:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:32 Get A/D filter: -9.255963e+061 result=40 12:17:32 Get A/D value=-858993460 result=40 12:17:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:32 Parameters OK 12:17:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:32 Set A/D data flow result=40 12:17:32 Set A/D channel type result=40 12:17:32 Set A/D encoding result=40 12:17:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:32 Set channel filter=0.000000e+000 result=40 12:17:32 Config A/D Result=40 12:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:32 Get A/D filter: -9.255963e+061 result=40 12:17:32 Get A/D value=-858993460 result=40 12:17:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:32 Aux= 12:17:32 Message to Camera, serial 274245 queued 12:18:09 Received message from Master: op=PointingHead serial=274258 12:18:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:18:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:18:09 Point started: ret=0 12:18:09 point_skyscan result=0 12:18:10 Check angles 12:18:10 SkyScan query 12:18:10 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.46<-16564 Statuses=0009 0009 12:18:10 Msec=0 True Az=64.095 Ze=-68.46 Az status=0009 Ze status=0009 12:18:11 Check angles 12:18:11 SkyScan query 12:18:11 SkyScan query done: ret=0 az=81.945<-5463 ze=-89.835<-17989 Statuses=0009 0009 12:18:11 Msec=750 True Az=81.945 Ze=-89.835 Az status=0009 Ze status=0009 12:18:11 Check angles 12:18:11 SkyScan query 12:18:12 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.82<-19388 Statuses=0009 0009 12:18:12 Msec=1500 True Az=99.45 Ze=-110.82 Az status=0009 Ze status=0009 12:18:12 Check angles 12:18:12 SkyScan query 12:18:13 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.715<-20781 Statuses=0009 0009 12:18:13 Msec=2250 True Az=116.895 Ze=-131.715 Az status=0009 Ze status=0009 12:18:13 Check angles 12:18:13 SkyScan query 12:18:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 12:18:13 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 12:18:14 Check angles 12:18:14 SkyScan query 12:18:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:18:14 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:18:14 Message to Master queued w/err=0: serial=274258 error=0 12:18:19 Received message from Master: op=Filter serial=274259 12:18:19 Color wheel filter change from 0 to 0 12:18:19 FLIGetFilterPos err=0 currentPosition=0 12:18:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:19 Filter is already there-color wheel unchanged 12:18:19 Received message from Master: op=Shutter serial=274260 12:18:19 Shutter LASER close 12:18:19 Received message from Camera: op=State serial=274262 12:18:19 GetSingleValue result=40 Value=cccccccc 12:18:19 SkyScan query 12:18:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:18:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:20 Parameters OK 12:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:20 Set A/D data flow result=40 12:18:20 Set A/D channel type result=40 12:18:20 Set A/D encoding result=40 12:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:20 Set channel filter=0.000000e+000 result=40 12:18:20 Config A/D Result=40 12:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:20 Get A/D filter: -9.255963e+061 result=40 12:18:20 Get A/D value=-858993460 result=40 12:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:20 Parameters OK 12:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:20 Set A/D data flow result=40 12:18:20 Set A/D channel type result=40 12:18:20 Set A/D encoding result=40 12:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:20 Set channel filter=0.000000e+000 result=40 12:18:20 Config A/D Result=40 12:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:20 Get A/D filter: -9.255963e+061 result=40 12:18:20 Get A/D value=-858993460 result=40 12:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:20 Aux= 12:18:20 Message to Camera, serial 274262 queued 12:18:57 Received message from Master: op=PointingHead serial=274275 12:18:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:18:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:18:57 Point started: ret=0 12:18:57 point_skyscan result=0 12:18:58 Check angles 12:18:58 SkyScan query 12:18:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 12:18:59 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 12:18:59 Check angles 12:18:59 SkyScan query 12:18:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:18:59 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:18:59 Message to Master queued w/err=0: serial=274275 error=0 12:19:04 Received message from Master: op=Filter serial=274276 12:19:04 Color wheel filter change from 0 to 0 12:19:04 FLIGetFilterPos err=0 currentPosition=0 12:19:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:04 Filter is already there-color wheel unchanged 12:19:04 Received message from Master: op=Shutter serial=274277 12:19:05 Shutter LASER open 12:19:05 Received message from Camera: op=State serial=274279 12:19:05 GetSingleValue result=40 Value=cccccccc 12:19:05 SkyScan query 12:19:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:19:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:05 Parameters OK 12:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:05 Set A/D data flow result=40 12:19:05 Set A/D channel type result=40 12:19:05 Set A/D encoding result=40 12:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:05 Set channel filter=0.000000e+000 result=40 12:19:05 Config A/D Result=40 12:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:05 Get A/D filter: -9.255963e+061 result=40 12:19:05 Get A/D value=-858993460 result=40 12:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:05 Parameters OK 12:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:05 Set A/D data flow result=40 12:19:05 Set A/D channel type result=40 12:19:05 Set A/D encoding result=40 12:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:05 Set channel filter=0.000000e+000 result=40 12:19:05 Config A/D Result=40 12:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:05 Get A/D filter: -9.255963e+061 result=40 12:19:05 Get A/D value=-858993460 result=40 12:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:05 Aux= 12:19:05 Message to Camera, serial 274279 queued 12:19:14 Received message from Master: op=Shutter serial=274289 12:19:14 Shutter LASER close 12:19:14 Received message from Master: op=PointingHead serial=274293 12:19:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:19:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:19:15 Point started: ret=0 12:19:15 point_skyscan result=0 12:19:15 Check angles 12:19:15 SkyScan query 12:19:16 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.25<-21550 Statuses=0009 0009 12:19:16 Msec=0 True Az=135.975 Ze=-143.25 Az status=0009 Ze status=0009 12:19:16 Check angles 12:19:16 SkyScan query 12:19:17 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.265<-20151 Statuses=0009 0009 12:19:17 Msec=750 True Az=153.435 Ze=-122.265 Az status=0009 Ze status=0009 12:19:17 Check angles 12:19:17 SkyScan query 12:19:17 SkyScan query done: ret=0 az=171.345<-11423 ze=-100.845<-18723 Statuses=0009 0009 12:19:17 Msec=1500 True Az=171.345 Ze=-100.845 Az status=0009 Ze status=0009 12:19:18 Check angles 12:19:18 SkyScan query 12:19:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.965<-17331 Statuses=0008 0009 12:19:18 Msec=2250 True Az=176.01 Ze=-79.965 Az status=0008 Ze status=0009 12:19:18 Check angles 12:19:18 SkyScan query 12:19:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.965<-15931 Statuses=0008 0009 12:19:19 Msec=3000 True Az=176.01 Ze=-58.965 Az status=0008 Ze status=0009 12:19:19 Check angles 12:19:19 SkyScan query 12:19:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:19:20 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:19:20 Message to Master queued w/err=0: serial=274293 error=0 12:19:25 Received message from Master: op=Filter serial=274294 12:19:25 Color wheel filter change from 0 to 0 12:19:25 FLIGetFilterPos err=0 currentPosition=0 12:19:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:25 Filter is already there-color wheel unchanged 12:19:25 Received message from Master: op=Shutter serial=274295 12:19:25 Shutter LASER close 12:19:25 Received message from Camera: op=State serial=274297 12:19:25 GetSingleValue result=40 Value=cccccccc 12:19:25 SkyScan query 12:19:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:19:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:26 Parameters OK 12:19:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:26 Set A/D data flow result=40 12:19:26 Set A/D channel type result=40 12:19:26 Set A/D encoding result=40 12:19:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:26 Set channel filter=0.000000e+000 result=40 12:19:26 Config A/D Result=40 12:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:26 Get A/D filter: -9.255963e+061 result=40 12:19:26 Get A/D value=-858993460 result=40 12:19:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:26 Parameters OK 12:19:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:26 Set A/D data flow result=40 12:19:26 Set A/D channel type result=40 12:19:26 Set A/D encoding result=40 12:19:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:26 Set channel filter=0.000000e+000 result=40 12:19:26 Config A/D Result=40 12:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:26 Get A/D filter: -9.255963e+061 result=40 12:19:26 Get A/D value=-858993460 result=40 12:19:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:26 Aux= 12:19:26 Message to Camera, serial 274297 queued 12:20:02 Received message from Master: op=PointingHead serial=274310 12:20:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:20:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:20:03 Point started: ret=0 12:20:03 point_skyscan result=0 12:20:04 Check angles 12:20:04 SkyScan query 12:20:04 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.54<-13436 Statuses=0009 0009 12:20:04 Msec=0 True Az=152.91 Ze=-21.54 Az status=0009 Ze status=0009 12:20:04 Check angles 12:20:04 SkyScan query 12:20:05 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.555<-12037 Statuses=0009 0009 12:20:05 Msec=750 True Az=135.36 Ze=-0.555 Az status=0009 Ze status=0009 12:20:05 Check angles 12:20:05 SkyScan query 12:20:06 SkyScan query done: ret=0 az=117.825<-7855 ze=20.37<-10642 Statuses=0009 0009 12:20:06 Msec=1500 True Az=117.825 Ze=20.37 Az status=0009 Ze status=0009 12:20:06 Check angles 12:20:06 SkyScan query 12:20:06 SkyScan query done: ret=0 az=100.5<-6700 ze=41.37<-9242 Statuses=0009 0009 12:20:06 Msec=2250 True Az=100.5 Ze=41.37 Az status=0009 Ze status=0009 12:20:07 Check angles 12:20:07 SkyScan query 12:20:07 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 12:20:07 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 12:20:07 Check angles 12:20:07 SkyScan query 12:20:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:20:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:20:08 Message to Master queued w/err=0: serial=274310 error=0 12:20:13 Received message from Master: op=Filter serial=274311 12:20:13 Color wheel filter change from 0 to 0 12:20:13 FLIGetFilterPos err=0 currentPosition=0 12:20:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:13 Filter is already there-color wheel unchanged 12:20:13 Received message from Master: op=Shutter serial=274312 12:20:13 Shutter LASER close 12:20:13 Received message from Camera: op=State serial=274314 12:20:13 GetSingleValue result=40 Value=cccccccc 12:20:13 SkyScan query 12:20:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:20:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:14 Parameters OK 12:20:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:14 Set A/D data flow result=40 12:20:14 Set A/D channel type result=40 12:20:14 Set A/D encoding result=40 12:20:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:14 Set channel filter=0.000000e+000 result=40 12:20:14 Config A/D Result=40 12:20:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:14 Get A/D filter: -9.255963e+061 result=40 12:20:14 Get A/D value=-858993460 result=40 12:20:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:14 Parameters OK 12:20:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:14 Set A/D data flow result=40 12:20:14 Set A/D channel type result=40 12:20:14 Set A/D encoding result=40 12:20:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:14 Set channel filter=0.000000e+000 result=40 12:20:14 Config A/D Result=40 12:20:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:14 Get A/D filter: -9.255963e+061 result=40 12:20:14 Get A/D value=-858993460 result=40 12:20:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:14 Aux= 12:20:14 Message to Camera, serial 274314 queued 12:20:51 Received message from Master: op=PointingHead serial=274327 12:20:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:20:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:20:51 Point started: ret=0 12:20:51 point_skyscan result=0 12:20:52 Check angles 12:20:52 SkyScan query 12:20:52 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 12:20:52 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 12:20:52 Check angles 12:20:52 SkyScan query 12:20:53 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 12:20:53 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 12:20:53 Check angles 12:20:53 SkyScan query 12:20:54 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 12:20:54 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 12:20:54 Check angles 12:20:54 SkyScan query 12:20:54 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 12:20:54 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 12:20:55 Check angles 12:20:55 SkyScan query 12:20:55 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:20:55 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:20:55 Check angles 12:20:55 SkyScan query 12:20:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:20:56 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:20:56 Message to Master queued w/err=0: serial=274327 error=0 12:21:01 Received message from Master: op=Filter serial=274328 12:21:01 Color wheel filter change from 0 to 0 12:21:01 FLIGetFilterPos err=0 currentPosition=0 12:21:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:01 Filter is already there-color wheel unchanged 12:21:01 Received message from Master: op=Shutter serial=274329 12:21:01 Shutter LASER close 12:21:01 Received message from Camera: op=State serial=274331 12:21:01 GetSingleValue result=40 Value=cccccccc 12:21:01 SkyScan query 12:21:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:21:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:02 Parameters OK 12:21:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:02 Set A/D data flow result=40 12:21:02 Set A/D channel type result=40 12:21:02 Set A/D encoding result=40 12:21:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:02 Set channel filter=0.000000e+000 result=40 12:21:02 Config A/D Result=40 12:21:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:02 Get A/D filter: -9.255963e+061 result=40 12:21:02 Get A/D value=-858993460 result=40 12:21:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:02 Parameters OK 12:21:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:02 Set A/D data flow result=40 12:21:02 Set A/D channel type result=40 12:21:02 Set A/D encoding result=40 12:21:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:02 Set channel filter=0.000000e+000 result=40 12:21:02 Config A/D Result=40 12:21:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:02 Get A/D filter: -9.255963e+061 result=40 12:21:02 Get A/D value=-858993460 result=40 12:21:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:02 Aux= 12:21:02 Message to Camera, serial 274331 queued 12:21:39 Received message from Master: op=PointingHead serial=274344 12:21:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:21:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:21:39 Point started: ret=0 12:21:39 point_skyscan result=0 12:21:40 Check angles 12:21:40 SkyScan query 12:21:40 SkyScan query done: ret=0 az=152.76<-10184 ze=68.505<-7433 Statuses=0009 0009 12:21:40 Msec=0 True Az=152.76 Ze=68.505 Az status=0009 Ze status=0009 12:21:41 Check angles 12:21:41 SkyScan query 12:21:41 SkyScan query done: ret=0 az=135.39<-9026 ze=89.55<-6030 Statuses=0009 0009 12:21:41 Msec=750 True Az=135.39 Ze=89.55 Az status=0009 Ze status=0009 12:21:41 Check angles 12:21:41 SkyScan query 12:21:42 SkyScan query done: ret=0 az=117.855<-7857 ze=110.445<-4637 Statuses=0009 0009 12:21:42 Msec=1500 True Az=117.855 Ze=110.445 Az status=0009 Ze status=0009 12:21:42 Check angles 12:21:42 SkyScan query 12:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=131.43<-3238 Statuses=0008 0009 12:21:43 Msec=2250 True Az=112.995 Ze=131.43 Az status=0008 Ze status=0009 12:21:43 Check angles 12:21:43 SkyScan query 12:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=152.325<-1845 Statuses=0008 0009 12:21:43 Msec=3000 True Az=112.995 Ze=152.325 Az status=0008 Ze status=0009 12:21:44 Check angles 12:21:44 SkyScan query 12:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=173.76<-416 Statuses=0008 0009 12:21:44 Msec=3750 True Az=112.995 Ze=173.76 Az status=0008 Ze status=0009 12:21:44 Check angles 12:21:44 SkyScan query 12:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 12:21:45 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 12:21:45 Message to Master queued w/err=0: serial=274344 error=0 12:21:50 Received message from Master: op=Filter serial=274345 12:21:50 Color wheel filter change from 0 to 0 12:21:50 FLIGetFilterPos err=0 currentPosition=0 12:21:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:50 Filter is already there-color wheel unchanged 12:21:50 Received message from Master: op=Shutter serial=274346 12:21:50 Shutter LASER open 12:21:50 Received message from Camera: op=State serial=274348 12:21:50 GetSingleValue result=40 Value=cccccccc 12:21:50 SkyScan query 12:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:21:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:51 Parameters OK 12:21:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:51 Set A/D data flow result=40 12:21:51 Set A/D channel type result=40 12:21:51 Set A/D encoding result=40 12:21:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:51 Set channel filter=0.000000e+000 result=40 12:21:51 Config A/D Result=40 12:21:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:51 Get A/D filter: -9.255963e+061 result=40 12:21:51 Get A/D value=-858993460 result=40 12:21:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:51 Parameters OK 12:21:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:51 Set A/D data flow result=40 12:21:51 Set A/D channel type result=40 12:21:51 Set A/D encoding result=40 12:21:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:51 Set channel filter=0.000000e+000 result=40 12:21:51 Config A/D Result=40 12:21:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:51 Get A/D filter: -9.255963e+061 result=40 12:21:51 Get A/D value=-858993460 result=40 12:21:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:51 Aux= 12:21:51 Message to Camera, serial 274348 queued 12:21:59 Received message from Master: op=Shutter serial=274358 12:21:59 Shutter LASER close 12:22:00 Received message from Master: op=PointingHead serial=274362 12:22:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:22:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:22:00 Point started: ret=0 12:22:00 point_skyscan result=0 12:22:01 Check angles 12:22:01 SkyScan query 12:22:01 SkyScan query done: ret=0 az=90.045<-6003 ze=157.305<-1513 Statuses=0009 0009 12:22:01 Msec=0 True Az=90.045 Ze=157.305 Az status=0009 Ze status=0009 12:22:02 Check angles 12:22:02 SkyScan query 12:22:02 SkyScan query done: ret=0 az=72.135<-4809 ze=135.9<-2940 Statuses=0009 0009 12:22:02 Msec=750 True Az=72.135 Ze=135.9 Az status=0009 Ze status=0009 12:22:02 Check angles 12:22:02 SkyScan query 12:22:03 SkyScan query done: ret=0 az=54.36<-3624 ze=114.435<-4371 Statuses=0009 0009 12:22:03 Msec=1500 True Az=54.36 Ze=114.435 Az status=0009 Ze status=0009 12:22:03 Check angles 12:22:03 SkyScan query 12:22:04 SkyScan query done: ret=0 az=40.98<-2732 ze=93.57<-5762 Statuses=0009 0009 12:22:04 Msec=2250 True Az=40.98 Ze=93.57 Az status=0009 Ze status=0009 12:22:04 Check angles 12:22:04 SkyScan query 12:22:04 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 12:22:04 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 12:22:05 Check angles 12:22:05 SkyScan query 12:22:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 12:22:05 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 12:22:05 Check angles 12:22:05 SkyScan query 12:22:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:22:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:22:06 Message to Master queued w/err=0: serial=274362 error=0 12:22:11 Received message from Master: op=Filter serial=274363 12:22:11 Color wheel filter change from 0 to 0 12:22:11 FLIGetFilterPos err=0 currentPosition=0 12:22:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:11 Filter is already there-color wheel unchanged 12:22:11 Received message from Master: op=Shutter serial=274364 12:22:11 Shutter LASER close 12:22:11 Received message from Camera: op=State serial=274366 12:22:11 GetSingleValue result=40 Value=cccccccc 12:22:11 SkyScan query 12:22:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:22:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:12 Parameters OK 12:22:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:12 Set A/D data flow result=40 12:22:12 Set A/D channel type result=40 12:22:12 Set A/D encoding result=40 12:22:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:12 Set channel filter=0.000000e+000 result=40 12:22:12 Config A/D Result=40 12:22:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:12 Get A/D filter: -9.255963e+061 result=40 12:22:12 Get A/D value=-858993460 result=40 12:22:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:12 Parameters OK 12:22:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:12 Set A/D data flow result=40 12:22:12 Set A/D channel type result=40 12:22:12 Set A/D encoding result=40 12:22:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:12 Set channel filter=0.000000e+000 result=40 12:22:12 Config A/D Result=40 12:22:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:12 Get A/D filter: -9.255963e+061 result=40 12:22:12 Get A/D value=-858993460 result=40 12:22:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:12 Aux= 12:22:12 Message to Camera, serial 274366 queued 12:22:49 Received message from Master: op=PointingHead serial=274379 12:22:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:22:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:22:49 Point started: ret=0 12:22:49 point_skyscan result=0 12:22:50 Check angles 12:22:50 SkyScan query 12:22:50 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 12:22:50 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 12:22:51 Check angles 12:22:51 SkyScan query 12:22:51 SkyScan query done: ret=0 az=82.095<-5473 ze=66.495<-7567 Statuses=0009 0008 12:22:51 Msec=750 True Az=82.095 Ze=66.495 Az status=0009 Ze status=0008 12:22:51 Check angles 12:22:51 SkyScan query 12:22:52 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 12:22:52 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 12:22:52 Check angles 12:22:52 SkyScan query 12:22:53 SkyScan query done: ret=0 az=117.48<-7832 ze=66.495<-7567 Statuses=0009 0008 12:22:53 Msec=2250 True Az=117.48 Ze=66.495 Az status=0009 Ze status=0008 12:22:53 Check angles 12:22:53 SkyScan query 12:22:53 SkyScan query done: ret=0 az=135.315<-9021 ze=66.495<-7567 Statuses=0009 0008 12:22:53 Msec=3000 True Az=135.315 Ze=66.495 Az status=0009 Ze status=0008 12:22:54 Check angles 12:22:54 SkyScan query 12:22:54 SkyScan query done: ret=0 az=153.09<-10206 ze=66.495<-7567 Statuses=0009 0008 12:22:54 Msec=3750 True Az=153.09 Ze=66.495 Az status=0009 Ze status=0008 12:22:54 Check angles 12:22:54 SkyScan query 12:22:55 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:22:55 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:22:55 Message to Master queued w/err=0: serial=274379 error=0 12:23:00 Received message from Master: op=Filter serial=274380 12:23:00 Color wheel filter change from 0 to 0 12:23:00 FLIGetFilterPos err=0 currentPosition=0 12:23:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:00 Filter is already there-color wheel unchanged 12:23:00 Received message from Master: op=Shutter serial=274381 12:23:00 Shutter LASER close 12:23:00 Received message from Camera: op=State serial=274383 12:23:00 GetSingleValue result=40 Value=cccccccc 12:23:00 SkyScan query 12:23:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:23:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:01 Parameters OK 12:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:01 Set A/D data flow result=40 12:23:01 Set A/D channel type result=40 12:23:01 Set A/D encoding result=40 12:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:01 Set channel filter=0.000000e+000 result=40 12:23:01 Config A/D Result=40 12:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:01 Get A/D filter: -9.255963e+061 result=40 12:23:01 Get A/D value=-858993460 result=40 12:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:01 Parameters OK 12:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:01 Set A/D data flow result=40 12:23:01 Set A/D channel type result=40 12:23:01 Set A/D encoding result=40 12:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:01 Set channel filter=0.000000e+000 result=40 12:23:01 Config A/D Result=40 12:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:01 Get A/D filter: -9.255963e+061 result=40 12:23:01 Get A/D value=-858993460 result=40 12:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:01 Aux= 12:23:01 Message to Camera, serial 274383 queued 12:23:38 Received message from Master: op=PointingHead serial=274396 12:23:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:23:38 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:23:38 Point started: ret=0 12:23:38 point_skyscan result=0 12:23:39 Check angles 12:23:39 SkyScan query 12:23:39 SkyScan query done: ret=0 az=135.24<-9016 ze=36.93<-9538 Statuses=0009 0009 12:23:39 Msec=0 True Az=135.24 Ze=36.93 Az status=0009 Ze status=0009 12:23:40 Check angles 12:23:40 SkyScan query 12:23:40 SkyScan query done: ret=0 az=117.33<-7822 ze=15.66<-10956 Statuses=0009 0009 12:23:40 Msec=750 True Az=117.33 Ze=15.66 Az status=0009 Ze status=0009 12:23:40 Check angles 12:23:40 SkyScan query 12:23:41 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.325<-12355 Statuses=0009 0009 12:23:41 Msec=1500 True Az=99.915 Ze=-5.325 Az status=0009 Ze status=0009 12:23:41 Check angles 12:23:41 SkyScan query 12:23:42 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.28<-13752 Statuses=0009 0009 12:23:42 Msec=2250 True Az=82.485 Ze=-26.28 Az status=0009 Ze status=0009 12:23:42 Check angles 12:23:42 SkyScan query 12:23:42 SkyScan query done: ret=0 az=64.605<-4307 ze=-38.565<-14571 Statuses=0009 0008 12:23:42 Msec=3000 True Az=64.605 Ze=-38.565 Az status=0009 Ze status=0008 12:23:43 Check angles 12:23:43 SkyScan query 12:23:43 SkyScan query done: ret=0 az=47.145<-3143 ze=-38.535<-14569 Statuses=0009 0008 12:23:43 Msec=3750 True Az=47.145 Ze=-38.535 Az status=0009 Ze status=0008 12:23:43 Check angles 12:23:43 SkyScan query 12:23:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:23:44 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:23:44 Message to Master queued w/err=0: serial=274396 error=0 12:23:49 Received message from Master: op=Filter serial=274397 12:23:49 Color wheel filter change from 0 to 0 12:23:49 FLIGetFilterPos err=0 currentPosition=0 12:23:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:49 Filter is already there-color wheel unchanged 12:23:49 Received message from Master: op=Shutter serial=274398 12:23:49 Shutter LASER close 12:23:49 Received message from Camera: op=State serial=274400 12:23:49 GetSingleValue result=40 Value=cccccccc 12:23:49 SkyScan query 12:23:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:23:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:50 Parameters OK 12:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:50 Set A/D data flow result=40 12:23:50 Set A/D channel type result=40 12:23:50 Set A/D encoding result=40 12:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:50 Set channel filter=0.000000e+000 result=40 12:23:50 Config A/D Result=40 12:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:50 Get A/D filter: -9.255963e+061 result=40 12:23:50 Get A/D value=-858993460 result=40 12:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:50 Parameters OK 12:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:50 Set A/D data flow result=40 12:23:50 Set A/D channel type result=40 12:23:50 Set A/D encoding result=40 12:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:50 Set channel filter=0.000000e+000 result=40 12:23:50 Config A/D Result=40 12:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:50 Get A/D filter: -9.255963e+061 result=40 12:23:50 Get A/D value=-858993460 result=40 12:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:50 Aux= 12:23:50 Message to Camera, serial 274400 queued 12:24:26 Received message from Master: op=PointingHead serial=274412 12:24:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:24:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:24:26 Point started: ret=0 12:24:26 point_skyscan result=0 12:24:27 Check angles 12:24:27 SkyScan query 12:24:27 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.16<-16544 Statuses=0009 0009 12:24:27 Msec=0 True Az=63.885 Ze=-68.16 Az status=0009 Ze status=0009 12:24:27 Check angles 12:24:27 SkyScan query 12:24:28 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.16<-17944 Statuses=0009 0009 12:24:28 Msec=750 True Az=81.3 Ze=-89.16 Az status=0009 Ze status=0009 12:24:28 Check angles 12:24:28 SkyScan query 12:24:29 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.085<-19339 Statuses=0009 0009 12:24:29 Msec=1500 True Az=98.82 Ze=-110.085 Az status=0009 Ze status=0009 12:24:29 Check angles 12:24:29 SkyScan query 12:24:29 SkyScan query done: ret=0 az=116.16<-7744 ze=-131.055<-20737 Statuses=0009 0009 12:24:29 Msec=2250 True Az=116.16 Ze=-131.055 Az status=0009 Ze status=0009 12:24:30 Check angles 12:24:30 SkyScan query 12:24:30 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 12:24:30 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 12:24:30 Check angles 12:24:30 SkyScan query 12:24:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:24:31 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:24:31 Message to Master queued w/err=0: serial=274412 error=0 12:24:36 Received message from Master: op=Filter serial=274413 12:24:36 Color wheel filter change from 0 to 0 12:24:36 FLIGetFilterPos err=0 currentPosition=0 12:24:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:36 Filter is already there-color wheel unchanged 12:24:36 Received message from Master: op=Shutter serial=274414 12:24:36 Shutter LASER close 12:24:36 Received message from Camera: op=State serial=274416 12:24:36 GetSingleValue result=40 Value=cccccccc 12:24:36 SkyScan query 12:24:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:24:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:37 Parameters OK 12:24:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:37 Set A/D data flow result=40 12:24:37 Set A/D channel type result=40 12:24:37 Set A/D encoding result=40 12:24:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:37 Set channel filter=0.000000e+000 result=40 12:24:37 Config A/D Result=40 12:24:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:37 Get A/D filter: -9.255963e+061 result=40 12:24:37 Get A/D value=-858993460 result=40 12:24:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:37 Parameters OK 12:24:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:37 Set A/D data flow result=40 12:24:37 Set A/D channel type result=40 12:24:37 Set A/D encoding result=40 12:24:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:37 Set channel filter=0.000000e+000 result=40 12:24:37 Config A/D Result=40 12:24:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:37 Get A/D filter: -9.255963e+061 result=40 12:24:37 Get A/D value=-858993460 result=40 12:24:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:37 Aux= 12:24:37 Message to Camera, serial 274416 queued 12:25:14 Received message from Master: op=PointingHead serial=274429 12:25:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:25:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:25:14 Point started: ret=0 12:25:14 point_skyscan result=0 12:25:15 Check angles 12:25:15 SkyScan query 12:25:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 12:25:15 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 12:25:15 Check angles 12:25:15 SkyScan query 12:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:25:16 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:25:16 Message to Master queued w/err=0: serial=274429 error=0 12:25:21 Received message from Master: op=Filter serial=274430 12:25:21 Color wheel filter change from 0 to 0 12:25:21 FLIGetFilterPos err=0 currentPosition=0 12:25:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:21 Filter is already there-color wheel unchanged 12:25:21 Received message from Master: op=Shutter serial=274431 12:25:21 Shutter LASER open 12:25:21 Received message from Camera: op=State serial=274433 12:25:21 GetSingleValue result=40 Value=cccccccc 12:25:21 SkyScan query 12:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:25:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:22 Parameters OK 12:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:22 Set A/D data flow result=40 12:25:22 Set A/D channel type result=40 12:25:22 Set A/D encoding result=40 12:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:22 Set channel filter=0.000000e+000 result=40 12:25:22 Config A/D Result=40 12:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:22 Get A/D filter: -9.255963e+061 result=40 12:25:22 Get A/D value=-858993460 result=40 12:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:22 Parameters OK 12:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:22 Set A/D data flow result=40 12:25:22 Set A/D channel type result=40 12:25:22 Set A/D encoding result=40 12:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:22 Set channel filter=0.000000e+000 result=40 12:25:22 Config A/D Result=40 12:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:22 Get A/D filter: -9.255963e+061 result=40 12:25:22 Get A/D value=-858993460 result=40 12:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:22 Aux= 12:25:22 Message to Camera, serial 274433 queued 12:25:30 Received message from Master: op=Shutter serial=274443 12:25:30 Shutter LASER close 12:25:31 Received message from Master: op=PointingHead serial=274447 12:25:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:25:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:25:31 Point started: ret=0 12:25:31 point_skyscan result=0 12:25:32 Check angles 12:25:32 SkyScan query 12:25:33 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.295<-21553 Statuses=0009 0009 12:25:33 Msec=0 True Az=136.11 Ze=-143.295 Az status=0009 Ze status=0009 12:25:33 Check angles 12:25:33 SkyScan query 12:25:34 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.295<-20153 Statuses=0009 0009 12:25:34 Msec=750 True Az=153.51 Ze=-122.295 Az status=0009 Ze status=0009 12:25:34 Check angles 12:25:34 SkyScan query 12:25:34 SkyScan query done: ret=0 az=171<-11400 ze=-101.43<-18762 Statuses=0009 0009 12:25:34 Msec=1500 True Az=171 Ze=-101.43 Az status=0009 Ze status=0009 12:25:34 Check angles 12:25:34 SkyScan query 12:25:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.4<-17360 Statuses=0008 0009 12:25:35 Msec=2250 True Az=176.01 Ze=-80.4 Az status=0008 Ze status=0009 12:25:35 Check angles 12:25:35 SkyScan query 12:25:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.49<-15966 Statuses=0008 0009 12:25:36 Msec=3000 True Az=175.995 Ze=-59.49 Az status=0008 Ze status=0009 12:25:36 Check angles 12:25:36 SkyScan query 12:25:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 12:25:37 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 12:25:37 Message to Master queued w/err=0: serial=274447 error=0 12:25:42 Received message from Master: op=Filter serial=274448 12:25:42 Color wheel filter change from 0 to 0 12:25:42 FLIGetFilterPos err=0 currentPosition=0 12:25:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:42 Filter is already there-color wheel unchanged 12:25:42 Received message from Master: op=Shutter serial=274449 12:25:42 Shutter LASER close [UTC 2018-12-19 12:25:42] 12:25:42 Received message from Camera: op=State serial=274451 12:25:42 GetSingleValue result=40 Value=cccccccc 12:25:42 SkyScan query 12:25:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:25:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:42 Parameters OK 12:25:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:42 Set A/D data flow result=40 12:25:42 Set A/D channel type result=40 12:25:42 Set A/D encoding result=40 12:25:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:42 Set channel filter=0.000000e+000 result=40 12:25:42 Config A/D Result=40 12:25:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:42 Get A/D filter: -9.255963e+061 result=40 12:25:42 Get A/D value=-858993460 result=40 12:25:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:42 Parameters OK 12:25:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:42 Set A/D data flow result=40 12:25:42 Set A/D channel type result=40 12:25:42 Set A/D encoding result=40 12:25:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:42 Set channel filter=0.000000e+000 result=40 12:25:42 Config A/D Result=40 12:25:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:42 Get A/D filter: -9.255963e+061 result=40 12:25:42 Get A/D value=-858993460 result=40 12:25:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:42 Aux= 12:25:42 Message to Camera, serial 274451 queued 12:26:19 Received message from Master: op=PointingHead serial=274464 12:26:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:26:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:26:20 Point started: ret=0 12:26:20 point_skyscan result=0 12:26:20 Check angles 12:26:20 SkyScan query 12:26:21 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.63<-13442 Statuses=0009 0009 12:26:21 Msec=0 True Az=152.91 Ze=-21.63 Az status=0009 Ze status=0009 12:26:21 Check angles 12:26:21 SkyScan query 12:26:22 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.615<-12041 Statuses=0009 0009 12:26:22 Msec=750 True Az=135.375 Ze=-0.615 Az status=0009 Ze status=0009 12:26:22 Check angles 12:26:22 SkyScan query 12:26:22 SkyScan query done: ret=0 az=117.915<-7861 ze=20.28<-10648 Statuses=0009 0009 12:26:22 Msec=1500 True Az=117.915 Ze=20.28 Az status=0009 Ze status=0009 12:26:23 Check angles 12:26:23 SkyScan query 12:26:23 SkyScan query done: ret=0 az=100.455<-6697 ze=41.31<-9246 Statuses=0009 0009 12:26:23 Msec=2250 True Az=100.455 Ze=41.31 Az status=0009 Ze status=0009 12:26:23 Check angles 12:26:23 SkyScan query 12:26:24 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 12:26:24 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 12:26:24 Check angles 12:26:24 SkyScan query 12:26:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:26:25 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 12:26:25 Message to Master queued w/err=0: serial=274464 error=0 12:26:30 Received message from Master: op=Filter serial=274465 12:26:30 Color wheel filter change from 0 to 0 12:26:30 FLIGetFilterPos err=0 currentPosition=0 12:26:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:30 Filter is already there-color wheel unchanged 12:26:30 Received message from Master: op=Shutter serial=274466 12:26:30 Shutter LASER close 12:26:30 Received message from Camera: op=State serial=274468 12:26:30 GetSingleValue result=40 Value=cccccccc 12:26:30 SkyScan query 12:26:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:26:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:30 Parameters OK 12:26:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:30 Set A/D data flow result=40 12:26:30 Set A/D channel type result=40 12:26:30 Set A/D encoding result=40 12:26:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:30 Set channel filter=0.000000e+000 result=40 12:26:30 Config A/D Result=40 12:26:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:30 Get A/D filter: -9.255963e+061 result=40 12:26:30 Get A/D value=-858993460 result=40 12:26:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:30 Parameters OK 12:26:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:30 Set A/D data flow result=40 12:26:30 Set A/D channel type result=40 12:26:30 Set A/D encoding result=40 12:26:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:30 Set channel filter=0.000000e+000 result=40 12:26:30 Config A/D Result=40 12:26:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:30 Get A/D filter: -9.255963e+061 result=40 12:26:30 Get A/D value=-858993460 result=40 12:26:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:30 Aux= 12:26:30 Message to Camera, serial 274468 queued 12:27:07 Received message from Master: op=PointingHead serial=274481 12:27:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:27:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:27:08 Point started: ret=0 12:27:08 point_skyscan result=0 12:27:08 Check angles 12:27:08 SkyScan query 12:27:09 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 12:27:09 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 12:27:09 Check angles 12:27:09 SkyScan query 12:27:10 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 12:27:10 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 12:27:10 Check angles 12:27:10 SkyScan query 12:27:10 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 12:27:10 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 12:27:11 Check angles 12:27:11 SkyScan query 12:27:11 SkyScan query done: ret=0 az=161.835<-10789 ze=38.505<-9433 Statuses=0009 0008 12:27:11 Msec=2250 True Az=161.835 Ze=38.505 Az status=0009 Ze status=0008 12:27:11 Check angles 12:27:11 SkyScan query 12:27:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:27:12 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:27:12 Check angles 12:27:12 SkyScan query 12:27:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:27:13 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:27:13 Message to Master queued w/err=0: serial=274481 error=0 12:27:18 Received message from Master: op=Filter serial=274482 12:27:18 Color wheel filter change from 0 to 0 12:27:18 FLIGetFilterPos err=0 currentPosition=0 12:27:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:18 Filter is already there-color wheel unchanged 12:27:18 Received message from Master: op=Shutter serial=274483 12:27:18 Shutter LASER close 12:27:18 Received message from Camera: op=State serial=274485 12:27:18 GetSingleValue result=40 Value=cccccccc 12:27:18 SkyScan query 12:27:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:27:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:19 Parameters OK 12:27:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:19 Set A/D data flow result=40 12:27:19 Set A/D channel type result=40 12:27:19 Set A/D encoding result=40 12:27:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:19 Set channel filter=0.000000e+000 result=40 12:27:19 Config A/D Result=40 12:27:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:19 Get A/D filter: -9.255963e+061 result=40 12:27:19 Get A/D value=-858993460 result=40 12:27:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:19 Parameters OK 12:27:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:19 Set A/D data flow result=40 12:27:19 Set A/D channel type result=40 12:27:19 Set A/D encoding result=40 12:27:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:19 Set channel filter=0.000000e+000 result=40 12:27:19 Config A/D Result=40 12:27:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:19 Get A/D filter: -9.255963e+061 result=40 12:27:19 Get A/D value=-858993460 result=40 12:27:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:19 Aux= 12:27:19 Message to Camera, serial 274485 queued 12:27:56 Received message from Master: op=PointingHead serial=274498 12:27:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:27:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:27:56 Point started: ret=0 12:27:56 point_skyscan result=0 12:27:57 Check angles 12:27:57 SkyScan query 12:27:57 SkyScan query done: ret=0 az=152.97<-10198 ze=68.37<-7442 Statuses=0009 0009 12:27:57 Msec=0 True Az=152.97 Ze=68.37 Az status=0009 Ze status=0009 12:27:57 Check angles 12:27:57 SkyScan query 12:27:58 SkyScan query done: ret=0 az=135.375<-9025 ze=89.385<-6041 Statuses=0009 0009 12:27:58 Msec=750 True Az=135.375 Ze=89.385 Az status=0009 Ze status=0009 12:27:58 Check angles 12:27:58 SkyScan query 12:27:59 SkyScan query done: ret=0 az=118.035<-7869 ze=110.295<-4647 Statuses=0009 0009 12:27:59 Msec=1500 True Az=118.035 Ze=110.295 Az status=0009 Ze status=0009 12:27:59 Check angles 12:27:59 SkyScan query 12:27:59 SkyScan query done: ret=0 az=112.995<-7533 ze=131.265<-3249 Statuses=0008 0009 12:27:59 Msec=2250 True Az=112.995 Ze=131.265 Az status=0008 Ze status=0009 12:28:00 Check angles 12:28:00 SkyScan query 12:28:00 SkyScan query done: ret=0 az=112.995<-7533 ze=152.58<-1828 Statuses=0008 0009 12:28:00 Msec=3000 True Az=112.995 Ze=152.58 Az status=0008 Ze status=0009 12:28:00 Check angles 12:28:00 SkyScan query 12:28:01 SkyScan query done: ret=0 az=112.995<-7533 ze=173.985<-401 Statuses=0008 0009 12:28:01 Msec=3750 True Az=112.995 Ze=173.985 Az status=0008 Ze status=0009 12:28:01 Check angles 12:28:01 SkyScan query 12:28:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 12:28:02 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 12:28:02 Message to Master queued w/err=0: serial=274498 error=0 12:28:07 Received message from Master: op=Filter serial=274499 12:28:07 Color wheel filter change from 0 to 0 12:28:07 FLIGetFilterPos err=0 currentPosition=0 12:28:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:07 Filter is already there-color wheel unchanged 12:28:07 Received message from Master: op=Shutter serial=274500 12:28:07 Shutter LASER open 12:28:07 Received message from Camera: op=State serial=274502 12:28:07 GetSingleValue result=40 Value=cccccccc 12:28:07 SkyScan query 12:28:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:28:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:08 Parameters OK 12:28:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:08 Set A/D data flow result=40 12:28:08 Set A/D channel type result=40 12:28:08 Set A/D encoding result=40 12:28:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:08 Set channel filter=0.000000e+000 result=40 12:28:08 Config A/D Result=40 12:28:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:08 Get A/D filter: -9.255963e+061 result=40 12:28:08 Get A/D value=-858993460 result=40 12:28:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:08 Parameters OK 12:28:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:08 Set A/D data flow result=40 12:28:08 Set A/D channel type result=40 12:28:08 Set A/D encoding result=40 12:28:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:08 Set channel filter=0.000000e+000 result=40 12:28:08 Config A/D Result=40 12:28:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:08 Get A/D filter: -9.255963e+061 result=40 12:28:08 Get A/D value=-858993460 result=40 12:28:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:08 Aux= 12:28:08 Message to Camera, serial 274502 queued 12:28:15 Received message from Master: op=Shutter serial=274511 12:28:15 Shutter LASER close 12:28:16 Received message from Master: op=PointingHead serial=274515 12:28:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:28:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:28:16 Point started: ret=0 12:28:16 point_skyscan result=0 12:28:17 Check angles 12:28:17 SkyScan query 12:28:17 SkyScan query done: ret=0 az=89.28<-5952 ze=156.855<-1543 Statuses=0009 0009 12:28:17 Msec=0 True Az=89.28 Ze=156.855 Az status=0009 Ze status=0009 12:28:18 Check angles 12:28:18 SkyScan query 12:28:18 SkyScan query done: ret=0 az=71.715<-4781 ze=135.48<-2968 Statuses=0009 0009 12:28:18 Msec=750 True Az=71.715 Ze=135.48 Az status=0009 Ze status=0009 12:28:18 Check angles 12:28:18 SkyScan query 12:28:19 SkyScan query done: ret=0 az=54.045<-3603 ze=114.45<-4370 Statuses=0009 0009 12:28:19 Msec=1500 True Az=54.045 Ze=114.45 Az status=0009 Ze status=0009 12:28:19 Check angles 12:28:19 SkyScan query 12:28:20 SkyScan query done: ret=0 az=40.995<-2733 ze=93.555<-5763 Statuses=0009 0009 12:28:20 Msec=2250 True Az=40.995 Ze=93.555 Az status=0009 Ze status=0009 12:28:20 Check angles 12:28:20 SkyScan query 12:28:20 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 12:28:20 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 12:28:21 Check angles 12:28:21 SkyScan query 12:28:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 12:28:21 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 12:28:21 Check angles 12:28:21 SkyScan query 12:28:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:28:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:28:22 Message to Master queued w/err=0: serial=274515 error=0 12:28:27 Received message from Master: op=Filter serial=274516 12:28:27 Color wheel filter change from 0 to 0 12:28:27 FLIGetFilterPos err=0 currentPosition=0 12:28:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:27 Filter is already there-color wheel unchanged 12:28:27 Received message from Master: op=Shutter serial=274517 12:28:27 Shutter LASER close 12:28:27 Received message from Camera: op=State serial=274519 12:28:27 GetSingleValue result=40 Value=cccccccc 12:28:27 SkyScan query 12:28:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:28:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:28 Parameters OK 12:28:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:28 Set A/D data flow result=40 12:28:28 Set A/D channel type result=40 12:28:28 Set A/D encoding result=40 12:28:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:28 Set channel filter=0.000000e+000 result=40 12:28:28 Config A/D Result=40 12:28:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:28 Get A/D filter: -9.255963e+061 result=40 12:28:28 Get A/D value=-858993460 result=40 12:28:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:28 Parameters OK 12:28:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:28 Set A/D data flow result=40 12:28:28 Set A/D channel type result=40 12:28:28 Set A/D encoding result=40 12:28:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:28 Set channel filter=0.000000e+000 result=40 12:28:28 Config A/D Result=40 12:28:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:28 Get A/D filter: -9.255963e+061 result=40 12:28:28 Get A/D value=-858993460 result=40 12:28:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:28 Aux= 12:28:28 Message to Camera, serial 274519 queued 12:29:05 Received message from Master: op=PointingHead serial=274532 12:29:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:29:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:29:05 Point started: ret=0 12:29:05 point_skyscan result=0 12:29:06 Check angles 12:29:06 SkyScan query 12:29:06 SkyScan query done: ret=0 az=63.735<-4249 ze=66.555<-7563 Statuses=0009 0008 12:29:06 Msec=0 True Az=63.735 Ze=66.555 Az status=0009 Ze status=0008 12:29:06 Check angles 12:29:06 SkyScan query 12:29:07 SkyScan query done: ret=0 az=81.09<-5406 ze=66.495<-7567 Statuses=0009 0008 12:29:07 Msec=750 True Az=81.09 Ze=66.495 Az status=0009 Ze status=0008 12:29:07 Check angles 12:29:07 SkyScan query 12:29:08 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 12:29:08 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 12:29:08 Check angles 12:29:08 SkyScan query 12:29:09 SkyScan query done: ret=0 az=116.55<-7770 ze=66.495<-7567 Statuses=0009 0008 12:29:09 Msec=2250 True Az=116.55 Ze=66.495 Az status=0009 Ze status=0008 12:29:09 Check angles 12:29:09 SkyScan query 12:29:09 SkyScan query done: ret=0 az=133.965<-8931 ze=66.495<-7567 Statuses=0009 0008 12:29:09 Msec=3000 True Az=133.965 Ze=66.495 Az status=0009 Ze status=0008 12:29:09 Check angles 12:29:09 SkyScan query 12:29:10 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 12:29:10 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 12:29:10 Check angles 12:29:10 SkyScan query 12:29:11 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:29:11 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:29:11 Message to Master queued w/err=0: serial=274532 error=0 12:29:16 Received message from Master: op=Filter serial=274533 12:29:16 Color wheel filter change from 0 to 0 12:29:16 FLIGetFilterPos err=0 currentPosition=0 12:29:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:16 Filter is already there-color wheel unchanged 12:29:16 Received message from Master: op=Shutter serial=274534 12:29:16 Shutter LASER close 12:29:16 Received message from Camera: op=State serial=274536 12:29:16 GetSingleValue result=40 Value=cccccccc 12:29:16 SkyScan query 12:29:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:29:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:17 Parameters OK 12:29:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:17 Set A/D data flow result=40 12:29:17 Set A/D channel type result=40 12:29:17 Set A/D encoding result=40 12:29:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:17 Set channel filter=0.000000e+000 result=40 12:29:17 Config A/D Result=40 12:29:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:17 Get A/D filter: -9.255963e+061 result=40 12:29:17 Get A/D value=-858993460 result=40 12:29:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:17 Parameters OK 12:29:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:17 Set A/D data flow result=40 12:29:17 Set A/D channel type result=40 12:29:17 Set A/D encoding result=40 12:29:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:17 Set channel filter=0.000000e+000 result=40 12:29:17 Config A/D Result=40 12:29:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:17 Get A/D filter: -9.255963e+061 result=40 12:29:17 Get A/D value=-858993460 result=40 12:29:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:17 Aux= 12:29:17 Message to Camera, serial 274536 queued 12:29:53 Received message from Master: op=PointingHead serial=274549 12:29:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:29:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:29:54 Point started: ret=0 12:29:54 point_skyscan result=0 12:29:55 Check angles 12:29:55 SkyScan query 12:29:55 SkyScan query done: ret=0 az=134.745<-8983 ze=36.405<-9573 Statuses=0009 0009 12:29:55 Msec=0 True Az=134.745 Ze=36.405 Az status=0009 Ze status=0009 12:29:55 Check angles 12:29:55 SkyScan query 12:29:56 SkyScan query done: ret=0 az=117.285<-7819 ze=15.495<-10967 Statuses=0009 0009 12:29:56 Msec=750 True Az=117.285 Ze=15.495 Az status=0009 Ze status=0009 12:29:56 Check angles 12:29:56 SkyScan query 12:29:57 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.505<-12367 Statuses=0009 0009 12:29:57 Msec=1500 True Az=99.885 Ze=-5.505 Az status=0009 Ze status=0009 12:29:57 Check angles 12:29:57 SkyScan query 12:29:57 SkyScan query done: ret=0 az=82.305<-5487 ze=-26.49<-13766 Statuses=0009 0009 12:29:57 Msec=2250 True Az=82.305 Ze=-26.49 Az status=0009 Ze status=0009 12:29:58 Check angles 12:29:58 SkyScan query 12:29:58 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.565<-14571 Statuses=0009 0008 12:29:58 Msec=3000 True Az=64.86 Ze=-38.565 Az status=0009 Ze status=0008 12:29:58 Check angles 12:29:58 SkyScan query 12:29:59 SkyScan query done: ret=0 az=47.37<-3158 ze=-38.535<-14569 Statuses=0009 0008 12:29:59 Msec=3750 True Az=47.37 Ze=-38.535 Az status=0009 Ze status=0008 12:29:59 Check angles 12:29:59 SkyScan query 12:30:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:30:00 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:30:00 Message to Master queued w/err=0: serial=274549 error=0 12:30:05 Received message from Master: op=Filter serial=274550 12:30:05 Color wheel filter change from 0 to 0 12:30:05 FLIGetFilterPos err=0 currentPosition=0 12:30:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:05 Filter is already there-color wheel unchanged 12:30:05 Received message from Master: op=Shutter serial=274551 12:30:05 Shutter LASER close 12:30:05 Received message from Camera: op=State serial=274553 12:30:05 GetSingleValue result=40 Value=cccccccc 12:30:05 SkyScan query 12:30:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:30:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:05 Parameters OK 12:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:05 Set A/D data flow result=40 12:30:05 Set A/D channel type result=40 12:30:05 Set A/D encoding result=40 12:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:05 Set channel filter=0.000000e+000 result=40 12:30:05 Config A/D Result=40 12:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:05 Get A/D filter: -9.255963e+061 result=40 12:30:05 Get A/D value=-858993460 result=40 12:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:05 Parameters OK 12:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:05 Set A/D data flow result=40 12:30:05 Set A/D channel type result=40 12:30:05 Set A/D encoding result=40 12:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:05 Set channel filter=0.000000e+000 result=40 12:30:05 Config A/D Result=40 12:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:05 Get A/D filter: -9.255963e+061 result=40 12:30:05 Get A/D value=-858993460 result=40 12:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:05 Aux= 12:30:05 Message to Camera, serial 274553 queued 12:30:42 Received message from Master: op=PointingHead serial=274566 12:30:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:30:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:30:43 Point started: ret=0 12:30:43 point_skyscan result=0 12:30:43 Check angles 12:30:43 SkyScan query 12:30:44 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.115<-16541 Statuses=0009 0009 12:30:44 Msec=0 True Az=63.87 Ze=-68.115 Az status=0009 Ze status=0009 12:30:44 Check angles 12:30:44 SkyScan query 12:30:45 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.115<-17941 Statuses=0009 0009 12:30:45 Msec=750 True Az=81.345 Ze=-89.115 Az status=0009 Ze status=0009 12:30:45 Check angles 12:30:45 SkyScan query 12:30:45 SkyScan query done: ret=0 az=98.805<-6587 ze=-109.995<-19333 Statuses=0009 0009 12:30:45 Msec=1500 True Az=98.805 Ze=-109.995 Az status=0009 Ze status=0009 12:30:46 Check angles 12:30:46 SkyScan query 12:30:46 SkyScan query done: ret=0 az=116.19<-7746 ze=-130.995<-20733 Statuses=0009 0009 12:30:46 Msec=2250 True Az=116.19 Ze=-130.995 Az status=0009 Ze status=0009 12:30:46 Check angles 12:30:46 SkyScan query 12:30:47 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 12:30:47 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 12:30:47 Check angles 12:30:47 SkyScan query 12:30:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:30:48 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:30:48 Message to Master queued w/err=0: serial=274566 error=0 12:30:53 Received message from Master: op=Filter serial=274567 12:30:53 Color wheel filter change from 0 to 0 12:30:53 FLIGetFilterPos err=0 currentPosition=0 12:30:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:53 Filter is already there-color wheel unchanged 12:30:53 Received message from Master: op=Shutter serial=274568 12:30:53 Shutter LASER close 12:30:53 Received message from Camera: op=State serial=274570 12:30:53 GetSingleValue result=40 Value=cccccccc 12:30:53 SkyScan query 12:30:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:30:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:54 Parameters OK 12:30:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:54 Set A/D data flow result=40 12:30:54 Set A/D channel type result=40 12:30:54 Set A/D encoding result=40 12:30:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:54 Set channel filter=0.000000e+000 result=40 12:30:54 Config A/D Result=40 12:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:54 Get A/D filter: -9.255963e+061 result=40 12:30:54 Get A/D value=-858993460 result=40 12:30:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:54 Parameters OK 12:30:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:54 Set A/D data flow result=40 12:30:54 Set A/D channel type result=40 12:30:54 Set A/D encoding result=40 12:30:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:54 Set channel filter=0.000000e+000 result=40 12:30:54 Config A/D Result=40 12:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:54 Get A/D filter: -9.255963e+061 result=40 12:30:54 Get A/D value=-858993460 result=40 12:30:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:54 Aux= 12:30:54 Message to Camera, serial 274570 queued 12:31:30 Received message from Master: op=PointingHead serial=274583 12:31:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:31:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:31:31 Point started: ret=0 12:31:31 point_skyscan result=0 12:31:31 Check angles 12:31:31 SkyScan query 12:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0009 0009 12:31:32 Msec=0 True Az=112.995 Ze=-171 Az status=0009 Ze status=0009 12:31:32 Check angles 12:31:32 SkyScan query 12:31:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:31:33 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:31:33 Message to Master queued w/err=0: serial=274583 error=0 12:31:38 Received message from Master: op=Filter serial=274584 12:31:38 Color wheel filter change from 0 to 0 12:31:38 FLIGetFilterPos err=0 currentPosition=0 12:31:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:38 Filter is already there-color wheel unchanged 12:31:38 Received message from Master: op=Shutter serial=274585 12:31:38 Shutter LASER open 12:31:38 Received message from Camera: op=State serial=274587 12:31:38 GetSingleValue result=40 Value=cccccccc 12:31:38 SkyScan query 12:31:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:31:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:39 Parameters OK 12:31:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:39 Set A/D data flow result=40 12:31:39 Set A/D channel type result=40 12:31:39 Set A/D encoding result=40 12:31:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:39 Set channel filter=0.000000e+000 result=40 12:31:39 Config A/D Result=40 12:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:39 Get A/D filter: -9.255963e+061 result=40 12:31:39 Get A/D value=-858993460 result=40 12:31:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:39 Parameters OK 12:31:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:39 Set A/D data flow result=40 12:31:39 Set A/D channel type result=40 12:31:39 Set A/D encoding result=40 12:31:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:39 Set channel filter=0.000000e+000 result=40 12:31:39 Config A/D Result=40 12:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:39 Get A/D filter: -9.255963e+061 result=40 12:31:39 Get A/D value=-858993460 result=40 12:31:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:39 Aux= 12:31:39 Message to Camera, serial 274587 queued 12:31:47 Received message from Master: op=Shutter serial=274597 12:31:47 Shutter LASER close 12:31:48 Received message from Master: op=PointingHead serial=274601 12:31:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:31:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:31:48 Point started: ret=0 12:31:48 point_skyscan result=0 12:31:49 Check angles 12:31:49 SkyScan query 12:31:49 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.31<-21554 Statuses=0009 0009 12:31:49 Msec=0 True Az=136.11 Ze=-143.31 Az status=0009 Ze status=0009 12:31:50 Check angles 12:31:50 SkyScan query 12:31:50 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.31<-20154 Statuses=0009 0009 12:31:50 Msec=750 True Az=153.48 Ze=-122.31 Az status=0009 Ze status=0009 12:31:50 Check angles 12:31:50 SkyScan query 12:31:51 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.43<-18762 Statuses=0009 0009 12:31:51 Msec=1500 True Az=170.97 Ze=-101.43 Az status=0009 Ze status=0009 12:31:51 Check angles 12:31:51 SkyScan query 12:31:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 12:31:52 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 12:31:52 Check angles 12:31:52 SkyScan query 12:31:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.995<-15933 Statuses=0008 0009 12:31:52 Msec=3000 True Az=176.01 Ze=-58.995 Az status=0008 Ze status=0009 12:31:53 Check angles 12:31:53 SkyScan query 12:31:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:31:53 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:31:53 Message to Master queued w/err=0: serial=274601 error=0 12:31:58 Received message from Master: op=Filter serial=274602 12:31:58 Color wheel filter change from 0 to 0 12:31:58 FLIGetFilterPos err=0 currentPosition=0 12:31:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:58 Filter is already there-color wheel unchanged 12:31:58 Received message from Master: op=Shutter serial=274603 12:31:58 Shutter LASER close 12:31:58 Received message from Camera: op=State serial=274605 12:31:58 GetSingleValue result=40 Value=cccccccc 12:31:58 SkyScan query 12:31:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:31:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:59 Parameters OK 12:31:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:59 Set A/D data flow result=40 12:31:59 Set A/D channel type result=40 12:31:59 Set A/D encoding result=40 12:31:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:59 Set channel filter=0.000000e+000 result=40 12:31:59 Config A/D Result=40 12:31:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:59 Get A/D filter: -9.255963e+061 result=40 12:31:59 Get A/D value=-858993460 result=40 12:31:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:59 Parameters OK 12:31:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:59 Set A/D data flow result=40 12:31:59 Set A/D channel type result=40 12:31:59 Set A/D encoding result=40 12:31:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:59 Set channel filter=0.000000e+000 result=40 12:31:59 Config A/D Result=40 12:31:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:59 Get A/D filter: -9.255963e+061 result=40 12:31:59 Get A/D value=-858993460 result=40 12:31:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:59 Aux= 12:31:59 Message to Camera, serial 274605 queued 12:32:36 Received message from Master: op=PointingHead serial=274618 12:32:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:32:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:32:36 Point started: ret=0 12:32:36 point_skyscan result=0 12:32:37 Check angles 12:32:37 SkyScan query 12:32:38 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.645<-13443 Statuses=0009 0009 12:32:38 Msec=0 True Az=152.955 Ze=-21.645 Az status=0009 Ze status=0009 12:32:38 Check angles 12:32:38 SkyScan query 12:32:38 SkyScan query done: ret=0 az=134.895<-8993 ze=-0.24<-12016 Statuses=0009 0009 12:32:38 Msec=750 True Az=134.895 Ze=-0.24 Az status=0009 Ze status=0009 12:32:38 Check angles 12:32:38 SkyScan query 12:32:39 SkyScan query done: ret=0 az=117.57<-7838 ze=20.745<-10617 Statuses=0009 0009 12:32:39 Msec=1500 True Az=117.57 Ze=20.745 Az status=0009 Ze status=0009 12:32:39 Check angles 12:32:39 SkyScan query 12:32:40 SkyScan query done: ret=0 az=100.215<-6681 ze=41.67<-9222 Statuses=0009 0009 12:32:40 Msec=2250 True Az=100.215 Ze=41.67 Az status=0009 Ze status=0009 12:32:40 Check angles 12:32:40 SkyScan query 12:32:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 12:32:41 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 12:32:41 Check angles 12:32:41 SkyScan query 12:32:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:32:41 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 12:32:41 Message to Master queued w/err=0: serial=274618 error=0 12:32:46 Received message from Master: op=Filter serial=274619 12:32:46 Color wheel filter change from 0 to 0 12:32:46 FLIGetFilterPos err=0 currentPosition=0 12:32:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:46 Filter is already there-color wheel unchanged 12:32:46 Received message from Master: op=Shutter serial=274620 12:32:46 Shutter LASER close 12:32:47 Received message from Camera: op=State serial=274622 12:32:47 GetSingleValue result=40 Value=cccccccc 12:32:47 SkyScan query 12:32:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:32:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:47 Parameters OK 12:32:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:47 Set A/D data flow result=40 12:32:47 Set A/D channel type result=40 12:32:47 Set A/D encoding result=40 12:32:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:47 Set channel filter=0.000000e+000 result=40 12:32:47 Config A/D Result=40 12:32:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:47 Get A/D filter: -9.255963e+061 result=40 12:32:47 Get A/D value=-858993460 result=40 12:32:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:47 Parameters OK 12:32:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:47 Set A/D data flow result=40 12:32:47 Set A/D channel type result=40 12:32:47 Set A/D encoding result=40 12:32:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:47 Set channel filter=0.000000e+000 result=40 12:32:47 Config A/D Result=40 12:32:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:47 Get A/D filter: -9.255963e+061 result=40 12:32:47 Get A/D value=-858993460 result=40 12:32:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:47 Aux= 12:32:47 Message to Camera, serial 274622 queued 12:33:24 Received message from Master: op=PointingHead serial=274635 12:33:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:33:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:33:24 Point started: ret=0 12:33:24 point_skyscan result=0 12:33:25 Check angles 12:33:25 SkyScan query 12:33:26 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 12:33:26 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 12:33:26 Check angles 12:33:26 SkyScan query 12:33:26 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 12:33:26 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 12:33:27 Check angles 12:33:27 SkyScan query 12:33:27 SkyScan query done: ret=0 az=143.76<-9584 ze=38.505<-9433 Statuses=0009 0008 12:33:27 Msec=1500 True Az=143.76 Ze=38.505 Az status=0009 Ze status=0008 12:33:27 Check angles 12:33:27 SkyScan query 12:33:28 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 12:33:28 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 12:33:28 Check angles 12:33:28 SkyScan query 12:33:29 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:33:29 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:33:29 Check angles 12:33:29 SkyScan query 12:33:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:33:29 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:33:29 Message to Master queued w/err=0: serial=274635 error=0 12:33:34 Received message from Master: op=Filter serial=274636 12:33:34 Color wheel filter change from 0 to 0 12:33:34 FLIGetFilterPos err=0 currentPosition=0 12:33:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:34 Filter is already there-color wheel unchanged 12:33:35 Received message from Master: op=Shutter serial=274637 12:33:35 Shutter LASER close 12:33:35 Received message from Camera: op=State serial=274639 12:33:35 GetSingleValue result=40 Value=cccccccc 12:33:35 SkyScan query 12:33:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:33:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:35 Parameters OK 12:33:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:35 Set A/D data flow result=40 12:33:35 Set A/D channel type result=40 12:33:35 Set A/D encoding result=40 12:33:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:35 Set channel filter=0.000000e+000 result=40 12:33:35 Config A/D Result=40 12:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:35 Get A/D filter: -9.255963e+061 result=40 12:33:35 Get A/D value=-858993460 result=40 12:33:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:35 Parameters OK 12:33:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:35 Set A/D data flow result=40 12:33:35 Set A/D channel type result=40 12:33:35 Set A/D encoding result=40 12:33:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:35 Set channel filter=0.000000e+000 result=40 12:33:35 Config A/D Result=40 12:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:35 Get A/D filter: -9.255963e+061 result=40 12:33:35 Get A/D value=-858993460 result=40 12:33:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:35 Aux= 12:33:35 Message to Camera, serial 274639 queued 12:34:12 Received message from Master: op=PointingHead serial=274652 12:34:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:34:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:34:12 Point started: ret=0 12:34:12 point_skyscan result=0 12:34:13 Check angles 12:34:13 SkyScan query 12:34:14 SkyScan query done: ret=0 az=153.165<-10211 ze=68.085<-7461 Statuses=0009 0009 12:34:14 Msec=0 True Az=153.165 Ze=68.085 Az status=0009 Ze status=0009 12:34:14 Check angles 12:34:14 SkyScan query 12:34:15 SkyScan query done: ret=0 az=135.72<-9048 ze=89.055<-6063 Statuses=0009 0009 12:34:15 Msec=750 True Az=135.72 Ze=89.055 Az status=0009 Ze status=0009 12:34:15 Check angles 12:34:15 SkyScan query 12:34:15 SkyScan query done: ret=0 az=117.87<-7858 ze=110.415<-4639 Statuses=0009 0009 12:34:15 Msec=1500 True Az=117.87 Ze=110.415 Az status=0009 Ze status=0009 12:34:16 Check angles 12:34:16 SkyScan query 12:34:16 SkyScan query done: ret=0 az=112.98<-7532 ze=131.805<-3213 Statuses=0008 0009 12:34:16 Msec=2250 True Az=112.98 Ze=131.805 Az status=0008 Ze status=0009 12:34:16 Check angles 12:34:16 SkyScan query 12:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=152.73<-1818 Statuses=0008 0009 12:34:17 Msec=3000 True Az=112.995 Ze=152.73 Az status=0008 Ze status=0009 12:34:17 Check angles 12:34:17 SkyScan query 12:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=173.7<-420 Statuses=0008 0009 12:34:18 Msec=3750 True Az=112.995 Ze=173.7 Az status=0008 Ze status=0009 12:34:18 Check angles 12:34:18 SkyScan query 12:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 12:34:18 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 12:34:18 Message to Master queued w/err=0: serial=274652 error=0 12:34:23 Received message from Master: op=Filter serial=274653 12:34:23 Color wheel filter change from 0 to 0 12:34:23 FLIGetFilterPos err=0 currentPosition=0 12:34:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:23 Filter is already there-color wheel unchanged 12:34:24 Received message from Master: op=Shutter serial=274654 12:34:24 Shutter LASER open 12:34:24 Received message from Camera: op=State serial=274656 12:34:24 GetSingleValue result=40 Value=cccccccc 12:34:24 SkyScan query 12:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:34:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:24 Parameters OK 12:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:24 Set A/D data flow result=40 12:34:24 Set A/D channel type result=40 12:34:24 Set A/D encoding result=40 12:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:24 Set channel filter=0.000000e+000 result=40 12:34:24 Config A/D Result=40 12:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:24 Get A/D filter: -9.255963e+061 result=40 12:34:24 Get A/D value=-858993460 result=40 12:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:24 Parameters OK 12:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:24 Set A/D data flow result=40 12:34:24 Set A/D channel type result=40 12:34:24 Set A/D encoding result=40 12:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:24 Set channel filter=0.000000e+000 result=40 12:34:24 Config A/D Result=40 12:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:24 Get A/D filter: -9.255963e+061 result=40 12:34:24 Get A/D value=-858993460 result=40 12:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:24 Aux= 12:34:24 Message to Camera, serial 274656 queued 12:34:32 Received message from Master: op=Shutter serial=274665 12:34:32 Shutter LASER close 12:34:32 Received message from Master: op=PointingHead serial=274669 12:34:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:34:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:34:33 Point started: ret=0 12:34:33 point_skyscan result=0 12:34:33 Check angles 12:34:33 SkyScan query 12:34:34 SkyScan query done: ret=0 az=90.195<-6013 ze=157.47<-1502 Statuses=0009 0009 12:34:34 Msec=0 True Az=90.195 Ze=157.47 Az status=0009 Ze status=0009 12:34:34 Check angles 12:34:34 SkyScan query 12:34:35 SkyScan query done: ret=0 az=72.63<-4842 ze=136.44<-2904 Statuses=0009 0009 12:34:35 Msec=750 True Az=72.63 Ze=136.44 Az status=0009 Ze status=0009 12:34:35 Check angles 12:34:35 SkyScan query 12:34:35 SkyScan query done: ret=0 az=55.245<-3683 ze=115.575<-4295 Statuses=0009 0009 12:34:35 Msec=1500 True Az=55.245 Ze=115.575 Az status=0009 Ze status=0009 12:34:36 Check angles 12:34:36 SkyScan query 12:34:36 SkyScan query done: ret=0 az=40.995<-2733 ze=94.545<-5697 Statuses=0009 0009 12:34:36 Msec=2250 True Az=40.995 Ze=94.545 Az status=0009 Ze status=0009 12:34:36 Check angles 12:34:36 SkyScan query 12:34:37 SkyScan query done: ret=0 az=40.995<-2733 ze=73.665<-7089 Statuses=0008 0009 12:34:37 Msec=3000 True Az=40.995 Ze=73.665 Az status=0008 Ze status=0009 12:34:37 Check angles 12:34:37 SkyScan query 12:34:38 SkyScan query done: ret=0 az=40.995<-2733 ze=52.965<-8469 Statuses=0008 0009 12:34:38 Msec=3750 True Az=40.995 Ze=52.965 Az status=0008 Ze status=0009 12:34:38 Check angles 12:34:38 SkyScan query 12:34:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:34:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:34:38 Message to Master queued w/err=0: serial=274669 error=0 12:34:43 Received message from Master: op=Filter serial=274670 12:34:43 Color wheel filter change from 0 to 0 12:34:43 FLIGetFilterPos err=0 currentPosition=0 12:34:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:43 Filter is already there-color wheel unchanged 12:34:44 Received message from Master: op=Shutter serial=274671 12:34:44 Shutter LASER close 12:34:44 Received message from Camera: op=State serial=274673 12:34:44 GetSingleValue result=40 Value=cccccccc 12:34:44 SkyScan query 12:34:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:34:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:44 Parameters OK 12:34:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:44 Set A/D data flow result=40 12:34:44 Set A/D channel type result=40 12:34:44 Set A/D encoding result=40 12:34:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:44 Set channel filter=0.000000e+000 result=40 12:34:44 Config A/D Result=40 12:34:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:44 Get A/D filter: -9.255963e+061 result=40 12:34:44 Get A/D value=-858993460 result=40 12:34:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:44 Parameters OK 12:34:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:44 Set A/D data flow result=40 12:34:44 Set A/D channel type result=40 12:34:44 Set A/D encoding result=40 12:34:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:44 Set channel filter=0.000000e+000 result=40 12:34:44 Config A/D Result=40 12:34:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:44 Get A/D filter: -9.255963e+061 result=40 12:34:44 Get A/D value=-858993460 result=40 12:34:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:44 Aux= 12:34:44 Message to Camera, serial 274673 queued 12:35:21 Received message from Master: op=PointingHead serial=274686 12:35:21 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:35:21 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:35:21 Point started: ret=0 12:35:21 point_skyscan result=0 12:35:22 Check angles 12:35:22 SkyScan query 12:35:23 SkyScan query done: ret=0 az=64.38<-4292 ze=66.555<-7563 Statuses=0009 0008 12:35:23 Msec=0 True Az=64.38 Ze=66.555 Az status=0009 Ze status=0008 12:35:23 Check angles 12:35:23 SkyScan query 12:35:24 SkyScan query done: ret=0 az=81.795<-5453 ze=66.495<-7567 Statuses=0009 0008 12:35:24 Msec=750 True Az=81.795 Ze=66.495 Az status=0009 Ze status=0008 12:35:24 Check angles 12:35:24 SkyScan query 12:35:24 SkyScan query done: ret=0 az=99.795<-6653 ze=66.495<-7567 Statuses=0009 0008 12:35:24 Msec=1500 True Az=99.795 Ze=66.495 Az status=0009 Ze status=0008 12:35:24 Check angles 12:35:24 SkyScan query 12:35:25 SkyScan query done: ret=0 az=117.225<-7815 ze=66.495<-7567 Statuses=0009 0008 12:35:25 Msec=2250 True Az=117.225 Ze=66.495 Az status=0009 Ze status=0008 12:35:25 Check angles 12:35:25 SkyScan query 12:35:26 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 12:35:26 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 12:35:26 Check angles 12:35:26 SkyScan query 12:35:27 SkyScan query done: ret=0 az=152.385<-10159 ze=66.495<-7567 Statuses=0009 0008 [UTC 2018-12-19 12:35:27] 12:35:27 Msec=3750 True Az=152.385 Ze=66.495 Az status=0009 Ze status=0008 12:35:27 Check angles 12:35:27 SkyScan query 12:35:27 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:35:27 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:35:27 Message to Master queued w/err=0: serial=274686 error=0 12:35:32 Received message from Master: op=Filter serial=274687 12:35:32 Color wheel filter change from 0 to 0 12:35:32 FLIGetFilterPos err=0 currentPosition=0 12:35:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:32 Filter is already there-color wheel unchanged 12:35:33 Received message from Master: op=Shutter serial=274688 12:35:33 Shutter LASER close 12:35:33 Received message from Camera: op=State serial=274690 12:35:33 GetSingleValue result=40 Value=cccccccc 12:35:33 SkyScan query 12:35:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:35:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:33 Parameters OK 12:35:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:33 Set A/D data flow result=40 12:35:33 Set A/D channel type result=40 12:35:33 Set A/D encoding result=40 12:35:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:33 Set channel filter=0.000000e+000 result=40 12:35:33 Config A/D Result=40 12:35:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:33 Get A/D filter: -9.255963e+061 result=40 12:35:33 Get A/D value=-858993460 result=40 12:35:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:33 Parameters OK 12:35:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:33 Set A/D data flow result=40 12:35:33 Set A/D channel type result=40 12:35:33 Set A/D encoding result=40 12:35:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:33 Set channel filter=0.000000e+000 result=40 12:35:33 Config A/D Result=40 12:35:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:33 Get A/D filter: -9.255963e+061 result=40 12:35:33 Get A/D value=-858993460 result=40 12:35:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:33 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:33 Aux= 12:35:33 Message to Camera, serial 274690 queued [UTC 2018-12-19 12:35:52] 12:36:10 Received message from Master: op=PointingHead serial=274703 12:36:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:36:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:36:10 Point started: ret=0 12:36:10 point_skyscan result=0 12:36:11 Check angles 12:36:11 SkyScan query 12:36:12 SkyScan query done: ret=0 az=134.805<-8987 ze=36.495<-9567 Statuses=0009 0009 12:36:12 Msec=0 True Az=134.805 Ze=36.495 Az status=0009 Ze status=0009 12:36:12 Check angles 12:36:12 SkyScan query 12:36:12 SkyScan query done: ret=0 az=116.97<-7798 ze=15.09<-10994 Statuses=0009 0009 12:36:12 Msec=750 True Az=116.97 Ze=15.09 Az status=0009 Ze status=0009 12:36:13 Check angles 12:36:13 SkyScan query 12:36:13 SkyScan query done: ret=0 az=99.585<-6639 ze=-5.85<-12390 Statuses=0009 0009 12:36:13 Msec=1500 True Az=99.585 Ze=-5.85 Az status=0009 Ze status=0009 12:36:13 Check angles 12:36:13 SkyScan query 12:36:14 SkyScan query done: ret=0 az=82.095<-5473 ze=-26.91<-13794 Statuses=0009 0009 12:36:14 Msec=2250 True Az=82.095 Ze=-26.91 Az status=0009 Ze status=0009 12:36:14 Check angles 12:36:14 SkyScan query 12:36:15 SkyScan query done: ret=0 az=64.59<-4306 ze=-38.565<-14571 Statuses=0009 0008 12:36:15 Msec=3000 True Az=64.59 Ze=-38.565 Az status=0009 Ze status=0008 12:36:15 Check angles 12:36:15 SkyScan query 12:36:15 SkyScan query done: ret=0 az=47.1<-3140 ze=-38.535<-14569 Statuses=0009 0008 12:36:15 Msec=3750 True Az=47.1 Ze=-38.535 Az status=0009 Ze status=0008 12:36:16 Check angles 12:36:16 SkyScan query 12:36:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:36:16 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:36:16 Message to Master queued w/err=0: serial=274703 error=0 12:36:21 Received message from Master: op=Filter serial=274704 12:36:21 Color wheel filter change from 0 to 0 12:36:21 FLIGetFilterPos err=0 currentPosition=0 12:36:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:21 Filter is already there-color wheel unchanged 12:36:21 Received message from Master: op=Shutter serial=274705 12:36:21 Shutter LASER close 12:36:21 Received message from Camera: op=State serial=274707 12:36:21 GetSingleValue result=40 Value=cccccccc 12:36:21 SkyScan query 12:36:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:36:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:22 Parameters OK 12:36:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:22 Set A/D data flow result=40 12:36:22 Set A/D channel type result=40 12:36:22 Set A/D encoding result=40 12:36:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:22 Set channel filter=0.000000e+000 result=40 12:36:22 Config A/D Result=40 12:36:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:22 Get A/D filter: -9.255963e+061 result=40 12:36:22 Get A/D value=-858993460 result=40 12:36:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:22 Parameters OK 12:36:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:22 Set A/D data flow result=40 12:36:22 Set A/D channel type result=40 12:36:22 Set A/D encoding result=40 12:36:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:22 Set channel filter=0.000000e+000 result=40 12:36:22 Config A/D Result=40 12:36:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:22 Get A/D filter: -9.255963e+061 result=40 12:36:22 Get A/D value=-858993460 result=40 12:36:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:22 Aux= 12:36:22 Message to Camera, serial 274707 queued 12:36:59 Received message from Master: op=PointingHead serial=274720 12:36:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:36:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:36:59 Point started: ret=0 12:36:59 point_skyscan result=0 12:37:00 Check angles 12:37:00 SkyScan query 12:37:00 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.52<-16568 Statuses=0009 0009 12:37:00 Msec=0 True Az=64.185 Ze=-68.52 Az status=0009 Ze status=0009 12:37:01 Check angles 12:37:01 SkyScan query 12:37:01 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.49<-17966 Statuses=0009 0009 12:37:01 Msec=750 True Az=81.57 Ze=-89.49 Az status=0009 Ze status=0009 12:37:01 Check angles 12:37:01 SkyScan query 12:37:02 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.46<-19364 Statuses=0009 0009 12:37:02 Msec=1500 True Az=99.105 Ze=-110.46 Az status=0009 Ze status=0009 12:37:02 Check angles 12:37:02 SkyScan query 12:37:03 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.76<-20784 Statuses=0009 0009 12:37:03 Msec=2250 True Az=116.895 Ze=-131.76 Az status=0009 Ze status=0009 12:37:03 Check angles 12:37:03 SkyScan query 12:37:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 12:37:04 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 12:37:04 Check angles 12:37:04 SkyScan query 12:37:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:37:04 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:37:04 Message to Master queued w/err=0: serial=274720 error=0 12:37:09 Received message from Master: op=Filter serial=274721 12:37:09 Color wheel filter change from 0 to 0 12:37:09 FLIGetFilterPos err=0 currentPosition=0 12:37:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:09 Filter is already there-color wheel unchanged 12:37:09 Received message from Master: op=Shutter serial=274722 12:37:09 Shutter LASER close 12:37:09 Received message from Camera: op=State serial=274724 12:37:09 GetSingleValue result=40 Value=cccccccc 12:37:09 SkyScan query 12:37:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:37:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:10 Parameters OK 12:37:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:10 Set A/D data flow result=40 12:37:10 Set A/D channel type result=40 12:37:10 Set A/D encoding result=40 12:37:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:10 Set channel filter=0.000000e+000 result=40 12:37:10 Config A/D Result=40 12:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:10 Get A/D filter: -9.255963e+061 result=40 12:37:10 Get A/D value=-858993460 result=40 12:37:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:10 Parameters OK 12:37:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:10 Set A/D data flow result=40 12:37:10 Set A/D channel type result=40 12:37:10 Set A/D encoding result=40 12:37:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:10 Set channel filter=0.000000e+000 result=40 12:37:10 Config A/D Result=40 12:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:10 Get A/D filter: -9.255963e+061 result=40 12:37:10 Get A/D value=-858993460 result=40 12:37:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:10 Aux= 12:37:10 Message to Camera, serial 274724 queued 12:37:47 Received message from Master: op=PointingHead serial=274737 12:37:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:37:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:37:47 Point started: ret=0 12:37:47 point_skyscan result=0 12:37:48 Check angles 12:37:48 SkyScan query 12:37:49 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.51<-23434 Statuses=0009 0009 12:37:49 Msec=0 True Az=113.01 Ze=-171.51 Az status=0009 Ze status=0009 12:37:49 Check angles 12:37:49 SkyScan query 12:37:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:37:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:37:49 Message to Master queued w/err=0: serial=274737 error=0 12:37:54 Received message from Master: op=Filter serial=274738 12:37:54 Color wheel filter change from 0 to 0 12:37:54 FLIGetFilterPos err=0 currentPosition=0 12:37:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:54 Filter is already there-color wheel unchanged 12:37:55 Received message from Master: op=Shutter serial=274739 12:37:55 Shutter LASER open 12:37:55 Received message from Camera: op=State serial=274741 12:37:55 GetSingleValue result=40 Value=cccccccc 12:37:55 SkyScan query 12:37:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:37:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:55 Parameters OK 12:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:55 Set A/D data flow result=40 12:37:55 Set A/D channel type result=40 12:37:55 Set A/D encoding result=40 12:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:55 Set channel filter=0.000000e+000 result=40 12:37:55 Config A/D Result=40 12:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:55 Get A/D filter: -9.255963e+061 result=40 12:37:55 Get A/D value=-858993460 result=40 12:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:55 Parameters OK 12:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:55 Set A/D data flow result=40 12:37:55 Set A/D channel type result=40 12:37:55 Set A/D encoding result=40 12:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:55 Set channel filter=0.000000e+000 result=40 12:37:55 Config A/D Result=40 12:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:55 Get A/D filter: -9.255963e+061 result=40 12:37:55 Get A/D value=-858993460 result=40 12:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:55 Aux= 12:37:55 Message to Camera, serial 274741 queued 12:38:04 Received message from Master: op=Shutter serial=274751 12:38:04 Shutter LASER close 12:38:04 Received message from Master: op=PointingHead serial=274755 12:38:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:38:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:38:05 Point started: ret=0 12:38:05 point_skyscan result=0 12:38:05 Check angles 12:38:05 SkyScan query 12:38:06 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.49<-21566 Statuses=0009 0009 12:38:06 Msec=0 True Az=135.84 Ze=-143.49 Az status=0009 Ze status=0009 12:38:06 Check angles 12:38:06 SkyScan query 12:38:07 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.055<-20137 Statuses=0009 0009 12:38:07 Msec=750 True Az=153.645 Ze=-122.055 Az status=0009 Ze status=0009 12:38:07 Check angles 12:38:07 SkyScan query 12:38:07 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.145<-18743 Statuses=0009 0009 12:38:07 Msec=1500 True Az=171.135 Ze=-101.145 Az status=0009 Ze status=0009 12:38:08 Check angles 12:38:08 SkyScan query 12:38:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.19<-17346 Statuses=0008 0009 12:38:08 Msec=2250 True Az=176.01 Ze=-80.19 Az status=0008 Ze status=0009 12:38:08 Check angles 12:38:08 SkyScan query 12:38:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.71<-15914 Statuses=0008 0009 12:38:09 Msec=3000 True Az=176.01 Ze=-58.71 Az status=0008 Ze status=0009 12:38:09 Check angles 12:38:09 SkyScan query 12:38:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 12:38:10 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 12:38:10 Message to Master queued w/err=0: serial=274755 error=0 12:38:15 Received message from Master: op=Filter serial=274756 12:38:15 Color wheel filter change from 0 to 0 12:38:15 FLIGetFilterPos err=0 currentPosition=0 12:38:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:15 Filter is already there-color wheel unchanged 12:38:15 Received message from Master: op=Shutter serial=274757 12:38:15 Shutter LASER close 12:38:15 Received message from Camera: op=State serial=274759 12:38:15 GetSingleValue result=40 Value=cccccccc 12:38:15 SkyScan query 12:38:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:38:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:16 Parameters OK 12:38:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:16 Set A/D data flow result=40 12:38:16 Set A/D channel type result=40 12:38:16 Set A/D encoding result=40 12:38:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:16 Set channel filter=0.000000e+000 result=40 12:38:16 Config A/D Result=40 12:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:16 Get A/D filter: -9.255963e+061 result=40 12:38:16 Get A/D value=-858993460 result=40 12:38:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:16 Parameters OK 12:38:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:16 Set A/D data flow result=40 12:38:16 Set A/D channel type result=40 12:38:16 Set A/D encoding result=40 12:38:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:16 Set channel filter=0.000000e+000 result=40 12:38:16 Config A/D Result=40 12:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:16 Get A/D filter: -9.255963e+061 result=40 12:38:16 Get A/D value=-858993460 result=40 12:38:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:16 Aux= 12:38:16 Message to Camera, serial 274759 queued 12:38:52 Received message from Master: op=PointingHead serial=274772 12:38:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:38:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:38:53 Point started: ret=0 12:38:53 point_skyscan result=0 12:38:54 Check angles 12:38:54 SkyScan query 12:38:54 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.675<-13445 Statuses=0009 0009 12:38:54 Msec=0 True Az=152.955 Ze=-21.675 Az status=0009 Ze status=0009 12:38:54 Check angles 12:38:54 SkyScan query 12:38:55 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.66<-12044 Statuses=0009 0009 12:38:55 Msec=750 True Az=135.39 Ze=-0.66 Az status=0009 Ze status=0009 12:38:55 Check angles 12:38:55 SkyScan query 12:38:56 SkyScan query done: ret=0 az=117.99<-7866 ze=20.235<-10651 Statuses=0009 0009 12:38:56 Msec=1500 True Az=117.99 Ze=20.235 Az status=0009 Ze status=0009 12:38:56 Check angles 12:38:56 SkyScan query 12:38:56 SkyScan query done: ret=0 az=100.545<-6703 ze=41.28<-9248 Statuses=0009 0009 12:38:56 Msec=2250 True Az=100.545 Ze=41.28 Az status=0009 Ze status=0009 12:38:57 Check angles 12:38:57 SkyScan query 12:38:57 SkyScan query done: ret=0 az=85.98<-5732 ze=51.585<-8561 Statuses=0009 0008 12:38:57 Msec=3000 True Az=85.98 Ze=51.585 Az status=0009 Ze status=0008 12:38:57 Check angles 12:38:57 SkyScan query 12:38:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:38:58 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:38:58 Message to Master queued w/err=0: serial=274772 error=0 12:39:03 Received message from Master: op=Filter serial=274773 12:39:03 Color wheel filter change from 0 to 0 12:39:03 FLIGetFilterPos err=0 currentPosition=0 12:39:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:03 Filter is already there-color wheel unchanged 12:39:03 Received message from Master: op=Shutter serial=274774 12:39:03 Shutter LASER close 12:39:03 Received message from Camera: op=State serial=274776 12:39:03 GetSingleValue result=40 Value=cccccccc 12:39:03 SkyScan query 12:39:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:39:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:04 Parameters OK 12:39:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:04 Set A/D data flow result=40 12:39:04 Set A/D channel type result=40 12:39:04 Set A/D encoding result=40 12:39:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:04 Set channel filter=0.000000e+000 result=40 12:39:04 Config A/D Result=40 12:39:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:04 Get A/D filter: -9.255963e+061 result=40 12:39:04 Get A/D value=-858993460 result=40 12:39:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:04 Parameters OK 12:39:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:04 Set A/D data flow result=40 12:39:04 Set A/D channel type result=40 12:39:04 Set A/D encoding result=40 12:39:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:04 Set channel filter=0.000000e+000 result=40 12:39:04 Config A/D Result=40 12:39:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:04 Get A/D filter: -9.255963e+061 result=40 12:39:04 Get A/D value=-858993460 result=40 12:39:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:04 Aux= 12:39:04 Message to Camera, serial 274776 queued 12:39:41 Received message from Master: op=PointingHead serial=274789 12:39:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:39:41 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:39:41 Point started: ret=0 12:39:41 point_skyscan result=0 12:39:42 Check angles 12:39:42 SkyScan query 12:39:42 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 12:39:42 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 12:39:43 Check angles 12:39:43 SkyScan query 12:39:43 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 12:39:43 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 12:39:43 Check angles 12:39:43 SkyScan query 12:39:44 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 12:39:44 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 12:39:44 Check angles 12:39:44 SkyScan query 12:39:45 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 12:39:45 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 12:39:45 Check angles 12:39:45 SkyScan query 12:39:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:39:45 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:39:46 Check angles 12:39:46 SkyScan query 12:39:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:39:46 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:39:46 Message to Master queued w/err=0: serial=274789 error=0 12:39:51 Received message from Master: op=Filter serial=274790 12:39:51 Color wheel filter change from 0 to 0 12:39:51 FLIGetFilterPos err=0 currentPosition=0 12:39:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:51 Filter is already there-color wheel unchanged 12:39:51 Received message from Master: op=Shutter serial=274791 12:39:51 Shutter LASER close 12:39:51 Received message from Camera: op=State serial=274793 12:39:51 GetSingleValue result=40 Value=cccccccc 12:39:51 SkyScan query 12:39:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:39:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:52 Parameters OK 12:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:52 Set A/D data flow result=40 12:39:52 Set A/D channel type result=40 12:39:52 Set A/D encoding result=40 12:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:52 Set channel filter=0.000000e+000 result=40 12:39:52 Config A/D Result=40 12:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:52 Get A/D filter: -9.255963e+061 result=40 12:39:52 Get A/D value=-858993460 result=40 12:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:52 Parameters OK 12:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:52 Set A/D data flow result=40 12:39:52 Set A/D channel type result=40 12:39:52 Set A/D encoding result=40 12:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:52 Set channel filter=0.000000e+000 result=40 12:39:52 Config A/D Result=40 12:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:52 Get A/D filter: -9.255963e+061 result=40 12:39:52 Get A/D value=-858993460 result=40 12:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:52 Aux= 12:39:52 Message to Camera, serial 274793 queued 12:40:29 Received message from Master: op=PointingHead serial=274806 12:40:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:40:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:40:29 Point started: ret=0 12:40:29 point_skyscan result=0 12:40:30 Check angles 12:40:30 SkyScan query 12:40:31 SkyScan query done: ret=0 az=152.91<-10194 ze=68.445<-7437 Statuses=0009 0009 12:40:31 Msec=0 True Az=152.91 Ze=68.445 Az status=0009 Ze status=0009 12:40:31 Check angles 12:40:31 SkyScan query 12:40:31 SkyScan query done: ret=0 az=135.06<-9004 ze=89.88<-6008 Statuses=0009 0009 12:40:31 Msec=750 True Az=135.06 Ze=89.88 Az status=0009 Ze status=0009 12:40:32 Check angles 12:40:32 SkyScan query 12:40:32 SkyScan query done: ret=0 az=117.57<-7838 ze=110.775<-4615 Statuses=0009 0009 12:40:32 Msec=1500 True Az=117.57 Ze=110.775 Az status=0009 Ze status=0009 12:40:32 Check angles 12:40:32 SkyScan query 12:40:33 SkyScan query done: ret=0 az=112.98<-7532 ze=131.76<-3216 Statuses=0008 0009 12:40:33 Msec=2250 True Az=112.98 Ze=131.76 Az status=0008 Ze status=0009 12:40:33 Check angles 12:40:33 SkyScan query 12:40:34 SkyScan query done: ret=0 az=112.995<-7533 ze=152.7<-1820 Statuses=0008 0009 12:40:34 Msec=3000 True Az=112.995 Ze=152.7 Az status=0008 Ze status=0009 12:40:34 Check angles 12:40:34 SkyScan query 12:40:34 SkyScan query done: ret=0 az=112.995<-7533 ze=173.67<-422 Statuses=0008 0009 12:40:34 Msec=3750 True Az=112.995 Ze=173.67 Az status=0008 Ze status=0009 12:40:35 Check angles 12:40:35 SkyScan query 12:40:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 12:40:35 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 12:40:35 Message to Master queued w/err=0: serial=274806 error=0 12:40:40 Received message from Master: op=Filter serial=274807 12:40:40 Color wheel filter change from 0 to 0 12:40:40 FLIGetFilterPos err=0 currentPosition=0 12:40:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:40 Filter is already there-color wheel unchanged 12:40:40 Received message from Master: op=Shutter serial=274808 12:40:40 Shutter LASER open 12:40:40 Received message from Camera: op=State serial=274810 12:40:40 GetSingleValue result=40 Value=cccccccc 12:40:40 SkyScan query 12:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:40:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:41 Parameters OK 12:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:41 Set A/D data flow result=40 12:40:41 Set A/D channel type result=40 12:40:41 Set A/D encoding result=40 12:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:41 Set channel filter=0.000000e+000 result=40 12:40:41 Config A/D Result=40 12:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:41 Get A/D filter: -9.255963e+061 result=40 12:40:41 Get A/D value=-858993460 result=40 12:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:41 Parameters OK 12:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:41 Set A/D data flow result=40 12:40:41 Set A/D channel type result=40 12:40:41 Set A/D encoding result=40 12:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:41 Set channel filter=0.000000e+000 result=40 12:40:41 Config A/D Result=40 12:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:41 Get A/D filter: -9.255963e+061 result=40 12:40:41 Get A/D value=-858993460 result=40 12:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:41 Aux= 12:40:41 Message to Camera, serial 274810 queued 12:40:49 Received message from Master: op=Shutter serial=274820 12:40:49 Shutter LASER close 12:40:50 Received message from Master: op=PointingHead serial=274824 12:40:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:40:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:40:50 Point started: ret=0 12:40:50 point_skyscan result=0 12:40:51 Check angles 12:40:51 SkyScan query 12:40:52 SkyScan query done: ret=0 az=90.195<-6013 ze=157.53<-1498 Statuses=0009 0009 12:40:52 Msec=0 True Az=90.195 Ze=157.53 Az status=0009 Ze status=0009 12:40:52 Check angles 12:40:52 SkyScan query 12:40:52 SkyScan query done: ret=0 az=72.645<-4843 ze=136.5<-2900 Statuses=0009 0009 12:40:52 Msec=750 True Az=72.645 Ze=136.5 Az status=0009 Ze status=0009 12:40:52 Check angles 12:40:52 SkyScan query 12:40:53 SkyScan query done: ret=0 az=55.335<-3689 ze=115.65<-4290 Statuses=0009 0009 12:40:53 Msec=1500 True Az=55.335 Ze=115.65 Az status=0009 Ze status=0009 12:40:53 Check angles 12:40:53 SkyScan query 12:40:54 SkyScan query done: ret=0 az=40.995<-2733 ze=94.62<-5692 Statuses=0009 0009 12:40:54 Msec=2250 True Az=40.995 Ze=94.62 Az status=0009 Ze status=0009 12:40:54 Check angles 12:40:54 SkyScan query 12:40:55 SkyScan query done: ret=0 az=40.995<-2733 ze=73.74<-7084 Statuses=0008 0009 12:40:55 Msec=3000 True Az=40.995 Ze=73.74 Az status=0008 Ze status=0009 12:40:55 Check angles 12:40:55 SkyScan query 12:40:55 SkyScan query done: ret=0 az=40.995<-2733 ze=53.01<-8466 Statuses=0008 0009 12:40:55 Msec=3750 True Az=40.995 Ze=53.01 Az status=0008 Ze status=0009 12:40:55 Check angles 12:40:55 SkyScan query 12:40:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:40:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:40:56 Message to Master queued w/err=0: serial=274824 error=0 12:41:01 Received message from Master: op=Filter serial=274825 12:41:01 Color wheel filter change from 0 to 0 12:41:01 FLIGetFilterPos err=0 currentPosition=0 12:41:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:01 Filter is already there-color wheel unchanged 12:41:01 Received message from Master: op=Shutter serial=274826 12:41:01 Shutter LASER close 12:41:01 Received message from Camera: op=State serial=274828 12:41:01 GetSingleValue result=40 Value=cccccccc 12:41:01 SkyScan query 12:41:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:41:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:02 Parameters OK 12:41:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:02 Set A/D data flow result=40 12:41:02 Set A/D channel type result=40 12:41:02 Set A/D encoding result=40 12:41:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:02 Set channel filter=0.000000e+000 result=40 12:41:02 Config A/D Result=40 12:41:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:02 Get A/D filter: -9.255963e+061 result=40 12:41:02 Get A/D value=-858993460 result=40 12:41:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:02 Parameters OK 12:41:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:02 Set A/D data flow result=40 12:41:02 Set A/D channel type result=40 12:41:02 Set A/D encoding result=40 12:41:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:02 Set channel filter=0.000000e+000 result=40 12:41:02 Config A/D Result=40 12:41:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:02 Get A/D filter: -9.255963e+061 result=40 12:41:02 Get A/D value=-858993460 result=40 12:41:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:02 Aux= 12:41:02 Message to Camera, serial 274828 queued 12:41:39 Received message from Master: op=PointingHead serial=274841 12:41:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:41:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:41:39 Point started: ret=0 12:41:39 point_skyscan result=0 12:41:40 Check angles 12:41:40 SkyScan query 12:41:40 SkyScan query done: ret=0 az=64.365<-4291 ze=66.555<-7563 Statuses=0009 0008 12:41:40 Msec=0 True Az=64.365 Ze=66.555 Az status=0009 Ze status=0008 12:41:41 Check angles 12:41:41 SkyScan query 12:41:41 SkyScan query done: ret=0 az=81.855<-5457 ze=66.51<-7566 Statuses=0009 0008 12:41:41 Msec=750 True Az=81.855 Ze=66.51 Az status=0009 Ze status=0008 12:41:41 Check angles 12:41:41 SkyScan query 12:41:42 SkyScan query done: ret=0 az=99.33<-6622 ze=66.495<-7567 Statuses=0009 0008 12:41:42 Msec=1500 True Az=99.33 Ze=66.495 Az status=0009 Ze status=0008 12:41:42 Check angles 12:41:42 SkyScan query 12:41:43 SkyScan query done: ret=0 az=117.255<-7817 ze=66.495<-7567 Statuses=0009 0008 12:41:43 Msec=2250 True Az=117.255 Ze=66.495 Az status=0009 Ze status=0008 12:41:43 Check angles 12:41:43 SkyScan query 12:41:44 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 12:41:44 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 12:41:44 Check angles 12:41:44 SkyScan query 12:41:44 SkyScan query done: ret=0 az=151.995<-10133 ze=66.495<-7567 Statuses=0009 0008 12:41:44 Msec=3750 True Az=151.995 Ze=66.495 Az status=0009 Ze status=0008 12:41:44 Check angles 12:41:44 SkyScan query 12:41:45 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:41:45 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:41:45 Message to Master queued w/err=0: serial=274841 error=0 12:41:50 Received message from Master: op=Filter serial=274842 12:41:50 Color wheel filter change from 0 to 0 12:41:50 FLIGetFilterPos err=0 currentPosition=0 12:41:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:50 Filter is already there-color wheel unchanged 12:41:50 Received message from Master: op=Shutter serial=274843 12:41:50 Shutter LASER close 12:41:50 Received message from Camera: op=State serial=274845 12:41:50 GetSingleValue result=40 Value=cccccccc 12:41:50 SkyScan query 12:41:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:41:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:51 Parameters OK 12:41:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:51 Set A/D data flow result=40 12:41:51 Set A/D channel type result=40 12:41:51 Set A/D encoding result=40 12:41:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:51 Set channel filter=0.000000e+000 result=40 12:41:51 Config A/D Result=40 12:41:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:51 Get A/D filter: -9.255963e+061 result=40 12:41:51 Get A/D value=-858993460 result=40 12:41:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:51 Parameters OK 12:41:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:51 Set A/D data flow result=40 12:41:51 Set A/D channel type result=40 12:41:51 Set A/D encoding result=40 12:41:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:51 Set channel filter=0.000000e+000 result=40 12:41:51 Config A/D Result=40 12:41:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:51 Get A/D filter: -9.255963e+061 result=40 12:41:51 Get A/D value=-858993460 result=40 12:41:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:51 Aux= 12:41:51 Message to Camera, serial 274845 queued 12:42:28 Received message from Master: op=PointingHead serial=274858 12:42:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:42:28 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:42:28 Point started: ret=0 12:42:28 point_skyscan result=0 12:42:29 Check angles 12:42:29 SkyScan query 12:42:29 SkyScan query done: ret=0 az=134.94<-8996 ze=36.885<-9541 Statuses=0009 0009 12:42:29 Msec=0 True Az=134.94 Ze=36.885 Az status=0009 Ze status=0009 12:42:29 Check angles 12:42:29 SkyScan query 12:42:30 SkyScan query done: ret=0 az=117.615<-7841 ze=15.945<-10937 Statuses=0009 0009 12:42:30 Msec=750 True Az=117.615 Ze=15.945 Az status=0009 Ze status=0009 12:42:30 Check angles 12:42:30 SkyScan query 12:42:31 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.355<-12357 Statuses=0009 0009 12:42:31 Msec=1500 True Az=99.795 Ze=-5.355 Az status=0009 Ze status=0009 12:42:31 Check angles 12:42:31 SkyScan query 12:42:32 SkyScan query done: ret=0 az=82.32<-5488 ze=-26.295<-13753 Statuses=0009 0009 12:42:32 Msec=2250 True Az=82.32 Ze=-26.295 Az status=0009 Ze status=0009 12:42:32 Check angles 12:42:32 SkyScan query 12:42:32 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.565<-14571 Statuses=0009 0008 12:42:32 Msec=3000 True Az=64.86 Ze=-38.565 Az status=0009 Ze status=0008 12:42:32 Check angles 12:42:32 SkyScan query 12:42:33 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.535<-14569 Statuses=0009 0008 12:42:33 Msec=3750 True Az=47.025 Ze=-38.535 Az status=0009 Ze status=0008 12:42:33 Check angles 12:42:33 SkyScan query 12:42:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:42:34 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:42:34 Message to Master queued w/err=0: serial=274858 error=0 12:42:39 Received message from Master: op=Filter serial=274859 12:42:39 Color wheel filter change from 0 to 0 12:42:39 FLIGetFilterPos err=0 currentPosition=0 12:42:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:39 Filter is already there-color wheel unchanged 12:42:39 Received message from Master: op=Shutter serial=274860 12:42:39 Shutter LASER close 12:42:39 Received message from Camera: op=State serial=274862 12:42:39 GetSingleValue result=40 Value=cccccccc 12:42:39 SkyScan query 12:42:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:42:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:40 Parameters OK 12:42:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:40 Set A/D data flow result=40 12:42:40 Set A/D channel type result=40 12:42:40 Set A/D encoding result=40 12:42:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:40 Set channel filter=0.000000e+000 result=40 12:42:40 Config A/D Result=40 12:42:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:40 Get A/D filter: -9.255963e+061 result=40 12:42:40 Get A/D value=-858993460 result=40 12:42:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:40 Parameters OK 12:42:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:40 Set A/D data flow result=40 12:42:40 Set A/D channel type result=40 12:42:40 Set A/D encoding result=40 12:42:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:40 Set channel filter=0.000000e+000 result=40 12:42:40 Config A/D Result=40 12:42:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:40 Get A/D filter: -9.255963e+061 result=40 12:42:40 Get A/D value=-858993460 result=40 12:42:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:40 Aux= 12:42:40 Message to Camera, serial 274862 queued 12:43:16 Received message from Master: op=PointingHead serial=274875 12:43:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:43:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:43:17 Point started: ret=0 12:43:17 point_skyscan result=0 12:43:18 Check angles 12:43:18 SkyScan query 12:43:18 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.295<-16553 Statuses=0009 0009 12:43:18 Msec=0 True Az=63.99 Ze=-68.295 Az status=0009 Ze status=0009 12:43:18 Check angles 12:43:18 SkyScan query 12:43:19 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.295<-17953 Statuses=0009 0009 12:43:19 Msec=750 True Az=81.375 Ze=-89.295 Az status=0009 Ze status=0009 12:43:19 Check angles 12:43:19 SkyScan query 12:43:20 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.205<-19347 Statuses=0009 0009 12:43:20 Msec=1500 True Az=98.85 Ze=-110.205 Az status=0009 Ze status=0009 12:43:20 Check angles 12:43:20 SkyScan query 12:43:20 SkyScan query done: ret=0 az=116.325<-7755 ze=-131.145<-20743 Statuses=0009 0009 12:43:20 Msec=2250 True Az=116.325 Ze=-131.145 Az status=0009 Ze status=0009 12:43:21 Check angles 12:43:21 SkyScan query 12:43:21 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 12:43:21 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 12:43:21 Check angles 12:43:21 SkyScan query 12:43:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:43:22 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:43:22 Message to Master queued w/err=0: serial=274875 error=0 12:43:27 Received message from Master: op=Filter serial=274876 12:43:27 Color wheel filter change from 0 to 0 12:43:27 FLIGetFilterPos err=0 currentPosition=0 12:43:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:27 Filter is already there-color wheel unchanged 12:43:27 Received message from Master: op=Shutter serial=274877 12:43:27 Shutter LASER close 12:43:27 Received message from Camera: op=State serial=274879 12:43:27 GetSingleValue result=40 Value=cccccccc 12:43:27 SkyScan query 12:43:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:43:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:28 Parameters OK 12:43:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:28 Set A/D data flow result=40 12:43:28 Set A/D channel type result=40 12:43:28 Set A/D encoding result=40 12:43:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:28 Set channel filter=0.000000e+000 result=40 12:43:28 Config A/D Result=40 12:43:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:28 Get A/D filter: -9.255963e+061 result=40 12:43:28 Get A/D value=-858993460 result=40 12:43:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:28 Parameters OK 12:43:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:28 Set A/D data flow result=40 12:43:28 Set A/D channel type result=40 12:43:28 Set A/D encoding result=40 12:43:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:28 Set channel filter=0.000000e+000 result=40 12:43:28 Config A/D Result=40 12:43:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:28 Get A/D filter: -9.255963e+061 result=40 12:43:28 Get A/D value=-858993460 result=40 12:43:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:28 Aux= 12:43:28 Message to Camera, serial 274879 queued 12:44:05 Received message from Master: op=PointingHead serial=274892 12:44:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:44:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:44:05 Point started: ret=0 12:44:05 point_skyscan result=0 12:44:06 Check angles 12:44:06 SkyScan query 12:44:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 12:44:06 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 12:44:06 Check angles 12:44:06 SkyScan query 12:44:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:44:07 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:44:07 Message to Master queued w/err=0: serial=274892 error=0 12:44:12 Received message from Master: op=Filter serial=274893 12:44:12 Color wheel filter change from 0 to 0 12:44:12 FLIGetFilterPos err=0 currentPosition=0 12:44:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:12 Filter is already there-color wheel unchanged 12:44:12 Received message from Master: op=Shutter serial=274894 12:44:12 Shutter LASER open 12:44:12 Received message from Camera: op=State serial=274896 12:44:12 GetSingleValue result=40 Value=cccccccc 12:44:12 SkyScan query 12:44:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:44:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:13 Parameters OK 12:44:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:13 Set A/D data flow result=40 12:44:13 Set A/D channel type result=40 12:44:13 Set A/D encoding result=40 12:44:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:13 Set channel filter=0.000000e+000 result=40 12:44:13 Config A/D Result=40 12:44:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:13 Get A/D filter: -9.255963e+061 result=40 12:44:13 Get A/D value=-858993460 result=40 12:44:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:13 Parameters OK 12:44:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:13 Set A/D data flow result=40 12:44:13 Set A/D channel type result=40 12:44:13 Set A/D encoding result=40 12:44:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:13 Set channel filter=0.000000e+000 result=40 12:44:13 Config A/D Result=40 12:44:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:13 Get A/D filter: -9.255963e+061 result=40 12:44:13 Get A/D value=-858993460 result=40 12:44:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:13 Aux= 12:44:13 Message to Camera, serial 274896 queued 12:44:21 Received message from Master: op=Shutter serial=274906 12:44:21 Shutter LASER close 12:44:22 Received message from Master: op=PointingHead serial=274910 12:44:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:44:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:44:22 Point started: ret=0 12:44:22 point_skyscan result=0 12:44:23 Check angles 12:44:23 SkyScan query 12:44:24 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.965<-21531 Statuses=0009 0009 12:44:24 Msec=0 True Az=136.17 Ze=-142.965 Az status=0009 Ze status=0009 12:44:24 Check angles 12:44:24 SkyScan query 12:44:24 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.965<-20131 Statuses=0009 0009 12:44:24 Msec=750 True Az=153.705 Ze=-121.965 Az status=0009 Ze status=0009 12:44:25 Check angles 12:44:25 SkyScan query 12:44:25 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.025<-18735 Statuses=0009 0009 12:44:25 Msec=1500 True Az=171.195 Ze=-101.025 Az status=0009 Ze status=0009 12:44:25 Check angles 12:44:25 SkyScan query 12:44:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.635<-17309 Statuses=0008 0009 12:44:26 Msec=2250 True Az=176.01 Ze=-79.635 Az status=0008 Ze status=0009 12:44:26 Check angles 12:44:26 SkyScan query 12:44:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.2<-15880 Statuses=0008 0009 12:44:27 Msec=3000 True Az=176.01 Ze=-58.2 Az status=0008 Ze status=0009 12:44:27 Check angles 12:44:27 SkyScan query 12:44:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:44:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:44:27 Message to Master queued w/err=0: serial=274910 error=0 12:44:32 Received message from Master: op=Filter serial=274911 12:44:32 Color wheel filter change from 0 to 0 12:44:32 FLIGetFilterPos err=0 currentPosition=0 12:44:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:32 Filter is already there-color wheel unchanged 12:44:33 Received message from Master: op=Shutter serial=274912 12:44:33 Shutter LASER close 12:44:33 Received message from Camera: op=State serial=274914 12:44:33 GetSingleValue result=40 Value=cccccccc 12:44:33 SkyScan query 12:44:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:44:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:33 Parameters OK 12:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:33 Set A/D data flow result=40 12:44:33 Set A/D channel type result=40 12:44:33 Set A/D encoding result=40 12:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:33 Set channel filter=0.000000e+000 result=40 12:44:33 Config A/D Result=40 12:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:33 Get A/D filter: -9.255963e+061 result=40 12:44:33 Get A/D value=-858993460 result=40 12:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:33 Parameters OK 12:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:33 Set A/D data flow result=40 12:44:33 Set A/D channel type result=40 12:44:33 Set A/D encoding result=40 12:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:33 Set channel filter=0.000000e+000 result=40 12:44:33 Config A/D Result=40 12:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:33 Get A/D filter: -9.255963e+061 result=40 12:44:33 Get A/D value=-858993460 result=40 12:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:33 Aux= 12:44:33 Message to Camera, serial 274914 queued 12:45:10 Received message from Master: op=PointingHead serial=274927 12:45:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:45:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:45:11 Point started: ret=0 12:45:11 point_skyscan result=0 12:45:11 Check angles 12:45:11 SkyScan query 12:45:12 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.765<-13451 Statuses=0009 0009 12:45:12 Msec=0 True Az=152.955 Ze=-21.765 Az status=0009 Ze status=0009 12:45:12 Check angles 12:45:12 SkyScan query 12:45:13 SkyScan query done: ret=0 az=135.54<-9036 ze=-0.75<-12050 Statuses=0009 0009 12:45:13 Msec=750 True Az=135.54 Ze=-0.75 Az status=0009 Ze status=0009 12:45:13 Check angles 12:45:13 SkyScan query 12:45:13 SkyScan query done: ret=0 az=118.05<-7870 ze=20.13<-10658 Statuses=0009 0009 12:45:13 Msec=1500 True Az=118.05 Ze=20.13 Az status=0009 Ze status=0009 12:45:14 Check angles 12:45:14 SkyScan query 12:45:14 SkyScan query done: ret=0 az=100.68<-6712 ze=41.175<-9255 Statuses=0009 0009 12:45:14 Msec=2250 True Az=100.68 Ze=41.175 Az status=0009 Ze status=0009 12:45:14 Check angles 12:45:14 SkyScan query 12:45:15 SkyScan query done: ret=0 az=85.98<-5732 ze=51.585<-8561 Statuses=0009 0008 12:45:15 Msec=3000 True Az=85.98 Ze=51.585 Az status=0009 Ze status=0008 12:45:15 Check angles 12:45:15 SkyScan query 12:45:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:45:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:45:16 Message to Master queued w/err=0: serial=274927 error=0 12:45:21 Received message from Master: op=Filter serial=274928 12:45:21 Color wheel filter change from 0 to 0 12:45:21 FLIGetFilterPos err=0 currentPosition=0 12:45:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:21 Filter is already there-color wheel unchanged 12:45:21 Received message from Master: op=Shutter serial=274929 12:45:21 Shutter LASER close 12:45:21 Received message from Camera: op=State serial=274931 12:45:21 GetSingleValue result=40 Value=cccccccc 12:45:21 SkyScan query 12:45:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:45:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:21 Parameters OK 12:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:21 Set A/D data flow result=40 12:45:21 Set A/D channel type result=40 12:45:21 Set A/D encoding result=40 12:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:21 Set channel filter=0.000000e+000 result=40 12:45:21 Config A/D Result=40 12:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:21 Get A/D filter: -9.255963e+061 result=40 12:45:21 Get A/D value=-858993460 result=40 12:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:21 Parameters OK 12:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:21 Set A/D data flow result=40 12:45:21 Set A/D channel type result=40 12:45:21 Set A/D encoding result=40 12:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:21 Set channel filter=0.000000e+000 result=40 12:45:21 Config A/D Result=40 12:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:21 Get A/D filter: -9.255963e+061 result=40 12:45:21 Get A/D value=-858993460 result=40 12:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:21 Aux= 12:45:21 Message to Camera, serial 274931 queued 12:45:27 Received message from Master: op=Identify serial=274932 12:45:58 Received message from Master: op=PointingHead serial=274947 12:45:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:45:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:45:59 Point started: ret=0 12:45:59 point_skyscan result=0 12:45:59 Check angles 12:45:59 SkyScan query 12:46:00 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 12:46:00 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 12:46:00 Check angles [UTC 2018-12-19 12:46:00] 12:46:00 SkyScan query 12:46:01 SkyScan query done: ret=0 az=128.115<-8541 ze=38.505<-9433 Statuses=0009 0008 12:46:01 Msec=750 True Az=128.115 Ze=38.505 Az status=0009 Ze status=0008 12:46:01 Check angles 12:46:01 SkyScan query 12:46:01 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 12:46:01 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 12:46:02 Check angles 12:46:02 SkyScan query 12:46:02 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 12:46:02 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 12:46:02 Check angles 12:46:02 SkyScan query 12:46:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:46:03 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:46:03 Check angles 12:46:03 SkyScan query 12:46:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:46:04 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:46:04 Message to Master queued w/err=0: serial=274947 error=0 12:46:09 Received message from Master: op=Filter serial=274948 12:46:09 Color wheel filter change from 0 to 0 12:46:09 FLIGetFilterPos err=0 currentPosition=0 12:46:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:09 Filter is already there-color wheel unchanged 12:46:09 Received message from Master: op=Shutter serial=274949 12:46:09 Shutter LASER close 12:46:09 Received message from Camera: op=State serial=274951 12:46:09 GetSingleValue result=40 Value=cccccccc 12:46:09 SkyScan query 12:46:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:46:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:10 Parameters OK 12:46:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:10 Set A/D data flow result=40 12:46:10 Set A/D channel type result=40 12:46:10 Set A/D encoding result=40 12:46:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:10 Set channel filter=0.000000e+000 result=40 12:46:10 Config A/D Result=40 12:46:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:10 Get A/D filter: -9.255963e+061 result=40 12:46:10 Get A/D value=-858993460 result=40 12:46:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:10 Parameters OK 12:46:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:10 Set A/D data flow result=40 12:46:10 Set A/D channel type result=40 12:46:10 Set A/D encoding result=40 12:46:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:10 Set channel filter=0.000000e+000 result=40 12:46:10 Config A/D Result=40 12:46:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:10 Get A/D filter: -9.255963e+061 result=40 12:46:10 Get A/D value=-858993460 result=40 12:46:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:10 Aux= 12:46:10 Message to Camera, serial 274951 queued 12:46:46 Received message from Master: op=PointingHead serial=274964 12:46:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:46:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:46:47 Point started: ret=0 12:46:47 point_skyscan result=0 12:46:48 Check angles 12:46:48 SkyScan query 12:46:48 SkyScan query done: ret=0 az=153.165<-10211 ze=68.145<-7457 Statuses=0009 0009 12:46:48 Msec=0 True Az=153.165 Ze=68.145 Az status=0009 Ze status=0009 12:46:48 Check angles 12:46:48 SkyScan query 12:46:49 SkyScan query done: ret=0 az=135.3<-9020 ze=89.595<-6027 Statuses=0009 0009 12:46:49 Msec=750 True Az=135.3 Ze=89.595 Az status=0009 Ze status=0009 12:46:49 Check angles 12:46:49 SkyScan query 12:46:50 SkyScan query done: ret=0 az=117.825<-7855 ze=110.49<-4634 Statuses=0009 0009 12:46:50 Msec=1500 True Az=117.825 Ze=110.49 Az status=0009 Ze status=0009 12:46:50 Check angles 12:46:50 SkyScan query 12:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=131.49<-3234 Statuses=0008 0009 12:46:50 Msec=2250 True Az=112.995 Ze=131.49 Az status=0008 Ze status=0009 12:46:51 Check angles 12:46:51 SkyScan query 12:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=152.82<-1812 Statuses=0008 0009 12:46:51 Msec=3000 True Az=112.995 Ze=152.82 Az status=0008 Ze status=0009 12:46:51 Check angles 12:46:51 SkyScan query 12:46:52 SkyScan query done: ret=0 az=112.995<-7533 ze=173.79<-414 Statuses=0008 0009 12:46:52 Msec=3750 True Az=112.995 Ze=173.79 Az status=0008 Ze status=0009 12:46:52 Check angles 12:46:52 SkyScan query 12:46:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 12:46:53 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 12:46:53 Message to Master queued w/err=0: serial=274964 error=0 12:46:58 Received message from Master: op=Filter serial=274965 12:46:58 Color wheel filter change from 0 to 0 12:46:58 FLIGetFilterPos err=0 currentPosition=0 12:46:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:58 Filter is already there-color wheel unchanged 12:46:58 Received message from Master: op=Shutter serial=274966 12:46:58 Shutter LASER open 12:46:58 Received message from Camera: op=State serial=274968 12:46:58 GetSingleValue result=40 Value=cccccccc 12:46:58 SkyScan query 12:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:46:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:59 Parameters OK 12:46:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:59 Set A/D data flow result=40 12:46:59 Set A/D channel type result=40 12:46:59 Set A/D encoding result=40 12:46:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:59 Set channel filter=0.000000e+000 result=40 12:46:59 Config A/D Result=40 12:46:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:59 Get A/D filter: -9.255963e+061 result=40 12:46:59 Get A/D value=-858993460 result=40 12:46:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:59 Parameters OK 12:46:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:59 Set A/D data flow result=40 12:46:59 Set A/D channel type result=40 12:46:59 Set A/D encoding result=40 12:46:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:59 Set channel filter=0.000000e+000 result=40 12:46:59 Config A/D Result=40 12:46:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:59 Get A/D filter: -9.255963e+061 result=40 12:46:59 Get A/D value=-858993460 result=40 12:46:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:59 Aux= 12:46:59 Message to Camera, serial 274968 queued 12:47:07 Received message from Master: op=Shutter serial=274978 12:47:07 Shutter LASER close 12:47:08 Received message from Master: op=PointingHead serial=274982 12:47:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:47:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:47:08 Point started: ret=0 12:47:08 point_skyscan result=0 12:47:09 Check angles 12:47:09 SkyScan query 12:47:09 SkyScan query done: ret=0 az=90.045<-6003 ze=157.365<-1509 Statuses=0009 0009 12:47:09 Msec=0 True Az=90.045 Ze=157.365 Az status=0009 Ze status=0009 12:47:09 Check angles 12:47:09 SkyScan query 12:47:10 SkyScan query done: ret=0 az=72.12<-4808 ze=135.93<-2938 Statuses=0009 0009 12:47:10 Msec=750 True Az=72.12 Ze=135.93 Az status=0009 Ze status=0009 12:47:10 Check angles 12:47:10 SkyScan query 12:47:11 SkyScan query done: ret=0 az=54.765<-3651 ze=114.99<-4334 Statuses=0009 0009 12:47:11 Msec=1500 True Az=54.765 Ze=114.99 Az status=0009 Ze status=0009 12:47:11 Check angles 12:47:11 SkyScan query 12:47:11 SkyScan query done: ret=0 az=40.98<-2732 ze=93.99<-5734 Statuses=0009 0009 12:47:11 Msec=2250 True Az=40.98 Ze=93.99 Az status=0009 Ze status=0009 12:47:12 Check angles 12:47:12 SkyScan query 12:47:12 SkyScan query done: ret=0 az=40.995<-2733 ze=72.57<-7162 Statuses=0008 0009 12:47:12 Msec=3000 True Az=40.995 Ze=72.57 Az status=0008 Ze status=0009 12:47:12 Check angles 12:47:12 SkyScan query 12:47:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.14<-8524 Statuses=0008 0009 12:47:13 Msec=3750 True Az=40.995 Ze=52.14 Az status=0008 Ze status=0009 12:47:13 Check angles 12:47:13 SkyScan query 12:47:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:47:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:47:14 Message to Master queued w/err=0: serial=274982 error=0 12:47:19 Received message from Master: op=Filter serial=274983 12:47:19 Color wheel filter change from 0 to 0 12:47:19 FLIGetFilterPos err=0 currentPosition=0 12:47:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:19 Filter is already there-color wheel unchanged 12:47:19 Received message from Master: op=Shutter serial=274984 12:47:19 Shutter LASER close 12:47:19 Received message from Camera: op=State serial=274986 12:47:19 GetSingleValue result=40 Value=cccccccc 12:47:19 SkyScan query 12:47:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:47:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:20 Parameters OK 12:47:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:20 Set A/D data flow result=40 12:47:20 Set A/D channel type result=40 12:47:20 Set A/D encoding result=40 12:47:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:20 Set channel filter=0.000000e+000 result=40 12:47:20 Config A/D Result=40 12:47:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:20 Get A/D filter: -9.255963e+061 result=40 12:47:20 Get A/D value=-858993460 result=40 12:47:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:20 Parameters OK 12:47:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:20 Set A/D data flow result=40 12:47:20 Set A/D channel type result=40 12:47:20 Set A/D encoding result=40 12:47:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:20 Set channel filter=0.000000e+000 result=40 12:47:20 Config A/D Result=40 12:47:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:20 Get A/D filter: -9.255963e+061 result=40 12:47:20 Get A/D value=-858993460 result=40 12:47:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:20 Aux= 12:47:20 Message to Camera, serial 274986 queued 12:47:57 Received message from Master: op=PointingHead serial=274999 12:47:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:47:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:47:57 Point started: ret=0 12:47:57 point_skyscan result=0 12:47:58 Check angles 12:47:58 SkyScan query 12:47:58 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 12:47:58 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 12:47:58 Check angles 12:47:58 SkyScan query 12:47:59 SkyScan query done: ret=0 az=82.095<-5473 ze=66.495<-7567 Statuses=0009 0008 12:47:59 Msec=750 True Az=82.095 Ze=66.495 Az status=0009 Ze status=0008 12:47:59 Check angles 12:47:59 SkyScan query 12:48:00 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 12:48:00 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 12:48:00 Check angles 12:48:00 SkyScan query 12:48:01 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 12:48:01 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 12:48:01 Check angles 12:48:01 SkyScan query 12:48:01 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 12:48:01 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 12:48:01 Check angles 12:48:01 SkyScan query 12:48:02 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 12:48:02 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 12:48:02 Check angles 12:48:02 SkyScan query 12:48:03 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:48:03 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:48:03 Message to Master queued w/err=0: serial=274999 error=0 12:48:08 Received message from Master: op=Filter serial=275000 12:48:08 Color wheel filter change from 0 to 0 12:48:08 FLIGetFilterPos err=0 currentPosition=0 12:48:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:08 Filter is already there-color wheel unchanged 12:48:08 Received message from Master: op=Shutter serial=275001 12:48:08 Shutter LASER close 12:48:08 Received message from Camera: op=State serial=275003 12:48:08 GetSingleValue result=40 Value=cccccccc 12:48:08 SkyScan query 12:48:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:48:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:09 Parameters OK 12:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:09 Set A/D data flow result=40 12:48:09 Set A/D channel type result=40 12:48:09 Set A/D encoding result=40 12:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:09 Set channel filter=0.000000e+000 result=40 12:48:09 Config A/D Result=40 12:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:09 Get A/D filter: -9.255963e+061 result=40 12:48:09 Get A/D value=-858993460 result=40 12:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:09 Parameters OK 12:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:09 Set A/D data flow result=40 12:48:09 Set A/D channel type result=40 12:48:09 Set A/D encoding result=40 12:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:09 Set channel filter=0.000000e+000 result=40 12:48:09 Config A/D Result=40 12:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:09 Get A/D filter: -9.255963e+061 result=40 12:48:09 Get A/D value=-858993460 result=40 12:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:09 Aux= 12:48:09 Message to Camera, serial 275003 queued 12:48:45 Received message from Master: op=PointingHead serial=275016 12:48:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:48:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:48:46 Point started: ret=0 12:48:46 point_skyscan result=0 12:48:46 Check angles 12:48:46 SkyScan query 12:48:47 SkyScan query done: ret=0 az=134.745<-8983 ze=36.42<-9572 Statuses=0009 0009 12:48:47 Msec=0 True Az=134.745 Ze=36.42 Az status=0009 Ze status=0009 12:48:47 Check angles 12:48:47 SkyScan query 12:48:48 SkyScan query done: ret=0 az=116.94<-7796 ze=15<-11000 Statuses=0009 0009 12:48:48 Msec=750 True Az=116.94 Ze=15 Az status=0009 Ze status=0009 12:48:48 Check angles 12:48:48 SkyScan query 12:48:49 SkyScan query done: ret=0 az=99.06<-6604 ze=-6.465<-12431 Statuses=0009 0009 12:48:49 Msec=1500 True Az=99.06 Ze=-6.465 Az status=0009 Ze status=0009 12:48:49 Check angles 12:48:49 SkyScan query 12:48:49 SkyScan query done: ret=0 az=81.705<-5447 ze=-27.42<-13828 Statuses=0009 0009 12:48:49 Msec=2250 True Az=81.705 Ze=-27.42 Az status=0009 Ze status=0009 12:48:50 Check angles 12:48:50 SkyScan query 12:48:50 SkyScan query done: ret=0 az=64.155<-4277 ze=-38.565<-14571 Statuses=0009 0008 12:48:50 Msec=3000 True Az=64.155 Ze=-38.565 Az status=0009 Ze status=0008 12:48:50 Check angles 12:48:50 SkyScan query 12:48:51 SkyScan query done: ret=0 az=46.725<-3115 ze=-38.52<-14568 Statuses=0009 0008 12:48:51 Msec=3750 True Az=46.725 Ze=-38.52 Az status=0009 Ze status=0008 12:48:51 Check angles 12:48:51 SkyScan query 12:48:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:48:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:48:52 Message to Master queued w/err=0: serial=275016 error=0 12:48:57 Received message from Master: op=Filter serial=275017 12:48:57 Color wheel filter change from 0 to 0 12:48:57 FLIGetFilterPos err=0 currentPosition=0 12:48:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:57 Filter is already there-color wheel unchanged 12:48:57 Received message from Master: op=Shutter serial=275018 12:48:57 Shutter LASER close 12:48:57 Received message from Camera: op=State serial=275020 12:48:57 GetSingleValue result=40 Value=cccccccc 12:48:57 SkyScan query 12:48:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:48:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:57 Parameters OK 12:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:57 Set A/D data flow result=40 12:48:57 Set A/D channel type result=40 12:48:57 Set A/D encoding result=40 12:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:57 Set channel filter=0.000000e+000 result=40 12:48:57 Config A/D Result=40 12:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:57 Get A/D filter: -9.255963e+061 result=40 12:48:57 Get A/D value=-858993460 result=40 12:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:57 Parameters OK 12:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:57 Set A/D data flow result=40 12:48:57 Set A/D channel type result=40 12:48:57 Set A/D encoding result=40 12:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:57 Set channel filter=0.000000e+000 result=40 12:48:57 Config A/D Result=40 12:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:57 Get A/D filter: -9.255963e+061 result=40 12:48:57 Get A/D value=-858993460 result=40 12:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:57 Aux= 12:48:57 Message to Camera, serial 275020 queued 12:49:34 Received message from Master: op=PointingHead serial=275033 12:49:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:49:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:49:35 Point started: ret=0 12:49:35 point_skyscan result=0 12:49:35 Check angles 12:49:35 SkyScan query 12:49:36 SkyScan query done: ret=0 az=63.78<-4252 ze=-67.965<-16531 Statuses=0009 0009 12:49:36 Msec=0 True Az=63.78 Ze=-67.965 Az status=0009 Ze status=0009 12:49:36 Check angles 12:49:36 SkyScan query 12:49:37 SkyScan query done: ret=0 az=81.405<-5427 ze=-89.43<-17962 Statuses=0009 0009 12:49:37 Msec=750 True Az=81.405 Ze=-89.43 Az status=0009 Ze status=0009 12:49:37 Check angles 12:49:37 SkyScan query 12:49:37 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.82<-19388 Statuses=0009 0009 12:49:37 Msec=1500 True Az=99.375 Ze=-110.82 Az status=0009 Ze status=0009 12:49:38 Check angles 12:49:38 SkyScan query 12:49:38 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.7<-20780 Statuses=0009 0009 12:49:38 Msec=2250 True Az=116.775 Ze=-131.7 Az status=0009 Ze status=0009 12:49:38 Check angles 12:49:38 SkyScan query 12:49:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 12:49:39 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 12:49:39 Check angles 12:49:39 SkyScan query 12:49:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:49:40 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:49:40 Message to Master queued w/err=0: serial=275033 error=0 12:49:45 Received message from Master: op=Filter serial=275034 12:49:45 Color wheel filter change from 0 to 0 12:49:45 FLIGetFilterPos err=0 currentPosition=0 12:49:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:45 Filter is already there-color wheel unchanged 12:49:45 Received message from Master: op=Shutter serial=275035 12:49:45 Shutter LASER close 12:49:45 Received message from Camera: op=State serial=275037 12:49:45 GetSingleValue result=40 Value=cccccccc 12:49:45 SkyScan query 12:49:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:49:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:45 Parameters OK 12:49:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:45 Set A/D data flow result=40 12:49:45 Set A/D channel type result=40 12:49:45 Set A/D encoding result=40 12:49:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:45 Set channel filter=0.000000e+000 result=40 12:49:45 Config A/D Result=40 12:49:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:45 Get A/D filter: -9.255963e+061 result=40 12:49:45 Get A/D value=-858993460 result=40 12:49:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:45 Parameters OK 12:49:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:45 Set A/D data flow result=40 12:49:45 Set A/D channel type result=40 12:49:45 Set A/D encoding result=40 12:49:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:45 Set channel filter=0.000000e+000 result=40 12:49:45 Config A/D Result=40 12:49:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:45 Get A/D filter: -9.255963e+061 result=40 12:49:45 Get A/D value=-858993460 result=40 12:49:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:45 Aux= 12:49:45 Message to Camera, serial 275037 queued 12:50:22 Received message from Master: op=PointingHead serial=275050 12:50:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:50:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:50:23 Point started: ret=0 12:50:23 point_skyscan result=0 12:50:23 Check angles 12:50:23 SkyScan query 12:50:24 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 12:50:24 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 12:50:24 Check angles 12:50:24 SkyScan query 12:50:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:50:25 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:50:25 Message to Master queued w/err=0: serial=275050 error=0 12:50:30 Received message from Master: op=Filter serial=275051 12:50:30 Color wheel filter change from 0 to 0 12:50:30 FLIGetFilterPos err=0 currentPosition=0 12:50:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:30 Filter is already there-color wheel unchanged 12:50:30 Received message from Master: op=Shutter serial=275052 12:50:30 Shutter LASER open 12:50:30 Received message from Camera: op=State serial=275054 12:50:30 GetSingleValue result=40 Value=cccccccc 12:50:30 SkyScan query 12:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:50:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:31 Parameters OK 12:50:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:31 Set A/D data flow result=40 12:50:31 Set A/D channel type result=40 12:50:31 Set A/D encoding result=40 12:50:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:31 Set channel filter=0.000000e+000 result=40 12:50:31 Config A/D Result=40 12:50:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:31 Get A/D filter: -9.255963e+061 result=40 12:50:31 Get A/D value=-858993460 result=40 12:50:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:31 Parameters OK 12:50:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:31 Set A/D data flow result=40 12:50:31 Set A/D channel type result=40 12:50:31 Set A/D encoding result=40 12:50:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:31 Set channel filter=0.000000e+000 result=40 12:50:31 Config A/D Result=40 12:50:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:31 Get A/D filter: -9.255963e+061 result=40 12:50:31 Get A/D value=-858993460 result=40 12:50:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:31 Aux= 12:50:31 Message to Camera, serial 275054 queued 12:50:39 Received message from Master: op=Shutter serial=275064 12:50:39 Shutter LASER close 12:50:40 Received message from Master: op=PointingHead serial=275068 12:50:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:50:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:50:40 Point started: ret=0 12:50:40 point_skyscan result=0 12:50:41 Check angles 12:50:41 SkyScan query 12:50:41 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.49<-21566 Statuses=0009 0009 12:50:41 Msec=0 True Az=135.84 Ze=-143.49 Az status=0009 Ze status=0009 12:50:41 Check angles 12:50:41 SkyScan query 12:50:42 SkyScan query done: ret=0 az=153.285<-10219 ze=-122.475<-20165 Statuses=0009 0009 12:50:42 Msec=750 True Az=153.285 Ze=-122.475 Az status=0009 Ze status=0009 12:50:42 Check angles 12:50:42 SkyScan query 12:50:43 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.625<-18775 Statuses=0009 0009 12:50:43 Msec=1500 True Az=170.76 Ze=-101.625 Az status=0009 Ze status=0009 12:50:43 Check angles 12:50:43 SkyScan query 12:50:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.58<-17372 Statuses=0008 0009 12:50:44 Msec=2250 True Az=175.995 Ze=-80.58 Az status=0008 Ze status=0009 12:50:44 Check angles 12:50:44 SkyScan query 12:50:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.205<-15947 Statuses=0008 0009 12:50:44 Msec=3000 True Az=175.995 Ze=-59.205 Az status=0008 Ze status=0009 12:50:44 Check angles 12:50:44 SkyScan query 12:50:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 12:50:45 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 12:50:45 Message to Master queued w/err=0: serial=275068 error=0 12:50:50 Received message from Master: op=Filter serial=275069 12:50:50 Color wheel filter change from 0 to 0 12:50:50 FLIGetFilterPos err=0 currentPosition=0 12:50:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:50 Filter is already there-color wheel unchanged 12:50:50 Received message from Master: op=Shutter serial=275070 12:50:50 Shutter LASER close 12:50:50 Received message from Camera: op=State serial=275072 12:50:50 GetSingleValue result=40 Value=cccccccc 12:50:50 SkyScan query 12:50:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:50:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:51 Parameters OK 12:50:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:51 Set A/D data flow result=40 12:50:51 Set A/D channel type result=40 12:50:51 Set A/D encoding result=40 12:50:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:51 Set channel filter=0.000000e+000 result=40 12:50:51 Config A/D Result=40 12:50:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:51 Get A/D filter: -9.255963e+061 result=40 12:50:51 Get A/D value=-858993460 result=40 12:50:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:51 Parameters OK 12:50:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:51 Set A/D data flow result=40 12:50:51 Set A/D channel type result=40 12:50:51 Set A/D encoding result=40 12:50:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:51 Set channel filter=0.000000e+000 result=40 12:50:51 Config A/D Result=40 12:50:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:51 Get A/D filter: -9.255963e+061 result=40 12:50:51 Get A/D value=-858993460 result=40 12:50:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:51 Aux= 12:50:51 Message to Camera, serial 275072 queued 12:51:28 Received message from Master: op=PointingHead serial=275085 12:51:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:51:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:51:28 Point started: ret=0 12:51:28 point_skyscan result=0 12:51:29 Check angles 12:51:29 SkyScan query 12:51:30 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.72<-13448 Statuses=0009 0009 12:51:30 Msec=0 True Az=152.955 Ze=-21.72 Az status=0009 Ze status=0009 12:51:30 Check angles 12:51:30 SkyScan query 12:51:30 SkyScan query done: ret=0 az=135.555<-9037 ze=-0.705<-12047 Statuses=0009 0009 12:51:30 Msec=750 True Az=135.555 Ze=-0.705 Az status=0009 Ze status=0009 12:51:30 Check angles 12:51:30 SkyScan query 12:51:31 SkyScan query done: ret=0 az=117.99<-7866 ze=20.28<-10648 Statuses=0009 0009 12:51:31 Msec=1500 True Az=117.99 Ze=20.28 Az status=0009 Ze status=0009 12:51:31 Check angles 12:51:31 SkyScan query 12:51:32 SkyScan query done: ret=0 az=100.515<-6701 ze=41.235<-9251 Statuses=0009 0009 12:51:32 Msec=2250 True Az=100.515 Ze=41.235 Az status=0009 Ze status=0009 12:51:32 Check angles 12:51:32 SkyScan query 12:51:33 SkyScan query done: ret=0 az=85.98<-5732 ze=51.585<-8561 Statuses=0009 0008 12:51:33 Msec=3000 True Az=85.98 Ze=51.585 Az status=0009 Ze status=0008 12:51:33 Check angles 12:51:33 SkyScan query 12:51:33 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 12:51:33 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 12:51:33 Message to Master queued w/err=0: serial=275085 error=0 12:51:38 Received message from Master: op=Filter serial=275086 12:51:38 Color wheel filter change from 0 to 0 12:51:38 FLIGetFilterPos err=0 currentPosition=0 12:51:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:38 Filter is already there-color wheel unchanged 12:51:38 Received message from Master: op=Shutter serial=275087 12:51:38 Shutter LASER close 12:51:38 Received message from Camera: op=State serial=275089 12:51:38 GetSingleValue result=40 Value=cccccccc 12:51:38 SkyScan query 12:51:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:51:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:39 Parameters OK 12:51:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:39 Set A/D data flow result=40 12:51:39 Set A/D channel type result=40 12:51:39 Set A/D encoding result=40 12:51:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:39 Set channel filter=0.000000e+000 result=40 12:51:39 Config A/D Result=40 12:51:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:39 Get A/D filter: -9.255963e+061 result=40 12:51:39 Get A/D value=-858993460 result=40 12:51:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:39 Parameters OK 12:51:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:39 Set A/D data flow result=40 12:51:39 Set A/D channel type result=40 12:51:39 Set A/D encoding result=40 12:51:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:39 Set channel filter=0.000000e+000 result=40 12:51:39 Config A/D Result=40 12:51:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:39 Get A/D filter: -9.255963e+061 result=40 12:51:39 Get A/D value=-858993460 result=40 12:51:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:39 Aux= 12:51:39 Message to Camera, serial 275089 queued 12:52:16 Received message from Master: op=PointingHead serial=275102 12:52:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:52:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:52:16 Point started: ret=0 12:52:16 point_skyscan result=0 12:52:17 Check angles 12:52:17 SkyScan query 12:52:18 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 12:52:18 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 12:52:18 Check angles 12:52:18 SkyScan query 12:52:18 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 12:52:18 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 12:52:18 Check angles 12:52:18 SkyScan query 12:52:19 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 12:52:19 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 12:52:19 Check angles 12:52:19 SkyScan query 12:52:20 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 12:52:20 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 12:52:20 Check angles 12:52:20 SkyScan query 12:52:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:52:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:52:21 Check angles 12:52:21 SkyScan query 12:52:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:52:21 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:52:21 Message to Master queued w/err=0: serial=275102 error=0 12:52:26 Received message from Master: op=Filter serial=275103 12:52:26 Color wheel filter change from 0 to 0 12:52:26 FLIGetFilterPos err=0 currentPosition=0 12:52:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:26 Filter is already there-color wheel unchanged 12:52:27 Received message from Master: op=Shutter serial=275104 12:52:27 Shutter LASER close 12:52:27 Received message from Camera: op=State serial=275106 12:52:27 GetSingleValue result=40 Value=cccccccc 12:52:27 SkyScan query 12:52:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:52:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:27 Parameters OK 12:52:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:27 Set A/D data flow result=40 12:52:27 Set A/D channel type result=40 12:52:27 Set A/D encoding result=40 12:52:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:27 Set channel filter=0.000000e+000 result=40 12:52:27 Config A/D Result=40 12:52:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:27 Get A/D filter: -9.255963e+061 result=40 12:52:27 Get A/D value=-858993460 result=40 12:52:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:27 Parameters OK 12:52:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:27 Set A/D data flow result=40 12:52:27 Set A/D channel type result=40 12:52:27 Set A/D encoding result=40 12:52:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:27 Set channel filter=0.000000e+000 result=40 12:52:27 Config A/D Result=40 12:52:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:27 Get A/D filter: -9.255963e+061 result=40 12:52:27 Get A/D value=-858993460 result=40 12:52:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:27 Aux= 12:52:27 Message to Camera, serial 275106 queued 12:53:04 Received message from Master: op=PointingHead serial=275119 12:53:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:53:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:53:05 Point started: ret=0 12:53:05 point_skyscan result=0 12:53:05 Check angles 12:53:05 SkyScan query 12:53:06 SkyScan query done: ret=0 az=152.985<-10199 ze=68.325<-7445 Statuses=0009 0009 12:53:06 Msec=0 True Az=152.985 Ze=68.325 Az status=0009 Ze status=0009 12:53:06 Check angles 12:53:06 SkyScan query 12:53:07 SkyScan query done: ret=0 az=135.435<-9029 ze=89.34<-6044 Statuses=0009 0009 12:53:07 Msec=750 True Az=135.435 Ze=89.34 Az status=0009 Ze status=0009 12:53:07 Check angles 12:53:07 SkyScan query 12:53:07 SkyScan query done: ret=0 az=117.705<-7847 ze=110.655<-4623 Statuses=0009 0009 12:53:07 Msec=1500 True Az=117.705 Ze=110.655 Az status=0009 Ze status=0009 12:53:08 Check angles 12:53:08 SkyScan query 12:53:08 SkyScan query done: ret=0 az=112.98<-7532 ze=131.655<-3223 Statuses=0008 0009 12:53:08 Msec=2250 True Az=112.98 Ze=131.655 Az status=0008 Ze status=0009 12:53:08 Check angles 12:53:08 SkyScan query 12:53:09 SkyScan query done: ret=0 az=112.995<-7533 ze=152.55<-1830 Statuses=0008 0009 12:53:09 Msec=3000 True Az=112.995 Ze=152.55 Az status=0008 Ze status=0009 12:53:09 Check angles 12:53:09 SkyScan query 12:53:10 SkyScan query done: ret=0 az=112.995<-7533 ze=173.97<-402 Statuses=0008 0009 12:53:10 Msec=3750 True Az=112.995 Ze=173.97 Az status=0008 Ze status=0009 12:53:10 Check angles 12:53:10 SkyScan query 12:53:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 12:53:10 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 12:53:10 Message to Master queued w/err=0: serial=275119 error=0 12:53:15 Received message from Master: op=Filter serial=275120 12:53:15 Color wheel filter change from 0 to 0 12:53:15 FLIGetFilterPos err=0 currentPosition=0 12:53:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:15 Filter is already there-color wheel unchanged 12:53:16 Received message from Master: op=Shutter serial=275121 12:53:16 Shutter LASER open 12:53:16 Received message from Camera: op=State serial=275123 12:53:16 GetSingleValue result=40 Value=cccccccc 12:53:16 SkyScan query 12:53:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:53:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:16 Parameters OK 12:53:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:16 Set A/D data flow result=40 12:53:16 Set A/D channel type result=40 12:53:16 Set A/D encoding result=40 12:53:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:16 Set channel filter=0.000000e+000 result=40 12:53:16 Config A/D Result=40 12:53:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:16 Get A/D filter: -9.255963e+061 result=40 12:53:16 Get A/D value=-858993460 result=40 12:53:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:16 Parameters OK 12:53:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:16 Set A/D data flow result=40 12:53:16 Set A/D channel type result=40 12:53:16 Set A/D encoding result=40 12:53:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:16 Set channel filter=0.000000e+000 result=40 12:53:16 Config A/D Result=40 12:53:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:16 Get A/D filter: -9.255963e+061 result=40 12:53:16 Get A/D value=-858993460 result=40 12:53:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:16 Aux= 12:53:16 Message to Camera, serial 275123 queued 12:53:25 Received message from Master: op=Shutter serial=275133 12:53:25 Shutter LASER close 12:53:25 Received message from Master: op=PointingHead serial=275137 12:53:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:53:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:53:26 Point started: ret=0 12:53:26 point_skyscan result=0 12:53:26 Check angles 12:53:26 SkyScan query 12:53:27 SkyScan query done: ret=0 az=90.12<-6008 ze=157.44<-1504 Statuses=0009 0009 12:53:27 Msec=0 True Az=90.12 Ze=157.44 Az status=0009 Ze status=0009 12:53:27 Check angles 12:53:27 SkyScan query 12:53:28 SkyScan query done: ret=0 az=72.285<-4819 ze=136.02<-2932 Statuses=0009 0009 12:53:28 Msec=750 True Az=72.285 Ze=136.02 Az status=0009 Ze status=0009 12:53:28 Check angles 12:53:28 SkyScan query 12:53:28 SkyScan query done: ret=0 az=54.84<-3656 ze=115.08<-4328 Statuses=0009 0009 12:53:28 Msec=1500 True Az=54.84 Ze=115.08 Az status=0009 Ze status=0009 12:53:29 Check angles 12:53:29 SkyScan query 12:53:29 SkyScan query done: ret=0 az=40.98<-2732 ze=94.065<-5729 Statuses=0009 0009 12:53:29 Msec=2250 True Az=40.98 Ze=94.065 Az status=0009 Ze status=0009 12:53:29 Check angles 12:53:29 SkyScan query 12:53:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.675<-7155 Statuses=0008 0009 12:53:30 Msec=3000 True Az=40.995 Ze=72.675 Az status=0008 Ze status=0009 12:53:30 Check angles 12:53:30 SkyScan query 12:53:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 12:53:31 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 12:53:31 Check angles 12:53:31 SkyScan query 12:53:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:53:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:53:31 Message to Master queued w/err=0: serial=275137 error=0 12:53:36 Received message from Master: op=Filter serial=275138 12:53:36 Color wheel filter change from 0 to 0 12:53:36 FLIGetFilterPos err=0 currentPosition=0 12:53:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:36 Filter is already there-color wheel unchanged 12:53:37 Received message from Master: op=Shutter serial=275139 12:53:37 Shutter LASER close 12:53:37 Received message from Camera: op=State serial=275141 12:53:37 GetSingleValue result=40 Value=cccccccc 12:53:37 SkyScan query 12:53:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:53:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:37 Parameters OK 12:53:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:37 Set A/D data flow result=40 12:53:37 Set A/D channel type result=40 12:53:37 Set A/D encoding result=40 12:53:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:37 Set channel filter=0.000000e+000 result=40 12:53:37 Config A/D Result=40 12:53:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:37 Get A/D filter: -9.255963e+061 result=40 12:53:37 Get A/D value=-858993460 result=40 12:53:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:37 Parameters OK 12:53:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:37 Set A/D data flow result=40 12:53:37 Set A/D channel type result=40 12:53:37 Set A/D encoding result=40 12:53:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:37 Set channel filter=0.000000e+000 result=40 12:53:37 Config A/D Result=40 12:53:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:37 Get A/D filter: -9.255963e+061 result=40 12:53:37 Get A/D value=-858993460 result=40 12:53:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:37 Aux= 12:53:37 Message to Camera, serial 275141 queued 12:54:14 Received message from Master: op=PointingHead serial=275154 12:54:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:54:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:54:14 Point started: ret=0 12:54:14 point_skyscan result=0 12:54:15 Check angles 12:54:15 SkyScan query 12:54:16 SkyScan query done: ret=0 az=63.735<-4249 ze=66.57<-7562 Statuses=0009 0008 12:54:16 Msec=0 True Az=63.735 Ze=66.57 Az status=0009 Ze status=0008 12:54:16 Check angles 12:54:16 SkyScan query 12:54:17 SkyScan query done: ret=0 az=81.135<-5409 ze=66.495<-7567 Statuses=0009 0008 12:54:17 Msec=750 True Az=81.135 Ze=66.495 Az status=0009 Ze status=0008 12:54:17 Check angles 12:54:17 SkyScan query 12:54:17 SkyScan query done: ret=0 az=98.565<-6571 ze=66.495<-7567 Statuses=0009 0008 12:54:17 Msec=1500 True Az=98.565 Ze=66.495 Az status=0009 Ze status=0008 12:54:17 Check angles 12:54:17 SkyScan query 12:54:18 SkyScan query done: ret=0 az=116.55<-7770 ze=66.495<-7567 Statuses=0009 0008 12:54:18 Msec=2250 True Az=116.55 Ze=66.495 Az status=0009 Ze status=0008 12:54:18 Check angles 12:54:18 SkyScan query 12:54:19 SkyScan query done: ret=0 az=133.935<-8929 ze=66.495<-7567 Statuses=0009 0008 12:54:19 Msec=3000 True Az=133.935 Ze=66.495 Az status=0009 Ze status=0008 12:54:19 Check angles 12:54:19 SkyScan query 12:54:20 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 12:54:20 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 12:54:20 Check angles 12:54:20 SkyScan query 12:54:20 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:54:20 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:54:20 Message to Master queued w/err=0: serial=275154 error=0 12:54:25 Received message from Master: op=Filter serial=275155 12:54:25 Color wheel filter change from 0 to 0 12:54:25 FLIGetFilterPos err=0 currentPosition=0 12:54:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:25 Filter is already there-color wheel unchanged 12:54:25 Received message from Master: op=Shutter serial=275156 12:54:25 Shutter LASER close 12:54:26 Received message from Camera: op=State serial=275158 12:54:26 GetSingleValue result=40 Value=cccccccc 12:54:26 SkyScan query 12:54:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:54:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:26 Parameters OK 12:54:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:26 Set A/D data flow result=40 12:54:26 Set A/D channel type result=40 12:54:26 Set A/D encoding result=40 12:54:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:26 Set channel filter=0.000000e+000 result=40 12:54:26 Config A/D Result=40 12:54:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:26 Get A/D filter: -9.255963e+061 result=40 12:54:26 Get A/D value=-858993460 result=40 12:54:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:26 Parameters OK 12:54:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:26 Set A/D data flow result=40 12:54:26 Set A/D channel type result=40 12:54:26 Set A/D encoding result=40 12:54:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:26 Set channel filter=0.000000e+000 result=40 12:54:26 Config A/D Result=40 12:54:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:26 Get A/D filter: -9.255963e+061 result=40 12:54:26 Get A/D value=-858993460 result=40 12:54:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:26 Aux= 12:54:26 Message to Camera, serial 275158 queued 12:55:03 Received message from Master: op=PointingHead serial=275171 12:55:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:55:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:55:03 Point started: ret=0 12:55:03 point_skyscan result=0 12:55:04 Check angles 12:55:04 SkyScan query 12:55:05 SkyScan query done: ret=0 az=135.135<-9009 ze=36.825<-9545 Statuses=0009 0009 12:55:05 Msec=0 True Az=135.135 Ze=36.825 Az status=0009 Ze status=0009 12:55:05 Check angles 12:55:05 SkyScan query 12:55:05 SkyScan query done: ret=0 az=117.69<-7846 ze=15.93<-10938 Statuses=0009 0009 12:55:05 Msec=750 True Az=117.69 Ze=15.93 Az status=0009 Ze status=0009 12:55:06 Check angles 12:55:06 SkyScan query 12:55:06 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.415<-12361 Statuses=0009 0009 12:55:06 Msec=1500 True Az=99.93 Ze=-5.415 Az status=0009 Ze status=0009 12:55:06 Check angles 12:55:06 SkyScan query 12:55:07 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.385<-13759 Statuses=0009 0009 12:55:07 Msec=2250 True Az=82.425 Ze=-26.385 Az status=0009 Ze status=0009 12:55:07 Check angles 12:55:07 SkyScan query 12:55:08 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.565<-14571 Statuses=0009 0008 12:55:08 Msec=3000 True Az=64.875 Ze=-38.565 Az status=0009 Ze status=0008 12:55:08 Check angles 12:55:08 SkyScan query 12:55:08 SkyScan query done: ret=0 az=47.085<-3139 ze=-38.535<-14569 Statuses=0009 0008 12:55:08 Msec=3750 True Az=47.085 Ze=-38.535 Az status=0009 Ze status=0008 12:55:09 Check angles 12:55:09 SkyScan query 12:55:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:55:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:55:09 Message to Master queued w/err=0: serial=275171 error=0 12:55:14 Received message from Master: op=Filter serial=275172 12:55:14 Color wheel filter change from 0 to 0 12:55:14 FLIGetFilterPos err=0 currentPosition=0 12:55:14 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:14 Filter is already there-color wheel unchanged 12:55:14 Received message from Master: op=Shutter serial=275173 12:55:14 Shutter LASER close 12:55:14 Received message from Camera: op=State serial=275175 12:55:14 GetSingleValue result=40 Value=cccccccc 12:55:14 SkyScan query 12:55:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:55:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:15 Parameters OK 12:55:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:15 Set A/D data flow result=40 12:55:15 Set A/D channel type result=40 12:55:15 Set A/D encoding result=40 12:55:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:15 Set channel filter=0.000000e+000 result=40 12:55:15 Config A/D Result=40 12:55:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:15 Get A/D filter: -9.255963e+061 result=40 12:55:15 Get A/D value=-858993460 result=40 12:55:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:15 Parameters OK 12:55:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:15 Set A/D data flow result=40 12:55:15 Set A/D channel type result=40 12:55:15 Set A/D encoding result=40 12:55:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:15 Set channel filter=0.000000e+000 result=40 12:55:15 Config A/D Result=40 12:55:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-19 12:55:15] 12:55:15 Get A/D filter: -9.255963e+061 result=40 12:55:15 Get A/D value=-858993460 result=40 12:55:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:15 Aux= 12:55:15 Message to Camera, serial 275175 queued 12:55:51 Received message from Master: op=PointingHead serial=275187 12:55:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:55:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:55:51 Point started: ret=0 12:55:51 point_skyscan result=0 12:55:52 Check angles 12:55:52 SkyScan query 12:55:52 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.34<-16556 Statuses=0009 0009 12:55:52 Msec=0 True Az=64.005 Ze=-68.34 Az status=0009 Ze status=0009 [UTC 2018-12-19 12:55:52] 12:55:53 Check angles 12:55:53 SkyScan query 12:55:53 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.325<-17955 Statuses=0009 0009 12:55:53 Msec=750 True Az=81.39 Ze=-89.325 Az status=0009 Ze status=0009 12:55:53 Check angles 12:55:53 SkyScan query 12:55:54 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.265<-19351 Statuses=0009 0009 12:55:54 Msec=1500 True Az=98.865 Ze=-110.265 Az status=0009 Ze status=0009 12:55:54 Check angles 12:55:54 SkyScan query 12:55:55 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.595<-20773 Statuses=0009 0009 12:55:55 Msec=2250 True Az=116.73 Ze=-131.595 Az status=0009 Ze status=0009 12:55:55 Check angles 12:55:55 SkyScan query 12:55:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 12:55:56 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 12:55:56 Check angles 12:55:56 SkyScan query 12:55:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:55:56 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:55:56 Message to Master queued w/err=0: serial=275187 error=0 12:56:01 Received message from Master: op=Filter serial=275188 12:56:01 Color wheel filter change from 0 to 0 12:56:01 FLIGetFilterPos err=0 currentPosition=0 12:56:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:01 Filter is already there-color wheel unchanged 12:56:01 Received message from Master: op=Shutter serial=275189 12:56:01 Shutter LASER close 12:56:01 Received message from Camera: op=State serial=275191 12:56:01 GetSingleValue result=40 Value=cccccccc 12:56:01 SkyScan query 12:56:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:56:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:02 Parameters OK 12:56:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:02 Set A/D data flow result=40 12:56:02 Set A/D channel type result=40 12:56:02 Set A/D encoding result=40 12:56:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:02 Set channel filter=0.000000e+000 result=40 12:56:02 Config A/D Result=40 12:56:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:02 Get A/D filter: -9.255963e+061 result=40 12:56:02 Get A/D value=-858993460 result=40 12:56:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:02 Parameters OK 12:56:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:02 Set A/D data flow result=40 12:56:02 Set A/D channel type result=40 12:56:02 Set A/D encoding result=40 12:56:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:02 Set channel filter=0.000000e+000 result=40 12:56:02 Config A/D Result=40 12:56:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:02 Get A/D filter: -9.255963e+061 result=40 12:56:02 Get A/D value=-858993460 result=40 12:56:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:02 Aux= 12:56:02 Message to Camera, serial 275191 queued 12:56:39 Received message from Master: op=PointingHead serial=275204 12:56:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:56:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:56:39 Point started: ret=0 12:56:39 point_skyscan result=0 12:56:40 Check angles 12:56:40 SkyScan query 12:56:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0009 0009 12:56:41 Msec=0 True Az=112.995 Ze=-170.865 Az status=0009 Ze status=0009 12:56:41 Check angles 12:56:41 SkyScan query 12:56:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:56:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:56:41 Message to Master queued w/err=0: serial=275204 error=0 12:56:46 Received message from Master: op=Filter serial=275205 12:56:46 Color wheel filter change from 0 to 0 12:56:46 FLIGetFilterPos err=0 currentPosition=0 12:56:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:46 Filter is already there-color wheel unchanged 12:56:46 Received message from Master: op=Shutter serial=275206 12:56:46 Shutter LASER open 12:56:47 Received message from Camera: op=State serial=275208 12:56:47 GetSingleValue result=40 Value=cccccccc 12:56:47 SkyScan query 12:56:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:56:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:47 Parameters OK 12:56:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:47 Set A/D data flow result=40 12:56:47 Set A/D channel type result=40 12:56:47 Set A/D encoding result=40 12:56:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:47 Set channel filter=0.000000e+000 result=40 12:56:47 Config A/D Result=40 12:56:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:47 Get A/D filter: -9.255963e+061 result=40 12:56:47 Get A/D value=-858993460 result=40 12:56:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:47 Parameters OK 12:56:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:47 Set A/D data flow result=40 12:56:47 Set A/D channel type result=40 12:56:47 Set A/D encoding result=40 12:56:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:47 Set channel filter=0.000000e+000 result=40 12:56:47 Config A/D Result=40 12:56:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:47 Get A/D filter: -9.255963e+061 result=40 12:56:47 Get A/D value=-858993460 result=40 12:56:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:47 Aux= 12:56:47 Message to Camera, serial 275208 queued 12:56:56 Received message from Master: op=Shutter serial=275218 12:56:56 Shutter LASER close 12:56:56 Received message from Master: op=PointingHead serial=275222 12:56:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:56:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:56:57 Point started: ret=0 12:56:57 point_skyscan result=0 12:56:57 Check angles 12:56:57 SkyScan query 12:56:58 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.025<-21535 Statuses=0009 0009 12:56:58 Msec=0 True Az=136.185 Ze=-143.025 Az status=0009 Ze status=0009 12:56:58 Check angles 12:56:58 SkyScan query 12:56:59 SkyScan query done: ret=0 az=153.69<-10246 ze=-122.025<-20135 Statuses=0009 0009 12:56:59 Msec=750 True Az=153.69 Ze=-122.025 Az status=0009 Ze status=0009 12:56:59 Check angles 12:56:59 SkyScan query 12:57:00 SkyScan query done: ret=0 az=171.585<-11439 ze=-100.575<-18705 Statuses=0009 0009 12:57:00 Msec=1500 True Az=171.585 Ze=-100.575 Az status=0009 Ze status=0009 12:57:00 Check angles 12:57:00 SkyScan query 12:57:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.71<-17314 Statuses=0008 0009 12:57:00 Msec=2250 True Az=176.01 Ze=-79.71 Az status=0008 Ze status=0009 12:57:00 Check angles 12:57:00 SkyScan query 12:57:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 12:57:01 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 12:57:01 Check angles 12:57:01 SkyScan query 12:57:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 12:57:02 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 12:57:02 Message to Master queued w/err=0: serial=275222 error=0 12:57:07 Received message from Master: op=Filter serial=275223 12:57:07 Color wheel filter change from 0 to 0 12:57:07 FLIGetFilterPos err=0 currentPosition=0 12:57:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:07 Filter is already there-color wheel unchanged 12:57:07 Received message from Master: op=Shutter serial=275224 12:57:07 Shutter LASER close 12:57:07 Received message from Camera: op=State serial=275226 12:57:07 GetSingleValue result=40 Value=cccccccc 12:57:07 SkyScan query 12:57:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:57:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:08 Parameters OK 12:57:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:08 Set A/D data flow result=40 12:57:08 Set A/D channel type result=40 12:57:08 Set A/D encoding result=40 12:57:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:08 Set channel filter=0.000000e+000 result=40 12:57:08 Config A/D Result=40 12:57:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:08 Get A/D filter: -9.255963e+061 result=40 12:57:08 Get A/D value=-858993460 result=40 12:57:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:08 Parameters OK 12:57:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:08 Set A/D data flow result=40 12:57:08 Set A/D channel type result=40 12:57:08 Set A/D encoding result=40 12:57:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:08 Set channel filter=0.000000e+000 result=40 12:57:08 Config A/D Result=40 12:57:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:08 Get A/D filter: -9.255963e+061 result=40 12:57:08 Get A/D value=-858993460 result=40 12:57:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:08 Aux= 12:57:08 Message to Camera, serial 275226 queued 12:57:45 Received message from Master: op=PointingHead serial=275239 12:57:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:57:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:57:45 Point started: ret=0 12:57:45 point_skyscan result=0 12:57:46 Check angles 12:57:46 SkyScan query 12:57:46 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.96<-13464 Statuses=0009 0009 12:57:46 Msec=0 True Az=153.105 Ze=-21.96 Az status=0009 Ze status=0009 12:57:46 Check angles 12:57:46 SkyScan query 12:57:47 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.75<-12050 Statuses=0009 0009 12:57:47 Msec=750 True Az=135.615 Ze=-0.75 Az status=0009 Ze status=0009 12:57:47 Check angles 12:57:47 SkyScan query 12:57:48 SkyScan query done: ret=0 az=118.11<-7874 ze=19.98<-10668 Statuses=0009 0009 12:57:48 Msec=1500 True Az=118.11 Ze=19.98 Az status=0009 Ze status=0009 12:57:48 Check angles 12:57:48 SkyScan query 12:57:49 SkyScan query done: ret=0 az=100.74<-6716 ze=41.04<-9264 Statuses=0009 0009 12:57:49 Msec=2250 True Az=100.74 Ze=41.04 Az status=0009 Ze status=0009 12:57:49 Check angles 12:57:49 SkyScan query 12:57:49 SkyScan query done: ret=0 az=85.98<-5732 ze=51.585<-8561 Statuses=0009 0008 12:57:49 Msec=3000 True Az=85.98 Ze=51.585 Az status=0009 Ze status=0008 12:57:49 Check angles 12:57:49 SkyScan query 12:57:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:57:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:57:50 Message to Master queued w/err=0: serial=275239 error=0 12:57:55 Received message from Master: op=Filter serial=275240 12:57:55 Color wheel filter change from 0 to 0 12:57:55 FLIGetFilterPos err=0 currentPosition=0 12:57:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:55 Filter is already there-color wheel unchanged 12:57:55 Received message from Master: op=Shutter serial=275241 12:57:55 Shutter LASER close 12:57:55 Received message from Camera: op=State serial=275243 12:57:55 GetSingleValue result=40 Value=cccccccc 12:57:55 SkyScan query 12:57:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:57:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:56 Parameters OK 12:57:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:56 Set A/D data flow result=40 12:57:56 Set A/D channel type result=40 12:57:56 Set A/D encoding result=40 12:57:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:56 Set channel filter=0.000000e+000 result=40 12:57:56 Config A/D Result=40 12:57:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:56 Get A/D filter: -9.255963e+061 result=40 12:57:56 Get A/D value=-858993460 result=40 12:57:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:56 Parameters OK 12:57:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:56 Set A/D data flow result=40 12:57:56 Set A/D channel type result=40 12:57:56 Set A/D encoding result=40 12:57:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:56 Set channel filter=0.000000e+000 result=40 12:57:56 Config A/D Result=40 12:57:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:56 Get A/D filter: -9.255963e+061 result=40 12:57:56 Get A/D value=-858993460 result=40 12:57:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:56 Aux= 12:57:56 Message to Camera, serial 275243 queued 12:58:33 Received message from Master: op=PointingHead serial=275256 12:58:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:58:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:58:33 Point started: ret=0 12:58:33 point_skyscan result=0 12:58:34 Check angles 12:58:34 SkyScan query 12:58:34 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 12:58:34 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 12:58:35 Check angles 12:58:35 SkyScan query 12:58:35 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 12:58:35 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 12:58:35 Check angles 12:58:35 SkyScan query 12:58:36 SkyScan query done: ret=0 az=144.015<-9601 ze=38.505<-9433 Statuses=0009 0008 12:58:36 Msec=1500 True Az=144.015 Ze=38.505 Az status=0009 Ze status=0008 12:58:36 Check angles 12:58:36 SkyScan query 12:58:37 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 12:58:37 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 12:58:37 Check angles 12:58:37 SkyScan query 12:58:37 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:58:37 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:58:38 Check angles 12:58:38 SkyScan query 12:58:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:58:38 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:58:38 Message to Master queued w/err=0: serial=275256 error=0 12:58:43 Received message from Master: op=Filter serial=275257 12:58:43 Color wheel filter change from 0 to 0 12:58:43 FLIGetFilterPos err=0 currentPosition=0 12:58:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:43 Filter is already there-color wheel unchanged 12:58:43 Received message from Master: op=Shutter serial=275258 12:58:43 Shutter LASER close 12:58:43 Received message from Camera: op=State serial=275260 12:58:43 GetSingleValue result=40 Value=cccccccc 12:58:43 SkyScan query 12:58:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:58:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:44 Parameters OK 12:58:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:44 Set A/D data flow result=40 12:58:44 Set A/D channel type result=40 12:58:44 Set A/D encoding result=40 12:58:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:44 Set channel filter=0.000000e+000 result=40 12:58:44 Config A/D Result=40 12:58:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:44 Get A/D filter: -9.255963e+061 result=40 12:58:44 Get A/D value=-858993460 result=40 12:58:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:44 Parameters OK 12:58:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:44 Set A/D data flow result=40 12:58:44 Set A/D channel type result=40 12:58:44 Set A/D encoding result=40 12:58:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:44 Set channel filter=0.000000e+000 result=40 12:58:44 Config A/D Result=40 12:58:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:44 Get A/D filter: -9.255963e+061 result=40 12:58:44 Get A/D value=-858993460 result=40 12:58:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:44 Aux= 12:58:44 Message to Camera, serial 275260 queued 12:59:21 Received message from Master: op=PointingHead serial=275273 12:59:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:59:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:59:21 Point started: ret=0 12:59:21 point_skyscan result=0 12:59:22 Check angles 12:59:22 SkyScan query 12:59:23 SkyScan query done: ret=0 az=152.715<-10181 ze=68.685<-7421 Statuses=0009 0009 12:59:23 Msec=0 True Az=152.715 Ze=68.685 Az status=0009 Ze status=0009 12:59:23 Check angles 12:59:23 SkyScan query 12:59:23 SkyScan query done: ret=0 az=135.12<-9008 ze=89.715<-6019 Statuses=0009 0009 12:59:23 Msec=750 True Az=135.12 Ze=89.715 Az status=0009 Ze status=0009 12:59:24 Check angles 12:59:24 SkyScan query 12:59:24 SkyScan query done: ret=0 az=117.63<-7842 ze=110.61<-4626 Statuses=0009 0009 12:59:24 Msec=1500 True Az=117.63 Ze=110.61 Az status=0009 Ze status=0009 12:59:24 Check angles 12:59:24 SkyScan query 12:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=131.625<-3225 Statuses=0008 0009 12:59:25 Msec=2250 True Az=112.995 Ze=131.625 Az status=0008 Ze status=0009 12:59:25 Check angles 12:59:25 SkyScan query 12:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=152.505<-1833 Statuses=0008 0009 12:59:26 Msec=3000 True Az=112.995 Ze=152.505 Az status=0008 Ze status=0009 12:59:26 Check angles 12:59:26 SkyScan query 12:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=173.505<-433 Statuses=0008 0009 12:59:26 Msec=3750 True Az=112.995 Ze=173.505 Az status=0008 Ze status=0009 12:59:27 Check angles 12:59:27 SkyScan query 12:59:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 12:59:27 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 12:59:27 Message to Master queued w/err=0: serial=275273 error=0 12:59:32 Received message from Master: op=Filter serial=275274 12:59:32 Color wheel filter change from 0 to 0 12:59:32 FLIGetFilterPos err=0 currentPosition=0 12:59:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:32 Filter is already there-color wheel unchanged 12:59:32 Received message from Master: op=Shutter serial=275275 12:59:32 Shutter LASER open 12:59:32 Received message from Camera: op=State serial=275277 12:59:32 GetSingleValue result=40 Value=cccccccc 12:59:32 SkyScan query 12:59:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:59:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:33 Parameters OK 12:59:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:33 Set A/D data flow result=40 12:59:33 Set A/D channel type result=40 12:59:33 Set A/D encoding result=40 12:59:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:33 Set channel filter=0.000000e+000 result=40 12:59:33 Config A/D Result=40 12:59:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:33 Get A/D filter: -9.255963e+061 result=40 12:59:33 Get A/D value=-858993460 result=40 12:59:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:33 Parameters OK 12:59:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:33 Set A/D data flow result=40 12:59:33 Set A/D channel type result=40 12:59:33 Set A/D encoding result=40 12:59:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:33 Set channel filter=0.000000e+000 result=40 12:59:33 Config A/D Result=40 12:59:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:33 Get A/D filter: -9.255963e+061 result=40 12:59:33 Get A/D value=-858993460 result=40 12:59:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:33 Aux= 12:59:33 Message to Camera, serial 275277 queued 12:59:41 Received message from Master: op=Shutter serial=275287 12:59:41 Shutter LASER close 12:59:42 Received message from Master: op=PointingHead serial=275291 12:59:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:59:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:59:42 Point started: ret=0 12:59:42 point_skyscan result=0 12:59:43 Check angles 12:59:43 SkyScan query 12:59:44 SkyScan query done: ret=0 az=89.835<-5989 ze=157.095<-1527 Statuses=0009 0009 12:59:44 Msec=0 True Az=89.835 Ze=157.095 Az status=0009 Ze status=0009 12:59:44 Check angles 12:59:44 SkyScan query 12:59:44 SkyScan query done: ret=0 az=72.315<-4821 ze=136.095<-2927 Statuses=0009 0009 12:59:44 Msec=750 True Az=72.315 Ze=136.095 Az status=0009 Ze status=0009 12:59:45 Check angles 12:59:45 SkyScan query 12:59:45 SkyScan query done: ret=0 az=54.84<-3656 ze=115.17<-4322 Statuses=0009 0009 12:59:45 Msec=1500 True Az=54.84 Ze=115.17 Az status=0009 Ze status=0009 12:59:45 Check angles 12:59:45 SkyScan query 12:59:46 SkyScan query done: ret=0 az=40.98<-2732 ze=94.14<-5724 Statuses=0009 0009 12:59:46 Msec=2250 True Az=40.98 Ze=94.14 Az status=0009 Ze status=0009 12:59:46 Check angles 12:59:46 SkyScan query 12:59:47 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 12:59:47 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 12:59:47 Check angles 12:59:47 SkyScan query 12:59:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 12:59:47 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 12:59:48 Check angles 12:59:48 SkyScan query 12:59:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:59:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:59:48 Message to Master queued w/err=0: serial=275291 error=0 12:59:53 Received message from Master: op=Filter serial=275292 12:59:53 Color wheel filter change from 0 to 0 12:59:53 FLIGetFilterPos err=0 currentPosition=0 12:59:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:53 Filter is already there-color wheel unchanged 12:59:53 Received message from Master: op=Shutter serial=275293 12:59:53 Shutter LASER close 12:59:53 Received message from Camera: op=State serial=275295 12:59:53 GetSingleValue result=40 Value=cccccccc 12:59:53 SkyScan query 12:59:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:59:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:54 Parameters OK 12:59:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:54 Set A/D data flow result=40 12:59:54 Set A/D channel type result=40 12:59:54 Set A/D encoding result=40 12:59:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:54 Set channel filter=0.000000e+000 result=40 12:59:54 Config A/D Result=40 12:59:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:54 Get A/D filter: -9.255963e+061 result=40 12:59:54 Get A/D value=-858993460 result=40 12:59:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:54 Parameters OK 12:59:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:54 Set A/D data flow result=40 12:59:54 Set A/D channel type result=40 12:59:54 Set A/D encoding result=40 12:59:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:54 Set channel filter=0.000000e+000 result=40 12:59:54 Config A/D Result=40 12:59:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:54 Get A/D filter: -9.255963e+061 result=40 12:59:54 Get A/D value=-858993460 result=40 12:59:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:54 Aux= 12:59:54 Message to Camera, serial 275295 queued 13:00:31 Received message from Master: op=PointingHead serial=275308 13:00:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:00:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:00:31 Point started: ret=0 13:00:31 point_skyscan result=0 13:00:32 Check angles 13:00:32 SkyScan query 13:00:33 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 13:00:33 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 13:00:33 Check angles 13:00:33 SkyScan query 13:00:33 SkyScan query done: ret=0 az=81.375<-5425 ze=66.495<-7567 Statuses=0009 0008 13:00:33 Msec=750 True Az=81.375 Ze=66.495 Az status=0009 Ze status=0008 13:00:33 Check angles 13:00:33 SkyScan query 13:00:34 SkyScan query done: ret=0 az=98.805<-6587 ze=66.495<-7567 Statuses=0009 0008 13:00:34 Msec=1500 True Az=98.805 Ze=66.495 Az status=0009 Ze status=0008 13:00:34 Check angles 13:00:34 SkyScan query 13:00:35 SkyScan query done: ret=0 az=116.595<-7773 ze=66.495<-7567 Statuses=0009 0008 13:00:35 Msec=2250 True Az=116.595 Ze=66.495 Az status=0009 Ze status=0008 13:00:35 Check angles 13:00:35 SkyScan query 13:00:36 SkyScan query done: ret=0 az=134.415<-8961 ze=66.495<-7567 Statuses=0009 0008 13:00:36 Msec=3000 True Az=134.415 Ze=66.495 Az status=0009 Ze status=0008 13:00:36 Check angles 13:00:36 SkyScan query 13:00:36 SkyScan query done: ret=0 az=151.89<-10126 ze=66.495<-7567 Statuses=0009 0008 13:00:36 Msec=3750 True Az=151.89 Ze=66.495 Az status=0009 Ze status=0008 13:00:36 Check angles 13:00:36 SkyScan query 13:00:37 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:00:37 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:00:37 Message to Master queued w/err=0: serial=275308 error=0 13:00:42 Received message from Master: op=Filter serial=275309 13:00:42 Color wheel filter change from 0 to 0 13:00:42 FLIGetFilterPos err=0 currentPosition=0 13:00:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:42 Filter is already there-color wheel unchanged 13:00:42 Received message from Master: op=Shutter serial=275310 13:00:42 Shutter LASER close 13:00:42 Received message from Camera: op=State serial=275312 13:00:42 GetSingleValue result=40 Value=cccccccc 13:00:42 SkyScan query 13:00:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:00:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:43 Parameters OK 13:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:43 Set A/D data flow result=40 13:00:43 Set A/D channel type result=40 13:00:43 Set A/D encoding result=40 13:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:43 Set channel filter=0.000000e+000 result=40 13:00:43 Config A/D Result=40 13:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:43 Get A/D filter: -9.255963e+061 result=40 13:00:43 Get A/D value=-858993460 result=40 13:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:43 Parameters OK 13:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:43 Set A/D data flow result=40 13:00:43 Set A/D channel type result=40 13:00:43 Set A/D encoding result=40 13:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:43 Set channel filter=0.000000e+000 result=40 13:00:43 Config A/D Result=40 13:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:43 Get A/D filter: -9.255963e+061 result=40 13:00:43 Get A/D value=-858993460 result=40 13:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:43 Aux= 13:00:43 Message to Camera, serial 275312 queued 13:01:20 Received message from Master: op=PointingHead serial=275325 13:01:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:01:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:01:20 Point started: ret=0 13:01:20 point_skyscan result=0 13:01:21 Check angles 13:01:21 SkyScan query 13:01:21 SkyScan query done: ret=0 az=134.955<-8997 ze=36.735<-9551 Statuses=0009 0009 13:01:21 Msec=0 True Az=134.955 Ze=36.735 Az status=0009 Ze status=0009 13:01:22 Check angles 13:01:22 SkyScan query 13:01:22 SkyScan query done: ret=0 az=117.495<-7833 ze=15.87<-10942 Statuses=0009 0009 13:01:22 Msec=750 True Az=117.495 Ze=15.87 Az status=0009 Ze status=0009 13:01:22 Check angles 13:01:22 SkyScan query 13:01:23 SkyScan query done: ret=0 az=100.11<-6674 ze=-5.115<-12341 Statuses=0009 0009 13:01:23 Msec=1500 True Az=100.11 Ze=-5.115 Az status=0009 Ze status=0009 13:01:23 Check angles 13:01:23 SkyScan query 13:01:24 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.52<-13768 Statuses=0009 0009 13:01:24 Msec=2250 True Az=82.26 Ze=-26.52 Az status=0009 Ze status=0009 13:01:24 Check angles 13:01:24 SkyScan query 13:01:24 SkyScan query done: ret=0 az=64.71<-4314 ze=-38.565<-14571 Statuses=0009 0008 13:01:24 Msec=3000 True Az=64.71 Ze=-38.565 Az status=0009 Ze status=0008 13:01:25 Check angles 13:01:25 SkyScan query 13:01:25 SkyScan query done: ret=0 az=47.22<-3148 ze=-38.535<-14569 Statuses=0009 0008 13:01:25 Msec=3750 True Az=47.22 Ze=-38.535 Az status=0009 Ze status=0008 13:01:25 Check angles 13:01:25 SkyScan query 13:01:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:01:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:01:26 Message to Master queued w/err=0: serial=275325 error=0 13:01:31 Received message from Master: op=Filter serial=275326 13:01:31 Color wheel filter change from 0 to 0 13:01:31 FLIGetFilterPos err=0 currentPosition=0 13:01:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:31 Filter is already there-color wheel unchanged 13:01:31 Received message from Master: op=Shutter serial=275327 13:01:31 Shutter LASER close 13:01:31 Received message from Camera: op=State serial=275329 13:01:31 GetSingleValue result=40 Value=cccccccc 13:01:31 SkyScan query 13:01:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:01:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:32 Parameters OK 13:01:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:32 Set A/D data flow result=40 13:01:32 Set A/D channel type result=40 13:01:32 Set A/D encoding result=40 13:01:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:32 Set channel filter=0.000000e+000 result=40 13:01:32 Config A/D Result=40 13:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:32 Get A/D filter: -9.255963e+061 result=40 13:01:32 Get A/D value=-858993460 result=40 13:01:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:32 Parameters OK 13:01:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:32 Set A/D data flow result=40 13:01:32 Set A/D channel type result=40 13:01:32 Set A/D encoding result=40 13:01:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:32 Set channel filter=0.000000e+000 result=40 13:01:32 Config A/D Result=40 13:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:32 Get A/D filter: -9.255963e+061 result=40 13:01:32 Get A/D value=-858993460 result=40 13:01:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:32 Aux= 13:01:32 Message to Camera, serial 275329 queued 13:02:09 Received message from Master: op=PointingHead serial=275342 13:02:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:02:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:02:09 Point started: ret=0 13:02:09 point_skyscan result=0 13:02:10 Check angles 13:02:10 SkyScan query 13:02:10 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.205<-16547 Statuses=0009 0009 13:02:10 Msec=0 True Az=63.99 Ze=-68.205 Az status=0009 Ze status=0009 13:02:10 Check angles 13:02:10 SkyScan query 13:02:11 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.64<-17976 Statuses=0009 0009 13:02:11 Msec=750 True Az=81.825 Ze=-89.64 Az status=0009 Ze status=0009 13:02:11 Check angles 13:02:11 SkyScan query 13:02:12 SkyScan query done: ret=0 az=99.675<-6645 ze=-111<-19400 Statuses=0009 0009 13:02:12 Msec=1500 True Az=99.675 Ze=-111 Az status=0009 Ze status=0009 13:02:12 Check angles 13:02:12 SkyScan query 13:02:13 SkyScan query done: ret=0 az=117.18<-7812 ze=-131.91<-20794 Statuses=0009 0009 13:02:13 Msec=2250 True Az=117.18 Ze=-131.91 Az status=0009 Ze status=0009 13:02:13 Check angles 13:02:13 SkyScan query 13:02:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 13:02:13 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 13:02:13 Check angles 13:02:13 SkyScan query 13:02:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:02:14 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:02:14 Message to Master queued w/err=0: serial=275342 error=0 13:02:19 Received message from Master: op=Filter serial=275343 13:02:19 Color wheel filter change from 0 to 0 13:02:19 FLIGetFilterPos err=0 currentPosition=0 13:02:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:19 Filter is already there-color wheel unchanged 13:02:19 Received message from Master: op=Shutter serial=275344 13:02:19 Shutter LASER close 13:02:19 Received message from Camera: op=State serial=275346 13:02:19 GetSingleValue result=40 Value=cccccccc 13:02:19 SkyScan query 13:02:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:02:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:20 Parameters OK 13:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:20 Set A/D data flow result=40 13:02:20 Set A/D channel type result=40 13:02:20 Set A/D encoding result=40 13:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:20 Set channel filter=0.000000e+000 result=40 13:02:20 Config A/D Result=40 13:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:20 Get A/D filter: -9.255963e+061 result=40 13:02:20 Get A/D value=-858993460 result=40 13:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:20 Parameters OK 13:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:20 Set A/D data flow result=40 13:02:20 Set A/D channel type result=40 13:02:20 Set A/D encoding result=40 13:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:20 Set channel filter=0.000000e+000 result=40 13:02:20 Config A/D Result=40 13:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:20 Get A/D filter: -9.255963e+061 result=40 13:02:20 Get A/D value=-858993460 result=40 13:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:20 Aux= 13:02:20 Message to Camera, serial 275346 queued 13:02:57 Received message from Master: op=PointingHead serial=275359 13:02:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:02:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:02:57 Point started: ret=0 13:02:57 point_skyscan result=0 13:02:58 Check angles 13:02:58 SkyScan query 13:02:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 13:02:58 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 13:02:59 Check angles 13:02:59 SkyScan query 13:02:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:02:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:02:59 Message to Master queued w/err=0: serial=275359 error=0 13:03:04 Received message from Master: op=Filter serial=275360 13:03:04 Color wheel filter change from 0 to 0 13:03:04 FLIGetFilterPos err=0 currentPosition=0 13:03:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:04 Filter is already there-color wheel unchanged 13:03:04 Received message from Master: op=Shutter serial=275361 13:03:04 Shutter LASER open 13:03:04 Received message from Camera: op=State serial=275363 13:03:04 GetSingleValue result=40 Value=cccccccc 13:03:04 SkyScan query 13:03:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:03:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:05 Parameters OK 13:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:05 Set A/D data flow result=40 13:03:05 Set A/D channel type result=40 13:03:05 Set A/D encoding result=40 13:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:05 Set channel filter=0.000000e+000 result=40 13:03:05 Config A/D Result=40 13:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:05 Get A/D filter: -9.255963e+061 result=40 13:03:05 Get A/D value=-858993460 result=40 13:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:05 Parameters OK 13:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:05 Set A/D data flow result=40 13:03:05 Set A/D channel type result=40 13:03:05 Set A/D encoding result=40 13:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:05 Set channel filter=0.000000e+000 result=40 13:03:05 Config A/D Result=40 13:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:05 Get A/D filter: -9.255963e+061 result=40 13:03:05 Get A/D value=-858993460 result=40 13:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:05 Aux= 13:03:05 Message to Camera, serial 275363 queued 13:03:13 Received message from Master: op=Shutter serial=275373 13:03:14 Shutter LASER close 13:03:14 Received message from Master: op=PointingHead serial=275377 13:03:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:03:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:03:14 Point started: ret=0 13:03:14 point_skyscan result=0 13:03:15 Check angles 13:03:15 SkyScan query 13:03:16 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.28<-21552 Statuses=0009 0009 13:03:16 Msec=0 True Az=135.96 Ze=-143.28 Az status=0009 Ze status=0009 13:03:16 Check angles 13:03:16 SkyScan query 13:03:16 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.25<-20150 Statuses=0009 0009 13:03:16 Msec=750 True Az=153.435 Ze=-122.25 Az status=0009 Ze status=0009 13:03:17 Check angles 13:03:17 SkyScan query 13:03:17 SkyScan query done: ret=0 az=171.345<-11423 ze=-100.86<-18724 Statuses=0009 0009 13:03:17 Msec=1500 True Az=171.345 Ze=-100.86 Az status=0009 Ze status=0009 13:03:17 Check angles 13:03:17 SkyScan query 13:03:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.98<-17332 Statuses=0008 0009 13:03:18 Msec=2250 True Az=176.01 Ze=-79.98 Az status=0008 Ze status=0009 13:03:18 Check angles 13:03:18 SkyScan query 13:03:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.98<-15932 Statuses=0008 0009 13:03:19 Msec=3000 True Az=175.995 Ze=-58.98 Az status=0008 Ze status=0009 13:03:19 Check angles 13:03:19 SkyScan query 13:03:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 13:03:20 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 13:03:20 Message to Master queued w/err=0: serial=275377 error=0 13:03:25 Received message from Master: op=Filter serial=275378 13:03:25 Color wheel filter change from 0 to 0 13:03:25 FLIGetFilterPos err=0 currentPosition=0 13:03:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:25 Filter is already there-color wheel unchanged 13:03:25 Received message from Master: op=Shutter serial=275379 13:03:25 Shutter LASER close 13:03:25 Received message from Camera: op=State serial=275381 13:03:25 GetSingleValue result=40 Value=cccccccc 13:03:25 SkyScan query 13:03:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:03:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:25 Parameters OK 13:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:25 Set A/D data flow result=40 13:03:25 Set A/D channel type result=40 13:03:25 Set A/D encoding result=40 13:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:25 Set channel filter=0.000000e+000 result=40 13:03:25 Config A/D Result=40 13:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:25 Get A/D filter: -9.255963e+061 result=40 13:03:25 Get A/D value=-858993460 result=40 13:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:25 Parameters OK 13:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:25 Set A/D data flow result=40 13:03:25 Set A/D channel type result=40 13:03:25 Set A/D encoding result=40 13:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:25 Set channel filter=0.000000e+000 result=40 13:03:25 Config A/D Result=40 13:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:25 Get A/D filter: -9.255963e+061 result=40 13:03:25 Get A/D value=-858993460 result=40 13:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:25 Aux= 13:03:25 Message to Camera, serial 275381 queued 13:04:02 Received message from Master: op=PointingHead serial=275394 13:04:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:04:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:04:03 Point started: ret=0 13:04:03 point_skyscan result=0 13:04:03 Check angles 13:04:03 SkyScan query 13:04:04 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.315<-13421 Statuses=0009 0009 13:04:04 Msec=0 True Az=152.73 Ze=-21.315 Az status=0009 Ze status=0009 13:04:04 Check angles 13:04:04 SkyScan query 13:04:05 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.36<-12024 Statuses=0009 0009 13:04:05 Msec=750 True Az=135.15 Ze=-0.36 Az status=0009 Ze status=0009 13:04:05 Check angles 13:04:05 SkyScan query 13:04:05 SkyScan query done: ret=0 az=117.585<-7839 ze=20.61<-10626 Statuses=0009 0009 13:04:05 Msec=1500 True Az=117.585 Ze=20.61 Az status=0009 Ze status=0009 13:04:06 Check angles 13:04:06 SkyScan query 13:04:06 SkyScan query done: ret=0 az=100.35<-6690 ze=41.55<-9230 Statuses=0009 0009 13:04:06 Msec=2250 True Az=100.35 Ze=41.55 Az status=0009 Ze status=0009 13:04:06 Check angles 13:04:06 SkyScan query 13:04:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.585<-8561 Statuses=0009 0008 13:04:07 Msec=3000 True Az=85.995 Ze=51.585 Az status=0009 Ze status=0008 13:04:07 Check angles 13:04:07 SkyScan query 13:04:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:04:08 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 13:04:08 Message to Master queued w/err=0: serial=275394 error=0 13:04:13 Received message from Master: op=Filter serial=275395 13:04:13 Color wheel filter change from 0 to 0 13:04:13 FLIGetFilterPos err=0 currentPosition=0 13:04:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:13 Filter is already there-color wheel unchanged 13:04:13 Received message from Master: op=Shutter serial=275396 13:04:13 Shutter LASER close 13:04:13 Received message from Camera: op=State serial=275398 13:04:13 GetSingleValue result=40 Value=cccccccc 13:04:13 SkyScan query 13:04:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:04:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:13 Parameters OK 13:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:13 Set A/D data flow result=40 13:04:13 Set A/D channel type result=40 13:04:13 Set A/D encoding result=40 13:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:13 Set channel filter=0.000000e+000 result=40 13:04:13 Config A/D Result=40 13:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:13 Get A/D filter: -9.255963e+061 result=40 13:04:13 Get A/D value=-858993460 result=40 13:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:13 Parameters OK 13:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:13 Set A/D data flow result=40 13:04:13 Set A/D channel type result=40 13:04:13 Set A/D encoding result=40 13:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:13 Set channel filter=0.000000e+000 result=40 13:04:13 Config A/D Result=40 13:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:13 Get A/D filter: -9.255963e+061 result=40 13:04:13 Get A/D value=-858993460 result=40 13:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:13 Aux= 13:04:13 Message to Camera, serial 275398 queued 13:04:50 Received message from Master: op=PointingHead serial=275411 13:04:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:04:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:04:51 Point started: ret=0 13:04:51 point_skyscan result=0 13:04:51 Check angles 13:04:51 SkyScan query 13:04:52 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 13:04:52 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 13:04:52 Check angles 13:04:52 SkyScan query 13:04:53 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 13:04:53 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 13:04:53 Check angles 13:04:53 SkyScan query 13:04:53 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 13:04:53 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 13:04:54 Check angles 13:04:54 SkyScan query 13:04:54 SkyScan query done: ret=0 az=162.15<-10810 ze=38.505<-9433 Statuses=0009 0008 13:04:54 Msec=2250 True Az=162.15 Ze=38.505 Az status=0009 Ze status=0008 13:04:54 Check angles 13:04:54 SkyScan query 13:04:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:04:55 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:04:55 Check angles 13:04:55 SkyScan query 13:04:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:04:56 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:04:56 Message to Master queued w/err=0: serial=275411 error=0 13:05:01 Received message from Master: op=Filter serial=275412 13:05:01 Color wheel filter change from 0 to 0 13:05:01 FLIGetFilterPos err=0 currentPosition=0 13:05:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:01 Filter is already there-color wheel unchanged 13:05:01 Received message from Master: op=Shutter serial=275413 13:05:01 Shutter LASER close 13:05:01 Received message from Camera: op=State serial=275415 13:05:01 GetSingleValue result=40 Value=cccccccc 13:05:01 SkyScan query 13:05:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:05:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:02 Parameters OK 13:05:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:02 Set A/D data flow result=40 13:05:02 Set A/D channel type result=40 13:05:02 Set A/D encoding result=40 13:05:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:02 Set channel filter=0.000000e+000 result=40 13:05:02 Config A/D Result=40 13:05:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:02 Get A/D filter: -9.255963e+061 result=40 13:05:02 Get A/D value=-858993460 result=40 13:05:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:02 Parameters OK 13:05:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:02 Set A/D data flow result=40 13:05:02 Set A/D channel type result=40 13:05:02 Set A/D encoding result=40 13:05:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:02 Set channel filter=0.000000e+000 result=40 13:05:02 Config A/D Result=40 13:05:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:02 Get A/D filter: -9.255963e+061 result=40 13:05:02 Get A/D value=-858993460 result=40 13:05:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:02 Aux= 13:05:02 Message to Camera, serial 275415 queued 13:05:39 Received message from Master: op=PointingHead serial=275428 13:05:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:05:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:05:39 Point started: ret=0 13:05:39 point_skyscan result=0 13:05:40 Check angles 13:05:40 SkyScan query 13:05:40 SkyScan query done: ret=0 az=153.105<-10207 ze=68.265<-7449 Statuses=0009 0009 13:05:40 Msec=0 True Az=153.105 Ze=68.265 Az status=0009 Ze status=0009 13:05:40 Check angles 13:05:40 SkyScan query 13:05:41 SkyScan query done: ret=0 az=135.255<-9017 ze=89.7<-6020 Statuses=0009 0009 13:05:41 Msec=750 True Az=135.255 Ze=89.7 Az status=0009 Ze status=0009 13:05:41 Check angles 13:05:41 SkyScan query 13:05:42 SkyScan query done: ret=0 az=117.405<-7827 ze=111<-4600 Statuses=0009 0009 13:05:42 Msec=1500 True Az=117.405 Ze=111 Az status=0009 Ze status=0009 13:05:42 Check angles 13:05:42 SkyScan query 13:05:42 SkyScan query done: ret=0 az=112.995<-7533 ze=131.985<-3201 Statuses=0008 0009 13:05:42 Msec=2250 True Az=112.995 Ze=131.985 Az status=0008 Ze status=0009 13:05:43 Check angles 13:05:43 SkyScan query 13:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=152.955<-1803 Statuses=0008 0009 [UTC 2018-12-19 13:05:43] 13:05:43 Msec=3000 True Az=112.995 Ze=152.955 Az status=0008 Ze status=0009 13:05:43 Check angles 13:05:43 SkyScan query 13:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=173.895<-407 Statuses=0008 0009 13:05:44 Msec=3750 True Az=112.995 Ze=173.895 Az status=0008 Ze status=0009 13:05:44 Check angles 13:05:44 SkyScan query 13:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 13:05:45 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 13:05:45 Message to Master queued w/err=0: serial=275428 error=0 13:05:50 Received message from Master: op=Filter serial=275429 13:05:50 Color wheel filter change from 0 to 0 13:05:50 FLIGetFilterPos err=0 currentPosition=0 13:05:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:50 Filter is already there-color wheel unchanged 13:05:50 Received message from Master: op=Shutter serial=275430 13:05:50 Shutter LASER open 13:05:50 Received message from Camera: op=State serial=275432 13:05:50 GetSingleValue result=40 Value=cccccccc 13:05:50 SkyScan query 13:05:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:05:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:51 Parameters OK 13:05:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:51 Set A/D data flow result=40 13:05:51 Set A/D channel type result=40 13:05:51 Set A/D encoding result=40 13:05:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:51 Set channel filter=0.000000e+000 result=40 13:05:51 Config A/D Result=40 13:05:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:51 Get A/D filter: -9.255963e+061 result=40 13:05:51 Get A/D value=-858993460 result=40 13:05:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:51 Parameters OK 13:05:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:51 Set A/D data flow result=40 13:05:51 Set A/D channel type result=40 13:05:51 Set A/D encoding result=40 13:05:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:51 Set channel filter=0.000000e+000 result=40 13:05:51 Config A/D Result=40 13:05:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:51 Get A/D filter: -9.255963e+061 result=40 13:05:51 Get A/D value=-858993460 result=40 13:05:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:51 Aux= 13:05:51 Message to Camera, serial 275432 queued 13:05:59 Received message from Master: op=Shutter serial=275442 13:05:59 Shutter LASER close 13:06:00 Received message from Master: op=PointingHead serial=275446 13:06:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:06:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:06:00 Point started: ret=0 13:06:00 point_skyscan result=0 13:06:01 Check angles 13:06:01 SkyScan query 13:06:01 SkyScan query done: ret=0 az=90.105<-6007 ze=157.575<-1495 Statuses=0009 0009 13:06:01 Msec=0 True Az=90.105 Ze=157.575 Az status=0009 Ze status=0009 13:06:01 Check angles 13:06:01 SkyScan query 13:06:02 SkyScan query done: ret=0 az=72.285<-4819 ze=136.14<-2924 Statuses=0009 0009 13:06:02 Msec=750 True Az=72.285 Ze=136.14 Az status=0009 Ze status=0009 13:06:02 Check angles 13:06:02 SkyScan query 13:06:03 SkyScan query done: ret=0 az=54.42<-3628 ze=114.72<-4352 Statuses=0009 0009 13:06:03 Msec=1500 True Az=54.42 Ze=114.72 Az status=0009 Ze status=0009 13:06:03 Check angles 13:06:03 SkyScan query 13:06:04 SkyScan query done: ret=0 az=40.98<-2732 ze=93.81<-5746 Statuses=0009 0009 13:06:04 Msec=2250 True Az=40.98 Ze=93.81 Az status=0009 Ze status=0009 13:06:04 Check angles 13:06:04 SkyScan query 13:06:04 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 13:06:04 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 13:06:04 Check angles 13:06:04 SkyScan query 13:06:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 13:06:05 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 13:06:05 Check angles 13:06:05 SkyScan query 13:06:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:06:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:06:06 Message to Master queued w/err=0: serial=275446 error=0 13:06:11 Received message from Master: op=Filter serial=275447 13:06:11 Color wheel filter change from 0 to 0 13:06:11 FLIGetFilterPos err=0 currentPosition=0 13:06:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:11 Filter is already there-color wheel unchanged 13:06:11 Received message from Master: op=Shutter serial=275448 13:06:11 Shutter LASER close 13:06:11 Received message from Camera: op=State serial=275450 13:06:11 GetSingleValue result=40 Value=cccccccc 13:06:11 SkyScan query 13:06:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:06:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:12 Parameters OK 13:06:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:12 Set A/D data flow result=40 13:06:12 Set A/D channel type result=40 13:06:12 Set A/D encoding result=40 13:06:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:12 Set channel filter=0.000000e+000 result=40 13:06:12 Config A/D Result=40 13:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:12 Get A/D filter: -9.255963e+061 result=40 13:06:12 Get A/D value=-858993460 result=40 13:06:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:12 Parameters OK 13:06:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:12 Set A/D data flow result=40 13:06:12 Set A/D channel type result=40 13:06:12 Set A/D encoding result=40 13:06:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:12 Set channel filter=0.000000e+000 result=40 13:06:12 Config A/D Result=40 13:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:12 Get A/D filter: -9.255963e+061 result=40 13:06:12 Get A/D value=-858993460 result=40 13:06:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:12 Aux= 13:06:12 Message to Camera, serial 275450 queued 13:06:49 Received message from Master: op=PointingHead serial=275463 13:06:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:06:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:06:49 Point started: ret=0 13:06:49 point_skyscan result=0 13:06:50 Check angles 13:06:50 SkyScan query 13:06:50 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 13:06:50 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 13:06:50 Check angles 13:06:50 SkyScan query 13:06:51 SkyScan query done: ret=0 az=81.33<-5422 ze=66.495<-7567 Statuses=0009 0008 13:06:51 Msec=750 True Az=81.33 Ze=66.495 Az status=0009 Ze status=0008 13:06:51 Check angles 13:06:51 SkyScan query 13:06:52 SkyScan query done: ret=0 az=99.33<-6622 ze=66.495<-7567 Statuses=0009 0008 13:06:52 Msec=1500 True Az=99.33 Ze=66.495 Az status=0009 Ze status=0008 13:06:52 Check angles 13:06:52 SkyScan query 13:06:52 SkyScan query done: ret=0 az=116.745<-7783 ze=66.495<-7567 Statuses=0009 0008 13:06:52 Msec=2250 True Az=116.745 Ze=66.495 Az status=0009 Ze status=0008 13:06:53 Check angles 13:06:53 SkyScan query 13:06:53 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 13:06:53 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 13:06:53 Check angles 13:06:53 SkyScan query 13:06:54 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 13:06:54 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 13:06:54 Check angles 13:06:54 SkyScan query 13:06:55 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:06:55 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:06:55 Message to Master queued w/err=0: serial=275463 error=0 13:07:00 Received message from Master: op=Filter serial=275464 13:07:00 Color wheel filter change from 0 to 0 13:07:00 FLIGetFilterPos err=0 currentPosition=0 13:07:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:00 Filter is already there-color wheel unchanged 13:07:00 Received message from Master: op=Shutter serial=275465 13:07:00 Shutter LASER close 13:07:00 Received message from Camera: op=State serial=275467 13:07:00 GetSingleValue result=40 Value=cccccccc 13:07:00 SkyScan query 13:07:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:07:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:01 Parameters OK 13:07:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:01 Set A/D data flow result=40 13:07:01 Set A/D channel type result=40 13:07:01 Set A/D encoding result=40 13:07:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:01 Set channel filter=0.000000e+000 result=40 13:07:01 Config A/D Result=40 13:07:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:01 Get A/D filter: -9.255963e+061 result=40 13:07:01 Get A/D value=-858993460 result=40 13:07:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:01 Parameters OK 13:07:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:01 Set A/D data flow result=40 13:07:01 Set A/D channel type result=40 13:07:01 Set A/D encoding result=40 13:07:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:01 Set channel filter=0.000000e+000 result=40 13:07:01 Config A/D Result=40 13:07:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:01 Get A/D filter: -9.255963e+061 result=40 13:07:01 Get A/D value=-858993460 result=40 13:07:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:01 Aux= 13:07:01 Message to Camera, serial 275467 queued 13:07:37 Received message from Master: op=PointingHead serial=275480 13:07:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:07:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:07:38 Point started: ret=0 13:07:38 point_skyscan result=0 13:07:38 Check angles 13:07:38 SkyScan query 13:07:39 SkyScan query done: ret=0 az=134.58<-8972 ze=36.39<-9574 Statuses=0009 0009 13:07:39 Msec=0 True Az=134.58 Ze=36.39 Az status=0009 Ze status=0009 13:07:39 Check angles 13:07:39 SkyScan query 13:07:40 SkyScan query done: ret=0 az=117.12<-7808 ze=15.465<-10969 Statuses=0009 0009 13:07:40 Msec=750 True Az=117.12 Ze=15.465 Az status=0009 Ze status=0009 13:07:40 Check angles 13:07:40 SkyScan query 13:07:41 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.535<-12369 Statuses=0009 0009 13:07:41 Msec=1500 True Az=99.81 Ze=-5.535 Az status=0009 Ze status=0009 13:07:41 Check angles 13:07:41 SkyScan query 13:07:41 SkyScan query done: ret=0 az=82.185<-5479 ze=-26.535<-13769 Statuses=0009 0009 13:07:41 Msec=2250 True Az=82.185 Ze=-26.535 Az status=0009 Ze status=0009 13:07:41 Check angles 13:07:41 SkyScan query 13:07:42 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.565<-14571 Statuses=0009 0008 13:07:42 Msec=3000 True Az=64.695 Ze=-38.565 Az status=0009 Ze status=0008 13:07:42 Check angles 13:07:42 SkyScan query 13:07:43 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.535<-14569 Statuses=0009 0008 13:07:43 Msec=3750 True Az=47.355 Ze=-38.535 Az status=0009 Ze status=0008 13:07:43 Check angles 13:07:43 SkyScan query 13:07:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:07:44 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:07:44 Message to Master queued w/err=0: serial=275480 error=0 13:07:49 Received message from Master: op=Filter serial=275481 13:07:49 Color wheel filter change from 0 to 0 13:07:49 FLIGetFilterPos err=0 currentPosition=0 13:07:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:49 Filter is already there-color wheel unchanged 13:07:49 Received message from Master: op=Shutter serial=275482 13:07:49 Shutter LASER close 13:07:49 Received message from Camera: op=State serial=275484 13:07:49 GetSingleValue result=40 Value=cccccccc 13:07:49 SkyScan query 13:07:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:07:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:49 Parameters OK 13:07:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:49 Set A/D data flow result=40 13:07:49 Set A/D channel type result=40 13:07:49 Set A/D encoding result=40 13:07:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:49 Set channel filter=0.000000e+000 result=40 13:07:49 Config A/D Result=40 13:07:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:49 Get A/D filter: -9.255963e+061 result=40 13:07:49 Get A/D value=-858993460 result=40 13:07:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:49 Parameters OK 13:07:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:49 Set A/D data flow result=40 13:07:49 Set A/D channel type result=40 13:07:49 Set A/D encoding result=40 13:07:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:49 Set channel filter=0.000000e+000 result=40 13:07:49 Config A/D Result=40 13:07:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:49 Get A/D filter: -9.255963e+061 result=40 13:07:49 Get A/D value=-858993460 result=40 13:07:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:49 Aux= 13:07:49 Message to Camera, serial 275484 queued 13:08:26 Received message from Master: op=PointingHead serial=275497 13:08:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:08:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:08:27 Point started: ret=0 13:08:27 point_skyscan result=0 13:08:27 Check angles 13:08:27 SkyScan query 13:08:28 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.25<-16550 Statuses=0009 0009 13:08:28 Msec=0 True Az=63.945 Ze=-68.25 Az status=0009 Ze status=0009 13:08:28 Check angles 13:08:28 SkyScan query 13:08:29 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.655<-17977 Statuses=0009 0009 13:08:29 Msec=750 True Az=81.795 Ze=-89.655 Az status=0009 Ze status=0009 13:08:29 Check angles 13:08:29 SkyScan query 13:08:29 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.655<-19377 Statuses=0009 0009 13:08:29 Msec=1500 True Az=99.36 Ze=-110.655 Az status=0009 Ze status=0009 13:08:30 Check angles 13:08:30 SkyScan query 13:08:30 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.52<-20768 Statuses=0009 0009 13:08:30 Msec=2250 True Az=116.73 Ze=-131.52 Az status=0009 Ze status=0009 13:08:30 Check angles 13:08:30 SkyScan query 13:08:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 13:08:31 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 13:08:31 Check angles 13:08:31 SkyScan query 13:08:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:08:32 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:08:32 Message to Master queued w/err=0: serial=275497 error=0 13:08:37 Received message from Master: op=Filter serial=275498 13:08:37 Color wheel filter change from 0 to 0 13:08:37 FLIGetFilterPos err=0 currentPosition=0 13:08:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:37 Filter is already there-color wheel unchanged 13:08:37 Received message from Master: op=Shutter serial=275499 13:08:37 Shutter LASER close 13:08:37 Received message from Camera: op=State serial=275501 13:08:37 GetSingleValue result=40 Value=cccccccc 13:08:37 SkyScan query 13:08:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:08:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:37 Parameters OK 13:08:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:37 Set A/D data flow result=40 13:08:37 Set A/D channel type result=40 13:08:37 Set A/D encoding result=40 13:08:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:37 Set channel filter=0.000000e+000 result=40 13:08:37 Config A/D Result=40 13:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:37 Get A/D filter: -9.255963e+061 result=40 13:08:37 Get A/D value=-858993460 result=40 13:08:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:37 Parameters OK 13:08:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:37 Set A/D data flow result=40 13:08:37 Set A/D channel type result=40 13:08:37 Set A/D encoding result=40 13:08:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:37 Set channel filter=0.000000e+000 result=40 13:08:37 Config A/D Result=40 13:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:37 Get A/D filter: -9.255963e+061 result=40 13:08:37 Get A/D value=-858993460 result=40 13:08:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:37 Aux= 13:08:37 Message to Camera, serial 275501 queued 13:09:14 Received message from Master: op=PointingHead serial=275514 13:09:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:09:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:09:15 Point started: ret=0 13:09:15 point_skyscan result=0 13:09:15 Check angles 13:09:15 SkyScan query 13:09:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 13:09:16 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 13:09:16 Check angles 13:09:16 SkyScan query 13:09:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:09:17 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:09:17 Message to Master queued w/err=0: serial=275514 error=0 13:09:22 Received message from Master: op=Filter serial=275515 13:09:22 Color wheel filter change from 0 to 0 13:09:22 FLIGetFilterPos err=0 currentPosition=0 13:09:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:22 Filter is already there-color wheel unchanged 13:09:22 Received message from Master: op=Shutter serial=275516 13:09:22 Shutter LASER open 13:09:22 Received message from Camera: op=State serial=275518 13:09:22 GetSingleValue result=40 Value=cccccccc 13:09:22 SkyScan query 13:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:09:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:23 Parameters OK 13:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:23 Set A/D data flow result=40 13:09:23 Set A/D channel type result=40 13:09:23 Set A/D encoding result=40 13:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:23 Set channel filter=0.000000e+000 result=40 13:09:23 Config A/D Result=40 13:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:23 Get A/D filter: -9.255963e+061 result=40 13:09:23 Get A/D value=-858993460 result=40 13:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:23 Parameters OK 13:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:23 Set A/D data flow result=40 13:09:23 Set A/D channel type result=40 13:09:23 Set A/D encoding result=40 13:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:23 Set channel filter=0.000000e+000 result=40 13:09:23 Config A/D Result=40 13:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:23 Get A/D filter: -9.255963e+061 result=40 13:09:23 Get A/D value=-858993460 result=40 13:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:23 Aux= 13:09:23 Message to Camera, serial 275518 queued 13:09:31 Received message from Master: op=Shutter serial=275528 13:09:31 Shutter LASER close 13:09:32 Received message from Master: op=PointingHead serial=275532 13:09:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:09:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:09:32 Point started: ret=0 13:09:32 point_skyscan result=0 13:09:33 Check angles 13:09:33 SkyScan query 13:09:33 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.235<-21549 Statuses=0009 0009 13:09:33 Msec=0 True Az=135.96 Ze=-143.235 Az status=0009 Ze status=0009 13:09:33 Check angles 13:09:33 SkyScan query 13:09:34 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.22<-20148 Statuses=0009 0009 13:09:34 Msec=750 True Az=153.48 Ze=-122.22 Az status=0009 Ze status=0009 13:09:34 Check angles 13:09:34 SkyScan query 13:09:35 SkyScan query done: ret=0 az=171.345<-11423 ze=-100.8<-18720 Statuses=0009 0009 13:09:35 Msec=1500 True Az=171.345 Ze=-100.8 Az status=0009 Ze status=0009 13:09:35 Check angles 13:09:35 SkyScan query 13:09:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.455<-17297 Statuses=0008 0009 13:09:36 Msec=2250 True Az=176.01 Ze=-79.455 Az status=0008 Ze status=0009 13:09:36 Check angles 13:09:36 SkyScan query 13:09:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.425<-15895 Statuses=0008 0009 13:09:36 Msec=3000 True Az=176.01 Ze=-58.425 Az status=0008 Ze status=0009 13:09:36 Check angles 13:09:36 SkyScan query 13:09:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:09:37 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:09:37 Message to Master queued w/err=0: serial=275532 error=0 13:09:42 Received message from Master: op=Filter serial=275533 13:09:42 Color wheel filter change from 0 to 0 13:09:42 FLIGetFilterPos err=0 currentPosition=0 13:09:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:42 Filter is already there-color wheel unchanged 13:09:42 Received message from Master: op=Shutter serial=275534 13:09:42 Shutter LASER close 13:09:42 Received message from Camera: op=State serial=275536 13:09:42 GetSingleValue result=40 Value=cccccccc 13:09:42 SkyScan query 13:09:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:09:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:43 Parameters OK 13:09:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:43 Set A/D data flow result=40 13:09:43 Set A/D channel type result=40 13:09:43 Set A/D encoding result=40 13:09:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:43 Set channel filter=0.000000e+000 result=40 13:09:43 Config A/D Result=40 13:09:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:43 Get A/D filter: -9.255963e+061 result=40 13:09:43 Get A/D value=-858993460 result=40 13:09:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:43 Parameters OK 13:09:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:43 Set A/D data flow result=40 13:09:43 Set A/D channel type result=40 13:09:43 Set A/D encoding result=40 13:09:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:43 Set channel filter=0.000000e+000 result=40 13:09:43 Config A/D Result=40 13:09:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:43 Get A/D filter: -9.255963e+061 result=40 13:09:43 Get A/D value=-858993460 result=40 13:09:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:43 Aux= 13:09:43 Message to Camera, serial 275536 queued 13:10:20 Received message from Master: op=PointingHead serial=275549 13:10:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:10:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:10:20 Point started: ret=0 13:10:20 point_skyscan result=0 13:10:21 Check angles 13:10:21 SkyScan query 13:10:22 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.765<-13451 Statuses=0009 0009 13:10:22 Msec=0 True Az=152.97 Ze=-21.765 Az status=0009 Ze status=0009 13:10:22 Check angles 13:10:22 SkyScan query 13:10:22 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.75<-12050 Statuses=0009 0009 13:10:22 Msec=750 True Az=135.405 Ze=-0.75 Az status=0009 Ze status=0009 13:10:22 Check angles 13:10:22 SkyScan query 13:10:23 SkyScan query done: ret=0 az=118.005<-7867 ze=20.265<-10649 Statuses=0009 0009 13:10:23 Msec=1500 True Az=118.005 Ze=20.265 Az status=0009 Ze status=0009 13:10:23 Check angles 13:10:23 SkyScan query 13:10:24 SkyScan query done: ret=0 az=100.56<-6704 ze=41.19<-9254 Statuses=0009 0009 13:10:24 Msec=2250 True Az=100.56 Ze=41.19 Az status=0009 Ze status=0009 13:10:24 Check angles 13:10:24 SkyScan query 13:10:25 SkyScan query done: ret=0 az=85.98<-5732 ze=51.585<-8561 Statuses=0009 0008 13:10:25 Msec=3000 True Az=85.98 Ze=51.585 Az status=0009 Ze status=0008 13:10:25 Check angles 13:10:25 SkyScan query 13:10:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:10:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:10:25 Message to Master queued w/err=0: serial=275549 error=0 13:10:30 Received message from Master: op=Filter serial=275550 13:10:30 Color wheel filter change from 0 to 0 13:10:30 FLIGetFilterPos err=0 currentPosition=0 13:10:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:30 Filter is already there-color wheel unchanged 13:10:30 Received message from Master: op=Shutter serial=275551 13:10:30 Shutter LASER close 13:10:30 Received message from Camera: op=State serial=275553 13:10:30 GetSingleValue result=40 Value=cccccccc 13:10:30 SkyScan query 13:10:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:10:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:31 Parameters OK 13:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:31 Set A/D data flow result=40 13:10:31 Set A/D channel type result=40 13:10:31 Set A/D encoding result=40 13:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:31 Set channel filter=0.000000e+000 result=40 13:10:31 Config A/D Result=40 13:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:31 Get A/D filter: -9.255963e+061 result=40 13:10:31 Get A/D value=-858993460 result=40 13:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:31 Parameters OK 13:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:31 Set A/D data flow result=40 13:10:31 Set A/D channel type result=40 13:10:31 Set A/D encoding result=40 13:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:31 Set channel filter=0.000000e+000 result=40 13:10:31 Config A/D Result=40 13:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:31 Get A/D filter: -9.255963e+061 result=40 13:10:31 Get A/D value=-858993460 result=40 13:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:31 Aux= 13:10:31 Message to Camera, serial 275553 queued 13:11:07 Received message from Master: op=PointingHead serial=275565 13:11:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:11:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:11:07 Point started: ret=0 13:11:07 point_skyscan result=0 13:11:08 Check angles 13:11:08 SkyScan query 13:11:09 SkyScan query done: ret=0 az=108.72<-7248 ze=38.49<-9434 Statuses=0009 0008 13:11:09 Msec=0 True Az=108.72 Ze=38.49 Az status=0009 Ze status=0008 13:11:09 Check angles 13:11:09 SkyScan query 13:11:09 SkyScan query done: ret=0 az=126.255<-8417 ze=38.49<-9434 Statuses=0009 0008 13:11:09 Msec=750 True Az=126.255 Ze=38.49 Az status=0009 Ze status=0008 13:11:10 Check angles 13:11:10 SkyScan query 13:11:10 SkyScan query done: ret=0 az=143.79<-9586 ze=38.505<-9433 Statuses=0009 0008 13:11:10 Msec=1500 True Az=143.79 Ze=38.505 Az status=0009 Ze status=0008 13:11:10 Check angles 13:11:10 SkyScan query 13:11:11 SkyScan query done: ret=0 az=161.16<-10744 ze=38.505<-9433 Statuses=0009 0008 13:11:11 Msec=2250 True Az=161.16 Ze=38.505 Az status=0009 Ze status=0008 13:11:11 Check angles 13:11:11 SkyScan query 13:11:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:11:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:11:12 Check angles 13:11:12 SkyScan query 13:11:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:11:12 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:11:12 Message to Master queued w/err=0: serial=275565 error=0 13:11:17 Received message from Master: op=Filter serial=275566 13:11:17 Color wheel filter change from 0 to 0 13:11:17 FLIGetFilterPos err=0 currentPosition=0 13:11:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:17 Filter is already there-color wheel unchanged 13:11:18 Received message from Master: op=Shutter serial=275567 13:11:18 Shutter LASER close 13:11:18 Received message from Camera: op=State serial=275569 13:11:18 GetSingleValue result=40 Value=cccccccc 13:11:18 SkyScan query 13:11:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:11:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:18 Parameters OK 13:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:18 Set A/D data flow result=40 13:11:18 Set A/D channel type result=40 13:11:18 Set A/D encoding result=40 13:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:18 Set channel filter=0.000000e+000 result=40 13:11:18 Config A/D Result=40 13:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:18 Get A/D filter: -9.255963e+061 result=40 13:11:18 Get A/D value=-858993460 result=40 13:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:18 Parameters OK 13:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:18 Set A/D data flow result=40 13:11:18 Set A/D channel type result=40 13:11:18 Set A/D encoding result=40 13:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:18 Set channel filter=0.000000e+000 result=40 13:11:18 Config A/D Result=40 13:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:18 Get A/D filter: -9.255963e+061 result=40 13:11:18 Get A/D value=-858993460 result=40 13:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:18 Aux= 13:11:18 Message to Camera, serial 275569 queued 13:11:54 Received message from Master: op=PointingHead serial=275581 13:11:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:11:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:11:54 Point started: ret=0 13:11:54 point_skyscan result=0 13:11:55 Check angles 13:11:55 SkyScan query 13:11:56 SkyScan query done: ret=0 az=153.18<-10212 ze=8.94<-11404 Statuses=0009 0009 13:11:56 Msec=0 True Az=153.18 Ze=8.94 Az status=0009 Ze status=0009 13:11:56 Check angles 13:11:56 SkyScan query 13:11:56 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.09<-12806 Statuses=0009 0009 13:11:56 Msec=750 True Az=135.66 Ze=-12.09 Az status=0009 Ze status=0009 13:11:57 Check angles 13:11:57 SkyScan query 13:11:57 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.495<-14233 Statuses=0009 0009 13:11:57 Msec=1500 True Az=117.825 Ze=-33.495 Az status=0009 Ze status=0009 13:11:57 Check angles 13:11:57 SkyScan query 13:11:58 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.555<-15437 Statuses=0009 0009 13:11:58 Msec=2250 True Az=100.44 Ze=-51.555 Az status=0009 Ze status=0009 13:11:58 Check angles 13:11:58 SkyScan query 13:11:59 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:11:59 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:11:59 Check angles 13:11:59 SkyScan query 13:12:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:12:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:12:00 Message to Master queued w/err=0: serial=275581 error=0 13:12:05 Received message from Master: op=Filter serial=275582 13:12:05 Color wheel filter change from 0 to 0 13:12:05 FLIGetFilterPos err=0 currentPosition=0 13:12:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:05 Filter is already there-color wheel unchanged 13:12:05 Received message from Master: op=Shutter serial=275583 13:12:05 Shutter LASER close 13:12:05 Received message from Camera: op=State serial=275585 13:12:05 GetSingleValue result=40 Value=cccccccc 13:12:05 SkyScan query 13:12:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:12:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:05 Parameters OK 13:12:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:05 Set A/D data flow result=40 13:12:05 Set A/D channel type result=40 13:12:05 Set A/D encoding result=40 13:12:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:05 Set channel filter=0.000000e+000 result=40 13:12:05 Config A/D Result=40 13:12:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:05 Get A/D filter: -9.255963e+061 result=40 13:12:05 Get A/D value=-858993460 result=40 13:12:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:05 Parameters OK 13:12:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:05 Set A/D data flow result=40 13:12:05 Set A/D channel type result=40 13:12:05 Set A/D encoding result=40 13:12:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:05 Set channel filter=0.000000e+000 result=40 13:12:05 Config A/D Result=40 13:12:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:05 Get A/D filter: -9.255963e+061 result=40 13:12:05 Get A/D value=-858993460 result=40 13:12:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:05 Aux= 13:12:05 Message to Camera, serial 275585 queued 13:12:42 Received message from Master: op=PointingHead serial=275598 13:12:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:12:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:12:42 Point started: ret=0 13:12:42 point_skyscan result=0 13:12:43 Check angles 13:12:43 SkyScan query 13:12:44 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.42<-17428 Statuses=0009 0009 13:12:44 Msec=0 True Az=109.14 Ze=-81.42 Az status=0009 Ze status=0009 13:12:44 Check angles 13:12:44 SkyScan query 13:12:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.39<-18826 Statuses=0008 0009 13:12:45 Msec=750 True Az=112.995 Ze=-102.39 Az status=0008 Ze status=0009 13:12:45 Check angles 13:12:45 SkyScan query 13:12:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.345<-20223 Statuses=0008 0009 13:12:45 Msec=1500 True Az=112.995 Ze=-123.345 Az status=0008 Ze status=0009 13:12:45 Check angles 13:12:45 SkyScan query 13:12:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.27<-21618 Statuses=0008 0009 13:12:46 Msec=2250 True Az=112.995 Ze=-144.27 Az status=0008 Ze status=0009 13:12:46 Check angles 13:12:46 SkyScan query 13:12:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.21<-23014 Statuses=0008 0009 13:12:47 Msec=3000 True Az=112.995 Ze=-165.21 Az status=0008 Ze status=0009 13:12:47 Check angles 13:12:47 SkyScan query 13:12:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:12:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:12:48 Message to Master queued w/err=0: serial=275598 error=0 13:12:53 Received message from Master: op=Filter serial=275599 13:12:53 Color wheel filter change from 0 to 0 13:12:53 FLIGetFilterPos err=0 currentPosition=0 13:12:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:53 Filter is already there-color wheel unchanged 13:12:53 Received message from Master: op=Shutter serial=275600 13:12:53 Shutter LASER open 13:12:53 Received message from Camera: op=State serial=275602 13:12:53 GetSingleValue result=40 Value=cccccccc 13:12:53 SkyScan query 13:12:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:12:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:53 Parameters OK 13:12:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:53 Set A/D data flow result=40 13:12:53 Set A/D channel type result=40 13:12:53 Set A/D encoding result=40 13:12:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:53 Set channel filter=0.000000e+000 result=40 13:12:53 Config A/D Result=40 13:12:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:53 Get A/D filter: -9.255963e+061 result=40 13:12:53 Get A/D value=-858993460 result=40 13:12:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:53 Parameters OK 13:12:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:53 Set A/D data flow result=40 13:12:53 Set A/D channel type result=40 13:12:53 Set A/D encoding result=40 13:12:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:53 Set channel filter=0.000000e+000 result=40 13:12:53 Config A/D Result=40 13:12:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:53 Get A/D filter: -9.255963e+061 result=40 13:12:53 Get A/D value=-858993460 result=40 13:12:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:53 Aux= 13:12:53 Message to Camera, serial 275602 queued 13:13:02 Received message from Master: op=Shutter serial=275612 13:13:02 Shutter LASER close 13:13:02 Received message from Master: op=PointingHead serial=275616 13:13:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:13:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:13:03 Point started: ret=0 13:13:03 point_skyscan result=0 13:13:03 Check angles 13:13:03 SkyScan query 13:13:04 SkyScan query done: ret=0 az=90.03<-6002 ze=157.35<-1510 Statuses=0009 0009 13:13:04 Msec=0 True Az=90.03 Ze=157.35 Az status=0009 Ze status=0009 13:13:04 Check angles 13:13:04 SkyScan query 13:13:05 SkyScan query done: ret=0 az=72.54<-4836 ze=136.38<-2908 Statuses=0009 0009 13:13:05 Msec=750 True Az=72.54 Ze=136.38 Az status=0009 Ze status=0009 13:13:05 Check angles 13:13:05 SkyScan query 13:13:06 SkyScan query done: ret=0 az=55.155<-3677 ze=115.485<-4301 Statuses=0009 0009 13:13:06 Msec=1500 True Az=55.155 Ze=115.485 Az status=0009 Ze status=0009 13:13:06 Check angles 13:13:06 SkyScan query 13:13:06 SkyScan query done: ret=0 az=41.01<-2734 ze=94.47<-5702 Statuses=0009 0009 13:13:06 Msec=2250 True Az=41.01 Ze=94.47 Az status=0009 Ze status=0009 13:13:06 Check angles 13:13:06 SkyScan query 13:13:07 SkyScan query done: ret=0 az=40.995<-2733 ze=73.575<-7095 Statuses=0008 0009 13:13:07 Msec=3000 True Az=40.995 Ze=73.575 Az status=0008 Ze status=0009 13:13:07 Check angles 13:13:07 SkyScan query 13:13:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.92<-8472 Statuses=0008 0009 13:13:08 Msec=3750 True Az=40.995 Ze=52.92 Az status=0008 Ze status=0009 13:13:08 Check angles 13:13:08 SkyScan query 13:13:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:13:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:13:09 Message to Master queued w/err=0: serial=275616 error=0 13:13:14 Received message from Master: op=Filter serial=275617 13:13:14 Color wheel filter change from 0 to 0 13:13:14 FLIGetFilterPos err=0 currentPosition=0 13:13:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:14 Filter is already there-color wheel unchanged 13:13:14 Received message from Master: op=Shutter serial=275618 13:13:14 Shutter LASER close 13:13:14 Received message from Camera: op=State serial=275620 13:13:14 GetSingleValue result=40 Value=cccccccc 13:13:14 SkyScan query 13:13:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:13:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:14 Parameters OK 13:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:14 Set A/D data flow result=40 13:13:14 Set A/D channel type result=40 13:13:14 Set A/D encoding result=40 13:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:14 Set channel filter=0.000000e+000 result=40 13:13:14 Config A/D Result=40 13:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:14 Get A/D filter: -9.255963e+061 result=40 13:13:14 Get A/D value=-858993460 result=40 13:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:14 Parameters OK 13:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:14 Set A/D data flow result=40 13:13:14 Set A/D channel type result=40 13:13:14 Set A/D encoding result=40 13:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:14 Set channel filter=0.000000e+000 result=40 13:13:14 Config A/D Result=40 13:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:14 Get A/D filter: -9.255963e+061 result=40 13:13:14 Get A/D value=-858993460 result=40 13:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:14 Aux= 13:13:14 Message to Camera, serial 275620 queued 13:13:51 Received message from Master: op=PointingHead serial=275633 13:13:51 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:13:51 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:13:52 Point started: ret=0 13:13:52 point_skyscan result=0 13:13:52 Check angles 13:13:52 SkyScan query 13:13:53 SkyScan query done: ret=0 az=64.185<-4279 ze=66.525<-7565 Statuses=0009 0008 13:13:53 Msec=0 True Az=64.185 Ze=66.525 Az status=0009 Ze status=0008 13:13:53 Check angles 13:13:53 SkyScan query 13:13:54 SkyScan query done: ret=0 az=82.11<-5474 ze=66.525<-7565 Statuses=0009 0008 13:13:54 Msec=750 True Az=82.11 Ze=66.525 Az status=0009 Ze status=0008 13:13:54 Check angles 13:13:54 SkyScan query 13:13:54 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 13:13:54 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 13:13:55 Check angles 13:13:55 SkyScan query 13:13:55 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 13:13:55 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 13:13:55 Check angles 13:13:55 SkyScan query 13:13:56 SkyScan query done: ret=0 az=134.775<-8985 ze=66.495<-7567 Statuses=0009 0008 13:13:56 Msec=3000 True Az=134.775 Ze=66.495 Az status=0009 Ze status=0008 13:13:56 Check angles 13:13:56 SkyScan query 13:13:57 SkyScan query done: ret=0 az=152.58<-10172 ze=66.495<-7567 Statuses=0009 0008 13:13:57 Msec=3750 True Az=152.58 Ze=66.495 Az status=0009 Ze status=0008 13:13:57 Check angles 13:13:57 SkyScan query 13:13:57 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:13:57 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:13:57 Message to Master queued w/err=0: serial=275633 error=0 13:14:02 Received message from Master: op=Filter serial=275634 13:14:02 Color wheel filter change from 0 to 0 13:14:02 FLIGetFilterPos err=0 currentPosition=0 13:14:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:02 Filter is already there-color wheel unchanged 13:14:03 Received message from Master: op=Shutter serial=275635 13:14:03 Shutter LASER close 13:14:03 Received message from Camera: op=State serial=275637 13:14:03 GetSingleValue result=40 Value=cccccccc 13:14:03 SkyScan query 13:14:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:14:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:03 Parameters OK 13:14:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:03 Set A/D data flow result=40 13:14:03 Set A/D channel type result=40 13:14:03 Set A/D encoding result=40 13:14:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:03 Set channel filter=0.000000e+000 result=40 13:14:03 Config A/D Result=40 13:14:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:03 Get A/D filter: -9.255963e+061 result=40 13:14:03 Get A/D value=-858993460 result=40 13:14:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:03 Parameters OK 13:14:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:03 Set A/D data flow result=40 13:14:03 Set A/D channel type result=40 13:14:03 Set A/D encoding result=40 13:14:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:03 Set channel filter=0.000000e+000 result=40 13:14:03 Config A/D Result=40 13:14:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:03 Get A/D filter: -9.255963e+061 result=40 13:14:03 Get A/D value=-858993460 result=40 13:14:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:03 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:03 Aux= 13:14:03 Message to Camera, serial 275637 queued 13:14:40 Received message from Master: op=PointingHead serial=275650 13:14:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:14:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:14:40 Point started: ret=0 13:14:40 point_skyscan result=0 13:14:41 Check angles 13:14:41 SkyScan query 13:14:42 SkyScan query done: ret=0 az=135.27<-9018 ze=36.975<-9535 Statuses=0009 0009 13:14:42 Msec=0 True Az=135.27 Ze=36.975 Az status=0009 Ze status=0009 13:14:42 Check angles 13:14:42 SkyScan query 13:14:43 SkyScan query done: ret=0 az=117.795<-7853 ze=15.975<-10935 Statuses=0009 0009 13:14:43 Msec=750 True Az=117.795 Ze=15.975 Az status=0009 Ze status=0009 13:14:43 Check angles 13:14:43 SkyScan query 13:14:43 SkyScan query done: ret=0 az=100.35<-6690 ze=-4.905<-12327 Statuses=0009 0009 13:14:43 Msec=1500 True Az=100.35 Ze=-4.905 Az status=0009 Ze status=0009 13:14:43 Check angles 13:14:43 SkyScan query 13:14:44 SkyScan query done: ret=0 az=82.845<-5523 ze=-25.875<-13725 Statuses=0009 0009 13:14:44 Msec=2250 True Az=82.845 Ze=-25.875 Az status=0009 Ze status=0009 13:14:44 Check angles 13:14:44 SkyScan query 13:14:45 SkyScan query done: ret=0 az=65.385<-4359 ze=-38.58<-14572 Statuses=0009 0008 13:14:45 Msec=3000 True Az=65.385 Ze=-38.58 Az status=0009 Ze status=0008 13:14:45 Check angles 13:14:45 SkyScan query 13:14:46 SkyScan query done: ret=0 az=47.91<-3194 ze=-38.52<-14568 Statuses=0009 0008 13:14:46 Msec=3750 True Az=47.91 Ze=-38.52 Az status=0009 Ze status=0008 13:14:46 Check angles 13:14:46 SkyScan query 13:14:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:14:46 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:14:46 Message to Master queued w/err=0: serial=275650 error=0 13:14:51 Received message from Master: op=Filter serial=275651 13:14:51 Color wheel filter change from 0 to 0 13:14:51 FLIGetFilterPos err=0 currentPosition=0 13:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:51 Filter is already there-color wheel unchanged 13:14:51 Received message from Master: op=Shutter serial=275652 13:14:51 Shutter LASER close 13:14:51 Received message from Camera: op=State serial=275654 13:14:51 GetSingleValue result=40 Value=cccccccc 13:14:51 SkyScan query 13:14:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:14:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:52 Parameters OK 13:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:52 Set A/D data flow result=40 13:14:52 Set A/D channel type result=40 13:14:52 Set A/D encoding result=40 13:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:52 Set channel filter=0.000000e+000 result=40 13:14:52 Config A/D Result=40 13:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:52 Get A/D filter: -9.255963e+061 result=40 13:14:52 Get A/D value=-858993460 result=40 13:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:52 Parameters OK 13:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:52 Set A/D data flow result=40 13:14:52 Set A/D channel type result=40 13:14:52 Set A/D encoding result=40 13:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:52 Set channel filter=0.000000e+000 result=40 13:14:52 Config A/D Result=40 13:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:52 Get A/D filter: -9.255963e+061 result=40 13:14:52 Get A/D value=-858993460 result=40 13:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:52 Aux= 13:14:52 Message to Camera, serial 275654 queued 13:15:27 Received message from Master: op=Identify serial=275662 13:15:29 Received message from Master: op=PointingHead serial=275670 13:15:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:15:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:15:29 Point started: ret=0 13:15:29 point_skyscan result=0 13:15:30 Check angles 13:15:30 SkyScan query 13:15:31 SkyScan query done: ret=0 az=64.26<-4284 ze=-68.715<-16581 Statuses=0009 0009 13:15:31 Msec=0 True Az=64.26 Ze=-68.715 Az status=0009 Ze status=0009 13:15:31 Check angles [UTC 2018-12-19 13:15:31] 13:15:31 SkyScan query 13:15:31 SkyScan query done: ret=0 az=83.745<-5583 ze=-91.83<-18122 Statuses=0009 0009 13:15:31 Msec=750 True Az=83.745 Ze=-91.83 Az status=0009 Ze status=0009 13:15:32 Check angles 13:15:32 SkyScan query 13:15:32 SkyScan query done: ret=0 az=99.675<-6645 ze=-111.015<-19401 Statuses=0009 0009 13:15:32 Msec=1500 True Az=99.675 Ze=-111.015 Az status=0009 Ze status=0009 13:15:32 Check angles 13:15:32 SkyScan query 13:15:33 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.97<-20798 Statuses=0009 0009 13:15:33 Msec=2250 True Az=117.09 Ze=-131.97 Az status=0009 Ze status=0009 13:15:33 Check angles 13:15:33 SkyScan query 13:15:34 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 13:15:34 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 13:15:34 Check angles 13:15:34 SkyScan query 13:15:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:15:34 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:15:34 Message to Master queued w/err=0: serial=275670 error=0 13:15:39 Received message from Master: op=Filter serial=275671 13:15:39 Color wheel filter change from 0 to 0 13:15:39 FLIGetFilterPos err=0 currentPosition=0 13:15:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:39 Filter is already there-color wheel unchanged 13:15:40 Received message from Master: op=Shutter serial=275672 13:15:40 Shutter LASER close 13:15:40 Received message from Camera: op=State serial=275674 13:15:40 GetSingleValue result=40 Value=cccccccc 13:15:40 SkyScan query 13:15:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:15:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:40 Parameters OK 13:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:40 Set A/D data flow result=40 13:15:40 Set A/D channel type result=40 13:15:40 Set A/D encoding result=40 13:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:40 Set channel filter=0.000000e+000 result=40 13:15:40 Config A/D Result=40 13:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:40 Get A/D filter: -9.255963e+061 result=40 13:15:40 Get A/D value=-858993460 result=40 13:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:40 Parameters OK 13:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:40 Set A/D data flow result=40 13:15:40 Set A/D channel type result=40 13:15:40 Set A/D encoding result=40 13:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:40 Set channel filter=0.000000e+000 result=40 13:15:40 Config A/D Result=40 13:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:40 Get A/D filter: -9.255963e+061 result=40 13:15:40 Get A/D value=-858993460 result=40 13:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:40 Aux= 13:15:40 Message to Camera, serial 275674 queued [UTC 2018-12-19 13:15:52] 13:16:16 Received message from Master: op=PointingHead serial=275686 13:16:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:16:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:16:16 Point started: ret=0 13:16:16 point_skyscan result=0 13:16:17 Check angles 13:16:17 SkyScan query 13:16:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 13:16:18 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 13:16:18 Check angles 13:16:18 SkyScan query 13:16:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:16:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:16:18 Message to Master queued w/err=0: serial=275686 error=0 13:16:23 Received message from Master: op=Filter serial=275687 13:16:23 Color wheel filter change from 0 to 0 13:16:23 FLIGetFilterPos err=0 currentPosition=0 13:16:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:23 Filter is already there-color wheel unchanged 13:16:24 Received message from Master: op=Shutter serial=275688 13:16:24 Shutter LASER open 13:16:24 Received message from Camera: op=State serial=275690 13:16:24 GetSingleValue result=40 Value=cccccccc 13:16:24 SkyScan query 13:16:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:16:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:24 Parameters OK 13:16:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:24 Set A/D data flow result=40 13:16:24 Set A/D channel type result=40 13:16:24 Set A/D encoding result=40 13:16:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:24 Set channel filter=0.000000e+000 result=40 13:16:24 Config A/D Result=40 13:16:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:24 Get A/D filter: -9.255963e+061 result=40 13:16:24 Get A/D value=-858993460 result=40 13:16:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:24 Parameters OK 13:16:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:24 Set A/D data flow result=40 13:16:24 Set A/D channel type result=40 13:16:24 Set A/D encoding result=40 13:16:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:24 Set channel filter=0.000000e+000 result=40 13:16:24 Config A/D Result=40 13:16:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:24 Get A/D filter: -9.255963e+061 result=40 13:16:24 Get A/D value=-858993460 result=40 13:16:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:24 Aux= 13:16:24 Message to Camera, serial 275690 queued 13:16:33 Received message from Master: op=Shutter serial=275700 13:16:33 Shutter LASER close 13:16:33 Received message from Master: op=PointingHead serial=275704 13:16:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:16:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:16:34 Point started: ret=0 13:16:34 point_skyscan result=0 13:16:35 Check angles 13:16:35 SkyScan query 13:16:35 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.28<-21552 Statuses=0009 0009 13:16:35 Msec=0 True Az=135.975 Ze=-143.28 Az status=0009 Ze status=0009 13:16:35 Check angles 13:16:35 SkyScan query 13:16:36 SkyScan query done: ret=0 az=153.945<-10263 ze=-121.86<-20124 Statuses=0009 0009 13:16:36 Msec=750 True Az=153.945 Ze=-121.86 Az status=0009 Ze status=0009 13:16:36 Check angles 13:16:36 SkyScan query 13:16:37 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.845<-18723 Statuses=0009 0009 13:16:37 Msec=1500 True Az=171.375 Ze=-100.845 Az status=0009 Ze status=0009 13:16:37 Check angles 13:16:37 SkyScan query 13:16:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.95<-17330 Statuses=0008 0009 13:16:37 Msec=2250 True Az=176.01 Ze=-79.95 Az status=0008 Ze status=0009 13:16:38 Check angles 13:16:38 SkyScan query 13:16:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.965<-15931 Statuses=0008 0009 13:16:38 Msec=3000 True Az=175.995 Ze=-58.965 Az status=0008 Ze status=0009 13:16:38 Check angles 13:16:38 SkyScan query 13:16:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:16:39 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:16:39 Message to Master queued w/err=0: serial=275704 error=0 13:16:44 Received message from Master: op=Filter serial=275705 13:16:44 Color wheel filter change from 0 to 0 13:16:44 FLIGetFilterPos err=0 currentPosition=0 13:16:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:44 Filter is already there-color wheel unchanged 13:16:44 Received message from Master: op=Shutter serial=275706 13:16:44 Shutter LASER close 13:16:44 Received message from Camera: op=State serial=275708 13:16:44 GetSingleValue result=40 Value=cccccccc 13:16:44 SkyScan query 13:16:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:16:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:45 Parameters OK 13:16:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:45 Set A/D data flow result=40 13:16:45 Set A/D channel type result=40 13:16:45 Set A/D encoding result=40 13:16:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:45 Set channel filter=0.000000e+000 result=40 13:16:45 Config A/D Result=40 13:16:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:45 Get A/D filter: -9.255963e+061 result=40 13:16:45 Get A/D value=-858993460 result=40 13:16:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:45 Parameters OK 13:16:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:45 Set A/D data flow result=40 13:16:45 Set A/D channel type result=40 13:16:45 Set A/D encoding result=40 13:16:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:45 Set channel filter=0.000000e+000 result=40 13:16:45 Config A/D Result=40 13:16:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:45 Get A/D filter: -9.255963e+061 result=40 13:16:45 Get A/D value=-858993460 result=40 13:16:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:45 Aux= 13:16:45 Message to Camera, serial 275708 queued 13:17:22 Received message from Master: op=PointingHead serial=275721 13:17:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:17:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:17:22 Point started: ret=0 13:17:22 point_skyscan result=0 13:17:23 Check angles 13:17:23 SkyScan query 13:17:23 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.825<-13455 Statuses=0009 0009 13:17:23 Msec=0 True Az=152.97 Ze=-21.825 Az status=0009 Ze status=0009 13:17:23 Check angles 13:17:23 SkyScan query 13:17:24 SkyScan query done: ret=0 az=135.555<-9037 ze=-0.795<-12053 Statuses=0009 0009 13:17:24 Msec=750 True Az=135.555 Ze=-0.795 Az status=0009 Ze status=0009 13:17:24 Check angles 13:17:24 SkyScan query 13:17:25 SkyScan query done: ret=0 az=117.63<-7842 ze=20.58<-10628 Statuses=0009 0009 13:17:25 Msec=1500 True Az=117.63 Ze=20.58 Az status=0009 Ze status=0009 13:17:25 Check angles 13:17:25 SkyScan query 13:17:26 SkyScan query done: ret=0 az=100.275<-6685 ze=41.55<-9230 Statuses=0009 0009 13:17:26 Msec=2250 True Az=100.275 Ze=41.55 Az status=0009 Ze status=0009 13:17:26 Check angles 13:17:26 SkyScan query 13:17:26 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:17:26 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:17:27 Check angles 13:17:27 SkyScan query 13:17:27 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 13:17:27 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 13:17:27 Message to Master queued w/err=0: serial=275721 error=0 13:17:32 Received message from Master: op=Filter serial=275722 13:17:32 Color wheel filter change from 0 to 0 13:17:32 FLIGetFilterPos err=0 currentPosition=0 13:17:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:32 Filter is already there-color wheel unchanged 13:17:32 Received message from Master: op=Shutter serial=275723 13:17:32 Shutter LASER close 13:17:32 Received message from Camera: op=State serial=275725 13:17:32 GetSingleValue result=40 Value=cccccccc 13:17:32 SkyScan query 13:17:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:17:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:33 Parameters OK 13:17:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:33 Set A/D data flow result=40 13:17:33 Set A/D channel type result=40 13:17:33 Set A/D encoding result=40 13:17:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:33 Set channel filter=0.000000e+000 result=40 13:17:33 Config A/D Result=40 13:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:33 Get A/D filter: -9.255963e+061 result=40 13:17:33 Get A/D value=-858993460 result=40 13:17:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:33 Parameters OK 13:17:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:33 Set A/D data flow result=40 13:17:33 Set A/D channel type result=40 13:17:33 Set A/D encoding result=40 13:17:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:33 Set channel filter=0.000000e+000 result=40 13:17:33 Config A/D Result=40 13:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:33 Get A/D filter: -9.255963e+061 result=40 13:17:33 Get A/D value=-858993460 result=40 13:17:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:33 Aux= 13:17:33 Message to Camera, serial 275725 queued 13:18:10 Received message from Master: op=PointingHead serial=275738 13:18:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:18:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:18:10 Point started: ret=0 13:18:10 point_skyscan result=0 13:18:11 Check angles 13:18:11 SkyScan query 13:18:11 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 13:18:11 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 13:18:12 Check angles 13:18:12 SkyScan query 13:18:12 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 13:18:12 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 13:18:12 Check angles 13:18:12 SkyScan query 13:18:13 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 13:18:13 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 13:18:13 Check angles 13:18:13 SkyScan query 13:18:14 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 13:18:14 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 13:18:14 Check angles 13:18:14 SkyScan query 13:18:14 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:18:14 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:18:15 Check angles 13:18:15 SkyScan query 13:18:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:18:15 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:18:15 Message to Master queued w/err=0: serial=275738 error=0 13:18:20 Received message from Master: op=Filter serial=275739 13:18:20 Color wheel filter change from 0 to 0 13:18:20 FLIGetFilterPos err=0 currentPosition=0 13:18:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:20 Filter is already there-color wheel unchanged 13:18:20 Received message from Master: op=Shutter serial=275740 13:18:20 Shutter LASER close 13:18:20 Received message from Camera: op=State serial=275742 13:18:20 GetSingleValue result=40 Value=cccccccc 13:18:20 SkyScan query 13:18:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:18:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:21 Parameters OK 13:18:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:21 Set A/D data flow result=40 13:18:21 Set A/D channel type result=40 13:18:21 Set A/D encoding result=40 13:18:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:21 Set channel filter=0.000000e+000 result=40 13:18:21 Config A/D Result=40 13:18:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:21 Get A/D filter: -9.255963e+061 result=40 13:18:21 Get A/D value=-858993460 result=40 13:18:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:21 Parameters OK 13:18:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:21 Set A/D data flow result=40 13:18:21 Set A/D channel type result=40 13:18:21 Set A/D encoding result=40 13:18:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:21 Set channel filter=0.000000e+000 result=40 13:18:21 Config A/D Result=40 13:18:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:21 Get A/D filter: -9.255963e+061 result=40 13:18:21 Get A/D value=-858993460 result=40 13:18:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:21 Aux= 13:18:21 Message to Camera, serial 275742 queued 13:18:58 Received message from Master: op=PointingHead serial=275755 13:18:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:18:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:18:58 Point started: ret=0 13:18:58 point_skyscan result=0 13:18:59 Check angles 13:18:59 SkyScan query 13:18:59 SkyScan query done: ret=0 az=153.15<-10210 ze=8.925<-11405 Statuses=0009 0009 13:18:59 Msec=0 True Az=153.15 Ze=8.925 Az status=0009 Ze status=0009 13:19:00 Check angles 13:19:00 SkyScan query 13:19:00 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.105<-12807 Statuses=0009 0009 13:19:00 Msec=750 True Az=135.705 Ze=-12.105 Az status=0009 Ze status=0009 13:19:00 Check angles 13:19:00 SkyScan query 13:19:01 SkyScan query done: ret=0 az=118.2<-7880 ze=-33<-14200 Statuses=0009 0009 13:19:01 Msec=1500 True Az=118.2 Ze=-33 Az status=0009 Ze status=0009 13:19:01 Check angles 13:19:01 SkyScan query 13:19:02 SkyScan query done: ret=0 az=100.785<-6719 ze=-51.51<-15434 Statuses=0009 0009 13:19:02 Msec=2250 True Az=100.785 Ze=-51.51 Az status=0009 Ze status=0009 13:19:02 Check angles 13:19:02 SkyScan query 13:19:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 13:19:02 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 13:19:03 Check angles 13:19:03 SkyScan query 13:19:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:19:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:19:03 Message to Master queued w/err=0: serial=275755 error=0 13:19:08 Received message from Master: op=Filter serial=275756 13:19:08 Color wheel filter change from 0 to 0 13:19:08 FLIGetFilterPos err=0 currentPosition=0 13:19:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:08 Filter is already there-color wheel unchanged 13:19:08 Received message from Master: op=Shutter serial=275757 13:19:08 Shutter LASER close 13:19:08 Received message from Camera: op=State serial=275759 13:19:08 GetSingleValue result=40 Value=cccccccc 13:19:08 SkyScan query 13:19:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:19:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:09 Parameters OK 13:19:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:09 Set A/D data flow result=40 13:19:09 Set A/D channel type result=40 13:19:09 Set A/D encoding result=40 13:19:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:09 Set channel filter=0.000000e+000 result=40 13:19:09 Config A/D Result=40 13:19:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:09 Get A/D filter: -9.255963e+061 result=40 13:19:09 Get A/D value=-858993460 result=40 13:19:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:09 Parameters OK 13:19:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:09 Set A/D data flow result=40 13:19:09 Set A/D channel type result=40 13:19:09 Set A/D encoding result=40 13:19:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:09 Set channel filter=0.000000e+000 result=40 13:19:09 Config A/D Result=40 13:19:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:09 Get A/D filter: -9.255963e+061 result=40 13:19:09 Get A/D value=-858993460 result=40 13:19:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:09 Aux= 13:19:09 Message to Camera, serial 275759 queued 13:19:46 Received message from Master: op=PointingHead serial=275772 13:19:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:19:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:19:46 Point started: ret=0 13:19:46 point_skyscan result=0 13:19:47 Check angles 13:19:47 SkyScan query 13:19:48 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.375<-17425 Statuses=0009 0009 13:19:48 Msec=0 True Az=109.155 Ze=-81.375 Az status=0009 Ze status=0009 13:19:48 Check angles 13:19:48 SkyScan query 13:19:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 13:19:48 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 13:19:48 Check angles 13:19:48 SkyScan query 13:19:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 13:19:49 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 13:19:49 Check angles 13:19:49 SkyScan query 13:19:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 13:19:50 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 13:19:50 Check angles 13:19:50 SkyScan query 13:19:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.05<-23070 Statuses=0008 0009 13:19:51 Msec=3000 True Az=112.995 Ze=-166.05 Az status=0008 Ze status=0009 13:19:51 Check angles 13:19:51 SkyScan query 13:19:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:19:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:19:51 Message to Master queued w/err=0: serial=275772 error=0 13:19:56 Received message from Master: op=Filter serial=275773 13:19:56 Color wheel filter change from 0 to 0 13:19:56 FLIGetFilterPos err=0 currentPosition=0 13:19:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:56 Filter is already there-color wheel unchanged 13:19:56 Received message from Master: op=Shutter serial=275774 13:19:56 Shutter LASER open 13:19:57 Received message from Camera: op=State serial=275776 13:19:57 GetSingleValue result=40 Value=cccccccc 13:19:57 SkyScan query 13:19:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:19:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:57 Parameters OK 13:19:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:57 Set A/D data flow result=40 13:19:57 Set A/D channel type result=40 13:19:57 Set A/D encoding result=40 13:19:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:57 Set channel filter=0.000000e+000 result=40 13:19:57 Config A/D Result=40 13:19:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:57 Get A/D filter: -9.255963e+061 result=40 13:19:57 Get A/D value=-858993460 result=40 13:19:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:57 Parameters OK 13:19:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:57 Set A/D data flow result=40 13:19:57 Set A/D channel type result=40 13:19:57 Set A/D encoding result=40 13:19:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:57 Set channel filter=0.000000e+000 result=40 13:19:57 Config A/D Result=40 13:19:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:57 Get A/D filter: -9.255963e+061 result=40 13:19:57 Get A/D value=-858993460 result=40 13:19:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:57 Aux= 13:19:57 Message to Camera, serial 275776 queued 13:20:06 Received message from Master: op=Shutter serial=275786 13:20:06 Shutter LASER close 13:20:06 Received message from Master: op=PointingHead serial=275790 13:20:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:20:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:20:07 Point started: ret=0 13:20:07 point_skyscan result=0 13:20:07 Check angles 13:20:07 SkyScan query 13:20:08 SkyScan query done: ret=0 az=89.82<-5988 ze=157.08<-1528 Statuses=0009 0009 13:20:08 Msec=0 True Az=89.82 Ze=157.08 Az status=0009 Ze status=0009 13:20:08 Check angles 13:20:08 SkyScan query 13:20:09 SkyScan query done: ret=0 az=71.985<-4799 ze=135.735<-2951 Statuses=0009 0009 13:20:09 Msec=750 True Az=71.985 Ze=135.735 Az status=0009 Ze status=0009 13:20:09 Check angles 13:20:09 SkyScan query 13:20:09 SkyScan query done: ret=0 az=54.54<-3636 ze=114.705<-4353 Statuses=0009 0009 13:20:09 Msec=1500 True Az=54.54 Ze=114.705 Az status=0009 Ze status=0009 13:20:10 Check angles 13:20:10 SkyScan query 13:20:10 SkyScan query done: ret=0 az=40.98<-2732 ze=93.825<-5745 Statuses=0009 0009 13:20:10 Msec=2250 True Az=40.98 Ze=93.825 Az status=0009 Ze status=0009 13:20:10 Check angles 13:20:10 SkyScan query 13:20:11 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 13:20:11 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 13:20:11 Check angles 13:20:11 SkyScan query 13:20:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.245<-8517 Statuses=0008 0009 13:20:12 Msec=3750 True Az=40.995 Ze=52.245 Az status=0008 Ze status=0009 13:20:12 Check angles 13:20:12 SkyScan query 13:20:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:20:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:20:12 Message to Master queued w/err=0: serial=275790 error=0 13:20:17 Received message from Master: op=Filter serial=275791 13:20:17 Color wheel filter change from 0 to 0 13:20:17 FLIGetFilterPos err=0 currentPosition=0 13:20:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:17 Filter is already there-color wheel unchanged 13:20:18 Received message from Master: op=Shutter serial=275792 13:20:18 Shutter LASER close 13:20:18 Received message from Camera: op=State serial=275794 13:20:18 GetSingleValue result=40 Value=cccccccc 13:20:18 SkyScan query 13:20:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:20:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:18 Parameters OK 13:20:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:18 Set A/D data flow result=40 13:20:18 Set A/D channel type result=40 13:20:18 Set A/D encoding result=40 13:20:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:18 Set channel filter=0.000000e+000 result=40 13:20:18 Config A/D Result=40 13:20:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:18 Get A/D filter: -9.255963e+061 result=40 13:20:18 Get A/D value=-858993460 result=40 13:20:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:18 Parameters OK 13:20:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:18 Set A/D data flow result=40 13:20:18 Set A/D channel type result=40 13:20:18 Set A/D encoding result=40 13:20:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:18 Set channel filter=0.000000e+000 result=40 13:20:18 Config A/D Result=40 13:20:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:18 Get A/D filter: -9.255963e+061 result=40 13:20:18 Get A/D value=-858993460 result=40 13:20:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:18 Aux= 13:20:18 Message to Camera, serial 275794 queued 13:20:55 Received message from Master: op=PointingHead serial=275807 13:20:55 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:20:55 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:20:55 Point started: ret=0 13:20:55 point_skyscan result=0 13:20:56 Check angles 13:20:56 SkyScan query 13:20:57 SkyScan query done: ret=0 az=63.855<-4257 ze=66.54<-7564 Statuses=0009 0008 13:20:57 Msec=0 True Az=63.855 Ze=66.54 Az status=0009 Ze status=0008 13:20:57 Check angles 13:20:57 SkyScan query 13:20:58 SkyScan query done: ret=0 az=81.18<-5412 ze=66.51<-7566 Statuses=0009 0008 13:20:58 Msec=750 True Az=81.18 Ze=66.51 Az status=0009 Ze status=0008 13:20:58 Check angles 13:20:58 SkyScan query 13:20:58 SkyScan query done: ret=0 az=98.58<-6572 ze=66.495<-7567 Statuses=0009 0008 13:20:58 Msec=1500 True Az=98.58 Ze=66.495 Az status=0009 Ze status=0008 13:20:58 Check angles 13:20:58 SkyScan query 13:20:59 SkyScan query done: ret=0 az=116.085<-7739 ze=66.495<-7567 Statuses=0009 0008 13:20:59 Msec=2250 True Az=116.085 Ze=66.495 Az status=0009 Ze status=0008 13:20:59 Check angles 13:20:59 SkyScan query 13:21:00 SkyScan query done: ret=0 az=133.5<-8900 ze=66.495<-7567 Statuses=0009 0008 13:21:00 Msec=3000 True Az=133.5 Ze=66.495 Az status=0009 Ze status=0008 13:21:00 Check angles 13:21:00 SkyScan query 13:21:01 SkyScan query done: ret=0 az=151.395<-10093 ze=66.495<-7567 Statuses=0009 0008 13:21:01 Msec=3750 True Az=151.395 Ze=66.495 Az status=0009 Ze status=0008 13:21:01 Check angles 13:21:01 SkyScan query 13:21:01 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:21:01 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:21:01 Message to Master queued w/err=0: serial=275807 error=0 13:21:06 Received message from Master: op=Filter serial=275808 13:21:06 Color wheel filter change from 0 to 0 13:21:06 FLIGetFilterPos err=0 currentPosition=0 13:21:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:06 Filter is already there-color wheel unchanged 13:21:06 Received message from Master: op=Shutter serial=275809 13:21:06 Shutter LASER close 13:21:07 Received message from Camera: op=State serial=275811 13:21:07 GetSingleValue result=40 Value=cccccccc 13:21:07 SkyScan query 13:21:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:21:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:07 Parameters OK 13:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:07 Set A/D data flow result=40 13:21:07 Set A/D channel type result=40 13:21:07 Set A/D encoding result=40 13:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:07 Set channel filter=0.000000e+000 result=40 13:21:07 Config A/D Result=40 13:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:07 Get A/D filter: -9.255963e+061 result=40 13:21:07 Get A/D value=-858993460 result=40 13:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:07 Parameters OK 13:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:07 Set A/D data flow result=40 13:21:07 Set A/D channel type result=40 13:21:07 Set A/D encoding result=40 13:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:07 Set channel filter=0.000000e+000 result=40 13:21:07 Config A/D Result=40 13:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:07 Get A/D filter: -9.255963e+061 result=40 13:21:07 Get A/D value=-858993460 result=40 13:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:07 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:07 Aux= 13:21:07 Message to Camera, serial 275811 queued 13:21:44 Received message from Master: op=PointingHead serial=275824 13:21:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:21:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:21:44 Point started: ret=0 13:21:44 point_skyscan result=0 13:21:45 Check angles 13:21:45 SkyScan query 13:21:46 SkyScan query done: ret=0 az=134.82<-8988 ze=36.63<-9558 Statuses=0009 0009 13:21:46 Msec=0 True Az=134.82 Ze=36.63 Az status=0009 Ze status=0009 13:21:46 Check angles 13:21:46 SkyScan query 13:21:46 SkyScan query done: ret=0 az=117.36<-7824 ze=15.69<-10954 Statuses=0009 0009 13:21:46 Msec=750 True Az=117.36 Ze=15.69 Az status=0009 Ze status=0009 13:21:47 Check angles 13:21:47 SkyScan query 13:21:47 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.265<-12351 Statuses=0009 0009 13:21:47 Msec=1500 True Az=99.975 Ze=-5.265 Az status=0009 Ze status=0009 13:21:47 Check angles 13:21:47 SkyScan query 13:21:48 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.235<-13749 Statuses=0009 0009 13:21:48 Msec=2250 True Az=82.485 Ze=-26.235 Az status=0009 Ze status=0009 13:21:48 Check angles 13:21:48 SkyScan query 13:21:49 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.58<-14572 Statuses=0009 0008 13:21:49 Msec=3000 True Az=64.92 Ze=-38.58 Az status=0009 Ze status=0008 13:21:49 Check angles 13:21:49 SkyScan query 13:21:49 SkyScan query done: ret=0 az=47.535<-3169 ze=-38.52<-14568 Statuses=0009 0008 13:21:49 Msec=3750 True Az=47.535 Ze=-38.52 Az status=0009 Ze status=0008 13:21:50 Check angles 13:21:50 SkyScan query 13:21:50 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 13:21:50 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 13:21:50 Message to Master queued w/err=0: serial=275824 error=0 13:21:55 Received message from Master: op=Filter serial=275825 13:21:55 Color wheel filter change from 0 to 0 13:21:55 FLIGetFilterPos err=0 currentPosition=0 13:21:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:55 Filter is already there-color wheel unchanged 13:21:55 Received message from Master: op=Shutter serial=275826 13:21:55 Shutter LASER close 13:21:55 Received message from Camera: op=State serial=275828 13:21:55 GetSingleValue result=40 Value=cccccccc 13:21:55 SkyScan query 13:21:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:21:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:56 Parameters OK 13:21:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:56 Set A/D data flow result=40 13:21:56 Set A/D channel type result=40 13:21:56 Set A/D encoding result=40 13:21:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:56 Set channel filter=0.000000e+000 result=40 13:21:56 Config A/D Result=40 13:21:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:56 Get A/D filter: -9.255963e+061 result=40 13:21:56 Get A/D value=-858993460 result=40 13:21:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:56 Parameters OK 13:21:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:56 Set A/D data flow result=40 13:21:56 Set A/D channel type result=40 13:21:56 Set A/D encoding result=40 13:21:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:56 Set channel filter=0.000000e+000 result=40 13:21:56 Config A/D Result=40 13:21:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:56 Get A/D filter: -9.255963e+061 result=40 13:21:56 Get A/D value=-858993460 result=40 13:21:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:56 Aux= 13:21:56 Message to Camera, serial 275828 queued 13:22:33 Received message from Master: op=PointingHead serial=275841 13:22:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:22:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:22:33 Point started: ret=0 13:22:33 point_skyscan result=0 13:22:34 Check angles 13:22:34 SkyScan query 13:22:34 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.04<-16536 Statuses=0009 0009 13:22:34 Msec=0 True Az=63.795 Ze=-68.04 Az status=0009 Ze status=0009 13:22:35 Check angles 13:22:35 SkyScan query 13:22:35 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.445<-17963 Statuses=0009 0009 13:22:35 Msec=750 True Az=81.57 Ze=-89.445 Az status=0009 Ze status=0009 13:22:35 Check angles 13:22:35 SkyScan query 13:22:36 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.805<-19387 Statuses=0009 0009 13:22:36 Msec=1500 True Az=99.585 Ze=-110.805 Az status=0009 Ze status=0009 13:22:36 Check angles 13:22:36 SkyScan query 13:22:37 SkyScan query done: ret=0 az=117.24<-7816 ze=-132.18<-20812 Statuses=0009 0009 13:22:37 Msec=2250 True Az=117.24 Ze=-132.18 Az status=0009 Ze status=0009 13:22:37 Check angles 13:22:37 SkyScan query 13:22:37 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 13:22:37 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 13:22:38 Check angles 13:22:38 SkyScan query 13:22:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:22:38 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:22:38 Message to Master queued w/err=0: serial=275841 error=0 13:22:43 Received message from Master: op=Filter serial=275842 13:22:43 Color wheel filter change from 0 to 0 13:22:43 FLIGetFilterPos err=0 currentPosition=0 13:22:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:43 Filter is already there-color wheel unchanged 13:22:43 Received message from Master: op=Shutter serial=275843 13:22:43 Shutter LASER close 13:22:43 Received message from Camera: op=State serial=275845 13:22:43 GetSingleValue result=40 Value=cccccccc 13:22:43 SkyScan query 13:22:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:22:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:44 Parameters OK 13:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:44 Set A/D data flow result=40 13:22:44 Set A/D channel type result=40 13:22:44 Set A/D encoding result=40 13:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:44 Set channel filter=0.000000e+000 result=40 13:22:44 Config A/D Result=40 13:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:44 Get A/D filter: -9.255963e+061 result=40 13:22:44 Get A/D value=-858993460 result=40 13:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:44 Parameters OK 13:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:44 Set A/D data flow result=40 13:22:44 Set A/D channel type result=40 13:22:44 Set A/D encoding result=40 13:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:44 Set channel filter=0.000000e+000 result=40 13:22:44 Config A/D Result=40 13:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:44 Get A/D filter: -9.255963e+061 result=40 13:22:44 Get A/D value=-858993460 result=40 13:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:44 Aux= 13:22:44 Message to Camera, serial 275845 queued 13:23:21 Received message from Master: op=PointingHead serial=275858 13:23:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:23:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:23:21 Point started: ret=0 13:23:21 point_skyscan result=0 13:23:22 Check angles 13:23:22 SkyScan query 13:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0009 0009 13:23:23 Msec=0 True Az=112.995 Ze=-170.94 Az status=0009 Ze status=0009 13:23:23 Check angles 13:23:23 SkyScan query 13:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:23:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:23:23 Message to Master queued w/err=0: serial=275858 error=0 13:23:28 Received message from Master: op=Filter serial=275859 13:23:28 Color wheel filter change from 0 to 0 13:23:28 FLIGetFilterPos err=0 currentPosition=0 13:23:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:28 Filter is already there-color wheel unchanged 13:23:28 Received message from Master: op=Shutter serial=275860 13:23:28 Shutter LASER open 13:23:29 Received message from Camera: op=State serial=275862 13:23:29 GetSingleValue result=40 Value=cccccccc 13:23:29 SkyScan query 13:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:23:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:29 Parameters OK 13:23:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:29 Set A/D data flow result=40 13:23:29 Set A/D channel type result=40 13:23:29 Set A/D encoding result=40 13:23:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:29 Set channel filter=0.000000e+000 result=40 13:23:29 Config A/D Result=40 13:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:29 Get A/D filter: -9.255963e+061 result=40 13:23:29 Get A/D value=-858993460 result=40 13:23:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:29 Parameters OK 13:23:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:29 Set A/D data flow result=40 13:23:29 Set A/D channel type result=40 13:23:29 Set A/D encoding result=40 13:23:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:29 Set channel filter=0.000000e+000 result=40 13:23:29 Config A/D Result=40 13:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:29 Get A/D filter: -9.255963e+061 result=40 13:23:29 Get A/D value=-858993460 result=40 13:23:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:29 Aux= 13:23:29 Message to Camera, serial 275862 queued 13:23:38 Received message from Master: op=Shutter serial=275872 13:23:38 Shutter LASER close 13:23:38 Received message from Master: op=PointingHead serial=275876 13:23:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:23:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:23:39 Point started: ret=0 13:23:39 point_skyscan result=0 13:23:39 Check angles 13:23:39 SkyScan query 13:23:40 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.13<-21542 Statuses=0009 0009 13:23:40 Msec=0 True Az=136.095 Ze=-143.13 Az status=0009 Ze status=0009 13:23:40 Check angles 13:23:40 SkyScan query 13:23:41 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.175<-20145 Statuses=0009 0009 13:23:41 Msec=750 True Az=153.555 Ze=-122.175 Az status=0009 Ze status=0009 13:23:41 Check angles 13:23:41 SkyScan query 13:23:41 SkyScan query done: ret=0 az=171.12<-11408 ze=-101.235<-18749 Statuses=0009 0009 13:23:41 Msec=1500 True Az=171.12 Ze=-101.235 Az status=0009 Ze status=0009 13:23:42 Check angles 13:23:42 SkyScan query 13:23:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.28<-17352 Statuses=0008 0009 13:23:42 Msec=2250 True Az=176.01 Ze=-80.28 Az status=0008 Ze status=0009 13:23:42 Check angles 13:23:42 SkyScan query 13:23:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.355<-15957 Statuses=0008 0009 13:23:43 Msec=3000 True Az=175.995 Ze=-59.355 Az status=0008 Ze status=0009 13:23:43 Check angles 13:23:43 SkyScan query 13:23:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 13:23:44 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 13:23:44 Message to Master queued w/err=0: serial=275876 error=0 13:23:49 Received message from Master: op=Filter serial=275877 13:23:49 Color wheel filter change from 0 to 0 13:23:49 FLIGetFilterPos err=0 currentPosition=0 13:23:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:49 Filter is already there-color wheel unchanged 13:23:49 Received message from Master: op=Shutter serial=275878 13:23:49 Shutter LASER close 13:23:49 Received message from Camera: op=State serial=275880 13:23:49 GetSingleValue result=40 Value=cccccccc 13:23:49 SkyScan query 13:23:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:23:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:50 Parameters OK 13:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:50 Set A/D data flow result=40 13:23:50 Set A/D channel type result=40 13:23:50 Set A/D encoding result=40 13:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:50 Set channel filter=0.000000e+000 result=40 13:23:50 Config A/D Result=40 13:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:50 Get A/D filter: -9.255963e+061 result=40 13:23:50 Get A/D value=-858993460 result=40 13:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:50 Parameters OK 13:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:50 Set A/D data flow result=40 13:23:50 Set A/D channel type result=40 13:23:50 Set A/D encoding result=40 13:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:50 Set channel filter=0.000000e+000 result=40 13:23:50 Config A/D Result=40 13:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:50 Get A/D filter: -9.255963e+061 result=40 13:23:50 Get A/D value=-858993460 result=40 13:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:50 Aux= 13:23:50 Message to Camera, serial 275880 queued 13:24:26 Received message from Master: op=PointingHead serial=275893 13:24:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:24:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:24:27 Point started: ret=0 13:24:27 point_skyscan result=0 13:24:28 Check angles 13:24:28 SkyScan query 13:24:28 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.9<-13460 Statuses=0009 0009 13:24:28 Msec=0 True Az=153.09 Ze=-21.9 Az status=0009 Ze status=0009 13:24:28 Check angles 13:24:28 SkyScan query 13:24:29 SkyScan query done: ret=0 az=135.24<-9016 ze=-0.465<-12031 Statuses=0009 0009 13:24:29 Msec=750 True Az=135.24 Ze=-0.465 Az status=0009 Ze status=0009 13:24:29 Check angles 13:24:29 SkyScan query 13:24:30 SkyScan query done: ret=0 az=117.78<-7852 ze=20.49<-10634 Statuses=0009 0009 13:24:30 Msec=1500 True Az=117.78 Ze=20.49 Az status=0009 Ze status=0009 13:24:30 Check angles 13:24:30 SkyScan query 13:24:30 SkyScan query done: ret=0 az=100.41<-6694 ze=41.475<-9235 Statuses=0009 0009 13:24:30 Msec=2250 True Az=100.41 Ze=41.475 Az status=0009 Ze status=0009 13:24:31 Check angles 13:24:31 SkyScan query 13:24:31 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 13:24:31 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 13:24:31 Check angles 13:24:31 SkyScan query 13:24:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:24:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:24:32 Message to Master queued w/err=0: serial=275893 error=0 13:24:37 Received message from Master: op=Filter serial=275894 13:24:37 Color wheel filter change from 0 to 0 13:24:37 FLIGetFilterPos err=0 currentPosition=0 13:24:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:37 Filter is already there-color wheel unchanged 13:24:37 Received message from Master: op=Shutter serial=275895 13:24:37 Shutter LASER close 13:24:37 Received message from Camera: op=State serial=275897 13:24:37 GetSingleValue result=40 Value=cccccccc 13:24:37 SkyScan query 13:24:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:24:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:38 Parameters OK 13:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:38 Set A/D data flow result=40 13:24:38 Set A/D channel type result=40 13:24:38 Set A/D encoding result=40 13:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:38 Set channel filter=0.000000e+000 result=40 13:24:38 Config A/D Result=40 13:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:38 Get A/D filter: -9.255963e+061 result=40 13:24:38 Get A/D value=-858993460 result=40 13:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:38 Parameters OK 13:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:38 Set A/D data flow result=40 13:24:38 Set A/D channel type result=40 13:24:38 Set A/D encoding result=40 13:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:38 Set channel filter=0.000000e+000 result=40 13:24:38 Config A/D Result=40 13:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:38 Get A/D filter: -9.255963e+061 result=40 13:24:38 Get A/D value=-858993460 result=40 13:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:38 Aux= 13:24:38 Message to Camera, serial 275897 queued 13:25:14 Received message from Master: op=PointingHead serial=275909 13:25:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:25:14 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:25:14 Point started: ret=0 13:25:14 point_skyscan result=0 13:25:15 Check angles 13:25:15 SkyScan query 13:25:15 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 13:25:15 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 13:25:15 Check angles 13:25:15 SkyScan query 13:25:16 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 13:25:16 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 13:25:16 Check angles 13:25:16 SkyScan query 13:25:17 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 13:25:17 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 13:25:17 Check angles 13:25:17 SkyScan query 13:25:17 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 13:25:17 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 13:25:18 Check angles 13:25:18 SkyScan query 13:25:18 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:25:18 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:25:18 Check angles 13:25:18 SkyScan query 13:25:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:25:19 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:25:19 Message to Master queued w/err=0: serial=275909 error=0 13:25:24 Received message from Master: op=Filter serial=275910 13:25:24 Color wheel filter change from 0 to 0 13:25:24 FLIGetFilterPos err=0 currentPosition=0 13:25:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:24 Filter is already there-color wheel unchanged 13:25:24 Received message from Master: op=Shutter serial=275911 13:25:24 Shutter LASER close 13:25:24 Received message from Camera: op=State serial=275913 13:25:24 GetSingleValue result=40 Value=cccccccc 13:25:24 SkyScan query 13:25:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:25:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:25 Parameters OK 13:25:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:25 Set A/D data flow result=40 13:25:25 Set A/D channel type result=40 13:25:25 Set A/D encoding result=40 13:25:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:25 Set channel filter=0.000000e+000 result=40 13:25:25 Config A/D Result=40 13:25:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:25 Get A/D filter: -9.255963e+061 result=40 13:25:25 Get A/D value=-858993460 result=40 13:25:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:25 Parameters OK 13:25:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:25 Set A/D data flow result=40 13:25:25 Set A/D channel type result=40 13:25:25 Set A/D encoding result=40 13:25:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:25 Set channel filter=0.000000e+000 result=40 13:25:25 Config A/D Result=40 13:25:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:25 Get A/D filter: -9.255963e+061 result=40 13:25:25 Get A/D value=-858993460 result=40 13:25:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:25 Aux= 13:25:25 Message to Camera, serial 275913 queued 13:26:02 Received message from Master: op=PointingHead serial=275926 13:26:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:26:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:26:02 Point started: ret=0 13:26:02 point_skyscan result=0 13:26:03 Check angles 13:26:03 SkyScan query 13:26:03 SkyScan query done: ret=0 az=152.865<-10191 ze=8.64<-11424 Statuses=0009 0009 13:26:03 Msec=0 True Az=152.865 Ze=8.64 Az status=0009 Ze status=0009 13:26:04 Check angles 13:26:04 SkyScan query 13:26:04 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.315<-12821 Statuses=0009 0009 13:26:04 Msec=750 True Az=135.345 Ze=-12.315 Az status=0009 Ze status=0009 13:26:04 Check angles 13:26:04 SkyScan query 13:26:05 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.735<-14249 Statuses=0009 0009 13:26:05 Msec=1500 True Az=117.555 Ze=-33.735 Az status=0009 Ze status=0009 13:26:05 Check angles 13:26:05 SkyScan query [UTC 2018-12-19 13:26:06] 13:26:06 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.57<-15438 Statuses=0009 0009 13:26:06 Msec=2250 True Az=100.2 Ze=-51.57 Az status=0009 Ze status=0009 13:26:06 Check angles 13:26:06 SkyScan query 13:26:06 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 13:26:06 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 13:26:07 Check angles 13:26:07 SkyScan query 13:26:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:26:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:26:07 Message to Master queued w/err=0: serial=275926 error=0 13:26:12 Received message from Master: op=Filter serial=275927 13:26:12 Color wheel filter change from 0 to 0 13:26:12 FLIGetFilterPos err=0 currentPosition=0 13:26:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:12 Filter is already there-color wheel unchanged 13:26:12 Received message from Master: op=Shutter serial=275928 13:26:12 Shutter LASER close 13:26:12 Received message from Camera: op=State serial=275930 13:26:12 GetSingleValue result=40 Value=cccccccc 13:26:12 SkyScan query 13:26:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:26:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:13 Parameters OK 13:26:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:13 Set A/D data flow result=40 13:26:13 Set A/D channel type result=40 13:26:13 Set A/D encoding result=40 13:26:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:13 Set channel filter=0.000000e+000 result=40 13:26:13 Config A/D Result=40 13:26:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:13 Get A/D filter: -9.255963e+061 result=40 13:26:13 Get A/D value=-858993460 result=40 13:26:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:13 Parameters OK 13:26:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:13 Set A/D data flow result=40 13:26:13 Set A/D channel type result=40 13:26:13 Set A/D encoding result=40 13:26:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:13 Set channel filter=0.000000e+000 result=40 13:26:13 Config A/D Result=40 13:26:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:13 Get A/D filter: -9.255963e+061 result=40 13:26:13 Get A/D value=-858993460 result=40 13:26:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:13 Aux= 13:26:13 Message to Camera, serial 275930 queued 13:26:50 Received message from Master: op=PointingHead serial=275943 13:26:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:26:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:26:50 Point started: ret=0 13:26:50 point_skyscan result=0 13:26:51 Check angles 13:26:51 SkyScan query 13:26:51 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.48<-17432 Statuses=0009 0009 13:26:51 Msec=0 True Az=109.215 Ze=-81.48 Az status=0009 Ze status=0009 13:26:52 Check angles 13:26:52 SkyScan query 13:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 13:26:52 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 13:26:52 Check angles 13:26:52 SkyScan query 13:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 13:26:53 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 13:26:53 Check angles 13:26:53 SkyScan query 13:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 13:26:54 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 13:26:54 Check angles 13:26:54 SkyScan query 13:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.315<-23021 Statuses=0008 0009 13:26:54 Msec=3000 True Az=112.995 Ze=-165.315 Az status=0008 Ze status=0009 13:26:55 Check angles 13:26:55 SkyScan query 13:26:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:26:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:26:55 Message to Master queued w/err=0: serial=275943 error=0 13:27:00 Received message from Master: op=Filter serial=275944 13:27:00 Color wheel filter change from 0 to 0 13:27:00 FLIGetFilterPos err=0 currentPosition=0 13:27:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:00 Filter is already there-color wheel unchanged 13:27:00 Received message from Master: op=Shutter serial=275945 13:27:00 Shutter LASER open 13:27:01 Received message from Camera: op=State serial=275947 13:27:01 GetSingleValue result=40 Value=cccccccc 13:27:01 SkyScan query 13:27:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:27:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:01 Parameters OK 13:27:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:01 Set A/D data flow result=40 13:27:01 Set A/D channel type result=40 13:27:01 Set A/D encoding result=40 13:27:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:01 Set channel filter=0.000000e+000 result=40 13:27:01 Config A/D Result=40 13:27:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:01 Get A/D filter: -9.255963e+061 result=40 13:27:01 Get A/D value=-858993460 result=40 13:27:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:01 Parameters OK 13:27:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:01 Set A/D data flow result=40 13:27:01 Set A/D channel type result=40 13:27:01 Set A/D encoding result=40 13:27:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:01 Set channel filter=0.000000e+000 result=40 13:27:01 Config A/D Result=40 13:27:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:01 Get A/D filter: -9.255963e+061 result=40 13:27:01 Get A/D value=-858993460 result=40 13:27:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:01 Aux= 13:27:01 Message to Camera, serial 275947 queued 13:27:10 Received message from Master: op=Shutter serial=275957 13:27:10 Shutter LASER close 13:27:10 Received message from Master: op=PointingHead serial=275961 13:27:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:27:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:27:10 Point started: ret=0 13:27:10 point_skyscan result=0 13:27:11 Check angles 13:27:11 SkyScan query 13:27:12 SkyScan query done: ret=0 az=89.535<-5969 ze=156.72<-1552 Statuses=0009 0009 13:27:12 Msec=0 True Az=89.535 Ze=156.72 Az status=0009 Ze status=0009 13:27:12 Check angles 13:27:12 SkyScan query 13:27:12 SkyScan query done: ret=0 az=72.03<-4802 ze=135.81<-2946 Statuses=0009 0009 13:27:12 Msec=750 True Az=72.03 Ze=135.81 Az status=0009 Ze status=0009 13:27:13 Check angles 13:27:13 SkyScan query 13:27:13 SkyScan query done: ret=0 az=54.24<-3616 ze=114.36<-4376 Statuses=0009 0009 13:27:13 Msec=1500 True Az=54.24 Ze=114.36 Az status=0009 Ze status=0009 13:27:13 Check angles 13:27:13 SkyScan query 13:27:14 SkyScan query done: ret=0 az=40.98<-2732 ze=93.45<-5770 Statuses=0009 0009 13:27:14 Msec=2250 True Az=40.98 Ze=93.45 Az status=0009 Ze status=0009 13:27:14 Check angles 13:27:14 SkyScan query 13:27:15 SkyScan query done: ret=0 az=40.995<-2733 ze=72.45<-7170 Statuses=0008 0009 13:27:15 Msec=3000 True Az=40.995 Ze=72.45 Az status=0008 Ze status=0009 13:27:15 Check angles 13:27:15 SkyScan query 13:27:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.065<-8529 Statuses=0008 0009 13:27:15 Msec=3750 True Az=40.995 Ze=52.065 Az status=0008 Ze status=0009 13:27:16 Check angles 13:27:16 SkyScan query 13:27:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:27:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:27:16 Message to Master queued w/err=0: serial=275961 error=0 13:27:21 Received message from Master: op=Filter serial=275962 13:27:21 Color wheel filter change from 0 to 0 13:27:21 FLIGetFilterPos err=0 currentPosition=0 13:27:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:21 Filter is already there-color wheel unchanged 13:27:21 Received message from Master: op=Shutter serial=275963 13:27:21 Shutter LASER close 13:27:22 Received message from Camera: op=State serial=275965 13:27:22 GetSingleValue result=40 Value=cccccccc 13:27:22 SkyScan query 13:27:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:27:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:22 Parameters OK 13:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:22 Set A/D data flow result=40 13:27:22 Set A/D channel type result=40 13:27:22 Set A/D encoding result=40 13:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:22 Set channel filter=0.000000e+000 result=40 13:27:22 Config A/D Result=40 13:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:22 Get A/D filter: -9.255963e+061 result=40 13:27:22 Get A/D value=-858993460 result=40 13:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:22 Parameters OK 13:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:22 Set A/D data flow result=40 13:27:22 Set A/D channel type result=40 13:27:22 Set A/D encoding result=40 13:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:22 Set channel filter=0.000000e+000 result=40 13:27:22 Config A/D Result=40 13:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:22 Get A/D filter: -9.255963e+061 result=40 13:27:22 Get A/D value=-858993460 result=40 13:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:22 Aux= 13:27:22 Message to Camera, serial 275965 queued 13:27:58 Received message from Master: op=PointingHead serial=275977 13:27:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:27:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:27:58 Point started: ret=0 13:27:58 point_skyscan result=0 13:27:59 Check angles 13:27:59 SkyScan query 13:28:00 SkyScan query done: ret=0 az=63.915<-4261 ze=66.54<-7564 Statuses=0009 0008 13:28:00 Msec=0 True Az=63.915 Ze=66.54 Az status=0009 Ze status=0008 13:28:00 Check angles 13:28:00 SkyScan query 13:28:00 SkyScan query done: ret=0 az=81.78<-5452 ze=66.51<-7566 Statuses=0009 0008 13:28:00 Msec=750 True Az=81.78 Ze=66.51 Az status=0009 Ze status=0008 13:28:01 Check angles 13:28:01 SkyScan query 13:28:01 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 13:28:01 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 13:28:01 Check angles 13:28:01 SkyScan query 13:28:02 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 13:28:02 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 13:28:02 Check angles 13:28:02 SkyScan query 13:28:03 SkyScan query done: ret=0 az=134.505<-8967 ze=66.495<-7567 Statuses=0009 0008 13:28:03 Msec=3000 True Az=134.505 Ze=66.495 Az status=0009 Ze status=0008 13:28:03 Check angles 13:28:03 SkyScan query 13:28:04 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 13:28:04 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 13:28:04 Check angles 13:28:04 SkyScan query 13:28:04 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:28:04 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:28:04 Message to Master queued w/err=0: serial=275977 error=0 13:28:09 Received message from Master: op=Filter serial=275978 13:28:09 Color wheel filter change from 0 to 0 13:28:09 FLIGetFilterPos err=0 currentPosition=0 13:28:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:09 Filter is already there-color wheel unchanged 13:28:09 Received message from Master: op=Shutter serial=275979 13:28:09 Shutter LASER close 13:28:09 Received message from Camera: op=State serial=275981 13:28:09 GetSingleValue result=40 Value=cccccccc 13:28:09 SkyScan query 13:28:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:28:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:10 Parameters OK 13:28:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:10 Set A/D data flow result=40 13:28:10 Set A/D channel type result=40 13:28:10 Set A/D encoding result=40 13:28:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:10 Set channel filter=0.000000e+000 result=40 13:28:10 Config A/D Result=40 13:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:10 Get A/D filter: -9.255963e+061 result=40 13:28:10 Get A/D value=-858993460 result=40 13:28:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:10 Parameters OK 13:28:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:10 Set A/D data flow result=40 13:28:10 Set A/D channel type result=40 13:28:10 Set A/D encoding result=40 13:28:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:10 Set channel filter=0.000000e+000 result=40 13:28:10 Config A/D Result=40 13:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:10 Get A/D filter: -9.255963e+061 result=40 13:28:10 Get A/D value=-858993460 result=40 13:28:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:10 Aux= 13:28:10 Message to Camera, serial 275981 queued 13:28:47 Received message from Master: op=PointingHead serial=275994 13:28:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:28:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:28:47 Point started: ret=0 13:28:47 point_skyscan result=0 13:28:48 Check angles 13:28:48 SkyScan query 13:28:49 SkyScan query done: ret=0 az=135.15<-9010 ze=36.885<-9541 Statuses=0009 0009 13:28:49 Msec=0 True Az=135.15 Ze=36.885 Az status=0009 Ze status=0009 13:28:49 Check angles 13:28:49 SkyScan query 13:28:49 SkyScan query done: ret=0 az=117.525<-7835 ze=15.915<-10939 Statuses=0009 0009 13:28:49 Msec=750 True Az=117.525 Ze=15.915 Az status=0009 Ze status=0009 13:28:49 Check angles 13:28:49 SkyScan query 13:28:50 SkyScan query done: ret=0 az=100.275<-6685 ze=-4.995<-12333 Statuses=0009 0009 13:28:50 Msec=1500 True Az=100.275 Ze=-4.995 Az status=0009 Ze status=0009 13:28:50 Check angles 13:28:50 SkyScan query 13:28:51 SkyScan query done: ret=0 az=82.77<-5518 ze=-25.995<-13733 Statuses=0009 0009 13:28:51 Msec=2250 True Az=82.77 Ze=-25.995 Az status=0009 Ze status=0009 13:28:51 Check angles 13:28:51 SkyScan query 13:28:52 SkyScan query done: ret=0 az=65.28<-4352 ze=-38.58<-14572 Statuses=0009 0008 13:28:52 Msec=3000 True Az=65.28 Ze=-38.58 Az status=0009 Ze status=0008 13:28:52 Check angles 13:28:52 SkyScan query 13:28:52 SkyScan query done: ret=0 az=47.835<-3189 ze=-38.52<-14568 Statuses=0009 0008 13:28:52 Msec=3750 True Az=47.835 Ze=-38.52 Az status=0009 Ze status=0008 13:28:52 Check angles 13:28:52 SkyScan query 13:28:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:28:53 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:28:53 Message to Master queued w/err=0: serial=275994 error=0 13:28:58 Received message from Master: op=Filter serial=275995 13:28:58 Color wheel filter change from 0 to 0 13:28:58 FLIGetFilterPos err=0 currentPosition=0 13:28:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:58 Filter is already there-color wheel unchanged 13:28:58 Received message from Master: op=Shutter serial=275996 13:28:58 Shutter LASER close 13:28:58 Received message from Camera: op=State serial=275998 13:28:58 GetSingleValue result=40 Value=cccccccc 13:28:58 SkyScan query 13:28:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:28:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:59 Parameters OK 13:28:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:59 Set A/D data flow result=40 13:28:59 Set A/D channel type result=40 13:28:59 Set A/D encoding result=40 13:28:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:59 Set channel filter=0.000000e+000 result=40 13:28:59 Config A/D Result=40 13:28:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:59 Get A/D filter: -9.255963e+061 result=40 13:28:59 Get A/D value=-858993460 result=40 13:28:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:59 Parameters OK 13:28:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:59 Set A/D data flow result=40 13:28:59 Set A/D channel type result=40 13:28:59 Set A/D encoding result=40 13:28:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:59 Set channel filter=0.000000e+000 result=40 13:28:59 Config A/D Result=40 13:28:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:59 Get A/D filter: -9.255963e+061 result=40 13:28:59 Get A/D value=-858993460 result=40 13:28:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:59 Aux= 13:28:59 Message to Camera, serial 275998 queued 13:29:36 Received message from Master: op=PointingHead serial=276011 13:29:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:29:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:29:36 Point started: ret=0 13:29:36 point_skyscan result=0 13:29:37 Check angles 13:29:37 SkyScan query 13:29:37 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.475<-16565 Statuses=0009 0009 13:29:37 Msec=0 True Az=64.2 Ze=-68.475 Az status=0009 Ze status=0009 13:29:38 Check angles 13:29:38 SkyScan query 13:29:38 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.475<-17965 Statuses=0009 0009 13:29:38 Msec=750 True Az=81.63 Ze=-89.475 Az status=0009 Ze status=0009 13:29:38 Check angles 13:29:38 SkyScan query 13:29:39 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.4<-19360 Statuses=0009 0009 13:29:39 Msec=1500 True Az=99.15 Ze=-110.4 Az status=0009 Ze status=0009 13:29:39 Check angles 13:29:39 SkyScan query 13:29:40 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.31<-20754 Statuses=0009 0009 13:29:40 Msec=2250 True Az=116.55 Ze=-131.31 Az status=0009 Ze status=0009 13:29:40 Check angles 13:29:40 SkyScan query 13:29:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 13:29:40 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 13:29:41 Check angles 13:29:41 SkyScan query 13:29:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:29:41 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:29:41 Message to Master queued w/err=0: serial=276011 error=0 13:29:46 Received message from Master: op=Filter serial=276012 13:29:46 Color wheel filter change from 0 to 0 13:29:46 FLIGetFilterPos err=0 currentPosition=0 13:29:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:46 Filter is already there-color wheel unchanged 13:29:46 Received message from Master: op=Shutter serial=276013 13:29:46 Shutter LASER close 13:29:46 Received message from Camera: op=State serial=276015 13:29:46 GetSingleValue result=40 Value=cccccccc 13:29:46 SkyScan query 13:29:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:29:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:47 Parameters OK 13:29:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:47 Set A/D data flow result=40 13:29:47 Set A/D channel type result=40 13:29:47 Set A/D encoding result=40 13:29:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:47 Set channel filter=0.000000e+000 result=40 13:29:47 Config A/D Result=40 13:29:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:47 Get A/D filter: -9.255963e+061 result=40 13:29:47 Get A/D value=-858993460 result=40 13:29:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:47 Parameters OK 13:29:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:47 Set A/D data flow result=40 13:29:47 Set A/D channel type result=40 13:29:47 Set A/D encoding result=40 13:29:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:47 Set channel filter=0.000000e+000 result=40 13:29:47 Config A/D Result=40 13:29:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:47 Get A/D filter: -9.255963e+061 result=40 13:29:47 Get A/D value=-858993460 result=40 13:29:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:47 Aux= 13:29:47 Message to Camera, serial 276015 queued 13:30:23 Received message from Master: op=PointingHead serial=276027 13:30:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:30:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:30:23 Point started: ret=0 13:30:23 point_skyscan result=0 13:30:24 Check angles 13:30:24 SkyScan query 13:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.15<-23410 Statuses=0009 0009 13:30:25 Msec=0 True Az=112.995 Ze=-171.15 Az status=0009 Ze status=0009 13:30:25 Check angles 13:30:25 SkyScan query 13:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:30:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:30:25 Message to Master queued w/err=0: serial=276027 error=0 13:30:30 Received message from Master: op=Filter serial=276028 13:30:30 Color wheel filter change from 0 to 0 13:30:30 FLIGetFilterPos err=0 currentPosition=0 13:30:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:30 Filter is already there-color wheel unchanged 13:30:30 Received message from Master: op=Shutter serial=276029 13:30:30 Shutter LASER open 13:30:31 Received message from Camera: op=State serial=276031 13:30:31 GetSingleValue result=40 Value=cccccccc 13:30:31 SkyScan query 13:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:30:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:31 Parameters OK 13:30:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:31 Set A/D data flow result=40 13:30:31 Set A/D channel type result=40 13:30:31 Set A/D encoding result=40 13:30:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:31 Set channel filter=0.000000e+000 result=40 13:30:31 Config A/D Result=40 13:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:31 Get A/D filter: -9.255963e+061 result=40 13:30:31 Get A/D value=-858993460 result=40 13:30:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:31 Parameters OK 13:30:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:31 Set A/D data flow result=40 13:30:31 Set A/D channel type result=40 13:30:31 Set A/D encoding result=40 13:30:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:31 Set channel filter=0.000000e+000 result=40 13:30:31 Config A/D Result=40 13:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:31 Get A/D filter: -9.255963e+061 result=40 13:30:31 Get A/D value=-858993460 result=40 13:30:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:31 Aux= 13:30:31 Message to Camera, serial 276031 queued 13:30:40 Received message from Master: op=Shutter serial=276041 13:30:40 Shutter LASER close 13:30:40 Received message from Master: op=PointingHead serial=276045 13:30:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:30:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:30:41 Point started: ret=0 13:30:41 point_skyscan result=0 13:30:41 Check angles 13:30:41 SkyScan query 13:30:42 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.175<-21545 Statuses=0009 0009 13:30:42 Msec=0 True Az=135.975 Ze=-143.175 Az status=0009 Ze status=0009 13:30:42 Check angles 13:30:42 SkyScan query 13:30:43 SkyScan query done: ret=0 az=153.465<-10231 ze=-122.28<-20152 Statuses=0009 0009 13:30:43 Msec=750 True Az=153.465 Ze=-122.28 Az status=0009 Ze status=0009 13:30:43 Check angles 13:30:43 SkyScan query 13:30:44 SkyScan query done: ret=0 az=170.925<-11395 ze=-101.385<-18759 Statuses=0009 0009 13:30:44 Msec=1500 True Az=170.925 Ze=-101.385 Az status=0009 Ze status=0009 13:30:44 Check angles 13:30:44 SkyScan query 13:30:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.415<-17361 Statuses=0008 0009 13:30:44 Msec=2250 True Az=175.995 Ze=-80.415 Az status=0008 Ze status=0009 13:30:44 Check angles 13:30:44 SkyScan query 13:30:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.475<-15965 Statuses=0008 0009 13:30:45 Msec=3000 True Az=175.995 Ze=-59.475 Az status=0008 Ze status=0009 13:30:45 Check angles 13:30:45 SkyScan query 13:30:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:30:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:30:46 Message to Master queued w/err=0: serial=276045 error=0 13:30:51 Received message from Master: op=Filter serial=276046 13:30:51 Color wheel filter change from 0 to 0 13:30:51 FLIGetFilterPos err=0 currentPosition=0 13:30:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:51 Filter is already there-color wheel unchanged 13:30:51 Received message from Master: op=Shutter serial=276047 13:30:51 Shutter LASER close 13:30:51 Received message from Camera: op=State serial=276049 13:30:51 GetSingleValue result=40 Value=cccccccc 13:30:51 SkyScan query 13:30:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:30:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:52 Parameters OK 13:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:52 Set A/D data flow result=40 13:30:52 Set A/D channel type result=40 13:30:52 Set A/D encoding result=40 13:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:52 Set channel filter=0.000000e+000 result=40 13:30:52 Config A/D Result=40 13:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:52 Get A/D filter: -9.255963e+061 result=40 13:30:52 Get A/D value=-858993460 result=40 13:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:52 Parameters OK 13:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:52 Set A/D data flow result=40 13:30:52 Set A/D channel type result=40 13:30:52 Set A/D encoding result=40 13:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:52 Set channel filter=0.000000e+000 result=40 13:30:52 Config A/D Result=40 13:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:52 Get A/D filter: -9.255963e+061 result=40 13:30:52 Get A/D value=-858993460 result=40 13:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:52 Aux= 13:30:52 Message to Camera, serial 276049 queued 13:31:28 Received message from Master: op=PointingHead serial=276062 13:31:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:31:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:31:29 Point started: ret=0 13:31:29 point_skyscan result=0 13:31:30 Check angles 13:31:30 SkyScan query 13:31:30 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.84<-13456 Statuses=0009 0009 13:31:30 Msec=0 True Az=152.955 Ze=-21.84 Az status=0009 Ze status=0009 13:31:30 Check angles 13:31:30 SkyScan query 13:31:31 SkyScan query done: ret=0 az=135.24<-9016 ze=-0.405<-12027 Statuses=0009 0009 13:31:31 Msec=750 True Az=135.24 Ze=-0.405 Az status=0009 Ze status=0009 13:31:31 Check angles 13:31:31 SkyScan query 13:31:32 SkyScan query done: ret=0 az=117.615<-7841 ze=20.55<-10630 Statuses=0009 0009 13:31:32 Msec=1500 True Az=117.615 Ze=20.55 Az status=0009 Ze status=0009 13:31:32 Check angles 13:31:32 SkyScan query 13:31:32 SkyScan query done: ret=0 az=99.945<-6663 ze=41.925<-9205 Statuses=0009 0009 13:31:32 Msec=2250 True Az=99.945 Ze=41.925 Az status=0009 Ze status=0009 13:31:33 Check angles 13:31:33 SkyScan query 13:31:33 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 13:31:33 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 13:31:33 Check angles 13:31:33 SkyScan query 13:31:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:31:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:31:34 Message to Master queued w/err=0: serial=276062 error=0 13:31:39 Received message from Master: op=Filter serial=276063 13:31:39 Color wheel filter change from 0 to 0 13:31:39 FLIGetFilterPos err=0 currentPosition=0 13:31:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:39 Filter is already there-color wheel unchanged 13:31:39 Received message from Master: op=Shutter serial=276064 13:31:39 Shutter LASER close 13:31:39 Received message from Camera: op=State serial=276066 13:31:39 GetSingleValue result=40 Value=cccccccc 13:31:39 SkyScan query 13:31:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:31:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:40 Parameters OK 13:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:40 Set A/D data flow result=40 13:31:40 Set A/D channel type result=40 13:31:40 Set A/D encoding result=40 13:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:40 Set channel filter=0.000000e+000 result=40 13:31:40 Config A/D Result=40 13:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:40 Get A/D filter: -9.255963e+061 result=40 13:31:40 Get A/D value=-858993460 result=40 13:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:40 Parameters OK 13:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:40 Set A/D data flow result=40 13:31:40 Set A/D channel type result=40 13:31:40 Set A/D encoding result=40 13:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:40 Set channel filter=0.000000e+000 result=40 13:31:40 Config A/D Result=40 13:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:40 Get A/D filter: -9.255963e+061 result=40 13:31:40 Get A/D value=-858993460 result=40 13:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:40 Aux= 13:31:40 Message to Camera, serial 276066 queued 13:32:17 Received message from Master: op=PointingHead serial=276079 13:32:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:32:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:32:17 Point started: ret=0 13:32:17 point_skyscan result=0 13:32:18 Check angles 13:32:18 SkyScan query 13:32:18 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 13:32:18 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 13:32:18 Check angles 13:32:18 SkyScan query 13:32:19 SkyScan query done: ret=0 az=126.78<-8452 ze=38.505<-9433 Statuses=0009 0008 13:32:19 Msec=750 True Az=126.78 Ze=38.505 Az status=0009 Ze status=0008 13:32:19 Check angles 13:32:19 SkyScan query 13:32:20 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 13:32:20 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 13:32:20 Check angles 13:32:20 SkyScan query 13:32:21 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 13:32:21 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 13:32:21 Check angles 13:32:21 SkyScan query 13:32:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:32:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:32:21 Check angles 13:32:21 SkyScan query 13:32:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:32:22 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:32:22 Message to Master queued w/err=0: serial=276079 error=0 13:32:27 Received message from Master: op=Filter serial=276080 13:32:27 Color wheel filter change from 0 to 0 13:32:27 FLIGetFilterPos err=0 currentPosition=0 13:32:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:27 Filter is already there-color wheel unchanged 13:32:27 Received message from Master: op=Shutter serial=276081 13:32:27 Shutter LASER close 13:32:27 Received message from Camera: op=State serial=276083 13:32:27 GetSingleValue result=40 Value=cccccccc 13:32:27 SkyScan query 13:32:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:32:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:28 Parameters OK 13:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:28 Set A/D data flow result=40 13:32:28 Set A/D channel type result=40 13:32:28 Set A/D encoding result=40 13:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:28 Set channel filter=0.000000e+000 result=40 13:32:28 Config A/D Result=40 13:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:28 Get A/D filter: -9.255963e+061 result=40 13:32:28 Get A/D value=-858993460 result=40 13:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:28 Parameters OK 13:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:28 Set A/D data flow result=40 13:32:28 Set A/D channel type result=40 13:32:28 Set A/D encoding result=40 13:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:28 Set channel filter=0.000000e+000 result=40 13:32:28 Config A/D Result=40 13:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:28 Get A/D filter: -9.255963e+061 result=40 13:32:28 Get A/D value=-858993460 result=40 13:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:28 Aux= 13:32:28 Message to Camera, serial 276083 queued 13:33:05 Received message from Master: op=PointingHead serial=276096 13:33:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:33:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:33:05 Point started: ret=0 13:33:05 point_skyscan result=0 13:33:06 Check angles 13:33:06 SkyScan query 13:33:06 SkyScan query done: ret=0 az=152.895<-10193 ze=8.775<-11415 Statuses=0009 0009 13:33:06 Msec=0 True Az=152.895 Ze=8.775 Az status=0009 Ze status=0009 13:33:06 Check angles 13:33:06 SkyScan query 13:33:07 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.615<-12841 Statuses=0009 0009 13:33:07 Msec=750 True Az=135.09 Ze=-12.615 Az status=0009 Ze status=0009 13:33:07 Check angles 13:33:07 SkyScan query 13:33:08 SkyScan query done: ret=0 az=117.3<-7820 ze=-34.125<-14275 Statuses=0009 0009 13:33:08 Msec=1500 True Az=117.3 Ze=-34.125 Az status=0009 Ze status=0009 13:33:08 Check angles 13:33:08 SkyScan query 13:33:09 SkyScan query done: ret=0 az=99.465<-6631 ze=-51.57<-15438 Statuses=0009 0009 13:33:09 Msec=2250 True Az=99.465 Ze=-51.57 Az status=0009 Ze status=0009 13:33:09 Check angles 13:33:09 SkyScan query 13:33:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:33:09 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:33:10 Check angles 13:33:10 SkyScan query 13:33:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:33:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:33:10 Message to Master queued w/err=0: serial=276096 error=0 13:33:15 Received message from Master: op=Filter serial=276097 13:33:15 Color wheel filter change from 0 to 0 13:33:15 FLIGetFilterPos err=0 currentPosition=0 13:33:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:15 Filter is already there-color wheel unchanged 13:33:15 Received message from Master: op=Shutter serial=276098 13:33:15 Shutter LASER close 13:33:15 Received message from Camera: op=State serial=276100 13:33:15 GetSingleValue result=40 Value=cccccccc 13:33:15 SkyScan query 13:33:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:33:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:16 Parameters OK 13:33:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:16 Set A/D data flow result=40 13:33:16 Set A/D channel type result=40 13:33:16 Set A/D encoding result=40 13:33:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:16 Set channel filter=0.000000e+000 result=40 13:33:16 Config A/D Result=40 13:33:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:16 Get A/D filter: -9.255963e+061 result=40 13:33:16 Get A/D value=-858993460 result=40 13:33:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:16 Parameters OK 13:33:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:16 Set A/D data flow result=40 13:33:16 Set A/D channel type result=40 13:33:16 Set A/D encoding result=40 13:33:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:16 Set channel filter=0.000000e+000 result=40 13:33:16 Config A/D Result=40 13:33:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:16 Get A/D filter: -9.255963e+061 result=40 13:33:16 Get A/D value=-858993460 result=40 13:33:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:16 Aux= 13:33:16 Message to Camera, serial 276100 queued 13:33:53 Received message from Master: op=PointingHead serial=276113 13:33:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:33:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:33:53 Point started: ret=0 13:33:53 point_skyscan result=0 13:33:54 Check angles 13:33:54 SkyScan query 13:33:54 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.39<-17426 Statuses=0009 0009 13:33:54 Msec=0 True Az=109.17 Ze=-81.39 Az status=0009 Ze status=0009 13:33:55 Check angles 13:33:55 SkyScan query 13:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.765<-18851 Statuses=0008 0009 13:33:55 Msec=750 True Az=112.995 Ze=-102.765 Az status=0008 Ze status=0009 13:33:55 Check angles 13:33:55 SkyScan query 13:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.14<-20276 Statuses=0008 0009 13:33:56 Msec=1500 True Az=112.995 Ze=-124.14 Az status=0008 Ze status=0009 13:33:56 Check angles 13:33:56 SkyScan query 13:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.08<-21672 Statuses=0008 0009 13:33:57 Msec=2250 True Az=112.995 Ze=-145.08 Az status=0008 Ze status=0009 13:33:57 Check angles 13:33:57 SkyScan query 13:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.485<-23099 Statuses=0008 0009 13:33:57 Msec=3000 True Az=112.995 Ze=-166.485 Az status=0008 Ze status=0009 13:33:58 Check angles 13:33:58 SkyScan query 13:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:33:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:33:58 Message to Master queued w/err=0: serial=276113 error=0 13:34:03 Received message from Master: op=Filter serial=276114 13:34:03 Color wheel filter change from 0 to 0 13:34:03 FLIGetFilterPos err=0 currentPosition=0 13:34:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:03 Filter is already there-color wheel unchanged 13:34:03 Received message from Master: op=Shutter serial=276115 13:34:03 Shutter LASER open 13:34:04 Received message from Camera: op=State serial=276117 13:34:04 GetSingleValue result=40 Value=cccccccc 13:34:04 SkyScan query 13:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:34:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:04 Parameters OK 13:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:04 Set A/D data flow result=40 13:34:04 Set A/D channel type result=40 13:34:04 Set A/D encoding result=40 13:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:04 Set channel filter=0.000000e+000 result=40 13:34:04 Config A/D Result=40 13:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:04 Get A/D filter: -9.255963e+061 result=40 13:34:04 Get A/D value=-858993460 result=40 13:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:04 Parameters OK 13:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:04 Set A/D data flow result=40 13:34:04 Set A/D channel type result=40 13:34:04 Set A/D encoding result=40 13:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:04 Set channel filter=0.000000e+000 result=40 13:34:04 Config A/D Result=40 13:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:04 Get A/D filter: -9.255963e+061 result=40 13:34:04 Get A/D value=-858993460 result=40 13:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:04 Aux= 13:34:04 Message to Camera, serial 276117 queued 13:34:13 Received message from Master: op=Shutter serial=276127 13:34:13 Shutter LASER close 13:34:13 Received message from Master: op=PointingHead serial=276131 13:34:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:34:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:34:13 Point started: ret=0 13:34:13 point_skyscan result=0 13:34:14 Check angles 13:34:14 SkyScan query 13:34:15 SkyScan query done: ret=0 az=90.165<-6011 ze=157.455<-1503 Statuses=0009 0009 13:34:15 Msec=0 True Az=90.165 Ze=157.455 Az status=0009 Ze status=0009 13:34:15 Check angles 13:34:15 SkyScan query 13:34:16 SkyScan query done: ret=0 az=72.69<-4846 ze=136.5<-2900 Statuses=0009 0009 13:34:16 Msec=750 True Az=72.69 Ze=136.5 Az status=0009 Ze status=0009 13:34:16 Check angles 13:34:16 SkyScan query 13:34:16 SkyScan query done: ret=0 az=55.245<-3683 ze=115.575<-4295 Statuses=0009 0009 13:34:16 Msec=1500 True Az=55.245 Ze=115.575 Az status=0009 Ze status=0009 13:34:16 Check angles 13:34:16 SkyScan query 13:34:17 SkyScan query done: ret=0 az=41.025<-2735 ze=94.47<-5702 Statuses=0009 0009 13:34:17 Msec=2250 True Az=41.025 Ze=94.47 Az status=0009 Ze status=0009 13:34:17 Check angles 13:34:17 SkyScan query 13:34:18 SkyScan query done: ret=0 az=40.995<-2733 ze=73.665<-7089 Statuses=0008 0009 13:34:18 Msec=3000 True Az=40.995 Ze=73.665 Az status=0008 Ze status=0009 13:34:18 Check angles 13:34:18 SkyScan query 13:34:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.98<-8468 Statuses=0008 0009 13:34:19 Msec=3750 True Az=40.995 Ze=52.98 Az status=0008 Ze status=0009 13:34:19 Check angles 13:34:19 SkyScan query 13:34:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:34:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:34:19 Message to Master queued w/err=0: serial=276131 error=0 13:34:24 Received message from Master: op=Filter serial=276132 13:34:24 Color wheel filter change from 0 to 0 13:34:24 FLIGetFilterPos err=0 currentPosition=0 13:34:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:24 Filter is already there-color wheel unchanged 13:34:24 Received message from Master: op=Shutter serial=276133 13:34:24 Shutter LASER close 13:34:25 Received message from Camera: op=State serial=276135 13:34:25 GetSingleValue result=40 Value=cccccccc 13:34:25 SkyScan query 13:34:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:34:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:25 Parameters OK 13:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:25 Set A/D data flow result=40 13:34:25 Set A/D channel type result=40 13:34:25 Set A/D encoding result=40 13:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:25 Set channel filter=0.000000e+000 result=40 13:34:25 Config A/D Result=40 13:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:25 Get A/D filter: -9.255963e+061 result=40 13:34:25 Get A/D value=-858993460 result=40 13:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:25 Parameters OK 13:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:25 Set A/D data flow result=40 13:34:25 Set A/D channel type result=40 13:34:25 Set A/D encoding result=40 13:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:25 Set channel filter=0.000000e+000 result=40 13:34:25 Config A/D Result=40 13:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:25 Get A/D filter: -9.255963e+061 result=40 13:34:25 Get A/D value=-858993460 result=40 13:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:25 Aux= 13:34:25 Message to Camera, serial 276135 queued 13:35:02 Received message from Master: op=PointingHead serial=276148 13:35:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:35:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:35:02 Point started: ret=0 13:35:02 point_skyscan result=0 13:35:03 Check angles 13:35:03 SkyScan query 13:35:04 SkyScan query done: ret=0 az=63.9<-4260 ze=66.54<-7564 Statuses=0009 0008 13:35:04 Msec=0 True Az=63.9 Ze=66.54 Az status=0009 Ze status=0008 13:35:04 Check angles 13:35:04 SkyScan query 13:35:04 SkyScan query done: ret=0 az=81.72<-5448 ze=66.51<-7566 Statuses=0009 0008 13:35:04 Msec=750 True Az=81.72 Ze=66.51 Az status=0009 Ze status=0008 13:35:05 Check angles 13:35:05 SkyScan query 13:35:05 SkyScan query done: ret=0 az=99.195<-6613 ze=66.495<-7567 Statuses=0009 0008 13:35:05 Msec=1500 True Az=99.195 Ze=66.495 Az status=0009 Ze status=0008 13:35:05 Check angles 13:35:05 SkyScan query 13:35:06 SkyScan query done: ret=0 az=116.715<-7781 ze=66.495<-7567 Statuses=0009 0008 13:35:06 Msec=2250 True Az=116.715 Ze=66.495 Az status=0009 Ze status=0008 13:35:06 Check angles 13:35:06 SkyScan query 13:35:07 SkyScan query done: ret=0 az=134.175<-8945 ze=66.495<-7567 Statuses=0009 0008 13:35:07 Msec=3000 True Az=134.175 Ze=66.495 Az status=0009 Ze status=0008 13:35:07 Check angles 13:35:07 SkyScan query 13:35:07 SkyScan query done: ret=0 az=151.545<-10103 ze=66.495<-7567 Statuses=0009 0008 13:35:07 Msec=3750 True Az=151.545 Ze=66.495 Az status=0009 Ze status=0008 13:35:08 Check angles 13:35:08 SkyScan query 13:35:08 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:35:08 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:35:08 Message to Master queued w/err=0: serial=276148 error=0 13:35:13 Received message from Master: op=Filter serial=276149 13:35:13 Color wheel filter change from 0 to 0 13:35:13 FLIGetFilterPos err=0 currentPosition=0 13:35:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:13 Filter is already there-color wheel unchanged 13:35:13 Received message from Master: op=Shutter serial=276150 13:35:13 Shutter LASER close 13:35:13 Received message from Camera: op=State serial=276152 13:35:13 GetSingleValue result=40 Value=cccccccc 13:35:13 SkyScan query 13:35:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:35:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:14 Parameters OK 13:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:14 Set A/D data flow result=40 13:35:14 Set A/D channel type result=40 13:35:14 Set A/D encoding result=40 13:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:14 Set channel filter=0.000000e+000 result=40 13:35:14 Config A/D Result=40 13:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:14 Get A/D filter: -9.255963e+061 result=40 13:35:14 Get A/D value=-858993460 result=40 13:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:14 Parameters OK 13:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:14 Set A/D data flow result=40 13:35:14 Set A/D channel type result=40 13:35:14 Set A/D encoding result=40 13:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:14 Set channel filter=0.000000e+000 result=40 13:35:14 Config A/D Result=40 13:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:14 Get A/D filter: -9.255963e+061 result=40 13:35:14 Get A/D value=-858993460 result=40 13:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:14 Aux= 13:35:14 Message to Camera, serial 276152 queued 13:35:51 Received message from Master: op=PointingHead serial=276165 13:35:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:35:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:35:51 Point started: ret=0 13:35:51 point_skyscan result=0 13:35:52 Check angles 13:35:52 SkyScan query 13:35:53 SkyScan query done: ret=0 az=134.565<-8971 ze=36.21<-9586 Statuses=0009 0009 13:35:53 Msec=0 True Az=134.565 Ze=36.21 Az status=0009 Ze status=0009 [UTC 2018-12-19 13:35:53] 13:35:53 Check angles 13:35:53 SkyScan query 13:35:53 SkyScan query done: ret=0 az=116.685<-7779 ze=14.775<-11015 Statuses=0009 0009 13:35:53 Msec=750 True Az=116.685 Ze=14.775 Az status=0009 Ze status=0009 13:35:53 Check angles 13:35:53 SkyScan query 13:35:54 SkyScan query done: ret=0 az=99.15<-6610 ze=-6.21<-12414 Statuses=0009 0009 13:35:54 Msec=1500 True Az=99.15 Ze=-6.21 Az status=0009 Ze status=0009 13:35:54 Check angles 13:35:54 SkyScan query 13:35:55 SkyScan query done: ret=0 az=81.825<-5455 ze=-27.165<-13811 Statuses=0009 0009 13:35:55 Msec=2250 True Az=81.825 Ze=-27.165 Az status=0009 Ze status=0009 13:35:55 Check angles 13:35:55 SkyScan query 13:35:56 SkyScan query done: ret=0 az=63.96<-4264 ze=-38.58<-14572 Statuses=0009 0008 13:35:56 Msec=3000 True Az=63.96 Ze=-38.58 Az status=0009 Ze status=0008 13:35:56 Check angles 13:35:56 SkyScan query 13:35:56 SkyScan query done: ret=0 az=46.53<-3102 ze=-38.52<-14568 Statuses=0009 0008 13:35:56 Msec=3750 True Az=46.53 Ze=-38.52 Az status=0009 Ze status=0008 13:35:56 Check angles 13:35:56 SkyScan query 13:35:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:35:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:35:57 Message to Master queued w/err=0: serial=276165 error=0 13:36:02 Received message from Master: op=Filter serial=276166 13:36:02 Color wheel filter change from 0 to 0 13:36:02 FLIGetFilterPos err=0 currentPosition=0 13:36:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:02 Filter is already there-color wheel unchanged 13:36:02 Received message from Master: op=Shutter serial=276167 13:36:02 Shutter LASER close 13:36:02 Received message from Camera: op=State serial=276169 13:36:02 GetSingleValue result=40 Value=cccccccc 13:36:02 SkyScan query 13:36:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:36:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:03 Parameters OK 13:36:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:03 Set A/D data flow result=40 13:36:03 Set A/D channel type result=40 13:36:03 Set A/D encoding result=40 13:36:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:03 Set channel filter=0.000000e+000 result=40 13:36:03 Config A/D Result=40 13:36:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:03 Get A/D filter: -9.255963e+061 result=40 13:36:03 Get A/D value=-858993460 result=40 13:36:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:03 Parameters OK 13:36:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:03 Set A/D data flow result=40 13:36:03 Set A/D channel type result=40 13:36:03 Set A/D encoding result=40 13:36:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:03 Set channel filter=0.000000e+000 result=40 13:36:03 Config A/D Result=40 13:36:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:03 Get A/D filter: -9.255963e+061 result=40 13:36:03 Get A/D value=-858993460 result=40 13:36:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:03 Aux= 13:36:03 Message to Camera, serial 276169 queued 13:36:40 Received message from Master: op=PointingHead serial=276182 13:36:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:36:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:36:40 Point started: ret=0 13:36:40 point_skyscan result=0 13:36:41 Check angles 13:36:41 SkyScan query 13:36:41 SkyScan query done: ret=0 az=63.87<-4258 ze=-67.995<-16533 Statuses=0009 0009 13:36:41 Msec=0 True Az=63.87 Ze=-67.995 Az status=0009 Ze status=0009 13:36:42 Check angles 13:36:42 SkyScan query 13:36:42 SkyScan query done: ret=0 az=81.315<-5421 ze=-88.95<-17930 Statuses=0009 0009 13:36:42 Msec=750 True Az=81.315 Ze=-88.95 Az status=0009 Ze status=0009 13:36:42 Check angles 13:36:42 SkyScan query 13:36:43 SkyScan query done: ret=0 az=98.79<-6586 ze=-109.905<-19327 Statuses=0009 0009 13:36:43 Msec=1500 True Az=98.79 Ze=-109.905 Az status=0009 Ze status=0009 13:36:43 Check angles 13:36:43 SkyScan query 13:36:44 SkyScan query done: ret=0 az=116.58<-7772 ze=-131.295<-20753 Statuses=0009 0009 13:36:44 Msec=2250 True Az=116.58 Ze=-131.295 Az status=0009 Ze status=0009 13:36:44 Check angles 13:36:44 SkyScan query 13:36:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 13:36:44 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 13:36:45 Check angles 13:36:45 SkyScan query 13:36:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:36:45 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:36:45 Message to Master queued w/err=0: serial=276182 error=0 13:36:50 Received message from Master: op=Filter serial=276183 13:36:50 Color wheel filter change from 0 to 0 13:36:50 FLIGetFilterPos err=0 currentPosition=0 13:36:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:50 Filter is already there-color wheel unchanged 13:36:50 Received message from Master: op=Shutter serial=276184 13:36:50 Shutter LASER close 13:36:50 Received message from Camera: op=State serial=276186 13:36:50 GetSingleValue result=40 Value=cccccccc 13:36:50 SkyScan query 13:36:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:36:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:51 Parameters OK 13:36:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:51 Set A/D data flow result=40 13:36:51 Set A/D channel type result=40 13:36:51 Set A/D encoding result=40 13:36:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:51 Set channel filter=0.000000e+000 result=40 13:36:51 Config A/D Result=40 13:36:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:51 Get A/D filter: -9.255963e+061 result=40 13:36:51 Get A/D value=-858993460 result=40 13:36:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:51 Parameters OK 13:36:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:51 Set A/D data flow result=40 13:36:51 Set A/D channel type result=40 13:36:51 Set A/D encoding result=40 13:36:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:51 Set channel filter=0.000000e+000 result=40 13:36:51 Config A/D Result=40 13:36:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:51 Get A/D filter: -9.255963e+061 result=40 13:36:51 Get A/D value=-858993460 result=40 13:36:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:51 Aux= 13:36:51 Message to Camera, serial 276186 queued 13:37:28 Received message from Master: op=PointingHead serial=276199 13:37:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:37:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:37:28 Point started: ret=0 13:37:28 point_skyscan result=0 13:37:29 Check angles 13:37:29 SkyScan query 13:37:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0009 0009 13:37:29 Msec=0 True Az=112.995 Ze=-170.895 Az status=0009 Ze status=0009 13:37:30 Check angles 13:37:30 SkyScan query 13:37:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:37:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:37:30 Message to Master queued w/err=0: serial=276199 error=0 13:37:35 Received message from Master: op=Filter serial=276200 13:37:35 Color wheel filter change from 0 to 0 13:37:35 FLIGetFilterPos err=0 currentPosition=0 13:37:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:35 Filter is already there-color wheel unchanged 13:37:35 Received message from Master: op=Shutter serial=276201 13:37:35 Shutter LASER open 13:37:36 Received message from Camera: op=State serial=276203 13:37:36 GetSingleValue result=40 Value=cccccccc 13:37:36 SkyScan query 13:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:37:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:36 Parameters OK 13:37:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:36 Set A/D data flow result=40 13:37:36 Set A/D channel type result=40 13:37:36 Set A/D encoding result=40 13:37:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:36 Set channel filter=0.000000e+000 result=40 13:37:36 Config A/D Result=40 13:37:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:36 Get A/D filter: -9.255963e+061 result=40 13:37:36 Get A/D value=-858993460 result=40 13:37:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:36 Parameters OK 13:37:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:36 Set A/D data flow result=40 13:37:36 Set A/D channel type result=40 13:37:36 Set A/D encoding result=40 13:37:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:36 Set channel filter=0.000000e+000 result=40 13:37:36 Config A/D Result=40 13:37:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:36 Get A/D filter: -9.255963e+061 result=40 13:37:36 Get A/D value=-858993460 result=40 13:37:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:36 Aux= 13:37:36 Message to Camera, serial 276203 queued 13:37:45 Received message from Master: op=Shutter serial=276213 13:37:45 Shutter LASER close 13:37:45 Received message from Master: op=PointingHead serial=276217 13:37:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:37:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:37:45 Point started: ret=0 13:37:45 point_skyscan result=0 13:37:46 Check angles 13:37:46 SkyScan query 13:37:47 SkyScan query done: ret=0 az=136.2<-9080 ze=-143.04<-21536 Statuses=0009 0009 13:37:47 Msec=0 True Az=136.2 Ze=-143.04 Az status=0009 Ze status=0009 13:37:47 Check angles 13:37:47 SkyScan query 13:37:48 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.1<-20140 Statuses=0009 0009 13:37:48 Msec=750 True Az=153.66 Ze=-122.1 Az status=0009 Ze status=0009 13:37:48 Check angles 13:37:48 SkyScan query 13:37:48 SkyScan query done: ret=0 az=171.15<-11410 ze=-101.145<-18743 Statuses=0009 0009 13:37:48 Msec=1500 True Az=171.15 Ze=-101.145 Az status=0009 Ze status=0009 13:37:48 Check angles 13:37:48 SkyScan query 13:37:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.22<-17348 Statuses=0008 0009 13:37:49 Msec=2250 True Az=175.995 Ze=-80.22 Az status=0008 Ze status=0009 13:37:49 Check angles 13:37:49 SkyScan query 13:37:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.22<-15948 Statuses=0008 0009 13:37:50 Msec=3000 True Az=175.995 Ze=-59.22 Az status=0008 Ze status=0009 13:37:50 Check angles 13:37:50 SkyScan query 13:37:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:37:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:37:51 Message to Master queued w/err=0: serial=276217 error=0 13:37:56 Received message from Master: op=Filter serial=276218 13:37:56 Color wheel filter change from 0 to 0 13:37:56 FLIGetFilterPos err=0 currentPosition=0 13:37:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:56 Filter is already there-color wheel unchanged 13:37:56 Received message from Master: op=Shutter serial=276219 13:37:56 Shutter LASER close 13:37:56 Received message from Camera: op=State serial=276221 13:37:56 GetSingleValue result=40 Value=cccccccc 13:37:56 SkyScan query 13:37:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:37:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:56 Parameters OK 13:37:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:56 Set A/D data flow result=40 13:37:56 Set A/D channel type result=40 13:37:56 Set A/D encoding result=40 13:37:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:56 Set channel filter=0.000000e+000 result=40 13:37:56 Config A/D Result=40 13:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:56 Get A/D filter: -9.255963e+061 result=40 13:37:56 Get A/D value=-858993460 result=40 13:37:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:56 Parameters OK 13:37:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:56 Set A/D data flow result=40 13:37:56 Set A/D channel type result=40 13:37:56 Set A/D encoding result=40 13:37:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:56 Set channel filter=0.000000e+000 result=40 13:37:56 Config A/D Result=40 13:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:56 Get A/D filter: -9.255963e+061 result=40 13:37:56 Get A/D value=-858993460 result=40 13:37:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:56 Aux= 13:37:56 Message to Camera, serial 276221 queued 13:38:33 Received message from Master: op=PointingHead serial=276234 13:38:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:38:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:38:34 Point started: ret=0 13:38:34 point_skyscan result=0 13:38:34 Check angles 13:38:34 SkyScan query 13:38:35 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.285<-13419 Statuses=0009 0009 13:38:35 Msec=0 True Az=152.73 Ze=-21.285 Az status=0009 Ze status=0009 13:38:35 Check angles 13:38:35 SkyScan query 13:38:36 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.45<-12030 Statuses=0009 0009 13:38:36 Msec=750 True Az=135.27 Ze=-0.45 Az status=0009 Ze status=0009 13:38:36 Check angles 13:38:36 SkyScan query 13:38:37 SkyScan query done: ret=0 az=117.66<-7844 ze=20.52<-10632 Statuses=0009 0009 13:38:37 Msec=1500 True Az=117.66 Ze=20.52 Az status=0009 Ze status=0009 13:38:37 Check angles 13:38:37 SkyScan query 13:38:37 SkyScan query done: ret=0 az=100.425<-6695 ze=41.475<-9235 Statuses=0009 0009 13:38:37 Msec=2250 True Az=100.425 Ze=41.475 Az status=0009 Ze status=0009 13:38:37 Check angles 13:38:37 SkyScan query 13:38:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 13:38:38 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 13:38:38 Check angles 13:38:38 SkyScan query 13:38:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:38:39 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:38:39 Message to Master queued w/err=0: serial=276234 error=0 13:38:44 Received message from Master: op=Filter serial=276235 13:38:44 Color wheel filter change from 0 to 0 13:38:44 FLIGetFilterPos err=0 currentPosition=0 13:38:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:44 Filter is already there-color wheel unchanged 13:38:44 Received message from Master: op=Shutter serial=276236 13:38:44 Shutter LASER close 13:38:44 Received message from Camera: op=State serial=276238 13:38:44 GetSingleValue result=40 Value=cccccccc 13:38:44 SkyScan query 13:38:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:38:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:45 Parameters OK 13:38:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:45 Set A/D data flow result=40 13:38:45 Set A/D channel type result=40 13:38:45 Set A/D encoding result=40 13:38:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:45 Set channel filter=0.000000e+000 result=40 13:38:45 Config A/D Result=40 13:38:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:45 Get A/D filter: -9.255963e+061 result=40 13:38:45 Get A/D value=-858993460 result=40 13:38:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:45 Parameters OK 13:38:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:45 Set A/D data flow result=40 13:38:45 Set A/D channel type result=40 13:38:45 Set A/D encoding result=40 13:38:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:45 Set channel filter=0.000000e+000 result=40 13:38:45 Config A/D Result=40 13:38:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:45 Get A/D filter: -9.255963e+061 result=40 13:38:45 Get A/D value=-858993460 result=40 13:38:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:45 Aux= 13:38:45 Message to Camera, serial 276238 queued 13:39:21 Received message from Master: op=PointingHead serial=276251 13:39:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:39:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:39:22 Point started: ret=0 13:39:22 point_skyscan result=0 13:39:23 Check angles 13:39:23 SkyScan query 13:39:23 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 13:39:23 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 13:39:23 Check angles 13:39:23 SkyScan query 13:39:24 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 13:39:24 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 13:39:24 Check angles 13:39:24 SkyScan query 13:39:25 SkyScan query done: ret=0 az=143.745<-9583 ze=38.505<-9433 Statuses=0009 0008 13:39:25 Msec=1500 True Az=143.745 Ze=38.505 Az status=0009 Ze status=0008 13:39:25 Check angles 13:39:25 SkyScan query 13:39:25 SkyScan query done: ret=0 az=161.085<-10739 ze=38.505<-9433 Statuses=0009 0008 13:39:25 Msec=2250 True Az=161.085 Ze=38.505 Az status=0009 Ze status=0008 13:39:26 Check angles 13:39:26 SkyScan query 13:39:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:39:26 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:39:26 Check angles 13:39:26 SkyScan query 13:39:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:39:27 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:39:27 Message to Master queued w/err=0: serial=276251 error=0 13:39:32 Received message from Master: op=Filter serial=276252 13:39:32 Color wheel filter change from 0 to 0 13:39:32 FLIGetFilterPos err=0 currentPosition=0 13:39:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:32 Filter is already there-color wheel unchanged 13:39:32 Received message from Master: op=Shutter serial=276253 13:39:32 Shutter LASER close 13:39:32 Received message from Camera: op=State serial=276255 13:39:32 GetSingleValue result=40 Value=cccccccc 13:39:32 SkyScan query 13:39:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:39:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:33 Parameters OK 13:39:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:33 Set A/D data flow result=40 13:39:33 Set A/D channel type result=40 13:39:33 Set A/D encoding result=40 13:39:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:33 Set channel filter=0.000000e+000 result=40 13:39:33 Config A/D Result=40 13:39:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:33 Get A/D filter: -9.255963e+061 result=40 13:39:33 Get A/D value=-858993460 result=40 13:39:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:33 Parameters OK 13:39:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:33 Set A/D data flow result=40 13:39:33 Set A/D channel type result=40 13:39:33 Set A/D encoding result=40 13:39:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:33 Set channel filter=0.000000e+000 result=40 13:39:33 Config A/D Result=40 13:39:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:33 Get A/D filter: -9.255963e+061 result=40 13:39:33 Get A/D value=-858993460 result=40 13:39:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:33 Aux= 13:39:33 Message to Camera, serial 276255 queued 13:40:10 Received message from Master: op=PointingHead serial=276268 13:40:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:40:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:40:10 Point started: ret=0 13:40:10 point_skyscan result=0 13:40:11 Check angles 13:40:11 SkyScan query 13:40:11 SkyScan query done: ret=0 az=151.995<-10133 ze=8.19<-11454 Statuses=0009 0009 13:40:11 Msec=0 True Az=151.995 Ze=8.19 Az status=0009 Ze status=0009 13:40:12 Check angles 13:40:12 SkyScan query 13:40:12 SkyScan query done: ret=0 az=134.73<-8982 ze=-12.27<-12818 Statuses=0009 0009 13:40:12 Msec=750 True Az=134.73 Ze=-12.27 Az status=0009 Ze status=0009 13:40:12 Check angles 13:40:12 SkyScan query 13:40:13 SkyScan query done: ret=0 az=116.88<-7792 ze=-33.84<-14256 Statuses=0009 0009 13:40:13 Msec=1500 True Az=116.88 Ze=-33.84 Az status=0009 Ze status=0009 13:40:13 Check angles 13:40:13 SkyScan query 13:40:14 SkyScan query done: ret=0 az=99.795<-6653 ze=-51.57<-15438 Statuses=0009 0009 13:40:14 Msec=2250 True Az=99.795 Ze=-51.57 Az status=0009 Ze status=0009 13:40:14 Check angles 13:40:14 SkyScan query 13:40:14 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 13:40:14 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 13:40:15 Check angles 13:40:15 SkyScan query 13:40:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:40:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:40:15 Message to Master queued w/err=0: serial=276268 error=0 13:40:20 Received message from Master: op=Filter serial=276269 13:40:20 Color wheel filter change from 0 to 0 13:40:20 FLIGetFilterPos err=0 currentPosition=0 13:40:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:20 Filter is already there-color wheel unchanged 13:40:21 Received message from Master: op=Shutter serial=276270 13:40:21 Shutter LASER close 13:40:21 Received message from Camera: op=State serial=276272 13:40:21 GetSingleValue result=40 Value=cccccccc 13:40:21 SkyScan query 13:40:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:40:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:21 Parameters OK 13:40:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:21 Set A/D data flow result=40 13:40:21 Set A/D channel type result=40 13:40:21 Set A/D encoding result=40 13:40:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:21 Set channel filter=0.000000e+000 result=40 13:40:21 Config A/D Result=40 13:40:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:21 Get A/D filter: -9.255963e+061 result=40 13:40:21 Get A/D value=-858993460 result=40 13:40:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:21 Parameters OK 13:40:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:21 Set A/D data flow result=40 13:40:21 Set A/D channel type result=40 13:40:21 Set A/D encoding result=40 13:40:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:21 Set channel filter=0.000000e+000 result=40 13:40:21 Config A/D Result=40 13:40:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:21 Get A/D filter: -9.255963e+061 result=40 13:40:21 Get A/D value=-858993460 result=40 13:40:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:21 Aux= 13:40:21 Message to Camera, serial 276272 queued 13:40:57 Received message from Master: op=PointingHead serial=276284 13:40:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:40:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:40:57 Point started: ret=0 13:40:57 point_skyscan result=0 13:40:58 Check angles 13:40:58 SkyScan query 13:40:59 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.135<-17409 Statuses=0009 0009 13:40:59 Msec=0 True Az=108.9 Ze=-81.135 Az status=0009 Ze status=0009 13:40:59 Check angles 13:40:59 SkyScan query 13:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.15<-18810 Statuses=0008 0009 13:40:59 Msec=750 True Az=112.995 Ze=-102.15 Az status=0008 Ze status=0009 13:41:00 Check angles 13:41:00 SkyScan query 13:41:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.09<-20206 Statuses=0008 0009 13:41:00 Msec=1500 True Az=112.995 Ze=-123.09 Az status=0008 Ze status=0009 13:41:00 Check angles 13:41:00 SkyScan query 13:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.03<-21602 Statuses=0008 0009 13:41:01 Msec=2250 True Az=112.995 Ze=-144.03 Az status=0008 Ze status=0009 13:41:01 Check angles 13:41:01 SkyScan query 13:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.42<-23028 Statuses=0008 0009 13:41:02 Msec=3000 True Az=112.995 Ze=-165.42 Az status=0008 Ze status=0009 13:41:02 Check angles 13:41:02 SkyScan query 13:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:41:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:41:02 Message to Master queued w/err=0: serial=276284 error=0 13:41:07 Received message from Master: op=Filter serial=276285 13:41:07 Color wheel filter change from 0 to 0 13:41:07 FLIGetFilterPos err=0 currentPosition=0 13:41:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:07 Filter is already there-color wheel unchanged 13:41:08 Received message from Master: op=Shutter serial=276286 13:41:08 Shutter LASER open 13:41:08 Received message from Camera: op=State serial=276288 13:41:08 GetSingleValue result=40 Value=cccccccc 13:41:08 SkyScan query 13:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:41:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:08 Parameters OK 13:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:08 Set A/D data flow result=40 13:41:08 Set A/D channel type result=40 13:41:08 Set A/D encoding result=40 13:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:08 Set channel filter=0.000000e+000 result=40 13:41:08 Config A/D Result=40 13:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:08 Get A/D filter: -9.255963e+061 result=40 13:41:08 Get A/D value=-858993460 result=40 13:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:08 Parameters OK 13:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:08 Set A/D data flow result=40 13:41:08 Set A/D channel type result=40 13:41:08 Set A/D encoding result=40 13:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:08 Set channel filter=0.000000e+000 result=40 13:41:08 Config A/D Result=40 13:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:08 Get A/D filter: -9.255963e+061 result=40 13:41:08 Get A/D value=-858993460 result=40 13:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:08 Aux= 13:41:08 Message to Camera, serial 276288 queued 13:41:17 Received message from Master: op=Shutter serial=276298 13:41:17 Shutter LASER close 13:41:17 Received message from Master: op=PointingHead serial=276302 13:41:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:41:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:41:18 Point started: ret=0 13:41:18 point_skyscan result=0 13:41:18 Check angles 13:41:18 SkyScan query 13:41:19 SkyScan query done: ret=0 az=89.43<-5962 ze=156.69<-1554 Statuses=0009 0009 13:41:19 Msec=0 True Az=89.43 Ze=156.69 Az status=0009 Ze status=0009 13:41:19 Check angles 13:41:19 SkyScan query 13:41:20 SkyScan query done: ret=0 az=72.03<-4802 ze=135.78<-2948 Statuses=0009 0009 13:41:20 Msec=750 True Az=72.03 Ze=135.78 Az status=0009 Ze status=0009 13:41:20 Check angles 13:41:20 SkyScan query 13:41:20 SkyScan query done: ret=0 az=54.57<-3638 ze=114.75<-4350 Statuses=0009 0009 13:41:20 Msec=1500 True Az=54.57 Ze=114.75 Az status=0009 Ze status=0009 13:41:21 Check angles 13:41:21 SkyScan query 13:41:21 SkyScan query done: ret=0 az=40.98<-2732 ze=93.84<-5744 Statuses=0009 0009 13:41:21 Msec=2250 True Az=40.98 Ze=93.84 Az status=0009 Ze status=0009 13:41:21 Check angles 13:41:21 SkyScan query 13:41:22 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 13:41:22 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 13:41:22 Check angles 13:41:22 SkyScan query 13:41:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 13:41:23 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 13:41:23 Check angles 13:41:23 SkyScan query 13:41:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:41:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:41:23 Message to Master queued w/err=0: serial=276302 error=0 13:41:28 Received message from Master: op=Filter serial=276303 13:41:28 Color wheel filter change from 0 to 0 13:41:28 FLIGetFilterPos err=0 currentPosition=0 13:41:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:28 Filter is already there-color wheel unchanged 13:41:29 Received message from Master: op=Shutter serial=276304 13:41:29 Shutter LASER close 13:41:29 Received message from Camera: op=State serial=276306 13:41:29 GetSingleValue result=40 Value=cccccccc 13:41:29 SkyScan query 13:41:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:41:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:29 Parameters OK 13:41:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:29 Set A/D data flow result=40 13:41:29 Set A/D channel type result=40 13:41:29 Set A/D encoding result=40 13:41:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:29 Set channel filter=0.000000e+000 result=40 13:41:29 Config A/D Result=40 13:41:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:29 Get A/D filter: -9.255963e+061 result=40 13:41:29 Get A/D value=-858993460 result=40 13:41:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:29 Parameters OK 13:41:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:29 Set A/D data flow result=40 13:41:29 Set A/D channel type result=40 13:41:29 Set A/D encoding result=40 13:41:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:29 Set channel filter=0.000000e+000 result=40 13:41:29 Config A/D Result=40 13:41:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:29 Get A/D filter: -9.255963e+061 result=40 13:41:29 Get A/D value=-858993460 result=40 13:41:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:29 Aux= 13:41:29 Message to Camera, serial 276306 queued 13:42:06 Received message from Master: op=PointingHead serial=276319 13:42:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:42:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:42:07 Point started: ret=0 13:42:07 point_skyscan result=0 13:42:07 Check angles 13:42:07 SkyScan query 13:42:08 SkyScan query done: ret=0 az=64.08<-4272 ze=66.555<-7563 Statuses=0009 0008 13:42:08 Msec=0 True Az=64.08 Ze=66.555 Az status=0009 Ze status=0008 13:42:08 Check angles 13:42:08 SkyScan query 13:42:09 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 13:42:09 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 13:42:09 Check angles 13:42:09 SkyScan query 13:42:09 SkyScan query done: ret=0 az=98.94<-6596 ze=66.495<-7567 Statuses=0009 0008 13:42:09 Msec=1500 True Az=98.94 Ze=66.495 Az status=0009 Ze status=0008 13:42:10 Check angles 13:42:10 SkyScan query 13:42:10 SkyScan query done: ret=0 az=116.505<-7767 ze=66.495<-7567 Statuses=0009 0008 13:42:10 Msec=2250 True Az=116.505 Ze=66.495 Az status=0009 Ze status=0008 13:42:10 Check angles 13:42:10 SkyScan query 13:42:11 SkyScan query done: ret=0 az=133.935<-8929 ze=66.495<-7567 Statuses=0009 0008 13:42:11 Msec=3000 True Az=133.935 Ze=66.495 Az status=0009 Ze status=0008 13:42:11 Check angles 13:42:11 SkyScan query 13:42:12 SkyScan query done: ret=0 az=151.32<-10088 ze=66.495<-7567 Statuses=0009 0008 13:42:12 Msec=3750 True Az=151.32 Ze=66.495 Az status=0009 Ze status=0008 13:42:12 Check angles 13:42:12 SkyScan query 13:42:12 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:42:12 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:42:12 Message to Master queued w/err=0: serial=276319 error=0 13:42:17 Received message from Master: op=Filter serial=276320 13:42:17 Color wheel filter change from 0 to 0 13:42:17 FLIGetFilterPos err=0 currentPosition=0 13:42:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:17 Filter is already there-color wheel unchanged 13:42:18 Received message from Master: op=Shutter serial=276321 13:42:18 Shutter LASER close 13:42:18 Received message from Camera: op=State serial=276323 13:42:18 GetSingleValue result=40 Value=cccccccc 13:42:18 SkyScan query 13:42:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:42:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:18 Parameters OK 13:42:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:18 Set A/D data flow result=40 13:42:18 Set A/D channel type result=40 13:42:18 Set A/D encoding result=40 13:42:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:18 Set channel filter=0.000000e+000 result=40 13:42:18 Config A/D Result=40 13:42:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:18 Get A/D filter: -9.255963e+061 result=40 13:42:18 Get A/D value=-858993460 result=40 13:42:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:18 Parameters OK 13:42:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:18 Set A/D data flow result=40 13:42:18 Set A/D channel type result=40 13:42:18 Set A/D encoding result=40 13:42:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:18 Set channel filter=0.000000e+000 result=40 13:42:18 Config A/D Result=40 13:42:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:18 Get A/D filter: -9.255963e+061 result=40 13:42:18 Get A/D value=-858993460 result=40 13:42:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:18 Aux= 13:42:18 Message to Camera, serial 276323 queued 13:42:55 Received message from Master: op=PointingHead serial=276336 13:42:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:42:55 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:42:55 Point started: ret=0 13:42:55 point_skyscan result=0 13:42:56 Check angles 13:42:56 SkyScan query 13:42:57 SkyScan query done: ret=0 az=135.12<-9008 ze=36.81<-9546 Statuses=0009 0009 13:42:57 Msec=0 True Az=135.12 Ze=36.81 Az status=0009 Ze status=0009 13:42:57 Check angles 13:42:57 SkyScan query 13:42:57 SkyScan query done: ret=0 az=117.165<-7811 ze=15.48<-10968 Statuses=0009 0009 13:42:57 Msec=750 True Az=117.165 Ze=15.48 Az status=0009 Ze status=0009 13:42:58 Check angles 13:42:58 SkyScan query 13:42:58 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.52<-12368 Statuses=0009 0009 13:42:58 Msec=1500 True Az=99.87 Ze=-5.52 Az status=0009 Ze status=0009 13:42:58 Check angles 13:42:58 SkyScan query 13:42:59 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.49<-13766 Statuses=0009 0009 13:42:59 Msec=2250 True Az=82.335 Ze=-26.49 Az status=0009 Ze status=0009 13:42:59 Check angles 13:42:59 SkyScan query 13:43:00 SkyScan query done: ret=0 az=64.755<-4317 ze=-38.595<-14573 Statuses=0009 0008 13:43:00 Msec=3000 True Az=64.755 Ze=-38.595 Az status=0009 Ze status=0008 13:43:00 Check angles 13:43:00 SkyScan query 13:43:00 SkyScan query done: ret=0 az=46.995<-3133 ze=-38.52<-14568 Statuses=0009 0008 13:43:00 Msec=3750 True Az=46.995 Ze=-38.52 Az status=0009 Ze status=0008 13:43:01 Check angles 13:43:01 SkyScan query 13:43:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:43:01 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:43:01 Message to Master queued w/err=0: serial=276336 error=0 13:43:06 Received message from Master: op=Filter serial=276337 13:43:06 Color wheel filter change from 0 to 0 13:43:06 FLIGetFilterPos err=0 currentPosition=0 13:43:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:06 Filter is already there-color wheel unchanged 13:43:06 Received message from Master: op=Shutter serial=276338 13:43:06 Shutter LASER close 13:43:06 Received message from Camera: op=State serial=276340 13:43:06 GetSingleValue result=40 Value=cccccccc 13:43:06 SkyScan query 13:43:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:43:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:07 Parameters OK 13:43:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:07 Set A/D data flow result=40 13:43:07 Set A/D channel type result=40 13:43:07 Set A/D encoding result=40 13:43:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:07 Set channel filter=0.000000e+000 result=40 13:43:07 Config A/D Result=40 13:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:07 Get A/D filter: -9.255963e+061 result=40 13:43:07 Get A/D value=-858993460 result=40 13:43:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:07 Parameters OK 13:43:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:07 Set A/D data flow result=40 13:43:07 Set A/D channel type result=40 13:43:07 Set A/D encoding result=40 13:43:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:07 Set channel filter=0.000000e+000 result=40 13:43:07 Config A/D Result=40 13:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:07 Get A/D filter: -9.255963e+061 result=40 13:43:07 Get A/D value=-858993460 result=40 13:43:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:07 Aux= 13:43:07 Message to Camera, serial 276340 queued 13:43:44 Received message from Master: op=PointingHead serial=276353 13:43:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:43:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:43:44 Point started: ret=0 13:43:44 point_skyscan result=0 13:43:45 Check angles 13:43:45 SkyScan query 13:43:46 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.76<-16584 Statuses=0009 0009 13:43:46 Msec=0 True Az=64.425 Ze=-68.76 Az status=0009 Ze status=0009 13:43:46 Check angles 13:43:46 SkyScan query 13:43:46 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.73<-17982 Statuses=0009 0009 13:43:46 Msec=750 True Az=81.885 Ze=-89.73 Az status=0009 Ze status=0009 13:43:46 Check angles 13:43:46 SkyScan query 13:43:47 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.67<-19378 Statuses=0009 0009 13:43:47 Msec=1500 True Az=99.39 Ze=-110.67 Az status=0009 Ze status=0009 13:43:47 Check angles 13:43:47 SkyScan query 13:43:48 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.595<-20773 Statuses=0009 0009 13:43:48 Msec=2250 True Az=116.775 Ze=-131.595 Az status=0009 Ze status=0009 13:43:48 Check angles 13:43:48 SkyScan query 13:43:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 13:43:49 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 13:43:49 Check angles 13:43:49 SkyScan query 13:43:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 13:43:49 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 13:43:49 Message to Master queued w/err=0: serial=276353 error=0 13:43:54 Received message from Master: op=Filter serial=276354 13:43:54 Color wheel filter change from 0 to 0 13:43:54 FLIGetFilterPos err=0 currentPosition=0 13:43:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:54 Filter is already there-color wheel unchanged 13:43:54 Received message from Master: op=Shutter serial=276355 13:43:54 Shutter LASER close 13:43:55 Received message from Camera: op=State serial=276357 13:43:55 GetSingleValue result=40 Value=cccccccc 13:43:55 SkyScan query 13:43:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:43:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:55 Parameters OK 13:43:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:55 Set A/D data flow result=40 13:43:55 Set A/D channel type result=40 13:43:55 Set A/D encoding result=40 13:43:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:55 Set channel filter=0.000000e+000 result=40 13:43:55 Config A/D Result=40 13:43:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:55 Get A/D filter: -9.255963e+061 result=40 13:43:55 Get A/D value=-858993460 result=40 13:43:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:55 Parameters OK 13:43:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:55 Set A/D data flow result=40 13:43:55 Set A/D channel type result=40 13:43:55 Set A/D encoding result=40 13:43:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:55 Set channel filter=0.000000e+000 result=40 13:43:55 Config A/D Result=40 13:43:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:55 Get A/D filter: -9.255963e+061 result=40 13:43:55 Get A/D value=-858993460 result=40 13:43:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:55 Aux= 13:43:55 Message to Camera, serial 276357 queued 13:44:31 Received message from Master: op=PointingHead serial=276369 13:44:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:44:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:44:31 Point started: ret=0 13:44:31 point_skyscan result=0 13:44:32 Check angles 13:44:32 SkyScan query 13:44:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 13:44:33 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 13:44:33 Check angles 13:44:33 SkyScan query 13:44:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:44:34 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:44:34 Message to Master queued w/err=0: serial=276369 error=0 13:44:39 Received message from Master: op=Filter serial=276370 13:44:39 Color wheel filter change from 0 to 0 13:44:39 FLIGetFilterPos err=0 currentPosition=0 13:44:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:39 Filter is already there-color wheel unchanged 13:44:39 Received message from Master: op=Shutter serial=276371 13:44:39 Shutter LASER open 13:44:39 Received message from Camera: op=State serial=276373 13:44:39 GetSingleValue result=40 Value=cccccccc 13:44:39 SkyScan query 13:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:44:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:39 Parameters OK 13:44:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:39 Set A/D data flow result=40 13:44:39 Set A/D channel type result=40 13:44:39 Set A/D encoding result=40 13:44:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:39 Set channel filter=0.000000e+000 result=40 13:44:39 Config A/D Result=40 13:44:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:39 Get A/D filter: -9.255963e+061 result=40 13:44:39 Get A/D value=-858993460 result=40 13:44:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:39 Parameters OK 13:44:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:39 Set A/D data flow result=40 13:44:39 Set A/D channel type result=40 13:44:39 Set A/D encoding result=40 13:44:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:39 Set channel filter=0.000000e+000 result=40 13:44:39 Config A/D Result=40 13:44:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:39 Get A/D filter: -9.255963e+061 result=40 13:44:39 Get A/D value=-858993460 result=40 13:44:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:39 Aux= 13:44:39 Message to Camera, serial 276373 queued 13:44:48 Received message from Master: op=Shutter serial=276383 13:44:48 Shutter LASER close 13:44:48 Received message from Master: op=PointingHead serial=276387 13:44:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:44:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:44:49 Point started: ret=0 13:44:49 point_skyscan result=0 13:44:50 Check angles 13:44:50 SkyScan query 13:44:50 SkyScan query done: ret=0 az=136.44<-9096 ze=-142.635<-21509 Statuses=0009 0009 13:44:50 Msec=0 True Az=136.44 Ze=-142.635 Az status=0009 Ze status=0009 13:44:50 Check angles 13:44:50 SkyScan query 13:44:51 SkyScan query done: ret=0 az=154.32<-10288 ze=-121.335<-20089 Statuses=0009 0009 13:44:51 Msec=750 True Az=154.32 Ze=-121.335 Az status=0009 Ze status=0009 13:44:51 Check angles 13:44:51 SkyScan query 13:44:52 SkyScan query done: ret=0 az=171.81<-11454 ze=-100.275<-18685 Statuses=0009 0009 13:44:52 Msec=1500 True Az=171.81 Ze=-100.275 Az status=0009 Ze status=0009 13:44:52 Check angles 13:44:52 SkyScan query 13:44:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.35<-17290 Statuses=0008 0009 13:44:52 Msec=2250 True Az=175.995 Ze=-79.35 Az status=0008 Ze status=0009 13:44:53 Check angles 13:44:53 SkyScan query 13:44:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.365<-15891 Statuses=0008 0009 13:44:53 Msec=3000 True Az=176.01 Ze=-58.365 Az status=0008 Ze status=0009 13:44:53 Check angles 13:44:53 SkyScan query 13:44:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:44:54 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:44:54 Message to Master queued w/err=0: serial=276387 error=0 13:44:59 Received message from Master: op=Filter serial=276388 13:44:59 Color wheel filter change from 0 to 0 13:44:59 FLIGetFilterPos err=0 currentPosition=0 13:44:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:59 Filter is already there-color wheel unchanged 13:44:59 Received message from Master: op=Shutter serial=276389 13:44:59 Shutter LASER close 13:44:59 Received message from Camera: op=State serial=276391 13:44:59 GetSingleValue result=40 Value=cccccccc 13:44:59 SkyScan query 13:45:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:45:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:00 Parameters OK 13:45:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:00 Set A/D data flow result=40 13:45:00 Set A/D channel type result=40 13:45:00 Set A/D encoding result=40 13:45:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:00 Set channel filter=0.000000e+000 result=40 13:45:00 Config A/D Result=40 13:45:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:00 Get A/D filter: -9.255963e+061 result=40 13:45:00 Get A/D value=-858993460 result=40 13:45:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:00 Parameters OK 13:45:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:00 Set A/D data flow result=40 13:45:00 Set A/D channel type result=40 13:45:00 Set A/D encoding result=40 13:45:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:00 Set channel filter=0.000000e+000 result=40 13:45:00 Config A/D Result=40 13:45:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:00 Get A/D filter: -9.255963e+061 result=40 13:45:00 Get A/D value=-858993460 result=40 13:45:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:00 Aux= 13:45:00 Message to Camera, serial 276391 queued 13:45:27 Received message from Master: op=Identify serial=276392 13:45:37 Received message from Master: op=PointingHead serial=276407 13:45:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:45:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:45:37 Point started: ret=0 13:45:37 point_skyscan result=0 13:45:38 Check angles 13:45:38 SkyScan query 13:45:38 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.705<-13447 Statuses=0009 0009 13:45:38 Msec=0 True Az=152.91 Ze=-21.705 Az status=0009 Ze status=0009 13:45:39 Check angles 13:45:39 SkyScan query 13:45:39 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.72<-12048 Statuses=0009 0009 13:45:39 Msec=750 True Az=135.375 Ze=-0.72 Az status=0009 Ze status=0009 13:45:39 Check angles 13:45:39 SkyScan query 13:45:40 SkyScan query done: ret=0 az=117.6<-7840 ze=20.685<-10621 Statuses=0009 0009 13:45:40 Msec=1500 True Az=117.6 Ze=20.685 Az status=0009 Ze status=0009 13:45:40 Check angles 13:45:40 SkyScan query 13:45:41 SkyScan query done: ret=0 az=100.185<-6679 ze=41.625<-9225 Statuses=0009 0009 13:45:41 Msec=2250 True Az=100.185 Ze=41.625 Az status=0009 Ze status=0009 13:45:41 Check angles 13:45:41 SkyScan query [UTC 2018-12-19 13:45:41] 13:45:41 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 13:45:41 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 13:45:42 Check angles 13:45:42 SkyScan query 13:45:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:45:42 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 13:45:42 Message to Master queued w/err=0: serial=276407 error=0 13:45:47 Received message from Master: op=Filter serial=276408 13:45:47 Color wheel filter change from 0 to 0 13:45:47 FLIGetFilterPos err=0 currentPosition=0 13:45:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:47 Filter is already there-color wheel unchanged 13:45:47 Received message from Master: op=Shutter serial=276409 13:45:47 Shutter LASER close 13:45:47 Received message from Camera: op=State serial=276411 13:45:47 GetSingleValue result=40 Value=cccccccc 13:45:47 SkyScan query 13:45:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:45:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:48 Parameters OK 13:45:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:48 Set A/D data flow result=40 13:45:48 Set A/D channel type result=40 13:45:48 Set A/D encoding result=40 13:45:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:48 Set channel filter=0.000000e+000 result=40 13:45:48 Config A/D Result=40 13:45:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:48 Get A/D filter: -9.255963e+061 result=40 13:45:48 Get A/D value=-858993460 result=40 13:45:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:48 Parameters OK 13:45:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:48 Set A/D data flow result=40 13:45:48 Set A/D channel type result=40 13:45:48 Set A/D encoding result=40 13:45:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:48 Set channel filter=0.000000e+000 result=40 13:45:48 Config A/D Result=40 13:45:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:48 Get A/D filter: -9.255963e+061 result=40 13:45:48 Get A/D value=-858993460 result=40 13:45:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:48 Aux= 13:45:48 Message to Camera, serial 276411 queued 13:46:25 Received message from Master: op=PointingHead serial=276424 13:46:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:46:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:46:25 Point started: ret=0 13:46:25 point_skyscan result=0 13:46:26 Check angles 13:46:26 SkyScan query 13:46:26 SkyScan query done: ret=0 az=109.71<-7314 ze=38.49<-9434 Statuses=0009 0008 13:46:26 Msec=0 True Az=109.71 Ze=38.49 Az status=0009 Ze status=0008 13:46:27 Check angles 13:46:27 SkyScan query 13:46:27 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 13:46:27 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 13:46:27 Check angles 13:46:27 SkyScan query 13:46:28 SkyScan query done: ret=0 az=144.555<-9637 ze=38.505<-9433 Statuses=0009 0008 13:46:28 Msec=1500 True Az=144.555 Ze=38.505 Az status=0009 Ze status=0008 13:46:28 Check angles 13:46:28 SkyScan query 13:46:29 SkyScan query done: ret=0 az=161.91<-10794 ze=38.505<-9433 Statuses=0009 0008 13:46:29 Msec=2250 True Az=161.91 Ze=38.505 Az status=0009 Ze status=0008 13:46:29 Check angles 13:46:29 SkyScan query 13:46:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:46:29 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:46:30 Check angles 13:46:30 SkyScan query 13:46:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:46:30 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:46:30 Message to Master queued w/err=0: serial=276424 error=0 13:46:35 Received message from Master: op=Filter serial=276425 13:46:35 Color wheel filter change from 0 to 0 13:46:35 FLIGetFilterPos err=0 currentPosition=0 13:46:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:35 Filter is already there-color wheel unchanged 13:46:35 Received message from Master: op=Shutter serial=276426 13:46:35 Shutter LASER close 13:46:35 Received message from Camera: op=State serial=276428 13:46:35 GetSingleValue result=40 Value=cccccccc 13:46:35 SkyScan query 13:46:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:46:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:36 Parameters OK 13:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:36 Set A/D data flow result=40 13:46:36 Set A/D channel type result=40 13:46:36 Set A/D encoding result=40 13:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:36 Set channel filter=0.000000e+000 result=40 13:46:36 Config A/D Result=40 13:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:36 Get A/D filter: -9.255963e+061 result=40 13:46:36 Get A/D value=-858993460 result=40 13:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:36 Parameters OK 13:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:36 Set A/D data flow result=40 13:46:36 Set A/D channel type result=40 13:46:36 Set A/D encoding result=40 13:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:36 Set channel filter=0.000000e+000 result=40 13:46:36 Config A/D Result=40 13:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:36 Get A/D filter: -9.255963e+061 result=40 13:46:36 Get A/D value=-858993460 result=40 13:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:36 Aux= 13:46:36 Message to Camera, serial 276428 queued 13:47:13 Received message from Master: op=PointingHead serial=276441 13:47:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:47:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:47:13 Point started: ret=0 13:47:13 point_skyscan result=0 13:47:14 Check angles 13:47:14 SkyScan query 13:47:14 SkyScan query done: ret=0 az=153.12<-10208 ze=9.015<-11399 Statuses=0009 0009 13:47:14 Msec=0 True Az=153.12 Ze=9.015 Az status=0009 Ze status=0009 13:47:15 Check angles 13:47:15 SkyScan query 13:47:15 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.015<-12801 Statuses=0009 0009 13:47:15 Msec=750 True Az=135.675 Ze=-12.015 Az status=0009 Ze status=0009 13:47:15 Check angles 13:47:15 SkyScan query 13:47:16 SkyScan query done: ret=0 az=118.17<-7878 ze=-32.88<-14192 Statuses=0009 0009 13:47:16 Msec=1500 True Az=118.17 Ze=-32.88 Az status=0009 Ze status=0009 13:47:16 Check angles 13:47:16 SkyScan query 13:47:17 SkyScan query done: ret=0 az=100.74<-6716 ze=-51.51<-15434 Statuses=0009 0009 13:47:17 Msec=2250 True Az=100.74 Ze=-51.51 Az status=0009 Ze status=0009 13:47:17 Check angles 13:47:17 SkyScan query 13:47:17 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 13:47:17 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 13:47:18 Check angles 13:47:18 SkyScan query 13:47:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:47:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:47:18 Message to Master queued w/err=0: serial=276441 error=0 13:47:23 Received message from Master: op=Filter serial=276442 13:47:23 Color wheel filter change from 0 to 0 13:47:23 FLIGetFilterPos err=0 currentPosition=0 13:47:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:23 Filter is already there-color wheel unchanged 13:47:23 Received message from Master: op=Shutter serial=276443 13:47:23 Shutter LASER close 13:47:23 Received message from Camera: op=State serial=276445 13:47:23 GetSingleValue result=40 Value=cccccccc 13:47:23 SkyScan query 13:47:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:47:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:24 Parameters OK 13:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:24 Set A/D data flow result=40 13:47:24 Set A/D channel type result=40 13:47:24 Set A/D encoding result=40 13:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:24 Set channel filter=0.000000e+000 result=40 13:47:24 Config A/D Result=40 13:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:24 Get A/D filter: -9.255963e+061 result=40 13:47:24 Get A/D value=-858993460 result=40 13:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:24 Parameters OK 13:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:24 Set A/D data flow result=40 13:47:24 Set A/D channel type result=40 13:47:24 Set A/D encoding result=40 13:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:24 Set channel filter=0.000000e+000 result=40 13:47:24 Config A/D Result=40 13:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:24 Get A/D filter: -9.255963e+061 result=40 13:47:24 Get A/D value=-858993460 result=40 13:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:24 Aux= 13:47:24 Message to Camera, serial 276445 queued 13:48:01 Received message from Master: op=PointingHead serial=276458 13:48:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:48:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:48:01 Point started: ret=0 13:48:01 point_skyscan result=0 13:48:02 Check angles 13:48:02 SkyScan query 13:48:03 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.06<-17404 Statuses=0009 0009 13:48:03 Msec=0 True Az=108.825 Ze=-81.06 Az status=0009 Ze status=0009 13:48:03 Check angles 13:48:03 SkyScan query 13:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 13:48:03 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 13:48:03 Check angles 13:48:03 SkyScan query 13:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 13:48:04 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 13:48:04 Check angles 13:48:04 SkyScan query 13:48:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 13:48:05 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 13:48:05 Check angles 13:48:05 SkyScan query 13:48:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 13:48:06 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 13:48:06 Check angles 13:48:06 SkyScan query 13:48:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 13:48:06 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 13:48:06 Message to Master queued w/err=0: serial=276458 error=0 13:48:11 Received message from Master: op=Filter serial=276459 13:48:11 Color wheel filter change from 0 to 0 13:48:11 FLIGetFilterPos err=0 currentPosition=0 13:48:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:11 Filter is already there-color wheel unchanged 13:48:11 Received message from Master: op=Shutter serial=276460 13:48:11 Shutter LASER open 13:48:12 Received message from Camera: op=State serial=276462 13:48:12 GetSingleValue result=40 Value=cccccccc 13:48:12 SkyScan query 13:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:48:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:12 Parameters OK 13:48:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:12 Set A/D data flow result=40 13:48:12 Set A/D channel type result=40 13:48:12 Set A/D encoding result=40 13:48:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:12 Set channel filter=0.000000e+000 result=40 13:48:12 Config A/D Result=40 13:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:12 Get A/D filter: -9.255963e+061 result=40 13:48:12 Get A/D value=-858993460 result=40 13:48:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:12 Parameters OK 13:48:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:12 Set A/D data flow result=40 13:48:12 Set A/D channel type result=40 13:48:12 Set A/D encoding result=40 13:48:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:12 Set channel filter=0.000000e+000 result=40 13:48:12 Config A/D Result=40 13:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:12 Get A/D filter: -9.255963e+061 result=40 13:48:12 Get A/D value=-858993460 result=40 13:48:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:12 Aux= 13:48:12 Message to Camera, serial 276462 queued 13:48:21 Received message from Master: op=Shutter serial=276472 13:48:21 Shutter LASER close 13:48:21 Received message from Master: op=PointingHead serial=276476 13:48:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:48:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:48:22 Point started: ret=0 13:48:22 point_skyscan result=0 13:48:22 Check angles 13:48:22 SkyScan query 13:48:23 SkyScan query done: ret=0 az=90.03<-6002 ze=157.365<-1509 Statuses=0009 0009 13:48:23 Msec=0 True Az=90.03 Ze=157.365 Az status=0009 Ze status=0009 13:48:23 Check angles 13:48:23 SkyScan query 13:48:24 SkyScan query done: ret=0 az=72.105<-4807 ze=135.99<-2934 Statuses=0009 0009 13:48:24 Msec=750 True Az=72.105 Ze=135.99 Az status=0009 Ze status=0009 13:48:24 Check angles 13:48:24 SkyScan query 13:48:24 SkyScan query done: ret=0 az=54.735<-3649 ze=115.005<-4333 Statuses=0009 0009 13:48:24 Msec=1500 True Az=54.735 Ze=115.005 Az status=0009 Ze status=0009 13:48:25 Check angles 13:48:25 SkyScan query 13:48:25 SkyScan query done: ret=0 az=40.995<-2733 ze=94.065<-5729 Statuses=0009 0009 13:48:25 Msec=2250 True Az=40.995 Ze=94.065 Az status=0009 Ze status=0009 13:48:25 Check angles 13:48:25 SkyScan query 13:48:26 SkyScan query done: ret=0 az=40.995<-2733 ze=72.63<-7158 Statuses=0008 0009 13:48:26 Msec=3000 True Az=40.995 Ze=72.63 Az status=0008 Ze status=0009 13:48:26 Check angles 13:48:26 SkyScan query 13:48:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 13:48:27 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 13:48:27 Check angles 13:48:27 SkyScan query 13:48:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:48:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:48:27 Message to Master queued w/err=0: serial=276476 error=0 13:48:32 Received message from Master: op=Filter serial=276477 13:48:32 Color wheel filter change from 0 to 0 13:48:32 FLIGetFilterPos err=0 currentPosition=0 13:48:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:32 Filter is already there-color wheel unchanged 13:48:33 Received message from Master: op=Shutter serial=276478 13:48:33 Shutter LASER close 13:48:33 Received message from Camera: op=State serial=276480 13:48:33 GetSingleValue result=40 Value=cccccccc 13:48:33 SkyScan query 13:48:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:48:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:33 Parameters OK 13:48:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:33 Set A/D data flow result=40 13:48:33 Set A/D channel type result=40 13:48:33 Set A/D encoding result=40 13:48:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:33 Set channel filter=0.000000e+000 result=40 13:48:33 Config A/D Result=40 13:48:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:33 Get A/D filter: -9.255963e+061 result=40 13:48:33 Get A/D value=-858993460 result=40 13:48:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:33 Parameters OK 13:48:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:33 Set A/D data flow result=40 13:48:33 Set A/D channel type result=40 13:48:33 Set A/D encoding result=40 13:48:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:33 Set channel filter=0.000000e+000 result=40 13:48:33 Config A/D Result=40 13:48:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:33 Get A/D filter: -9.255963e+061 result=40 13:48:33 Get A/D value=-858993460 result=40 13:48:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:33 Aux= 13:48:33 Message to Camera, serial 276480 queued 13:49:10 Received message from Master: op=PointingHead serial=276493 13:49:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:49:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:49:10 Point started: ret=0 13:49:10 point_skyscan result=0 13:49:11 Check angles 13:49:11 SkyScan query 13:49:12 SkyScan query done: ret=0 az=64.215<-4281 ze=66.54<-7564 Statuses=0009 0008 13:49:12 Msec=0 True Az=64.215 Ze=66.54 Az status=0009 Ze status=0008 13:49:12 Check angles 13:49:12 SkyScan query 13:49:13 SkyScan query done: ret=0 az=81.72<-5448 ze=66.51<-7566 Statuses=0009 0008 13:49:13 Msec=750 True Az=81.72 Ze=66.51 Az status=0009 Ze status=0008 13:49:13 Check angles 13:49:13 SkyScan query 13:49:13 SkyScan query done: ret=0 az=99.24<-6616 ze=66.495<-7567 Statuses=0009 0008 13:49:13 Msec=1500 True Az=99.24 Ze=66.495 Az status=0009 Ze status=0008 13:49:14 Check angles 13:49:14 SkyScan query 13:49:14 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 13:49:14 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 13:49:14 Check angles 13:49:14 SkyScan query 13:49:15 SkyScan query done: ret=0 az=134.85<-8990 ze=66.495<-7567 Statuses=0009 0008 13:49:15 Msec=3000 True Az=134.85 Ze=66.495 Az status=0009 Ze status=0008 13:49:15 Check angles 13:49:15 SkyScan query 13:49:16 SkyScan query done: ret=0 az=152.28<-10152 ze=66.495<-7567 Statuses=0009 0008 13:49:16 Msec=3750 True Az=152.28 Ze=66.495 Az status=0009 Ze status=0008 13:49:16 Check angles 13:49:16 SkyScan query 13:49:16 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:49:16 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:49:16 Message to Master queued w/err=0: serial=276493 error=0 13:49:21 Received message from Master: op=Filter serial=276494 13:49:21 Color wheel filter change from 0 to 0 13:49:21 FLIGetFilterPos err=0 currentPosition=0 13:49:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:21 Filter is already there-color wheel unchanged 13:49:22 Received message from Master: op=Shutter serial=276495 13:49:22 Shutter LASER close 13:49:22 Received message from Camera: op=State serial=276497 13:49:22 GetSingleValue result=40 Value=cccccccc 13:49:22 SkyScan query 13:49:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:49:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:22 Parameters OK 13:49:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:22 Set A/D data flow result=40 13:49:22 Set A/D channel type result=40 13:49:22 Set A/D encoding result=40 13:49:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:22 Set channel filter=0.000000e+000 result=40 13:49:22 Config A/D Result=40 13:49:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:22 Get A/D filter: -9.255963e+061 result=40 13:49:22 Get A/D value=-858993460 result=40 13:49:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:22 Parameters OK 13:49:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:22 Set A/D data flow result=40 13:49:22 Set A/D channel type result=40 13:49:22 Set A/D encoding result=40 13:49:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:22 Set channel filter=0.000000e+000 result=40 13:49:22 Config A/D Result=40 13:49:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:22 Get A/D filter: -9.255963e+061 result=40 13:49:22 Get A/D value=-858993460 result=40 13:49:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:22 Aux= 13:49:22 Message to Camera, serial 276497 queued 13:49:59 Received message from Master: op=PointingHead serial=276510 13:49:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:49:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:49:59 Point started: ret=0 13:49:59 point_skyscan result=0 13:50:00 Check angles 13:50:00 SkyScan query 13:50:01 SkyScan query done: ret=0 az=135.195<-9013 ze=36.93<-9538 Statuses=0009 0009 13:50:01 Msec=0 True Az=135.195 Ze=36.93 Az status=0009 Ze status=0009 13:50:01 Check angles 13:50:01 SkyScan query 13:50:01 SkyScan query done: ret=0 az=117.72<-7848 ze=15.96<-10936 Statuses=0009 0009 13:50:01 Msec=750 True Az=117.72 Ze=15.96 Az status=0009 Ze status=0009 13:50:02 Check angles 13:50:02 SkyScan query 13:50:02 SkyScan query done: ret=0 az=100.35<-6690 ze=-4.965<-12331 Statuses=0009 0009 13:50:02 Msec=1500 True Az=100.35 Ze=-4.965 Az status=0009 Ze status=0009 13:50:02 Check angles 13:50:02 SkyScan query 13:50:03 SkyScan query done: ret=0 az=82.77<-5518 ze=-25.935<-13729 Statuses=0009 0009 13:50:03 Msec=2250 True Az=82.77 Ze=-25.935 Az status=0009 Ze status=0009 13:50:03 Check angles 13:50:03 SkyScan query 13:50:04 SkyScan query done: ret=0 az=65.385<-4359 ze=-38.58<-14572 Statuses=0009 0008 13:50:04 Msec=3000 True Az=65.385 Ze=-38.58 Az status=0009 Ze status=0008 13:50:04 Check angles 13:50:04 SkyScan query 13:50:04 SkyScan query done: ret=0 az=47.865<-3191 ze=-38.52<-14568 Statuses=0009 0008 13:50:04 Msec=3750 True Az=47.865 Ze=-38.52 Az status=0009 Ze status=0008 13:50:05 Check angles 13:50:05 SkyScan query 13:50:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:50:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:50:05 Message to Master queued w/err=0: serial=276510 error=0 13:50:10 Received message from Master: op=Filter serial=276511 13:50:10 Color wheel filter change from 0 to 0 13:50:10 FLIGetFilterPos err=0 currentPosition=0 13:50:10 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:10 Filter is already there-color wheel unchanged 13:50:10 Received message from Master: op=Shutter serial=276512 13:50:10 Shutter LASER close 13:50:10 Received message from Camera: op=State serial=276514 13:50:10 GetSingleValue result=40 Value=cccccccc 13:50:10 SkyScan query 13:50:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:50:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:11 Parameters OK 13:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:11 Set A/D data flow result=40 13:50:11 Set A/D channel type result=40 13:50:11 Set A/D encoding result=40 13:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:11 Set channel filter=0.000000e+000 result=40 13:50:11 Config A/D Result=40 13:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:11 Get A/D filter: -9.255963e+061 result=40 13:50:11 Get A/D value=-858993460 result=40 13:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:11 Parameters OK 13:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:11 Set A/D data flow result=40 13:50:11 Set A/D channel type result=40 13:50:11 Set A/D encoding result=40 13:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:11 Set channel filter=0.000000e+000 result=40 13:50:11 Config A/D Result=40 13:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:11 Get A/D filter: -9.255963e+061 result=40 13:50:11 Get A/D value=-858993460 result=40 13:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:11 Aux= 13:50:11 Message to Camera, serial 276514 queued 13:50:48 Received message from Master: op=PointingHead serial=276527 13:50:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:50:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:50:48 Point started: ret=0 13:50:48 point_skyscan result=0 13:50:49 Check angles 13:50:49 SkyScan query 13:50:49 SkyScan query done: ret=0 az=63.855<-4257 ze=-67.98<-16532 Statuses=0009 0009 13:50:49 Msec=0 True Az=63.855 Ze=-67.98 Az status=0009 Ze status=0009 13:50:50 Check angles 13:50:50 SkyScan query 13:50:50 SkyScan query done: ret=0 az=81.705<-5447 ze=-89.475<-17965 Statuses=0009 0009 13:50:50 Msec=750 True Az=81.705 Ze=-89.475 Az status=0009 Ze status=0009 13:50:50 Check angles 13:50:50 SkyScan query 13:50:51 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.37<-19358 Statuses=0009 0009 13:50:51 Msec=1500 True Az=99.105 Ze=-110.37 Az status=0009 Ze status=0009 13:50:51 Check angles 13:50:51 SkyScan query 13:50:52 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.265<-20751 Statuses=0009 0009 13:50:52 Msec=2250 True Az=116.55 Ze=-131.265 Az status=0009 Ze status=0009 13:50:52 Check angles 13:50:52 SkyScan query 13:50:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 13:50:52 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 13:50:53 Check angles 13:50:53 SkyScan query 13:50:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:50:53 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:50:53 Message to Master queued w/err=0: serial=276527 error=0 13:50:58 Received message from Master: op=Filter serial=276528 13:50:58 Color wheel filter change from 0 to 0 13:50:58 FLIGetFilterPos err=0 currentPosition=0 13:50:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:58 Filter is already there-color wheel unchanged 13:50:58 Received message from Master: op=Shutter serial=276529 13:50:58 Shutter LASER close 13:50:58 Received message from Camera: op=State serial=276531 13:50:58 GetSingleValue result=40 Value=cccccccc 13:50:58 SkyScan query 13:50:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:50:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:59 Parameters OK 13:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:59 Set A/D data flow result=40 13:50:59 Set A/D channel type result=40 13:50:59 Set A/D encoding result=40 13:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:59 Set channel filter=0.000000e+000 result=40 13:50:59 Config A/D Result=40 13:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:59 Get A/D filter: -9.255963e+061 result=40 13:50:59 Get A/D value=-858993460 result=40 13:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:59 Parameters OK 13:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:59 Set A/D data flow result=40 13:50:59 Set A/D channel type result=40 13:50:59 Set A/D encoding result=40 13:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:59 Set channel filter=0.000000e+000 result=40 13:50:59 Config A/D Result=40 13:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:59 Get A/D filter: -9.255963e+061 result=40 13:50:59 Get A/D value=-858993460 result=40 13:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:59 Aux= 13:50:59 Message to Camera, serial 276531 queued 13:51:36 Received message from Master: op=PointingHead serial=276544 13:51:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:51:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:51:36 Point started: ret=0 13:51:36 point_skyscan result=0 13:51:37 Check angles 13:51:37 SkyScan query 13:51:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 13:51:37 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 13:51:38 Check angles 13:51:38 SkyScan query 13:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:51:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:51:38 Message to Master queued w/err=0: serial=276544 error=0 13:51:43 Received message from Master: op=Filter serial=276545 13:51:43 Color wheel filter change from 0 to 0 13:51:43 FLIGetFilterPos err=0 currentPosition=0 13:51:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:43 Filter is already there-color wheel unchanged 13:51:43 Received message from Master: op=Shutter serial=276546 13:51:43 Shutter LASER open 13:51:44 Received message from Camera: op=State serial=276548 13:51:44 GetSingleValue result=40 Value=cccccccc 13:51:44 SkyScan query 13:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:51:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:44 Parameters OK 13:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:44 Set A/D data flow result=40 13:51:44 Set A/D channel type result=40 13:51:44 Set A/D encoding result=40 13:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:44 Set channel filter=0.000000e+000 result=40 13:51:44 Config A/D Result=40 13:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:44 Get A/D filter: -9.255963e+061 result=40 13:51:44 Get A/D value=-858993460 result=40 13:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:44 Parameters OK 13:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:44 Set A/D data flow result=40 13:51:44 Set A/D channel type result=40 13:51:44 Set A/D encoding result=40 13:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:44 Set channel filter=0.000000e+000 result=40 13:51:44 Config A/D Result=40 13:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:44 Get A/D filter: -9.255963e+061 result=40 13:51:44 Get A/D value=-858993460 result=40 13:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:44 Aux= 13:51:44 Message to Camera, serial 276548 queued 13:51:53 Received message from Master: op=Shutter serial=276558 13:51:53 Shutter LASER close 13:51:53 Received message from Master: op=PointingHead serial=276562 13:51:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:51:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:51:54 Point started: ret=0 13:51:54 point_skyscan result=0 13:51:54 Check angles 13:51:54 SkyScan query 13:51:55 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.175<-21545 Statuses=0009 0009 13:51:55 Msec=0 True Az=136.11 Ze=-143.175 Az status=0009 Ze status=0009 13:51:55 Check angles 13:51:55 SkyScan query 13:51:56 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.785<-20119 Statuses=0009 0009 13:51:56 Msec=750 True Az=153.96 Ze=-121.785 Az status=0009 Ze status=0009 13:51:56 Check angles 13:51:56 SkyScan query 13:51:56 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.74<-18716 Statuses=0009 0009 13:51:56 Msec=1500 True Az=171.405 Ze=-100.74 Az status=0009 Ze status=0009 13:51:57 Check angles 13:51:57 SkyScan query 13:51:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.875<-17325 Statuses=0008 0009 13:51:57 Msec=2250 True Az=175.995 Ze=-79.875 Az status=0008 Ze status=0009 13:51:57 Check angles 13:51:57 SkyScan query 13:51:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.86<-15924 Statuses=0008 0009 13:51:58 Msec=3000 True Az=175.995 Ze=-58.86 Az status=0008 Ze status=0009 13:51:58 Check angles 13:51:58 SkyScan query 13:51:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:51:59 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:51:59 Message to Master queued w/err=0: serial=276562 error=0 13:52:04 Received message from Master: op=Filter serial=276563 13:52:04 Color wheel filter change from 0 to 0 13:52:04 FLIGetFilterPos err=0 currentPosition=0 13:52:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:04 Filter is already there-color wheel unchanged 13:52:04 Received message from Master: op=Shutter serial=276564 13:52:04 Shutter LASER close 13:52:04 Received message from Camera: op=State serial=276566 13:52:04 GetSingleValue result=40 Value=cccccccc 13:52:04 SkyScan query 13:52:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:52:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:05 Parameters OK 13:52:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:05 Set A/D data flow result=40 13:52:05 Set A/D channel type result=40 13:52:05 Set A/D encoding result=40 13:52:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:05 Set channel filter=0.000000e+000 result=40 13:52:05 Config A/D Result=40 13:52:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:05 Get A/D filter: -9.255963e+061 result=40 13:52:05 Get A/D value=-858993460 result=40 13:52:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:05 Parameters OK 13:52:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:05 Set A/D data flow result=40 13:52:05 Set A/D channel type result=40 13:52:05 Set A/D encoding result=40 13:52:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:05 Set channel filter=0.000000e+000 result=40 13:52:05 Config A/D Result=40 13:52:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:05 Get A/D filter: -9.255963e+061 result=40 13:52:05 Get A/D value=-858993460 result=40 13:52:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:05 Aux= 13:52:05 Message to Camera, serial 276566 queued 13:52:41 Received message from Master: op=PointingHead serial=276579 13:52:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:52:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:52:42 Point started: ret=0 13:52:42 point_skyscan result=0 13:52:42 Check angles 13:52:42 SkyScan query 13:52:43 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.15<-13410 Statuses=0009 0009 13:52:43 Msec=0 True Az=152.58 Ze=-21.15 Az status=0009 Ze status=0009 13:52:43 Check angles 13:52:43 SkyScan query 13:52:44 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.225<-12015 Statuses=0009 0009 13:52:44 Msec=750 True Az=135.09 Ze=-0.225 Az status=0009 Ze status=0009 13:52:44 Check angles 13:52:44 SkyScan query 13:52:45 SkyScan query done: ret=0 az=117.585<-7839 ze=20.76<-10616 Statuses=0009 0009 13:52:45 Msec=1500 True Az=117.585 Ze=20.76 Az status=0009 Ze status=0009 13:52:45 Check angles 13:52:45 SkyScan query 13:52:45 SkyScan query done: ret=0 az=100.185<-6679 ze=41.67<-9222 Statuses=0009 0009 13:52:45 Msec=2250 True Az=100.185 Ze=41.67 Az status=0009 Ze status=0009 13:52:45 Check angles 13:52:45 SkyScan query 13:52:46 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:52:46 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:52:46 Check angles 13:52:46 SkyScan query 13:52:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:52:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:52:47 Message to Master queued w/err=0: serial=276579 error=0 13:52:52 Received message from Master: op=Filter serial=276580 13:52:52 Color wheel filter change from 0 to 0 13:52:52 FLIGetFilterPos err=0 currentPosition=0 13:52:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:52 Filter is already there-color wheel unchanged 13:52:52 Received message from Master: op=Shutter serial=276581 13:52:52 Shutter LASER close 13:52:52 Received message from Camera: op=State serial=276583 13:52:52 GetSingleValue result=40 Value=cccccccc 13:52:52 SkyScan query 13:52:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:52:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:53 Parameters OK 13:52:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:53 Set A/D data flow result=40 13:52:53 Set A/D channel type result=40 13:52:53 Set A/D encoding result=40 13:52:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:53 Set channel filter=0.000000e+000 result=40 13:52:53 Config A/D Result=40 13:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:53 Get A/D filter: -9.255963e+061 result=40 13:52:53 Get A/D value=-858993460 result=40 13:52:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:53 Parameters OK 13:52:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:53 Set A/D data flow result=40 13:52:53 Set A/D channel type result=40 13:52:53 Set A/D encoding result=40 13:52:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:53 Set channel filter=0.000000e+000 result=40 13:52:53 Config A/D Result=40 13:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:53 Get A/D filter: -9.255963e+061 result=40 13:52:53 Get A/D value=-858993460 result=40 13:52:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:53 Aux= 13:52:53 Message to Camera, serial 276583 queued 13:53:29 Received message from Master: op=PointingHead serial=276595 13:53:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:53:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:53:29 Point started: ret=0 13:53:29 point_skyscan result=0 13:53:30 Check angles 13:53:30 SkyScan query 13:53:30 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 13:53:30 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 13:53:30 Check angles 13:53:30 SkyScan query 13:53:31 SkyScan query done: ret=0 az=127.17<-8478 ze=38.505<-9433 Statuses=0009 0008 13:53:31 Msec=750 True Az=127.17 Ze=38.505 Az status=0009 Ze status=0008 13:53:31 Check angles 13:53:31 SkyScan query 13:53:32 SkyScan query done: ret=0 az=144.885<-9659 ze=38.505<-9433 Statuses=0009 0008 13:53:32 Msec=1500 True Az=144.885 Ze=38.505 Az status=0009 Ze status=0008 13:53:32 Check angles 13:53:32 SkyScan query 13:53:32 SkyScan query done: ret=0 az=162.39<-10826 ze=38.505<-9433 Statuses=0009 0008 13:53:32 Msec=2250 True Az=162.39 Ze=38.505 Az status=0009 Ze status=0008 13:53:33 Check angles 13:53:33 SkyScan query 13:53:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:53:33 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:53:33 Check angles 13:53:33 SkyScan query 13:53:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:53:34 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:53:34 Message to Master queued w/err=0: serial=276595 error=0 13:53:39 Received message from Master: op=Filter serial=276596 13:53:39 Color wheel filter change from 0 to 0 13:53:39 FLIGetFilterPos err=0 currentPosition=0 13:53:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:39 Filter is already there-color wheel unchanged 13:53:39 Received message from Master: op=Shutter serial=276597 13:53:39 Shutter LASER close 13:53:39 Received message from Camera: op=State serial=276599 13:53:39 GetSingleValue result=40 Value=cccccccc 13:53:39 SkyScan query 13:53:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:53:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:40 Parameters OK 13:53:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:40 Set A/D data flow result=40 13:53:40 Set A/D channel type result=40 13:53:40 Set A/D encoding result=40 13:53:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:40 Set channel filter=0.000000e+000 result=40 13:53:40 Config A/D Result=40 13:53:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:40 Get A/D filter: -9.255963e+061 result=40 13:53:40 Get A/D value=-858993460 result=40 13:53:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:40 Parameters OK 13:53:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:40 Set A/D data flow result=40 13:53:40 Set A/D channel type result=40 13:53:40 Set A/D encoding result=40 13:53:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:40 Set channel filter=0.000000e+000 result=40 13:53:40 Config A/D Result=40 13:53:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:40 Get A/D filter: -9.255963e+061 result=40 13:53:40 Get A/D value=-858993460 result=40 13:53:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:40 Aux= 13:53:40 Message to Camera, serial 276599 queued 13:54:17 Received message from Master: op=PointingHead serial=276612 13:54:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:54:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:54:17 Point started: ret=0 13:54:17 point_skyscan result=0 13:54:18 Check angles 13:54:18 SkyScan query 13:54:18 SkyScan query done: ret=0 az=153.06<-10204 ze=8.745<-11417 Statuses=0009 0009 13:54:18 Msec=0 True Az=153.06 Ze=8.745 Az status=0009 Ze status=0009 13:54:18 Check angles 13:54:18 SkyScan query 13:54:19 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.24<-12816 Statuses=0009 0009 13:54:19 Msec=750 True Az=135.6 Ze=-12.24 Az status=0009 Ze status=0009 13:54:19 Check angles 13:54:19 SkyScan query 13:54:20 SkyScan query done: ret=0 az=118.08<-7872 ze=-33.165<-14211 Statuses=0009 0009 13:54:20 Msec=1500 True Az=118.08 Ze=-33.165 Az status=0009 Ze status=0009 13:54:20 Check angles 13:54:20 SkyScan query 13:54:21 SkyScan query done: ret=0 az=100.68<-6712 ze=-51.54<-15436 Statuses=0009 0009 13:54:21 Msec=2250 True Az=100.68 Ze=-51.54 Az status=0009 Ze status=0009 13:54:21 Check angles 13:54:21 SkyScan query 13:54:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 13:54:21 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 13:54:21 Check angles 13:54:21 SkyScan query 13:54:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:54:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:54:22 Message to Master queued w/err=0: serial=276612 error=0 13:54:27 Received message from Master: op=Filter serial=276613 13:54:27 Color wheel filter change from 0 to 0 13:54:27 FLIGetFilterPos err=0 currentPosition=0 13:54:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:27 Filter is already there-color wheel unchanged 13:54:27 Received message from Master: op=Shutter serial=276614 13:54:27 Shutter LASER close 13:54:27 Received message from Camera: op=State serial=276616 13:54:27 GetSingleValue result=40 Value=cccccccc 13:54:27 SkyScan query 13:54:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:54:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:28 Parameters OK 13:54:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:28 Set A/D data flow result=40 13:54:28 Set A/D channel type result=40 13:54:28 Set A/D encoding result=40 13:54:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:28 Set channel filter=0.000000e+000 result=40 13:54:28 Config A/D Result=40 13:54:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:28 Get A/D filter: -9.255963e+061 result=40 13:54:28 Get A/D value=-858993460 result=40 13:54:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:28 Parameters OK 13:54:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:28 Set A/D data flow result=40 13:54:28 Set A/D channel type result=40 13:54:28 Set A/D encoding result=40 13:54:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:28 Set channel filter=0.000000e+000 result=40 13:54:28 Config A/D Result=40 13:54:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:28 Get A/D filter: -9.255963e+061 result=40 13:54:28 Get A/D value=-858993460 result=40 13:54:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:28 Aux= 13:54:28 Message to Camera, serial 276616 queued 13:55:05 Received message from Master: op=PointingHead serial=276629 13:55:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:55:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:55:05 Point started: ret=0 13:55:05 point_skyscan result=0 13:55:06 Check angles 13:55:06 SkyScan query 13:55:06 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.39<-17426 Statuses=0009 0009 13:55:06 Msec=0 True Az=109.185 Ze=-81.39 Az status=0009 Ze status=0009 13:55:07 Check angles 13:55:07 SkyScan query 13:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.36<-18824 Statuses=0008 0009 13:55:07 Msec=750 True Az=112.995 Ze=-102.36 Az status=0008 Ze status=0009 13:55:07 Check angles 13:55:07 SkyScan query 13:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.315<-20221 Statuses=0008 0009 13:55:08 Msec=1500 True Az=112.995 Ze=-123.315 Az status=0008 Ze status=0009 13:55:08 Check angles 13:55:08 SkyScan query 13:55:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 13:55:09 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 13:55:09 Check angles 13:55:09 SkyScan query 13:55:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.63<-23042 Statuses=0008 0009 13:55:09 Msec=3000 True Az=112.995 Ze=-165.63 Az status=0008 Ze status=0009 13:55:10 Check angles 13:55:10 SkyScan query 13:55:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:55:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:55:10 Message to Master queued w/err=0: serial=276629 error=0 13:55:15 Received message from Master: op=Filter serial=276630 13:55:15 Color wheel filter change from 0 to 0 13:55:15 FLIGetFilterPos err=0 currentPosition=0 13:55:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:15 Filter is already there-color wheel unchanged 13:55:15 Received message from Master: op=Shutter serial=276631 13:55:15 Shutter LASER open 13:55:15 Received message from Camera: op=State serial=276633 13:55:15 GetSingleValue result=40 Value=cccccccc 13:55:15 SkyScan query 13:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:55:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:16 Parameters OK 13:55:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:16 Set A/D data flow result=40 13:55:16 Set A/D channel type result=40 13:55:16 Set A/D encoding result=40 13:55:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:16 Set channel filter=0.000000e+000 result=40 13:55:16 Config A/D Result=40 13:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:16 Get A/D filter: -9.255963e+061 result=40 13:55:16 Get A/D value=-858993460 result=40 13:55:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:16 Parameters OK 13:55:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:16 Set A/D data flow result=40 13:55:16 Set A/D channel type result=40 13:55:16 Set A/D encoding result=40 13:55:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:16 Set channel filter=0.000000e+000 result=40 13:55:16 Config A/D Result=40 13:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:16 Get A/D filter: -9.255963e+061 result=40 13:55:16 Get A/D value=-858993460 result=40 13:55:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:16 Aux= 13:55:16 Message to Camera, serial 276633 queued 13:55:24 Received message from Master: op=Shutter serial=276643 13:55:24 Shutter LASER close 13:55:25 Received message from Master: op=PointingHead serial=276647 13:55:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:55:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:55:25 Point started: ret=0 13:55:25 point_skyscan result=0 13:55:26 Check angles 13:55:26 SkyScan query 13:55:27 SkyScan query done: ret=0 az=89.565<-5971 ze=156.915<-1539 Statuses=0009 0009 13:55:27 Msec=0 True Az=89.565 Ze=156.915 Az status=0009 Ze status=0009 13:55:27 Check angles 13:55:27 SkyScan query 13:55:27 SkyScan query done: ret=0 az=71.745<-4783 ze=135.525<-2965 Statuses=0009 0009 13:55:27 Msec=750 True Az=71.745 Ze=135.525 Az status=0009 Ze status=0009 13:55:28 Check angles 13:55:28 SkyScan query 13:55:28 SkyScan query done: ret=0 az=54.285<-3619 ze=114.525<-4365 Statuses=0009 0009 13:55:28 Msec=1500 True Az=54.285 Ze=114.525 Az status=0009 Ze status=0009 13:55:28 Check angles 13:55:28 SkyScan query 13:55:29 SkyScan query done: ret=0 az=40.98<-2732 ze=93.645<-5757 Statuses=0009 0009 13:55:29 Msec=2250 True Az=40.98 Ze=93.645 Az status=0009 Ze status=0009 13:55:29 Check angles 13:55:29 SkyScan query 13:55:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 13:55:30 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 13:55:30 Check angles [UTC 2018-12-19 13:55:30] 13:55:30 SkyScan query 13:55:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.69<-8554 Statuses=0008 0009 13:55:30 Msec=3750 True Az=40.995 Ze=51.69 Az status=0008 Ze status=0009 13:55:31 Check angles 13:55:31 SkyScan query 13:55:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:55:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:55:31 Message to Master queued w/err=0: serial=276647 error=0 13:55:36 Received message from Master: op=Filter serial=276648 13:55:36 Color wheel filter change from 0 to 0 13:55:36 FLIGetFilterPos err=0 currentPosition=0 13:55:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:36 Filter is already there-color wheel unchanged 13:55:36 Received message from Master: op=Shutter serial=276649 13:55:36 Shutter LASER close 13:55:36 Received message from Camera: op=State serial=276651 13:55:36 GetSingleValue result=40 Value=cccccccc 13:55:36 SkyScan query 13:55:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:55:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:37 Parameters OK 13:55:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:37 Set A/D data flow result=40 13:55:37 Set A/D channel type result=40 13:55:37 Set A/D encoding result=40 13:55:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:37 Set channel filter=0.000000e+000 result=40 13:55:37 Config A/D Result=40 13:55:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:37 Get A/D filter: -9.255963e+061 result=40 13:55:37 Get A/D value=-858993460 result=40 13:55:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:37 Parameters OK 13:55:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:37 Set A/D data flow result=40 13:55:37 Set A/D channel type result=40 13:55:37 Set A/D encoding result=40 13:55:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:37 Set channel filter=0.000000e+000 result=40 13:55:37 Config A/D Result=40 13:55:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:37 Get A/D filter: -9.255963e+061 result=40 13:55:37 Get A/D value=-858993460 result=40 13:55:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:37 Aux= 13:55:37 Message to Camera, serial 276651 queued [UTC 2018-12-19 13:55:52] 13:56:14 Received message from Master: op=PointingHead serial=276664 13:56:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:56:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:56:14 Point started: ret=0 13:56:14 point_skyscan result=0 13:56:15 Check angles 13:56:15 SkyScan query 13:56:16 SkyScan query done: ret=0 az=64.485<-4299 ze=66.54<-7564 Statuses=0009 0008 13:56:16 Msec=0 True Az=64.485 Ze=66.54 Az status=0009 Ze status=0008 13:56:16 Check angles 13:56:16 SkyScan query 13:56:16 SkyScan query done: ret=0 az=82.095<-5473 ze=66.51<-7566 Statuses=0009 0008 13:56:16 Msec=750 True Az=82.095 Ze=66.51 Az status=0009 Ze status=0008 13:56:16 Check angles 13:56:16 SkyScan query 13:56:17 SkyScan query done: ret=0 az=99.93<-6662 ze=66.495<-7567 Statuses=0009 0008 13:56:17 Msec=1500 True Az=99.93 Ze=66.495 Az status=0009 Ze status=0008 13:56:17 Check angles 13:56:17 SkyScan query 13:56:18 SkyScan query done: ret=0 az=117.45<-7830 ze=66.495<-7567 Statuses=0009 0008 13:56:18 Msec=2250 True Az=117.45 Ze=66.495 Az status=0009 Ze status=0008 13:56:18 Check angles 13:56:18 SkyScan query 13:56:19 SkyScan query done: ret=0 az=134.835<-8989 ze=66.495<-7567 Statuses=0009 0008 13:56:19 Msec=3000 True Az=134.835 Ze=66.495 Az status=0009 Ze status=0008 13:56:19 Check angles 13:56:19 SkyScan query 13:56:19 SkyScan query done: ret=0 az=152.175<-10145 ze=66.495<-7567 Statuses=0009 0008 13:56:19 Msec=3750 True Az=152.175 Ze=66.495 Az status=0009 Ze status=0008 13:56:19 Check angles 13:56:19 SkyScan query 13:56:20 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:56:20 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:56:20 Message to Master queued w/err=0: serial=276664 error=0 13:56:25 Received message from Master: op=Filter serial=276665 13:56:25 Color wheel filter change from 0 to 0 13:56:25 FLIGetFilterPos err=0 currentPosition=0 13:56:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:25 Filter is already there-color wheel unchanged 13:56:25 Received message from Master: op=Shutter serial=276666 13:56:25 Shutter LASER close 13:56:25 Received message from Camera: op=State serial=276668 13:56:25 GetSingleValue result=40 Value=cccccccc 13:56:25 SkyScan query 13:56:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:56:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:26 Parameters OK 13:56:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:26 Set A/D data flow result=40 13:56:26 Set A/D channel type result=40 13:56:26 Set A/D encoding result=40 13:56:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:26 Set channel filter=0.000000e+000 result=40 13:56:26 Config A/D Result=40 13:56:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:26 Get A/D filter: -9.255963e+061 result=40 13:56:26 Get A/D value=-858993460 result=40 13:56:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:26 Parameters OK 13:56:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:26 Set A/D data flow result=40 13:56:26 Set A/D channel type result=40 13:56:26 Set A/D encoding result=40 13:56:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:26 Set channel filter=0.000000e+000 result=40 13:56:26 Config A/D Result=40 13:56:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:26 Get A/D filter: -9.255963e+061 result=40 13:56:26 Get A/D value=-858993460 result=40 13:56:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:26 Aux= 13:56:26 Message to Camera, serial 276668 queued 13:57:03 Received message from Master: op=PointingHead serial=276681 13:57:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:57:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:57:03 Point started: ret=0 13:57:03 point_skyscan result=0 13:57:04 Check angles 13:57:04 SkyScan query 13:57:04 SkyScan query done: ret=0 az=134.82<-8988 ze=36.57<-9562 Statuses=0009 0009 13:57:04 Msec=0 True Az=134.82 Ze=36.57 Az status=0009 Ze status=0009 13:57:05 Check angles 13:57:05 SkyScan query 13:57:05 SkyScan query done: ret=0 az=117.36<-7824 ze=15.645<-10957 Statuses=0009 0009 13:57:05 Msec=750 True Az=117.36 Ze=15.645 Az status=0009 Ze status=0009 13:57:05 Check angles 13:57:05 SkyScan query 13:57:06 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.34<-12356 Statuses=0009 0009 13:57:06 Msec=1500 True Az=99.975 Ze=-5.34 Az status=0009 Ze status=0009 13:57:06 Check angles 13:57:06 SkyScan query 13:57:07 SkyScan query done: ret=0 az=82.5<-5500 ze=-26.31<-13754 Statuses=0009 0009 13:57:07 Msec=2250 True Az=82.5 Ze=-26.31 Az status=0009 Ze status=0009 13:57:07 Check angles 13:57:07 SkyScan query 13:57:07 SkyScan query done: ret=0 az=64.98<-4332 ze=-38.58<-14572 Statuses=0009 0008 13:57:07 Msec=3000 True Az=64.98 Ze=-38.58 Az status=0009 Ze status=0008 13:57:08 Check angles 13:57:08 SkyScan query 13:57:08 SkyScan query done: ret=0 az=47.475<-3165 ze=-38.52<-14568 Statuses=0009 0008 13:57:08 Msec=3750 True Az=47.475 Ze=-38.52 Az status=0009 Ze status=0008 13:57:08 Check angles 13:57:08 SkyScan query 13:57:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:57:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:57:09 Message to Master queued w/err=0: serial=276681 error=0 13:57:14 Received message from Master: op=Filter serial=276682 13:57:14 Color wheel filter change from 0 to 0 13:57:14 FLIGetFilterPos err=0 currentPosition=0 13:57:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:14 Filter is already there-color wheel unchanged 13:57:14 Received message from Master: op=Shutter serial=276683 13:57:14 Shutter LASER close 13:57:14 Received message from Camera: op=State serial=276685 13:57:14 GetSingleValue result=40 Value=cccccccc 13:57:14 SkyScan query 13:57:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:57:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:15 Parameters OK 13:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:15 Set A/D data flow result=40 13:57:15 Set A/D channel type result=40 13:57:15 Set A/D encoding result=40 13:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:15 Set channel filter=0.000000e+000 result=40 13:57:15 Config A/D Result=40 13:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:15 Get A/D filter: -9.255963e+061 result=40 13:57:15 Get A/D value=-858993460 result=40 13:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:15 Parameters OK 13:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:15 Set A/D data flow result=40 13:57:15 Set A/D channel type result=40 13:57:15 Set A/D encoding result=40 13:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:15 Set channel filter=0.000000e+000 result=40 13:57:15 Config A/D Result=40 13:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:15 Get A/D filter: -9.255963e+061 result=40 13:57:15 Get A/D value=-858993460 result=40 13:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:15 Aux= 13:57:15 Message to Camera, serial 276685 queued 13:57:51 Received message from Master: op=PointingHead serial=276698 13:57:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:57:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:57:52 Point started: ret=0 13:57:52 point_skyscan result=0 13:57:53 Check angles 13:57:53 SkyScan query 13:57:53 SkyScan query done: ret=0 az=63.765<-4251 ze=-67.995<-16533 Statuses=0009 0009 13:57:53 Msec=0 True Az=63.765 Ze=-67.995 Az status=0009 Ze status=0009 13:57:53 Check angles 13:57:53 SkyScan query 13:57:54 SkyScan query done: ret=0 az=81.105<-5407 ze=-88.95<-17930 Statuses=0009 0009 13:57:54 Msec=750 True Az=81.105 Ze=-88.95 Az status=0009 Ze status=0009 13:57:54 Check angles 13:57:54 SkyScan query 13:57:55 SkyScan query done: ret=0 az=98.595<-6573 ze=-109.89<-19326 Statuses=0009 0009 13:57:55 Msec=1500 True Az=98.595 Ze=-109.89 Az status=0009 Ze status=0009 13:57:55 Check angles 13:57:55 SkyScan query 13:57:55 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.295<-20753 Statuses=0009 0009 13:57:55 Msec=2250 True Az=116.52 Ze=-131.295 Az status=0009 Ze status=0009 13:57:56 Check angles 13:57:56 SkyScan query 13:57:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 13:57:56 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 13:57:56 Check angles 13:57:56 SkyScan query 13:57:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:57:57 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:57:57 Message to Master queued w/err=0: serial=276698 error=0 13:58:02 Received message from Master: op=Filter serial=276699 13:58:02 Color wheel filter change from 0 to 0 13:58:02 FLIGetFilterPos err=0 currentPosition=0 13:58:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:02 Filter is already there-color wheel unchanged 13:58:02 Received message from Master: op=Shutter serial=276700 13:58:02 Shutter LASER close 13:58:02 Received message from Camera: op=State serial=276702 13:58:02 GetSingleValue result=40 Value=cccccccc 13:58:02 SkyScan query 13:58:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:58:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:03 Parameters OK 13:58:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:03 Set A/D data flow result=40 13:58:03 Set A/D channel type result=40 13:58:03 Set A/D encoding result=40 13:58:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:03 Set channel filter=0.000000e+000 result=40 13:58:03 Config A/D Result=40 13:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:03 Get A/D filter: -9.255963e+061 result=40 13:58:03 Get A/D value=-858993460 result=40 13:58:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:03 Parameters OK 13:58:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:03 Set A/D data flow result=40 13:58:03 Set A/D channel type result=40 13:58:03 Set A/D encoding result=40 13:58:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:03 Set channel filter=0.000000e+000 result=40 13:58:03 Config A/D Result=40 13:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:03 Get A/D filter: -9.255963e+061 result=40 13:58:03 Get A/D value=-858993460 result=40 13:58:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:03 Aux= 13:58:03 Message to Camera, serial 276702 queued 13:58:39 Received message from Master: op=PointingHead serial=276714 13:58:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:58:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:58:39 Point started: ret=0 13:58:39 point_skyscan result=0 13:58:40 Check angles 13:58:40 SkyScan query 13:58:40 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 13:58:40 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 13:58:40 Check angles 13:58:40 SkyScan query 13:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:58:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:58:41 Message to Master queued w/err=0: serial=276714 error=0 13:58:46 Received message from Master: op=Filter serial=276715 13:58:46 Color wheel filter change from 0 to 0 13:58:46 FLIGetFilterPos err=0 currentPosition=0 13:58:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:46 Filter is already there-color wheel unchanged 13:58:46 Received message from Master: op=Shutter serial=276716 13:58:46 Shutter LASER open 13:58:46 Received message from Camera: op=State serial=276718 13:58:46 GetSingleValue result=40 Value=cccccccc 13:58:46 SkyScan query 13:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:58:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:47 Parameters OK 13:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:47 Set A/D data flow result=40 13:58:47 Set A/D channel type result=40 13:58:47 Set A/D encoding result=40 13:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:47 Set channel filter=0.000000e+000 result=40 13:58:47 Config A/D Result=40 13:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:47 Get A/D filter: -9.255963e+061 result=40 13:58:47 Get A/D value=-858993460 result=40 13:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:47 Parameters OK 13:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:47 Set A/D data flow result=40 13:58:47 Set A/D channel type result=40 13:58:47 Set A/D encoding result=40 13:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:47 Set channel filter=0.000000e+000 result=40 13:58:47 Config A/D Result=40 13:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:47 Get A/D filter: -9.255963e+061 result=40 13:58:47 Get A/D value=-858993460 result=40 13:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:47 Aux= 13:58:47 Message to Camera, serial 276718 queued 13:58:55 Received message from Master: op=Shutter serial=276728 13:58:55 Shutter LASER close 13:58:56 Received message from Master: op=PointingHead serial=276732 13:58:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:58:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:58:56 Point started: ret=0 13:58:56 point_skyscan result=0 13:58:57 Check angles 13:58:57 SkyScan query 13:58:58 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.1<-21540 Statuses=0009 0009 13:58:58 Msec=0 True Az=136.11 Ze=-143.1 Az status=0009 Ze status=0009 13:58:58 Check angles 13:58:58 SkyScan query 13:58:58 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.755<-20117 Statuses=0009 0009 13:58:58 Msec=750 True Az=153.795 Ze=-121.755 Az status=0009 Ze status=0009 13:58:59 Check angles 13:58:59 SkyScan query 13:58:59 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.235<-18749 Statuses=0009 0009 13:58:59 Msec=1500 True Az=171.105 Ze=-101.235 Az status=0009 Ze status=0009 13:58:59 Check angles 13:58:59 SkyScan query 13:59:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.83<-17322 Statuses=0008 0009 13:59:00 Msec=2250 True Az=175.995 Ze=-79.83 Az status=0008 Ze status=0009 13:59:00 Check angles 13:59:00 SkyScan query 13:59:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.815<-15921 Statuses=0008 0009 13:59:01 Msec=3000 True Az=175.995 Ze=-58.815 Az status=0008 Ze status=0009 13:59:01 Check angles 13:59:01 SkyScan query 13:59:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:59:01 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:59:01 Message to Master queued w/err=0: serial=276732 error=0 13:59:06 Received message from Master: op=Filter serial=276733 13:59:06 Color wheel filter change from 0 to 0 13:59:06 FLIGetFilterPos err=0 currentPosition=0 13:59:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:06 Filter is already there-color wheel unchanged 13:59:07 Received message from Master: op=Shutter serial=276734 13:59:07 Shutter LASER close 13:59:07 Received message from Camera: op=State serial=276736 13:59:07 GetSingleValue result=40 Value=cccccccc 13:59:07 SkyScan query 13:59:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:59:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:07 Parameters OK 13:59:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:07 Set A/D data flow result=40 13:59:07 Set A/D channel type result=40 13:59:07 Set A/D encoding result=40 13:59:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:07 Set channel filter=0.000000e+000 result=40 13:59:07 Config A/D Result=40 13:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:07 Get A/D filter: -9.255963e+061 result=40 13:59:07 Get A/D value=-858993460 result=40 13:59:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:07 Parameters OK 13:59:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:07 Set A/D data flow result=40 13:59:07 Set A/D channel type result=40 13:59:07 Set A/D encoding result=40 13:59:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:07 Set channel filter=0.000000e+000 result=40 13:59:07 Config A/D Result=40 13:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:07 Get A/D filter: -9.255963e+061 result=40 13:59:07 Get A/D value=-858993460 result=40 13:59:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:07 Aux= 13:59:07 Message to Camera, serial 276736 queued 13:59:44 Received message from Master: op=PointingHead serial=276749 13:59:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:59:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:59:45 Point started: ret=0 13:59:45 point_skyscan result=0 13:59:45 Check angles 13:59:45 SkyScan query 13:59:46 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.81<-13454 Statuses=0009 0009 13:59:46 Msec=0 True Az=152.955 Ze=-21.81 Az status=0009 Ze status=0009 13:59:46 Check angles 13:59:46 SkyScan query 13:59:47 SkyScan query done: ret=0 az=135.24<-9016 ze=-0.39<-12026 Statuses=0009 0009 13:59:47 Msec=750 True Az=135.24 Ze=-0.39 Az status=0009 Ze status=0009 13:59:47 Check angles 13:59:47 SkyScan query 13:59:47 SkyScan query done: ret=0 az=117.3<-7820 ze=21.06<-10596 Statuses=0009 0009 13:59:47 Msec=1500 True Az=117.3 Ze=21.06 Az status=0009 Ze status=0009 13:59:48 Check angles 13:59:48 SkyScan query 13:59:48 SkyScan query done: ret=0 az=99.945<-6663 ze=41.94<-9204 Statuses=0009 0009 13:59:48 Msec=2250 True Az=99.945 Ze=41.94 Az status=0009 Ze status=0009 13:59:48 Check angles 13:59:48 SkyScan query 13:59:49 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:59:49 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:59:49 Check angles 13:59:49 SkyScan query 13:59:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:59:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:59:50 Message to Master queued w/err=0: serial=276749 error=0 13:59:55 Received message from Master: op=Filter serial=276750 13:59:55 Color wheel filter change from 0 to 0 13:59:55 FLIGetFilterPos err=0 currentPosition=0 13:59:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:55 Filter is already there-color wheel unchanged 13:59:55 Received message from Master: op=Shutter serial=276751 13:59:55 Shutter LASER close 13:59:55 Received message from Camera: op=State serial=276753 13:59:55 GetSingleValue result=40 Value=cccccccc 13:59:55 SkyScan query 13:59:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:59:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:56 Parameters OK 13:59:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:56 Set A/D data flow result=40 13:59:56 Set A/D channel type result=40 13:59:56 Set A/D encoding result=40 13:59:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:56 Set channel filter=0.000000e+000 result=40 13:59:56 Config A/D Result=40 13:59:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:56 Get A/D filter: -9.255963e+061 result=40 13:59:56 Get A/D value=-858993460 result=40 13:59:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:56 Parameters OK 13:59:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:56 Set A/D data flow result=40 13:59:56 Set A/D channel type result=40 13:59:56 Set A/D encoding result=40 13:59:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:56 Set channel filter=0.000000e+000 result=40 13:59:56 Config A/D Result=40 13:59:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:56 Get A/D filter: -9.255963e+061 result=40 13:59:56 Get A/D value=-858993460 result=40 13:59:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:56 Aux= 13:59:56 Message to Camera, serial 276753 queued 14:00:32 Received message from Master: op=PointingHead serial=276766 14:00:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:00:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:00:33 Point started: ret=0 14:00:33 point_skyscan result=0 14:00:33 Check angles 14:00:33 SkyScan query 14:00:34 SkyScan query done: ret=0 az=108.795<-7253 ze=38.475<-9435 Statuses=0009 0008 14:00:34 Msec=0 True Az=108.795 Ze=38.475 Az status=0009 Ze status=0008 14:00:34 Check angles 14:00:34 SkyScan query 14:00:35 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 14:00:35 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 14:00:35 Check angles 14:00:35 SkyScan query 14:00:36 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 14:00:36 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 14:00:36 Check angles 14:00:36 SkyScan query 14:00:36 SkyScan query done: ret=0 az=161.505<-10767 ze=38.505<-9433 Statuses=0009 0008 14:00:36 Msec=2250 True Az=161.505 Ze=38.505 Az status=0009 Ze status=0008 14:00:36 Check angles 14:00:36 SkyScan query 14:00:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:00:37 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:00:37 Check angles 14:00:37 SkyScan query 14:00:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:00:38 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:00:38 Message to Master queued w/err=0: serial=276766 error=0 14:00:43 Received message from Master: op=Filter serial=276767 14:00:43 Color wheel filter change from 0 to 0 14:00:43 FLIGetFilterPos err=0 currentPosition=0 14:00:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:43 Filter is already there-color wheel unchanged 14:00:43 Received message from Master: op=Shutter serial=276768 14:00:43 Shutter LASER close 14:00:43 Received message from Camera: op=State serial=276770 14:00:43 GetSingleValue result=40 Value=cccccccc 14:00:43 SkyScan query 14:00:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:00:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:44 Parameters OK 14:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:44 Set A/D data flow result=40 14:00:44 Set A/D channel type result=40 14:00:44 Set A/D encoding result=40 14:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:44 Set channel filter=0.000000e+000 result=40 14:00:44 Config A/D Result=40 14:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:44 Get A/D filter: -9.255963e+061 result=40 14:00:44 Get A/D value=-858993460 result=40 14:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:44 Parameters OK 14:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:44 Set A/D data flow result=40 14:00:44 Set A/D channel type result=40 14:00:44 Set A/D encoding result=40 14:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:44 Set channel filter=0.000000e+000 result=40 14:00:44 Config A/D Result=40 14:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:44 Get A/D filter: -9.255963e+061 result=40 14:00:44 Get A/D value=-858993460 result=40 14:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:44 Aux= 14:00:44 Message to Camera, serial 276770 queued 14:01:20 Received message from Master: op=PointingHead serial=276783 14:01:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:01:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:01:21 Point started: ret=0 14:01:21 point_skyscan result=0 14:01:22 Check angles 14:01:22 SkyScan query 14:01:22 SkyScan query done: ret=0 az=152.91<-10194 ze=8.64<-11424 Statuses=0009 0009 14:01:22 Msec=0 True Az=152.91 Ze=8.64 Az status=0009 Ze status=0009 14:01:22 Check angles 14:01:22 SkyScan query 14:01:23 SkyScan query done: ret=0 az=135.51<-9034 ze=-12.3<-12820 Statuses=0009 0009 14:01:23 Msec=750 True Az=135.51 Ze=-12.3 Az status=0009 Ze status=0009 14:01:23 Check angles 14:01:23 SkyScan query 14:01:24 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.255<-14217 Statuses=0009 0009 14:01:24 Msec=1500 True Az=118.02 Ze=-33.255 Az status=0009 Ze status=0009 14:01:24 Check angles 14:01:24 SkyScan query 14:01:24 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.54<-15436 Statuses=0009 0009 14:01:24 Msec=2250 True Az=100.62 Ze=-51.54 Az status=0009 Ze status=0009 14:01:25 Check angles 14:01:25 SkyScan query 14:01:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 14:01:25 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 14:01:25 Check angles 14:01:25 SkyScan query 14:01:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:01:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:01:26 Message to Master queued w/err=0: serial=276783 error=0 14:01:31 Received message from Master: op=Filter serial=276784 14:01:31 Color wheel filter change from 0 to 0 14:01:31 FLIGetFilterPos err=0 currentPosition=0 14:01:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:31 Filter is already there-color wheel unchanged 14:01:31 Received message from Master: op=Shutter serial=276785 14:01:31 Shutter LASER close 14:01:31 Received message from Camera: op=State serial=276787 14:01:31 GetSingleValue result=40 Value=cccccccc 14:01:31 SkyScan query 14:01:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:01:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:32 Parameters OK 14:01:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:32 Set A/D data flow result=40 14:01:32 Set A/D channel type result=40 14:01:32 Set A/D encoding result=40 14:01:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:32 Set channel filter=0.000000e+000 result=40 14:01:32 Config A/D Result=40 14:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:32 Get A/D filter: -9.255963e+061 result=40 14:01:32 Get A/D value=-858993460 result=40 14:01:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:32 Parameters OK 14:01:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:32 Set A/D data flow result=40 14:01:32 Set A/D channel type result=40 14:01:32 Set A/D encoding result=40 14:01:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:32 Set channel filter=0.000000e+000 result=40 14:01:32 Config A/D Result=40 14:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:32 Get A/D filter: -9.255963e+061 result=40 14:01:32 Get A/D value=-858993460 result=40 14:01:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:32 Aux= 14:01:32 Message to Camera, serial 276787 queued 14:02:08 Received message from Master: op=PointingHead serial=276800 14:02:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:02:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:02:09 Point started: ret=0 14:02:09 point_skyscan result=0 14:02:10 Check angles 14:02:10 SkyScan query 14:02:10 SkyScan query done: ret=0 az=109.26<-7284 ze=-81.69<-17446 Statuses=0009 0009 14:02:10 Msec=0 True Az=109.26 Ze=-81.69 Az status=0009 Ze status=0009 14:02:10 Check angles 14:02:10 SkyScan query 14:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 14:02:11 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 14:02:11 Check angles 14:02:11 SkyScan query 14:02:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 14:02:12 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 14:02:12 Check angles 14:02:12 SkyScan query 14:02:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 14:02:12 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 14:02:13 Check angles 14:02:13 SkyScan query 14:02:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 14:02:13 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 14:02:13 Check angles 14:02:13 SkyScan query 14:02:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:02:14 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:02:14 Message to Master queued w/err=0: serial=276800 error=0 14:02:19 Received message from Master: op=Filter serial=276801 14:02:19 Color wheel filter change from 0 to 0 14:02:19 FLIGetFilterPos err=0 currentPosition=0 14:02:19 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:19 Filter is already there-color wheel unchanged 14:02:19 Received message from Master: op=Shutter serial=276802 14:02:19 Shutter LASER open 14:02:19 Received message from Camera: op=State serial=276804 14:02:19 GetSingleValue result=40 Value=cccccccc 14:02:19 SkyScan query 14:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:02:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:20 Parameters OK 14:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:20 Set A/D data flow result=40 14:02:20 Set A/D channel type result=40 14:02:20 Set A/D encoding result=40 14:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:20 Set channel filter=0.000000e+000 result=40 14:02:20 Config A/D Result=40 14:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:20 Get A/D filter: -9.255963e+061 result=40 14:02:20 Get A/D value=-858993460 result=40 14:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:20 Parameters OK 14:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:20 Set A/D data flow result=40 14:02:20 Set A/D channel type result=40 14:02:20 Set A/D encoding result=40 14:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:20 Set channel filter=0.000000e+000 result=40 14:02:20 Config A/D Result=40 14:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:20 Get A/D filter: -9.255963e+061 result=40 14:02:20 Get A/D value=-858993460 result=40 14:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:20 Aux= 14:02:20 Message to Camera, serial 276804 queued 14:02:28 Received message from Master: op=Shutter serial=276814 14:02:28 Shutter LASER close 14:02:29 Received message from Master: op=PointingHead serial=276818 14:02:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:02:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:02:29 Point started: ret=0 14:02:29 point_skyscan result=0 14:02:30 Check angles 14:02:30 SkyScan query 14:02:30 SkyScan query done: ret=0 az=89.625<-5975 ze=156.825<-1545 Statuses=0009 0009 14:02:30 Msec=0 True Az=89.625 Ze=156.825 Az status=0009 Ze status=0009 14:02:31 Check angles 14:02:31 SkyScan query 14:02:31 SkyScan query done: ret=0 az=72.06<-4804 ze=135.915<-2939 Statuses=0009 0009 14:02:31 Msec=750 True Az=72.06 Ze=135.915 Az status=0009 Ze status=0009 14:02:31 Check angles 14:02:31 SkyScan query 14:02:32 SkyScan query done: ret=0 az=54.705<-3647 ze=114.9<-4340 Statuses=0009 0009 14:02:32 Msec=1500 True Az=54.705 Ze=114.9 Az status=0009 Ze status=0009 14:02:32 Check angles 14:02:32 SkyScan query 14:02:33 SkyScan query done: ret=0 az=40.995<-2733 ze=93.99<-5734 Statuses=0009 0009 14:02:33 Msec=2250 True Az=40.995 Ze=93.99 Az status=0009 Ze status=0009 14:02:33 Check angles 14:02:33 SkyScan query 14:02:34 SkyScan query done: ret=0 az=40.995<-2733 ze=72.555<-7163 Statuses=0008 0009 14:02:34 Msec=3000 True Az=40.995 Ze=72.555 Az status=0008 Ze status=0009 14:02:34 Check angles 14:02:34 SkyScan query 14:02:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 14:02:34 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 14:02:34 Check angles 14:02:34 SkyScan query 14:02:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:02:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:02:35 Message to Master queued w/err=0: serial=276818 error=0 14:02:40 Received message from Master: op=Filter serial=276819 14:02:40 Color wheel filter change from 0 to 0 14:02:40 FLIGetFilterPos err=0 currentPosition=0 14:02:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:40 Filter is already there-color wheel unchanged 14:02:40 Received message from Master: op=Shutter serial=276820 14:02:40 Shutter LASER close 14:02:40 Received message from Camera: op=State serial=276822 14:02:40 GetSingleValue result=40 Value=cccccccc 14:02:40 SkyScan query 14:02:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:02:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:41 Parameters OK 14:02:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:41 Set A/D data flow result=40 14:02:41 Set A/D channel type result=40 14:02:41 Set A/D encoding result=40 14:02:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:41 Set channel filter=0.000000e+000 result=40 14:02:41 Config A/D Result=40 14:02:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:41 Get A/D filter: -9.255963e+061 result=40 14:02:41 Get A/D value=-858993460 result=40 14:02:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:41 Parameters OK 14:02:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:41 Set A/D data flow result=40 14:02:41 Set A/D channel type result=40 14:02:41 Set A/D encoding result=40 14:02:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:41 Set channel filter=0.000000e+000 result=40 14:02:41 Config A/D Result=40 14:02:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:41 Get A/D filter: -9.255963e+061 result=40 14:02:41 Get A/D value=-858993460 result=40 14:02:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:41 Aux= 14:02:41 Message to Camera, serial 276822 queued 14:03:18 Received message from Master: op=PointingHead serial=276835 14:03:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:03:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:03:18 Point started: ret=0 14:03:18 point_skyscan result=0 14:03:19 Check angles 14:03:19 SkyScan query 14:03:19 SkyScan query done: ret=0 az=64.035<-4269 ze=66.555<-7563 Statuses=0009 0008 14:03:19 Msec=0 True Az=64.035 Ze=66.555 Az status=0009 Ze status=0008 14:03:20 Check angles 14:03:20 SkyScan query 14:03:20 SkyScan query done: ret=0 az=81.81<-5454 ze=66.495<-7567 Statuses=0009 0008 14:03:20 Msec=750 True Az=81.81 Ze=66.495 Az status=0009 Ze status=0008 14:03:20 Check angles 14:03:20 SkyScan query 14:03:21 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 14:03:21 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 14:03:21 Check angles 14:03:21 SkyScan query 14:03:22 SkyScan query done: ret=0 az=116.85<-7790 ze=66.495<-7567 Statuses=0009 0008 14:03:22 Msec=2250 True Az=116.85 Ze=66.495 Az status=0009 Ze status=0008 14:03:22 Check angles 14:03:22 SkyScan query 14:03:22 SkyScan query done: ret=0 az=134.61<-8974 ze=66.495<-7567 Statuses=0009 0008 14:03:22 Msec=3000 True Az=134.61 Ze=66.495 Az status=0009 Ze status=0008 14:03:23 Check angles 14:03:23 SkyScan query 14:03:23 SkyScan query done: ret=0 az=152.025<-10135 ze=66.495<-7567 Statuses=0009 0008 14:03:23 Msec=3750 True Az=152.025 Ze=66.495 Az status=0009 Ze status=0008 14:03:23 Check angles 14:03:23 SkyScan query 14:03:24 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:03:24 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:03:24 Message to Master queued w/err=0: serial=276835 error=0 14:03:29 Received message from Master: op=Filter serial=276836 14:03:29 Color wheel filter change from 0 to 0 14:03:29 FLIGetFilterPos err=0 currentPosition=0 14:03:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:29 Filter is already there-color wheel unchanged 14:03:29 Received message from Master: op=Shutter serial=276837 14:03:29 Shutter LASER close 14:03:29 Received message from Camera: op=State serial=276839 14:03:29 GetSingleValue result=40 Value=cccccccc 14:03:29 SkyScan query 14:03:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:03:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:30 Parameters OK 14:03:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:30 Set A/D data flow result=40 14:03:30 Set A/D channel type result=40 14:03:30 Set A/D encoding result=40 14:03:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:30 Set channel filter=0.000000e+000 result=40 14:03:30 Config A/D Result=40 14:03:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:30 Get A/D filter: -9.255963e+061 result=40 14:03:30 Get A/D value=-858993460 result=40 14:03:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:30 Parameters OK 14:03:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:30 Set A/D data flow result=40 14:03:30 Set A/D channel type result=40 14:03:30 Set A/D encoding result=40 14:03:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:30 Set channel filter=0.000000e+000 result=40 14:03:30 Config A/D Result=40 14:03:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:30 Get A/D filter: -9.255963e+061 result=40 14:03:30 Get A/D value=-858993460 result=40 14:03:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:30 Aux= 14:03:30 Message to Camera, serial 276839 queued 14:04:07 Received message from Master: op=PointingHead serial=276852 14:04:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:04:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:04:07 Point started: ret=0 14:04:07 point_skyscan result=0 14:04:08 Check angles 14:04:08 SkyScan query 14:04:08 SkyScan query done: ret=0 az=134.82<-8988 ze=36.69<-9554 Statuses=0009 0009 14:04:08 Msec=0 True Az=134.82 Ze=36.69 Az status=0009 Ze status=0009 14:04:08 Check angles 14:04:08 SkyScan query 14:04:09 SkyScan query done: ret=0 az=117.495<-7833 ze=15.72<-10952 Statuses=0009 0009 14:04:09 Msec=750 True Az=117.495 Ze=15.72 Az status=0009 Ze status=0009 14:04:09 Check angles 14:04:09 SkyScan query 14:04:10 SkyScan query done: ret=0 az=100.095<-6673 ze=-5.22<-12348 Statuses=0009 0009 14:04:10 Msec=1500 True Az=100.095 Ze=-5.22 Az status=0009 Ze status=0009 14:04:10 Check angles 14:04:10 SkyScan query 14:04:11 SkyScan query done: ret=0 az=82.47<-5498 ze=-26.22<-13748 Statuses=0009 0009 14:04:11 Msec=2250 True Az=82.47 Ze=-26.22 Az status=0009 Ze status=0009 14:04:11 Check angles 14:04:11 SkyScan query 14:04:11 SkyScan query done: ret=0 az=65.07<-4338 ze=-38.58<-14572 Statuses=0009 0008 14:04:11 Msec=3000 True Az=65.07 Ze=-38.58 Az status=0009 Ze status=0008 14:04:11 Check angles 14:04:11 SkyScan query 14:04:12 SkyScan query done: ret=0 az=47.595<-3173 ze=-38.52<-14568 Statuses=0009 0008 14:04:12 Msec=3750 True Az=47.595 Ze=-38.52 Az status=0009 Ze status=0008 14:04:12 Check angles 14:04:12 SkyScan query 14:04:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:04:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:04:13 Message to Master queued w/err=0: serial=276852 error=0 14:04:18 Received message from Master: op=Filter serial=276853 14:04:18 Color wheel filter change from 0 to 0 14:04:18 FLIGetFilterPos err=0 currentPosition=0 14:04:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:18 Filter is already there-color wheel unchanged 14:04:18 Received message from Master: op=Shutter serial=276854 14:04:18 Shutter LASER close 14:04:18 Received message from Camera: op=State serial=276856 14:04:18 GetSingleValue result=40 Value=cccccccc 14:04:18 SkyScan query 14:04:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:04:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:19 Parameters OK 14:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:19 Set A/D data flow result=40 14:04:19 Set A/D channel type result=40 14:04:19 Set A/D encoding result=40 14:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:19 Set channel filter=0.000000e+000 result=40 14:04:19 Config A/D Result=40 14:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:19 Get A/D filter: -9.255963e+061 result=40 14:04:19 Get A/D value=-858993460 result=40 14:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:19 Parameters OK 14:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:19 Set A/D data flow result=40 14:04:19 Set A/D channel type result=40 14:04:19 Set A/D encoding result=40 14:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:19 Set channel filter=0.000000e+000 result=40 14:04:19 Config A/D Result=40 14:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:19 Get A/D filter: -9.255963e+061 result=40 14:04:19 Get A/D value=-858993460 result=40 14:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:19 Aux= 14:04:19 Message to Camera, serial 276856 queued 14:04:55 Received message from Master: op=PointingHead serial=276869 14:04:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:04:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:04:56 Point started: ret=0 14:04:56 point_skyscan result=0 14:04:56 Check angles 14:04:56 SkyScan query 14:04:57 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.46<-16564 Statuses=0009 0009 14:04:57 Msec=0 True Az=64.2 Ze=-68.46 Az status=0009 Ze status=0009 14:04:57 Check angles 14:04:57 SkyScan query 14:04:58 SkyScan query done: ret=0 az=81.945<-5463 ze=-89.82<-17988 Statuses=0009 0009 14:04:58 Msec=750 True Az=81.945 Ze=-89.82 Az status=0009 Ze status=0009 14:04:58 Check angles 14:04:58 SkyScan query 14:04:59 SkyScan query done: ret=0 az=99.9<-6660 ze=-111.195<-19413 Statuses=0009 0009 14:04:59 Msec=1500 True Az=99.9 Ze=-111.195 Az status=0009 Ze status=0009 14:04:59 Check angles 14:04:59 SkyScan query 14:04:59 SkyScan query done: ret=0 az=117.3<-7820 ze=-132.135<-20809 Statuses=0009 0009 14:04:59 Msec=2250 True Az=117.3 Ze=-132.135 Az status=0009 Ze status=0009 14:05:00 Check angles 14:05:00 SkyScan query 14:05:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 14:05:00 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 14:05:00 Check angles 14:05:00 SkyScan query 14:05:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:05:01 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:05:01 Message to Master queued w/err=0: serial=276869 error=0 14:05:06 Received message from Master: op=Filter serial=276870 14:05:06 Color wheel filter change from 0 to 0 14:05:06 FLIGetFilterPos err=0 currentPosition=0 14:05:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:06 Filter is already there-color wheel unchanged 14:05:06 Received message from Master: op=Shutter serial=276871 14:05:06 Shutter LASER close 14:05:06 Received message from Camera: op=State serial=276873 14:05:06 GetSingleValue result=40 Value=cccccccc 14:05:06 SkyScan query 14:05:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:05:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:07 Parameters OK 14:05:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:07 Set A/D data flow result=40 14:05:07 Set A/D channel type result=40 14:05:07 Set A/D encoding result=40 14:05:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:07 Set channel filter=0.000000e+000 result=40 14:05:07 Config A/D Result=40 14:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:07 Get A/D filter: -9.255963e+061 result=40 14:05:07 Get A/D value=-858993460 result=40 14:05:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:07 Parameters OK 14:05:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:07 Set A/D data flow result=40 14:05:07 Set A/D channel type result=40 14:05:07 Set A/D encoding result=40 14:05:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:07 Set channel filter=0.000000e+000 result=40 14:05:07 Config A/D Result=40 14:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:07 Get A/D filter: -9.255963e+061 result=40 14:05:07 Get A/D value=-858993460 result=40 14:05:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:07 Aux= 14:05:07 Message to Camera, serial 276873 queued 14:05:43 Received message from Master: op=PointingHead serial=276886 14:05:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:05:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:05:44 Point started: ret=0 14:05:44 point_skyscan result=0 14:05:45 Check angles 14:05:45 SkyScan query 14:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0009 0009 14:05:45 Msec=0 True Az=112.995 Ze=-170.97 Az status=0009 Ze status=0009 14:05:45 Check angles 14:05:45 SkyScan query 14:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:05:46 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:05:46 Message to Master queued w/err=0: serial=276886 error=0 14:05:51 Received message from Master: op=Filter serial=276887 14:05:51 Color wheel filter change from 0 to 0 14:05:51 FLIGetFilterPos err=0 currentPosition=0 14:05:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:51 Filter is already there-color wheel unchanged 14:05:51 Received message from Master: op=Shutter serial=276888 14:05:51 Shutter LASER open 14:05:51 Received message from Camera: op=State serial=276890 14:05:51 GetSingleValue result=40 Value=cccccccc 14:05:51 SkyScan query 14:05:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:05:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:52 Parameters OK 14:05:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:52 Set A/D data flow result=40 14:05:52 Set A/D channel type result=40 14:05:52 Set A/D encoding result=40 14:05:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:52 Set channel filter=0.000000e+000 result=40 14:05:52 Config A/D Result=40 14:05:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:52 Get A/D filter: -9.255963e+061 result=40 14:05:52 Get A/D value=-858993460 result=40 14:05:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:52 Parameters OK 14:05:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:52 Set A/D data flow result=40 14:05:52 Set A/D channel type result=40 14:05:52 Set A/D encoding result=40 14:05:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:52 Set channel filter=0.000000e+000 result=40 14:05:52 Config A/D Result=40 14:05:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:52 Get A/D filter: -9.255963e+061 result=40 14:05:52 Get A/D value=-858993460 result=40 14:05:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:52 Aux= 14:05:52 Message to Camera, serial 276890 queued 14:06:00 Received message from Master: op=Shutter serial=276900 14:06:00 Shutter LASER close 14:06:01 Received message from Master: op=PointingHead serial=276904 14:06:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:06:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:06:01 Point started: ret=0 14:06:01 point_skyscan result=0 14:06:02 Check angles 14:06:02 SkyScan query 14:06:03 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.46<-21564 Statuses=0009 0009 14:06:03 Msec=0 True Az=135.78 Ze=-143.46 Az status=0009 Ze status=0009 14:06:03 Check angles 14:06:03 SkyScan query [UTC 2018-12-19 14:06:03] 14:06:03 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.49<-20166 Statuses=0009 0009 14:06:03 Msec=750 True Az=153.24 Ze=-122.49 Az status=0009 Ze status=0009 14:06:03 Check angles 14:06:03 SkyScan query 14:06:04 SkyScan query done: ret=0 az=170.715<-11381 ze=-101.61<-18774 Statuses=0009 0009 14:06:04 Msec=1500 True Az=170.715 Ze=-101.61 Az status=0009 Ze status=0009 14:06:04 Check angles 14:06:04 SkyScan query 14:06:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.61<-17374 Statuses=0008 0009 14:06:05 Msec=2250 True Az=175.995 Ze=-80.61 Az status=0008 Ze status=0009 14:06:05 Check angles 14:06:05 SkyScan query 14:06:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.685<-15979 Statuses=0008 0009 14:06:06 Msec=3000 True Az=175.995 Ze=-59.685 Az status=0008 Ze status=0009 14:06:06 Check angles 14:06:06 SkyScan query 14:06:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:06:06 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:06:06 Message to Master queued w/err=0: serial=276904 error=0 14:06:11 Received message from Master: op=Filter serial=276905 14:06:11 Color wheel filter change from 0 to 0 14:06:11 FLIGetFilterPos err=0 currentPosition=0 14:06:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:11 Filter is already there-color wheel unchanged 14:06:11 Received message from Master: op=Shutter serial=276906 14:06:11 Shutter LASER close 14:06:12 Received message from Camera: op=State serial=276908 14:06:12 GetSingleValue result=40 Value=cccccccc 14:06:12 SkyScan query 14:06:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:06:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:12 Parameters OK 14:06:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:12 Set A/D data flow result=40 14:06:12 Set A/D channel type result=40 14:06:12 Set A/D encoding result=40 14:06:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:12 Set channel filter=0.000000e+000 result=40 14:06:12 Config A/D Result=40 14:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:12 Get A/D filter: -9.255963e+061 result=40 14:06:12 Get A/D value=-858993460 result=40 14:06:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:12 Parameters OK 14:06:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:12 Set A/D data flow result=40 14:06:12 Set A/D channel type result=40 14:06:12 Set A/D encoding result=40 14:06:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:12 Set channel filter=0.000000e+000 result=40 14:06:12 Config A/D Result=40 14:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:12 Get A/D filter: -9.255963e+061 result=40 14:06:12 Get A/D value=-858993460 result=40 14:06:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:12 Aux= 14:06:12 Message to Camera, serial 276908 queued 14:06:49 Received message from Master: op=PointingHead serial=276921 14:06:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:06:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:06:49 Point started: ret=0 14:06:49 point_skyscan result=0 14:06:50 Check angles 14:06:50 SkyScan query 14:06:51 SkyScan query done: ret=0 az=153.285<-10219 ze=-22.065<-13471 Statuses=0009 0009 14:06:51 Msec=0 True Az=153.285 Ze=-22.065 Az status=0009 Ze status=0009 14:06:51 Check angles 14:06:51 SkyScan query 14:06:51 SkyScan query done: ret=0 az=135.33<-9022 ze=-0.63<-12042 Statuses=0009 0009 14:06:51 Msec=750 True Az=135.33 Ze=-0.63 Az status=0009 Ze status=0009 14:06:52 Check angles 14:06:52 SkyScan query 14:06:52 SkyScan query done: ret=0 az=117.795<-7853 ze=20.37<-10642 Statuses=0009 0009 14:06:52 Msec=1500 True Az=117.795 Ze=20.37 Az status=0009 Ze status=0009 14:06:52 Check angles 14:06:52 SkyScan query 14:06:53 SkyScan query done: ret=0 az=100.47<-6698 ze=41.295<-9247 Statuses=0009 0009 14:06:53 Msec=2250 True Az=100.47 Ze=41.295 Az status=0009 Ze status=0009 14:06:53 Check angles 14:06:53 SkyScan query 14:06:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 14:06:54 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 14:06:54 Check angles 14:06:54 SkyScan query 14:06:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:06:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:06:54 Message to Master queued w/err=0: serial=276921 error=0 14:06:59 Received message from Master: op=Filter serial=276922 14:06:59 Color wheel filter change from 0 to 0 14:06:59 FLIGetFilterPos err=0 currentPosition=0 14:06:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:59 Filter is already there-color wheel unchanged 14:07:00 Received message from Master: op=Shutter serial=276923 14:07:00 Shutter LASER close 14:07:00 Received message from Camera: op=State serial=276925 14:07:00 GetSingleValue result=40 Value=cccccccc 14:07:00 SkyScan query 14:07:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:07:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:00 Parameters OK 14:07:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:00 Set A/D data flow result=40 14:07:00 Set A/D channel type result=40 14:07:00 Set A/D encoding result=40 14:07:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:00 Set channel filter=0.000000e+000 result=40 14:07:00 Config A/D Result=40 14:07:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:00 Get A/D filter: -9.255963e+061 result=40 14:07:00 Get A/D value=-858993460 result=40 14:07:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:00 Parameters OK 14:07:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:00 Set A/D data flow result=40 14:07:00 Set A/D channel type result=40 14:07:00 Set A/D encoding result=40 14:07:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:00 Set channel filter=0.000000e+000 result=40 14:07:00 Config A/D Result=40 14:07:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:00 Get A/D filter: -9.255963e+061 result=40 14:07:00 Get A/D value=-858993460 result=40 14:07:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:00 Aux= 14:07:00 Message to Camera, serial 276925 queued 14:07:37 Received message from Master: op=PointingHead serial=276938 14:07:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:07:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:07:37 Point started: ret=0 14:07:37 point_skyscan result=0 14:07:38 Check angles 14:07:38 SkyScan query 14:07:39 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 14:07:39 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 14:07:39 Check angles 14:07:39 SkyScan query 14:07:40 SkyScan query done: ret=0 az=126.525<-8435 ze=38.505<-9433 Statuses=0009 0008 14:07:40 Msec=750 True Az=126.525 Ze=38.505 Az status=0009 Ze status=0008 14:07:40 Check angles 14:07:40 SkyScan query 14:07:40 SkyScan query done: ret=0 az=144.345<-9623 ze=38.505<-9433 Statuses=0009 0008 14:07:40 Msec=1500 True Az=144.345 Ze=38.505 Az status=0009 Ze status=0008 14:07:41 Check angles 14:07:41 SkyScan query 14:07:41 SkyScan query done: ret=0 az=162.255<-10817 ze=38.505<-9433 Statuses=0009 0008 14:07:41 Msec=2250 True Az=162.255 Ze=38.505 Az status=0009 Ze status=0008 14:07:41 Check angles 14:07:41 SkyScan query 14:07:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:07:42 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:07:42 Check angles 14:07:42 SkyScan query 14:07:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:07:43 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:07:43 Message to Master queued w/err=0: serial=276938 error=0 14:07:48 Received message from Master: op=Filter serial=276939 14:07:48 Color wheel filter change from 0 to 0 14:07:48 FLIGetFilterPos err=0 currentPosition=0 14:07:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:48 Filter is already there-color wheel unchanged 14:07:48 Received message from Master: op=Shutter serial=276940 14:07:48 Shutter LASER close 14:07:48 Received message from Camera: op=State serial=276942 14:07:48 GetSingleValue result=40 Value=cccccccc 14:07:48 SkyScan query 14:07:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:07:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:48 Parameters OK 14:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:48 Set A/D data flow result=40 14:07:48 Set A/D channel type result=40 14:07:48 Set A/D encoding result=40 14:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:48 Set channel filter=0.000000e+000 result=40 14:07:48 Config A/D Result=40 14:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:48 Get A/D filter: -9.255963e+061 result=40 14:07:48 Get A/D value=-858993460 result=40 14:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:48 Parameters OK 14:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:48 Set A/D data flow result=40 14:07:48 Set A/D channel type result=40 14:07:48 Set A/D encoding result=40 14:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:48 Set channel filter=0.000000e+000 result=40 14:07:48 Config A/D Result=40 14:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:48 Get A/D filter: -9.255963e+061 result=40 14:07:48 Get A/D value=-858993460 result=40 14:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:48 Aux= 14:07:48 Message to Camera, serial 276942 queued 14:08:25 Received message from Master: op=PointingHead serial=276955 14:08:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:08:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:08:26 Point started: ret=0 14:08:26 point_skyscan result=0 14:08:26 Check angles 14:08:26 SkyScan query 14:08:27 SkyScan query done: ret=0 az=152.91<-10194 ze=8.67<-11422 Statuses=0009 0009 14:08:27 Msec=0 True Az=152.91 Ze=8.67 Az status=0009 Ze status=0009 14:08:27 Check angles 14:08:27 SkyScan query 14:08:28 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.705<-12847 Statuses=0009 0009 14:08:28 Msec=750 True Az=135.105 Ze=-12.705 Az status=0009 Ze status=0009 14:08:28 Check angles 14:08:28 SkyScan query 14:08:28 SkyScan query done: ret=0 az=117.135<-7809 ze=-34.2<-14280 Statuses=0009 0009 14:08:28 Msec=1500 True Az=117.135 Ze=-34.2 Az status=0009 Ze status=0009 14:08:29 Check angles 14:08:29 SkyScan query 14:08:29 SkyScan query done: ret=0 az=99.48<-6632 ze=-51.57<-15438 Statuses=0009 0009 14:08:29 Msec=2250 True Az=99.48 Ze=-51.57 Az status=0009 Ze status=0009 14:08:29 Check angles 14:08:29 SkyScan query 14:08:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 14:08:30 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 14:08:30 Check angles 14:08:30 SkyScan query 14:08:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:08:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:08:31 Message to Master queued w/err=0: serial=276955 error=0 14:08:36 Received message from Master: op=Filter serial=276956 14:08:36 Color wheel filter change from 0 to 0 14:08:36 FLIGetFilterPos err=0 currentPosition=0 14:08:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:36 Filter is already there-color wheel unchanged 14:08:36 Received message from Master: op=Shutter serial=276957 14:08:36 Shutter LASER close 14:08:36 Received message from Camera: op=State serial=276959 14:08:36 GetSingleValue result=40 Value=cccccccc 14:08:36 SkyScan query 14:08:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:08:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:37 Parameters OK 14:08:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:37 Set A/D data flow result=40 14:08:37 Set A/D channel type result=40 14:08:37 Set A/D encoding result=40 14:08:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:37 Set channel filter=0.000000e+000 result=40 14:08:37 Config A/D Result=40 14:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:37 Get A/D filter: -9.255963e+061 result=40 14:08:37 Get A/D value=-858993460 result=40 14:08:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:37 Parameters OK 14:08:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:37 Set A/D data flow result=40 14:08:37 Set A/D channel type result=40 14:08:37 Set A/D encoding result=40 14:08:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:37 Set channel filter=0.000000e+000 result=40 14:08:37 Config A/D Result=40 14:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:37 Get A/D filter: -9.255963e+061 result=40 14:08:37 Get A/D value=-858993460 result=40 14:08:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:37 Aux= 14:08:37 Message to Camera, serial 276959 queued 14:09:13 Received message from Master: op=PointingHead serial=276972 14:09:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:09:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:09:14 Point started: ret=0 14:09:14 point_skyscan result=0 14:09:14 Check angles 14:09:14 SkyScan query 14:09:15 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.06<-17404 Statuses=0009 0009 14:09:15 Msec=0 True Az=108.825 Ze=-81.06 Az status=0009 Ze status=0009 14:09:15 Check angles 14:09:15 SkyScan query 14:09:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 14:09:16 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 14:09:16 Check angles 14:09:16 SkyScan query 14:09:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 14:09:17 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 14:09:17 Check angles 14:09:17 SkyScan query 14:09:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 14:09:17 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 14:09:17 Check angles 14:09:17 SkyScan query 14:09:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 14:09:18 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 14:09:18 Check angles 14:09:18 SkyScan query 14:09:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:09:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:09:19 Message to Master queued w/err=0: serial=276972 error=0 14:09:24 Received message from Master: op=Filter serial=276973 14:09:24 Color wheel filter change from 0 to 0 14:09:24 FLIGetFilterPos err=0 currentPosition=0 14:09:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:24 Filter is already there-color wheel unchanged 14:09:24 Received message from Master: op=Shutter serial=276974 14:09:24 Shutter LASER open 14:09:24 Received message from Camera: op=State serial=276976 14:09:24 GetSingleValue result=40 Value=cccccccc 14:09:24 SkyScan query 14:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:09:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:25 Parameters OK 14:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:25 Set A/D data flow result=40 14:09:25 Set A/D channel type result=40 14:09:25 Set A/D encoding result=40 14:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:25 Set channel filter=0.000000e+000 result=40 14:09:25 Config A/D Result=40 14:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:25 Get A/D filter: -9.255963e+061 result=40 14:09:25 Get A/D value=-858993460 result=40 14:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:25 Parameters OK 14:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:25 Set A/D data flow result=40 14:09:25 Set A/D channel type result=40 14:09:25 Set A/D encoding result=40 14:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:25 Set channel filter=0.000000e+000 result=40 14:09:25 Config A/D Result=40 14:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:25 Get A/D filter: -9.255963e+061 result=40 14:09:25 Get A/D value=-858993460 result=40 14:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:25 Aux= 14:09:25 Message to Camera, serial 276976 queued 14:09:33 Received message from Master: op=Shutter serial=276986 14:09:33 Shutter LASER close 14:09:34 Received message from Master: op=PointingHead serial=276990 14:09:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:09:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:09:34 Point started: ret=0 14:09:34 point_skyscan result=0 14:09:35 Check angles 14:09:35 SkyScan query 14:09:35 SkyScan query done: ret=0 az=90.165<-6011 ze=157.515<-1499 Statuses=0009 0009 14:09:35 Msec=0 True Az=90.165 Ze=157.515 Az status=0009 Ze status=0009 14:09:35 Check angles 14:09:35 SkyScan query 14:09:36 SkyScan query done: ret=0 az=72.69<-4846 ze=136.53<-2898 Statuses=0009 0009 14:09:36 Msec=750 True Az=72.69 Ze=136.53 Az status=0009 Ze status=0009 14:09:36 Check angles 14:09:36 SkyScan query 14:09:37 SkyScan query done: ret=0 az=55.23<-3682 ze=115.635<-4291 Statuses=0009 0009 14:09:37 Msec=1500 True Az=55.23 Ze=115.635 Az status=0009 Ze status=0009 14:09:37 Check angles 14:09:37 SkyScan query 14:09:38 SkyScan query done: ret=0 az=41.01<-2734 ze=94.635<-5691 Statuses=0009 0009 14:09:38 Msec=2250 True Az=41.01 Ze=94.635 Az status=0009 Ze status=0009 14:09:38 Check angles 14:09:38 SkyScan query 14:09:38 SkyScan query done: ret=0 az=40.995<-2733 ze=73.725<-7085 Statuses=0008 0009 14:09:38 Msec=3000 True Az=40.995 Ze=73.725 Az status=0008 Ze status=0009 14:09:38 Check angles 14:09:38 SkyScan query 14:09:39 SkyScan query done: ret=0 az=40.995<-2733 ze=53.01<-8466 Statuses=0008 0009 14:09:39 Msec=3750 True Az=40.995 Ze=53.01 Az status=0008 Ze status=0009 14:09:39 Check angles 14:09:39 SkyScan query 14:09:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:09:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:09:40 Message to Master queued w/err=0: serial=276990 error=0 14:09:45 Received message from Master: op=Filter serial=276991 14:09:45 Color wheel filter change from 0 to 0 14:09:45 FLIGetFilterPos err=0 currentPosition=0 14:09:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:45 Filter is already there-color wheel unchanged 14:09:45 Received message from Master: op=Shutter serial=276992 14:09:45 Shutter LASER close 14:09:45 Received message from Camera: op=State serial=276994 14:09:45 GetSingleValue result=40 Value=cccccccc 14:09:45 SkyScan query 14:09:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:09:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:46 Parameters OK 14:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:46 Set A/D data flow result=40 14:09:46 Set A/D channel type result=40 14:09:46 Set A/D encoding result=40 14:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:46 Set channel filter=0.000000e+000 result=40 14:09:46 Config A/D Result=40 14:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:46 Get A/D filter: -9.255963e+061 result=40 14:09:46 Get A/D value=-858993460 result=40 14:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:46 Parameters OK 14:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:46 Set A/D data flow result=40 14:09:46 Set A/D channel type result=40 14:09:46 Set A/D encoding result=40 14:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:46 Set channel filter=0.000000e+000 result=40 14:09:46 Config A/D Result=40 14:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:46 Get A/D filter: -9.255963e+061 result=40 14:09:46 Get A/D value=-858993460 result=40 14:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:46 Aux= 14:09:46 Message to Camera, serial 276994 queued 14:10:22 Received message from Master: op=PointingHead serial=277007 14:10:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:10:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:10:23 Point started: ret=0 14:10:23 point_skyscan result=0 14:10:24 Check angles 14:10:24 SkyScan query 14:10:24 SkyScan query done: ret=0 az=64.2<-4280 ze=66.54<-7564 Statuses=0009 0008 14:10:24 Msec=0 True Az=64.2 Ze=66.54 Az status=0009 Ze status=0008 14:10:24 Check angles 14:10:24 SkyScan query 14:10:25 SkyScan query done: ret=0 az=82.08<-5472 ze=66.51<-7566 Statuses=0009 0008 14:10:25 Msec=750 True Az=82.08 Ze=66.51 Az status=0009 Ze status=0008 14:10:25 Check angles 14:10:25 SkyScan query 14:10:26 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 14:10:26 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 14:10:26 Check angles 14:10:26 SkyScan query 14:10:26 SkyScan query done: ret=0 az=116.94<-7796 ze=66.495<-7567 Statuses=0009 0008 14:10:26 Msec=2250 True Az=116.94 Ze=66.495 Az status=0009 Ze status=0008 14:10:27 Check angles 14:10:27 SkyScan query 14:10:27 SkyScan query done: ret=0 az=134.745<-8983 ze=66.495<-7567 Statuses=0009 0008 14:10:27 Msec=3000 True Az=134.745 Ze=66.495 Az status=0009 Ze status=0008 14:10:27 Check angles 14:10:27 SkyScan query 14:10:28 SkyScan query done: ret=0 az=152.49<-10166 ze=66.495<-7567 Statuses=0009 0008 14:10:28 Msec=3750 True Az=152.49 Ze=66.495 Az status=0009 Ze status=0008 14:10:28 Check angles 14:10:28 SkyScan query 14:10:29 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:10:29 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:10:29 Message to Master queued w/err=0: serial=277007 error=0 14:10:34 Received message from Master: op=Filter serial=277008 14:10:34 Color wheel filter change from 0 to 0 14:10:34 FLIGetFilterPos err=0 currentPosition=0 14:10:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:34 Filter is already there-color wheel unchanged 14:10:34 Received message from Master: op=Shutter serial=277009 14:10:34 Shutter LASER close 14:10:34 Received message from Camera: op=State serial=277011 14:10:34 GetSingleValue result=40 Value=cccccccc 14:10:34 SkyScan query 14:10:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:10:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:35 Parameters OK 14:10:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:35 Set A/D data flow result=40 14:10:35 Set A/D channel type result=40 14:10:35 Set A/D encoding result=40 14:10:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:35 Set channel filter=0.000000e+000 result=40 14:10:35 Config A/D Result=40 14:10:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:35 Get A/D filter: -9.255963e+061 result=40 14:10:35 Get A/D value=-858993460 result=40 14:10:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:35 Parameters OK 14:10:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:35 Set A/D data flow result=40 14:10:35 Set A/D channel type result=40 14:10:35 Set A/D encoding result=40 14:10:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:35 Set channel filter=0.000000e+000 result=40 14:10:35 Config A/D Result=40 14:10:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:35 Get A/D filter: -9.255963e+061 result=40 14:10:35 Get A/D value=-858993460 result=40 14:10:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:35 Aux= 14:10:35 Message to Camera, serial 277011 queued 14:11:11 Received message from Master: op=PointingHead serial=277024 14:11:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:11:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:11:12 Point started: ret=0 14:11:12 point_skyscan result=0 14:11:12 Check angles 14:11:12 SkyScan query 14:11:13 SkyScan query done: ret=0 az=134.565<-8971 ze=36.24<-9584 Statuses=0009 0009 14:11:13 Msec=0 True Az=134.565 Ze=36.24 Az status=0009 Ze status=0009 14:11:13 Check angles 14:11:13 SkyScan query 14:11:14 SkyScan query done: ret=0 az=117.105<-7807 ze=15.315<-10979 Statuses=0009 0009 14:11:14 Msec=750 True Az=117.105 Ze=15.315 Az status=0009 Ze status=0009 14:11:14 Check angles 14:11:14 SkyScan query 14:11:15 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.685<-12379 Statuses=0009 0009 14:11:15 Msec=1500 True Az=99.69 Ze=-5.685 Az status=0009 Ze status=0009 14:11:15 Check angles 14:11:15 SkyScan query 14:11:15 SkyScan query done: ret=0 az=81.825<-5455 ze=-27.15<-13810 Statuses=0009 0009 14:11:15 Msec=2250 True Az=81.825 Ze=-27.15 Az status=0009 Ze status=0009 14:11:15 Check angles 14:11:15 SkyScan query 14:11:16 SkyScan query done: ret=0 az=64.23<-4282 ze=-38.58<-14572 Statuses=0009 0008 14:11:16 Msec=3000 True Az=64.23 Ze=-38.58 Az status=0009 Ze status=0008 14:11:16 Check angles 14:11:16 SkyScan query 14:11:17 SkyScan query done: ret=0 az=46.545<-3103 ze=-38.52<-14568 Statuses=0009 0008 14:11:17 Msec=3750 True Az=46.545 Ze=-38.52 Az status=0009 Ze status=0008 14:11:17 Check angles 14:11:17 SkyScan query 14:11:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:11:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:11:18 Message to Master queued w/err=0: serial=277024 error=0 14:11:23 Received message from Master: op=Filter serial=277025 14:11:23 Color wheel filter change from 0 to 0 14:11:23 FLIGetFilterPos err=0 currentPosition=0 14:11:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:23 Filter is already there-color wheel unchanged 14:11:23 Received message from Master: op=Shutter serial=277026 14:11:23 Shutter LASER close 14:11:23 Received message from Camera: op=State serial=277028 14:11:23 GetSingleValue result=40 Value=cccccccc 14:11:23 SkyScan query 14:11:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:11:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:23 Parameters OK 14:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:23 Set A/D data flow result=40 14:11:23 Set A/D channel type result=40 14:11:23 Set A/D encoding result=40 14:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:23 Set channel filter=0.000000e+000 result=40 14:11:23 Config A/D Result=40 14:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:23 Get A/D filter: -9.255963e+061 result=40 14:11:23 Get A/D value=-858993460 result=40 14:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:23 Parameters OK 14:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:23 Set A/D data flow result=40 14:11:23 Set A/D channel type result=40 14:11:23 Set A/D encoding result=40 14:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:23 Set channel filter=0.000000e+000 result=40 14:11:23 Config A/D Result=40 14:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:23 Get A/D filter: -9.255963e+061 result=40 14:11:23 Get A/D value=-858993460 result=40 14:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:23 Aux= 14:11:23 Message to Camera, serial 277028 queued 14:12:00 Received message from Master: op=PointingHead serial=277041 14:12:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:12:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:12:01 Point started: ret=0 14:12:01 point_skyscan result=0 14:12:01 Check angles 14:12:01 SkyScan query 14:12:02 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.025<-16535 Statuses=0009 0009 14:12:02 Msec=0 True Az=63.78 Ze=-68.025 Az status=0009 Ze status=0009 14:12:02 Check angles 14:12:02 SkyScan query 14:12:03 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.445<-17963 Statuses=0009 0009 14:12:03 Msec=750 True Az=81.6 Ze=-89.445 Az status=0009 Ze status=0009 14:12:03 Check angles 14:12:03 SkyScan query 14:12:03 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.805<-19387 Statuses=0009 0009 14:12:03 Msec=1500 True Az=99.405 Ze=-110.805 Az status=0009 Ze status=0009 14:12:04 Check angles 14:12:04 SkyScan query 14:12:04 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.73<-20782 Statuses=0009 0009 14:12:04 Msec=2250 True Az=116.82 Ze=-131.73 Az status=0009 Ze status=0009 14:12:04 Check angles 14:12:04 SkyScan query 14:12:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 14:12:05 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 14:12:05 Check angles 14:12:05 SkyScan query 14:12:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:12:06 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:12:06 Message to Master queued w/err=0: serial=277041 error=0 14:12:11 Received message from Master: op=Filter serial=277042 14:12:11 Color wheel filter change from 0 to 0 14:12:11 FLIGetFilterPos err=0 currentPosition=0 14:12:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:11 Filter is already there-color wheel unchanged 14:12:11 Received message from Master: op=Shutter serial=277043 14:12:11 Shutter LASER close 14:12:11 Received message from Camera: op=State serial=277045 14:12:11 GetSingleValue result=40 Value=cccccccc 14:12:11 SkyScan query 14:12:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:12:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:11 Parameters OK 14:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:11 Set A/D data flow result=40 14:12:11 Set A/D channel type result=40 14:12:11 Set A/D encoding result=40 14:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:11 Set channel filter=0.000000e+000 result=40 14:12:11 Config A/D Result=40 14:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:11 Get A/D filter: -9.255963e+061 result=40 14:12:11 Get A/D value=-858993460 result=40 14:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:11 Parameters OK 14:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:11 Set A/D data flow result=40 14:12:11 Set A/D channel type result=40 14:12:11 Set A/D encoding result=40 14:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:11 Set channel filter=0.000000e+000 result=40 14:12:11 Config A/D Result=40 14:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:11 Get A/D filter: -9.255963e+061 result=40 14:12:11 Get A/D value=-858993460 result=40 14:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:11 Aux= 14:12:11 Message to Camera, serial 277045 queued 14:12:47 Received message from Master: op=PointingHead serial=277057 14:12:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:12:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:12:48 Point started: ret=0 14:12:48 point_skyscan result=0 14:12:48 Check angles 14:12:48 SkyScan query 14:12:49 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 14:12:49 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 14:12:49 Check angles 14:12:49 SkyScan query 14:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:12:50 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:12:50 Message to Master queued w/err=0: serial=277057 error=0 14:12:55 Received message from Master: op=Filter serial=277058 14:12:55 Color wheel filter change from 0 to 0 14:12:55 FLIGetFilterPos err=0 currentPosition=0 14:12:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:55 Filter is already there-color wheel unchanged 14:12:55 Received message from Master: op=Shutter serial=277059 14:12:55 Shutter LASER open 14:12:55 Received message from Camera: op=State serial=277061 14:12:55 GetSingleValue result=40 Value=cccccccc 14:12:55 SkyScan query 14:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:12:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:56 Parameters OK 14:12:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:56 Set A/D data flow result=40 14:12:56 Set A/D channel type result=40 14:12:56 Set A/D encoding result=40 14:12:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:56 Set channel filter=0.000000e+000 result=40 14:12:56 Config A/D Result=40 14:12:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:56 Get A/D filter: -9.255963e+061 result=40 14:12:56 Get A/D value=-858993460 result=40 14:12:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:56 Parameters OK 14:12:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:56 Set A/D data flow result=40 14:12:56 Set A/D channel type result=40 14:12:56 Set A/D encoding result=40 14:12:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:56 Set channel filter=0.000000e+000 result=40 14:12:56 Config A/D Result=40 14:12:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:56 Get A/D filter: -9.255963e+061 result=40 14:12:56 Get A/D value=-858993460 result=40 14:12:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:56 Aux= 14:12:56 Message to Camera, serial 277061 queued 14:13:04 Received message from Master: op=Shutter serial=277071 14:13:04 Shutter LASER close 14:13:05 Received message from Master: op=PointingHead serial=277075 14:13:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:13:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:13:05 Point started: ret=0 14:13:05 point_skyscan result=0 14:13:06 Check angles 14:13:06 SkyScan query 14:13:06 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.475<-21565 Statuses=0009 0009 14:13:06 Msec=0 True Az=136.005 Ze=-143.475 Az status=0009 Ze status=0009 14:13:07 Check angles 14:13:07 SkyScan query 14:13:07 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.475<-20165 Statuses=0009 0009 14:13:07 Msec=750 True Az=153.42 Ze=-122.475 Az status=0009 Ze status=0009 14:13:07 Check angles 14:13:07 SkyScan query 14:13:08 SkyScan query done: ret=0 az=170.865<-11391 ze=-101.625<-18775 Statuses=0009 0009 14:13:08 Msec=1500 True Az=170.865 Ze=-101.625 Az status=0009 Ze status=0009 14:13:08 Check angles 14:13:08 SkyScan query 14:13:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.22<-17348 Statuses=0008 0009 14:13:09 Msec=2250 True Az=175.995 Ze=-80.22 Az status=0008 Ze status=0009 14:13:09 Check angles 14:13:09 SkyScan query 14:13:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.175<-15945 Statuses=0008 0009 14:13:09 Msec=3000 True Az=175.995 Ze=-59.175 Az status=0008 Ze status=0009 14:13:10 Check angles 14:13:10 SkyScan query 14:13:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:13:10 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:13:10 Message to Master queued w/err=0: serial=277075 error=0 14:13:15 Received message from Master: op=Filter serial=277076 14:13:15 Color wheel filter change from 0 to 0 14:13:15 FLIGetFilterPos err=0 currentPosition=0 14:13:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:15 Filter is already there-color wheel unchanged 14:13:15 Received message from Master: op=Shutter serial=277077 14:13:15 Shutter LASER close 14:13:16 Received message from Camera: op=State serial=277079 14:13:16 GetSingleValue result=40 Value=cccccccc 14:13:16 SkyScan query 14:13:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:13:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:16 Parameters OK 14:13:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:16 Set A/D data flow result=40 14:13:16 Set A/D channel type result=40 14:13:16 Set A/D encoding result=40 14:13:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:16 Set channel filter=0.000000e+000 result=40 14:13:16 Config A/D Result=40 14:13:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:16 Get A/D filter: -9.255963e+061 result=40 14:13:16 Get A/D value=-858993460 result=40 14:13:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:16 Parameters OK 14:13:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:16 Set A/D data flow result=40 14:13:16 Set A/D channel type result=40 14:13:16 Set A/D encoding result=40 14:13:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:16 Set channel filter=0.000000e+000 result=40 14:13:16 Config A/D Result=40 14:13:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:16 Get A/D filter: -9.255963e+061 result=40 14:13:16 Get A/D value=-858993460 result=40 14:13:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:16 Aux= 14:13:16 Message to Camera, serial 277079 queued 14:13:53 Received message from Master: op=PointingHead serial=277092 14:13:53 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:13:53 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:13:53 Point started: ret=0 14:13:53 point_skyscan result=0 14:13:54 Check angles 14:13:54 SkyScan query 14:13:55 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.9<-13460 Statuses=0009 0009 14:13:55 Msec=0 True Az=153.09 Ze=-21.9 Az status=0009 Ze status=0009 14:13:55 Check angles 14:13:55 SkyScan query 14:13:55 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.87<-12058 Statuses=0009 0009 14:13:55 Msec=750 True Az=135.63 Ze=-0.87 Az status=0009 Ze status=0009 14:13:56 Check angles 14:13:56 SkyScan query 14:13:56 SkyScan query done: ret=0 az=118.125<-7875 ze=20.04<-10664 Statuses=0009 0009 14:13:56 Msec=1500 True Az=118.125 Ze=20.04 Az status=0009 Ze status=0009 14:13:56 Check angles 14:13:56 SkyScan query 14:13:57 SkyScan query done: ret=0 az=100.71<-6714 ze=41.055<-9263 Statuses=0009 0009 14:13:57 Msec=2250 True Az=100.71 Ze=41.055 Az status=0009 Ze status=0009 14:13:57 Check angles 14:13:57 SkyScan query 14:13:58 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 14:13:58 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 14:13:58 Check angles 14:13:58 SkyScan query 14:13:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:13:58 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:13:58 Message to Master queued w/err=0: serial=277092 error=0 14:14:03 Received message from Master: op=Filter serial=277093 14:14:03 Color wheel filter change from 0 to 0 14:14:03 FLIGetFilterPos err=0 currentPosition=0 14:14:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:03 Filter is already there-color wheel unchanged 14:14:04 Received message from Master: op=Shutter serial=277094 14:14:04 Shutter LASER close 14:14:04 Received message from Camera: op=State serial=277096 14:14:04 GetSingleValue result=40 Value=cccccccc 14:14:04 SkyScan query 14:14:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:14:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:04 Parameters OK 14:14:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:04 Set A/D data flow result=40 14:14:04 Set A/D channel type result=40 14:14:04 Set A/D encoding result=40 14:14:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:04 Set channel filter=0.000000e+000 result=40 14:14:04 Config A/D Result=40 14:14:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:04 Get A/D filter: -9.255963e+061 result=40 14:14:04 Get A/D value=-858993460 result=40 14:14:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:04 Parameters OK 14:14:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:04 Set A/D data flow result=40 14:14:04 Set A/D channel type result=40 14:14:04 Set A/D encoding result=40 14:14:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:04 Set channel filter=0.000000e+000 result=40 14:14:04 Config A/D Result=40 14:14:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:04 Get A/D filter: -9.255963e+061 result=40 14:14:04 Get A/D value=-858993460 result=40 14:14:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:04 Aux= 14:14:04 Message to Camera, serial 277096 queued 14:14:41 Received message from Master: op=PointingHead serial=277109 14:14:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:14:41 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:14:41 Point started: ret=0 14:14:41 point_skyscan result=0 14:14:42 Check angles 14:14:42 SkyScan query 14:14:43 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 14:14:43 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 14:14:43 Check angles 14:14:43 SkyScan query 14:14:43 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 14:14:43 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 14:14:44 Check angles 14:14:44 SkyScan query 14:14:44 SkyScan query done: ret=0 az=143.76<-9584 ze=38.505<-9433 Statuses=0009 0008 14:14:44 Msec=1500 True Az=143.76 Ze=38.505 Az status=0009 Ze status=0008 14:14:44 Check angles 14:14:44 SkyScan query 14:14:45 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 14:14:45 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 14:14:45 Check angles 14:14:45 SkyScan query 14:14:46 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:14:46 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:14:46 Check angles 14:14:46 SkyScan query 14:14:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:14:46 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:14:46 Message to Master queued w/err=0: serial=277109 error=0 14:14:51 Received message from Master: op=Filter serial=277110 14:14:51 Color wheel filter change from 0 to 0 14:14:51 FLIGetFilterPos err=0 currentPosition=0 14:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:51 Filter is already there-color wheel unchanged 14:14:52 Received message from Master: op=Shutter serial=277111 14:14:52 Shutter LASER close 14:14:52 Received message from Camera: op=State serial=277113 14:14:52 GetSingleValue result=40 Value=cccccccc 14:14:52 SkyScan query 14:14:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:14:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:52 Parameters OK 14:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:52 Set A/D data flow result=40 14:14:52 Set A/D channel type result=40 14:14:52 Set A/D encoding result=40 14:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:52 Set channel filter=0.000000e+000 result=40 14:14:52 Config A/D Result=40 14:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:52 Get A/D filter: -9.255963e+061 result=40 14:14:52 Get A/D value=-858993460 result=40 14:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:52 Parameters OK 14:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:52 Set A/D data flow result=40 14:14:52 Set A/D channel type result=40 14:14:52 Set A/D encoding result=40 14:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:52 Set channel filter=0.000000e+000 result=40 14:14:52 Config A/D Result=40 14:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:52 Get A/D filter: -9.255963e+061 result=40 14:14:52 Get A/D value=-858993460 result=40 14:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:52 Aux= 14:14:52 Message to Camera, serial 277113 queued 14:15:27 Received message from Master: op=Identify serial=277121 14:15:29 Received message from Master: op=PointingHead serial=277129 14:15:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:15:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:15:29 Point started: ret=0 14:15:29 point_skyscan result=0 14:15:30 Check angles 14:15:30 SkyScan query 14:15:31 SkyScan query done: ret=0 az=153.06<-10204 ze=8.805<-11413 Statuses=0009 0009 14:15:31 Msec=0 True Az=153.06 Ze=8.805 Az status=0009 Ze status=0009 14:15:31 Check angles 14:15:31 SkyScan query 14:15:31 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.615<-12841 Statuses=0009 0009 14:15:31 Msec=750 True Az=135.21 Ze=-12.615 Az status=0009 Ze status=0009 14:15:32 Check angles 14:15:32 SkyScan query 14:15:32 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.675<-14245 Statuses=0009 0009 14:15:32 Msec=1500 True Az=117.765 Ze=-33.675 Az status=0009 Ze status=0009 14:15:32 Check angles 14:15:32 SkyScan query 14:15:33 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.555<-15437 Statuses=0009 0009 14:15:33 Msec=2250 True Az=100.365 Ze=-51.555 Az status=0009 Ze status=0009 14:15:33 Check angles 14:15:33 SkyScan query 14:15:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:15:34 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:15:34 Check angles 14:15:34 SkyScan query 14:15:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:15:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:15:34 Message to Master queued w/err=0: serial=277129 error=0 14:15:39 Received message from Master: op=Filter serial=277130 14:15:39 Color wheel filter change from 0 to 0 14:15:39 FLIGetFilterPos err=0 currentPosition=0 14:15:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:39 Filter is already there-color wheel unchanged 14:15:40 Received message from Master: op=Shutter serial=277131 14:15:40 Shutter LASER close 14:15:40 Received message from Camera: op=State serial=277133 14:15:40 GetSingleValue result=40 Value=cccccccc 14:15:40 SkyScan query 14:15:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:15:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:40 Parameters OK 14:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:40 Set A/D data flow result=40 14:15:40 Set A/D channel type result=40 14:15:40 Set A/D encoding result=40 14:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:40 Set channel filter=0.000000e+000 result=40 14:15:40 Config A/D Result=40 14:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:40 Get A/D filter: -9.255963e+061 result=40 14:15:40 Get A/D value=-858993460 result=40 14:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:40 Parameters OK 14:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:40 Set A/D data flow result=40 14:15:40 Set A/D channel type result=40 14:15:40 Set A/D encoding result=40 14:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:40 Set channel filter=0.000000e+000 result=40 14:15:40 Config A/D Result=40 14:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:40 Get A/D filter: -9.255963e+061 result=40 14:15:40 Get A/D value=-858993460 result=40 14:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:40 Aux= 14:15:40 Message to Camera, serial 277133 queued [UTC 2018-12-19 14:15:52] 14:16:17 Received message from Master: op=PointingHead serial=277146 14:16:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:16:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:16:17 Point started: ret=0 14:16:17 point_skyscan result=0 14:16:18 Check angles 14:16:18 SkyScan query 14:16:19 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.09<-17406 Statuses=0009 0009 14:16:19 Msec=0 True Az=108.825 Ze=-81.09 Az status=0009 Ze status=0009 14:16:19 Check angles 14:16:19 SkyScan query 14:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 14:16:20 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 14:16:20 Check angles 14:16:20 SkyScan query 14:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 14:16:20 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 14:16:21 Check angles 14:16:21 SkyScan query 14:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 14:16:21 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 14:16:21 Check angles 14:16:21 SkyScan query 14:16:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 14:16:22 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 14:16:22 Check angles 14:16:22 SkyScan query 14:16:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:16:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:16:23 Message to Master queued w/err=0: serial=277146 error=0 14:16:28 Received message from Master: op=Filter serial=277147 14:16:28 Color wheel filter change from 0 to 0 14:16:28 FLIGetFilterPos err=0 currentPosition=0 14:16:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:28 Filter is already there-color wheel unchanged 14:16:28 Received message from Master: op=Shutter serial=277148 14:16:28 Shutter LASER open 14:16:28 Received message from Camera: op=State serial=277150 14:16:28 GetSingleValue result=40 Value=cccccccc 14:16:28 SkyScan query 14:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:16:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:29 Parameters OK 14:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:29 Set A/D data flow result=40 14:16:29 Set A/D channel type result=40 14:16:29 Set A/D encoding result=40 14:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:29 Set channel filter=0.000000e+000 result=40 14:16:29 Config A/D Result=40 14:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:29 Get A/D filter: -9.255963e+061 result=40 14:16:29 Get A/D value=-858993460 result=40 14:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:29 Parameters OK 14:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:29 Set A/D data flow result=40 14:16:29 Set A/D channel type result=40 14:16:29 Set A/D encoding result=40 14:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:29 Set channel filter=0.000000e+000 result=40 14:16:29 Config A/D Result=40 14:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:29 Get A/D filter: -9.255963e+061 result=40 14:16:29 Get A/D value=-858993460 result=40 14:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:29 Aux= 14:16:29 Message to Camera, serial 277150 queued 14:16:37 Received message from Master: op=Shutter serial=277160 14:16:37 Shutter LASER close 14:16:37 Received message from Master: op=PointingHead serial=277164 14:16:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:16:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:16:38 Point started: ret=0 14:16:38 point_skyscan result=0 14:16:39 Check angles 14:16:39 SkyScan query 14:16:39 SkyScan query done: ret=0 az=90.09<-6006 ze=157.395<-1507 Statuses=0009 0009 14:16:39 Msec=0 True Az=90.09 Ze=157.395 Az status=0009 Ze status=0009 14:16:39 Check angles 14:16:39 SkyScan query 14:16:40 SkyScan query done: ret=0 az=72.6<-4840 ze=136.41<-2906 Statuses=0009 0009 14:16:40 Msec=750 True Az=72.6 Ze=136.41 Az status=0009 Ze status=0009 14:16:40 Check angles 14:16:40 SkyScan query 14:16:41 SkyScan query done: ret=0 az=55.14<-3676 ze=115.515<-4299 Statuses=0009 0009 14:16:41 Msec=1500 True Az=55.14 Ze=115.515 Az status=0009 Ze status=0009 14:16:41 Check angles 14:16:41 SkyScan query 14:16:41 SkyScan query done: ret=0 az=41.01<-2734 ze=94.5<-5700 Statuses=0009 0009 14:16:41 Msec=2250 True Az=41.01 Ze=94.5 Az status=0009 Ze status=0009 14:16:42 Check angles 14:16:42 SkyScan query 14:16:42 SkyScan query done: ret=0 az=40.995<-2733 ze=73.59<-7094 Statuses=0008 0009 14:16:42 Msec=3000 True Az=40.995 Ze=73.59 Az status=0008 Ze status=0009 14:16:42 Check angles 14:16:42 SkyScan query 14:16:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.95<-8470 Statuses=0008 0009 14:16:43 Msec=3750 True Az=40.995 Ze=52.95 Az status=0008 Ze status=0009 14:16:43 Check angles 14:16:43 SkyScan query 14:16:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:16:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:16:44 Message to Master queued w/err=0: serial=277164 error=0 14:16:49 Received message from Master: op=Filter serial=277165 14:16:49 Color wheel filter change from 0 to 0 14:16:49 FLIGetFilterPos err=0 currentPosition=0 14:16:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:49 Filter is already there-color wheel unchanged 14:16:49 Received message from Master: op=Shutter serial=277166 14:16:49 Shutter LASER close 14:16:49 Received message from Camera: op=State serial=277168 14:16:49 GetSingleValue result=40 Value=cccccccc 14:16:49 SkyScan query 14:16:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:16:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:50 Parameters OK 14:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:50 Set A/D data flow result=40 14:16:50 Set A/D channel type result=40 14:16:50 Set A/D encoding result=40 14:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:50 Set channel filter=0.000000e+000 result=40 14:16:50 Config A/D Result=40 14:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:50 Get A/D filter: -9.255963e+061 result=40 14:16:50 Get A/D value=-858993460 result=40 14:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:50 Parameters OK 14:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:50 Set A/D data flow result=40 14:16:50 Set A/D channel type result=40 14:16:50 Set A/D encoding result=40 14:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:50 Set channel filter=0.000000e+000 result=40 14:16:50 Config A/D Result=40 14:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:50 Get A/D filter: -9.255963e+061 result=40 14:16:50 Get A/D value=-858993460 result=40 14:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:50 Aux= 14:16:50 Message to Camera, serial 277168 queued 14:17:26 Received message from Master: op=PointingHead serial=277181 14:17:26 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:17:26 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:17:27 Point started: ret=0 14:17:27 point_skyscan result=0 14:17:27 Check angles 14:17:27 SkyScan query 14:17:28 SkyScan query done: ret=0 az=64.395<-4293 ze=66.54<-7564 Statuses=0009 0008 14:17:28 Msec=0 True Az=64.395 Ze=66.54 Az status=0009 Ze status=0008 14:17:28 Check angles 14:17:28 SkyScan query 14:17:29 SkyScan query done: ret=0 az=81.87<-5458 ze=66.51<-7566 Statuses=0009 0008 14:17:29 Msec=750 True Az=81.87 Ze=66.51 Az status=0009 Ze status=0008 14:17:29 Check angles 14:17:29 SkyScan query 14:17:30 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 14:17:30 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 14:17:30 Check angles 14:17:30 SkyScan query 14:17:30 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 14:17:30 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 14:17:30 Check angles 14:17:30 SkyScan query 14:17:31 SkyScan query done: ret=0 az=134.205<-8947 ze=66.495<-7567 Statuses=0009 0008 14:17:31 Msec=3000 True Az=134.205 Ze=66.495 Az status=0009 Ze status=0008 14:17:31 Check angles 14:17:31 SkyScan query 14:17:32 SkyScan query done: ret=0 az=151.65<-10110 ze=66.495<-7567 Statuses=0009 0008 14:17:32 Msec=3750 True Az=151.65 Ze=66.495 Az status=0009 Ze status=0008 14:17:32 Check angles 14:17:32 SkyScan query 14:17:33 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:17:33 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:17:33 Message to Master queued w/err=0: serial=277181 error=0 14:17:38 Received message from Master: op=Filter serial=277182 14:17:38 Color wheel filter change from 0 to 0 14:17:38 FLIGetFilterPos err=0 currentPosition=0 14:17:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:38 Filter is already there-color wheel unchanged 14:17:38 Received message from Master: op=Shutter serial=277183 14:17:38 Shutter LASER close 14:17:38 Received message from Camera: op=State serial=277185 14:17:38 GetSingleValue result=40 Value=cccccccc 14:17:38 SkyScan query 14:17:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:17:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:38 Parameters OK 14:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:38 Set A/D data flow result=40 14:17:38 Set A/D channel type result=40 14:17:38 Set A/D encoding result=40 14:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:38 Set channel filter=0.000000e+000 result=40 14:17:38 Config A/D Result=40 14:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:38 Get A/D filter: -9.255963e+061 result=40 14:17:38 Get A/D value=-858993460 result=40 14:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:38 Parameters OK 14:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:38 Set A/D data flow result=40 14:17:38 Set A/D channel type result=40 14:17:38 Set A/D encoding result=40 14:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:38 Set channel filter=0.000000e+000 result=40 14:17:38 Config A/D Result=40 14:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:38 Get A/D filter: -9.255963e+061 result=40 14:17:38 Get A/D value=-858993460 result=40 14:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:38 Aux= 14:17:38 Message to Camera, serial 277185 queued 14:18:15 Received message from Master: op=PointingHead serial=277198 14:18:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:18:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:18:16 Point started: ret=0 14:18:16 point_skyscan result=0 14:18:16 Check angles 14:18:16 SkyScan query 14:18:17 SkyScan query done: ret=0 az=135.06<-9004 ze=36.78<-9548 Statuses=0009 0009 14:18:17 Msec=0 True Az=135.06 Ze=36.78 Az status=0009 Ze status=0009 14:18:17 Check angles 14:18:17 SkyScan query 14:18:18 SkyScan query done: ret=0 az=117.6<-7840 ze=15.825<-10945 Statuses=0009 0009 14:18:18 Msec=750 True Az=117.6 Ze=15.825 Az status=0009 Ze status=0009 14:18:18 Check angles 14:18:18 SkyScan query 14:18:18 SkyScan query done: ret=0 az=100.155<-6677 ze=-5.115<-12341 Statuses=0009 0009 14:18:18 Msec=1500 True Az=100.155 Ze=-5.115 Az status=0009 Ze status=0009 14:18:19 Check angles 14:18:19 SkyScan query 14:18:19 SkyScan query done: ret=0 az=82.635<-5509 ze=-26.1<-13740 Statuses=0009 0009 14:18:19 Msec=2250 True Az=82.635 Ze=-26.1 Az status=0009 Ze status=0009 14:18:19 Check angles 14:18:19 SkyScan query 14:18:20 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.58<-14572 Statuses=0009 0008 14:18:20 Msec=3000 True Az=64.725 Ze=-38.58 Az status=0009 Ze status=0008 14:18:20 Check angles 14:18:20 SkyScan query 14:18:21 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.52<-14568 Statuses=0009 0008 14:18:21 Msec=3750 True Az=47.355 Ze=-38.52 Az status=0009 Ze status=0008 14:18:21 Check angles 14:18:21 SkyScan query 14:18:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:18:21 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:18:21 Message to Master queued w/err=0: serial=277198 error=0 14:18:26 Received message from Master: op=Filter serial=277199 14:18:26 Color wheel filter change from 0 to 0 14:18:26 FLIGetFilterPos err=0 currentPosition=0 14:18:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:26 Filter is already there-color wheel unchanged 14:18:27 Received message from Master: op=Shutter serial=277200 14:18:27 Shutter LASER close 14:18:27 Received message from Camera: op=State serial=277202 14:18:27 GetSingleValue result=40 Value=cccccccc 14:18:27 SkyScan query 14:18:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:18:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:27 Parameters OK 14:18:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:27 Set A/D data flow result=40 14:18:27 Set A/D channel type result=40 14:18:27 Set A/D encoding result=40 14:18:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:27 Set channel filter=0.000000e+000 result=40 14:18:27 Config A/D Result=40 14:18:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:27 Get A/D filter: -9.255963e+061 result=40 14:18:27 Get A/D value=-858993460 result=40 14:18:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:27 Parameters OK 14:18:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:27 Set A/D data flow result=40 14:18:27 Set A/D channel type result=40 14:18:27 Set A/D encoding result=40 14:18:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:27 Set channel filter=0.000000e+000 result=40 14:18:27 Config A/D Result=40 14:18:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:27 Get A/D filter: -9.255963e+061 result=40 14:18:27 Get A/D value=-858993460 result=40 14:18:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:27 Aux= 14:18:27 Message to Camera, serial 277202 queued 14:19:04 Received message from Master: op=PointingHead serial=277215 14:19:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:19:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:19:04 Point started: ret=0 14:19:04 point_skyscan result=0 14:19:05 Check angles 14:19:05 SkyScan query 14:19:06 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.415<-16561 Statuses=0009 0009 14:19:06 Msec=0 True Az=64.095 Ze=-68.415 Az status=0009 Ze status=0009 14:19:06 Check angles 14:19:06 SkyScan query 14:19:06 SkyScan query done: ret=0 az=81.975<-5465 ze=-89.805<-17987 Statuses=0009 0009 14:19:06 Msec=750 True Az=81.975 Ze=-89.805 Az status=0009 Ze status=0009 14:19:07 Check angles 14:19:07 SkyScan query 14:19:07 SkyScan query done: ret=0 az=99.48<-6632 ze=-110.82<-19388 Statuses=0009 0009 14:19:07 Msec=1500 True Az=99.48 Ze=-110.82 Az status=0009 Ze status=0009 14:19:07 Check angles 14:19:07 SkyScan query 14:19:08 SkyScan query done: ret=0 az=116.85<-7790 ze=-131.67<-20778 Statuses=0009 0009 14:19:08 Msec=2250 True Az=116.85 Ze=-131.67 Az status=0009 Ze status=0009 14:19:08 Check angles 14:19:08 SkyScan query 14:19:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 14:19:09 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 14:19:09 Check angles 14:19:09 SkyScan query 14:19:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:19:09 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:19:09 Message to Master queued w/err=0: serial=277215 error=0 14:19:14 Received message from Master: op=Filter serial=277216 14:19:14 Color wheel filter change from 0 to 0 14:19:14 FLIGetFilterPos err=0 currentPosition=0 14:19:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:14 Filter is already there-color wheel unchanged 14:19:15 Received message from Master: op=Shutter serial=277217 14:19:15 Shutter LASER close 14:19:15 Received message from Camera: op=State serial=277219 14:19:15 GetSingleValue result=40 Value=cccccccc 14:19:15 SkyScan query 14:19:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:19:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:15 Parameters OK 14:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:15 Set A/D data flow result=40 14:19:15 Set A/D channel type result=40 14:19:15 Set A/D encoding result=40 14:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:15 Set channel filter=0.000000e+000 result=40 14:19:15 Config A/D Result=40 14:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:15 Get A/D filter: -9.255963e+061 result=40 14:19:15 Get A/D value=-858993460 result=40 14:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:15 Parameters OK 14:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:15 Set A/D data flow result=40 14:19:15 Set A/D channel type result=40 14:19:15 Set A/D encoding result=40 14:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:15 Set channel filter=0.000000e+000 result=40 14:19:15 Config A/D Result=40 14:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:15 Get A/D filter: -9.255963e+061 result=40 14:19:15 Get A/D value=-858993460 result=40 14:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:15 Aux= 14:19:15 Message to Camera, serial 277219 queued 14:19:52 Received message from Master: op=PointingHead serial=277232 14:19:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:19:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:19:52 Point started: ret=0 14:19:52 point_skyscan result=0 14:19:53 Check angles 14:19:53 SkyScan query 14:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0009 0009 14:19:54 Msec=0 True Az=112.995 Ze=-171.03 Az status=0009 Ze status=0009 14:19:54 Check angles 14:19:54 SkyScan query 14:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:19:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:19:55 Message to Master queued w/err=0: serial=277232 error=0 14:20:00 Received message from Master: op=Filter serial=277233 14:20:00 Color wheel filter change from 0 to 0 14:20:00 FLIGetFilterPos err=0 currentPosition=0 14:20:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:00 Filter is already there-color wheel unchanged 14:20:00 Received message from Master: op=Shutter serial=277234 14:20:00 Shutter LASER open 14:20:00 Received message from Camera: op=State serial=277236 14:20:00 GetSingleValue result=40 Value=cccccccc 14:20:00 SkyScan query 14:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:20:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:00 Parameters OK 14:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:00 Set A/D data flow result=40 14:20:00 Set A/D channel type result=40 14:20:00 Set A/D encoding result=40 14:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:00 Set channel filter=0.000000e+000 result=40 14:20:00 Config A/D Result=40 14:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:00 Get A/D filter: -9.255963e+061 result=40 14:20:00 Get A/D value=-858993460 result=40 14:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:00 Parameters OK 14:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:00 Set A/D data flow result=40 14:20:00 Set A/D channel type result=40 14:20:00 Set A/D encoding result=40 14:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:00 Set channel filter=0.000000e+000 result=40 14:20:00 Config A/D Result=40 14:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:00 Get A/D filter: -9.255963e+061 result=40 14:20:00 Get A/D value=-858993460 result=40 14:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:00 Aux= 14:20:00 Message to Camera, serial 277236 queued 14:20:09 Received message from Master: op=Shutter serial=277246 14:20:09 Shutter LASER close 14:20:09 Received message from Master: op=PointingHead serial=277250 14:20:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:20:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:20:10 Point started: ret=0 14:20:10 point_skyscan result=0 14:20:11 Check angles 14:20:11 SkyScan query 14:20:11 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.935<-21529 Statuses=0009 0009 14:20:11 Msec=0 True Az=136.185 Ze=-142.935 Az status=0009 Ze status=0009 14:20:11 Check angles 14:20:11 SkyScan query 14:20:12 SkyScan query done: ret=0 az=153.645<-10243 ze=-121.98<-20132 Statuses=0009 0009 14:20:12 Msec=750 True Az=153.645 Ze=-121.98 Az status=0009 Ze status=0009 14:20:12 Check angles 14:20:12 SkyScan query 14:20:13 SkyScan query done: ret=0 az=171.15<-11410 ze=-100.98<-18732 Statuses=0009 0009 14:20:13 Msec=1500 True Az=171.15 Ze=-100.98 Az status=0009 Ze status=0009 14:20:13 Check angles 14:20:13 SkyScan query 14:20:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 14:20:13 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 14:20:14 Check angles 14:20:14 SkyScan query 14:20:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 14:20:14 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 14:20:14 Check angles 14:20:14 SkyScan query 14:20:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:20:15 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:20:15 Message to Master queued w/err=0: serial=277250 error=0 14:20:20 Received message from Master: op=Filter serial=277251 14:20:20 Color wheel filter change from 0 to 0 14:20:20 FLIGetFilterPos err=0 currentPosition=0 14:20:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:20 Filter is already there-color wheel unchanged 14:20:20 Received message from Master: op=Shutter serial=277252 14:20:20 Shutter LASER close 14:20:20 Received message from Camera: op=State serial=277254 14:20:20 GetSingleValue result=40 Value=cccccccc 14:20:20 SkyScan query 14:20:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:20:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:21 Parameters OK 14:20:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:21 Set A/D data flow result=40 14:20:21 Set A/D channel type result=40 14:20:21 Set A/D encoding result=40 14:20:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:21 Set channel filter=0.000000e+000 result=40 14:20:21 Config A/D Result=40 14:20:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:21 Get A/D filter: -9.255963e+061 result=40 14:20:21 Get A/D value=-858993460 result=40 14:20:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:21 Parameters OK 14:20:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:21 Set A/D data flow result=40 14:20:21 Set A/D channel type result=40 14:20:21 Set A/D encoding result=40 14:20:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:21 Set channel filter=0.000000e+000 result=40 14:20:21 Config A/D Result=40 14:20:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:21 Get A/D filter: -9.255963e+061 result=40 14:20:21 Get A/D value=-858993460 result=40 14:20:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:21 Aux= 14:20:21 Message to Camera, serial 277254 queued 14:20:58 Received message from Master: op=PointingHead serial=277267 14:20:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:20:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:20:58 Point started: ret=0 14:20:58 point_skyscan result=0 14:20:59 Check angles 14:20:59 SkyScan query 14:20:59 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.585<-13439 Statuses=0009 0009 14:20:59 Msec=0 True Az=152.925 Ze=-21.585 Az status=0009 Ze status=0009 14:20:59 Check angles 14:20:59 SkyScan query 14:21:00 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.615<-12041 Statuses=0009 0009 14:21:00 Msec=750 True Az=135.36 Ze=-0.615 Az status=0009 Ze status=0009 14:21:00 Check angles 14:21:00 SkyScan query 14:21:01 SkyScan query done: ret=0 az=117.975<-7865 ze=20.31<-10646 Statuses=0009 0009 14:21:01 Msec=1500 True Az=117.975 Ze=20.31 Az status=0009 Ze status=0009 14:21:01 Check angles 14:21:01 SkyScan query 14:21:02 SkyScan query done: ret=0 az=100.23<-6682 ze=41.7<-9220 Statuses=0009 0009 14:21:02 Msec=2250 True Az=100.23 Ze=41.7 Az status=0009 Ze status=0009 14:21:02 Check angles 14:21:02 SkyScan query 14:21:02 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 14:21:02 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 14:21:03 Check angles 14:21:03 SkyScan query 14:21:03 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 14:21:03 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 14:21:03 Message to Master queued w/err=0: serial=277267 error=0 14:21:08 Received message from Master: op=Filter serial=277268 14:21:08 Color wheel filter change from 0 to 0 14:21:08 FLIGetFilterPos err=0 currentPosition=0 14:21:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:08 Filter is already there-color wheel unchanged 14:21:08 Received message from Master: op=Shutter serial=277269 14:21:08 Shutter LASER close 14:21:08 Received message from Camera: op=State serial=277271 14:21:08 GetSingleValue result=40 Value=cccccccc 14:21:08 SkyScan query 14:21:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:21:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:09 Parameters OK 14:21:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:09 Set A/D data flow result=40 14:21:09 Set A/D channel type result=40 14:21:09 Set A/D encoding result=40 14:21:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:09 Set channel filter=0.000000e+000 result=40 14:21:09 Config A/D Result=40 14:21:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:09 Get A/D filter: -9.255963e+061 result=40 14:21:09 Get A/D value=-858993460 result=40 14:21:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:09 Parameters OK 14:21:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:09 Set A/D data flow result=40 14:21:09 Set A/D channel type result=40 14:21:09 Set A/D encoding result=40 14:21:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:09 Set channel filter=0.000000e+000 result=40 14:21:09 Config A/D Result=40 14:21:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:09 Get A/D filter: -9.255963e+061 result=40 14:21:09 Get A/D value=-858993460 result=40 14:21:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:09 Aux= 14:21:09 Message to Camera, serial 277271 queued 14:21:45 Received message from Master: op=PointingHead serial=277283 14:21:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:21:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:21:45 Point started: ret=0 14:21:45 point_skyscan result=0 14:21:46 Check angles 14:21:46 SkyScan query 14:21:46 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 14:21:46 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 14:21:47 Check angles 14:21:47 SkyScan query 14:21:47 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 14:21:47 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 14:21:47 Check angles 14:21:47 SkyScan query 14:21:48 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 14:21:48 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 14:21:48 Check angles 14:21:48 SkyScan query 14:21:49 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 14:21:49 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 14:21:49 Check angles 14:21:49 SkyScan query 14:21:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:21:49 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:21:50 Check angles 14:21:50 SkyScan query 14:21:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:21:50 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:21:50 Message to Master queued w/err=0: serial=277283 error=0 14:21:55 Received message from Master: op=Filter serial=277284 14:21:55 Color wheel filter change from 0 to 0 14:21:55 FLIGetFilterPos err=0 currentPosition=0 14:21:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:55 Filter is already there-color wheel unchanged 14:21:55 Received message from Master: op=Shutter serial=277285 14:21:55 Shutter LASER close 14:21:55 Received message from Camera: op=State serial=277287 14:21:55 GetSingleValue result=40 Value=cccccccc 14:21:55 SkyScan query 14:21:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:21:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:56 Parameters OK 14:21:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:56 Set A/D data flow result=40 14:21:56 Set A/D channel type result=40 14:21:56 Set A/D encoding result=40 14:21:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:56 Set channel filter=0.000000e+000 result=40 14:21:56 Config A/D Result=40 14:21:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:56 Get A/D filter: -9.255963e+061 result=40 14:21:56 Get A/D value=-858993460 result=40 14:21:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:56 Parameters OK 14:21:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:56 Set A/D data flow result=40 14:21:56 Set A/D channel type result=40 14:21:56 Set A/D encoding result=40 14:21:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:56 Set channel filter=0.000000e+000 result=40 14:21:56 Config A/D Result=40 14:21:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:56 Get A/D filter: -9.255963e+061 result=40 14:21:56 Get A/D value=-858993460 result=40 14:21:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:56 Aux= 14:21:56 Message to Camera, serial 277287 queued 14:22:33 Received message from Master: op=PointingHead serial=277300 14:22:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:22:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:22:33 Point started: ret=0 14:22:33 point_skyscan result=0 14:22:34 Check angles 14:22:34 SkyScan query 14:22:35 SkyScan query done: ret=0 az=152.73<-10182 ze=8.445<-11437 Statuses=0009 0009 14:22:35 Msec=0 True Az=152.73 Ze=8.445 Az status=0009 Ze status=0009 14:22:35 Check angles 14:22:35 SkyScan query 14:22:35 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.465<-12831 Statuses=0009 0009 14:22:35 Msec=750 True Az=135.375 Ze=-12.465 Az status=0009 Ze status=0009 14:22:35 Check angles 14:22:35 SkyScan query 14:22:36 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.48<-14232 Statuses=0009 0009 14:22:36 Msec=1500 True Az=117.825 Ze=-33.48 Az status=0009 Ze status=0009 14:22:36 Check angles 14:22:36 SkyScan query 14:22:37 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.57<-15438 Statuses=0009 0009 14:22:37 Msec=2250 True Az=100.065 Ze=-51.57 Az status=0009 Ze status=0009 14:22:37 Check angles 14:22:37 SkyScan query 14:22:38 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:22:38 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:22:38 Check angles 14:22:38 SkyScan query 14:22:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:22:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:22:38 Message to Master queued w/err=0: serial=277300 error=0 14:22:43 Received message from Master: op=Filter serial=277301 14:22:43 Color wheel filter change from 0 to 0 14:22:43 FLIGetFilterPos err=0 currentPosition=0 14:22:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:43 Filter is already there-color wheel unchanged 14:22:43 Received message from Master: op=Shutter serial=277302 14:22:43 Shutter LASER close 14:22:44 Received message from Camera: op=State serial=277304 14:22:44 GetSingleValue result=40 Value=cccccccc 14:22:44 SkyScan query 14:22:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:22:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:44 Parameters OK 14:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:44 Set A/D data flow result=40 14:22:44 Set A/D channel type result=40 14:22:44 Set A/D encoding result=40 14:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:44 Set channel filter=0.000000e+000 result=40 14:22:44 Config A/D Result=40 14:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:44 Get A/D filter: -9.255963e+061 result=40 14:22:44 Get A/D value=-858993460 result=40 14:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:44 Parameters OK 14:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:44 Set A/D data flow result=40 14:22:44 Set A/D channel type result=40 14:22:44 Set A/D encoding result=40 14:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:44 Set channel filter=0.000000e+000 result=40 14:22:44 Config A/D Result=40 14:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:44 Get A/D filter: -9.255963e+061 result=40 14:22:44 Get A/D value=-858993460 result=40 14:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:44 Aux= 14:22:44 Message to Camera, serial 277304 queued 14:23:21 Received message from Master: op=PointingHead serial=277317 14:23:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:23:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:23:21 Point started: ret=0 14:23:21 point_skyscan result=0 14:23:22 Check angles 14:23:22 SkyScan query 14:23:23 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.21<-17414 Statuses=0009 0009 14:23:23 Msec=0 True Az=108.96 Ze=-81.21 Az status=0009 Ze status=0009 14:23:23 Check angles 14:23:23 SkyScan query 14:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 14:23:23 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 14:23:24 Check angles 14:23:24 SkyScan query 14:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 14:23:24 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 14:23:24 Check angles 14:23:24 SkyScan query 14:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 14:23:25 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 14:23:25 Check angles 14:23:25 SkyScan query 14:23:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.51<-23034 Statuses=0008 0009 14:23:26 Msec=3000 True Az=112.995 Ze=-165.51 Az status=0008 Ze status=0009 14:23:26 Check angles 14:23:26 SkyScan query 14:23:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:23:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:23:26 Message to Master queued w/err=0: serial=277317 error=0 14:23:31 Received message from Master: op=Filter serial=277318 14:23:31 Color wheel filter change from 0 to 0 14:23:31 FLIGetFilterPos err=0 currentPosition=0 14:23:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:31 Filter is already there-color wheel unchanged 14:23:32 Received message from Master: op=Shutter serial=277319 14:23:32 Shutter LASER open 14:23:32 Received message from Camera: op=State serial=277321 14:23:32 GetSingleValue result=40 Value=cccccccc 14:23:32 SkyScan query 14:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:23:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:32 Parameters OK 14:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:32 Set A/D data flow result=40 14:23:32 Set A/D channel type result=40 14:23:32 Set A/D encoding result=40 14:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:32 Set channel filter=0.000000e+000 result=40 14:23:32 Config A/D Result=40 14:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:32 Get A/D filter: -9.255963e+061 result=40 14:23:32 Get A/D value=-858993460 result=40 14:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:32 Parameters OK 14:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:32 Set A/D data flow result=40 14:23:32 Set A/D channel type result=40 14:23:32 Set A/D encoding result=40 14:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:32 Set channel filter=0.000000e+000 result=40 14:23:32 Config A/D Result=40 14:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:32 Get A/D filter: -9.255963e+061 result=40 14:23:32 Get A/D value=-858993460 result=40 14:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:32 Aux= 14:23:32 Message to Camera, serial 277321 queued 14:23:41 Received message from Master: op=Shutter serial=277331 14:23:41 Shutter LASER close 14:23:41 Received message from Master: op=PointingHead serial=277335 14:23:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:23:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:23:42 Point started: ret=0 14:23:42 point_skyscan result=0 14:23:42 Check angles 14:23:42 SkyScan query 14:23:43 SkyScan query done: ret=0 az=90.165<-6011 ze=157.53<-1498 Statuses=0009 0009 14:23:43 Msec=0 True Az=90.165 Ze=157.53 Az status=0009 Ze status=0009 14:23:43 Check angles 14:23:43 SkyScan query 14:23:44 SkyScan query done: ret=0 az=72.315<-4821 ze=136.14<-2924 Statuses=0009 0009 14:23:44 Msec=750 True Az=72.315 Ze=136.14 Az status=0009 Ze status=0009 14:23:44 Check angles 14:23:44 SkyScan query 14:23:44 SkyScan query done: ret=0 az=54.825<-3655 ze=115.155<-4323 Statuses=0009 0009 14:23:44 Msec=1500 True Az=54.825 Ze=115.155 Az status=0009 Ze status=0009 14:23:45 Check angles 14:23:45 SkyScan query 14:23:45 SkyScan query done: ret=0 az=40.995<-2733 ze=94.2<-5720 Statuses=0009 0009 14:23:45 Msec=2250 True Az=40.995 Ze=94.2 Az status=0009 Ze status=0009 14:23:45 Check angles 14:23:45 SkyScan query 14:23:46 SkyScan query done: ret=0 az=40.995<-2733 ze=73.215<-7119 Statuses=0008 0009 14:23:46 Msec=3000 True Az=40.995 Ze=73.215 Az status=0008 Ze status=0009 14:23:46 Check angles 14:23:46 SkyScan query 14:23:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 14:23:47 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 14:23:47 Check angles 14:23:47 SkyScan query 14:23:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:23:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:23:47 Message to Master queued w/err=0: serial=277335 error=0 14:23:52 Received message from Master: op=Filter serial=277336 14:23:52 Color wheel filter change from 0 to 0 14:23:52 FLIGetFilterPos err=0 currentPosition=0 14:23:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:52 Filter is already there-color wheel unchanged 14:23:53 Received message from Master: op=Shutter serial=277337 14:23:53 Shutter LASER close 14:23:53 Received message from Camera: op=State serial=277339 14:23:53 GetSingleValue result=40 Value=cccccccc 14:23:53 SkyScan query 14:23:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:23:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:53 Parameters OK 14:23:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:53 Set A/D data flow result=40 14:23:53 Set A/D channel type result=40 14:23:53 Set A/D encoding result=40 14:23:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:53 Set channel filter=0.000000e+000 result=40 14:23:53 Config A/D Result=40 14:23:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:53 Get A/D filter: -9.255963e+061 result=40 14:23:53 Get A/D value=-858993460 result=40 14:23:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:53 Parameters OK 14:23:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:53 Set A/D data flow result=40 14:23:53 Set A/D channel type result=40 14:23:53 Set A/D encoding result=40 14:23:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:53 Set channel filter=0.000000e+000 result=40 14:23:53 Config A/D Result=40 14:23:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:53 Get A/D filter: -9.255963e+061 result=40 14:23:53 Get A/D value=-858993460 result=40 14:23:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:53 Aux= 14:23:53 Message to Camera, serial 277339 queued 14:24:30 Received message from Master: op=PointingHead serial=277352 14:24:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:24:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:24:30 Point started: ret=0 14:24:30 point_skyscan result=0 14:24:31 Check angles 14:24:31 SkyScan query 14:24:32 SkyScan query done: ret=0 az=63.795<-4253 ze=66.525<-7565 Statuses=0009 0008 14:24:32 Msec=0 True Az=63.795 Ze=66.525 Az status=0009 Ze status=0008 14:24:32 Check angles 14:24:32 SkyScan query 14:24:33 SkyScan query done: ret=0 az=81.075<-5405 ze=66.51<-7566 Statuses=0009 0008 14:24:33 Msec=750 True Az=81.075 Ze=66.51 Az status=0009 Ze status=0008 14:24:33 Check angles 14:24:33 SkyScan query 14:24:33 SkyScan query done: ret=0 az=98.655<-6577 ze=66.495<-7567 Statuses=0009 0008 14:24:33 Msec=1500 True Az=98.655 Ze=66.495 Az status=0009 Ze status=0008 14:24:33 Check angles 14:24:33 SkyScan query 14:24:34 SkyScan query done: ret=0 az=116.055<-7737 ze=66.495<-7567 Statuses=0009 0008 14:24:34 Msec=2250 True Az=116.055 Ze=66.495 Az status=0009 Ze status=0008 14:24:34 Check angles 14:24:34 SkyScan query 14:24:35 SkyScan query done: ret=0 az=133.515<-8901 ze=66.495<-7567 Statuses=0009 0008 14:24:35 Msec=3000 True Az=133.515 Ze=66.495 Az status=0009 Ze status=0008 14:24:35 Check angles 14:24:35 SkyScan query 14:24:36 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 14:24:36 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 14:24:36 Check angles 14:24:36 SkyScan query 14:24:36 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:24:36 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:24:36 Message to Master queued w/err=0: serial=277352 error=0 14:24:41 Received message from Master: op=Filter serial=277353 14:24:41 Color wheel filter change from 0 to 0 14:24:41 FLIGetFilterPos err=0 currentPosition=0 14:24:41 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:41 Filter is already there-color wheel unchanged 14:24:41 Received message from Master: op=Shutter serial=277354 14:24:41 Shutter LASER close 14:24:42 Received message from Camera: op=State serial=277356 14:24:42 GetSingleValue result=40 Value=cccccccc 14:24:42 SkyScan query 14:24:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:24:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:42 Parameters OK 14:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:42 Set A/D data flow result=40 14:24:42 Set A/D channel type result=40 14:24:42 Set A/D encoding result=40 14:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:42 Set channel filter=0.000000e+000 result=40 14:24:42 Config A/D Result=40 14:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:42 Get A/D filter: -9.255963e+061 result=40 14:24:42 Get A/D value=-858993460 result=40 14:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:42 Parameters OK 14:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:42 Set A/D data flow result=40 14:24:42 Set A/D channel type result=40 14:24:42 Set A/D encoding result=40 14:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:42 Set channel filter=0.000000e+000 result=40 14:24:42 Config A/D Result=40 14:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:42 Get A/D filter: -9.255963e+061 result=40 14:24:42 Get A/D value=-858993460 result=40 14:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:42 Aux= 14:24:42 Message to Camera, serial 277356 queued 14:25:19 Received message from Master: op=PointingHead serial=277369 14:25:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:25:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:25:19 Point started: ret=0 14:25:19 point_skyscan result=0 14:25:20 Check angles 14:25:20 SkyScan query 14:25:21 SkyScan query done: ret=0 az=134.82<-8988 ze=36.66<-9556 Statuses=0009 0009 14:25:21 Msec=0 True Az=134.82 Ze=36.66 Az status=0009 Ze status=0009 14:25:21 Check angles 14:25:21 SkyScan query 14:25:21 SkyScan query done: ret=0 az=117.495<-7833 ze=15.72<-10952 Statuses=0009 0009 14:25:21 Msec=750 True Az=117.495 Ze=15.72 Az status=0009 Ze status=0009 14:25:22 Check angles 14:25:22 SkyScan query 14:25:22 SkyScan query done: ret=0 az=100.125<-6675 ze=-5.235<-12349 Statuses=0009 0009 14:25:22 Msec=1500 True Az=100.125 Ze=-5.235 Az status=0009 Ze status=0009 14:25:22 Check angles 14:25:22 SkyScan query 14:25:23 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.7<-13780 Statuses=0009 0009 14:25:23 Msec=2250 True Az=82.215 Ze=-26.7 Az status=0009 Ze status=0009 14:25:23 Check angles 14:25:23 SkyScan query 14:25:24 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.58<-14572 Statuses=0009 0008 14:25:24 Msec=3000 True Az=64.695 Ze=-38.58 Az status=0009 Ze status=0008 14:25:24 Check angles 14:25:24 SkyScan query 14:25:24 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.52<-14568 Statuses=0009 0008 14:25:24 Msec=3750 True Az=47.19 Ze=-38.52 Az status=0009 Ze status=0008 14:25:25 Check angles 14:25:25 SkyScan query 14:25:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:25:25 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:25:25 Message to Master queued w/err=0: serial=277369 error=0 14:25:30 Received message from Master: op=Filter serial=277370 14:25:30 Color wheel filter change from 0 to 0 14:25:30 FLIGetFilterPos err=0 currentPosition=0 14:25:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:30 Filter is already there-color wheel unchanged 14:25:30 Received message from Master: op=Shutter serial=277371 14:25:30 Shutter LASER close 14:25:30 Received message from Camera: op=State serial=277373 14:25:30 GetSingleValue result=40 Value=cccccccc 14:25:30 SkyScan query 14:25:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:25:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:31 Parameters OK 14:25:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:31 Set A/D data flow result=40 14:25:31 Set A/D channel type result=40 14:25:31 Set A/D encoding result=40 14:25:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:31 Set channel filter=0.000000e+000 result=40 14:25:31 Config A/D Result=40 14:25:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:31 Get A/D filter: -9.255963e+061 result=40 14:25:31 Get A/D value=-858993460 result=40 14:25:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:31 Parameters OK 14:25:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:31 Set A/D data flow result=40 14:25:31 Set A/D channel type result=40 14:25:31 Set A/D encoding result=40 14:25:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:31 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-19 14:25:31] 14:25:31 Config A/D Result=40 14:25:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:31 Get A/D filter: -9.255963e+061 result=40 14:25:31 Get A/D value=-858993460 result=40 14:25:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:31 Aux= 14:25:31 Message to Camera, serial 277373 queued 14:26:08 Received message from Master: op=PointingHead serial=277386 14:26:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:26:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:26:08 Point started: ret=0 14:26:08 point_skyscan result=0 14:26:09 Check angles 14:26:09 SkyScan query 14:26:09 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.235<-16549 Statuses=0009 0009 14:26:09 Msec=0 True Az=64.275 Ze=-68.235 Az status=0009 Ze status=0009 14:26:10 Check angles 14:26:10 SkyScan query 14:26:10 SkyScan query done: ret=0 az=81.93<-5462 ze=-89.655<-17977 Statuses=0009 0009 14:26:10 Msec=750 True Az=81.93 Ze=-89.655 Az status=0009 Ze status=0009 14:26:10 Check angles 14:26:10 SkyScan query 14:26:11 SkyScan query done: ret=0 az=99.885<-6659 ze=-111.03<-19402 Statuses=0009 0009 14:26:11 Msec=1500 True Az=99.885 Ze=-111.03 Az status=0009 Ze status=0009 14:26:11 Check angles 14:26:11 SkyScan query 14:26:12 SkyScan query done: ret=0 az=117.645<-7843 ze=-132.405<-20827 Statuses=0009 0009 14:26:12 Msec=2250 True Az=117.645 Ze=-132.405 Az status=0009 Ze status=0009 14:26:12 Check angles 14:26:12 SkyScan query 14:26:12 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 14:26:12 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 14:26:13 Check angles 14:26:13 SkyScan query 14:26:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:26:13 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:26:13 Message to Master queued w/err=0: serial=277386 error=0 14:26:18 Received message from Master: op=Filter serial=277387 14:26:18 Color wheel filter change from 0 to 0 14:26:18 FLIGetFilterPos err=0 currentPosition=0 14:26:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:18 Filter is already there-color wheel unchanged 14:26:18 Received message from Master: op=Shutter serial=277388 14:26:18 Shutter LASER close 14:26:18 Received message from Camera: op=State serial=277390 14:26:18 GetSingleValue result=40 Value=cccccccc 14:26:18 SkyScan query 14:26:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:26:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:19 Parameters OK 14:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:19 Set A/D data flow result=40 14:26:19 Set A/D channel type result=40 14:26:19 Set A/D encoding result=40 14:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:19 Set channel filter=0.000000e+000 result=40 14:26:19 Config A/D Result=40 14:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:19 Get A/D filter: -9.255963e+061 result=40 14:26:19 Get A/D value=-858993460 result=40 14:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:19 Parameters OK 14:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:19 Set A/D data flow result=40 14:26:19 Set A/D channel type result=40 14:26:19 Set A/D encoding result=40 14:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:19 Set channel filter=0.000000e+000 result=40 14:26:19 Config A/D Result=40 14:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:19 Get A/D filter: -9.255963e+061 result=40 14:26:19 Get A/D value=-858993460 result=40 14:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:19 Aux= 14:26:19 Message to Camera, serial 277390 queued 14:26:55 Received message from Master: op=PointingHead serial=277402 14:26:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:26:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:26:55 Point started: ret=0 14:26:55 point_skyscan result=0 14:26:56 Check angles 14:26:56 SkyScan query 14:26:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 14:26:57 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 14:26:57 Check angles 14:26:57 SkyScan query 14:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:26:57 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:26:57 Message to Master queued w/err=0: serial=277402 error=0 14:27:02 Received message from Master: op=Filter serial=277403 14:27:02 Color wheel filter change from 0 to 0 14:27:02 FLIGetFilterPos err=0 currentPosition=0 14:27:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:02 Filter is already there-color wheel unchanged 14:27:03 Received message from Master: op=Shutter serial=277404 14:27:03 Shutter LASER open 14:27:03 Received message from Camera: op=State serial=277406 14:27:03 GetSingleValue result=40 Value=cccccccc 14:27:03 SkyScan query 14:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:27:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:03 Parameters OK 14:27:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:03 Set A/D data flow result=40 14:27:03 Set A/D channel type result=40 14:27:03 Set A/D encoding result=40 14:27:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:03 Set channel filter=0.000000e+000 result=40 14:27:03 Config A/D Result=40 14:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:03 Get A/D filter: -9.255963e+061 result=40 14:27:03 Get A/D value=-858993460 result=40 14:27:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:03 Parameters OK 14:27:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:03 Set A/D data flow result=40 14:27:03 Set A/D channel type result=40 14:27:03 Set A/D encoding result=40 14:27:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:03 Set channel filter=0.000000e+000 result=40 14:27:03 Config A/D Result=40 14:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:03 Get A/D filter: -9.255963e+061 result=40 14:27:03 Get A/D value=-858993460 result=40 14:27:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:03 Aux= 14:27:03 Message to Camera, serial 277406 queued 14:27:12 Received message from Master: op=Shutter serial=277416 14:27:12 Shutter LASER close 14:27:12 Received message from Master: op=PointingHead serial=277420 14:27:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:27:12 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:27:13 Point started: ret=0 14:27:13 point_skyscan result=0 14:27:13 Check angles 14:27:13 SkyScan query 14:27:14 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.37<-21558 Statuses=0009 0009 14:27:14 Msec=0 True Az=135.84 Ze=-143.37 Az status=0009 Ze status=0009 14:27:14 Check angles 14:27:14 SkyScan query 14:27:15 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.415<-20161 Statuses=0009 0009 14:27:15 Msec=750 True Az=153.3 Ze=-122.415 Az status=0009 Ze status=0009 14:27:15 Check angles 14:27:15 SkyScan query 14:27:15 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.01<-18734 Statuses=0009 0009 14:27:15 Msec=1500 True Az=171.18 Ze=-101.01 Az status=0009 Ze status=0009 14:27:16 Check angles 14:27:16 SkyScan query 14:27:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.145<-17343 Statuses=0008 0009 14:27:16 Msec=2250 True Az=175.995 Ze=-80.145 Az status=0008 Ze status=0009 14:27:16 Check angles 14:27:16 SkyScan query 14:27:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.145<-15943 Statuses=0008 0009 14:27:17 Msec=3000 True Az=175.995 Ze=-59.145 Az status=0008 Ze status=0009 14:27:17 Check angles 14:27:17 SkyScan query 14:27:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 14:27:18 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 14:27:18 Message to Master queued w/err=0: serial=277420 error=0 14:27:23 Received message from Master: op=Filter serial=277421 14:27:23 Color wheel filter change from 0 to 0 14:27:23 FLIGetFilterPos err=0 currentPosition=0 14:27:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:23 Filter is already there-color wheel unchanged 14:27:23 Received message from Master: op=Shutter serial=277422 14:27:23 Shutter LASER close 14:27:23 Received message from Camera: op=State serial=277424 14:27:23 GetSingleValue result=40 Value=cccccccc 14:27:23 SkyScan query 14:27:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:27:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:24 Parameters OK 14:27:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:24 Set A/D data flow result=40 14:27:24 Set A/D channel type result=40 14:27:24 Set A/D encoding result=40 14:27:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:24 Set channel filter=0.000000e+000 result=40 14:27:24 Config A/D Result=40 14:27:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:24 Get A/D filter: -9.255963e+061 result=40 14:27:24 Get A/D value=-858993460 result=40 14:27:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:24 Parameters OK 14:27:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:24 Set A/D data flow result=40 14:27:24 Set A/D channel type result=40 14:27:24 Set A/D encoding result=40 14:27:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:24 Set channel filter=0.000000e+000 result=40 14:27:24 Config A/D Result=40 14:27:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:24 Get A/D filter: -9.255963e+061 result=40 14:27:24 Get A/D value=-858993460 result=40 14:27:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:24 Aux= 14:27:24 Message to Camera, serial 277424 queued 14:28:00 Received message from Master: op=PointingHead serial=277437 14:28:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:28:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:28:01 Point started: ret=0 14:28:01 point_skyscan result=0 14:28:02 Check angles 14:28:02 SkyScan query 14:28:02 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.885<-13459 Statuses=0009 0009 14:28:02 Msec=0 True Az=153.165 Ze=-21.885 Az status=0009 Ze status=0009 14:28:02 Check angles 14:28:02 SkyScan query 14:28:03 SkyScan query done: ret=0 az=135.705<-9047 ze=-1.005<-12067 Statuses=0009 0009 14:28:03 Msec=750 True Az=135.705 Ze=-1.005 Az status=0009 Ze status=0009 14:28:03 Check angles 14:28:03 SkyScan query 14:28:04 SkyScan query done: ret=0 az=117.825<-7855 ze=20.385<-10641 Statuses=0009 0009 14:28:04 Msec=1500 True Az=117.825 Ze=20.385 Az status=0009 Ze status=0009 14:28:04 Check angles 14:28:04 SkyScan query 14:28:04 SkyScan query done: ret=0 az=100.32<-6688 ze=41.355<-9243 Statuses=0009 0009 14:28:04 Msec=2250 True Az=100.32 Ze=41.355 Az status=0009 Ze status=0009 14:28:05 Check angles 14:28:05 SkyScan query 14:28:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 14:28:05 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 14:28:05 Check angles 14:28:05 SkyScan query 14:28:06 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 14:28:06 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 14:28:06 Message to Master queued w/err=0: serial=277437 error=0 14:28:11 Received message from Master: op=Filter serial=277438 14:28:11 Color wheel filter change from 0 to 0 14:28:11 FLIGetFilterPos err=0 currentPosition=0 14:28:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:11 Filter is already there-color wheel unchanged 14:28:11 Received message from Master: op=Shutter serial=277439 14:28:11 Shutter LASER close 14:28:11 Received message from Camera: op=State serial=277441 14:28:11 GetSingleValue result=40 Value=cccccccc 14:28:11 SkyScan query 14:28:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:28:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:12 Parameters OK 14:28:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:12 Set A/D data flow result=40 14:28:12 Set A/D channel type result=40 14:28:12 Set A/D encoding result=40 14:28:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:12 Set channel filter=0.000000e+000 result=40 14:28:12 Config A/D Result=40 14:28:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:12 Get A/D filter: -9.255963e+061 result=40 14:28:12 Get A/D value=-858993460 result=40 14:28:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:12 Parameters OK 14:28:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:12 Set A/D data flow result=40 14:28:12 Set A/D channel type result=40 14:28:12 Set A/D encoding result=40 14:28:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:12 Set channel filter=0.000000e+000 result=40 14:28:12 Config A/D Result=40 14:28:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:12 Get A/D filter: -9.255963e+061 result=40 14:28:12 Get A/D value=-858993460 result=40 14:28:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:12 Aux= 14:28:12 Message to Camera, serial 277441 queued 14:28:49 Received message from Master: op=PointingHead serial=277454 14:28:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:28:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:28:49 Point started: ret=0 14:28:49 point_skyscan result=0 14:28:50 Check angles 14:28:50 SkyScan query 14:28:50 SkyScan query done: ret=0 az=109.155<-7277 ze=38.475<-9435 Statuses=0009 0008 14:28:50 Msec=0 True Az=109.155 Ze=38.475 Az status=0009 Ze status=0008 14:28:50 Check angles 14:28:50 SkyScan query 14:28:51 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 14:28:51 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 14:28:51 Check angles 14:28:51 SkyScan query 14:28:52 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 14:28:52 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 14:28:52 Check angles 14:28:52 SkyScan query 14:28:53 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 14:28:53 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 14:28:53 Check angles 14:28:53 SkyScan query 14:28:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:28:53 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:28:54 Check angles 14:28:54 SkyScan query 14:28:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:28:54 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:28:54 Message to Master queued w/err=0: serial=277454 error=0 14:28:59 Received message from Master: op=Filter serial=277455 14:28:59 Color wheel filter change from 0 to 0 14:28:59 FLIGetFilterPos err=0 currentPosition=0 14:28:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:59 Filter is already there-color wheel unchanged 14:28:59 Received message from Master: op=Shutter serial=277456 14:28:59 Shutter LASER close 14:28:59 Received message from Camera: op=State serial=277458 14:28:59 GetSingleValue result=40 Value=cccccccc 14:28:59 SkyScan query 14:29:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:29:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:00 Parameters OK 14:29:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:00 Set A/D data flow result=40 14:29:00 Set A/D channel type result=40 14:29:00 Set A/D encoding result=40 14:29:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:00 Set channel filter=0.000000e+000 result=40 14:29:00 Config A/D Result=40 14:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:00 Get A/D filter: -9.255963e+061 result=40 14:29:00 Get A/D value=-858993460 result=40 14:29:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:00 Parameters OK 14:29:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:00 Set A/D data flow result=40 14:29:00 Set A/D channel type result=40 14:29:00 Set A/D encoding result=40 14:29:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:00 Set channel filter=0.000000e+000 result=40 14:29:00 Config A/D Result=40 14:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:00 Get A/D filter: -9.255963e+061 result=40 14:29:00 Get A/D value=-858993460 result=40 14:29:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:00 Aux= 14:29:00 Message to Camera, serial 277458 queued 14:29:37 Received message from Master: op=PointingHead serial=277471 14:29:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:29:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:29:37 Point started: ret=0 14:29:37 point_skyscan result=0 14:29:38 Check angles 14:29:38 SkyScan query 14:29:38 SkyScan query done: ret=0 az=153.18<-10212 ze=9.015<-11399 Statuses=0009 0009 14:29:38 Msec=0 True Az=153.18 Ze=9.015 Az status=0009 Ze status=0009 14:29:39 Check angles 14:29:39 SkyScan query 14:29:39 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.435<-12829 Statuses=0009 0009 14:29:39 Msec=750 True Az=135.345 Ze=-12.435 Az status=0009 Ze status=0009 14:29:39 Check angles 14:29:39 SkyScan query 14:29:40 SkyScan query done: ret=0 az=117.48<-7832 ze=-33.825<-14255 Statuses=0009 0009 14:29:40 Msec=1500 True Az=117.48 Ze=-33.825 Az status=0009 Ze status=0009 14:29:40 Check angles 14:29:40 SkyScan query 14:29:41 SkyScan query done: ret=0 az=100.125<-6675 ze=-51.57<-15438 Statuses=0009 0009 14:29:41 Msec=2250 True Az=100.125 Ze=-51.57 Az status=0009 Ze status=0009 14:29:41 Check angles 14:29:41 SkyScan query 14:29:41 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:29:41 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:29:42 Check angles 14:29:42 SkyScan query 14:29:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:29:42 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:29:42 Message to Master queued w/err=0: serial=277471 error=0 14:29:47 Received message from Master: op=Filter serial=277472 14:29:47 Color wheel filter change from 0 to 0 14:29:47 FLIGetFilterPos err=0 currentPosition=0 14:29:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:47 Filter is already there-color wheel unchanged 14:29:47 Received message from Master: op=Shutter serial=277473 14:29:47 Shutter LASER close 14:29:47 Received message from Camera: op=State serial=277475 14:29:47 GetSingleValue result=40 Value=cccccccc 14:29:47 SkyScan query 14:29:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:29:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:48 Parameters OK 14:29:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:48 Set A/D data flow result=40 14:29:48 Set A/D channel type result=40 14:29:48 Set A/D encoding result=40 14:29:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:48 Set channel filter=0.000000e+000 result=40 14:29:48 Config A/D Result=40 14:29:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:48 Get A/D filter: -9.255963e+061 result=40 14:29:48 Get A/D value=-858993460 result=40 14:29:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:48 Parameters OK 14:29:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:48 Set A/D data flow result=40 14:29:48 Set A/D channel type result=40 14:29:48 Set A/D encoding result=40 14:29:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:48 Set channel filter=0.000000e+000 result=40 14:29:48 Config A/D Result=40 14:29:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:48 Get A/D filter: -9.255963e+061 result=40 14:29:48 Get A/D value=-858993460 result=40 14:29:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:48 Aux= 14:29:48 Message to Camera, serial 277475 queued 14:30:25 Received message from Master: op=PointingHead serial=277488 14:30:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:30:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:30:25 Point started: ret=0 14:30:25 point_skyscan result=0 14:30:26 Check angles 14:30:26 SkyScan query 14:30:26 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.465<-17431 Statuses=0009 0009 14:30:26 Msec=0 True Az=109.395 Ze=-81.465 Az status=0009 Ze status=0009 14:30:27 Check angles 14:30:27 SkyScan query 14:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 14:30:27 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 14:30:27 Check angles 14:30:27 SkyScan query 14:30:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 14:30:28 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 14:30:28 Check angles 14:30:28 SkyScan query 14:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 14:30:29 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 14:30:29 Check angles 14:30:29 SkyScan query 14:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.69<-23046 Statuses=0008 0009 14:30:29 Msec=3000 True Az=112.995 Ze=-165.69 Az status=0008 Ze status=0009 14:30:30 Check angles 14:30:30 SkyScan query 14:30:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:30:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:30:30 Message to Master queued w/err=0: serial=277488 error=0 14:30:35 Received message from Master: op=Filter serial=277489 14:30:35 Color wheel filter change from 0 to 0 14:30:35 FLIGetFilterPos err=0 currentPosition=0 14:30:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:35 Filter is already there-color wheel unchanged 14:30:35 Received message from Master: op=Shutter serial=277490 14:30:35 Shutter LASER open 14:30:36 Received message from Camera: op=State serial=277492 14:30:36 GetSingleValue result=40 Value=cccccccc 14:30:36 SkyScan query 14:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:30:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:36 Parameters OK 14:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:36 Set A/D data flow result=40 14:30:36 Set A/D channel type result=40 14:30:36 Set A/D encoding result=40 14:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:36 Set channel filter=0.000000e+000 result=40 14:30:36 Config A/D Result=40 14:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:36 Get A/D filter: -9.255963e+061 result=40 14:30:36 Get A/D value=-858993460 result=40 14:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:36 Parameters OK 14:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:36 Set A/D data flow result=40 14:30:36 Set A/D channel type result=40 14:30:36 Set A/D encoding result=40 14:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:36 Set channel filter=0.000000e+000 result=40 14:30:36 Config A/D Result=40 14:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:36 Get A/D filter: -9.255963e+061 result=40 14:30:36 Get A/D value=-858993460 result=40 14:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:36 Aux= 14:30:36 Message to Camera, serial 277492 queued 14:30:45 Received message from Master: op=Shutter serial=277502 14:30:45 Shutter LASER close 14:30:45 Received message from Master: op=PointingHead serial=277506 14:30:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:30:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:30:45 Point started: ret=0 14:30:45 point_skyscan result=0 14:30:46 Check angles 14:30:46 SkyScan query 14:30:47 SkyScan query done: ret=0 az=89.55<-5970 ze=156.69<-1554 Statuses=0009 0009 14:30:47 Msec=0 True Az=89.55 Ze=156.69 Az status=0009 Ze status=0009 14:30:47 Check angles 14:30:47 SkyScan query 14:30:48 SkyScan query done: ret=0 az=72.03<-4802 ze=135.765<-2949 Statuses=0009 0009 14:30:48 Msec=750 True Az=72.03 Ze=135.765 Az status=0009 Ze status=0009 14:30:48 Check angles 14:30:48 SkyScan query 14:30:48 SkyScan query done: ret=0 az=54.525<-3635 ze=114.765<-4349 Statuses=0009 0009 14:30:48 Msec=1500 True Az=54.525 Ze=114.765 Az status=0009 Ze status=0009 14:30:49 Check angles 14:30:49 SkyScan query 14:30:49 SkyScan query done: ret=0 az=40.98<-2732 ze=93.42<-5772 Statuses=0009 0009 14:30:49 Msec=2250 True Az=40.98 Ze=93.42 Az status=0009 Ze status=0009 14:30:49 Check angles 14:30:49 SkyScan query 14:30:50 SkyScan query done: ret=0 az=40.995<-2733 ze=72.03<-7198 Statuses=0008 0009 14:30:50 Msec=3000 True Az=40.995 Ze=72.03 Az status=0008 Ze status=0009 14:30:50 Check angles 14:30:50 SkyScan query 14:30:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.065<-8529 Statuses=0008 0009 14:30:51 Msec=3750 True Az=40.995 Ze=52.065 Az status=0008 Ze status=0009 14:30:51 Check angles 14:30:51 SkyScan query 14:30:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:30:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:30:51 Message to Master queued w/err=0: serial=277506 error=0 14:30:56 Received message from Master: op=Filter serial=277507 14:30:56 Color wheel filter change from 0 to 0 14:30:56 FLIGetFilterPos err=0 currentPosition=0 14:30:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:56 Filter is already there-color wheel unchanged 14:30:57 Received message from Master: op=Shutter serial=277508 14:30:57 Shutter LASER close 14:30:57 Received message from Camera: op=State serial=277510 14:30:57 GetSingleValue result=40 Value=cccccccc 14:30:57 SkyScan query 14:30:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:30:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:57 Parameters OK 14:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:57 Set A/D data flow result=40 14:30:57 Set A/D channel type result=40 14:30:57 Set A/D encoding result=40 14:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:57 Set channel filter=0.000000e+000 result=40 14:30:57 Config A/D Result=40 14:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:57 Get A/D filter: -9.255963e+061 result=40 14:30:57 Get A/D value=-858993460 result=40 14:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:57 Parameters OK 14:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:57 Set A/D data flow result=40 14:30:57 Set A/D channel type result=40 14:30:57 Set A/D encoding result=40 14:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:57 Set channel filter=0.000000e+000 result=40 14:30:57 Config A/D Result=40 14:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:57 Get A/D filter: -9.255963e+061 result=40 14:30:57 Get A/D value=-858993460 result=40 14:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:57 Aux= 14:30:57 Message to Camera, serial 277510 queued 14:31:34 Received message from Master: op=PointingHead serial=277523 14:31:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:31:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:31:34 Point started: ret=0 14:31:34 point_skyscan result=0 14:31:35 Check angles 14:31:35 SkyScan query 14:31:36 SkyScan query done: ret=0 az=64.17<-4278 ze=66.54<-7564 Statuses=0009 0008 14:31:36 Msec=0 True Az=64.17 Ze=66.54 Az status=0009 Ze status=0008 14:31:36 Check angles 14:31:36 SkyScan query 14:31:37 SkyScan query done: ret=0 az=81.6<-5440 ze=66.51<-7566 Statuses=0009 0008 14:31:37 Msec=750 True Az=81.6 Ze=66.51 Az status=0009 Ze status=0008 14:31:37 Check angles 14:31:37 SkyScan query 14:31:37 SkyScan query done: ret=0 az=99.06<-6604 ze=66.495<-7567 Statuses=0009 0008 14:31:37 Msec=1500 True Az=99.06 Ze=66.495 Az status=0009 Ze status=0008 14:31:37 Check angles 14:31:37 SkyScan query 14:31:38 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 14:31:38 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 14:31:38 Check angles 14:31:38 SkyScan query 14:31:39 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 14:31:39 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 14:31:39 Check angles 14:31:39 SkyScan query 14:31:40 SkyScan query done: ret=0 az=151.83<-10122 ze=66.495<-7567 Statuses=0009 0008 14:31:40 Msec=3750 True Az=151.83 Ze=66.495 Az status=0009 Ze status=0008 14:31:40 Check angles 14:31:40 SkyScan query 14:31:40 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:31:40 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:31:40 Message to Master queued w/err=0: serial=277523 error=0 14:31:45 Received message from Master: op=Filter serial=277524 14:31:45 Color wheel filter change from 0 to 0 14:31:45 FLIGetFilterPos err=0 currentPosition=0 14:31:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:45 Filter is already there-color wheel unchanged 14:31:46 Received message from Master: op=Shutter serial=277525 14:31:46 Shutter LASER close 14:31:46 Received message from Camera: op=State serial=277527 14:31:46 GetSingleValue result=40 Value=cccccccc 14:31:46 SkyScan query 14:31:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:31:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:46 Parameters OK 14:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:46 Set A/D data flow result=40 14:31:46 Set A/D channel type result=40 14:31:46 Set A/D encoding result=40 14:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:46 Set channel filter=0.000000e+000 result=40 14:31:46 Config A/D Result=40 14:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:46 Get A/D filter: -9.255963e+061 result=40 14:31:46 Get A/D value=-858993460 result=40 14:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:46 Parameters OK 14:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:46 Set A/D data flow result=40 14:31:46 Set A/D channel type result=40 14:31:46 Set A/D encoding result=40 14:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:46 Set channel filter=0.000000e+000 result=40 14:31:46 Config A/D Result=40 14:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:46 Get A/D filter: -9.255963e+061 result=40 14:31:46 Get A/D value=-858993460 result=40 14:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:46 Aux= 14:31:46 Message to Camera, serial 277527 queued 14:32:22 Received message from Master: op=PointingHead serial=277539 14:32:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:32:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:32:22 Point started: ret=0 14:32:22 point_skyscan result=0 14:32:23 Check angles 14:32:23 SkyScan query 14:32:24 SkyScan query done: ret=0 az=134.61<-8974 ze=36.36<-9576 Statuses=0009 0009 14:32:24 Msec=0 True Az=134.61 Ze=36.36 Az status=0009 Ze status=0009 14:32:24 Check angles 14:32:24 SkyScan query 14:32:24 SkyScan query done: ret=0 az=116.895<-7793 ze=14.91<-11006 Statuses=0009 0009 14:32:24 Msec=750 True Az=116.895 Ze=14.91 Az status=0009 Ze status=0009 14:32:25 Check angles 14:32:25 SkyScan query 14:32:25 SkyScan query done: ret=0 az=99.495<-6633 ze=-6.105<-12407 Statuses=0009 0009 14:32:25 Msec=1500 True Az=99.495 Ze=-6.105 Az status=0009 Ze status=0009 14:32:25 Check angles 14:32:25 SkyScan query 14:32:26 SkyScan query done: ret=0 az=82.02<-5468 ze=-27.045<-13803 Statuses=0009 0009 14:32:26 Msec=2250 True Az=82.02 Ze=-27.045 Az status=0009 Ze status=0009 14:32:26 Check angles 14:32:26 SkyScan query 14:32:27 SkyScan query done: ret=0 az=64.005<-4267 ze=-38.58<-14572 Statuses=0009 0008 14:32:27 Msec=3000 True Az=64.005 Ze=-38.58 Az status=0009 Ze status=0008 14:32:27 Check angles 14:32:27 SkyScan query 14:32:27 SkyScan query done: ret=0 az=46.665<-3111 ze=-38.52<-14568 Statuses=0009 0008 14:32:27 Msec=3750 True Az=46.665 Ze=-38.52 Az status=0009 Ze status=0008 14:32:28 Check angles 14:32:28 SkyScan query 14:32:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:32:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:32:28 Message to Master queued w/err=0: serial=277539 error=0 14:32:33 Received message from Master: op=Filter serial=277540 14:32:33 Color wheel filter change from 0 to 0 14:32:33 FLIGetFilterPos err=0 currentPosition=0 14:32:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:33 Filter is already there-color wheel unchanged 14:32:33 Received message from Master: op=Shutter serial=277541 14:32:33 Shutter LASER close 14:32:33 Received message from Camera: op=State serial=277543 14:32:33 GetSingleValue result=40 Value=cccccccc 14:32:33 SkyScan query 14:32:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:32:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:34 Parameters OK 14:32:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:34 Set A/D data flow result=40 14:32:34 Set A/D channel type result=40 14:32:34 Set A/D encoding result=40 14:32:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:34 Set channel filter=0.000000e+000 result=40 14:32:34 Config A/D Result=40 14:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:34 Get A/D filter: -9.255963e+061 result=40 14:32:34 Get A/D value=-858993460 result=40 14:32:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:34 Parameters OK 14:32:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:34 Set A/D data flow result=40 14:32:34 Set A/D channel type result=40 14:32:34 Set A/D encoding result=40 14:32:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:34 Set channel filter=0.000000e+000 result=40 14:32:34 Config A/D Result=40 14:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:34 Get A/D filter: -9.255963e+061 result=40 14:32:34 Get A/D value=-858993460 result=40 14:32:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:34 Aux= 14:32:34 Message to Camera, serial 277543 queued 14:33:11 Received message from Master: op=PointingHead serial=277556 14:33:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:33:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:33:11 Point started: ret=0 14:33:11 point_skyscan result=0 14:33:12 Check angles 14:33:12 SkyScan query 14:33:13 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.535<-16569 Statuses=0009 0009 14:33:13 Msec=0 True Az=64.245 Ze=-68.535 Az status=0009 Ze status=0009 14:33:13 Check angles 14:33:13 SkyScan query 14:33:13 SkyScan query done: ret=0 az=82.005<-5467 ze=-89.88<-17992 Statuses=0009 0009 14:33:13 Msec=750 True Az=82.005 Ze=-89.88 Az status=0009 Ze status=0009 14:33:13 Check angles 14:33:13 SkyScan query 14:33:14 SkyScan query done: ret=0 az=99.48<-6632 ze=-110.835<-19389 Statuses=0009 0009 14:33:14 Msec=1500 True Az=99.48 Ze=-110.835 Az status=0009 Ze status=0009 14:33:14 Check angles 14:33:14 SkyScan query 14:33:15 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.775<-20785 Statuses=0009 0009 14:33:15 Msec=2250 True Az=116.895 Ze=-131.775 Az status=0009 Ze status=0009 14:33:15 Check angles 14:33:15 SkyScan query 14:33:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 14:33:16 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 14:33:16 Check angles 14:33:16 SkyScan query 14:33:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:33:16 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:33:16 Message to Master queued w/err=0: serial=277556 error=0 14:33:21 Received message from Master: op=Filter serial=277557 14:33:21 Color wheel filter change from 0 to 0 14:33:21 FLIGetFilterPos err=0 currentPosition=0 14:33:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:21 Filter is already there-color wheel unchanged 14:33:21 Received message from Master: op=Shutter serial=277558 14:33:21 Shutter LASER close 14:33:22 Received message from Camera: op=State serial=277560 14:33:22 GetSingleValue result=40 Value=cccccccc 14:33:22 SkyScan query 14:33:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:33:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:22 Parameters OK 14:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:22 Set A/D data flow result=40 14:33:22 Set A/D channel type result=40 14:33:22 Set A/D encoding result=40 14:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:22 Set channel filter=0.000000e+000 result=40 14:33:22 Config A/D Result=40 14:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:22 Get A/D filter: -9.255963e+061 result=40 14:33:22 Get A/D value=-858993460 result=40 14:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:22 Parameters OK 14:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:22 Set A/D data flow result=40 14:33:22 Set A/D channel type result=40 14:33:22 Set A/D encoding result=40 14:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:22 Set channel filter=0.000000e+000 result=40 14:33:22 Config A/D Result=40 14:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:22 Get A/D filter: -9.255963e+061 result=40 14:33:22 Get A/D value=-858993460 result=40 14:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:22 Aux= 14:33:22 Message to Camera, serial 277560 queued 14:33:59 Received message from Master: op=PointingHead serial=277573 14:33:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:33:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:33:59 Point started: ret=0 14:33:59 point_skyscan result=0 14:34:00 Check angles 14:34:00 SkyScan query 14:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0009 0009 14:34:01 Msec=0 True Az=112.995 Ze=-171.12 Az status=0009 Ze status=0009 14:34:01 Check angles 14:34:01 SkyScan query 14:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:34:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:34:01 Message to Master queued w/err=0: serial=277573 error=0 14:34:06 Received message from Master: op=Filter serial=277574 14:34:06 Color wheel filter change from 0 to 0 14:34:06 FLIGetFilterPos err=0 currentPosition=0 14:34:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:06 Filter is already there-color wheel unchanged 14:34:07 Received message from Master: op=Shutter serial=277575 14:34:07 Shutter LASER open 14:34:07 Received message from Camera: op=State serial=277577 14:34:07 GetSingleValue result=40 Value=cccccccc 14:34:07 SkyScan query 14:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:34:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:07 Parameters OK 14:34:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:07 Set A/D data flow result=40 14:34:07 Set A/D channel type result=40 14:34:07 Set A/D encoding result=40 14:34:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:07 Set channel filter=0.000000e+000 result=40 14:34:07 Config A/D Result=40 14:34:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:07 Get A/D filter: -9.255963e+061 result=40 14:34:07 Get A/D value=-858993460 result=40 14:34:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:07 Parameters OK 14:34:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:07 Set A/D data flow result=40 14:34:07 Set A/D channel type result=40 14:34:07 Set A/D encoding result=40 14:34:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:07 Set channel filter=0.000000e+000 result=40 14:34:07 Config A/D Result=40 14:34:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:07 Get A/D filter: -9.255963e+061 result=40 14:34:07 Get A/D value=-858993460 result=40 14:34:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:07 Aux= 14:34:07 Message to Camera, serial 277577 queued 14:34:16 Received message from Master: op=Shutter serial=277587 14:34:16 Shutter LASER close 14:34:16 Received message from Master: op=PointingHead serial=277591 14:34:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:34:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:34:17 Point started: ret=0 14:34:17 point_skyscan result=0 14:34:17 Check angles 14:34:17 SkyScan query 14:34:18 SkyScan query done: ret=0 az=135.675<-9045 ze=-143.535<-21569 Statuses=0009 0009 14:34:18 Msec=0 True Az=135.675 Ze=-143.535 Az status=0009 Ze status=0009 14:34:18 Check angles 14:34:18 SkyScan query 14:34:19 SkyScan query done: ret=0 az=153.135<-10209 ze=-122.505<-20167 Statuses=0009 0009 14:34:19 Msec=750 True Az=153.135 Ze=-122.505 Az status=0009 Ze status=0009 14:34:19 Check angles 14:34:19 SkyScan query 14:34:20 SkyScan query done: ret=0 az=170.7<-11380 ze=-101.7<-18780 Statuses=0009 0009 14:34:20 Msec=1500 True Az=170.7 Ze=-101.7 Az status=0009 Ze status=0009 14:34:20 Check angles 14:34:20 SkyScan query 14:34:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.67<-17378 Statuses=0008 0009 14:34:20 Msec=2250 True Az=175.995 Ze=-80.67 Az status=0008 Ze status=0009 14:34:20 Check angles 14:34:20 SkyScan query 14:34:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.745<-15983 Statuses=0008 0009 14:34:21 Msec=3000 True Az=175.995 Ze=-59.745 Az status=0008 Ze status=0009 14:34:21 Check angles 14:34:21 SkyScan query 14:34:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:34:22 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:34:22 Message to Master queued w/err=0: serial=277591 error=0 14:34:27 Received message from Master: op=Filter serial=277592 14:34:27 Color wheel filter change from 0 to 0 14:34:27 FLIGetFilterPos err=0 currentPosition=0 14:34:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:27 Filter is already there-color wheel unchanged 14:34:27 Received message from Master: op=Shutter serial=277593 14:34:27 Shutter LASER close 14:34:27 Received message from Camera: op=State serial=277595 14:34:27 GetSingleValue result=40 Value=cccccccc 14:34:27 SkyScan query 14:34:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:34:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:28 Parameters OK 14:34:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:28 Set A/D data flow result=40 14:34:28 Set A/D channel type result=40 14:34:28 Set A/D encoding result=40 14:34:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:28 Set channel filter=0.000000e+000 result=40 14:34:28 Config A/D Result=40 14:34:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:28 Get A/D filter: -9.255963e+061 result=40 14:34:28 Get A/D value=-858993460 result=40 14:34:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:28 Parameters OK 14:34:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:28 Set A/D data flow result=40 14:34:28 Set A/D channel type result=40 14:34:28 Set A/D encoding result=40 14:34:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:28 Set channel filter=0.000000e+000 result=40 14:34:28 Config A/D Result=40 14:34:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:28 Get A/D filter: -9.255963e+061 result=40 14:34:28 Get A/D value=-858993460 result=40 14:34:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:28 Aux= 14:34:28 Message to Camera, serial 277595 queued 14:35:05 Received message from Master: op=PointingHead serial=277608 14:35:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:35:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:35:05 Point started: ret=0 14:35:05 point_skyscan result=0 14:35:06 Check angles 14:35:06 SkyScan query 14:35:06 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.005<-13467 Statuses=0009 0009 14:35:06 Msec=0 True Az=153.225 Ze=-22.005 Az status=0009 Ze status=0009 14:35:06 Check angles 14:35:06 SkyScan query 14:35:07 SkyScan query done: ret=0 az=135.81<-9054 ze=-0.99<-12066 Statuses=0009 0009 14:35:07 Msec=750 True Az=135.81 Ze=-0.99 Az status=0009 Ze status=0009 14:35:07 Check angles 14:35:07 SkyScan query 14:35:08 SkyScan query done: ret=0 az=118.23<-7882 ze=19.92<-10672 Statuses=0009 0009 14:35:08 Msec=1500 True Az=118.23 Ze=19.92 Az status=0009 Ze status=0009 14:35:08 Check angles 14:35:08 SkyScan query 14:35:08 SkyScan query done: ret=0 az=100.83<-6722 ze=40.905<-9273 Statuses=0009 0009 14:35:08 Msec=2250 True Az=100.83 Ze=40.905 Az status=0009 Ze status=0009 14:35:09 Check angles 14:35:09 SkyScan query 14:35:09 SkyScan query done: ret=0 az=85.965<-5731 ze=51.54<-8564 Statuses=0009 0008 14:35:09 Msec=3000 True Az=85.965 Ze=51.54 Az status=0009 Ze status=0008 14:35:09 Check angles 14:35:09 SkyScan query 14:35:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 14:35:10 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 14:35:10 Message to Master queued w/err=0: serial=277608 error=0 14:35:15 Received message from Master: op=Filter serial=277609 14:35:15 Color wheel filter change from 0 to 0 14:35:15 FLIGetFilterPos err=0 currentPosition=0 14:35:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:15 Filter is already there-color wheel unchanged 14:35:15 Received message from Master: op=Shutter serial=277610 14:35:15 Shutter LASER close 14:35:15 Received message from Camera: op=State serial=277612 14:35:15 GetSingleValue result=40 Value=cccccccc 14:35:15 SkyScan query 14:35:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:35:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:16 Parameters OK 14:35:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:16 Set A/D data flow result=40 14:35:16 Set A/D channel type result=40 14:35:16 Set A/D encoding result=40 14:35:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:16 Set channel filter=0.000000e+000 result=40 14:35:16 Config A/D Result=40 14:35:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:16 Get A/D filter: -9.255963e+061 result=40 14:35:16 Get A/D value=-858993460 result=40 14:35:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:16 Parameters OK 14:35:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:16 Set A/D data flow result=40 14:35:16 Set A/D channel type result=40 14:35:16 Set A/D encoding result=40 14:35:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:16 Set channel filter=0.000000e+000 result=40 14:35:16 Config A/D Result=40 14:35:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:16 Get A/D filter: -9.255963e+061 result=40 14:35:16 Get A/D value=-858993460 result=40 14:35:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:16 Aux= 14:35:16 Message to Camera, serial 277612 queued [UTC 2018-12-19 14:35:52] 14:35:53 Received message from Master: op=PointingHead serial=277625 14:35:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:35:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:35:53 Point started: ret=0 14:35:53 point_skyscan result=0 14:35:54 Check angles 14:35:54 SkyScan query 14:35:54 SkyScan query done: ret=0 az=109.005<-7267 ze=38.49<-9434 Statuses=0009 0008 14:35:54 Msec=0 True Az=109.005 Ze=38.49 Az status=0009 Ze status=0008 14:35:55 Check angles 14:35:55 SkyScan query 14:35:55 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 14:35:55 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 14:35:55 Check angles 14:35:55 SkyScan query 14:35:56 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 14:35:56 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 14:35:56 Check angles 14:35:56 SkyScan query 14:35:57 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 14:35:57 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 14:35:57 Check angles 14:35:57 SkyScan query 14:35:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:35:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:35:58 Check angles 14:35:58 SkyScan query 14:35:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:35:58 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:35:58 Message to Master queued w/err=0: serial=277625 error=0 14:36:03 Received message from Master: op=Filter serial=277626 14:36:03 Color wheel filter change from 0 to 0 14:36:03 FLIGetFilterPos err=0 currentPosition=0 14:36:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:03 Filter is already there-color wheel unchanged 14:36:03 Received message from Master: op=Shutter serial=277627 14:36:03 Shutter LASER close 14:36:03 Received message from Camera: op=State serial=277629 14:36:03 GetSingleValue result=40 Value=cccccccc 14:36:03 SkyScan query 14:36:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:36:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:04 Parameters OK 14:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:04 Set A/D data flow result=40 14:36:04 Set A/D channel type result=40 14:36:04 Set A/D encoding result=40 14:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:04 Set channel filter=0.000000e+000 result=40 14:36:04 Config A/D Result=40 14:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:04 Get A/D filter: -9.255963e+061 result=40 14:36:04 Get A/D value=-858993460 result=40 14:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:04 Parameters OK 14:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:04 Set A/D data flow result=40 14:36:04 Set A/D channel type result=40 14:36:04 Set A/D encoding result=40 14:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:04 Set channel filter=0.000000e+000 result=40 14:36:04 Config A/D Result=40 14:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:04 Get A/D filter: -9.255963e+061 result=40 14:36:04 Get A/D value=-858993460 result=40 14:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:04 Aux= 14:36:04 Message to Camera, serial 277629 queued 14:36:41 Received message from Master: op=PointingHead serial=277642 14:36:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:36:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:36:41 Point started: ret=0 14:36:41 point_skyscan result=0 14:36:42 Check angles 14:36:42 SkyScan query 14:36:42 SkyScan query done: ret=0 az=152.88<-10192 ze=8.67<-11422 Statuses=0009 0009 14:36:42 Msec=0 True Az=152.88 Ze=8.67 Az status=0009 Ze status=0009 14:36:43 Check angles 14:36:43 SkyScan query 14:36:43 SkyScan query done: ret=0 az=134.985<-8999 ze=-12.735<-12849 Statuses=0009 0009 14:36:43 Msec=750 True Az=134.985 Ze=-12.735 Az status=0009 Ze status=0009 14:36:43 Check angles 14:36:43 SkyScan query 14:36:44 SkyScan query done: ret=0 az=117.15<-7810 ze=-34.2<-14280 Statuses=0009 0009 14:36:44 Msec=1500 True Az=117.15 Ze=-34.2 Az status=0009 Ze status=0009 14:36:44 Check angles 14:36:44 SkyScan query 14:36:45 SkyScan query done: ret=0 az=99.735<-6649 ze=-51.57<-15438 Statuses=0009 0009 14:36:45 Msec=2250 True Az=99.735 Ze=-51.57 Az status=0009 Ze status=0009 14:36:45 Check angles 14:36:45 SkyScan query 14:36:45 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 14:36:45 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 14:36:46 Check angles 14:36:46 SkyScan query 14:36:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:36:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:36:46 Message to Master queued w/err=0: serial=277642 error=0 14:36:51 Received message from Master: op=Filter serial=277643 14:36:51 Color wheel filter change from 0 to 0 14:36:51 FLIGetFilterPos err=0 currentPosition=0 14:36:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:51 Filter is already there-color wheel unchanged 14:36:51 Received message from Master: op=Shutter serial=277644 14:36:51 Shutter LASER close 14:36:51 Received message from Camera: op=State serial=277646 14:36:51 GetSingleValue result=40 Value=cccccccc 14:36:51 SkyScan query 14:36:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:36:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:52 Parameters OK 14:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:52 Set A/D data flow result=40 14:36:52 Set A/D channel type result=40 14:36:52 Set A/D encoding result=40 14:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:52 Set channel filter=0.000000e+000 result=40 14:36:52 Config A/D Result=40 14:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:52 Get A/D filter: -9.255963e+061 result=40 14:36:52 Get A/D value=-858993460 result=40 14:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:52 Parameters OK 14:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:52 Set A/D data flow result=40 14:36:52 Set A/D channel type result=40 14:36:52 Set A/D encoding result=40 14:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:52 Set channel filter=0.000000e+000 result=40 14:36:52 Config A/D Result=40 14:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:52 Get A/D filter: -9.255963e+061 result=40 14:36:52 Get A/D value=-858993460 result=40 14:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:52 Aux= 14:36:52 Message to Camera, serial 277646 queued 14:37:29 Received message from Master: op=PointingHead serial=277659 14:37:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:37:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:37:29 Point started: ret=0 14:37:29 point_skyscan result=0 14:37:30 Check angles 14:37:30 SkyScan query 14:37:31 SkyScan query done: ret=0 az=109.44<-7296 ze=-81.555<-17437 Statuses=0009 0009 14:37:31 Msec=0 True Az=109.44 Ze=-81.555 Az status=0009 Ze status=0009 14:37:31 Check angles 14:37:31 SkyScan query 14:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 14:37:31 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 14:37:31 Check angles 14:37:31 SkyScan query 14:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 14:37:32 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 14:37:32 Check angles 14:37:32 SkyScan query 14:37:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 14:37:33 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 14:37:33 Check angles 14:37:33 SkyScan query 14:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 14:37:34 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 14:37:34 Check angles 14:37:34 SkyScan query 14:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:37:34 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:37:34 Message to Master queued w/err=0: serial=277659 error=0 14:37:39 Received message from Master: op=Filter serial=277660 14:37:39 Color wheel filter change from 0 to 0 14:37:39 FLIGetFilterPos err=0 currentPosition=0 14:37:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:39 Filter is already there-color wheel unchanged 14:37:39 Received message from Master: op=Shutter serial=277661 14:37:39 Shutter LASER open 14:37:40 Received message from Camera: op=State serial=277663 14:37:40 GetSingleValue result=40 Value=cccccccc 14:37:40 SkyScan query 14:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:37:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:40 Parameters OK 14:37:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:40 Set A/D data flow result=40 14:37:40 Set A/D channel type result=40 14:37:40 Set A/D encoding result=40 14:37:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:40 Set channel filter=0.000000e+000 result=40 14:37:40 Config A/D Result=40 14:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:40 Get A/D filter: -9.255963e+061 result=40 14:37:40 Get A/D value=-858993460 result=40 14:37:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:40 Parameters OK 14:37:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:40 Set A/D data flow result=40 14:37:40 Set A/D channel type result=40 14:37:40 Set A/D encoding result=40 14:37:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:40 Set channel filter=0.000000e+000 result=40 14:37:40 Config A/D Result=40 14:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:40 Get A/D filter: -9.255963e+061 result=40 14:37:40 Get A/D value=-858993460 result=40 14:37:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:40 Aux= 14:37:40 Message to Camera, serial 277663 queued 14:37:49 Received message from Master: op=Shutter serial=277673 14:37:49 Shutter LASER close 14:37:49 Received message from Master: op=PointingHead serial=277677 14:37:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:37:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:37:49 Point started: ret=0 14:37:49 point_skyscan result=0 14:37:50 Check angles 14:37:50 SkyScan query 14:37:51 SkyScan query done: ret=0 az=89.55<-5970 ze=156.75<-1550 Statuses=0009 0009 14:37:51 Msec=0 True Az=89.55 Ze=156.75 Az status=0009 Ze status=0009 14:37:51 Check angles 14:37:51 SkyScan query 14:37:52 SkyScan query done: ret=0 az=71.625<-4775 ze=135.39<-2974 Statuses=0009 0009 14:37:52 Msec=750 True Az=71.625 Ze=135.39 Az status=0009 Ze status=0009 14:37:52 Check angles 14:37:52 SkyScan query 14:37:52 SkyScan query done: ret=0 az=54.255<-3617 ze=114.39<-4374 Statuses=0009 0009 14:37:52 Msec=1500 True Az=54.255 Ze=114.39 Az status=0009 Ze status=0009 14:37:52 Check angles 14:37:52 SkyScan query 14:37:53 SkyScan query done: ret=0 az=40.98<-2732 ze=93.48<-5768 Statuses=0009 0009 14:37:53 Msec=2250 True Az=40.98 Ze=93.48 Az status=0009 Ze status=0009 14:37:53 Check angles 14:37:53 SkyScan query 14:37:54 SkyScan query done: ret=0 az=40.995<-2733 ze=72.48<-7168 Statuses=0008 0009 14:37:54 Msec=3000 True Az=40.995 Ze=72.48 Az status=0008 Ze status=0009 14:37:54 Check angles 14:37:54 SkyScan query 14:37:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 14:37:55 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 14:37:55 Check angles 14:37:55 SkyScan query 14:37:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:37:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:37:55 Message to Master queued w/err=0: serial=277677 error=0 14:38:00 Received message from Master: op=Filter serial=277678 14:38:00 Color wheel filter change from 0 to 0 14:38:00 FLIGetFilterPos err=0 currentPosition=0 14:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:00 Filter is already there-color wheel unchanged 14:38:00 Received message from Master: op=Shutter serial=277679 14:38:00 Shutter LASER close 14:38:01 Received message from Camera: op=State serial=277681 14:38:01 GetSingleValue result=40 Value=cccccccc 14:38:01 SkyScan query 14:38:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:01 Parameters OK 14:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:01 Set A/D data flow result=40 14:38:01 Set A/D channel type result=40 14:38:01 Set A/D encoding result=40 14:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:01 Set channel filter=0.000000e+000 result=40 14:38:01 Config A/D Result=40 14:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:01 Get A/D filter: -9.255963e+061 result=40 14:38:01 Get A/D value=-858993460 result=40 14:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:01 Parameters OK 14:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:01 Set A/D data flow result=40 14:38:01 Set A/D channel type result=40 14:38:01 Set A/D encoding result=40 14:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:01 Set channel filter=0.000000e+000 result=40 14:38:01 Config A/D Result=40 14:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:01 Get A/D filter: -9.255963e+061 result=40 14:38:01 Get A/D value=-858993460 result=40 14:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:01 Aux= 14:38:01 Message to Camera, serial 277681 queued 14:38:38 Received message from Master: op=PointingHead serial=277694 14:38:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:38:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:38:38 Point started: ret=0 14:38:38 point_skyscan result=0 14:38:39 Check angles 14:38:39 SkyScan query 14:38:40 SkyScan query done: ret=0 az=64.035<-4269 ze=66.54<-7564 Statuses=0009 0008 14:38:40 Msec=0 True Az=64.035 Ze=66.54 Az status=0009 Ze status=0008 14:38:40 Check angles 14:38:40 SkyScan query 14:38:40 SkyScan query done: ret=0 az=81.855<-5457 ze=66.51<-7566 Statuses=0009 0008 14:38:40 Msec=750 True Az=81.855 Ze=66.51 Az status=0009 Ze status=0008 14:38:41 Check angles 14:38:41 SkyScan query 14:38:41 SkyScan query done: ret=0 az=99.33<-6622 ze=66.495<-7567 Statuses=0009 0008 14:38:41 Msec=1500 True Az=99.33 Ze=66.495 Az status=0009 Ze status=0008 14:38:41 Check angles 14:38:41 SkyScan query 14:38:42 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 14:38:42 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 14:38:42 Check angles 14:38:42 SkyScan query 14:38:43 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 14:38:43 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 14:38:43 Check angles 14:38:43 SkyScan query 14:38:44 SkyScan query done: ret=0 az=152.04<-10136 ze=66.495<-7567 Statuses=0009 0008 14:38:44 Msec=3750 True Az=152.04 Ze=66.495 Az status=0009 Ze status=0008 14:38:44 Check angles 14:38:44 SkyScan query 14:38:44 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:38:44 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:38:44 Message to Master queued w/err=0: serial=277694 error=0 14:38:49 Received message from Master: op=Filter serial=277695 14:38:49 Color wheel filter change from 0 to 0 14:38:49 FLIGetFilterPos err=0 currentPosition=0 14:38:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:49 Filter is already there-color wheel unchanged 14:38:49 Received message from Master: op=Shutter serial=277696 14:38:49 Shutter LASER close 14:38:49 Received message from Camera: op=State serial=277698 14:38:49 GetSingleValue result=40 Value=cccccccc 14:38:49 SkyScan query 14:38:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:38:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:50 Parameters OK 14:38:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:50 Set A/D data flow result=40 14:38:50 Set A/D channel type result=40 14:38:50 Set A/D encoding result=40 14:38:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:50 Set channel filter=0.000000e+000 result=40 14:38:50 Config A/D Result=40 14:38:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:50 Get A/D filter: -9.255963e+061 result=40 14:38:50 Get A/D value=-858993460 result=40 14:38:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:50 Parameters OK 14:38:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:50 Set A/D data flow result=40 14:38:50 Set A/D channel type result=40 14:38:50 Set A/D encoding result=40 14:38:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:50 Set channel filter=0.000000e+000 result=40 14:38:50 Config A/D Result=40 14:38:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:50 Get A/D filter: -9.255963e+061 result=40 14:38:50 Get A/D value=-858993460 result=40 14:38:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:50 Aux= 14:38:50 Message to Camera, serial 277698 queued 14:39:27 Received message from Master: op=PointingHead serial=277711 14:39:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:39:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:39:27 Point started: ret=0 14:39:27 point_skyscan result=0 14:39:28 Check angles 14:39:28 SkyScan query 14:39:29 SkyScan query done: ret=0 az=134.985<-8999 ze=36.705<-9553 Statuses=0009 0009 14:39:29 Msec=0 True Az=134.985 Ze=36.705 Az status=0009 Ze status=0009 14:39:29 Check angles 14:39:29 SkyScan query 14:39:29 SkyScan query done: ret=0 az=117.495<-7833 ze=15.735<-10951 Statuses=0009 0009 14:39:29 Msec=750 True Az=117.495 Ze=15.735 Az status=0009 Ze status=0009 14:39:29 Check angles 14:39:29 SkyScan query 14:39:30 SkyScan query done: ret=0 az=100.125<-6675 ze=-5.205<-12347 Statuses=0009 0009 14:39:30 Msec=1500 True Az=100.125 Ze=-5.205 Az status=0009 Ze status=0009 14:39:30 Check angles 14:39:30 SkyScan query 14:39:31 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.175<-13745 Statuses=0009 0009 14:39:31 Msec=2250 True Az=82.485 Ze=-26.175 Az status=0009 Ze status=0009 14:39:31 Check angles 14:39:31 SkyScan query 14:39:32 SkyScan query done: ret=0 az=65.085<-4339 ze=-38.58<-14572 Statuses=0009 0008 14:39:32 Msec=3000 True Az=65.085 Ze=-38.58 Az status=0009 Ze status=0008 14:39:32 Check angles 14:39:32 SkyScan query 14:39:32 SkyScan query done: ret=0 az=47.625<-3175 ze=-38.52<-14568 Statuses=0009 0008 14:39:32 Msec=3750 True Az=47.625 Ze=-38.52 Az status=0009 Ze status=0008 14:39:32 Check angles 14:39:32 SkyScan query 14:39:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:39:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:39:33 Message to Master queued w/err=0: serial=277711 error=0 14:39:38 Received message from Master: op=Filter serial=277712 14:39:38 Color wheel filter change from 0 to 0 14:39:38 FLIGetFilterPos err=0 currentPosition=0 14:39:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:38 Filter is already there-color wheel unchanged 14:39:38 Received message from Master: op=Shutter serial=277713 14:39:38 Shutter LASER close 14:39:38 Received message from Camera: op=State serial=277715 14:39:38 GetSingleValue result=40 Value=cccccccc 14:39:38 SkyScan query 14:39:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:39:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:39 Parameters OK 14:39:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:39 Set A/D data flow result=40 14:39:39 Set A/D channel type result=40 14:39:39 Set A/D encoding result=40 14:39:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:39 Set channel filter=0.000000e+000 result=40 14:39:39 Config A/D Result=40 14:39:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:39 Get A/D filter: -9.255963e+061 result=40 14:39:39 Get A/D value=-858993460 result=40 14:39:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:39 Parameters OK 14:39:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:39 Set A/D data flow result=40 14:39:39 Set A/D channel type result=40 14:39:39 Set A/D encoding result=40 14:39:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:39 Set channel filter=0.000000e+000 result=40 14:39:39 Config A/D Result=40 14:39:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:39 Get A/D filter: -9.255963e+061 result=40 14:39:39 Get A/D value=-858993460 result=40 14:39:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:39 Aux= 14:39:39 Message to Camera, serial 277715 queued 14:40:16 Received message from Master: op=PointingHead serial=277728 14:40:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:40:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:40:16 Point started: ret=0 14:40:16 point_skyscan result=0 14:40:17 Check angles 14:40:17 SkyScan query 14:40:17 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.115<-16541 Statuses=0009 0009 14:40:17 Msec=0 True Az=64.08 Ze=-68.115 Az status=0009 Ze status=0009 14:40:18 Check angles 14:40:18 SkyScan query 14:40:18 SkyScan query done: ret=0 az=81.435<-5429 ze=-89.115<-17941 Statuses=0009 0009 14:40:18 Msec=750 True Az=81.435 Ze=-89.115 Az status=0009 Ze status=0009 14:40:18 Check angles 14:40:18 SkyScan query 14:40:19 SkyScan query done: ret=0 az=98.94<-6596 ze=-109.995<-19333 Statuses=0009 0009 14:40:19 Msec=1500 True Az=98.94 Ze=-109.995 Az status=0009 Ze status=0009 14:40:19 Check angles 14:40:19 SkyScan query 14:40:20 SkyScan query done: ret=0 az=116.385<-7759 ze=-130.98<-20732 Statuses=0009 0009 14:40:20 Msec=2250 True Az=116.385 Ze=-130.98 Az status=0009 Ze status=0009 14:40:20 Check angles 14:40:20 SkyScan query 14:40:20 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 14:40:20 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 14:40:21 Check angles 14:40:21 SkyScan query 14:40:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:40:21 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:40:21 Message to Master queued w/err=0: serial=277728 error=0 14:40:26 Received message from Master: op=Filter serial=277729 14:40:26 Color wheel filter change from 0 to 0 14:40:26 FLIGetFilterPos err=0 currentPosition=0 14:40:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:26 Filter is already there-color wheel unchanged 14:40:26 Received message from Master: op=Shutter serial=277730 14:40:26 Shutter LASER close 14:40:26 Received message from Camera: op=State serial=277732 14:40:26 GetSingleValue result=40 Value=cccccccc 14:40:26 SkyScan query 14:40:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:40:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:27 Parameters OK 14:40:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:27 Set A/D data flow result=40 14:40:27 Set A/D channel type result=40 14:40:27 Set A/D encoding result=40 14:40:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:27 Set channel filter=0.000000e+000 result=40 14:40:27 Config A/D Result=40 14:40:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:27 Get A/D filter: -9.255963e+061 result=40 14:40:27 Get A/D value=-858993460 result=40 14:40:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:27 Parameters OK 14:40:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:27 Set A/D data flow result=40 14:40:27 Set A/D channel type result=40 14:40:27 Set A/D encoding result=40 14:40:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:27 Set channel filter=0.000000e+000 result=40 14:40:27 Config A/D Result=40 14:40:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:27 Get A/D filter: -9.255963e+061 result=40 14:40:27 Get A/D value=-858993460 result=40 14:40:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:27 Aux= 14:40:27 Message to Camera, serial 277732 queued 14:41:03 Received message from Master: op=PointingHead serial=277744 14:41:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:41:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:41:03 Point started: ret=0 14:41:03 point_skyscan result=0 14:41:04 Check angles 14:41:04 SkyScan query 14:41:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 14:41:04 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 14:41:05 Check angles 14:41:05 SkyScan query 14:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:41:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:41:05 Message to Master queued w/err=0: serial=277744 error=0 14:41:10 Received message from Master: op=Filter serial=277745 14:41:10 Color wheel filter change from 0 to 0 14:41:10 FLIGetFilterPos err=0 currentPosition=0 14:41:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:10 Filter is already there-color wheel unchanged 14:41:10 Received message from Master: op=Shutter serial=277746 14:41:10 Shutter LASER open 14:41:11 Received message from Camera: op=State serial=277748 14:41:11 GetSingleValue result=40 Value=cccccccc 14:41:11 SkyScan query 14:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:41:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:11 Parameters OK 14:41:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:11 Set A/D data flow result=40 14:41:11 Set A/D channel type result=40 14:41:11 Set A/D encoding result=40 14:41:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:11 Set channel filter=0.000000e+000 result=40 14:41:11 Config A/D Result=40 14:41:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:11 Get A/D filter: -9.255963e+061 result=40 14:41:11 Get A/D value=-858993460 result=40 14:41:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:11 Parameters OK 14:41:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:11 Set A/D data flow result=40 14:41:11 Set A/D channel type result=40 14:41:11 Set A/D encoding result=40 14:41:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:11 Set channel filter=0.000000e+000 result=40 14:41:11 Config A/D Result=40 14:41:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:11 Get A/D filter: -9.255963e+061 result=40 14:41:11 Get A/D value=-858993460 result=40 14:41:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:11 Aux= 14:41:11 Message to Camera, serial 277748 queued 14:41:20 Received message from Master: op=Shutter serial=277758 14:41:20 Shutter LASER close 14:41:20 Received message from Master: op=PointingHead serial=277762 14:41:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:41:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:41:21 Point started: ret=0 14:41:21 point_skyscan result=0 14:41:21 Check angles 14:41:21 SkyScan query 14:41:22 SkyScan query done: ret=0 az=136.32<-9088 ze=-142.83<-21522 Statuses=0009 0009 14:41:22 Msec=0 True Az=136.32 Ze=-142.83 Az status=0009 Ze status=0009 14:41:22 Check angles 14:41:22 SkyScan query 14:41:23 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.875<-20125 Statuses=0009 0009 14:41:23 Msec=750 True Az=153.78 Ze=-121.875 Az status=0009 Ze status=0009 14:41:23 Check angles 14:41:23 SkyScan query 14:41:23 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.86<-18724 Statuses=0009 0009 14:41:23 Msec=1500 True Az=171.36 Ze=-100.86 Az status=0009 Ze status=0009 14:41:24 Check angles 14:41:24 SkyScan query 14:41:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.965<-17331 Statuses=0008 0009 14:41:24 Msec=2250 True Az=176.01 Ze=-79.965 Az status=0008 Ze status=0009 14:41:24 Check angles 14:41:24 SkyScan query 14:41:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.98<-15932 Statuses=0008 0009 14:41:25 Msec=3000 True Az=175.995 Ze=-58.98 Az status=0008 Ze status=0009 14:41:25 Check angles 14:41:25 SkyScan query 14:41:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 14:41:26 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 14:41:26 Message to Master queued w/err=0: serial=277762 error=0 14:41:31 Received message from Master: op=Filter serial=277763 14:41:31 Color wheel filter change from 0 to 0 14:41:31 FLIGetFilterPos err=0 currentPosition=0 14:41:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:31 Filter is already there-color wheel unchanged 14:41:31 Received message from Master: op=Shutter serial=277764 14:41:31 Shutter LASER close 14:41:31 Received message from Camera: op=State serial=277766 14:41:31 GetSingleValue result=40 Value=cccccccc 14:41:31 SkyScan query 14:41:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:41:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:32 Parameters OK 14:41:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:32 Set A/D data flow result=40 14:41:32 Set A/D channel type result=40 14:41:32 Set A/D encoding result=40 14:41:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:32 Set channel filter=0.000000e+000 result=40 14:41:32 Config A/D Result=40 14:41:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:32 Get A/D filter: -9.255963e+061 result=40 14:41:32 Get A/D value=-858993460 result=40 14:41:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:32 Parameters OK 14:41:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:32 Set A/D data flow result=40 14:41:32 Set A/D channel type result=40 14:41:32 Set A/D encoding result=40 14:41:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:32 Set channel filter=0.000000e+000 result=40 14:41:32 Config A/D Result=40 14:41:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:32 Get A/D filter: -9.255963e+061 result=40 14:41:32 Get A/D value=-858993460 result=40 14:41:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:32 Aux= 14:41:32 Message to Camera, serial 277766 queued 14:42:08 Received message from Master: op=PointingHead serial=277779 14:42:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:42:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:42:09 Point started: ret=0 14:42:09 point_skyscan result=0 14:42:09 Check angles 14:42:09 SkyScan query 14:42:10 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.645<-13443 Statuses=0009 0009 14:42:10 Msec=0 True Az=152.925 Ze=-21.645 Az status=0009 Ze status=0009 14:42:10 Check angles 14:42:10 SkyScan query 14:42:11 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.675<-12045 Statuses=0009 0009 14:42:11 Msec=750 True Az=135.435 Ze=-0.675 Az status=0009 Ze status=0009 14:42:11 Check angles 14:42:11 SkyScan query 14:42:12 SkyScan query done: ret=0 az=117.9<-7860 ze=20.25<-10650 Statuses=0009 0009 14:42:12 Msec=1500 True Az=117.9 Ze=20.25 Az status=0009 Ze status=0009 14:42:12 Check angles 14:42:12 SkyScan query 14:42:12 SkyScan query done: ret=0 az=100.545<-6703 ze=41.25<-9250 Statuses=0009 0009 14:42:12 Msec=2250 True Az=100.545 Ze=41.25 Az status=0009 Ze status=0009 14:42:12 Check angles 14:42:12 SkyScan query 14:42:13 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 14:42:13 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 14:42:13 Check angles 14:42:13 SkyScan query 14:42:14 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 14:42:14 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 14:42:14 Message to Master queued w/err=0: serial=277779 error=0 14:42:19 Received message from Master: op=Filter serial=277780 14:42:19 Color wheel filter change from 0 to 0 14:42:19 FLIGetFilterPos err=0 currentPosition=0 14:42:19 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:19 Filter is already there-color wheel unchanged 14:42:19 Received message from Master: op=Shutter serial=277781 14:42:19 Shutter LASER close 14:42:19 Received message from Camera: op=State serial=277783 14:42:19 GetSingleValue result=40 Value=cccccccc 14:42:19 SkyScan query 14:42:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:42:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:20 Parameters OK 14:42:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:20 Set A/D data flow result=40 14:42:20 Set A/D channel type result=40 14:42:20 Set A/D encoding result=40 14:42:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:20 Set channel filter=0.000000e+000 result=40 14:42:20 Config A/D Result=40 14:42:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:20 Get A/D filter: -9.255963e+061 result=40 14:42:20 Get A/D value=-858993460 result=40 14:42:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:20 Parameters OK 14:42:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:20 Set A/D data flow result=40 14:42:20 Set A/D channel type result=40 14:42:20 Set A/D encoding result=40 14:42:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:20 Set channel filter=0.000000e+000 result=40 14:42:20 Config A/D Result=40 14:42:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:20 Get A/D filter: -9.255963e+061 result=40 14:42:20 Get A/D value=-858993460 result=40 14:42:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:20 Aux= 14:42:20 Message to Camera, serial 277783 queued 14:42:56 Received message from Master: op=PointingHead serial=277796 14:42:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:42:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:42:57 Point started: ret=0 14:42:57 point_skyscan result=0 14:42:58 Check angles 14:42:58 SkyScan query 14:42:58 SkyScan query done: ret=0 az=108.9<-7260 ze=38.49<-9434 Statuses=0009 0008 14:42:58 Msec=0 True Az=108.9 Ze=38.49 Az status=0009 Ze status=0008 14:42:58 Check angles 14:42:58 SkyScan query 14:42:59 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 14:42:59 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 14:42:59 Check angles 14:42:59 SkyScan query 14:43:00 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 14:43:00 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 14:43:00 Check angles 14:43:00 SkyScan query 14:43:00 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 14:43:00 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 14:43:01 Check angles 14:43:01 SkyScan query 14:43:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:43:01 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:43:01 Check angles 14:43:01 SkyScan query 14:43:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:43:02 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:43:02 Message to Master queued w/err=0: serial=277796 error=0 14:43:07 Received message from Master: op=Filter serial=277797 14:43:07 Color wheel filter change from 0 to 0 14:43:07 FLIGetFilterPos err=0 currentPosition=0 14:43:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:07 Filter is already there-color wheel unchanged 14:43:07 Received message from Master: op=Shutter serial=277798 14:43:07 Shutter LASER close 14:43:07 Received message from Camera: op=State serial=277800 14:43:07 GetSingleValue result=40 Value=cccccccc 14:43:07 SkyScan query 14:43:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:43:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:08 Parameters OK 14:43:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:08 Set A/D data flow result=40 14:43:08 Set A/D channel type result=40 14:43:08 Set A/D encoding result=40 14:43:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:08 Set channel filter=0.000000e+000 result=40 14:43:08 Config A/D Result=40 14:43:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:08 Get A/D filter: -9.255963e+061 result=40 14:43:08 Get A/D value=-858993460 result=40 14:43:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:08 Parameters OK 14:43:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:08 Set A/D data flow result=40 14:43:08 Set A/D channel type result=40 14:43:08 Set A/D encoding result=40 14:43:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:08 Set channel filter=0.000000e+000 result=40 14:43:08 Config A/D Result=40 14:43:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:08 Get A/D filter: -9.255963e+061 result=40 14:43:08 Get A/D value=-858993460 result=40 14:43:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:08 Aux= 14:43:08 Message to Camera, serial 277800 queued 14:43:44 Received message from Master: op=PointingHead serial=277813 14:43:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:43:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:43:45 Point started: ret=0 14:43:45 point_skyscan result=0 14:43:46 Check angles 14:43:46 SkyScan query 14:43:46 SkyScan query done: ret=0 az=152.73<-10182 ze=8.265<-11449 Statuses=0009 0009 14:43:46 Msec=0 True Az=152.73 Ze=8.265 Az status=0009 Ze status=0009 14:43:46 Check angles 14:43:46 SkyScan query 14:43:47 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.555<-12837 Statuses=0009 0009 14:43:47 Msec=750 True Az=135.285 Ze=-12.555 Az status=0009 Ze status=0009 14:43:47 Check angles 14:43:47 SkyScan query 14:43:48 SkyScan query done: ret=0 az=117.42<-7828 ze=-34.02<-14268 Statuses=0009 0009 14:43:48 Msec=1500 True Az=117.42 Ze=-34.02 Az status=0009 Ze status=0009 14:43:48 Check angles 14:43:48 SkyScan query 14:43:48 SkyScan query done: ret=0 az=99.945<-6663 ze=-51.57<-15438 Statuses=0009 0009 14:43:48 Msec=2250 True Az=99.945 Ze=-51.57 Az status=0009 Ze status=0009 14:43:49 Check angles 14:43:49 SkyScan query 14:43:49 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 14:43:49 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 14:43:49 Check angles 14:43:49 SkyScan query 14:43:50 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 14:43:50 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 14:43:50 Message to Master queued w/err=0: serial=277813 error=0 14:43:55 Received message from Master: op=Filter serial=277814 14:43:55 Color wheel filter change from 0 to 0 14:43:55 FLIGetFilterPos err=0 currentPosition=0 14:43:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:55 Filter is already there-color wheel unchanged 14:43:55 Received message from Master: op=Shutter serial=277815 14:43:55 Shutter LASER close 14:43:55 Received message from Camera: op=State serial=277817 14:43:55 GetSingleValue result=40 Value=cccccccc 14:43:55 SkyScan query 14:43:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:43:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:56 Parameters OK 14:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:56 Set A/D data flow result=40 14:43:56 Set A/D channel type result=40 14:43:56 Set A/D encoding result=40 14:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:56 Set channel filter=0.000000e+000 result=40 14:43:56 Config A/D Result=40 14:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:56 Get A/D filter: -9.255963e+061 result=40 14:43:56 Get A/D value=-858993460 result=40 14:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:56 Parameters OK 14:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:56 Set A/D data flow result=40 14:43:56 Set A/D channel type result=40 14:43:56 Set A/D encoding result=40 14:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:56 Set channel filter=0.000000e+000 result=40 14:43:56 Config A/D Result=40 14:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:56 Get A/D filter: -9.255963e+061 result=40 14:43:56 Get A/D value=-858993460 result=40 14:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:56 Aux= 14:43:56 Message to Camera, serial 277817 queued 14:44:33 Received message from Master: op=PointingHead serial=277830 14:44:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:44:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:44:33 Point started: ret=0 14:44:33 point_skyscan result=0 14:44:34 Check angles 14:44:34 SkyScan query 14:44:34 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.525<-17435 Statuses=0009 0009 14:44:34 Msec=0 True Az=109.185 Ze=-81.525 Az status=0009 Ze status=0009 14:44:34 Check angles 14:44:34 SkyScan query 14:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 14:44:35 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 14:44:35 Check angles 14:44:35 SkyScan query 14:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 14:44:36 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 14:44:36 Check angles 14:44:36 SkyScan query 14:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 14:44:37 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 14:44:37 Check angles 14:44:37 SkyScan query 14:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 14:44:37 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 14:44:37 Check angles 14:44:37 SkyScan query 14:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:44:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:44:38 Message to Master queued w/err=0: serial=277830 error=0 14:44:43 Received message from Master: op=Filter serial=277831 14:44:43 Color wheel filter change from 0 to 0 14:44:43 FLIGetFilterPos err=0 currentPosition=0 14:44:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:43 Filter is already there-color wheel unchanged 14:44:43 Received message from Master: op=Shutter serial=277832 14:44:43 Shutter LASER open 14:44:43 Received message from Camera: op=State serial=277834 14:44:43 GetSingleValue result=40 Value=cccccccc 14:44:43 SkyScan query 14:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:44:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:44 Parameters OK 14:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:44 Set A/D data flow result=40 14:44:44 Set A/D channel type result=40 14:44:44 Set A/D encoding result=40 14:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:44 Set channel filter=0.000000e+000 result=40 14:44:44 Config A/D Result=40 14:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:44 Get A/D filter: -9.255963e+061 result=40 14:44:44 Get A/D value=-858993460 result=40 14:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:44 Parameters OK 14:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:44 Set A/D data flow result=40 14:44:44 Set A/D channel type result=40 14:44:44 Set A/D encoding result=40 14:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:44 Set channel filter=0.000000e+000 result=40 14:44:44 Config A/D Result=40 14:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:44 Get A/D filter: -9.255963e+061 result=40 14:44:44 Get A/D value=-858993460 result=40 14:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:44 Aux= 14:44:44 Message to Camera, serial 277834 queued 14:44:52 Received message from Master: op=Shutter serial=277844 14:44:52 Shutter LASER close 14:44:53 Received message from Master: op=PointingHead serial=277848 14:44:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:44:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:44:53 Point started: ret=0 14:44:53 point_skyscan result=0 14:44:54 Check angles 14:44:54 SkyScan query 14:44:55 SkyScan query done: ret=0 az=90.09<-6006 ze=157.41<-1506 Statuses=0009 0009 14:44:55 Msec=0 True Az=90.09 Ze=157.41 Az status=0009 Ze status=0009 14:44:55 Check angles 14:44:55 SkyScan query 14:44:55 SkyScan query done: ret=0 az=72.6<-4840 ze=136.44<-2904 Statuses=0009 0009 14:44:55 Msec=750 True Az=72.6 Ze=136.44 Az status=0009 Ze status=0009 14:44:55 Check angles 14:44:55 SkyScan query 14:44:56 SkyScan query done: ret=0 az=55.2<-3680 ze=115.53<-4298 Statuses=0009 0009 14:44:56 Msec=1500 True Az=55.2 Ze=115.53 Az status=0009 Ze status=0009 14:44:56 Check angles 14:44:56 SkyScan query 14:44:57 SkyScan query done: ret=0 az=40.995<-2733 ze=94.545<-5697 Statuses=0009 0009 14:44:57 Msec=2250 True Az=40.995 Ze=94.545 Az status=0009 Ze status=0009 14:44:57 Check angles 14:44:57 SkyScan query 14:44:58 SkyScan query done: ret=0 az=40.995<-2733 ze=73.62<-7092 Statuses=0008 0009 14:44:58 Msec=3000 True Az=40.995 Ze=73.62 Az status=0008 Ze status=0009 14:44:58 Check angles 14:44:58 SkyScan query 14:44:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.965<-8469 Statuses=0008 0009 14:44:58 Msec=3750 True Az=40.995 Ze=52.965 Az status=0008 Ze status=0009 14:44:58 Check angles 14:44:58 SkyScan query 14:44:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:44:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:44:59 Message to Master queued w/err=0: serial=277848 error=0 14:45:04 Received message from Master: op=Filter serial=277849 14:45:04 Color wheel filter change from 0 to 0 14:45:04 FLIGetFilterPos err=0 currentPosition=0 14:45:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:04 Filter is already there-color wheel unchanged 14:45:04 Received message from Master: op=Shutter serial=277850 14:45:04 Shutter LASER close 14:45:04 Received message from Camera: op=State serial=277852 14:45:04 GetSingleValue result=40 Value=cccccccc 14:45:04 SkyScan query 14:45:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:45:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:05 Parameters OK 14:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:05 Set A/D data flow result=40 14:45:05 Set A/D channel type result=40 14:45:05 Set A/D encoding result=40 14:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:05 Set channel filter=0.000000e+000 result=40 14:45:05 Config A/D Result=40 14:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:05 Get A/D filter: -9.255963e+061 result=40 14:45:05 Get A/D value=-858993460 result=40 14:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:05 Parameters OK 14:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:05 Set A/D data flow result=40 14:45:05 Set A/D channel type result=40 14:45:05 Set A/D encoding result=40 14:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:05 Set channel filter=0.000000e+000 result=40 14:45:05 Config A/D Result=40 14:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:05 Get A/D filter: -9.255963e+061 result=40 14:45:05 Get A/D value=-858993460 result=40 14:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:05 Aux= [UTC 2018-12-19 14:45:05] 14:45:05 Message to Camera, serial 277852 queued 14:45:27 Received message from Master: op=Identify serial=277853 14:45:42 Received message from Master: op=PointingHead serial=277868 14:45:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:45:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:45:42 Point started: ret=0 14:45:42 point_skyscan result=0 14:45:43 Check angles 14:45:43 SkyScan query 14:45:44 SkyScan query done: ret=0 az=64.38<-4292 ze=66.54<-7564 Statuses=0009 0008 14:45:44 Msec=0 True Az=64.38 Ze=66.54 Az status=0009 Ze status=0008 14:45:44 Check angles 14:45:44 SkyScan query 14:45:44 SkyScan query done: ret=0 az=81.795<-5453 ze=66.51<-7566 Statuses=0009 0008 14:45:44 Msec=750 True Az=81.795 Ze=66.51 Az status=0009 Ze status=0008 14:45:44 Check angles 14:45:44 SkyScan query 14:45:45 SkyScan query done: ret=0 az=99.315<-6621 ze=66.495<-7567 Statuses=0009 0008 14:45:45 Msec=1500 True Az=99.315 Ze=66.495 Az status=0009 Ze status=0008 14:45:45 Check angles 14:45:45 SkyScan query 14:45:46 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 14:45:46 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 14:45:46 Check angles 14:45:46 SkyScan query 14:45:47 SkyScan query done: ret=0 az=134.16<-8944 ze=66.495<-7567 Statuses=0009 0008 14:45:47 Msec=3000 True Az=134.16 Ze=66.495 Az status=0009 Ze status=0008 14:45:47 Check angles 14:45:47 SkyScan query 14:45:47 SkyScan query done: ret=0 az=151.59<-10106 ze=66.495<-7567 Statuses=0009 0008 14:45:47 Msec=3750 True Az=151.59 Ze=66.495 Az status=0009 Ze status=0008 14:45:47 Check angles 14:45:47 SkyScan query 14:45:48 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:45:48 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:45:48 Message to Master queued w/err=0: serial=277868 error=0 14:45:53 Received message from Master: op=Filter serial=277869 14:45:53 Color wheel filter change from 0 to 0 14:45:53 FLIGetFilterPos err=0 currentPosition=0 14:45:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:53 Filter is already there-color wheel unchanged 14:45:53 Received message from Master: op=Shutter serial=277870 14:45:53 Shutter LASER close 14:45:53 Received message from Camera: op=State serial=277872 14:45:53 GetSingleValue result=40 Value=cccccccc 14:45:53 SkyScan query 14:45:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:45:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:54 Parameters OK 14:45:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:54 Set A/D data flow result=40 14:45:54 Set A/D channel type result=40 14:45:54 Set A/D encoding result=40 14:45:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:54 Set channel filter=0.000000e+000 result=40 14:45:54 Config A/D Result=40 14:45:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:54 Get A/D filter: -9.255963e+061 result=40 14:45:54 Get A/D value=-858993460 result=40 14:45:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:54 Parameters OK 14:45:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:54 Set A/D data flow result=40 14:45:54 Set A/D channel type result=40 14:45:54 Set A/D encoding result=40 14:45:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:54 Set channel filter=0.000000e+000 result=40 14:45:54 Config A/D Result=40 14:45:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:54 Get A/D filter: -9.255963e+061 result=40 14:45:54 Get A/D value=-858993460 result=40 14:45:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:54 Aux= 14:45:54 Message to Camera, serial 277872 queued 14:46:31 Received message from Master: op=PointingHead serial=277885 14:46:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:46:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:46:31 Point started: ret=0 14:46:31 point_skyscan result=0 14:46:32 Check angles 14:46:32 SkyScan query 14:46:32 SkyScan query done: ret=0 az=134.595<-8973 ze=36.3<-9580 Statuses=0009 0009 14:46:32 Msec=0 True Az=134.595 Ze=36.3 Az status=0009 Ze status=0009 14:46:33 Check angles 14:46:33 SkyScan query 14:46:33 SkyScan query done: ret=0 az=117.15<-7810 ze=15.375<-10975 Statuses=0009 0009 14:46:33 Msec=750 True Az=117.15 Ze=15.375 Az status=0009 Ze status=0009 14:46:33 Check angles 14:46:33 SkyScan query 14:46:34 SkyScan query done: ret=0 az=99.345<-6623 ze=-6.135<-12409 Statuses=0009 0009 14:46:34 Msec=1500 True Az=99.345 Ze=-6.135 Az status=0009 Ze status=0009 14:46:34 Check angles 14:46:34 SkyScan query 14:46:35 SkyScan query done: ret=0 az=81.84<-5456 ze=-27.09<-13806 Statuses=0009 0009 14:46:35 Msec=2250 True Az=81.84 Ze=-27.09 Az status=0009 Ze status=0009 14:46:35 Check angles 14:46:35 SkyScan query 14:46:35 SkyScan query done: ret=0 az=64.38<-4292 ze=-38.58<-14572 Statuses=0009 0008 14:46:35 Msec=3000 True Az=64.38 Ze=-38.58 Az status=0009 Ze status=0008 14:46:36 Check angles 14:46:36 SkyScan query 14:46:36 SkyScan query done: ret=0 az=46.95<-3130 ze=-38.52<-14568 Statuses=0009 0008 14:46:36 Msec=3750 True Az=46.95 Ze=-38.52 Az status=0009 Ze status=0008 14:46:36 Check angles 14:46:36 SkyScan query 14:46:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:46:37 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:46:37 Message to Master queued w/err=0: serial=277885 error=0 14:46:42 Received message from Master: op=Filter serial=277886 14:46:42 Color wheel filter change from 0 to 0 14:46:42 FLIGetFilterPos err=0 currentPosition=0 14:46:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:42 Filter is already there-color wheel unchanged 14:46:42 Received message from Master: op=Shutter serial=277887 14:46:42 Shutter LASER close 14:46:42 Received message from Camera: op=State serial=277889 14:46:42 GetSingleValue result=40 Value=cccccccc 14:46:42 SkyScan query 14:46:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:46:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:43 Parameters OK 14:46:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:43 Set A/D data flow result=40 14:46:43 Set A/D channel type result=40 14:46:43 Set A/D encoding result=40 14:46:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:43 Set channel filter=0.000000e+000 result=40 14:46:43 Config A/D Result=40 14:46:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:43 Get A/D filter: -9.255963e+061 result=40 14:46:43 Get A/D value=-858993460 result=40 14:46:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:43 Parameters OK 14:46:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:43 Set A/D data flow result=40 14:46:43 Set A/D channel type result=40 14:46:43 Set A/D encoding result=40 14:46:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:43 Set channel filter=0.000000e+000 result=40 14:46:43 Config A/D Result=40 14:46:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:43 Get A/D filter: -9.255963e+061 result=40 14:46:43 Get A/D value=-858993460 result=40 14:46:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:43 Aux= 14:46:43 Message to Camera, serial 277889 queued 14:47:19 Received message from Master: op=PointingHead serial=277902 14:47:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:47:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:47:20 Point started: ret=0 14:47:20 point_skyscan result=0 14:47:21 Check angles 14:47:21 SkyScan query 14:47:21 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.535<-16569 Statuses=0009 0009 14:47:21 Msec=0 True Az=64.185 Ze=-68.535 Az status=0009 Ze status=0009 14:47:21 Check angles 14:47:21 SkyScan query 14:47:22 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.505<-17967 Statuses=0009 0009 14:47:22 Msec=750 True Az=81.66 Ze=-89.505 Az status=0009 Ze status=0009 14:47:22 Check angles 14:47:22 SkyScan query 14:47:23 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.43<-19362 Statuses=0009 0009 14:47:23 Msec=1500 True Az=99.15 Ze=-110.43 Az status=0009 Ze status=0009 14:47:23 Check angles 14:47:23 SkyScan query 14:47:23 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.34<-20756 Statuses=0009 0009 14:47:23 Msec=2250 True Az=116.7 Ze=-131.34 Az status=0009 Ze status=0009 14:47:24 Check angles 14:47:24 SkyScan query 14:47:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 14:47:24 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 14:47:24 Check angles 14:47:24 SkyScan query 14:47:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:47:25 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:47:25 Message to Master queued w/err=0: serial=277902 error=0 14:47:30 Received message from Master: op=Filter serial=277903 14:47:30 Color wheel filter change from 0 to 0 14:47:30 FLIGetFilterPos err=0 currentPosition=0 14:47:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:30 Filter is already there-color wheel unchanged 14:47:30 Received message from Master: op=Shutter serial=277904 14:47:30 Shutter LASER close 14:47:30 Received message from Camera: op=State serial=277906 14:47:30 GetSingleValue result=40 Value=cccccccc 14:47:30 SkyScan query 14:47:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:47:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:31 Parameters OK 14:47:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:31 Set A/D data flow result=40 14:47:31 Set A/D channel type result=40 14:47:31 Set A/D encoding result=40 14:47:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:31 Set channel filter=0.000000e+000 result=40 14:47:31 Config A/D Result=40 14:47:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:31 Get A/D filter: -9.255963e+061 result=40 14:47:31 Get A/D value=-858993460 result=40 14:47:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:31 Parameters OK 14:47:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:31 Set A/D data flow result=40 14:47:31 Set A/D channel type result=40 14:47:31 Set A/D encoding result=40 14:47:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:31 Set channel filter=0.000000e+000 result=40 14:47:31 Config A/D Result=40 14:47:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:31 Get A/D filter: -9.255963e+061 result=40 14:47:31 Get A/D value=-858993460 result=40 14:47:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:31 Aux= 14:47:31 Message to Camera, serial 277906 queued 14:48:08 Received message from Master: op=PointingHead serial=277919 14:48:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:48:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:48:08 Point started: ret=0 14:48:08 point_skyscan result=0 14:48:09 Check angles 14:48:09 SkyScan query 14:48:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 14:48:09 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 14:48:09 Check angles 14:48:09 SkyScan query 14:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:48:10 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:48:10 Message to Master queued w/err=0: serial=277919 error=0 14:48:15 Received message from Master: op=Filter serial=277920 14:48:15 Color wheel filter change from 0 to 0 14:48:15 FLIGetFilterPos err=0 currentPosition=0 14:48:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:15 Filter is already there-color wheel unchanged 14:48:15 Received message from Master: op=Shutter serial=277921 14:48:15 Shutter LASER open 14:48:15 Received message from Camera: op=State serial=277923 14:48:15 GetSingleValue result=40 Value=cccccccc 14:48:15 SkyScan query 14:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:48:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:16 Parameters OK 14:48:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:16 Set A/D data flow result=40 14:48:16 Set A/D channel type result=40 14:48:16 Set A/D encoding result=40 14:48:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:16 Set channel filter=0.000000e+000 result=40 14:48:16 Config A/D Result=40 14:48:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:16 Get A/D filter: -9.255963e+061 result=40 14:48:16 Get A/D value=-858993460 result=40 14:48:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:16 Parameters OK 14:48:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:16 Set A/D data flow result=40 14:48:16 Set A/D channel type result=40 14:48:16 Set A/D encoding result=40 14:48:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:16 Set channel filter=0.000000e+000 result=40 14:48:16 Config A/D Result=40 14:48:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:16 Get A/D filter: -9.255963e+061 result=40 14:48:16 Get A/D value=-858993460 result=40 14:48:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:16 Aux= 14:48:16 Message to Camera, serial 277923 queued 14:48:23 Received message from Master: op=Shutter serial=277932 14:48:23 Shutter LASER close 14:48:24 Received message from Master: op=PointingHead serial=277936 14:48:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:48:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:48:24 Point started: ret=0 14:48:24 point_skyscan result=0 14:48:25 Check angles 14:48:25 SkyScan query 14:48:26 SkyScan query done: ret=0 az=136.125<-9075 ze=-143.025<-21535 Statuses=0009 0009 14:48:26 Msec=0 True Az=136.125 Ze=-143.025 Az status=0009 Ze status=0009 14:48:26 Check angles 14:48:26 SkyScan query 14:48:26 SkyScan query done: ret=0 az=154.065<-10271 ze=-121.665<-20111 Statuses=0009 0009 14:48:26 Msec=750 True Az=154.065 Ze=-121.665 Az status=0009 Ze status=0009 14:48:27 Check angles 14:48:27 SkyScan query 14:48:27 SkyScan query done: ret=0 az=171.54<-11436 ze=-100.53<-18702 Statuses=0009 0009 14:48:27 Msec=1500 True Az=171.54 Ze=-100.53 Az status=0009 Ze status=0009 14:48:27 Check angles 14:48:27 SkyScan query 14:48:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.695<-17313 Statuses=0008 0009 14:48:28 Msec=2250 True Az=176.01 Ze=-79.695 Az status=0008 Ze status=0009 14:48:28 Check angles 14:48:28 SkyScan query 14:48:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.26<-15884 Statuses=0008 0009 14:48:29 Msec=3000 True Az=176.01 Ze=-58.26 Az status=0008 Ze status=0009 14:48:29 Check angles 14:48:29 SkyScan query 14:48:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:48:29 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:48:29 Message to Master queued w/err=0: serial=277936 error=0 14:48:34 Received message from Master: op=Filter serial=277937 14:48:34 Color wheel filter change from 0 to 0 14:48:34 FLIGetFilterPos err=0 currentPosition=0 14:48:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:34 Filter is already there-color wheel unchanged 14:48:35 Received message from Master: op=Shutter serial=277938 14:48:35 Shutter LASER close 14:48:35 Received message from Camera: op=State serial=277940 14:48:35 GetSingleValue result=40 Value=cccccccc 14:48:35 SkyScan query 14:48:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:48:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:35 Parameters OK 14:48:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:35 Set A/D data flow result=40 14:48:35 Set A/D channel type result=40 14:48:35 Set A/D encoding result=40 14:48:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:35 Set channel filter=0.000000e+000 result=40 14:48:35 Config A/D Result=40 14:48:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:35 Get A/D filter: -9.255963e+061 result=40 14:48:35 Get A/D value=-858993460 result=40 14:48:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:35 Parameters OK 14:48:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:35 Set A/D data flow result=40 14:48:35 Set A/D channel type result=40 14:48:35 Set A/D encoding result=40 14:48:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:35 Set channel filter=0.000000e+000 result=40 14:48:35 Config A/D Result=40 14:48:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:35 Get A/D filter: -9.255963e+061 result=40 14:48:35 Get A/D value=-858993460 result=40 14:48:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:35 Aux= 14:48:35 Message to Camera, serial 277940 queued 14:49:12 Received message from Master: op=PointingHead serial=277953 14:49:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:49:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:49:13 Point started: ret=0 14:49:13 point_skyscan result=0 14:49:13 Check angles 14:49:13 SkyScan query 14:49:14 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.765<-13451 Statuses=0009 0009 14:49:14 Msec=0 True Az=152.955 Ze=-21.765 Az status=0009 Ze status=0009 14:49:14 Check angles 14:49:14 SkyScan query 14:49:15 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.36<-12024 Statuses=0009 0009 14:49:15 Msec=750 True Az=135.135 Ze=-0.36 Az status=0009 Ze status=0009 14:49:15 Check angles 14:49:15 SkyScan query 14:49:15 SkyScan query done: ret=0 az=117.645<-7843 ze=20.61<-10626 Statuses=0009 0009 14:49:15 Msec=1500 True Az=117.645 Ze=20.61 Az status=0009 Ze status=0009 14:49:16 Check angles 14:49:16 SkyScan query 14:49:16 SkyScan query done: ret=0 az=100.32<-6688 ze=41.55<-9230 Statuses=0009 0009 14:49:16 Msec=2250 True Az=100.32 Ze=41.55 Az status=0009 Ze status=0009 14:49:16 Check angles 14:49:16 SkyScan query 14:49:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 14:49:17 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 14:49:17 Check angles 14:49:17 SkyScan query 14:49:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 14:49:18 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 14:49:18 Message to Master queued w/err=0: serial=277953 error=0 14:49:23 Received message from Master: op=Filter serial=277954 14:49:23 Color wheel filter change from 0 to 0 14:49:23 FLIGetFilterPos err=0 currentPosition=0 14:49:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:23 Filter is already there-color wheel unchanged 14:49:23 Received message from Master: op=Shutter serial=277955 14:49:23 Shutter LASER close 14:49:23 Received message from Camera: op=State serial=277957 14:49:23 GetSingleValue result=40 Value=cccccccc 14:49:23 SkyScan query 14:49:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:49:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:23 Parameters OK 14:49:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:23 Set A/D data flow result=40 14:49:23 Set A/D channel type result=40 14:49:23 Set A/D encoding result=40 14:49:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:23 Set channel filter=0.000000e+000 result=40 14:49:23 Config A/D Result=40 14:49:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:23 Get A/D filter: -9.255963e+061 result=40 14:49:23 Get A/D value=-858993460 result=40 14:49:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:23 Parameters OK 14:49:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:23 Set A/D data flow result=40 14:49:23 Set A/D channel type result=40 14:49:23 Set A/D encoding result=40 14:49:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:23 Set channel filter=0.000000e+000 result=40 14:49:23 Config A/D Result=40 14:49:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:23 Get A/D filter: -9.255963e+061 result=40 14:49:23 Get A/D value=-858993460 result=40 14:49:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:23 Aux= 14:49:23 Message to Camera, serial 277957 queued 14:49:59 Received message from Master: op=PointingHead serial=277969 14:49:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:49:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:50:00 Point started: ret=0 14:50:00 point_skyscan result=0 14:50:00 Check angles 14:50:00 SkyScan query 14:50:01 SkyScan query done: ret=0 az=108.885<-7259 ze=38.475<-9435 Statuses=0009 0008 14:50:01 Msec=0 True Az=108.885 Ze=38.475 Az status=0009 Ze status=0008 14:50:01 Check angles 14:50:01 SkyScan query 14:50:02 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 14:50:02 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 14:50:02 Check angles 14:50:02 SkyScan query 14:50:03 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 14:50:03 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 14:50:03 Check angles 14:50:03 SkyScan query 14:50:03 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 14:50:03 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 14:50:03 Check angles 14:50:03 SkyScan query 14:50:04 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:50:04 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:50:04 Check angles 14:50:04 SkyScan query 14:50:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:50:05 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:50:05 Message to Master queued w/err=0: serial=277969 error=0 14:50:10 Received message from Master: op=Filter serial=277970 14:50:10 Color wheel filter change from 0 to 0 14:50:10 FLIGetFilterPos err=0 currentPosition=0 14:50:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:10 Filter is already there-color wheel unchanged 14:50:10 Received message from Master: op=Shutter serial=277971 14:50:10 Shutter LASER close 14:50:10 Received message from Camera: op=State serial=277973 14:50:10 GetSingleValue result=40 Value=cccccccc 14:50:10 SkyScan query 14:50:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:50:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:11 Parameters OK 14:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:11 Set A/D data flow result=40 14:50:11 Set A/D channel type result=40 14:50:11 Set A/D encoding result=40 14:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:11 Set channel filter=0.000000e+000 result=40 14:50:11 Config A/D Result=40 14:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:11 Get A/D filter: -9.255963e+061 result=40 14:50:11 Get A/D value=-858993460 result=40 14:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:11 Parameters OK 14:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:11 Set A/D data flow result=40 14:50:11 Set A/D channel type result=40 14:50:11 Set A/D encoding result=40 14:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:11 Set channel filter=0.000000e+000 result=40 14:50:11 Config A/D Result=40 14:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:11 Get A/D filter: -9.255963e+061 result=40 14:50:11 Get A/D value=-858993460 result=40 14:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:11 Aux= 14:50:11 Message to Camera, serial 277973 queued 14:50:47 Received message from Master: op=PointingHead serial=277986 14:50:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:50:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:50:48 Point started: ret=0 14:50:48 point_skyscan result=0 14:50:48 Check angles 14:50:48 SkyScan query 14:50:49 SkyScan query done: ret=0 az=152.73<-10182 ze=8.37<-11442 Statuses=0009 0009 14:50:49 Msec=0 True Az=152.73 Ze=8.37 Az status=0009 Ze status=0009 14:50:49 Check angles 14:50:49 SkyScan query 14:50:50 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.525<-12835 Statuses=0009 0009 14:50:50 Msec=750 True Az=135.285 Ze=-12.525 Az status=0009 Ze status=0009 14:50:50 Check angles 14:50:50 SkyScan query 14:50:51 SkyScan query done: ret=0 az=117.435<-7829 ze=-34.065<-14271 Statuses=0009 0009 14:50:51 Msec=1500 True Az=117.435 Ze=-34.065 Az status=0009 Ze status=0009 14:50:51 Check angles 14:50:51 SkyScan query 14:50:51 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.57<-15438 Statuses=0009 0009 14:50:51 Msec=2250 True Az=100.065 Ze=-51.57 Az status=0009 Ze status=0009 14:50:51 Check angles 14:50:51 SkyScan query 14:50:52 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:50:52 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:50:52 Check angles 14:50:52 SkyScan query 14:50:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:50:53 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:50:53 Message to Master queued w/err=0: serial=277986 error=0 14:50:58 Received message from Master: op=Filter serial=277987 14:50:58 Color wheel filter change from 0 to 0 14:50:58 FLIGetFilterPos err=0 currentPosition=0 14:50:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:58 Filter is already there-color wheel unchanged 14:50:58 Received message from Master: op=Shutter serial=277988 14:50:58 Shutter LASER close 14:50:58 Received message from Camera: op=State serial=277990 14:50:58 GetSingleValue result=40 Value=cccccccc 14:50:58 SkyScan query 14:50:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:50:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:59 Parameters OK 14:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:59 Set A/D data flow result=40 14:50:59 Set A/D channel type result=40 14:50:59 Set A/D encoding result=40 14:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:59 Set channel filter=0.000000e+000 result=40 14:50:59 Config A/D Result=40 14:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:59 Get A/D filter: -9.255963e+061 result=40 14:50:59 Get A/D value=-858993460 result=40 14:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:59 Parameters OK 14:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:59 Set A/D data flow result=40 14:50:59 Set A/D channel type result=40 14:50:59 Set A/D encoding result=40 14:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:59 Set channel filter=0.000000e+000 result=40 14:50:59 Config A/D Result=40 14:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:59 Get A/D filter: -9.255963e+061 result=40 14:50:59 Get A/D value=-858993460 result=40 14:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:59 Aux= 14:50:59 Message to Camera, serial 277990 queued 14:51:35 Received message from Master: op=PointingHead serial=278003 14:51:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:51:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:51:36 Point started: ret=0 14:51:36 point_skyscan result=0 14:51:37 Check angles 14:51:37 SkyScan query 14:51:37 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.195<-17413 Statuses=0009 0009 14:51:37 Msec=0 True Az=108.975 Ze=-81.195 Az status=0009 Ze status=0009 14:51:37 Check angles 14:51:37 SkyScan query 14:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.6<-18840 Statuses=0008 0009 14:51:38 Msec=750 True Az=112.995 Ze=-102.6 Az status=0008 Ze status=0009 14:51:38 Check angles 14:51:38 SkyScan query 14:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.57<-20238 Statuses=0008 0009 14:51:39 Msec=1500 True Az=112.995 Ze=-123.57 Az status=0008 Ze status=0009 14:51:39 Check angles 14:51:39 SkyScan query 14:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.48<-21632 Statuses=0008 0009 14:51:39 Msec=2250 True Az=112.995 Ze=-144.48 Az status=0008 Ze status=0009 14:51:40 Check angles 14:51:40 SkyScan query 14:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.45<-23030 Statuses=0008 0009 14:51:40 Msec=3000 True Az=112.995 Ze=-165.45 Az status=0008 Ze status=0009 14:51:40 Check angles 14:51:40 SkyScan query 14:51:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:51:41 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:51:41 Message to Master queued w/err=0: serial=278003 error=0 14:51:46 Received message from Master: op=Filter serial=278004 14:51:46 Color wheel filter change from 0 to 0 14:51:46 FLIGetFilterPos err=0 currentPosition=0 14:51:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:46 Filter is already there-color wheel unchanged 14:51:46 Received message from Master: op=Shutter serial=278005 14:51:46 Shutter LASER open 14:51:46 Received message from Camera: op=State serial=278007 14:51:46 GetSingleValue result=40 Value=cccccccc 14:51:46 SkyScan query 14:51:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:51:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:47 Parameters OK 14:51:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:47 Set A/D data flow result=40 14:51:47 Set A/D channel type result=40 14:51:47 Set A/D encoding result=40 14:51:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:47 Set channel filter=0.000000e+000 result=40 14:51:47 Config A/D Result=40 14:51:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:47 Get A/D filter: -9.255963e+061 result=40 14:51:47 Get A/D value=-858993460 result=40 14:51:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:47 Parameters OK 14:51:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:47 Set A/D data flow result=40 14:51:47 Set A/D channel type result=40 14:51:47 Set A/D encoding result=40 14:51:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:47 Set channel filter=0.000000e+000 result=40 14:51:47 Config A/D Result=40 14:51:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:47 Get A/D filter: -9.255963e+061 result=40 14:51:47 Get A/D value=-858993460 result=40 14:51:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:47 Aux= 14:51:47 Message to Camera, serial 278007 queued 14:51:55 Received message from Master: op=Shutter serial=278017 14:51:55 Shutter LASER close 14:51:56 Received message from Master: op=PointingHead serial=278021 14:51:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:51:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:51:56 Point started: ret=0 14:51:56 point_skyscan result=0 14:51:57 Check angles 14:51:57 SkyScan query 14:51:57 SkyScan query done: ret=0 az=89.43<-5962 ze=156.78<-1548 Statuses=0009 0009 14:51:57 Msec=0 True Az=89.43 Ze=156.78 Az status=0009 Ze status=0009 14:51:58 Check angles 14:51:58 SkyScan query 14:51:58 SkyScan query done: ret=0 az=71.97<-4798 ze=135.84<-2944 Statuses=0009 0009 14:51:58 Msec=750 True Az=71.97 Ze=135.84 Az status=0009 Ze status=0009 14:51:58 Check angles 14:51:58 SkyScan query 14:51:59 SkyScan query done: ret=0 az=54.525<-3635 ze=114.855<-4343 Statuses=0009 0009 14:51:59 Msec=1500 True Az=54.525 Ze=114.855 Az status=0009 Ze status=0009 14:51:59 Check angles 14:51:59 SkyScan query 14:52:00 SkyScan query done: ret=0 az=40.98<-2732 ze=93.93<-5738 Statuses=0009 0009 14:52:00 Msec=2250 True Az=40.98 Ze=93.93 Az status=0009 Ze status=0009 14:52:00 Check angles 14:52:00 SkyScan query 14:52:00 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 14:52:00 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 14:52:01 Check angles 14:52:01 SkyScan query 14:52:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 14:52:01 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 14:52:01 Check angles 14:52:01 SkyScan query 14:52:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:52:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:52:02 Message to Master queued w/err=0: serial=278021 error=0 14:52:07 Received message from Master: op=Filter serial=278022 14:52:07 Color wheel filter change from 0 to 0 14:52:07 FLIGetFilterPos err=0 currentPosition=0 14:52:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:07 Filter is already there-color wheel unchanged 14:52:07 Received message from Master: op=Shutter serial=278023 14:52:07 Shutter LASER close 14:52:07 Received message from Camera: op=State serial=278025 14:52:07 GetSingleValue result=40 Value=cccccccc 14:52:07 SkyScan query 14:52:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:08 Parameters OK 14:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:08 Set A/D data flow result=40 14:52:08 Set A/D channel type result=40 14:52:08 Set A/D encoding result=40 14:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:08 Set channel filter=0.000000e+000 result=40 14:52:08 Config A/D Result=40 14:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:08 Get A/D filter: -9.255963e+061 result=40 14:52:08 Get A/D value=-858993460 result=40 14:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:08 Parameters OK 14:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:08 Set A/D data flow result=40 14:52:08 Set A/D channel type result=40 14:52:08 Set A/D encoding result=40 14:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:08 Set channel filter=0.000000e+000 result=40 14:52:08 Config A/D Result=40 14:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:08 Get A/D filter: -9.255963e+061 result=40 14:52:08 Get A/D value=-858993460 result=40 14:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:08 Aux= 14:52:08 Message to Camera, serial 278025 queued 14:52:45 Received message from Master: op=PointingHead serial=278038 14:52:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:52:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:52:45 Point started: ret=0 14:52:45 point_skyscan result=0 14:52:46 Check angles 14:52:46 SkyScan query 14:52:46 SkyScan query done: ret=0 az=63.915<-4261 ze=66.54<-7564 Statuses=0009 0008 14:52:46 Msec=0 True Az=63.915 Ze=66.54 Az status=0009 Ze status=0008 14:52:46 Check angles 14:52:46 SkyScan query 14:52:47 SkyScan query done: ret=0 az=81.795<-5453 ze=66.51<-7566 Statuses=0009 0008 14:52:47 Msec=750 True Az=81.795 Ze=66.51 Az status=0009 Ze status=0008 14:52:47 Check angles 14:52:47 SkyScan query 14:52:48 SkyScan query done: ret=0 az=99.315<-6621 ze=66.495<-7567 Statuses=0009 0008 14:52:48 Msec=1500 True Az=99.315 Ze=66.495 Az status=0009 Ze status=0008 14:52:48 Check angles 14:52:48 SkyScan query 14:52:49 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 14:52:49 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 14:52:49 Check angles 14:52:49 SkyScan query 14:52:49 SkyScan query done: ret=0 az=134.16<-8944 ze=66.495<-7567 Statuses=0009 0008 14:52:49 Msec=3000 True Az=134.16 Ze=66.495 Az status=0009 Ze status=0008 14:52:49 Check angles 14:52:49 SkyScan query 14:52:50 SkyScan query done: ret=0 az=151.59<-10106 ze=66.495<-7567 Statuses=0009 0008 14:52:50 Msec=3750 True Az=151.59 Ze=66.495 Az status=0009 Ze status=0008 14:52:50 Check angles 14:52:50 SkyScan query 14:52:51 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:52:51 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:52:51 Message to Master queued w/err=0: serial=278038 error=0 14:52:56 Received message from Master: op=Filter serial=278039 14:52:56 Color wheel filter change from 0 to 0 14:52:56 FLIGetFilterPos err=0 currentPosition=0 14:52:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:56 Filter is already there-color wheel unchanged 14:52:56 Received message from Master: op=Shutter serial=278040 14:52:56 Shutter LASER close 14:52:56 Received message from Camera: op=State serial=278042 14:52:56 GetSingleValue result=40 Value=cccccccc 14:52:56 SkyScan query 14:52:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:52:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:57 Parameters OK 14:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:57 Set A/D data flow result=40 14:52:57 Set A/D channel type result=40 14:52:57 Set A/D encoding result=40 14:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:57 Set channel filter=0.000000e+000 result=40 14:52:57 Config A/D Result=40 14:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:57 Get A/D filter: -9.255963e+061 result=40 14:52:57 Get A/D value=-858993460 result=40 14:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:57 Parameters OK 14:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:57 Set A/D data flow result=40 14:52:57 Set A/D channel type result=40 14:52:57 Set A/D encoding result=40 14:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:57 Set channel filter=0.000000e+000 result=40 14:52:57 Config A/D Result=40 14:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:57 Get A/D filter: -9.255963e+061 result=40 14:52:57 Get A/D value=-858993460 result=40 14:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:57 Aux= 14:52:57 Message to Camera, serial 278042 queued 14:53:33 Received message from Master: op=PointingHead serial=278055 14:53:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:53:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:53:34 Point started: ret=0 14:53:34 point_skyscan result=0 14:53:35 Check angles 14:53:35 SkyScan query 14:53:35 SkyScan query done: ret=0 az=134.82<-8988 ze=36.585<-9561 Statuses=0009 0009 14:53:35 Msec=0 True Az=134.82 Ze=36.585 Az status=0009 Ze status=0009 14:53:35 Check angles 14:53:35 SkyScan query 14:53:36 SkyScan query done: ret=0 az=117.36<-7824 ze=15.645<-10957 Statuses=0009 0009 14:53:36 Msec=750 True Az=117.36 Ze=15.645 Az status=0009 Ze status=0009 14:53:36 Check angles 14:53:36 SkyScan query 14:53:37 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.325<-12355 Statuses=0009 0009 14:53:37 Msec=1500 True Az=99.975 Ze=-5.325 Az status=0009 Ze status=0009 14:53:37 Check angles 14:53:37 SkyScan query 14:53:37 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.775<-13785 Statuses=0009 0009 14:53:37 Msec=2250 True Az=82.125 Ze=-26.775 Az status=0009 Ze status=0009 14:53:38 Check angles 14:53:38 SkyScan query 14:53:38 SkyScan query done: ret=0 az=64.605<-4307 ze=-38.58<-14572 Statuses=0009 0008 14:53:38 Msec=3000 True Az=64.605 Ze=-38.58 Az status=0009 Ze status=0008 14:53:38 Check angles 14:53:38 SkyScan query 14:53:39 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.52<-14568 Statuses=0009 0008 14:53:39 Msec=3750 True Az=47.115 Ze=-38.52 Az status=0009 Ze status=0008 14:53:39 Check angles 14:53:39 SkyScan query 14:53:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:53:40 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:53:40 Message to Master queued w/err=0: serial=278055 error=0 14:53:45 Received message from Master: op=Filter serial=278056 14:53:45 Color wheel filter change from 0 to 0 14:53:45 FLIGetFilterPos err=0 currentPosition=0 14:53:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:45 Filter is already there-color wheel unchanged 14:53:45 Received message from Master: op=Shutter serial=278057 14:53:45 Shutter LASER close 14:53:45 Received message from Camera: op=State serial=278059 14:53:45 GetSingleValue result=40 Value=cccccccc 14:53:45 SkyScan query 14:53:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:53:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:45 Parameters OK 14:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:45 Set A/D data flow result=40 14:53:45 Set A/D channel type result=40 14:53:45 Set A/D encoding result=40 14:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:45 Set channel filter=0.000000e+000 result=40 14:53:45 Config A/D Result=40 14:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:45 Get A/D filter: -9.255963e+061 result=40 14:53:45 Get A/D value=-858993460 result=40 14:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:45 Parameters OK 14:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:45 Set A/D data flow result=40 14:53:45 Set A/D channel type result=40 14:53:45 Set A/D encoding result=40 14:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:45 Set channel filter=0.000000e+000 result=40 14:53:45 Config A/D Result=40 14:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:45 Get A/D filter: -9.255963e+061 result=40 14:53:45 Get A/D value=-858993460 result=40 14:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:45 Aux= 14:53:45 Message to Camera, serial 278059 queued 14:54:22 Received message from Master: op=PointingHead serial=278072 14:54:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:54:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:54:23 Point started: ret=0 14:54:23 point_skyscan result=0 14:54:23 Check angles 14:54:23 SkyScan query 14:54:24 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.46<-16564 Statuses=0009 0009 14:54:24 Msec=0 True Az=64.08 Ze=-68.46 Az status=0009 Ze status=0009 14:54:24 Check angles 14:54:24 SkyScan query 14:54:25 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.4<-17960 Statuses=0009 0009 14:54:25 Msec=750 True Az=81.57 Ze=-89.4 Az status=0009 Ze status=0009 14:54:25 Check angles 14:54:25 SkyScan query 14:54:25 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.385<-19359 Statuses=0009 0009 14:54:25 Msec=1500 True Az=99.135 Ze=-110.385 Az status=0009 Ze status=0009 14:54:26 Check angles 14:54:26 SkyScan query 14:54:26 SkyScan query done: ret=0 az=116.535<-7769 ze=-131.295<-20753 Statuses=0009 0009 14:54:26 Msec=2250 True Az=116.535 Ze=-131.295 Az status=0009 Ze status=0009 14:54:26 Check angles 14:54:26 SkyScan query 14:54:27 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 14:54:27 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 14:54:27 Check angles 14:54:27 SkyScan query 14:54:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:54:28 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:54:28 Message to Master queued w/err=0: serial=278072 error=0 14:54:33 Received message from Master: op=Filter serial=278073 14:54:33 Color wheel filter change from 0 to 0 14:54:33 FLIGetFilterPos err=0 currentPosition=0 14:54:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:33 Filter is already there-color wheel unchanged 14:54:33 Received message from Master: op=Shutter serial=278074 14:54:33 Shutter LASER close 14:54:33 Received message from Camera: op=State serial=278076 14:54:33 GetSingleValue result=40 Value=cccccccc 14:54:33 SkyScan query 14:54:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:54:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:33 Parameters OK 14:54:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:33 Set A/D data flow result=40 14:54:33 Set A/D channel type result=40 14:54:33 Set A/D encoding result=40 14:54:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:33 Set channel filter=0.000000e+000 result=40 14:54:33 Config A/D Result=40 14:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:33 Get A/D filter: -9.255963e+061 result=40 14:54:33 Get A/D value=-858993460 result=40 14:54:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:33 Parameters OK 14:54:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:33 Set A/D data flow result=40 14:54:33 Set A/D channel type result=40 14:54:33 Set A/D encoding result=40 14:54:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:33 Set channel filter=0.000000e+000 result=40 14:54:33 Config A/D Result=40 14:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:33 Get A/D filter: -9.255963e+061 result=40 14:54:33 Get A/D value=-858993460 result=40 14:54:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:33 Aux= 14:54:33 Message to Camera, serial 278076 queued 14:55:09 Received message from Master: op=PointingHead serial=278088 14:55:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:55:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:55:10 Point started: ret=0 14:55:10 point_skyscan result=0 14:55:10 Check angles 14:55:10 SkyScan query 14:55:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0009 0009 14:55:11 Msec=0 True Az=112.995 Ze=-170.895 Az status=0009 Ze status=0009 14:55:11 Check angles 14:55:11 SkyScan query 14:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:55:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:55:12 Message to Master queued w/err=0: serial=278088 error=0 14:55:17 Received message from Master: op=Filter serial=278089 14:55:17 Color wheel filter change from 0 to 0 14:55:17 FLIGetFilterPos err=0 currentPosition=0 14:55:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:17 Filter is already there-color wheel unchanged 14:55:17 Received message from Master: op=Shutter serial=278090 14:55:17 Shutter LASER open 14:55:17 Received message from Camera: op=State serial=278092 14:55:17 GetSingleValue result=40 Value=cccccccc 14:55:17 SkyScan query 14:55:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:55:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:18 Parameters OK 14:55:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:18 Set A/D data flow result=40 14:55:18 Set A/D channel type result=40 14:55:18 Set A/D encoding result=40 14:55:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:18 Set channel filter=0.000000e+000 result=40 14:55:18 Config A/D Result=40 14:55:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:18 Get A/D filter: -9.255963e+061 result=40 14:55:18 Get A/D value=-858993460 result=40 14:55:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:18 Parameters OK 14:55:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:18 Set A/D data flow result=40 14:55:18 Set A/D channel type result=40 14:55:18 Set A/D encoding result=40 14:55:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:18 Set channel filter=0.000000e+000 result=40 14:55:18 Config A/D Result=40 14:55:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:18 Get A/D filter: -9.255963e+061 result=40 14:55:18 Get A/D value=-858993460 result=40 14:55:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:18 Aux= 14:55:18 Message to Camera, serial 278092 queued 14:55:26 Received message from Master: op=Shutter serial=278102 14:55:26 Shutter LASER close 14:55:27 Received message from Master: op=PointingHead serial=278106 14:55:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:55:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:55:27 Point started: ret=0 14:55:27 point_skyscan result=0 14:55:28 Check angles 14:55:28 SkyScan query 14:55:28 SkyScan query done: ret=0 az=136.125<-9075 ze=-143.22<-21548 Statuses=0009 0009 14:55:28 Msec=0 True Az=136.125 Ze=-143.22 Az status=0009 Ze status=0009 [UTC 2018-12-19 14:55:29] 14:55:29 Check angles 14:55:29 SkyScan query 14:55:29 SkyScan query done: ret=0 az=155.34<-10356 ze=-120.09<-20006 Statuses=0009 0009 14:55:29 Msec=750 True Az=155.34 Ze=-120.09 Az status=0009 Ze status=0009 14:55:29 Check angles 14:55:29 SkyScan query 14:55:30 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.8<-18720 Statuses=0009 0009 14:55:30 Msec=1500 True Az=171.39 Ze=-100.8 Az status=0009 Ze status=0009 14:55:30 Check angles 14:55:30 SkyScan query 14:55:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.935<-17329 Statuses=0008 0009 14:55:31 Msec=2250 True Az=176.01 Ze=-79.935 Az status=0008 Ze status=0009 14:55:31 Check angles 14:55:31 SkyScan query 14:55:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 14:55:31 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 14:55:32 Check angles 14:55:32 SkyScan query 14:55:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:55:32 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:55:32 Message to Master queued w/err=0: serial=278106 error=0 14:55:37 Received message from Master: op=Filter serial=278107 14:55:37 Color wheel filter change from 0 to 0 14:55:37 FLIGetFilterPos err=0 currentPosition=0 14:55:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:37 Filter is already there-color wheel unchanged 14:55:37 Received message from Master: op=Shutter serial=278108 14:55:37 Shutter LASER close 14:55:38 Received message from Camera: op=State serial=278110 14:55:38 GetSingleValue result=40 Value=cccccccc 14:55:38 SkyScan query 14:55:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:55:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:38 Parameters OK 14:55:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:38 Set A/D data flow result=40 14:55:38 Set A/D channel type result=40 14:55:38 Set A/D encoding result=40 14:55:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:38 Set channel filter=0.000000e+000 result=40 14:55:38 Config A/D Result=40 14:55:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:38 Get A/D filter: -9.255963e+061 result=40 14:55:38 Get A/D value=-858993460 result=40 14:55:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:38 Parameters OK 14:55:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:38 Set A/D data flow result=40 14:55:38 Set A/D channel type result=40 14:55:38 Set A/D encoding result=40 14:55:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:38 Set channel filter=0.000000e+000 result=40 14:55:38 Config A/D Result=40 14:55:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:38 Get A/D filter: -9.255963e+061 result=40 14:55:38 Get A/D value=-858993460 result=40 14:55:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:38 Aux= 14:55:38 Message to Camera, serial 278110 queued [UTC 2018-12-19 14:55:52] 14:56:15 Received message from Master: op=PointingHead serial=278123 14:56:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:56:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:56:15 Point started: ret=0 14:56:15 point_skyscan result=0 14:56:16 Check angles 14:56:16 SkyScan query 14:56:17 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.705<-13447 Statuses=0009 0009 14:56:17 Msec=0 True Az=152.97 Ze=-21.705 Az status=0009 Ze status=0009 14:56:17 Check angles 14:56:17 SkyScan query 14:56:17 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.705<-12047 Statuses=0009 0009 14:56:17 Msec=750 True Az=135.435 Ze=-0.705 Az status=0009 Ze status=0009 14:56:18 Check angles 14:56:18 SkyScan query 14:56:18 SkyScan query done: ret=0 az=117.885<-7859 ze=20.205<-10653 Statuses=0009 0009 14:56:18 Msec=1500 True Az=117.885 Ze=20.205 Az status=0009 Ze status=0009 14:56:18 Check angles 14:56:18 SkyScan query 14:56:19 SkyScan query done: ret=0 az=100.545<-6703 ze=41.22<-9252 Statuses=0009 0009 14:56:19 Msec=2250 True Az=100.545 Ze=41.22 Az status=0009 Ze status=0009 14:56:19 Check angles 14:56:19 SkyScan query 14:56:20 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 14:56:20 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 14:56:20 Check angles 14:56:20 SkyScan query 14:56:20 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 14:56:20 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 14:56:20 Message to Master queued w/err=0: serial=278123 error=0 14:56:25 Received message from Master: op=Filter serial=278124 14:56:25 Color wheel filter change from 0 to 0 14:56:25 FLIGetFilterPos err=0 currentPosition=0 14:56:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:25 Filter is already there-color wheel unchanged 14:56:26 Received message from Master: op=Shutter serial=278125 14:56:26 Shutter LASER close 14:56:26 Received message from Camera: op=State serial=278127 14:56:26 GetSingleValue result=40 Value=cccccccc 14:56:26 SkyScan query 14:56:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:56:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:26 Parameters OK 14:56:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:26 Set A/D data flow result=40 14:56:26 Set A/D channel type result=40 14:56:26 Set A/D encoding result=40 14:56:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:26 Set channel filter=0.000000e+000 result=40 14:56:26 Config A/D Result=40 14:56:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:26 Get A/D filter: -9.255963e+061 result=40 14:56:26 Get A/D value=-858993460 result=40 14:56:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:26 Parameters OK 14:56:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:26 Set A/D data flow result=40 14:56:26 Set A/D channel type result=40 14:56:26 Set A/D encoding result=40 14:56:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:26 Set channel filter=0.000000e+000 result=40 14:56:26 Config A/D Result=40 14:56:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:26 Get A/D filter: -9.255963e+061 result=40 14:56:26 Get A/D value=-858993460 result=40 14:56:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:26 Aux= 14:56:26 Message to Camera, serial 278127 queued 14:57:03 Received message from Master: op=PointingHead serial=278140 14:57:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:57:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:57:03 Point started: ret=0 14:57:03 point_skyscan result=0 14:57:04 Check angles 14:57:04 SkyScan query 14:57:05 SkyScan query done: ret=0 az=108.945<-7263 ze=38.475<-9435 Statuses=0009 0008 14:57:05 Msec=0 True Az=108.945 Ze=38.475 Az status=0009 Ze status=0008 14:57:05 Check angles 14:57:05 SkyScan query 14:57:05 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 14:57:05 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 14:57:06 Check angles 14:57:06 SkyScan query 14:57:06 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 14:57:06 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 14:57:06 Check angles 14:57:06 SkyScan query 14:57:07 SkyScan query done: ret=0 az=161.67<-10778 ze=38.505<-9433 Statuses=0009 0008 14:57:07 Msec=2250 True Az=161.67 Ze=38.505 Az status=0009 Ze status=0008 14:57:07 Check angles 14:57:07 SkyScan query 14:57:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:57:08 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:57:08 Check angles 14:57:08 SkyScan query 14:57:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:57:08 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:57:08 Message to Master queued w/err=0: serial=278140 error=0 14:57:13 Received message from Master: op=Filter serial=278141 14:57:13 Color wheel filter change from 0 to 0 14:57:13 FLIGetFilterPos err=0 currentPosition=0 14:57:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:13 Filter is already there-color wheel unchanged 14:57:14 Received message from Master: op=Shutter serial=278142 14:57:14 Shutter LASER close 14:57:14 Received message from Camera: op=State serial=278144 14:57:14 GetSingleValue result=40 Value=cccccccc 14:57:14 SkyScan query 14:57:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:57:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:14 Parameters OK 14:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:14 Set A/D data flow result=40 14:57:14 Set A/D channel type result=40 14:57:14 Set A/D encoding result=40 14:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:14 Set channel filter=0.000000e+000 result=40 14:57:14 Config A/D Result=40 14:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:14 Get A/D filter: -9.255963e+061 result=40 14:57:14 Get A/D value=-858993460 result=40 14:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:14 Parameters OK 14:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:14 Set A/D data flow result=40 14:57:14 Set A/D channel type result=40 14:57:14 Set A/D encoding result=40 14:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:14 Set channel filter=0.000000e+000 result=40 14:57:14 Config A/D Result=40 14:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:14 Get A/D filter: -9.255963e+061 result=40 14:57:14 Get A/D value=-858993460 result=40 14:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:14 Aux= 14:57:14 Message to Camera, serial 278144 queued 14:57:51 Received message from Master: op=PointingHead serial=278157 14:57:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:57:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:57:51 Point started: ret=0 14:57:51 point_skyscan result=0 14:57:52 Check angles 14:57:52 SkyScan query 14:57:53 SkyScan query done: ret=0 az=153.12<-10208 ze=8.865<-11409 Statuses=0009 0009 14:57:53 Msec=0 True Az=153.12 Ze=8.865 Az status=0009 Ze status=0009 14:57:53 Check angles 14:57:53 SkyScan query 14:57:54 SkyScan query done: ret=0 az=135.255<-9017 ze=-12.525<-12835 Statuses=0009 0009 14:57:54 Msec=750 True Az=135.255 Ze=-12.525 Az status=0009 Ze status=0009 14:57:54 Check angles 14:57:54 SkyScan query 14:57:54 SkyScan query done: ret=0 az=117.375<-7825 ze=-34.035<-14269 Statuses=0009 0009 14:57:54 Msec=1500 True Az=117.375 Ze=-34.035 Az status=0009 Ze status=0009 14:57:54 Check angles 14:57:54 SkyScan query 14:57:55 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.585<-15439 Statuses=0009 0009 14:57:55 Msec=2250 True Az=100.02 Ze=-51.585 Az status=0009 Ze status=0009 14:57:55 Check angles 14:57:55 SkyScan query 14:57:56 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 14:57:56 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 14:57:56 Check angles 14:57:56 SkyScan query 14:57:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:57:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:57:57 Message to Master queued w/err=0: serial=278157 error=0 14:58:02 Received message from Master: op=Filter serial=278158 14:58:02 Color wheel filter change from 0 to 0 14:58:02 FLIGetFilterPos err=0 currentPosition=0 14:58:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:02 Filter is already there-color wheel unchanged 14:58:02 Received message from Master: op=Shutter serial=278159 14:58:02 Shutter LASER close 14:58:02 Received message from Camera: op=State serial=278161 14:58:02 GetSingleValue result=40 Value=cccccccc 14:58:02 SkyScan query 14:58:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:58:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:02 Parameters OK 14:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:02 Set A/D data flow result=40 14:58:02 Set A/D channel type result=40 14:58:02 Set A/D encoding result=40 14:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:02 Set channel filter=0.000000e+000 result=40 14:58:02 Config A/D Result=40 14:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:02 Get A/D filter: -9.255963e+061 result=40 14:58:02 Get A/D value=-858993460 result=40 14:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:02 Parameters OK 14:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:02 Set A/D data flow result=40 14:58:02 Set A/D channel type result=40 14:58:02 Set A/D encoding result=40 14:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:02 Set channel filter=0.000000e+000 result=40 14:58:02 Config A/D Result=40 14:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:02 Get A/D filter: -9.255963e+061 result=40 14:58:02 Get A/D value=-858993460 result=40 14:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:02 Aux= 14:58:02 Message to Camera, serial 278161 queued 14:58:39 Received message from Master: op=PointingHead serial=278174 14:58:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:58:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:58:40 Point started: ret=0 14:58:40 point_skyscan result=0 14:58:40 Check angles 14:58:40 SkyScan query 14:58:41 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.345<-17423 Statuses=0009 0009 14:58:41 Msec=0 True Az=109.17 Ze=-81.345 Az status=0009 Ze status=0009 14:58:41 Check angles 14:58:41 SkyScan query 14:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 14:58:42 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 14:58:42 Check angles 14:58:42 SkyScan query 14:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.27<-20218 Statuses=0008 0009 14:58:42 Msec=1500 True Az=112.995 Ze=-123.27 Az status=0008 Ze status=0009 14:58:43 Check angles 14:58:43 SkyScan query 14:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.225<-21615 Statuses=0008 0009 14:58:43 Msec=2250 True Az=112.995 Ze=-144.225 Az status=0008 Ze status=0009 14:58:43 Check angles 14:58:43 SkyScan query 14:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.165<-23011 Statuses=0008 0009 14:58:44 Msec=3000 True Az=112.995 Ze=-165.165 Az status=0008 Ze status=0009 14:58:44 Check angles 14:58:44 SkyScan query 14:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:58:45 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:58:45 Message to Master queued w/err=0: serial=278174 error=0 14:58:50 Received message from Master: op=Filter serial=278175 14:58:50 Color wheel filter change from 0 to 0 14:58:50 FLIGetFilterPos err=0 currentPosition=0 14:58:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:50 Filter is already there-color wheel unchanged 14:58:50 Received message from Master: op=Shutter serial=278176 14:58:50 Shutter LASER open 14:58:50 Received message from Camera: op=State serial=278178 14:58:50 GetSingleValue result=40 Value=cccccccc 14:58:50 SkyScan query 14:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:58:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:51 Parameters OK 14:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:51 Set A/D data flow result=40 14:58:51 Set A/D channel type result=40 14:58:51 Set A/D encoding result=40 14:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:51 Set channel filter=0.000000e+000 result=40 14:58:51 Config A/D Result=40 14:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:51 Get A/D filter: -9.255963e+061 result=40 14:58:51 Get A/D value=-858993460 result=40 14:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:51 Parameters OK 14:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:51 Set A/D data flow result=40 14:58:51 Set A/D channel type result=40 14:58:51 Set A/D encoding result=40 14:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:51 Set channel filter=0.000000e+000 result=40 14:58:51 Config A/D Result=40 14:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:51 Get A/D filter: -9.255963e+061 result=40 14:58:51 Get A/D value=-858993460 result=40 14:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:51 Aux= 14:58:51 Message to Camera, serial 278178 queued 14:58:59 Received message from Master: op=Shutter serial=278188 14:58:59 Shutter LASER close 14:58:59 Received message from Master: op=PointingHead serial=278192 14:58:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:58:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:59:00 Point started: ret=0 14:59:00 point_skyscan result=0 14:59:01 Check angles 14:59:01 SkyScan query 14:59:01 SkyScan query done: ret=0 az=89.67<-5978 ze=156.915<-1539 Statuses=0009 0009 14:59:01 Msec=0 True Az=89.67 Ze=156.915 Az status=0009 Ze status=0009 14:59:01 Check angles 14:59:01 SkyScan query 14:59:02 SkyScan query done: ret=0 az=72.12<-4808 ze=136.005<-2933 Statuses=0009 0009 14:59:02 Msec=750 True Az=72.12 Ze=136.005 Az status=0009 Ze status=0009 14:59:02 Check angles 14:59:02 SkyScan query 14:59:03 SkyScan query done: ret=0 az=54.735<-3649 ze=115.005<-4333 Statuses=0009 0009 14:59:03 Msec=1500 True Az=54.735 Ze=115.005 Az status=0009 Ze status=0009 14:59:03 Check angles 14:59:03 SkyScan query 14:59:03 SkyScan query done: ret=0 az=40.98<-2732 ze=94.08<-5728 Statuses=0009 0009 14:59:03 Msec=2250 True Az=40.98 Ze=94.08 Az status=0009 Ze status=0009 14:59:04 Check angles 14:59:04 SkyScan query 14:59:04 SkyScan query done: ret=0 az=40.995<-2733 ze=73.05<-7130 Statuses=0008 0009 14:59:04 Msec=3000 True Az=40.995 Ze=73.05 Az status=0008 Ze status=0009 14:59:04 Check angles 14:59:04 SkyScan query 14:59:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 14:59:05 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 14:59:05 Check angles 14:59:05 SkyScan query 14:59:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:59:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:59:06 Message to Master queued w/err=0: serial=278192 error=0 14:59:11 Received message from Master: op=Filter serial=278193 14:59:11 Color wheel filter change from 0 to 0 14:59:11 FLIGetFilterPos err=0 currentPosition=0 14:59:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:11 Filter is already there-color wheel unchanged 14:59:11 Received message from Master: op=Shutter serial=278194 14:59:11 Shutter LASER close 14:59:11 Received message from Camera: op=State serial=278196 14:59:11 GetSingleValue result=40 Value=cccccccc 14:59:11 SkyScan query 14:59:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:59:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:12 Parameters OK 14:59:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:12 Set A/D data flow result=40 14:59:12 Set A/D channel type result=40 14:59:12 Set A/D encoding result=40 14:59:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:12 Set channel filter=0.000000e+000 result=40 14:59:12 Config A/D Result=40 14:59:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:12 Get A/D filter: -9.255963e+061 result=40 14:59:12 Get A/D value=-858993460 result=40 14:59:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:12 Parameters OK 14:59:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:12 Set A/D data flow result=40 14:59:12 Set A/D channel type result=40 14:59:12 Set A/D encoding result=40 14:59:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:12 Set channel filter=0.000000e+000 result=40 14:59:12 Config A/D Result=40 14:59:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:12 Get A/D filter: -9.255963e+061 result=40 14:59:12 Get A/D value=-858993460 result=40 14:59:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:12 Aux= 14:59:12 Message to Camera, serial 278196 queued 14:59:48 Received message from Master: op=PointingHead serial=278209 14:59:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:59:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:59:49 Point started: ret=0 14:59:49 point_skyscan result=0 14:59:50 Check angles 14:59:50 SkyScan query 14:59:50 SkyScan query done: ret=0 az=63.915<-4261 ze=66.555<-7563 Statuses=0009 0008 14:59:50 Msec=0 True Az=63.915 Ze=66.555 Az status=0009 Ze status=0008 14:59:50 Check angles 14:59:50 SkyScan query 14:59:51 SkyScan query done: ret=0 az=81.36<-5424 ze=66.495<-7567 Statuses=0009 0008 14:59:51 Msec=750 True Az=81.36 Ze=66.495 Az status=0009 Ze status=0008 14:59:51 Check angles 14:59:51 SkyScan query 14:59:52 SkyScan query done: ret=0 az=98.82<-6588 ze=66.495<-7567 Statuses=0009 0008 14:59:52 Msec=1500 True Az=98.82 Ze=66.495 Az status=0009 Ze status=0008 14:59:52 Check angles 14:59:52 SkyScan query 14:59:52 SkyScan query done: ret=0 az=116.265<-7751 ze=66.495<-7567 Statuses=0009 0008 14:59:52 Msec=2250 True Az=116.265 Ze=66.495 Az status=0009 Ze status=0008 14:59:53 Check angles 14:59:53 SkyScan query 14:59:53 SkyScan query done: ret=0 az=133.755<-8917 ze=66.495<-7567 Statuses=0009 0008 14:59:53 Msec=3000 True Az=133.755 Ze=66.495 Az status=0009 Ze status=0008 14:59:53 Check angles 14:59:53 SkyScan query 14:59:54 SkyScan query done: ret=0 az=151.185<-10079 ze=66.495<-7567 Statuses=0009 0008 14:59:54 Msec=3750 True Az=151.185 Ze=66.495 Az status=0009 Ze status=0008 14:59:54 Check angles 14:59:54 SkyScan query 14:59:55 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:59:55 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:59:55 Message to Master queued w/err=0: serial=278209 error=0 15:00:00 Received message from Master: op=Filter serial=278210 15:00:00 Color wheel filter change from 0 to 0 15:00:00 FLIGetFilterPos err=0 currentPosition=0 15:00:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:00 Filter is already there-color wheel unchanged 15:00:00 Received message from Master: op=Shutter serial=278211 15:00:00 Shutter LASER close 15:00:00 Received message from Camera: op=State serial=278213 15:00:00 GetSingleValue result=40 Value=cccccccc 15:00:00 SkyScan query 15:00:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:00:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:00 Parameters OK 15:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:00 Set A/D data flow result=40 15:00:00 Set A/D channel type result=40 15:00:00 Set A/D encoding result=40 15:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:00 Set channel filter=0.000000e+000 result=40 15:00:00 Config A/D Result=40 15:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:00 Get A/D filter: -9.255963e+061 result=40 15:00:00 Get A/D value=-858993460 result=40 15:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:00 Parameters OK 15:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:00 Set A/D data flow result=40 15:00:00 Set A/D channel type result=40 15:00:00 Set A/D encoding result=40 15:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:00 Set channel filter=0.000000e+000 result=40 15:00:00 Config A/D Result=40 15:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:00 Get A/D filter: -9.255963e+061 result=40 15:00:00 Get A/D value=-858993460 result=40 15:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:00 Aux= 15:00:00 Message to Camera, serial 278213 queued 15:00:37 Received message from Master: op=PointingHead serial=278226 15:00:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:00:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:00:38 Point started: ret=0 15:00:38 point_skyscan result=0 15:00:38 Check angles 15:00:38 SkyScan query 15:00:39 SkyScan query done: ret=0 az=134.985<-8999 ze=36.72<-9552 Statuses=0009 0009 15:00:39 Msec=0 True Az=134.985 Ze=36.72 Az status=0009 Ze status=0009 15:00:39 Check angles 15:00:39 SkyScan query 15:00:40 SkyScan query done: ret=0 az=117.555<-7837 ze=15.78<-10948 Statuses=0009 0009 15:00:40 Msec=750 True Az=117.555 Ze=15.78 Az status=0009 Ze status=0009 15:00:40 Check angles 15:00:40 SkyScan query 15:00:40 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.625<-12375 Statuses=0009 0009 15:00:40 Msec=1500 True Az=99.825 Ze=-5.625 Az status=0009 Ze status=0009 15:00:41 Check angles 15:00:41 SkyScan query 15:00:41 SkyScan query done: ret=0 az=81.855<-5457 ze=-27.165<-13811 Statuses=0009 0009 15:00:41 Msec=2250 True Az=81.855 Ze=-27.165 Az status=0009 Ze status=0009 15:00:41 Check angles 15:00:41 SkyScan query 15:00:42 SkyScan query done: ret=0 az=64.41<-4294 ze=-38.58<-14572 Statuses=0009 0008 15:00:42 Msec=3000 True Az=64.41 Ze=-38.58 Az status=0009 Ze status=0008 15:00:42 Check angles 15:00:42 SkyScan query 15:00:43 SkyScan query done: ret=0 az=46.935<-3129 ze=-38.52<-14568 Statuses=0009 0008 15:00:43 Msec=3750 True Az=46.935 Ze=-38.52 Az status=0009 Ze status=0008 15:00:43 Check angles 15:00:43 SkyScan query 15:00:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:00:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:00:43 Message to Master queued w/err=0: serial=278226 error=0 15:00:48 Received message from Master: op=Filter serial=278227 15:00:48 Color wheel filter change from 0 to 0 15:00:48 FLIGetFilterPos err=0 currentPosition=0 15:00:48 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:48 Filter is already there-color wheel unchanged 15:00:49 Received message from Master: op=Shutter serial=278228 15:00:49 Shutter LASER close 15:00:49 Received message from Camera: op=State serial=278230 15:00:49 GetSingleValue result=40 Value=cccccccc 15:00:49 SkyScan query 15:00:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:00:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:49 Parameters OK 15:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:49 Set A/D data flow result=40 15:00:49 Set A/D channel type result=40 15:00:49 Set A/D encoding result=40 15:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:49 Set channel filter=0.000000e+000 result=40 15:00:49 Config A/D Result=40 15:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:49 Get A/D filter: -9.255963e+061 result=40 15:00:49 Get A/D value=-858993460 result=40 15:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:49 Parameters OK 15:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:49 Set A/D data flow result=40 15:00:49 Set A/D channel type result=40 15:00:49 Set A/D encoding result=40 15:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:49 Set channel filter=0.000000e+000 result=40 15:00:49 Config A/D Result=40 15:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:49 Get A/D filter: -9.255963e+061 result=40 15:00:49 Get A/D value=-858993460 result=40 15:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:49 Aux= 15:00:49 Message to Camera, serial 278230 queued 15:01:26 Received message from Master: op=PointingHead serial=278243 15:01:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:01:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:01:26 Point started: ret=0 15:01:26 point_skyscan result=0 15:01:27 Check angles 15:01:27 SkyScan query 15:01:28 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.34<-16556 Statuses=0009 0009 15:01:28 Msec=0 True Az=63.975 Ze=-68.34 Az status=0009 Ze status=0009 15:01:28 Check angles 15:01:28 SkyScan query 15:01:29 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.34<-17956 Statuses=0009 0009 15:01:29 Msec=750 True Az=81.375 Ze=-89.34 Az status=0009 Ze status=0009 15:01:29 Check angles 15:01:29 SkyScan query 15:01:29 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.235<-19349 Statuses=0009 0009 15:01:29 Msec=1500 True Az=98.895 Ze=-110.235 Az status=0009 Ze status=0009 15:01:29 Check angles 15:01:29 SkyScan query 15:01:30 SkyScan query done: ret=0 az=116.325<-7755 ze=-131.175<-20745 Statuses=0009 0009 15:01:30 Msec=2250 True Az=116.325 Ze=-131.175 Az status=0009 Ze status=0009 15:01:30 Check angles 15:01:30 SkyScan query 15:01:31 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 15:01:31 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 15:01:31 Check angles 15:01:31 SkyScan query 15:01:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 15:01:32 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 15:01:32 Message to Master queued w/err=0: serial=278243 error=0 15:01:37 Received message from Master: op=Filter serial=278244 15:01:37 Color wheel filter change from 0 to 0 15:01:37 FLIGetFilterPos err=0 currentPosition=0 15:01:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:37 Filter is already there-color wheel unchanged 15:01:37 Received message from Master: op=Shutter serial=278245 15:01:37 Shutter LASER close 15:01:37 Received message from Camera: op=State serial=278247 15:01:37 GetSingleValue result=40 Value=cccccccc 15:01:37 SkyScan query 15:01:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:01:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:37 Parameters OK 15:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:37 Set A/D data flow result=40 15:01:37 Set A/D channel type result=40 15:01:37 Set A/D encoding result=40 15:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:37 Set channel filter=0.000000e+000 result=40 15:01:37 Config A/D Result=40 15:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:37 Get A/D filter: -9.255963e+061 result=40 15:01:37 Get A/D value=-858993460 result=40 15:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:37 Parameters OK 15:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:37 Set A/D data flow result=40 15:01:37 Set A/D channel type result=40 15:01:37 Set A/D encoding result=40 15:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:37 Set channel filter=0.000000e+000 result=40 15:01:37 Config A/D Result=40 15:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:37 Get A/D filter: -9.255963e+061 result=40 15:01:37 Get A/D value=-858993460 result=40 15:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:37 Aux= 15:01:37 Message to Camera, serial 278247 queued 15:02:14 Received message from Master: op=PointingHead serial=278260 15:02:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:02:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:02:14 Point started: ret=0 15:02:14 point_skyscan result=0 15:02:15 Check angles 15:02:15 SkyScan query 15:02:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 15:02:16 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 15:02:16 Check angles 15:02:16 SkyScan query 15:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:02:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:02:17 Message to Master queued w/err=0: serial=278260 error=0 15:02:22 Received message from Master: op=Filter serial=278261 15:02:22 Color wheel filter change from 0 to 0 15:02:22 FLIGetFilterPos err=0 currentPosition=0 15:02:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:22 Filter is already there-color wheel unchanged 15:02:22 Received message from Master: op=Shutter serial=278262 15:02:22 Shutter LASER open 15:02:22 Received message from Camera: op=State serial=278264 15:02:22 GetSingleValue result=40 Value=cccccccc 15:02:22 SkyScan query 15:02:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:02:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:23 Parameters OK 15:02:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:23 Set A/D data flow result=40 15:02:23 Set A/D channel type result=40 15:02:23 Set A/D encoding result=40 15:02:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:23 Set channel filter=0.000000e+000 result=40 15:02:23 Config A/D Result=40 15:02:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:23 Get A/D filter: -9.255963e+061 result=40 15:02:23 Get A/D value=-858993460 result=40 15:02:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:23 Parameters OK 15:02:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:23 Set A/D data flow result=40 15:02:23 Set A/D channel type result=40 15:02:23 Set A/D encoding result=40 15:02:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:23 Set channel filter=0.000000e+000 result=40 15:02:23 Config A/D Result=40 15:02:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:23 Get A/D filter: -9.255963e+061 result=40 15:02:23 Get A/D value=-858993460 result=40 15:02:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:23 Aux= 15:02:23 Message to Camera, serial 278264 queued 15:02:31 Received message from Master: op=Shutter serial=278274 15:02:31 Shutter LASER close 15:02:32 Received message from Master: op=PointingHead serial=278278 15:02:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:02:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:02:32 Point started: ret=0 15:02:32 point_skyscan result=0 15:02:33 Check angles 15:02:33 SkyScan query 15:02:33 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.175<-21545 Statuses=0009 0009 15:02:33 Msec=0 True Az=136.095 Ze=-143.175 Az status=0009 Ze status=0009 15:02:33 Check angles 15:02:33 SkyScan query 15:02:34 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.235<-20149 Statuses=0009 0009 15:02:34 Msec=750 True Az=153.495 Ze=-122.235 Az status=0009 Ze status=0009 15:02:34 Check angles 15:02:34 SkyScan query 15:02:35 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.77<-18718 Statuses=0009 0009 15:02:35 Msec=1500 True Az=171.36 Ze=-100.77 Az status=0009 Ze status=0009 15:02:35 Check angles 15:02:35 SkyScan query 15:02:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.395<-17293 Statuses=0008 0009 15:02:35 Msec=2250 True Az=176.01 Ze=-79.395 Az status=0008 Ze status=0009 15:02:36 Check angles 15:02:36 SkyScan query 15:02:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.395<-15893 Statuses=0008 0009 15:02:36 Msec=3000 True Az=176.01 Ze=-58.395 Az status=0008 Ze status=0009 15:02:36 Check angles 15:02:36 SkyScan query 15:02:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:02:37 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:02:37 Message to Master queued w/err=0: serial=278278 error=0 15:02:42 Received message from Master: op=Filter serial=278279 15:02:42 Color wheel filter change from 0 to 0 15:02:42 FLIGetFilterPos err=0 currentPosition=0 15:02:42 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:42 Filter is already there-color wheel unchanged 15:02:42 Received message from Master: op=Shutter serial=278280 15:02:42 Shutter LASER close 15:02:42 Received message from Camera: op=State serial=278282 15:02:42 GetSingleValue result=40 Value=cccccccc 15:02:42 SkyScan query 15:02:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:02:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:43 Parameters OK 15:02:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:43 Set A/D data flow result=40 15:02:43 Set A/D channel type result=40 15:02:43 Set A/D encoding result=40 15:02:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:43 Set channel filter=0.000000e+000 result=40 15:02:43 Config A/D Result=40 15:02:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:43 Get A/D filter: -9.255963e+061 result=40 15:02:43 Get A/D value=-858993460 result=40 15:02:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:43 Parameters OK 15:02:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:43 Set A/D data flow result=40 15:02:43 Set A/D channel type result=40 15:02:43 Set A/D encoding result=40 15:02:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:43 Set channel filter=0.000000e+000 result=40 15:02:43 Config A/D Result=40 15:02:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:43 Get A/D filter: -9.255963e+061 result=40 15:02:43 Get A/D value=-858993460 result=40 15:02:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:43 Aux= 15:02:43 Message to Camera, serial 278282 queued 15:03:20 Received message from Master: op=PointingHead serial=278295 15:03:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:03:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:03:20 Point started: ret=0 15:03:20 point_skyscan result=0 15:03:21 Check angles 15:03:21 SkyScan query 15:03:21 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.885<-13459 Statuses=0009 0009 15:03:21 Msec=0 True Az=152.97 Ze=-21.885 Az status=0009 Ze status=0009 15:03:22 Check angles 15:03:22 SkyScan query 15:03:22 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.78<-12052 Statuses=0009 0009 15:03:22 Msec=750 True Az=135.405 Ze=-0.78 Az status=0009 Ze status=0009 15:03:22 Check angles 15:03:22 SkyScan query 15:03:23 SkyScan query done: ret=0 az=117.675<-7845 ze=20.52<-10632 Statuses=0009 0009 15:03:23 Msec=1500 True Az=117.675 Ze=20.52 Az status=0009 Ze status=0009 15:03:23 Check angles 15:03:23 SkyScan query 15:03:24 SkyScan query done: ret=0 az=99.84<-6656 ze=41.865<-9209 Statuses=0009 0009 15:03:24 Msec=2250 True Az=99.84 Ze=41.865 Az status=0009 Ze status=0009 15:03:24 Check angles 15:03:24 SkyScan query 15:03:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 15:03:24 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 15:03:25 Check angles 15:03:25 SkyScan query 15:03:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:03:25 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 15:03:25 Message to Master queued w/err=0: serial=278295 error=0 15:03:30 Received message from Master: op=Filter serial=278296 15:03:30 Color wheel filter change from 0 to 0 15:03:30 FLIGetFilterPos err=0 currentPosition=0 15:03:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:30 Filter is already there-color wheel unchanged 15:03:30 Received message from Master: op=Shutter serial=278297 15:03:30 Shutter LASER close 15:03:30 Received message from Camera: op=State serial=278299 15:03:30 GetSingleValue result=40 Value=cccccccc 15:03:30 SkyScan query 15:03:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:03:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:31 Parameters OK 15:03:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:31 Set A/D data flow result=40 15:03:31 Set A/D channel type result=40 15:03:31 Set A/D encoding result=40 15:03:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:31 Set channel filter=0.000000e+000 result=40 15:03:31 Config A/D Result=40 15:03:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:31 Get A/D filter: -9.255963e+061 result=40 15:03:31 Get A/D value=-858993460 result=40 15:03:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:31 Parameters OK 15:03:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:31 Set A/D data flow result=40 15:03:31 Set A/D channel type result=40 15:03:31 Set A/D encoding result=40 15:03:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:31 Set channel filter=0.000000e+000 result=40 15:03:31 Config A/D Result=40 15:03:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:31 Get A/D filter: -9.255963e+061 result=40 15:03:31 Get A/D value=-858993460 result=40 15:03:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:31 Aux= 15:03:31 Message to Camera, serial 278299 queued 15:04:07 Received message from Master: op=PointingHead serial=278311 15:04:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:04:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:04:07 Point started: ret=0 15:04:07 point_skyscan result=0 15:04:08 Check angles 15:04:08 SkyScan query 15:04:09 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 15:04:09 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 15:04:09 Check angles 15:04:09 SkyScan query 15:04:09 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 15:04:09 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 15:04:09 Check angles 15:04:09 SkyScan query 15:04:10 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 15:04:10 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 15:04:10 Check angles 15:04:10 SkyScan query 15:04:11 SkyScan query done: ret=0 az=161.745<-10783 ze=38.505<-9433 Statuses=0009 0008 15:04:11 Msec=2250 True Az=161.745 Ze=38.505 Az status=0009 Ze status=0008 15:04:11 Check angles 15:04:11 SkyScan query 15:04:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:04:12 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:04:12 Check angles 15:04:12 SkyScan query 15:04:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:04:12 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:04:12 Message to Master queued w/err=0: serial=278311 error=0 15:04:17 Received message from Master: op=Filter serial=278312 15:04:17 Color wheel filter change from 0 to 0 15:04:17 FLIGetFilterPos err=0 currentPosition=0 15:04:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:17 Filter is already there-color wheel unchanged 15:04:18 Received message from Master: op=Shutter serial=278313 15:04:18 Shutter LASER close 15:04:18 Received message from Camera: op=State serial=278315 15:04:18 GetSingleValue result=40 Value=cccccccc 15:04:18 SkyScan query 15:04:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:04:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:18 Parameters OK 15:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:18 Set A/D data flow result=40 15:04:18 Set A/D channel type result=40 15:04:18 Set A/D encoding result=40 15:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:18 Set channel filter=0.000000e+000 result=40 15:04:18 Config A/D Result=40 15:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:18 Get A/D filter: -9.255963e+061 result=40 15:04:18 Get A/D value=-858993460 result=40 15:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:18 Parameters OK 15:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:18 Set A/D data flow result=40 15:04:18 Set A/D channel type result=40 15:04:18 Set A/D encoding result=40 15:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:18 Set channel filter=0.000000e+000 result=40 15:04:18 Config A/D Result=40 15:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:18 Get A/D filter: -9.255963e+061 result=40 15:04:18 Get A/D value=-858993460 result=40 15:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:18 Aux= 15:04:18 Message to Camera, serial 278315 queued 15:04:54 Received message from Master: op=PointingHead serial=278327 15:04:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:04:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:04:54 Point started: ret=0 15:04:54 point_skyscan result=0 15:04:55 Check angles 15:04:55 SkyScan query 15:04:56 SkyScan query done: ret=0 az=152.925<-10195 ze=8.73<-11418 Statuses=0009 0009 15:04:56 Msec=0 True Az=152.925 Ze=8.73 Az status=0009 Ze status=0009 15:04:56 Check angles 15:04:56 SkyScan query 15:04:57 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.66<-12844 Statuses=0009 0009 15:04:57 Msec=750 True Az=135.135 Ze=-12.66 Az status=0009 Ze status=0009 15:04:57 Check angles 15:04:57 SkyScan query 15:04:57 SkyScan query done: ret=0 az=117.645<-7843 ze=-33.705<-14247 Statuses=0009 0009 15:04:57 Msec=1500 True Az=117.645 Ze=-33.705 Az status=0009 Ze status=0009 15:04:57 Check angles 15:04:57 SkyScan query 15:04:58 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.57<-15438 Statuses=0009 0009 15:04:58 Msec=2250 True Az=100.29 Ze=-51.57 Az status=0009 Ze status=0009 15:04:58 Check angles 15:04:58 SkyScan query 15:04:59 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:04:59 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:04:59 Check angles 15:04:59 SkyScan query 15:05:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:05:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:05:00 Message to Master queued w/err=0: serial=278327 error=0 15:05:05 Received message from Master: op=Filter serial=278328 15:05:05 Color wheel filter change from 0 to 0 15:05:05 FLIGetFilterPos err=0 currentPosition=0 15:05:05 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:05 Filter is already there-color wheel unchanged 15:05:05 Received message from Master: op=Shutter serial=278329 15:05:05 Shutter LASER close 15:05:05 Received message from Camera: op=State serial=278331 15:05:05 GetSingleValue result=40 Value=cccccccc 15:05:05 SkyScan query 15:05:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:05:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:05 Parameters OK 15:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:05 Set A/D data flow result=40 15:05:05 Set A/D channel type result=40 15:05:05 Set A/D encoding result=40 15:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:05 Set channel filter=0.000000e+000 result=40 15:05:05 Config A/D Result=40 15:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:05 Get A/D filter: -9.255963e+061 result=40 15:05:05 Get A/D value=-858993460 result=40 15:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:05 Parameters OK 15:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:05 Set A/D data flow result=40 15:05:05 Set A/D channel type result=40 15:05:05 Set A/D encoding result=40 15:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:05 Set channel filter=0.000000e+000 result=40 15:05:05 Config A/D Result=40 15:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:05 Get A/D filter: -9.255963e+061 result=40 15:05:05 Get A/D value=-858993460 result=40 15:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:05 Aux= 15:05:05 Message to Camera, serial 278331 queued 15:05:42 Received message from Master: op=PointingHead serial=278344 15:05:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:05:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:05:42 Point started: ret=0 15:05:42 point_skyscan result=0 15:05:43 Check angles 15:05:43 SkyScan query 15:05:44 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.135<-17409 Statuses=0009 0009 15:05:44 Msec=0 True Az=108.915 Ze=-81.135 Az status=0009 Ze status=0009 15:05:44 Check angles 15:05:44 SkyScan query 15:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 15:05:45 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 15:05:45 Check angles 15:05:45 SkyScan query 15:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.045<-20203 Statuses=0008 0009 15:05:45 Msec=1500 True Az=112.995 Ze=-123.045 Az status=0008 Ze status=0009 15:05:45 Check angles 15:05:45 SkyScan query 15:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 15:05:46 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 15:05:46 Check angles 15:05:46 SkyScan query 15:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 15:05:47 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 15:05:47 Check angles 15:05:47 SkyScan query 15:05:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:05:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:05:48 Message to Master queued w/err=0: serial=278344 error=0 15:05:53 Received message from Master: op=Filter serial=278345 15:05:53 Color wheel filter change from 0 to 0 15:05:53 FLIGetFilterPos err=0 currentPosition=0 15:05:53 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:53 Filter is already there-color wheel unchanged 15:05:53 Received message from Master: op=Shutter serial=278346 15:05:53 Shutter LASER open 15:05:53 Received message from Camera: op=State serial=278348 15:05:53 GetSingleValue result=40 Value=cccccccc 15:05:53 SkyScan query 15:05:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:05:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:54 Parameters OK 15:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:54 Set A/D data flow result=40 15:05:54 Set A/D channel type result=40 15:05:54 Set A/D encoding result=40 15:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:54 Set channel filter=0.000000e+000 result=40 15:05:54 Config A/D Result=40 15:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:54 Get A/D filter: -9.255963e+061 result=40 15:05:54 Get A/D value=-858993460 result=40 15:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:54 Parameters OK 15:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:54 Set A/D data flow result=40 15:05:54 Set A/D channel type result=40 15:05:54 Set A/D encoding result=40 15:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:54 Set channel filter=0.000000e+000 result=40 15:05:54 Config A/D Result=40 15:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:54 Get A/D filter: -9.255963e+061 result=40 15:05:54 Get A/D value=-858993460 result=40 15:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:54 Aux= 15:05:54 Message to Camera, serial 278348 queued 15:06:02 Received message from Master: op=Shutter serial=278358 15:06:02 Shutter LASER close 15:06:02 Received message from Master: op=PointingHead serial=278362 15:06:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:06:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-19 15:06:03] 15:06:03 Point started: ret=0 15:06:03 point_skyscan result=0 15:06:04 Check angles 15:06:04 SkyScan query 15:06:04 SkyScan query done: ret=0 az=88.095<-5873 ze=154.995<-1667 Statuses=0009 0009 15:06:04 Msec=0 True Az=88.095 Ze=154.995 Az status=0009 Ze status=0009 15:06:04 Check angles 15:06:04 SkyScan query 15:06:05 SkyScan query done: ret=0 az=70.2<-4680 ze=133.59<-3094 Statuses=0009 0009 15:06:05 Msec=750 True Az=70.2 Ze=133.59 Az status=0009 Ze status=0009 15:06:05 Check angles 15:06:05 SkyScan query 15:06:06 SkyScan query done: ret=0 az=52.695<-3513 ze=112.575<-4495 Statuses=0009 0009 15:06:06 Msec=1500 True Az=52.695 Ze=112.575 Az status=0009 Ze status=0009 15:06:06 Check angles 15:06:06 SkyScan query 15:06:06 SkyScan query done: ret=0 az=40.995<-2733 ze=91.68<-5888 Statuses=0008 0009 15:06:06 Msec=2250 True Az=40.995 Ze=91.68 Az status=0008 Ze status=0009 15:06:07 Check angles 15:06:07 SkyScan query 15:06:07 SkyScan query done: ret=0 az=40.995<-2733 ze=70.245<-7317 Statuses=0008 0009 15:06:07 Msec=3000 True Az=40.995 Ze=70.245 Az status=0008 Ze status=0009 15:06:07 Check angles 15:06:07 SkyScan query 15:06:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.525<-8565 Statuses=0008 0009 15:06:08 Msec=3750 True Az=40.995 Ze=51.525 Az status=0008 Ze status=0009 15:06:08 Check angles 15:06:08 SkyScan query 15:06:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:06:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:06:09 Message to Master queued w/err=0: serial=278362 error=0 15:06:14 Received message from Master: op=Filter serial=278363 15:06:14 Color wheel filter change from 0 to 0 15:06:14 FLIGetFilterPos err=0 currentPosition=0 15:06:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:14 Filter is already there-color wheel unchanged 15:06:14 Received message from Master: op=Shutter serial=278364 15:06:14 Shutter LASER close 15:06:14 Received message from Camera: op=State serial=278366 15:06:14 GetSingleValue result=40 Value=cccccccc 15:06:14 SkyScan query 15:06:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:06:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:15 Parameters OK 15:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:15 Set A/D data flow result=40 15:06:15 Set A/D channel type result=40 15:06:15 Set A/D encoding result=40 15:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:15 Set channel filter=0.000000e+000 result=40 15:06:15 Config A/D Result=40 15:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:15 Get A/D filter: -9.255963e+061 result=40 15:06:15 Get A/D value=-858993460 result=40 15:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:15 Parameters OK 15:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:15 Set A/D data flow result=40 15:06:15 Set A/D channel type result=40 15:06:15 Set A/D encoding result=40 15:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:15 Set channel filter=0.000000e+000 result=40 15:06:15 Config A/D Result=40 15:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:15 Get A/D filter: -9.255963e+061 result=40 15:06:15 Get A/D value=-858993460 result=40 15:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:15 Aux= 15:06:15 Message to Camera, serial 278366 queued 15:06:51 Received message from Master: op=PointingHead serial=278379 15:06:51 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:06:51 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:06:52 Point started: ret=0 15:06:52 point_skyscan result=0 15:06:52 Check angles 15:06:52 SkyScan query 15:06:53 SkyScan query done: ret=0 az=64.2<-4280 ze=66.54<-7564 Statuses=0009 0008 15:06:53 Msec=0 True Az=64.2 Ze=66.54 Az status=0009 Ze status=0008 15:06:53 Check angles 15:06:53 SkyScan query 15:06:54 SkyScan query done: ret=0 az=81.63<-5442 ze=66.51<-7566 Statuses=0009 0008 15:06:54 Msec=750 True Az=81.63 Ze=66.51 Az status=0009 Ze status=0008 15:06:54 Check angles 15:06:54 SkyScan query 15:06:55 SkyScan query done: ret=0 az=99.165<-6611 ze=66.495<-7567 Statuses=0009 0008 15:06:55 Msec=1500 True Az=99.165 Ze=66.495 Az status=0009 Ze status=0008 15:06:55 Check angles 15:06:55 SkyScan query 15:06:55 SkyScan query done: ret=0 az=116.655<-7777 ze=66.495<-7567 Statuses=0009 0008 15:06:55 Msec=2250 True Az=116.655 Ze=66.495 Az status=0009 Ze status=0008 15:06:55 Check angles 15:06:55 SkyScan query 15:06:56 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 15:06:56 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 15:06:56 Check angles 15:06:56 SkyScan query 15:06:57 SkyScan query done: ret=0 az=151.89<-10126 ze=66.495<-7567 Statuses=0009 0008 15:06:57 Msec=3750 True Az=151.89 Ze=66.495 Az status=0009 Ze status=0008 15:06:57 Check angles 15:06:57 SkyScan query 15:06:58 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:06:58 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:06:58 Message to Master queued w/err=0: serial=278379 error=0 15:07:03 Received message from Master: op=Filter serial=278380 15:07:03 Color wheel filter change from 0 to 0 15:07:03 FLIGetFilterPos err=0 currentPosition=0 15:07:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:03 Filter is already there-color wheel unchanged 15:07:03 Received message from Master: op=Shutter serial=278381 15:07:03 Shutter LASER close 15:07:03 Received message from Camera: op=State serial=278383 15:07:03 GetSingleValue result=40 Value=cccccccc 15:07:03 SkyScan query 15:07:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:07:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:03 Parameters OK 15:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:03 Set A/D data flow result=40 15:07:03 Set A/D channel type result=40 15:07:03 Set A/D encoding result=40 15:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:03 Set channel filter=0.000000e+000 result=40 15:07:03 Config A/D Result=40 15:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:03 Get A/D filter: -9.255963e+061 result=40 15:07:03 Get A/D value=-858993460 result=40 15:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:03 Parameters OK 15:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:03 Set A/D data flow result=40 15:07:03 Set A/D channel type result=40 15:07:03 Set A/D encoding result=40 15:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:03 Set channel filter=0.000000e+000 result=40 15:07:03 Config A/D Result=40 15:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:03 Get A/D filter: -9.255963e+061 result=40 15:07:03 Get A/D value=-858993460 result=40 15:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:03 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:03 Aux= 15:07:03 Message to Camera, serial 278383 queued 15:07:40 Received message from Master: op=PointingHead serial=278396 15:07:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:07:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:07:41 Point started: ret=0 15:07:41 point_skyscan result=0 15:07:41 Check angles 15:07:41 SkyScan query 15:07:42 SkyScan query done: ret=0 az=135.195<-9013 ze=36.96<-9536 Statuses=0009 0009 15:07:42 Msec=0 True Az=135.195 Ze=36.96 Az status=0009 Ze status=0009 15:07:42 Check angles 15:07:42 SkyScan query 15:07:43 SkyScan query done: ret=0 az=117.705<-7847 ze=15.975<-10935 Statuses=0009 0009 15:07:43 Msec=750 True Az=117.705 Ze=15.975 Az status=0009 Ze status=0009 15:07:43 Check angles 15:07:43 SkyScan query 15:07:43 SkyScan query done: ret=0 az=99.99<-6666 ze=-5.355<-12357 Statuses=0009 0009 15:07:43 Msec=1500 True Az=99.99 Ze=-5.355 Az status=0009 Ze status=0009 15:07:44 Check angles 15:07:44 SkyScan query 15:07:44 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.31<-13754 Statuses=0009 0009 15:07:44 Msec=2250 True Az=82.485 Ze=-26.31 Az status=0009 Ze status=0009 15:07:44 Check angles 15:07:44 SkyScan query 15:07:45 SkyScan query done: ret=0 az=64.965<-4331 ze=-38.58<-14572 Statuses=0009 0008 15:07:45 Msec=3000 True Az=64.965 Ze=-38.58 Az status=0009 Ze status=0008 15:07:45 Check angles 15:07:45 SkyScan query 15:07:46 SkyScan query done: ret=0 az=47.46<-3164 ze=-38.52<-14568 Statuses=0009 0008 15:07:46 Msec=3750 True Az=47.46 Ze=-38.52 Az status=0009 Ze status=0008 15:07:46 Check angles 15:07:46 SkyScan query 15:07:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:07:46 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:07:46 Message to Master queued w/err=0: serial=278396 error=0 15:07:51 Received message from Master: op=Filter serial=278397 15:07:51 Color wheel filter change from 0 to 0 15:07:51 FLIGetFilterPos err=0 currentPosition=0 15:07:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:51 Filter is already there-color wheel unchanged 15:07:52 Received message from Master: op=Shutter serial=278398 15:07:52 Shutter LASER close 15:07:52 Received message from Camera: op=State serial=278400 15:07:52 GetSingleValue result=40 Value=cccccccc 15:07:52 SkyScan query 15:07:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:07:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:52 Parameters OK 15:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:52 Set A/D data flow result=40 15:07:52 Set A/D channel type result=40 15:07:52 Set A/D encoding result=40 15:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:52 Set channel filter=0.000000e+000 result=40 15:07:52 Config A/D Result=40 15:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:52 Get A/D filter: -9.255963e+061 result=40 15:07:52 Get A/D value=-858993460 result=40 15:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:52 Parameters OK 15:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:52 Set A/D data flow result=40 15:07:52 Set A/D channel type result=40 15:07:52 Set A/D encoding result=40 15:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:52 Set channel filter=0.000000e+000 result=40 15:07:52 Config A/D Result=40 15:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:52 Get A/D filter: -9.255963e+061 result=40 15:07:52 Get A/D value=-858993460 result=40 15:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:52 Aux= 15:07:52 Message to Camera, serial 278400 queued 15:08:29 Received message from Master: op=PointingHead serial=278413 15:08:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:08:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:08:29 Point started: ret=0 15:08:29 point_skyscan result=0 15:08:30 Check angles 15:08:30 SkyScan query 15:08:31 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.265<-16551 Statuses=0009 0009 15:08:31 Msec=0 True Az=64.005 Ze=-68.265 Az status=0009 Ze status=0009 15:08:31 Check angles 15:08:31 SkyScan query 15:08:31 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.235<-17949 Statuses=0009 0009 15:08:31 Msec=750 True Az=81.345 Ze=-89.235 Az status=0009 Ze status=0009 15:08:32 Check angles 15:08:32 SkyScan query 15:08:32 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.175<-19345 Statuses=0009 0009 15:08:32 Msec=1500 True Az=98.82 Ze=-110.175 Az status=0009 Ze status=0009 15:08:32 Check angles 15:08:32 SkyScan query 15:08:33 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.505<-20767 Statuses=0009 0009 15:08:33 Msec=2250 True Az=116.715 Ze=-131.505 Az status=0009 Ze status=0009 15:08:33 Check angles 15:08:33 SkyScan query 15:08:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 15:08:34 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 15:08:34 Check angles 15:08:34 SkyScan query 15:08:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 15:08:34 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 15:08:34 Message to Master queued w/err=0: serial=278413 error=0 15:08:39 Received message from Master: op=Filter serial=278414 15:08:39 Color wheel filter change from 0 to 0 15:08:39 FLIGetFilterPos err=0 currentPosition=0 15:08:39 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:39 Filter is already there-color wheel unchanged 15:08:40 Received message from Master: op=Shutter serial=278415 15:08:40 Shutter LASER close 15:08:40 Received message from Camera: op=State serial=278417 15:08:40 GetSingleValue result=40 Value=cccccccc 15:08:40 SkyScan query 15:08:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:08:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:40 Parameters OK 15:08:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:40 Set A/D data flow result=40 15:08:40 Set A/D channel type result=40 15:08:40 Set A/D encoding result=40 15:08:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:40 Set channel filter=0.000000e+000 result=40 15:08:40 Config A/D Result=40 15:08:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:40 Get A/D filter: -9.255963e+061 result=40 15:08:40 Get A/D value=-858993460 result=40 15:08:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:40 Parameters OK 15:08:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:40 Set A/D data flow result=40 15:08:40 Set A/D channel type result=40 15:08:40 Set A/D encoding result=40 15:08:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:40 Set channel filter=0.000000e+000 result=40 15:08:40 Config A/D Result=40 15:08:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:40 Get A/D filter: -9.255963e+061 result=40 15:08:40 Get A/D value=-858993460 result=40 15:08:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:40 Aux= 15:08:40 Message to Camera, serial 278417 queued 15:09:16 Received message from Master: op=PointingHead serial=278429 15:09:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:09:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:09:17 Point started: ret=0 15:09:17 point_skyscan result=0 15:09:17 Check angles 15:09:17 SkyScan query 15:09:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 15:09:18 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 15:09:18 Check angles 15:09:18 SkyScan query 15:09:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:09:19 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:09:19 Message to Master queued w/err=0: serial=278429 error=0 15:09:24 Received message from Master: op=Filter serial=278430 15:09:24 Color wheel filter change from 0 to 0 15:09:24 FLIGetFilterPos err=0 currentPosition=0 15:09:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:24 Filter is already there-color wheel unchanged 15:09:24 Received message from Master: op=Shutter serial=278431 15:09:24 Shutter LASER open 15:09:24 Received message from Camera: op=State serial=278433 15:09:24 GetSingleValue result=40 Value=cccccccc 15:09:24 SkyScan query 15:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:09:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:25 Parameters OK 15:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:25 Set A/D data flow result=40 15:09:25 Set A/D channel type result=40 15:09:25 Set A/D encoding result=40 15:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:25 Set channel filter=0.000000e+000 result=40 15:09:25 Config A/D Result=40 15:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:25 Get A/D filter: -9.255963e+061 result=40 15:09:25 Get A/D value=-858993460 result=40 15:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:25 Parameters OK 15:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:25 Set A/D data flow result=40 15:09:25 Set A/D channel type result=40 15:09:25 Set A/D encoding result=40 15:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:25 Set channel filter=0.000000e+000 result=40 15:09:25 Config A/D Result=40 15:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:25 Get A/D filter: -9.255963e+061 result=40 15:09:25 Get A/D value=-858993460 result=40 15:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:25 Aux= 15:09:25 Message to Camera, serial 278433 queued 15:09:33 Received message from Master: op=Shutter serial=278443 15:09:33 Shutter LASER close 15:09:34 Received message from Master: op=PointingHead serial=278447 15:09:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:09:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:09:34 Point started: ret=0 15:09:34 point_skyscan result=0 15:09:35 Check angles 15:09:35 SkyScan query 15:09:35 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.535<-21569 Statuses=0009 0009 15:09:35 Msec=0 True Az=135.72 Ze=-143.535 Az status=0009 Ze status=0009 15:09:35 Check angles 15:09:35 SkyScan query 15:09:36 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.535<-20169 Statuses=0009 0009 15:09:36 Msec=750 True Az=153.24 Ze=-122.535 Az status=0009 Ze status=0009 15:09:36 Check angles 15:09:36 SkyScan query 15:09:37 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.685<-18779 Statuses=0009 0009 15:09:37 Msec=1500 True Az=170.73 Ze=-101.685 Az status=0009 Ze status=0009 15:09:37 Check angles 15:09:37 SkyScan query 15:09:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.64<-17376 Statuses=0008 0009 15:09:37 Msec=2250 True Az=176.01 Ze=-80.64 Az status=0008 Ze status=0009 15:09:38 Check angles 15:09:38 SkyScan query 15:09:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.73<-15982 Statuses=0008 0009 15:09:38 Msec=3000 True Az=176.01 Ze=-59.73 Az status=0008 Ze status=0009 15:09:38 Check angles 15:09:38 SkyScan query 15:09:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:09:39 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:09:39 Message to Master queued w/err=0: serial=278447 error=0 15:09:44 Received message from Master: op=Filter serial=278448 15:09:44 Color wheel filter change from 0 to 0 15:09:44 FLIGetFilterPos err=0 currentPosition=0 15:09:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:44 Filter is already there-color wheel unchanged 15:09:44 Received message from Master: op=Shutter serial=278449 15:09:44 Shutter LASER close 15:09:44 Received message from Camera: op=State serial=278451 15:09:44 GetSingleValue result=40 Value=cccccccc 15:09:44 SkyScan query 15:09:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:09:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:45 Parameters OK 15:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:45 Set A/D data flow result=40 15:09:45 Set A/D channel type result=40 15:09:45 Set A/D encoding result=40 15:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:45 Set channel filter=0.000000e+000 result=40 15:09:45 Config A/D Result=40 15:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:45 Get A/D filter: -9.255963e+061 result=40 15:09:45 Get A/D value=-858993460 result=40 15:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:45 Parameters OK 15:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:45 Set A/D data flow result=40 15:09:45 Set A/D channel type result=40 15:09:45 Set A/D encoding result=40 15:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:45 Set channel filter=0.000000e+000 result=40 15:09:45 Config A/D Result=40 15:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:45 Get A/D filter: -9.255963e+061 result=40 15:09:45 Get A/D value=-858993460 result=40 15:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:45 Aux= 15:09:45 Message to Camera, serial 278451 queued 15:10:22 Received message from Master: op=PointingHead serial=278464 15:10:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:10:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:10:22 Point started: ret=0 15:10:22 point_skyscan result=0 15:10:23 Check angles 15:10:23 SkyScan query 15:10:23 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.945<-13463 Statuses=0009 0009 15:10:23 Msec=0 True Az=152.97 Ze=-21.945 Az status=0009 Ze status=0009 15:10:24 Check angles 15:10:24 SkyScan query 15:10:24 SkyScan query done: ret=0 az=135.555<-9037 ze=-0.915<-12061 Statuses=0009 0009 15:10:24 Msec=750 True Az=135.555 Ze=-0.915 Az status=0009 Ze status=0009 15:10:24 Check angles 15:10:24 SkyScan query 15:10:25 SkyScan query done: ret=0 az=118.065<-7871 ze=19.965<-10669 Statuses=0009 0009 15:10:25 Msec=1500 True Az=118.065 Ze=19.965 Az status=0009 Ze status=0009 15:10:25 Check angles 15:10:25 SkyScan query 15:10:26 SkyScan query done: ret=0 az=100.695<-6713 ze=40.995<-9267 Statuses=0009 0009 15:10:26 Msec=2250 True Az=100.695 Ze=40.995 Az status=0009 Ze status=0009 15:10:26 Check angles 15:10:26 SkyScan query 15:10:26 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 15:10:26 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 15:10:27 Check angles 15:10:27 SkyScan query 15:10:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:10:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:10:27 Message to Master queued w/err=0: serial=278464 error=0 15:10:32 Received message from Master: op=Filter serial=278465 15:10:32 Color wheel filter change from 0 to 0 15:10:32 FLIGetFilterPos err=0 currentPosition=0 15:10:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:32 Filter is already there-color wheel unchanged 15:10:32 Received message from Master: op=Shutter serial=278466 15:10:32 Shutter LASER close 15:10:32 Received message from Camera: op=State serial=278468 15:10:32 GetSingleValue result=40 Value=cccccccc 15:10:32 SkyScan query 15:10:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:10:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:33 Parameters OK 15:10:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:33 Set A/D data flow result=40 15:10:33 Set A/D channel type result=40 15:10:33 Set A/D encoding result=40 15:10:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:33 Set channel filter=0.000000e+000 result=40 15:10:33 Config A/D Result=40 15:10:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:33 Get A/D filter: -9.255963e+061 result=40 15:10:33 Get A/D value=-858993460 result=40 15:10:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:33 Parameters OK 15:10:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:33 Set A/D data flow result=40 15:10:33 Set A/D channel type result=40 15:10:33 Set A/D encoding result=40 15:10:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:33 Set channel filter=0.000000e+000 result=40 15:10:33 Config A/D Result=40 15:10:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:33 Get A/D filter: -9.255963e+061 result=40 15:10:33 Get A/D value=-858993460 result=40 15:10:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:33 Aux= 15:10:33 Message to Camera, serial 278468 queued 15:11:10 Received message from Master: op=PointingHead serial=278481 15:11:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:11:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:11:10 Point started: ret=0 15:11:10 point_skyscan result=0 15:11:11 Check angles 15:11:11 SkyScan query 15:11:11 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 15:11:11 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 15:11:12 Check angles 15:11:12 SkyScan query 15:11:12 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 15:11:12 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 15:11:12 Check angles 15:11:12 SkyScan query 15:11:13 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 15:11:13 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 15:11:13 Check angles 15:11:13 SkyScan query 15:11:14 SkyScan query done: ret=0 az=161.985<-10799 ze=38.505<-9433 Statuses=0009 0008 15:11:14 Msec=2250 True Az=161.985 Ze=38.505 Az status=0009 Ze status=0008 15:11:14 Check angles 15:11:14 SkyScan query 15:11:14 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:11:14 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:11:15 Check angles 15:11:15 SkyScan query 15:11:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:11:15 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:11:15 Message to Master queued w/err=0: serial=278481 error=0 15:11:20 Received message from Master: op=Filter serial=278482 15:11:20 Color wheel filter change from 0 to 0 15:11:20 FLIGetFilterPos err=0 currentPosition=0 15:11:20 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:20 Filter is already there-color wheel unchanged 15:11:20 Received message from Master: op=Shutter serial=278483 15:11:20 Shutter LASER close 15:11:20 Received message from Camera: op=State serial=278485 15:11:20 GetSingleValue result=40 Value=cccccccc 15:11:20 SkyScan query 15:11:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:11:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:21 Parameters OK 15:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:21 Set A/D data flow result=40 15:11:21 Set A/D channel type result=40 15:11:21 Set A/D encoding result=40 15:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:21 Set channel filter=0.000000e+000 result=40 15:11:21 Config A/D Result=40 15:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:21 Get A/D filter: -9.255963e+061 result=40 15:11:21 Get A/D value=-858993460 result=40 15:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:21 Parameters OK 15:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:21 Set A/D data flow result=40 15:11:21 Set A/D channel type result=40 15:11:21 Set A/D encoding result=40 15:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:21 Set channel filter=0.000000e+000 result=40 15:11:21 Config A/D Result=40 15:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:21 Get A/D filter: -9.255963e+061 result=40 15:11:21 Get A/D value=-858993460 result=40 15:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:21 Aux= 15:11:21 Message to Camera, serial 278485 queued 15:11:58 Received message from Master: op=PointingHead serial=278498 15:11:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:11:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:11:58 Point started: ret=0 15:11:58 point_skyscan result=0 15:11:59 Check angles 15:11:59 SkyScan query 15:11:59 SkyScan query done: ret=0 az=152.91<-10194 ze=8.925<-11405 Statuses=0009 0009 15:11:59 Msec=0 True Az=152.91 Ze=8.925 Az status=0009 Ze status=0009 15:12:00 Check angles 15:12:00 SkyScan query 15:12:00 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.48<-12832 Statuses=0009 0009 15:12:00 Msec=750 True Az=135.105 Ze=-12.48 Az status=0009 Ze status=0009 15:12:00 Check angles 15:12:00 SkyScan query 15:12:01 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.495<-14233 Statuses=0009 0009 15:12:01 Msec=1500 True Az=117.615 Ze=-33.495 Az status=0009 Ze status=0009 15:12:01 Check angles 15:12:01 SkyScan query 15:12:02 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.555<-15437 Statuses=0009 0009 15:12:02 Msec=2250 True Az=100.26 Ze=-51.555 Az status=0009 Ze status=0009 15:12:02 Check angles 15:12:02 SkyScan query 15:12:03 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:12:03 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:12:03 Check angles 15:12:03 SkyScan query 15:12:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:12:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:12:03 Message to Master queued w/err=0: serial=278498 error=0 15:12:08 Received message from Master: op=Filter serial=278499 15:12:08 Color wheel filter change from 0 to 0 15:12:08 FLIGetFilterPos err=0 currentPosition=0 15:12:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:08 Filter is already there-color wheel unchanged 15:12:08 Received message from Master: op=Shutter serial=278500 15:12:08 Shutter LASER close 15:12:08 Received message from Camera: op=State serial=278502 15:12:08 GetSingleValue result=40 Value=cccccccc 15:12:08 SkyScan query 15:12:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:12:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:09 Parameters OK 15:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:09 Set A/D data flow result=40 15:12:09 Set A/D channel type result=40 15:12:09 Set A/D encoding result=40 15:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:09 Set channel filter=0.000000e+000 result=40 15:12:09 Config A/D Result=40 15:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:09 Get A/D filter: -9.255963e+061 result=40 15:12:09 Get A/D value=-858993460 result=40 15:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:09 Parameters OK 15:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:09 Set A/D data flow result=40 15:12:09 Set A/D channel type result=40 15:12:09 Set A/D encoding result=40 15:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:09 Set channel filter=0.000000e+000 result=40 15:12:09 Config A/D Result=40 15:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:09 Get A/D filter: -9.255963e+061 result=40 15:12:09 Get A/D value=-858993460 result=40 15:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:09 Aux= 15:12:09 Message to Camera, serial 278502 queued 15:12:46 Received message from Master: op=PointingHead serial=278515 15:12:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:12:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:12:46 Point started: ret=0 15:12:46 point_skyscan result=0 15:12:47 Check angles 15:12:47 SkyScan query 15:12:48 SkyScan query done: ret=0 az=108.765<-7251 ze=-81<-17400 Statuses=0009 0009 15:12:48 Msec=0 True Az=108.765 Ze=-81 Az status=0009 Ze status=0009 15:12:48 Check angles 15:12:48 SkyScan query 15:12:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 15:12:48 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 15:12:48 Check angles 15:12:48 SkyScan query 15:12:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.925<-20195 Statuses=0008 0009 15:12:49 Msec=1500 True Az=112.995 Ze=-122.925 Az status=0008 Ze status=0009 15:12:49 Check angles 15:12:49 SkyScan query 15:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 15:12:50 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 15:12:50 Check angles 15:12:50 SkyScan query 15:12:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.82<-22988 Statuses=0008 0009 15:12:51 Msec=3000 True Az=112.995 Ze=-164.82 Az status=0008 Ze status=0009 15:12:51 Check angles 15:12:51 SkyScan query 15:12:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:12:51 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:12:51 Message to Master queued w/err=0: serial=278515 error=0 15:12:56 Received message from Master: op=Filter serial=278516 15:12:56 Color wheel filter change from 0 to 0 15:12:56 FLIGetFilterPos err=0 currentPosition=0 15:12:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:56 Filter is already there-color wheel unchanged 15:12:56 Received message from Master: op=Shutter serial=278517 15:12:56 Shutter LASER open 15:12:57 Received message from Camera: op=State serial=278519 15:12:57 GetSingleValue result=40 Value=cccccccc 15:12:57 SkyScan query 15:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:12:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:57 Parameters OK 15:12:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:57 Set A/D data flow result=40 15:12:57 Set A/D channel type result=40 15:12:57 Set A/D encoding result=40 15:12:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:57 Set channel filter=0.000000e+000 result=40 15:12:57 Config A/D Result=40 15:12:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:57 Get A/D filter: -9.255963e+061 result=40 15:12:57 Get A/D value=-858993460 result=40 15:12:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:57 Parameters OK 15:12:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:57 Set A/D data flow result=40 15:12:57 Set A/D channel type result=40 15:12:57 Set A/D encoding result=40 15:12:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:57 Set channel filter=0.000000e+000 result=40 15:12:57 Config A/D Result=40 15:12:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:57 Get A/D filter: -9.255963e+061 result=40 15:12:57 Get A/D value=-858993460 result=40 15:12:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:57 Aux= 15:12:57 Message to Camera, serial 278519 queued 15:13:06 Received message from Master: op=Shutter serial=278529 15:13:06 Shutter LASER close 15:13:06 Received message from Master: op=PointingHead serial=278533 15:13:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:13:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:13:06 Point started: ret=0 15:13:06 point_skyscan result=0 15:13:07 Check angles 15:13:07 SkyScan query 15:13:08 SkyScan query done: ret=0 az=89.52<-5968 ze=156.78<-1548 Statuses=0009 0009 15:13:08 Msec=0 True Az=89.52 Ze=156.78 Az status=0009 Ze status=0009 15:13:08 Check angles 15:13:08 SkyScan query 15:13:09 SkyScan query done: ret=0 az=72.075<-4805 ze=135.87<-2942 Statuses=0009 0009 15:13:09 Msec=750 True Az=72.075 Ze=135.87 Az status=0009 Ze status=0009 15:13:09 Check angles 15:13:09 SkyScan query 15:13:09 SkyScan query done: ret=0 az=54.3<-3620 ze=114.375<-4375 Statuses=0009 0009 15:13:09 Msec=1500 True Az=54.3 Ze=114.375 Az status=0009 Ze status=0009 15:13:09 Check angles 15:13:09 SkyScan query 15:13:10 SkyScan query done: ret=0 az=40.98<-2732 ze=93.51<-5766 Statuses=0009 0009 15:13:10 Msec=2250 True Az=40.98 Ze=93.51 Az status=0009 Ze status=0009 15:13:10 Check angles 15:13:10 SkyScan query 15:13:11 SkyScan query done: ret=0 az=40.995<-2733 ze=72.48<-7168 Statuses=0008 0009 15:13:11 Msec=3000 True Az=40.995 Ze=72.48 Az status=0008 Ze status=0009 15:13:11 Check angles 15:13:11 SkyScan query 15:13:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 15:13:12 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 15:13:12 Check angles 15:13:12 SkyScan query 15:13:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:13:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:13:12 Message to Master queued w/err=0: serial=278533 error=0 15:13:17 Received message from Master: op=Filter serial=278534 15:13:17 Color wheel filter change from 0 to 0 15:13:17 FLIGetFilterPos err=0 currentPosition=0 15:13:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:17 Filter is already there-color wheel unchanged 15:13:18 Received message from Master: op=Shutter serial=278535 15:13:18 Shutter LASER close 15:13:18 Received message from Camera: op=State serial=278537 15:13:18 GetSingleValue result=40 Value=cccccccc 15:13:18 SkyScan query 15:13:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:13:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:18 Parameters OK 15:13:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:18 Set A/D data flow result=40 15:13:18 Set A/D channel type result=40 15:13:18 Set A/D encoding result=40 15:13:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:18 Set channel filter=0.000000e+000 result=40 15:13:18 Config A/D Result=40 15:13:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:18 Get A/D filter: -9.255963e+061 result=40 15:13:18 Get A/D value=-858993460 result=40 15:13:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:18 Parameters OK 15:13:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:18 Set A/D data flow result=40 15:13:18 Set A/D channel type result=40 15:13:18 Set A/D encoding result=40 15:13:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:18 Set channel filter=0.000000e+000 result=40 15:13:18 Config A/D Result=40 15:13:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:18 Get A/D filter: -9.255963e+061 result=40 15:13:18 Get A/D value=-858993460 result=40 15:13:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:18 Aux= 15:13:18 Message to Camera, serial 278537 queued 15:13:55 Received message from Master: op=PointingHead serial=278550 15:13:55 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:13:55 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:13:56 Point started: ret=0 15:13:56 point_skyscan result=0 15:13:56 Check angles 15:13:56 SkyScan query 15:13:57 SkyScan query done: ret=0 az=63.855<-4257 ze=66.54<-7564 Statuses=0009 0008 15:13:57 Msec=0 True Az=63.855 Ze=66.54 Az status=0009 Ze status=0008 15:13:57 Check angles 15:13:57 SkyScan query 15:13:58 SkyScan query done: ret=0 az=81.36<-5424 ze=66.51<-7566 Statuses=0009 0008 15:13:58 Msec=750 True Az=81.36 Ze=66.51 Az status=0009 Ze status=0008 15:13:58 Check angles 15:13:58 SkyScan query 15:13:58 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 15:13:58 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 15:13:59 Check angles 15:13:59 SkyScan query 15:13:59 SkyScan query done: ret=0 az=116.595<-7773 ze=66.495<-7567 Statuses=0009 0008 15:13:59 Msec=2250 True Az=116.595 Ze=66.495 Az status=0009 Ze status=0008 15:13:59 Check angles 15:13:59 SkyScan query 15:14:00 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 15:14:00 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 15:14:00 Check angles 15:14:00 SkyScan query 15:14:01 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 15:14:01 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 15:14:01 Check angles 15:14:01 SkyScan query 15:14:01 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:14:01 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:14:01 Message to Master queued w/err=0: serial=278550 error=0 15:14:06 Received message from Master: op=Filter serial=278551 15:14:06 Color wheel filter change from 0 to 0 15:14:06 FLIGetFilterPos err=0 currentPosition=0 15:14:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:06 Filter is already there-color wheel unchanged 15:14:07 Received message from Master: op=Shutter serial=278552 15:14:07 Shutter LASER close 15:14:07 Received message from Camera: op=State serial=278554 15:14:07 GetSingleValue result=40 Value=cccccccc 15:14:07 SkyScan query 15:14:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:14:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:07 Parameters OK 15:14:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:07 Set A/D data flow result=40 15:14:07 Set A/D channel type result=40 15:14:07 Set A/D encoding result=40 15:14:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:07 Set channel filter=0.000000e+000 result=40 15:14:07 Config A/D Result=40 15:14:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:07 Get A/D filter: -9.255963e+061 result=40 15:14:07 Get A/D value=-858993460 result=40 15:14:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:07 Parameters OK 15:14:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:07 Set A/D data flow result=40 15:14:07 Set A/D channel type result=40 15:14:07 Set A/D encoding result=40 15:14:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:07 Set channel filter=0.000000e+000 result=40 15:14:07 Config A/D Result=40 15:14:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:07 Get A/D filter: -9.255963e+061 result=40 15:14:07 Get A/D value=-858993460 result=40 15:14:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:07 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:07 Aux= 15:14:07 Message to Camera, serial 278554 queued 15:14:44 Received message from Master: op=PointingHead serial=278567 15:14:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:14:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:14:44 Point started: ret=0 15:14:44 point_skyscan result=0 15:14:45 Check angles 15:14:45 SkyScan query 15:14:46 SkyScan query done: ret=0 az=134.82<-8988 ze=36.66<-9556 Statuses=0009 0009 15:14:46 Msec=0 True Az=134.82 Ze=36.66 Az status=0009 Ze status=0009 15:14:46 Check angles 15:14:46 SkyScan query 15:14:46 SkyScan query done: ret=0 az=117.105<-7807 ze=15.3<-10980 Statuses=0009 0009 15:14:46 Msec=750 True Az=117.105 Ze=15.3 Az status=0009 Ze status=0009 15:14:47 Check angles 15:14:47 SkyScan query 15:14:47 SkyScan query done: ret=0 az=99.675<-6645 ze=-5.685<-12379 Statuses=0009 0009 15:14:47 Msec=1500 True Az=99.675 Ze=-5.685 Az status=0009 Ze status=0009 15:14:47 Check angles 15:14:47 SkyScan query 15:14:48 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.67<-13778 Statuses=0009 0009 15:14:48 Msec=2250 True Az=82.2 Ze=-26.67 Az status=0009 Ze status=0009 15:14:48 Check angles 15:14:48 SkyScan query 15:14:49 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.58<-14572 Statuses=0009 0008 15:14:49 Msec=3000 True Az=64.68 Ze=-38.58 Az status=0009 Ze status=0008 15:14:49 Check angles 15:14:49 SkyScan query 15:14:49 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.52<-14568 Statuses=0009 0008 15:14:49 Msec=3750 True Az=47.19 Ze=-38.52 Az status=0009 Ze status=0008 15:14:50 Check angles 15:14:50 SkyScan query 15:14:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:14:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:14:50 Message to Master queued w/err=0: serial=278567 error=0 15:14:55 Received message from Master: op=Filter serial=278568 15:14:55 Color wheel filter change from 0 to 0 15:14:55 FLIGetFilterPos err=0 currentPosition=0 15:14:55 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:55 Filter is already there-color wheel unchanged 15:14:55 Received message from Master: op=Shutter serial=278569 15:14:55 Shutter LASER close 15:14:55 Received message from Camera: op=State serial=278571 15:14:55 GetSingleValue result=40 Value=cccccccc 15:14:55 SkyScan query 15:14:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:14:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:56 Parameters OK 15:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:56 Set A/D data flow result=40 15:14:56 Set A/D channel type result=40 15:14:56 Set A/D encoding result=40 15:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:56 Set channel filter=0.000000e+000 result=40 15:14:56 Config A/D Result=40 15:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:56 Get A/D filter: -9.255963e+061 result=40 15:14:56 Get A/D value=-858993460 result=40 15:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:56 Parameters OK 15:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:56 Set A/D data flow result=40 15:14:56 Set A/D channel type result=40 15:14:56 Set A/D encoding result=40 15:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:56 Set channel filter=0.000000e+000 result=40 15:14:56 Config A/D Result=40 15:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:56 Get A/D filter: -9.255963e+061 result=40 15:14:56 Get A/D value=-858993460 result=40 15:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:56 Aux= 15:14:56 Message to Camera, serial 278571 queued 15:15:27 Received message from Master: op=Identify serial=278575 15:15:33 Received message from Master: op=PointingHead serial=278587 15:15:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:15:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:15:33 Point started: ret=0 15:15:33 point_skyscan result=0 15:15:34 Check angles 15:15:34 SkyScan query 15:15:34 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.385<-16559 Statuses=0009 0009 15:15:34 Msec=0 True Az=64.2 Ze=-68.385 Az status=0009 Ze status=0009 15:15:35 Check angles 15:15:35 SkyScan query 15:15:35 SkyScan query done: ret=0 az=82.11<-5474 ze=-89.805<-17987 Statuses=0009 0009 15:15:35 Msec=750 True Az=82.11 Ze=-89.805 Az status=0009 Ze status=0009 15:15:35 Check angles 15:15:35 SkyScan query 15:15:36 SkyScan query done: ret=0 az=99.615<-6641 ze=-110.745<-19383 Statuses=0009 0009 15:15:36 Msec=1500 True Az=99.615 Ze=-110.745 Az status=0009 Ze status=0009 15:15:36 Check angles 15:15:36 SkyScan query 15:15:37 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.7<-20780 Statuses=0009 0009 15:15:37 Msec=2250 True Az=117.06 Ze=-131.7 Az status=0009 Ze status=0009 15:15:37 Check angles 15:15:37 SkyScan query 15:15:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 15:15:38 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 15:15:38 Check angles 15:15:38 SkyScan query 15:15:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:15:38 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:15:38 Message to Master queued w/err=0: serial=278587 error=0 15:15:43 Received message from Master: op=Filter serial=278588 15:15:43 Color wheel filter change from 0 to 0 15:15:43 FLIGetFilterPos err=0 currentPosition=0 15:15:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:43 Filter is already there-color wheel unchanged 15:15:43 Received message from Master: op=Shutter serial=278589 15:15:43 Shutter LASER close 15:15:43 Received message from Camera: op=State serial=278591 15:15:43 GetSingleValue result=40 Value=cccccccc 15:15:43 SkyScan query 15:15:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:15:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:44 Parameters OK 15:15:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:44 Set A/D data flow result=40 15:15:44 Set A/D channel type result=40 15:15:44 Set A/D encoding result=40 15:15:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:44 Set channel filter=0.000000e+000 result=40 15:15:44 Config A/D Result=40 15:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:44 Get A/D filter: -9.255963e+061 result=40 15:15:44 Get A/D value=-858993460 result=40 15:15:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:44 Parameters OK 15:15:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:44 Set A/D data flow result=40 15:15:44 Set A/D channel type result=40 15:15:44 Set A/D encoding result=40 15:15:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:44 Set channel filter=0.000000e+000 result=40 15:15:44 Config A/D Result=40 15:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:44 Get A/D filter: -9.255963e+061 result=40 15:15:44 Get A/D value=-858993460 result=40 [UTC 2018-12-19 15:15:44] 15:15:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:44 Aux= 15:15:44 Message to Camera, serial 278591 queued [UTC 2018-12-19 15:15:52] 15:16:21 Received message from Master: op=PointingHead serial=278604 15:16:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:16:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:16:21 Point started: ret=0 15:16:21 point_skyscan result=0 15:16:22 Check angles 15:16:22 SkyScan query 15:16:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 15:16:23 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 15:16:23 Check angles 15:16:23 SkyScan query 15:16:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:16:23 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:16:23 Message to Master queued w/err=0: serial=278604 error=0 15:16:28 Received message from Master: op=Filter serial=278605 15:16:28 Color wheel filter change from 0 to 0 15:16:28 FLIGetFilterPos err=0 currentPosition=0 15:16:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:28 Filter is already there-color wheel unchanged 15:16:28 Received message from Master: op=Shutter serial=278606 15:16:28 Shutter LASER open 15:16:29 Received message from Camera: op=State serial=278608 15:16:29 GetSingleValue result=40 Value=cccccccc 15:16:29 SkyScan query 15:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:16:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:29 Parameters OK 15:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:29 Set A/D data flow result=40 15:16:29 Set A/D channel type result=40 15:16:29 Set A/D encoding result=40 15:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:29 Set channel filter=0.000000e+000 result=40 15:16:29 Config A/D Result=40 15:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:29 Get A/D filter: -9.255963e+061 result=40 15:16:29 Get A/D value=-858993460 result=40 15:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:29 Parameters OK 15:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:29 Set A/D data flow result=40 15:16:29 Set A/D channel type result=40 15:16:29 Set A/D encoding result=40 15:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:29 Set channel filter=0.000000e+000 result=40 15:16:29 Config A/D Result=40 15:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:29 Get A/D filter: -9.255963e+061 result=40 15:16:29 Get A/D value=-858993460 result=40 15:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:29 Aux= 15:16:29 Message to Camera, serial 278608 queued 15:16:38 Received message from Master: op=Shutter serial=278618 15:16:38 Shutter LASER close 15:16:38 Received message from Master: op=PointingHead serial=278622 15:16:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:16:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:16:39 Point started: ret=0 15:16:39 point_skyscan result=0 15:16:39 Check angles 15:16:39 SkyScan query 15:16:40 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.55<-21570 Statuses=0009 0009 15:16:40 Msec=0 True Az=135.72 Ze=-143.55 Az status=0009 Ze status=0009 15:16:40 Check angles 15:16:40 SkyScan query 15:16:41 SkyScan query done: ret=0 az=153.27<-10218 ze=-122.565<-20171 Statuses=0009 0009 15:16:41 Msec=750 True Az=153.27 Ze=-122.565 Az status=0009 Ze status=0009 15:16:41 Check angles 15:16:41 SkyScan query 15:16:41 SkyScan query done: ret=0 az=170.7<-11380 ze=-101.715<-18781 Statuses=0009 0009 15:16:41 Msec=1500 True Az=170.7 Ze=-101.715 Az status=0009 Ze status=0009 15:16:42 Check angles 15:16:42 SkyScan query 15:16:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.655<-17377 Statuses=0008 0009 15:16:42 Msec=2250 True Az=175.995 Ze=-80.655 Az status=0008 Ze status=0009 15:16:42 Check angles 15:16:42 SkyScan query 15:16:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.76<-15984 Statuses=0008 0009 15:16:43 Msec=3000 True Az=176.01 Ze=-59.76 Az status=0008 Ze status=0009 15:16:43 Check angles 15:16:43 SkyScan query 15:16:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:16:44 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:16:44 Message to Master queued w/err=0: serial=278622 error=0 15:16:49 Received message from Master: op=Filter serial=278623 15:16:49 Color wheel filter change from 0 to 0 15:16:49 FLIGetFilterPos err=0 currentPosition=0 15:16:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:49 Filter is already there-color wheel unchanged 15:16:49 Received message from Master: op=Shutter serial=278624 15:16:49 Shutter LASER close 15:16:49 Received message from Camera: op=State serial=278626 15:16:49 GetSingleValue result=40 Value=cccccccc 15:16:49 SkyScan query 15:16:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:16:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:50 Parameters OK 15:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:50 Set A/D data flow result=40 15:16:50 Set A/D channel type result=40 15:16:50 Set A/D encoding result=40 15:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:50 Set channel filter=0.000000e+000 result=40 15:16:50 Config A/D Result=40 15:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:50 Get A/D filter: -9.255963e+061 result=40 15:16:50 Get A/D value=-858993460 result=40 15:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:50 Parameters OK 15:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:50 Set A/D data flow result=40 15:16:50 Set A/D channel type result=40 15:16:50 Set A/D encoding result=40 15:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:50 Set channel filter=0.000000e+000 result=40 15:16:50 Config A/D Result=40 15:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:50 Get A/D filter: -9.255963e+061 result=40 15:16:50 Get A/D value=-858993460 result=40 15:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:50 Aux= 15:16:50 Message to Camera, serial 278626 queued 15:17:26 Received message from Master: op=PointingHead serial=278639 15:17:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:17:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:17:27 Point started: ret=0 15:17:27 point_skyscan result=0 15:17:28 Check angles 15:17:28 SkyScan query 15:17:28 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.705<-13447 Statuses=0009 0009 15:17:28 Msec=0 True Az=152.97 Ze=-21.705 Az status=0009 Ze status=0009 15:17:28 Check angles 15:17:28 SkyScan query 15:17:29 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.39<-12026 Statuses=0009 0009 15:17:29 Msec=750 True Az=135.15 Ze=-0.39 Az status=0009 Ze status=0009 15:17:29 Check angles 15:17:29 SkyScan query 15:17:30 SkyScan query done: ret=0 az=117.66<-7844 ze=20.565<-10629 Statuses=0009 0009 15:17:30 Msec=1500 True Az=117.66 Ze=20.565 Az status=0009 Ze status=0009 15:17:30 Check angles 15:17:30 SkyScan query 15:17:30 SkyScan query done: ret=0 az=100.32<-6688 ze=41.535<-9231 Statuses=0009 0009 15:17:30 Msec=2250 True Az=100.32 Ze=41.535 Az status=0009 Ze status=0009 15:17:31 Check angles 15:17:31 SkyScan query 15:17:31 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 15:17:31 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 15:17:31 Check angles 15:17:31 SkyScan query 15:17:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:17:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:17:32 Message to Master queued w/err=0: serial=278639 error=0 15:17:37 Received message from Master: op=Filter serial=278640 15:17:37 Color wheel filter change from 0 to 0 15:17:37 FLIGetFilterPos err=0 currentPosition=0 15:17:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:37 Filter is already there-color wheel unchanged 15:17:37 Received message from Master: op=Shutter serial=278641 15:17:37 Shutter LASER close 15:17:37 Received message from Camera: op=State serial=278643 15:17:37 GetSingleValue result=40 Value=cccccccc 15:17:37 SkyScan query 15:17:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:17:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:38 Parameters OK 15:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:38 Set A/D data flow result=40 15:17:38 Set A/D channel type result=40 15:17:38 Set A/D encoding result=40 15:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:38 Set channel filter=0.000000e+000 result=40 15:17:38 Config A/D Result=40 15:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:38 Get A/D filter: -9.255963e+061 result=40 15:17:38 Get A/D value=-858993460 result=40 15:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:38 Parameters OK 15:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:38 Set A/D data flow result=40 15:17:38 Set A/D channel type result=40 15:17:38 Set A/D encoding result=40 15:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:38 Set channel filter=0.000000e+000 result=40 15:17:38 Config A/D Result=40 15:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:38 Get A/D filter: -9.255963e+061 result=40 15:17:38 Get A/D value=-858993460 result=40 15:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:38 Aux= 15:17:38 Message to Camera, serial 278643 queued 15:18:15 Received message from Master: op=PointingHead serial=278656 15:18:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:18:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:18:15 Point started: ret=0 15:18:15 point_skyscan result=0 15:18:16 Check angles 15:18:16 SkyScan query 15:18:16 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 15:18:16 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 15:18:16 Check angles 15:18:16 SkyScan query 15:18:17 SkyScan query done: ret=0 az=126.585<-8439 ze=38.49<-9434 Statuses=0009 0008 15:18:17 Msec=750 True Az=126.585 Ze=38.49 Az status=0009 Ze status=0008 15:18:17 Check angles 15:18:17 SkyScan query 15:18:18 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 15:18:18 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 15:18:18 Check angles 15:18:18 SkyScan query 15:18:19 SkyScan query done: ret=0 az=161.745<-10783 ze=38.505<-9433 Statuses=0009 0008 15:18:19 Msec=2250 True Az=161.745 Ze=38.505 Az status=0009 Ze status=0008 15:18:19 Check angles 15:18:19 SkyScan query 15:18:19 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:18:19 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:18:20 Check angles 15:18:20 SkyScan query 15:18:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:18:20 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:18:20 Message to Master queued w/err=0: serial=278656 error=0 15:18:25 Received message from Master: op=Filter serial=278657 15:18:25 Color wheel filter change from 0 to 0 15:18:25 FLIGetFilterPos err=0 currentPosition=0 15:18:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:25 Filter is already there-color wheel unchanged 15:18:25 Received message from Master: op=Shutter serial=278658 15:18:25 Shutter LASER close 15:18:25 Received message from Camera: op=State serial=278660 15:18:25 GetSingleValue result=40 Value=cccccccc 15:18:25 SkyScan query 15:18:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:18:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:26 Parameters OK 15:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:26 Set A/D data flow result=40 15:18:26 Set A/D channel type result=40 15:18:26 Set A/D encoding result=40 15:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:26 Set channel filter=0.000000e+000 result=40 15:18:26 Config A/D Result=40 15:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:26 Get A/D filter: -9.255963e+061 result=40 15:18:26 Get A/D value=-858993460 result=40 15:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:26 Parameters OK 15:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:26 Set A/D data flow result=40 15:18:26 Set A/D channel type result=40 15:18:26 Set A/D encoding result=40 15:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:26 Set channel filter=0.000000e+000 result=40 15:18:26 Config A/D Result=40 15:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:26 Get A/D filter: -9.255963e+061 result=40 15:18:26 Get A/D value=-858993460 result=40 15:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:26 Aux= 15:18:26 Message to Camera, serial 278660 queued 15:19:03 Received message from Master: op=PointingHead serial=278673 15:19:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:19:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:19:03 Point started: ret=0 15:19:03 point_skyscan result=0 15:19:04 Check angles 15:19:04 SkyScan query 15:19:04 SkyScan query done: ret=0 az=152.895<-10193 ze=8.685<-11421 Statuses=0009 0009 15:19:04 Msec=0 True Az=152.895 Ze=8.685 Az status=0009 Ze status=0009 15:19:05 Check angles 15:19:05 SkyScan query 15:19:05 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.255<-12817 Statuses=0009 0009 15:19:05 Msec=750 True Az=135.39 Ze=-12.255 Az status=0009 Ze status=0009 15:19:05 Check angles 15:19:05 SkyScan query 15:19:06 SkyScan query done: ret=0 az=117.855<-7857 ze=-33.18<-14212 Statuses=0009 0009 15:19:06 Msec=1500 True Az=117.855 Ze=-33.18 Az status=0009 Ze status=0009 15:19:06 Check angles 15:19:06 SkyScan query 15:19:07 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.54<-15436 Statuses=0009 0009 15:19:07 Msec=2250 True Az=100.485 Ze=-51.54 Az status=0009 Ze status=0009 15:19:07 Check angles 15:19:07 SkyScan query 15:19:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 15:19:07 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 15:19:08 Check angles 15:19:08 SkyScan query 15:19:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:19:08 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:19:08 Message to Master queued w/err=0: serial=278673 error=0 15:19:13 Received message from Master: op=Filter serial=278674 15:19:13 Color wheel filter change from 0 to 0 15:19:13 FLIGetFilterPos err=0 currentPosition=0 15:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:13 Filter is already there-color wheel unchanged 15:19:13 Received message from Master: op=Shutter serial=278675 15:19:13 Shutter LASER close 15:19:13 Received message from Camera: op=State serial=278677 15:19:13 GetSingleValue result=40 Value=cccccccc 15:19:13 SkyScan query 15:19:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:14 Parameters OK 15:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:14 Set A/D data flow result=40 15:19:14 Set A/D channel type result=40 15:19:14 Set A/D encoding result=40 15:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:14 Set channel filter=0.000000e+000 result=40 15:19:14 Config A/D Result=40 15:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:14 Get A/D filter: -9.255963e+061 result=40 15:19:14 Get A/D value=-858993460 result=40 15:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:14 Parameters OK 15:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:14 Set A/D data flow result=40 15:19:14 Set A/D channel type result=40 15:19:14 Set A/D encoding result=40 15:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:14 Set channel filter=0.000000e+000 result=40 15:19:14 Config A/D Result=40 15:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:14 Get A/D filter: -9.255963e+061 result=40 15:19:14 Get A/D value=-858993460 result=40 15:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:14 Aux= 15:19:14 Message to Camera, serial 278677 queued 15:19:51 Received message from Master: op=PointingHead serial=278690 15:19:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:19:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:19:51 Point started: ret=0 15:19:51 point_skyscan result=0 15:19:52 Check angles 15:19:52 SkyScan query 15:19:52 SkyScan query done: ret=0 az=109.575<-7305 ze=-81.825<-17455 Statuses=0009 0009 15:19:52 Msec=0 True Az=109.575 Ze=-81.825 Az status=0009 Ze status=0009 15:19:53 Check angles 15:19:53 SkyScan query 15:19:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.125<-18875 Statuses=0008 0009 15:19:53 Msec=750 True Az=112.995 Ze=-103.125 Az status=0008 Ze status=0009 15:19:53 Check angles 15:19:53 SkyScan query 15:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.095<-20273 Statuses=0008 0009 15:19:54 Msec=1500 True Az=112.995 Ze=-124.095 Az status=0008 Ze status=0009 15:19:54 Check angles 15:19:54 SkyScan query 15:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 15:19:55 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 15:19:55 Check angles 15:19:55 SkyScan query 15:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.975<-23065 Statuses=0008 0009 15:19:55 Msec=3000 True Az=112.995 Ze=-165.975 Az status=0008 Ze status=0009 15:19:56 Check angles 15:19:56 SkyScan query 15:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:19:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:19:56 Message to Master queued w/err=0: serial=278690 error=0 15:20:01 Received message from Master: op=Filter serial=278691 15:20:01 Color wheel filter change from 0 to 0 15:20:01 FLIGetFilterPos err=0 currentPosition=0 15:20:01 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:01 Filter is already there-color wheel unchanged 15:20:01 Received message from Master: op=Shutter serial=278692 15:20:01 Shutter LASER open 15:20:02 Received message from Camera: op=State serial=278694 15:20:02 GetSingleValue result=40 Value=cccccccc 15:20:02 SkyScan query 15:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:20:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:02 Parameters OK 15:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:02 Set A/D data flow result=40 15:20:02 Set A/D channel type result=40 15:20:02 Set A/D encoding result=40 15:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:02 Set channel filter=0.000000e+000 result=40 15:20:02 Config A/D Result=40 15:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:02 Get A/D filter: -9.255963e+061 result=40 15:20:02 Get A/D value=-858993460 result=40 15:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:02 Parameters OK 15:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:02 Set A/D data flow result=40 15:20:02 Set A/D channel type result=40 15:20:02 Set A/D encoding result=40 15:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:02 Set channel filter=0.000000e+000 result=40 15:20:02 Config A/D Result=40 15:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:02 Get A/D filter: -9.255963e+061 result=40 15:20:02 Get A/D value=-858993460 result=40 15:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:02 Aux= 15:20:02 Message to Camera, serial 278694 queued 15:20:11 Received message from Master: op=Shutter serial=278704 15:20:11 Shutter LASER close 15:20:11 Received message from Master: op=PointingHead serial=278708 15:20:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:20:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:20:11 Point started: ret=0 15:20:11 point_skyscan result=0 15:20:12 Check angles 15:20:12 SkyScan query 15:20:13 SkyScan query done: ret=0 az=89.655<-5977 ze=157.005<-1533 Statuses=0009 0009 15:20:13 Msec=0 True Az=89.655 Ze=157.005 Az status=0009 Ze status=0009 15:20:13 Check angles 15:20:13 SkyScan query 15:20:13 SkyScan query done: ret=0 az=71.865<-4791 ze=135.63<-2958 Statuses=0009 0009 15:20:13 Msec=750 True Az=71.865 Ze=135.63 Az status=0009 Ze status=0009 15:20:14 Check angles 15:20:14 SkyScan query 15:20:14 SkyScan query done: ret=0 az=54.075<-3605 ze=114.21<-4386 Statuses=0009 0009 15:20:14 Msec=1500 True Az=54.075 Ze=114.21 Az status=0009 Ze status=0009 15:20:14 Check angles 15:20:14 SkyScan query 15:20:15 SkyScan query done: ret=0 az=40.995<-2733 ze=93.255<-5783 Statuses=0009 0009 15:20:15 Msec=2250 True Az=40.995 Ze=93.255 Az status=0009 Ze status=0009 15:20:15 Check angles 15:20:15 SkyScan query 15:20:16 SkyScan query done: ret=0 az=40.995<-2733 ze=72.315<-7179 Statuses=0008 0009 15:20:16 Msec=3000 True Az=40.995 Ze=72.315 Az status=0008 Ze status=0009 15:20:16 Check angles 15:20:16 SkyScan query 15:20:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.185<-8521 Statuses=0008 0009 15:20:16 Msec=3750 True Az=40.995 Ze=52.185 Az status=0008 Ze status=0009 15:20:17 Check angles 15:20:17 SkyScan query 15:20:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:20:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:20:17 Message to Master queued w/err=0: serial=278708 error=0 15:20:22 Received message from Master: op=Filter serial=278709 15:20:22 Color wheel filter change from 0 to 0 15:20:22 FLIGetFilterPos err=0 currentPosition=0 15:20:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:22 Filter is already there-color wheel unchanged 15:20:22 Received message from Master: op=Shutter serial=278710 15:20:22 Shutter LASER close 15:20:23 Received message from Camera: op=State serial=278712 15:20:23 GetSingleValue result=40 Value=cccccccc 15:20:23 SkyScan query 15:20:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:20:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:23 Parameters OK 15:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:23 Set A/D data flow result=40 15:20:23 Set A/D channel type result=40 15:20:23 Set A/D encoding result=40 15:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:23 Set channel filter=0.000000e+000 result=40 15:20:23 Config A/D Result=40 15:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:23 Get A/D filter: -9.255963e+061 result=40 15:20:23 Get A/D value=-858993460 result=40 15:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:23 Parameters OK 15:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:23 Set A/D data flow result=40 15:20:23 Set A/D channel type result=40 15:20:23 Set A/D encoding result=40 15:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:23 Set channel filter=0.000000e+000 result=40 15:20:23 Config A/D Result=40 15:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:23 Get A/D filter: -9.255963e+061 result=40 15:20:23 Get A/D value=-858993460 result=40 15:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:23 Aux= 15:20:23 Message to Camera, serial 278712 queued 15:20:59 Received message from Master: op=PointingHead serial=278724 15:20:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:20:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:20:59 Point started: ret=0 15:20:59 point_skyscan result=0 15:21:00 Check angles 15:21:00 SkyScan query 15:21:01 SkyScan query done: ret=0 az=63.84<-4256 ze=66.54<-7564 Statuses=0009 0008 15:21:01 Msec=0 True Az=63.84 Ze=66.54 Az status=0009 Ze status=0008 15:21:01 Check angles 15:21:01 SkyScan query 15:21:01 SkyScan query done: ret=0 az=81.33<-5422 ze=66.51<-7566 Statuses=0009 0008 15:21:01 Msec=750 True Az=81.33 Ze=66.51 Az status=0009 Ze status=0008 15:21:02 Check angles 15:21:02 SkyScan query 15:21:02 SkyScan query done: ret=0 az=98.79<-6586 ze=66.495<-7567 Statuses=0009 0008 15:21:02 Msec=1500 True Az=98.79 Ze=66.495 Az status=0009 Ze status=0008 15:21:02 Check angles 15:21:02 SkyScan query 15:21:03 SkyScan query done: ret=0 az=116.205<-7747 ze=66.495<-7567 Statuses=0009 0008 15:21:03 Msec=2250 True Az=116.205 Ze=66.495 Az status=0009 Ze status=0008 15:21:03 Check angles 15:21:03 SkyScan query 15:21:04 SkyScan query done: ret=0 az=133.695<-8913 ze=66.495<-7567 Statuses=0009 0008 15:21:04 Msec=3000 True Az=133.695 Ze=66.495 Az status=0009 Ze status=0008 15:21:04 Check angles 15:21:04 SkyScan query 15:21:04 SkyScan query done: ret=0 az=151.14<-10076 ze=66.495<-7567 Statuses=0009 0008 15:21:04 Msec=3750 True Az=151.14 Ze=66.495 Az status=0009 Ze status=0008 15:21:05 Check angles 15:21:05 SkyScan query 15:21:05 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:21:05 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:21:05 Message to Master queued w/err=0: serial=278724 error=0 15:21:10 Received message from Master: op=Filter serial=278725 15:21:10 Color wheel filter change from 0 to 0 15:21:10 FLIGetFilterPos err=0 currentPosition=0 15:21:10 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:10 Filter is already there-color wheel unchanged 15:21:10 Received message from Master: op=Shutter serial=278726 15:21:10 Shutter LASER close 15:21:10 Received message from Camera: op=State serial=278728 15:21:10 GetSingleValue result=40 Value=cccccccc 15:21:10 SkyScan query 15:21:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:21:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:11 Parameters OK 15:21:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:11 Set A/D data flow result=40 15:21:11 Set A/D channel type result=40 15:21:11 Set A/D encoding result=40 15:21:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:11 Set channel filter=0.000000e+000 result=40 15:21:11 Config A/D Result=40 15:21:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:11 Get A/D filter: -9.255963e+061 result=40 15:21:11 Get A/D value=-858993460 result=40 15:21:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:11 Parameters OK 15:21:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:11 Set A/D data flow result=40 15:21:11 Set A/D channel type result=40 15:21:11 Set A/D encoding result=40 15:21:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:11 Set channel filter=0.000000e+000 result=40 15:21:11 Config A/D Result=40 15:21:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:11 Get A/D filter: -9.255963e+061 result=40 15:21:11 Get A/D value=-858993460 result=40 15:21:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:11 Aux= 15:21:11 Message to Camera, serial 278728 queued 15:21:48 Received message from Master: op=PointingHead serial=278741 15:21:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:21:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:21:48 Point started: ret=0 15:21:48 point_skyscan result=0 15:21:49 Check angles 15:21:49 SkyScan query 15:21:50 SkyScan query done: ret=0 az=134.82<-8988 ze=36.765<-9549 Statuses=0009 0009 15:21:50 Msec=0 True Az=134.82 Ze=36.765 Az status=0009 Ze status=0009 15:21:50 Check angles 15:21:50 SkyScan query 15:21:50 SkyScan query done: ret=0 az=117.345<-7823 ze=15.78<-10948 Statuses=0009 0009 15:21:50 Msec=750 True Az=117.345 Ze=15.78 Az status=0009 Ze status=0009 15:21:50 Check angles 15:21:50 SkyScan query 15:21:51 SkyScan query done: ret=0 az=99.705<-6647 ze=-5.61<-12374 Statuses=0009 0009 15:21:51 Msec=1500 True Az=99.705 Ze=-5.61 Az status=0009 Ze status=0009 15:21:51 Check angles 15:21:51 SkyScan query 15:21:52 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.06<-13804 Statuses=0009 0009 15:21:52 Msec=2250 True Az=81.81 Ze=-27.06 Az status=0009 Ze status=0009 15:21:52 Check angles 15:21:52 SkyScan query 15:21:53 SkyScan query done: ret=0 az=64.23<-4282 ze=-38.58<-14572 Statuses=0009 0008 15:21:53 Msec=3000 True Az=64.23 Ze=-38.58 Az status=0009 Ze status=0008 15:21:53 Check angles 15:21:53 SkyScan query 15:21:53 SkyScan query done: ret=0 az=46.545<-3103 ze=-38.52<-14568 Statuses=0009 0008 15:21:53 Msec=3750 True Az=46.545 Ze=-38.52 Az status=0009 Ze status=0008 15:21:54 Check angles 15:21:54 SkyScan query 15:21:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:21:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:21:54 Message to Master queued w/err=0: serial=278741 error=0 15:21:59 Received message from Master: op=Filter serial=278742 15:21:59 Color wheel filter change from 0 to 0 15:21:59 FLIGetFilterPos err=0 currentPosition=0 15:21:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:59 Filter is already there-color wheel unchanged 15:21:59 Received message from Master: op=Shutter serial=278743 15:21:59 Shutter LASER close 15:21:59 Received message from Camera: op=State serial=278745 15:21:59 GetSingleValue result=40 Value=cccccccc 15:21:59 SkyScan query 15:22:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:22:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:00 Parameters OK 15:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:00 Set A/D data flow result=40 15:22:00 Set A/D channel type result=40 15:22:00 Set A/D encoding result=40 15:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:00 Set channel filter=0.000000e+000 result=40 15:22:00 Config A/D Result=40 15:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:00 Get A/D filter: -9.255963e+061 result=40 15:22:00 Get A/D value=-858993460 result=40 15:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:00 Parameters OK 15:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:00 Set A/D data flow result=40 15:22:00 Set A/D channel type result=40 15:22:00 Set A/D encoding result=40 15:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:00 Set channel filter=0.000000e+000 result=40 15:22:00 Config A/D Result=40 15:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:00 Get A/D filter: -9.255963e+061 result=40 15:22:00 Get A/D value=-858993460 result=40 15:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:00 Aux= 15:22:00 Message to Camera, serial 278745 queued 15:22:37 Received message from Master: op=PointingHead serial=278758 15:22:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:22:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:22:37 Point started: ret=0 15:22:37 point_skyscan result=0 15:22:38 Check angles 15:22:38 SkyScan query 15:22:38 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.34<-16556 Statuses=0009 0009 15:22:38 Msec=0 True Az=64.2 Ze=-68.34 Az status=0009 Ze status=0009 15:22:39 Check angles 15:22:39 SkyScan query 15:22:39 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.325<-17955 Statuses=0009 0009 15:22:39 Msec=750 True Az=81.57 Ze=-89.325 Az status=0009 Ze status=0009 15:22:39 Check angles 15:22:39 SkyScan query 15:22:40 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.25<-19350 Statuses=0009 0009 15:22:40 Msec=1500 True Az=99.135 Ze=-110.25 Az status=0009 Ze status=0009 15:22:40 Check angles 15:22:40 SkyScan query 15:22:41 SkyScan query done: ret=0 az=116.535<-7769 ze=-131.19<-20746 Statuses=0009 0009 15:22:41 Msec=2250 True Az=116.535 Ze=-131.19 Az status=0009 Ze status=0009 15:22:41 Check angles 15:22:41 SkyScan query 15:22:41 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 15:22:41 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 15:22:42 Check angles 15:22:42 SkyScan query 15:22:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 15:22:42 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 15:22:42 Message to Master queued w/err=0: serial=278758 error=0 15:22:47 Received message from Master: op=Filter serial=278759 15:22:47 Color wheel filter change from 0 to 0 15:22:47 FLIGetFilterPos err=0 currentPosition=0 15:22:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:47 Filter is already there-color wheel unchanged 15:22:47 Received message from Master: op=Shutter serial=278760 15:22:47 Shutter LASER close 15:22:47 Received message from Camera: op=State serial=278762 15:22:47 GetSingleValue result=40 Value=cccccccc 15:22:47 SkyScan query 15:22:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:48 Parameters OK 15:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:48 Set A/D data flow result=40 15:22:48 Set A/D channel type result=40 15:22:48 Set A/D encoding result=40 15:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:48 Set channel filter=0.000000e+000 result=40 15:22:48 Config A/D Result=40 15:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:48 Get A/D filter: -9.255963e+061 result=40 15:22:48 Get A/D value=-858993460 result=40 15:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:48 Parameters OK 15:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:48 Set A/D data flow result=40 15:22:48 Set A/D channel type result=40 15:22:48 Set A/D encoding result=40 15:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:48 Set channel filter=0.000000e+000 result=40 15:22:48 Config A/D Result=40 15:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:48 Get A/D filter: -9.255963e+061 result=40 15:22:48 Get A/D value=-858993460 result=40 15:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:48 Aux= 15:22:48 Message to Camera, serial 278762 queued 15:23:24 Received message from Master: op=PointingHead serial=278774 15:23:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:23:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:23:24 Point started: ret=0 15:23:24 point_skyscan result=0 15:23:25 Check angles 15:23:25 SkyScan query 15:23:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0009 0009 15:23:26 Msec=0 True Az=112.995 Ze=-171.39 Az status=0009 Ze status=0009 15:23:26 Check angles 15:23:26 SkyScan query 15:23:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:23:26 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:23:26 Message to Master queued w/err=0: serial=278774 error=0 15:23:31 Received message from Master: op=Filter serial=278775 15:23:31 Color wheel filter change from 0 to 0 15:23:31 FLIGetFilterPos err=0 currentPosition=0 15:23:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:31 Filter is already there-color wheel unchanged 15:23:31 Received message from Master: op=Shutter serial=278776 15:23:31 Shutter LASER open 15:23:32 Received message from Camera: op=State serial=278778 15:23:32 GetSingleValue result=40 Value=cccccccc 15:23:32 SkyScan query 15:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:23:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:32 Parameters OK 15:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:32 Set A/D data flow result=40 15:23:32 Set A/D channel type result=40 15:23:32 Set A/D encoding result=40 15:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:32 Set channel filter=0.000000e+000 result=40 15:23:32 Config A/D Result=40 15:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:32 Get A/D filter: -9.255963e+061 result=40 15:23:32 Get A/D value=-858993460 result=40 15:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:32 Parameters OK 15:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:32 Set A/D data flow result=40 15:23:32 Set A/D channel type result=40 15:23:32 Set A/D encoding result=40 15:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:32 Set channel filter=0.000000e+000 result=40 15:23:32 Config A/D Result=40 15:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:32 Get A/D filter: -9.255963e+061 result=40 15:23:32 Get A/D value=-858993460 result=40 15:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:32 Aux= 15:23:32 Message to Camera, serial 278778 queued 15:23:41 Received message from Master: op=Shutter serial=278788 15:23:41 Shutter LASER close 15:23:41 Received message from Master: op=PointingHead serial=278792 15:23:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:23:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:23:42 Point started: ret=0 15:23:42 point_skyscan result=0 15:23:42 Check angles 15:23:42 SkyScan query 15:23:43 SkyScan query done: ret=0 az=136.11<-9074 ze=-142.965<-21531 Statuses=0009 0009 15:23:43 Msec=0 True Az=136.11 Ze=-142.965 Az status=0009 Ze status=0009 15:23:43 Check angles 15:23:43 SkyScan query 15:23:44 SkyScan query done: ret=0 az=153.975<-10265 ze=-121.605<-20107 Statuses=0009 0009 15:23:44 Msec=750 True Az=153.975 Ze=-121.605 Az status=0009 Ze status=0009 15:23:44 Check angles 15:23:44 SkyScan query 15:23:44 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.56<-18704 Statuses=0009 0009 15:23:44 Msec=1500 True Az=171.465 Ze=-100.56 Az status=0009 Ze status=0009 15:23:45 Check angles 15:23:45 SkyScan query 15:23:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.65<-17310 Statuses=0008 0009 15:23:45 Msec=2250 True Az=176.01 Ze=-79.65 Az status=0008 Ze status=0009 15:23:45 Check angles 15:23:45 SkyScan query 15:23:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 15:23:46 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 15:23:46 Check angles 15:23:46 SkyScan query 15:23:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:23:47 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:23:47 Message to Master queued w/err=0: serial=278792 error=0 15:23:52 Received message from Master: op=Filter serial=278793 15:23:52 Color wheel filter change from 0 to 0 15:23:52 FLIGetFilterPos err=0 currentPosition=0 15:23:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:52 Filter is already there-color wheel unchanged 15:23:52 Received message from Master: op=Shutter serial=278794 15:23:52 Shutter LASER close 15:23:52 Received message from Camera: op=State serial=278796 15:23:52 GetSingleValue result=40 Value=cccccccc 15:23:52 SkyScan query 15:23:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:23:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:53 Parameters OK 15:23:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:53 Set A/D data flow result=40 15:23:53 Set A/D channel type result=40 15:23:53 Set A/D encoding result=40 15:23:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:53 Set channel filter=0.000000e+000 result=40 15:23:53 Config A/D Result=40 15:23:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:53 Get A/D filter: -9.255963e+061 result=40 15:23:53 Get A/D value=-858993460 result=40 15:23:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:53 Parameters OK 15:23:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:53 Set A/D data flow result=40 15:23:53 Set A/D channel type result=40 15:23:53 Set A/D encoding result=40 15:23:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:53 Set channel filter=0.000000e+000 result=40 15:23:53 Config A/D Result=40 15:23:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:53 Get A/D filter: -9.255963e+061 result=40 15:23:53 Get A/D value=-858993460 result=40 15:23:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:53 Aux= 15:23:53 Message to Camera, serial 278796 queued 15:24:29 Received message from Master: op=PointingHead serial=278809 15:24:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:24:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:24:30 Point started: ret=0 15:24:30 point_skyscan result=0 15:24:31 Check angles 15:24:31 SkyScan query 15:24:31 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.99<-13466 Statuses=0009 0009 15:24:31 Msec=0 True Az=153.18 Ze=-21.99 Az status=0009 Ze status=0009 15:24:31 Check angles 15:24:31 SkyScan query 15:24:32 SkyScan query done: ret=0 az=135.69<-9046 ze=-0.96<-12064 Statuses=0009 0009 15:24:32 Msec=750 True Az=135.69 Ze=-0.96 Az status=0009 Ze status=0009 15:24:32 Check angles 15:24:32 SkyScan query 15:24:33 SkyScan query done: ret=0 az=118.2<-7880 ze=19.965<-10669 Statuses=0009 0009 15:24:33 Msec=1500 True Az=118.2 Ze=19.965 Az status=0009 Ze status=0009 15:24:33 Check angles 15:24:33 SkyScan query 15:24:33 SkyScan query done: ret=0 az=100.785<-6719 ze=40.95<-9270 Statuses=0009 0009 15:24:33 Msec=2250 True Az=100.785 Ze=40.95 Az status=0009 Ze status=0009 15:24:34 Check angles 15:24:34 SkyScan query 15:24:34 SkyScan query done: ret=0 az=85.965<-5731 ze=51.555<-8563 Statuses=0009 0008 15:24:34 Msec=3000 True Az=85.965 Ze=51.555 Az status=0009 Ze status=0008 15:24:34 Check angles 15:24:34 SkyScan query 15:24:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:24:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:24:35 Message to Master queued w/err=0: serial=278809 error=0 15:24:40 Received message from Master: op=Filter serial=278810 15:24:40 Color wheel filter change from 0 to 0 15:24:40 FLIGetFilterPos err=0 currentPosition=0 15:24:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:40 Filter is already there-color wheel unchanged 15:24:40 Received message from Master: op=Shutter serial=278811 15:24:40 Shutter LASER close 15:24:40 Received message from Camera: op=State serial=278813 15:24:40 GetSingleValue result=40 Value=cccccccc 15:24:40 SkyScan query 15:24:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:24:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:41 Parameters OK 15:24:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:41 Set A/D data flow result=40 15:24:41 Set A/D channel type result=40 15:24:41 Set A/D encoding result=40 15:24:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:41 Set channel filter=0.000000e+000 result=40 15:24:41 Config A/D Result=40 15:24:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:41 Get A/D filter: -9.255963e+061 result=40 15:24:41 Get A/D value=-858993460 result=40 15:24:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:41 Parameters OK 15:24:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:41 Set A/D data flow result=40 15:24:41 Set A/D channel type result=40 15:24:41 Set A/D encoding result=40 15:24:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:41 Set channel filter=0.000000e+000 result=40 15:24:41 Config A/D Result=40 15:24:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:41 Get A/D filter: -9.255963e+061 result=40 15:24:41 Get A/D value=-858993460 result=40 15:24:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:41 Aux= 15:24:41 Message to Camera, serial 278813 queued 15:25:17 Received message from Master: op=PointingHead serial=278826 15:25:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:25:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:25:18 Point started: ret=0 15:25:18 point_skyscan result=0 15:25:19 Check angles 15:25:19 SkyScan query 15:25:19 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 15:25:19 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 15:25:19 Check angles 15:25:19 SkyScan query 15:25:20 SkyScan query done: ret=0 az=126.975<-8465 ze=38.505<-9433 Statuses=0009 0008 15:25:20 Msec=750 True Az=126.975 Ze=38.505 Az status=0009 Ze status=0008 15:25:20 Check angles 15:25:20 SkyScan query 15:25:21 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 15:25:21 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 15:25:21 Check angles 15:25:21 SkyScan query 15:25:21 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 15:25:21 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 15:25:22 Check angles 15:25:22 SkyScan query 15:25:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:25:22 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:25:22 Check angles 15:25:22 SkyScan query 15:25:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:25:23 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:25:23 Message to Master queued w/err=0: serial=278826 error=0 15:25:28 Received message from Master: op=Filter serial=278827 15:25:28 Color wheel filter change from 0 to 0 15:25:28 FLIGetFilterPos err=0 currentPosition=0 15:25:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:28 Filter is already there-color wheel unchanged 15:25:28 Received message from Master: op=Shutter serial=278828 15:25:28 Shutter LASER close 15:25:28 Received message from Camera: op=State serial=278830 15:25:28 GetSingleValue result=40 Value=cccccccc 15:25:28 SkyScan query 15:25:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:25:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:29 Parameters OK 15:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:29 Set A/D data flow result=40 15:25:29 Set A/D channel type result=40 15:25:29 Set A/D encoding result=40 15:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:29 Set channel filter=0.000000e+000 result=40 15:25:29 Config A/D Result=40 15:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:29 Get A/D filter: -9.255963e+061 result=40 15:25:29 Get A/D value=-858993460 result=40 15:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:29 Parameters OK 15:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:29 Set A/D data flow result=40 15:25:29 Set A/D channel type result=40 15:25:29 Set A/D encoding result=40 15:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:29 Set channel filter=0.000000e+000 result=40 15:25:29 Config A/D Result=40 15:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:29 Get A/D filter: -9.255963e+061 result=40 15:25:29 Get A/D value=-858993460 result=40 15:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:29 Aux= 15:25:29 Message to Camera, serial 278830 queued 15:26:06 Received message from Master: op=PointingHead serial=278843 15:26:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:26:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:26:06 Point started: ret=0 15:26:06 point_skyscan result=0 15:26:07 Check angles 15:26:07 SkyScan query 15:26:07 SkyScan query done: ret=0 az=153.195<-10213 ze=8.925<-11405 Statuses=0009 0009 15:26:07 Msec=0 True Az=153.195 Ze=8.925 Az status=0009 Ze status=0009 15:26:07 Check angles 15:26:07 SkyScan query 15:26:08 SkyScan query done: ret=0 az=135.75<-9050 ze=-12.09<-12806 Statuses=0009 0009 15:26:08 Msec=750 True Az=135.75 Ze=-12.09 Az status=0009 Ze status=0009 15:26:08 Check angles 15:26:08 SkyScan query 15:26:09 SkyScan query done: ret=0 az=118.23<-7882 ze=-32.985<-14199 Statuses=0009 0009 15:26:09 Msec=1500 True Az=118.23 Ze=-32.985 Az status=0009 Ze status=0009 15:26:09 Check angles 15:26:09 SkyScan query [UTC 2018-12-19 15:26:10] 15:26:10 SkyScan query done: ret=0 az=100.8<-6720 ze=-51.51<-15434 Statuses=0009 0009 15:26:10 Msec=2250 True Az=100.8 Ze=-51.51 Az status=0009 Ze status=0009 15:26:10 Check angles 15:26:10 SkyScan query 15:26:10 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 15:26:10 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 15:26:10 Check angles 15:26:10 SkyScan query 15:26:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:26:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:26:11 Message to Master queued w/err=0: serial=278843 error=0 15:26:16 Received message from Master: op=Filter serial=278844 15:26:16 Color wheel filter change from 0 to 0 15:26:16 FLIGetFilterPos err=0 currentPosition=0 15:26:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:16 Filter is already there-color wheel unchanged 15:26:16 Received message from Master: op=Shutter serial=278845 15:26:16 Shutter LASER close 15:26:16 Received message from Camera: op=State serial=278847 15:26:16 GetSingleValue result=40 Value=cccccccc 15:26:16 SkyScan query 15:26:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:26:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:17 Parameters OK 15:26:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:17 Set A/D data flow result=40 15:26:17 Set A/D channel type result=40 15:26:17 Set A/D encoding result=40 15:26:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:17 Set channel filter=0.000000e+000 result=40 15:26:17 Config A/D Result=40 15:26:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:17 Get A/D filter: -9.255963e+061 result=40 15:26:17 Get A/D value=-858993460 result=40 15:26:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:17 Parameters OK 15:26:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:17 Set A/D data flow result=40 15:26:17 Set A/D channel type result=40 15:26:17 Set A/D encoding result=40 15:26:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:17 Set channel filter=0.000000e+000 result=40 15:26:17 Config A/D Result=40 15:26:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:17 Get A/D filter: -9.255963e+061 result=40 15:26:17 Get A/D value=-858993460 result=40 15:26:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:26:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:26:17 Aux= 15:26:17 Message to Camera, serial 278847 queued 15:26:54 Received message from Master: op=PointingHead serial=278860 15:26:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:26:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:26:54 Point started: ret=0 15:26:54 point_skyscan result=0 15:26:55 Check angles 15:26:55 SkyScan query 15:26:55 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.75<-17450 Statuses=0009 0009 15:26:55 Msec=0 True Az=109.395 Ze=-81.75 Az status=0009 Ze status=0009 15:26:55 Check angles 15:26:55 SkyScan query 15:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 15:26:56 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 15:26:56 Check angles 15:26:56 SkyScan query 15:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 15:26:57 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 15:26:57 Check angles 15:26:57 SkyScan query 15:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 15:26:58 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 15:26:58 Check angles 15:26:58 SkyScan query 15:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.525<-23035 Statuses=0008 0009 15:26:58 Msec=3000 True Az=112.995 Ze=-165.525 Az status=0008 Ze status=0009 15:26:58 Check angles 15:26:58 SkyScan query 15:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:26:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:26:59 Message to Master queued w/err=0: serial=278860 error=0 15:27:04 Received message from Master: op=Filter serial=278861 15:27:04 Color wheel filter change from 0 to 0 15:27:04 FLIGetFilterPos err=0 currentPosition=0 15:27:04 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:04 Filter is already there-color wheel unchanged 15:27:04 Received message from Master: op=Shutter serial=278862 15:27:04 Shutter LASER open 15:27:04 Received message from Camera: op=State serial=278864 15:27:04 GetSingleValue result=40 Value=cccccccc 15:27:04 SkyScan query 15:27:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:27:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:05 Parameters OK 15:27:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:05 Set A/D data flow result=40 15:27:05 Set A/D channel type result=40 15:27:05 Set A/D encoding result=40 15:27:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:05 Set channel filter=0.000000e+000 result=40 15:27:05 Config A/D Result=40 15:27:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:05 Get A/D filter: -9.255963e+061 result=40 15:27:05 Get A/D value=-858993460 result=40 15:27:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:05 Parameters OK 15:27:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:05 Set A/D data flow result=40 15:27:05 Set A/D channel type result=40 15:27:05 Set A/D encoding result=40 15:27:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:05 Set channel filter=0.000000e+000 result=40 15:27:05 Config A/D Result=40 15:27:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:05 Get A/D filter: -9.255963e+061 result=40 15:27:05 Get A/D value=-858993460 result=40 15:27:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:05 Aux= 15:27:05 Message to Camera, serial 278864 queued 15:27:13 Received message from Master: op=Shutter serial=278874 15:27:13 Shutter LASER close 15:27:14 Received message from Master: op=PointingHead serial=278878 15:27:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:27:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:27:14 Point started: ret=0 15:27:14 point_skyscan result=0 15:27:15 Check angles 15:27:15 SkyScan query 15:27:16 SkyScan query done: ret=0 az=89.835<-5989 ze=157.275<-1515 Statuses=0009 0009 15:27:16 Msec=0 True Az=89.835 Ze=157.275 Az status=0009 Ze status=0009 15:27:16 Check angles 15:27:16 SkyScan query 15:27:16 SkyScan query done: ret=0 az=72.495<-4833 ze=136.29<-2914 Statuses=0009 0009 15:27:16 Msec=750 True Az=72.495 Ze=136.29 Az status=0009 Ze status=0009 15:27:17 Check angles 15:27:17 SkyScan query 15:27:17 SkyScan query done: ret=0 az=55.065<-3671 ze=115.365<-4309 Statuses=0009 0009 15:27:17 Msec=1500 True Az=55.065 Ze=115.365 Az status=0009 Ze status=0009 15:27:17 Check angles 15:27:17 SkyScan query 15:27:18 SkyScan query done: ret=0 az=40.995<-2733 ze=94.395<-5707 Statuses=0009 0009 15:27:18 Msec=2250 True Az=40.995 Ze=94.395 Az status=0009 Ze status=0009 15:27:18 Check angles 15:27:18 SkyScan query 15:27:19 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 15:27:19 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 15:27:19 Check angles 15:27:19 SkyScan query 15:27:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 15:27:19 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 15:27:20 Check angles 15:27:20 SkyScan query 15:27:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:27:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:27:20 Message to Master queued w/err=0: serial=278878 error=0 15:27:25 Received message from Master: op=Filter serial=278879 15:27:25 Color wheel filter change from 0 to 0 15:27:25 FLIGetFilterPos err=0 currentPosition=0 15:27:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:25 Filter is already there-color wheel unchanged 15:27:25 Received message from Master: op=Shutter serial=278880 15:27:25 Shutter LASER close 15:27:25 Received message from Camera: op=State serial=278882 15:27:25 GetSingleValue result=40 Value=cccccccc 15:27:25 SkyScan query 15:27:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:27:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:26 Parameters OK 15:27:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:26 Set A/D data flow result=40 15:27:26 Set A/D channel type result=40 15:27:26 Set A/D encoding result=40 15:27:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:26 Set channel filter=0.000000e+000 result=40 15:27:26 Config A/D Result=40 15:27:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:26 Get A/D filter: -9.255963e+061 result=40 15:27:26 Get A/D value=-858993460 result=40 15:27:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:26 Parameters OK 15:27:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:26 Set A/D data flow result=40 15:27:26 Set A/D channel type result=40 15:27:26 Set A/D encoding result=40 15:27:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:26 Set channel filter=0.000000e+000 result=40 15:27:26 Config A/D Result=40 15:27:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:26 Get A/D filter: -9.255963e+061 result=40 15:27:26 Get A/D value=-858993460 result=40 15:27:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:26 Aux= 15:27:26 Message to Camera, serial 278882 queued 15:28:03 Received message from Master: op=PointingHead serial=278895 15:28:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:28:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:28:03 Point started: ret=0 15:28:03 point_skyscan result=0 15:28:04 Check angles 15:28:04 SkyScan query 15:28:05 SkyScan query done: ret=0 az=63.84<-4256 ze=66.555<-7563 Statuses=0009 0008 15:28:05 Msec=0 True Az=63.84 Ze=66.555 Az status=0009 Ze status=0008 15:28:05 Check angles 15:28:05 SkyScan query 15:28:05 SkyScan query done: ret=0 az=81.645<-5443 ze=66.51<-7566 Statuses=0009 0008 15:28:05 Msec=750 True Az=81.645 Ze=66.51 Az status=0009 Ze status=0008 15:28:06 Check angles 15:28:06 SkyScan query 15:28:06 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 15:28:06 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 15:28:06 Check angles 15:28:06 SkyScan query 15:28:07 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 15:28:07 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 15:28:07 Check angles 15:28:07 SkyScan query 15:28:08 SkyScan query done: ret=0 az=134.46<-8964 ze=66.495<-7567 Statuses=0009 0008 15:28:08 Msec=3000 True Az=134.46 Ze=66.495 Az status=0009 Ze status=0008 15:28:08 Check angles 15:28:08 SkyScan query 15:28:08 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 15:28:08 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 15:28:09 Check angles 15:28:09 SkyScan query 15:28:09 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:28:09 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:28:09 Message to Master queued w/err=0: serial=278895 error=0 15:28:14 Received message from Master: op=Filter serial=278896 15:28:14 Color wheel filter change from 0 to 0 15:28:14 FLIGetFilterPos err=0 currentPosition=0 15:28:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:28:14 Filter is already there-color wheel unchanged 15:28:14 Received message from Master: op=Shutter serial=278897 15:28:14 Shutter LASER close 15:28:14 Received message from Camera: op=State serial=278899 15:28:14 GetSingleValue result=40 Value=cccccccc 15:28:14 SkyScan query 15:28:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:28:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:15 Parameters OK 15:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:15 Set A/D data flow result=40 15:28:15 Set A/D channel type result=40 15:28:15 Set A/D encoding result=40 15:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:15 Set channel filter=0.000000e+000 result=40 15:28:15 Config A/D Result=40 15:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:15 Get A/D filter: -9.255963e+061 result=40 15:28:15 Get A/D value=-858993460 result=40 15:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:15 Parameters OK 15:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:15 Set A/D data flow result=40 15:28:15 Set A/D channel type result=40 15:28:15 Set A/D encoding result=40 15:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:15 Set channel filter=0.000000e+000 result=40 15:28:15 Config A/D Result=40 15:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:15 Get A/D filter: -9.255963e+061 result=40 15:28:15 Get A/D value=-858993460 result=40 15:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:28:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:28:15 Aux= 15:28:15 Message to Camera, serial 278899 queued 15:28:52 Received message from Master: op=PointingHead serial=278912 15:28:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:28:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:28:52 Point started: ret=0 15:28:52 point_skyscan result=0 15:28:53 Check angles 15:28:53 SkyScan query 15:28:53 SkyScan query done: ret=0 az=135.12<-9008 ze=36.96<-9536 Statuses=0009 0009 15:28:53 Msec=0 True Az=135.12 Ze=36.96 Az status=0009 Ze status=0009 15:28:54 Check angles 15:28:54 SkyScan query 15:28:54 SkyScan query done: ret=0 az=117.165<-7811 ze=15.63<-10958 Statuses=0009 0009 15:28:54 Msec=750 True Az=117.165 Ze=15.63 Az status=0009 Ze status=0009 15:28:54 Check angles 15:28:54 SkyScan query 15:28:55 SkyScan query done: ret=0 az=99.51<-6634 ze=-5.82<-12388 Statuses=0009 0009 15:28:55 Msec=1500 True Az=99.51 Ze=-5.82 Az status=0009 Ze status=0009 15:28:55 Check angles 15:28:55 SkyScan query 15:28:56 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.805<-13787 Statuses=0009 0009 15:28:56 Msec=2250 True Az=82.05 Ze=-26.805 Az status=0009 Ze status=0009 15:28:56 Check angles 15:28:56 SkyScan query 15:28:56 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.58<-14572 Statuses=0009 0008 15:28:56 Msec=3000 True Az=64.485 Ze=-38.58 Az status=0009 Ze status=0008 15:28:57 Check angles 15:28:57 SkyScan query 15:28:57 SkyScan query done: ret=0 az=47.055<-3137 ze=-38.52<-14568 Statuses=0009 0008 15:28:57 Msec=3750 True Az=47.055 Ze=-38.52 Az status=0009 Ze status=0008 15:28:57 Check angles 15:28:57 SkyScan query 15:28:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:28:58 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:28:58 Message to Master queued w/err=0: serial=278912 error=0 15:29:03 Received message from Master: op=Filter serial=278913 15:29:03 Color wheel filter change from 0 to 0 15:29:03 FLIGetFilterPos err=0 currentPosition=0 15:29:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:03 Filter is already there-color wheel unchanged 15:29:03 Received message from Master: op=Shutter serial=278914 15:29:03 Shutter LASER close 15:29:03 Received message from Camera: op=State serial=278916 15:29:03 GetSingleValue result=40 Value=cccccccc 15:29:03 SkyScan query 15:29:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:29:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:04 Parameters OK 15:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:04 Set A/D data flow result=40 15:29:04 Set A/D channel type result=40 15:29:04 Set A/D encoding result=40 15:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:04 Set channel filter=0.000000e+000 result=40 15:29:04 Config A/D Result=40 15:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:04 Get A/D filter: -9.255963e+061 result=40 15:29:04 Get A/D value=-858993460 result=40 15:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:04 Parameters OK 15:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:04 Set A/D data flow result=40 15:29:04 Set A/D channel type result=40 15:29:04 Set A/D encoding result=40 15:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:04 Set channel filter=0.000000e+000 result=40 15:29:04 Config A/D Result=40 15:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:04 Get A/D filter: -9.255963e+061 result=40 15:29:04 Get A/D value=-858993460 result=40 15:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:04 Aux= 15:29:04 Message to Camera, serial 278916 queued 15:29:41 Received message from Master: op=PointingHead serial=278929 15:29:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:29:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:29:41 Point started: ret=0 15:29:41 point_skyscan result=0 15:29:42 Check angles 15:29:42 SkyScan query 15:29:42 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.79<-16586 Statuses=0009 0009 15:29:42 Msec=0 True Az=64.41 Ze=-68.79 Az status=0009 Ze status=0009 15:29:42 Check angles 15:29:42 SkyScan query 15:29:43 SkyScan query done: ret=0 az=82.365<-5491 ze=-90.165<-18011 Statuses=0009 0009 15:29:43 Msec=750 True Az=82.365 Ze=-90.165 Az status=0009 Ze status=0009 15:29:43 Check angles 15:29:43 SkyScan query 15:29:44 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.105<-19407 Statuses=0009 0009 15:29:44 Msec=1500 True Az=99.705 Ze=-111.105 Az status=0009 Ze status=0009 15:29:44 Check angles 15:29:44 SkyScan query 15:29:44 SkyScan query done: ret=0 az=117.225<-7815 ze=-132.075<-20805 Statuses=0009 0009 15:29:44 Msec=2250 True Az=117.225 Ze=-132.075 Az status=0009 Ze status=0009 15:29:45 Check angles 15:29:45 SkyScan query 15:29:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 15:29:45 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 15:29:45 Check angles 15:29:45 SkyScan query 15:29:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 15:29:46 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 15:29:46 Message to Master queued w/err=0: serial=278929 error=0 15:29:51 Received message from Master: op=Filter serial=278930 15:29:51 Color wheel filter change from 0 to 0 15:29:51 FLIGetFilterPos err=0 currentPosition=0 15:29:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:51 Filter is already there-color wheel unchanged 15:29:51 Received message from Master: op=Shutter serial=278931 15:29:51 Shutter LASER close 15:29:51 Received message from Camera: op=State serial=278933 15:29:51 GetSingleValue result=40 Value=cccccccc 15:29:51 SkyScan query 15:29:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:29:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:52 Parameters OK 15:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:52 Set A/D data flow result=40 15:29:52 Set A/D channel type result=40 15:29:52 Set A/D encoding result=40 15:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:52 Set channel filter=0.000000e+000 result=40 15:29:52 Config A/D Result=40 15:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:52 Get A/D filter: -9.255963e+061 result=40 15:29:52 Get A/D value=-858993460 result=40 15:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:52 Parameters OK 15:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:52 Set A/D data flow result=40 15:29:52 Set A/D channel type result=40 15:29:52 Set A/D encoding result=40 15:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:52 Set channel filter=0.000000e+000 result=40 15:29:52 Config A/D Result=40 15:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:52 Get A/D filter: -9.255963e+061 result=40 15:29:52 Get A/D value=-858993460 result=40 15:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:52 Aux= 15:29:52 Message to Camera, serial 278933 queued 15:30:29 Received message from Master: op=PointingHead serial=278946 15:30:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:30:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:30:29 Point started: ret=0 15:30:29 point_skyscan result=0 15:30:30 Check angles 15:30:30 SkyScan query 15:30:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 15:30:30 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 15:30:30 Check angles 15:30:30 SkyScan query 15:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:30:31 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:30:31 Message to Master queued w/err=0: serial=278946 error=0 15:30:36 Received message from Master: op=Filter serial=278947 15:30:36 Color wheel filter change from 0 to 0 15:30:36 FLIGetFilterPos err=0 currentPosition=0 15:30:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:36 Filter is already there-color wheel unchanged 15:30:36 Received message from Master: op=Shutter serial=278948 15:30:36 Shutter LASER open 15:30:36 Received message from Camera: op=State serial=278950 15:30:36 GetSingleValue result=40 Value=cccccccc 15:30:36 SkyScan query 15:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:30:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:37 Parameters OK 15:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:37 Set A/D data flow result=40 15:30:37 Set A/D channel type result=40 15:30:37 Set A/D encoding result=40 15:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:37 Set channel filter=0.000000e+000 result=40 15:30:37 Config A/D Result=40 15:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:37 Get A/D filter: -9.255963e+061 result=40 15:30:37 Get A/D value=-858993460 result=40 15:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:37 Parameters OK 15:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:37 Set A/D data flow result=40 15:30:37 Set A/D channel type result=40 15:30:37 Set A/D encoding result=40 15:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:37 Set channel filter=0.000000e+000 result=40 15:30:37 Config A/D Result=40 15:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:37 Get A/D filter: -9.255963e+061 result=40 15:30:37 Get A/D value=-858993460 result=40 15:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:37 Aux= 15:30:37 Message to Camera, serial 278950 queued 15:30:45 Received message from Master: op=Shutter serial=278960 15:30:45 Shutter LASER close 15:30:46 Received message from Master: op=PointingHead serial=278964 15:30:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:30:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:30:46 Point started: ret=0 15:30:46 point_skyscan result=0 15:30:47 Check angles 15:30:47 SkyScan query 15:30:48 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.445<-21563 Statuses=0009 0009 15:30:48 Msec=0 True Az=135.84 Ze=-143.445 Az status=0009 Ze status=0009 15:30:48 Check angles 15:30:48 SkyScan query 15:30:48 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.445<-20163 Statuses=0009 0009 15:30:48 Msec=750 True Az=153.3 Ze=-122.445 Az status=0009 Ze status=0009 15:30:49 Check angles 15:30:49 SkyScan query 15:30:49 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.61<-18774 Statuses=0009 0009 15:30:49 Msec=1500 True Az=170.805 Ze=-101.61 Az status=0009 Ze status=0009 15:30:49 Check angles 15:30:49 SkyScan query 15:30:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.565<-17371 Statuses=0008 0009 15:30:50 Msec=2250 True Az=175.995 Ze=-80.565 Az status=0008 Ze status=0009 15:30:50 Check angles 15:30:50 SkyScan query 15:30:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.64<-15976 Statuses=0008 0009 15:30:51 Msec=3000 True Az=176.01 Ze=-59.64 Az status=0008 Ze status=0009 15:30:51 Check angles 15:30:51 SkyScan query 15:30:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:30:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:30:51 Message to Master queued w/err=0: serial=278964 error=0 15:30:56 Received message from Master: op=Filter serial=278965 15:30:56 Color wheel filter change from 0 to 0 15:30:56 FLIGetFilterPos err=0 currentPosition=0 15:30:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:56 Filter is already there-color wheel unchanged 15:30:57 Received message from Master: op=Shutter serial=278966 15:30:57 Shutter LASER close 15:30:57 Received message from Camera: op=State serial=278968 15:30:57 GetSingleValue result=40 Value=cccccccc 15:30:57 SkyScan query 15:30:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:30:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:57 Parameters OK 15:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:57 Set A/D data flow result=40 15:30:57 Set A/D channel type result=40 15:30:57 Set A/D encoding result=40 15:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:57 Set channel filter=0.000000e+000 result=40 15:30:57 Config A/D Result=40 15:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:57 Get A/D filter: -9.255963e+061 result=40 15:30:57 Get A/D value=-858993460 result=40 15:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:57 Parameters OK 15:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:57 Set A/D data flow result=40 15:30:57 Set A/D channel type result=40 15:30:57 Set A/D encoding result=40 15:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:57 Set channel filter=0.000000e+000 result=40 15:30:57 Config A/D Result=40 15:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:57 Get A/D filter: -9.255963e+061 result=40 15:30:57 Get A/D value=-858993460 result=40 15:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:57 Aux= 15:30:57 Message to Camera, serial 278968 queued 15:31:34 Received message from Master: op=PointingHead serial=278981 15:31:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:31:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:31:35 Point started: ret=0 15:31:35 point_skyscan result=0 15:31:35 Check angles 15:31:35 SkyScan query 15:31:36 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.05<-13470 Statuses=0009 0009 15:31:36 Msec=0 True Az=153.21 Ze=-22.05 Az status=0009 Ze status=0009 15:31:36 Check angles 15:31:36 SkyScan query 15:31:37 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.05<-12070 Statuses=0009 0009 15:31:37 Msec=750 True Az=135.78 Ze=-1.05 Az status=0009 Ze status=0009 15:31:37 Check angles 15:31:37 SkyScan query 15:31:37 SkyScan query done: ret=0 az=118.23<-7882 ze=19.875<-10675 Statuses=0009 0009 15:31:37 Msec=1500 True Az=118.23 Ze=19.875 Az status=0009 Ze status=0009 15:31:38 Check angles 15:31:38 SkyScan query 15:31:38 SkyScan query done: ret=0 az=100.86<-6724 ze=40.89<-9274 Statuses=0009 0009 15:31:38 Msec=2250 True Az=100.86 Ze=40.89 Az status=0009 Ze status=0009 15:31:38 Check angles 15:31:38 SkyScan query 15:31:39 SkyScan query done: ret=0 az=85.95<-5730 ze=51.57<-8562 Statuses=0009 0008 15:31:39 Msec=3000 True Az=85.95 Ze=51.57 Az status=0009 Ze status=0008 15:31:39 Check angles 15:31:39 SkyScan query 15:31:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:31:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:31:40 Message to Master queued w/err=0: serial=278981 error=0 15:31:45 Received message from Master: op=Filter serial=278982 15:31:45 Color wheel filter change from 0 to 0 15:31:45 FLIGetFilterPos err=0 currentPosition=0 15:31:45 FLIGetStepsRemaining err=0 RemainingSteps=0 15:31:45 Filter is already there-color wheel unchanged 15:31:45 Received message from Master: op=Shutter serial=278983 15:31:45 Shutter LASER close 15:31:45 Received message from Camera: op=State serial=278985 15:31:45 GetSingleValue result=40 Value=cccccccc 15:31:45 SkyScan query 15:31:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:31:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:45 Parameters OK 15:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:45 Set A/D data flow result=40 15:31:45 Set A/D channel type result=40 15:31:45 Set A/D encoding result=40 15:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:45 Set channel filter=0.000000e+000 result=40 15:31:45 Config A/D Result=40 15:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:45 Get A/D filter: -9.255963e+061 result=40 15:31:45 Get A/D value=-858993460 result=40 15:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:45 Parameters OK 15:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:45 Set A/D data flow result=40 15:31:45 Set A/D channel type result=40 15:31:45 Set A/D encoding result=40 15:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:45 Set channel filter=0.000000e+000 result=40 15:31:45 Config A/D Result=40 15:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:45 Get A/D filter: -9.255963e+061 result=40 15:31:45 Get A/D value=-858993460 result=40 15:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:31:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:31:45 Aux= 15:31:45 Message to Camera, serial 278985 queued 15:32:22 Received message from Master: op=PointingHead serial=278998 15:32:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:32:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:32:23 Point started: ret=0 15:32:23 point_skyscan result=0 15:32:23 Check angles 15:32:23 SkyScan query 15:32:24 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 15:32:24 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 15:32:24 Check angles 15:32:24 SkyScan query 15:32:25 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 15:32:25 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 15:32:25 Check angles 15:32:25 SkyScan query 15:32:26 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 15:32:26 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 15:32:26 Check angles 15:32:26 SkyScan query 15:32:26 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 15:32:26 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 15:32:26 Check angles 15:32:26 SkyScan query 15:32:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:32:27 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:32:27 Check angles 15:32:27 SkyScan query 15:32:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:32:28 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:32:28 Message to Master queued w/err=0: serial=278998 error=0 15:32:33 Received message from Master: op=Filter serial=278999 15:32:33 Color wheel filter change from 0 to 0 15:32:33 FLIGetFilterPos err=0 currentPosition=0 15:32:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:33 Filter is already there-color wheel unchanged 15:32:33 Received message from Master: op=Shutter serial=279000 15:32:33 Shutter LASER close 15:32:33 Received message from Camera: op=State serial=279002 15:32:33 GetSingleValue result=40 Value=cccccccc 15:32:33 SkyScan query 15:32:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:32:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:34 Parameters OK 15:32:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:34 Set A/D data flow result=40 15:32:34 Set A/D channel type result=40 15:32:34 Set A/D encoding result=40 15:32:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:34 Set channel filter=0.000000e+000 result=40 15:32:34 Config A/D Result=40 15:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:34 Get A/D filter: -9.255963e+061 result=40 15:32:34 Get A/D value=-858993460 result=40 15:32:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:34 Parameters OK 15:32:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:34 Set A/D data flow result=40 15:32:34 Set A/D channel type result=40 15:32:34 Set A/D encoding result=40 15:32:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:34 Set channel filter=0.000000e+000 result=40 15:32:34 Config A/D Result=40 15:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:34 Get A/D filter: -9.255963e+061 result=40 15:32:34 Get A/D value=-858993460 result=40 15:32:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:34 Aux= 15:32:34 Message to Camera, serial 279002 queued 15:33:10 Received message from Master: op=PointingHead serial=279015 15:33:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:33:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:33:11 Point started: ret=0 15:33:11 point_skyscan result=0 15:33:11 Check angles 15:33:11 SkyScan query 15:33:12 SkyScan query done: ret=0 az=152.94<-10196 ze=8.7<-11420 Statuses=0009 0009 15:33:12 Msec=0 True Az=152.94 Ze=8.7 Az status=0009 Ze status=0009 15:33:12 Check angles 15:33:12 SkyScan query 15:33:13 SkyScan query done: ret=0 az=135.555<-9037 ze=-12.24<-12816 Statuses=0009 0009 15:33:13 Msec=750 True Az=135.555 Ze=-12.24 Az status=0009 Ze status=0009 15:33:13 Check angles 15:33:13 SkyScan query 15:33:14 SkyScan query done: ret=0 az=118.05<-7870 ze=-33.195<-14213 Statuses=0009 0009 15:33:14 Msec=1500 True Az=118.05 Ze=-33.195 Az status=0009 Ze status=0009 15:33:14 Check angles 15:33:14 SkyScan query 15:33:14 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.57<-15438 Statuses=0009 0009 15:33:14 Msec=2250 True Az=100.29 Ze=-51.57 Az status=0009 Ze status=0009 15:33:14 Check angles 15:33:14 SkyScan query 15:33:15 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:33:15 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:33:15 Check angles 15:33:15 SkyScan query 15:33:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:33:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:33:16 Message to Master queued w/err=0: serial=279015 error=0 15:33:21 Received message from Master: op=Filter serial=279016 15:33:21 Color wheel filter change from 0 to 0 15:33:21 FLIGetFilterPos err=0 currentPosition=0 15:33:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:33:21 Filter is already there-color wheel unchanged 15:33:21 Received message from Master: op=Shutter serial=279017 15:33:21 Shutter LASER close 15:33:21 Received message from Camera: op=State serial=279019 15:33:21 GetSingleValue result=40 Value=cccccccc 15:33:21 SkyScan query 15:33:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:33:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:22 Parameters OK 15:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:22 Set A/D data flow result=40 15:33:22 Set A/D channel type result=40 15:33:22 Set A/D encoding result=40 15:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:22 Set channel filter=0.000000e+000 result=40 15:33:22 Config A/D Result=40 15:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:22 Get A/D filter: -9.255963e+061 result=40 15:33:22 Get A/D value=-858993460 result=40 15:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:22 Parameters OK 15:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:22 Set A/D data flow result=40 15:33:22 Set A/D channel type result=40 15:33:22 Set A/D encoding result=40 15:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:22 Set channel filter=0.000000e+000 result=40 15:33:22 Config A/D Result=40 15:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:22 Get A/D filter: -9.255963e+061 result=40 15:33:22 Get A/D value=-858993460 result=40 15:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:33:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:33:22 Aux= 15:33:22 Message to Camera, serial 279019 queued 15:33:58 Received message from Master: op=PointingHead serial=279032 15:33:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:33:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:33:59 Point started: ret=0 15:33:59 point_skyscan result=0 15:34:00 Check angles 15:34:00 SkyScan query 15:34:00 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.555<-17437 Statuses=0009 0009 15:34:00 Msec=0 True Az=109.2 Ze=-81.555 Az status=0009 Ze status=0009 15:34:00 Check angles 15:34:00 SkyScan query 15:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.93<-18862 Statuses=0008 0009 15:34:01 Msec=750 True Az=112.995 Ze=-102.93 Az status=0008 Ze status=0009 15:34:01 Check angles 15:34:01 SkyScan query 15:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.915<-20261 Statuses=0008 0009 15:34:02 Msec=1500 True Az=112.995 Ze=-123.915 Az status=0008 Ze status=0009 15:34:02 Check angles 15:34:02 SkyScan query 15:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.78<-21652 Statuses=0008 0009 15:34:02 Msec=2250 True Az=112.995 Ze=-144.78 Az status=0008 Ze status=0009 15:34:03 Check angles 15:34:03 SkyScan query 15:34:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 15:34:03 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 15:34:03 Check angles 15:34:03 SkyScan query 15:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:34:04 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:34:04 Message to Master queued w/err=0: serial=279032 error=0 15:34:09 Received message from Master: op=Filter serial=279033 15:34:09 Color wheel filter change from 0 to 0 15:34:09 FLIGetFilterPos err=0 currentPosition=0 15:34:09 FLIGetStepsRemaining err=0 RemainingSteps=0 15:34:09 Filter is already there-color wheel unchanged 15:34:09 Received message from Master: op=Shutter serial=279034 15:34:09 Shutter LASER open 15:34:09 Received message from Camera: op=State serial=279036 15:34:09 GetSingleValue result=40 Value=cccccccc 15:34:09 SkyScan query 15:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:34:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:10 Parameters OK 15:34:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:10 Set A/D data flow result=40 15:34:10 Set A/D channel type result=40 15:34:10 Set A/D encoding result=40 15:34:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:10 Set channel filter=0.000000e+000 result=40 15:34:10 Config A/D Result=40 15:34:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:10 Get A/D filter: -9.255963e+061 result=40 15:34:10 Get A/D value=-858993460 result=40 15:34:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:10 Parameters OK 15:34:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:10 Set A/D data flow result=40 15:34:10 Set A/D channel type result=40 15:34:10 Set A/D encoding result=40 15:34:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:10 Set channel filter=0.000000e+000 result=40 15:34:10 Config A/D Result=40 15:34:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:10 Get A/D filter: -9.255963e+061 result=40 15:34:10 Get A/D value=-858993460 result=40 15:34:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:34:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:34:10 Aux= 15:34:10 Message to Camera, serial 279036 queued 15:34:18 Received message from Master: op=Shutter serial=279046 15:34:18 Shutter LASER close 15:34:19 Received message from Master: op=PointingHead serial=279050 15:34:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:34:19 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:34:19 Point started: ret=0 15:34:19 point_skyscan result=0 15:34:20 Check angles 15:34:20 SkyScan query 15:34:20 SkyScan query done: ret=0 az=89.64<-5976 ze=156.93<-1538 Statuses=0009 0009 15:34:20 Msec=0 True Az=89.64 Ze=156.93 Az status=0009 Ze status=0009 15:34:21 Check angles 15:34:21 SkyScan query 15:34:21 SkyScan query done: ret=0 az=71.835<-4789 ze=135.555<-2963 Statuses=0009 0009 15:34:21 Msec=750 True Az=71.835 Ze=135.555 Az status=0009 Ze status=0009 15:34:21 Check angles 15:34:21 SkyScan query 15:34:22 SkyScan query done: ret=0 az=54.375<-3625 ze=114.525<-4365 Statuses=0009 0009 15:34:22 Msec=1500 True Az=54.375 Ze=114.525 Az status=0009 Ze status=0009 15:34:22 Check angles 15:34:22 SkyScan query 15:34:23 SkyScan query done: ret=0 az=40.98<-2732 ze=93.615<-5759 Statuses=0009 0009 15:34:23 Msec=2250 True Az=40.98 Ze=93.615 Az status=0009 Ze status=0009 15:34:23 Check angles 15:34:23 SkyScan query 15:34:23 SkyScan query done: ret=0 az=40.995<-2733 ze=72.225<-7185 Statuses=0008 0009 15:34:23 Msec=3000 True Az=40.995 Ze=72.225 Az status=0008 Ze status=0009 15:34:24 Check angles 15:34:24 SkyScan query 15:34:24 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 15:34:24 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 15:34:24 Check angles 15:34:24 SkyScan query 15:34:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:34:25 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:34:25 Message to Master queued w/err=0: serial=279050 error=0 15:34:30 Received message from Master: op=Filter serial=279051 15:34:30 Color wheel filter change from 0 to 0 15:34:30 FLIGetFilterPos err=0 currentPosition=0 15:34:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:34:30 Filter is already there-color wheel unchanged 15:34:30 Received message from Master: op=Shutter serial=279052 15:34:30 Shutter LASER close 15:34:30 Received message from Camera: op=State serial=279054 15:34:30 GetSingleValue result=40 Value=cccccccc 15:34:30 SkyScan query 15:34:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:34:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:31 Parameters OK 15:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:31 Set A/D data flow result=40 15:34:31 Set A/D channel type result=40 15:34:31 Set A/D encoding result=40 15:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:31 Set channel filter=0.000000e+000 result=40 15:34:31 Config A/D Result=40 15:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:31 Get A/D filter: -9.255963e+061 result=40 15:34:31 Get A/D value=-858993460 result=40 15:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:31 Parameters OK 15:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:31 Set A/D data flow result=40 15:34:31 Set A/D channel type result=40 15:34:31 Set A/D encoding result=40 15:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:31 Set channel filter=0.000000e+000 result=40 15:34:31 Config A/D Result=40 15:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:31 Get A/D filter: -9.255963e+061 result=40 15:34:31 Get A/D value=-858993460 result=40 15:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:34:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:34:31 Aux= 15:34:31 Message to Camera, serial 279054 queued 15:35:08 Received message from Master: op=PointingHead serial=279067 15:35:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:35:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:35:08 Point started: ret=0 15:35:08 point_skyscan result=0 15:35:09 Check angles 15:35:09 SkyScan query 15:35:09 SkyScan query done: ret=0 az=63.765<-4251 ze=66.555<-7563 Statuses=0009 0008 15:35:09 Msec=0 True Az=63.765 Ze=66.555 Az status=0009 Ze status=0008 15:35:09 Check angles 15:35:09 SkyScan query 15:35:10 SkyScan query done: ret=0 az=81.135<-5409 ze=66.525<-7565 Statuses=0009 0008 15:35:10 Msec=750 True Az=81.135 Ze=66.525 Az status=0009 Ze status=0008 15:35:10 Check angles 15:35:10 SkyScan query 15:35:11 SkyScan query done: ret=0 az=98.955<-6597 ze=66.51<-7566 Statuses=0009 0008 15:35:11 Msec=1500 True Az=98.955 Ze=66.51 Az status=0009 Ze status=0008 15:35:11 Check angles 15:35:11 SkyScan query 15:35:12 SkyScan query done: ret=0 az=116.55<-7770 ze=66.51<-7566 Statuses=0009 0008 15:35:12 Msec=2250 True Az=116.55 Ze=66.51 Az status=0009 Ze status=0008 15:35:12 Check angles 15:35:12 SkyScan query 15:35:12 SkyScan query done: ret=0 az=133.95<-8930 ze=66.51<-7566 Statuses=0009 0008 15:35:12 Msec=3000 True Az=133.95 Ze=66.51 Az status=0009 Ze status=0008 15:35:12 Check angles 15:35:12 SkyScan query 15:35:13 SkyScan query done: ret=0 az=151.815<-10121 ze=66.51<-7566 Statuses=0009 0008 15:35:13 Msec=3750 True Az=151.815 Ze=66.51 Az status=0009 Ze status=0008 15:35:13 Check angles 15:35:13 SkyScan query 15:35:14 SkyScan query done: ret=0 az=158.025<-10535 ze=66.51<-7566 Statuses=0008 0008 15:35:14 Msec=4500 True Az=158.025 Ze=66.51 Az status=0008 Ze status=0008 15:35:14 Message to Master queued w/err=0: serial=279067 error=0 15:35:19 Received message from Master: op=Filter serial=279068 15:35:19 Color wheel filter change from 0 to 0 15:35:19 FLIGetFilterPos err=0 currentPosition=0 15:35:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:35:19 Filter is already there-color wheel unchanged 15:35:19 Received message from Master: op=Shutter serial=279069 15:35:19 Shutter LASER close 15:35:19 Received message from Camera: op=State serial=279071 15:35:19 GetSingleValue result=40 Value=cccccccc 15:35:19 SkyScan query 15:35:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 15:35:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:20 Parameters OK 15:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:20 Set A/D data flow result=40 15:35:20 Set A/D channel type result=40 15:35:20 Set A/D encoding result=40 15:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:20 Set channel filter=0.000000e+000 result=40 15:35:20 Config A/D Result=40 15:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:20 Get A/D filter: -9.255963e+061 result=40 15:35:20 Get A/D value=-858993460 result=40 15:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:20 Parameters OK 15:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:20 Set A/D data flow result=40 15:35:20 Set A/D channel type result=40 15:35:20 Set A/D encoding result=40 15:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:20 Set channel filter=0.000000e+000 result=40 15:35:20 Config A/D Result=40 15:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:20 Get A/D filter: -9.255963e+061 result=40 15:35:20 Get A/D value=-858993460 result=40 15:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:35:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:35:20 Aux= 15:35:20 Message to Camera, serial 279071 queued [UTC 2018-12-19 15:35:52] 15:35:56 Received message from Master: op=PointingHead serial=279084 15:35:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:35:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:35:57 Point started: ret=0 15:35:57 point_skyscan result=0 15:35:58 Check angles 15:35:58 SkyScan query 15:35:58 SkyScan query done: ret=0 az=135.06<-9004 ze=36.75<-9550 Statuses=0009 0009 15:35:58 Msec=0 True Az=135.06 Ze=36.75 Az status=0009 Ze status=0009 15:35:58 Check angles 15:35:58 SkyScan query 15:35:59 SkyScan query done: ret=0 az=117.57<-7838 ze=15.81<-10946 Statuses=0009 0009 15:35:59 Msec=750 True Az=117.57 Ze=15.81 Az status=0009 Ze status=0009 15:35:59 Check angles 15:35:59 SkyScan query 15:36:00 SkyScan query done: ret=0 az=99.735<-6649 ze=-5.58<-12372 Statuses=0009 0009 15:36:00 Msec=1500 True Az=99.735 Ze=-5.58 Az status=0009 Ze status=0009 15:36:00 Check angles 15:36:00 SkyScan query 15:36:00 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.565<-13771 Statuses=0009 0009 15:36:00 Msec=2250 True Az=82.275 Ze=-26.565 Az status=0009 Ze status=0009 15:36:01 Check angles 15:36:01 SkyScan query 15:36:01 SkyScan query done: ret=0 az=64.71<-4314 ze=-38.58<-14572 Statuses=0009 0008 15:36:01 Msec=3000 True Az=64.71 Ze=-38.58 Az status=0009 Ze status=0008 15:36:01 Check angles 15:36:01 SkyScan query 15:36:02 SkyScan query done: ret=0 az=47.31<-3154 ze=-38.52<-14568 Statuses=0009 0008 15:36:02 Msec=3750 True Az=47.31 Ze=-38.52 Az status=0009 Ze status=0008 15:36:02 Check angles 15:36:02 SkyScan query 15:36:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:36:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:36:03 Message to Master queued w/err=0: serial=279084 error=0 15:36:08 Received message from Master: op=Filter serial=279085 15:36:08 Color wheel filter change from 0 to 0 15:36:08 FLIGetFilterPos err=0 currentPosition=0 15:36:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:08 Filter is already there-color wheel unchanged 15:36:08 Received message from Master: op=Shutter serial=279086 15:36:08 Shutter LASER close 15:36:08 Received message from Camera: op=State serial=279088 15:36:08 GetSingleValue result=40 Value=cccccccc 15:36:08 SkyScan query 15:36:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:36:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:08 Parameters OK 15:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:08 Set A/D data flow result=40 15:36:08 Set A/D channel type result=40 15:36:08 Set A/D encoding result=40 15:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:08 Set channel filter=0.000000e+000 result=40 15:36:08 Config A/D Result=40 15:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:08 Get A/D filter: -9.255963e+061 result=40 15:36:08 Get A/D value=-858993460 result=40 15:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:08 Parameters OK 15:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:08 Set A/D data flow result=40 15:36:08 Set A/D channel type result=40 15:36:08 Set A/D encoding result=40 15:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:08 Set channel filter=0.000000e+000 result=40 15:36:08 Config A/D Result=40 15:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:08 Get A/D filter: -9.255963e+061 result=40 15:36:08 Get A/D value=-858993460 result=40 15:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:08 Aux= 15:36:08 Message to Camera, serial 279088 queued 15:36:45 Received message from Master: op=PointingHead serial=279101 15:36:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:36:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:36:46 Point started: ret=0 15:36:46 point_skyscan result=0 15:36:46 Check angles 15:36:46 SkyScan query 15:36:47 SkyScan query done: ret=0 az=63.78<-4252 ze=-67.995<-16533 Statuses=0009 0009 15:36:47 Msec=0 True Az=63.78 Ze=-67.995 Az status=0009 Ze status=0009 15:36:47 Check angles 15:36:47 SkyScan query 15:36:48 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.46<-17964 Statuses=0009 0009 15:36:48 Msec=750 True Az=81.585 Ze=-89.46 Az status=0009 Ze status=0009 15:36:48 Check angles 15:36:48 SkyScan query 15:36:48 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.385<-19359 Statuses=0009 0009 15:36:48 Msec=1500 True Az=99.195 Ze=-110.385 Az status=0009 Ze status=0009 15:36:49 Check angles 15:36:49 SkyScan query 15:36:49 SkyScan query done: ret=0 az=116.415<-7761 ze=-131.355<-20757 Statuses=0009 0009 15:36:49 Msec=2250 True Az=116.415 Ze=-131.355 Az status=0009 Ze status=0009 15:36:49 Check angles 15:36:49 SkyScan query 15:36:50 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 15:36:50 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 15:36:50 Check angles 15:36:50 SkyScan query 15:36:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 15:36:51 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 15:36:51 Message to Master queued w/err=0: serial=279101 error=0 15:36:56 Received message from Master: op=Filter serial=279102 15:36:56 Color wheel filter change from 0 to 0 15:36:56 FLIGetFilterPos err=0 currentPosition=0 15:36:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:56 Filter is already there-color wheel unchanged 15:36:56 Received message from Master: op=Shutter serial=279103 15:36:56 Shutter LASER close 15:36:56 Received message from Camera: op=State serial=279105 15:36:56 GetSingleValue result=40 Value=cccccccc 15:36:56 SkyScan query 15:36:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:36:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:57 Parameters OK 15:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:57 Set A/D data flow result=40 15:36:57 Set A/D channel type result=40 15:36:57 Set A/D encoding result=40 15:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:57 Set channel filter=0.000000e+000 result=40 15:36:57 Config A/D Result=40 15:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:57 Get A/D filter: -9.255963e+061 result=40 15:36:57 Get A/D value=-858993460 result=40 15:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:57 Parameters OK 15:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:57 Set A/D data flow result=40 15:36:57 Set A/D channel type result=40 15:36:57 Set A/D encoding result=40 15:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:57 Set channel filter=0.000000e+000 result=40 15:36:57 Config A/D Result=40 15:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:57 Get A/D filter: -9.255963e+061 result=40 15:36:57 Get A/D value=-858993460 result=40 15:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:57 Aux= 15:36:57 Message to Camera, serial 279105 queued 15:37:32 Received message from Master: op=PointingHead serial=279117 15:37:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:37:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:37:33 Point started: ret=0 15:37:33 point_skyscan result=0 15:37:34 Check angles 15:37:34 SkyScan query 15:37:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.51<-23434 Statuses=0009 0009 15:37:34 Msec=0 True Az=113.01 Ze=-171.51 Az status=0009 Ze status=0009 15:37:34 Check angles 15:37:34 SkyScan query 15:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:37:35 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:37:35 Message to Master queued w/err=0: serial=279117 error=0 15:37:40 Received message from Master: op=Filter serial=279118 15:37:40 Color wheel filter change from 0 to 0 15:37:40 FLIGetFilterPos err=0 currentPosition=0 15:37:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:37:40 Filter is already there-color wheel unchanged 15:37:40 Received message from Master: op=Shutter serial=279119 15:37:40 Shutter LASER open 15:37:40 Received message from Camera: op=State serial=279121 15:37:40 GetSingleValue result=40 Value=cccccccc 15:37:40 SkyScan query 15:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:37:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:41 Parameters OK 15:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:41 Set A/D data flow result=40 15:37:41 Set A/D channel type result=40 15:37:41 Set A/D encoding result=40 15:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:41 Set channel filter=0.000000e+000 result=40 15:37:41 Config A/D Result=40 15:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:41 Get A/D filter: -9.255963e+061 result=40 15:37:41 Get A/D value=-858993460 result=40 15:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:41 Parameters OK 15:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:41 Set A/D data flow result=40 15:37:41 Set A/D channel type result=40 15:37:41 Set A/D encoding result=40 15:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:41 Set channel filter=0.000000e+000 result=40 15:37:41 Config A/D Result=40 15:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:41 Get A/D filter: -9.255963e+061 result=40 15:37:41 Get A/D value=-858993460 result=40 15:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:37:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:37:41 Aux= 15:37:41 Message to Camera, serial 279121 queued 15:37:49 Received message from Master: op=Shutter serial=279131 15:37:49 Shutter LASER close 15:37:50 Received message from Master: op=PointingHead serial=279135 15:37:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:37:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:37:50 Point started: ret=0 15:37:50 point_skyscan result=0 15:37:51 Check angles 15:37:51 SkyScan query 15:37:52 SkyScan query done: ret=0 az=136.335<-9089 ze=-142.89<-21526 Statuses=0009 0009 15:37:52 Msec=0 True Az=136.335 Ze=-142.89 Az status=0009 Ze status=0009 15:37:52 Check angles 15:37:52 SkyScan query 15:37:52 SkyScan query done: ret=0 az=153.72<-10248 ze=-121.95<-20130 Statuses=0009 0009 15:37:52 Msec=750 True Az=153.72 Ze=-121.95 Az status=0009 Ze status=0009 15:37:52 Check angles 15:37:52 SkyScan query 15:37:53 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.935<-18729 Statuses=0009 0009 15:37:53 Msec=1500 True Az=171.225 Ze=-100.935 Az status=0009 Ze status=0009 15:37:53 Check angles 15:37:53 SkyScan query 15:37:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.04<-17336 Statuses=0008 0009 15:37:54 Msec=2250 True Az=176.01 Ze=-80.04 Az status=0008 Ze status=0009 15:37:54 Check angles 15:37:54 SkyScan query 15:37:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.055<-15937 Statuses=0008 0009 15:37:55 Msec=3000 True Az=176.01 Ze=-59.055 Az status=0008 Ze status=0009 15:37:55 Check angles 15:37:55 SkyScan query 15:37:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:37:55 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:37:55 Message to Master queued w/err=0: serial=279135 error=0 15:38:00 Received message from Master: op=Filter serial=279136 15:38:00 Color wheel filter change from 0 to 0 15:38:00 FLIGetFilterPos err=0 currentPosition=0 15:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:38:00 Filter is already there-color wheel unchanged 15:38:00 Received message from Master: op=Shutter serial=279137 15:38:00 Shutter LASER close 15:38:01 Received message from Camera: op=State serial=279139 15:38:01 GetSingleValue result=40 Value=cccccccc 15:38:01 SkyScan query 15:38:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:01 Parameters OK 15:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:01 Set A/D data flow result=40 15:38:01 Set A/D channel type result=40 15:38:01 Set A/D encoding result=40 15:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:01 Set channel filter=0.000000e+000 result=40 15:38:01 Config A/D Result=40 15:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:01 Get A/D filter: -9.255963e+061 result=40 15:38:01 Get A/D value=-858993460 result=40 15:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:01 Parameters OK 15:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:01 Set A/D data flow result=40 15:38:01 Set A/D channel type result=40 15:38:01 Set A/D encoding result=40 15:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:01 Set channel filter=0.000000e+000 result=40 15:38:01 Config A/D Result=40 15:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:01 Get A/D filter: -9.255963e+061 result=40 15:38:01 Get A/D value=-858993460 result=40 15:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:38:01 Aux= 15:38:01 Message to Camera, serial 279139 queued 15:38:38 Received message from Master: op=PointingHead serial=279152 15:38:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:38:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:38:38 Point started: ret=0 15:38:38 point_skyscan result=0 15:38:39 Check angles 15:38:39 SkyScan query 15:38:40 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.855<-13457 Statuses=0009 0009 15:38:40 Msec=0 True Az=153.12 Ze=-21.855 Az status=0009 Ze status=0009 15:38:40 Check angles 15:38:40 SkyScan query 15:38:40 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.42<-12028 Statuses=0009 0009 15:38:40 Msec=750 True Az=135.135 Ze=-0.42 Az status=0009 Ze status=0009 15:38:41 Check angles 15:38:41 SkyScan query 15:38:41 SkyScan query done: ret=0 az=117.765<-7851 ze=20.55<-10630 Statuses=0009 0009 15:38:41 Msec=1500 True Az=117.765 Ze=20.55 Az status=0009 Ze status=0009 15:38:41 Check angles 15:38:41 SkyScan query 15:38:42 SkyScan query done: ret=0 az=100.245<-6683 ze=41.505<-9233 Statuses=0009 0009 15:38:42 Msec=2250 True Az=100.245 Ze=41.505 Az status=0009 Ze status=0009 15:38:42 Check angles 15:38:42 SkyScan query 15:38:43 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:38:43 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:38:43 Check angles 15:38:43 SkyScan query 15:38:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:38:44 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:38:44 Message to Master queued w/err=0: serial=279152 error=0 15:38:49 Received message from Master: op=Filter serial=279153 15:38:49 Color wheel filter change from 0 to 0 15:38:49 FLIGetFilterPos err=0 currentPosition=0 15:38:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:38:49 Filter is already there-color wheel unchanged 15:38:49 Received message from Master: op=Shutter serial=279154 15:38:49 Shutter LASER close 15:38:49 Received message from Camera: op=State serial=279156 15:38:49 GetSingleValue result=40 Value=cccccccc 15:38:49 SkyScan query 15:38:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:38:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:49 Parameters OK 15:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:49 Set A/D data flow result=40 15:38:49 Set A/D channel type result=40 15:38:49 Set A/D encoding result=40 15:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:49 Set channel filter=0.000000e+000 result=40 15:38:49 Config A/D Result=40 15:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:49 Get A/D filter: -9.255963e+061 result=40 15:38:49 Get A/D value=-858993460 result=40 15:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:49 Parameters OK 15:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:49 Set A/D data flow result=40 15:38:49 Set A/D channel type result=40 15:38:49 Set A/D encoding result=40 15:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:49 Set channel filter=0.000000e+000 result=40 15:38:49 Config A/D Result=40 15:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:49 Get A/D filter: -9.255963e+061 result=40 15:38:49 Get A/D value=-858993460 result=40 15:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:38:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:38:49 Aux= 15:38:49 Message to Camera, serial 279156 queued 15:39:26 Received message from Master: op=PointingHead serial=279169 15:39:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:39:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:39:26 Point started: ret=0 15:39:26 point_skyscan result=0 15:39:27 Check angles 15:39:27 SkyScan query 15:39:28 SkyScan query done: ret=0 az=109.41<-7294 ze=38.49<-9434 Statuses=0009 0008 15:39:28 Msec=0 True Az=109.41 Ze=38.49 Az status=0009 Ze status=0008 15:39:28 Check angles 15:39:28 SkyScan query 15:39:29 SkyScan query done: ret=0 az=127.17<-8478 ze=38.505<-9433 Statuses=0009 0008 15:39:29 Msec=750 True Az=127.17 Ze=38.505 Az status=0009 Ze status=0008 15:39:29 Check angles 15:39:29 SkyScan query 15:39:29 SkyScan query done: ret=0 az=144.645<-9643 ze=38.505<-9433 Statuses=0009 0008 15:39:29 Msec=1500 True Az=144.645 Ze=38.505 Az status=0009 Ze status=0008 15:39:30 Check angles 15:39:30 SkyScan query 15:39:30 SkyScan query done: ret=0 az=162.165<-10811 ze=38.505<-9433 Statuses=0009 0008 15:39:30 Msec=2250 True Az=162.165 Ze=38.505 Az status=0009 Ze status=0008 15:39:30 Check angles 15:39:30 SkyScan query 15:39:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:39:31 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:39:31 Check angles 15:39:31 SkyScan query 15:39:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:39:32 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:39:32 Message to Master queued w/err=0: serial=279169 error=0 15:39:37 Received message from Master: op=Filter serial=279170 15:39:37 Color wheel filter change from 0 to 0 15:39:37 FLIGetFilterPos err=0 currentPosition=0 15:39:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:39:37 Filter is already there-color wheel unchanged 15:39:37 Received message from Master: op=Shutter serial=279171 15:39:37 Shutter LASER close 15:39:37 Received message from Camera: op=State serial=279173 15:39:37 GetSingleValue result=40 Value=cccccccc 15:39:37 SkyScan query 15:39:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:39:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:37 Parameters OK 15:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:37 Set A/D data flow result=40 15:39:37 Set A/D channel type result=40 15:39:37 Set A/D encoding result=40 15:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:37 Set channel filter=0.000000e+000 result=40 15:39:37 Config A/D Result=40 15:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:37 Get A/D filter: -9.255963e+061 result=40 15:39:37 Get A/D value=-858993460 result=40 15:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:37 Parameters OK 15:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:37 Set A/D data flow result=40 15:39:37 Set A/D channel type result=40 15:39:37 Set A/D encoding result=40 15:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:37 Set channel filter=0.000000e+000 result=40 15:39:37 Config A/D Result=40 15:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:37 Get A/D filter: -9.255963e+061 result=40 15:39:37 Get A/D value=-858993460 result=40 15:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:39:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:39:37 Aux= 15:39:37 Message to Camera, serial 279173 queued 15:40:14 Received message from Master: op=PointingHead serial=279186 15:40:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:40:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:40:15 Point started: ret=0 15:40:15 point_skyscan result=0 15:40:15 Check angles 15:40:15 SkyScan query 15:40:16 SkyScan query done: ret=0 az=152.685<-10179 ze=8.31<-11446 Statuses=0009 0009 15:40:16 Msec=0 True Az=152.685 Ze=8.31 Az status=0009 Ze status=0009 15:40:16 Check angles 15:40:16 SkyScan query 15:40:17 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.585<-12839 Statuses=0009 0009 15:40:17 Msec=750 True Az=135.21 Ze=-12.585 Az status=0009 Ze status=0009 15:40:17 Check angles 15:40:17 SkyScan query 15:40:17 SkyScan query done: ret=0 az=117.495<-7833 ze=-34.095<-14273 Statuses=0009 0009 15:40:17 Msec=1500 True Az=117.495 Ze=-34.095 Az status=0009 Ze status=0009 15:40:18 Check angles 15:40:18 SkyScan query 15:40:18 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.57<-15438 Statuses=0009 0009 15:40:18 Msec=2250 True Az=100.29 Ze=-51.57 Az status=0009 Ze status=0009 15:40:18 Check angles 15:40:18 SkyScan query 15:40:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:40:19 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:40:19 Check angles 15:40:19 SkyScan query 15:40:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:40:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:40:20 Message to Master queued w/err=0: serial=279186 error=0 15:40:25 Received message from Master: op=Filter serial=279187 15:40:25 Color wheel filter change from 0 to 0 15:40:25 FLIGetFilterPos err=0 currentPosition=0 15:40:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:40:25 Filter is already there-color wheel unchanged 15:40:25 Received message from Master: op=Shutter serial=279188 15:40:25 Shutter LASER close 15:40:25 Received message from Camera: op=State serial=279190 15:40:25 GetSingleValue result=40 Value=cccccccc 15:40:25 SkyScan query 15:40:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:40:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:25 Parameters OK 15:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:25 Set A/D data flow result=40 15:40:25 Set A/D channel type result=40 15:40:25 Set A/D encoding result=40 15:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:25 Set channel filter=0.000000e+000 result=40 15:40:25 Config A/D Result=40 15:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:25 Get A/D filter: -9.255963e+061 result=40 15:40:25 Get A/D value=-858993460 result=40 15:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:25 Parameters OK 15:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:25 Set A/D data flow result=40 15:40:25 Set A/D channel type result=40 15:40:25 Set A/D encoding result=40 15:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:25 Set channel filter=0.000000e+000 result=40 15:40:25 Config A/D Result=40 15:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:25 Get A/D filter: -9.255963e+061 result=40 15:40:25 Get A/D value=-858993460 result=40 15:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:40:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:40:25 Aux= 15:40:25 Message to Camera, serial 279190 queued 15:41:02 Received message from Master: op=PointingHead serial=279203 15:41:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:41:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:41:03 Point started: ret=0 15:41:03 point_skyscan result=0 15:41:03 Check angles 15:41:03 SkyScan query 15:41:04 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.72<-17448 Statuses=0009 0009 15:41:04 Msec=0 True Az=109.395 Ze=-81.72 Az status=0009 Ze status=0009 15:41:04 Check angles 15:41:04 SkyScan query 15:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 15:41:05 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 15:41:05 Check angles 15:41:05 SkyScan query 15:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.005<-20267 Statuses=0008 0009 15:41:05 Msec=1500 True Az=112.995 Ze=-124.005 Az status=0008 Ze status=0009 15:41:06 Check angles 15:41:06 SkyScan query 15:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.915<-21661 Statuses=0008 0009 15:41:06 Msec=2250 True Az=112.995 Ze=-144.915 Az status=0008 Ze status=0009 15:41:06 Check angles 15:41:06 SkyScan query 15:41:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.9<-23060 Statuses=0008 0009 15:41:07 Msec=3000 True Az=112.995 Ze=-165.9 Az status=0008 Ze status=0009 15:41:07 Check angles 15:41:07 SkyScan query 15:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:41:08 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:41:08 Message to Master queued w/err=0: serial=279203 error=0 15:41:13 Received message from Master: op=Filter serial=279204 15:41:13 Color wheel filter change from 0 to 0 15:41:13 FLIGetFilterPos err=0 currentPosition=0 15:41:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:41:13 Filter is already there-color wheel unchanged 15:41:13 Received message from Master: op=Shutter serial=279205 15:41:13 Shutter LASER open 15:41:13 Received message from Camera: op=State serial=279207 15:41:13 GetSingleValue result=40 Value=cccccccc 15:41:13 SkyScan query 15:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:41:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:14 Parameters OK 15:41:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:14 Set A/D data flow result=40 15:41:14 Set A/D channel type result=40 15:41:14 Set A/D encoding result=40 15:41:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:14 Set channel filter=0.000000e+000 result=40 15:41:14 Config A/D Result=40 15:41:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:14 Get A/D filter: -9.255963e+061 result=40 15:41:14 Get A/D value=-858993460 result=40 15:41:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:14 Parameters OK 15:41:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:14 Set A/D data flow result=40 15:41:14 Set A/D channel type result=40 15:41:14 Set A/D encoding result=40 15:41:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:14 Set channel filter=0.000000e+000 result=40 15:41:14 Config A/D Result=40 15:41:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:14 Get A/D filter: -9.255963e+061 result=40 15:41:14 Get A/D value=-858993460 result=40 15:41:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:41:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:41:14 Aux= 15:41:14 Message to Camera, serial 279207 queued 15:41:22 Received message from Master: op=Shutter serial=279217 15:41:22 Shutter LASER close 15:41:23 Received message from Master: op=PointingHead serial=279221 15:41:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:41:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:41:23 Point started: ret=0 15:41:23 point_skyscan result=0 15:41:24 Check angles 15:41:24 SkyScan query 15:41:24 SkyScan query done: ret=0 az=89.595<-5973 ze=156.87<-1542 Statuses=0009 0009 15:41:24 Msec=0 True Az=89.595 Ze=156.87 Az status=0009 Ze status=0009 15:41:24 Check angles 15:41:24 SkyScan query 15:41:25 SkyScan query done: ret=0 az=72.105<-4807 ze=135.945<-2937 Statuses=0009 0009 15:41:25 Msec=750 True Az=72.105 Ze=135.945 Az status=0009 Ze status=0009 15:41:25 Check angles 15:41:25 SkyScan query 15:41:26 SkyScan query done: ret=0 az=54.375<-3625 ze=114.48<-4368 Statuses=0009 0009 15:41:26 Msec=1500 True Az=54.375 Ze=114.48 Az status=0009 Ze status=0009 15:41:26 Check angles 15:41:26 SkyScan query 15:41:27 SkyScan query done: ret=0 az=40.98<-2732 ze=93.12<-5792 Statuses=0009 0009 15:41:27 Msec=2250 True Az=40.98 Ze=93.12 Az status=0009 Ze status=0009 15:41:27 Check angles 15:41:27 SkyScan query 15:41:27 SkyScan query done: ret=0 az=40.995<-2733 ze=71.775<-7215 Statuses=0008 0009 15:41:27 Msec=3000 True Az=40.995 Ze=71.775 Az status=0008 Ze status=0009 15:41:28 Check angles 15:41:28 SkyScan query 15:41:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.96<-8536 Statuses=0008 0009 15:41:28 Msec=3750 True Az=40.995 Ze=51.96 Az status=0008 Ze status=0009 15:41:28 Check angles 15:41:28 SkyScan query 15:41:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:41:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:41:29 Message to Master queued w/err=0: serial=279221 error=0 15:41:34 Received message from Master: op=Filter serial=279222 15:41:34 Color wheel filter change from 0 to 0 15:41:34 FLIGetFilterPos err=0 currentPosition=0 15:41:34 FLIGetStepsRemaining err=0 RemainingSteps=0 15:41:34 Filter is already there-color wheel unchanged 15:41:34 Received message from Master: op=Shutter serial=279223 15:41:34 Shutter LASER close 15:41:34 Received message from Camera: op=State serial=279225 15:41:34 GetSingleValue result=40 Value=cccccccc 15:41:34 SkyScan query 15:41:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:41:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:35 Parameters OK 15:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:35 Set A/D data flow result=40 15:41:35 Set A/D channel type result=40 15:41:35 Set A/D encoding result=40 15:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:35 Set channel filter=0.000000e+000 result=40 15:41:35 Config A/D Result=40 15:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:35 Get A/D filter: -9.255963e+061 result=40 15:41:35 Get A/D value=-858993460 result=40 15:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:35 Parameters OK 15:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:35 Set A/D data flow result=40 15:41:35 Set A/D channel type result=40 15:41:35 Set A/D encoding result=40 15:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:35 Set channel filter=0.000000e+000 result=40 15:41:35 Config A/D Result=40 15:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:35 Get A/D filter: -9.255963e+061 result=40 15:41:35 Get A/D value=-858993460 result=40 15:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:41:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:41:35 Aux= 15:41:35 Message to Camera, serial 279225 queued 15:42:12 Received message from Master: op=PointingHead serial=279238 15:42:12 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:42:12 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:42:12 Point started: ret=0 15:42:12 point_skyscan result=0 15:42:13 Check angles 15:42:13 SkyScan query 15:42:13 SkyScan query done: ret=0 az=64.395<-4293 ze=66.54<-7564 Statuses=0009 0008 15:42:13 Msec=0 True Az=64.395 Ze=66.54 Az status=0009 Ze status=0008 15:42:13 Check angles 15:42:13 SkyScan query 15:42:14 SkyScan query done: ret=0 az=81.945<-5463 ze=66.51<-7566 Statuses=0009 0008 15:42:14 Msec=750 True Az=81.945 Ze=66.51 Az status=0009 Ze status=0008 15:42:14 Check angles 15:42:14 SkyScan query 15:42:15 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 15:42:15 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 15:42:15 Check angles 15:42:15 SkyScan query 15:42:16 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 15:42:16 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 15:42:16 Check angles 15:42:16 SkyScan query 15:42:16 SkyScan query done: ret=0 az=134.205<-8947 ze=66.495<-7567 Statuses=0009 0008 15:42:16 Msec=3000 True Az=134.205 Ze=66.495 Az status=0009 Ze status=0008 15:42:16 Check angles 15:42:16 SkyScan query 15:42:17 SkyScan query done: ret=0 az=151.65<-10110 ze=66.495<-7567 Statuses=0009 0008 15:42:17 Msec=3750 True Az=151.65 Ze=66.495 Az status=0009 Ze status=0008 15:42:17 Check angles 15:42:17 SkyScan query 15:42:18 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:42:18 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:42:18 Message to Master queued w/err=0: serial=279238 error=0 15:42:23 Received message from Master: op=Filter serial=279239 15:42:23 Color wheel filter change from 0 to 0 15:42:23 FLIGetFilterPos err=0 currentPosition=0 15:42:23 FLIGetStepsRemaining err=0 RemainingSteps=0 15:42:23 Filter is already there-color wheel unchanged 15:42:23 Received message from Master: op=Shutter serial=279240 15:42:23 Shutter LASER close 15:42:23 Received message from Camera: op=State serial=279242 15:42:23 GetSingleValue result=40 Value=cccccccc 15:42:23 SkyScan query 15:42:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:42:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:24 Parameters OK 15:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:24 Set A/D data flow result=40 15:42:24 Set A/D channel type result=40 15:42:24 Set A/D encoding result=40 15:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:24 Set channel filter=0.000000e+000 result=40 15:42:24 Config A/D Result=40 15:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:24 Get A/D filter: -9.255963e+061 result=40 15:42:24 Get A/D value=-858993460 result=40 15:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:24 Parameters OK 15:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:24 Set A/D data flow result=40 15:42:24 Set A/D channel type result=40 15:42:24 Set A/D encoding result=40 15:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:24 Set channel filter=0.000000e+000 result=40 15:42:24 Config A/D Result=40 15:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:24 Get A/D filter: -9.255963e+061 result=40 15:42:24 Get A/D value=-858993460 result=40 15:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:24 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:42:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:42:24 Aux= 15:42:24 Message to Camera, serial 279242 queued 15:43:00 Received message from Master: op=PointingHead serial=279255 15:43:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:43:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:43:01 Point started: ret=0 15:43:01 point_skyscan result=0 15:43:02 Check angles 15:43:02 SkyScan query 15:43:02 SkyScan query done: ret=0 az=134.79<-8986 ze=36.6<-9560 Statuses=0009 0009 15:43:02 Msec=0 True Az=134.79 Ze=36.6 Az status=0009 Ze status=0009 15:43:02 Check angles 15:43:02 SkyScan query 15:43:03 SkyScan query done: ret=0 az=117.375<-7825 ze=15.66<-10956 Statuses=0009 0009 15:43:03 Msec=750 True Az=117.375 Ze=15.66 Az status=0009 Ze status=0009 15:43:03 Check angles 15:43:03 SkyScan query 15:43:04 SkyScan query done: ret=0 az=99.525<-6635 ze=-5.79<-12386 Statuses=0009 0009 15:43:04 Msec=1500 True Az=99.525 Ze=-5.79 Az status=0009 Ze status=0009 15:43:04 Check angles 15:43:04 SkyScan query 15:43:04 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.76<-13784 Statuses=0009 0009 15:43:04 Msec=2250 True Az=82.125 Ze=-26.76 Az status=0009 Ze status=0009 15:43:05 Check angles 15:43:05 SkyScan query 15:43:05 SkyScan query done: ret=0 az=64.53<-4302 ze=-38.58<-14572 Statuses=0009 0008 15:43:05 Msec=3000 True Az=64.53 Ze=-38.58 Az status=0009 Ze status=0008 15:43:05 Check angles 15:43:05 SkyScan query 15:43:06 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.52<-14568 Statuses=0009 0008 15:43:06 Msec=3750 True Az=47.115 Ze=-38.52 Az status=0009 Ze status=0008 15:43:06 Check angles 15:43:06 SkyScan query 15:43:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:43:07 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:43:07 Message to Master queued w/err=0: serial=279255 error=0 15:43:12 Received message from Master: op=Filter serial=279256 15:43:12 Color wheel filter change from 0 to 0 15:43:12 FLIGetFilterPos err=0 currentPosition=0 15:43:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:43:12 Filter is already there-color wheel unchanged 15:43:12 Received message from Master: op=Shutter serial=279257 15:43:12 Shutter LASER close 15:43:12 Received message from Camera: op=State serial=279259 15:43:12 GetSingleValue result=40 Value=cccccccc 15:43:12 SkyScan query 15:43:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:43:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:12 Parameters OK 15:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:12 Set A/D data flow result=40 15:43:12 Set A/D channel type result=40 15:43:12 Set A/D encoding result=40 15:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:12 Set channel filter=0.000000e+000 result=40 15:43:12 Config A/D Result=40 15:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:12 Get A/D filter: -9.255963e+061 result=40 15:43:12 Get A/D value=-858993460 result=40 15:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:12 Parameters OK 15:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:12 Set A/D data flow result=40 15:43:12 Set A/D channel type result=40 15:43:12 Set A/D encoding result=40 15:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:12 Set channel filter=0.000000e+000 result=40 15:43:12 Config A/D Result=40 15:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:12 Get A/D filter: -9.255963e+061 result=40 15:43:12 Get A/D value=-858993460 result=40 15:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:43:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:43:12 Aux= 15:43:12 Message to Camera, serial 279259 queued 15:43:49 Received message from Master: op=PointingHead serial=279272 15:43:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:43:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:43:50 Point started: ret=0 15:43:50 point_skyscan result=0 15:43:50 Check angles 15:43:50 SkyScan query 15:43:51 SkyScan query done: ret=0 az=63.78<-4252 ze=-67.995<-16533 Statuses=0009 0009 15:43:51 Msec=0 True Az=63.78 Ze=-67.995 Az status=0009 Ze status=0009 15:43:51 Check angles 15:43:51 SkyScan query 15:43:52 SkyScan query done: ret=0 az=81.09<-5406 ze=-88.965<-17931 Statuses=0009 0009 15:43:52 Msec=750 True Az=81.09 Ze=-88.965 Az status=0009 Ze status=0009 15:43:52 Check angles 15:43:52 SkyScan query 15:43:52 SkyScan query done: ret=0 az=98.595<-6573 ze=-109.875<-19325 Statuses=0009 0009 15:43:52 Msec=1500 True Az=98.595 Ze=-109.875 Az status=0009 Ze status=0009 15:43:53 Check angles 15:43:53 SkyScan query 15:43:53 SkyScan query done: ret=0 az=116.025<-7735 ze=-130.875<-20725 Statuses=0009 0009 15:43:53 Msec=2250 True Az=116.025 Ze=-130.875 Az status=0009 Ze status=0009 15:43:53 Check angles 15:43:53 SkyScan query 15:43:54 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.555<-21437 Statuses=0009 0008 15:43:54 Msec=3000 True Az=130.965 Ze=-141.555 Az status=0009 Ze status=0008 15:43:54 Check angles 15:43:54 SkyScan query 15:43:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:43:55 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:43:55 Message to Master queued w/err=0: serial=279272 error=0 15:44:00 Received message from Master: op=Filter serial=279273 15:44:00 Color wheel filter change from 0 to 0 15:44:00 FLIGetFilterPos err=0 currentPosition=0 15:44:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:44:00 Filter is already there-color wheel unchanged 15:44:00 Received message from Master: op=Shutter serial=279274 15:44:00 Shutter LASER close 15:44:00 Received message from Camera: op=State serial=279276 15:44:00 GetSingleValue result=40 Value=cccccccc 15:44:00 SkyScan query 15:44:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:44:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:00 Parameters OK 15:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:00 Set A/D data flow result=40 15:44:00 Set A/D channel type result=40 15:44:00 Set A/D encoding result=40 15:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:00 Set channel filter=0.000000e+000 result=40 15:44:00 Config A/D Result=40 15:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:00 Get A/D filter: -9.255963e+061 result=40 15:44:00 Get A/D value=-858993460 result=40 15:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:00 Parameters OK 15:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:00 Set A/D data flow result=40 15:44:00 Set A/D channel type result=40 15:44:00 Set A/D encoding result=40 15:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:00 Set channel filter=0.000000e+000 result=40 15:44:00 Config A/D Result=40 15:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:00 Get A/D filter: -9.255963e+061 result=40 15:44:00 Get A/D value=-858993460 result=40 15:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:44:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:44:00 Aux= 15:44:00 Message to Camera, serial 279276 queued 15:44:37 Received message from Master: op=PointingHead serial=279289 15:44:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:44:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:44:38 Point started: ret=0 15:44:38 point_skyscan result=0 15:44:38 Check angles 15:44:38 SkyScan query 15:44:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 15:44:39 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 15:44:39 Check angles 15:44:39 SkyScan query 15:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:44:40 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:44:40 Message to Master queued w/err=0: serial=279289 error=0 15:44:45 Received message from Master: op=Filter serial=279290 15:44:45 Color wheel filter change from 0 to 0 15:44:45 FLIGetFilterPos err=0 currentPosition=0 15:44:45 FLIGetStepsRemaining err=0 RemainingSteps=0 15:44:45 Filter is already there-color wheel unchanged 15:44:45 Received message from Master: op=Shutter serial=279291 15:44:45 Shutter LASER open 15:44:45 Received message from Camera: op=State serial=279293 15:44:45 GetSingleValue result=40 Value=cccccccc 15:44:45 SkyScan query 15:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:44:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:46 Parameters OK 15:44:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:46 Set A/D data flow result=40 15:44:46 Set A/D channel type result=40 15:44:46 Set A/D encoding result=40 15:44:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:46 Set channel filter=0.000000e+000 result=40 15:44:46 Config A/D Result=40 15:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:46 Get A/D filter: -9.255963e+061 result=40 15:44:46 Get A/D value=-858993460 result=40 15:44:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:46 Parameters OK 15:44:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:46 Set A/D data flow result=40 15:44:46 Set A/D channel type result=40 15:44:46 Set A/D encoding result=40 15:44:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:46 Set channel filter=0.000000e+000 result=40 15:44:46 Config A/D Result=40 15:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:46 Get A/D filter: -9.255963e+061 result=40 15:44:46 Get A/D value=-858993460 result=40 15:44:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:44:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:44:46 Aux= 15:44:46 Message to Camera, serial 279293 queued 15:44:54 Received message from Master: op=Shutter serial=279303 15:44:54 Shutter LASER close 15:44:55 Received message from Master: op=PointingHead serial=279307 15:44:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:44:55 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:44:55 Point started: ret=0 15:44:55 point_skyscan result=0 15:44:56 Check angles 15:44:56 SkyScan query 15:44:56 SkyScan query done: ret=0 az=136.125<-9075 ze=-143.025<-21535 Statuses=0009 0009 15:44:56 Msec=0 True Az=136.125 Ze=-143.025 Az status=0009 Ze status=0009 15:44:57 Check angles 15:44:57 SkyScan query 15:44:57 SkyScan query done: ret=0 az=153.99<-10266 ze=-121.65<-20110 Statuses=0009 0009 15:44:57 Msec=750 True Az=153.99 Ze=-121.65 Az status=0009 Ze status=0009 15:44:57 Check angles 15:44:57 SkyScan query 15:44:58 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.59<-18706 Statuses=0009 0009 15:44:58 Msec=1500 True Az=171.465 Ze=-100.59 Az status=0009 Ze status=0009 15:44:58 Check angles 15:44:58 SkyScan query 15:44:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.71<-17314 Statuses=0008 0009 15:44:59 Msec=2250 True Az=176.01 Ze=-79.71 Az status=0008 Ze status=0009 15:44:59 Check angles 15:44:59 SkyScan query 15:44:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.725<-15915 Statuses=0008 0009 15:44:59 Msec=3000 True Az=176.01 Ze=-58.725 Az status=0008 Ze status=0009 15:45:00 Check angles 15:45:00 SkyScan query 15:45:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:45:00 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:45:00 Message to Master queued w/err=0: serial=279307 error=0 15:45:05 Received message from Master: op=Filter serial=279308 15:45:05 Color wheel filter change from 0 to 0 15:45:05 FLIGetFilterPos err=0 currentPosition=0 15:45:05 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:05 Filter is already there-color wheel unchanged 15:45:05 Received message from Master: op=Shutter serial=279309 15:45:05 Shutter LASER close 15:45:05 Received message from Camera: op=State serial=279311 15:45:05 GetSingleValue result=40 Value=cccccccc 15:45:05 SkyScan query 15:45:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:45:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:06 Parameters OK 15:45:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:06 Set A/D data flow result=40 15:45:06 Set A/D channel type result=40 15:45:06 Set A/D encoding result=40 15:45:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:06 Set channel filter=0.000000e+000 result=40 15:45:06 Config A/D Result=40 15:45:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:06 Get A/D filter: -9.255963e+061 result=40 15:45:06 Get A/D value=-858993460 result=40 15:45:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:06 Parameters OK 15:45:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:06 Set A/D data flow result=40 15:45:06 Set A/D channel type result=40 15:45:06 Set A/D encoding result=40 15:45:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:06 Set channel filter=0.000000e+000 result=40 15:45:06 Config A/D Result=40 15:45:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:06 Get A/D filter: -9.255963e+061 result=40 15:45:06 Get A/D value=-858993460 result=40 15:45:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:06 Aux= 15:45:06 Message to Camera, serial 279311 queued 15:45:27 Received message from Master: op=Identify serial=279312 15:45:43 Received message from Master: op=PointingHead serial=279327 15:45:43 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:45:43 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:45:43 Point started: ret=0 15:45:43 point_skyscan result=0 15:45:44 Check angles 15:45:44 SkyScan query 15:45:45 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.675<-13445 Statuses=0009 0009 15:45:45 Msec=0 True Az=152.955 Ze=-21.675 Az status=0009 Ze status=0009 15:45:45 Check angles 15:45:45 SkyScan query 15:45:45 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.705<-12047 Statuses=0009 0009 15:45:45 Msec=750 True Az=135.39 Ze=-0.705 Az status=0009 Ze status=0009 15:45:45 Check angles [UTC 2018-12-19 15:45:45] 15:45:45 SkyScan query 15:45:46 SkyScan query done: ret=0 az=116.175<-7745 ze=22.365<-10509 Statuses=0009 0009 15:45:46 Msec=1500 True Az=116.175 Ze=22.365 Az status=0009 Ze status=0009 15:45:46 Check angles 15:45:46 SkyScan query 15:45:47 SkyScan query done: ret=0 az=99.81<-6654 ze=42.015<-9199 Statuses=0009 0009 15:45:47 Msec=2250 True Az=99.81 Ze=42.015 Az status=0009 Ze status=0009 15:45:47 Check angles 15:45:47 SkyScan query 15:45:48 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:45:48 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:45:48 Check angles 15:45:48 SkyScan query 15:45:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:45:48 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:45:48 Message to Master queued w/err=0: serial=279327 error=0 15:45:53 Received message from Master: op=Filter serial=279328 15:45:53 Color wheel filter change from 0 to 0 15:45:53 FLIGetFilterPos err=0 currentPosition=0 15:45:53 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:53 Filter is already there-color wheel unchanged 15:45:53 Received message from Master: op=Shutter serial=279329 15:45:53 Shutter LASER close 15:45:54 Received message from Camera: op=State serial=279331 15:45:54 GetSingleValue result=40 Value=cccccccc 15:45:54 SkyScan query 15:45:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:45:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:54 Parameters OK 15:45:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:54 Set A/D data flow result=40 15:45:54 Set A/D channel type result=40 15:45:54 Set A/D encoding result=40 15:45:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:54 Set channel filter=0.000000e+000 result=40 15:45:54 Config A/D Result=40 15:45:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:54 Get A/D filter: -9.255963e+061 result=40 15:45:54 Get A/D value=-858993460 result=40 15:45:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:54 Parameters OK 15:45:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:54 Set A/D data flow result=40 15:45:54 Set A/D channel type result=40 15:45:54 Set A/D encoding result=40 15:45:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:54 Set channel filter=0.000000e+000 result=40 15:45:54 Config A/D Result=40 15:45:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:54 Get A/D filter: -9.255963e+061 result=40 15:45:54 Get A/D value=-858993460 result=40 15:45:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:54 Aux= 15:45:54 Message to Camera, serial 279331 queued 15:46:30 Received message from Master: op=PointingHead serial=279343 15:46:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:46:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:46:30 Point started: ret=0 15:46:30 point_skyscan result=0 15:46:31 Check angles 15:46:31 SkyScan query 15:46:32 SkyScan query done: ret=0 az=109.44<-7296 ze=38.475<-9435 Statuses=0009 0008 15:46:32 Msec=0 True Az=109.44 Ze=38.475 Az status=0009 Ze status=0008 15:46:32 Check angles 15:46:32 SkyScan query 15:46:32 SkyScan query done: ret=0 az=126.87<-8458 ze=38.505<-9433 Statuses=0009 0008 15:46:32 Msec=750 True Az=126.87 Ze=38.505 Az status=0009 Ze status=0008 15:46:33 Check angles 15:46:33 SkyScan query 15:46:33 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 15:46:33 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 15:46:33 Check angles 15:46:33 SkyScan query 15:46:34 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 15:46:34 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 15:46:34 Check angles 15:46:34 SkyScan query 15:46:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:46:35 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:46:35 Check angles 15:46:35 SkyScan query 15:46:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:46:35 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:46:35 Message to Master queued w/err=0: serial=279343 error=0 15:46:40 Received message from Master: op=Filter serial=279344 15:46:40 Color wheel filter change from 0 to 0 15:46:40 FLIGetFilterPos err=0 currentPosition=0 15:46:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:46:40 Filter is already there-color wheel unchanged 15:46:41 Received message from Master: op=Shutter serial=279345 15:46:41 Shutter LASER close 15:46:41 Received message from Camera: op=State serial=279347 15:46:41 GetSingleValue result=40 Value=cccccccc 15:46:41 SkyScan query 15:46:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:46:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:41 Parameters OK 15:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:41 Set A/D data flow result=40 15:46:41 Set A/D channel type result=40 15:46:41 Set A/D encoding result=40 15:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:41 Set channel filter=0.000000e+000 result=40 15:46:41 Config A/D Result=40 15:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:41 Get A/D filter: -9.255963e+061 result=40 15:46:41 Get A/D value=-858993460 result=40 15:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:41 Parameters OK 15:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:41 Set A/D data flow result=40 15:46:41 Set A/D channel type result=40 15:46:41 Set A/D encoding result=40 15:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:41 Set channel filter=0.000000e+000 result=40 15:46:41 Config A/D Result=40 15:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:41 Get A/D filter: -9.255963e+061 result=40 15:46:41 Get A/D value=-858993460 result=40 15:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:46:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:46:41 Aux= 15:46:41 Message to Camera, serial 279347 queued 15:47:18 Received message from Master: op=PointingHead serial=279360 15:47:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:47:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:47:18 Point started: ret=0 15:47:18 point_skyscan result=0 15:47:19 Check angles 15:47:19 SkyScan query 15:47:20 SkyScan query done: ret=0 az=152.88<-10192 ze=8.52<-11432 Statuses=0009 0009 15:47:20 Msec=0 True Az=152.88 Ze=8.52 Az status=0009 Ze status=0009 15:47:20 Check angles 15:47:20 SkyScan query 15:47:21 SkyScan query done: ret=0 az=135<-9000 ze=-12.84<-12856 Statuses=0009 0009 15:47:21 Msec=750 True Az=135 Ze=-12.84 Az status=0009 Ze status=0009 15:47:21 Check angles 15:47:21 SkyScan query 15:47:21 SkyScan query done: ret=0 az=117.495<-7833 ze=-33.885<-14259 Statuses=0009 0009 15:47:21 Msec=1500 True Az=117.495 Ze=-33.885 Az status=0009 Ze status=0009 15:47:21 Check angles 15:47:21 SkyScan query 15:47:22 SkyScan query done: ret=0 az=100.125<-6675 ze=-51.57<-15438 Statuses=0009 0009 15:47:22 Msec=2250 True Az=100.125 Ze=-51.57 Az status=0009 Ze status=0009 15:47:22 Check angles 15:47:22 SkyScan query 15:47:23 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:47:23 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:47:23 Check angles 15:47:23 SkyScan query 15:47:24 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 15:47:24 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 15:47:24 Message to Master queued w/err=0: serial=279360 error=0 15:47:29 Received message from Master: op=Filter serial=279361 15:47:29 Color wheel filter change from 0 to 0 15:47:29 FLIGetFilterPos err=0 currentPosition=0 15:47:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:47:29 Filter is already there-color wheel unchanged 15:47:29 Received message from Master: op=Shutter serial=279362 15:47:29 Shutter LASER close 15:47:29 Received message from Camera: op=State serial=279364 15:47:29 GetSingleValue result=40 Value=cccccccc 15:47:29 SkyScan query 15:47:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:47:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:29 Parameters OK 15:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:29 Set A/D data flow result=40 15:47:29 Set A/D channel type result=40 15:47:29 Set A/D encoding result=40 15:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:29 Set channel filter=0.000000e+000 result=40 15:47:29 Config A/D Result=40 15:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:29 Get A/D filter: -9.255963e+061 result=40 15:47:29 Get A/D value=-858993460 result=40 15:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:29 Parameters OK 15:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:29 Set A/D data flow result=40 15:47:29 Set A/D channel type result=40 15:47:29 Set A/D encoding result=40 15:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:29 Set channel filter=0.000000e+000 result=40 15:47:29 Config A/D Result=40 15:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:29 Get A/D filter: -9.255963e+061 result=40 15:47:29 Get A/D value=-858993460 result=40 15:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:47:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:47:29 Aux= 15:47:29 Message to Camera, serial 279364 queued 15:48:06 Received message from Master: op=PointingHead serial=279377 15:48:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:48:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:48:07 Point started: ret=0 15:48:07 point_skyscan result=0 15:48:07 Check angles 15:48:07 SkyScan query 15:48:08 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.675<-17445 Statuses=0009 0009 15:48:08 Msec=0 True Az=109.395 Ze=-81.675 Az status=0009 Ze status=0009 15:48:08 Check angles 15:48:08 SkyScan query 15:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.02<-18868 Statuses=0008 0009 15:48:09 Msec=750 True Az=112.995 Ze=-103.02 Az status=0008 Ze status=0009 15:48:09 Check angles 15:48:09 SkyScan query 15:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.005<-20267 Statuses=0008 0009 15:48:09 Msec=1500 True Az=112.995 Ze=-124.005 Az status=0008 Ze status=0009 15:48:10 Check angles 15:48:10 SkyScan query 15:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.41<-21694 Statuses=0008 0009 15:48:10 Msec=2250 True Az=112.995 Ze=-145.41 Az status=0008 Ze status=0009 15:48:10 Check angles 15:48:10 SkyScan query 15:48:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.815<-23121 Statuses=0008 0009 15:48:11 Msec=3000 True Az=112.995 Ze=-166.815 Az status=0008 Ze status=0009 15:48:11 Check angles 15:48:11 SkyScan query 15:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:48:12 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:48:12 Message to Master queued w/err=0: serial=279377 error=0 15:48:17 Received message from Master: op=Filter serial=279378 15:48:17 Color wheel filter change from 0 to 0 15:48:17 FLIGetFilterPos err=0 currentPosition=0 15:48:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:48:17 Filter is already there-color wheel unchanged 15:48:17 Received message from Master: op=Shutter serial=279379 15:48:17 Shutter LASER open 15:48:17 Received message from Camera: op=State serial=279381 15:48:17 GetSingleValue result=40 Value=cccccccc 15:48:17 SkyScan query 15:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:18 Parameters OK 15:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:18 Set A/D data flow result=40 15:48:18 Set A/D channel type result=40 15:48:18 Set A/D encoding result=40 15:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:18 Set channel filter=0.000000e+000 result=40 15:48:18 Config A/D Result=40 15:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:18 Get A/D filter: -9.255963e+061 result=40 15:48:18 Get A/D value=-858993460 result=40 15:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:18 Parameters OK 15:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:18 Set A/D data flow result=40 15:48:18 Set A/D channel type result=40 15:48:18 Set A/D encoding result=40 15:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:18 Set channel filter=0.000000e+000 result=40 15:48:18 Config A/D Result=40 15:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:18 Get A/D filter: -9.255963e+061 result=40 15:48:18 Get A/D value=-858993460 result=40 15:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:48:18 Aux= 15:48:18 Message to Camera, serial 279381 queued 15:48:26 Received message from Master: op=Shutter serial=279391 15:48:26 Shutter LASER close 15:48:27 Received message from Master: op=PointingHead serial=279395 15:48:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:48:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:48:27 Point started: ret=0 15:48:27 point_skyscan result=0 15:48:28 Check angles 15:48:28 SkyScan query 15:48:28 SkyScan query done: ret=0 az=89.85<-5990 ze=157.2<-1520 Statuses=0009 0009 15:48:28 Msec=0 True Az=89.85 Ze=157.2 Az status=0009 Ze status=0009 15:48:28 Check angles 15:48:28 SkyScan query 15:48:29 SkyScan query done: ret=0 az=72.465<-4831 ze=136.305<-2913 Statuses=0009 0009 15:48:29 Msec=750 True Az=72.465 Ze=136.305 Az status=0009 Ze status=0009 15:48:29 Check angles 15:48:29 SkyScan query 15:48:30 SkyScan query done: ret=0 az=55.035<-3669 ze=115.395<-4307 Statuses=0009 0009 15:48:30 Msec=1500 True Az=55.035 Ze=115.395 Az status=0009 Ze status=0009 15:48:30 Check angles 15:48:30 SkyScan query 15:48:30 SkyScan query done: ret=0 az=40.995<-2733 ze=94.395<-5707 Statuses=0009 0009 15:48:30 Msec=2250 True Az=40.995 Ze=94.395 Az status=0009 Ze status=0009 15:48:31 Check angles 15:48:31 SkyScan query 15:48:31 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 15:48:31 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 15:48:31 Check angles 15:48:31 SkyScan query 15:48:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 15:48:32 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 15:48:32 Check angles 15:48:32 SkyScan query 15:48:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:48:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:48:33 Message to Master queued w/err=0: serial=279395 error=0 15:48:38 Received message from Master: op=Filter serial=279396 15:48:38 Color wheel filter change from 0 to 0 15:48:38 FLIGetFilterPos err=0 currentPosition=0 15:48:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:48:38 Filter is already there-color wheel unchanged 15:48:38 Received message from Master: op=Shutter serial=279397 15:48:38 Shutter LASER close 15:48:38 Received message from Camera: op=State serial=279399 15:48:38 GetSingleValue result=40 Value=cccccccc 15:48:38 SkyScan query 15:48:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:48:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:39 Parameters OK 15:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:39 Set A/D data flow result=40 15:48:39 Set A/D channel type result=40 15:48:39 Set A/D encoding result=40 15:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:39 Set channel filter=0.000000e+000 result=40 15:48:39 Config A/D Result=40 15:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:39 Get A/D filter: -9.255963e+061 result=40 15:48:39 Get A/D value=-858993460 result=40 15:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:39 Parameters OK 15:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:39 Set A/D data flow result=40 15:48:39 Set A/D channel type result=40 15:48:39 Set A/D encoding result=40 15:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:39 Set channel filter=0.000000e+000 result=40 15:48:39 Config A/D Result=40 15:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:39 Get A/D filter: -9.255963e+061 result=40 15:48:39 Get A/D value=-858993460 result=40 15:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:48:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:48:39 Aux= 15:48:39 Message to Camera, serial 279399 queued 15:49:15 Received message from Master: op=PointingHead serial=279412 15:49:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:49:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:49:16 Point started: ret=0 15:49:16 point_skyscan result=0 15:49:17 Check angles 15:49:17 SkyScan query 15:49:17 SkyScan query done: ret=0 az=63.99<-4266 ze=66.54<-7564 Statuses=0009 0008 15:49:17 Msec=0 True Az=63.99 Ze=66.54 Az status=0009 Ze status=0008 15:49:17 Check angles 15:49:17 SkyScan query 15:49:18 SkyScan query done: ret=0 az=81.405<-5427 ze=66.51<-7566 Statuses=0009 0008 15:49:18 Msec=750 True Az=81.405 Ze=66.51 Az status=0009 Ze status=0008 15:49:18 Check angles 15:49:18 SkyScan query 15:49:19 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 15:49:19 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 15:49:19 Check angles 15:49:19 SkyScan query 15:49:19 SkyScan query done: ret=0 az=116.28<-7752 ze=66.495<-7567 Statuses=0009 0008 15:49:19 Msec=2250 True Az=116.28 Ze=66.495 Az status=0009 Ze status=0008 15:49:20 Check angles 15:49:20 SkyScan query 15:49:20 SkyScan query done: ret=0 az=133.74<-8916 ze=66.495<-7567 Statuses=0009 0008 15:49:20 Msec=3000 True Az=133.74 Ze=66.495 Az status=0009 Ze status=0008 15:49:20 Check angles 15:49:20 SkyScan query 15:49:21 SkyScan query done: ret=0 az=151.215<-10081 ze=66.495<-7567 Statuses=0009 0008 15:49:21 Msec=3750 True Az=151.215 Ze=66.495 Az status=0009 Ze status=0008 15:49:21 Check angles 15:49:21 SkyScan query 15:49:22 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:49:22 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:49:22 Message to Master queued w/err=0: serial=279412 error=0 15:49:27 Received message from Master: op=Filter serial=279413 15:49:27 Color wheel filter change from 0 to 0 15:49:27 FLIGetFilterPos err=0 currentPosition=0 15:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 15:49:27 Filter is already there-color wheel unchanged 15:49:27 Received message from Master: op=Shutter serial=279414 15:49:27 Shutter LASER close 15:49:27 Received message from Camera: op=State serial=279416 15:49:27 GetSingleValue result=40 Value=cccccccc 15:49:27 SkyScan query 15:49:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:49:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:27 Parameters OK 15:49:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:27 Set A/D data flow result=40 15:49:27 Set A/D channel type result=40 15:49:27 Set A/D encoding result=40 15:49:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:27 Set channel filter=0.000000e+000 result=40 15:49:27 Config A/D Result=40 15:49:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:27 Get A/D filter: -9.255963e+061 result=40 15:49:27 Get A/D value=-858993460 result=40 15:49:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:27 Parameters OK 15:49:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:27 Set A/D data flow result=40 15:49:27 Set A/D channel type result=40 15:49:27 Set A/D encoding result=40 15:49:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:27 Set channel filter=0.000000e+000 result=40 15:49:27 Config A/D Result=40 15:49:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:27 Get A/D filter: -9.255963e+061 result=40 15:49:27 Get A/D value=-858993460 result=40 15:49:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:49:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:49:27 Aux= 15:49:27 Message to Camera, serial 279416 queued 15:50:04 Received message from Master: op=PointingHead serial=279429 15:50:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:50:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:50:05 Point started: ret=0 15:50:05 point_skyscan result=0 15:50:05 Check angles 15:50:05 SkyScan query 15:50:06 SkyScan query done: ret=0 az=134.58<-8972 ze=36.405<-9573 Statuses=0009 0009 15:50:06 Msec=0 True Az=134.58 Ze=36.405 Az status=0009 Ze status=0009 15:50:06 Check angles 15:50:06 SkyScan query 15:50:07 SkyScan query done: ret=0 az=117.15<-7810 ze=15.45<-10970 Statuses=0009 0009 15:50:07 Msec=750 True Az=117.15 Ze=15.45 Az status=0009 Ze status=0009 15:50:07 Check angles 15:50:07 SkyScan query 15:50:07 SkyScan query done: ret=0 az=99.27<-6618 ze=-6.045<-12403 Statuses=0009 0009 15:50:07 Msec=1500 True Az=99.27 Ze=-6.045 Az status=0009 Ze status=0009 15:50:08 Check angles 15:50:08 SkyScan query 15:50:08 SkyScan query done: ret=0 az=81.93<-5462 ze=-27.015<-13801 Statuses=0009 0009 15:50:08 Msec=2250 True Az=81.93 Ze=-27.015 Az status=0009 Ze status=0009 15:50:08 Check angles 15:50:08 SkyScan query 15:50:09 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.58<-14572 Statuses=0009 0008 15:50:09 Msec=3000 True Az=64.44 Ze=-38.58 Az status=0009 Ze status=0008 15:50:09 Check angles 15:50:09 SkyScan query 15:50:10 SkyScan query done: ret=0 az=46.935<-3129 ze=-38.52<-14568 Statuses=0009 0008 15:50:10 Msec=3750 True Az=46.935 Ze=-38.52 Az status=0009 Ze status=0008 15:50:10 Check angles 15:50:10 SkyScan query 15:50:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:50:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:50:10 Message to Master queued w/err=0: serial=279429 error=0 15:50:15 Received message from Master: op=Filter serial=279430 15:50:15 Color wheel filter change from 0 to 0 15:50:15 FLIGetFilterPos err=0 currentPosition=0 15:50:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:50:15 Filter is already there-color wheel unchanged 15:50:16 Received message from Master: op=Shutter serial=279431 15:50:16 Shutter LASER close 15:50:16 Received message from Camera: op=State serial=279433 15:50:16 GetSingleValue result=40 Value=cccccccc 15:50:16 SkyScan query 15:50:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:50:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:16 Parameters OK 15:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:16 Set A/D data flow result=40 15:50:16 Set A/D channel type result=40 15:50:16 Set A/D encoding result=40 15:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:16 Set channel filter=0.000000e+000 result=40 15:50:16 Config A/D Result=40 15:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:16 Get A/D filter: -9.255963e+061 result=40 15:50:16 Get A/D value=-858993460 result=40 15:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:16 Parameters OK 15:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:16 Set A/D data flow result=40 15:50:16 Set A/D channel type result=40 15:50:16 Set A/D encoding result=40 15:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:16 Set channel filter=0.000000e+000 result=40 15:50:16 Config A/D Result=40 15:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:16 Get A/D filter: -9.255963e+061 result=40 15:50:16 Get A/D value=-858993460 result=40 15:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:50:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:50:16 Aux= 15:50:16 Message to Camera, serial 279433 queued 15:50:53 Received message from Master: op=PointingHead serial=279446 15:50:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:50:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:50:53 Point started: ret=0 15:50:53 point_skyscan result=0 15:50:54 Check angles 15:50:54 SkyScan query 15:50:55 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.445<-16563 Statuses=0009 0009 15:50:55 Msec=0 True Az=64.2 Ze=-68.445 Az status=0009 Ze status=0009 15:50:55 Check angles 15:50:55 SkyScan query 15:50:56 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.415<-17961 Statuses=0009 0009 15:50:56 Msec=750 True Az=81.54 Ze=-89.415 Az status=0009 Ze status=0009 15:50:56 Check angles 15:50:56 SkyScan query 15:50:56 SkyScan query done: ret=0 az=99.075<-6605 ze=-110.355<-19357 Statuses=0009 0009 15:50:56 Msec=1500 True Az=99.075 Ze=-110.355 Az status=0009 Ze status=0009 15:50:56 Check angles 15:50:56 SkyScan query 15:50:57 SkyScan query done: ret=0 az=116.505<-7767 ze=-131.28<-20752 Statuses=0009 0009 15:50:57 Msec=2250 True Az=116.505 Ze=-131.28 Az status=0009 Ze status=0009 15:50:57 Check angles 15:50:57 SkyScan query 15:50:58 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.555<-21437 Statuses=0009 0008 15:50:58 Msec=3000 True Az=130.98 Ze=-141.555 Az status=0009 Ze status=0008 15:50:58 Check angles 15:50:58 SkyScan query 15:50:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:50:59 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:50:59 Message to Master queued w/err=0: serial=279446 error=0 15:51:04 Received message from Master: op=Filter serial=279447 15:51:04 Color wheel filter change from 0 to 0 15:51:04 FLIGetFilterPos err=0 currentPosition=0 15:51:04 FLIGetStepsRemaining err=0 RemainingSteps=0 15:51:04 Filter is already there-color wheel unchanged 15:51:04 Received message from Master: op=Shutter serial=279448 15:51:04 Shutter LASER close 15:51:04 Received message from Camera: op=State serial=279450 15:51:04 GetSingleValue result=40 Value=cccccccc 15:51:04 SkyScan query 15:51:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:51:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:04 Parameters OK 15:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:04 Set A/D data flow result=40 15:51:04 Set A/D channel type result=40 15:51:04 Set A/D encoding result=40 15:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:04 Set channel filter=0.000000e+000 result=40 15:51:04 Config A/D Result=40 15:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:04 Get A/D filter: -9.255963e+061 result=40 15:51:04 Get A/D value=-858993460 result=40 15:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:04 Parameters OK 15:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:04 Set A/D data flow result=40 15:51:04 Set A/D channel type result=40 15:51:04 Set A/D encoding result=40 15:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:04 Set channel filter=0.000000e+000 result=40 15:51:04 Config A/D Result=40 15:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:04 Get A/D filter: -9.255963e+061 result=40 15:51:04 Get A/D value=-858993460 result=40 15:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:51:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:51:04 Aux= 15:51:04 Message to Camera, serial 279450 queued 15:51:40 Received message from Master: op=PointingHead serial=279462 15:51:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:51:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:51:41 Point started: ret=0 15:51:41 point_skyscan result=0 15:51:41 Check angles 15:51:41 SkyScan query 15:51:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 15:51:42 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 15:51:42 Check angles 15:51:42 SkyScan query 15:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:51:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:51:43 Message to Master queued w/err=0: serial=279462 error=0 15:51:48 Received message from Master: op=Filter serial=279463 15:51:48 Color wheel filter change from 0 to 0 15:51:48 FLIGetFilterPos err=0 currentPosition=0 15:51:48 FLIGetStepsRemaining err=0 RemainingSteps=0 15:51:48 Filter is already there-color wheel unchanged 15:51:48 Received message from Master: op=Shutter serial=279464 15:51:48 Shutter LASER open 15:51:48 Received message from Camera: op=State serial=279466 15:51:48 GetSingleValue result=40 Value=cccccccc 15:51:48 SkyScan query 15:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:51:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:49 Parameters OK 15:51:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:49 Set A/D data flow result=40 15:51:49 Set A/D channel type result=40 15:51:49 Set A/D encoding result=40 15:51:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:49 Set channel filter=0.000000e+000 result=40 15:51:49 Config A/D Result=40 15:51:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:49 Get A/D filter: -9.255963e+061 result=40 15:51:49 Get A/D value=-858993460 result=40 15:51:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:49 Parameters OK 15:51:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:49 Set A/D data flow result=40 15:51:49 Set A/D channel type result=40 15:51:49 Set A/D encoding result=40 15:51:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:49 Set channel filter=0.000000e+000 result=40 15:51:49 Config A/D Result=40 15:51:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:49 Get A/D filter: -9.255963e+061 result=40 15:51:49 Get A/D value=-858993460 result=40 15:51:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:51:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:51:49 Aux= 15:51:49 Message to Camera, serial 279466 queued 15:51:57 Received message from Master: op=Shutter serial=279476 15:51:57 Shutter LASER close 15:51:58 Received message from Master: op=PointingHead serial=279480 15:51:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:51:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:51:58 Point started: ret=0 15:51:58 point_skyscan result=0 15:51:59 Check angles 15:51:59 SkyScan query 15:51:59 SkyScan query done: ret=0 az=136.53<-9102 ze=-142.695<-21513 Statuses=0009 0009 15:51:59 Msec=0 True Az=136.53 Ze=-142.695 Az status=0009 Ze status=0009 15:51:59 Check angles 15:51:59 SkyScan query 15:52:00 SkyScan query done: ret=0 az=153.93<-10262 ze=-121.8<-20120 Statuses=0009 0009 15:52:00 Msec=750 True Az=153.93 Ze=-121.8 Az status=0009 Ze status=0009 15:52:00 Check angles 15:52:00 SkyScan query 15:52:01 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.725<-18715 Statuses=0009 0009 15:52:01 Msec=1500 True Az=171.465 Ze=-100.725 Az status=0009 Ze status=0009 15:52:01 Check angles 15:52:01 SkyScan query 15:52:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.335<-17289 Statuses=0008 0009 15:52:02 Msec=2250 True Az=176.01 Ze=-79.335 Az status=0008 Ze status=0009 15:52:02 Check angles 15:52:02 SkyScan query 15:52:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.365<-15891 Statuses=0008 0009 15:52:02 Msec=3000 True Az=176.01 Ze=-58.365 Az status=0008 Ze status=0009 15:52:02 Check angles 15:52:02 SkyScan query 15:52:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:52:03 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:52:03 Message to Master queued w/err=0: serial=279480 error=0 15:52:08 Received message from Master: op=Filter serial=279481 15:52:08 Color wheel filter change from 0 to 0 15:52:08 FLIGetFilterPos err=0 currentPosition=0 15:52:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:52:08 Filter is already there-color wheel unchanged 15:52:08 Received message from Master: op=Shutter serial=279482 15:52:08 Shutter LASER close 15:52:08 Received message from Camera: op=State serial=279484 15:52:08 GetSingleValue result=40 Value=cccccccc 15:52:08 SkyScan query 15:52:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:52:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:09 Parameters OK 15:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:09 Set A/D data flow result=40 15:52:09 Set A/D channel type result=40 15:52:09 Set A/D encoding result=40 15:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:09 Set channel filter=0.000000e+000 result=40 15:52:09 Config A/D Result=40 15:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:09 Get A/D filter: -9.255963e+061 result=40 15:52:09 Get A/D value=-858993460 result=40 15:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:09 Parameters OK 15:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:09 Set A/D data flow result=40 15:52:09 Set A/D channel type result=40 15:52:09 Set A/D encoding result=40 15:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:09 Set channel filter=0.000000e+000 result=40 15:52:09 Config A/D Result=40 15:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:09 Get A/D filter: -9.255963e+061 result=40 15:52:09 Get A/D value=-858993460 result=40 15:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:52:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:52:09 Aux= 15:52:09 Message to Camera, serial 279484 queued 15:52:46 Received message from Master: op=PointingHead serial=279497 15:52:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:52:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:52:46 Point started: ret=0 15:52:46 point_skyscan result=0 15:52:47 Check angles 15:52:47 SkyScan query 15:52:48 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.855<-13457 Statuses=0009 0009 15:52:48 Msec=0 True Az=152.97 Ze=-21.855 Az status=0009 Ze status=0009 15:52:48 Check angles 15:52:48 SkyScan query 15:52:48 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.435<-12029 Statuses=0009 0009 15:52:48 Msec=750 True Az=135.27 Ze=-0.435 Az status=0009 Ze status=0009 15:52:48 Check angles 15:52:48 SkyScan query 15:52:49 SkyScan query done: ret=0 az=117.69<-7846 ze=20.535<-10631 Statuses=0009 0009 15:52:49 Msec=1500 True Az=117.69 Ze=20.535 Az status=0009 Ze status=0009 15:52:49 Check angles 15:52:49 SkyScan query 15:52:50 SkyScan query done: ret=0 az=100.305<-6687 ze=41.505<-9233 Statuses=0009 0009 15:52:50 Msec=2250 True Az=100.305 Ze=41.505 Az status=0009 Ze status=0009 15:52:50 Check angles 15:52:50 SkyScan query 15:52:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 15:52:51 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 15:52:51 Check angles 15:52:51 SkyScan query 15:52:51 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 15:52:51 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 15:52:51 Message to Master queued w/err=0: serial=279497 error=0 15:52:56 Received message from Master: op=Filter serial=279498 15:52:56 Color wheel filter change from 0 to 0 15:52:56 FLIGetFilterPos err=0 currentPosition=0 15:52:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:52:56 Filter is already there-color wheel unchanged 15:52:56 Received message from Master: op=Shutter serial=279499 15:52:56 Shutter LASER close 15:52:57 Received message from Camera: op=State serial=279501 15:52:57 GetSingleValue result=40 Value=cccccccc 15:52:57 SkyScan query 15:52:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:52:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:57 Parameters OK 15:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:57 Set A/D data flow result=40 15:52:57 Set A/D channel type result=40 15:52:57 Set A/D encoding result=40 15:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:57 Set channel filter=0.000000e+000 result=40 15:52:57 Config A/D Result=40 15:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:57 Get A/D filter: -9.255963e+061 result=40 15:52:57 Get A/D value=-858993460 result=40 15:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:57 Parameters OK 15:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:57 Set A/D data flow result=40 15:52:57 Set A/D channel type result=40 15:52:57 Set A/D encoding result=40 15:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:57 Set channel filter=0.000000e+000 result=40 15:52:57 Config A/D Result=40 15:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:57 Get A/D filter: -9.255963e+061 result=40 15:52:57 Get A/D value=-858993460 result=40 15:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:52:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:52:57 Aux= 15:52:57 Message to Camera, serial 279501 queued 15:53:34 Received message from Master: op=PointingHead serial=279514 15:53:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:53:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:53:34 Point started: ret=0 15:53:34 point_skyscan result=0 15:53:35 Check angles 15:53:35 SkyScan query 15:53:36 SkyScan query done: ret=0 az=109.035<-7269 ze=38.49<-9434 Statuses=0009 0008 15:53:36 Msec=0 True Az=109.035 Ze=38.49 Az status=0009 Ze status=0008 15:53:36 Check angles 15:53:36 SkyScan query 15:53:36 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 15:53:36 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 15:53:37 Check angles 15:53:37 SkyScan query 15:53:37 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 15:53:37 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 15:53:37 Check angles 15:53:37 SkyScan query 15:53:38 SkyScan query done: ret=0 az=161.37<-10758 ze=38.505<-9433 Statuses=0009 0008 15:53:38 Msec=2250 True Az=161.37 Ze=38.505 Az status=0009 Ze status=0008 15:53:38 Check angles 15:53:38 SkyScan query 15:53:39 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:53:39 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:53:39 Check angles 15:53:39 SkyScan query 15:53:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:53:39 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:53:39 Message to Master queued w/err=0: serial=279514 error=0 15:53:44 Received message from Master: op=Filter serial=279515 15:53:44 Color wheel filter change from 0 to 0 15:53:44 FLIGetFilterPos err=0 currentPosition=0 15:53:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:53:44 Filter is already there-color wheel unchanged 15:53:45 Received message from Master: op=Shutter serial=279516 15:53:45 Shutter LASER close 15:53:45 Received message from Camera: op=State serial=279518 15:53:45 GetSingleValue result=40 Value=cccccccc 15:53:45 SkyScan query 15:53:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:53:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:45 Parameters OK 15:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:45 Set A/D data flow result=40 15:53:45 Set A/D channel type result=40 15:53:45 Set A/D encoding result=40 15:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:45 Set channel filter=0.000000e+000 result=40 15:53:45 Config A/D Result=40 15:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:45 Get A/D filter: -9.255963e+061 result=40 15:53:45 Get A/D value=-858993460 result=40 15:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:45 Parameters OK 15:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:45 Set A/D data flow result=40 15:53:45 Set A/D channel type result=40 15:53:45 Set A/D encoding result=40 15:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:45 Set channel filter=0.000000e+000 result=40 15:53:45 Config A/D Result=40 15:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:45 Get A/D filter: -9.255963e+061 result=40 15:53:45 Get A/D value=-858993460 result=40 15:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:53:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:53:45 Aux= 15:53:45 Message to Camera, serial 279518 queued 15:54:22 Received message from Master: op=PointingHead serial=279531 15:54:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:54:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:54:22 Point started: ret=0 15:54:22 point_skyscan result=0 15:54:23 Check angles 15:54:23 SkyScan query 15:54:24 SkyScan query done: ret=0 az=152.925<-10195 ze=8.67<-11422 Statuses=0009 0009 15:54:24 Msec=0 True Az=152.925 Ze=8.67 Az status=0009 Ze status=0009 15:54:24 Check angles 15:54:24 SkyScan query 15:54:24 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.3<-12820 Statuses=0009 0009 15:54:24 Msec=750 True Az=135.375 Ze=-12.3 Az status=0009 Ze status=0009 15:54:25 Check angles 15:54:25 SkyScan query 15:54:25 SkyScan query done: ret=0 az=117.975<-7865 ze=-33.24<-14216 Statuses=0009 0009 15:54:25 Msec=1500 True Az=117.975 Ze=-33.24 Az status=0009 Ze status=0009 15:54:25 Check angles 15:54:25 SkyScan query 15:54:26 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.54<-15436 Statuses=0009 0009 15:54:26 Msec=2250 True Az=100.62 Ze=-51.54 Az status=0009 Ze status=0009 15:54:26 Check angles 15:54:26 SkyScan query 15:54:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 15:54:27 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 15:54:27 Check angles 15:54:27 SkyScan query 15:54:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:54:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:54:27 Message to Master queued w/err=0: serial=279531 error=0 15:54:32 Received message from Master: op=Filter serial=279532 15:54:32 Color wheel filter change from 0 to 0 15:54:32 FLIGetFilterPos err=0 currentPosition=0 15:54:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:54:32 Filter is already there-color wheel unchanged 15:54:33 Received message from Master: op=Shutter serial=279533 15:54:33 Shutter LASER close 15:54:33 Received message from Camera: op=State serial=279535 15:54:33 GetSingleValue result=40 Value=cccccccc 15:54:33 SkyScan query 15:54:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:54:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:33 Parameters OK 15:54:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:33 Set A/D data flow result=40 15:54:33 Set A/D channel type result=40 15:54:33 Set A/D encoding result=40 15:54:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:33 Set channel filter=0.000000e+000 result=40 15:54:33 Config A/D Result=40 15:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:33 Get A/D filter: -9.255963e+061 result=40 15:54:33 Get A/D value=-858993460 result=40 15:54:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:33 Parameters OK 15:54:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:33 Set A/D data flow result=40 15:54:33 Set A/D channel type result=40 15:54:33 Set A/D encoding result=40 15:54:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:33 Set channel filter=0.000000e+000 result=40 15:54:33 Config A/D Result=40 15:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:33 Get A/D filter: -9.255963e+061 result=40 15:54:33 Get A/D value=-858993460 result=40 15:54:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:54:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:54:33 Aux= 15:54:33 Message to Camera, serial 279535 queued 15:55:10 Received message from Master: op=PointingHead serial=279548 15:55:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:55:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:55:10 Point started: ret=0 15:55:10 point_skyscan result=0 15:55:11 Check angles 15:55:11 SkyScan query 15:55:12 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.51<-17434 Statuses=0009 0009 15:55:12 Msec=0 True Az=109.17 Ze=-81.51 Az status=0009 Ze status=0009 15:55:12 Check angles 15:55:12 SkyScan query 15:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 15:55:12 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 15:55:13 Check angles 15:55:13 SkyScan query 15:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 15:55:13 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 15:55:13 Check angles 15:55:13 SkyScan query 15:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 15:55:14 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 15:55:14 Check angles 15:55:14 SkyScan query 15:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.315<-23021 Statuses=0008 0009 15:55:15 Msec=3000 True Az=112.995 Ze=-165.315 Az status=0008 Ze status=0009 15:55:15 Check angles 15:55:15 SkyScan query 15:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:55:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:55:15 Message to Master queued w/err=0: serial=279548 error=0 15:55:20 Received message from Master: op=Filter serial=279549 15:55:20 Color wheel filter change from 0 to 0 15:55:20 FLIGetFilterPos err=0 currentPosition=0 15:55:20 FLIGetStepsRemaining err=0 RemainingSteps=0 15:55:20 Filter is already there-color wheel unchanged 15:55:21 Received message from Master: op=Shutter serial=279550 15:55:21 Shutter LASER open 15:55:21 Received message from Camera: op=State serial=279552 15:55:21 GetSingleValue result=40 Value=cccccccc 15:55:21 SkyScan query 15:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:55:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:21 Parameters OK 15:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:21 Set A/D data flow result=40 15:55:21 Set A/D channel type result=40 15:55:21 Set A/D encoding result=40 15:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:21 Set channel filter=0.000000e+000 result=40 15:55:21 Config A/D Result=40 15:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:21 Get A/D filter: -9.255963e+061 result=40 15:55:21 Get A/D value=-858993460 result=40 15:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:21 Parameters OK 15:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:21 Set A/D data flow result=40 15:55:21 Set A/D channel type result=40 15:55:21 Set A/D encoding result=40 15:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:21 Set channel filter=0.000000e+000 result=40 15:55:21 Config A/D Result=40 15:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:21 Get A/D filter: -9.255963e+061 result=40 15:55:21 Get A/D value=-858993460 result=40 15:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:55:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:55:21 Aux= 15:55:21 Message to Camera, serial 279552 queued 15:55:30 Received message from Master: op=Shutter serial=279562 15:55:30 Shutter LASER close 15:55:30 Received message from Master: op=PointingHead serial=279566 15:55:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:55:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:55:31 Point started: ret=0 15:55:31 point_skyscan result=0 15:55:31 Check angles 15:55:31 SkyScan query 15:55:32 SkyScan query done: ret=0 az=90<-6000 ze=157.32<-1512 Statuses=0009 0009 15:55:32 Msec=0 True Az=90 Ze=157.32 Az status=0009 Ze status=0009 15:55:32 Check angles 15:55:32 SkyScan query 15:55:33 SkyScan query done: ret=0 az=72.525<-4835 ze=136.335<-2911 Statuses=0009 0009 15:55:33 Msec=750 True Az=72.525 Ze=136.335 Az status=0009 Ze status=0009 15:55:33 Check angles 15:55:33 SkyScan query 15:55:34 SkyScan query done: ret=0 az=55.125<-3675 ze=115.455<-4303 Statuses=0009 0009 15:55:34 Msec=1500 True Az=55.125 Ze=115.455 Az status=0009 Ze status=0009 [UTC 2018-12-19 15:55:34] 15:55:34 Check angles 15:55:34 SkyScan query 15:55:34 SkyScan query done: ret=0 az=40.98<-2732 ze=92.7<-5820 Statuses=0009 0009 15:55:34 Msec=2250 True Az=40.98 Ze=92.7 Az status=0009 Ze status=0009 15:55:34 Check angles 15:55:34 SkyScan query 15:55:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.515<-7099 Statuses=0008 0009 15:55:35 Msec=3000 True Az=40.995 Ze=73.515 Az status=0008 Ze status=0009 15:55:35 Check angles 15:55:35 SkyScan query 15:55:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.89<-8474 Statuses=0008 0009 15:55:36 Msec=3750 True Az=40.995 Ze=52.89 Az status=0008 Ze status=0009 15:55:36 Check angles 15:55:36 SkyScan query 15:55:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:55:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:55:37 Message to Master queued w/err=0: serial=279566 error=0 15:55:42 Received message from Master: op=Filter serial=279567 15:55:42 Color wheel filter change from 0 to 0 15:55:42 FLIGetFilterPos err=0 currentPosition=0 15:55:42 FLIGetStepsRemaining err=0 RemainingSteps=0 15:55:42 Filter is already there-color wheel unchanged 15:55:42 Received message from Master: op=Shutter serial=279568 15:55:42 Shutter LASER close 15:55:42 Received message from Camera: op=State serial=279570 15:55:42 GetSingleValue result=40 Value=cccccccc 15:55:42 SkyScan query 15:55:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:55:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:42 Parameters OK 15:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:42 Set A/D data flow result=40 15:55:42 Set A/D channel type result=40 15:55:42 Set A/D encoding result=40 15:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:42 Set channel filter=0.000000e+000 result=40 15:55:42 Config A/D Result=40 15:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:42 Get A/D filter: -9.255963e+061 result=40 15:55:42 Get A/D value=-858993460 result=40 15:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:42 Parameters OK 15:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:42 Set A/D data flow result=40 15:55:42 Set A/D channel type result=40 15:55:42 Set A/D encoding result=40 15:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:42 Set channel filter=0.000000e+000 result=40 15:55:42 Config A/D Result=40 15:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:42 Get A/D filter: -9.255963e+061 result=40 15:55:42 Get A/D value=-858993460 result=40 15:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:55:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:55:42 Aux= 15:55:42 Message to Camera, serial 279570 queued [UTC 2018-12-19 15:55:52] 15:56:19 Received message from Master: op=PointingHead serial=279583 15:56:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:56:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:56:20 Point started: ret=0 15:56:20 point_skyscan result=0 15:56:20 Check angles 15:56:20 SkyScan query 15:56:21 SkyScan query done: ret=0 az=63.9<-4260 ze=66.525<-7565 Statuses=0009 0008 15:56:21 Msec=0 True Az=63.9 Ze=66.525 Az status=0009 Ze status=0008 15:56:21 Check angles 15:56:21 SkyScan query 15:56:22 SkyScan query done: ret=0 az=81.18<-5412 ze=66.51<-7566 Statuses=0009 0008 15:56:22 Msec=750 True Az=81.18 Ze=66.51 Az status=0009 Ze status=0008 15:56:22 Check angles 15:56:22 SkyScan query 15:56:22 SkyScan query done: ret=0 az=98.835<-6589 ze=66.495<-7567 Statuses=0009 0008 15:56:22 Msec=1500 True Az=98.835 Ze=66.495 Az status=0009 Ze status=0008 15:56:23 Check angles 15:56:23 SkyScan query 15:56:23 SkyScan query done: ret=0 az=116.1<-7740 ze=66.495<-7567 Statuses=0009 0008 15:56:23 Msec=2250 True Az=116.1 Ze=66.495 Az status=0009 Ze status=0008 15:56:23 Check angles 15:56:23 SkyScan query 15:56:24 SkyScan query done: ret=0 az=133.545<-8903 ze=66.495<-7567 Statuses=0009 0008 15:56:24 Msec=3000 True Az=133.545 Ze=66.495 Az status=0009 Ze status=0008 15:56:24 Check angles 15:56:24 SkyScan query 15:56:25 SkyScan query done: ret=0 az=151.035<-10069 ze=66.495<-7567 Statuses=0009 0008 15:56:25 Msec=3750 True Az=151.035 Ze=66.495 Az status=0009 Ze status=0008 15:56:25 Check angles 15:56:25 SkyScan query 15:56:25 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:56:25 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:56:25 Message to Master queued w/err=0: serial=279583 error=0 15:56:30 Received message from Master: op=Filter serial=279584 15:56:30 Color wheel filter change from 0 to 0 15:56:30 FLIGetFilterPos err=0 currentPosition=0 15:56:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:56:30 Filter is already there-color wheel unchanged 15:56:31 Received message from Master: op=Shutter serial=279585 15:56:31 Shutter LASER close 15:56:31 Received message from Camera: op=State serial=279587 15:56:31 GetSingleValue result=40 Value=cccccccc 15:56:31 SkyScan query 15:56:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:56:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:31 Parameters OK 15:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:31 Set A/D data flow result=40 15:56:31 Set A/D channel type result=40 15:56:31 Set A/D encoding result=40 15:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:31 Set channel filter=0.000000e+000 result=40 15:56:31 Config A/D Result=40 15:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:31 Get A/D filter: -9.255963e+061 result=40 15:56:31 Get A/D value=-858993460 result=40 15:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:31 Parameters OK 15:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:31 Set A/D data flow result=40 15:56:31 Set A/D channel type result=40 15:56:31 Set A/D encoding result=40 15:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:31 Set channel filter=0.000000e+000 result=40 15:56:31 Config A/D Result=40 15:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:31 Get A/D filter: -9.255963e+061 result=40 15:56:31 Get A/D value=-858993460 result=40 15:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:56:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:56:31 Aux= 15:56:31 Message to Camera, serial 279587 queued 15:57:08 Received message from Master: op=PointingHead serial=279600 15:57:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:57:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:57:08 Point started: ret=0 15:57:08 point_skyscan result=0 15:57:09 Check angles 15:57:09 SkyScan query 15:57:10 SkyScan query done: ret=0 az=135.015<-9001 ze=36.765<-9549 Statuses=0009 0009 15:57:10 Msec=0 True Az=135.015 Ze=36.765 Az status=0009 Ze status=0009 15:57:10 Check angles 15:57:10 SkyScan query 15:57:10 SkyScan query done: ret=0 az=117.105<-7807 ze=15.45<-10970 Statuses=0009 0009 15:57:10 Msec=750 True Az=117.105 Ze=15.45 Az status=0009 Ze status=0009 15:57:11 Check angles 15:57:11 SkyScan query 15:57:11 SkyScan query done: ret=0 az=99.705<-6647 ze=-5.55<-12370 Statuses=0009 0009 15:57:11 Msec=1500 True Az=99.705 Ze=-5.55 Az status=0009 Ze status=0009 15:57:11 Check angles 15:57:11 SkyScan query 15:57:12 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.535<-13769 Statuses=0009 0009 15:57:12 Msec=2250 True Az=82.29 Ze=-26.535 Az status=0009 Ze status=0009 15:57:12 Check angles 15:57:12 SkyScan query 15:57:13 SkyScan query done: ret=0 az=64.395<-4293 ze=-38.565<-14571 Statuses=0009 0008 15:57:13 Msec=3000 True Az=64.395 Ze=-38.565 Az status=0009 Ze status=0008 15:57:13 Check angles 15:57:13 SkyScan query 15:57:14 SkyScan query done: ret=0 az=46.935<-3129 ze=-38.535<-14569 Statuses=0009 0008 15:57:14 Msec=3750 True Az=46.935 Ze=-38.535 Az status=0009 Ze status=0008 15:57:14 Check angles 15:57:14 SkyScan query 15:57:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:57:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:57:14 Message to Master queued w/err=0: serial=279600 error=0 15:57:19 Received message from Master: op=Filter serial=279601 15:57:19 Color wheel filter change from 0 to 0 15:57:19 FLIGetFilterPos err=0 currentPosition=0 15:57:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:57:19 Filter is already there-color wheel unchanged 15:57:19 Received message from Master: op=Shutter serial=279602 15:57:19 Shutter LASER close 15:57:19 Received message from Camera: op=State serial=279604 15:57:19 GetSingleValue result=40 Value=cccccccc 15:57:19 SkyScan query 15:57:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:57:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:20 Parameters OK 15:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:20 Set A/D data flow result=40 15:57:20 Set A/D channel type result=40 15:57:20 Set A/D encoding result=40 15:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:20 Set channel filter=0.000000e+000 result=40 15:57:20 Config A/D Result=40 15:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:20 Get A/D filter: -9.255963e+061 result=40 15:57:20 Get A/D value=-858993460 result=40 15:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:20 Parameters OK 15:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:20 Set A/D data flow result=40 15:57:20 Set A/D channel type result=40 15:57:20 Set A/D encoding result=40 15:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:20 Set channel filter=0.000000e+000 result=40 15:57:20 Config A/D Result=40 15:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:20 Get A/D filter: -9.255963e+061 result=40 15:57:20 Get A/D value=-858993460 result=40 15:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:57:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:57:20 Aux= 15:57:20 Message to Camera, serial 279604 queued 15:57:57 Received message from Master: op=PointingHead serial=279617 15:57:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:57:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:57:57 Point started: ret=0 15:57:57 point_skyscan result=0 15:57:58 Check angles 15:57:58 SkyScan query 15:57:59 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.76<-16584 Statuses=0009 0009 15:57:59 Msec=0 True Az=64.425 Ze=-68.76 Az status=0009 Ze status=0009 15:57:59 Check angles 15:57:59 SkyScan query 15:57:59 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.715<-17981 Statuses=0009 0009 15:57:59 Msec=750 True Az=81.81 Ze=-89.715 Az status=0009 Ze status=0009 15:58:00 Check angles 15:58:00 SkyScan query 15:58:00 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.7<-19380 Statuses=0009 0009 15:58:00 Msec=1500 True Az=99.375 Ze=-110.7 Az status=0009 Ze status=0009 15:58:00 Check angles 15:58:00 SkyScan query 15:58:01 SkyScan query done: ret=0 az=117.225<-7815 ze=-132.03<-20802 Statuses=0009 0009 15:58:01 Msec=2250 True Az=117.225 Ze=-132.03 Az status=0009 Ze status=0009 15:58:01 Check angles 15:58:01 SkyScan query 15:58:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 15:58:02 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 15:58:02 Check angles 15:58:02 SkyScan query 15:58:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 15:58:02 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 15:58:02 Message to Master queued w/err=0: serial=279617 error=0 15:58:07 Received message from Master: op=Filter serial=279618 15:58:07 Color wheel filter change from 0 to 0 15:58:07 FLIGetFilterPos err=0 currentPosition=0 15:58:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:58:07 Filter is already there-color wheel unchanged 15:58:08 Received message from Master: op=Shutter serial=279619 15:58:08 Shutter LASER close 15:58:08 Received message from Camera: op=State serial=279621 15:58:08 GetSingleValue result=40 Value=cccccccc 15:58:08 SkyScan query 15:58:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:58:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:08 Parameters OK 15:58:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:08 Set A/D data flow result=40 15:58:08 Set A/D channel type result=40 15:58:08 Set A/D encoding result=40 15:58:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:08 Set channel filter=0.000000e+000 result=40 15:58:08 Config A/D Result=40 15:58:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:08 Get A/D filter: -9.255963e+061 result=40 15:58:08 Get A/D value=-858993460 result=40 15:58:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:08 Parameters OK 15:58:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:08 Set A/D data flow result=40 15:58:08 Set A/D channel type result=40 15:58:08 Set A/D encoding result=40 15:58:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:08 Set channel filter=0.000000e+000 result=40 15:58:08 Config A/D Result=40 15:58:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:08 Get A/D filter: -9.255963e+061 result=40 15:58:08 Get A/D value=-858993460 result=40 15:58:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:58:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:58:08 Aux= 15:58:08 Message to Camera, serial 279621 queued 15:58:45 Received message from Master: op=PointingHead serial=279634 15:58:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:58:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:58:45 Point started: ret=0 15:58:45 point_skyscan result=0 15:58:46 Check angles 15:58:46 SkyScan query 15:58:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.435<-23429 Statuses=0009 0009 15:58:47 Msec=0 True Az=113.01 Ze=-171.435 Az status=0009 Ze status=0009 15:58:47 Check angles 15:58:47 SkyScan query 15:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:58:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:58:47 Message to Master queued w/err=0: serial=279634 error=0 15:58:52 Received message from Master: op=Filter serial=279635 15:58:52 Color wheel filter change from 0 to 0 15:58:52 FLIGetFilterPos err=0 currentPosition=0 15:58:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:58:52 Filter is already there-color wheel unchanged 15:58:53 Received message from Master: op=Shutter serial=279636 15:58:53 Shutter LASER open 15:58:53 Received message from Camera: op=State serial=279638 15:58:53 GetSingleValue result=40 Value=cccccccc 15:58:53 SkyScan query 15:58:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:58:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:53 Parameters OK 15:58:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:53 Set A/D data flow result=40 15:58:53 Set A/D channel type result=40 15:58:53 Set A/D encoding result=40 15:58:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:53 Set channel filter=0.000000e+000 result=40 15:58:53 Config A/D Result=40 15:58:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:53 Get A/D filter: -9.255963e+061 result=40 15:58:53 Get A/D value=-858993460 result=40 15:58:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:53 Parameters OK 15:58:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:53 Set A/D data flow result=40 15:58:53 Set A/D channel type result=40 15:58:53 Set A/D encoding result=40 15:58:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:53 Set channel filter=0.000000e+000 result=40 15:58:53 Config A/D Result=40 15:58:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:53 Get A/D filter: -9.255963e+061 result=40 15:58:53 Get A/D value=-858993460 result=40 15:58:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:58:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:58:53 Aux= 15:58:53 Message to Camera, serial 279638 queued 15:59:02 Received message from Master: op=Shutter serial=279648 15:59:02 Shutter LASER close 15:59:02 Received message from Master: op=PointingHead serial=279652 15:59:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:59:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:59:03 Point started: ret=0 15:59:03 point_skyscan result=0 15:59:04 Check angles 15:59:04 SkyScan query 15:59:04 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.19<-21546 Statuses=0009 0009 15:59:04 Msec=0 True Az=135.9 Ze=-143.19 Az status=0009 Ze status=0009 15:59:04 Check angles 15:59:04 SkyScan query 15:59:05 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.25<-20150 Statuses=0009 0009 15:59:05 Msec=750 True Az=153.45 Ze=-122.25 Az status=0009 Ze status=0009 15:59:05 Check angles 15:59:05 SkyScan query 15:59:06 SkyScan query done: ret=0 az=171<-11400 ze=-101.355<-18757 Statuses=0009 0009 15:59:06 Msec=1500 True Az=171 Ze=-101.355 Az status=0009 Ze status=0009 15:59:06 Check angles 15:59:06 SkyScan query 15:59:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.385<-17359 Statuses=0008 0009 15:59:06 Msec=2250 True Az=175.995 Ze=-80.385 Az status=0008 Ze status=0009 15:59:07 Check angles 15:59:07 SkyScan query 15:59:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.415<-15961 Statuses=0008 0009 15:59:07 Msec=3000 True Az=176.01 Ze=-59.415 Az status=0008 Ze status=0009 15:59:07 Check angles 15:59:07 SkyScan query 15:59:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:59:08 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:59:08 Message to Master queued w/err=0: serial=279652 error=0 15:59:13 Received message from Master: op=Filter serial=279653 15:59:13 Color wheel filter change from 0 to 0 15:59:13 FLIGetFilterPos err=0 currentPosition=0 15:59:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:59:13 Filter is already there-color wheel unchanged 15:59:13 Received message from Master: op=Shutter serial=279654 15:59:13 Shutter LASER close 15:59:13 Received message from Camera: op=State serial=279656 15:59:13 GetSingleValue result=40 Value=cccccccc 15:59:13 SkyScan query 15:59:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:59:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:14 Parameters OK 15:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:14 Set A/D data flow result=40 15:59:14 Set A/D channel type result=40 15:59:14 Set A/D encoding result=40 15:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:14 Set channel filter=0.000000e+000 result=40 15:59:14 Config A/D Result=40 15:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:14 Get A/D filter: -9.255963e+061 result=40 15:59:14 Get A/D value=-858993460 result=40 15:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:14 Parameters OK 15:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:14 Set A/D data flow result=40 15:59:14 Set A/D channel type result=40 15:59:14 Set A/D encoding result=40 15:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:14 Set channel filter=0.000000e+000 result=40 15:59:14 Config A/D Result=40 15:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:14 Get A/D filter: -9.255963e+061 result=40 15:59:14 Get A/D value=-858993460 result=40 15:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:59:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:59:14 Aux= 15:59:14 Message to Camera, serial 279656 queued 15:59:51 Received message from Master: op=PointingHead serial=279669 15:59:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:59:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:59:51 Point started: ret=0 15:59:51 point_skyscan result=0 15:59:52 Check angles 15:59:52 SkyScan query 15:59:52 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.96<-13464 Statuses=0009 0009 15:59:52 Msec=0 True Az=153.165 Ze=-21.96 Az status=0009 Ze status=0009 15:59:52 Check angles 15:59:52 SkyScan query 15:59:53 SkyScan query done: ret=0 az=135.69<-9046 ze=-0.975<-12065 Statuses=0009 0009 15:59:53 Msec=750 True Az=135.69 Ze=-0.975 Az status=0009 Ze status=0009 15:59:53 Check angles 15:59:53 SkyScan query 15:59:54 SkyScan query done: ret=0 az=118.185<-7879 ze=19.95<-10670 Statuses=0009 0009 15:59:54 Msec=1500 True Az=118.185 Ze=19.95 Az status=0009 Ze status=0009 15:59:54 Check angles 15:59:54 SkyScan query 15:59:55 SkyScan query done: ret=0 az=100.785<-6719 ze=40.965<-9269 Statuses=0009 0009 15:59:55 Msec=2250 True Az=100.785 Ze=40.965 Az status=0009 Ze status=0009 15:59:55 Check angles 15:59:55 SkyScan query 15:59:55 SkyScan query done: ret=0 az=85.965<-5731 ze=51.57<-8562 Statuses=0009 0008 15:59:55 Msec=3000 True Az=85.965 Ze=51.57 Az status=0009 Ze status=0008 15:59:55 Check angles 15:59:55 SkyScan query 15:59:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:59:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:59:56 Message to Master queued w/err=0: serial=279669 error=0 16:00:01 Received message from Master: op=Filter serial=279670 16:00:01 Color wheel filter change from 0 to 0 16:00:01 FLIGetFilterPos err=0 currentPosition=0 16:00:01 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:01 Filter is already there-color wheel unchanged 16:00:01 Received message from Master: op=Shutter serial=279671 16:00:01 Shutter LASER close 16:00:01 Received message from Camera: op=State serial=279673 16:00:01 GetSingleValue result=40 Value=cccccccc 16:00:01 SkyScan query 16:00:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:00:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:02 Parameters OK 16:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:02 Set A/D data flow result=40 16:00:02 Set A/D channel type result=40 16:00:02 Set A/D encoding result=40 16:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:02 Set channel filter=0.000000e+000 result=40 16:00:02 Config A/D Result=40 16:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:02 Get A/D filter: -9.255963e+061 result=40 16:00:02 Get A/D value=-858993460 result=40 16:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:02 Parameters OK 16:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:02 Set A/D data flow result=40 16:00:02 Set A/D channel type result=40 16:00:02 Set A/D encoding result=40 16:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:02 Set channel filter=0.000000e+000 result=40 16:00:02 Config A/D Result=40 16:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:02 Get A/D filter: -9.255963e+061 result=40 16:00:02 Get A/D value=-858993460 result=40 16:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:02 Aux= 16:00:02 Message to Camera, serial 279673 queued 16:00:38 Received message from Master: op=PointingHead serial=279685 16:00:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:00:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:00:38 Point started: ret=0 16:00:38 point_skyscan result=0 16:00:39 Check angles 16:00:39 SkyScan query 16:00:39 SkyScan query done: ret=0 az=108.945<-7263 ze=38.475<-9435 Statuses=0009 0008 16:00:39 Msec=0 True Az=108.945 Ze=38.475 Az status=0009 Ze status=0008 16:00:40 Check angles 16:00:40 SkyScan query 16:00:40 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 16:00:40 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 16:00:40 Check angles 16:00:40 SkyScan query 16:00:41 SkyScan query done: ret=0 az=143.985<-9599 ze=38.505<-9433 Statuses=0009 0008 16:00:41 Msec=1500 True Az=143.985 Ze=38.505 Az status=0009 Ze status=0008 16:00:41 Check angles 16:00:41 SkyScan query 16:00:42 SkyScan query done: ret=0 az=161.715<-10781 ze=38.505<-9433 Statuses=0009 0008 16:00:42 Msec=2250 True Az=161.715 Ze=38.505 Az status=0009 Ze status=0008 16:00:42 Check angles 16:00:42 SkyScan query 16:00:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:00:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:00:43 Check angles 16:00:43 SkyScan query 16:00:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:00:43 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:00:43 Message to Master queued w/err=0: serial=279685 error=0 16:00:48 Received message from Master: op=Filter serial=279686 16:00:48 Color wheel filter change from 0 to 0 16:00:48 FLIGetFilterPos err=0 currentPosition=0 16:00:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:48 Filter is already there-color wheel unchanged 16:00:48 Received message from Master: op=Shutter serial=279687 16:00:48 Shutter LASER close 16:00:48 Received message from Camera: op=State serial=279689 16:00:48 GetSingleValue result=40 Value=cccccccc 16:00:48 SkyScan query 16:00:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:00:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:49 Parameters OK 16:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:49 Set A/D data flow result=40 16:00:49 Set A/D channel type result=40 16:00:49 Set A/D encoding result=40 16:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:49 Set channel filter=0.000000e+000 result=40 16:00:49 Config A/D Result=40 16:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:49 Get A/D filter: -9.255963e+061 result=40 16:00:49 Get A/D value=-858993460 result=40 16:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:49 Parameters OK 16:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:49 Set A/D data flow result=40 16:00:49 Set A/D channel type result=40 16:00:49 Set A/D encoding result=40 16:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:49 Set channel filter=0.000000e+000 result=40 16:00:49 Config A/D Result=40 16:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:49 Get A/D filter: -9.255963e+061 result=40 16:00:49 Get A/D value=-858993460 result=40 16:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:49 Aux= 16:00:49 Message to Camera, serial 279689 queued 16:01:26 Received message from Master: op=PointingHead serial=279702 16:01:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:01:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:01:26 Point started: ret=0 16:01:26 point_skyscan result=0 16:01:27 Check angles 16:01:27 SkyScan query 16:01:27 SkyScan query done: ret=0 az=152.535<-10169 ze=8.37<-11442 Statuses=0009 0009 16:01:27 Msec=0 True Az=152.535 Ze=8.37 Az status=0009 Ze status=0009 16:01:28 Check angles 16:01:28 SkyScan query 16:01:28 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.585<-12839 Statuses=0009 0009 16:01:28 Msec=750 True Az=135.135 Ze=-12.585 Az status=0009 Ze status=0009 16:01:28 Check angles 16:01:28 SkyScan query 16:01:29 SkyScan query done: ret=0 az=117.27<-7818 ze=-34.05<-14270 Statuses=0009 0009 16:01:29 Msec=1500 True Az=117.27 Ze=-34.05 Az status=0009 Ze status=0009 16:01:29 Check angles 16:01:29 SkyScan query 16:01:30 SkyScan query done: ret=0 az=99.48<-6632 ze=-51.57<-15438 Statuses=0009 0009 16:01:30 Msec=2250 True Az=99.48 Ze=-51.57 Az status=0009 Ze status=0009 16:01:30 Check angles 16:01:30 SkyScan query 16:01:30 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 16:01:30 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 16:01:31 Check angles 16:01:31 SkyScan query 16:01:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:01:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:01:31 Message to Master queued w/err=0: serial=279702 error=0 16:01:36 Received message from Master: op=Filter serial=279703 16:01:36 Color wheel filter change from 0 to 0 16:01:36 FLIGetFilterPos err=0 currentPosition=0 16:01:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:01:36 Filter is already there-color wheel unchanged 16:01:36 Received message from Master: op=Shutter serial=279704 16:01:36 Shutter LASER close 16:01:36 Received message from Camera: op=State serial=279706 16:01:36 GetSingleValue result=40 Value=cccccccc 16:01:36 SkyScan query 16:01:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:01:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:37 Parameters OK 16:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:37 Set A/D data flow result=40 16:01:37 Set A/D channel type result=40 16:01:37 Set A/D encoding result=40 16:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:37 Set channel filter=0.000000e+000 result=40 16:01:37 Config A/D Result=40 16:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:37 Get A/D filter: -9.255963e+061 result=40 16:01:37 Get A/D value=-858993460 result=40 16:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:37 Parameters OK 16:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:37 Set A/D data flow result=40 16:01:37 Set A/D channel type result=40 16:01:37 Set A/D encoding result=40 16:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:37 Set channel filter=0.000000e+000 result=40 16:01:37 Config A/D Result=40 16:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:37 Get A/D filter: -9.255963e+061 result=40 16:01:37 Get A/D value=-858993460 result=40 16:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:01:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:01:37 Aux= 16:01:37 Message to Camera, serial 279706 queued 16:02:14 Received message from Master: op=PointingHead serial=279719 16:02:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:02:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:02:14 Point started: ret=0 16:02:14 point_skyscan result=0 16:02:15 Check angles 16:02:15 SkyScan query 16:02:16 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.57<-17438 Statuses=0009 0009 16:02:16 Msec=0 True Az=109.2 Ze=-81.57 Az status=0009 Ze status=0009 16:02:16 Check angles 16:02:16 SkyScan query 16:02:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 16:02:16 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 16:02:16 Check angles 16:02:16 SkyScan query 16:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 16:02:17 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 16:02:17 Check angles 16:02:17 SkyScan query 16:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 16:02:18 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 16:02:18 Check angles 16:02:18 SkyScan query 16:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 16:02:19 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 16:02:19 Check angles 16:02:19 SkyScan query 16:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:02:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:02:19 Message to Master queued w/err=0: serial=279719 error=0 16:02:24 Received message from Master: op=Filter serial=279720 16:02:24 Color wheel filter change from 0 to 0 16:02:24 FLIGetFilterPos err=0 currentPosition=0 16:02:24 FLIGetStepsRemaining err=0 RemainingSteps=0 16:02:24 Filter is already there-color wheel unchanged 16:02:24 Received message from Master: op=Shutter serial=279721 16:02:24 Shutter LASER open 16:02:25 Received message from Camera: op=State serial=279723 16:02:25 GetSingleValue result=40 Value=cccccccc 16:02:25 SkyScan query 16:02:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:02:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:25 Parameters OK 16:02:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:25 Set A/D data flow result=40 16:02:25 Set A/D channel type result=40 16:02:25 Set A/D encoding result=40 16:02:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:25 Set channel filter=0.000000e+000 result=40 16:02:25 Config A/D Result=40 16:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:25 Get A/D filter: -9.255963e+061 result=40 16:02:25 Get A/D value=-858993460 result=40 16:02:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:25 Parameters OK 16:02:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:25 Set A/D data flow result=40 16:02:25 Set A/D channel type result=40 16:02:25 Set A/D encoding result=40 16:02:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:25 Set channel filter=0.000000e+000 result=40 16:02:25 Config A/D Result=40 16:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:25 Get A/D filter: -9.255963e+061 result=40 16:02:25 Get A/D value=-858993460 result=40 16:02:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:02:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:02:25 Aux= 16:02:25 Message to Camera, serial 279723 queued 16:02:34 Received message from Master: op=Shutter serial=279733 16:02:34 Shutter LASER close 16:02:34 Received message from Master: op=PointingHead serial=279737 16:02:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:02:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:02:34 Point started: ret=0 16:02:34 point_skyscan result=0 16:02:35 Check angles 16:02:35 SkyScan query 16:02:36 SkyScan query done: ret=0 az=89.835<-5989 ze=157.245<-1517 Statuses=0009 0009 16:02:36 Msec=0 True Az=89.835 Ze=157.245 Az status=0009 Ze status=0009 16:02:36 Check angles 16:02:36 SkyScan query 16:02:37 SkyScan query done: ret=0 az=72.51<-4834 ze=136.29<-2914 Statuses=0009 0009 16:02:37 Msec=750 True Az=72.51 Ze=136.29 Az status=0009 Ze status=0009 16:02:37 Check angles 16:02:37 SkyScan query 16:02:37 SkyScan query done: ret=0 az=55.02<-3668 ze=115.35<-4310 Statuses=0009 0009 16:02:37 Msec=1500 True Az=55.02 Ze=115.35 Az status=0009 Ze status=0009 16:02:37 Check angles 16:02:37 SkyScan query 16:02:38 SkyScan query done: ret=0 az=40.98<-2732 ze=93.96<-5736 Statuses=0009 0009 16:02:38 Msec=2250 True Az=40.98 Ze=93.96 Az status=0009 Ze status=0009 16:02:38 Check angles 16:02:38 SkyScan query 16:02:39 SkyScan query done: ret=0 az=40.995<-2733 ze=72.96<-7136 Statuses=0008 0009 16:02:39 Msec=3000 True Az=40.995 Ze=72.96 Az status=0008 Ze status=0009 16:02:39 Check angles 16:02:39 SkyScan query 16:02:40 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 16:02:40 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 16:02:40 Check angles 16:02:40 SkyScan query 16:02:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:02:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:02:40 Message to Master queued w/err=0: serial=279737 error=0 16:02:45 Received message from Master: op=Filter serial=279738 16:02:45 Color wheel filter change from 0 to 0 16:02:45 FLIGetFilterPos err=0 currentPosition=0 16:02:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:02:45 Filter is already there-color wheel unchanged 16:02:45 Received message from Master: op=Shutter serial=279739 16:02:45 Shutter LASER close 16:02:46 Received message from Camera: op=State serial=279741 16:02:46 GetSingleValue result=40 Value=cccccccc 16:02:46 SkyScan query 16:02:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:02:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:46 Parameters OK 16:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:46 Set A/D data flow result=40 16:02:46 Set A/D channel type result=40 16:02:46 Set A/D encoding result=40 16:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:46 Set channel filter=0.000000e+000 result=40 16:02:46 Config A/D Result=40 16:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:46 Get A/D filter: -9.255963e+061 result=40 16:02:46 Get A/D value=-858993460 result=40 16:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:46 Parameters OK 16:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:46 Set A/D data flow result=40 16:02:46 Set A/D channel type result=40 16:02:46 Set A/D encoding result=40 16:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:46 Set channel filter=0.000000e+000 result=40 16:02:46 Config A/D Result=40 16:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:46 Get A/D filter: -9.255963e+061 result=40 16:02:46 Get A/D value=-858993460 result=40 16:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:02:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:02:46 Aux= 16:02:46 Message to Camera, serial 279741 queued 16:03:23 Received message from Master: op=PointingHead serial=279754 16:03:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:03:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:03:23 Point started: ret=0 16:03:23 point_skyscan result=0 16:03:24 Check angles 16:03:24 SkyScan query 16:03:25 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 16:03:25 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 16:03:25 Check angles 16:03:25 SkyScan query 16:03:25 SkyScan query done: ret=0 az=81.345<-5423 ze=66.495<-7567 Statuses=0009 0008 16:03:25 Msec=750 True Az=81.345 Ze=66.495 Az status=0009 Ze status=0008 16:03:26 Check angles 16:03:26 SkyScan query 16:03:26 SkyScan query done: ret=0 az=98.82<-6588 ze=66.495<-7567 Statuses=0009 0008 16:03:26 Msec=1500 True Az=98.82 Ze=66.495 Az status=0009 Ze status=0008 16:03:26 Check angles 16:03:26 SkyScan query 16:03:27 SkyScan query done: ret=0 az=116.31<-7754 ze=66.495<-7567 Statuses=0009 0008 16:03:27 Msec=2250 True Az=116.31 Ze=66.495 Az status=0009 Ze status=0008 16:03:27 Check angles 16:03:27 SkyScan query 16:03:28 SkyScan query done: ret=0 az=133.725<-8915 ze=66.495<-7567 Statuses=0009 0008 16:03:28 Msec=3000 True Az=133.725 Ze=66.495 Az status=0009 Ze status=0008 16:03:28 Check angles 16:03:28 SkyScan query 16:03:28 SkyScan query done: ret=0 az=151.215<-10081 ze=66.495<-7567 Statuses=0009 0008 16:03:28 Msec=3750 True Az=151.215 Ze=66.495 Az status=0009 Ze status=0008 16:03:29 Check angles 16:03:29 SkyScan query 16:03:29 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:03:29 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:03:29 Message to Master queued w/err=0: serial=279754 error=0 16:03:34 Received message from Master: op=Filter serial=279755 16:03:34 Color wheel filter change from 0 to 0 16:03:34 FLIGetFilterPos err=0 currentPosition=0 16:03:34 FLIGetStepsRemaining err=0 RemainingSteps=0 16:03:34 Filter is already there-color wheel unchanged 16:03:34 Received message from Master: op=Shutter serial=279756 16:03:34 Shutter LASER close 16:03:34 Received message from Camera: op=State serial=279758 16:03:34 GetSingleValue result=40 Value=cccccccc 16:03:34 SkyScan query 16:03:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:03:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:35 Parameters OK 16:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:35 Set A/D data flow result=40 16:03:35 Set A/D channel type result=40 16:03:35 Set A/D encoding result=40 16:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:35 Set channel filter=0.000000e+000 result=40 16:03:35 Config A/D Result=40 16:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:35 Get A/D filter: -9.255963e+061 result=40 16:03:35 Get A/D value=-858993460 result=40 16:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:35 Parameters OK 16:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:35 Set A/D data flow result=40 16:03:35 Set A/D channel type result=40 16:03:35 Set A/D encoding result=40 16:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:35 Set channel filter=0.000000e+000 result=40 16:03:35 Config A/D Result=40 16:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:35 Get A/D filter: -9.255963e+061 result=40 16:03:35 Get A/D value=-858993460 result=40 16:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:03:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:03:35 Aux= 16:03:35 Message to Camera, serial 279758 queued 16:04:12 Received message from Master: op=PointingHead serial=279771 16:04:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:04:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:04:12 Point started: ret=0 16:04:12 point_skyscan result=0 16:04:13 Check angles 16:04:13 SkyScan query 16:04:14 SkyScan query done: ret=0 az=134.835<-8989 ze=36.69<-9554 Statuses=0009 0009 16:04:14 Msec=0 True Az=134.835 Ze=36.69 Az status=0009 Ze status=0009 16:04:14 Check angles 16:04:14 SkyScan query 16:04:14 SkyScan query done: ret=0 az=116.985<-7799 ze=15.33<-10978 Statuses=0009 0009 16:04:14 Msec=750 True Az=116.985 Ze=15.33 Az status=0009 Ze status=0009 16:04:14 Check angles 16:04:14 SkyScan query 16:04:15 SkyScan query done: ret=0 az=99.555<-6637 ze=-5.685<-12379 Statuses=0009 0009 16:04:15 Msec=1500 True Az=99.555 Ze=-5.685 Az status=0009 Ze status=0009 16:04:15 Check angles 16:04:15 SkyScan query 16:04:16 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.685<-13779 Statuses=0009 0009 16:04:16 Msec=2250 True Az=82.125 Ze=-26.685 Az status=0009 Ze status=0009 16:04:16 Check angles 16:04:16 SkyScan query 16:04:17 SkyScan query done: ret=0 az=64.23<-4282 ze=-38.58<-14572 Statuses=0009 0008 16:04:17 Msec=3000 True Az=64.23 Ze=-38.58 Az status=0009 Ze status=0008 16:04:17 Check angles 16:04:17 SkyScan query 16:04:17 SkyScan query done: ret=0 az=46.74<-3116 ze=-38.52<-14568 Statuses=0009 0008 16:04:17 Msec=3750 True Az=46.74 Ze=-38.52 Az status=0009 Ze status=0008 16:04:17 Check angles 16:04:17 SkyScan query 16:04:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:04:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:04:18 Message to Master queued w/err=0: serial=279771 error=0 16:04:23 Received message from Master: op=Filter serial=279772 16:04:23 Color wheel filter change from 0 to 0 16:04:23 FLIGetFilterPos err=0 currentPosition=0 16:04:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:04:23 Filter is already there-color wheel unchanged 16:04:23 Received message from Master: op=Shutter serial=279773 16:04:23 Shutter LASER close 16:04:23 Received message from Camera: op=State serial=279775 16:04:23 GetSingleValue result=40 Value=cccccccc 16:04:23 SkyScan query 16:04:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:04:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:24 Parameters OK 16:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:24 Set A/D data flow result=40 16:04:24 Set A/D channel type result=40 16:04:24 Set A/D encoding result=40 16:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:24 Set channel filter=0.000000e+000 result=40 16:04:24 Config A/D Result=40 16:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:24 Get A/D filter: -9.255963e+061 result=40 16:04:24 Get A/D value=-858993460 result=40 16:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:24 Parameters OK 16:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:24 Set A/D data flow result=40 16:04:24 Set A/D channel type result=40 16:04:24 Set A/D encoding result=40 16:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:24 Set channel filter=0.000000e+000 result=40 16:04:24 Config A/D Result=40 16:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:24 Get A/D filter: -9.255963e+061 result=40 16:04:24 Get A/D value=-858993460 result=40 16:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:04:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:04:24 Aux= 16:04:24 Message to Camera, serial 279775 queued 16:05:01 Received message from Master: op=PointingHead serial=279788 16:05:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:05:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:05:01 Point started: ret=0 16:05:01 point_skyscan result=0 16:05:02 Check angles 16:05:02 SkyScan query 16:05:02 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.64<-16576 Statuses=0009 0009 16:05:02 Msec=0 True Az=64.425 Ze=-68.64 Az status=0009 Ze status=0009 16:05:03 Check angles 16:05:03 SkyScan query 16:05:03 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.685<-17979 Statuses=0009 0009 16:05:03 Msec=750 True Az=81.9 Ze=-89.685 Az status=0009 Ze status=0009 16:05:03 Check angles 16:05:03 SkyScan query 16:05:04 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.58<-19372 Statuses=0009 0009 16:05:04 Msec=1500 True Az=99.405 Ze=-110.58 Az status=0009 Ze status=0009 16:05:04 Check angles 16:05:04 SkyScan query 16:05:05 SkyScan query done: ret=0 az=117.255<-7817 ze=-131.91<-20794 Statuses=0009 0009 16:05:05 Msec=2250 True Az=117.255 Ze=-131.91 Az status=0009 Ze status=0009 16:05:05 Check angles 16:05:05 SkyScan query 16:05:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 16:05:05 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 16:05:06 Check angles 16:05:06 SkyScan query 16:05:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 16:05:06 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 16:05:06 Message to Master queued w/err=0: serial=279788 error=0 16:05:11 Received message from Master: op=Filter serial=279789 16:05:11 Color wheel filter change from 0 to 0 16:05:11 FLIGetFilterPos err=0 currentPosition=0 16:05:11 FLIGetStepsRemaining err=0 RemainingSteps=0 16:05:11 Filter is already there-color wheel unchanged 16:05:11 Received message from Master: op=Shutter serial=279790 16:05:11 Shutter LASER close 16:05:11 Received message from Camera: op=State serial=279792 16:05:11 GetSingleValue result=40 Value=cccccccc 16:05:11 SkyScan query 16:05:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:05:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:12 Parameters OK 16:05:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:12 Set A/D data flow result=40 16:05:12 Set A/D channel type result=40 16:05:12 Set A/D encoding result=40 16:05:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:12 Set channel filter=0.000000e+000 result=40 16:05:12 Config A/D Result=40 16:05:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:12 Get A/D filter: -9.255963e+061 result=40 16:05:12 Get A/D value=-858993460 result=40 16:05:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:12 Parameters OK 16:05:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:12 Set A/D data flow result=40 16:05:12 Set A/D channel type result=40 16:05:12 Set A/D encoding result=40 16:05:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:12 Set channel filter=0.000000e+000 result=40 16:05:12 Config A/D Result=40 16:05:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:12 Get A/D filter: -9.255963e+061 result=40 16:05:12 Get A/D value=-858993460 result=40 16:05:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:05:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:05:12 Aux= 16:05:12 Message to Camera, serial 279792 queued 16:05:48 Received message from Master: op=PointingHead serial=279804 16:05:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:05:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:05:48 Point started: ret=0 16:05:48 point_skyscan result=0 16:05:49 Check angles 16:05:49 SkyScan query 16:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0009 0009 16:05:50 Msec=0 True Az=112.995 Ze=-171.09 Az status=0009 Ze status=0009 16:05:50 Check angles 16:05:50 SkyScan query 16:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:05:50 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:05:50 Message to Master queued w/err=0: serial=279804 error=0 16:05:55 Received message from Master: op=Filter serial=279805 16:05:55 Color wheel filter change from 0 to 0 16:05:55 FLIGetFilterPos err=0 currentPosition=0 16:05:55 FLIGetStepsRemaining err=0 RemainingSteps=0 16:05:55 Filter is already there-color wheel unchanged 16:05:56 Received message from Master: op=Shutter serial=279806 16:05:56 Shutter LASER open 16:05:56 Received message from Camera: op=State serial=279808 16:05:56 GetSingleValue result=40 Value=cccccccc 16:05:56 SkyScan query 16:05:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:05:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:56 Parameters OK 16:05:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:56 Set A/D data flow result=40 16:05:56 Set A/D channel type result=40 16:05:56 Set A/D encoding result=40 16:05:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:56 Set channel filter=0.000000e+000 result=40 16:05:56 Config A/D Result=40 16:05:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:56 Get A/D filter: -9.255963e+061 result=40 16:05:56 Get A/D value=-858993460 result=40 16:05:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:56 Parameters OK 16:05:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:56 Set A/D data flow result=40 16:05:56 Set A/D channel type result=40 16:05:56 Set A/D encoding result=40 16:05:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:56 Set channel filter=0.000000e+000 result=40 16:05:56 Config A/D Result=40 16:05:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:56 Get A/D filter: -9.255963e+061 result=40 16:05:56 Get A/D value=-858993460 result=40 16:05:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:05:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:05:56 Aux= 16:05:56 Message to Camera, serial 279808 queued 16:06:05 Received message from Master: op=Shutter serial=279818 16:06:05 Shutter LASER close 16:06:05 Received message from Master: op=PointingHead serial=279822 16:06:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:06:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:06:06 Point started: ret=0 16:06:06 point_skyscan result=0 16:06:06 Check angles 16:06:06 SkyScan query 16:06:07 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.445<-21563 Statuses=0009 0009 16:06:07 Msec=0 True Az=135.915 Ze=-143.445 Az status=0009 Ze status=0009 16:06:07 Check angles 16:06:07 SkyScan query [UTC 2018-12-19 16:06:08] 16:06:08 SkyScan query done: ret=0 az=153.285<-10219 ze=-122.46<-20164 Statuses=0009 0009 16:06:08 Msec=750 True Az=153.285 Ze=-122.46 Az status=0009 Ze status=0009 16:06:08 Check angles 16:06:08 SkyScan query 16:06:09 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.58<-18772 Statuses=0009 0009 16:06:09 Msec=1500 True Az=170.79 Ze=-101.58 Az status=0009 Ze status=0009 16:06:09 Check angles 16:06:09 SkyScan query 16:06:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.58<-17372 Statuses=0008 0009 16:06:09 Msec=2250 True Az=175.995 Ze=-80.58 Az status=0008 Ze status=0009 16:06:09 Check angles 16:06:09 SkyScan query 16:06:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.64<-15976 Statuses=0008 0009 16:06:10 Msec=3000 True Az=176.01 Ze=-59.64 Az status=0008 Ze status=0009 16:06:10 Check angles 16:06:10 SkyScan query 16:06:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:06:11 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:06:11 Message to Master queued w/err=0: serial=279822 error=0 16:06:16 Received message from Master: op=Filter serial=279823 16:06:16 Color wheel filter change from 0 to 0 16:06:16 FLIGetFilterPos err=0 currentPosition=0 16:06:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:06:16 Filter is already there-color wheel unchanged 16:06:16 Received message from Master: op=Shutter serial=279824 16:06:16 Shutter LASER close 16:06:16 Received message from Camera: op=State serial=279826 16:06:16 GetSingleValue result=40 Value=cccccccc 16:06:16 SkyScan query 16:06:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:06:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:17 Parameters OK 16:06:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:17 Set A/D data flow result=40 16:06:17 Set A/D channel type result=40 16:06:17 Set A/D encoding result=40 16:06:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:17 Set channel filter=0.000000e+000 result=40 16:06:17 Config A/D Result=40 16:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:17 Get A/D filter: -9.255963e+061 result=40 16:06:17 Get A/D value=-858993460 result=40 16:06:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:17 Parameters OK 16:06:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:17 Set A/D data flow result=40 16:06:17 Set A/D channel type result=40 16:06:17 Set A/D encoding result=40 16:06:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:17 Set channel filter=0.000000e+000 result=40 16:06:17 Config A/D Result=40 16:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:17 Get A/D filter: -9.255963e+061 result=40 16:06:17 Get A/D value=-858993460 result=40 16:06:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:06:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:06:17 Aux= 16:06:17 Message to Camera, serial 279826 queued 16:06:54 Received message from Master: op=PointingHead serial=279839 16:06:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:06:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:06:54 Point started: ret=0 16:06:54 point_skyscan result=0 16:06:55 Check angles 16:06:55 SkyScan query 16:06:55 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.75<-13450 Statuses=0009 0009 16:06:55 Msec=0 True Az=152.97 Ze=-21.75 Az status=0009 Ze status=0009 16:06:55 Check angles 16:06:55 SkyScan query 16:06:56 SkyScan query done: ret=0 az=135.555<-9037 ze=-0.765<-12051 Statuses=0009 0009 16:06:56 Msec=750 True Az=135.555 Ze=-0.765 Az status=0009 Ze status=0009 16:06:56 Check angles 16:06:56 SkyScan query 16:06:57 SkyScan query done: ret=0 az=118.065<-7871 ze=20.145<-10657 Statuses=0009 0009 16:06:57 Msec=1500 True Az=118.065 Ze=20.145 Az status=0009 Ze status=0009 16:06:57 Check angles 16:06:57 SkyScan query 16:06:57 SkyScan query done: ret=0 az=100.335<-6689 ze=41.55<-9230 Statuses=0009 0009 16:06:57 Msec=2250 True Az=100.335 Ze=41.55 Az status=0009 Ze status=0009 16:06:58 Check angles 16:06:58 SkyScan query 16:06:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 16:06:58 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 16:06:58 Check angles 16:06:58 SkyScan query 16:06:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:06:59 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:06:59 Message to Master queued w/err=0: serial=279839 error=0 16:07:04 Received message from Master: op=Filter serial=279840 16:07:04 Color wheel filter change from 0 to 0 16:07:04 FLIGetFilterPos err=0 currentPosition=0 16:07:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:04 Filter is already there-color wheel unchanged 16:07:04 Received message from Master: op=Shutter serial=279841 16:07:04 Shutter LASER close 16:07:04 Received message from Camera: op=State serial=279843 16:07:04 GetSingleValue result=40 Value=cccccccc 16:07:04 SkyScan query 16:07:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:07:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:05 Parameters OK 16:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:05 Set A/D data flow result=40 16:07:05 Set A/D channel type result=40 16:07:05 Set A/D encoding result=40 16:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:05 Set channel filter=0.000000e+000 result=40 16:07:05 Config A/D Result=40 16:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:05 Get A/D filter: -9.255963e+061 result=40 16:07:05 Get A/D value=-858993460 result=40 16:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:05 Parameters OK 16:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:05 Set A/D data flow result=40 16:07:05 Set A/D channel type result=40 16:07:05 Set A/D encoding result=40 16:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:05 Set channel filter=0.000000e+000 result=40 16:07:05 Config A/D Result=40 16:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:05 Get A/D filter: -9.255963e+061 result=40 16:07:05 Get A/D value=-858993460 result=40 16:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:05 Aux= 16:07:05 Message to Camera, serial 279843 queued 16:07:42 Received message from Master: op=PointingHead serial=279856 16:07:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:07:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:07:42 Point started: ret=0 16:07:42 point_skyscan result=0 16:07:43 Check angles 16:07:43 SkyScan query 16:07:43 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 16:07:43 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 16:07:43 Check angles 16:07:43 SkyScan query 16:07:44 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 16:07:44 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 16:07:44 Check angles 16:07:44 SkyScan query 16:07:45 SkyScan query done: ret=0 az=143.775<-9585 ze=38.505<-9433 Statuses=0009 0008 16:07:45 Msec=1500 True Az=143.775 Ze=38.505 Az status=0009 Ze status=0008 16:07:45 Check angles 16:07:45 SkyScan query 16:07:46 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 16:07:46 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 16:07:46 Check angles 16:07:46 SkyScan query 16:07:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:07:46 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:07:46 Check angles 16:07:46 SkyScan query 16:07:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:07:47 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:07:47 Message to Master queued w/err=0: serial=279856 error=0 16:07:52 Received message from Master: op=Filter serial=279857 16:07:52 Color wheel filter change from 0 to 0 16:07:52 FLIGetFilterPos err=0 currentPosition=0 16:07:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:52 Filter is already there-color wheel unchanged 16:07:52 Received message from Master: op=Shutter serial=279858 16:07:52 Shutter LASER close 16:07:52 Received message from Camera: op=State serial=279860 16:07:52 GetSingleValue result=40 Value=cccccccc 16:07:52 SkyScan query 16:07:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:07:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:53 Parameters OK 16:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:53 Set A/D data flow result=40 16:07:53 Set A/D channel type result=40 16:07:53 Set A/D encoding result=40 16:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:53 Set channel filter=0.000000e+000 result=40 16:07:53 Config A/D Result=40 16:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:53 Get A/D filter: -9.255963e+061 result=40 16:07:53 Get A/D value=-858993460 result=40 16:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:53 Parameters OK 16:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:53 Set A/D data flow result=40 16:07:53 Set A/D channel type result=40 16:07:53 Set A/D encoding result=40 16:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:53 Set channel filter=0.000000e+000 result=40 16:07:53 Config A/D Result=40 16:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:53 Get A/D filter: -9.255963e+061 result=40 16:07:53 Get A/D value=-858993460 result=40 16:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:53 Aux= 16:07:53 Message to Camera, serial 279860 queued 16:08:30 Received message from Master: op=PointingHead serial=279873 16:08:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:08:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:08:30 Point started: ret=0 16:08:30 point_skyscan result=0 16:08:31 Check angles 16:08:31 SkyScan query 16:08:31 SkyScan query done: ret=0 az=152.94<-10196 ze=8.625<-11425 Statuses=0009 0009 16:08:31 Msec=0 True Az=152.94 Ze=8.625 Az status=0009 Ze status=0009 16:08:31 Check angles 16:08:31 SkyScan query 16:08:32 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.27<-12818 Statuses=0009 0009 16:08:32 Msec=750 True Az=135.39 Ze=-12.27 Az status=0009 Ze status=0009 16:08:32 Check angles 16:08:32 SkyScan query 16:08:33 SkyScan query done: ret=0 az=117.87<-7858 ze=-33.3<-14220 Statuses=0009 0009 16:08:33 Msec=1500 True Az=117.87 Ze=-33.3 Az status=0009 Ze status=0009 16:08:33 Check angles 16:08:33 SkyScan query 16:08:34 SkyScan query done: ret=0 az=100.5<-6700 ze=-51.54<-15436 Statuses=0009 0009 16:08:34 Msec=2250 True Az=100.5 Ze=-51.54 Az status=0009 Ze status=0009 16:08:34 Check angles 16:08:34 SkyScan query 16:08:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:08:34 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:08:34 Check angles 16:08:34 SkyScan query 16:08:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:08:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:08:35 Message to Master queued w/err=0: serial=279873 error=0 16:08:40 Received message from Master: op=Filter serial=279874 16:08:40 Color wheel filter change from 0 to 0 16:08:40 FLIGetFilterPos err=0 currentPosition=0 16:08:40 FLIGetStepsRemaining err=0 RemainingSteps=0 16:08:40 Filter is already there-color wheel unchanged 16:08:40 Received message from Master: op=Shutter serial=279875 16:08:40 Shutter LASER close 16:08:40 Received message from Camera: op=State serial=279877 16:08:40 GetSingleValue result=40 Value=cccccccc 16:08:40 SkyScan query 16:08:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:08:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:41 Parameters OK 16:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:41 Set A/D data flow result=40 16:08:41 Set A/D channel type result=40 16:08:41 Set A/D encoding result=40 16:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:41 Set channel filter=0.000000e+000 result=40 16:08:41 Config A/D Result=40 16:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:41 Get A/D filter: -9.255963e+061 result=40 16:08:41 Get A/D value=-858993460 result=40 16:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:41 Parameters OK 16:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:41 Set A/D data flow result=40 16:08:41 Set A/D channel type result=40 16:08:41 Set A/D encoding result=40 16:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:41 Set channel filter=0.000000e+000 result=40 16:08:41 Config A/D Result=40 16:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:41 Get A/D filter: -9.255963e+061 result=40 16:08:41 Get A/D value=-858993460 result=40 16:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:08:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:08:41 Aux= 16:08:41 Message to Camera, serial 279877 queued 16:09:18 Received message from Master: op=PointingHead serial=279890 16:09:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:09:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:09:18 Point started: ret=0 16:09:18 point_skyscan result=0 16:09:19 Check angles 16:09:19 SkyScan query 16:09:19 SkyScan query done: ret=0 az=108.84<-7256 ze=-81<-17400 Statuses=0009 0009 16:09:19 Msec=0 True Az=108.84 Ze=-81 Az status=0009 Ze status=0009 16:09:20 Check angles 16:09:20 SkyScan query 16:09:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 16:09:20 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 16:09:20 Check angles 16:09:20 SkyScan query 16:09:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.925<-20195 Statuses=0008 0009 16:09:21 Msec=1500 True Az=112.995 Ze=-122.925 Az status=0008 Ze status=0009 16:09:21 Check angles 16:09:21 SkyScan query 16:09:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 16:09:22 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 16:09:22 Check angles 16:09:22 SkyScan query 16:09:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 16:09:22 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 16:09:23 Check angles 16:09:23 SkyScan query 16:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:09:23 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:09:23 Message to Master queued w/err=0: serial=279890 error=0 16:09:28 Received message from Master: op=Filter serial=279891 16:09:28 Color wheel filter change from 0 to 0 16:09:28 FLIGetFilterPos err=0 currentPosition=0 16:09:28 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:28 Filter is already there-color wheel unchanged 16:09:28 Received message from Master: op=Shutter serial=279892 16:09:28 Shutter LASER open 16:09:29 Received message from Camera: op=State serial=279894 16:09:29 GetSingleValue result=40 Value=cccccccc 16:09:29 SkyScan query 16:09:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:09:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:29 Parameters OK 16:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:29 Set A/D data flow result=40 16:09:29 Set A/D channel type result=40 16:09:29 Set A/D encoding result=40 16:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:29 Set channel filter=0.000000e+000 result=40 16:09:29 Config A/D Result=40 16:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:29 Get A/D filter: -9.255963e+061 result=40 16:09:29 Get A/D value=-858993460 result=40 16:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:29 Parameters OK 16:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:29 Set A/D data flow result=40 16:09:29 Set A/D channel type result=40 16:09:29 Set A/D encoding result=40 16:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:29 Set channel filter=0.000000e+000 result=40 16:09:29 Config A/D Result=40 16:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:29 Get A/D filter: -9.255963e+061 result=40 16:09:29 Get A/D value=-858993460 result=40 16:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:29 Aux= 16:09:29 Message to Camera, serial 279894 queued 16:09:38 Received message from Master: op=Shutter serial=279904 16:09:38 Shutter LASER close 16:09:38 Received message from Master: op=PointingHead serial=279908 16:09:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:09:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:09:38 Point started: ret=0 16:09:38 point_skyscan result=0 16:09:39 Check angles 16:09:39 SkyScan query 16:09:40 SkyScan query done: ret=0 az=89.85<-5990 ze=157.095<-1527 Statuses=0009 0009 16:09:40 Msec=0 True Az=89.85 Ze=157.095 Az status=0009 Ze status=0009 16:09:40 Check angles 16:09:40 SkyScan query 16:09:41 SkyScan query done: ret=0 az=72.285<-4819 ze=136.155<-2923 Statuses=0009 0009 16:09:41 Msec=750 True Az=72.285 Ze=136.155 Az status=0009 Ze status=0009 16:09:41 Check angles 16:09:41 SkyScan query 16:09:41 SkyScan query done: ret=0 az=54.81<-3654 ze=115.2<-4320 Statuses=0009 0009 16:09:41 Msec=1500 True Az=54.81 Ze=115.2 Az status=0009 Ze status=0009 16:09:41 Check angles 16:09:41 SkyScan query 16:09:42 SkyScan query done: ret=0 az=40.98<-2732 ze=94.23<-5718 Statuses=0009 0009 16:09:42 Msec=2250 True Az=40.98 Ze=94.23 Az status=0009 Ze status=0009 16:09:42 Check angles 16:09:42 SkyScan query 16:09:43 SkyScan query done: ret=0 az=40.995<-2733 ze=73.26<-7116 Statuses=0008 0009 16:09:43 Msec=3000 True Az=40.995 Ze=73.26 Az status=0008 Ze status=0009 16:09:43 Check angles 16:09:43 SkyScan query 16:09:44 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 16:09:44 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 16:09:44 Check angles 16:09:44 SkyScan query 16:09:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:09:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:09:44 Message to Master queued w/err=0: serial=279908 error=0 16:09:49 Received message from Master: op=Filter serial=279909 16:09:49 Color wheel filter change from 0 to 0 16:09:49 FLIGetFilterPos err=0 currentPosition=0 16:09:49 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:49 Filter is already there-color wheel unchanged 16:09:49 Received message from Master: op=Shutter serial=279910 16:09:49 Shutter LASER close 16:09:50 Received message from Camera: op=State serial=279912 16:09:50 GetSingleValue result=40 Value=cccccccc 16:09:50 SkyScan query 16:09:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:09:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:50 Parameters OK 16:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:50 Set A/D data flow result=40 16:09:50 Set A/D channel type result=40 16:09:50 Set A/D encoding result=40 16:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:50 Set channel filter=0.000000e+000 result=40 16:09:50 Config A/D Result=40 16:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:50 Get A/D filter: -9.255963e+061 result=40 16:09:50 Get A/D value=-858993460 result=40 16:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:50 Parameters OK 16:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:50 Set A/D data flow result=40 16:09:50 Set A/D channel type result=40 16:09:50 Set A/D encoding result=40 16:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:50 Set channel filter=0.000000e+000 result=40 16:09:50 Config A/D Result=40 16:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:50 Get A/D filter: -9.255963e+061 result=40 16:09:50 Get A/D value=-858993460 result=40 16:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:50 Aux= 16:09:50 Message to Camera, serial 279912 queued 16:10:27 Received message from Master: op=PointingHead serial=279925 16:10:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:10:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:10:27 Point started: ret=0 16:10:27 point_skyscan result=0 16:10:28 Check angles 16:10:28 SkyScan query 16:10:29 SkyScan query done: ret=0 az=63.765<-4251 ze=66.54<-7564 Statuses=0009 0008 16:10:29 Msec=0 True Az=63.765 Ze=66.54 Az status=0009 Ze status=0008 16:10:29 Check angles 16:10:29 SkyScan query 16:10:29 SkyScan query done: ret=0 az=81.195<-5413 ze=66.51<-7566 Statuses=0009 0008 16:10:29 Msec=750 True Az=81.195 Ze=66.51 Az status=0009 Ze status=0008 16:10:30 Check angles 16:10:30 SkyScan query 16:10:30 SkyScan query done: ret=0 az=98.61<-6574 ze=66.495<-7567 Statuses=0009 0008 16:10:30 Msec=1500 True Az=98.61 Ze=66.495 Az status=0009 Ze status=0008 16:10:30 Check angles 16:10:30 SkyScan query 16:10:31 SkyScan query done: ret=0 az=116.025<-7735 ze=66.495<-7567 Statuses=0009 0008 16:10:31 Msec=2250 True Az=116.025 Ze=66.495 Az status=0009 Ze status=0008 16:10:31 Check angles 16:10:31 SkyScan query 16:10:32 SkyScan query done: ret=0 az=133.56<-8904 ze=66.495<-7567 Statuses=0009 0008 16:10:32 Msec=3000 True Az=133.56 Ze=66.495 Az status=0009 Ze status=0008 16:10:32 Check angles 16:10:32 SkyScan query 16:10:32 SkyScan query done: ret=0 az=151.395<-10093 ze=66.495<-7567 Statuses=0009 0008 16:10:32 Msec=3750 True Az=151.395 Ze=66.495 Az status=0009 Ze status=0008 16:10:33 Check angles 16:10:33 SkyScan query 16:10:33 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:10:33 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:10:33 Message to Master queued w/err=0: serial=279925 error=0 16:10:38 Received message from Master: op=Filter serial=279926 16:10:38 Color wheel filter change from 0 to 0 16:10:38 FLIGetFilterPos err=0 currentPosition=0 16:10:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:10:38 Filter is already there-color wheel unchanged 16:10:38 Received message from Master: op=Shutter serial=279927 16:10:38 Shutter LASER close 16:10:38 Received message from Camera: op=State serial=279929 16:10:38 GetSingleValue result=40 Value=cccccccc 16:10:38 SkyScan query 16:10:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:10:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:39 Parameters OK 16:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:39 Set A/D data flow result=40 16:10:39 Set A/D channel type result=40 16:10:39 Set A/D encoding result=40 16:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:39 Set channel filter=0.000000e+000 result=40 16:10:39 Config A/D Result=40 16:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:39 Get A/D filter: -9.255963e+061 result=40 16:10:39 Get A/D value=-858993460 result=40 16:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:39 Parameters OK 16:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:39 Set A/D data flow result=40 16:10:39 Set A/D channel type result=40 16:10:39 Set A/D encoding result=40 16:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:39 Set channel filter=0.000000e+000 result=40 16:10:39 Config A/D Result=40 16:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:39 Get A/D filter: -9.255963e+061 result=40 16:10:39 Get A/D value=-858993460 result=40 16:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:10:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:10:39 Aux= 16:10:39 Message to Camera, serial 279929 queued 16:11:16 Received message from Master: op=PointingHead serial=279942 16:11:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:11:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:11:16 Point started: ret=0 16:11:16 point_skyscan result=0 16:11:17 Check angles 16:11:17 SkyScan query 16:11:17 SkyScan query done: ret=0 az=134.775<-8985 ze=36.675<-9555 Statuses=0009 0009 16:11:17 Msec=0 True Az=134.775 Ze=36.675 Az status=0009 Ze status=0009 16:11:18 Check angles 16:11:18 SkyScan query 16:11:18 SkyScan query done: ret=0 az=117.315<-7821 ze=15.735<-10951 Statuses=0009 0009 16:11:18 Msec=750 True Az=117.315 Ze=15.735 Az status=0009 Ze status=0009 16:11:18 Check angles 16:11:18 SkyScan query 16:11:19 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.235<-12349 Statuses=0009 0009 16:11:19 Msec=1500 True Az=99.9 Ze=-5.235 Az status=0009 Ze status=0009 16:11:19 Check angles 16:11:19 SkyScan query 16:11:20 SkyScan query done: ret=0 az=82.065<-5471 ze=-26.655<-13777 Statuses=0009 0009 16:11:20 Msec=2250 True Az=82.065 Ze=-26.655 Az status=0009 Ze status=0009 16:11:20 Check angles 16:11:20 SkyScan query 16:11:21 SkyScan query done: ret=0 az=64.47<-4298 ze=-38.58<-14572 Statuses=0009 0008 16:11:21 Msec=3000 True Az=64.47 Ze=-38.58 Az status=0009 Ze status=0008 16:11:21 Check angles 16:11:21 SkyScan query 16:11:21 SkyScan query done: ret=0 az=47.055<-3137 ze=-38.52<-14568 Statuses=0009 0008 16:11:21 Msec=3750 True Az=47.055 Ze=-38.52 Az status=0009 Ze status=0008 16:11:21 Check angles 16:11:21 SkyScan query 16:11:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:11:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:11:22 Message to Master queued w/err=0: serial=279942 error=0 16:11:27 Received message from Master: op=Filter serial=279943 16:11:27 Color wheel filter change from 0 to 0 16:11:27 FLIGetFilterPos err=0 currentPosition=0 16:11:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:11:27 Filter is already there-color wheel unchanged 16:11:27 Received message from Master: op=Shutter serial=279944 16:11:27 Shutter LASER close 16:11:27 Received message from Camera: op=State serial=279946 16:11:27 GetSingleValue result=40 Value=cccccccc 16:11:27 SkyScan query 16:11:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:11:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:28 Parameters OK 16:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:28 Set A/D data flow result=40 16:11:28 Set A/D channel type result=40 16:11:28 Set A/D encoding result=40 16:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:28 Set channel filter=0.000000e+000 result=40 16:11:28 Config A/D Result=40 16:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:28 Get A/D filter: -9.255963e+061 result=40 16:11:28 Get A/D value=-858993460 result=40 16:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:28 Parameters OK 16:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:28 Set A/D data flow result=40 16:11:28 Set A/D channel type result=40 16:11:28 Set A/D encoding result=40 16:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:28 Set channel filter=0.000000e+000 result=40 16:11:28 Config A/D Result=40 16:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:28 Get A/D filter: -9.255963e+061 result=40 16:11:28 Get A/D value=-858993460 result=40 16:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:11:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:11:28 Aux= 16:11:28 Message to Camera, serial 279946 queued 16:12:05 Received message from Master: op=PointingHead serial=279959 16:12:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:12:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:12:05 Point started: ret=0 16:12:05 point_skyscan result=0 16:12:06 Check angles 16:12:06 SkyScan query 16:12:06 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.025<-16535 Statuses=0009 0009 16:12:06 Msec=0 True Az=63.765 Ze=-68.025 Az status=0009 Ze status=0009 16:12:06 Check angles 16:12:06 SkyScan query 16:12:07 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.43<-17962 Statuses=0009 0009 16:12:07 Msec=750 True Az=81.555 Ze=-89.43 Az status=0009 Ze status=0009 16:12:07 Check angles 16:12:07 SkyScan query 16:12:08 SkyScan query done: ret=0 az=99.045<-6603 ze=-110.37<-19358 Statuses=0009 0009 16:12:08 Msec=1500 True Az=99.045 Ze=-110.37 Az status=0009 Ze status=0009 16:12:08 Check angles 16:12:08 SkyScan query 16:12:09 SkyScan query done: ret=0 az=116.49<-7766 ze=-131.31<-20754 Statuses=0009 0009 16:12:09 Msec=2250 True Az=116.49 Ze=-131.31 Az status=0009 Ze status=0009 16:12:09 Check angles 16:12:09 SkyScan query 16:12:09 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 16:12:09 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 16:12:09 Check angles 16:12:09 SkyScan query 16:12:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 16:12:10 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 16:12:10 Message to Master queued w/err=0: serial=279959 error=0 16:12:15 Received message from Master: op=Filter serial=279960 16:12:15 Color wheel filter change from 0 to 0 16:12:15 FLIGetFilterPos err=0 currentPosition=0 16:12:15 FLIGetStepsRemaining err=0 RemainingSteps=0 16:12:15 Filter is already there-color wheel unchanged 16:12:15 Received message from Master: op=Shutter serial=279961 16:12:15 Shutter LASER close 16:12:15 Received message from Camera: op=State serial=279963 16:12:15 GetSingleValue result=40 Value=cccccccc 16:12:15 SkyScan query 16:12:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:12:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:16 Parameters OK 16:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:16 Set A/D data flow result=40 16:12:16 Set A/D channel type result=40 16:12:16 Set A/D encoding result=40 16:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:16 Set channel filter=0.000000e+000 result=40 16:12:16 Config A/D Result=40 16:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:16 Get A/D filter: -9.255963e+061 result=40 16:12:16 Get A/D value=-858993460 result=40 16:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:16 Parameters OK 16:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:16 Set A/D data flow result=40 16:12:16 Set A/D channel type result=40 16:12:16 Set A/D encoding result=40 16:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:16 Set channel filter=0.000000e+000 result=40 16:12:16 Config A/D Result=40 16:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:16 Get A/D filter: -9.255963e+061 result=40 16:12:16 Get A/D value=-858993460 result=40 16:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:12:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:12:16 Aux= 16:12:16 Message to Camera, serial 279963 queued 16:12:53 Received message from Master: op=PointingHead serial=279976 16:12:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:12:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:12:53 Point started: ret=0 16:12:53 point_skyscan result=0 16:12:54 Check angles 16:12:54 SkyScan query 16:12:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 16:12:54 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 16:12:55 Check angles 16:12:55 SkyScan query 16:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:12:55 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:12:55 Message to Master queued w/err=0: serial=279976 error=0 16:13:00 Received message from Master: op=Filter serial=279977 16:13:00 Color wheel filter change from 0 to 0 16:13:00 FLIGetFilterPos err=0 currentPosition=0 16:13:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:13:00 Filter is already there-color wheel unchanged 16:13:00 Received message from Master: op=Shutter serial=279978 16:13:00 Shutter LASER open 16:13:00 Received message from Camera: op=State serial=279980 16:13:00 GetSingleValue result=40 Value=cccccccc 16:13:00 SkyScan query 16:13:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:13:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:01 Parameters OK 16:13:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:01 Set A/D data flow result=40 16:13:01 Set A/D channel type result=40 16:13:01 Set A/D encoding result=40 16:13:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:01 Set channel filter=0.000000e+000 result=40 16:13:01 Config A/D Result=40 16:13:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:01 Get A/D filter: -9.255963e+061 result=40 16:13:01 Get A/D value=-858993460 result=40 16:13:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:01 Parameters OK 16:13:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:01 Set A/D data flow result=40 16:13:01 Set A/D channel type result=40 16:13:01 Set A/D encoding result=40 16:13:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:01 Set channel filter=0.000000e+000 result=40 16:13:01 Config A/D Result=40 16:13:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:01 Get A/D filter: -9.255963e+061 result=40 16:13:01 Get A/D value=-858993460 result=40 16:13:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:13:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:13:01 Aux= 16:13:01 Message to Camera, serial 279980 queued 16:13:09 Received message from Master: op=Shutter serial=279990 16:13:09 Shutter LASER close 16:13:10 Received message from Master: op=PointingHead serial=279994 16:13:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:13:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:13:10 Point started: ret=0 16:13:10 point_skyscan result=0 16:13:11 Check angles 16:13:11 SkyScan query 16:13:12 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.07<-21538 Statuses=0009 0009 16:13:12 Msec=0 True Az=136.095 Ze=-143.07 Az status=0009 Ze status=0009 16:13:12 Check angles 16:13:12 SkyScan query 16:13:13 SkyScan query done: ret=0 az=153.675<-10245 ze=-122.085<-20139 Statuses=0009 0009 16:13:13 Msec=750 True Az=153.675 Ze=-122.085 Az status=0009 Ze status=0009 16:13:13 Check angles 16:13:13 SkyScan query 16:13:13 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.16<-18744 Statuses=0009 0009 16:13:13 Msec=1500 True Az=171.105 Ze=-101.16 Az status=0009 Ze status=0009 16:13:13 Check angles 16:13:13 SkyScan query 16:13:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 16:13:14 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 16:13:14 Check angles 16:13:14 SkyScan query 16:13:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.265<-15951 Statuses=0008 0009 16:13:15 Msec=3000 True Az=176.01 Ze=-59.265 Az status=0008 Ze status=0009 16:13:15 Check angles 16:13:15 SkyScan query 16:13:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:13:16 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:13:16 Message to Master queued w/err=0: serial=279994 error=0 16:13:21 Received message from Master: op=Filter serial=279995 16:13:21 Color wheel filter change from 0 to 0 16:13:21 FLIGetFilterPos err=0 currentPosition=0 16:13:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:13:21 Filter is already there-color wheel unchanged 16:13:21 Received message from Master: op=Shutter serial=279996 16:13:21 Shutter LASER close 16:13:21 Received message from Camera: op=State serial=279998 16:13:21 GetSingleValue result=40 Value=cccccccc 16:13:21 SkyScan query 16:13:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:13:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:21 Parameters OK 16:13:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:21 Set A/D data flow result=40 16:13:21 Set A/D channel type result=40 16:13:21 Set A/D encoding result=40 16:13:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:21 Set channel filter=0.000000e+000 result=40 16:13:21 Config A/D Result=40 16:13:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:21 Get A/D filter: -9.255963e+061 result=40 16:13:21 Get A/D value=-858993460 result=40 16:13:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:21 Parameters OK 16:13:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:21 Set A/D data flow result=40 16:13:21 Set A/D channel type result=40 16:13:21 Set A/D encoding result=40 16:13:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:21 Set channel filter=0.000000e+000 result=40 16:13:21 Config A/D Result=40 16:13:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:21 Get A/D filter: -9.255963e+061 result=40 16:13:21 Get A/D value=-858993460 result=40 16:13:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:13:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:13:21 Aux= 16:13:21 Message to Camera, serial 279998 queued 16:13:58 Received message from Master: op=PointingHead serial=280011 16:13:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:13:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:13:59 Point started: ret=0 16:13:59 point_skyscan result=0 16:13:59 Check angles 16:13:59 SkyScan query 16:14:00 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.195<-13413 Statuses=0009 0009 16:14:00 Msec=0 True Az=152.58 Ze=-21.195 Az status=0009 Ze status=0009 16:14:00 Check angles 16:14:00 SkyScan query 16:14:01 SkyScan query done: ret=0 az=135.015<-9001 ze=-0.255<-12017 Statuses=0009 0009 16:14:01 Msec=750 True Az=135.015 Ze=-0.255 Az status=0009 Ze status=0009 16:14:01 Check angles 16:14:01 SkyScan query 16:14:01 SkyScan query done: ret=0 az=117.585<-7839 ze=20.685<-10621 Statuses=0009 0009 16:14:01 Msec=1500 True Az=117.585 Ze=20.685 Az status=0009 Ze status=0009 16:14:02 Check angles 16:14:02 SkyScan query 16:14:02 SkyScan query done: ret=0 az=99.765<-6651 ze=42.045<-9197 Statuses=0009 0009 16:14:02 Msec=2250 True Az=99.765 Ze=42.045 Az status=0009 Ze status=0009 16:14:02 Check angles 16:14:02 SkyScan query 16:14:03 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:14:03 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:14:03 Check angles 16:14:03 SkyScan query 16:14:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:14:04 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:14:04 Message to Master queued w/err=0: serial=280011 error=0 16:14:09 Received message from Master: op=Filter serial=280012 16:14:09 Color wheel filter change from 0 to 0 16:14:09 FLIGetFilterPos err=0 currentPosition=0 16:14:09 FLIGetStepsRemaining err=0 RemainingSteps=0 16:14:09 Filter is already there-color wheel unchanged 16:14:09 Received message from Master: op=Shutter serial=280013 16:14:09 Shutter LASER close 16:14:09 Received message from Camera: op=State serial=280015 16:14:09 GetSingleValue result=40 Value=cccccccc 16:14:09 SkyScan query 16:14:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:14:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:10 Parameters OK 16:14:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:10 Set A/D data flow result=40 16:14:10 Set A/D channel type result=40 16:14:10 Set A/D encoding result=40 16:14:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:10 Set channel filter=0.000000e+000 result=40 16:14:10 Config A/D Result=40 16:14:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:10 Get A/D filter: -9.255963e+061 result=40 16:14:10 Get A/D value=-858993460 result=40 16:14:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:10 Parameters OK 16:14:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:10 Set A/D data flow result=40 16:14:10 Set A/D channel type result=40 16:14:10 Set A/D encoding result=40 16:14:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:10 Set channel filter=0.000000e+000 result=40 16:14:10 Config A/D Result=40 16:14:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:10 Get A/D filter: -9.255963e+061 result=40 16:14:10 Get A/D value=-858993460 result=40 16:14:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:14:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:14:10 Aux= 16:14:10 Message to Camera, serial 280015 queued 16:14:46 Received message from Master: op=PointingHead serial=280028 16:14:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:14:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:14:47 Point started: ret=0 16:14:47 point_skyscan result=0 16:14:48 Check angles 16:14:48 SkyScan query 16:14:48 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 16:14:48 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 16:14:48 Check angles 16:14:48 SkyScan query 16:14:49 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 16:14:49 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 16:14:49 Check angles 16:14:49 SkyScan query 16:14:50 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 16:14:50 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 16:14:50 Check angles 16:14:50 SkyScan query 16:14:50 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 16:14:50 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 16:14:51 Check angles 16:14:51 SkyScan query 16:14:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:14:51 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:14:51 Check angles 16:14:51 SkyScan query 16:14:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:14:52 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:14:52 Message to Master queued w/err=0: serial=280028 error=0 16:14:57 Received message from Master: op=Filter serial=280029 16:14:57 Color wheel filter change from 0 to 0 16:14:57 FLIGetFilterPos err=0 currentPosition=0 16:14:57 FLIGetStepsRemaining err=0 RemainingSteps=0 16:14:57 Filter is already there-color wheel unchanged 16:14:57 Received message from Master: op=Shutter serial=280030 16:14:57 Shutter LASER close 16:14:57 Received message from Camera: op=State serial=280032 16:14:57 GetSingleValue result=40 Value=cccccccc 16:14:57 SkyScan query 16:14:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:14:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:58 Parameters OK 16:14:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:58 Set A/D data flow result=40 16:14:58 Set A/D channel type result=40 16:14:58 Set A/D encoding result=40 16:14:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:58 Set channel filter=0.000000e+000 result=40 16:14:58 Config A/D Result=40 16:14:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:58 Get A/D filter: -9.255963e+061 result=40 16:14:58 Get A/D value=-858993460 result=40 16:14:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:58 Parameters OK 16:14:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:58 Set A/D data flow result=40 16:14:58 Set A/D channel type result=40 16:14:58 Set A/D encoding result=40 16:14:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:58 Set channel filter=0.000000e+000 result=40 16:14:58 Config A/D Result=40 16:14:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:58 Get A/D filter: -9.255963e+061 result=40 16:14:58 Get A/D value=-858993460 result=40 16:14:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:14:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:14:58 Aux= 16:14:58 Message to Camera, serial 280032 queued 16:15:27 Received message from Master: op=Identify serial=280034 16:15:34 Received message from Master: op=PointingHead serial=280048 16:15:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:15:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:15:35 Point started: ret=0 16:15:35 point_skyscan result=0 16:15:36 Check angles 16:15:36 SkyScan query 16:15:36 SkyScan query done: ret=0 az=153.27<-10218 ze=9<-11400 Statuses=0009 0009 16:15:36 Msec=0 True Az=153.27 Ze=9 Az status=0009 Ze status=0009 16:15:36 Check angles 16:15:36 SkyScan query 16:15:37 SkyScan query done: ret=0 az=135.81<-9054 ze=-12<-12800 Statuses=0009 0009 16:15:37 Msec=750 True Az=135.81 Ze=-12 Az status=0009 Ze status=0009 16:15:37 Check angles 16:15:37 SkyScan query 16:15:38 SkyScan query done: ret=0 az=118.275<-7885 ze=-32.88<-14192 Statuses=0009 0009 16:15:38 Msec=1500 True Az=118.275 Ze=-32.88 Az status=0009 Ze status=0009 16:15:38 Check angles 16:15:38 SkyScan query 16:15:38 SkyScan query done: ret=0 az=100.92<-6728 ze=-51.51<-15434 Statuses=0009 0009 16:15:38 Msec=2250 True Az=100.92 Ze=-51.51 Az status=0009 Ze status=0009 16:15:39 Check angles 16:15:39 SkyScan query 16:15:39 SkyScan query done: ret=0 az=85.965<-5731 ze=-51.525<-15435 Statuses=0009 0008 16:15:39 Msec=3000 True Az=85.965 Ze=-51.525 Az status=0009 Ze status=0008 16:15:39 Check angles 16:15:39 SkyScan query 16:15:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:15:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:15:40 Message to Master queued w/err=0: serial=280048 error=0 16:15:45 Received message from Master: op=Filter serial=280049 16:15:45 Color wheel filter change from 0 to 0 16:15:45 FLIGetFilterPos err=0 currentPosition=0 16:15:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:15:45 Filter is already there-color wheel unchanged 16:15:45 Received message from Master: op=Shutter serial=280050 16:15:45 Shutter LASER close 16:15:45 Received message from Camera: op=State serial=280052 16:15:45 GetSingleValue result=40 Value=cccccccc 16:15:45 SkyScan query 16:15:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:15:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:46 Parameters OK 16:15:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:46 Set A/D data flow result=40 16:15:46 Set A/D channel type result=40 16:15:46 Set A/D encoding result=40 16:15:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:46 Set channel filter=0.000000e+000 result=40 16:15:46 Config A/D Result=40 16:15:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:46 Get A/D filter: -9.255963e+061 result=40 16:15:46 Get A/D value=-858993460 result=40 16:15:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:46 Parameters OK 16:15:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:46 Set A/D data flow result=40 16:15:46 Set A/D channel type result=40 16:15:46 Set A/D encoding result=40 16:15:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:46 Set channel filter=0.000000e+000 result=40 16:15:46 Config A/D Result=40 16:15:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:46 Get A/D filter: -9.255963e+061 result=40 16:15:46 Get A/D value=-858993460 result=40 16:15:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:15:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:15:46 Aux= 16:15:46 Message to Camera, serial 280052 queued [UTC 2018-12-19 16:15:52] 16:16:23 Received message from Master: op=PointingHead serial=280065 16:16:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:16:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:16:23 Point started: ret=0 16:16:23 point_skyscan result=0 16:16:24 Check angles 16:16:24 SkyScan query 16:16:24 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.255<-17417 Statuses=0009 0009 16:16:24 Msec=0 True Az=108.9 Ze=-81.255 Az status=0009 Ze status=0009 16:16:24 Check angles 16:16:24 SkyScan query 16:16:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 16:16:25 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 16:16:25 Check angles 16:16:25 SkyScan query 16:16:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.57<-20238 Statuses=0008 0009 16:16:26 Msec=1500 True Az=112.995 Ze=-123.57 Az status=0008 Ze status=0009 16:16:26 Check angles 16:16:26 SkyScan query 16:16:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 16:16:26 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 16:16:27 Check angles 16:16:27 SkyScan query 16:16:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.9<-23060 Statuses=0008 0009 16:16:27 Msec=3000 True Az=112.995 Ze=-165.9 Az status=0008 Ze status=0009 16:16:27 Check angles 16:16:27 SkyScan query 16:16:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:16:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:16:28 Message to Master queued w/err=0: serial=280065 error=0 16:16:33 Received message from Master: op=Filter serial=280066 16:16:33 Color wheel filter change from 0 to 0 16:16:33 FLIGetFilterPos err=0 currentPosition=0 16:16:33 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:33 Filter is already there-color wheel unchanged 16:16:33 Received message from Master: op=Shutter serial=280067 16:16:33 Shutter LASER open 16:16:33 Received message from Camera: op=State serial=280069 16:16:33 GetSingleValue result=40 Value=cccccccc 16:16:33 SkyScan query 16:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:16:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:34 Parameters OK 16:16:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:34 Set A/D data flow result=40 16:16:34 Set A/D channel type result=40 16:16:34 Set A/D encoding result=40 16:16:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:34 Set channel filter=0.000000e+000 result=40 16:16:34 Config A/D Result=40 16:16:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:34 Get A/D filter: -9.255963e+061 result=40 16:16:34 Get A/D value=-858993460 result=40 16:16:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:34 Parameters OK 16:16:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:34 Set A/D data flow result=40 16:16:34 Set A/D channel type result=40 16:16:34 Set A/D encoding result=40 16:16:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:34 Set channel filter=0.000000e+000 result=40 16:16:34 Config A/D Result=40 16:16:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:34 Get A/D filter: -9.255963e+061 result=40 16:16:34 Get A/D value=-858993460 result=40 16:16:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:34 Aux= 16:16:34 Message to Camera, serial 280069 queued 16:16:42 Received message from Master: op=Shutter serial=280079 16:16:42 Shutter LASER close 16:16:43 Received message from Master: op=PointingHead serial=280083 16:16:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:16:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:16:43 Point started: ret=0 16:16:43 point_skyscan result=0 16:16:44 Check angles 16:16:44 SkyScan query 16:16:44 SkyScan query done: ret=0 az=89.775<-5985 ze=157.275<-1515 Statuses=0009 0009 16:16:44 Msec=0 True Az=89.775 Ze=157.275 Az status=0009 Ze status=0009 16:16:45 Check angles 16:16:45 SkyScan query 16:16:45 SkyScan query done: ret=0 az=72<-4800 ze=135.93<-2938 Statuses=0009 0009 16:16:45 Msec=750 True Az=72 Ze=135.93 Az status=0009 Ze status=0009 16:16:45 Check angles 16:16:45 SkyScan query 16:16:46 SkyScan query done: ret=0 az=54.255<-3617 ze=114.465<-4369 Statuses=0009 0009 16:16:46 Msec=1500 True Az=54.255 Ze=114.465 Az status=0009 Ze status=0009 16:16:46 Check angles 16:16:46 SkyScan query 16:16:47 SkyScan query done: ret=0 az=40.98<-2732 ze=93.09<-5794 Statuses=0009 0009 16:16:47 Msec=2250 True Az=40.98 Ze=93.09 Az status=0009 Ze status=0009 16:16:47 Check angles 16:16:47 SkyScan query 16:16:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.165<-7189 Statuses=0008 0009 16:16:47 Msec=3000 True Az=40.995 Ze=72.165 Az status=0008 Ze status=0009 16:16:48 Check angles 16:16:48 SkyScan query 16:16:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.975<-8535 Statuses=0008 0009 16:16:48 Msec=3750 True Az=40.995 Ze=51.975 Az status=0008 Ze status=0009 16:16:48 Check angles 16:16:48 SkyScan query 16:16:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:16:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:16:49 Message to Master queued w/err=0: serial=280083 error=0 16:16:54 Received message from Master: op=Filter serial=280084 16:16:54 Color wheel filter change from 0 to 0 16:16:54 FLIGetFilterPos err=0 currentPosition=0 16:16:54 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:54 Filter is already there-color wheel unchanged 16:16:54 Received message from Master: op=Shutter serial=280085 16:16:54 Shutter LASER close 16:16:54 Received message from Camera: op=State serial=280087 16:16:54 GetSingleValue result=40 Value=cccccccc 16:16:54 SkyScan query 16:16:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:16:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:55 Parameters OK 16:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:55 Set A/D data flow result=40 16:16:55 Set A/D channel type result=40 16:16:55 Set A/D encoding result=40 16:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:55 Set channel filter=0.000000e+000 result=40 16:16:55 Config A/D Result=40 16:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:55 Get A/D filter: -9.255963e+061 result=40 16:16:55 Get A/D value=-858993460 result=40 16:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:55 Parameters OK 16:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:55 Set A/D data flow result=40 16:16:55 Set A/D channel type result=40 16:16:55 Set A/D encoding result=40 16:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:55 Set channel filter=0.000000e+000 result=40 16:16:55 Config A/D Result=40 16:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:55 Get A/D filter: -9.255963e+061 result=40 16:16:55 Get A/D value=-858993460 result=40 16:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:55 Aux= 16:16:55 Message to Camera, serial 280087 queued 16:17:32 Received message from Master: op=PointingHead serial=280100 16:17:32 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:17:32 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:17:32 Point started: ret=0 16:17:32 point_skyscan result=0 16:17:33 Check angles 16:17:33 SkyScan query 16:17:33 SkyScan query done: ret=0 az=64.335<-4289 ze=66.555<-7563 Statuses=0009 0008 16:17:33 Msec=0 True Az=64.335 Ze=66.555 Az status=0009 Ze status=0008 16:17:34 Check angles 16:17:34 SkyScan query 16:17:34 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 16:17:34 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 16:17:34 Check angles 16:17:34 SkyScan query 16:17:35 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 16:17:35 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 16:17:35 Check angles 16:17:35 SkyScan query 16:17:36 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 16:17:36 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 16:17:36 Check angles 16:17:36 SkyScan query 16:17:36 SkyScan query done: ret=0 az=134.37<-8958 ze=66.495<-7567 Statuses=0009 0008 16:17:36 Msec=3000 True Az=134.37 Ze=66.495 Az status=0009 Ze status=0008 16:17:37 Check angles 16:17:37 SkyScan query 16:17:37 SkyScan query done: ret=0 az=152.16<-10144 ze=66.495<-7567 Statuses=0009 0008 16:17:37 Msec=3750 True Az=152.16 Ze=66.495 Az status=0009 Ze status=0008 16:17:37 Check angles 16:17:37 SkyScan query 16:17:38 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:17:38 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:17:38 Message to Master queued w/err=0: serial=280100 error=0 16:17:43 Received message from Master: op=Filter serial=280101 16:17:43 Color wheel filter change from 0 to 0 16:17:43 FLIGetFilterPos err=0 currentPosition=0 16:17:43 FLIGetStepsRemaining err=0 RemainingSteps=0 16:17:43 Filter is already there-color wheel unchanged 16:17:43 Received message from Master: op=Shutter serial=280102 16:17:43 Shutter LASER close 16:17:43 Received message from Camera: op=State serial=280104 16:17:43 GetSingleValue result=40 Value=cccccccc 16:17:43 SkyScan query 16:17:44 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:17:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:44 Parameters OK 16:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:44 Set A/D data flow result=40 16:17:44 Set A/D channel type result=40 16:17:44 Set A/D encoding result=40 16:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:44 Set channel filter=0.000000e+000 result=40 16:17:44 Config A/D Result=40 16:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:44 Get A/D filter: -9.255963e+061 result=40 16:17:44 Get A/D value=-858993460 result=40 16:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:44 Parameters OK 16:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:44 Set A/D data flow result=40 16:17:44 Set A/D channel type result=40 16:17:44 Set A/D encoding result=40 16:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:44 Set channel filter=0.000000e+000 result=40 16:17:44 Config A/D Result=40 16:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:44 Get A/D filter: -9.255963e+061 result=40 16:17:44 Get A/D value=-858993460 result=40 16:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:44 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:17:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:17:44 Aux= 16:17:44 Message to Camera, serial 280104 queued 16:18:21 Received message from Master: op=PointingHead serial=280117 16:18:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:18:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:18:21 Point started: ret=0 16:18:21 point_skyscan result=0 16:18:22 Check angles 16:18:22 SkyScan query 16:18:22 SkyScan query done: ret=0 az=135.03<-9002 ze=36.825<-9545 Statuses=0009 0009 16:18:22 Msec=0 True Az=135.03 Ze=36.825 Az status=0009 Ze status=0009 16:18:22 Check angles 16:18:22 SkyScan query 16:18:23 SkyScan query done: ret=0 az=117.555<-7837 ze=15.87<-10942 Statuses=0009 0009 16:18:23 Msec=750 True Az=117.555 Ze=15.87 Az status=0009 Ze status=0009 16:18:23 Check angles 16:18:23 SkyScan query 16:18:24 SkyScan query done: ret=0 az=100.185<-6679 ze=-5.07<-12338 Statuses=0009 0009 16:18:24 Msec=1500 True Az=100.185 Ze=-5.07 Az status=0009 Ze status=0009 16:18:24 Check angles 16:18:24 SkyScan query 16:18:25 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.025<-13735 Statuses=0009 0009 16:18:25 Msec=2250 True Az=82.65 Ze=-26.025 Az status=0009 Ze status=0009 16:18:25 Check angles 16:18:25 SkyScan query 16:18:25 SkyScan query done: ret=0 az=65.19<-4346 ze=-38.58<-14572 Statuses=0009 0008 16:18:25 Msec=3000 True Az=65.19 Ze=-38.58 Az status=0009 Ze status=0008 16:18:25 Check angles 16:18:25 SkyScan query 16:18:26 SkyScan query done: ret=0 az=47.73<-3182 ze=-38.52<-14568 Statuses=0009 0008 16:18:26 Msec=3750 True Az=47.73 Ze=-38.52 Az status=0009 Ze status=0008 16:18:26 Check angles 16:18:26 SkyScan query 16:18:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:18:27 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:18:27 Message to Master queued w/err=0: serial=280117 error=0 16:18:32 Received message from Master: op=Filter serial=280118 16:18:32 Color wheel filter change from 0 to 0 16:18:32 FLIGetFilterPos err=0 currentPosition=0 16:18:32 FLIGetStepsRemaining err=0 RemainingSteps=0 16:18:32 Filter is already there-color wheel unchanged 16:18:32 Received message from Master: op=Shutter serial=280119 16:18:32 Shutter LASER close 16:18:32 Received message from Camera: op=State serial=280121 16:18:32 GetSingleValue result=40 Value=cccccccc 16:18:32 SkyScan query 16:18:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:18:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:33 Parameters OK 16:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:33 Set A/D data flow result=40 16:18:33 Set A/D channel type result=40 16:18:33 Set A/D encoding result=40 16:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:33 Set channel filter=0.000000e+000 result=40 16:18:33 Config A/D Result=40 16:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:33 Get A/D filter: -9.255963e+061 result=40 16:18:33 Get A/D value=-858993460 result=40 16:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:33 Parameters OK 16:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:33 Set A/D data flow result=40 16:18:33 Set A/D channel type result=40 16:18:33 Set A/D encoding result=40 16:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:33 Set channel filter=0.000000e+000 result=40 16:18:33 Config A/D Result=40 16:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:33 Get A/D filter: -9.255963e+061 result=40 16:18:33 Get A/D value=-858993460 result=40 16:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:18:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:18:33 Aux= 16:18:33 Message to Camera, serial 280121 queued 16:19:09 Received message from Master: op=PointingHead serial=280134 16:19:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:19:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:19:10 Point started: ret=0 16:19:10 point_skyscan result=0 16:19:10 Check angles 16:19:10 SkyScan query 16:19:11 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.025<-16535 Statuses=0009 0009 16:19:11 Msec=0 True Az=63.81 Ze=-68.025 Az status=0009 Ze status=0009 16:19:11 Check angles 16:19:11 SkyScan query 16:19:12 SkyScan query done: ret=0 az=81.075<-5405 ze=-88.995<-17933 Statuses=0009 0009 16:19:12 Msec=750 True Az=81.075 Ze=-88.995 Az status=0009 Ze status=0009 16:19:12 Check angles 16:19:12 SkyScan query 16:19:13 SkyScan query done: ret=0 az=98.64<-6576 ze=-109.89<-19326 Statuses=0009 0009 16:19:13 Msec=1500 True Az=98.64 Ze=-109.89 Az status=0009 Ze status=0009 16:19:13 Check angles 16:19:13 SkyScan query 16:19:13 SkyScan query done: ret=0 az=116.025<-7735 ze=-130.905<-20727 Statuses=0009 0009 16:19:13 Msec=2250 True Az=116.025 Ze=-130.905 Az status=0009 Ze status=0009 16:19:13 Check angles 16:19:13 SkyScan query 16:19:14 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 16:19:14 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 16:19:14 Check angles 16:19:14 SkyScan query 16:19:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 16:19:15 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 16:19:15 Message to Master queued w/err=0: serial=280134 error=0 16:19:20 Received message from Master: op=Filter serial=280135 16:19:20 Color wheel filter change from 0 to 0 16:19:20 FLIGetFilterPos err=0 currentPosition=0 16:19:20 FLIGetStepsRemaining err=0 RemainingSteps=0 16:19:20 Filter is already there-color wheel unchanged 16:19:20 Received message from Master: op=Shutter serial=280136 16:19:20 Shutter LASER close 16:19:20 Received message from Camera: op=State serial=280138 16:19:20 GetSingleValue result=40 Value=cccccccc 16:19:20 SkyScan query 16:19:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:19:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:21 Parameters OK 16:19:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:21 Set A/D data flow result=40 16:19:21 Set A/D channel type result=40 16:19:21 Set A/D encoding result=40 16:19:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:21 Set channel filter=0.000000e+000 result=40 16:19:21 Config A/D Result=40 16:19:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:21 Get A/D filter: -9.255963e+061 result=40 16:19:21 Get A/D value=-858993460 result=40 16:19:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:21 Parameters OK 16:19:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:21 Set A/D data flow result=40 16:19:21 Set A/D channel type result=40 16:19:21 Set A/D encoding result=40 16:19:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:21 Set channel filter=0.000000e+000 result=40 16:19:21 Config A/D Result=40 16:19:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:21 Get A/D filter: -9.255963e+061 result=40 16:19:21 Get A/D value=-858993460 result=40 16:19:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:19:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:19:21 Aux= 16:19:21 Message to Camera, serial 280138 queued 16:19:57 Received message from Master: op=PointingHead serial=280150 16:19:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:19:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:19:57 Point started: ret=0 16:19:57 point_skyscan result=0 16:19:58 Check angles 16:19:58 SkyScan query 16:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.88<-23392 Statuses=0009 0009 16:19:58 Msec=0 True Az=112.995 Ze=-170.88 Az status=0009 Ze status=0009 16:19:58 Check angles 16:19:58 SkyScan query 16:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:19:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:19:59 Message to Master queued w/err=0: serial=280150 error=0 16:20:04 Received message from Master: op=Filter serial=280151 16:20:04 Color wheel filter change from 0 to 0 16:20:04 FLIGetFilterPos err=0 currentPosition=0 16:20:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:20:04 Filter is already there-color wheel unchanged 16:20:04 Received message from Master: op=Shutter serial=280152 16:20:04 Shutter LASER open 16:20:04 Received message from Camera: op=State serial=280154 16:20:04 GetSingleValue result=40 Value=cccccccc 16:20:04 SkyScan query 16:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:20:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:05 Parameters OK 16:20:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:05 Set A/D data flow result=40 16:20:05 Set A/D channel type result=40 16:20:05 Set A/D encoding result=40 16:20:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:05 Set channel filter=0.000000e+000 result=40 16:20:05 Config A/D Result=40 16:20:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:05 Get A/D filter: -9.255963e+061 result=40 16:20:05 Get A/D value=-858993460 result=40 16:20:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:05 Parameters OK 16:20:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:05 Set A/D data flow result=40 16:20:05 Set A/D channel type result=40 16:20:05 Set A/D encoding result=40 16:20:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:05 Set channel filter=0.000000e+000 result=40 16:20:05 Config A/D Result=40 16:20:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:05 Get A/D filter: -9.255963e+061 result=40 16:20:05 Get A/D value=-858993460 result=40 16:20:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:20:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:20:05 Aux= 16:20:05 Message to Camera, serial 280154 queued 16:20:13 Received message from Master: op=Shutter serial=280164 16:20:13 Shutter LASER close 16:20:14 Received message from Master: op=PointingHead serial=280168 16:20:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:20:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:20:14 Point started: ret=0 16:20:14 point_skyscan result=0 16:20:15 Check angles 16:20:15 SkyScan query 16:20:16 SkyScan query done: ret=0 az=136.2<-9080 ze=-142.98<-21532 Statuses=0009 0009 16:20:16 Msec=0 True Az=136.2 Ze=-142.98 Az status=0009 Ze status=0009 16:20:16 Check angles 16:20:16 SkyScan query 16:20:16 SkyScan query done: ret=0 az=153.69<-10246 ze=-122.04<-20136 Statuses=0009 0009 16:20:16 Msec=750 True Az=153.69 Ze=-122.04 Az status=0009 Ze status=0009 16:20:16 Check angles 16:20:16 SkyScan query 16:20:17 SkyScan query done: ret=0 az=171.51<-11434 ze=-100.545<-18703 Statuses=0009 0009 16:20:17 Msec=1500 True Az=171.51 Ze=-100.545 Az status=0009 Ze status=0009 16:20:17 Check angles 16:20:17 SkyScan query 16:20:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.17<-17278 Statuses=0008 0009 16:20:18 Msec=2250 True Az=176.01 Ze=-79.17 Az status=0008 Ze status=0009 16:20:18 Check angles 16:20:18 SkyScan query 16:20:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.855<-15857 Statuses=0008 0009 16:20:19 Msec=3000 True Az=176.01 Ze=-57.855 Az status=0008 Ze status=0009 16:20:19 Check angles 16:20:19 SkyScan query 16:20:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 16:20:19 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 16:20:19 Message to Master queued w/err=0: serial=280168 error=0 16:20:24 Received message from Master: op=Filter serial=280169 16:20:24 Color wheel filter change from 0 to 0 16:20:24 FLIGetFilterPos err=0 currentPosition=0 16:20:24 FLIGetStepsRemaining err=0 RemainingSteps=0 16:20:24 Filter is already there-color wheel unchanged 16:20:25 Received message from Master: op=Shutter serial=280170 16:20:25 Shutter LASER close 16:20:25 Received message from Camera: op=State serial=280172 16:20:25 GetSingleValue result=40 Value=cccccccc 16:20:25 SkyScan query 16:20:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:20:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:25 Parameters OK 16:20:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:25 Set A/D data flow result=40 16:20:25 Set A/D channel type result=40 16:20:25 Set A/D encoding result=40 16:20:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:25 Set channel filter=0.000000e+000 result=40 16:20:25 Config A/D Result=40 16:20:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:25 Get A/D filter: -9.255963e+061 result=40 16:20:25 Get A/D value=-858993460 result=40 16:20:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:25 Parameters OK 16:20:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:25 Set A/D data flow result=40 16:20:25 Set A/D channel type result=40 16:20:25 Set A/D encoding result=40 16:20:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:25 Set channel filter=0.000000e+000 result=40 16:20:25 Config A/D Result=40 16:20:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:25 Get A/D filter: -9.255963e+061 result=40 16:20:25 Get A/D value=-858993460 result=40 16:20:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:20:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:20:25 Aux= 16:20:25 Message to Camera, serial 280172 queued 16:21:02 Received message from Master: op=PointingHead serial=280185 16:21:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:21:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:21:02 Point started: ret=0 16:21:02 point_skyscan result=0 16:21:03 Check angles 16:21:03 SkyScan query 16:21:04 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.75<-13450 Statuses=0009 0009 16:21:04 Msec=0 True Az=152.985 Ze=-21.75 Az status=0009 Ze status=0009 16:21:04 Check angles 16:21:04 SkyScan query 16:21:05 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.735<-12049 Statuses=0009 0009 16:21:05 Msec=750 True Az=135.45 Ze=-0.735 Az status=0009 Ze status=0009 16:21:05 Check angles 16:21:05 SkyScan query 16:21:05 SkyScan query done: ret=0 az=118.035<-7869 ze=20.19<-10654 Statuses=0009 0009 16:21:05 Msec=1500 True Az=118.035 Ze=20.19 Az status=0009 Ze status=0009 16:21:05 Check angles 16:21:05 SkyScan query 16:21:06 SkyScan query done: ret=0 az=100.23<-6682 ze=41.625<-9225 Statuses=0009 0009 16:21:06 Msec=2250 True Az=100.23 Ze=41.625 Az status=0009 Ze status=0009 16:21:06 Check angles 16:21:06 SkyScan query 16:21:07 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:21:07 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:21:07 Check angles 16:21:07 SkyScan query 16:21:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:21:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:21:08 Message to Master queued w/err=0: serial=280185 error=0 16:21:13 Received message from Master: op=Filter serial=280186 16:21:13 Color wheel filter change from 0 to 0 16:21:13 FLIGetFilterPos err=0 currentPosition=0 16:21:13 FLIGetStepsRemaining err=0 RemainingSteps=0 16:21:13 Filter is already there-color wheel unchanged 16:21:13 Received message from Master: op=Shutter serial=280187 16:21:13 Shutter LASER close 16:21:13 Received message from Camera: op=State serial=280189 16:21:13 GetSingleValue result=40 Value=cccccccc 16:21:13 SkyScan query 16:21:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:21:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:13 Parameters OK 16:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:13 Set A/D data flow result=40 16:21:13 Set A/D channel type result=40 16:21:13 Set A/D encoding result=40 16:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:13 Set channel filter=0.000000e+000 result=40 16:21:13 Config A/D Result=40 16:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:13 Get A/D filter: -9.255963e+061 result=40 16:21:13 Get A/D value=-858993460 result=40 16:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:13 Parameters OK 16:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:13 Set A/D data flow result=40 16:21:13 Set A/D channel type result=40 16:21:13 Set A/D encoding result=40 16:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:13 Set channel filter=0.000000e+000 result=40 16:21:13 Config A/D Result=40 16:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:13 Get A/D filter: -9.255963e+061 result=40 16:21:13 Get A/D value=-858993460 result=40 16:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:21:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:21:13 Aux= 16:21:13 Message to Camera, serial 280189 queued 16:21:50 Received message from Master: op=PointingHead serial=280202 16:21:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:21:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:21:51 Point started: ret=0 16:21:51 point_skyscan result=0 16:21:51 Check angles 16:21:51 SkyScan query 16:21:52 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 16:21:52 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 16:21:52 Check angles 16:21:52 SkyScan query 16:21:53 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 16:21:53 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 16:21:53 Check angles 16:21:53 SkyScan query 16:21:53 SkyScan query done: ret=0 az=143.985<-9599 ze=38.505<-9433 Statuses=0009 0008 16:21:53 Msec=1500 True Az=143.985 Ze=38.505 Az status=0009 Ze status=0008 16:21:54 Check angles 16:21:54 SkyScan query 16:21:54 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 16:21:54 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 16:21:54 Check angles 16:21:54 SkyScan query 16:21:55 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:21:55 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:21:55 Check angles 16:21:55 SkyScan query 16:21:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:21:56 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:21:56 Message to Master queued w/err=0: serial=280202 error=0 16:22:01 Received message from Master: op=Filter serial=280203 16:22:01 Color wheel filter change from 0 to 0 16:22:01 FLIGetFilterPos err=0 currentPosition=0 16:22:01 FLIGetStepsRemaining err=0 RemainingSteps=0 16:22:01 Filter is already there-color wheel unchanged 16:22:01 Received message from Master: op=Shutter serial=280204 16:22:01 Shutter LASER close 16:22:01 Received message from Camera: op=State serial=280206 16:22:01 GetSingleValue result=40 Value=cccccccc 16:22:01 SkyScan query 16:22:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:22:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:01 Parameters OK 16:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:01 Set A/D data flow result=40 16:22:01 Set A/D channel type result=40 16:22:01 Set A/D encoding result=40 16:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:01 Set channel filter=0.000000e+000 result=40 16:22:01 Config A/D Result=40 16:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:01 Get A/D filter: -9.255963e+061 result=40 16:22:01 Get A/D value=-858993460 result=40 16:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:01 Parameters OK 16:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:01 Set A/D data flow result=40 16:22:01 Set A/D channel type result=40 16:22:01 Set A/D encoding result=40 16:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:01 Set channel filter=0.000000e+000 result=40 16:22:01 Config A/D Result=40 16:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:01 Get A/D filter: -9.255963e+061 result=40 16:22:01 Get A/D value=-858993460 result=40 16:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:22:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:22:01 Aux= 16:22:01 Message to Camera, serial 280206 queued 16:22:38 Received message from Master: op=PointingHead serial=280219 16:22:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:22:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:22:39 Point started: ret=0 16:22:39 point_skyscan result=0 16:22:39 Check angles 16:22:39 SkyScan query 16:22:40 SkyScan query done: ret=0 az=152.565<-10171 ze=8.085<-11461 Statuses=0009 0009 16:22:40 Msec=0 True Az=152.565 Ze=8.085 Az status=0009 Ze status=0009 16:22:40 Check angles 16:22:40 SkyScan query 16:22:41 SkyScan query done: ret=0 az=134.595<-8973 ze=-13.245<-12883 Statuses=0009 0009 16:22:41 Msec=750 True Az=134.595 Ze=-13.245 Az status=0009 Ze status=0009 16:22:41 Check angles 16:22:41 SkyScan query 16:22:41 SkyScan query done: ret=0 az=117.15<-7810 ze=-34.245<-14283 Statuses=0009 0009 16:22:41 Msec=1500 True Az=117.15 Ze=-34.245 Az status=0009 Ze status=0009 16:22:42 Check angles 16:22:42 SkyScan query 16:22:42 SkyScan query done: ret=0 az=99.705<-6647 ze=-51.57<-15438 Statuses=0009 0009 16:22:42 Msec=2250 True Az=99.705 Ze=-51.57 Az status=0009 Ze status=0009 16:22:42 Check angles 16:22:42 SkyScan query 16:22:43 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:22:43 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:22:43 Check angles 16:22:43 SkyScan query 16:22:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:22:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:22:44 Message to Master queued w/err=0: serial=280219 error=0 16:22:49 Received message from Master: op=Filter serial=280220 16:22:49 Color wheel filter change from 0 to 0 16:22:49 FLIGetFilterPos err=0 currentPosition=0 16:22:49 FLIGetStepsRemaining err=0 RemainingSteps=0 16:22:49 Filter is already there-color wheel unchanged 16:22:49 Received message from Master: op=Shutter serial=280221 16:22:49 Shutter LASER close 16:22:49 Received message from Camera: op=State serial=280223 16:22:49 GetSingleValue result=40 Value=cccccccc 16:22:49 SkyScan query 16:22:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:22:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:50 Parameters OK 16:22:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:50 Set A/D data flow result=40 16:22:50 Set A/D channel type result=40 16:22:50 Set A/D encoding result=40 16:22:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:50 Set channel filter=0.000000e+000 result=40 16:22:50 Config A/D Result=40 16:22:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:50 Get A/D filter: -9.255963e+061 result=40 16:22:50 Get A/D value=-858993460 result=40 16:22:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:50 Parameters OK 16:22:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:50 Set A/D data flow result=40 16:22:50 Set A/D channel type result=40 16:22:50 Set A/D encoding result=40 16:22:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:50 Set channel filter=0.000000e+000 result=40 16:22:50 Config A/D Result=40 16:22:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:50 Get A/D filter: -9.255963e+061 result=40 16:22:50 Get A/D value=-858993460 result=40 16:22:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:22:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:22:50 Aux= 16:22:50 Message to Camera, serial 280223 queued 16:23:26 Received message from Master: op=PointingHead serial=280236 16:23:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:23:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:23:27 Point started: ret=0 16:23:27 point_skyscan result=0 16:23:27 Check angles 16:23:27 SkyScan query 16:23:28 SkyScan query done: ret=0 az=109.26<-7284 ze=-81.555<-17437 Statuses=0009 0009 16:23:28 Msec=0 True Az=109.26 Ze=-81.555 Az status=0009 Ze status=0009 16:23:28 Check angles 16:23:28 SkyScan query 16:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 16:23:29 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 16:23:29 Check angles 16:23:29 SkyScan query 16:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 16:23:30 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 16:23:30 Check angles 16:23:30 SkyScan query 16:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 16:23:30 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 16:23:30 Check angles 16:23:30 SkyScan query 16:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.795<-23053 Statuses=0008 0009 16:23:31 Msec=3000 True Az=112.995 Ze=-165.795 Az status=0008 Ze status=0009 16:23:31 Check angles 16:23:31 SkyScan query 16:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:23:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:23:32 Message to Master queued w/err=0: serial=280236 error=0 16:23:37 Received message from Master: op=Filter serial=280237 16:23:37 Color wheel filter change from 0 to 0 16:23:37 FLIGetFilterPos err=0 currentPosition=0 16:23:37 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:37 Filter is already there-color wheel unchanged 16:23:37 Received message from Master: op=Shutter serial=280238 16:23:37 Shutter LASER open 16:23:37 Received message from Camera: op=State serial=280240 16:23:37 GetSingleValue result=40 Value=cccccccc 16:23:37 SkyScan query 16:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:23:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:38 Parameters OK 16:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:38 Set A/D data flow result=40 16:23:38 Set A/D channel type result=40 16:23:38 Set A/D encoding result=40 16:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:38 Set channel filter=0.000000e+000 result=40 16:23:38 Config A/D Result=40 16:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:38 Get A/D filter: -9.255963e+061 result=40 16:23:38 Get A/D value=-858993460 result=40 16:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:38 Parameters OK 16:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:38 Set A/D data flow result=40 16:23:38 Set A/D channel type result=40 16:23:38 Set A/D encoding result=40 16:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:38 Set channel filter=0.000000e+000 result=40 16:23:38 Config A/D Result=40 16:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:38 Get A/D filter: -9.255963e+061 result=40 16:23:38 Get A/D value=-858993460 result=40 16:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:38 Aux= 16:23:38 Message to Camera, serial 280240 queued 16:23:46 Received message from Master: op=Shutter serial=280250 16:23:46 Shutter LASER close 16:23:47 Received message from Master: op=PointingHead serial=280254 16:23:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:23:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:23:47 Point started: ret=0 16:23:47 point_skyscan result=0 16:23:48 Check angles 16:23:48 SkyScan query 16:23:48 SkyScan query done: ret=0 az=89.535<-5969 ze=156.825<-1545 Statuses=0009 0009 16:23:48 Msec=0 True Az=89.535 Ze=156.825 Az status=0009 Ze status=0009 16:23:49 Check angles 16:23:49 SkyScan query 16:23:49 SkyScan query done: ret=0 az=71.985<-4799 ze=135.885<-2941 Statuses=0009 0009 16:23:49 Msec=750 True Az=71.985 Ze=135.885 Az status=0009 Ze status=0009 16:23:49 Check angles 16:23:49 SkyScan query 16:23:50 SkyScan query done: ret=0 az=54.6<-3640 ze=114.9<-4340 Statuses=0009 0009 16:23:50 Msec=1500 True Az=54.6 Ze=114.9 Az status=0009 Ze status=0009 16:23:50 Check angles 16:23:50 SkyScan query 16:23:51 SkyScan query done: ret=0 az=40.98<-2732 ze=93.975<-5735 Statuses=0009 0009 16:23:51 Msec=2250 True Az=40.98 Ze=93.975 Az status=0009 Ze status=0009 16:23:51 Check angles 16:23:51 SkyScan query 16:23:51 SkyScan query done: ret=0 az=40.995<-2733 ze=72.99<-7134 Statuses=0008 0009 16:23:51 Msec=3000 True Az=40.995 Ze=72.99 Az status=0008 Ze status=0009 16:23:52 Check angles 16:23:52 SkyScan query 16:23:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 16:23:52 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 16:23:52 Check angles 16:23:52 SkyScan query 16:23:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:23:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:23:53 Message to Master queued w/err=0: serial=280254 error=0 16:23:58 Received message from Master: op=Filter serial=280255 16:23:58 Color wheel filter change from 0 to 0 16:23:58 FLIGetFilterPos err=0 currentPosition=0 16:23:58 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:58 Filter is already there-color wheel unchanged 16:23:58 Received message from Master: op=Shutter serial=280256 16:23:58 Shutter LASER close 16:23:58 Received message from Camera: op=State serial=280258 16:23:58 GetSingleValue result=40 Value=cccccccc 16:23:58 SkyScan query 16:23:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:23:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:59 Parameters OK 16:23:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:59 Set A/D data flow result=40 16:23:59 Set A/D channel type result=40 16:23:59 Set A/D encoding result=40 16:23:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:59 Set channel filter=0.000000e+000 result=40 16:23:59 Config A/D Result=40 16:23:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:59 Get A/D filter: -9.255963e+061 result=40 16:23:59 Get A/D value=-858993460 result=40 16:23:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:59 Parameters OK 16:23:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:59 Set A/D data flow result=40 16:23:59 Set A/D channel type result=40 16:23:59 Set A/D encoding result=40 16:23:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:59 Set channel filter=0.000000e+000 result=40 16:23:59 Config A/D Result=40 16:23:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:59 Get A/D filter: -9.255963e+061 result=40 16:23:59 Get A/D value=-858993460 result=40 16:23:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:59 Aux= 16:23:59 Message to Camera, serial 280258 queued 16:24:36 Received message from Master: op=PointingHead serial=280271 16:24:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:24:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:24:36 Point started: ret=0 16:24:36 point_skyscan result=0 16:24:37 Check angles 16:24:37 SkyScan query 16:24:37 SkyScan query done: ret=0 az=64.065<-4271 ze=66.54<-7564 Statuses=0009 0008 16:24:37 Msec=0 True Az=64.065 Ze=66.54 Az status=0009 Ze status=0008 16:24:37 Check angles 16:24:37 SkyScan query 16:24:38 SkyScan query done: ret=0 az=81.93<-5462 ze=66.51<-7566 Statuses=0009 0008 16:24:38 Msec=750 True Az=81.93 Ze=66.51 Az status=0009 Ze status=0008 16:24:38 Check angles 16:24:38 SkyScan query 16:24:39 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 16:24:39 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 16:24:39 Check angles 16:24:39 SkyScan query 16:24:40 SkyScan query done: ret=0 az=116.94<-7796 ze=66.495<-7567 Statuses=0009 0008 16:24:40 Msec=2250 True Az=116.94 Ze=66.495 Az status=0009 Ze status=0008 16:24:40 Check angles 16:24:40 SkyScan query 16:24:40 SkyScan query done: ret=0 az=134.265<-8951 ze=66.495<-7567 Statuses=0009 0008 16:24:40 Msec=3000 True Az=134.265 Ze=66.495 Az status=0009 Ze status=0008 16:24:40 Check angles 16:24:40 SkyScan query 16:24:41 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 16:24:41 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 16:24:41 Check angles 16:24:41 SkyScan query 16:24:42 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:24:42 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:24:42 Message to Master queued w/err=0: serial=280271 error=0 16:24:47 Received message from Master: op=Filter serial=280272 16:24:47 Color wheel filter change from 0 to 0 16:24:47 FLIGetFilterPos err=0 currentPosition=0 16:24:47 FLIGetStepsRemaining err=0 RemainingSteps=0 16:24:47 Filter is already there-color wheel unchanged 16:24:47 Received message from Master: op=Shutter serial=280273 16:24:47 Shutter LASER close 16:24:47 Received message from Camera: op=State serial=280275 16:24:47 GetSingleValue result=40 Value=cccccccc 16:24:47 SkyScan query 16:24:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:24:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:48 Parameters OK 16:24:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:48 Set A/D data flow result=40 16:24:48 Set A/D channel type result=40 16:24:48 Set A/D encoding result=40 16:24:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:48 Set channel filter=0.000000e+000 result=40 16:24:48 Config A/D Result=40 16:24:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:48 Get A/D filter: -9.255963e+061 result=40 16:24:48 Get A/D value=-858993460 result=40 16:24:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:48 Parameters OK 16:24:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:48 Set A/D data flow result=40 16:24:48 Set A/D channel type result=40 16:24:48 Set A/D encoding result=40 16:24:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:48 Set channel filter=0.000000e+000 result=40 16:24:48 Config A/D Result=40 16:24:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:48 Get A/D filter: -9.255963e+061 result=40 16:24:48 Get A/D value=-858993460 result=40 16:24:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:24:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:24:48 Aux= 16:24:48 Message to Camera, serial 280275 queued 16:25:23 Received message from Master: op=PointingHead serial=280287 16:25:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:25:23 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:25:24 Point started: ret=0 16:25:24 point_skyscan result=0 16:25:25 Check angles 16:25:25 SkyScan query 16:25:25 SkyScan query done: ret=0 az=134.805<-8987 ze=36.51<-9566 Statuses=0009 0009 16:25:25 Msec=0 True Az=134.805 Ze=36.51 Az status=0009 Ze status=0009 16:25:25 Check angles 16:25:25 SkyScan query 16:25:26 SkyScan query done: ret=0 az=117.345<-7823 ze=15.57<-10962 Statuses=0009 0009 16:25:26 Msec=750 True Az=117.345 Ze=15.57 Az status=0009 Ze status=0009 16:25:26 Check angles 16:25:26 SkyScan query 16:25:27 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.4<-12360 Statuses=0009 0009 16:25:27 Msec=1500 True Az=99.93 Ze=-5.4 Az status=0009 Ze status=0009 16:25:27 Check angles 16:25:27 SkyScan query 16:25:27 SkyScan query done: ret=0 az=82.11<-5474 ze=-26.88<-13792 Statuses=0009 0009 16:25:27 Msec=2250 True Az=82.11 Ze=-26.88 Az status=0009 Ze status=0009 16:25:28 Check angles 16:25:28 SkyScan query 16:25:28 SkyScan query done: ret=0 az=64.605<-4307 ze=-38.58<-14572 Statuses=0009 0008 16:25:28 Msec=3000 True Az=64.605 Ze=-38.58 Az status=0009 Ze status=0008 16:25:28 Check angles 16:25:28 SkyScan query 16:25:29 SkyScan query done: ret=0 az=47.1<-3140 ze=-38.52<-14568 Statuses=0009 0008 16:25:29 Msec=3750 True Az=47.1 Ze=-38.52 Az status=0009 Ze status=0008 16:25:29 Check angles 16:25:29 SkyScan query 16:25:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:25:30 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:25:30 Message to Master queued w/err=0: serial=280287 error=0 16:25:35 Received message from Master: op=Filter serial=280288 16:25:35 Color wheel filter change from 0 to 0 16:25:35 FLIGetFilterPos err=0 currentPosition=0 16:25:35 FLIGetStepsRemaining err=0 RemainingSteps=0 16:25:35 Filter is already there-color wheel unchanged 16:25:35 Received message from Master: op=Shutter serial=280289 16:25:35 Shutter LASER close 16:25:35 Received message from Camera: op=State serial=280291 16:25:35 GetSingleValue result=40 Value=cccccccc 16:25:35 SkyScan query 16:25:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:25:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:36 Parameters OK 16:25:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:36 Set A/D data flow result=40 16:25:36 Set A/D channel type result=40 16:25:36 Set A/D encoding result=40 16:25:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:36 Set channel filter=0.000000e+000 result=40 16:25:36 Config A/D Result=40 16:25:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:36 Get A/D filter: -9.255963e+061 result=40 16:25:36 Get A/D value=-858993460 result=40 16:25:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:36 Parameters OK 16:25:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:36 Set A/D data flow result=40 16:25:36 Set A/D channel type result=40 16:25:36 Set A/D encoding result=40 16:25:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:36 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-19 16:25:36] 16:25:36 Config A/D Result=40 16:25:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:36 Get A/D filter: -9.255963e+061 result=40 16:25:36 Get A/D value=-858993460 result=40 16:25:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:25:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:25:36 Aux= 16:25:36 Message to Camera, serial 280291 queued 16:26:12 Received message from Master: op=PointingHead serial=280304 16:26:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:26:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:26:13 Point started: ret=0 16:26:13 point_skyscan result=0 16:26:13 Check angles 16:26:13 SkyScan query 16:26:14 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.01<-16534 Statuses=0009 0009 16:26:14 Msec=0 True Az=63.765 Ze=-68.01 Az status=0009 Ze status=0009 16:26:14 Check angles 16:26:14 SkyScan query 16:26:15 SkyScan query done: ret=0 az=81.105<-5407 ze=-88.965<-17931 Statuses=0009 0009 16:26:15 Msec=750 True Az=81.105 Ze=-88.965 Az status=0009 Ze status=0009 16:26:15 Check angles 16:26:15 SkyScan query 16:26:16 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.385<-19359 Statuses=0009 0009 16:26:16 Msec=1500 True Az=99.135 Ze=-110.385 Az status=0009 Ze status=0009 16:26:16 Check angles 16:26:16 SkyScan query 16:26:16 SkyScan query done: ret=0 az=116.505<-7767 ze=-131.31<-20754 Statuses=0009 0009 16:26:16 Msec=2250 True Az=116.505 Ze=-131.31 Az status=0009 Ze status=0009 16:26:16 Check angles 16:26:16 SkyScan query 16:26:17 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 16:26:17 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 16:26:17 Check angles 16:26:17 SkyScan query 16:26:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 16:26:18 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 16:26:18 Message to Master queued w/err=0: serial=280304 error=0 16:26:23 Received message from Master: op=Filter serial=280305 16:26:23 Color wheel filter change from 0 to 0 16:26:23 FLIGetFilterPos err=0 currentPosition=0 16:26:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:26:23 Filter is already there-color wheel unchanged 16:26:23 Received message from Master: op=Shutter serial=280306 16:26:23 Shutter LASER close 16:26:23 Received message from Camera: op=State serial=280308 16:26:23 GetSingleValue result=40 Value=cccccccc 16:26:23 SkyScan query 16:26:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:26:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:24 Parameters OK 16:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:24 Set A/D data flow result=40 16:26:24 Set A/D channel type result=40 16:26:24 Set A/D encoding result=40 16:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:24 Set channel filter=0.000000e+000 result=40 16:26:24 Config A/D Result=40 16:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:24 Get A/D filter: -9.255963e+061 result=40 16:26:24 Get A/D value=-858993460 result=40 16:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:24 Parameters OK 16:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:24 Set A/D data flow result=40 16:26:24 Set A/D channel type result=40 16:26:24 Set A/D encoding result=40 16:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:24 Set channel filter=0.000000e+000 result=40 16:26:24 Config A/D Result=40 16:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:24 Get A/D filter: -9.255963e+061 result=40 16:26:24 Get A/D value=-858993460 result=40 16:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:26:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:26:24 Aux= 16:26:24 Message to Camera, serial 280308 queued 16:27:00 Received message from Master: op=PointingHead serial=280321 16:27:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:27:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:27:01 Point started: ret=0 16:27:01 point_skyscan result=0 16:27:02 Check angles 16:27:02 SkyScan query 16:27:02 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 16:27:02 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 16:27:02 Check angles 16:27:02 SkyScan query 16:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:27:03 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:27:03 Message to Master queued w/err=0: serial=280321 error=0 16:27:08 Received message from Master: op=Filter serial=280322 16:27:08 Color wheel filter change from 0 to 0 16:27:08 FLIGetFilterPos err=0 currentPosition=0 16:27:08 FLIGetStepsRemaining err=0 RemainingSteps=0 16:27:08 Filter is already there-color wheel unchanged 16:27:08 Received message from Master: op=Shutter serial=280323 16:27:08 Shutter LASER open 16:27:08 Received message from Camera: op=State serial=280325 16:27:08 GetSingleValue result=40 Value=cccccccc 16:27:08 SkyScan query 16:27:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:27:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:09 Parameters OK 16:27:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:09 Set A/D data flow result=40 16:27:09 Set A/D channel type result=40 16:27:09 Set A/D encoding result=40 16:27:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:09 Set channel filter=0.000000e+000 result=40 16:27:09 Config A/D Result=40 16:27:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:09 Get A/D filter: -9.255963e+061 result=40 16:27:09 Get A/D value=-858993460 result=40 16:27:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:09 Parameters OK 16:27:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:09 Set A/D data flow result=40 16:27:09 Set A/D channel type result=40 16:27:09 Set A/D encoding result=40 16:27:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:09 Set channel filter=0.000000e+000 result=40 16:27:09 Config A/D Result=40 16:27:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:09 Get A/D filter: -9.255963e+061 result=40 16:27:09 Get A/D value=-858993460 result=40 16:27:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:27:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:27:09 Aux= 16:27:09 Message to Camera, serial 280325 queued 16:27:17 Received message from Master: op=Shutter serial=280335 16:27:17 Shutter LASER close 16:27:18 Received message from Master: op=PointingHead serial=280339 16:27:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:27:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:27:18 Point started: ret=0 16:27:18 point_skyscan result=0 16:27:19 Check angles 16:27:19 SkyScan query 16:27:19 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.475<-21565 Statuses=0009 0009 16:27:19 Msec=0 True Az=135.975 Ze=-143.475 Az status=0009 Ze status=0009 16:27:20 Check angles 16:27:20 SkyScan query 16:27:20 SkyScan query done: ret=0 az=153.33<-10222 ze=-122.505<-20167 Statuses=0009 0009 16:27:20 Msec=750 True Az=153.33 Ze=-122.505 Az status=0009 Ze status=0009 16:27:20 Check angles 16:27:20 SkyScan query 16:27:21 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.64<-18776 Statuses=0009 0009 16:27:21 Msec=1500 True Az=170.805 Ze=-101.64 Az status=0009 Ze status=0009 16:27:21 Check angles 16:27:21 SkyScan query 16:27:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.205<-17347 Statuses=0008 0009 16:27:22 Msec=2250 True Az=176.01 Ze=-80.205 Az status=0008 Ze status=0009 16:27:22 Check angles 16:27:22 SkyScan query 16:27:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.22<-15948 Statuses=0008 0009 16:27:22 Msec=3000 True Az=175.995 Ze=-59.22 Az status=0008 Ze status=0009 16:27:23 Check angles 16:27:23 SkyScan query 16:27:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:27:23 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:27:23 Message to Master queued w/err=0: serial=280339 error=0 16:27:28 Received message from Master: op=Filter serial=280340 16:27:28 Color wheel filter change from 0 to 0 16:27:28 FLIGetFilterPos err=0 currentPosition=0 16:27:28 FLIGetStepsRemaining err=0 RemainingSteps=0 16:27:28 Filter is already there-color wheel unchanged 16:27:28 Received message from Master: op=Shutter serial=280341 16:27:28 Shutter LASER close 16:27:29 Received message from Camera: op=State serial=280343 16:27:29 GetSingleValue result=40 Value=cccccccc 16:27:29 SkyScan query 16:27:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:27:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:29 Parameters OK 16:27:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:29 Set A/D data flow result=40 16:27:29 Set A/D channel type result=40 16:27:29 Set A/D encoding result=40 16:27:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:29 Set channel filter=0.000000e+000 result=40 16:27:29 Config A/D Result=40 16:27:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:29 Get A/D filter: -9.255963e+061 result=40 16:27:29 Get A/D value=-858993460 result=40 16:27:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:29 Parameters OK 16:27:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:29 Set A/D data flow result=40 16:27:29 Set A/D channel type result=40 16:27:29 Set A/D encoding result=40 16:27:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:29 Set channel filter=0.000000e+000 result=40 16:27:29 Config A/D Result=40 16:27:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:29 Get A/D filter: -9.255963e+061 result=40 16:27:29 Get A/D value=-858993460 result=40 16:27:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:27:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:27:29 Aux= 16:27:29 Message to Camera, serial 280343 queued 16:28:06 Received message from Master: op=PointingHead serial=280356 16:28:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:28:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:28:06 Point started: ret=0 16:28:06 point_skyscan result=0 16:28:07 Check angles 16:28:07 SkyScan query 16:28:08 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.285<-13419 Statuses=0009 0009 16:28:08 Msec=0 True Az=152.655 Ze=-21.285 Az status=0009 Ze status=0009 16:28:08 Check angles 16:28:08 SkyScan query 16:28:08 SkyScan query done: ret=0 az=134.76<-8984 ze=0.075<-11995 Statuses=0009 0009 16:28:08 Msec=750 True Az=134.76 Ze=0.075 Az status=0009 Ze status=0009 16:28:09 Check angles 16:28:09 SkyScan query 16:28:09 SkyScan query done: ret=0 az=117.33<-7822 ze=21.15<-10590 Statuses=0009 0009 16:28:09 Msec=1500 True Az=117.33 Ze=21.15 Az status=0009 Ze status=0009 16:28:09 Check angles 16:28:09 SkyScan query 16:28:10 SkyScan query done: ret=0 az=99.81<-6654 ze=41.97<-9202 Statuses=0009 0009 16:28:10 Msec=2250 True Az=99.81 Ze=41.97 Az status=0009 Ze status=0009 16:28:10 Check angles 16:28:10 SkyScan query 16:28:11 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 16:28:11 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 16:28:11 Check angles 16:28:11 SkyScan query 16:28:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:28:11 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 16:28:11 Message to Master queued w/err=0: serial=280356 error=0 16:28:16 Received message from Master: op=Filter serial=280357 16:28:16 Color wheel filter change from 0 to 0 16:28:16 FLIGetFilterPos err=0 currentPosition=0 16:28:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:28:16 Filter is already there-color wheel unchanged 16:28:17 Received message from Master: op=Shutter serial=280358 16:28:17 Shutter LASER close 16:28:17 Received message from Camera: op=State serial=280360 16:28:17 GetSingleValue result=40 Value=cccccccc 16:28:17 SkyScan query 16:28:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:28:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:17 Parameters OK 16:28:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:17 Set A/D data flow result=40 16:28:17 Set A/D channel type result=40 16:28:17 Set A/D encoding result=40 16:28:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:17 Set channel filter=0.000000e+000 result=40 16:28:17 Config A/D Result=40 16:28:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:17 Get A/D filter: -9.255963e+061 result=40 16:28:17 Get A/D value=-858993460 result=40 16:28:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:17 Parameters OK 16:28:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:17 Set A/D data flow result=40 16:28:17 Set A/D channel type result=40 16:28:17 Set A/D encoding result=40 16:28:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:17 Set channel filter=0.000000e+000 result=40 16:28:17 Config A/D Result=40 16:28:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:17 Get A/D filter: -9.255963e+061 result=40 16:28:17 Get A/D value=-858993460 result=40 16:28:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:28:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:28:17 Aux= 16:28:17 Message to Camera, serial 280360 queued 16:28:53 Received message from Master: op=PointingHead serial=280372 16:28:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:28:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:28:53 Point started: ret=0 16:28:53 point_skyscan result=0 16:28:54 Check angles 16:28:54 SkyScan query 16:28:55 SkyScan query done: ret=0 az=109.14<-7276 ze=38.475<-9435 Statuses=0009 0008 16:28:55 Msec=0 True Az=109.14 Ze=38.475 Az status=0009 Ze status=0008 16:28:55 Check angles 16:28:55 SkyScan query 16:28:56 SkyScan query done: ret=0 az=126.6<-8440 ze=38.49<-9434 Statuses=0009 0008 16:28:56 Msec=750 True Az=126.6 Ze=38.49 Az status=0009 Ze status=0008 16:28:56 Check angles 16:28:56 SkyScan query 16:28:56 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 16:28:56 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 16:28:57 Check angles 16:28:57 SkyScan query 16:28:57 SkyScan query done: ret=0 az=161.925<-10795 ze=38.505<-9433 Statuses=0009 0008 16:28:57 Msec=2250 True Az=161.925 Ze=38.505 Az status=0009 Ze status=0008 16:28:57 Check angles 16:28:57 SkyScan query 16:28:58 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:28:58 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:28:58 Check angles 16:28:58 SkyScan query 16:28:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:28:59 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:28:59 Message to Master queued w/err=0: serial=280372 error=0 16:29:04 Received message from Master: op=Filter serial=280373 16:29:04 Color wheel filter change from 0 to 0 16:29:04 FLIGetFilterPos err=0 currentPosition=0 16:29:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:29:04 Filter is already there-color wheel unchanged 16:29:04 Received message from Master: op=Shutter serial=280374 16:29:04 Shutter LASER close 16:29:04 Received message from Camera: op=State serial=280376 16:29:04 GetSingleValue result=40 Value=cccccccc 16:29:04 SkyScan query 16:29:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:29:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:04 Parameters OK 16:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:04 Set A/D data flow result=40 16:29:04 Set A/D channel type result=40 16:29:04 Set A/D encoding result=40 16:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:04 Set channel filter=0.000000e+000 result=40 16:29:04 Config A/D Result=40 16:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:04 Get A/D filter: -9.255963e+061 result=40 16:29:04 Get A/D value=-858993460 result=40 16:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:04 Parameters OK 16:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:04 Set A/D data flow result=40 16:29:04 Set A/D channel type result=40 16:29:04 Set A/D encoding result=40 16:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:04 Set channel filter=0.000000e+000 result=40 16:29:04 Config A/D Result=40 16:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:04 Get A/D filter: -9.255963e+061 result=40 16:29:04 Get A/D value=-858993460 result=40 16:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:29:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:29:04 Aux= 16:29:04 Message to Camera, serial 280376 queued 16:29:41 Received message from Master: op=PointingHead serial=280389 16:29:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:29:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:29:42 Point started: ret=0 16:29:42 point_skyscan result=0 16:29:42 Check angles 16:29:42 SkyScan query 16:29:43 SkyScan query done: ret=0 az=152.745<-10183 ze=8.415<-11439 Statuses=0009 0009 16:29:43 Msec=0 True Az=152.745 Ze=8.415 Az status=0009 Ze status=0009 16:29:43 Check angles 16:29:43 SkyScan query 16:29:44 SkyScan query done: ret=0 az=134.91<-8994 ze=-12.945<-12863 Statuses=0009 0009 16:29:44 Msec=750 True Az=134.91 Ze=-12.945 Az status=0009 Ze status=0009 16:29:44 Check angles 16:29:44 SkyScan query 16:29:44 SkyScan query done: ret=0 az=117.315<-7821 ze=-33.975<-14265 Statuses=0009 0009 16:29:44 Msec=1500 True Az=117.315 Ze=-33.975 Az status=0009 Ze status=0009 16:29:45 Check angles 16:29:45 SkyScan query 16:29:45 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.57<-15438 Statuses=0009 0009 16:29:45 Msec=2250 True Az=100.08 Ze=-51.57 Az status=0009 Ze status=0009 16:29:45 Check angles 16:29:45 SkyScan query 16:29:46 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 16:29:46 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 16:29:46 Check angles 16:29:46 SkyScan query 16:29:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:29:47 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:29:47 Message to Master queued w/err=0: serial=280389 error=0 16:29:52 Received message from Master: op=Filter serial=280390 16:29:52 Color wheel filter change from 0 to 0 16:29:52 FLIGetFilterPos err=0 currentPosition=0 16:29:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:29:52 Filter is already there-color wheel unchanged 16:29:52 Received message from Master: op=Shutter serial=280391 16:29:52 Shutter LASER close 16:29:52 Received message from Camera: op=State serial=280393 16:29:52 GetSingleValue result=40 Value=cccccccc 16:29:52 SkyScan query 16:29:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:29:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:52 Parameters OK 16:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:52 Set A/D data flow result=40 16:29:52 Set A/D channel type result=40 16:29:52 Set A/D encoding result=40 16:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:52 Set channel filter=0.000000e+000 result=40 16:29:52 Config A/D Result=40 16:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:52 Get A/D filter: -9.255963e+061 result=40 16:29:52 Get A/D value=-858993460 result=40 16:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:52 Parameters OK 16:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:52 Set A/D data flow result=40 16:29:52 Set A/D channel type result=40 16:29:52 Set A/D encoding result=40 16:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:52 Set channel filter=0.000000e+000 result=40 16:29:52 Config A/D Result=40 16:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:52 Get A/D filter: -9.255963e+061 result=40 16:29:52 Get A/D value=-858993460 result=40 16:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:29:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:29:52 Aux= 16:29:52 Message to Camera, serial 280393 queued 16:30:29 Received message from Master: op=PointingHead serial=280406 16:30:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:30:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:30:30 Point started: ret=0 16:30:30 point_skyscan result=0 16:30:30 Check angles 16:30:30 SkyScan query 16:30:31 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.27<-17418 Statuses=0009 0009 16:30:31 Msec=0 True Az=108.885 Ze=-81.27 Az status=0009 Ze status=0009 16:30:31 Check angles 16:30:31 SkyScan query 16:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.66<-18844 Statuses=0008 0009 16:30:32 Msec=750 True Az=112.995 Ze=-102.66 Az status=0008 Ze status=0009 16:30:32 Check angles 16:30:32 SkyScan query 16:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 16:30:32 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 16:30:33 Check angles 16:30:33 SkyScan query 16:30:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 16:30:33 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 16:30:33 Check angles 16:30:33 SkyScan query 16:30:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.525<-23035 Statuses=0008 0009 16:30:34 Msec=3000 True Az=112.995 Ze=-165.525 Az status=0008 Ze status=0009 16:30:34 Check angles 16:30:34 SkyScan query 16:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:30:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:30:35 Message to Master queued w/err=0: serial=280406 error=0 16:30:40 Received message from Master: op=Filter serial=280407 16:30:40 Color wheel filter change from 0 to 0 16:30:40 FLIGetFilterPos err=0 currentPosition=0 16:30:40 FLIGetStepsRemaining err=0 RemainingSteps=0 16:30:40 Filter is already there-color wheel unchanged 16:30:40 Received message from Master: op=Shutter serial=280408 16:30:40 Shutter LASER open 16:30:40 Received message from Camera: op=State serial=280410 16:30:40 GetSingleValue result=40 Value=cccccccc 16:30:40 SkyScan query 16:30:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:30:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:41 Parameters OK 16:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:41 Set A/D data flow result=40 16:30:41 Set A/D channel type result=40 16:30:41 Set A/D encoding result=40 16:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:41 Set channel filter=0.000000e+000 result=40 16:30:41 Config A/D Result=40 16:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:41 Get A/D filter: -9.255963e+061 result=40 16:30:41 Get A/D value=-858993460 result=40 16:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:41 Parameters OK 16:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:41 Set A/D data flow result=40 16:30:41 Set A/D channel type result=40 16:30:41 Set A/D encoding result=40 16:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:41 Set channel filter=0.000000e+000 result=40 16:30:41 Config A/D Result=40 16:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:41 Get A/D filter: -9.255963e+061 result=40 16:30:41 Get A/D value=-858993460 result=40 16:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:30:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:30:41 Aux= 16:30:41 Message to Camera, serial 280410 queued 16:30:49 Received message from Master: op=Shutter serial=280420 16:30:49 Shutter LASER close 16:30:50 Received message from Master: op=PointingHead serial=280424 16:30:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:30:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:30:50 Point started: ret=0 16:30:50 point_skyscan result=0 16:30:51 Check angles 16:30:51 SkyScan query 16:30:51 SkyScan query done: ret=0 az=89.865<-5991 ze=157.14<-1524 Statuses=0009 0009 16:30:51 Msec=0 True Az=89.865 Ze=157.14 Az status=0009 Ze status=0009 16:30:51 Check angles 16:30:51 SkyScan query 16:30:52 SkyScan query done: ret=0 az=72.315<-4821 ze=136.185<-2921 Statuses=0009 0009 16:30:52 Msec=750 True Az=72.315 Ze=136.185 Az status=0009 Ze status=0009 16:30:52 Check angles 16:30:52 SkyScan query 16:30:53 SkyScan query done: ret=0 az=54.975<-3665 ze=115.275<-4315 Statuses=0009 0009 16:30:53 Msec=1500 True Az=54.975 Ze=115.275 Az status=0009 Ze status=0009 16:30:53 Check angles 16:30:53 SkyScan query 16:30:53 SkyScan query done: ret=0 az=40.995<-2733 ze=94.275<-5715 Statuses=0009 0009 16:30:53 Msec=2250 True Az=40.995 Ze=94.275 Az status=0009 Ze status=0009 16:30:54 Check angles 16:30:54 SkyScan query 16:30:54 SkyScan query done: ret=0 az=40.995<-2733 ze=73.32<-7112 Statuses=0008 0009 16:30:54 Msec=3000 True Az=40.995 Ze=73.32 Az status=0008 Ze status=0009 16:30:54 Check angles 16:30:54 SkyScan query 16:30:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.8<-8480 Statuses=0008 0009 16:30:55 Msec=3750 True Az=40.995 Ze=52.8 Az status=0008 Ze status=0009 16:30:55 Check angles 16:30:55 SkyScan query 16:30:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:30:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:30:56 Message to Master queued w/err=0: serial=280424 error=0 16:31:01 Received message from Master: op=Filter serial=280425 16:31:01 Color wheel filter change from 0 to 0 16:31:01 FLIGetFilterPos err=0 currentPosition=0 16:31:01 FLIGetStepsRemaining err=0 RemainingSteps=0 16:31:01 Filter is already there-color wheel unchanged 16:31:01 Received message from Master: op=Shutter serial=280426 16:31:01 Shutter LASER close 16:31:01 Received message from Camera: op=State serial=280428 16:31:01 GetSingleValue result=40 Value=cccccccc 16:31:01 SkyScan query 16:31:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:31:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:02 Parameters OK 16:31:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:02 Set A/D data flow result=40 16:31:02 Set A/D channel type result=40 16:31:02 Set A/D encoding result=40 16:31:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:02 Set channel filter=0.000000e+000 result=40 16:31:02 Config A/D Result=40 16:31:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:02 Get A/D filter: -9.255963e+061 result=40 16:31:02 Get A/D value=-858993460 result=40 16:31:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:02 Parameters OK 16:31:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:02 Set A/D data flow result=40 16:31:02 Set A/D channel type result=40 16:31:02 Set A/D encoding result=40 16:31:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:02 Set channel filter=0.000000e+000 result=40 16:31:02 Config A/D Result=40 16:31:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:02 Get A/D filter: -9.255963e+061 result=40 16:31:02 Get A/D value=-858993460 result=40 16:31:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:02 Aux= 16:31:02 Message to Camera, serial 280428 queued 16:31:38 Received message from Master: op=PointingHead serial=280441 16:31:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:31:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:31:39 Point started: ret=0 16:31:39 point_skyscan result=0 16:31:40 Check angles 16:31:40 SkyScan query 16:31:40 SkyScan query done: ret=0 az=64.395<-4293 ze=66.54<-7564 Statuses=0009 0008 16:31:40 Msec=0 True Az=64.395 Ze=66.54 Az status=0009 Ze status=0008 16:31:40 Check angles 16:31:40 SkyScan query 16:31:41 SkyScan query done: ret=0 az=81.84<-5456 ze=66.495<-7567 Statuses=0009 0008 16:31:41 Msec=750 True Az=81.84 Ze=66.495 Az status=0009 Ze status=0008 16:31:41 Check angles 16:31:41 SkyScan query 16:31:42 SkyScan query done: ret=0 az=99.315<-6621 ze=66.495<-7567 Statuses=0009 0008 16:31:42 Msec=1500 True Az=99.315 Ze=66.495 Az status=0009 Ze status=0008 16:31:42 Check angles 16:31:42 SkyScan query 16:31:42 SkyScan query done: ret=0 az=116.865<-7791 ze=66.495<-7567 Statuses=0009 0008 16:31:42 Msec=2250 True Az=116.865 Ze=66.495 Az status=0009 Ze status=0008 16:31:43 Check angles 16:31:43 SkyScan query 16:31:43 SkyScan query done: ret=0 az=134.16<-8944 ze=66.495<-7567 Statuses=0009 0008 16:31:43 Msec=3000 True Az=134.16 Ze=66.495 Az status=0009 Ze status=0008 16:31:43 Check angles 16:31:43 SkyScan query 16:31:44 SkyScan query done: ret=0 az=151.68<-10112 ze=66.495<-7567 Statuses=0009 0008 16:31:44 Msec=3750 True Az=151.68 Ze=66.495 Az status=0009 Ze status=0008 16:31:44 Check angles 16:31:44 SkyScan query 16:31:45 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:31:45 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:31:45 Message to Master queued w/err=0: serial=280441 error=0 16:31:50 Received message from Master: op=Filter serial=280442 16:31:50 Color wheel filter change from 0 to 0 16:31:50 FLIGetFilterPos err=0 currentPosition=0 16:31:50 FLIGetStepsRemaining err=0 RemainingSteps=0 16:31:50 Filter is already there-color wheel unchanged 16:31:50 Received message from Master: op=Shutter serial=280443 16:31:50 Shutter LASER close 16:31:50 Received message from Camera: op=State serial=280445 16:31:50 GetSingleValue result=40 Value=cccccccc 16:31:50 SkyScan query 16:31:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:31:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:50 Parameters OK 16:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:50 Set A/D data flow result=40 16:31:50 Set A/D channel type result=40 16:31:50 Set A/D encoding result=40 16:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:50 Set channel filter=0.000000e+000 result=40 16:31:50 Config A/D Result=40 16:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:50 Get A/D filter: -9.255963e+061 result=40 16:31:50 Get A/D value=-858993460 result=40 16:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:50 Parameters OK 16:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:50 Set A/D data flow result=40 16:31:50 Set A/D channel type result=40 16:31:50 Set A/D encoding result=40 16:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:50 Set channel filter=0.000000e+000 result=40 16:31:50 Config A/D Result=40 16:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:50 Get A/D filter: -9.255963e+061 result=40 16:31:50 Get A/D value=-858993460 result=40 16:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:50 Aux= 16:31:50 Message to Camera, serial 280445 queued 16:32:27 Received message from Master: op=PointingHead serial=280458 16:32:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:32:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:32:28 Point started: ret=0 16:32:28 point_skyscan result=0 16:32:28 Check angles 16:32:28 SkyScan query 16:32:29 SkyScan query done: ret=0 az=134.835<-8989 ze=36.57<-9562 Statuses=0009 0009 16:32:29 Msec=0 True Az=134.835 Ze=36.57 Az status=0009 Ze status=0009 16:32:29 Check angles 16:32:29 SkyScan query 16:32:30 SkyScan query done: ret=0 az=117.375<-7825 ze=15.63<-10958 Statuses=0009 0009 16:32:30 Msec=750 True Az=117.375 Ze=15.63 Az status=0009 Ze status=0009 16:32:30 Check angles 16:32:30 SkyScan query 16:32:30 SkyScan query done: ret=0 az=100.005<-6667 ze=-5.325<-12355 Statuses=0009 0009 16:32:30 Msec=1500 True Az=100.005 Ze=-5.325 Az status=0009 Ze status=0009 16:32:31 Check angles 16:32:31 SkyScan query 16:32:31 SkyScan query done: ret=0 az=82.5<-5500 ze=-26.31<-13754 Statuses=0009 0009 16:32:31 Msec=2250 True Az=82.5 Ze=-26.31 Az status=0009 Ze status=0009 16:32:31 Check angles 16:32:31 SkyScan query 16:32:32 SkyScan query done: ret=0 az=64.935<-4329 ze=-38.58<-14572 Statuses=0009 0008 16:32:32 Msec=3000 True Az=64.935 Ze=-38.58 Az status=0009 Ze status=0008 16:32:32 Check angles 16:32:32 SkyScan query 16:32:33 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.52<-14568 Statuses=0009 0008 16:32:33 Msec=3750 True Az=47.415 Ze=-38.52 Az status=0009 Ze status=0008 16:32:33 Check angles 16:32:33 SkyScan query 16:32:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:32:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:32:33 Message to Master queued w/err=0: serial=280458 error=0 16:32:38 Received message from Master: op=Filter serial=280459 16:32:38 Color wheel filter change from 0 to 0 16:32:38 FLIGetFilterPos err=0 currentPosition=0 16:32:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:32:38 Filter is already there-color wheel unchanged 16:32:39 Received message from Master: op=Shutter serial=280460 16:32:39 Shutter LASER close 16:32:39 Received message from Camera: op=State serial=280462 16:32:39 GetSingleValue result=40 Value=cccccccc 16:32:39 SkyScan query 16:32:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:32:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:39 Parameters OK 16:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:39 Set A/D data flow result=40 16:32:39 Set A/D channel type result=40 16:32:39 Set A/D encoding result=40 16:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:39 Set channel filter=0.000000e+000 result=40 16:32:39 Config A/D Result=40 16:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:39 Get A/D filter: -9.255963e+061 result=40 16:32:39 Get A/D value=-858993460 result=40 16:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:39 Parameters OK 16:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:39 Set A/D data flow result=40 16:32:39 Set A/D channel type result=40 16:32:39 Set A/D encoding result=40 16:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:39 Set channel filter=0.000000e+000 result=40 16:32:39 Config A/D Result=40 16:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:39 Get A/D filter: -9.255963e+061 result=40 16:32:39 Get A/D value=-858993460 result=40 16:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:32:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:32:39 Aux= 16:32:39 Message to Camera, serial 280462 queued 16:33:16 Received message from Master: op=PointingHead serial=280475 16:33:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:33:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:33:16 Point started: ret=0 16:33:16 point_skyscan result=0 16:33:17 Check angles 16:33:17 SkyScan query 16:33:18 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.625<-16575 Statuses=0009 0009 16:33:18 Msec=0 True Az=64.275 Ze=-68.625 Az status=0009 Ze status=0009 16:33:18 Check angles 16:33:18 SkyScan query 16:33:19 SkyScan query done: ret=0 az=81.675<-5445 ze=-89.61<-17974 Statuses=0009 0009 16:33:19 Msec=750 True Az=81.675 Ze=-89.61 Az status=0009 Ze status=0009 16:33:19 Check angles 16:33:19 SkyScan query 16:33:19 SkyScan query done: ret=0 az=99.63<-6642 ze=-110.955<-19397 Statuses=0009 0009 16:33:19 Msec=1500 True Az=99.63 Ze=-110.955 Az status=0009 Ze status=0009 16:33:19 Check angles 16:33:19 SkyScan query 16:33:20 SkyScan query done: ret=0 az=117<-7800 ze=-131.895<-20793 Statuses=0009 0009 16:33:20 Msec=2250 True Az=117 Ze=-131.895 Az status=0009 Ze status=0009 16:33:20 Check angles 16:33:20 SkyScan query 16:33:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 16:33:21 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 16:33:21 Check angles 16:33:21 SkyScan query 16:33:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 16:33:22 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 16:33:22 Message to Master queued w/err=0: serial=280475 error=0 16:33:27 Received message from Master: op=Filter serial=280476 16:33:27 Color wheel filter change from 0 to 0 16:33:27 FLIGetFilterPos err=0 currentPosition=0 16:33:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:33:27 Filter is already there-color wheel unchanged 16:33:27 Received message from Master: op=Shutter serial=280477 16:33:27 Shutter LASER close 16:33:27 Received message from Camera: op=State serial=280479 16:33:27 GetSingleValue result=40 Value=cccccccc 16:33:27 SkyScan query 16:33:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:33:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:27 Parameters OK 16:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:27 Set A/D data flow result=40 16:33:27 Set A/D channel type result=40 16:33:27 Set A/D encoding result=40 16:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:27 Set channel filter=0.000000e+000 result=40 16:33:27 Config A/D Result=40 16:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:27 Get A/D filter: -9.255963e+061 result=40 16:33:27 Get A/D value=-858993460 result=40 16:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:27 Parameters OK 16:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:27 Set A/D data flow result=40 16:33:27 Set A/D channel type result=40 16:33:27 Set A/D encoding result=40 16:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:27 Set channel filter=0.000000e+000 result=40 16:33:27 Config A/D Result=40 16:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:27 Get A/D filter: -9.255963e+061 result=40 16:33:27 Get A/D value=-858993460 result=40 16:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:33:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:33:27 Aux= 16:33:27 Message to Camera, serial 280479 queued 16:34:03 Received message from Master: op=PointingHead serial=280491 16:34:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:34:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:34:04 Point started: ret=0 16:34:04 point_skyscan result=0 16:34:04 Check angles 16:34:04 SkyScan query 16:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0009 0009 16:34:05 Msec=0 True Az=112.995 Ze=-170.91 Az status=0009 Ze status=0009 16:34:05 Check angles 16:34:05 SkyScan query 16:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:34:06 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:34:06 Message to Master queued w/err=0: serial=280491 error=0 16:34:11 Received message from Master: op=Filter serial=280492 16:34:11 Color wheel filter change from 0 to 0 16:34:11 FLIGetFilterPos err=0 currentPosition=0 16:34:11 FLIGetStepsRemaining err=0 RemainingSteps=0 16:34:11 Filter is already there-color wheel unchanged 16:34:11 Received message from Master: op=Shutter serial=280493 16:34:11 Shutter LASER open 16:34:11 Received message from Camera: op=State serial=280495 16:34:11 GetSingleValue result=40 Value=cccccccc 16:34:11 SkyScan query 16:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:34:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:12 Parameters OK 16:34:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:12 Set A/D data flow result=40 16:34:12 Set A/D channel type result=40 16:34:12 Set A/D encoding result=40 16:34:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:12 Set channel filter=0.000000e+000 result=40 16:34:12 Config A/D Result=40 16:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:12 Get A/D filter: -9.255963e+061 result=40 16:34:12 Get A/D value=-858993460 result=40 16:34:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:12 Parameters OK 16:34:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:12 Set A/D data flow result=40 16:34:12 Set A/D channel type result=40 16:34:12 Set A/D encoding result=40 16:34:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:12 Set channel filter=0.000000e+000 result=40 16:34:12 Config A/D Result=40 16:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:12 Get A/D filter: -9.255963e+061 result=40 16:34:12 Get A/D value=-858993460 result=40 16:34:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:34:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:34:12 Aux= 16:34:12 Message to Camera, serial 280495 queued 16:34:20 Received message from Master: op=Shutter serial=280505 16:34:20 Shutter LASER close 16:34:21 Received message from Master: op=PointingHead serial=280509 16:34:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:34:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:34:21 Point started: ret=0 16:34:21 point_skyscan result=0 16:34:22 Check angles 16:34:22 SkyScan query 16:34:22 SkyScan query done: ret=0 az=136.125<-9075 ze=-143.145<-21543 Statuses=0009 0009 16:34:22 Msec=0 True Az=136.125 Ze=-143.145 Az status=0009 Ze status=0009 16:34:23 Check angles 16:34:23 SkyScan query 16:34:23 SkyScan query done: ret=0 az=153.93<-10262 ze=-121.755<-20117 Statuses=0009 0009 16:34:23 Msec=750 True Az=153.93 Ze=-121.755 Az status=0009 Ze status=0009 16:34:23 Check angles 16:34:23 SkyScan query 16:34:24 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.71<-18714 Statuses=0009 0009 16:34:24 Msec=1500 True Az=171.42 Ze=-100.71 Az status=0009 Ze status=0009 16:34:24 Check angles 16:34:24 SkyScan query 16:34:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 16:34:25 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 16:34:25 Check angles 16:34:25 SkyScan query 16:34:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.845<-15923 Statuses=0008 0009 16:34:25 Msec=3000 True Az=176.01 Ze=-58.845 Az status=0008 Ze status=0009 16:34:26 Check angles 16:34:26 SkyScan query 16:34:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:34:26 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:34:26 Message to Master queued w/err=0: serial=280509 error=0 16:34:31 Received message from Master: op=Filter serial=280510 16:34:31 Color wheel filter change from 0 to 0 16:34:31 FLIGetFilterPos err=0 currentPosition=0 16:34:31 FLIGetStepsRemaining err=0 RemainingSteps=0 16:34:31 Filter is already there-color wheel unchanged 16:34:31 Received message from Master: op=Shutter serial=280511 16:34:31 Shutter LASER close 16:34:31 Received message from Camera: op=State serial=280513 16:34:31 GetSingleValue result=40 Value=cccccccc 16:34:31 SkyScan query 16:34:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:34:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:32 Parameters OK 16:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:32 Set A/D data flow result=40 16:34:32 Set A/D channel type result=40 16:34:32 Set A/D encoding result=40 16:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:32 Set channel filter=0.000000e+000 result=40 16:34:32 Config A/D Result=40 16:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:32 Get A/D filter: -9.255963e+061 result=40 16:34:32 Get A/D value=-858993460 result=40 16:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:32 Parameters OK 16:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:32 Set A/D data flow result=40 16:34:32 Set A/D channel type result=40 16:34:32 Set A/D encoding result=40 16:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:32 Set channel filter=0.000000e+000 result=40 16:34:32 Config A/D Result=40 16:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:32 Get A/D filter: -9.255963e+061 result=40 16:34:32 Get A/D value=-858993460 result=40 16:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:34:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:34:32 Aux= 16:34:32 Message to Camera, serial 280513 queued 16:35:09 Received message from Master: op=PointingHead serial=280526 16:35:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:35:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:35:09 Point started: ret=0 16:35:09 point_skyscan result=0 16:35:10 Check angles 16:35:10 SkyScan query 16:35:11 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.21<-13414 Statuses=0009 0009 16:35:11 Msec=0 True Az=152.655 Ze=-21.21 Az status=0009 Ze status=0009 16:35:11 Check angles 16:35:11 SkyScan query 16:35:11 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.27<-12018 Statuses=0009 0009 16:35:11 Msec=750 True Az=135.15 Ze=-0.27 Az status=0009 Ze status=0009 16:35:11 Check angles 16:35:11 SkyScan query 16:35:12 SkyScan query done: ret=0 az=117.33<-7822 ze=21.135<-10591 Statuses=0009 0009 16:35:12 Msec=1500 True Az=117.33 Ze=21.135 Az status=0009 Ze status=0009 16:35:12 Check angles 16:35:12 SkyScan query 16:35:13 SkyScan query done: ret=0 az=99.495<-6633 ze=42.45<-9170 Statuses=0009 0009 16:35:13 Msec=2250 True Az=99.495 Ze=42.45 Az status=0009 Ze status=0009 16:35:13 Check angles 16:35:13 SkyScan query 16:35:14 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 16:35:14 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 16:35:14 Check angles 16:35:14 SkyScan query 16:35:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:35:14 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 16:35:14 Message to Master queued w/err=0: serial=280526 error=0 16:35:19 Received message from Master: op=Filter serial=280527 16:35:19 Color wheel filter change from 0 to 0 16:35:19 FLIGetFilterPos err=0 currentPosition=0 16:35:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:35:19 Filter is already there-color wheel unchanged 16:35:20 Received message from Master: op=Shutter serial=280528 16:35:20 Shutter LASER close 16:35:20 Received message from Camera: op=State serial=280530 16:35:20 GetSingleValue result=40 Value=cccccccc 16:35:20 SkyScan query 16:35:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:35:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:20 Parameters OK 16:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:20 Set A/D data flow result=40 16:35:20 Set A/D channel type result=40 16:35:20 Set A/D encoding result=40 16:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:20 Set channel filter=0.000000e+000 result=40 16:35:20 Config A/D Result=40 16:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:20 Get A/D filter: -9.255963e+061 result=40 16:35:20 Get A/D value=-858993460 result=40 16:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:20 Parameters OK 16:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:20 Set A/D data flow result=40 16:35:20 Set A/D channel type result=40 16:35:20 Set A/D encoding result=40 16:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:20 Set channel filter=0.000000e+000 result=40 16:35:20 Config A/D Result=40 16:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:20 Get A/D filter: -9.255963e+061 result=40 16:35:20 Get A/D value=-858993460 result=40 16:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:35:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:35:20 Aux= 16:35:20 Message to Camera, serial 280530 queued [UTC 2018-12-19 16:35:52] 16:35:57 Received message from Master: op=PointingHead serial=280543 16:35:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:35:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:35:57 Point started: ret=0 16:35:57 point_skyscan result=0 16:35:58 Check angles 16:35:58 SkyScan query 16:35:59 SkyScan query done: ret=0 az=109.44<-7296 ze=38.49<-9434 Statuses=0009 0008 16:35:59 Msec=0 True Az=109.44 Ze=38.49 Az status=0009 Ze status=0008 16:35:59 Check angles 16:35:59 SkyScan query 16:35:59 SkyScan query done: ret=0 az=126.87<-8458 ze=38.505<-9433 Statuses=0009 0008 16:35:59 Msec=750 True Az=126.87 Ze=38.505 Az status=0009 Ze status=0008 16:36:00 Check angles 16:36:00 SkyScan query 16:36:00 SkyScan query done: ret=0 az=144.72<-9648 ze=38.505<-9433 Statuses=0009 0008 16:36:00 Msec=1500 True Az=144.72 Ze=38.505 Az status=0009 Ze status=0008 16:36:00 Check angles 16:36:00 SkyScan query 16:36:01 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 16:36:01 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 16:36:01 Check angles 16:36:01 SkyScan query 16:36:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:36:02 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:36:02 Check angles 16:36:02 SkyScan query 16:36:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:36:02 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:36:02 Message to Master queued w/err=0: serial=280543 error=0 16:36:07 Received message from Master: op=Filter serial=280544 16:36:07 Color wheel filter change from 0 to 0 16:36:07 FLIGetFilterPos err=0 currentPosition=0 16:36:07 FLIGetStepsRemaining err=0 RemainingSteps=0 16:36:07 Filter is already there-color wheel unchanged 16:36:08 Received message from Master: op=Shutter serial=280545 16:36:08 Shutter LASER close 16:36:08 Received message from Camera: op=State serial=280547 16:36:08 GetSingleValue result=40 Value=cccccccc 16:36:08 SkyScan query 16:36:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:36:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:08 Parameters OK 16:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:08 Set A/D data flow result=40 16:36:08 Set A/D channel type result=40 16:36:08 Set A/D encoding result=40 16:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:08 Set channel filter=0.000000e+000 result=40 16:36:08 Config A/D Result=40 16:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:08 Get A/D filter: -9.255963e+061 result=40 16:36:08 Get A/D value=-858993460 result=40 16:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:08 Parameters OK 16:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:08 Set A/D data flow result=40 16:36:08 Set A/D channel type result=40 16:36:08 Set A/D encoding result=40 16:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:08 Set channel filter=0.000000e+000 result=40 16:36:08 Config A/D Result=40 16:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:08 Get A/D filter: -9.255963e+061 result=40 16:36:08 Get A/D value=-858993460 result=40 16:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:36:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:36:08 Aux= 16:36:08 Message to Camera, serial 280547 queued 16:36:45 Received message from Master: op=PointingHead serial=280560 16:36:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:36:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:36:45 Point started: ret=0 16:36:45 point_skyscan result=0 16:36:46 Check angles 16:36:46 SkyScan query 16:36:47 SkyScan query done: ret=0 az=153.15<-10210 ze=8.865<-11409 Statuses=0009 0009 16:36:47 Msec=0 True Az=153.15 Ze=8.865 Az status=0009 Ze status=0009 16:36:47 Check angles 16:36:47 SkyScan query 16:36:47 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.12<-12808 Statuses=0009 0009 16:36:47 Msec=750 True Az=135.675 Ze=-12.12 Az status=0009 Ze status=0009 16:36:48 Check angles 16:36:48 SkyScan query 16:36:48 SkyScan query done: ret=0 az=118.11<-7874 ze=-33.015<-14201 Statuses=0009 0009 16:36:48 Msec=1500 True Az=118.11 Ze=-33.015 Az status=0009 Ze status=0009 16:36:48 Check angles 16:36:48 SkyScan query 16:36:49 SkyScan query done: ret=0 az=100.755<-6717 ze=-51.525<-15435 Statuses=0009 0009 16:36:49 Msec=2250 True Az=100.755 Ze=-51.525 Az status=0009 Ze status=0009 16:36:49 Check angles 16:36:49 SkyScan query 16:36:50 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 16:36:50 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 16:36:50 Check angles 16:36:50 SkyScan query 16:36:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:36:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:36:50 Message to Master queued w/err=0: serial=280560 error=0 16:36:55 Received message from Master: op=Filter serial=280561 16:36:55 Color wheel filter change from 0 to 0 16:36:55 FLIGetFilterPos err=0 currentPosition=0 16:36:55 FLIGetStepsRemaining err=0 RemainingSteps=0 16:36:55 Filter is already there-color wheel unchanged 16:36:56 Received message from Master: op=Shutter serial=280562 16:36:56 Shutter LASER close 16:36:56 Received message from Camera: op=State serial=280564 16:36:56 GetSingleValue result=40 Value=cccccccc 16:36:56 SkyScan query 16:36:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:36:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:56 Parameters OK 16:36:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:56 Set A/D data flow result=40 16:36:56 Set A/D channel type result=40 16:36:56 Set A/D encoding result=40 16:36:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:56 Set channel filter=0.000000e+000 result=40 16:36:56 Config A/D Result=40 16:36:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:56 Get A/D filter: -9.255963e+061 result=40 16:36:56 Get A/D value=-858993460 result=40 16:36:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:56 Parameters OK 16:36:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:56 Set A/D data flow result=40 16:36:56 Set A/D channel type result=40 16:36:56 Set A/D encoding result=40 16:36:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:56 Set channel filter=0.000000e+000 result=40 16:36:56 Config A/D Result=40 16:36:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:56 Get A/D filter: -9.255963e+061 result=40 16:36:56 Get A/D value=-858993460 result=40 16:36:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:36:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:36:56 Aux= 16:36:56 Message to Camera, serial 280564 queued 16:37:33 Received message from Master: op=PointingHead serial=280577 16:37:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:37:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:37:33 Point started: ret=0 16:37:33 point_skyscan result=0 16:37:34 Check angles 16:37:34 SkyScan query 16:37:35 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.3<-17420 Statuses=0009 0009 16:37:35 Msec=0 True Az=109.185 Ze=-81.3 Az status=0009 Ze status=0009 16:37:35 Check angles 16:37:35 SkyScan query 16:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 16:37:36 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 16:37:36 Check angles 16:37:36 SkyScan query 16:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 16:37:36 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 16:37:36 Check angles 16:37:36 SkyScan query 16:37:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 16:37:37 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 16:37:37 Check angles 16:37:37 SkyScan query 16:37:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 16:37:38 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 16:37:38 Check angles 16:37:38 SkyScan query 16:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:37:39 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:37:39 Message to Master queued w/err=0: serial=280577 error=0 16:37:44 Received message from Master: op=Filter serial=280578 16:37:44 Color wheel filter change from 0 to 0 16:37:44 FLIGetFilterPos err=0 currentPosition=0 16:37:44 FLIGetStepsRemaining err=0 RemainingSteps=0 16:37:44 Filter is already there-color wheel unchanged 16:37:44 Received message from Master: op=Shutter serial=280579 16:37:44 Shutter LASER open 16:37:44 Received message from Camera: op=State serial=280581 16:37:44 GetSingleValue result=40 Value=cccccccc 16:37:44 SkyScan query 16:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:37:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:45 Parameters OK 16:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:45 Set A/D data flow result=40 16:37:45 Set A/D channel type result=40 16:37:45 Set A/D encoding result=40 16:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:45 Set channel filter=0.000000e+000 result=40 16:37:45 Config A/D Result=40 16:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:45 Get A/D filter: -9.255963e+061 result=40 16:37:45 Get A/D value=-858993460 result=40 16:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:45 Parameters OK 16:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:45 Set A/D data flow result=40 16:37:45 Set A/D channel type result=40 16:37:45 Set A/D encoding result=40 16:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:45 Set channel filter=0.000000e+000 result=40 16:37:45 Config A/D Result=40 16:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:45 Get A/D filter: -9.255963e+061 result=40 16:37:45 Get A/D value=-858993460 result=40 16:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:37:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:37:45 Aux= 16:37:45 Message to Camera, serial 280581 queued 16:37:53 Received message from Master: op=Shutter serial=280591 16:37:53 Shutter LASER close 16:37:53 Received message from Master: op=PointingHead serial=280595 16:37:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:37:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:37:54 Point started: ret=0 16:37:54 point_skyscan result=0 16:37:55 Check angles 16:37:55 SkyScan query 16:37:55 SkyScan query done: ret=0 az=90.15<-6010 ze=157.56<-1496 Statuses=0009 0009 16:37:55 Msec=0 True Az=90.15 Ze=157.56 Az status=0009 Ze status=0009 16:37:55 Check angles 16:37:55 SkyScan query 16:37:56 SkyScan query done: ret=0 az=72.69<-4846 ze=136.56<-2896 Statuses=0009 0009 16:37:56 Msec=750 True Az=72.69 Ze=136.56 Az status=0009 Ze status=0009 16:37:56 Check angles 16:37:56 SkyScan query 16:37:57 SkyScan query done: ret=0 az=54.825<-3655 ze=115.23<-4318 Statuses=0009 0009 16:37:57 Msec=1500 True Az=54.825 Ze=115.23 Az status=0009 Ze status=0009 16:37:57 Check angles 16:37:57 SkyScan query 16:37:57 SkyScan query done: ret=0 az=40.995<-2733 ze=94.245<-5717 Statuses=0009 0009 16:37:57 Msec=2250 True Az=40.995 Ze=94.245 Az status=0009 Ze status=0009 16:37:58 Check angles 16:37:58 SkyScan query 16:37:58 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 16:37:58 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 16:37:58 Check angles 16:37:58 SkyScan query 16:37:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 16:37:59 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 16:37:59 Check angles 16:37:59 SkyScan query 16:38:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:38:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:38:00 Message to Master queued w/err=0: serial=280595 error=0 16:38:05 Received message from Master: op=Filter serial=280596 16:38:05 Color wheel filter change from 0 to 0 16:38:05 FLIGetFilterPos err=0 currentPosition=0 16:38:05 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:05 Filter is already there-color wheel unchanged 16:38:05 Received message from Master: op=Shutter serial=280597 16:38:05 Shutter LASER close 16:38:05 Received message from Camera: op=State serial=280599 16:38:05 GetSingleValue result=40 Value=cccccccc 16:38:05 SkyScan query 16:38:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:38:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:06 Parameters OK 16:38:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:06 Set A/D data flow result=40 16:38:06 Set A/D channel type result=40 16:38:06 Set A/D encoding result=40 16:38:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:06 Set channel filter=0.000000e+000 result=40 16:38:06 Config A/D Result=40 16:38:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:06 Get A/D filter: -9.255963e+061 result=40 16:38:06 Get A/D value=-858993460 result=40 16:38:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:06 Parameters OK 16:38:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:06 Set A/D data flow result=40 16:38:06 Set A/D channel type result=40 16:38:06 Set A/D encoding result=40 16:38:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:06 Set channel filter=0.000000e+000 result=40 16:38:06 Config A/D Result=40 16:38:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:06 Get A/D filter: -9.255963e+061 result=40 16:38:06 Get A/D value=-858993460 result=40 16:38:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:06 Aux= 16:38:06 Message to Camera, serial 280599 queued 16:38:42 Received message from Master: op=PointingHead serial=280612 16:38:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:38:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:38:43 Point started: ret=0 16:38:43 point_skyscan result=0 16:38:43 Check angles 16:38:43 SkyScan query 16:38:44 SkyScan query done: ret=0 az=63.885<-4259 ze=66.54<-7564 Statuses=0009 0008 16:38:44 Msec=0 True Az=63.885 Ze=66.54 Az status=0009 Ze status=0008 16:38:44 Check angles 16:38:44 SkyScan query 16:38:45 SkyScan query done: ret=0 az=81.705<-5447 ze=66.51<-7566 Statuses=0009 0008 16:38:45 Msec=750 True Az=81.705 Ze=66.51 Az status=0009 Ze status=0008 16:38:45 Check angles 16:38:45 SkyScan query 16:38:46 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 16:38:46 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 16:38:46 Check angles 16:38:46 SkyScan query 16:38:46 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 16:38:46 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 16:38:47 Check angles 16:38:47 SkyScan query 16:38:47 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 16:38:47 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 16:38:47 Check angles 16:38:47 SkyScan query 16:38:48 SkyScan query done: ret=0 az=151.98<-10132 ze=66.495<-7567 Statuses=0009 0008 16:38:48 Msec=3750 True Az=151.98 Ze=66.495 Az status=0009 Ze status=0008 16:38:48 Check angles 16:38:48 SkyScan query 16:38:49 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:38:49 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:38:49 Message to Master queued w/err=0: serial=280612 error=0 16:38:54 Received message from Master: op=Filter serial=280613 16:38:54 Color wheel filter change from 0 to 0 16:38:54 FLIGetFilterPos err=0 currentPosition=0 16:38:54 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:54 Filter is already there-color wheel unchanged 16:38:54 Received message from Master: op=Shutter serial=280614 16:38:54 Shutter LASER close 16:38:54 Received message from Camera: op=State serial=280616 16:38:54 GetSingleValue result=40 Value=cccccccc 16:38:54 SkyScan query 16:38:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:38:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:54 Parameters OK 16:38:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:54 Set A/D data flow result=40 16:38:54 Set A/D channel type result=40 16:38:54 Set A/D encoding result=40 16:38:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:54 Set channel filter=0.000000e+000 result=40 16:38:54 Config A/D Result=40 16:38:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:54 Get A/D filter: -9.255963e+061 result=40 16:38:54 Get A/D value=-858993460 result=40 16:38:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:54 Parameters OK 16:38:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:54 Set A/D data flow result=40 16:38:54 Set A/D channel type result=40 16:38:54 Set A/D encoding result=40 16:38:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:54 Set channel filter=0.000000e+000 result=40 16:38:54 Config A/D Result=40 16:38:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:54 Get A/D filter: -9.255963e+061 result=40 16:38:54 Get A/D value=-858993460 result=40 16:38:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:54 Aux= 16:38:54 Message to Camera, serial 280616 queued 16:39:31 Received message from Master: op=PointingHead serial=280629 16:39:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:39:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:39:32 Point started: ret=0 16:39:32 point_skyscan result=0 16:39:32 Check angles 16:39:32 SkyScan query 16:39:33 SkyScan query done: ret=0 az=134.595<-8973 ze=36.36<-9576 Statuses=0009 0009 16:39:33 Msec=0 True Az=134.595 Ze=36.36 Az status=0009 Ze status=0009 16:39:33 Check angles 16:39:33 SkyScan query 16:39:34 SkyScan query done: ret=0 az=116.88<-7792 ze=14.94<-11004 Statuses=0009 0009 16:39:34 Msec=750 True Az=116.88 Ze=14.94 Az status=0009 Ze status=0009 16:39:34 Check angles 16:39:34 SkyScan query 16:39:34 SkyScan query done: ret=0 az=99.39<-6626 ze=-6.06<-12404 Statuses=0009 0009 16:39:34 Msec=1500 True Az=99.39 Ze=-6.06 Az status=0009 Ze status=0009 16:39:35 Check angles 16:39:35 SkyScan query 16:39:35 SkyScan query done: ret=0 az=82.005<-5467 ze=-27<-13800 Statuses=0009 0009 16:39:35 Msec=2250 True Az=82.005 Ze=-27 Az status=0009 Ze status=0009 16:39:35 Check angles 16:39:35 SkyScan query 16:39:36 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.58<-14572 Statuses=0009 0008 16:39:36 Msec=3000 True Az=64.44 Ze=-38.58 Az status=0009 Ze status=0008 16:39:36 Check angles 16:39:36 SkyScan query 16:39:37 SkyScan query done: ret=0 az=46.53<-3102 ze=-38.52<-14568 Statuses=0009 0008 16:39:37 Msec=3750 True Az=46.53 Ze=-38.52 Az status=0009 Ze status=0008 16:39:37 Check angles 16:39:37 SkyScan query 16:39:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:39:37 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:39:37 Message to Master queued w/err=0: serial=280629 error=0 16:39:42 Received message from Master: op=Filter serial=280630 16:39:42 Color wheel filter change from 0 to 0 16:39:42 FLIGetFilterPos err=0 currentPosition=0 16:39:42 FLIGetStepsRemaining err=0 RemainingSteps=0 16:39:42 Filter is already there-color wheel unchanged 16:39:43 Received message from Master: op=Shutter serial=280631 16:39:43 Shutter LASER close 16:39:43 Received message from Camera: op=State serial=280633 16:39:43 GetSingleValue result=40 Value=cccccccc 16:39:43 SkyScan query 16:39:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:39:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:43 Parameters OK 16:39:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:43 Set A/D data flow result=40 16:39:43 Set A/D channel type result=40 16:39:43 Set A/D encoding result=40 16:39:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:43 Set channel filter=0.000000e+000 result=40 16:39:43 Config A/D Result=40 16:39:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:43 Get A/D filter: -9.255963e+061 result=40 16:39:43 Get A/D value=-858993460 result=40 16:39:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:43 Parameters OK 16:39:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:43 Set A/D data flow result=40 16:39:43 Set A/D channel type result=40 16:39:43 Set A/D encoding result=40 16:39:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:43 Set channel filter=0.000000e+000 result=40 16:39:43 Config A/D Result=40 16:39:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:43 Get A/D filter: -9.255963e+061 result=40 16:39:43 Get A/D value=-858993460 result=40 16:39:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:39:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:39:43 Aux= 16:39:43 Message to Camera, serial 280633 queued 16:40:20 Received message from Master: op=PointingHead serial=280646 16:40:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:40:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:40:20 Point started: ret=0 16:40:20 point_skyscan result=0 16:40:21 Check angles 16:40:21 SkyScan query 16:40:22 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.745<-16583 Statuses=0009 0009 16:40:22 Msec=0 True Az=64.275 Ze=-68.745 Az status=0009 Ze status=0009 16:40:22 Check angles 16:40:22 SkyScan query 16:40:23 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.7<-17980 Statuses=0009 0009 16:40:23 Msec=750 True Az=81.81 Ze=-89.7 Az status=0009 Ze status=0009 16:40:23 Check angles 16:40:23 SkyScan query 16:40:23 SkyScan query done: ret=0 az=99.675<-6645 ze=-111.09<-19406 Statuses=0009 0009 16:40:23 Msec=1500 True Az=99.675 Ze=-111.09 Az status=0009 Ze status=0009 16:40:23 Check angles 16:40:23 SkyScan query 16:40:24 SkyScan query done: ret=0 az=117.075<-7805 ze=-132.015<-20801 Statuses=0009 0009 16:40:24 Msec=2250 True Az=117.075 Ze=-132.015 Az status=0009 Ze status=0009 16:40:24 Check angles 16:40:24 SkyScan query 16:40:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 16:40:25 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 16:40:25 Check angles 16:40:25 SkyScan query 16:40:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 16:40:26 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 16:40:26 Message to Master queued w/err=0: serial=280646 error=0 16:40:31 Received message from Master: op=Filter serial=280647 16:40:31 Color wheel filter change from 0 to 0 16:40:31 FLIGetFilterPos err=0 currentPosition=0 16:40:31 FLIGetStepsRemaining err=0 RemainingSteps=0 16:40:31 Filter is already there-color wheel unchanged 16:40:31 Received message from Master: op=Shutter serial=280648 16:40:31 Shutter LASER close 16:40:31 Received message from Camera: op=State serial=280650 16:40:31 GetSingleValue result=40 Value=cccccccc 16:40:31 SkyScan query 16:40:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:40:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:31 Parameters OK 16:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:31 Set A/D data flow result=40 16:40:31 Set A/D channel type result=40 16:40:31 Set A/D encoding result=40 16:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:31 Set channel filter=0.000000e+000 result=40 16:40:31 Config A/D Result=40 16:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:31 Get A/D filter: -9.255963e+061 result=40 16:40:31 Get A/D value=-858993460 result=40 16:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:31 Parameters OK 16:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:31 Set A/D data flow result=40 16:40:31 Set A/D channel type result=40 16:40:31 Set A/D encoding result=40 16:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:31 Set channel filter=0.000000e+000 result=40 16:40:31 Config A/D Result=40 16:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:31 Get A/D filter: -9.255963e+061 result=40 16:40:31 Get A/D value=-858993460 result=40 16:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:40:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:40:31 Aux= 16:40:31 Message to Camera, serial 280650 queued 16:41:08 Received message from Master: op=PointingHead serial=280663 16:41:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:41:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:41:09 Point started: ret=0 16:41:09 point_skyscan result=0 16:41:09 Check angles 16:41:09 SkyScan query 16:41:10 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 16:41:10 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 16:41:10 Check angles 16:41:10 SkyScan query 16:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:41:11 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:41:11 Message to Master queued w/err=0: serial=280663 error=0 16:41:16 Received message from Master: op=Filter serial=280664 16:41:16 Color wheel filter change from 0 to 0 16:41:16 FLIGetFilterPos err=0 currentPosition=0 16:41:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:16 Filter is already there-color wheel unchanged 16:41:16 Received message from Master: op=Shutter serial=280665 16:41:16 Shutter LASER open 16:41:16 Received message from Camera: op=State serial=280667 16:41:16 GetSingleValue result=40 Value=cccccccc 16:41:16 SkyScan query 16:41:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:41:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:17 Parameters OK 16:41:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:17 Set A/D data flow result=40 16:41:17 Set A/D channel type result=40 16:41:17 Set A/D encoding result=40 16:41:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:17 Set channel filter=0.000000e+000 result=40 16:41:17 Config A/D Result=40 16:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:17 Get A/D filter: -9.255963e+061 result=40 16:41:17 Get A/D value=-858993460 result=40 16:41:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:17 Parameters OK 16:41:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:17 Set A/D data flow result=40 16:41:17 Set A/D channel type result=40 16:41:17 Set A/D encoding result=40 16:41:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:17 Set channel filter=0.000000e+000 result=40 16:41:17 Config A/D Result=40 16:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:17 Get A/D filter: -9.255963e+061 result=40 16:41:17 Get A/D value=-858993460 result=40 16:41:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:41:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:41:17 Aux= 16:41:17 Message to Camera, serial 280667 queued 16:41:24 Received message from Master: op=Shutter serial=280676 16:41:24 Shutter LASER close 16:41:25 Received message from Master: op=PointingHead serial=280680 16:41:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:41:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:41:25 Point started: ret=0 16:41:25 point_skyscan result=0 16:41:26 Check angles 16:41:26 SkyScan query 16:41:26 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.415<-21561 Statuses=0009 0009 16:41:26 Msec=0 True Az=135.84 Ze=-143.415 Az status=0009 Ze status=0009 16:41:26 Check angles 16:41:26 SkyScan query 16:41:27 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.43<-20162 Statuses=0009 0009 16:41:27 Msec=750 True Az=153.3 Ze=-122.43 Az status=0009 Ze status=0009 16:41:27 Check angles 16:41:27 SkyScan query 16:41:28 SkyScan query done: ret=0 az=171.15<-11410 ze=-101.04<-18736 Statuses=0009 0009 16:41:28 Msec=1500 True Az=171.15 Ze=-101.04 Az status=0009 Ze status=0009 16:41:28 Check angles 16:41:28 SkyScan query 16:41:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 16:41:29 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 16:41:29 Check angles 16:41:29 SkyScan query 16:41:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.665<-15911 Statuses=0008 0009 16:41:29 Msec=3000 True Az=176.01 Ze=-58.665 Az status=0008 Ze status=0009 16:41:30 Check angles 16:41:30 SkyScan query 16:41:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 16:41:30 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 16:41:30 Message to Master queued w/err=0: serial=280680 error=0 16:41:35 Received message from Master: op=Filter serial=280681 16:41:35 Color wheel filter change from 0 to 0 16:41:35 FLIGetFilterPos err=0 currentPosition=0 16:41:35 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:35 Filter is already there-color wheel unchanged 16:41:35 Received message from Master: op=Shutter serial=280682 16:41:35 Shutter LASER close 16:41:35 Received message from Camera: op=State serial=280684 16:41:35 GetSingleValue result=40 Value=cccccccc 16:41:35 SkyScan query 16:41:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:41:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:36 Parameters OK 16:41:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:36 Set A/D data flow result=40 16:41:36 Set A/D channel type result=40 16:41:36 Set A/D encoding result=40 16:41:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:36 Set channel filter=0.000000e+000 result=40 16:41:36 Config A/D Result=40 16:41:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:36 Get A/D filter: -9.255963e+061 result=40 16:41:36 Get A/D value=-858993460 result=40 16:41:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:36 Parameters OK 16:41:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:36 Set A/D data flow result=40 16:41:36 Set A/D channel type result=40 16:41:36 Set A/D encoding result=40 16:41:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:36 Set channel filter=0.000000e+000 result=40 16:41:36 Config A/D Result=40 16:41:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:36 Get A/D filter: -9.255963e+061 result=40 16:41:36 Get A/D value=-858993460 result=40 16:41:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:41:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:41:36 Aux= 16:41:36 Message to Camera, serial 280684 queued 16:42:13 Received message from Master: op=PointingHead serial=280697 16:42:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:42:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:42:13 Point started: ret=0 16:42:13 point_skyscan result=0 16:42:14 Check angles 16:42:14 SkyScan query 16:42:15 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.24<-13416 Statuses=0009 0009 16:42:15 Msec=0 True Az=152.655 Ze=-21.24 Az status=0009 Ze status=0009 16:42:15 Check angles 16:42:15 SkyScan query 16:42:15 SkyScan query done: ret=0 az=134.595<-8973 ze=0.105<-11993 Statuses=0009 0009 16:42:15 Msec=750 True Az=134.595 Ze=0.105 Az status=0009 Ze status=0009 16:42:15 Check angles 16:42:15 SkyScan query 16:42:16 SkyScan query done: ret=0 az=117.315<-7821 ze=21.105<-10593 Statuses=0009 0009 16:42:16 Msec=1500 True Az=117.315 Ze=21.105 Az status=0009 Ze status=0009 16:42:16 Check angles 16:42:16 SkyScan query 16:42:17 SkyScan query done: ret=0 az=99.795<-6653 ze=42.015<-9199 Statuses=0009 0009 16:42:17 Msec=2250 True Az=99.795 Ze=42.015 Az status=0009 Ze status=0009 16:42:17 Check angles 16:42:17 SkyScan query 16:42:18 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 16:42:18 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 16:42:18 Check angles 16:42:18 SkyScan query 16:42:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:42:18 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 16:42:18 Message to Master queued w/err=0: serial=280697 error=0 16:42:23 Received message from Master: op=Filter serial=280698 16:42:23 Color wheel filter change from 0 to 0 16:42:23 FLIGetFilterPos err=0 currentPosition=0 16:42:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:42:23 Filter is already there-color wheel unchanged 16:42:23 Received message from Master: op=Shutter serial=280699 16:42:23 Shutter LASER close 16:42:24 Received message from Camera: op=State serial=280701 16:42:24 GetSingleValue result=40 Value=cccccccc 16:42:24 SkyScan query 16:42:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:42:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:24 Parameters OK 16:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:24 Set A/D data flow result=40 16:42:24 Set A/D channel type result=40 16:42:24 Set A/D encoding result=40 16:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:24 Set channel filter=0.000000e+000 result=40 16:42:24 Config A/D Result=40 16:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:24 Get A/D filter: -9.255963e+061 result=40 16:42:24 Get A/D value=-858993460 result=40 16:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:24 Parameters OK 16:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:24 Set A/D data flow result=40 16:42:24 Set A/D channel type result=40 16:42:24 Set A/D encoding result=40 16:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:24 Set channel filter=0.000000e+000 result=40 16:42:24 Config A/D Result=40 16:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:24 Get A/D filter: -9.255963e+061 result=40 16:42:24 Get A/D value=-858993460 result=40 16:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:42:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:42:24 Aux= 16:42:24 Message to Camera, serial 280701 queued 16:43:01 Received message from Master: op=PointingHead serial=280714 16:43:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:43:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:43:01 Point started: ret=0 16:43:01 point_skyscan result=0 16:43:02 Check angles 16:43:02 SkyScan query 16:43:03 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 16:43:03 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 16:43:03 Check angles 16:43:03 SkyScan query 16:43:03 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 16:43:03 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 16:43:04 Check angles 16:43:04 SkyScan query 16:43:04 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 16:43:04 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 16:43:04 Check angles 16:43:04 SkyScan query 16:43:05 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 16:43:05 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 16:43:05 Check angles 16:43:05 SkyScan query 16:43:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:43:06 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:43:06 Check angles 16:43:06 SkyScan query 16:43:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:43:06 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:43:06 Message to Master queued w/err=0: serial=280714 error=0 16:43:11 Received message from Master: op=Filter serial=280715 16:43:11 Color wheel filter change from 0 to 0 16:43:11 FLIGetFilterPos err=0 currentPosition=0 16:43:11 FLIGetStepsRemaining err=0 RemainingSteps=0 16:43:11 Filter is already there-color wheel unchanged 16:43:12 Received message from Master: op=Shutter serial=280716 16:43:12 Shutter LASER close 16:43:12 Received message from Camera: op=State serial=280718 16:43:12 GetSingleValue result=40 Value=cccccccc 16:43:12 SkyScan query 16:43:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:43:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:12 Parameters OK 16:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:12 Set A/D data flow result=40 16:43:12 Set A/D channel type result=40 16:43:12 Set A/D encoding result=40 16:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:12 Set channel filter=0.000000e+000 result=40 16:43:12 Config A/D Result=40 16:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:12 Get A/D filter: -9.255963e+061 result=40 16:43:12 Get A/D value=-858993460 result=40 16:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:12 Parameters OK 16:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:12 Set A/D data flow result=40 16:43:12 Set A/D channel type result=40 16:43:12 Set A/D encoding result=40 16:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:12 Set channel filter=0.000000e+000 result=40 16:43:12 Config A/D Result=40 16:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:12 Get A/D filter: -9.255963e+061 result=40 16:43:12 Get A/D value=-858993460 result=40 16:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:43:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:43:12 Aux= 16:43:12 Message to Camera, serial 280718 queued 16:43:49 Received message from Master: op=PointingHead serial=280731 16:43:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:43:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:43:49 Point started: ret=0 16:43:49 point_skyscan result=0 16:43:50 Check angles 16:43:50 SkyScan query 16:43:51 SkyScan query done: ret=0 az=152.64<-10176 ze=8.145<-11457 Statuses=0009 0009 16:43:51 Msec=0 True Az=152.64 Ze=8.145 Az status=0009 Ze status=0009 16:43:51 Check angles 16:43:51 SkyScan query 16:43:52 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.735<-12849 Statuses=0009 0009 16:43:52 Msec=750 True Az=135.09 Ze=-12.735 Az status=0009 Ze status=0009 16:43:52 Check angles 16:43:52 SkyScan query 16:43:52 SkyScan query done: ret=0 az=117.63<-7842 ze=-33.765<-14251 Statuses=0009 0009 16:43:52 Msec=1500 True Az=117.63 Ze=-33.765 Az status=0009 Ze status=0009 16:43:52 Check angles 16:43:52 SkyScan query 16:43:53 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 16:43:53 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 16:43:53 Check angles 16:43:53 SkyScan query 16:43:54 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:43:54 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:43:54 Check angles 16:43:54 SkyScan query 16:43:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:43:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:43:55 Message to Master queued w/err=0: serial=280731 error=0 16:44:00 Received message from Master: op=Filter serial=280732 16:44:00 Color wheel filter change from 0 to 0 16:44:00 FLIGetFilterPos err=0 currentPosition=0 16:44:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:44:00 Filter is already there-color wheel unchanged 16:44:00 Received message from Master: op=Shutter serial=280733 16:44:00 Shutter LASER close 16:44:00 Received message from Camera: op=State serial=280735 16:44:00 GetSingleValue result=40 Value=cccccccc 16:44:00 SkyScan query 16:44:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:44:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:00 Parameters OK 16:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:00 Set A/D data flow result=40 16:44:00 Set A/D channel type result=40 16:44:00 Set A/D encoding result=40 16:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:00 Set channel filter=0.000000e+000 result=40 16:44:00 Config A/D Result=40 16:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:00 Get A/D filter: -9.255963e+061 result=40 16:44:00 Get A/D value=-858993460 result=40 16:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:00 Parameters OK 16:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:00 Set A/D data flow result=40 16:44:00 Set A/D channel type result=40 16:44:00 Set A/D encoding result=40 16:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:00 Set channel filter=0.000000e+000 result=40 16:44:00 Config A/D Result=40 16:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:00 Get A/D filter: -9.255963e+061 result=40 16:44:00 Get A/D value=-858993460 result=40 16:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:44:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:44:00 Aux= 16:44:00 Message to Camera, serial 280735 queued 16:44:37 Received message from Master: op=PointingHead serial=280748 16:44:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:44:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:44:38 Point started: ret=0 16:44:38 point_skyscan result=0 16:44:38 Check angles 16:44:38 SkyScan query 16:44:39 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.075<-17405 Statuses=0009 0009 16:44:39 Msec=0 True Az=108.825 Ze=-81.075 Az status=0009 Ze status=0009 16:44:39 Check angles 16:44:39 SkyScan query 16:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.06<-18804 Statuses=0008 0009 16:44:40 Msec=750 True Az=112.995 Ze=-102.06 Az status=0008 Ze status=0009 16:44:40 Check angles 16:44:40 SkyScan query 16:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 16:44:40 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 16:44:41 Check angles 16:44:41 SkyScan query 16:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.97<-21598 Statuses=0008 0009 16:44:41 Msec=2250 True Az=112.995 Ze=-143.97 Az status=0008 Ze status=0009 16:44:41 Check angles 16:44:41 SkyScan query 16:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.895<-22993 Statuses=0008 0009 16:44:42 Msec=3000 True Az=112.995 Ze=-164.895 Az status=0008 Ze status=0009 16:44:42 Check angles 16:44:42 SkyScan query 16:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:44:43 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:44:43 Message to Master queued w/err=0: serial=280748 error=0 16:44:48 Received message from Master: op=Filter serial=280749 16:44:48 Color wheel filter change from 0 to 0 16:44:48 FLIGetFilterPos err=0 currentPosition=0 16:44:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:44:48 Filter is already there-color wheel unchanged 16:44:48 Received message from Master: op=Shutter serial=280750 16:44:48 Shutter LASER open 16:44:48 Received message from Camera: op=State serial=280752 16:44:48 GetSingleValue result=40 Value=cccccccc 16:44:48 SkyScan query 16:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:44:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:49 Parameters OK 16:44:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:49 Set A/D data flow result=40 16:44:49 Set A/D channel type result=40 16:44:49 Set A/D encoding result=40 16:44:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:49 Set channel filter=0.000000e+000 result=40 16:44:49 Config A/D Result=40 16:44:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:49 Get A/D filter: -9.255963e+061 result=40 16:44:49 Get A/D value=-858993460 result=40 16:44:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:49 Parameters OK 16:44:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:49 Set A/D data flow result=40 16:44:49 Set A/D channel type result=40 16:44:49 Set A/D encoding result=40 16:44:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:49 Set channel filter=0.000000e+000 result=40 16:44:49 Config A/D Result=40 16:44:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:49 Get A/D filter: -9.255963e+061 result=40 16:44:49 Get A/D value=-858993460 result=40 16:44:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:44:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:44:49 Aux= 16:44:49 Message to Camera, serial 280752 queued 16:44:57 Received message from Master: op=Shutter serial=280762 16:44:57 Shutter LASER close 16:44:57 Received message from Master: op=PointingHead serial=280766 16:44:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:44:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:44:58 Point started: ret=0 16:44:58 point_skyscan result=0 16:44:58 Check angles 16:44:58 SkyScan query 16:44:59 SkyScan query done: ret=0 az=90.015<-6001 ze=157.38<-1508 Statuses=0009 0009 16:44:59 Msec=0 True Az=90.015 Ze=157.38 Az status=0009 Ze status=0009 16:44:59 Check angles 16:44:59 SkyScan query 16:45:00 SkyScan query done: ret=0 az=72.54<-4836 ze=136.395<-2907 Statuses=0009 0009 16:45:00 Msec=750 True Az=72.54 Ze=136.395 Az status=0009 Ze status=0009 16:45:00 Check angles 16:45:00 SkyScan query 16:45:01 SkyScan query done: ret=0 az=55.08<-3672 ze=115.485<-4301 Statuses=0009 0009 16:45:01 Msec=1500 True Az=55.08 Ze=115.485 Az status=0009 Ze status=0009 16:45:01 Check angles 16:45:01 SkyScan query 16:45:01 SkyScan query done: ret=0 az=41.01<-2734 ze=94.47<-5702 Statuses=0009 0009 16:45:01 Msec=2250 True Az=41.01 Ze=94.47 Az status=0009 Ze status=0009 16:45:01 Check angles 16:45:01 SkyScan query 16:45:02 SkyScan query done: ret=0 az=40.995<-2733 ze=73.08<-7128 Statuses=0008 0009 16:45:02 Msec=3000 True Az=40.995 Ze=73.08 Az status=0008 Ze status=0009 16:45:02 Check angles 16:45:02 SkyScan query 16:45:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 16:45:03 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 16:45:03 Check angles 16:45:03 SkyScan query 16:45:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:45:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:45:04 Message to Master queued w/err=0: serial=280766 error=0 16:45:09 Received message from Master: op=Filter serial=280767 16:45:09 Color wheel filter change from 0 to 0 16:45:09 FLIGetFilterPos err=0 currentPosition=0 16:45:09 FLIGetStepsRemaining err=0 RemainingSteps=0 16:45:09 Filter is already there-color wheel unchanged 16:45:09 Received message from Master: op=Shutter serial=280768 16:45:09 Shutter LASER close 16:45:09 Received message from Camera: op=State serial=280770 16:45:09 GetSingleValue result=40 Value=cccccccc 16:45:09 SkyScan query 16:45:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:45:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:10 Parameters OK 16:45:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:10 Set A/D data flow result=40 16:45:10 Set A/D channel type result=40 16:45:10 Set A/D encoding result=40 16:45:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:10 Set channel filter=0.000000e+000 result=40 16:45:10 Config A/D Result=40 16:45:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:10 Get A/D filter: -9.255963e+061 result=40 16:45:10 Get A/D value=-858993460 result=40 16:45:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:10 Parameters OK 16:45:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:10 Set A/D data flow result=40 16:45:10 Set A/D channel type result=40 16:45:10 Set A/D encoding result=40 16:45:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:10 Set channel filter=0.000000e+000 result=40 16:45:10 Config A/D Result=40 16:45:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:10 Get A/D filter: -9.255963e+061 result=40 16:45:10 Get A/D value=-858993460 result=40 16:45:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:10 Aux= [UTC 2018-12-19 16:45:10] 16:45:10 Message to Camera, serial 280770 queued 16:45:27 Received message from Master: op=Identify serial=280771 16:45:46 Received message from Master: op=PointingHead serial=280786 16:45:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:45:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:45:47 Point started: ret=0 16:45:47 point_skyscan result=0 16:45:47 Check angles 16:45:47 SkyScan query 16:45:48 SkyScan query done: ret=0 az=63.885<-4259 ze=66.54<-7564 Statuses=0009 0008 16:45:48 Msec=0 True Az=63.885 Ze=66.54 Az status=0009 Ze status=0008 16:45:48 Check angles 16:45:48 SkyScan query 16:45:49 SkyScan query done: ret=0 az=81.33<-5422 ze=66.51<-7566 Statuses=0009 0008 16:45:49 Msec=750 True Az=81.33 Ze=66.51 Az status=0009 Ze status=0008 16:45:49 Check angles 16:45:49 SkyScan query 16:45:50 SkyScan query done: ret=0 az=98.805<-6587 ze=66.495<-7567 Statuses=0009 0008 16:45:50 Msec=1500 True Az=98.805 Ze=66.495 Az status=0009 Ze status=0008 16:45:50 Check angles 16:45:50 SkyScan query 16:45:50 SkyScan query done: ret=0 az=116.265<-7751 ze=66.495<-7567 Statuses=0009 0008 16:45:50 Msec=2250 True Az=116.265 Ze=66.495 Az status=0009 Ze status=0008 16:45:50 Check angles 16:45:50 SkyScan query 16:45:51 SkyScan query done: ret=0 az=133.68<-8912 ze=66.495<-7567 Statuses=0009 0008 16:45:51 Msec=3000 True Az=133.68 Ze=66.495 Az status=0009 Ze status=0008 16:45:51 Check angles 16:45:51 SkyScan query 16:45:52 SkyScan query done: ret=0 az=151.14<-10076 ze=66.495<-7567 Statuses=0009 0008 16:45:52 Msec=3750 True Az=151.14 Ze=66.495 Az status=0009 Ze status=0008 16:45:52 Check angles 16:45:52 SkyScan query 16:45:53 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:45:53 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:45:53 Message to Master queued w/err=0: serial=280786 error=0 16:45:58 Received message from Master: op=Filter serial=280787 16:45:58 Color wheel filter change from 0 to 0 16:45:58 FLIGetFilterPos err=0 currentPosition=0 16:45:58 FLIGetStepsRemaining err=0 RemainingSteps=0 16:45:58 Filter is already there-color wheel unchanged 16:45:58 Received message from Master: op=Shutter serial=280788 16:45:58 Shutter LASER close 16:45:58 Received message from Camera: op=State serial=280790 16:45:58 GetSingleValue result=40 Value=cccccccc 16:45:58 SkyScan query 16:45:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:45:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:58 Parameters OK 16:45:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:58 Set A/D data flow result=40 16:45:58 Set A/D channel type result=40 16:45:58 Set A/D encoding result=40 16:45:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:58 Set channel filter=0.000000e+000 result=40 16:45:58 Config A/D Result=40 16:45:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:58 Get A/D filter: -9.255963e+061 result=40 16:45:58 Get A/D value=-858993460 result=40 16:45:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:58 Parameters OK 16:45:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:58 Set A/D data flow result=40 16:45:58 Set A/D channel type result=40 16:45:58 Set A/D encoding result=40 16:45:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:58 Set channel filter=0.000000e+000 result=40 16:45:58 Config A/D Result=40 16:45:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:58 Get A/D filter: -9.255963e+061 result=40 16:45:58 Get A/D value=-858993460 result=40 16:45:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:58 Aux= 16:45:58 Message to Camera, serial 280790 queued 16:46:35 Received message from Master: op=PointingHead serial=280803 16:46:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:46:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:46:35 Point started: ret=0 16:46:35 point_skyscan result=0 16:46:36 Check angles 16:46:36 SkyScan query 16:46:37 SkyScan query done: ret=0 az=134.805<-8987 ze=36.645<-9557 Statuses=0009 0009 16:46:37 Msec=0 True Az=134.805 Ze=36.645 Az status=0009 Ze status=0009 16:46:37 Check angles 16:46:37 SkyScan query 16:46:38 SkyScan query done: ret=0 az=117.09<-7806 ze=15.285<-10981 Statuses=0009 0009 16:46:38 Msec=750 True Az=117.09 Ze=15.285 Az status=0009 Ze status=0009 16:46:38 Check angles 16:46:38 SkyScan query 16:46:38 SkyScan query done: ret=0 az=99.15<-6610 ze=-6.21<-12414 Statuses=0009 0009 16:46:38 Msec=1500 True Az=99.15 Ze=-6.21 Az status=0009 Ze status=0009 16:46:39 Check angles 16:46:39 SkyScan query 16:46:39 SkyScan query done: ret=0 az=81.78<-5452 ze=-27.15<-13810 Statuses=0009 0009 16:46:39 Msec=2250 True Az=81.78 Ze=-27.15 Az status=0009 Ze status=0009 16:46:39 Check angles 16:46:39 SkyScan query 16:46:40 SkyScan query done: ret=0 az=64.215<-4281 ze=-38.58<-14572 Statuses=0009 0008 16:46:40 Msec=3000 True Az=64.215 Ze=-38.58 Az status=0009 Ze status=0008 16:46:40 Check angles 16:46:40 SkyScan query 16:46:41 SkyScan query done: ret=0 az=46.86<-3124 ze=-38.52<-14568 Statuses=0009 0008 16:46:41 Msec=3750 True Az=46.86 Ze=-38.52 Az status=0009 Ze status=0008 16:46:41 Check angles 16:46:41 SkyScan query 16:46:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:46:41 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:46:41 Message to Master queued w/err=0: serial=280803 error=0 16:46:46 Received message from Master: op=Filter serial=280804 16:46:46 Color wheel filter change from 0 to 0 16:46:46 FLIGetFilterPos err=0 currentPosition=0 16:46:46 FLIGetStepsRemaining err=0 RemainingSteps=0 16:46:46 Filter is already there-color wheel unchanged 16:46:47 Received message from Master: op=Shutter serial=280805 16:46:47 Shutter LASER close 16:46:47 Received message from Camera: op=State serial=280807 16:46:47 GetSingleValue result=40 Value=cccccccc 16:46:47 SkyScan query 16:46:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:46:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:47 Parameters OK 16:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:47 Set A/D data flow result=40 16:46:47 Set A/D channel type result=40 16:46:47 Set A/D encoding result=40 16:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:47 Set channel filter=0.000000e+000 result=40 16:46:47 Config A/D Result=40 16:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:47 Get A/D filter: -9.255963e+061 result=40 16:46:47 Get A/D value=-858993460 result=40 16:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:47 Parameters OK 16:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:47 Set A/D data flow result=40 16:46:47 Set A/D channel type result=40 16:46:47 Set A/D encoding result=40 16:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:47 Set channel filter=0.000000e+000 result=40 16:46:47 Config A/D Result=40 16:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:47 Get A/D filter: -9.255963e+061 result=40 16:46:47 Get A/D value=-858993460 result=40 16:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:46:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:46:47 Aux= 16:46:47 Message to Camera, serial 280807 queued 16:47:24 Received message from Master: op=PointingHead serial=280820 16:47:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:47:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:47:24 Point started: ret=0 16:47:24 point_skyscan result=0 16:47:25 Check angles 16:47:25 SkyScan query 16:47:26 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.04<-16536 Statuses=0009 0009 16:47:26 Msec=0 True Az=63.795 Ze=-68.04 Az status=0009 Ze status=0009 16:47:26 Check angles 16:47:26 SkyScan query 16:47:26 SkyScan query done: ret=0 az=81.12<-5408 ze=-88.995<-17933 Statuses=0009 0009 16:47:26 Msec=750 True Az=81.12 Ze=-88.995 Az status=0009 Ze status=0009 16:47:27 Check angles 16:47:27 SkyScan query 16:47:27 SkyScan query done: ret=0 az=98.67<-6578 ze=-109.92<-19328 Statuses=0009 0009 16:47:27 Msec=1500 True Az=98.67 Ze=-109.92 Az status=0009 Ze status=0009 16:47:27 Check angles 16:47:27 SkyScan query 16:47:28 SkyScan query done: ret=0 az=116.1<-7740 ze=-130.905<-20727 Statuses=0009 0009 16:47:28 Msec=2250 True Az=116.1 Ze=-130.905 Az status=0009 Ze status=0009 16:47:28 Check angles 16:47:28 SkyScan query 16:47:29 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 16:47:29 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 16:47:29 Check angles 16:47:29 SkyScan query 16:47:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 16:47:29 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 16:47:29 Message to Master queued w/err=0: serial=280820 error=0 16:47:34 Received message from Master: op=Filter serial=280821 16:47:34 Color wheel filter change from 0 to 0 16:47:34 FLIGetFilterPos err=0 currentPosition=0 16:47:34 FLIGetStepsRemaining err=0 RemainingSteps=0 16:47:34 Filter is already there-color wheel unchanged 16:47:35 Received message from Master: op=Shutter serial=280822 16:47:35 Shutter LASER close 16:47:35 Received message from Camera: op=State serial=280824 16:47:35 GetSingleValue result=40 Value=cccccccc 16:47:35 SkyScan query 16:47:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:47:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:35 Parameters OK 16:47:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:35 Set A/D data flow result=40 16:47:35 Set A/D channel type result=40 16:47:35 Set A/D encoding result=40 16:47:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:35 Set channel filter=0.000000e+000 result=40 16:47:35 Config A/D Result=40 16:47:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:35 Get A/D filter: -9.255963e+061 result=40 16:47:35 Get A/D value=-858993460 result=40 16:47:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:35 Parameters OK 16:47:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:35 Set A/D data flow result=40 16:47:35 Set A/D channel type result=40 16:47:35 Set A/D encoding result=40 16:47:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:35 Set channel filter=0.000000e+000 result=40 16:47:35 Config A/D Result=40 16:47:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:35 Get A/D filter: -9.255963e+061 result=40 16:47:35 Get A/D value=-858993460 result=40 16:47:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:47:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:47:35 Aux= 16:47:35 Message to Camera, serial 280824 queued 16:48:11 Received message from Master: op=PointingHead serial=280836 16:48:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:48:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:48:11 Point started: ret=0 16:48:11 point_skyscan result=0 16:48:12 Check angles 16:48:12 SkyScan query 16:48:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 16:48:13 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 16:48:13 Check angles 16:48:13 SkyScan query 16:48:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:48:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:48:14 Message to Master queued w/err=0: serial=280836 error=0 16:48:19 Received message from Master: op=Filter serial=280837 16:48:19 Color wheel filter change from 0 to 0 16:48:19 FLIGetFilterPos err=0 currentPosition=0 16:48:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:19 Filter is already there-color wheel unchanged 16:48:19 Received message from Master: op=Shutter serial=280838 16:48:19 Shutter LASER open 16:48:19 Received message from Camera: op=State serial=280840 16:48:19 GetSingleValue result=40 Value=cccccccc 16:48:19 SkyScan query 16:48:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:48:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:19 Parameters OK 16:48:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:19 Set A/D data flow result=40 16:48:19 Set A/D channel type result=40 16:48:19 Set A/D encoding result=40 16:48:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:19 Set channel filter=0.000000e+000 result=40 16:48:19 Config A/D Result=40 16:48:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:19 Get A/D filter: -9.255963e+061 result=40 16:48:19 Get A/D value=-858993460 result=40 16:48:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:19 Parameters OK 16:48:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:19 Set A/D data flow result=40 16:48:19 Set A/D channel type result=40 16:48:19 Set A/D encoding result=40 16:48:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:19 Set channel filter=0.000000e+000 result=40 16:48:19 Config A/D Result=40 16:48:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:19 Get A/D filter: -9.255963e+061 result=40 16:48:19 Get A/D value=-858993460 result=40 16:48:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:19 Aux= 16:48:19 Message to Camera, serial 280840 queued 16:48:28 Received message from Master: op=Shutter serial=280850 16:48:28 Shutter LASER close 16:48:28 Received message from Master: op=PointingHead serial=280854 16:48:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:48:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:48:29 Point started: ret=0 16:48:29 point_skyscan result=0 16:48:30 Check angles 16:48:30 SkyScan query 16:48:30 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.175<-21545 Statuses=0009 0009 16:48:30 Msec=0 True Az=136.11 Ze=-143.175 Az status=0009 Ze status=0009 16:48:30 Check angles 16:48:30 SkyScan query 16:48:31 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.175<-20145 Statuses=0009 0009 16:48:31 Msec=750 True Az=153.495 Ze=-122.175 Az status=0009 Ze status=0009 16:48:31 Check angles 16:48:31 SkyScan query 16:48:32 SkyScan query done: ret=0 az=171.345<-11423 ze=-100.755<-18717 Statuses=0009 0009 16:48:32 Msec=1500 True Az=171.345 Ze=-100.755 Az status=0009 Ze status=0009 16:48:32 Check angles 16:48:32 SkyScan query 16:48:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.905<-17327 Statuses=0008 0009 16:48:32 Msec=2250 True Az=176.01 Ze=-79.905 Az status=0008 Ze status=0009 16:48:33 Check angles 16:48:33 SkyScan query 16:48:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.875<-15925 Statuses=0008 0009 16:48:33 Msec=3000 True Az=175.995 Ze=-58.875 Az status=0008 Ze status=0009 16:48:33 Check angles 16:48:33 SkyScan query 16:48:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:48:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:48:34 Message to Master queued w/err=0: serial=280854 error=0 16:48:39 Received message from Master: op=Filter serial=280855 16:48:39 Color wheel filter change from 0 to 0 16:48:39 FLIGetFilterPos err=0 currentPosition=0 16:48:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:39 Filter is already there-color wheel unchanged 16:48:39 Received message from Master: op=Shutter serial=280856 16:48:39 Shutter LASER close 16:48:39 Received message from Camera: op=State serial=280858 16:48:39 GetSingleValue result=40 Value=cccccccc 16:48:39 SkyScan query 16:48:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:48:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:40 Parameters OK 16:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:40 Set A/D data flow result=40 16:48:40 Set A/D channel type result=40 16:48:40 Set A/D encoding result=40 16:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:40 Set channel filter=0.000000e+000 result=40 16:48:40 Config A/D Result=40 16:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:40 Get A/D filter: -9.255963e+061 result=40 16:48:40 Get A/D value=-858993460 result=40 16:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:40 Parameters OK 16:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:40 Set A/D data flow result=40 16:48:40 Set A/D channel type result=40 16:48:40 Set A/D encoding result=40 16:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:40 Set channel filter=0.000000e+000 result=40 16:48:40 Config A/D Result=40 16:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:40 Get A/D filter: -9.255963e+061 result=40 16:48:40 Get A/D value=-858993460 result=40 16:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:40 Aux= 16:48:40 Message to Camera, serial 280858 queued 16:49:17 Received message from Master: op=PointingHead serial=280871 16:49:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:49:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:49:17 Point started: ret=0 16:49:17 point_skyscan result=0 16:49:18 Check angles 16:49:18 SkyScan query 16:49:18 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.585<-13439 Statuses=0009 0009 16:49:18 Msec=0 True Az=152.925 Ze=-21.585 Az status=0009 Ze status=0009 16:49:18 Check angles 16:49:18 SkyScan query 16:49:19 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.615<-12041 Statuses=0009 0009 16:49:19 Msec=750 True Az=135.42 Ze=-0.615 Az status=0009 Ze status=0009 16:49:19 Check angles 16:49:19 SkyScan query 16:49:20 SkyScan query done: ret=0 az=117.87<-7858 ze=20.31<-10646 Statuses=0009 0009 16:49:20 Msec=1500 True Az=117.87 Ze=20.31 Az status=0009 Ze status=0009 16:49:20 Check angles 16:49:20 SkyScan query 16:49:21 SkyScan query done: ret=0 az=100.545<-6703 ze=41.31<-9246 Statuses=0009 0009 16:49:21 Msec=2250 True Az=100.545 Ze=41.31 Az status=0009 Ze status=0009 16:49:21 Check angles 16:49:21 SkyScan query 16:49:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 16:49:21 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 16:49:21 Check angles 16:49:21 SkyScan query 16:49:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:49:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:49:22 Message to Master queued w/err=0: serial=280871 error=0 16:49:27 Received message from Master: op=Filter serial=280872 16:49:27 Color wheel filter change from 0 to 0 16:49:27 FLIGetFilterPos err=0 currentPosition=0 16:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:49:27 Filter is already there-color wheel unchanged 16:49:27 Received message from Master: op=Shutter serial=280873 16:49:27 Shutter LASER close 16:49:27 Received message from Camera: op=State serial=280875 16:49:27 GetSingleValue result=40 Value=cccccccc 16:49:27 SkyScan query 16:49:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:28 Parameters OK 16:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:28 Set A/D data flow result=40 16:49:28 Set A/D channel type result=40 16:49:28 Set A/D encoding result=40 16:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:28 Set channel filter=0.000000e+000 result=40 16:49:28 Config A/D Result=40 16:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:28 Get A/D filter: -9.255963e+061 result=40 16:49:28 Get A/D value=-858993460 result=40 16:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:28 Parameters OK 16:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:28 Set A/D data flow result=40 16:49:28 Set A/D channel type result=40 16:49:28 Set A/D encoding result=40 16:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:28 Set channel filter=0.000000e+000 result=40 16:49:28 Config A/D Result=40 16:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:28 Get A/D filter: -9.255963e+061 result=40 16:49:28 Get A/D value=-858993460 result=40 16:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:49:28 Aux= 16:49:28 Message to Camera, serial 280875 queued 16:50:05 Received message from Master: op=PointingHead serial=280888 16:50:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:50:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:50:05 Point started: ret=0 16:50:05 point_skyscan result=0 16:50:06 Check angles 16:50:06 SkyScan query 16:50:06 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 16:50:06 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 16:50:07 Check angles 16:50:07 SkyScan query 16:50:07 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 16:50:07 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 16:50:07 Check angles 16:50:07 SkyScan query 16:50:08 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 16:50:08 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 16:50:08 Check angles 16:50:08 SkyScan query 16:50:09 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 16:50:09 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 16:50:09 Check angles 16:50:09 SkyScan query 16:50:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:50:09 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:50:10 Check angles 16:50:10 SkyScan query 16:50:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:50:10 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:50:10 Message to Master queued w/err=0: serial=280888 error=0 16:50:15 Received message from Master: op=Filter serial=280889 16:50:15 Color wheel filter change from 0 to 0 16:50:15 FLIGetFilterPos err=0 currentPosition=0 16:50:15 FLIGetStepsRemaining err=0 RemainingSteps=0 16:50:15 Filter is already there-color wheel unchanged 16:50:15 Received message from Master: op=Shutter serial=280890 16:50:15 Shutter LASER close 16:50:15 Received message from Camera: op=State serial=280892 16:50:15 GetSingleValue result=40 Value=cccccccc 16:50:15 SkyScan query 16:50:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:50:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:16 Parameters OK 16:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:16 Set A/D data flow result=40 16:50:16 Set A/D channel type result=40 16:50:16 Set A/D encoding result=40 16:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:16 Set channel filter=0.000000e+000 result=40 16:50:16 Config A/D Result=40 16:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:16 Get A/D filter: -9.255963e+061 result=40 16:50:16 Get A/D value=-858993460 result=40 16:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:16 Parameters OK 16:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:16 Set A/D data flow result=40 16:50:16 Set A/D channel type result=40 16:50:16 Set A/D encoding result=40 16:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:16 Set channel filter=0.000000e+000 result=40 16:50:16 Config A/D Result=40 16:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:16 Get A/D filter: -9.255963e+061 result=40 16:50:16 Get A/D value=-858993460 result=40 16:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:50:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:50:16 Aux= 16:50:16 Message to Camera, serial 280892 queued 16:50:53 Received message from Master: op=PointingHead serial=280905 16:50:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:50:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:50:53 Point started: ret=0 16:50:53 point_skyscan result=0 16:50:54 Check angles 16:50:54 SkyScan query 16:50:54 SkyScan query done: ret=0 az=152.895<-10193 ze=8.7<-11420 Statuses=0009 0009 16:50:54 Msec=0 True Az=152.895 Ze=8.7 Az status=0009 Ze status=0009 16:50:55 Check angles 16:50:55 SkyScan query 16:50:55 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.27<-12818 Statuses=0009 0009 16:50:55 Msec=750 True Az=135.405 Ze=-12.27 Az status=0009 Ze status=0009 16:50:55 Check angles 16:50:55 SkyScan query 16:50:56 SkyScan query done: ret=0 az=117.63<-7842 ze=-33.69<-14246 Statuses=0009 0009 16:50:56 Msec=1500 True Az=117.63 Ze=-33.69 Az status=0009 Ze status=0009 16:50:56 Check angles 16:50:56 SkyScan query 16:50:57 SkyScan query done: ret=0 az=99.825<-6655 ze=-51.57<-15438 Statuses=0009 0009 16:50:57 Msec=2250 True Az=99.825 Ze=-51.57 Az status=0009 Ze status=0009 16:50:57 Check angles 16:50:57 SkyScan query 16:50:57 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:50:57 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:50:58 Check angles 16:50:58 SkyScan query 16:50:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:50:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:50:58 Message to Master queued w/err=0: serial=280905 error=0 16:51:03 Received message from Master: op=Filter serial=280906 16:51:03 Color wheel filter change from 0 to 0 16:51:03 FLIGetFilterPos err=0 currentPosition=0 16:51:03 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:03 Filter is already there-color wheel unchanged 16:51:03 Received message from Master: op=Shutter serial=280907 16:51:03 Shutter LASER close 16:51:03 Received message from Camera: op=State serial=280909 16:51:03 GetSingleValue result=40 Value=cccccccc 16:51:03 SkyScan query 16:51:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:51:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:04 Parameters OK 16:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:04 Set A/D data flow result=40 16:51:04 Set A/D channel type result=40 16:51:04 Set A/D encoding result=40 16:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:04 Set channel filter=0.000000e+000 result=40 16:51:04 Config A/D Result=40 16:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:04 Get A/D filter: -9.255963e+061 result=40 16:51:04 Get A/D value=-858993460 result=40 16:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:04 Parameters OK 16:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:04 Set A/D data flow result=40 16:51:04 Set A/D channel type result=40 16:51:04 Set A/D encoding result=40 16:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:04 Set channel filter=0.000000e+000 result=40 16:51:04 Config A/D Result=40 16:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:04 Get A/D filter: -9.255963e+061 result=40 16:51:04 Get A/D value=-858993460 result=40 16:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:51:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:51:04 Aux= 16:51:04 Message to Camera, serial 280909 queued 16:51:41 Received message from Master: op=PointingHead serial=280922 16:51:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:51:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:51:41 Point started: ret=0 16:51:41 point_skyscan result=0 16:51:42 Check angles 16:51:42 SkyScan query 16:51:43 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.21<-17414 Statuses=0009 0009 16:51:43 Msec=0 True Az=108.96 Ze=-81.21 Az status=0009 Ze status=0009 16:51:43 Check angles 16:51:43 SkyScan query 16:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 16:51:43 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 16:51:43 Check angles 16:51:43 SkyScan query 16:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.12<-20208 Statuses=0008 0009 16:51:44 Msec=1500 True Az=112.995 Ze=-123.12 Az status=0008 Ze status=0009 16:51:44 Check angles 16:51:44 SkyScan query 16:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.09<-21606 Statuses=0008 0009 16:51:45 Msec=2250 True Az=112.995 Ze=-144.09 Az status=0008 Ze status=0009 16:51:45 Check angles 16:51:45 SkyScan query 16:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.03<-23002 Statuses=0008 0009 16:51:46 Msec=3000 True Az=112.995 Ze=-165.03 Az status=0008 Ze status=0009 16:51:46 Check angles 16:51:46 SkyScan query 16:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:51:46 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:51:46 Message to Master queued w/err=0: serial=280922 error=0 16:51:51 Received message from Master: op=Filter serial=280923 16:51:51 Color wheel filter change from 0 to 0 16:51:51 FLIGetFilterPos err=0 currentPosition=0 16:51:51 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:51 Filter is already there-color wheel unchanged 16:51:51 Received message from Master: op=Shutter serial=280924 16:51:51 Shutter LASER open 16:51:52 Received message from Camera: op=State serial=280926 16:51:52 GetSingleValue result=40 Value=cccccccc 16:51:52 SkyScan query 16:51:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:51:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:52 Parameters OK 16:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:52 Set A/D data flow result=40 16:51:52 Set A/D channel type result=40 16:51:52 Set A/D encoding result=40 16:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:52 Set channel filter=0.000000e+000 result=40 16:51:52 Config A/D Result=40 16:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:52 Get A/D filter: -9.255963e+061 result=40 16:51:52 Get A/D value=-858993460 result=40 16:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:52 Parameters OK 16:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:52 Set A/D data flow result=40 16:51:52 Set A/D channel type result=40 16:51:52 Set A/D encoding result=40 16:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:52 Set channel filter=0.000000e+000 result=40 16:51:52 Config A/D Result=40 16:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:52 Get A/D filter: -9.255963e+061 result=40 16:51:52 Get A/D value=-858993460 result=40 16:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:51:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:51:52 Aux= 16:51:52 Message to Camera, serial 280926 queued 16:52:01 Received message from Master: op=Shutter serial=280936 16:52:01 Shutter LASER close 16:52:01 Received message from Master: op=PointingHead serial=280940 16:52:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:52:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:52:01 Point started: ret=0 16:52:01 point_skyscan result=0 16:52:02 Check angles 16:52:02 SkyScan query 16:52:03 SkyScan query done: ret=0 az=89.805<-5987 ze=157.035<-1531 Statuses=0009 0009 16:52:03 Msec=0 True Az=89.805 Ze=157.035 Az status=0009 Ze status=0009 16:52:03 Check angles 16:52:03 SkyScan query 16:52:04 SkyScan query done: ret=0 az=71.985<-4799 ze=135.675<-2955 Statuses=0009 0009 16:52:04 Msec=750 True Az=71.985 Ze=135.675 Az status=0009 Ze status=0009 16:52:04 Check angles 16:52:04 SkyScan query 16:52:04 SkyScan query done: ret=0 az=54.54<-3636 ze=114.645<-4357 Statuses=0009 0009 16:52:04 Msec=1500 True Az=54.54 Ze=114.645 Az status=0009 Ze status=0009 16:52:05 Check angles 16:52:05 SkyScan query 16:52:05 SkyScan query done: ret=0 az=40.98<-2732 ze=93.75<-5750 Statuses=0009 0009 16:52:05 Msec=2250 True Az=40.98 Ze=93.75 Az status=0009 Ze status=0009 16:52:05 Check angles 16:52:05 SkyScan query 16:52:06 SkyScan query done: ret=0 az=40.995<-2733 ze=72.735<-7151 Statuses=0008 0009 16:52:06 Msec=3000 True Az=40.995 Ze=72.735 Az status=0008 Ze status=0009 16:52:06 Check angles 16:52:06 SkyScan query 16:52:07 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 16:52:07 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 16:52:07 Check angles 16:52:07 SkyScan query 16:52:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:52:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:52:07 Message to Master queued w/err=0: serial=280940 error=0 16:52:12 Received message from Master: op=Filter serial=280941 16:52:12 Color wheel filter change from 0 to 0 16:52:12 FLIGetFilterPos err=0 currentPosition=0 16:52:12 FLIGetStepsRemaining err=0 RemainingSteps=0 16:52:12 Filter is already there-color wheel unchanged 16:52:13 Received message from Master: op=Shutter serial=280942 16:52:13 Shutter LASER close 16:52:13 Received message from Camera: op=State serial=280944 16:52:13 GetSingleValue result=40 Value=cccccccc 16:52:13 SkyScan query 16:52:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:52:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:13 Parameters OK 16:52:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:13 Set A/D data flow result=40 16:52:13 Set A/D channel type result=40 16:52:13 Set A/D encoding result=40 16:52:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:13 Set channel filter=0.000000e+000 result=40 16:52:13 Config A/D Result=40 16:52:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:13 Get A/D filter: -9.255963e+061 result=40 16:52:13 Get A/D value=-858993460 result=40 16:52:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:13 Parameters OK 16:52:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:13 Set A/D data flow result=40 16:52:13 Set A/D channel type result=40 16:52:13 Set A/D encoding result=40 16:52:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:13 Set channel filter=0.000000e+000 result=40 16:52:13 Config A/D Result=40 16:52:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:13 Get A/D filter: -9.255963e+061 result=40 16:52:13 Get A/D value=-858993460 result=40 16:52:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:52:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:52:13 Aux= 16:52:13 Message to Camera, serial 280944 queued 16:52:50 Received message from Master: op=PointingHead serial=280957 16:52:50 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:52:50 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:52:50 Point started: ret=0 16:52:50 point_skyscan result=0 16:52:51 Check angles 16:52:51 SkyScan query 16:52:52 SkyScan query done: ret=0 az=64.185<-4279 ze=66.54<-7564 Statuses=0009 0008 16:52:52 Msec=0 True Az=64.185 Ze=66.54 Az status=0009 Ze status=0008 16:52:52 Check angles 16:52:52 SkyScan query 16:52:53 SkyScan query done: ret=0 az=81.645<-5443 ze=66.51<-7566 Statuses=0009 0008 16:52:53 Msec=750 True Az=81.645 Ze=66.51 Az status=0009 Ze status=0008 16:52:53 Check angles 16:52:53 SkyScan query 16:52:53 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 16:52:53 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 16:52:53 Check angles 16:52:53 SkyScan query 16:52:54 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 16:52:54 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 16:52:54 Check angles 16:52:54 SkyScan query 16:52:55 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 16:52:55 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 16:52:55 Check angles 16:52:55 SkyScan query 16:52:56 SkyScan query done: ret=0 az=151.8<-10120 ze=66.495<-7567 Statuses=0009 0008 16:52:56 Msec=3750 True Az=151.8 Ze=66.495 Az status=0009 Ze status=0008 16:52:56 Check angles 16:52:56 SkyScan query 16:52:56 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 16:52:56 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 16:52:56 Message to Master queued w/err=0: serial=280957 error=0 16:53:01 Received message from Master: op=Filter serial=280958 16:53:01 Color wheel filter change from 0 to 0 16:53:01 FLIGetFilterPos err=0 currentPosition=0 16:53:01 FLIGetStepsRemaining err=0 RemainingSteps=0 16:53:01 Filter is already there-color wheel unchanged 16:53:01 Received message from Master: op=Shutter serial=280959 16:53:01 Shutter LASER close 16:53:02 Received message from Camera: op=State serial=280961 16:53:02 GetSingleValue result=40 Value=cccccccc 16:53:02 SkyScan query 16:53:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:53:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:02 Parameters OK 16:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:02 Set A/D data flow result=40 16:53:02 Set A/D channel type result=40 16:53:02 Set A/D encoding result=40 16:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:02 Set channel filter=0.000000e+000 result=40 16:53:02 Config A/D Result=40 16:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:02 Get A/D filter: -9.255963e+061 result=40 16:53:02 Get A/D value=-858993460 result=40 16:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:02 Parameters OK 16:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:02 Set A/D data flow result=40 16:53:02 Set A/D channel type result=40 16:53:02 Set A/D encoding result=40 16:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:02 Set channel filter=0.000000e+000 result=40 16:53:02 Config A/D Result=40 16:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:02 Get A/D filter: -9.255963e+061 result=40 16:53:02 Get A/D value=-858993460 result=40 16:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:02 Aux= 16:53:02 Message to Camera, serial 280961 queued 16:53:39 Received message from Master: op=PointingHead serial=280974 16:53:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:53:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:53:39 Point started: ret=0 16:53:39 point_skyscan result=0 16:53:40 Check angles 16:53:40 SkyScan query 16:53:41 SkyScan query done: ret=0 az=134.82<-8988 ze=36.675<-9555 Statuses=0009 0009 16:53:41 Msec=0 True Az=134.82 Ze=36.675 Az status=0009 Ze status=0009 16:53:41 Check angles 16:53:41 SkyScan query 16:53:41 SkyScan query done: ret=0 az=117.345<-7823 ze=15.72<-10952 Statuses=0009 0009 16:53:41 Msec=750 True Az=117.345 Ze=15.72 Az status=0009 Ze status=0009 16:53:42 Check angles 16:53:42 SkyScan query 16:53:42 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.715<-12381 Statuses=0009 0009 16:53:42 Msec=1500 True Az=99.69 Ze=-5.715 Az status=0009 Ze status=0009 16:53:42 Check angles 16:53:42 SkyScan query 16:53:43 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.685<-13779 Statuses=0009 0009 16:53:43 Msec=2250 True Az=82.245 Ze=-26.685 Az status=0009 Ze status=0009 16:53:43 Check angles 16:53:43 SkyScan query 16:53:44 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.58<-14572 Statuses=0009 0008 16:53:44 Msec=3000 True Az=64.68 Ze=-38.58 Az status=0009 Ze status=0008 16:53:44 Check angles 16:53:44 SkyScan query 16:53:44 SkyScan query done: ret=0 az=47.205<-3147 ze=-38.52<-14568 Statuses=0009 0008 16:53:44 Msec=3750 True Az=47.205 Ze=-38.52 Az status=0009 Ze status=0008 16:53:45 Check angles 16:53:45 SkyScan query 16:53:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:53:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:53:45 Message to Master queued w/err=0: serial=280974 error=0 16:53:50 Received message from Master: op=Filter serial=280975 16:53:50 Color wheel filter change from 0 to 0 16:53:50 FLIGetFilterPos err=0 currentPosition=0 16:53:50 FLIGetStepsRemaining err=0 RemainingSteps=0 16:53:50 Filter is already there-color wheel unchanged 16:53:50 Received message from Master: op=Shutter serial=280976 16:53:50 Shutter LASER close 16:53:50 Received message from Camera: op=State serial=280978 16:53:50 GetSingleValue result=40 Value=cccccccc 16:53:50 SkyScan query 16:53:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:53:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:51 Parameters OK 16:53:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:51 Set A/D data flow result=40 16:53:51 Set A/D channel type result=40 16:53:51 Set A/D encoding result=40 16:53:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:51 Set channel filter=0.000000e+000 result=40 16:53:51 Config A/D Result=40 16:53:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:51 Get A/D filter: -9.255963e+061 result=40 16:53:51 Get A/D value=-858993460 result=40 16:53:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:51 Parameters OK 16:53:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:51 Set A/D data flow result=40 16:53:51 Set A/D channel type result=40 16:53:51 Set A/D encoding result=40 16:53:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:51 Set channel filter=0.000000e+000 result=40 16:53:51 Config A/D Result=40 16:53:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:51 Get A/D filter: -9.255963e+061 result=40 16:53:51 Get A/D value=-858993460 result=40 16:53:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:51 Aux= 16:53:51 Message to Camera, serial 280978 queued 16:54:28 Received message from Master: op=PointingHead serial=280991 16:54:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:54:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:54:28 Point started: ret=0 16:54:28 point_skyscan result=0 16:54:29 Check angles 16:54:29 SkyScan query 16:54:29 SkyScan query done: ret=0 az=64.515<-4301 ze=-68.82<-16588 Statuses=0009 0009 16:54:29 Msec=0 True Az=64.515 Ze=-68.82 Az status=0009 Ze status=0009 16:54:30 Check angles 16:54:30 SkyScan query 16:54:30 SkyScan query done: ret=0 az=81.99<-5466 ze=-89.775<-17985 Statuses=0009 0009 16:54:30 Msec=750 True Az=81.99 Ze=-89.775 Az status=0009 Ze status=0009 16:54:30 Check angles 16:54:30 SkyScan query 16:54:31 SkyScan query done: ret=0 az=99.48<-6632 ze=-110.73<-19382 Statuses=0009 0009 16:54:31 Msec=1500 True Az=99.48 Ze=-110.73 Az status=0009 Ze status=0009 16:54:31 Check angles 16:54:31 SkyScan query 16:54:32 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.64<-20776 Statuses=0009 0009 16:54:32 Msec=2250 True Az=116.91 Ze=-131.64 Az status=0009 Ze status=0009 16:54:32 Check angles 16:54:32 SkyScan query 16:54:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 16:54:32 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 16:54:33 Check angles 16:54:33 SkyScan query 16:54:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 16:54:33 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 16:54:33 Message to Master queued w/err=0: serial=280991 error=0 16:54:38 Received message from Master: op=Filter serial=280992 16:54:38 Color wheel filter change from 0 to 0 16:54:38 FLIGetFilterPos err=0 currentPosition=0 16:54:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:54:38 Filter is already there-color wheel unchanged 16:54:38 Received message from Master: op=Shutter serial=280993 16:54:38 Shutter LASER close 16:54:38 Received message from Camera: op=State serial=280995 16:54:38 GetSingleValue result=40 Value=cccccccc 16:54:38 SkyScan query 16:54:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:54:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:39 Parameters OK 16:54:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:39 Set A/D data flow result=40 16:54:39 Set A/D channel type result=40 16:54:39 Set A/D encoding result=40 16:54:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:39 Set channel filter=0.000000e+000 result=40 16:54:39 Config A/D Result=40 16:54:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:39 Get A/D filter: -9.255963e+061 result=40 16:54:39 Get A/D value=-858993460 result=40 16:54:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:39 Parameters OK 16:54:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:39 Set A/D data flow result=40 16:54:39 Set A/D channel type result=40 16:54:39 Set A/D encoding result=40 16:54:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:39 Set channel filter=0.000000e+000 result=40 16:54:39 Config A/D Result=40 16:54:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:39 Get A/D filter: -9.255963e+061 result=40 16:54:39 Get A/D value=-858993460 result=40 16:54:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:54:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:54:39 Aux= 16:54:39 Message to Camera, serial 280995 queued 16:55:16 Received message from Master: op=PointingHead serial=281008 16:55:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:55:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:55:16 Point started: ret=0 16:55:16 point_skyscan result=0 16:55:17 Check angles 16:55:17 SkyScan query 16:55:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 16:55:18 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 16:55:18 Check angles 16:55:18 SkyScan query 16:55:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:55:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:55:18 Message to Master queued w/err=0: serial=281008 error=0 16:55:23 Received message from Master: op=Filter serial=281009 16:55:23 Color wheel filter change from 0 to 0 16:55:23 FLIGetFilterPos err=0 currentPosition=0 16:55:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:55:23 Filter is already there-color wheel unchanged 16:55:23 Received message from Master: op=Shutter serial=281010 16:55:23 Shutter LASER open 16:55:24 Received message from Camera: op=State serial=281012 16:55:24 GetSingleValue result=40 Value=cccccccc 16:55:24 SkyScan query 16:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:55:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:24 Parameters OK 16:55:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:24 Set A/D data flow result=40 16:55:24 Set A/D channel type result=40 16:55:24 Set A/D encoding result=40 16:55:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:24 Set channel filter=0.000000e+000 result=40 16:55:24 Config A/D Result=40 16:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:24 Get A/D filter: -9.255963e+061 result=40 16:55:24 Get A/D value=-858993460 result=40 16:55:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:24 Parameters OK 16:55:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:24 Set A/D data flow result=40 16:55:24 Set A/D channel type result=40 16:55:24 Set A/D encoding result=40 16:55:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:24 Set channel filter=0.000000e+000 result=40 16:55:24 Config A/D Result=40 16:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:24 Get A/D filter: -9.255963e+061 result=40 16:55:24 Get A/D value=-858993460 result=40 16:55:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:55:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:55:24 Aux= 16:55:24 Message to Camera, serial 281012 queued 16:55:33 Received message from Master: op=Shutter serial=281022 16:55:33 Shutter LASER close 16:55:33 Received message from Master: op=PointingHead serial=281026 16:55:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:55:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:55:34 Point started: ret=0 16:55:34 point_skyscan result=0 16:55:34 Check angles 16:55:34 SkyScan query 16:55:35 SkyScan query done: ret=0 az=136.095<-9073 ze=-143.1<-21540 Statuses=0009 0009 16:55:35 Msec=0 True Az=136.095 Ze=-143.1 Az status=0009 Ze status=0009 [UTC 2018-12-19 16:55:35] 16:55:35 Check angles 16:55:35 SkyScan query 16:55:36 SkyScan query done: ret=0 az=155.055<-10337 ze=-120.36<-20024 Statuses=0009 0009 16:55:36 Msec=750 True Az=155.055 Ze=-120.36 Az status=0009 Ze status=0009 16:55:36 Check angles 16:55:36 SkyScan query 16:55:36 SkyScan query done: ret=0 az=171.12<-11408 ze=-101.205<-18747 Statuses=0009 0009 16:55:36 Msec=1500 True Az=171.12 Ze=-101.205 Az status=0009 Ze status=0009 16:55:37 Check angles 16:55:37 SkyScan query 16:55:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.265<-17351 Statuses=0008 0009 16:55:37 Msec=2250 True Az=176.01 Ze=-80.265 Az status=0008 Ze status=0009 16:55:37 Check angles 16:55:37 SkyScan query 16:55:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 16:55:38 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 16:55:38 Check angles 16:55:38 SkyScan query 16:55:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:55:39 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:55:39 Message to Master queued w/err=0: serial=281026 error=0 16:55:44 Received message from Master: op=Filter serial=281027 16:55:44 Color wheel filter change from 0 to 0 16:55:44 FLIGetFilterPos err=0 currentPosition=0 16:55:44 FLIGetStepsRemaining err=0 RemainingSteps=0 16:55:44 Filter is already there-color wheel unchanged 16:55:44 Received message from Master: op=Shutter serial=281028 16:55:44 Shutter LASER close 16:55:44 Received message from Camera: op=State serial=281030 16:55:44 GetSingleValue result=40 Value=cccccccc 16:55:44 SkyScan query 16:55:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:55:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:45 Parameters OK 16:55:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:45 Set A/D data flow result=40 16:55:45 Set A/D channel type result=40 16:55:45 Set A/D encoding result=40 16:55:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:45 Set channel filter=0.000000e+000 result=40 16:55:45 Config A/D Result=40 16:55:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:45 Get A/D filter: -9.255963e+061 result=40 16:55:45 Get A/D value=-858993460 result=40 16:55:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:45 Parameters OK 16:55:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:45 Set A/D data flow result=40 16:55:45 Set A/D channel type result=40 16:55:45 Set A/D encoding result=40 16:55:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:45 Set channel filter=0.000000e+000 result=40 16:55:45 Config A/D Result=40 16:55:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:45 Get A/D filter: -9.255963e+061 result=40 16:55:45 Get A/D value=-858993460 result=40 16:55:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:55:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:55:45 Aux= 16:55:45 Message to Camera, serial 281030 queued [UTC 2018-12-19 16:55:52] 16:56:21 Received message from Master: op=PointingHead serial=281043 16:56:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:56:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:56:22 Point started: ret=0 16:56:22 point_skyscan result=0 16:56:22 Check angles 16:56:22 SkyScan query 16:56:23 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.735<-13449 Statuses=0009 0009 16:56:23 Msec=0 True Az=152.985 Ze=-21.735 Az status=0009 Ze status=0009 16:56:23 Check angles 16:56:23 SkyScan query 16:56:24 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.735<-12049 Statuses=0009 0009 16:56:24 Msec=750 True Az=135.405 Ze=-0.735 Az status=0009 Ze status=0009 16:56:24 Check angles 16:56:24 SkyScan query 16:56:25 SkyScan query done: ret=0 az=117.63<-7842 ze=20.655<-10623 Statuses=0009 0009 16:56:25 Msec=1500 True Az=117.63 Ze=20.655 Az status=0009 Ze status=0009 16:56:25 Check angles 16:56:25 SkyScan query 16:56:25 SkyScan query done: ret=0 az=100.23<-6682 ze=41.61<-9226 Statuses=0009 0009 16:56:25 Msec=2250 True Az=100.23 Ze=41.61 Az status=0009 Ze status=0009 16:56:25 Check angles 16:56:25 SkyScan query 16:56:26 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:56:26 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:56:26 Check angles 16:56:26 SkyScan query 16:56:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:56:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:56:27 Message to Master queued w/err=0: serial=281043 error=0 16:56:32 Received message from Master: op=Filter serial=281044 16:56:32 Color wheel filter change from 0 to 0 16:56:32 FLIGetFilterPos err=0 currentPosition=0 16:56:32 FLIGetStepsRemaining err=0 RemainingSteps=0 16:56:32 Filter is already there-color wheel unchanged 16:56:32 Received message from Master: op=Shutter serial=281045 16:56:32 Shutter LASER close 16:56:32 Received message from Camera: op=State serial=281047 16:56:32 GetSingleValue result=40 Value=cccccccc 16:56:32 SkyScan query 16:56:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:56:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:33 Parameters OK 16:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:33 Set A/D data flow result=40 16:56:33 Set A/D channel type result=40 16:56:33 Set A/D encoding result=40 16:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:33 Set channel filter=0.000000e+000 result=40 16:56:33 Config A/D Result=40 16:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:33 Get A/D filter: -9.255963e+061 result=40 16:56:33 Get A/D value=-858993460 result=40 16:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:33 Parameters OK 16:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:33 Set A/D data flow result=40 16:56:33 Set A/D channel type result=40 16:56:33 Set A/D encoding result=40 16:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:33 Set channel filter=0.000000e+000 result=40 16:56:33 Config A/D Result=40 16:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:33 Get A/D filter: -9.255963e+061 result=40 16:56:33 Get A/D value=-858993460 result=40 16:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:56:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:56:33 Aux= 16:56:33 Message to Camera, serial 281047 queued 16:57:09 Received message from Master: op=PointingHead serial=281059 16:57:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:57:09 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:57:09 Point started: ret=0 16:57:09 point_skyscan result=0 16:57:10 Check angles 16:57:10 SkyScan query 16:57:10 SkyScan query done: ret=0 az=108.735<-7249 ze=38.475<-9435 Statuses=0009 0008 16:57:10 Msec=0 True Az=108.735 Ze=38.475 Az status=0009 Ze status=0008 16:57:10 Check angles 16:57:10 SkyScan query 16:57:11 SkyScan query done: ret=0 az=126.255<-8417 ze=38.505<-9433 Statuses=0009 0008 16:57:11 Msec=750 True Az=126.255 Ze=38.505 Az status=0009 Ze status=0008 16:57:11 Check angles 16:57:11 SkyScan query 16:57:12 SkyScan query done: ret=0 az=144.06<-9604 ze=38.505<-9433 Statuses=0009 0008 16:57:12 Msec=1500 True Az=144.06 Ze=38.505 Az status=0009 Ze status=0008 16:57:12 Check angles 16:57:12 SkyScan query 16:57:12 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 16:57:12 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 16:57:13 Check angles 16:57:13 SkyScan query 16:57:13 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:57:13 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:57:13 Check angles 16:57:13 SkyScan query 16:57:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:57:14 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:57:14 Message to Master queued w/err=0: serial=281059 error=0 16:57:19 Received message from Master: op=Filter serial=281060 16:57:19 Color wheel filter change from 0 to 0 16:57:19 FLIGetFilterPos err=0 currentPosition=0 16:57:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:57:19 Filter is already there-color wheel unchanged 16:57:19 Received message from Master: op=Shutter serial=281061 16:57:19 Shutter LASER close 16:57:19 Received message from Camera: op=State serial=281063 16:57:19 GetSingleValue result=40 Value=cccccccc 16:57:19 SkyScan query 16:57:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:57:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:20 Parameters OK 16:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:20 Set A/D data flow result=40 16:57:20 Set A/D channel type result=40 16:57:20 Set A/D encoding result=40 16:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:20 Set channel filter=0.000000e+000 result=40 16:57:20 Config A/D Result=40 16:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:20 Get A/D filter: -9.255963e+061 result=40 16:57:20 Get A/D value=-858993460 result=40 16:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:20 Parameters OK 16:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:20 Set A/D data flow result=40 16:57:20 Set A/D channel type result=40 16:57:20 Set A/D encoding result=40 16:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:20 Set channel filter=0.000000e+000 result=40 16:57:20 Config A/D Result=40 16:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:20 Get A/D filter: -9.255963e+061 result=40 16:57:20 Get A/D value=-858993460 result=40 16:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:57:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:57:20 Aux= 16:57:20 Message to Camera, serial 281063 queued 16:57:56 Received message from Master: op=PointingHead serial=281075 16:57:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:57:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:57:56 Point started: ret=0 16:57:56 point_skyscan result=0 16:57:57 Check angles 16:57:57 SkyScan query 16:57:57 SkyScan query done: ret=0 az=153.21<-10214 ze=9.03<-11398 Statuses=0009 0009 16:57:57 Msec=0 True Az=153.21 Ze=9.03 Az status=0009 Ze status=0009 16:57:58 Check angles 16:57:58 SkyScan query 16:57:58 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.36<-12824 Statuses=0009 0009 16:57:58 Msec=750 True Az=135.375 Ze=-12.36 Az status=0009 Ze status=0009 16:57:58 Check angles 16:57:58 SkyScan query 16:57:59 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.855<-14257 Statuses=0009 0009 16:57:59 Msec=1500 True Az=117.615 Ze=-33.855 Az status=0009 Ze status=0009 16:57:59 Check angles 16:57:59 SkyScan query 16:58:00 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.57<-15438 Statuses=0009 0009 16:58:00 Msec=2250 True Az=100.185 Ze=-51.57 Az status=0009 Ze status=0009 16:58:00 Check angles 16:58:00 SkyScan query 16:58:00 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 16:58:00 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 16:58:01 Check angles 16:58:01 SkyScan query 16:58:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:58:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:58:01 Message to Master queued w/err=0: serial=281075 error=0 16:58:06 Received message from Master: op=Filter serial=281076 16:58:06 Color wheel filter change from 0 to 0 16:58:06 FLIGetFilterPos err=0 currentPosition=0 16:58:06 FLIGetStepsRemaining err=0 RemainingSteps=0 16:58:06 Filter is already there-color wheel unchanged 16:58:06 Received message from Master: op=Shutter serial=281077 16:58:06 Shutter LASER close 16:58:06 Received message from Camera: op=State serial=281079 16:58:06 GetSingleValue result=40 Value=cccccccc 16:58:06 SkyScan query 16:58:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:58:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:07 Parameters OK 16:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:07 Set A/D data flow result=40 16:58:07 Set A/D channel type result=40 16:58:07 Set A/D encoding result=40 16:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:07 Set channel filter=0.000000e+000 result=40 16:58:07 Config A/D Result=40 16:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:07 Get A/D filter: -9.255963e+061 result=40 16:58:07 Get A/D value=-858993460 result=40 16:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:07 Parameters OK 16:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:07 Set A/D data flow result=40 16:58:07 Set A/D channel type result=40 16:58:07 Set A/D encoding result=40 16:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:07 Set channel filter=0.000000e+000 result=40 16:58:07 Config A/D Result=40 16:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:07 Get A/D filter: -9.255963e+061 result=40 16:58:07 Get A/D value=-858993460 result=40 16:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:58:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:58:07 Aux= 16:58:07 Message to Camera, serial 281079 queued 16:58:44 Received message from Master: op=PointingHead serial=281092 16:58:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:58:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:58:44 Point started: ret=0 16:58:44 point_skyscan result=0 16:58:45 Check angles 16:58:45 SkyScan query 16:58:45 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.54<-17436 Statuses=0009 0009 16:58:45 Msec=0 True Az=109.38 Ze=-81.54 Az status=0009 Ze status=0009 16:58:46 Check angles 16:58:46 SkyScan query 16:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.915<-18861 Statuses=0008 0009 16:58:46 Msec=750 True Az=112.995 Ze=-102.915 Az status=0008 Ze status=0009 16:58:46 Check angles 16:58:46 SkyScan query 16:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 16:58:47 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 16:58:47 Check angles 16:58:47 SkyScan query 16:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 16:58:48 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 16:58:48 Check angles 16:58:48 SkyScan query 16:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.2<-23080 Statuses=0008 0009 16:58:48 Msec=3000 True Az=112.995 Ze=-166.2 Az status=0008 Ze status=0009 16:58:49 Check angles 16:58:49 SkyScan query 16:58:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:58:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:58:49 Message to Master queued w/err=0: serial=281092 error=0 16:58:54 Received message from Master: op=Filter serial=281093 16:58:54 Color wheel filter change from 0 to 0 16:58:54 FLIGetFilterPos err=0 currentPosition=0 16:58:54 FLIGetStepsRemaining err=0 RemainingSteps=0 16:58:54 Filter is already there-color wheel unchanged 16:58:54 Received message from Master: op=Shutter serial=281094 16:58:54 Shutter LASER open 16:58:55 Received message from Camera: op=State serial=281096 16:58:55 GetSingleValue result=40 Value=cccccccc 16:58:55 SkyScan query 16:58:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:58:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:55 Parameters OK 16:58:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:55 Set A/D data flow result=40 16:58:55 Set A/D channel type result=40 16:58:55 Set A/D encoding result=40 16:58:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:55 Set channel filter=0.000000e+000 result=40 16:58:55 Config A/D Result=40 16:58:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:55 Get A/D filter: -9.255963e+061 result=40 16:58:55 Get A/D value=-858993460 result=40 16:58:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:55 Parameters OK 16:58:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:55 Set A/D data flow result=40 16:58:55 Set A/D channel type result=40 16:58:55 Set A/D encoding result=40 16:58:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:55 Set channel filter=0.000000e+000 result=40 16:58:55 Config A/D Result=40 16:58:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:55 Get A/D filter: -9.255963e+061 result=40 16:58:55 Get A/D value=-858993460 result=40 16:58:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:58:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:58:55 Aux= 16:58:55 Message to Camera, serial 281096 queued 16:59:04 Received message from Master: op=Shutter serial=281106 16:59:04 Shutter LASER close 16:59:04 Received message from Master: op=PointingHead serial=281110 16:59:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:59:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:59:04 Point started: ret=0 16:59:04 point_skyscan result=0 16:59:05 Check angles 16:59:05 SkyScan query 16:59:06 SkyScan query done: ret=0 az=89.52<-5968 ze=156.735<-1551 Statuses=0009 0009 16:59:06 Msec=0 True Az=89.52 Ze=156.735 Az status=0009 Ze status=0009 16:59:06 Check angles 16:59:06 SkyScan query 16:59:06 SkyScan query done: ret=0 az=72.06<-4804 ze=135.81<-2946 Statuses=0009 0009 16:59:06 Msec=750 True Az=72.06 Ze=135.81 Az status=0009 Ze status=0009 16:59:07 Check angles 16:59:07 SkyScan query 16:59:07 SkyScan query done: ret=0 az=54.54<-3636 ze=114.81<-4346 Statuses=0009 0009 16:59:07 Msec=1500 True Az=54.54 Ze=114.81 Az status=0009 Ze status=0009 16:59:07 Check angles 16:59:07 SkyScan query 16:59:08 SkyScan query done: ret=0 az=40.98<-2732 ze=93.9<-5740 Statuses=0009 0009 16:59:08 Msec=2250 True Az=40.98 Ze=93.9 Az status=0009 Ze status=0009 16:59:08 Check angles 16:59:08 SkyScan query 16:59:09 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 16:59:09 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 16:59:09 Check angles 16:59:09 SkyScan query 16:59:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 16:59:09 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 16:59:10 Check angles 16:59:10 SkyScan query 16:59:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:59:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:59:10 Message to Master queued w/err=0: serial=281110 error=0 16:59:15 Received message from Master: op=Filter serial=281111 16:59:15 Color wheel filter change from 0 to 0 16:59:15 FLIGetFilterPos err=0 currentPosition=0 16:59:15 FLIGetStepsRemaining err=0 RemainingSteps=0 16:59:15 Filter is already there-color wheel unchanged 16:59:15 Received message from Master: op=Shutter serial=281112 16:59:15 Shutter LASER close 16:59:16 Received message from Camera: op=State serial=281114 16:59:16 GetSingleValue result=40 Value=cccccccc 16:59:16 SkyScan query 16:59:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:59:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:16 Parameters OK 16:59:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:16 Set A/D data flow result=40 16:59:16 Set A/D channel type result=40 16:59:16 Set A/D encoding result=40 16:59:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:16 Set channel filter=0.000000e+000 result=40 16:59:16 Config A/D Result=40 16:59:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:16 Get A/D filter: -9.255963e+061 result=40 16:59:16 Get A/D value=-858993460 result=40 16:59:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:16 Parameters OK 16:59:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:16 Set A/D data flow result=40 16:59:16 Set A/D channel type result=40 16:59:16 Set A/D encoding result=40 16:59:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:16 Set channel filter=0.000000e+000 result=40 16:59:16 Config A/D Result=40 16:59:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:16 Get A/D filter: -9.255963e+061 result=40 16:59:16 Get A/D value=-858993460 result=40 16:59:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:59:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:59:16 Aux= 16:59:16 Message to Camera, serial 281114 queued 16:59:53 Received message from Master: op=PointingHead serial=281127 16:59:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:59:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:59:53 Point started: ret=0 16:59:53 point_skyscan result=0 16:59:54 Check angles 16:59:54 SkyScan query 16:59:55 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 16:59:55 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 16:59:55 Check angles 16:59:55 SkyScan query 16:59:55 SkyScan query done: ret=0 az=81.825<-5455 ze=66.495<-7567 Statuses=0009 0008 16:59:55 Msec=750 True Az=81.825 Ze=66.495 Az status=0009 Ze status=0008 16:59:56 Check angles 16:59:56 SkyScan query 16:59:56 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 16:59:56 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 16:59:56 Check angles 16:59:56 SkyScan query 16:59:57 SkyScan query done: ret=0 az=117.255<-7817 ze=66.495<-7567 Statuses=0009 0008 16:59:57 Msec=2250 True Az=117.255 Ze=66.495 Az status=0009 Ze status=0008 16:59:57 Check angles 16:59:57 SkyScan query 16:59:58 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 16:59:58 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 16:59:58 Check angles 16:59:58 SkyScan query 16:59:58 SkyScan query done: ret=0 az=152.415<-10161 ze=66.495<-7567 Statuses=0009 0008 16:59:58 Msec=3750 True Az=152.415 Ze=66.495 Az status=0009 Ze status=0008 16:59:59 Check angles 16:59:59 SkyScan query 16:59:59 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:59:59 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:59:59 Message to Master queued w/err=0: serial=281127 error=0 17:00:04 Received message from Master: op=Filter serial=281128 17:00:04 Color wheel filter change from 0 to 0 17:00:04 FLIGetFilterPos err=0 currentPosition=0 17:00:04 FLIGetStepsRemaining err=0 RemainingSteps=0 17:00:04 Filter is already there-color wheel unchanged 17:00:04 Received message from Master: op=Shutter serial=281129 17:00:04 Shutter LASER close 17:00:04 Received message from Camera: op=State serial=281131 17:00:04 GetSingleValue result=40 Value=cccccccc 17:00:04 SkyScan query 17:00:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:00:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:05 Parameters OK 17:00:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:05 Set A/D data flow result=40 17:00:05 Set A/D channel type result=40 17:00:05 Set A/D encoding result=40 17:00:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:05 Set channel filter=0.000000e+000 result=40 17:00:05 Config A/D Result=40 17:00:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:05 Get A/D filter: -9.255963e+061 result=40 17:00:05 Get A/D value=-858993460 result=40 17:00:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:05 Parameters OK 17:00:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:05 Set A/D data flow result=40 17:00:05 Set A/D channel type result=40 17:00:05 Set A/D encoding result=40 17:00:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:05 Set channel filter=0.000000e+000 result=40 17:00:05 Config A/D Result=40 17:00:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:05 Get A/D filter: -9.255963e+061 result=40 17:00:05 Get A/D value=-858993460 result=40 17:00:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:00:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:00:05 Aux= 17:00:05 Message to Camera, serial 281131 queued 17:00:42 Received message from Master: op=PointingHead serial=281144 17:00:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:00:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:00:42 Point started: ret=0 17:00:42 point_skyscan result=0 17:00:43 Check angles 17:00:43 SkyScan query 17:00:44 SkyScan query done: ret=0 az=134.565<-8971 ze=36.15<-9590 Statuses=0009 0009 17:00:44 Msec=0 True Az=134.565 Ze=36.15 Az status=0009 Ze status=0009 17:00:44 Check angles 17:00:44 SkyScan query 17:00:44 SkyScan query done: ret=0 az=116.7<-7780 ze=14.73<-11018 Statuses=0009 0009 17:00:44 Msec=750 True Az=116.7 Ze=14.73 Az status=0009 Ze status=0009 17:00:44 Check angles 17:00:44 SkyScan query 17:00:45 SkyScan query done: ret=0 az=99.18<-6612 ze=-6.255<-12417 Statuses=0009 0009 17:00:45 Msec=1500 True Az=99.18 Ze=-6.255 Az status=0009 Ze status=0009 17:00:45 Check angles 17:00:45 SkyScan query 17:00:46 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.195<-13813 Statuses=0009 0009 17:00:46 Msec=2250 True Az=81.81 Ze=-27.195 Az status=0009 Ze status=0009 17:00:46 Check angles 17:00:46 SkyScan query 17:00:47 SkyScan query done: ret=0 az=63.975<-4265 ze=-38.58<-14572 Statuses=0009 0008 17:00:47 Msec=3000 True Az=63.975 Ze=-38.58 Az status=0009 Ze status=0008 17:00:47 Check angles 17:00:47 SkyScan query 17:00:47 SkyScan query done: ret=0 az=46.14<-3076 ze=-38.52<-14568 Statuses=0009 0008 17:00:47 Msec=3750 True Az=46.14 Ze=-38.52 Az status=0009 Ze status=0008 17:00:48 Check angles 17:00:48 SkyScan query 17:00:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:00:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:00:48 Message to Master queued w/err=0: serial=281144 error=0 17:00:53 Received message from Master: op=Filter serial=281145 17:00:53 Color wheel filter change from 0 to 0 17:00:53 FLIGetFilterPos err=0 currentPosition=0 17:00:53 FLIGetStepsRemaining err=0 RemainingSteps=0 17:00:53 Filter is already there-color wheel unchanged 17:00:53 Received message from Master: op=Shutter serial=281146 17:00:53 Shutter LASER close 17:00:53 Received message from Camera: op=State serial=281148 17:00:53 GetSingleValue result=40 Value=cccccccc 17:00:53 SkyScan query 17:00:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:00:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:54 Parameters OK 17:00:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:54 Set A/D data flow result=40 17:00:54 Set A/D channel type result=40 17:00:54 Set A/D encoding result=40 17:00:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:54 Set channel filter=0.000000e+000 result=40 17:00:54 Config A/D Result=40 17:00:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:54 Get A/D filter: -9.255963e+061 result=40 17:00:54 Get A/D value=-858993460 result=40 17:00:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:54 Parameters OK 17:00:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:54 Set A/D data flow result=40 17:00:54 Set A/D channel type result=40 17:00:54 Set A/D encoding result=40 17:00:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:54 Set channel filter=0.000000e+000 result=40 17:00:54 Config A/D Result=40 17:00:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:54 Get A/D filter: -9.255963e+061 result=40 17:00:54 Get A/D value=-858993460 result=40 17:00:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:00:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:00:54 Aux= 17:00:54 Message to Camera, serial 281148 queued 17:01:31 Received message from Master: op=PointingHead serial=281161 17:01:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:01:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:01:31 Point started: ret=0 17:01:31 point_skyscan result=0 17:01:32 Check angles 17:01:32 SkyScan query 17:01:32 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.55<-16570 Statuses=0009 0009 17:01:32 Msec=0 True Az=64.44 Ze=-68.55 Az status=0009 Ze status=0009 17:01:33 Check angles 17:01:33 SkyScan query 17:01:33 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.535<-17969 Statuses=0009 0009 17:01:33 Msec=750 True Az=81.855 Ze=-89.535 Az status=0009 Ze status=0009 17:01:33 Check angles 17:01:33 SkyScan query 17:01:34 SkyScan query done: ret=0 az=99.75<-6650 ze=-110.91<-19394 Statuses=0009 0009 17:01:34 Msec=1500 True Az=99.75 Ze=-110.91 Az status=0009 Ze status=0009 17:01:34 Check angles 17:01:34 SkyScan query 17:01:35 SkyScan query done: ret=0 az=117.27<-7818 ze=-131.82<-20788 Statuses=0009 0009 17:01:35 Msec=2250 True Az=117.27 Ze=-131.82 Az status=0009 Ze status=0009 17:01:35 Check angles 17:01:35 SkyScan query 17:01:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 17:01:35 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 17:01:36 Check angles 17:01:36 SkyScan query 17:01:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 17:01:36 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 17:01:36 Message to Master queued w/err=0: serial=281161 error=0 17:01:41 Received message from Master: op=Filter serial=281162 17:01:41 Color wheel filter change from 0 to 0 17:01:41 FLIGetFilterPos err=0 currentPosition=0 17:01:41 FLIGetStepsRemaining err=0 RemainingSteps=0 17:01:41 Filter is already there-color wheel unchanged 17:01:41 Received message from Master: op=Shutter serial=281163 17:01:41 Shutter LASER close 17:01:41 Received message from Camera: op=State serial=281165 17:01:41 GetSingleValue result=40 Value=cccccccc 17:01:41 SkyScan query 17:01:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:01:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:42 Parameters OK 17:01:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:42 Set A/D data flow result=40 17:01:42 Set A/D channel type result=40 17:01:42 Set A/D encoding result=40 17:01:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:42 Set channel filter=0.000000e+000 result=40 17:01:42 Config A/D Result=40 17:01:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:42 Get A/D filter: -9.255963e+061 result=40 17:01:42 Get A/D value=-858993460 result=40 17:01:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:42 Parameters OK 17:01:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:42 Set A/D data flow result=40 17:01:42 Set A/D channel type result=40 17:01:42 Set A/D encoding result=40 17:01:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:42 Set channel filter=0.000000e+000 result=40 17:01:42 Config A/D Result=40 17:01:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:42 Get A/D filter: -9.255963e+061 result=40 17:01:42 Get A/D value=-858993460 result=40 17:01:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:01:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:01:42 Aux= 17:01:42 Message to Camera, serial 281165 queued 17:02:18 Received message from Master: op=PointingHead serial=281177 17:02:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:02:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:02:18 Point started: ret=0 17:02:18 point_skyscan result=0 17:02:19 Check angles 17:02:19 SkyScan query 17:02:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.33<-23422 Statuses=0009 0009 17:02:20 Msec=0 True Az=113.01 Ze=-171.33 Az status=0009 Ze status=0009 17:02:20 Check angles 17:02:20 SkyScan query 17:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:02:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:02:20 Message to Master queued w/err=0: serial=281177 error=0 17:02:25 Received message from Master: op=Filter serial=281178 17:02:25 Color wheel filter change from 0 to 0 17:02:25 FLIGetFilterPos err=0 currentPosition=0 17:02:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:02:25 Filter is already there-color wheel unchanged 17:02:25 Received message from Master: op=Shutter serial=281179 17:02:25 Shutter LASER open 17:02:26 Received message from Camera: op=State serial=281181 17:02:26 GetSingleValue result=40 Value=cccccccc 17:02:26 SkyScan query 17:02:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:02:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:26 Parameters OK 17:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:26 Set A/D data flow result=40 17:02:26 Set A/D channel type result=40 17:02:26 Set A/D encoding result=40 17:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:26 Set channel filter=0.000000e+000 result=40 17:02:26 Config A/D Result=40 17:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:26 Get A/D filter: -9.255963e+061 result=40 17:02:26 Get A/D value=-858993460 result=40 17:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:26 Parameters OK 17:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:26 Set A/D data flow result=40 17:02:26 Set A/D channel type result=40 17:02:26 Set A/D encoding result=40 17:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:26 Set channel filter=0.000000e+000 result=40 17:02:26 Config A/D Result=40 17:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:26 Get A/D filter: -9.255963e+061 result=40 17:02:26 Get A/D value=-858993460 result=40 17:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:26 Aux= 17:02:26 Message to Camera, serial 281181 queued 17:02:35 Received message from Master: op=Shutter serial=281191 17:02:35 Shutter LASER close 17:02:35 Received message from Master: op=PointingHead serial=281195 17:02:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:02:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:02:36 Point started: ret=0 17:02:36 point_skyscan result=0 17:02:36 Check angles 17:02:36 SkyScan query 17:02:37 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.295<-21553 Statuses=0009 0009 17:02:37 Msec=0 True Az=135.9 Ze=-143.295 Az status=0009 Ze status=0009 17:02:37 Check angles 17:02:37 SkyScan query 17:02:38 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.325<-20155 Statuses=0009 0009 17:02:38 Msec=750 True Az=153.45 Ze=-122.325 Az status=0009 Ze status=0009 17:02:38 Check angles 17:02:38 SkyScan query 17:02:38 SkyScan query done: ret=0 az=171<-11400 ze=-101.445<-18763 Statuses=0009 0009 17:02:38 Msec=1500 True Az=171 Ze=-101.445 Az status=0009 Ze status=0009 17:02:39 Check angles 17:02:39 SkyScan query 17:02:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.475<-17365 Statuses=0008 0009 17:02:39 Msec=2250 True Az=175.995 Ze=-80.475 Az status=0008 Ze status=0009 17:02:39 Check angles 17:02:39 SkyScan query 17:02:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 17:02:40 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 17:02:40 Check angles 17:02:40 SkyScan query 17:02:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 17:02:41 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 17:02:41 Message to Master queued w/err=0: serial=281195 error=0 17:02:46 Received message from Master: op=Filter serial=281196 17:02:46 Color wheel filter change from 0 to 0 17:02:46 FLIGetFilterPos err=0 currentPosition=0 17:02:46 FLIGetStepsRemaining err=0 RemainingSteps=0 17:02:46 Filter is already there-color wheel unchanged 17:02:46 Received message from Master: op=Shutter serial=281197 17:02:46 Shutter LASER close 17:02:46 Received message from Camera: op=State serial=281199 17:02:46 GetSingleValue result=40 Value=cccccccc 17:02:46 SkyScan query 17:02:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:02:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:47 Parameters OK 17:02:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:47 Set A/D data flow result=40 17:02:47 Set A/D channel type result=40 17:02:47 Set A/D encoding result=40 17:02:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:47 Set channel filter=0.000000e+000 result=40 17:02:47 Config A/D Result=40 17:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:47 Get A/D filter: -9.255963e+061 result=40 17:02:47 Get A/D value=-858993460 result=40 17:02:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:47 Parameters OK 17:02:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:47 Set A/D data flow result=40 17:02:47 Set A/D channel type result=40 17:02:47 Set A/D encoding result=40 17:02:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:47 Set channel filter=0.000000e+000 result=40 17:02:47 Config A/D Result=40 17:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:47 Get A/D filter: -9.255963e+061 result=40 17:02:47 Get A/D value=-858993460 result=40 17:02:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:47 Aux= 17:02:47 Message to Camera, serial 281199 queued 17:03:23 Received message from Master: op=PointingHead serial=281212 17:03:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:03:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:03:24 Point started: ret=0 17:03:24 point_skyscan result=0 17:03:25 Check angles 17:03:25 SkyScan query 17:03:25 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.615<-13441 Statuses=0009 0009 17:03:25 Msec=0 True Az=152.925 Ze=-21.615 Az status=0009 Ze status=0009 17:03:25 Check angles 17:03:25 SkyScan query 17:03:26 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.63<-12042 Statuses=0009 0009 17:03:26 Msec=750 True Az=135.405 Ze=-0.63 Az status=0009 Ze status=0009 17:03:26 Check angles 17:03:26 SkyScan query 17:03:27 SkyScan query done: ret=0 az=117.855<-7857 ze=20.31<-10646 Statuses=0009 0009 17:03:27 Msec=1500 True Az=117.855 Ze=20.31 Az status=0009 Ze status=0009 17:03:27 Check angles 17:03:27 SkyScan query 17:03:27 SkyScan query done: ret=0 az=100.5<-6700 ze=41.28<-9248 Statuses=0009 0009 17:03:27 Msec=2250 True Az=100.5 Ze=41.28 Az status=0009 Ze status=0009 17:03:28 Check angles 17:03:28 SkyScan query 17:03:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 17:03:28 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 17:03:28 Check angles 17:03:28 SkyScan query 17:03:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:03:29 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 17:03:29 Message to Master queued w/err=0: serial=281212 error=0 17:03:34 Received message from Master: op=Filter serial=281213 17:03:34 Color wheel filter change from 0 to 0 17:03:34 FLIGetFilterPos err=0 currentPosition=0 17:03:34 FLIGetStepsRemaining err=0 RemainingSteps=0 17:03:34 Filter is already there-color wheel unchanged 17:03:34 Received message from Master: op=Shutter serial=281214 17:03:34 Shutter LASER close 17:03:34 Received message from Camera: op=State serial=281216 17:03:34 GetSingleValue result=40 Value=cccccccc 17:03:34 SkyScan query 17:03:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 17:03:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:35 Parameters OK 17:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:35 Set A/D data flow result=40 17:03:35 Set A/D channel type result=40 17:03:35 Set A/D encoding result=40 17:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:35 Set channel filter=0.000000e+000 result=40 17:03:35 Config A/D Result=40 17:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:35 Get A/D filter: -9.255963e+061 result=40 17:03:35 Get A/D value=-858993460 result=40 17:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:35 Parameters OK 17:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:35 Set A/D data flow result=40 17:03:35 Set A/D channel type result=40 17:03:35 Set A/D encoding result=40 17:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:35 Set channel filter=0.000000e+000 result=40 17:03:35 Config A/D Result=40 17:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:35 Get A/D filter: -9.255963e+061 result=40 17:03:35 Get A/D value=-858993460 result=40 17:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:03:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:03:35 Aux= 17:03:35 Message to Camera, serial 281216 queued 17:04:12 Received message from Master: op=PointingHead serial=281229 17:04:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:04:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:04:12 Point started: ret=0 17:04:12 point_skyscan result=0 17:04:13 Check angles 17:04:13 SkyScan query 17:04:13 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 17:04:13 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 17:04:13 Check angles 17:04:13 SkyScan query 17:04:14 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 17:04:14 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 17:04:14 Check angles 17:04:14 SkyScan query 17:04:15 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 17:04:15 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 17:04:15 Check angles 17:04:15 SkyScan query 17:04:15 SkyScan query done: ret=0 az=161.715<-10781 ze=38.505<-9433 Statuses=0009 0008 17:04:15 Msec=2250 True Az=161.715 Ze=38.505 Az status=0009 Ze status=0008 17:04:16 Check angles 17:04:16 SkyScan query 17:04:16 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:04:16 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:04:16 Check angles 17:04:16 SkyScan query 17:04:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:04:17 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:04:17 Message to Master queued w/err=0: serial=281229 error=0 17:04:22 Received message from Master: op=Filter serial=281230 17:04:22 Color wheel filter change from 0 to 0 17:04:22 FLIGetFilterPos err=0 currentPosition=0 17:04:22 FLIGetStepsRemaining err=0 RemainingSteps=0 17:04:22 Filter is already there-color wheel unchanged 17:04:22 Received message from Master: op=Shutter serial=281231 17:04:22 Shutter LASER close 17:04:22 Received message from Camera: op=State serial=281233 17:04:22 GetSingleValue result=40 Value=cccccccc 17:04:22 SkyScan query 17:04:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:04:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:23 Parameters OK 17:04:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:23 Set A/D data flow result=40 17:04:23 Set A/D channel type result=40 17:04:23 Set A/D encoding result=40 17:04:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:23 Set channel filter=0.000000e+000 result=40 17:04:23 Config A/D Result=40 17:04:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:23 Get A/D filter: -9.255963e+061 result=40 17:04:23 Get A/D value=-858993460 result=40 17:04:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:23 Parameters OK 17:04:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:23 Set A/D data flow result=40 17:04:23 Set A/D channel type result=40 17:04:23 Set A/D encoding result=40 17:04:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:23 Set channel filter=0.000000e+000 result=40 17:04:23 Config A/D Result=40 17:04:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:23 Get A/D filter: -9.255963e+061 result=40 17:04:23 Get A/D value=-858993460 result=40 17:04:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:04:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:04:23 Aux= 17:04:23 Message to Camera, serial 281233 queued 17:05:00 Received message from Master: op=PointingHead serial=281246 17:05:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:05:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:05:00 Point started: ret=0 17:05:00 point_skyscan result=0 17:05:01 Check angles 17:05:01 SkyScan query 17:05:01 SkyScan query done: ret=0 az=152.865<-10191 ze=8.505<-11433 Statuses=0009 0009 17:05:01 Msec=0 True Az=152.865 Ze=8.505 Az status=0009 Ze status=0009 17:05:01 Check angles 17:05:01 SkyScan query 17:05:02 SkyScan query done: ret=0 az=134.97<-8998 ze=-12.885<-12859 Statuses=0009 0009 17:05:02 Msec=750 True Az=134.97 Ze=-12.885 Az status=0009 Ze status=0009 17:05:02 Check angles 17:05:02 SkyScan query 17:05:03 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.915<-14261 Statuses=0009 0009 17:05:03 Msec=1500 True Az=117.54 Ze=-33.915 Az status=0009 Ze status=0009 17:05:03 Check angles 17:05:03 SkyScan query 17:05:04 SkyScan query done: ret=0 az=100.125<-6675 ze=-51.57<-15438 Statuses=0009 0009 17:05:04 Msec=2250 True Az=100.125 Ze=-51.57 Az status=0009 Ze status=0009 17:05:04 Check angles 17:05:04 SkyScan query 17:05:04 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 17:05:04 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 17:05:04 Check angles 17:05:04 SkyScan query 17:05:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:05:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:05:05 Message to Master queued w/err=0: serial=281246 error=0 17:05:10 Received message from Master: op=Filter serial=281247 17:05:10 Color wheel filter change from 0 to 0 17:05:10 FLIGetFilterPos err=0 currentPosition=0 17:05:10 FLIGetStepsRemaining err=0 RemainingSteps=0 17:05:10 Filter is already there-color wheel unchanged 17:05:10 Received message from Master: op=Shutter serial=281248 17:05:10 Shutter LASER close 17:05:10 Received message from Camera: op=State serial=281250 17:05:10 GetSingleValue result=40 Value=cccccccc 17:05:10 SkyScan query 17:05:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:05:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:11 Parameters OK 17:05:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:11 Set A/D data flow result=40 17:05:11 Set A/D channel type result=40 17:05:11 Set A/D encoding result=40 17:05:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:11 Set channel filter=0.000000e+000 result=40 17:05:11 Config A/D Result=40 17:05:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:11 Get A/D filter: -9.255963e+061 result=40 17:05:11 Get A/D value=-858993460 result=40 17:05:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:11 Parameters OK 17:05:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:11 Set A/D data flow result=40 17:05:11 Set A/D channel type result=40 17:05:11 Set A/D encoding result=40 17:05:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:11 Set channel filter=0.000000e+000 result=40 17:05:11 Config A/D Result=40 17:05:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:11 Get A/D filter: -9.255963e+061 result=40 17:05:11 Get A/D value=-858993460 result=40 17:05:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:05:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:05:11 Aux= 17:05:11 Message to Camera, serial 281250 queued 17:05:48 Received message from Master: op=PointingHead serial=281263 17:05:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:05:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:05:48 Point started: ret=0 17:05:48 point_skyscan result=0 17:05:49 Check angles 17:05:49 SkyScan query 17:05:49 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.135<-17409 Statuses=0009 0009 17:05:49 Msec=0 True Az=108.9 Ze=-81.135 Az status=0009 Ze status=0009 17:05:50 Check angles 17:05:50 SkyScan query 17:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.135<-18809 Statuses=0008 0009 17:05:50 Msec=750 True Az=112.995 Ze=-102.135 Az status=0008 Ze status=0009 17:05:50 Check angles 17:05:50 SkyScan query 17:05:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 17:05:51 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 17:05:51 Check angles 17:05:51 SkyScan query 17:05:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.03<-21602 Statuses=0008 0009 17:05:52 Msec=2250 True Az=112.995 Ze=-144.03 Az status=0008 Ze status=0009 17:05:52 Check angles 17:05:52 SkyScan query 17:05:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.955<-22997 Statuses=0008 0009 17:05:52 Msec=3000 True Az=112.995 Ze=-164.955 Az status=0008 Ze status=0009 17:05:53 Check angles 17:05:53 SkyScan query 17:05:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:05:53 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:05:53 Message to Master queued w/err=0: serial=281263 error=0 17:05:58 Received message from Master: op=Filter serial=281264 17:05:58 Color wheel filter change from 0 to 0 17:05:58 FLIGetFilterPos err=0 currentPosition=0 17:05:58 FLIGetStepsRemaining err=0 RemainingSteps=0 17:05:58 Filter is already there-color wheel unchanged 17:05:58 Received message from Master: op=Shutter serial=281265 17:05:58 Shutter LASER open 17:05:58 Received message from Camera: op=State serial=281267 17:05:58 GetSingleValue result=40 Value=cccccccc 17:05:58 SkyScan query 17:05:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:05:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:59 Parameters OK 17:05:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:59 Set A/D data flow result=40 17:05:59 Set A/D channel type result=40 17:05:59 Set A/D encoding result=40 17:05:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:59 Set channel filter=0.000000e+000 result=40 17:05:59 Config A/D Result=40 17:05:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:59 Get A/D filter: -9.255963e+061 result=40 17:05:59 Get A/D value=-858993460 result=40 17:05:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:59 Parameters OK 17:05:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:59 Set A/D data flow result=40 17:05:59 Set A/D channel type result=40 17:05:59 Set A/D encoding result=40 17:05:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:59 Set channel filter=0.000000e+000 result=40 17:05:59 Config A/D Result=40 17:05:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:59 Get A/D filter: -9.255963e+061 result=40 17:05:59 Get A/D value=-858993460 result=40 17:05:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:05:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:05:59 Aux= 17:05:59 Message to Camera, serial 281267 queued 17:06:07 Received message from Master: op=Shutter serial=281277 17:06:07 Shutter LASER close 17:06:08 Received message from Master: op=PointingHead serial=281281 17:06:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:06:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-19 17:06:08] 17:06:08 Point started: ret=0 17:06:08 point_skyscan result=0 17:06:09 Check angles 17:06:09 SkyScan query 17:06:10 SkyScan query done: ret=0 az=88.14<-5876 ze=155.01<-1666 Statuses=0009 0009 17:06:10 Msec=0 True Az=88.14 Ze=155.01 Az status=0009 Ze status=0009 17:06:10 Check angles 17:06:10 SkyScan query 17:06:10 SkyScan query done: ret=0 az=70.32<-4688 ze=133.635<-3091 Statuses=0009 0009 17:06:10 Msec=750 True Az=70.32 Ze=133.635 Az status=0009 Ze status=0009 17:06:11 Check angles 17:06:11 SkyScan query 17:06:11 SkyScan query done: ret=0 az=52.83<-3522 ze=112.605<-4493 Statuses=0009 0009 17:06:11 Msec=1500 True Az=52.83 Ze=112.605 Az status=0009 Ze status=0009 17:06:11 Check angles 17:06:11 SkyScan query 17:06:12 SkyScan query done: ret=0 az=40.995<-2733 ze=91.71<-5886 Statuses=0008 0009 17:06:12 Msec=2250 True Az=40.995 Ze=91.71 Az status=0008 Ze status=0009 17:06:12 Check angles 17:06:12 SkyScan query 17:06:13 SkyScan query done: ret=0 az=40.995<-2733 ze=70.26<-7316 Statuses=0008 0009 17:06:13 Msec=3000 True Az=40.995 Ze=70.26 Az status=0008 Ze status=0009 17:06:13 Check angles 17:06:13 SkyScan query 17:06:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.525<-8565 Statuses=0008 0009 17:06:14 Msec=3750 True Az=40.995 Ze=51.525 Az status=0008 Ze status=0009 17:06:14 Check angles 17:06:14 SkyScan query 17:06:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:06:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:06:14 Message to Master queued w/err=0: serial=281281 error=0 17:06:19 Received message from Master: op=Filter serial=281282 17:06:19 Color wheel filter change from 0 to 0 17:06:19 FLIGetFilterPos err=0 currentPosition=0 17:06:19 FLIGetStepsRemaining err=0 RemainingSteps=0 17:06:19 Filter is already there-color wheel unchanged 17:06:19 Received message from Master: op=Shutter serial=281283 17:06:19 Shutter LASER close 17:06:20 Received message from Camera: op=State serial=281285 17:06:20 GetSingleValue result=40 Value=cccccccc 17:06:20 SkyScan query 17:06:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:06:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:20 Parameters OK 17:06:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:20 Set A/D data flow result=40 17:06:20 Set A/D channel type result=40 17:06:20 Set A/D encoding result=40 17:06:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:20 Set channel filter=0.000000e+000 result=40 17:06:20 Config A/D Result=40 17:06:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:20 Get A/D filter: -9.255963e+061 result=40 17:06:20 Get A/D value=-858993460 result=40 17:06:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:20 Parameters OK 17:06:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:20 Set A/D data flow result=40 17:06:20 Set A/D channel type result=40 17:06:20 Set A/D encoding result=40 17:06:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:20 Set channel filter=0.000000e+000 result=40 17:06:20 Config A/D Result=40 17:06:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:20 Get A/D filter: -9.255963e+061 result=40 17:06:20 Get A/D value=-858993460 result=40 17:06:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:06:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:06:20 Aux= 17:06:20 Message to Camera, serial 281285 queued 17:06:57 Received message from Master: op=PointingHead serial=281298 17:06:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:06:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:06:57 Point started: ret=0 17:06:57 point_skyscan result=0 17:06:58 Check angles 17:06:58 SkyScan query 17:06:59 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 17:06:59 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 17:06:59 Check angles 17:06:59 SkyScan query 17:06:59 SkyScan query done: ret=0 az=81.675<-5445 ze=66.495<-7567 Statuses=0009 0008 17:06:59 Msec=750 True Az=81.675 Ze=66.495 Az status=0009 Ze status=0008 17:07:00 Check angles 17:07:00 SkyScan query 17:07:00 SkyScan query done: ret=0 az=99.12<-6608 ze=66.495<-7567 Statuses=0009 0008 17:07:00 Msec=1500 True Az=99.12 Ze=66.495 Az status=0009 Ze status=0008 17:07:00 Check angles 17:07:00 SkyScan query 17:07:01 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 17:07:01 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 17:07:01 Check angles 17:07:01 SkyScan query 17:07:02 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 17:07:02 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 17:07:02 Check angles 17:07:02 SkyScan query 17:07:02 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 17:07:02 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 17:07:03 Check angles 17:07:03 SkyScan query 17:07:03 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:07:03 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:07:03 Message to Master queued w/err=0: serial=281298 error=0 17:07:08 Received message from Master: op=Filter serial=281299 17:07:08 Color wheel filter change from 0 to 0 17:07:08 FLIGetFilterPos err=0 currentPosition=0 17:07:08 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:08 Filter is already there-color wheel unchanged 17:07:08 Received message from Master: op=Shutter serial=281300 17:07:08 Shutter LASER close 17:07:08 Received message from Camera: op=State serial=281302 17:07:08 GetSingleValue result=40 Value=cccccccc 17:07:08 SkyScan query 17:07:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:07:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:09 Parameters OK 17:07:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:09 Set A/D data flow result=40 17:07:09 Set A/D channel type result=40 17:07:09 Set A/D encoding result=40 17:07:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:09 Set channel filter=0.000000e+000 result=40 17:07:09 Config A/D Result=40 17:07:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:09 Get A/D filter: -9.255963e+061 result=40 17:07:09 Get A/D value=-858993460 result=40 17:07:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:09 Parameters OK 17:07:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:09 Set A/D data flow result=40 17:07:09 Set A/D channel type result=40 17:07:09 Set A/D encoding result=40 17:07:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:09 Set channel filter=0.000000e+000 result=40 17:07:09 Config A/D Result=40 17:07:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:09 Get A/D filter: -9.255963e+061 result=40 17:07:09 Get A/D value=-858993460 result=40 17:07:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:09 Aux= 17:07:09 Message to Camera, serial 281302 queued 17:07:46 Received message from Master: op=PointingHead serial=281315 17:07:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:07:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:07:46 Point started: ret=0 17:07:46 point_skyscan result=0 17:07:47 Check angles 17:07:47 SkyScan query 17:07:48 SkyScan query done: ret=0 az=134.985<-8999 ze=36.615<-9559 Statuses=0009 0009 17:07:48 Msec=0 True Az=134.985 Ze=36.615 Az status=0009 Ze status=0009 17:07:48 Check angles 17:07:48 SkyScan query 17:07:48 SkyScan query done: ret=0 az=117.12<-7808 ze=15.255<-10983 Statuses=0009 0009 17:07:48 Msec=750 True Az=117.12 Ze=15.255 Az status=0009 Ze status=0009 17:07:48 Check angles 17:07:48 SkyScan query 17:07:49 SkyScan query done: ret=0 az=99.735<-6649 ze=-5.76<-12384 Statuses=0009 0009 17:07:49 Msec=1500 True Az=99.735 Ze=-5.76 Az status=0009 Ze status=0009 17:07:49 Check angles 17:07:49 SkyScan query 17:07:50 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.715<-13781 Statuses=0009 0009 17:07:50 Msec=2250 True Az=82.23 Ze=-26.715 Az status=0009 Ze status=0009 17:07:50 Check angles 17:07:50 SkyScan query 17:07:51 SkyScan query done: ret=0 az=64.38<-4292 ze=-38.58<-14572 Statuses=0009 0008 17:07:51 Msec=3000 True Az=64.38 Ze=-38.58 Az status=0009 Ze status=0008 17:07:51 Check angles 17:07:51 SkyScan query 17:07:51 SkyScan query done: ret=0 az=46.86<-3124 ze=-38.52<-14568 Statuses=0009 0008 17:07:51 Msec=3750 True Az=46.86 Ze=-38.52 Az status=0009 Ze status=0008 17:07:51 Check angles 17:07:51 SkyScan query 17:07:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:07:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:07:52 Message to Master queued w/err=0: serial=281315 error=0 17:07:57 Received message from Master: op=Filter serial=281316 17:07:57 Color wheel filter change from 0 to 0 17:07:57 FLIGetFilterPos err=0 currentPosition=0 17:07:57 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:57 Filter is already there-color wheel unchanged 17:07:57 Received message from Master: op=Shutter serial=281317 17:07:57 Shutter LASER close 17:07:57 Received message from Camera: op=State serial=281319 17:07:57 GetSingleValue result=40 Value=cccccccc 17:07:57 SkyScan query 17:07:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:07:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:58 Parameters OK 17:07:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:58 Set A/D data flow result=40 17:07:58 Set A/D channel type result=40 17:07:58 Set A/D encoding result=40 17:07:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:58 Set channel filter=0.000000e+000 result=40 17:07:58 Config A/D Result=40 17:07:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:58 Get A/D filter: -9.255963e+061 result=40 17:07:58 Get A/D value=-858993460 result=40 17:07:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:58 Parameters OK 17:07:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:58 Set A/D data flow result=40 17:07:58 Set A/D channel type result=40 17:07:58 Set A/D encoding result=40 17:07:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:58 Set channel filter=0.000000e+000 result=40 17:07:58 Config A/D Result=40 17:07:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:58 Get A/D filter: -9.255963e+061 result=40 17:07:58 Get A/D value=-858993460 result=40 17:07:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:58 Aux= 17:07:58 Message to Camera, serial 281319 queued 17:08:35 Received message from Master: op=PointingHead serial=281332 17:08:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:08:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:08:35 Point started: ret=0 17:08:35 point_skyscan result=0 17:08:36 Check angles 17:08:36 SkyScan query 17:08:36 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.145<-16543 Statuses=0009 0009 17:08:36 Msec=0 True Az=63.93 Ze=-68.145 Az status=0009 Ze status=0009 17:08:37 Check angles 17:08:37 SkyScan query 17:08:37 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.13<-17942 Statuses=0009 0009 17:08:37 Msec=750 True Az=81.36 Ze=-89.13 Az status=0009 Ze status=0009 17:08:37 Check angles 17:08:37 SkyScan query 17:08:38 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.01<-19334 Statuses=0009 0009 17:08:38 Msec=1500 True Az=98.865 Ze=-110.01 Az status=0009 Ze status=0009 17:08:38 Check angles 17:08:38 SkyScan query 17:08:39 SkyScan query done: ret=0 az=116.22<-7748 ze=-131.01<-20734 Statuses=0009 0009 17:08:39 Msec=2250 True Az=116.22 Ze=-131.01 Az status=0009 Ze status=0009 17:08:39 Check angles 17:08:39 SkyScan query 17:08:39 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 17:08:39 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 17:08:40 Check angles 17:08:40 SkyScan query 17:08:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 17:08:40 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 17:08:40 Message to Master queued w/err=0: serial=281332 error=0 17:08:45 Received message from Master: op=Filter serial=281333 17:08:45 Color wheel filter change from 0 to 0 17:08:45 FLIGetFilterPos err=0 currentPosition=0 17:08:45 FLIGetStepsRemaining err=0 RemainingSteps=0 17:08:45 Filter is already there-color wheel unchanged 17:08:45 Received message from Master: op=Shutter serial=281334 17:08:45 Shutter LASER close 17:08:45 Received message from Camera: op=State serial=281336 17:08:45 GetSingleValue result=40 Value=cccccccc 17:08:45 SkyScan query 17:08:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:08:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:46 Parameters OK 17:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:46 Set A/D data flow result=40 17:08:46 Set A/D channel type result=40 17:08:46 Set A/D encoding result=40 17:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:46 Set channel filter=0.000000e+000 result=40 17:08:46 Config A/D Result=40 17:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:46 Get A/D filter: -9.255963e+061 result=40 17:08:46 Get A/D value=-858993460 result=40 17:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:46 Parameters OK 17:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:46 Set A/D data flow result=40 17:08:46 Set A/D channel type result=40 17:08:46 Set A/D encoding result=40 17:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:46 Set channel filter=0.000000e+000 result=40 17:08:46 Config A/D Result=40 17:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:46 Get A/D filter: -9.255963e+061 result=40 17:08:46 Get A/D value=-858993460 result=40 17:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:08:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:08:46 Aux= 17:08:46 Message to Camera, serial 281336 queued 17:09:23 Received message from Master: op=PointingHead serial=281349 17:09:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:09:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:09:23 Point started: ret=0 17:09:23 point_skyscan result=0 17:09:24 Check angles 17:09:24 SkyScan query 17:09:24 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 17:09:24 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 17:09:25 Check angles 17:09:25 SkyScan query 17:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:09:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:09:25 Message to Master queued w/err=0: serial=281349 error=0 17:09:30 Received message from Master: op=Filter serial=281350 17:09:30 Color wheel filter change from 0 to 0 17:09:30 FLIGetFilterPos err=0 currentPosition=0 17:09:30 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:30 Filter is already there-color wheel unchanged 17:09:30 Received message from Master: op=Shutter serial=281351 17:09:30 Shutter LASER open 17:09:31 Received message from Camera: op=State serial=281353 17:09:31 GetSingleValue result=40 Value=cccccccc 17:09:31 SkyScan query 17:09:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:09:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:31 Parameters OK 17:09:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:31 Set A/D data flow result=40 17:09:31 Set A/D channel type result=40 17:09:31 Set A/D encoding result=40 17:09:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:31 Set channel filter=0.000000e+000 result=40 17:09:31 Config A/D Result=40 17:09:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:31 Get A/D filter: -9.255963e+061 result=40 17:09:31 Get A/D value=-858993460 result=40 17:09:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:31 Parameters OK 17:09:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:31 Set A/D data flow result=40 17:09:31 Set A/D channel type result=40 17:09:31 Set A/D encoding result=40 17:09:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:31 Set channel filter=0.000000e+000 result=40 17:09:31 Config A/D Result=40 17:09:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:31 Get A/D filter: -9.255963e+061 result=40 17:09:31 Get A/D value=-858993460 result=40 17:09:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:09:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:09:31 Aux= 17:09:31 Message to Camera, serial 281353 queued 17:09:40 Received message from Master: op=Shutter serial=281363 17:09:40 Shutter LASER close 17:09:40 Received message from Master: op=PointingHead serial=281367 17:09:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:09:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:09:40 Point started: ret=0 17:09:40 point_skyscan result=0 17:09:41 Check angles 17:09:41 SkyScan query 17:09:42 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.25<-21550 Statuses=0009 0009 17:09:42 Msec=0 True Az=135.975 Ze=-143.25 Az status=0009 Ze status=0009 17:09:42 Check angles 17:09:42 SkyScan query 17:09:43 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.28<-20152 Statuses=0009 0009 17:09:43 Msec=750 True Az=153.45 Ze=-122.28 Az status=0009 Ze status=0009 17:09:43 Check angles 17:09:43 SkyScan query 17:09:43 SkyScan query done: ret=0 az=170.925<-11395 ze=-101.385<-18759 Statuses=0009 0009 17:09:43 Msec=1500 True Az=170.925 Ze=-101.385 Az status=0009 Ze status=0009 17:09:43 Check angles 17:09:43 SkyScan query 17:09:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.4<-17360 Statuses=0008 0009 17:09:44 Msec=2250 True Az=175.995 Ze=-80.4 Az status=0008 Ze status=0009 17:09:44 Check angles 17:09:44 SkyScan query 17:09:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.46<-15964 Statuses=0008 0009 17:09:45 Msec=3000 True Az=175.995 Ze=-59.46 Az status=0008 Ze status=0009 17:09:45 Check angles 17:09:45 SkyScan query 17:09:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:09:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:09:46 Message to Master queued w/err=0: serial=281367 error=0 17:09:51 Received message from Master: op=Filter serial=281368 17:09:51 Color wheel filter change from 0 to 0 17:09:51 FLIGetFilterPos err=0 currentPosition=0 17:09:51 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:51 Filter is already there-color wheel unchanged 17:09:51 Received message from Master: op=Shutter serial=281369 17:09:51 Shutter LASER close 17:09:51 Received message from Camera: op=State serial=281371 17:09:51 GetSingleValue result=40 Value=cccccccc 17:09:51 SkyScan query 17:09:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:09:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:51 Parameters OK 17:09:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:51 Set A/D data flow result=40 17:09:51 Set A/D channel type result=40 17:09:51 Set A/D encoding result=40 17:09:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:51 Set channel filter=0.000000e+000 result=40 17:09:51 Config A/D Result=40 17:09:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:51 Get A/D filter: -9.255963e+061 result=40 17:09:51 Get A/D value=-858993460 result=40 17:09:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:51 Parameters OK 17:09:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:51 Set A/D data flow result=40 17:09:51 Set A/D channel type result=40 17:09:51 Set A/D encoding result=40 17:09:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:51 Set channel filter=0.000000e+000 result=40 17:09:51 Config A/D Result=40 17:09:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:51 Get A/D filter: -9.255963e+061 result=40 17:09:51 Get A/D value=-858993460 result=40 17:09:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:09:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:09:51 Aux= 17:09:51 Message to Camera, serial 281371 queued 17:10:28 Received message from Master: op=PointingHead serial=281384 17:10:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:10:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:10:29 Point started: ret=0 17:10:29 point_skyscan result=0 17:10:29 Check angles 17:10:29 SkyScan query 17:10:30 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.81<-13454 Statuses=0009 0009 17:10:30 Msec=0 True Az=152.955 Ze=-21.81 Az status=0009 Ze status=0009 17:10:30 Check angles 17:10:30 SkyScan query 17:10:31 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.81<-12054 Statuses=0009 0009 17:10:31 Msec=750 True Az=135.63 Ze=-0.81 Az status=0009 Ze status=0009 17:10:31 Check angles 17:10:31 SkyScan query 17:10:31 SkyScan query done: ret=0 az=118.065<-7871 ze=20.1<-10660 Statuses=0009 0009 17:10:31 Msec=1500 True Az=118.065 Ze=20.1 Az status=0009 Ze status=0009 17:10:32 Check angles 17:10:32 SkyScan query 17:10:32 SkyScan query done: ret=0 az=100.695<-6713 ze=41.13<-9258 Statuses=0009 0009 17:10:32 Msec=2250 True Az=100.695 Ze=41.13 Az status=0009 Ze status=0009 17:10:32 Check angles 17:10:32 SkyScan query 17:10:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 17:10:33 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 17:10:33 Check angles 17:10:33 SkyScan query 17:10:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:10:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:10:34 Message to Master queued w/err=0: serial=281384 error=0 17:10:39 Received message from Master: op=Filter serial=281385 17:10:39 Color wheel filter change from 0 to 0 17:10:39 FLIGetFilterPos err=0 currentPosition=0 17:10:39 FLIGetStepsRemaining err=0 RemainingSteps=0 17:10:39 Filter is already there-color wheel unchanged 17:10:39 Received message from Master: op=Shutter serial=281386 17:10:39 Shutter LASER close 17:10:39 Received message from Camera: op=State serial=281388 17:10:39 GetSingleValue result=40 Value=cccccccc 17:10:39 SkyScan query 17:10:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:10:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:40 Parameters OK 17:10:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:40 Set A/D data flow result=40 17:10:40 Set A/D channel type result=40 17:10:40 Set A/D encoding result=40 17:10:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:40 Set channel filter=0.000000e+000 result=40 17:10:40 Config A/D Result=40 17:10:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:40 Get A/D filter: -9.255963e+061 result=40 17:10:40 Get A/D value=-858993460 result=40 17:10:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:40 Parameters OK 17:10:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:40 Set A/D data flow result=40 17:10:40 Set A/D channel type result=40 17:10:40 Set A/D encoding result=40 17:10:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:40 Set channel filter=0.000000e+000 result=40 17:10:40 Config A/D Result=40 17:10:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:40 Get A/D filter: -9.255963e+061 result=40 17:10:40 Get A/D value=-858993460 result=40 17:10:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:10:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:10:40 Aux= 17:10:40 Message to Camera, serial 281388 queued 17:11:16 Received message from Master: op=PointingHead serial=281401 17:11:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:11:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:11:17 Point started: ret=0 17:11:17 point_skyscan result=0 17:11:18 Check angles 17:11:18 SkyScan query 17:11:18 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 17:11:18 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 17:11:18 Check angles 17:11:18 SkyScan query 17:11:19 SkyScan query done: ret=0 az=126.555<-8437 ze=38.505<-9433 Statuses=0009 0008 17:11:19 Msec=750 True Az=126.555 Ze=38.505 Az status=0009 Ze status=0008 17:11:19 Check angles 17:11:19 SkyScan query 17:11:20 SkyScan query done: ret=0 az=143.97<-9598 ze=38.505<-9433 Statuses=0009 0008 17:11:20 Msec=1500 True Az=143.97 Ze=38.505 Az status=0009 Ze status=0008 17:11:20 Check angles 17:11:20 SkyScan query 17:11:20 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 17:11:20 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 17:11:21 Check angles 17:11:21 SkyScan query 17:11:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:11:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:11:21 Check angles 17:11:21 SkyScan query 17:11:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:11:22 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:11:22 Message to Master queued w/err=0: serial=281401 error=0 17:11:27 Received message from Master: op=Filter serial=281402 17:11:27 Color wheel filter change from 0 to 0 17:11:27 FLIGetFilterPos err=0 currentPosition=0 17:11:27 FLIGetStepsRemaining err=0 RemainingSteps=0 17:11:27 Filter is already there-color wheel unchanged 17:11:27 Received message from Master: op=Shutter serial=281403 17:11:27 Shutter LASER close 17:11:27 Received message from Camera: op=State serial=281405 17:11:27 GetSingleValue result=40 Value=cccccccc 17:11:27 SkyScan query 17:11:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:11:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:28 Parameters OK 17:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:28 Set A/D data flow result=40 17:11:28 Set A/D channel type result=40 17:11:28 Set A/D encoding result=40 17:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:28 Set channel filter=0.000000e+000 result=40 17:11:28 Config A/D Result=40 17:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:28 Get A/D filter: -9.255963e+061 result=40 17:11:28 Get A/D value=-858993460 result=40 17:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:28 Parameters OK 17:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:28 Set A/D data flow result=40 17:11:28 Set A/D channel type result=40 17:11:28 Set A/D encoding result=40 17:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:28 Set channel filter=0.000000e+000 result=40 17:11:28 Config A/D Result=40 17:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:28 Get A/D filter: -9.255963e+061 result=40 17:11:28 Get A/D value=-858993460 result=40 17:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:11:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:11:28 Aux= 17:11:28 Message to Camera, serial 281405 queued 17:12:04 Received message from Master: op=PointingHead serial=281418 17:12:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:12:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:12:05 Point started: ret=0 17:12:05 point_skyscan result=0 17:12:06 Check angles 17:12:06 SkyScan query 17:12:06 SkyScan query done: ret=0 az=152.865<-10191 ze=8.475<-11435 Statuses=0009 0009 17:12:06 Msec=0 True Az=152.865 Ze=8.475 Az status=0009 Ze status=0009 17:12:06 Check angles 17:12:06 SkyScan query 17:12:07 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.465<-12831 Statuses=0009 0009 17:12:07 Msec=750 True Az=135.36 Ze=-12.465 Az status=0009 Ze status=0009 17:12:07 Check angles 17:12:07 SkyScan query 17:12:08 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.945<-14263 Statuses=0009 0009 17:12:08 Msec=1500 True Az=117.54 Ze=-33.945 Az status=0009 Ze status=0009 17:12:08 Check angles 17:12:08 SkyScan query 17:12:08 SkyScan query done: ret=0 az=99.72<-6648 ze=-51.57<-15438 Statuses=0009 0009 17:12:08 Msec=2250 True Az=99.72 Ze=-51.57 Az status=0009 Ze status=0009 17:12:09 Check angles 17:12:09 SkyScan query 17:12:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 17:12:09 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 17:12:09 Check angles 17:12:09 SkyScan query 17:12:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:12:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:12:10 Message to Master queued w/err=0: serial=281418 error=0 17:12:15 Received message from Master: op=Filter serial=281419 17:12:15 Color wheel filter change from 0 to 0 17:12:15 FLIGetFilterPos err=0 currentPosition=0 17:12:15 FLIGetStepsRemaining err=0 RemainingSteps=0 17:12:15 Filter is already there-color wheel unchanged 17:12:15 Received message from Master: op=Shutter serial=281420 17:12:15 Shutter LASER close 17:12:15 Received message from Camera: op=State serial=281422 17:12:15 GetSingleValue result=40 Value=cccccccc 17:12:15 SkyScan query 17:12:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:12:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:16 Parameters OK 17:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:16 Set A/D data flow result=40 17:12:16 Set A/D channel type result=40 17:12:16 Set A/D encoding result=40 17:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:16 Set channel filter=0.000000e+000 result=40 17:12:16 Config A/D Result=40 17:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:16 Get A/D filter: -9.255963e+061 result=40 17:12:16 Get A/D value=-858993460 result=40 17:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:16 Parameters OK 17:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:16 Set A/D data flow result=40 17:12:16 Set A/D channel type result=40 17:12:16 Set A/D encoding result=40 17:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:16 Set channel filter=0.000000e+000 result=40 17:12:16 Config A/D Result=40 17:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:16 Get A/D filter: -9.255963e+061 result=40 17:12:16 Get A/D value=-858993460 result=40 17:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:12:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:12:16 Aux= 17:12:16 Message to Camera, serial 281422 queued 17:12:53 Received message from Master: op=PointingHead serial=281435 17:12:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:12:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:12:53 Point started: ret=0 17:12:53 point_skyscan result=0 17:12:54 Check angles 17:12:54 SkyScan query 17:12:54 SkyScan query done: ret=0 az=109.425<-7295 ze=-81.825<-17455 Statuses=0009 0009 17:12:54 Msec=0 True Az=109.425 Ze=-81.825 Az status=0009 Ze status=0009 17:12:54 Check angles 17:12:54 SkyScan query 17:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 17:12:55 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 17:12:55 Check angles 17:12:55 SkyScan query 17:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 17:12:56 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 17:12:56 Check angles 17:12:56 SkyScan query 17:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 17:12:57 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 17:12:57 Check angles 17:12:57 SkyScan query 17:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 17:12:57 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 17:12:57 Check angles 17:12:57 SkyScan query 17:12:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:12:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:12:58 Message to Master queued w/err=0: serial=281435 error=0 17:13:03 Received message from Master: op=Filter serial=281436 17:13:03 Color wheel filter change from 0 to 0 17:13:03 FLIGetFilterPos err=0 currentPosition=0 17:13:03 FLIGetStepsRemaining err=0 RemainingSteps=0 17:13:03 Filter is already there-color wheel unchanged 17:13:03 Received message from Master: op=Shutter serial=281437 17:13:03 Shutter LASER open 17:13:03 Received message from Camera: op=State serial=281439 17:13:03 GetSingleValue result=40 Value=cccccccc 17:13:03 SkyScan query 17:13:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:13:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:04 Parameters OK 17:13:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:04 Set A/D data flow result=40 17:13:04 Set A/D channel type result=40 17:13:04 Set A/D encoding result=40 17:13:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:04 Set channel filter=0.000000e+000 result=40 17:13:04 Config A/D Result=40 17:13:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:04 Get A/D filter: -9.255963e+061 result=40 17:13:04 Get A/D value=-858993460 result=40 17:13:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:04 Parameters OK 17:13:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:04 Set A/D data flow result=40 17:13:04 Set A/D channel type result=40 17:13:04 Set A/D encoding result=40 17:13:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:04 Set channel filter=0.000000e+000 result=40 17:13:04 Config A/D Result=40 17:13:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:04 Get A/D filter: -9.255963e+061 result=40 17:13:04 Get A/D value=-858993460 result=40 17:13:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:13:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:13:04 Aux= 17:13:04 Message to Camera, serial 281439 queued 17:13:12 Received message from Master: op=Shutter serial=281449 17:13:12 Shutter LASER close 17:13:13 Received message from Master: op=PointingHead serial=281453 17:13:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:13:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:13:13 Point started: ret=0 17:13:13 point_skyscan result=0 17:13:14 Check angles 17:13:14 SkyScan query 17:13:15 SkyScan query done: ret=0 az=89.79<-5986 ze=157.185<-1521 Statuses=0009 0009 17:13:15 Msec=0 True Az=89.79 Ze=157.185 Az status=0009 Ze status=0009 17:13:15 Check angles 17:13:15 SkyScan query 17:13:15 SkyScan query done: ret=0 az=72.3<-4820 ze=136.23<-2918 Statuses=0009 0009 17:13:15 Msec=750 True Az=72.3 Ze=136.23 Az status=0009 Ze status=0009 17:13:15 Check angles 17:13:15 SkyScan query 17:13:16 SkyScan query done: ret=0 az=54.795<-3653 ze=115.29<-4314 Statuses=0009 0009 17:13:16 Msec=1500 True Az=54.795 Ze=115.29 Az status=0009 Ze status=0009 17:13:16 Check angles 17:13:16 SkyScan query 17:13:17 SkyScan query done: ret=0 az=40.98<-2732 ze=94.32<-5712 Statuses=0009 0009 17:13:17 Msec=2250 True Az=40.98 Ze=94.32 Az status=0009 Ze status=0009 17:13:17 Check angles 17:13:17 SkyScan query 17:13:18 SkyScan query done: ret=0 az=40.995<-2733 ze=73.35<-7110 Statuses=0008 0009 17:13:18 Msec=3000 True Az=40.995 Ze=73.35 Az status=0008 Ze status=0009 17:13:18 Check angles 17:13:18 SkyScan query 17:13:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 17:13:18 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 17:13:18 Check angles 17:13:18 SkyScan query 17:13:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:13:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:13:19 Message to Master queued w/err=0: serial=281453 error=0 17:13:24 Received message from Master: op=Filter serial=281454 17:13:24 Color wheel filter change from 0 to 0 17:13:24 FLIGetFilterPos err=0 currentPosition=0 17:13:24 FLIGetStepsRemaining err=0 RemainingSteps=0 17:13:24 Filter is already there-color wheel unchanged 17:13:24 Received message from Master: op=Shutter serial=281455 17:13:24 Shutter LASER close 17:13:24 Received message from Camera: op=State serial=281457 17:13:24 GetSingleValue result=40 Value=cccccccc 17:13:24 SkyScan query 17:13:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:13:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:25 Parameters OK 17:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:25 Set A/D data flow result=40 17:13:25 Set A/D channel type result=40 17:13:25 Set A/D encoding result=40 17:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:25 Set channel filter=0.000000e+000 result=40 17:13:25 Config A/D Result=40 17:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:25 Get A/D filter: -9.255963e+061 result=40 17:13:25 Get A/D value=-858993460 result=40 17:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:25 Parameters OK 17:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:25 Set A/D data flow result=40 17:13:25 Set A/D channel type result=40 17:13:25 Set A/D encoding result=40 17:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:25 Set channel filter=0.000000e+000 result=40 17:13:25 Config A/D Result=40 17:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:25 Get A/D filter: -9.255963e+061 result=40 17:13:25 Get A/D value=-858993460 result=40 17:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:13:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:13:25 Aux= 17:13:25 Message to Camera, serial 281457 queued 17:14:02 Received message from Master: op=PointingHead serial=281470 17:14:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:14:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:14:02 Point started: ret=0 17:14:02 point_skyscan result=0 17:14:03 Check angles 17:14:03 SkyScan query 17:14:04 SkyScan query done: ret=0 az=64.185<-4279 ze=66.54<-7564 Statuses=0009 0008 17:14:04 Msec=0 True Az=64.185 Ze=66.54 Az status=0009 Ze status=0008 17:14:04 Check angles 17:14:04 SkyScan query 17:14:04 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 17:14:04 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 17:14:04 Check angles 17:14:04 SkyScan query 17:14:05 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 17:14:05 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 17:14:05 Check angles 17:14:05 SkyScan query 17:14:06 SkyScan query done: ret=0 az=116.55<-7770 ze=66.495<-7567 Statuses=0009 0008 17:14:06 Msec=2250 True Az=116.55 Ze=66.495 Az status=0009 Ze status=0008 17:14:06 Check angles 17:14:06 SkyScan query 17:14:07 SkyScan query done: ret=0 az=133.95<-8930 ze=66.495<-7567 Statuses=0009 0008 17:14:07 Msec=3000 True Az=133.95 Ze=66.495 Az status=0009 Ze status=0008 17:14:07 Check angles 17:14:07 SkyScan query 17:14:07 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 17:14:07 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 17:14:07 Check angles 17:14:07 SkyScan query 17:14:08 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:14:08 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:14:08 Message to Master queued w/err=0: serial=281470 error=0 17:14:13 Received message from Master: op=Filter serial=281471 17:14:13 Color wheel filter change from 0 to 0 17:14:13 FLIGetFilterPos err=0 currentPosition=0 17:14:13 FLIGetStepsRemaining err=0 RemainingSteps=0 17:14:13 Filter is already there-color wheel unchanged 17:14:13 Received message from Master: op=Shutter serial=281472 17:14:13 Shutter LASER close 17:14:13 Received message from Camera: op=State serial=281474 17:14:13 GetSingleValue result=40 Value=cccccccc 17:14:13 SkyScan query 17:14:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:14:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:14 Parameters OK 17:14:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:14 Set A/D data flow result=40 17:14:14 Set A/D channel type result=40 17:14:14 Set A/D encoding result=40 17:14:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:14 Set channel filter=0.000000e+000 result=40 17:14:14 Config A/D Result=40 17:14:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:14 Get A/D filter: -9.255963e+061 result=40 17:14:14 Get A/D value=-858993460 result=40 17:14:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:14 Parameters OK 17:14:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:14 Set A/D data flow result=40 17:14:14 Set A/D channel type result=40 17:14:14 Set A/D encoding result=40 17:14:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:14 Set channel filter=0.000000e+000 result=40 17:14:14 Config A/D Result=40 17:14:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:14 Get A/D filter: -9.255963e+061 result=40 17:14:14 Get A/D value=-858993460 result=40 17:14:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:14:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:14:14 Aux= 17:14:14 Message to Camera, serial 281474 queued 17:14:51 Received message from Master: op=PointingHead serial=281487 17:14:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:14:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:14:51 Point started: ret=0 17:14:51 point_skyscan result=0 17:14:52 Check angles 17:14:52 SkyScan query 17:14:52 SkyScan query done: ret=0 az=134.85<-8990 ze=36.585<-9561 Statuses=0009 0009 17:14:52 Msec=0 True Az=134.85 Ze=36.585 Az status=0009 Ze status=0009 17:14:52 Check angles 17:14:52 SkyScan query 17:14:53 SkyScan query done: ret=0 az=116.985<-7799 ze=15.195<-10987 Statuses=0009 0009 17:14:53 Msec=750 True Az=116.985 Ze=15.195 Az status=0009 Ze status=0009 17:14:53 Check angles 17:14:53 SkyScan query 17:14:54 SkyScan query done: ret=0 az=99.615<-6641 ze=-5.805<-12387 Statuses=0009 0009 17:14:54 Msec=1500 True Az=99.615 Ze=-5.805 Az status=0009 Ze status=0009 17:14:54 Check angles 17:14:54 SkyScan query 17:14:55 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.775<-13785 Statuses=0009 0009 17:14:55 Msec=2250 True Az=82.125 Ze=-26.775 Az status=0009 Ze status=0009 17:14:55 Check angles 17:14:55 SkyScan query 17:14:55 SkyScan query done: ret=0 az=64.26<-4284 ze=-38.58<-14572 Statuses=0009 0008 17:14:55 Msec=3000 True Az=64.26 Ze=-38.58 Az status=0009 Ze status=0008 17:14:56 Check angles 17:14:56 SkyScan query 17:14:56 SkyScan query done: ret=0 az=46.455<-3097 ze=-38.52<-14568 Statuses=0009 0008 17:14:56 Msec=3750 True Az=46.455 Ze=-38.52 Az status=0009 Ze status=0008 17:14:56 Check angles 17:14:56 SkyScan query 17:14:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:14:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:14:57 Message to Master queued w/err=0: serial=281487 error=0 17:15:02 Received message from Master: op=Filter serial=281488 17:15:02 Color wheel filter change from 0 to 0 17:15:02 FLIGetFilterPos err=0 currentPosition=0 17:15:02 FLIGetStepsRemaining err=0 RemainingSteps=0 17:15:02 Filter is already there-color wheel unchanged 17:15:02 Received message from Master: op=Shutter serial=281489 17:15:02 Shutter LASER close 17:15:02 Received message from Camera: op=State serial=281491 17:15:02 GetSingleValue result=40 Value=cccccccc 17:15:02 SkyScan query 17:15:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:03 Parameters OK 17:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:03 Set A/D data flow result=40 17:15:03 Set A/D channel type result=40 17:15:03 Set A/D encoding result=40 17:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:03 Set channel filter=0.000000e+000 result=40 17:15:03 Config A/D Result=40 17:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:03 Get A/D filter: -9.255963e+061 result=40 17:15:03 Get A/D value=-858993460 result=40 17:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:03 Parameters OK 17:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:03 Set A/D data flow result=40 17:15:03 Set A/D channel type result=40 17:15:03 Set A/D encoding result=40 17:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:03 Set channel filter=0.000000e+000 result=40 17:15:03 Config A/D Result=40 17:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:03 Get A/D filter: -9.255963e+061 result=40 17:15:03 Get A/D value=-858993460 result=40 17:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:15:03 Aux= 17:15:03 Message to Camera, serial 281491 queued 17:15:27 Received message from Master: op=Identify serial=281492 17:15:39 Received message from Master: op=PointingHead serial=281507 17:15:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:15:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:15:40 Point started: ret=0 17:15:40 point_skyscan result=0 17:15:41 Check angles 17:15:41 SkyScan query 17:15:41 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.565<-16571 Statuses=0009 0009 17:15:41 Msec=0 True Az=64.185 Ze=-68.565 Az status=0009 Ze status=0009 17:15:41 Check angles 17:15:41 SkyScan query 17:15:42 SkyScan query done: ret=0 az=81.69<-5446 ze=-89.46<-17964 Statuses=0009 0009 17:15:42 Msec=750 True Az=81.69 Ze=-89.46 Az status=0009 Ze status=0009 17:15:42 Check angles 17:15:42 SkyScan query 17:15:43 SkyScan query done: ret=0 az=99.57<-6638 ze=-110.835<-19389 Statuses=0009 0009 17:15:43 Msec=1500 True Az=99.57 Ze=-110.835 Az status=0009 Ze status=0009 17:15:43 Check angles 17:15:43 SkyScan query 17:15:43 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.76<-20784 Statuses=0009 0009 17:15:43 Msec=2250 True Az=116.985 Ze=-131.76 Az status=0009 Ze status=0009 17:15:44 Check angles 17:15:44 SkyScan query 17:15:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 17:15:44 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 17:15:44 Check angles 17:15:44 SkyScan query 17:15:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 17:15:45 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 17:15:45 Message to Master queued w/err=0: serial=281507 error=0 17:15:50 Received message from Master: op=Filter serial=281508 17:15:50 Color wheel filter change from 0 to 0 17:15:50 FLIGetFilterPos err=0 currentPosition=0 17:15:50 FLIGetStepsRemaining err=0 RemainingSteps=0 17:15:50 Filter is already there-color wheel unchanged 17:15:50 Received message from Master: op=Shutter serial=281509 17:15:50 Shutter LASER close 17:15:50 Received message from Camera: op=State serial=281511 17:15:50 GetSingleValue result=40 Value=cccccccc 17:15:50 SkyScan query 17:15:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:15:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:51 Parameters OK 17:15:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:51 Set A/D data flow result=40 17:15:51 Set A/D channel type result=40 17:15:51 Set A/D encoding result=40 17:15:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:51 Set channel filter=0.000000e+000 result=40 17:15:51 Config A/D Result=40 17:15:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:51 Get A/D filter: -9.255963e+061 result=40 17:15:51 Get A/D value=-858993460 result=40 17:15:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:51 Parameters OK 17:15:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:51 Set A/D data flow result=40 17:15:51 Set A/D channel type result=40 17:15:51 Set A/D encoding result=40 17:15:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:51 Set channel filter=0.000000e+000 result=40 17:15:51 Config A/D Result=40 17:15:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:51 Get A/D filter: -9.255963e+061 result=40 17:15:51 Get A/D value=-858993460 result=40 [UTC 2018-12-19 17:15:51] 17:15:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:15:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:15:51 Aux= 17:15:51 Message to Camera, serial 281511 queued [UTC 2018-12-19 17:15:52] 17:16:27 Received message from Master: op=PointingHead serial=281523 17:16:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:16:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:16:27 Point started: ret=0 17:16:27 point_skyscan result=0 17:16:28 Check angles 17:16:28 SkyScan query 17:16:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 17:16:28 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 17:16:29 Check angles 17:16:29 SkyScan query 17:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:16:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:16:29 Message to Master queued w/err=0: serial=281523 error=0 17:16:34 Received message from Master: op=Filter serial=281524 17:16:34 Color wheel filter change from 0 to 0 17:16:34 FLIGetFilterPos err=0 currentPosition=0 17:16:34 FLIGetStepsRemaining err=0 RemainingSteps=0 17:16:34 Filter is already there-color wheel unchanged 17:16:34 Received message from Master: op=Shutter serial=281525 17:16:34 Shutter LASER open 17:16:34 Received message from Camera: op=State serial=281527 17:16:34 GetSingleValue result=40 Value=cccccccc 17:16:34 SkyScan query 17:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:16:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:35 Parameters OK 17:16:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:35 Set A/D data flow result=40 17:16:35 Set A/D channel type result=40 17:16:35 Set A/D encoding result=40 17:16:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:35 Set channel filter=0.000000e+000 result=40 17:16:35 Config A/D Result=40 17:16:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:35 Get A/D filter: -9.255963e+061 result=40 17:16:35 Get A/D value=-858993460 result=40 17:16:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:35 Parameters OK 17:16:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:35 Set A/D data flow result=40 17:16:35 Set A/D channel type result=40 17:16:35 Set A/D encoding result=40 17:16:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:35 Set channel filter=0.000000e+000 result=40 17:16:35 Config A/D Result=40 17:16:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:35 Get A/D filter: -9.255963e+061 result=40 17:16:35 Get A/D value=-858993460 result=40 17:16:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:16:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:16:35 Aux= 17:16:35 Message to Camera, serial 281527 queued 17:16:43 Received message from Master: op=Shutter serial=281537 17:16:43 Shutter LASER close 17:16:44 Received message from Master: op=PointingHead serial=281541 17:16:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:16:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:16:44 Point started: ret=0 17:16:44 point_skyscan result=0 17:16:45 Check angles 17:16:45 SkyScan query 17:16:46 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.695<-21513 Statuses=0009 0009 17:16:46 Msec=0 True Az=136.365 Ze=-142.695 Az status=0009 Ze status=0009 17:16:46 Check angles 17:16:46 SkyScan query 17:16:46 SkyScan query done: ret=0 az=153.915<-10261 ze=-121.77<-20118 Statuses=0009 0009 17:16:46 Msec=750 True Az=153.915 Ze=-121.77 Az status=0009 Ze status=0009 17:16:47 Check angles 17:16:47 SkyScan query 17:16:47 SkyScan query done: ret=0 az=171.345<-11423 ze=-100.74<-18716 Statuses=0009 0009 17:16:47 Msec=1500 True Az=171.345 Ze=-100.74 Az status=0009 Ze status=0009 17:16:47 Check angles 17:16:47 SkyScan query 17:16:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.35<-17290 Statuses=0008 0009 17:16:48 Msec=2250 True Az=175.995 Ze=-79.35 Az status=0008 Ze status=0009 17:16:48 Check angles 17:16:48 SkyScan query 17:16:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.395<-15893 Statuses=0008 0009 17:16:49 Msec=3000 True Az=176.01 Ze=-58.395 Az status=0008 Ze status=0009 17:16:49 Check angles 17:16:49 SkyScan query 17:16:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 17:16:49 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 17:16:49 Message to Master queued w/err=0: serial=281541 error=0 17:16:54 Received message from Master: op=Filter serial=281542 17:16:54 Color wheel filter change from 0 to 0 17:16:54 FLIGetFilterPos err=0 currentPosition=0 17:16:54 FLIGetStepsRemaining err=0 RemainingSteps=0 17:16:54 Filter is already there-color wheel unchanged 17:16:55 Received message from Master: op=Shutter serial=281543 17:16:55 Shutter LASER close 17:16:55 Received message from Camera: op=State serial=281545 17:16:55 GetSingleValue result=40 Value=cccccccc 17:16:55 SkyScan query 17:16:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:16:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:55 Parameters OK 17:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:55 Set A/D data flow result=40 17:16:55 Set A/D channel type result=40 17:16:55 Set A/D encoding result=40 17:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:55 Set channel filter=0.000000e+000 result=40 17:16:55 Config A/D Result=40 17:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:55 Get A/D filter: -9.255963e+061 result=40 17:16:55 Get A/D value=-858993460 result=40 17:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:55 Parameters OK 17:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:55 Set A/D data flow result=40 17:16:55 Set A/D channel type result=40 17:16:55 Set A/D encoding result=40 17:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:55 Set channel filter=0.000000e+000 result=40 17:16:55 Config A/D Result=40 17:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:55 Get A/D filter: -9.255963e+061 result=40 17:16:55 Get A/D value=-858993460 result=40 17:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:16:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:16:55 Aux= 17:16:55 Message to Camera, serial 281545 queued 17:17:32 Received message from Master: op=PointingHead serial=281558 17:17:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:17:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:17:33 Point started: ret=0 17:17:33 point_skyscan result=0 17:17:33 Check angles 17:17:33 SkyScan query 17:17:34 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.705<-13447 Statuses=0009 0009 17:17:34 Msec=0 True Az=152.97 Ze=-21.705 Az status=0009 Ze status=0009 17:17:34 Check angles 17:17:34 SkyScan query 17:17:35 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.735<-12049 Statuses=0009 0009 17:17:35 Msec=750 True Az=135.405 Ze=-0.735 Az status=0009 Ze status=0009 17:17:35 Check angles 17:17:35 SkyScan query 17:17:36 SkyScan query done: ret=0 az=118.02<-7868 ze=20.205<-10653 Statuses=0009 0009 17:17:36 Msec=1500 True Az=118.02 Ze=20.205 Az status=0009 Ze status=0009 17:17:36 Check angles 17:17:36 SkyScan query 17:17:36 SkyScan query done: ret=0 az=100.56<-6704 ze=41.205<-9253 Statuses=0009 0009 17:17:36 Msec=2250 True Az=100.56 Ze=41.205 Az status=0009 Ze status=0009 17:17:36 Check angles 17:17:36 SkyScan query 17:17:37 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 17:17:37 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 17:17:37 Check angles 17:17:37 SkyScan query 17:17:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:17:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:17:38 Message to Master queued w/err=0: serial=281558 error=0 17:17:43 Received message from Master: op=Filter serial=281559 17:17:43 Color wheel filter change from 0 to 0 17:17:43 FLIGetFilterPos err=0 currentPosition=0 17:17:43 FLIGetStepsRemaining err=0 RemainingSteps=0 17:17:43 Filter is already there-color wheel unchanged 17:17:43 Received message from Master: op=Shutter serial=281560 17:17:43 Shutter LASER close 17:17:43 Received message from Camera: op=State serial=281562 17:17:43 GetSingleValue result=40 Value=cccccccc 17:17:43 SkyScan query 17:17:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:17:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:44 Parameters OK 17:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:44 Set A/D data flow result=40 17:17:44 Set A/D channel type result=40 17:17:44 Set A/D encoding result=40 17:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:44 Set channel filter=0.000000e+000 result=40 17:17:44 Config A/D Result=40 17:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:44 Get A/D filter: -9.255963e+061 result=40 17:17:44 Get A/D value=-858993460 result=40 17:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:44 Parameters OK 17:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:44 Set A/D data flow result=40 17:17:44 Set A/D channel type result=40 17:17:44 Set A/D encoding result=40 17:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:44 Set channel filter=0.000000e+000 result=40 17:17:44 Config A/D Result=40 17:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:44 Get A/D filter: -9.255963e+061 result=40 17:17:44 Get A/D value=-858993460 result=40 17:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:17:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:17:44 Aux= 17:17:44 Message to Camera, serial 281562 queued 17:18:20 Received message from Master: op=PointingHead serial=281575 17:18:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:18:20 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:18:21 Point started: ret=0 17:18:21 point_skyscan result=0 17:18:21 Check angles 17:18:21 SkyScan query 17:18:22 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 17:18:22 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 17:18:22 Check angles 17:18:22 SkyScan query 17:18:23 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 17:18:23 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 17:18:23 Check angles 17:18:23 SkyScan query 17:18:24 SkyScan query done: ret=0 az=144.06<-9604 ze=38.505<-9433 Statuses=0009 0008 17:18:24 Msec=1500 True Az=144.06 Ze=38.505 Az status=0009 Ze status=0008 17:18:24 Check angles 17:18:24 SkyScan query 17:18:24 SkyScan query done: ret=0 az=161.49<-10766 ze=38.505<-9433 Statuses=0009 0008 17:18:24 Msec=2250 True Az=161.49 Ze=38.505 Az status=0009 Ze status=0008 17:18:24 Check angles 17:18:24 SkyScan query 17:18:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 17:18:25 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 17:18:25 Check angles 17:18:25 SkyScan query 17:18:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:18:26 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:18:26 Message to Master queued w/err=0: serial=281575 error=0 17:18:31 Received message from Master: op=Filter serial=281576 17:18:31 Color wheel filter change from 0 to 0 17:18:31 FLIGetFilterPos err=0 currentPosition=0 17:18:31 FLIGetStepsRemaining err=0 RemainingSteps=0 17:18:31 Filter is already there-color wheel unchanged 17:18:31 Received message from Master: op=Shutter serial=281577 17:18:31 Shutter LASER close 17:18:31 Received message from Camera: op=State serial=281579 17:18:31 GetSingleValue result=40 Value=cccccccc 17:18:31 SkyScan query 17:18:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:18:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:32 Parameters OK 17:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:32 Set A/D data flow result=40 17:18:32 Set A/D channel type result=40 17:18:32 Set A/D encoding result=40 17:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:32 Set channel filter=0.000000e+000 result=40 17:18:32 Config A/D Result=40 17:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:32 Get A/D filter: -9.255963e+061 result=40 17:18:32 Get A/D value=-858993460 result=40 17:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:32 Parameters OK 17:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:32 Set A/D data flow result=40 17:18:32 Set A/D channel type result=40 17:18:32 Set A/D encoding result=40 17:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:32 Set channel filter=0.000000e+000 result=40 17:18:32 Config A/D Result=40 17:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:32 Get A/D filter: -9.255963e+061 result=40 17:18:32 Get A/D value=-858993460 result=40 17:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:18:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:18:32 Aux= 17:18:32 Message to Camera, serial 281579 queued 17:19:08 Received message from Master: op=PointingHead serial=281592 17:19:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:19:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:19:09 Point started: ret=0 17:19:09 point_skyscan result=0 17:19:10 Check angles 17:19:10 SkyScan query 17:19:10 SkyScan query done: ret=0 az=152.94<-10196 ze=8.76<-11416 Statuses=0009 0009 17:19:10 Msec=0 True Az=152.94 Ze=8.76 Az status=0009 Ze status=0009 17:19:10 Check angles 17:19:10 SkyScan query 17:19:11 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.645<-12843 Statuses=0009 0009 17:19:11 Msec=750 True Az=135.24 Ze=-12.645 Az status=0009 Ze status=0009 17:19:11 Check angles 17:19:11 SkyScan query 17:19:12 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.675<-14245 Statuses=0009 0009 17:19:12 Msec=1500 True Az=117.615 Ze=-33.675 Az status=0009 Ze status=0009 17:19:12 Check angles 17:19:12 SkyScan query 17:19:12 SkyScan query done: ret=0 az=100.35<-6690 ze=-51.57<-15438 Statuses=0009 0009 17:19:12 Msec=2250 True Az=100.35 Ze=-51.57 Az status=0009 Ze status=0009 17:19:13 Check angles 17:19:13 SkyScan query 17:19:13 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 17:19:13 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 17:19:13 Check angles 17:19:13 SkyScan query 17:19:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:19:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:19:14 Message to Master queued w/err=0: serial=281592 error=0 17:19:19 Received message from Master: op=Filter serial=281593 17:19:19 Color wheel filter change from 0 to 0 17:19:19 FLIGetFilterPos err=0 currentPosition=0 17:19:19 FLIGetStepsRemaining err=0 RemainingSteps=0 17:19:19 Filter is already there-color wheel unchanged 17:19:19 Received message from Master: op=Shutter serial=281594 17:19:19 Shutter LASER close 17:19:19 Received message from Camera: op=State serial=281596 17:19:19 GetSingleValue result=40 Value=cccccccc 17:19:19 SkyScan query 17:19:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:19:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:20 Parameters OK 17:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:20 Set A/D data flow result=40 17:19:20 Set A/D channel type result=40 17:19:20 Set A/D encoding result=40 17:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:20 Set channel filter=0.000000e+000 result=40 17:19:20 Config A/D Result=40 17:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:20 Get A/D filter: -9.255963e+061 result=40 17:19:20 Get A/D value=-858993460 result=40 17:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:20 Parameters OK 17:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:20 Set A/D data flow result=40 17:19:20 Set A/D channel type result=40 17:19:20 Set A/D encoding result=40 17:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:20 Set channel filter=0.000000e+000 result=40 17:19:20 Config A/D Result=40 17:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:20 Get A/D filter: -9.255963e+061 result=40 17:19:20 Get A/D value=-858993460 result=40 17:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:19:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:19:20 Aux= 17:19:20 Message to Camera, serial 281596 queued 17:19:57 Received message from Master: op=PointingHead serial=281609 17:19:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:19:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:19:57 Point started: ret=0 17:19:57 point_skyscan result=0 17:19:58 Check angles 17:19:58 SkyScan query 17:19:58 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.405<-17427 Statuses=0009 0009 17:19:58 Msec=0 True Az=109.17 Ze=-81.405 Az status=0009 Ze status=0009 17:19:58 Check angles 17:19:58 SkyScan query 17:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 17:19:59 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 17:19:59 Check angles 17:19:59 SkyScan query 17:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.3<-20220 Statuses=0008 0009 17:20:00 Msec=1500 True Az=112.995 Ze=-123.3 Az status=0008 Ze status=0009 17:20:00 Check angles 17:20:00 SkyScan query 17:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.255<-21617 Statuses=0008 0009 17:20:00 Msec=2250 True Az=112.995 Ze=-144.255 Az status=0008 Ze status=0009 17:20:01 Check angles 17:20:01 SkyScan query 17:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 17:20:01 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 17:20:01 Check angles 17:20:01 SkyScan query 17:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:20:02 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:20:02 Message to Master queued w/err=0: serial=281609 error=0 17:20:07 Received message from Master: op=Filter serial=281610 17:20:07 Color wheel filter change from 0 to 0 17:20:07 FLIGetFilterPos err=0 currentPosition=0 17:20:07 FLIGetStepsRemaining err=0 RemainingSteps=0 17:20:07 Filter is already there-color wheel unchanged 17:20:07 Received message from Master: op=Shutter serial=281611 17:20:07 Shutter LASER open 17:20:07 Received message from Camera: op=State serial=281613 17:20:07 GetSingleValue result=40 Value=cccccccc 17:20:07 SkyScan query 17:20:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:20:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:08 Parameters OK 17:20:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:08 Set A/D data flow result=40 17:20:08 Set A/D channel type result=40 17:20:08 Set A/D encoding result=40 17:20:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:08 Set channel filter=0.000000e+000 result=40 17:20:08 Config A/D Result=40 17:20:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:08 Get A/D filter: -9.255963e+061 result=40 17:20:08 Get A/D value=-858993460 result=40 17:20:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:08 Parameters OK 17:20:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:08 Set A/D data flow result=40 17:20:08 Set A/D channel type result=40 17:20:08 Set A/D encoding result=40 17:20:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:08 Set channel filter=0.000000e+000 result=40 17:20:08 Config A/D Result=40 17:20:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:08 Get A/D filter: -9.255963e+061 result=40 17:20:08 Get A/D value=-858993460 result=40 17:20:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:20:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:20:08 Aux= 17:20:08 Message to Camera, serial 281613 queued 17:20:16 Received message from Master: op=Shutter serial=281623 17:20:16 Shutter LASER close 17:20:17 Received message from Master: op=PointingHead serial=281627 17:20:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:20:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:20:17 Point started: ret=0 17:20:17 point_skyscan result=0 17:20:18 Check angles 17:20:18 SkyScan query 17:20:19 SkyScan query done: ret=0 az=89.64<-5976 ze=157.05<-1530 Statuses=0009 0009 17:20:19 Msec=0 True Az=89.64 Ze=157.05 Az status=0009 Ze status=0009 17:20:19 Check angles 17:20:19 SkyScan query 17:20:19 SkyScan query done: ret=0 az=72.255<-4817 ze=136.125<-2925 Statuses=0009 0009 17:20:19 Msec=750 True Az=72.255 Ze=136.125 Az status=0009 Ze status=0009 17:20:19 Check angles 17:20:19 SkyScan query 17:20:20 SkyScan query done: ret=0 az=54.795<-3653 ze=115.155<-4323 Statuses=0009 0009 17:20:20 Msec=1500 True Az=54.795 Ze=115.155 Az status=0009 Ze status=0009 17:20:20 Check angles 17:20:20 SkyScan query 17:20:21 SkyScan query done: ret=0 az=40.98<-2732 ze=94.185<-5721 Statuses=0009 0009 17:20:21 Msec=2250 True Az=40.98 Ze=94.185 Az status=0009 Ze status=0009 17:20:21 Check angles 17:20:21 SkyScan query 17:20:22 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 17:20:22 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 17:20:22 Check angles 17:20:22 SkyScan query 17:20:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 17:20:22 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 17:20:22 Check angles 17:20:22 SkyScan query 17:20:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:20:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:20:23 Message to Master queued w/err=0: serial=281627 error=0 17:20:28 Received message from Master: op=Filter serial=281628 17:20:28 Color wheel filter change from 0 to 0 17:20:28 FLIGetFilterPos err=0 currentPosition=0 17:20:28 FLIGetStepsRemaining err=0 RemainingSteps=0 17:20:28 Filter is already there-color wheel unchanged 17:20:28 Received message from Master: op=Shutter serial=281629 17:20:28 Shutter LASER close 17:20:28 Received message from Camera: op=State serial=281631 17:20:28 GetSingleValue result=40 Value=cccccccc 17:20:28 SkyScan query 17:20:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:20:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:29 Parameters OK 17:20:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:29 Set A/D data flow result=40 17:20:29 Set A/D channel type result=40 17:20:29 Set A/D encoding result=40 17:20:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:29 Set channel filter=0.000000e+000 result=40 17:20:29 Config A/D Result=40 17:20:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:29 Get A/D filter: -9.255963e+061 result=40 17:20:29 Get A/D value=-858993460 result=40 17:20:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:29 Parameters OK 17:20:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:29 Set A/D data flow result=40 17:20:29 Set A/D channel type result=40 17:20:29 Set A/D encoding result=40 17:20:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:29 Set channel filter=0.000000e+000 result=40 17:20:29 Config A/D Result=40 17:20:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:29 Get A/D filter: -9.255963e+061 result=40 17:20:29 Get A/D value=-858993460 result=40 17:20:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:20:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:20:29 Aux= 17:20:29 Message to Camera, serial 281631 queued 17:21:06 Received message from Master: op=PointingHead serial=281644 17:21:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:21:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:21:06 Point started: ret=0 17:21:06 point_skyscan result=0 17:21:07 Check angles 17:21:07 SkyScan query 17:21:07 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 17:21:07 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 17:21:08 Check angles 17:21:08 SkyScan query 17:21:08 SkyScan query done: ret=0 az=81.66<-5444 ze=66.525<-7565 Statuses=0009 0008 17:21:08 Msec=750 True Az=81.66 Ze=66.525 Az status=0009 Ze status=0008 17:21:08 Check angles 17:21:08 SkyScan query 17:21:09 SkyScan query done: ret=0 az=99.015<-6601 ze=66.51<-7566 Statuses=0009 0008 17:21:09 Msec=1500 True Az=99.015 Ze=66.51 Az status=0009 Ze status=0008 17:21:09 Check angles 17:21:09 SkyScan query 17:21:10 SkyScan query done: ret=0 az=116.625<-7775 ze=66.51<-7566 Statuses=0009 0008 17:21:10 Msec=2250 True Az=116.625 Ze=66.51 Az status=0009 Ze status=0008 17:21:10 Check angles 17:21:10 SkyScan query 17:21:10 SkyScan query done: ret=0 az=133.995<-8933 ze=66.51<-7566 Statuses=0009 0008 17:21:10 Msec=3000 True Az=133.995 Ze=66.51 Az status=0009 Ze status=0008 17:21:11 Check angles 17:21:11 SkyScan query 17:21:11 SkyScan query done: ret=0 az=151.83<-10122 ze=66.51<-7566 Statuses=0009 0008 17:21:11 Msec=3750 True Az=151.83 Ze=66.51 Az status=0009 Ze status=0008 17:21:11 Check angles 17:21:11 SkyScan query 17:21:12 SkyScan query done: ret=0 az=158.025<-10535 ze=66.51<-7566 Statuses=0008 0008 17:21:12 Msec=4500 True Az=158.025 Ze=66.51 Az status=0008 Ze status=0008 17:21:12 Message to Master queued w/err=0: serial=281644 error=0 17:21:17 Received message from Master: op=Filter serial=281645 17:21:17 Color wheel filter change from 0 to 0 17:21:17 FLIGetFilterPos err=0 currentPosition=0 17:21:17 FLIGetStepsRemaining err=0 RemainingSteps=0 17:21:17 Filter is already there-color wheel unchanged 17:21:17 Received message from Master: op=Shutter serial=281646 17:21:17 Shutter LASER close 17:21:17 Received message from Camera: op=State serial=281648 17:21:17 GetSingleValue result=40 Value=cccccccc 17:21:17 SkyScan query 17:21:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 17:21:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:18 Parameters OK 17:21:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:18 Set A/D data flow result=40 17:21:18 Set A/D channel type result=40 17:21:18 Set A/D encoding result=40 17:21:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:18 Set channel filter=0.000000e+000 result=40 17:21:18 Config A/D Result=40 17:21:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:18 Get A/D filter: -9.255963e+061 result=40 17:21:18 Get A/D value=-858993460 result=40 17:21:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:18 Parameters OK 17:21:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:18 Set A/D data flow result=40 17:21:18 Set A/D channel type result=40 17:21:18 Set A/D encoding result=40 17:21:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:18 Set channel filter=0.000000e+000 result=40 17:21:18 Config A/D Result=40 17:21:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:18 Get A/D filter: -9.255963e+061 result=40 17:21:18 Get A/D value=-858993460 result=40 17:21:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:21:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:21:18 Aux= 17:21:18 Message to Camera, serial 281648 queued 17:21:55 Received message from Master: op=PointingHead serial=281661 17:21:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:21:55 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:21:55 Point started: ret=0 17:21:55 point_skyscan result=0 17:21:56 Check angles 17:21:56 SkyScan query 17:21:56 SkyScan query done: ret=0 az=135.195<-9013 ze=36.885<-9541 Statuses=0009 0009 17:21:56 Msec=0 True Az=135.195 Ze=36.885 Az status=0009 Ze status=0009 17:21:56 Check angles 17:21:56 SkyScan query 17:21:57 SkyScan query done: ret=0 az=117.705<-7847 ze=15.93<-10938 Statuses=0009 0009 17:21:57 Msec=750 True Az=117.705 Ze=15.93 Az status=0009 Ze status=0009 17:21:57 Check angles 17:21:57 SkyScan query 17:21:58 SkyScan query done: ret=0 az=100.35<-6690 ze=-5.01<-12334 Statuses=0009 0009 17:21:58 Msec=1500 True Az=100.35 Ze=-5.01 Az status=0009 Ze status=0009 17:21:58 Check angles 17:21:58 SkyScan query 17:21:58 SkyScan query done: ret=0 az=82.755<-5517 ze=-25.965<-13731 Statuses=0009 0009 17:21:58 Msec=2250 True Az=82.755 Ze=-25.965 Az status=0009 Ze status=0009 17:21:59 Check angles 17:21:59 SkyScan query 17:21:59 SkyScan query done: ret=0 az=65.31<-4354 ze=-38.58<-14572 Statuses=0009 0008 17:21:59 Msec=3000 True Az=65.31 Ze=-38.58 Az status=0009 Ze status=0008 17:21:59 Check angles 17:21:59 SkyScan query 17:22:00 SkyScan query done: ret=0 az=47.85<-3190 ze=-38.52<-14568 Statuses=0009 0008 17:22:00 Msec=3750 True Az=47.85 Ze=-38.52 Az status=0009 Ze status=0008 17:22:00 Check angles 17:22:00 SkyScan query 17:22:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:22:01 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:22:01 Message to Master queued w/err=0: serial=281661 error=0 17:22:06 Received message from Master: op=Filter serial=281662 17:22:06 Color wheel filter change from 0 to 0 17:22:06 FLIGetFilterPos err=0 currentPosition=0 17:22:06 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:06 Filter is already there-color wheel unchanged 17:22:06 Received message from Master: op=Shutter serial=281663 17:22:06 Shutter LASER close 17:22:06 Received message from Camera: op=State serial=281665 17:22:06 GetSingleValue result=40 Value=cccccccc 17:22:06 SkyScan query 17:22:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:22:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:07 Parameters OK 17:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:07 Set A/D data flow result=40 17:22:07 Set A/D channel type result=40 17:22:07 Set A/D encoding result=40 17:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:07 Set channel filter=0.000000e+000 result=40 17:22:07 Config A/D Result=40 17:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:07 Get A/D filter: -9.255963e+061 result=40 17:22:07 Get A/D value=-858993460 result=40 17:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:07 Parameters OK 17:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:07 Set A/D data flow result=40 17:22:07 Set A/D channel type result=40 17:22:07 Set A/D encoding result=40 17:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:07 Set channel filter=0.000000e+000 result=40 17:22:07 Config A/D Result=40 17:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:07 Get A/D filter: -9.255963e+061 result=40 17:22:07 Get A/D value=-858993460 result=40 17:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:07 Aux= 17:22:07 Message to Camera, serial 281665 queued 17:22:43 Received message from Master: op=PointingHead serial=281678 17:22:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:22:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:22:44 Point started: ret=0 17:22:44 point_skyscan result=0 17:22:44 Check angles 17:22:44 SkyScan query 17:22:45 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.025<-16535 Statuses=0009 0009 17:22:45 Msec=0 True Az=63.825 Ze=-68.025 Az status=0009 Ze status=0009 17:22:45 Check angles 17:22:45 SkyScan query 17:22:46 SkyScan query done: ret=0 az=81.15<-5410 ze=-88.995<-17933 Statuses=0009 0009 17:22:46 Msec=750 True Az=81.15 Ze=-88.995 Az status=0009 Ze status=0009 17:22:46 Check angles 17:22:46 SkyScan query 17:22:47 SkyScan query done: ret=0 az=98.67<-6578 ze=-109.92<-19328 Statuses=0009 0009 17:22:47 Msec=1500 True Az=98.67 Ze=-109.92 Az status=0009 Ze status=0009 17:22:47 Check angles 17:22:47 SkyScan query 17:22:47 SkyScan query done: ret=0 az=116.055<-7737 ze=-130.905<-20727 Statuses=0009 0009 17:22:47 Msec=2250 True Az=116.055 Ze=-130.905 Az status=0009 Ze status=0009 17:22:47 Check angles 17:22:47 SkyScan query 17:22:48 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 17:22:48 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 17:22:48 Check angles 17:22:48 SkyScan query 17:22:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 17:22:49 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 17:22:49 Message to Master queued w/err=0: serial=281678 error=0 17:22:54 Received message from Master: op=Filter serial=281679 17:22:54 Color wheel filter change from 0 to 0 17:22:54 FLIGetFilterPos err=0 currentPosition=0 17:22:54 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:54 Filter is already there-color wheel unchanged 17:22:54 Received message from Master: op=Shutter serial=281680 17:22:54 Shutter LASER close 17:22:54 Received message from Camera: op=State serial=281682 17:22:54 GetSingleValue result=40 Value=cccccccc 17:22:54 SkyScan query 17:22:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:22:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:55 Parameters OK 17:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:55 Set A/D data flow result=40 17:22:55 Set A/D channel type result=40 17:22:55 Set A/D encoding result=40 17:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:55 Set channel filter=0.000000e+000 result=40 17:22:55 Config A/D Result=40 17:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:55 Get A/D filter: -9.255963e+061 result=40 17:22:55 Get A/D value=-858993460 result=40 17:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:55 Parameters OK 17:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:55 Set A/D data flow result=40 17:22:55 Set A/D channel type result=40 17:22:55 Set A/D encoding result=40 17:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:55 Set channel filter=0.000000e+000 result=40 17:22:55 Config A/D Result=40 17:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:55 Get A/D filter: -9.255963e+061 result=40 17:22:55 Get A/D value=-858993460 result=40 17:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:55 Aux= 17:22:55 Message to Camera, serial 281682 queued 17:23:31 Received message from Master: op=PointingHead serial=281695 17:23:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:23:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:23:32 Point started: ret=0 17:23:32 point_skyscan result=0 17:23:33 Check angles 17:23:33 SkyScan query 17:23:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.345<-23423 Statuses=0009 0009 17:23:33 Msec=0 True Az=113.01 Ze=-171.345 Az status=0009 Ze status=0009 17:23:33 Check angles 17:23:33 SkyScan query 17:23:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:23:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:23:34 Message to Master queued w/err=0: serial=281695 error=0 17:23:39 Received message from Master: op=Filter serial=281696 17:23:39 Color wheel filter change from 0 to 0 17:23:39 FLIGetFilterPos err=0 currentPosition=0 17:23:39 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:39 Filter is already there-color wheel unchanged 17:23:39 Received message from Master: op=Shutter serial=281697 17:23:39 Shutter LASER open 17:23:39 Received message from Camera: op=State serial=281699 17:23:39 GetSingleValue result=40 Value=cccccccc 17:23:39 SkyScan query 17:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:23:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:40 Parameters OK 17:23:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:40 Set A/D data flow result=40 17:23:40 Set A/D channel type result=40 17:23:40 Set A/D encoding result=40 17:23:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:40 Set channel filter=0.000000e+000 result=40 17:23:40 Config A/D Result=40 17:23:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:40 Get A/D filter: -9.255963e+061 result=40 17:23:40 Get A/D value=-858993460 result=40 17:23:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:40 Parameters OK 17:23:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:40 Set A/D data flow result=40 17:23:40 Set A/D channel type result=40 17:23:40 Set A/D encoding result=40 17:23:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:40 Set channel filter=0.000000e+000 result=40 17:23:40 Config A/D Result=40 17:23:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:40 Get A/D filter: -9.255963e+061 result=40 17:23:40 Get A/D value=-858993460 result=40 17:23:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:23:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:23:40 Aux= 17:23:40 Message to Camera, serial 281699 queued 17:23:48 Received message from Master: op=Shutter serial=281709 17:23:48 Shutter LASER close 17:23:49 Received message from Master: op=PointingHead serial=281713 17:23:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:23:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:23:49 Point started: ret=0 17:23:49 point_skyscan result=0 17:23:50 Check angles 17:23:50 SkyScan query 17:23:50 SkyScan query done: ret=0 az=136.11<-9074 ze=-143.235<-21549 Statuses=0009 0009 17:23:50 Msec=0 True Az=136.11 Ze=-143.235 Az status=0009 Ze status=0009 17:23:51 Check angles 17:23:51 SkyScan query 17:23:51 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.265<-20151 Statuses=0009 0009 17:23:51 Msec=750 True Az=153.555 Ze=-122.265 Az status=0009 Ze status=0009 17:23:51 Check angles 17:23:51 SkyScan query 17:23:52 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.355<-18757 Statuses=0009 0009 17:23:52 Msec=1500 True Az=171.135 Ze=-101.355 Az status=0009 Ze status=0009 17:23:52 Check angles 17:23:52 SkyScan query 17:23:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.415<-17361 Statuses=0008 0009 17:23:53 Msec=2250 True Az=175.995 Ze=-80.415 Az status=0008 Ze status=0009 17:23:53 Check angles 17:23:53 SkyScan query 17:23:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.445<-15963 Statuses=0008 0009 17:23:53 Msec=3000 True Az=175.995 Ze=-59.445 Az status=0008 Ze status=0009 17:23:54 Check angles 17:23:54 SkyScan query 17:23:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:23:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:23:54 Message to Master queued w/err=0: serial=281713 error=0 17:23:59 Received message from Master: op=Filter serial=281714 17:23:59 Color wheel filter change from 0 to 0 17:23:59 FLIGetFilterPos err=0 currentPosition=0 17:23:59 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:59 Filter is already there-color wheel unchanged 17:23:59 Received message from Master: op=Shutter serial=281715 17:23:59 Shutter LASER close 17:24:00 Received message from Camera: op=State serial=281717 17:24:00 GetSingleValue result=40 Value=cccccccc 17:24:00 SkyScan query 17:24:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:24:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:00 Parameters OK 17:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:00 Set A/D data flow result=40 17:24:00 Set A/D channel type result=40 17:24:00 Set A/D encoding result=40 17:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:00 Set channel filter=0.000000e+000 result=40 17:24:00 Config A/D Result=40 17:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:00 Get A/D filter: -9.255963e+061 result=40 17:24:00 Get A/D value=-858993460 result=40 17:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:00 Parameters OK 17:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:00 Set A/D data flow result=40 17:24:00 Set A/D channel type result=40 17:24:00 Set A/D encoding result=40 17:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:00 Set channel filter=0.000000e+000 result=40 17:24:00 Config A/D Result=40 17:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:00 Get A/D filter: -9.255963e+061 result=40 17:24:00 Get A/D value=-858993460 result=40 17:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:24:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:24:00 Aux= 17:24:00 Message to Camera, serial 281717 queued 17:24:37 Received message from Master: op=PointingHead serial=281730 17:24:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:24:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:24:37 Point started: ret=0 17:24:37 point_skyscan result=0 17:24:38 Check angles 17:24:38 SkyScan query 17:24:39 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.135<-13409 Statuses=0009 0009 17:24:39 Msec=0 True Az=152.58 Ze=-21.135 Az status=0009 Ze status=0009 17:24:39 Check angles 17:24:39 SkyScan query 17:24:39 SkyScan query done: ret=0 az=135.03<-9002 ze=-0.225<-12015 Statuses=0009 0009 17:24:39 Msec=750 True Az=135.03 Ze=-0.225 Az status=0009 Ze status=0009 17:24:40 Check angles 17:24:40 SkyScan query 17:24:40 SkyScan query done: ret=0 az=117.165<-7811 ze=21.21<-10586 Statuses=0009 0009 17:24:40 Msec=1500 True Az=117.165 Ze=21.21 Az status=0009 Ze status=0009 17:24:40 Check angles 17:24:40 SkyScan query 17:24:41 SkyScan query done: ret=0 az=99.795<-6653 ze=42.075<-9195 Statuses=0009 0009 17:24:41 Msec=2250 True Az=99.795 Ze=42.075 Az status=0009 Ze status=0009 17:24:41 Check angles 17:24:41 SkyScan query 17:24:42 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 17:24:42 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 17:24:42 Check angles 17:24:42 SkyScan query 17:24:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:24:42 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 17:24:42 Message to Master queued w/err=0: serial=281730 error=0 17:24:47 Received message from Master: op=Filter serial=281731 17:24:47 Color wheel filter change from 0 to 0 17:24:47 FLIGetFilterPos err=0 currentPosition=0 17:24:47 FLIGetStepsRemaining err=0 RemainingSteps=0 17:24:47 Filter is already there-color wheel unchanged 17:24:48 Received message from Master: op=Shutter serial=281732 17:24:48 Shutter LASER close 17:24:48 Received message from Camera: op=State serial=281734 17:24:48 GetSingleValue result=40 Value=cccccccc 17:24:48 SkyScan query 17:24:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:24:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:48 Parameters OK 17:24:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:48 Set A/D data flow result=40 17:24:48 Set A/D channel type result=40 17:24:48 Set A/D encoding result=40 17:24:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:48 Set channel filter=0.000000e+000 result=40 17:24:48 Config A/D Result=40 17:24:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:48 Get A/D filter: -9.255963e+061 result=40 17:24:48 Get A/D value=-858993460 result=40 17:24:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:48 Parameters OK 17:24:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:48 Set A/D data flow result=40 17:24:48 Set A/D channel type result=40 17:24:48 Set A/D encoding result=40 17:24:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:48 Set channel filter=0.000000e+000 result=40 17:24:48 Config A/D Result=40 17:24:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:48 Get A/D filter: -9.255963e+061 result=40 17:24:48 Get A/D value=-858993460 result=40 17:24:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:24:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:24:48 Aux= 17:24:48 Message to Camera, serial 281734 queued 17:25:24 Received message from Master: op=PointingHead serial=281746 17:25:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:25:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:25:25 Point started: ret=0 17:25:25 point_skyscan result=0 17:25:25 Check angles 17:25:25 SkyScan query 17:25:26 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 17:25:26 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 17:25:26 Check angles 17:25:26 SkyScan query 17:25:27 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 17:25:27 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 17:25:27 Check angles 17:25:27 SkyScan query 17:25:27 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 17:25:27 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 17:25:28 Check angles 17:25:28 SkyScan query 17:25:28 SkyScan query done: ret=0 az=161.685<-10779 ze=38.505<-9433 Statuses=0009 0008 17:25:28 Msec=2250 True Az=161.685 Ze=38.505 Az status=0009 Ze status=0008 17:25:28 Check angles 17:25:28 SkyScan query 17:25:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 17:25:29 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 17:25:29 Check angles 17:25:29 SkyScan query 17:25:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:25:30 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:25:30 Message to Master queued w/err=0: serial=281746 error=0 17:25:35 Received message from Master: op=Filter serial=281747 17:25:35 Color wheel filter change from 0 to 0 17:25:35 FLIGetFilterPos err=0 currentPosition=0 17:25:35 FLIGetStepsRemaining err=0 RemainingSteps=0 17:25:35 Filter is already there-color wheel unchanged 17:25:35 Received message from Master: op=Shutter serial=281748 17:25:35 Shutter LASER close 17:25:35 Received message from Camera: op=State serial=281750 17:25:35 GetSingleValue result=40 Value=cccccccc 17:25:35 SkyScan query 17:25:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:25:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:35 Parameters OK 17:25:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:35 Set A/D data flow result=40 17:25:35 Set A/D channel type result=40 17:25:35 Set A/D encoding result=40 17:25:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:35 Set channel filter=0.000000e+000 result=40 17:25:35 Config A/D Result=40 17:25:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:35 Get A/D filter: -9.255963e+061 result=40 17:25:35 Get A/D value=-858993460 result=40 17:25:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:35 Parameters OK 17:25:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:35 Set A/D data flow result=40 17:25:35 Set A/D channel type result=40 17:25:35 Set A/D encoding result=40 17:25:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:35 Set channel filter=0.000000e+000 result=40 17:25:35 Config A/D Result=40 17:25:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:35 Get A/D filter: -9.255963e+061 result=40 17:25:35 Get A/D value=-858993460 result=40 17:25:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:25:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:25:35 Aux= 17:25:35 Message to Camera, serial 281750 queued 17:26:12 Received message from Master: op=PointingHead serial=281763 17:26:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:26:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:26:13 Point started: ret=0 17:26:13 point_skyscan result=0 17:26:13 Check angles 17:26:13 SkyScan query 17:26:14 SkyScan query done: ret=0 az=153.21<-10214 ze=9.015<-11399 Statuses=0009 0009 17:26:14 Msec=0 True Az=153.21 Ze=9.015 Az status=0009 Ze status=0009 17:26:14 Check angles 17:26:14 SkyScan query 17:26:15 SkyScan query done: ret=0 az=135.75<-9050 ze=-11.97<-12798 Statuses=0009 0009 17:26:15 Msec=750 True Az=135.75 Ze=-11.97 Az status=0009 Ze status=0009 17:26:15 Check angles 17:26:15 SkyScan query 17:26:15 SkyScan query done: ret=0 az=118.245<-7883 ze=-32.895<-14193 Statuses=0009 0009 17:26:15 Msec=1500 True Az=118.245 Ze=-32.895 Az status=0009 Ze status=0009 17:26:16 Check angles 17:26:16 SkyScan query [UTC 2018-12-19 17:26:16] 17:26:16 SkyScan query done: ret=0 az=100.845<-6723 ze=-51.51<-15434 Statuses=0009 0009 17:26:16 Msec=2250 True Az=100.845 Ze=-51.51 Az status=0009 Ze status=0009 17:26:16 Check angles 17:26:16 SkyScan query 17:26:17 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 17:26:17 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 17:26:17 Check angles 17:26:17 SkyScan query 17:26:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:26:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:26:18 Message to Master queued w/err=0: serial=281763 error=0 17:26:23 Received message from Master: op=Filter serial=281764 17:26:23 Color wheel filter change from 0 to 0 17:26:23 FLIGetFilterPos err=0 currentPosition=0 17:26:23 FLIGetStepsRemaining err=0 RemainingSteps=0 17:26:23 Filter is already there-color wheel unchanged 17:26:23 Received message from Master: op=Shutter serial=281765 17:26:23 Shutter LASER close 17:26:23 Received message from Camera: op=State serial=281767 17:26:23 GetSingleValue result=40 Value=cccccccc 17:26:23 SkyScan query 17:26:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:26:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:26:23 Parameters OK 17:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:26:23 Set A/D data flow result=40 17:26:23 Set A/D channel type result=40 17:26:23 Set A/D encoding result=40 17:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:26:23 Set channel filter=0.000000e+000 result=40 17:26:23 Config A/D Result=40 17:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:26:23 Get A/D filter: -9.255963e+061 result=40 17:26:23 Get A/D value=-858993460 result=40 17:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:26:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:26:23 Parameters OK 17:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:26:23 Set A/D data flow result=40 17:26:23 Set A/D channel type result=40 17:26:23 Set A/D encoding result=40 17:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:26:23 Set channel filter=0.000000e+000 result=40 17:26:23 Config A/D Result=40 17:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:26:23 Get A/D filter: -9.255963e+061 result=40 17:26:23 Get A/D value=-858993460 result=40 17:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:26:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:26:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:26:23 Aux= 17:26:23 Message to Camera, serial 281767 queued 17:27:00 Received message from Master: op=PointingHead serial=281780 17:27:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:27:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:27:01 Point started: ret=0 17:27:01 point_skyscan result=0 17:27:01 Check angles 17:27:01 SkyScan query 17:27:02 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.105<-17407 Statuses=0009 0009 17:27:02 Msec=0 True Az=108.96 Ze=-81.105 Az status=0009 Ze status=0009 17:27:02 Check angles 17:27:02 SkyScan query 17:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 17:27:03 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 17:27:03 Check angles 17:27:03 SkyScan query 17:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 17:27:03 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 17:27:04 Check angles 17:27:04 SkyScan query 17:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.29<-21686 Statuses=0008 0009 17:27:04 Msec=2250 True Az=112.995 Ze=-145.29 Az status=0008 Ze status=0009 17:27:04 Check angles 17:27:04 SkyScan query 17:27:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.23<-23082 Statuses=0008 0009 17:27:05 Msec=3000 True Az=112.995 Ze=-166.23 Az status=0008 Ze status=0009 17:27:05 Check angles 17:27:05 SkyScan query 17:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:27:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:27:06 Message to Master queued w/err=0: serial=281780 error=0 17:27:11 Received message from Master: op=Filter serial=281781 17:27:11 Color wheel filter change from 0 to 0 17:27:11 FLIGetFilterPos err=0 currentPosition=0 17:27:11 FLIGetStepsRemaining err=0 RemainingSteps=0 17:27:11 Filter is already there-color wheel unchanged 17:27:11 Received message from Master: op=Shutter serial=281782 17:27:11 Shutter LASER open 17:27:11 Received message from Camera: op=State serial=281784 17:27:11 GetSingleValue result=40 Value=cccccccc 17:27:11 SkyScan query 17:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:27:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:12 Parameters OK 17:27:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:12 Set A/D data flow result=40 17:27:12 Set A/D channel type result=40 17:27:12 Set A/D encoding result=40 17:27:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:12 Set channel filter=0.000000e+000 result=40 17:27:12 Config A/D Result=40 17:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:12 Get A/D filter: -9.255963e+061 result=40 17:27:12 Get A/D value=-858993460 result=40 17:27:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:12 Parameters OK 17:27:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:12 Set A/D data flow result=40 17:27:12 Set A/D channel type result=40 17:27:12 Set A/D encoding result=40 17:27:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:12 Set channel filter=0.000000e+000 result=40 17:27:12 Config A/D Result=40 17:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:12 Get A/D filter: -9.255963e+061 result=40 17:27:12 Get A/D value=-858993460 result=40 17:27:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:27:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:27:12 Aux= 17:27:12 Message to Camera, serial 281784 queued 17:27:20 Received message from Master: op=Shutter serial=281794 17:27:20 Shutter LASER close 17:27:21 Received message from Master: op=PointingHead serial=281798 17:27:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:27:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:27:21 Point started: ret=0 17:27:21 point_skyscan result=0 17:27:22 Check angles 17:27:22 SkyScan query 17:27:22 SkyScan query done: ret=0 az=90.015<-6001 ze=157.335<-1511 Statuses=0009 0009 17:27:22 Msec=0 True Az=90.015 Ze=157.335 Az status=0009 Ze status=0009 17:27:22 Check angles 17:27:22 SkyScan query 17:27:23 SkyScan query done: ret=0 az=72.09<-4806 ze=135.945<-2937 Statuses=0009 0009 17:27:23 Msec=750 True Az=72.09 Ze=135.945 Az status=0009 Ze status=0009 17:27:23 Check angles 17:27:23 SkyScan query 17:27:24 SkyScan query done: ret=0 az=54.735<-3649 ze=114.99<-4334 Statuses=0009 0009 17:27:24 Msec=1500 True Az=54.735 Ze=114.99 Az status=0009 Ze status=0009 17:27:24 Check angles 17:27:24 SkyScan query 17:27:24 SkyScan query done: ret=0 az=40.98<-2732 ze=93.6<-5760 Statuses=0009 0009 17:27:24 Msec=2250 True Az=40.98 Ze=93.6 Az status=0009 Ze status=0009 17:27:25 Check angles 17:27:25 SkyScan query 17:27:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.57<-7162 Statuses=0008 0009 17:27:25 Msec=3000 True Az=40.995 Ze=72.57 Az status=0008 Ze status=0009 17:27:25 Check angles 17:27:25 SkyScan query 17:27:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 17:27:26 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 17:27:26 Check angles 17:27:26 SkyScan query 17:27:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:27:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:27:27 Message to Master queued w/err=0: serial=281798 error=0 17:27:32 Received message from Master: op=Filter serial=281799 17:27:32 Color wheel filter change from 0 to 0 17:27:32 FLIGetFilterPos err=0 currentPosition=0 17:27:32 FLIGetStepsRemaining err=0 RemainingSteps=0 17:27:32 Filter is already there-color wheel unchanged 17:27:32 Received message from Master: op=Shutter serial=281800 17:27:32 Shutter LASER close 17:27:32 Received message from Camera: op=State serial=281802 17:27:32 GetSingleValue result=40 Value=cccccccc 17:27:32 SkyScan query 17:27:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:27:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:33 Parameters OK 17:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:33 Set A/D data flow result=40 17:27:33 Set A/D channel type result=40 17:27:33 Set A/D encoding result=40 17:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:33 Set channel filter=0.000000e+000 result=40 17:27:33 Config A/D Result=40 17:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:33 Get A/D filter: -9.255963e+061 result=40 17:27:33 Get A/D value=-858993460 result=40 17:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:33 Parameters OK 17:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:33 Set A/D data flow result=40 17:27:33 Set A/D channel type result=40 17:27:33 Set A/D encoding result=40 17:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:33 Set channel filter=0.000000e+000 result=40 17:27:33 Config A/D Result=40 17:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:33 Get A/D filter: -9.255963e+061 result=40 17:27:33 Get A/D value=-858993460 result=40 17:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:27:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:27:33 Aux= 17:27:33 Message to Camera, serial 281802 queued 17:28:09 Received message from Master: op=PointingHead serial=281815 17:28:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:28:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:28:10 Point started: ret=0 17:28:10 point_skyscan result=0 17:28:11 Check angles 17:28:11 SkyScan query 17:28:11 SkyScan query done: ret=0 az=64.425<-4295 ze=66.54<-7564 Statuses=0009 0008 17:28:11 Msec=0 True Az=64.425 Ze=66.54 Az status=0009 Ze status=0008 17:28:11 Check angles 17:28:11 SkyScan query 17:28:12 SkyScan query done: ret=0 az=81.825<-5455 ze=66.51<-7566 Statuses=0009 0008 17:28:12 Msec=750 True Az=81.825 Ze=66.51 Az status=0009 Ze status=0008 17:28:12 Check angles 17:28:12 SkyScan query 17:28:13 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 17:28:13 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 17:28:13 Check angles 17:28:13 SkyScan query 17:28:13 SkyScan query done: ret=0 az=117.66<-7844 ze=66.495<-7567 Statuses=0009 0008 17:28:13 Msec=2250 True Az=117.66 Ze=66.495 Az status=0009 Ze status=0008 17:28:14 Check angles 17:28:14 SkyScan query 17:28:14 SkyScan query done: ret=0 az=135.33<-9022 ze=66.495<-7567 Statuses=0009 0008 17:28:14 Msec=3000 True Az=135.33 Ze=66.495 Az status=0009 Ze status=0008 17:28:14 Check angles 17:28:14 SkyScan query 17:28:15 SkyScan query done: ret=0 az=152.835<-10189 ze=66.495<-7567 Statuses=0009 0008 17:28:15 Msec=3750 True Az=152.835 Ze=66.495 Az status=0009 Ze status=0008 17:28:15 Check angles 17:28:15 SkyScan query 17:28:16 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:28:16 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:28:16 Message to Master queued w/err=0: serial=281815 error=0 17:28:21 Received message from Master: op=Filter serial=281816 17:28:21 Color wheel filter change from 0 to 0 17:28:21 FLIGetFilterPos err=0 currentPosition=0 17:28:21 FLIGetStepsRemaining err=0 RemainingSteps=0 17:28:21 Filter is already there-color wheel unchanged 17:28:21 Received message from Master: op=Shutter serial=281817 17:28:21 Shutter LASER close 17:28:21 Received message from Camera: op=State serial=281819 17:28:21 GetSingleValue result=40 Value=cccccccc 17:28:21 SkyScan query 17:28:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:28:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:28:22 Parameters OK 17:28:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:28:22 Set A/D data flow result=40 17:28:22 Set A/D channel type result=40 17:28:22 Set A/D encoding result=40 17:28:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:28:22 Set channel filter=0.000000e+000 result=40 17:28:22 Config A/D Result=40 17:28:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:28:22 Get A/D filter: -9.255963e+061 result=40 17:28:22 Get A/D value=-858993460 result=40 17:28:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:28:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:28:22 Parameters OK 17:28:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:28:22 Set A/D data flow result=40 17:28:22 Set A/D channel type result=40 17:28:22 Set A/D encoding result=40 17:28:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:28:22 Set channel filter=0.000000e+000 result=40 17:28:22 Config A/D Result=40 17:28:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:28:22 Get A/D filter: -9.255963e+061 result=40 17:28:22 Get A/D value=-858993460 result=40 17:28:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:28:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:28:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:28:22 Aux= 17:28:22 Message to Camera, serial 281819 queued 17:28:58 Received message from Master: op=PointingHead serial=281832 17:28:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:28:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:28:59 Point started: ret=0 17:28:59 point_skyscan result=0 17:28:59 Check angles 17:28:59 SkyScan query 17:29:00 SkyScan query done: ret=0 az=134.82<-8988 ze=36.645<-9557 Statuses=0009 0009 17:29:00 Msec=0 True Az=134.82 Ze=36.645 Az status=0009 Ze status=0009 17:29:00 Check angles 17:29:00 SkyScan query 17:29:01 SkyScan query done: ret=0 az=117.36<-7824 ze=15.72<-10952 Statuses=0009 0009 17:29:01 Msec=750 True Az=117.36 Ze=15.72 Az status=0009 Ze status=0009 17:29:01 Check angles 17:29:01 SkyScan query 17:29:02 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.25<-12350 Statuses=0009 0009 17:29:02 Msec=1500 True Az=99.975 Ze=-5.25 Az status=0009 Ze status=0009 17:29:02 Check angles 17:29:02 SkyScan query 17:29:02 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.235<-13749 Statuses=0009 0009 17:29:02 Msec=2250 True Az=82.485 Ze=-26.235 Az status=0009 Ze status=0009 17:29:02 Check angles 17:29:02 SkyScan query 17:29:03 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.58<-14572 Statuses=0009 0008 17:29:03 Msec=3000 True Az=64.92 Ze=-38.58 Az status=0009 Ze status=0008 17:29:03 Check angles 17:29:03 SkyScan query 17:29:04 SkyScan query done: ret=0 az=47.565<-3171 ze=-38.52<-14568 Statuses=0009 0008 17:29:04 Msec=3750 True Az=47.565 Ze=-38.52 Az status=0009 Ze status=0008 17:29:04 Check angles 17:29:04 SkyScan query 17:29:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:29:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:29:05 Message to Master queued w/err=0: serial=281832 error=0 17:29:10 Received message from Master: op=Filter serial=281833 17:29:10 Color wheel filter change from 0 to 0 17:29:10 FLIGetFilterPos err=0 currentPosition=0 17:29:10 FLIGetStepsRemaining err=0 RemainingSteps=0 17:29:10 Filter is already there-color wheel unchanged 17:29:10 Received message from Master: op=Shutter serial=281834 17:29:10 Shutter LASER close 17:29:10 Received message from Camera: op=State serial=281836 17:29:10 GetSingleValue result=40 Value=cccccccc 17:29:10 SkyScan query 17:29:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:29:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:10 Parameters OK 17:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:10 Set A/D data flow result=40 17:29:10 Set A/D channel type result=40 17:29:10 Set A/D encoding result=40 17:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:10 Set channel filter=0.000000e+000 result=40 17:29:10 Config A/D Result=40 17:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:10 Get A/D filter: -9.255963e+061 result=40 17:29:10 Get A/D value=-858993460 result=40 17:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:10 Parameters OK 17:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:10 Set A/D data flow result=40 17:29:10 Set A/D channel type result=40 17:29:10 Set A/D encoding result=40 17:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:10 Set channel filter=0.000000e+000 result=40 17:29:10 Config A/D Result=40 17:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:10 Get A/D filter: -9.255963e+061 result=40 17:29:10 Get A/D value=-858993460 result=40 17:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:29:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:29:10 Aux= 17:29:10 Message to Camera, serial 281836 queued 17:29:47 Received message from Master: op=PointingHead serial=281849 17:29:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:29:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:29:48 Point started: ret=0 17:29:48 point_skyscan result=0 17:29:48 Check angles 17:29:48 SkyScan query 17:29:49 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.37<-16558 Statuses=0009 0009 17:29:49 Msec=0 True Az=64.005 Ze=-68.37 Az status=0009 Ze status=0009 17:29:49 Check angles 17:29:49 SkyScan query 17:29:50 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.37<-17958 Statuses=0009 0009 17:29:50 Msec=750 True Az=81.54 Ze=-89.37 Az status=0009 Ze status=0009 17:29:50 Check angles 17:29:50 SkyScan query 17:29:50 SkyScan query done: ret=0 az=99.015<-6601 ze=-110.28<-19352 Statuses=0009 0009 17:29:50 Msec=1500 True Az=99.015 Ze=-110.28 Az status=0009 Ze status=0009 17:29:51 Check angles 17:29:51 SkyScan query 17:29:51 SkyScan query done: ret=0 az=116.49<-7766 ze=-131.235<-20749 Statuses=0009 0009 17:29:51 Msec=2250 True Az=116.49 Ze=-131.235 Az status=0009 Ze status=0009 17:29:51 Check angles 17:29:51 SkyScan query 17:29:52 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 17:29:52 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 17:29:52 Check angles 17:29:52 SkyScan query 17:29:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 17:29:53 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 17:29:53 Message to Master queued w/err=0: serial=281849 error=0 17:29:58 Received message from Master: op=Filter serial=281850 17:29:58 Color wheel filter change from 0 to 0 17:29:58 FLIGetFilterPos err=0 currentPosition=0 17:29:58 FLIGetStepsRemaining err=0 RemainingSteps=0 17:29:58 Filter is already there-color wheel unchanged 17:29:58 Received message from Master: op=Shutter serial=281851 17:29:58 Shutter LASER close 17:29:58 Received message from Camera: op=State serial=281853 17:29:58 GetSingleValue result=40 Value=cccccccc 17:29:58 SkyScan query 17:29:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:29:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:58 Parameters OK 17:29:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:58 Set A/D data flow result=40 17:29:58 Set A/D channel type result=40 17:29:58 Set A/D encoding result=40 17:29:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:58 Set channel filter=0.000000e+000 result=40 17:29:58 Config A/D Result=40 17:29:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:58 Get A/D filter: -9.255963e+061 result=40 17:29:58 Get A/D value=-858993460 result=40 17:29:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:58 Parameters OK 17:29:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:58 Set A/D data flow result=40 17:29:58 Set A/D channel type result=40 17:29:58 Set A/D encoding result=40 17:29:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:58 Set channel filter=0.000000e+000 result=40 17:29:58 Config A/D Result=40 17:29:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:58 Get A/D filter: -9.255963e+061 result=40 17:29:58 Get A/D value=-858993460 result=40 17:29:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:29:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:29:58 Aux= 17:29:58 Message to Camera, serial 281853 queued 17:30:34 Received message from Master: op=PointingHead serial=281865 17:30:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:30:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:30:35 Point started: ret=0 17:30:35 point_skyscan result=0 17:30:35 Check angles 17:30:35 SkyScan query 17:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0009 0009 17:30:36 Msec=0 True Az=112.995 Ze=-170.895 Az status=0009 Ze status=0009 17:30:36 Check angles 17:30:36 SkyScan query 17:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:30:37 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:30:37 Message to Master queued w/err=0: serial=281865 error=0 17:30:42 Received message from Master: op=Filter serial=281866 17:30:42 Color wheel filter change from 0 to 0 17:30:42 FLIGetFilterPos err=0 currentPosition=0 17:30:42 FLIGetStepsRemaining err=0 RemainingSteps=0 17:30:42 Filter is already there-color wheel unchanged 17:30:42 Received message from Master: op=Shutter serial=281867 17:30:42 Shutter LASER open 17:30:42 Received message from Camera: op=State serial=281869 17:30:42 GetSingleValue result=40 Value=cccccccc 17:30:42 SkyScan query 17:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:30:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:43 Parameters OK 17:30:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:43 Set A/D data flow result=40 17:30:43 Set A/D channel type result=40 17:30:43 Set A/D encoding result=40 17:30:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:43 Set channel filter=0.000000e+000 result=40 17:30:43 Config A/D Result=40 17:30:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:43 Get A/D filter: -9.255963e+061 result=40 17:30:43 Get A/D value=-858993460 result=40 17:30:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:43 Parameters OK 17:30:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:43 Set A/D data flow result=40 17:30:43 Set A/D channel type result=40 17:30:43 Set A/D encoding result=40 17:30:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:43 Set channel filter=0.000000e+000 result=40 17:30:43 Config A/D Result=40 17:30:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:43 Get A/D filter: -9.255963e+061 result=40 17:30:43 Get A/D value=-858993460 result=40 17:30:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:30:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:30:43 Aux= 17:30:43 Message to Camera, serial 281869 queued 17:30:51 Received message from Master: op=Shutter serial=281879 17:30:51 Shutter LASER close 17:30:52 Received message from Master: op=PointingHead serial=281883 17:30:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:30:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:30:52 Point started: ret=0 17:30:52 point_skyscan result=0 17:30:53 Check angles 17:30:53 SkyScan query 17:30:53 SkyScan query done: ret=0 az=136.425<-9095 ze=-142.77<-21518 Statuses=0009 0009 17:30:53 Msec=0 True Az=136.425 Ze=-142.77 Az status=0009 Ze status=0009 17:30:54 Check angles 17:30:54 SkyScan query 17:30:54 SkyScan query done: ret=0 az=154.32<-10288 ze=-121.395<-20093 Statuses=0009 0009 17:30:54 Msec=750 True Az=154.32 Ze=-121.395 Az status=0009 Ze status=0009 17:30:54 Check angles 17:30:54 SkyScan query 17:30:55 SkyScan query done: ret=0 az=171.81<-11454 ze=-100.335<-18689 Statuses=0009 0009 17:30:55 Msec=1500 True Az=171.81 Ze=-100.335 Az status=0009 Ze status=0009 17:30:55 Check angles 17:30:55 SkyScan query 17:30:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.425<-17295 Statuses=0008 0009 17:30:56 Msec=2250 True Az=175.995 Ze=-79.425 Az status=0008 Ze status=0009 17:30:56 Check angles 17:30:56 SkyScan query 17:30:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.44<-15896 Statuses=0008 0009 17:30:56 Msec=3000 True Az=175.995 Ze=-58.44 Az status=0008 Ze status=0009 17:30:57 Check angles 17:30:57 SkyScan query 17:30:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 17:30:57 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 17:30:57 Message to Master queued w/err=0: serial=281883 error=0 17:31:02 Received message from Master: op=Filter serial=281884 17:31:02 Color wheel filter change from 0 to 0 17:31:02 FLIGetFilterPos err=0 currentPosition=0 17:31:02 FLIGetStepsRemaining err=0 RemainingSteps=0 17:31:02 Filter is already there-color wheel unchanged 17:31:02 Received message from Master: op=Shutter serial=281885 17:31:02 Shutter LASER close 17:31:03 Received message from Camera: op=State serial=281887 17:31:03 GetSingleValue result=40 Value=cccccccc 17:31:03 SkyScan query 17:31:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:31:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:03 Parameters OK 17:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:03 Set A/D data flow result=40 17:31:03 Set A/D channel type result=40 17:31:03 Set A/D encoding result=40 17:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:03 Set channel filter=0.000000e+000 result=40 17:31:03 Config A/D Result=40 17:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:03 Get A/D filter: -9.255963e+061 result=40 17:31:03 Get A/D value=-858993460 result=40 17:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:03 Parameters OK 17:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:03 Set A/D data flow result=40 17:31:03 Set A/D channel type result=40 17:31:03 Set A/D encoding result=40 17:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:03 Set channel filter=0.000000e+000 result=40 17:31:03 Config A/D Result=40 17:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:03 Get A/D filter: -9.255963e+061 result=40 17:31:03 Get A/D value=-858993460 result=40 17:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:31:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:31:03 Aux= 17:31:03 Message to Camera, serial 281887 queued 17:31:40 Received message from Master: op=PointingHead serial=281900 17:31:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:31:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:31:40 Point started: ret=0 17:31:40 point_skyscan result=0 17:31:41 Check angles 17:31:41 SkyScan query 17:31:42 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.615<-13441 Statuses=0009 0009 17:31:42 Msec=0 True Az=152.91 Ze=-21.615 Az status=0009 Ze status=0009 17:31:42 Check angles 17:31:42 SkyScan query 17:31:42 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.6<-12040 Statuses=0009 0009 17:31:42 Msec=750 True Az=135.27 Ze=-0.6 Az status=0009 Ze status=0009 17:31:43 Check angles 17:31:43 SkyScan query 17:31:43 SkyScan query done: ret=0 az=117.885<-7859 ze=20.28<-10648 Statuses=0009 0009 17:31:43 Msec=1500 True Az=117.885 Ze=20.28 Az status=0009 Ze status=0009 17:31:43 Check angles 17:31:43 SkyScan query 17:31:44 SkyScan query done: ret=0 az=100.425<-6695 ze=41.295<-9247 Statuses=0009 0009 17:31:44 Msec=2250 True Az=100.425 Ze=41.295 Az status=0009 Ze status=0009 17:31:44 Check angles 17:31:44 SkyScan query 17:31:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 17:31:45 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 17:31:45 Check angles 17:31:45 SkyScan query 17:31:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:31:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:31:45 Message to Master queued w/err=0: serial=281900 error=0 17:31:50 Received message from Master: op=Filter serial=281901 17:31:50 Color wheel filter change from 0 to 0 17:31:50 FLIGetFilterPos err=0 currentPosition=0 17:31:50 FLIGetStepsRemaining err=0 RemainingSteps=0 17:31:50 Filter is already there-color wheel unchanged 17:31:51 Received message from Master: op=Shutter serial=281902 17:31:51 Shutter LASER close 17:31:51 Received message from Camera: op=State serial=281904 17:31:51 GetSingleValue result=40 Value=cccccccc 17:31:51 SkyScan query 17:31:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:31:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:51 Parameters OK 17:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:51 Set A/D data flow result=40 17:31:51 Set A/D channel type result=40 17:31:51 Set A/D encoding result=40 17:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:51 Set channel filter=0.000000e+000 result=40 17:31:51 Config A/D Result=40 17:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:51 Get A/D filter: -9.255963e+061 result=40 17:31:51 Get A/D value=-858993460 result=40 17:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:51 Parameters OK 17:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:51 Set A/D data flow result=40 17:31:51 Set A/D channel type result=40 17:31:51 Set A/D encoding result=40 17:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:51 Set channel filter=0.000000e+000 result=40 17:31:51 Config A/D Result=40 17:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:51 Get A/D filter: -9.255963e+061 result=40 17:31:51 Get A/D value=-858993460 result=40 17:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:31:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:31:51 Aux= 17:31:51 Message to Camera, serial 281904 queued 17:32:28 Received message from Master: op=PointingHead serial=281917 17:32:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:32:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:32:28 Point started: ret=0 17:32:28 point_skyscan result=0 17:32:29 Check angles 17:32:29 SkyScan query 17:32:30 SkyScan query done: ret=0 az=108.9<-7260 ze=38.49<-9434 Statuses=0009 0008 17:32:30 Msec=0 True Az=108.9 Ze=38.49 Az status=0009 Ze status=0008 17:32:30 Check angles 17:32:30 SkyScan query 17:32:30 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 17:32:30 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 17:32:31 Check angles 17:32:31 SkyScan query 17:32:31 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 17:32:31 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 17:32:31 Check angles 17:32:31 SkyScan query 17:32:32 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 17:32:32 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 17:32:32 Check angles 17:32:32 SkyScan query 17:32:33 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:32:33 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:32:33 Check angles 17:32:33 SkyScan query 17:32:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:32:34 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:32:34 Message to Master queued w/err=0: serial=281917 error=0 17:32:39 Received message from Master: op=Filter serial=281918 17:32:39 Color wheel filter change from 0 to 0 17:32:39 FLIGetFilterPos err=0 currentPosition=0 17:32:39 FLIGetStepsRemaining err=0 RemainingSteps=0 17:32:39 Filter is already there-color wheel unchanged 17:32:39 Received message from Master: op=Shutter serial=281919 17:32:39 Shutter LASER close 17:32:39 Received message from Camera: op=State serial=281921 17:32:39 GetSingleValue result=40 Value=cccccccc 17:32:39 SkyScan query 17:32:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:32:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:39 Parameters OK 17:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:39 Set A/D data flow result=40 17:32:39 Set A/D channel type result=40 17:32:39 Set A/D encoding result=40 17:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:39 Set channel filter=0.000000e+000 result=40 17:32:39 Config A/D Result=40 17:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:39 Get A/D filter: -9.255963e+061 result=40 17:32:39 Get A/D value=-858993460 result=40 17:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:39 Parameters OK 17:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:39 Set A/D data flow result=40 17:32:39 Set A/D channel type result=40 17:32:39 Set A/D encoding result=40 17:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:39 Set channel filter=0.000000e+000 result=40 17:32:39 Config A/D Result=40 17:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:39 Get A/D filter: -9.255963e+061 result=40 17:32:39 Get A/D value=-858993460 result=40 17:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:32:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:32:39 Aux= 17:32:39 Message to Camera, serial 281921 queued 17:33:16 Received message from Master: op=PointingHead serial=281934 17:33:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:33:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:33:16 Point started: ret=0 17:33:16 point_skyscan result=0 17:33:17 Check angles 17:33:17 SkyScan query 17:33:18 SkyScan query done: ret=0 az=153.135<-10209 ze=8.91<-11406 Statuses=0009 0009 17:33:18 Msec=0 True Az=153.135 Ze=8.91 Az status=0009 Ze status=0009 17:33:18 Check angles 17:33:18 SkyScan query 17:33:19 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.075<-12805 Statuses=0009 0009 17:33:19 Msec=750 True Az=135.675 Ze=-12.075 Az status=0009 Ze status=0009 17:33:19 Check angles 17:33:19 SkyScan query 17:33:19 SkyScan query done: ret=0 az=118.17<-7878 ze=-33<-14200 Statuses=0009 0009 17:33:19 Msec=1500 True Az=118.17 Ze=-33 Az status=0009 Ze status=0009 17:33:19 Check angles 17:33:19 SkyScan query 17:33:20 SkyScan query done: ret=0 az=100.725<-6715 ze=-51.525<-15435 Statuses=0009 0009 17:33:20 Msec=2250 True Az=100.725 Ze=-51.525 Az status=0009 Ze status=0009 17:33:20 Check angles 17:33:20 SkyScan query 17:33:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 17:33:21 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 17:33:21 Check angles 17:33:21 SkyScan query 17:33:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:33:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:33:22 Message to Master queued w/err=0: serial=281934 error=0 17:33:27 Received message from Master: op=Filter serial=281935 17:33:27 Color wheel filter change from 0 to 0 17:33:27 FLIGetFilterPos err=0 currentPosition=0 17:33:27 FLIGetStepsRemaining err=0 RemainingSteps=0 17:33:27 Filter is already there-color wheel unchanged 17:33:27 Received message from Master: op=Shutter serial=281936 17:33:27 Shutter LASER close 17:33:27 Received message from Camera: op=State serial=281938 17:33:27 GetSingleValue result=40 Value=cccccccc 17:33:27 SkyScan query 17:33:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:33:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:33:27 Parameters OK 17:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:33:27 Set A/D data flow result=40 17:33:27 Set A/D channel type result=40 17:33:27 Set A/D encoding result=40 17:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:33:27 Set channel filter=0.000000e+000 result=40 17:33:27 Config A/D Result=40 17:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:33:27 Get A/D filter: -9.255963e+061 result=40 17:33:27 Get A/D value=-858993460 result=40 17:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:33:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:33:27 Parameters OK 17:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:33:27 Set A/D data flow result=40 17:33:27 Set A/D channel type result=40 17:33:27 Set A/D encoding result=40 17:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:33:27 Set channel filter=0.000000e+000 result=40 17:33:27 Config A/D Result=40 17:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:33:27 Get A/D filter: -9.255963e+061 result=40 17:33:27 Get A/D value=-858993460 result=40 17:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:33:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:33:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:33:27 Aux= 17:33:27 Message to Camera, serial 281938 queued 17:34:04 Received message from Master: op=PointingHead serial=281951 17:34:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:34:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:34:05 Point started: ret=0 17:34:05 point_skyscan result=0 17:34:05 Check angles 17:34:05 SkyScan query 17:34:06 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.285<-17419 Statuses=0009 0009 17:34:06 Msec=0 True Az=109.035 Ze=-81.285 Az status=0009 Ze status=0009 17:34:06 Check angles 17:34:06 SkyScan query 17:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 17:34:07 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 17:34:07 Check angles 17:34:07 SkyScan query 17:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.21<-20214 Statuses=0008 0009 17:34:07 Msec=1500 True Az=112.995 Ze=-123.21 Az status=0008 Ze status=0009 17:34:08 Check angles 17:34:08 SkyScan query 17:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.15<-21610 Statuses=0008 0009 17:34:08 Msec=2250 True Az=112.995 Ze=-144.15 Az status=0008 Ze status=0009 17:34:08 Check angles 17:34:08 SkyScan query 17:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.105<-23007 Statuses=0008 0009 17:34:09 Msec=3000 True Az=112.995 Ze=-165.105 Az status=0008 Ze status=0009 17:34:09 Check angles 17:34:09 SkyScan query 17:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:34:10 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:34:10 Message to Master queued w/err=0: serial=281951 error=0 17:34:15 Received message from Master: op=Filter serial=281952 17:34:15 Color wheel filter change from 0 to 0 17:34:15 FLIGetFilterPos err=0 currentPosition=0 17:34:15 FLIGetStepsRemaining err=0 RemainingSteps=0 17:34:15 Filter is already there-color wheel unchanged 17:34:15 Received message from Master: op=Shutter serial=281953 17:34:15 Shutter LASER open 17:34:15 Received message from Camera: op=State serial=281955 17:34:15 GetSingleValue result=40 Value=cccccccc 17:34:15 SkyScan query 17:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:34:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:16 Parameters OK 17:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:16 Set A/D data flow result=40 17:34:16 Set A/D channel type result=40 17:34:16 Set A/D encoding result=40 17:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:16 Set channel filter=0.000000e+000 result=40 17:34:16 Config A/D Result=40 17:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:16 Get A/D filter: -9.255963e+061 result=40 17:34:16 Get A/D value=-858993460 result=40 17:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:16 Parameters OK 17:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:16 Set A/D data flow result=40 17:34:16 Set A/D channel type result=40 17:34:16 Set A/D encoding result=40 17:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:16 Set channel filter=0.000000e+000 result=40 17:34:16 Config A/D Result=40 17:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:16 Get A/D filter: -9.255963e+061 result=40 17:34:16 Get A/D value=-858993460 result=40 17:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:34:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:34:16 Aux= 17:34:16 Message to Camera, serial 281955 queued 17:34:24 Received message from Master: op=Shutter serial=281965 17:34:24 Shutter LASER close 17:34:24 Received message from Master: op=PointingHead serial=281969 17:34:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:34:24 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:34:25 Point started: ret=0 17:34:25 point_skyscan result=0 17:34:26 Check angles 17:34:26 SkyScan query 17:34:26 SkyScan query done: ret=0 az=89.625<-5975 ze=156.945<-1537 Statuses=0009 0009 17:34:26 Msec=0 True Az=89.625 Ze=156.945 Az status=0009 Ze status=0009 17:34:26 Check angles 17:34:26 SkyScan query 17:34:27 SkyScan query done: ret=0 az=72.24<-4816 ze=136.065<-2929 Statuses=0009 0009 17:34:27 Msec=750 True Az=72.24 Ze=136.065 Az status=0009 Ze status=0009 17:34:27 Check angles 17:34:27 SkyScan query 17:34:28 SkyScan query done: ret=0 az=54.765<-3651 ze=115.125<-4325 Statuses=0009 0009 17:34:28 Msec=1500 True Az=54.765 Ze=115.125 Az status=0009 Ze status=0009 17:34:28 Check angles 17:34:28 SkyScan query 17:34:28 SkyScan query done: ret=0 az=40.995<-2733 ze=94.14<-5724 Statuses=0009 0009 17:34:28 Msec=2250 True Az=40.995 Ze=94.14 Az status=0009 Ze status=0009 17:34:29 Check angles 17:34:29 SkyScan query 17:34:29 SkyScan query done: ret=0 az=40.995<-2733 ze=73.125<-7125 Statuses=0008 0009 17:34:29 Msec=3000 True Az=40.995 Ze=73.125 Az status=0008 Ze status=0009 17:34:29 Check angles 17:34:29 SkyScan query 17:34:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 17:34:30 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 17:34:30 Check angles 17:34:30 SkyScan query 17:34:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:34:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:34:31 Message to Master queued w/err=0: serial=281969 error=0 17:34:36 Received message from Master: op=Filter serial=281970 17:34:36 Color wheel filter change from 0 to 0 17:34:36 FLIGetFilterPos err=0 currentPosition=0 17:34:36 FLIGetStepsRemaining err=0 RemainingSteps=0 17:34:36 Filter is already there-color wheel unchanged 17:34:36 Received message from Master: op=Shutter serial=281971 17:34:36 Shutter LASER close 17:34:36 Received message from Camera: op=State serial=281973 17:34:36 GetSingleValue result=40 Value=cccccccc 17:34:36 SkyScan query 17:34:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:34:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:37 Parameters OK 17:34:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:37 Set A/D data flow result=40 17:34:37 Set A/D channel type result=40 17:34:37 Set A/D encoding result=40 17:34:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:37 Set channel filter=0.000000e+000 result=40 17:34:37 Config A/D Result=40 17:34:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:37 Get A/D filter: -9.255963e+061 result=40 17:34:37 Get A/D value=-858993460 result=40 17:34:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:37 Parameters OK 17:34:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:37 Set A/D data flow result=40 17:34:37 Set A/D channel type result=40 17:34:37 Set A/D encoding result=40 17:34:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:37 Set channel filter=0.000000e+000 result=40 17:34:37 Config A/D Result=40 17:34:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:37 Get A/D filter: -9.255963e+061 result=40 17:34:37 Get A/D value=-858993460 result=40 17:34:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:34:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:34:37 Aux= 17:34:37 Message to Camera, serial 281973 queued 17:35:13 Received message from Master: op=PointingHead serial=281986 17:35:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:35:13 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:35:14 Point started: ret=0 17:35:14 point_skyscan result=0 17:35:15 Check angles 17:35:15 SkyScan query 17:35:15 SkyScan query done: ret=0 az=64.035<-4269 ze=66.54<-7564 Statuses=0009 0008 17:35:15 Msec=0 True Az=64.035 Ze=66.54 Az status=0009 Ze status=0008 17:35:15 Check angles 17:35:15 SkyScan query 17:35:16 SkyScan query done: ret=0 az=81.72<-5448 ze=66.51<-7566 Statuses=0009 0008 17:35:16 Msec=750 True Az=81.72 Ze=66.51 Az status=0009 Ze status=0008 17:35:16 Check angles 17:35:16 SkyScan query 17:35:17 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 17:35:17 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 17:35:17 Check angles 17:35:17 SkyScan query 17:35:17 SkyScan query done: ret=0 az=116.745<-7783 ze=66.495<-7567 Statuses=0009 0008 17:35:17 Msec=2250 True Az=116.745 Ze=66.495 Az status=0009 Ze status=0008 17:35:18 Check angles 17:35:18 SkyScan query 17:35:18 SkyScan query done: ret=0 az=134.145<-8943 ze=66.495<-7567 Statuses=0009 0008 17:35:18 Msec=3000 True Az=134.145 Ze=66.495 Az status=0009 Ze status=0008 17:35:18 Check angles 17:35:18 SkyScan query 17:35:19 SkyScan query done: ret=0 az=151.575<-10105 ze=66.495<-7567 Statuses=0009 0008 17:35:19 Msec=3750 True Az=151.575 Ze=66.495 Az status=0009 Ze status=0008 17:35:19 Check angles 17:35:19 SkyScan query 17:35:20 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:35:20 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:35:20 Message to Master queued w/err=0: serial=281986 error=0 17:35:25 Received message from Master: op=Filter serial=281987 17:35:25 Color wheel filter change from 0 to 0 17:35:25 FLIGetFilterPos err=0 currentPosition=0 17:35:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:35:25 Filter is already there-color wheel unchanged 17:35:25 Received message from Master: op=Shutter serial=281988 17:35:25 Shutter LASER close 17:35:25 Received message from Camera: op=State serial=281990 17:35:25 GetSingleValue result=40 Value=cccccccc 17:35:25 SkyScan query 17:35:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:35:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:35:25 Parameters OK 17:35:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:35:25 Set A/D data flow result=40 17:35:25 Set A/D channel type result=40 17:35:25 Set A/D encoding result=40 17:35:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:35:25 Set channel filter=0.000000e+000 result=40 17:35:25 Config A/D Result=40 17:35:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:35:25 Get A/D filter: -9.255963e+061 result=40 17:35:25 Get A/D value=-858993460 result=40 17:35:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:35:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:35:25 Parameters OK 17:35:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:35:25 Set A/D data flow result=40 17:35:25 Set A/D channel type result=40 17:35:25 Set A/D encoding result=40 17:35:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:35:25 Set channel filter=0.000000e+000 result=40 17:35:25 Config A/D Result=40 17:35:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:35:25 Get A/D filter: -9.255963e+061 result=40 17:35:25 Get A/D value=-858993460 result=40 17:35:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:35:25 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:35:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:35:25 Aux= 17:35:25 Message to Camera, serial 281990 queued [UTC 2018-12-19 17:35:52] 17:36:01 Received message from Master: op=PointingHead serial=282002 17:36:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:36:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:36:02 Point started: ret=0 17:36:02 point_skyscan result=0 17:36:02 Check angles 17:36:02 SkyScan query 17:36:03 SkyScan query done: ret=0 az=134.865<-8991 ze=36.84<-9544 Statuses=0009 0009 17:36:03 Msec=0 True Az=134.865 Ze=36.84 Az status=0009 Ze status=0009 17:36:03 Check angles 17:36:03 SkyScan query 17:36:04 SkyScan query done: ret=0 az=117.135<-7809 ze=15.48<-10968 Statuses=0009 0009 17:36:04 Msec=750 True Az=117.135 Ze=15.48 Az status=0009 Ze status=0009 17:36:04 Check angles 17:36:04 SkyScan query 17:36:04 SkyScan query done: ret=0 az=99.645<-6643 ze=-5.52<-12368 Statuses=0009 0009 17:36:04 Msec=1500 True Az=99.645 Ze=-5.52 Az status=0009 Ze status=0009 17:36:05 Check angles 17:36:05 SkyScan query 17:36:05 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.49<-13766 Statuses=0009 0009 17:36:05 Msec=2250 True Az=82.26 Ze=-26.49 Az status=0009 Ze status=0009 17:36:05 Check angles 17:36:05 SkyScan query 17:36:06 SkyScan query done: ret=0 az=64.245<-4283 ze=-38.58<-14572 Statuses=0009 0008 17:36:06 Msec=3000 True Az=64.245 Ze=-38.58 Az status=0009 Ze status=0008 17:36:06 Check angles 17:36:06 SkyScan query 17:36:07 SkyScan query done: ret=0 az=46.545<-3103 ze=-38.52<-14568 Statuses=0009 0008 17:36:07 Msec=3750 True Az=46.545 Ze=-38.52 Az status=0009 Ze status=0008 17:36:07 Check angles 17:36:07 SkyScan query 17:36:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:36:07 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:36:07 Message to Master queued w/err=0: serial=282002 error=0 17:36:12 Received message from Master: op=Filter serial=282003 17:36:12 Color wheel filter change from 0 to 0 17:36:12 FLIGetFilterPos err=0 currentPosition=0 17:36:12 FLIGetStepsRemaining err=0 RemainingSteps=0 17:36:12 Filter is already there-color wheel unchanged 17:36:13 Received message from Master: op=Shutter serial=282004 17:36:13 Shutter LASER close 17:36:13 Received message from Camera: op=State serial=282006 17:36:13 GetSingleValue result=40 Value=cccccccc 17:36:13 SkyScan query 17:36:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:36:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:13 Parameters OK 17:36:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:13 Set A/D data flow result=40 17:36:13 Set A/D channel type result=40 17:36:13 Set A/D encoding result=40 17:36:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:13 Set channel filter=0.000000e+000 result=40 17:36:13 Config A/D Result=40 17:36:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:13 Get A/D filter: -9.255963e+061 result=40 17:36:13 Get A/D value=-858993460 result=40 17:36:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:13 Parameters OK 17:36:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:13 Set A/D data flow result=40 17:36:13 Set A/D channel type result=40 17:36:13 Set A/D encoding result=40 17:36:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:13 Set channel filter=0.000000e+000 result=40 17:36:13 Config A/D Result=40 17:36:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:13 Get A/D filter: -9.255963e+061 result=40 17:36:13 Get A/D value=-858993460 result=40 17:36:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:36:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:36:13 Aux= 17:36:13 Message to Camera, serial 282006 queued 17:36:50 Received message from Master: op=PointingHead serial=282019 17:36:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:36:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:36:50 Point started: ret=0 17:36:50 point_skyscan result=0 17:36:51 Check angles 17:36:51 SkyScan query 17:36:52 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.46<-16564 Statuses=0009 0009 17:36:52 Msec=0 True Az=64.215 Ze=-68.46 Az status=0009 Ze status=0009 17:36:52 Check angles 17:36:52 SkyScan query 17:36:53 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.43<-17962 Statuses=0009 0009 17:36:53 Msec=750 True Az=81.585 Ze=-89.43 Az status=0009 Ze status=0009 17:36:53 Check angles 17:36:53 SkyScan query 17:36:53 SkyScan query done: ret=0 az=99.045<-6603 ze=-110.385<-19359 Statuses=0009 0009 17:36:53 Msec=1500 True Az=99.045 Ze=-110.385 Az status=0009 Ze status=0009 17:36:53 Check angles 17:36:53 SkyScan query 17:36:54 SkyScan query done: ret=0 az=116.505<-7767 ze=-131.31<-20754 Statuses=0009 0009 17:36:54 Msec=2250 True Az=116.505 Ze=-131.31 Az status=0009 Ze status=0009 17:36:54 Check angles 17:36:54 SkyScan query 17:36:55 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 17:36:55 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 17:36:55 Check angles 17:36:55 SkyScan query 17:36:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 17:36:56 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 17:36:56 Message to Master queued w/err=0: serial=282019 error=0 17:37:01 Received message from Master: op=Filter serial=282020 17:37:01 Color wheel filter change from 0 to 0 17:37:01 FLIGetFilterPos err=0 currentPosition=0 17:37:01 FLIGetStepsRemaining err=0 RemainingSteps=0 17:37:01 Filter is already there-color wheel unchanged 17:37:01 Received message from Master: op=Shutter serial=282021 17:37:01 Shutter LASER close 17:37:01 Received message from Camera: op=State serial=282023 17:37:01 GetSingleValue result=40 Value=cccccccc 17:37:01 SkyScan query 17:37:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:37:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:01 Parameters OK 17:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:01 Set A/D data flow result=40 17:37:01 Set A/D channel type result=40 17:37:01 Set A/D encoding result=40 17:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:01 Set channel filter=0.000000e+000 result=40 17:37:01 Config A/D Result=40 17:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:01 Get A/D filter: -9.255963e+061 result=40 17:37:01 Get A/D value=-858993460 result=40 17:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:01 Parameters OK 17:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:01 Set A/D data flow result=40 17:37:01 Set A/D channel type result=40 17:37:01 Set A/D encoding result=40 17:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:01 Set channel filter=0.000000e+000 result=40 17:37:01 Config A/D Result=40 17:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:01 Get A/D filter: -9.255963e+061 result=40 17:37:01 Get A/D value=-858993460 result=40 17:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:37:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:37:01 Aux= 17:37:01 Message to Camera, serial 282023 queued 17:37:38 Received message from Master: op=PointingHead serial=282036 17:37:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:37:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:37:38 Point started: ret=0 17:37:38 point_skyscan result=0 17:37:39 Check angles 17:37:39 SkyScan query 17:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0009 0009 17:37:40 Msec=0 True Az=112.995 Ze=-170.91 Az status=0009 Ze status=0009 17:37:40 Check angles 17:37:40 SkyScan query 17:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:37:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:37:41 Message to Master queued w/err=0: serial=282036 error=0 17:37:46 Received message from Master: op=Filter serial=282037 17:37:46 Color wheel filter change from 0 to 0 17:37:46 FLIGetFilterPos err=0 currentPosition=0 17:37:46 FLIGetStepsRemaining err=0 RemainingSteps=0 17:37:46 Filter is already there-color wheel unchanged 17:37:46 Received message from Master: op=Shutter serial=282038 17:37:46 Shutter LASER open 17:37:46 Received message from Camera: op=State serial=282040 17:37:46 GetSingleValue result=40 Value=cccccccc 17:37:46 SkyScan query 17:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:37:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:47 Parameters OK 17:37:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:47 Set A/D data flow result=40 17:37:47 Set A/D channel type result=40 17:37:47 Set A/D encoding result=40 17:37:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:47 Set channel filter=0.000000e+000 result=40 17:37:47 Config A/D Result=40 17:37:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:47 Get A/D filter: -9.255963e+061 result=40 17:37:47 Get A/D value=-858993460 result=40 17:37:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:47 Parameters OK 17:37:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:47 Set A/D data flow result=40 17:37:47 Set A/D channel type result=40 17:37:47 Set A/D encoding result=40 17:37:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:47 Set channel filter=0.000000e+000 result=40 17:37:47 Config A/D Result=40 17:37:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:47 Get A/D filter: -9.255963e+061 result=40 17:37:47 Get A/D value=-858993460 result=40 17:37:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:37:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:37:47 Aux= 17:37:47 Message to Camera, serial 282040 queued 17:37:55 Received message from Master: op=Shutter serial=282050 17:37:55 Shutter LASER close 17:37:56 Received message from Master: op=PointingHead serial=282054 17:37:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:37:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:37:56 Point started: ret=0 17:37:56 point_skyscan result=0 17:37:57 Check angles 17:37:57 SkyScan query 17:37:57 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.77<-21518 Statuses=0009 0009 17:37:57 Msec=0 True Az=136.365 Ze=-142.77 Az status=0009 Ze status=0009 17:37:57 Check angles 17:37:57 SkyScan query 17:37:58 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.845<-20123 Statuses=0009 0009 17:37:58 Msec=750 True Az=153.9 Ze=-121.845 Az status=0009 Ze status=0009 17:37:58 Check angles 17:37:58 SkyScan query 17:37:59 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.785<-18719 Statuses=0009 0009 17:37:59 Msec=1500 True Az=171.39 Ze=-100.785 Az status=0009 Ze status=0009 17:37:59 Check angles 17:37:59 SkyScan query 17:37:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.92<-17328 Statuses=0008 0009 17:37:59 Msec=2250 True Az=175.995 Ze=-79.92 Az status=0008 Ze status=0009 17:38:00 Check angles 17:38:00 SkyScan query 17:38:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.92<-15928 Statuses=0008 0009 17:38:00 Msec=3000 True Az=175.995 Ze=-58.92 Az status=0008 Ze status=0009 17:38:00 Check angles 17:38:00 SkyScan query 17:38:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:38:01 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:38:01 Message to Master queued w/err=0: serial=282054 error=0 17:38:06 Received message from Master: op=Filter serial=282055 17:38:06 Color wheel filter change from 0 to 0 17:38:06 FLIGetFilterPos err=0 currentPosition=0 17:38:06 FLIGetStepsRemaining err=0 RemainingSteps=0 17:38:06 Filter is already there-color wheel unchanged 17:38:06 Received message from Master: op=Shutter serial=282056 17:38:06 Shutter LASER close 17:38:06 Received message from Camera: op=State serial=282058 17:38:06 GetSingleValue result=40 Value=cccccccc 17:38:06 SkyScan query 17:38:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:38:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:07 Parameters OK 17:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:07 Set A/D data flow result=40 17:38:07 Set A/D channel type result=40 17:38:07 Set A/D encoding result=40 17:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:07 Set channel filter=0.000000e+000 result=40 17:38:07 Config A/D Result=40 17:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:07 Get A/D filter: -9.255963e+061 result=40 17:38:07 Get A/D value=-858993460 result=40 17:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:07 Parameters OK 17:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:07 Set A/D data flow result=40 17:38:07 Set A/D channel type result=40 17:38:07 Set A/D encoding result=40 17:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:07 Set channel filter=0.000000e+000 result=40 17:38:07 Config A/D Result=40 17:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:07 Get A/D filter: -9.255963e+061 result=40 17:38:07 Get A/D value=-858993460 result=40 17:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:38:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:38:07 Aux= 17:38:07 Message to Camera, serial 282058 queued 17:38:44 Received message from Master: op=PointingHead serial=282071 17:38:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:38:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:38:44 Point started: ret=0 17:38:44 point_skyscan result=0 17:38:45 Check angles 17:38:45 SkyScan query 17:38:45 SkyScan query done: ret=0 az=152.865<-10191 ze=-21.75<-13450 Statuses=0009 0009 17:38:45 Msec=0 True Az=152.865 Ze=-21.75 Az status=0009 Ze status=0009 17:38:46 Check angles 17:38:46 SkyScan query 17:38:46 SkyScan query done: ret=0 az=135.03<-9002 ze=-0.345<-12023 Statuses=0009 0009 17:38:46 Msec=750 True Az=135.03 Ze=-0.345 Az status=0009 Ze status=0009 17:38:46 Check angles 17:38:46 SkyScan query 17:38:47 SkyScan query done: ret=0 az=117.585<-7839 ze=20.625<-10625 Statuses=0009 0009 17:38:47 Msec=1500 True Az=117.585 Ze=20.625 Az status=0009 Ze status=0009 17:38:47 Check angles 17:38:47 SkyScan query 17:38:48 SkyScan query done: ret=0 az=100.2<-6680 ze=41.61<-9226 Statuses=0009 0009 17:38:48 Msec=2250 True Az=100.2 Ze=41.61 Az status=0009 Ze status=0009 17:38:48 Check angles 17:38:48 SkyScan query 17:38:48 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 17:38:48 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 17:38:49 Check angles 17:38:49 SkyScan query 17:38:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:38:49 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:38:49 Message to Master queued w/err=0: serial=282071 error=0 17:38:54 Received message from Master: op=Filter serial=282072 17:38:54 Color wheel filter change from 0 to 0 17:38:54 FLIGetFilterPos err=0 currentPosition=0 17:38:54 FLIGetStepsRemaining err=0 RemainingSteps=0 17:38:54 Filter is already there-color wheel unchanged 17:38:54 Received message from Master: op=Shutter serial=282073 17:38:54 Shutter LASER close 17:38:54 Received message from Camera: op=State serial=282075 17:38:54 GetSingleValue result=40 Value=cccccccc 17:38:54 SkyScan query 17:38:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:38:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:55 Parameters OK 17:38:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:55 Set A/D data flow result=40 17:38:55 Set A/D channel type result=40 17:38:55 Set A/D encoding result=40 17:38:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:55 Set channel filter=0.000000e+000 result=40 17:38:55 Config A/D Result=40 17:38:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:55 Get A/D filter: -9.255963e+061 result=40 17:38:55 Get A/D value=-858993460 result=40 17:38:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:55 Parameters OK 17:38:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:55 Set A/D data flow result=40 17:38:55 Set A/D channel type result=40 17:38:55 Set A/D encoding result=40 17:38:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:55 Set channel filter=0.000000e+000 result=40 17:38:55 Config A/D Result=40 17:38:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:55 Get A/D filter: -9.255963e+061 result=40 17:38:55 Get A/D value=-858993460 result=40 17:38:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:38:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:38:55 Aux= 17:38:55 Message to Camera, serial 282075 queued 17:39:32 Received message from Master: op=PointingHead serial=282088 17:39:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:39:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:39:32 Point started: ret=0 17:39:32 point_skyscan result=0 17:39:33 Check angles 17:39:33 SkyScan query 17:39:34 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 17:39:34 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 17:39:34 Check angles 17:39:34 SkyScan query 17:39:34 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 17:39:34 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 17:39:34 Check angles 17:39:34 SkyScan query 17:39:35 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 17:39:35 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 17:39:35 Check angles 17:39:35 SkyScan query 17:39:36 SkyScan query done: ret=0 az=161.28<-10752 ze=38.505<-9433 Statuses=0009 0008 17:39:36 Msec=2250 True Az=161.28 Ze=38.505 Az status=0009 Ze status=0008 17:39:36 Check angles 17:39:36 SkyScan query 17:39:37 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:39:37 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:39:37 Check angles 17:39:37 SkyScan query 17:39:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:39:37 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:39:37 Message to Master queued w/err=0: serial=282088 error=0 17:39:42 Received message from Master: op=Filter serial=282089 17:39:42 Color wheel filter change from 0 to 0 17:39:42 FLIGetFilterPos err=0 currentPosition=0 17:39:42 FLIGetStepsRemaining err=0 RemainingSteps=0 17:39:42 Filter is already there-color wheel unchanged 17:39:42 Received message from Master: op=Shutter serial=282090 17:39:42 Shutter LASER close 17:39:43 Received message from Camera: op=State serial=282092 17:39:43 GetSingleValue result=40 Value=cccccccc 17:39:43 SkyScan query 17:39:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:39:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:39:43 Parameters OK 17:39:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:39:43 Set A/D data flow result=40 17:39:43 Set A/D channel type result=40 17:39:43 Set A/D encoding result=40 17:39:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:39:43 Set channel filter=0.000000e+000 result=40 17:39:43 Config A/D Result=40 17:39:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:39:43 Get A/D filter: -9.255963e+061 result=40 17:39:43 Get A/D value=-858993460 result=40 17:39:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:39:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:39:43 Parameters OK 17:39:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:39:43 Set A/D data flow result=40 17:39:43 Set A/D channel type result=40 17:39:43 Set A/D encoding result=40 17:39:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:39:43 Set channel filter=0.000000e+000 result=40 17:39:43 Config A/D Result=40 17:39:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:39:43 Get A/D filter: -9.255963e+061 result=40 17:39:43 Get A/D value=-858993460 result=40 17:39:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:39:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:39:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:39:43 Aux= 17:39:43 Message to Camera, serial 282092 queued 17:40:20 Received message from Master: op=PointingHead serial=282105 17:40:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:40:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:40:20 Point started: ret=0 17:40:20 point_skyscan result=0 17:40:21 Check angles 17:40:21 SkyScan query 17:40:22 SkyScan query done: ret=0 az=152.91<-10194 ze=8.565<-11429 Statuses=0009 0009 17:40:22 Msec=0 True Az=152.91 Ze=8.565 Az status=0009 Ze status=0009 17:40:22 Check angles 17:40:22 SkyScan query 17:40:22 SkyScan query done: ret=0 az=134.955<-8997 ze=-12.825<-12855 Statuses=0009 0009 17:40:22 Msec=750 True Az=134.955 Ze=-12.825 Az status=0009 Ze status=0009 17:40:23 Check angles 17:40:23 SkyScan query 17:40:23 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.93<-14262 Statuses=0009 0009 17:40:23 Msec=1500 True Az=117.54 Ze=-33.93 Az status=0009 Ze status=0009 17:40:23 Check angles 17:40:23 SkyScan query 17:40:24 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.57<-15438 Statuses=0009 0009 17:40:24 Msec=2250 True Az=100.185 Ze=-51.57 Az status=0009 Ze status=0009 17:40:24 Check angles 17:40:24 SkyScan query 17:40:25 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 17:40:25 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 17:40:25 Check angles 17:40:25 SkyScan query 17:40:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:40:25 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:40:25 Message to Master queued w/err=0: serial=282105 error=0 17:40:30 Received message from Master: op=Filter serial=282106 17:40:30 Color wheel filter change from 0 to 0 17:40:30 FLIGetFilterPos err=0 currentPosition=0 17:40:30 FLIGetStepsRemaining err=0 RemainingSteps=0 17:40:30 Filter is already there-color wheel unchanged 17:40:31 Received message from Master: op=Shutter serial=282107 17:40:31 Shutter LASER close 17:40:31 Received message from Camera: op=State serial=282109 17:40:31 GetSingleValue result=40 Value=cccccccc 17:40:31 SkyScan query 17:40:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:40:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:40:31 Parameters OK 17:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:40:31 Set A/D data flow result=40 17:40:31 Set A/D channel type result=40 17:40:31 Set A/D encoding result=40 17:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:40:31 Set channel filter=0.000000e+000 result=40 17:40:31 Config A/D Result=40 17:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:40:31 Get A/D filter: -9.255963e+061 result=40 17:40:31 Get A/D value=-858993460 result=40 17:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:40:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:40:31 Parameters OK 17:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:40:31 Set A/D data flow result=40 17:40:31 Set A/D channel type result=40 17:40:31 Set A/D encoding result=40 17:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:40:31 Set channel filter=0.000000e+000 result=40 17:40:31 Config A/D Result=40 17:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:40:31 Get A/D filter: -9.255963e+061 result=40 17:40:31 Get A/D value=-858993460 result=40 17:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:40:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:40:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:40:31 Aux= 17:40:31 Message to Camera, serial 282109 queued 17:41:08 Received message from Master: op=PointingHead serial=282122 17:41:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:41:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:41:08 Point started: ret=0 17:41:08 point_skyscan result=0 17:41:09 Check angles 17:41:09 SkyScan query 17:41:10 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.495<-17433 Statuses=0009 0009 17:41:10 Msec=0 True Az=109.17 Ze=-81.495 Az status=0009 Ze status=0009 17:41:10 Check angles 17:41:10 SkyScan query 17:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 17:41:10 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 17:41:11 Check angles 17:41:11 SkyScan query 17:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 17:41:11 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 17:41:11 Check angles 17:41:11 SkyScan query 17:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 17:41:12 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 17:41:12 Check angles 17:41:12 SkyScan query 17:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 17:41:13 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 17:41:13 Check angles 17:41:13 SkyScan query 17:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:41:13 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:41:13 Message to Master queued w/err=0: serial=282122 error=0 17:41:18 Received message from Master: op=Filter serial=282123 17:41:18 Color wheel filter change from 0 to 0 17:41:18 FLIGetFilterPos err=0 currentPosition=0 17:41:18 FLIGetStepsRemaining err=0 RemainingSteps=0 17:41:18 Filter is already there-color wheel unchanged 17:41:19 Received message from Master: op=Shutter serial=282124 17:41:19 Shutter LASER open 17:41:19 Received message from Camera: op=State serial=282126 17:41:19 GetSingleValue result=40 Value=cccccccc 17:41:19 SkyScan query 17:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:41:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:41:19 Parameters OK 17:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:41:19 Set A/D data flow result=40 17:41:19 Set A/D channel type result=40 17:41:19 Set A/D encoding result=40 17:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:41:19 Set channel filter=0.000000e+000 result=40 17:41:19 Config A/D Result=40 17:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:41:19 Get A/D filter: -9.255963e+061 result=40 17:41:19 Get A/D value=-858993460 result=40 17:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:41:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:41:19 Parameters OK 17:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:41:19 Set A/D data flow result=40 17:41:19 Set A/D channel type result=40 17:41:19 Set A/D encoding result=40 17:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:41:19 Set channel filter=0.000000e+000 result=40 17:41:19 Config A/D Result=40 17:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:41:19 Get A/D filter: -9.255963e+061 result=40 17:41:19 Get A/D value=-858993460 result=40 17:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:41:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:41:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:41:19 Aux= 17:41:19 Message to Camera, serial 282126 queued 17:41:28 Received message from Master: op=Shutter serial=282136 17:41:28 Shutter LASER close 17:41:29 Received message from Master: op=PointingHead serial=282140 17:41:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:41:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:41:29 Point started: ret=0 17:41:29 point_skyscan result=0 17:41:30 Check angles 17:41:30 SkyScan query 17:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:41:31 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:41:31 Message to Master queued w/err=0: serial=282140 error=0 17:41:36 Received message from Master: op=Filter serial=282141 17:41:36 Color wheel filter change from 0 to 2 17:41:36 FLIGetFilterPos err=0 currentPosition=0 17:41:36 FLIGetStepsRemaining err=0 RemainingSteps=0 17:41:39 FLISetFilterPos err=0 rqPosition=2 17:41:39 FLIGetStepsRemaining err=0 RemainingSteps=0 17:41:39 Check after 0.00 sec for filter wheel DIn/CWh=0 17:41:39 FLIGetFilterPos err=0 currentPosition=2 17:41:39 FLIGetStepsRemaining err=0 RemainingSteps=0 17:41:39 Received message from Master: op=Shutter serial=282142 17:41:39 Shutter LASER close 17:41:39 Received message from Camera: op=State serial=282144 17:41:39 GetSingleValue result=40 Value=cccccccc 17:41:39 SkyScan query 17:41:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:41:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:41:40 Parameters OK 17:41:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:41:40 Set A/D data flow result=40 17:41:40 Set A/D channel type result=40 17:41:40 Set A/D encoding result=40 17:41:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:41:40 Set channel filter=0.000000e+000 result=40 17:41:40 Config A/D Result=40 17:41:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:41:40 Get A/D filter: -9.255963e+061 result=40 17:41:40 Get A/D value=-858993460 result=40 17:41:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:41:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:41:40 Parameters OK 17:41:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:41:40 Set A/D data flow result=40 17:41:40 Set A/D channel type result=40 17:41:40 Set A/D encoding result=40 17:41:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:41:40 Set channel filter=0.000000e+000 result=40 17:41:40 Config A/D Result=40 17:41:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:41:40 Get A/D filter: -9.255963e+061 result=40 17:41:40 Get A/D value=-858993460 result=40 17:41:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:41:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:41:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:41:40 Aux= 17:41:40 Message to Camera, serial 282144 queued 17:41:46 Received message from Master: op=PointingHead serial=282155 17:41:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:41:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:41:46 Point started: ret=0 17:41:46 point_skyscan result=0 17:41:47 Check angles 17:41:47 SkyScan query 17:41:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:41:47 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:41:47 Message to Master queued w/err=0: serial=282155 error=0 17:41:52 Received message from Master: op=Filter serial=282156 17:41:52 Color wheel filter change from 2 to 2 17:41:52 FLIGetFilterPos err=0 currentPosition=2 17:41:52 FLIGetStepsRemaining err=0 RemainingSteps=0 17:41:52 Filter is already there-color wheel unchanged 17:41:52 Received message from Master: op=Shutter serial=282157 17:41:52 Shutter LASER close 17:41:53 Received message from Camera: op=State serial=282159 17:41:53 GetSingleValue result=40 Value=cccccccc 17:41:53 SkyScan query 17:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:41:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:41:53 Parameters OK 17:41:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:41:53 Set A/D data flow result=40 17:41:53 Set A/D channel type result=40 17:41:53 Set A/D encoding result=40 17:41:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:41:53 Set channel filter=0.000000e+000 result=40 17:41:53 Config A/D Result=40 17:41:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:41:53 Get A/D filter: -9.255963e+061 result=40 17:41:53 Get A/D value=-858993460 result=40 17:41:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:41:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:41:53 Parameters OK 17:41:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:41:53 Set A/D data flow result=40 17:41:53 Set A/D channel type result=40 17:41:53 Set A/D encoding result=40 17:41:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:41:53 Set channel filter=0.000000e+000 result=40 17:41:53 Config A/D Result=40 17:41:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:41:53 Get A/D filter: -9.255963e+061 result=40 17:41:53 Get A/D value=-858993460 result=40 17:41:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:41:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:41:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:41:53 Aux= 17:41:53 Message to Camera, serial 282159 queued 17:42:29 Received message from Master: op=PointingHead serial=282171 17:42:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:42:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:42:29 Point started: ret=0 17:42:29 point_skyscan result=0 17:42:30 Check angles 17:42:30 SkyScan query 17:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:42:31 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:42:31 Message to Master queued w/err=0: serial=282171 error=0 17:42:36 Received message from Master: op=Filter serial=282172 17:42:36 Color wheel filter change from 2 to 2 17:42:36 FLIGetFilterPos err=0 currentPosition=2 17:42:36 FLIGetStepsRemaining err=0 RemainingSteps=0 17:42:36 Filter is already there-color wheel unchanged 17:42:36 Received message from Master: op=Shutter serial=282173 17:42:36 Shutter LASER close 17:42:36 Received message from Camera: op=State serial=282175 17:42:36 GetSingleValue result=40 Value=cccccccc 17:42:36 SkyScan query 17:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:42:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:42:37 Parameters OK 17:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:42:37 Set A/D data flow result=40 17:42:37 Set A/D channel type result=40 17:42:37 Set A/D encoding result=40 17:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:42:37 Set channel filter=0.000000e+000 result=40 17:42:37 Config A/D Result=40 17:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:42:37 Get A/D filter: -9.255963e+061 result=40 17:42:37 Get A/D value=-858993460 result=40 17:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:42:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:42:37 Parameters OK 17:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:42:37 Set A/D data flow result=40 17:42:37 Set A/D channel type result=40 17:42:37 Set A/D encoding result=40 17:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:42:37 Set channel filter=0.000000e+000 result=40 17:42:37 Config A/D Result=40 17:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:42:37 Get A/D filter: -9.255963e+061 result=40 17:42:37 Get A/D value=-858993460 result=40 17:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:42:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:42:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:42:37 Aux= 17:42:37 Message to Camera, serial 282175 queued 17:42:45 Received message from Master: op=Log close serial=282189 17:42:45 Log file close 17:42:45 * END OF LOG *